USB MODULE
4469 en - 2013.08 / c
Ready
Stop
Run
Start
Trip Local
Reset
LCL
RMT
iven
g
e
b
s to
i
l
a
nu
se r
a
u
m
d
This o the en
t
USB MODULE
Communications module
User Guide
General Information
The manufacturer accepts no liability for any consequences resulting from inappropriate, negligent or incorrect installation or
adjustment of the optional parameters of the equipment or from mismatching the starter with the motor.
The contents of this guide are believed to be correct at the time of printing. In the interests of commitment to a policy of continuous
development and improvement, the manufacturer reserves the right to change the specification of the product or its performance, or
the content of the guide without notice.
All rights reserved. No parts of this guide may be reproduced or transmitted in any form or by any means, electrical or mechanical
including, photocopying, recording or by an information storage or retrieval system, without permission in writing from the publisher.
Copyright © August 2013 LEROY SOMER
Issue C
Contents
1. 2. 3. Introduction ....................................................................................................................................................... 4 Important User Information .............................................................................................................................. 4 Installation ......................................................................................................................................................... 4 4. 5. 6. Connection ........................................................................................................................................................ 5 Configuration .................................................................................................................................................... 6 Specifications.................................................................................................................................................... 7 3.1 3.2 Installation Procedure ................................................................................................................................................................ 4 Physical installation .................................................................................................................................................................... 4 USB Module User Guide
Issue C
3
www.leroy-somer.com
1.
Introduction
The USB Module can be used in conjunction with Digistart-Soft to manage LEROY-SOMER soft starters.
These instructions detail the installation, set-up and configuration of the USB Module. For details on using Digistart-Soft, refer to the
Digistart-Soft help file.
NOTE
2.
For Digistart Soft to communicate with a soft starter via the USB Interface, Digistart Soft must be configured to use the
AP ASCII or AP Binary protocols.
Important User Information
Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start
without warning.
It is the installer's responsibility to follow all instructions in this manual and to follow correct electrical practice.
3.
Installation
Remove mains and control voltage from the soft starter before attaching or removing accessories. Failure to do so may
damage the equipment.
CAUTION
3.1
Installation Procedure
1. Remove control power and mains supply from the soft starter.
2. Attach the module to the soft starter as illustrated.
3. Apply control power to the soft starter.
3.2
Physical installation
1. Fully pull out the top and bottom retaining clips on the module.
2. Line up the module with the comms port slot.
3. Push in the top and bottom retaining clips to secure the module to the starter.
Figure 3-1 Attach the module to the starter
2
3
10178.B
1
Figure 3-2 Remove the module from the starter
03550.B
Remove the module using the following procedure:
1. Remove control power and mains supply from the soft starter.
2. Take the module off-line.
3. Disconnect all external wiring from the module.
4. Fully pull out the top and bottom retaining clips on the module.
5. Pull the module away from the soft starter.
4
www.leroy-somer.com
USB Module User Guide
Issue C
4.
Connection
Figure 4-1 USB Module connections
1
1
2
2
09528.A
3
Digistart D3
3
Digistart D2
Digistart D3 (Remote mode)
CSL, DI2: Stop input
DI2, +24V: Stop input
09529.A
Digistart D2
DI3, +24V: Reset input
USB Module
USB Module
USB port
USB port
Digistart D2: For the USB Module to accept serial commands, a link must be fitted across terminals CSL-DI2 on the soft starter.
Digistart D3: Input links are required across the stop and reset inputs if the soft starter is being operated in Remote mode. In Local
mode, links are not required.
If the Starter Disable function is not required, change the setting of Pr 3A or connect a link across DI4, +24V.
NOTE
Digistart D3: Control via the serial communication network is always enabled in local control mode, and can be enabled
or disabled in remote control mode (Pr 3O Comms in Remote). See the soft starter user manual for parameter details.
USB Module User Guide
Issue C
5
www.leroy-somer.com
5.
Configuration
To bring the USB Module on-line:
1. Remove control power and mains supply from the soft starter.
2. Attach the module to the soft starter as illustrated.
3. Connect the module to the PC via a USB cable. The PC should detect the module and the Hardware Update Wizard will
open.
4. Install the USB driver to operate the module as follows.
The driver can be downloaded from www.leroy-somer.com.
Welcome to the Found New
Hardware Wizard
Windows will search for current and updated software by
looking on your computer, on the hardware installation CD, or on
the Windows Update Web site (with your permission).
Read our privacy policy
This wizard helps you install software for:
FT232R USB UART
If your hardware came with an installation CD
or floppy disk, insert it now.
Can Windows connect to Windows Update to search for
software?
Yes, this time only
What do you want the wizard to do?
Yes, now and every time I connect a device
Install the software automatically (Recommended)
No, not this time
Install from a list or specific location (Advanced)
Click Next to continue.
08588.A
Click Next to continue.
Please choose your search and installation options.
Select the folder that contains drivers for your hardware.
Search for the best driver in these locations.
Use the check boxes below to limit or expand the default search, which includes local
paths and removable media. The best driver found will be installed.
Search removable media (floppy, CD-ROM...)
My Documents
My Computer
My Network Places
USB Comms Drivers
Include this location in the search
Win98_ME
Browse
C:\Documents and Settings\user\Desktop\USB Comm
WinXP_Vista
amd64
Don’t search. I will choose the driver to install.
To view any subfolders, click a plus sign above.
OK
< Back
Next >
Cancel
08589.A
i386
Choose this option to select the device driver from a list. Windows does not guarantee that
the driver you choose will be the best match for your hardware.
Cancel
Click on Ok, then Next. The software will install. If you see a prompt, click Continue Anyway. Once installation is complete, click
Finish.
5. The PC will prompt you to install serial port driver software. Repeat the procedure in Step 4. You may need to restart your
PC once the driver software is installed.
6. Identify the USB Serial Port assignment by checking Control panel > System > Hardware > Device Manager > Ports (COM &
LPT).
6
www.leroy-somer.com
USB Module User Guide
Issue C
NOTE
08590.A
Computer
Disk drives
Display adapters
DVD/CD-ROM drives
Floppy disk controllers
Floppy disk drives
Human Interface Devices
IDE ATA/ATAPI controllers
IEEE 1394 Bus host controllers
Keyboards
Mice and other pointing devices
Monitors
Network adapters
Ports (COM & LPT)
Communications Port (COM1)
ECP Printer Port (LPT1)
Intel(R) Active Management Technology - SOL (CO
USB Serial Port (COM5)
Processors
If the USB port is not shown, disconnect then reconnect the cable. If the problem persists, restart your PC.
7. Open Digistart-Soft and change the settings as follows:
Protocol:
Digistart D2 Series = ASCII; Digistart D3 = Binary
Baud rate: 9600
Address:
20
Port:
Use the serial port number identified above
8. Apply control voltage to the soft starter and bring the Master on-line.
NOTE
The starter may trip on Starter Comms while the Master is off-line. Reset the soft starter and place the Master on-line.
NOTE
The drivers will configure the USB port that the module is connected to. You must use the same physical USB port
every time you connect the module to the PC.
6.
Specifications
Enclosure
Dimensions ............................................................................................................................... 40 mm (W) x 166 mm (H) x 90 mm (D)
Weight .......................................................................................................................................................................................... 250 g
Protection ....................................................................................................................................................................................... IP20
Mounting
Spring-action plastic mounting clips (x 2)
Connections
Soft starter .............................................................................................................................................................. 6-way pin assembly
Network ...................................................................................................................................................................................... USB-B
Maximum cable length ..................................................................................................................................... 3 metres (not supplied)
Settings
Protocol ............................................................................................................................................................. AP Binary or AP ASCII
Address ............................................................................................................................................................................................. 20
Data rate (bps) .............................................................................................................................................................................. 9600
USB Module User Guide
Issue C
7
www.leroy-somer.com
8
www.leroy-somer.com
USB Module User Guide
Issue C
USB Module User Guide
Issue C
9
www.leroy-somer.com
10
www.leroy-somer.com
USB Module User Guide
Issue C
USB Module User Guide
Issue C
11
www.leroy-somer.com
MOTEURS LEROY-SOMER 16015 ANGOULÊME CEDEX - FRANCE
338 567 258 RCS ANGOULÊME
Simplified Joint Stock Company with capital of 65,800,512 €
www.leroy-somer.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement