Attention
:
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
B-C02
Smart air purifier
Health series · Commercial Use
Thank you for use this product which protected by intellectual property.
Please read this instruction manual carefully before use and keep it for future use.
If the parameter, specification and other information maybe changed, we will not notice specially, please refer to the actual machine.
The “optional” are optional functions, please kindly check with the retailer if your machine with these functions.
Smart air purifier
Health series · Commercial Use
Make an ecotypic home to avoid viruses
Environment self cicatrization produces " air vitamin "
●
It can generate 8 , 000 , 000 " air vitamin " every second which can improve the home environment.
Anti bacteria
Restrain the breeding and activity of viruses
●
UV light can efficiently kill bacteria and inhibit its activation
Healthy air
Healthy air is the basis of health and life
●
A child needs 400KG of air everyday, equal to 100 times of an adult needs water per day.
So it is very important to the health to improve the air environment of live.
CAUTIONS
WARNING
ATTENTION
PRODUCT PERFORMANCE
AND TECHNICAL FEATURES
Product performance
Technical features
COMPONENT INTRODUCTION
Diagram of the outlook
Diagram of unit
Operating parts
CAUTIONS BEFORE OPERATING
How to touch the control panel
Disassembling front cover
Installation of the filters
Power supply
Placement
1-3
2
3
5-6
5
5
6
4
4
4
7-8
7
7
8
8
8
DIRECTORY INDEX
OPERATING INSTRUCTION
Power setting
Function setting
Timer setting
Fan speed setting
Smart setting
Reset setting
Refresh setting
MAINTENANCE AND
CLEANING INSTRUCTION
Maintenance and cleaning instruction
Methods for replacing UV lamp
Disassembly and installation for UV lamp
FA Q
TECHNICAL PARAMETERS
Parameters of the unit
Filter parameters
UV parameters
13-14
13
13
14
15
16
16
16
16
9-12
9
9
10
10
11
12
12
1
CAUTIONS
In order to prevent harm or damage happened to users or others, be sure to comply with the requirement as below:
Warning/Attention
Warning
It reminds that misusing or mishandling may cause death .
Attention
It reminds that misusing or mishandling may cause hurt .
FORBID FORCE
If the power wire is broken,to prevent danger happend, please send it to agent,after-sales service or technical person for repair.
Smart air purifier
CAUTIONS
WARNING
Please supervise your children and avoid them from touching or using machine.
Do not connect or disconnect the power with wet hand
It may cause electrical shocking .
No disassembly,repair and reconstruction.
It may cause fire or damage.
Please send it to the retailer for repair.
Do not use the over run socket or wiring connector.Do use the rated voltage.
It may cause fire
Do plug the power into the socket completely.
It may cause fire because of heating or electrical shocking.
Do not use the damaged plug or loose socket
Avoid any water on the surface of the unit.
It may cause short circuit or electrical shocking.
AVOID WET
The appliance must be disconnected from the supply mains before cleaning or other maintenance
Otherwise the unit may start working in a sudden which may cause electrical shocking or hurt.
NO DISASSEMBLE
Do not insert any metal objects into the unit.
It may cause hurt or electric shocking
FORBID
Do not repair it when the cord or plug is damaged .
It may cause short circuit, electric shocking or fire.
Please send it to the retailer for repair.
If there is dust on the plug, it may weaken the insulation, even cause fire
Take out the plug and clean it with dry cloth.
Please remove the plug from the socket if not using for a long period.
AVOID WET
User manual
DISCONNECT POWER FORBID FORBID Do clean the plug termly
2
ATTENTION
ATTENTION
Do not power the unit on when using insecticide in the room
Otherwise the insecticide may be stored in the unit and will blow out during the normal working time.It is harmful to the health.
Please ventilate completely after having used the insecticide before turn on the unit.
Do not use in the room with lampblack such as kitchen.
It may cause hurt because the machine is not a ventilator
Do not blow in any combustible or fired cigarette into the unit.
It may cause fire
Do not use in the watery or high temperature room such as the bathroom etc.
Otherwise it may cause creepage, electric shocking or fire.
FORBID
Keep away from alcohol,organic impregnant or insecticide
It may cause cracking,short circuit, electric shocking, hurt or fire
Please ventilate timely when used with fire in the room
Otherwise it may cause poisoning ventilator
Please hold the plug instead of the cord when unplug the power .
Otherwise it may cause short circuit, breaking of the cord,electric shocking or fire.
Please remove the plug from the socket if any conditions as below:
● If all switches do not work
● If the power cord or plug hot
singularly
●
If any peculiar smell, exceptional
noise or vibration
● Any other abnormality or failure
3
If the power cord is damaged, please send it to the retailer or service center or technician for repairing. Do not change or repair it by yourself.
Smart air purifier
PRODUCT PERFORMANCE AND TECHNICAL FEATURES
Product performance
● Washable Pre-Filter: Effectively remove cotton flocculation, hair, mosquito or other slightly bigger particulate, improve HEPA lifetime.
● HEPA: Effectively remove PM2.5 by using new generation of composite material.
● Activated carbon: adopting the porous coconut made by modern biological carbonization synthesis technology , adsorption capacity is bigger , and can effectively remove smoke, formaldehyde.
● Photo catalyst: using titanium dioxide ( TiO2 ) material , its oxidation function can damage the filter captured the cell membrane of bacteria , inhibit virus activity .
● UV lamp: air is the main path leading to the spread of the virus , using UV air sterilization technology , the environment of natural bacteria killing rate can reach more than 96 %.
● Anion: negative ion is praised as Air Vitamin .
People live in the high negative ionic environment , can promote human new and old superseded , improve immunity.
Technical features
●
Air quality intelligent detection: built-in PM2 .
5 particle sensor .
●
IMD control panel: using a new generation of IMD technology, more convenient control.
●
Digital display: PM2 .
5 , temperature , humidity , timer indicator , more intuitive and easy to understand.
●
Automatic alarm: set filter , UV lamp replacement warning indicator .
●
ERP design: standby power ≤ 0 .
5W.
●
Japan DC motor: more quiet and more environmental.
User manual 4
COMPONENT INTRODUCTION
Diagram of the outlook
Air outlet
IMD Control Panel
Front Cover
Air In Air In
PM2.5 Sensor
Back Cover
Cable hole
Back View
Diagram of unit
Front View
5
Front cover Washable Pre-filter HEPA Activated Carbon+Photo Catalyst UV lamp Main Body
Smart air purifier
COMPONENT INTRODUCTION
Operating parts
●
Digital indicator
Temperature
%
●
Screen diagram
Filter replacement indicator
Humidity
%
Anion
UV lamp
Timer
% gi h e s s t p e e d
%
S le e p
m o
Reset
Function
Speed
Timer
Smart
Function Display Power on/off
PM2.5
%
User manual 6
CAUTIONS BEFORE OPERATING
How to touch the control panel?
●
Please touch the button with whole finger as following:
%
Reset
Function
Speed
Timer
Smart
Wrong
Disassembling front cover
●
Disassembling diagram
Hold on the front cover with two hands,and pull it out.
%
Reset
Function
Speed
Timer
Smart
Correct
●
Installation diagram
Insert two pins of bottom side into two slot of main body.
7
Disassembling diagram Installation diagram
Smart air purifier
CAUTIONS BEFORE OPERATING
Installation of the filters
● Take off front cover
● Take out the Pre-filter, HEPA, activated carbon + photo catalyst, tear off filters transparent bags and put them back into device accordingly.
1. Take off the front cover 2.
Install activated carbon
+photo catalyst
3.
Install HEPA
Power supply
● Please don't connect this machine with wrong voltage of power supply, inserting the plug firmly into the power socket.
4.
Install pre-filter 5. Install front cover
Placement
● Please keep the machine air inlet and outlet 30cm or more away from the wall and home furniture.
● Do not use the machine in front of heat source outlet.
User manual 8
OPERATING INSTRUCTION
Power setting
● To press the “power”icon on the product operating panel , machine is entered the initial working status.
The diagram as following:
%
9
Reset
Function
Speed
Timer
Smart
Function setting
● Press the "function" icon, Anion, and UV lamp can be chosen individually or multiply or close these two functions.
The diagram as following:
%
Anion
UV lamp
Reset
Function
Speed
Timer
Smart
Smart air purifier
OPERATING INSTRUCTION
Timer setting
● Long press "Timer" icon,the displayed digit is flashing,then the timer mode is started.
● Press"Timer"icon continuously, the time can be chosen from 0 to 12 hours, the device memory function will be started after waiting for 5 seconds.
The diagram as following:
%
Remark 1: Press time button on operation panel to preview how long time setting.
Remark 2: Hold on time button if you want to cancel time setting.
Remark 3: When time setting is finished/power off,machine turn to normal working mode.
Reset Smart
Function Timer
Speed
Fan speed setting
● Fan Speed " 1, 2, 3, 4 and Highest speed" can be selected afer pressing the "speed" icon on the operation panel.
● Sleep mode: pressing “speed” icon and hold on for 3 seconds, the sleep mode will be on, if pressing any icons, the sleep mode will be cancelled.
Remark 1: If machine is set as smart mode, the “speed” icon can't be adjusted.
Remark 2: Sleep mode is night mode , fan speed and noise are very low , all indicators are not lighted .
%
Reset
Function
Speed
Timer
Smart
P1:speed adjustment diagram
%
Reset
Function
Speed
Timer
Smart
P2:Sleep mode diagram
User manual 10
OPERATING INSTRUCTION
Smart setting
● PM2.5 Sensor built-in.
● Air quality indicator will be lighted after pressing the “Smart” icon on the product operating panel , the machine will check
the air quality and control its working status automatically.
● PM2.5 sensor: it's to check the dust or particles and display it by data.The diagram as following:
%
Speed
Level 1
Level 3
Level 5
Air quality indicator color
Green light
Orange light
Red light
PM2.5
≤ 35ug / m
3
36 150ug / m 3
≥ 151ug / m
3
Reset Smart
Timer
Function
Speed
● The number of PM2.5 particles, air quality status, and machine intelligently running status as below.
% % %
11
Reset Smart Reset Smart Reset Smart
Function Timer Function Timer Function Timer
Speed Speed Speed
Excellent （ Green light ）
Slight, medium pollution （ Orange ） Serious pollution
（
Red light
）
Remarks 1: The three smart light on the top is stand for air quality.
Remarks 2: when you choose " Smart " mode , the device will take 3 minutes to warm up , " function " icon can not use in this mode .
Remarks 3: when air humidity is above 80 %, it will affect the sensitivity of sensor , the PM2 .
5 data is just for your reference .
Smart air purifier
OPERATING INSTRUCTION
● PM2.5 abnormal correcting ：
After used the PM2.5 sensor for a long time, trace amounts of particulate will adhere to the sensor inductive head, it may cause the PM2.5 numerical display abnormal.When you find PM2.5 numerical severly deviated from the normal range, here we advise you collect it as follow steps based on the weather forecast's PM2.5 numerical in your city.
1.Open the window ventilated for 5 minutes(PM2.5 sensor will re-collection current environmental data).
2.Long press "function" icon, after heard a "click", showing it antomatic switch to PM2.5 display window, then enter PM2.5 correcting mode.
3
3.Each time you press "function" icon, the machine's PM2.5 numerical will increase 2ug/m , each time you press "smart" icon,
4.When the PM2.5 numerical adjust to the PM2.5 numerical of your city's weather forecast,waiting 5 seconds ， PM2.5 sensor collection finished.
Reset setting
● If the filter icons are always flashing, it means the filters life time comes to the end, please clean or replace new filters.
● After cleaning or replacing new filters, please press “Reset”icon, then filter icons will stop flashing, the machine starts
to record the filters using time.
Remark :”Reset” icon has refresh function,PM2.5 data can be refreshed after pressing the “ Reset” icon on the product operating panel .
Filter replacement indicator
%
Washable Pre-filter
Activated Carbon+Photo Catalyst
HEPA
Refresh setting
● Press " refresh" button to refresh PM2.5 value.
Reset
User manual
Function
Speed
Timer
Smart
12
MAINTENANCE AND CLEANING INSTRUCTION
Maintenance and cleaning instruction
Maintenance and cleaning instruction
Please remove plug from the socket before cleaning and maintenance .
Benzene Acohol
Decontamination power
Alkalescence
● Cleaning the body for this device by damp cloth, then wipe it dry.
● If machine is too dirty, neutral detergent can be used for cleaning, but please dilute the detergent before use.
● Do not clean the unit with the solvent listed on the right which may cause distortion or discolour.
Scour
13
Methods for replacing UV lamp
● Photo sensor is built-in the device, if the UV light is very weak or not lighted, the UV icon on the product operating
panel will be flashing; it means UV lamp should be replaced. The diagram as following:
%
UV lamp replacement indicator
Reset
Function
Speed
Timer
Smart
Smart air purifier
MAINTENANCE AND CLEANING INSTRUCTION
Disassembly and installation for UV lamp
● Take off the front cover, and take out all filters, then UV lamp can be replaced.The diagram as following:
Hold the UV lamp and rotate it for 90 clockwise or anticlockwise, then take it out.
Hold the UV lamp and rotate it for 90 clockwise or anticlockwise, then install it well.
User manual 14
15
FAQ
●
If the machine can't work properly,please kindly check as below before you send it out for repair .
Abnormal occurrence Checking methods
●
Please check if the plug is disconnected from the socket.
PM 2.5 Value keep too big or indicator stay red
●
Please check if the front cover is installed completely
Odor can not be removed.
●
Is there a very strong odor in the using environment?
(Notes:air should be purified continuously)
● Does the using life time for activated carbon filter
come to the end?
● Is the PE bag for filter removed?
High noise
● Does the using life time for HEPA come to the end?
Air quality indicator can not work properly
Small changes for humidity or temperature data
● Is the air humidity very high?
● Is the machine affected by kitchen oil fume or sprays?
●
Is the machine using area too big?
Solution
Power plug should be plugged properly
Recover the front cover correctly
Suggesting to ventilate,then start up the machine.
Please replace new filters.
Please take out filters and tear off PE bag.
Please replace new HEPA .
Please move the machine to another room to test again.
Please use this machine in applicable room.
If the problem is still existed after above inspections, please disconnect the power and send it for repair.
Smart air purifier
Parameters of the unit
Model No.: B-C02
Voltage Supply: 220V-240V,50Hz
Noise level dB(A):
Length of power cord:
≥ 660m /h
≤ 66 dB ( A )
≥ 1 .
4M
460×286×760(mm) Product size:
Net weight: 9.8kg
Power rating (W):
Applicable area:
107W
70-80m 2
User manual
TECHNICAL PARAMETERS
Filter parameters
Description
Pre-filter
HEPA
Activated Carbon
+Photo Catalyst
Size
554×329×6(mm)
Life time
554×329×29(mm) About 12 months
554×329×11(mm)
Washable
About 6 months
UV parameters
Description
UV lamp
Voltage Supply
220V 240V
Model
T5
Power rating
6W
Wave length
254nm
Life time
8000h
16
