1
DETAIL A-A
3
4
5
8
7
SEE
DETAIL A-A
2
PLEASE NOTE:
1) FOR SAFE OPERATION AND CONTINUED
HIGH PERFORMANCE FROM THIS EQUIPMENT,
INSPECTION AND MAINTENANCE MUST BE
PERFORMED BEFORE EACH USE
2) USE OF THIS EQUIPMENT OTHER THAN
INTENDED, MAY BE HAZARDOUS.
3) ALTERATION OR MODIFICATION OF EQUIP-
MENT MAY BE HAZARDOUS. FOR REPAIR OR
REPLACEMENT, PLEASE CALL YOUR DEALER
6
TAP END CAPS
INTO LEGS USING
A RUBBER MALLET
OR A BLOCK OF
WOOD
8" TYP
EACH END
Jaypro Sports
976 Hartford Turnpike
Waterford, CT 06385 USA
(800)243-0533
(800)988-3363 Fax www.jaypro.com
MODEL NO.:
PB40
PRODUCT NAME:
5' PLAYERS BENCH
WITH BACK REST
DRAWN BY: BTS
EFFECTIVE DATE:
9-27-17
JAYPRO SPORTS
5’ PLAYER’S BENCH WITH BACK REST, PB-40
LIST OF MATERIALS
PIECE NO. PART NO. DESCRIPTION
1 AR5044 Bolt Clip With Slot
2 AR5045 End Cap
3
4
5
6
7
8
HB5030
HN5046
HS5035
EP0018
AR5141
PB801
Carriage Bolt 5/16”-18 X 3”
5/16” Flange Nut
#8 Pan Head Screw x ½”
2” End Cap
5 Ft Seat Plank
Leg
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Phillips Screwdriver Bit With Electric Drill (1),
½” Socket Wrench Or Adjustable Wrench (1)
1) Slip the end caps (2) snugly onto each end of the plank (7). Using the electric drill, assemble a self-drilling screw (5) through the cap and into the flange of the plank. Two screws are required per end cap. Carefully assemble 2” end caps (6) into bench legs (8).
QTY.
8
4
8
8
8
8
2
2
2) For easiest assembly, position seat plank (7) on a level raised surface such as a desk top, bleacher seat or work bench. Place the carriage bolt (3) and bolt clips (1) approximately into place within the slots of the plank. Note that the legs should be no more than 8” from the plank edge.
4) Stand the unit upright and assemble the backrest plank (7) as illustrated.
Level the bench and make sure the legs are adequately spaced apart.
Tighten all fasteners fully.
3) Position the legs as shown and loosely assemble the hardware illustrated in detail ‘A-A’. Do not fully tighten the hardware at this time.
