User Manual

User Manual
Shield-LCD
User’s Manual
V1.0
July 2011
Information contained in this publication regarding device applications and the like is intended through suggestion only and may be
superseded by updates. It is your responsibility to ensure that your application meets with your specifications. No representation or
warranty is given and no liability is assumed by Cytron Technologies Incorporated with respect to the accuracy or use of such
information or infringement of patents or other intellectual property rights arising from such use or otherwise. Use of Cytron
Technologies’s products as critical components in life support systems is not authorized except with express written approval by Cytron
Technologies. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights.
1
ROBOT . HEAD to TOE
Product User’s Manual – Shield LCD
1. INTRODUCTION
The LCD Keypad shield is developed for Arduino compatible boards, to provide a userfriendly interface that allows users to go through the menu, make selections etc. It consists of
a 1602 white character blue backlight LCD. The keypad consists of 5 keys — select, up,
right, down and left. To save the digital IO pins, the keypad interface uses only one ADC
channel. The key value is read through a 5 stage voltage divider.
Features:
• Operate at 5V
• Uses Arduino LCD4Bit library
• Plug and Use with Arduino main board, no solder or fly-wiring needed.
• 2x16 LCD, White character, Blue backlight
• 6 push buttons
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
2
ROBOT . HEAD to TOE
Product User’s Manual – Shield LCD
2. BOARD LAYOUT
A
B
C
E
Label
Function
A
LCD Contrast potentiometer
B
ICSP
C
LCD Display
D
Label
Function
D
Reset Button
E
Push button connect to Analog Input
Pin0
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
3
ROBOT . HEAD to TOE
Product User’s Manual – Shield LCD
3. PIN ALLOCATION
Pin
Function
Analog 0
Button (select, up, right, down and left)
Digital 4
DB4
Digital 5
DB5
Digital 6
DB6
Digital 7
DB7
Digital 8
RS (Data or Signal Display Selection)
Digital 9
Enable
Digital 10
Backlight Control
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
4
ROBOT . HEAD to TOE
Product User’s Manual – Shield LCD
4. WARRANTY
Product warranty is valid for 6 months.
Warranty only applies to manufacturing defect.
Damage caused by mis-use is not covered under warranty.
Warranty does not cover freight cost for both ways.
Prepared by
Cytron Technologies Sdn. Bhd.
19, Jalan Kebudayaan 1A,
Taman Universiti,
81300 Skudai,
Johor, Malaysia.
Tel:
Fax:
+607-521 3178
+607-521 1861
URL: www.cytron.com.my
Email: [email protected]
[email protected]
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement