1. Safety
SENCOR
SDF 751
DIGITAL PHOTO FRAME
USER MANUAL
1. Safety
1.1 Intended use
The digital photo frame has been designed to display photos from memory device.
Due to the great variety of products with external memory connection (USB,SD/SDHC/MMC,etc.)
and their sometimes quite manufacturer-specific functions we can neither guarantee that all
devices will be recognized, nor that all operating options that are possible in theory will actually
work.
1.2 General safety instruction
WARNING
Do not force on the appliance. It will damage the appliance.
CAUTION
Do not spill any liquid on the appliance.
2. Preparation for use
2.1 Unpacking
Unpack the appliance carefully.
Check the package contents as described below. If any item is missing, please contact your
reseller.
Remove the label from the front panel carefully if present.
2.2 Package contents
The following items are including in the received package:
1 Digital photo frame
1 AC/DC adaptor+cable
1 Operator manual
2.3 Connecting to the mains
Connect the adaptor plug on the adaptor cable to the DC connection.
3. Functions
1.
2.
3.
4.
5.
CARD SLOT
USB
5V DC
EXIT
LEFT
6.
7.
8.
9.
10.
DOWN
ENTER
UP
RIGHT
MENU
4. Operation
4.1 Photo
1) When the digital photo frame is powered on for the first time it will start the picture
slideshow when the USB or Card with pictures is inserted. It will go to calendar first and
after 1-2 seconds to slideshow the picture. If the SD card or USB flash is inserted later ,
then it also automatically starts the presentation mode switching from calendar mode.
2) Depending on the picture setting the DPF will switch to a slideshow of the pictures or to a
single picture in browse mode or to thumbnail mode of the pictures stored on the inserted
memory card or USB
3) If no memory card or USB with pictures is inserted, the screen will show the Calendar mode.
4.2 Calendar
Select the calendar in the main menu.
Press the ENTER button to enter the calendar. If ENTER button no press for 15seconds, it will go
to slideshow picture.
Left screen display the monthly calendar & date and right screen show the photos and time (If
there is inserted the card or USB device with pictures).
Pressing ENTER button you can change to Digital clock. On the left screen there will be displayed
clock & date time and right screen show the photos too and pressing ENTER button again change
screen to Analog Clock, just display analog clock & date
4.3 Setting
Start up setting
4.3.1 Photo setup
Press MENU button, press LEFT button or RIGHT button to select setting menu, press the ENTER
button to enter.
Press the UP button or the DOWN button to select Photo Setup, press the ENTER button to enter.
Press the LEFT button or the RIGHT button to select the option.
To adjust a setting, press the ENTER button
To exit to the menu, press the EXIT button.
Display Mode: Slideshow, Thumbnail, Browse mode
Slideshow mode
Select the Slideshow in the display mode.
Exit and return to main menu and press the ENTER to enter the PHOTO and then going to
Slideshow picture. (If no ENTER button is pressed for 15 seconds it will go automatically to
slideshow mode) (If there is inserted the card or USB device with pictures).
In slideshow model it display picture automatically. You can also press LEFT or RIGHT button to
see the previous/next picture.
Thumbnail mode
Select the Thumbnail in the display menu.
Exit and return to main menu and press the ENTER to enter the PHOTO and then going to display
the Thumbnail photos. (If there is inserted the card or USB device with pictures).
15 pieces of thumbnail photos can be display in one page and will show the picture information
at bottom line.
Browse mode
Select the Browse mode in the display menu.
Exit and return to main menu and press the ENTER to enter the PHOTO and then going to display
the picture (If there is inserted the card or USB device with pictures).
Just show the current picture, press LEFT or RIGHT button to see previous/next picture..
Display Ratio: Full Screen, Fit to Screen, Crop to Fill
Slide show time: 5Sec. 15Sec. 30.Sec. 60Sec. 5Min.15Min.
Slideshow Repeat: Repeat, Once,
Slideshow effect: Offers you following Options for the Transition between two Photos: Random,
Snake, Partition, Erase, Blinds, Random lines, Grid, Cross, Rect, Spiral, Close
4.3.2Calendar Setup
Press MENU button, press UP button or DOWN button to select setting menu, press the ENTER
button to enter.
Press the LEFT button or the RIGHT button to select Calendar Setup, press the ENTER button to
enter.
Press the LEFT button or the RIGHT button to select the option.
To adjust a setting, press the ENTER button
To exit to the menu, press the EXIT button.
Display Mode: Monthly Calendar, Digital Clock, Analog clock.
Set Date: press the LEFT or RIGHT button to change the time, date and year, and press UP or
DOWN button to next.
Clock Mode: 24hr, 12hr
Set time: press the LEFT or RIGHT button to change it and Press UP or DOWN button to next.
4.3.3 System Setup
Press MENU button, press UP button or DOWN button to select setting menu, press the ENTER
button to enter.
Press the LEFT button or the RIGHT button to select System Setup, press the PLAY button to enter.
Press the LEFT button or the RIGHT button to select the option.
To adjust a setting, press the ENTER button
To exit to the menu, press the EXIT button.
Language: EN/CZ/SL/HU/PL
Backlight: Settings from 1-5
Brightness: Settings from 0-5
Contrast: Settings from 0-5
Saturation: Settings from 0-5
Power on: setting automatically turn on: ON/OFF
Auto boot time: setting auto turn on time
Power off: setting automatically turn off: ON/OFF
Auto Shut Time: setting auto turn off time
Auto-Power Frequency: Setting from Mon to Fri. Weekend, Once, Everyday
Default: Back to Factory settings
Version: software version
System upgrade: software update
5. Technical Data
Parameter
Voltage
Input voltage
USB connection
Flash memory connection
Supported media formats
Screen size
Aspect ratio
Resolution
Brightness
Contrast
Value
5v-1A
100-240v/50-60hz
USB 2.0 compatible
SD/MMC
JPEG
7”
4:3
800*600 pixels
250 dc/m2
600 : 1
EN
Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates
that this product shall not be treated as household waste. Please, dispose of this
equipment at your applicable collection point for the recycling of electrical &
electronic equipments waste. In the European Union and Other European
countries which there are separate collection systems for used electrical and
electronic product. By ensuring the correct disposal of this product, you will help prevent
potentially hazardous to the environment and to human health, which could otherwise be caused
by unsuitable waste handling of this product. The recycling of materials will help conserve
natural resources. Please do not therefore dispose of your old electrical and electronic
equipment with your household waste. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or the shop
where you purchased the product.
The CE mark confirmed that this product meets the main requirements of the Directive
2004/108/EC and 2006/95/EC of the European Parliament and the Council of Europe concerning
telecommunications and terminals regarding the Safety and health of users and of
electro-magnetic interference compliance. The CE has been demonstrated. These statements are
deposited by the manufacturer.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement