Acumen Air Viewer on iPhone and iPad Subject: User manual for

Acumen Air Viewer on iPhone and iPad Subject: User manual for
Acumen Air Viewer on iPhone and iPad
Subject: User manual for camera live monitoring and alarm video notification using
iPhone and iPad
Devices supported:
Full range of Acumen PTZs, video servers, and IP
cameras Full range of Acumen NVRs, DVRs, and video
decoder
Go to AppStore and search Acumen Air Viewer or Acumen to
get the App. Acumen AIr Viewer version: 1.0.10 or later
Digital Zoom
Rotate your phone to landscape mode. Tap on one of the channels for full screen. Once the
video is in full screen mode, use fingers for Pinch to Zoom on the screen.
Swipe screen going to the Next or Previous Window
In portrait mode, swipe on the screen left or right can move to
the next or previous window.
Tool Buttons in Portrait Mode
In portrait mode, the tool buttons are described below:
1. PTZ or ePTZ switch button
2. P1: Recall preset #1 of a PTZ camera
3. P2: Recall preset #2 of a PTZ camera
4. P3: Recall preset #3 of a PTZ camera
5. P4: Recall preset #4 of a PTZ camera
6. Auto: Start/stop auto pan
7. Snapshot: a live picture is stored in the picture folder of the iPhone or iPad.
System Buttons
There are five system function options: Live, Grouping, Camera,
System, and Alarm. The features are described below:
Add Cameras
In live mode, tap on one of the multi-view window for full screen view.
Click on Camera system button that will enter camera setting.
Camera setting windows is described as follows:
1.
2.
3.
4.
5.
6.
7.
8.
Camera Name—Name of the camera
URL—IP address or URL of the camera
Port—Port number of the camera
DVR/NVR—DVR/NVR
Username—The username of the camera
Password—The password of the camera
Import—Auto import switch for DVR/NVR
Import Cam Count—Import number of cameras
Note: The default username and password are:
IP cameras: admin:pass
DVRs/NVRs: admin:1111
Groupings
Click on Edit button and move the Group button that
allows moving the sequence of a group.
Click on Edit button and tap the Edit Group button that
allows editing the group Name and Window Division.
To edit cameras of a group, tap on one of the groupings. It shows all the cameras of a grouping.
Tap the camera again. It can show the camera setting window.
Start to edit
camera
Tap the
grouping
Tap the
camera
Remote Playback for NVRs/DVRs/IP Cameras
For playing recordings from an NVR, DVR, or IP camera, tap on one live channel for full screen
view.
1:
2:
3:
4:
In full screen mode, click on Playback button.
Click on date and time for entering time.
Enter OK button for entering date and time.
Click on Play button to play the video.
Alarm Video Notification
If motion, tampering, digital input alarm, and/or IVS alarm is activated, Acumen Air Viewer is
able to receive the alarm from a camera. Click on the Play button that can see the
video after downloading. The video is then stored in the iPhone. You can delete the file by
click on the Delete button.
Requirements
1. Make sure that the SD card is plugged in for IP cameras’ alarm video notification feature.
2. Only admin user can receive the alarm video notification.
Three Steps to view Alarm Video Notification
Step #1:
Step #2:
Receive Alarm
Select the event
Step #3:
Play the video
Firmware Requirement
AirForce series: 1.0.58 or above
AirPlay series: 1.1.14 or above
NVR Touch series: 1.0.42
DVR 8 series: 0.0.48
iOS Requirement
Version: 5.1 or later
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement