UFED 4PC User Manual January 2015 ENGLISH

UFED 4PC User Manual January 2015 ENGLISH
UFED 4PC
User Manual
January 2015
Legal Notices
Copyright © 2015 Cellebrite Mobile Synchronization Ltd. All rights reserved.
This manual is delivered subject to the following conditions and restrictions:
This manual contains proprietary information belonging to Cellebrite Ltd. Such information is supplied solely
for the purpose of assisting explicitly and properly authorized users of the UFED 4PC.
 No part of this content may be used for any other purpose, disclosed to any person or firm, or reproduced
by any means, electronic or mechanical, without the express prior written permission of Cellebrite Ltd.
 The text and graphics are for the purpose of illustration and reference only. The specifications on which
they are based are subject to change without notice.
 Information in this document is subject to change without notice. Corporate and individual names and
data used in examples herein are Fictitious unless otherwise noted.
WARNING: UFED 4PC should be used only with the dedicated AC/DC adapter supplied with this
device.
WARNING: USB, Ethernet and target and source connectors should be connected only to CE
approved devices (according to IEC/EN 60065 standard).
WARNING: Make sure that all external connections to other devices (except for the power
adapter) are only indoor and SELV (safety extra low voltage, not exceed 42.4 V peak or 60 VDC).
FCC Warning: This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference
2) This device must accept any interference received, including interference that may cause
undesired operation
Contents
Chapter 1: Introduction ......................................... 9
1.1. Overview.................................................................................... 9
1.2. System requirements.......................................................11
1.3. UFED 4PC extraction types and device tools ....12
1.4. UFED 4PC accessories......................................................16
1.4.1. UFED Device Adapter ..............................................17
1.4.2. Using cables and tips...............................................18
1.5. Supported devices ............................................................21
1.6. Cellebrite YouTube channel ........................................21
Chapter 2: Getting started ................................. 23
2.1. Installing UFED 4PC...........................................................23
2.2. Activating the license ......................................................29
2.2.1. Using a dongle ............................................................29
2.2.2. Using a software license ........................................31
2.2.3. Using a network dongle ....................................... 34
2.2.4. Using an online license ......................................... 37
2.3. Working with UFED 4PC................................................ 40
2.3.1. Opening UFED 4PC .................................................. 40
2.3.2. Home screen................................................................ 40
2.3.3. Detect automatically............................................... 43
2.3.4. Search function .......................................................... 46
2.3.5. Manual selection ....................................................... 48
2.3.6. Application taskbar .................................................. 51
Chapter 3: Logical extraction ........................... 53
3.1. Performing logical extraction .................................... 54
3.1.1. Connect mobile device ......................................... 55
3.1.2. Select phone memory ........................................... 56
3.1.3. Select content types ............................................... 57
3.1.4. Extraction in progress............................................. 61
3.1.5. The extracted data folder ..................................... 67
Chapter 4: Password extraction ...................... 69
4.1. Performing password extraction ............................. 69
6
4.2. The extracted passwords folder ................................75
Chapter 8: SIM card functionality ................. 126
4.3. Disabling the password..................................................76
8.1. SIM data extraction ........................................................126
8.1.1. Performing SIM data extraction .....................126
8.1.2. The extracted SIM data folder .........................137
Chapter 5: File system extraction ................... 81
5.1. Performing a file system extraction ........................81
5.2. The file system extraction folder...............................88
5.3. Android backup ..................................................................90
Chapter 6: Physical extraction ......................... 97
8.2. Clone SIM .............................................................................137
8.2.1. Cloning an existing SIM card ID .....................138
8.2.2. Entering SIM data manually..............................145
8.2.3. Creating a GSM test SIM......................................154
6.1. Performing a physical extraction ..............................97
Chapter 9: Device tools ..................................... 159
6.2. The physical extraction folder ................................. 107
9.1. Bluetooth Scan..................................................................161
Chapter 7: Capture images and
screenshots ............................................................. 109
9.2. Switch to CDMA offline mode ................................164
9.3. Test peek/poke functionality ...................................166
7.1. The UFED camera............................................................ 109
7.1.1. Contents ....................................................................... 110
9.4. Activate TomTom trip log ..........................................168
7.2. Capturing images ........................................................... 110
9.6. Uninstall Android client ...............................................169
7.3. Capturing screenshots ................................................. 121
9.7. Exit Odin mode .................................................................169
9.5. Uninstall windows mobile client ...........................168
Chapter 10: Settings ........................................... 171
Contents
10.1. General settings ............................................................ 172
10.1.1. Managing the custom list ............................... 173
10.1.2. Changing the application interface
language ................................................................................... 177
10.1.3. Mobile extraction client ................................... 181
10.1.4. Changing the extraction location .............. 182
10.2. Report settings ............................................................... 183
10.2.1. Managing report fields ..................................... 186
10.3. System settings.............................................................. 189
10.4. License settings ............................................................. 191
10.5. Version details ................................................................ 193
10.5.1. Updates and versions ........................................ 194
10.6. User permissions ........................................................... 195
10.6.1. Permission management ................................ 197
7
11.3. USB Cable for UFED Device Adapter
PowerUP ........................................................................................207
Chapter 12: Regulatory compliance............ 209
Chapter 13: Extracting Android devices .... 211
13.1. Android extraction methods .................................211
13.1.1. Android debugging bridge method........212
13.1.2. Bootloader extraction ........................................215
13.2. Performing a file system extraction for an
Android device ..........................................................................216
13.2.1. Locked Motorola devices ................................216
13.2.2. Locked HTC, Huawei, and ZTE devices ...217
13.2.3. Other locked devices .........................................218
13.2.4. Unlocked devices .................................................219
13.3. Technical terms .............................................................220
Chapter 11: Special cables ............................... 205
11.1. Device power-up cable ............................................ 205
11.2. USB extension cable for UFED Device
Adapter........................................................................................... 207
Chapter 14: Appendix ........................................ 221
8
‎C hapter
1: Introduction
9
Chapter 1: Introduction
UFED 4PC is a new generation application that empowers law enforcement, military, intelligence,
corporate security, and e-discovery personnel to capture critical forensic evidence from all mobile
devices. This includes mobile phones, handheld tablets, portable GPS devices, and devices
manufactured with Chinese chipsets.
1.1. Overview
UFED 4PC enables you to:
 Perform physical, file system, and logical extraction of device data and passwords. Capabilities may
vary, based on the UFED 4PC product purchased - UFED 4PC Logical or UFED 4PC Ultimate.
 Extract vital data such as call logs, phonebook entries, text messages (SMS), pictures, videos, audio
files, ESN IMEI, ICCID and IMSI information and more, from a wide range of mobile devices.
 Extract data from the widest selection of operating systems, such as Apple iOS, Blackberry, Android,
Symbian, Microsoft Mobile, and Palm OS.
 Clone the SIM ID, which allows you to extract phone data while preventing the mobile device from
connecting to the network. It can also help if the SIM card is missing.
10
 Extract the data from a mobile device either by a cable based connection (serial or USB) or a
Bluetooth wireless connection. The tips and cable kit consists of four master cables and various
tips.
The extracted data can be saved and then generated in the form of clear and concise reports.
-expertise provides reliability and ease-of-use, and ensures the broadest support
for mobile devices, including updates for newly released models before they are available to the
market.
‎C hapter
1: Introduction
11
1.2. System requirements
PC
Windows compatible PC with a Pentium® IV or compatible processor running at
1.6 GHz or higher
Microsoft Windows XP with SP3 or later
Operating system Microsoft Windows Vista, Windows 7 or Windows 8
Microsoft Windows 7 Boot Camp on MAC
Memory (RAM)
OS
32 bit
64 bit
Recommended
4GB
8GB
Minimum
4GB
4GB
Space
requirements
500 MB of free disk space for installation
Additional
requirements
Microsoft .Net version 4.0
Processor
USB 3.0 Chipset, Renesas,® Intel®
Permissions
If you intend to activate the application using a hardware license key (dongle)
provided by Cellebrite, you must have administrative rights over the computer.
12
NOTE: This specification is for a PC running both UFED 4PC and the Physical Analyzer application as
the decoding operations of the Physical Analyzer require the higher specification. For a
standalone PC running UFED 4PC only an ATOM based chipset (or equivalent) is sufficient.
NOTE: To enable extraction to a PC with Windows Vista Operating System, follow the procedure in
enabling connectivity with Windows Vista.
1.3. UFED 4PC extraction types and device tools
UFED 4PC includes a range of data extraction types that can be accessed through the Select
Extraction Type screen.
‎C hapter
1: Introduction
13
NOTE: The available extraction functionalities may vary, based on the type of product purchased; the
UFED 4PC Logical or the UFED 4PC Ultimate product.
Table ‎1-1: Functionalities of the UFED 4PC products
Functionality
Logical Extraction
UFED 4PC Logical
Yes
UFED 4PC Ultimate
Yes
SIM Data Extraction
Yes
Yes
Password Extraction
Yes
Yes
Clone SIM
Yes
Yes
File System Extraction
Not available
Yes
Physical Extraction
Not available
Yes
Capture Images/Screenshots
Optional
Yes
The extraction types are:
 Logical extraction (page 53)
Logical Extraction enables the extraction of various data types. This includes call logs, phonebook
entries, SMS text messages, MMS, emails, calendar events, multimedia files (images, videos, and so
on), and more.
14
 SIM data extraction (page 126)
SIM Data Extraction enables the extraction of information from a SIM or USIM card.
 File system extraction (page 81)
File System Extraction enables a full system extraction of a source mobile device's memory.
 Password extraction (page 69)
Password Extraction enables the extraction and display of passwords from a source mobile device
directly in the Password Obtained screen.
 Clone SIM (page 137)
Clone SIM ID copies a SIM ID from one SIM card to a UFED SIM ID Access Card.
 Physical extraction (page 90)
Physical Extraction uses advanced methods in order to extract a physical bit-for-bit image of the
flash memory of a mobile device, including unallocated space. Unlike conventional logical
, and
extracts data from the phone's internal flash memory directly. Unallocated space may contain
deleted items such as SMS, call logs, phonebook entries, pictures, and video and audio files.
 Capture images and screenshots (page 109)
Capture images and screenshots using the UFED camera to take pictures or videos of a device.
You can also capture internal screenshots directly from the connected device.
‎C hapter
1: Introduction
All extraction types can be saved to your PC, or to a removable storage device, as desired.
The Device tools (page 159) menu tab is also located in the Select Extraction Type screen, and
includes:
 Bluetooth scan
 Switch to CDMA offline mode
 Odin mode
 Test Peek/ Poke functionality
 Activate TomTom trip log
 Uninstall Windows Mobile Client
 Uninstall Android Client
15
16
1.4. UFED 4PC accessories
The UFED 4PC kit includes connection cables and tips. These are used in order to connect mobile
devices to UFED 4PC.
Figure 1: UFED 4PC Cables and tips
The UFED 4PC Ultimate kit contains tips and cables for logical, file system, and physical extractions.
The UFED Logical kit contains tips and cables for Logical Extraction only.
‎C hapter
1: Introduction
1.4.1. UFED Device Adapter
The UFED 4PC kit contains a device adapter that attaches to your PC's USB port.
The device adapter has the following connectors for source devices:
 SIM card reader
 USB port
 RJ45 port
17
18
Each connector has a LED that indicates availability during an extraction and blinks to indicate where
to connect the source device. In addition there are LEDs for power and Bluetooth.
NOTE: Some devices can be extracted only by using the UFED Device Adapter.
1.4.2. Using cables and tips
The cables and tips set includes up to various adapter cables (the number of cables depends on the
UFED product and kit purchased). Each cable has a letter and name for example: A Adapter USB.
Figure 2: Single cable
‎C hapter
1: Introduction
For easy recognition, the tips are color coded and numbered; the color represents the vendor.
Figure 3: UFED Touch tip (example)
19
20
Before each extraction, the required cable and tip number and color is specified in the Source area of
the Select Content Types screen.
Figure 4: Enlargement of notification
‎C hapter
1: Introduction
21
1.5. Supported devices
To find out which mobile devices are supported in UFED 4PC and which data extraction capabilities
are available for every mobile device use one of the following:
1) The UFED <version no> Supported Phone List file is delivered with every UFED software version
update. The Microsoft Excel file contains two worksheets:
The UFED Logical sheet lists the mobile devices supported for logical extraction.
The UFED Physical sheet lists the mobile devices supported for physical, file system, and password
extractions.
2) UFED Phone Detective (devices supported for logical extraction only).
3) On Cellebrite's website:
http://www.cellebrite.com/mobile-forensics/support/ufed-supported-devices
1.6. Cellebrite YouTube channel
For your convenience, a selection of useful videos demonstrating typical work flows and common
procedures are available at youtube.com/cellebriteufed.
22
‎C hapter
2: Getting started
Chapter 2: Getting started
2.1. Installing UFED 4PC
1) Open the UFED 4PC installation wizard.
The UFED 4PC Installation wizard screen appears.
23
24
2) Click Next.
The License Agreement screen appears.
3) Select I accept the agreement, and click Next.
‎C hapter
2: Getting started
The Select Destination Location screen appears.
4) Select the folder where you want the application installed, and click Next to continue.
25
26
The Select Additional Tasks screen appears.
5) Select the additional tasks you want the install wizard to perform, and then click Next.
‎C hapter
2: Getting started
The Ready to Install screen appears.
27
28
6) Click Install.
7) Select Yes, restart the computer now, and click Finish to restart the computer.
You must now activate the license to use UFED 4PC. Proceed to Activating the license (page 29).
‎C hapter
2: Getting started
29
2.2. Activating the license
Activate UFED 4PC in one of the following ways:
 Using a dongle (page 29)
 Using a software license (page 31)
 Using a network dongle (page 34)
 Using an online license (page 37)
NOTE: Check your UFED 4PC kit to make sure which method you should use.
2.2.1. Using a dongle
Use the UFED dongle provided with your UFED 4PC kit. The dongle contains
licenses for all the applications purchased.
To use UFED 4PC with a dongle:
1) Connect the dongle to a USB port on your computer. The license is
automatically located. When the dongle is recognized by the operating
system, the application can read the license.
2) Start the application.
Congratulations, your UFED 4 PC application is now ready!
UFED Dongle
30
If a license dongle is not found:
1) When a license dongle is not found, the Cellebrite product license window appears.
2) Click
. If you connected the dongle to a USB port on your computer, and it still does not
work, contact support@cellebrite.com.
NOTE: The HASP dongle drivers must be installed in order to use a hardware license key. If the
drivers were not installed during the software installation process, you can run the
installation process again and select Install Hasp Dongle Drivers at the end of the process.
‎C hapter
2: Getting started
31
2.2.2. Using a software license
Use the PC activation code provided with your UFED 4PC kit to
download a software license.
To use UFED 4PC with a software license:
1) Go to https://my.cellebrite.com/ufed4pc and sign in to your
MyCellebrite account.
Activation Code
(If you do not have an account, click Register now and create a user. Then go back to
https://my.cellebrite.com/ufed4pc.)
You are directed to the UFED 4PC activation window.
2) Click Download UFED 4PC and save the file to a PC.
3) Extract the zip file, click the installation file and install the software using the Setup Wizard. Restart
the PC if required.
4) Repeat step 1 and go to the https://my.cellebrite.com/ufed4pc link.
5) In the Activation Code field, enter the Activation code provided with your UFED 4PC kit.
6) Next, obtain your Computer ID (do not close the MyCellebrite page while performing this step).
a) Start the application. The Cellebrite product licensing window appears.
32
b) Click
. The following window appears.
‎C hapter
2: Getting started
c) Click Copy to copy the Computer ID displayed in the window.
7) In MyCellebrite paste the copied Computer ID.
33
34
8) Click Generate License to download the application license key to your PC. The license key will
also be sent to your registered MyCellebrite email address.
9) In the UFED 4PC application, click Load license file in the Cellebrite product license window, then
locate and select the license file, or click Load from the web to upload the license file from
MyCellebrite.
Congratulations, your UFED 4PC application is now ready!
2.2.3. Using a network dongle
and contains licenses for all the applications purchased.
To use UFED 4PC with a network dongle:
1) Start the application. If the network dongle is connected to the
network, the application starts and you can start working
immediately.
UFED network dongles
If the network dongle is not recognized, the Cellebrite product licensing window appears.
‎C hapter
2: Getting started
2) Click
. The following window appears.
35
36
NOTE: If a dongle was not found on the network. Make sure that you have an Internet connection
and that a dongle is connected to the network. Then click Refresh to search for a network
dongle again.
NOTE: If you click Refresh twice, a new window will appear where you can manually connect to
the network dongle. Click Advanced and then enter the IP address (or host name).
NOTE: If there is only one network dongle it will be selected automatically. If there are multiple
network dongles, select the required Dongle Serial number.
Congratulations, your UFED 4PC application is now ready!
‎C hapter
2: Getting started
37
2.2.4. Using an online license
Use the PC activation code provided with your UFED 4PC kit to download an online license.
To use UFED 4PC with an online license:
1) Go to https://my.cellebrite.com/ufed4pconline and log on to your MyCellebrite account.
(If you do not have an account, click Register now and create a user. Then go back to
https://my.cellebrite.com/ufed4pconline.)
You are directed to the UFED 4PC activation window.
2) Click Download UFED 4PC and follow the installation instructions.
3) Start the application. When starting for the first time, or when a license is not found, the Cellebrite
product license window appears.
38
4) Click
. The following window appears.
‎C hapter
2: Getting started
39
5) Click Copy to copy the Computer ID displayed in the window.
6) In the https://my.cellebrite.com/ufed4pconline page, in the Activation Code field, enter the code
provided with your UFED 4PC kit.
40
7) In the Computer ID field, paste the Computer ID that you copied in step 5.
8) Click Generate License.
9) Make sure you have an Internet connection on your computer and then click Retry in the
Cellebrite product license window.
Congratulations, your UFED 4PC application is now ready!
2.3. Working with UFED 4PC
2.3.1. Opening UFED 4PC
 Double-click the UFED 4PC icon to open the application.
2.3.2. Home screen
The home screen groups the extraction data into distinct areas: mobile device, SIM card and USB
device. In addition, users can directly operate the camera for immediate image capturing or access the
device tools. All extraction functionality is driven by automatic identification of the device, by
searching for the device or by manually selecting the vendor and model. UFED determines what
functions are available for the specific device and displays the relevant functions. The home screen is
displayed next.
‎C hapter
2: Getting started
41
42
To extract data from a device:
 Select Extract from Mobile Device.
The following screen appears.
‎C hapter
2: Getting started
2.3.3. Detect automatically
To use the Autodetect function to locate the mobile device:
1) Connect the mobile device to UFED 4PC.
2) Click the device.
3) In the event that the device has not been connected, a waiting for a device to be connected
prompt appears - connect the device.
43
44
4) If the connected device cannot be recognized by the system, a message prompts you to try the
following steps or click Find device manually.
‎C hapter
2: Getting started
In the event that multiple matches are found, the Select Autodetected Model screen appears.
5) Select the relevant device.
45
46
2.3.4. Search function
To search for the mobile device:
1) Begin typing the search for device box. As you type each letter, the list of devices is reduced to
meet the criteria. In this example "sa" is the search criteria, and the devices that match the criteria
are displayed.
‎C hapter
2: Getting started
47
2) Select the device model type from the list.
Having selected the device, UFED 4PC will determine what extraction functions are available for this
combination and present those functions as follows:
48
2.3.5. Manual selection
To manually select the vendor and model:
1) Click Extract from Mobile Device and then click Manual Selection.
The Select Vendor screen appears where the vendor of the device is chosen.
‎C hapter
2: Getting started
2) After choosing the Vendor, the application presents the Select Model screen where the specific
model of the device is chosen:
49
50
Having chosen the Vendor and the Model, UFED 4PC will determine what extraction functions are
available for this combination and present those functions.
The possible extractions are:
 Logical extraction (page 53)
 Password extraction (page 69)
 File system extraction (page 81)
 Physical extraction (page 90)
 Capture images and screenshots (page 109)
There is also the option to use Device Tools or SIM Card functionality.
 Device tools (page 159)
 Clone SIM (page 137) and SIM data extraction (page 126)
‎C hapter
2: Getting started
51
2.3.6. Application taskbar
The application taskbar is located at the top of the screen.
Table ‎2-1: Application taskbar icons and descriptions
Icon
Description
Return to home screen
Display the Settings screen from where the device settings can be defined.
Video tutorials.
NOTE: When UFED 4PC is connected to the Internet, you will receive an automatic
notification to install the video tutorials. You can also install the video tutorials manually by
downloading the media package from MyCellebrite and then install it via the Version tab
(Settings > Version > File).
52
‎C hapter
3: Logical extraction
53
Chapter 3: Logical extraction
The Logical Extraction function enables you to extract various types of data, such as call logs,
phonebook records, SMS text messages, calendar events, and multimedia files (images, videos, etc.)
from a source device and saved to your PC or to a removable storage device, as desired.
In addition, data can be extracted from many Android and iOS apps. For an updated list of supported
apps and versions for each platform, refer to the Decoding Android Apps and Decoding iOS Apps
documents in MyCellebrite or from the Help > Supported Apps menu in UFED Physical/Logical
Analyzer. Data extracted from these apps can be analyzed using UFED Physical/Logical Analyzer
(although the data is not included in UFED HTML and XML reports).
NOTE: The available types of extracted data may vary depending on the source device manufacturer
and model. The supported data types are listed in the UFED Phone Detective or within the
UFED Supported Phone List Microsoft Excel file.
54
3.1. Performing logical extraction
To perform a logical extraction from a mobile device:
 Click Extract from Mobile Device and identify the device, then click Logical Extraction.
‎C hapter
3: Logical extraction
3.1.1. Connect mobile device
NOTE: The following screen appears only when more than one connection option is available.
NOTE: For Apple devices use the generic option that is available when selecting a device.
 Select the connection type from the options shown.
55
56
3.1.2. Select phone memory
Data can be extracted from the device memory, memory cards and SIM memory of the device. All
memories can be selected or only one. The types of memories can vary between devices. Where only
a single memory is available, this screen is not displayed.
‎C hapter
3: Logical extraction
To select the phone memory:
1) The Phone memory selection box is selected by default. It can be deselected if desired.
2) Select any other memories, as desired.
3) Click Next to continue.
The Select extraction location screen appears.
3.1.3. Select content types
Multiple content types are listed. The types are displayed in three different ways:
 Types selected by default shown with a check mark.
 Types available for selection shown without check marks.
 Types not available shown as dimmed.
57
58
To select content types:
1) Select the additional content types required to be included in the information extracted from this
device.
2) Select Select All to select all the available types.
‎C hapter
3: Logical extraction
NOTE: Only content types that are supported by the selected device are enabled for selection.
Unsupported content types appear dimmed.
3) Click Start to continue.
4) To change the target path:
a) Click Change target path.
b) In the Browse for Folder dialog, browse to the location where you want to save the
extraction.
c) Select the desired location, or click Make New Folder to create a target directory.
d) Click OK.
The target path is set.
The Waiting for Device screen appears.
59
60
5) Connect the source device to the USB port on the computer. If the device is already connected,
disconnect and then reconnect the device.
6) Click Continue.
‎C hapter
3: Logical extraction
3.1.4. Extraction in progress
During the extraction process, the progress bar for the Source and then the Target is active.
61
62
When extraction is complete and if required, the Source Instructions screen appears (this depends
on the device model).
‎C hapter
3: Logical extraction
1) Follow the instructions to return the mobile device settings to the correct settings.
2) Click OK.
The Phone Extraction Summary screen appears.
63
64
3) Click the required button.
To view an HTML preview report that includes information about the device and the
extraction.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
Examples of a preview report and the additional extraction type screens are show next.
‎C hapter
3: Logical extraction
65
66
‎C hapter
3: Logical extraction
67
3.1.5. The extracted data folder
At the end of the data extraction process, the extracted data is saved in the location you selected.
NOTE: The extracted data folder is named "UFED" with the selected device name, the IMEI/MEID info.
and the extraction date. For example, "UFED Samsung GSM GT-i9205 Samsung Galaxy Mega
6.3 2014_11_10 (0001)"
The extracted data folder contains:




Multimedia files folders named Audio, Images, Ringtones, and Video folders, containing
each of the respective type of media files.
Phone extraction report files in HTML and XML formats. (One HTML report per content
type)
UFED Manager files of the extracted calls log (*.clog), phonebook (*.pbb), SMS messages
(*.sms), and calendar (*.cal) Email (*.Email), MMS (*.MMS) and IM (*.IM) data.
UFD file.
NOTE: UFED Manager files are generated only for data types that contain items.
The XML file can be viewed by both the UFED Logical Analyzer and the UFED Physical Analyzer.
68
‎C hapter
4: Password extraction
Chapter 4: Password extraction
The Extract Password function can extract the password from a device.
4.1. Performing password extraction
To extract passwords from a mobile device:
1) Click Extract from Mobile Device and identify the device, then click Password Extraction.
69
70
2) The Select Extraction Location screen appears.
3) Select Display Only or Local Drive.
‎C hapter
4: Password extraction
The Waiting for Device screens appears.
4) Connect the source device, either directly to the PC, or via the UFED Device Adapter.
71
72
5) Click Continue.
The Extraction in Progress screen appears.
‎C hapter
4: Password extraction
At the end of the extraction process, the extracted passwords are displayed in the Passwords
screen.
6) Click Continue to display a summary of the passwords extraction process.
7) Click Continue.
The following screen appears.
73
74
8) Click the required button.
To add additional extraction types for the same device.
To end the process and return to the home screen.
‎C hapter
4: Password extraction
75
4.2. The extracted passwords folder
At the end of the passwords extraction process, the extracted passwords are saved to a text file
named Passwords.txt at the location you selected during the data extraction process.
NOTE: The text file is located inside a folder named "Password" with the name of the selected device
name and the extraction date. For example, "Passwords Iden i9 2011_06_11 (001)"
76
4.3. Disabling the password
You can disable the password for particular devices. For example:
Apple
Apple
SamsungCDMA
SamsungGSM
SamsungGSM
SamsungGSM
SamsungGSM
iPhone 2G
iPhone 3G
SPH-M820 Galaxy Prevail (Android)
SGH-T499 Dart (Android)
SGH-T589 Gravity Smart (Android)
SGH-i857 Doubletime (Android)
GT-i5500 Europa Galaxy 5 (Android)
SamsungGSM
SamsungGSM
SamsungGSM
GT-i5510 Galaxy (Android)
GT-S5570 Galaxy Mini (Android)
GT-S5660 Galaxy Gio (Android)
SamsungGSM
SamsungGSM
GT-S5670L (Android)
GT-S5830 Ace (Android)
For a complete list of supported devices, refer to
http://www.cellebrite.com/mobile-forensics/support/ufed-supported-devices
‎C hapter
4: Password extraction
When you disable the password, UFED 4PC disables the code that enables the password.
Each device model has a slightly different process, depending on the phone lock combination and
how the model connects to UFED 4PC.
1) Click Extract from Mobile Device and identify the device, then click Password Removal.
The Waiting for Device screen appears.
77
78
‎C hapter
4: Password extraction
2) Follow the instructions for the device and then click Continue.
NOTE: If the device does not unlock, click Abort, and repeat the procedure. Make sure you are
using the correct USB cable.
The following screen appears.
3) Click Continue and follow any on-screen instructions.
The following the screens appears.
79
80
4) Click Continue.
The following screen appears.
5) Click Finish.
‎C hapter
5: File system extraction
Chapter 5: File system extraction
The File System Extraction function enables you to perform a full system extraction from a device.
5.1. Performing a file system extraction
1) Click Extract from Mobile Device and identify the device, then click File System Extraction.
81
82
2) The Select Mode screen appears.
3) Select ADB (for Android Backup, see Android backup (page 90.)
The Select Extraction Location screen appears.
‎C hapter
5: File system extraction
83
84
4) To change the target path:
a) Click Change target path.
b) In the Browse For Folder dialog, browse to the location where you want to save the
extraction.
c) Select the desired location, or click Make New Folder to create a target directory.
d) Click OK.
The target path is set.
5) Click Next.
‎C hapter
5: File system extraction
The Waiting for Device screen appears.
6) Select the correct cable and tip for the mobile device based on the information written in the
screen.
7) Change the device settings according to the instructions
8) Connect the device.
9) Click Continue.
85
86
The Extraction in Progress screen appears.
During the extraction process, the progress bar for the Source and then the Target is active.
‎C hapter
5: File system extraction
NOTE: For QCP and Samsung MTK devices, an estimation of the time the extraction will take is
displayed.
When extraction is complete the File System Extraction Summary screen appears.
87
88
10) Click the required button.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
5.2. The file system extraction folder
At the end of the file system extraction process, the extracted data is saved in the location you
selected previously (see Performing a File System Extraction)
‎C hapter
5: File system extraction
89
NOTE: The extracted data folder is named "FileSystemDump" with the selected device model and
name and the extraction operation date. For example, "FileSystemDump Nokia GSM Nokia
2626 2014_03_12 (001)"
The extracted data folder contains:



Zipped archive of the device file system containing files and folders in the same structure
they were extracted.
UFD file containing the system extraction information, used by the UFED Physical
Analyzer application.
PM file.
The File System extraction can be viewed using the UFED Physical Analyzer.
90
5.3. Android backup
The Android Backup feature communicates with a connected Android device and enables you to
characteristics. Android backup supports Android devices with version 4.1 and later.
Android Backup may provide less data then other methods, therefore, you should use this feature
when other file system methods such as ADB are not successful, or when other file system methods
are not available for the device (for example, if the android version is not supported).
There are two extraction methods:
 No Shared: Extracts all the applications (native and non-native) that reside on the device.
 With Shared: Extracts all the applications (native and non-native) that reside on the device plus
method takes additional time for the extraction. If this method is not successful you should try the
No Shared method.
To extract data using Android backup:
1) Click Extract from Mobile Device and identify the device, then click File System Extraction.
‎C hapter
5: File system extraction
The following screen appears.
2) Click Android Backup.
A message appears to indicate that Android backup mode extracts the data according to the
3) Click Continue.
91
92
4) Select the target path and click Next.
The waiting for Device screen appears.
The Extraction in Progress screen appears.
‎C hapter
5: File system extraction
5) Click Continue, and then select Backup my data on the device.
The following screen appears.
The following screen appears.
93
94
6) Click No if you do not want to try extract data from a shared location. Click Yes if you want to try
extract information from a shared location.
The following screen appears.
‎C hapter
5: File system extraction
7) Follow the instructions and click OK.
When the extraction is complete the File System Extraction Summary screen appears.
95
96
8) Click the required button.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
‎C hapter
6: Physical extraction
Chapter 6: Physical extraction
The Physical Extraction function enables you to perform a physical bit-for-bit image of the source
device memory to a removable storage device or PC.
6.1. Performing a physical extraction
1) Click Extract from Mobile Device and identify the device, then click Physical Extraction.
The Select Mode screen appears.
97
98
2) Click ADB or Boot Loader (recommended)..
The Select Extraction Location screen appears.
‎C hapter
6: Physical extraction
99
100
3) To change the target path:
a) Click Change target path.
b) In the Browse For Folder dialog, browse to the location where you want to save the
extraction.
c) Select the desired location, or click Make New Folder to create a target directory.
d) Click OK.
The target path is set.
‎C hapter
6: Physical extraction
4) Click Next.
Depending on whether or not the device requires the UFED Device Adapter, the Waiting for
Device or Waiting for Device Adapter screen appears.
101
102
5) Do one of the following:
If you can connect the device directly to the PC:



Select the correct cable and tip for the mobile device based on the instruction on the
screen.
Change the device settings according to the instructions.
Connect the device to the PC.
If the device requires the UFED Device Adapter to perform the extraction:
 Connect the UFED Device Adapter to the PC USB port.
The source port on the UFED Device Adapter flashes.
 Connect the device to the UFED Device Adapter.
6) Click Continue.
‎C hapter
6: Physical extraction
The Extraction in Progress screen appears.
During the extraction process, the progress bar for the Source and then the Target is active.
7) Follow any on-screen instructions. The following screen appears.
103
104
NOTE: For some devices, an estimation of the time the extraction will take is displayed: For
example, Blackberry, Nokia BB5, QCP (SamM550, LgEmergency, LgP0), Android, (generic
and SPF), SpreadTrum, Samsung GSM (MTK, LGInfinion, and BCM2133), and Palm.
8) Click OK. When extraction is complete the Physical Extraction Summary screen appears.
‎C hapter
6: Physical extraction
9) Click the required button.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
105
106
In the event that the system cannot connect to the device the Extraction Summary screen appears
with an error message.
10) Follow the instructions on the screen and click Retry.
‎C hapter
6: Physical extraction
107
6.2. The physical extraction folder
At the end of the physical extraction process, the extracted data is saved in the location you selected
during the physical extraction process. See step 5 of Performing a Physical Extraction.
NOTE: The extracted data folder is named "Physical" with the selected device name and the extraction
operation date. For example, "Physical Samsung GSM SGH-A711 2011_06_12 (001)"
The extracted data folder contains:



Binary file of the device memory.
UFD file containing the system extraction information, used by the UFED Physical
Analyzer application.
The extraction information can be viewed using the UFED Physical Analyzer. You can
double click on the UDF file or open it via the GUI.
108
‎C hapter
7: Capture images and screenshots
109
Chapter 7: Capture images and screenshots
The UFED camera enables you to collect evidence by taking pictures or videos of a device (see
Capturing images on page 110). You can also use a Screenshot feature to capture internal
screenshots directly from a Blackberry, Android or iOS device (see Capturing screenshots on page
121). Both these options can be useful as complimentary evidence or in instances when data cannot
be extracted from a device. You can add notes, categories and bookmarks to the images and videos,
which will be visible in the UFED Physical/Logical Analyzer.
The collected evidence can be shown within a standalone custom report or in addition to the
extracted information. The report includes information about the device, connection type, UFED
version, and serial number. Image information includes file name link, file size, date and time, MD5 and
SHA256 hash information. The images are located in a folder called Snapshots and are in PNG format.
Video information includes file name, file size, date and time, and a link to the file. The videos are
located in a folder called Videos and are in AVI format.
7.1. The UFED camera
The UFED camera is offered as an add-on and it is controlled by the UFED 4PC. All necessary drivers
are preinstalled with the application. The UFED camera includes a camera stand, which enables you to
adjust the height and the angle of the UFED camera, a pad to place the device, and an anti-glare pad
to prevent glare when taking pictures. Connect the camera to an available USB port of the computer.
110
7.1.1. Contents
Part
Anti-glare pad
Quantity
1
camera
1
Camera case
1
Camera pad
1
Camera stand
1
7.2. Capturing images
When taking pictures or videos of a device, you have two options. Capture images as an additional
extraction type for a selected device, or without specifying a device.
To capture images or videos for a specific device:
1) Click Extract from Mobile Device and identify the device, then click Capture Images.
The Select Extraction Location screen appears.
‎C hapter
7: Capture images and screenshots
111
2) If required, click Change target path to select an alternate save location. A folder for this extraction
will be created in this location and will include the images (snapshots), videos, UFD file, index file,
and report file.
3) Click Next.
112
The following screen appears if no camera is detected.
4) Connect the UFED camera to a USB port on the computer.
The Capture Images screen appears.
‎C hapter
7: Capture images and screenshots
113
114
5) Do one of the following:

Click
to start a video recording and click

Click
to take a picture.

Click
to change the default category. Images and videos will be displayed
in UFED Physical/Logical under these categories.
Click an image or video, to add notes, bookmarks ( ), categories ( ), or delete the file ( ).

Click
to stop the video recording.
to move back to live view.
NOTE: To rotate a picture or video, or play a recorded video, click the picture or video, and then
click the picture or video in the leftmost screen. Use the rotate buttons
buttons
. See the following examples.
or video
‎C hapter
7: Capture images and screenshots
6) Click OK and then click Next to continue.
The Capture Images Summary screen appears.
115
116
‎C hapter
7: Capture images and screenshots
117
7) Click the required button.
To view an HTML preview report that includes information about the device and the
extraction.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
118
To capture images without a device:
1) Click Capture Images.
The Select Extraction Location screen appears.
‎C hapter
7: Capture images and screenshots
2) If required, click Change target path to select an alternate save location.
3) Click Next.
The Capture Images screen appears.
119
120
See page 114 for information on available options in this screen.
4) Click Next to continue.
The Capture Images Summary appears.
‎C hapter
7: Capture images and screenshots
121
5) Click the required button.
To view an HTML preview report that includes information about the device and the
extraction.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
7.3. Capturing screenshots
The Screenshot feature captures internal screenshots directly from a Blackberry, Android or iOS device.
To capture screenshots from the devices:
1) Click Extract from Mobile Device and identify the device, then click Capture Screenshots.
The Select Extraction Location screen appears.
122
2) If required, click Change target path to select an alternate save location.
3) Click Next.
The Waiting for Device screen appears.
‎C hapter
7: Capture images and screenshots
4) Follow the instructions to connect the device.
5) Click Continue.
The Capture Screenshots screen appears.
123
124
See page 114 for the screenshot options available this screen.
6) Click Next.
The Capture Screenshots Summary screen appears.
‎C hapter
7: Capture images and screenshots
125
7) Click the required button.
To view an HTML preview report that includes information about the device and the
extraction.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
126
Chapter 8: SIM card functionality
The SIM Card functions enable you to perform various SIM card related functions:
- Sim Data Extraction
- Clone SIM
- File System Extraction
8.1. SIM data extraction
The SIM Data Extraction function enables you to perform logical extraction from a SIM or USIM card to
a removable storage device or PC.
8.1.1. Performing SIM data extraction
The following example is performed using a SIM Card.
To perform the SIM Data Extraction:
1) Select Extract from SIM Card.
The following screen appears.
‎C hapter
8: SIM card functionality
2) Click either SIM or Iden SIM.
127
128
3) The Select Extraction Type screen appears.
‎C hapter
8: SIM card functionality
4) Select an option. The Select Content Types screen appears.
129
130
5) In the Select Content Types screen, select the content types that you want to extract from the list
of options on the center of the screen.
To select all the available data types, click Select All under the data types list (Select All appears
after you click one or more of the options on the screen).
6) Click Next.
‎C hapter
8: SIM card functionality
The Waiting for Device Adapter screen appears.
7) Connect the UFED Device Adapter.
131
132
On the UFED Device Adapter, the SIM port flashes red. The Waiting for Device screen appears.
8) Insert SIM card into the SIM card reader slot.
NOTE: The SIM port continues to flash even after the SIM card has been inserted into the SIM
reader slot.
9) Click Continue.
‎C hapter
8: SIM card functionality
The Extraction in Progress screen appears.
10) If prompted, select which of the SIM card partitions to read.
133
134
When the extraction process is complete, the SIM Extraction Summary screen appears, displaying a
summary of the extraction process.
‎C hapter
8: SIM card functionality
135
11) Click the required button.
To view an HTML preview report that includes information about the device and the
extraction.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
136
In the event that the Phone Extraction option was selected, the Phone Extraction Summary screen
appears.
12) To end the process and return to the home screen, click OK.
‎C hapter
8: SIM card functionality
137
8.1.2. The extracted SIM data folder
At the end of the SIM data extraction process, the extracted SIM data is saved in the location you
selected previously.
NOTE: The extracted SIM data folder is named "UFED SIM card" with the extraction date and counter:
"UFED SIM card SIM card <DATE> (001)"
If you selected to extract to the local drive, the extracted SIM data folder is located inside the
The extracted SIM data folder contains a detailed report of extracted data in both HTML and XML
formats and call log file (*.clog).
8.2. Clone SIM
The Clone SIM ID function enables you to copy the SIM ID from one SIM card to a UFED SIM ID Access
Card.
Cloning the SIM ID provides a suitable solution to several problems facing forensic examiners, by
allowing extraction of the device data:

While preventing the cellular device from connecting to the network, rendering the
device invisible to the network without the ability to send or receive calls or SMS
messages, and thereby preserving the device's current information. (No Faraday Bag is
required to block RF signals).
138


When the original SIM is not available, by manually programming the ICCID or IMSI into
the Cloned SIM ID Card to mimic the original missing card.
When the SIM card is PIN locked, by cloning the identification of the original SIM, which
allows extraction of the device data without losing critical data including call history and
SMS messages.
There are three different ways that a SIM card can be cloned:



Clone an existing SIM card - to create a cloned SIM to use to extract device data without a
network connection. See Cloning an existing SIM card ID.
Manually enter SIM data - to manually program the ICCID and IMSI to the cloned SIM
card. See Entering SIM data manually.
Create GSM Test SIM - The GSM test SIM card is used to extract device data when the
original SIM is not available a default ICCID and IMSI are programmed into the Cloned
SIM ID Card to mimic the original missing card. See Creating GSM test SIM.
8.2.1. Cloning an existing SIM card ID
1) Click Clone SIM.
‎C hapter
8: SIM card functionality
If the UFED Device Adapter is not connected, The Waiting for Device Adapter screen appears.
139
140
2) Connect the UFED Device Adapter to the PC USB port.
The source port on the UFED Device Adapter flashes.
3) Insert the SIM card into the UFED Device Adapter.
NOTE: The SIM port on the Cellebrite Phone Adapter flashes even after you insert the SIM card
into the SIM reader slot.
4) Click Continue.
The Select Source screen appears.
‎C hapter
8: SIM card functionality
5) Click Clone an existing SIM card
The Clone SIM ID prompt appears.
6) Check that the right SIM was inserted into the SIM card reader slot.
7) Click Continue.
141
142
If the SIM card is partitioned, a prompt appears.
8) Select which of the SIM card partitions to read.
The Extraction in Progress Source screen appears.
‎C hapter
8: SIM card functionality
When the information has been extracted from the SIM the Insert Target Card prompt appears.
9) Remove the original SIM card from the UFED Device Adapter SIM card reader.
10) Insert a UFED SIM ID Access Card into the UFED Device Adapter SIM card reader.
11) Click Continue.
143
144
At the end of the data process, a summary of the SIM cloning process is displayed, detailing the
ICCID and IMSI information of the cloned SIM card.
12) To end the process and return to the home screen, click OK.
‎C hapter
8: SIM card functionality
8.2.2. Entering SIM data manually
1) Click Clone SIM.
The Waiting for Device screen appears.
2) Connect the UFED Device Adapter to the PC USB port
3) Insert the UFED SIM ID Access card into the UFED Device Adapter.
4) Click Continue.
The Select Source screen appears.
145
146
‎C hapter
8: SIM card functionality
5) In the Select Source screen, click Manually enter SIM data.
6) Enter the SIM ICCID number (up to 20 digits).
7) Click OK.
147
148
The following screen appears:
8) Enter the SIM IMSI number (up to 15 digits), then click OK.
‎C hapter
8: SIM card functionality
The Select Language screen appears.
9)
If required, select either a language or click None.
149
150
The Enter advanced settings screen appears.
10) Click Yes or No to continue.
‎C hapter
8: SIM card functionality

151
Click Yes to display the advanced settings. The Extraction in Progress > Enter SPN screen
appears. Proceed to step 11.
 Click No to continue. Proceed to step 15.
11) Enter the SIM SPN number (up to 16 digits), then click OK.
152
The following screen appears:
12) Enter the SIM GID 1 number (up to 8 characters).
13) Click OK.
The Extraction in Progress > Enter GID 2 screen appears.
14) Enter the SIM GID 2 number (up to 8 characters).
15) Click OK.
The Insert Target Card prompt appears.
‎C hapter
8: SIM card functionality
153
16) Insert the UFED SIM ID access card into the UFED Device Adapter SIM card reader.
17) Click Continue.
NOTE: The Extraction in Progress screen is displayed throughout the data writing process.
At the end of the data writing process, a summary of the SIM cloning process is displayed, detailing
the ICCID and IMSI information programmed to the SIM card.
18) To end the process and return to home screen click OK.
154
8.2.3. Creating a GSM test SIM
1) Click Clone SIM.
The Waiting for Device screen appears.
‎C hapter
8: SIM card functionality
155
The SIM port on the Device Adapter continues to flash even after you insert the SIM card into the
SIM reader slot.
2) Insert the SIM card into the SIM card reader slot located in the left of the front panel.
3) Click Continue. The Select Source screen appears.
4) Click Create GSM Test SIM
. The following screen appears.
156
5) Make sure that the target SIM card is inserted correctly into the SIM card reader slot, then click
Continue.
The Extraction in Progress screen is displayed throughout the data reading process.
‎C hapter
8: SIM card functionality
157
At the end of the data writing process, a summary of the SIM cloning process is displayed, detailing
the ICCID and IMSI information programmed to the SIM card.
6) To end the process and return to the home screen, click OK.
158
‎C hapter
9: Device tools
Chapter 9: Device tools
The Device Tools are located on the home screen and include the following:
 Bluetooth Scan (page 161)
 Switch to CDMA Offline Mode (page 164)
 Test Peek/Poke functionality (page 166)
 Activate TomTom Trip log (page 168)
 Uninstall Windows Mobile Client (page 168)
 Uninstall Android Client (page 169)
 Exit Odin Mode (page 169)
159
160
‎C hapter
9: Device tools
161
9.1. Bluetooth Scan
NOTE: This feature is available for Bluetooth-enabled PCs only.
This tool scans for available Bluetooth devices in your proximity and enables you to pair with them.
Make sure that the Bluetooth feature of the device is enabled.
Make sure that the Bluetooth switch is on.
To perform a Bluetooth scan:
1) Click Device Tools and then click Bluetooth scan
The Connecting Bluetooth prompt appears.
.
162
2) Click Continue.
3) A list of Bluetooth devices in the vicinity appears. Select one or the following options:


Click one of the devices Device summary screen appears
Click Continue Device summary screen appears
‎C hapter
9: Device tools

Click Refresh list - Device tool in progress screen appears and UFED 4PC tries to find
additional devices.
163
164
9.2. Switch to CDMA offline mode
This tool enables you to switch radio on CDMA devices to offline mode.
To switch to CDMA offline mode:
1) Click Device Tools and then click Switch to CDMA offline mode.
The Select Link prompt appears.
2) Select the link type (USB Cable or Serial Cable).
‎C hapter
9: Device tools
The Device Tool in Progress screen appears.
The Device Tool Summary appears.
165
166
9.3. Test peek/poke functionality
This tool enables you to perform a Peek/Poke test in order to check if the device is supported by the
UFED 4PC.
To Test Peek/Poke functionality:
1) Click Device Tools and then click Test Peek/Poke functionality.
The Select Link prompt appears.
2) Select the link type (USB Cable or Serial Cable).
‎C hapter
9: Device tools
The Device Tool in Progress screen appears.
The Peek check reply prompt appears.
3) Click Continue.
The Device Tool in Progress screen appears.
The Reporting prompt appears.
167
168
9.4. Activate TomTom trip log
This tool enables you to activate or deactivate the trip log sharing feature of a connected TomTom
device, which is often disabled by the user
To Activate TomTom trip log:
1) Click Device Tools and then click Activate TomTom trip log.
The Select Mode prompt appears.
2) Select the desired mode.
A prompt labeled Attention appears requesting to connect the device to the PC.
3) Connect the device to the PC.
4) Click Continue.
9.5. Uninstall windows mobile client
In order to perform Logical Extraction, the client is installed on the device. In some cases, due to
device failure, or if the mobile device was improperly disconnected from the UFED 4PC, the client
remains installed on the mobile device.
This option enables the client to be manually uninstalled.
‎C hapter
9: Device tools
169
9.6. Uninstall Android client
In order to perform Logical Extraction, the client is installed on the device. In some cases, due to
device failure, or if the mobile device was improperly disconnected from the UFED 4PC, the client
remains installed on the mobile device.
This option enables the client to be manually uninstalled.
9.7. Exit Odin mode
In order to perform Logical Extraction, the device is placed in Odin mode. In some cases, due to device
failure, or if the mobile device was improperly disconnected from the UFED 4PC, the mobile device
remains in Odin mode.
This option enables the device to be taken out of Odin mode.
170
‎C hapter
10: Settings
171
Chapter 10: Settings
The settings screen provides access to a set of functional and behavioral setup options used to control
the functionality and usability of UFED 4PC.
To access the settings screen, click
in the application taskbar.
The settings are grouped in the settings screen in the following tabs:
 General (page 172)
 Report settings (page 183)
 System settings (page 189)
 License settings (page 191)
 Version details (page 193)
 User permissions (page 195)
The settings screen opens on the General tab.
172
10.1. General settings
The settings screen opens on the General tab.
‎C hapter
10: Settings
173
The General tab provides access to the following functions and settings:
 Managing the Custom List (page 173)
 Changing the application interface language (page 177)
 Mobile Extraction Client (page 181)
 Changing the extraction location (page 182)
To swap the first and last name in the phone book:
 Select Swap first and last name in phonebook.
10.1.1. Managing the custom list
The Custom List is the list of devices available for use during the Logical Extraction process.
Device models can be added to or deleted from the list. Multiple device models can be defined.
After a Custom List has been defined, a Custom List button is added to the Logical Extraction screen.
174
To add devices to the Custom List:
 Click Edit Custom List.
The Custom List opens. In the event that devices have been previously defined in the custom list,
the vendor names are selected.
In this example the Apple device was previously defined for the custom list and is indicated with a
blue .
‎C hapter
10: Settings
NOTE: Use
175
and
to scroll through the lists of manufacturers and devices.
1) In the Custom List, select the required device vendor. For example, Alcatel.
The list of device models appears.
2) Select one or more device models that you would like to associate with this Device Manufacturer.
176
A blue
appears in each selected device model box.
3) Click Back.
The selected manufacturer is marked with a blue
.
4) Repeat steps 2-4 for each device manufacturer and model/s to be added to the Custom List.
5) Click Finish.
‎C hapter
10: Settings
177
To remove a device from the Custom List:
1) Click Edit Custom List.
2) In the displayed Custom List dialog, select a device manufacturer marked with a blue
would like to remove (all the associated models or only one).
3) Select one or more device models marked with a blue
Custom List.
The
that you
that you would like to remove from the
mark is removed.
4) Click Back.
5) Repeat steps 2-4 for each device that needs to be removes from the Custom List.
NOTE: Removing all the marked devices of a manufacturer also removes its blue
6) Click Finish.
10.1.2. Changing the application interface language
1) Click the language field.
mark.
178
The Select Language screen appears with the current language selected. (In this case, English).
NOTE: Use the arrows to scroll through the list of available interface languages.
‎C hapter
10: Settings
2) Click the required language.
179
180
The following message appears:
3) Click OK.
The General tab appears with the language of choice in the Interface language field.
4) Click Save to close the Settings panel.
5) To restart the application:
a) Close the application.
b) To re-launch the application, do one of the following:



Click the application shortcut icon located in the UFED shortcuts panel at the right of the
screen.
Double-click the UFED 4PC icon located on the Desktop.
Click Start > UFED 4PC
UFED 4PC starts in the selected language.
‎C hapter
10: Settings
181
10.1.3. Mobile extraction client
To operate in covert mode:
 In the Settings > General tab, select the following:


Operate in covert mode - Renames the application client name from "Cellebrite.sis/exe"
to "AAA.sis/exe".
Uninstall reminder - When enabled, the UFED 4PC prompts you to uninstall the client
from the examined smartphone.
182
10.1.4. Changing the extraction location
1) In the Save extractions to area, click Browse.
The Browse For Folder dialog appears.
2) Select the folder where you want to save the extraction files, and click OK.
‎C hapter
10: Settings
10.2. Report settings
183
184
To set the report settings:
1) Access the Settings > Reports tab.
2) To set the generated reports language, click
next to Generate Reports Language, and select
the desired language.
3) To set how the known issues notes about the extracted device are logged in the generated report,
click
next to Note display modes, and select one of the following:



Disable Do not include device specific notes in the report.
Separated Notes Add all the device specific notes at the end of the report.
Embedded Notes Device-specific notes follow the content type they refer to in the report.
4) To set the generated reports visual formats, click
following:


next to Report format, and select one of the
Normal The standard report structure, suitable to standard display screens.
Compact A compact report structure, suitable for devices with a small display area.
5) To set the generated reports folder name formats, select
select one of the following:


next to Report folder format, and
Model Serial YYYY_MM_DD The folder name is constructed from <the model name> <the
model serial> <the year in 4 digits>_<the month in 2 digits>_<the day in 2 digits>
YYYYMMDD Model Serial The folder name is constructed from <the year in 4 digits><the
month in 2 digits><the day in 2 digits> <the model name> <the model serial>
‎C hapter
10: Settings
185
6) Select or clear Show MD5 to toggle the display of the MD5 values which are generated for each
file in the extracted data.
7) Select Create MD5 list file to generate a Checksums.md5 file that contains all the generated MD5
values of the extracted data.
8) Select or clear Show SHA256 to toggle the display of the SHA 256 values which are generated for
each file in the extracted data.
9) Select or clear Partial Extraction to set, in the event of an extraction error, whether or not to
include the partially extracted data up to the error point in the generated report.
10) Click Report custom fields to add, remove and edit report fields. For more information, see
Managing report fields (page 186).
11) To set a field as required, click the field in the Required column.
12) Click Save.
186
10.2.1. Managing report fields
1) Click Report custom fields to customize the report by defining additional fields which will be filled
at the end of the extraction.
‎C hapter
10: Settings
2) To add a new field:
a) Click Add.
b) Enter the field name in the Field Name box.
NOTE: To display the keyboard, click Keyboard.
c) To set the field as mandatory, select Required next to the field name.
d) Click Update, or to exit without saving, click Cancel.
3) To add additional fields, repeat step 3.
187
188
4) To edit an existing field:
a) Click the field in the list, and click Edit.
b) Repeat steps 3b-3d.
NOTE: You cannot edit the field name of a default custom field.
5) To delete a field:
a) Click the field in the list, and click Delete.
b) In the confirmation message, click Yes.
6) Click Save in the Reports tab.
‎C hapter
10: Settings
10.3. System settings
Set the following in the System tab:
 Additional settings
 Extraction target
189
190
Define the following additional settings in the System tab:
1) To set the unit to make a sound for UFED 4PC operations such as failure, select Play notification
sounds.
2) To change the ULG log level, click
next to ULG logs level, and select one of the following:


Disable set to not generate log files.
Normal set to generate log files. If the transaction is very fast, not all the information is
written to the log.
 Detailed set to generate detailed log files. The transaction will be slower in order to
write to the log. Recommended in case of debugging/error situation.
3) To export system information, click Export system information.
4) To save the application logs, click Export application logs.
5) To monitor device usage, click the Transactions counter. This counts the number of transactions
performed on the UFED 4PC. Transactions include all extractions per type and device tool actions.
The counters are managed locally and can be reset.
NOTE: The password to rest the Transactions counter is the computer ID (displayed in the Version
tab).
‎C hapter
10: Settings
10.4. License settings
Change the license type in the License tab.
The current license type is displayed.
To change the license type, follow the instructions in Activating the license (page 29).
191
192
For software licenses, you can do the following:
 To deactivate the current license, click Deactivate.
 To update the license, click Update from file.
‎C hapter
10: Settings
193
10.5. Version details
The version details display information about the UFED 4PC version and build.
The Version tab displays current information regarding the license and the available version for
upgrade.
The following information is displayed:
 Version The application version
For more information on downloading a software update or new version, see Updates and versions .
194
10.5.1. Updates and versions
When UFED 4PC is connected to the Internet, automatic notifications appear in the event of updates
and new versions of the application.
 Click Refresh in the Settings > Version tab to update the information available on the screen.
To install a newer version of the UFED 4PC application via the web:
NOTE: Before using this option, ensure that the unit is connected to the network.
 In the Settings > Version tab, in the Version area, click Web.
The unit upgrades the application to the latest version available on the Cellebrite download server.
To install a newer version of the UFED 4PC application using the file option:
1) Download the latest application version from your account in MyCellebrite, and save it to the
specified directory on the PC or external device.
2) In the Settings > Version tab, in the Version area, click File.
3) Select the directory where you saved the file and then click Open.
‎C hapter
10: Settings
195
10.6. User permissions
UFED 4PC enables user authentication ensuring that only users with the right credentials can access
the application. Access rights are further enforced by defining permission levels per profile. For more
information, see Permission management page 197).
To import user permissions:
1) Run the UFED 4PC as an administrator.
2) Select Enable Users Permissions and click Import.
196
The following warning appears.
3) Click Yes and navigate to the directory where the permission management file (*.cp) is located. For
information on creating a permission management file, see Using the UFED Permission Manager
page 198).
4) Click Open and then click Save.
5) Restart the UFED 4PC application, which will now prompt for login credentials.
‎C hapter
10: Settings
197
6) Use one of the login credentials configured in the permission management file. For more
information, see Permission management .
10.6.1. Permission management
The administrator can create multiple profiles using the UFED Permission Manager standalone
application. Each profile contains access permissions, including operation rights per extraction type,
content types etc. A single profile can be assigned to multiple users. The users and profiles can be
exported into an encrypted permission management file, which can be imported into multiple UFED
4PC applications.
198
10.6.1.1. Using the UFED Permission Manager
To create a new profile:
1) Download the latest UFED Permission Manager application from your account in MyCellebrite, and
save it to a directory on a PC or external device.
2) Run the UFED Permission Manager and follow the setup instructions.
The UFED Permission Manager screen appears.
‎C hapter
10: Settings
3) Click Profiles.
4) Click New Profile.
The following screen appears.
199
200
5) Enter a name and description for this profile, and then click the Extraction Types tab.
‎C hapter
10: Settings
201
6) Select the options for this profile, such as Admin who can manage users, and the Extraction Type:
Logical Extraction, SIM Data extraction, Password extraction etc.
NOTE: At least of the enabled users must be an Administrator (Admin).
7) Click Save and proceed to create a new user.
202
To create a new user:
1) In the UFED Permission Manager screen, click Users.
The following screen appears.
2) Click New User.
‎C hapter
10: Settings
203
The following screen appears.
3) Enter the details for the new user including Username, Display Name, Description, and Password.
4) Select a profile for the user.
204
5) Click User is disabled to enable the user.
6) Click Save.
To export an encrypted permission management file:
1) In the UFED Permission Manager screen, click Export, specify a directory for the file and click Save.
The following screen appears.
2) Click OK.
NOTE: The next time you run the UFED Permission Manager you will be prompted for your user
credentials to access the application.
NOTE: Click Import to configure an existing permission management file.
‎C hapter
11: Special cables
205
Chapter 11: Special cables
UFED 4PC requires a special cable for certain functions known as the device power-up cable.
11.1. Device power-up cable
In case of a drained or absent battery, the device power-up cable powers the device instead of the
battery while performing an extraction.
The device power-up cable contains four parts marked as: Data, Extra power, "-", "+".
Figure 5: Phone power-up cable
206
To connect the device power-up cable:
1) Connect the Extra Power connector to the UFED 4PC USB Port extension.
2) Connect the Data connector to the UFED 4PC USB Port extension.
3)
contacts:


Open the device battery cover.
to the contacts area.


Remove the battery in
TIP:
on the battery body to identify them. To do that, simply flip the battery along its contacts edge,
and
those on the battery.
NOTE: Use a multi-meter to identify the positive and negative poles of an unmarked battery.
4) Connect the RED
Black alligator clip to
Black alligator to middle pole in case of three poles or to
the one next to the (-) in case of four poles. Make sure the alligator clips are not closing a circuit by
touching each other.
5) Connect the source device to the phone power-up cable using the references cable from the
cable organizer kit as listed in the UFED 4PC menu.
‎C hapter
11: Special cables
207
11.2. USB extension cable for UFED Device Adapter
In the Desktop environment where the computer is mounted in a difficult to access or distant location
the USB Extension cable for UFED Device Adapter should be used. This USB extension cable is
150cm in length and will allow for the easy and accessible placement of the UFED Device Adapter.
The USB Extension cable for UFED Device Adapter is a custom made high grade cable. This high
grade cable prevents voltage fluctuation and is shielded from EMI interference which would cause
signal degradation or loss.
If an extension cable is needed it is essential that the provided USB Extension cable for UFED
Device Adapter is used. Use of third-party cables will affect performance of your UFED 4PC and may
prevent some functions from starting or completing.
11.3. USB Cable for UFED Device Adapter PowerUP
Two USB PowerUP cables have been provided with your UFED 4PC.
 The USB Cable for UFED Device Adapter PowerUP S has been provide with your UFED 4PC for
use in the laptop environment. It is 75cm in length.
 The USB Cable for UFED Device Adapter PowerUP L has been provide with your UFED 4PC for
use in the Desktop environment. It is 150cm in length.
Both cables provide the same functionality and differ only in length.
208
The PowerUP cable has a miniUSB male end which will plug into the UFED Device Adapter and a
USB-A connector which can be plugged into any available powered USB port - including A/C
powered USB chargers and car chargers.
The PowerUP cable will double the power capacity of the UFED Device Adapter. This will ensure that
all devices with excess power requirements will function correctly and will allow UFED 4PC to provide
all functions. In addition devices that are fully discharged may need the additional power that the
PowerUp cable will provide.
In the desktop environment it is recommended that the PowerUp cable is used at all times.
In the laptop environment it is recommended that the PowerUp cable is used when UFED 4PC
indicates that the extra power is needed.
NOTE: The PowerUp cable is NOT required for smooth operation of the UFED 4PC for most devices,
but is provided for those cases where power consumption is above the capacity of the
unpowered UFED Device Adapter.
‎C hapter
12: Regulatory compliance
Chapter 12: Regulatory compliance
Part
UFED Standard and Ruggedized
CE
This device complies with the essential requirements the R&TTE 1999/5/EC Directive and the
following standards:
EMC
EN 301 489-1
EN 301 489-7
Safety
IEC/EN 60950-1, CB Scheme
Radio frequency
spectrum usage
EN 300 328 V1.7.1
FCC
EMC
FCC part 15, subpart B
Radio
FCC part15.247
209
210
‎C hapter
13: Extracting Android devices
211
Chapter 13: Extracting Android devices
This chapter covers the pros and cons of each Android extraction method, and provides answers to
frequently asked questions about the extraction methods.
13.1. Android extraction methods
Many different devices run the Android operating system: phones, MP3 players, tablets, eBook
Readers, and more.
There are two main extraction methods for Android devices:
 ADB debugging - extraction using a built-in protocol that runs within the operating system. This
method uses the Android Debugging Bridge (ADB), which is active when USB Debugging is
enabled. Using this method, it is possible to perform a physical or file system extraction on almost
any Android device, provided that the device USB debugging option is enabled. All currently
available Android OS versions are supported. For more information, see Android Debugging
Bridge method (page 212).
 Bootloader extraction - extraction that takes place before the Android operating system starts
running (several variations of this method are available). This method can be performed on locked
devices. For more information, see Bootloader extraction (page 215).
212
13.1.1. Android debugging bridge method
Q: How does ADB work?
A: ADB is a built-in protocol within the Android operating system. Every Android-based device has this
protocol, which enables developers to connect to an Android-based device and perform low-level
commands used for development. Cellebrite utilizes this protocol to extract data from Android
devices.
Q: Can ADB be used to extract any Android device?
A: In theory, data can be extracted from every Android device using ADB. However, there are some
limitations:
 The USB debugging option must be enabled on the device
 Access to the device must be with administrator permissions.
Q: How do I turn on the USB debugging option?
A: On most Android devices: go to Menu > Settings > Applications > Development and then click
USB debugging.
‎C hapter
13: Extracting Android devices
213
Q: Does this method bypass the unlock password or pattern? Will I be able to retrieve the
code?
A: The device USB debugging option must be
For locked devices, you can perform an extraction if the user enabled USB debugging before locking
the device.
For selected Android devices, you can perform a physical extraction, where there is greater support for
extraction from locked devices (pattern lock/PIN/password). Following a successful physical
extraction, you can view the numeric password or pattern lock protecting the device in UFED Physical
Analyzer, and use it to unlock the device.
Q: How do I get Administrator (root) permissions on the device?
A: When USB debugging enabled, UFED 4PC automatically detects the Android OS version, and
whether or not access is at administrator level. If it is not, UFED 4PC automatically gains root
permissions.
NOTE: It is possible to gain access at administrator level manually using third party tools, but gaining
access this way may harm the integrity of the data on the device, or has the potential to
render the device useless.
Q: I turned on USB debugging. What extraction types can I perform?
A: Once USB debugging is enabled, you can perform either a physical extraction which extracts all the
data on the device, or a File System Extraction which extracts only relevant files.
214
The advantage of a physical extraction is that it retrieves more data from the device, making it
possible to recover deleted files such as photos that were saved on the device. The disadvantage is
that it takes more time, and that file system reconstruction is not supported for all devices.
The advantage of a file system extraction is that it takes less time. You are able to view all vital
information including deleted records (but excluding deleted files), even if file system reconstruction
is not supported.
Q: When selecting the Generic Profile on UFED 4PC, what are "Method 1" and "Method 2"?
Which should I choose?
A: Methods 1 and 2 are different connection configurations. It is not possible to tell which Android
devices requires which method. Try one method, and if unsuccessful, try the second method.
Q: Does the ADB extraction method change any of the data on the device?
A: When extracting using the ADB method, a few client applications are written to the device
/data/local/tmp folder.
‎C hapter
13: Extracting Android devices
215
13.1.2. Bootloader extraction
Q: What is bootloader extraction?
A: The bootloader extraction method performs a physical extraction when the device is in bootloader
mode. In this extraction method, the Android operating system is not running, so the device cannot
connect to the mobile network.
Q: Does this method bypass the unlock password or pattern? Will I be able to retrieve the
code?
A: Using this method, you are able to bypass any type of lock, and can retrieve a numeric PIN lock or
unlock pattern.
Q: Does this extraction method change any of the data on the device?
A: No, this method is completely forensically sound.
Q: Which devices are supported by this method?
A: Currently most Motorola Android devices, and selected Samsung Android, Qualcomm, LG GSM, and
LG CDMA are supported.
216
13.2. Performing a file system extraction for an Android device
13.2.1. Locked Motorola devices
If you have a locked Motorola device, perform the following procedure to bypass the lock and
perform a file system extraction:
1) click File System Extraction.
The Select Vendor screen appears.
NOTE: If you do not see the device model in the list, select <Vendor> Generic option.
The Select Mode screen opens.
2) If lock bypass is supported for the device, select File System Bypassing Lock (Recommended).
3) Follow the on-screen instructions.
File system extraction is successful for locked Motorola devices in the following circumstances:


If lock bypass is supported for the device.
If lock bypass is not supported for the device, but the device USB debugging option is
enabled.
‎C hapter
13: Extracting Android devices
217
4) If lock bypass is NOT supported for the device, and the device USB debugging option is NOT
enabled, perform a physical extraction in order to retrieve the device lock code, and unlock the
device. Then follow the directions in Unlocked devices (page 219).
13.2.2. Locked HTC, Huawei, and ZTE devices
If you have a locked HTC, Huawei, or ZTE device, perform the following procedure to bypass the lock
and perform a file system extraction:
1) Click File System Extraction.
NOTE: If you do not see the device model in the list, select <Vendor> Generic option.
2) Follow the on-screen instructions.
File system extraction is successful for locked HTC devices in the following circumstances:


If lock bypass is supported for the device.
If lock bypass is not supported for the device, but the device USB debugging option is
enabled.
File system extraction is NOT successful for locked HTC devices in the following circumstances:

If lock bypass is NOT supported for the device, and the device USB debugging option is NOT
enabled.
218
13.2.3. Other locked devices
If you have a locked device that is not an HTC or Motorola device, perform the following procedure to
bypass the lock and perform a file system extraction:
1) Click File System Extraction.
NOTE: If you do not see the device model in the list, select <Vendor> Generic option.
2) Follow the on-screen instructions.
File system extraction is successful for locked devices if the device USB debugging option is
enabled.
3) If the device USB debugging option is NOT enabled, perform a physical extraction in order to
retrieve the device lock code, and unlock the device. Then follow the directions in Unlocked
devices (page 219).
‎C hapter
13: Extracting Android devices
219
13.2.4. Unlocked devices
If you have an unlocked device, perform the following procedure to perform a file system extraction:
1) Click File System Extraction.
2) Do one of the following:


For an advanced File System extraction including application system files, select Android FS
+ app sys. files.
For a standard File System extraction, select the device model.
NOTE: If you do not see the device model in the list, select <Vendor> Generic option.
3) Follow the on-screen instructions. File system extraction is successful for unlocked devices.
220
13.3. Technical terms
Android -
http://en.wikipedia.org/wiki/List_of_Android_devices . Another very helpful resource is
http://pdadb.net .
Brick - A device that cannot function in any capacity (such as a device with damaged firmware). Refer
to http://en.wikipedia.org/wiki/Brick_%28electronics%29 .
Client - A program written by Cellebrite that runs on the Android operating system itself.
Root/rooting - A process that allows users of cell phones and other devices running the Android
operating system to attain privileged control (known as "root access") within Android's Linux
subsystem, similar to jailbreaking on Apple devices running the iOS operating system, overcoming
limitations that the carriers and manufacturers put on such phones.
(http://en.wikipedia.org/wiki/Rooting_%28Android_OS%29 ).
‎C hapter
14: Appendix
221
Chapter 14: Appendix
IMPORTANT: PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. DOWNLOADING,
INSTALLING OR USING CELLEBRITE-SUPPLIED SOFTWARE CONSTITUTES ACCEPTANCE OF THIS
AGREEMENT.
CELLEBRITE IS WILLING TO LICENSE THE SOFTWARE TO YOU ONLY IF YOU ACCEPT ALL OF THE TERMS
CONTAINED IN THIS AGREEMENT (THE "EULA"), ANY ADDITIONAL TERMS IN AN AGREEMENT SIGNED
BY BUYER (AS DEFINED BELOW) AND CELLEBRITE AND ANY "CLICK-ACCEPT" AGREEMENT, AS
APPLICABLE. TO THE EXTENT OF ANY CONFLICT AMONG THIS AGREEMENT, ANY ADDITIONAL TERMS
IN AN AGREEMENT SIGNED BY BUYER AND CELLEBRITE, ANY "CLICK-ACCEPT" AGREEMENT, ANY TERMS
PRECEDENCE SHALL BE (A) AN AGREEMENT SIGNED BY BUYER AND CELLEBRITE; (B) THIS AGREEMENT;
(C) THE "CLICK-ACCEPT" AGREEMENT; (D)
TERMS AND CONDITIONS OF SALE OR AN AGREEMENT SIGNED BY BUYER AND CELLEBRITE
(COLLECTIVELY, (A)-(E), AFTER APPLYING THE ORDER OF PRECEDENCE, THE "AGREEMENT").
BY DOWNLOADING, INSTALLING OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR
AGREEMENT TO THE TERMS CONTAINED IN THE AGREEMENT, YOU INDIVIDUALLY AND ON BEHALF OF
THE BUSINESS OR OTHER ORGANIZATION THAT YOU REPRESENT (THE "BUYER") CONSENT TO BE
BOUND BY THIS AGREEMENT. IF YOU DO NOT OR CANNOT AGREE TO THE TERMS CONTAINED IN THE
222
AGREEMENT, THEN (A) DO NOT DOWNLOAD, INSTALL OR USE THE SOFTWARE (OR, AS APPLICABLE,
THE CELLEBRITE PRODUCT IN WHICH THE SOFTWARE IS EMBEDDED), AND (B) WITHIN THIRTY (30)
DAYS AFTER RECEIPT OF THE SOFTWARE (OR, IF AN AGREEMENT BETWEEN YOU AND CELLEBRITE
PROVIDES A SHORTER TIME PERIOD FOR ACCEPTANCE, SUCH SHORTER TIME PERIOD FOR
ACCEPTANCE), EITHER RETURN THE SOFTWARE TO CELLEBRITE OR THE APPLICABLE AUTHORIZED
RESELLER FOR FULL REFUND OF THE SOFTWARE LICENSE FEE, OR, IF THE SOFTWARE IS EMBEDDED IN
A CELLEBRITE PRODUCT FOR WHICH NO SEPARATE SOFTWARE LICENSE FEE WAS CHARGED, RETURN
THE EQUIPMENT AND EMBEDDED SOFTWARE, UNUSED, TO CELLEBRITE OR THE APPLICABLE RESELLER
FOR A FULL REFUND OF THE PURCHASE PRICE. YOUR RIGHT TO RETURN AND REFUND ONLY APPLIES
IF YOU ARE THE ORIGINAL END USER PURCHASER.
below) first placed in use by
Buyer on or after the release date of this EULA (the "Release Date").
4)
DEFINITIONS In this Agreement, the following capitalized terms shall have the meaning set
forth below:
"Affiliate
corporation, an entity under the control of such
purposes, "control" shall mean the power to direct or cause the direction of the management and
policies of the entity, whether through the ownership of more than 50% of the outstanding voting
interests in such entity or otherwise.
"Authorization Product" means a product sold by Cellebrite or an authorized reseller of Cellebrite
with embedded License Authorization Software, including but not limited to a USB stick with
embedded License Authorization Software.
‎C hapter
14: Appendix
223
"Authorized Users" means the number of Concurrent Users that Buyer is licensed to have access
to the Software.
"Cellebrite" means (i) Cellebrite Mobile Synchronization Ltd., an Israeli corporation with offices at
94 Em Hamoshavot Road, Petach Tikva, Israel 49130 or (ii) any subsidiary of Cellebrite Mobile
Synchronization Ltd. (Including without limitation Cellebrite USA Inc. and Cellebrite GMBH)
which is engaged by Buyer and issue invoices to Buyer with respect to the Software and/or the
Product; as applicable.
"Concurrent Users" means the number of Users of Buyer concurrently accessing the Software. If a
single User connects to Software using multiple concurrent log-ins or connections, each such
active logical connection or log-in is counted toward the number of Concurrent Users.
"Documentation" means any documentation related to any Software.
"Embedded Software" means a copy of Software delivered embedded in or loaded onto
Cellebrite hardware equipment when such equipment is sold by Cellebrite. Updates or Upgrades
to Embedded Software are also deemed "Embedded Software" to the extent such an Update or
Upgrade would be deemed Embedded Software without regard to this sentence had it been
delivered installed on the Cellebrite equipment.
"Forensic Product" means a Product used for the purposes of conducting forensic analysis,
including without limitation Products sold under the trade name "UFED".
"License Authorization Software" means Software that is provided together with hardware on
which it is embedded that is used to validate the authorized use of Standalone Software.
"License Term" means the term of a paid subscription to the Standalone Software.
224
"Product" means a product sold by Cellebrite or an authorized reseller of Cellebrite with
Embedded Software.
"Software" means an instance of a program, module, feature, function, service, application,
operation or capability of the Cellebrite-supplied software. Software includes Embedded
Software and Standalone Software.
"Standalone Software" means Software that is not Embedded Software or License Authorization
Software.
"Third Party
d
"Update" means an update to the Software or the Standalone Software that is provided by
Cellebrite and that may incorporate (i) corrections of any substantial defects; (ii) fixes of any minor
bugs; (iii) at the sole discretion of Cellebrite, allowing additional compatibility of the Software with
cellular phones provided by third parties; and/or (iv) at the sole discretion of Cellebrite, minor
enhancements to the Software or Standalone Software, as the case may be; provided, however,
that Updates shall not include Upgrades. Updates are generally identified by Cellebrite by a
change to the version number to the right of the first decimal point (e.g., version 4.1 to 4.2).
"Upgrade" means a new release of the Software or Standalone Software that incorporates
substantial changes or additions that (i) provide additional value and utility; (ii) may be priced and
offered separately as optional additions to the Software or the Standalone Software, as the case
may be; and/or (iii) are not ge
charge. Upgrades are generally identified by Cellebrite by a change to the version number to the
left of the first decimal point (e.g., version 4.2 to 5.0).
‎C hapter
14: Appendix
225
"User" means an individual able to gain access to any Software functionality (whether Embedded
Software or Standalone Software).
"You" means any individual seeking the benefit of or evaluating this EULA.
5)
A.
i.
ii.
LICENSE GRANT
Embedded Software. Subject to the terms and conditions of this Agreement, Cellebrite hereby
grants to Buyer, and Buyer accepts, upon delivery of the Embedded Software, a nonexclusive,
perpetual and nontransferable license to use (only if such use does not violate the prohibitions in
Sections 2.F or 2.G) each copy of the Embedded Software, in executable form only, provided by
with the Products, in the country in which the Product with the Embedded Software was
purchased from Cellebrite or an authorized reseller of Cellebrite and only as authorized in the
Agreement.
General Limitations. Buyer shall use Embedded Software solely for execution on the unit of
Product originally delivered to Buyer with such Embedded Software installed, or any replacement
unit provided under a warranty from Cellebrite. Any Update or Upgrade of such Embedded
Software that Cellebrite has licensed to Buyer may be loaded and executed only on the Product
on which the originally licensed Embedded Software is authorized to execute.
License Exclusion. Notwithstanding any other provision of this EULA, except as may otherwise
be required by applicable law, no license is granted for installation or use of any Embedded
Software or associated Update or Upgrade on any Product resold by anyone who is not an
authorized reseller of Cellebrite for such Product.
226
iii.
B.
Single Product
Embedded Software on one (1) Product for each Product purchased from Celle
authorized reseller.
Standalone Software. Subject to the terms and conditions of this EULA, Cellebrite hereby grants
to Buyer, and Buyer accepts, upon delivery of the Standalone Software, during the License Term, a
nonexclusive and nontransferable license to (i) use (only if such use does not violate the
prohibitions in Sections 2.F or 2.G) each copy of the Standalone Software, in executable form only,
l use, only
as authorized in the Agreement; (ii) only use a number of Concurrent Users that is equal to or less
than the number of Authorized Users specified in a written agreement signed by both the Buyer
and Cellebrite or purchase order accepted by Cellebrite, even if available on a higher number of
computer systems; (iii) make a reasonable number of copies of the Standalone Software for use
only as licensed in this Section 2.B, though in no case more than the number of Authorized Users;
and (iv) make one (1) copy of the Standalone Software for backup, archival or disaster recovery
purposes.
‎C hapter
C.
14: Appendix
227
License Authorization Software. Subject to the terms and conditions of this EULA, Cellebrite
hereby grants to Buyer, and Buyer accepts, upon delivery of the Standalone Software, during the
License Term, a nonexclusive and nontransferable license to use (only if such use does not violate
the prohibitions in Sections 2.F or 2.G) each copy of the License Authorization Software, in
executable form only, provided by Cellebrite, and the accompanying documentation, only for
Cellebrite or an authorized reseller of Cellebrite and only as authorized in the Agreement.
the License Authorization Software is limited to a license to use the License
Authorization Software on one (1) Authorization Product for each license to the Standalone
Software the authorized use of which is validated by such License Authorization Software and
D. Updates and Upgrades.
i. Updates. Updates or Upgrades to the Software may be made available to Buyer pursuant to a
separate agreement between Cellebrite and Buyer. Any particular Update or Upgrade shall
be licensed under the terms of the Software that is being updated by such Update or
Upgrade, as the case may be.
ii. Limitation. Except as expressly provided in the Agreement, Buyer shall have no rights in any
Update or Upgrade to Software, nor any rights to support services associated with such Software.
iii. No Obligation. Nothing in this EULA requires Cellebrite to provide Updates or Upgrades to Buyer
or Buyer to accept such Updates or Upgrades. The provision of any Updates or Upgrades shall
be governed by a separate agreement between Cellebrite and Buyer, or by a purchase order
E.
Specific License Terms for Particular Products.
228
i.
Forensic Products. Subject to the terms and conditions of this Agreement, Cellebrite hereby
grants to Buyer, and Buyer accepts, a nonexclusive, time-limited and nontransferable license,
effective upon delivery, to use (only if such use does not violate the prohibitions in Sections
2.F or 2.G) a copy of an Update or Upgrade to the Embedded Software, in executable form
use in connection with the Forensic Products or for a trial of such Update or Upgrade, as the
case may be, in the country in which the Forensic Product with the Embedded Software was
purchased from Cellebrite or an authorized reseller of Cellebrite and only as authorized in the
Agreement, for a period as specified by Cellebrite, but, in any case, no longer than seven (7)
days. Any time-limited license for the Embedded Software on a Forensic Product shall be
discretion. Buyer agrees to provide to Cellebrite one or more email addresses at which
Cellebrite can contact Buyer for communications from Cellebrite, including regarding
Updates or Upgrades. Buyer shall provide Cellebrite with updated email address(es) each
time such email address(es) change.
‎C hapter
ii.
iii.
14: Appendix
229
Forensic Products Exclusions. Any use or operation of the Cellebrite UFED family of products
(including without limitation, UFED Logical, UFED Ultimate, UFED Physical Analyzer) in
connection with any product and/or cellular device developed, manufactured, produced,
programmed, assembled or otherwise maintained by any corporation, shall be permitted only
after the User of the Cellebrite UFED family of products has obtained any consents or approvals
required (to the extent required) pursuant to applicable law in the jurisdiction in which such use
is made. UNDER NO CIRCUMSTANCES SHALL CELLEBRITE, ITS OFFICERS, EMPLOYEES OR
REPRESENTATIVES BE LIABLE TO USER OR ANY OTHER THIRD PARTY UNDER ANY CAUSE OF
ACTION (WHETHER IN CONTRACT, TORT OR OTHERWISE) FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, CONSEQUENTIAL, PUNITIVE, OR EXEMPLARY DAMAGES UNDER ANY LEGAL THEORY
WHATSOEVER ARISING OUT OF OR RELATING TO THE USE OF THE CELLEBRITE UFED FAMILY OF
PRODUCTS IN CONNECTION WITH ANY PRODUCT AND/OR CELLULAR DEVICE DEVELOPED,
MANUFACTURED, PRODUCED, PROGRAMMED, ASSEMBLED OR OTHERWISE MAINTAINED BY ANY
CORPORATION, WITHOUT OBTAINING THE APPLICABLE CONSENTS AND APPROVALS. User
agrees to indemnify and hold harmless Cellebrite its directors, shareholders and employees, from
and against any damages, claims, liabilities and expenses (including legal fees) arising as a result
of the use of the Cellebrite UFED family of products in connection with any product and/or
cellular device developed, manufactured, produced, programmed, assembled or otherwise
maintained by any corporation, without obtaining the applicable consents and approvals.
Reserved.
230
F.
G.
No Right to Sublicense or Assign. Except to the extent otherwise required by applicable law or
expressly provided for assignment generally in the Agreement, no license provided in this Section
2 is sublicensable, transferable or assignable by Buyer, including by operation of law, change of
control, merger, purchase or otherwise, without the prior written consent of Cellebrite in each
instance. Other than as expressly permitted by the foregoing, any attempted sublicense,
transfer or assignment by Buyer shall be null and void.
License Prohibitions. Notwithstanding anything to the contrary in this EULA, Buyer shall not,
alone, through a User, an Affiliate or a Third Party (or allow a User, an Affiliate or a Third Party to):
(a) modify any Software; (b) reverse compile, reverse assemble, reverse engineer or otherwise
translate all or any portion of any Software; (c) pledge, rent, lease, share, distribute, sell or create
derivative works of any Software; (d) use any Software on a time sharing, service bureau,
application service provider (ASP), rental or other similar basis; (e) make copies of any Software,
except as provided for in the license grant above; (e) remove, alter or deface (or attempt any of
the foregoing) proprietary notices, labels or marks in any Software; (f) distribute any copy of any
Software to any Third Party, including without limitation selling any Product with Embedded
Software in a secondhand market; (g) use any Embedded Software other than with Products
provided by Cellebrite or an authorized reseller of Cellebrite or for more than the number of
Products purchased from Cellebrite or an authorized reseller of Cellebrite; (h) disclose the results
of testing or benchmarking of any Software to any Third Party without the prior written consent
of Cellebrite; (i) use any Update or Upgrade beyond those to which Buyer is entitled or with any
Software to which Buyer does not have a valid, current license; (j) deactivate, modify or impair the
protection mechanisms or license management mechanisms (l) use the Software in violation of
any applicable law or to support any illegal activity; (m) use the Software to violate the rights of
‎C hapter
14: Appendix
231
any Third Party; or (n) attempt any of the foregoing. Cellebrite expressly reserves the right to
seek all available legal and equitable remedies to prevent any of the foregoing and to recover any
lost profits, damages or costs resulting from any of the foregoing.
H. Legal Exception. Buyer agrees that, to the extent that any applicable laws (including without
limitation national laws implementing EC Directive 91/250 on the Legal Protection of Computer
Programs) give Buyer the right to reverse engineer any Software to make it interoperable without
desire and, no later than sixty (60) days following receipt of such request, Cellebrite may decide
either: (a) to perform the work to achieve such interoperability and charge its then-standard rates
for such work to Buyer; or (b) to permit Buyer to reverse engineer parts of the Software only to the
extent necessary to achieve such interoperability. Only if and after Cellebrite, at its sole
I.
Network Usage. Buyer understand
and Internet connection for the limited purpose of transmitting license-related data at the time of
installation, registration, use or update of Software to a Cellebrite-operated license server. At
such time, Cellebrite may validate the license-related data in order to protect Cellebrite against
unlicensed or illegal use of the Software. Cellebrite may, at its option, only permit activation of
the Software upon exchange of license related data
license server.
6) OWNERSHIP Cellebrite (or its licensors) retains ownership of all right, title and interest in and to
the Software and Documentation and any derivative works thereof, and all copies of the Software.
Nothing in this EULA constitutes a sale, transfer or conveyance of any right, title or interest in the
Software or Documentation and any derivative works thereof. Notwithstanding anything to the
232
7)
8)
B.
ii.
contrary, all Software is licensed and not sold and any reference to a sale of Software shall be
understood as a license to Software under the terms and conditions of the Agreement.
CONFIDENTIALITY Buyer agrees the Software and Documentation are the confidential
information of Cellebrite. Buyer shall maintain the Software and Documentation in confidence,
using the same degree of care it uses for its own confidential information, but at least reasonable
care.
EXCLUSIVE REMEDIES AND LIMITATION OF LIABILITY.
A. Definitions. For purposes of the exclusive remedies and limitations of liability set forth in this
Section 5, Cellebrite shall be deemed to include its subsidiaries and affiliates and the directors,
officers, employees, agents, representatives, shareholders, subcontractors and suppliers of
each of them; and "damages" shall be deemed to refer collectively to all injury, damage, loss
or expense incurred.
Exclusive Remedies
for any damages caused by any Software defect or failure, or arising from the performance or
non-performance of any obligation hereunder, regardless of the form of action, whether in
contract, tort including negligence, strict liability or otherwise shall be:
i.
damages; and
ages
that are proven, in an amount not to exceed the total amount paid by Buyer to Cellebrite during
the twelve (12) month period that immediately preceded the event that gave rise to the
applicable claim.
‎C hapter
14: Appendix
233
C.
Limitation of Liability. Notwithstanding any other provision of this EULA, CELLEBRITE shall NOT
be liable for incidental, indirect, special, exemplary or consequential damages, including but not
limited to lost profits, savings or revenues of any kind, whether or not CELLEBRITE has been
advised of the possibility of such damages. This provision shall APPLY EVEN IN THE EVENT OF
THE failure of an exclusive remedy.
D. No Liability to any Third Party. TO THE MAXIMUM PERMITTED EXTENT, CELLEBRITE DISCLAIMS
ANY AND ALL LIABILITIES OR OBLIGATIONS WHATSOEVER RELATED TO THE SOFTWARE OR ITS
LICENSING TO OR USE BY ANYONE OTHER THAN BUYER.
9) BUYER INDEMNITY Buyer will, at its expense: (i) indemnify and hold Cellebrite and its affiliates,
officers and directors harmless from any claim (whether brought by a Third Party or an employee,
Agreement was used in a manner other than as authorized under this EULA, including but not
limited to using the Product or Software in a manner that vio
rights under the United States Constitution (or its equivalent in the Territory) or misappropriating a
costs and liabilities (including reasonable attorney fees) incurred relating to such claim; and (iii) pay
all settlements, damages and costs assessed against Cellebrite and attributable to such claim.
10) DISABLING CODE
A. Disabling Code. Software may be provided to Buyer with disabling code that allows
Cellebrite to disable such Software or the Products such Software is embedded in. Any
Updates or Upgrades to the Software may include disabling code. Cellebrite agrees not to
invoke such disabling code except as provided for in
consent, which may be given by telephone or email.
234
B.
Invocation of Disabling Code. In addition to the invocation of disabling code when Cellebrite
ts option, invoke
reasonable discretion, Cellebrite believes that such Software has been, is being or will be used in
violation of laws; (ii) if Cellebrite is required to do so, because of a court or regulatory order; (iii) if
Buyer has not paid an outstanding invoice more than sixty (60) days after such invoice is due; or
llebrite shall
have no liability to Buyer for any good faith invocation of any such disabling code.
11) TERM AND TERMINATION
A. Term
Notwithstanding the foregoing, (i) the license to any Embedded Software may be terminated
if Buyer has not paid an invoice sixty (60) days after such invoice is due; and (ii) the license to
any Standalone Software is only during the License Term. The License Term shall be
determined in a separate agreement between Cellebrite and the Buyer.
B. Termination. Cellebrite shall have the right to terminate this EULA upon thirty (30) days prior
written notice to the other party if such other party has not cured any material breach of this
EULA by the end of such thirty (30) day notice period. Upon termination of this EULA for any
reason, (i) Buyer shall be responsible for payment for all purchase orders delivered to Buyer by
Cellebrite before the effective date of termination; and (ii) Buyer shall destroy all copies of the
‎C hapter
C.
14: Appendix
235
Survival. The provisions of Sections 1, 2.C, 2.E, 2.F, 2.G, 3, 4, 5, 6, 7, 8.C, and 9-13 of this EULA shall
survive any termination in accordance with their terms. In addition, any purchase order
accepted by Cellebrite prior to the effective date of termination shall survive in accordance with
its terms.
12) CHOICE OF LAW; JURISDICTION The construction, interpretation, and performance of the
Agreement and all transactions under it shall be governed by the laws of the State in which the
Cellebrite entity engaged by Buyer is incorporated (the "Governing State"), excluding its choice of
law rules and excluding the Convention for the International Sale of Goods. Buyer acknowledges
that the courts of the Governing State shall have exclusive jurisdiction with respect to any dispute
arising under this Agreement, which is initiated against Cellebrite by Buyer or any Third Party on its
behalf. Notwithstanding the above: (i) to the extent Cellebrite Mobile Synchronization Ltd. has
engaged Buyer, the courts of Tel-Aviv shall have exclusive jurisdiction with respect to any dispute
arising under this Agreement, which is initiated against Cellebrite by Buyer or any Third Party on its
behalf; and (ii) to the extent Cellebrite USA Inc. has engaged Buyer, the courts of the State of New
York shall have exclusive jurisdiction with respect to any dispute arising under this Agreement,
which is initiated against Cellebrite by Buyer or any Third Party on its behalf. For the avoidance of
any doubt, Buyer further acknowledges and agrees that Cellebrite shall be allowed, at its sole and
absolute discretion, to initiate any dispute against Buyer in any jurisdiction worldwide (whether in
or outside the Governing State), including with respect to any application for injunctive remedies
(or an equivalent type of urgent legal relief).
13) ASSIGNMENT Neither party may assign its rights and obligations hereunder without the prior
written consent of the other party. Notwithstanding the foregoing, either party may assign this
EULA to any Affiliate of the other or to an acquirer (by purchase, merger or otherwise) of all or
236
assignee agrees in writing to be bound by the terms and conditions of this EULA, (ii) neither the
assignor nor assignee are in default hereunder. Any attempted assignment other than as
permitted shall be null and void.
14) NON-WAIVER No course of dealing or failure of either party to strictly enforce any term, right or
condition of this Agreement shall be construed as a waiver of such term, right or condition.
15) ENTIRE AGREEMENT The terms and conditions contained in this Agreement supersede all prior
oral or written understandings between the parties and shall constitute the entire agreement
between the parties with respect to the subject matter of this Agreement, except as provided for
in the preamble to this Agreement regarding the order of precedence. This Agreement shall not
be modified or amended except by a writing signed by Buyer and Cellebrite.
‎C hapter
16)
14: Appendix
237
CONSTRUCTION; SEVERABILITY The headings used in this Agreement are for reference
purposes only and will not be deemed to limit, expand or in any way affect the interpretation of
any term or provision hereof. If any provision or part hereof shall be held to be invalid or
unenforceable for any reason, then the meaning of such provision or part hereof shall be
construed so as to render it enforceable to the extent feasible. If no feasible interpretation
would save such provision or part hereof, it shall be severed herefrom, but without in any way
affecting the remainder of such provision or any other provision contained herein, all of which
shall continue in full force and effect unless such severance effects such a material change as to
render the Agreement unreasonable. In case of any inconsistency between this Agreement and
any other agreement, document and/or instrument entered into by Buyer and Cellebrite, the
terms of this Agreement shall prevail.
17) WARRANTY
A. Hardware Warranty. Cellebrite warrants that each Product, including all firmware and
excluding Software (for which the warranty is only as provided under Section D below), but
not related services or prototypes of any such Product, shall be materially in conformance
with the written specification furnished or agreed to by Cellebrite for twelve (12) months after
acceptance (the "Warranty Period"). If any failure to materially conform to such specification
("Defect") is suspected in any Product during the Warranty Period, Buyer, after obtaining
return authorization information from Cellebrite, shall ship suspected defective samples of the
e accepted
for repair, replacement, credit or refund without the written authorization of Cellebrite.
Cellebrite shall analyze the failures, making use, when appropriate, of technical information
provided by Buyer relating to the circumstances surrounding the failures. Cellebrite will verify
whether any Defect appears in the Product. If a returned Product does not have a Defect,
238
Buyer shall pay Cellebrite all costs of handling, inspection, repairs and transportation at
-prevailing rates. If a returned Product has a Defect, Cellebrite shall, at
Product without charge or, if such repair or replacement has not occurred by the thirtieth
(30th) day follo
option) the purchase price within ten (10) days after such thirtieth (30th) day; provided: (i)
Buyer notifies Cellebrite in writing of the claimed Defect within thirty (30) days after Buyer
knows or reasonably should know of the claimed Defect, (ii) the claimed Defect actually exists,
and (iii) the Defect appears within the Warranty Period. Cellebrite shall ship any replacement
B.
event shall Cellebrite be responsible for de-installation or reinstallation of any Product or for
the expenses thereof. Repairs and replacements covered by the above warranty are
warranted to be free from Defects as set forth above with respect to any Defect that appears
(i) within six (6) months from the date of repair or replacement or (ii) prior to the expiration of
the original Warranty Period, whichever is later.
Touch Screen Exclusion. Notwithstanding Section A, the Warranty Period for the touch screen of
Product until thirty (30) days after such date, and Cellebrite warrants such touch screen only to
‎C hapter
14: Appendix
239
C.
Warranty of Title. Cellebrite warrants that any title conveyed hereunder (excluding Software)
shall be good and its transfer rightful, and that the Products delivered under this EULA shall be
free from all liens, encumbrances and restrictions. Cellebrite further warrants that it has all rights
and powers necessary to perform its obligations under this EULA and that to its knowledge, it has
the right to grant the licenses and other rights provided to Buyer by this EULA.
D. Software Warranty. Cellebrite warrants to Buyer that for a period of sixty (60) days after the date
of shipment, the Software will perform substantially in conformity with its Documentation. As
E.
its sole obligation, promptly repair or replace any Software that fails to meet this limited warranty.
Exclusions. Notwithstanding anything to the contrary in this warranty, the warranties herein do
not apply to, and Cellebrite makes no warranties with respect to defects in Products or Software
use, damage, or unauthorized modification of the Products
other than as authorized in writing by Cellebrite; (c) placement of the Products or Software in an
operating environment contrary to specific written instructions and training materials provided
damage, fire, loss or theft of a Product; (e) cosmetic damage to the outside of a Product, including
ordinary wear and tear, cracks or scratches; (f) for any Product with a touch screen, any defect in
such a touch screen after thirty (30) days from the date of receipt of such Product, or any defect
caused in a tou
Products or Software in a manner that is contrary to specific written instructions provided by
Cellebrite to Buyer; (h) a product or service not provided, authorized or approved by Cellebrite for
use with the Products or Software; (i) any repair services not authorized or approved by Cellebrite;
(j) any design, documentation, materials, test data or diagnostics supplied by Buyer that have not
240
been authorized or approved by Cellebrite; (k) usage of any test units, experimental products,
prototypes or units from risk lots (each of which is provided "AS IS"); (l) any third party original
F.
the phones or models of phones from working with the Products or Software; (m) any damage to
a third party device alleged to or actually caused by or as a result of use of a Product or Software
with a device; (n) any Products that have had their serial numbers or month and year of
manufacture or shipment removed, defected or altered; (o) any interactions or other effects
relating to or arising out of the installation of copies of the Software beyond the number of
copies authorized by an agreement between Cellebrite and Buyer; (p) use of Products or Software
incorporated into a system, other than as authorized by Cellebrite; or (q) any Products or Software
that has been resold or otherwise transferred to a third party by Buyer (any Product or Software
affected by the cases in (a)-(q) is referred to hereinafter as an "Excluded Item").
It is expressly clarified that (i) the operation of the Software and/or Product will not be error-free;
(ii) not all defects in the Software and/or Product will be corrected; (iii) the Software may not
operate on hardware or operating systems or in conjunction with other software other than as
expressly specified in the Documentation or approved by Cellebrite in writing.
‎C hapter
G.
14: Appendix
241
Warranty Limitations. EXCEPT AS STATED IN THIS WARRANTY, CELLEBRITE, ITS SUBSIDIARIES AND
AFFILIATES, SUBCONTRACTORS AND SUPPLIERS MAKE NO WARRANTIES, EXPRESS OR IMPLIED,
AND SPECIFICALLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A
F
TO REPAIR OR (ii) TO REPLACE OR, (iii) IF NEITHER (i) NOR (ii) IS COMMERCIALLY FEASIBLE, TO
AIMER
AND EXCLUSION SHALL APPLY EVEN IF THE EXPRESS WARRANTY FAILS OF ITS ESSENTIAL
PURPOSE. THE ENTIRE RISK ARISING OUT OF THE USE OR PERFORMANCE OF THE SOFTWARE AND
PRODUCT REMAINS WITH BUYER.
H. Repaired or Replaced Products. Before returning a Product for service, Cellebrite recommends
that Buyer back up any data contained in such a Product. IN NO EVENT WILL CELLEBRITE, ITS
AFFILIATES OR SUPPLIERS BE LIABLE TO BUYER OR ANY THIRD PARTY FOR ANY DAMAGES OF ANY
KIND WHATSOEVER RELATING TO OR ARISING OUT OF DAMAGE TO, OR LOSS OR CORRUPTION
REPLACEMENT SERVICES UNDER THIS WARRANTY, OR AS A RESULT OF A FAILURE OR
MALFUNCTION OF A PRODUCT.
242
Index
Index
A
Capture i
Activating the license
177
Android Debugging Bridge method
Clone SIM
B
Bluetooth Scan
D
C
Capture
Device power-
244
E
L
Extracting And
License settings
F
File system extraction
Logical extraction
G
M
Managing the Custom List
H
O
I
Image capture
Other locked devic
Index
S
P
screenshots
Password extraction
Performing File System extraction for an Android
Performing password
Physical extraction
R
SIM data extraction
246
T
Unlocked devices
207
V
U
UFED 4PC
W
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising