Catalogue - bsa power
Product Catalogue
UPS and Power
Quality Products
Australia and New Zealand
Contents
Corporate Overview .........................................................................3
3 Phase UPS .....................................................................................42
Eaton E Series DX ...................................................................................42
Sustainable by Design.....................................................................4
Eaton 9355.................................................................................................44
Eaton BladeUPS™...................................................................................46
About Eaton's Solutions ..................................................................5
Eaton 93E ..................................................................................................48
UPS Solution Overview ............................................................................6
Eaton 93PM ..............................................................................................50
Eaton Power Xpert 9395 .........................................................................52
Advanced Technologies ..................................................................7
Hot Sync® Technology ............................................................................8
ABM® Technology ...................................................................................9
Intelligent Power® Distribution .................................................54
Energy Advantage Architecture – Energy Saver System ................10
Airflow management and racks ..................................................55
Energy Advantage Architecture – Variable Module
Management System..............................................................................11
Aisle containment ...................................................................................55
Rack containment ...................................................................................56
Enterprise-class racks ...........................................................................57
Protecting your investment ..........................................................12
Rack accessories ....................................................................................57
Service ......................................................................................................12
Extended Service Plans .........................................................................13
Series 3 Single Phase UPS............................................................14
Eaton 3S ....................................................................................................14
Intelligent Power® Software Suite ...........................................58
Options to Manage and Monitor Your UPS ...............................59
Eaton's Power Xpert® Architecture ...................................................60
Eaton Ellipse ECO........................ ............................................................15
Series 5 Single Phase UPS...........................................................16
Eaton 5E ....................................................................................................16
Power Management ...............................................................................61
Surge Protection Devices .............................................................64
Surge Protection Equipment Overview ...............................................64
Eaton 5S ....................................................................................................17
Eaton 5SC..................................................................................................18
Power Conditioners .......................................................................65
Eaton 5P ....................................................................................................20
Sola Power Conditioners .......................................................................65
Eaton 5130.................................................................................................22
Sola 200/210..............................................................................................66
Eaton 5PX..................................................................................................24
Sola 200 .....................................................................................................67
Sola 26 Multivolt ......................................................................................68
Series 9 Single Phase UPS...........................................................26
Eaton E Series DX ...................................................................................26
Eaton EX........................ ............................................................................28
Support ............................................................................................69
Eaton 9130 Tower.....................................................................................30
Support......................................................................................................69
Eaton 9130 Rack ......................................................................................32
Eaton 9SX..................................................................................................34
Eaton 9PX..................................................................................................36
Eaton 9155.................................................................................................38
Eaton MX Frame ......................................................................................40
2
EATON CORPORATION UPS and Power Quality Products Catalogue
Corporate overview
Powering Business Worldwide
Founded in 1911, Eaton® is a diversified industrial manufacturer and a global leader in various
industrial markets, including:
• Electrical systems and components for power quality, distribution and control
• Hydraulics components, systems and services for industrial and mobile equipment
• Hydraulics, fuel and pneumatic systems for commercial and military aircraft
• Intelligent truck drivetrain systems for safety and fuel economy
• Automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety
Eaton has approximately 102,000 employees worldwide
and sells products to customers in more than 175 countries.
www.eaton.com/powerquality 1300 UPS UPS
3
Sustainable by Design
Sustainability has always been at the heart
of Eaton's business – this means meeting the
current needs of our society while enabling
future generations to meet their own needs.
Sustainable design for our products means
helping our customers utilise electrical power
more efficiently while significantly improving
environmental performance.
At Eaton, we apply the ISO 14001, an international environmental
management system, on site and R&D certification to all of our facilities.
In addition, to clearly demonstrate and communicate the environmental
value of the products to customers and consumers, Eaton has developed
a rigorous evaluation process based on the guidelines of international
organisations such as the International Standards Organisation (ISO).
Eaton products and services meeting the environmental standards of this
process earn the Eaton “Green Leaf” label. Though all of our products
are designed to meet government standards and public expectations
for protecting the environment, “Green Leaf” products and solutions
go well beyond normal standards to provide exceptional benefit to our
customers and the environment.
We also care for the way our parts and materials are supplied. Eaton is
a part of Green Suppliers Network, a network that helps its component
suppliers to develop “Lean and Clean” manufacturing processes that
result in reduced waste and saved money, all while reducing their
impact on the environment.
For more information on how Eaton is Sustainable by Design, please visit
www.eaton.com/sustainability.
™
4
EATON CORPORATION UPS and Power Quality Products Catalogue
About Eaton's Solutions
Eaton offers the largest selection
of power management and
protection solutions available in
the industry. From the desktop to
the data centre, from AC-powered
to DC-powered equipment, Eaton
is your one-stop partner for all
your power needs.
Eaton's Power Quality solutions provide the confidence that power
problems will not disrupt your systems, data and operation. Delivered
through more than 50 years of solid performance, in-depth knowledge
of customer applications, continuous innovations and world-class
services. Eaton solutions have been recognised by UPS users and
industry experts for delivering highest customer value and satisfaction,
as well as for demonstrating most insight into customer needs among all
UPS vendors.*
Eaton product and service range
* Frost & Sullivan Award for Customer Value and Satisfaction and Frost
& Sullivan Award for Product Line Strategy.
• Technical support and maintenance
• AC UPS from 550VA up to 3500 kVA
• DC systems of all sizes
• A broad portfolio of rack-based power distribution
units (ePDU™)
• IT rack enclosures, airflow management and heat containment systems
• Software and connectivity products for power management and
remote control
• Complete power quality solutions
Eaton products are manufactured in factories located in Finland, USA,
China, Taiwan, India, Morocco and New Zealand.
www.eaton.com/powerquality 1300 UPS UPS
5
UPS Solution Overview
Selecting the Right UPS
Eaton's power management solutions are based on protecting the
nine most common power problems present in any environment. This
unique approach makes your product selection decisions about power
protection much simpler. The nine power problems listed below are
potentially harmful to both your data and your hardware. Eaton's
products offer three levels of power protection:
Series 3, Series 5 and Series 9. Based on the parameters defined by your
application, you can select an uninterruptible power system (UPS) from
the series that best matches your power protection needs.
To provide maximum power protection, Eaton offers a full line of Series
9 UPSs with both single-phase and three-phase models in the Series 9
family.
Within each Series, Eaton has created 3 classes of products; to provide
"Good, Better and Best" levels of features and performance and enable
the best product fit for any application and budget.
Standby UPS: Backup power
Power Failure
Power
Sag
Power
Surge
AC to DC
Rectifier
DC to AC
Inverter
The Eaton's series 3 UPS primarily protects against three of the nine power problems
including power failures, power sags and power surges. This essential, cost-effective
protection is necessary in order to prevent damage such as data loss, file corruption,
hardware damage and equipment shutoff. For example, if your utility fails you could lose
all of your work-in-progress. The Series 3 UPS offers a degree of protection against the
remaining power problems and is most commonly used to protect single workstations and
point-of-sale (POS) equipment.
Battery
Line Interactive UPS: Keeping it smooth
Buck Boost
Power Failure
Power
Sag
Power
Surge
Undervoltage
Overvoltage
Eaton's series 5 UPS are most effective against five power problems (power failures, power
sags, power surges, under-voltage and over-voltage) and offer a degree of protection
against other power problems. Some of the damages you risk by not using a Series 5 UPS
include premature hardware failure, data loss and corruption, data error, keyboard lockup,
storage loss and system lockup. Series 5 UPSs are recommended for small network systems
- all the way up to enterprise networking environments.
AC to DC
Rectifier
DC to AC
Inverter
Battery
On Line Double Conversion UPS: Total Protection
Power
Failure
Power
Sag
Power
Surge
Undervoltage
Overvoltage
Line
Noise
Frequency
Variation
Eaton's series 9 UPSs protect against all nine power problems: power failures, power
sags, power surges, under-voltage, over-voltage, line noise, frequency variation,
switching transients and harmonic distortion. Eaton's series 9 comprehensive
protection minimises the opportunity for component stress, burnt circuit boards,
data crashes and program failures. Series 9 UPSs offer the highest level of power
protection available and are always recommended for mission-critical applications
like server farms, hospitals and Voice Over Internet Protocol (VOIP) applications.
6
EATON CORPORATION UPS and Power Quality Products Catalogue
Switching
Transient
Harmonic
Distortion
Internal Static Bypass
AC to DC
Rectifier
DC to AC
Inverter
Battery
Advanced Technologies
Eaton has been developing its innovative
technical solutions in the power protection
field since receiving its first patent in 1962. As
a technology leader Eaton meets the customers’
fast growing needs with advanced patented
technologies.
Eaton’s three-phase UPS products are based on the same technical
platform, including a similar internal topology, common control hardware
and algorithms, standardised communications capabilities and a
common user-interface.
Single platform benefits
• UPS units behave in a uniform way and carry
similar features
• Product upgrades are easier as the process
is identical
• Improved service capabilities due to usage of
common spare parts and accessories across
product families and standard service tools
• Similarity of service training and documentation
guarantee that customers in all countries receive
the same high level of service
• Lower total cost of ownership
Transformer-free
Technology
The transformer-free technology used in Eaton UPSs with small and
lightweight filter inductors, high performance IGBTs in both inverter and
rectifier, and advanced control algorithms brings improved performance
and value. Compared to legacy UPS topology designs, a transformer-free
UPS is typically only 50% the weight and occupies just 60% the footprint.
Low input THD (<5% at full load) and high input power factor (>0.99) are
supported down to nearly 10% load without the need for an additional
input filter. In addition, full load efficiency can reach up to 97%.
User benefits
• High efficiency
• Less weight
• Smaller footprint
www.eaton.com/powerquality 1300 UPS UPS
7
Hot Sync® Technology
The number one function of a UPS is to supply continuous conditioned,
reliable electricity to critical loads. In the case of a single unit, reliability
can be increased by modular design, where redundant internal modules
can take over each others’ tasks, if one of the modules fails. To further
increase reliability, a true parallel configuration can be employed,
where two or more units share the load. A failed unit is isolated while
the remaining ones continue to support the critical load. Competitive
UPS products on the market utilise centralised or distributed load
sharing technology with a Master-Slave principle, which introduces
a risk of single point failure. The absolute reliability of a UPS system
can be reached with patented Eaton Hot Sync® parallel load sharing
technology. (Figure 1)
Hot Sync® technology is designed for parallel redundant N+1 systems to
User benefits
• Available for both single and three-phase products to meet any
mission-critical need up to 3.5 MVA (400V) systems
• Easy and modular parallel UPS system upgrade with additional
capacity or redundancy
• Eliminates single point of failure
satisfy 24/7 applications. It can also be used in parallel capacity systems
to benefit from scalability for customers' ever-increasing load demands.
Hot Sync® eliminates single point of failure, with the ability to
Hot Sync
20%
synchronise and support critical loads independently of other UPS
modules in the system. UPS modules can share loads without any
communication wiring to the outside world.
Failure probability / year
The secret here is a patented built-in digital signal processor (DSP)
algorithm, running continuously in each unit. It drives the UPS outputs
toward synchronisation and takes care of load sharing. If there is a
common bypass available, it is used as valid synchronisation source for
output. In the absence of common bypass, the processor makes subtle
adjustment to the inverter frequency on the basis of output power level
measurement in order to find a common frequency and load balance
among the units. There exists, as shown in Figure 2, a relationship
between the power imbalance and the voltage phase difference.
Hot Sync® technology allows full maintenance to be performed one-by-
Utility
No common logic
Single UPS
Modular UPS
Parallel redundant UPS
Hot Sync
10%
99,99%
99,999%
99,9999%
Figure 1. Patented Hot Sync® technology provides the highest availability for
load.
one on redundant UPS modules without an external maintenance bypass
switch. The critical load does not need to be disconnected from the
conditioned power. Scheduled or unscheduled maintenance can
be perfomed with the load supported continuously by the UPS-grade
clean power.
UPS 1
f1
UPS 2
f2
P1
P2
P1
P1+2
P2
Power level difference diminishes
Frequencies are continuously
adjusted based on P1 and P2
Voltages out of phase
Outputs are synchronised
VUPS 1
VUPS 2
Parallel Output, Load Bus
8
Figure 2. Well-balanced load share is achieved by adjusting output frequencies;
thus the phase difference between parallel UPS output voltages is forced to zero.
EATON CORPORATION UPS and Power Quality Products Catalogue
ABM® Technology
Battery service life is a major contributor to UPS reliability. Since
batteries are electro-chemical devices, their performance gradually
decreases over time. Premature wear-out means higher costs in terms
of replacement labour and shorter service cycle. A worn battery entails
a risk of unexpected load loss. In normal UPS operation, back-up power
is needed only occasionally and the battery ‘wearing’ rate depends
strongly on how the full charge is being maintained. Excess charging is
detrimental under any operating circumstances.
Eaton has created ABM® Technology to extend the life of valve
regulated lead-acid batteries by applying sophisticated logic to the
charging regime. Using traditional trickle charge method, batteries
become subject to electrode corrosion and electrolyte dry-out,
especially in standby service use due to continuous float charging.
ABM® is essentially an addition of intelligence to the charging routine
by preventing charging when it is not necessary, thus significantly
retarding wear-out. ABM® provides an additional feature for monitoring
battery condition and advance warning about the end of battery life upon
detection of a weak battery. Also, it optimises the recharge time, which
is advantageous when there may be consecutive power outages within
a short period. ABM® has been used for over fifteen years in our UPSs
ranging from 1 to 160 kVA and is now applied in UPS' up to 1100 kVA.
ABM® cycle and operation – how does it work?
The basic idea about ABM® is to leave a fully charged battery in rest
mode for most of the time, and then apply charge current only at certain
intervals. Initially, in order to charge up a fully or partly discharged
battery, the charger starts at a constant current appropriate for the
battery type used. When the battery voltage reaches a set level
the operation is changed to float mode using a constant but lower
voltage, thus providing an optimum recharge time. The battery is kept
at this voltage for 24 hours until it comes to the first test point. This
takes approximately one minute and during this period voltage drop
measurements are taken while loading the battery, giving an indication
of battery condition. The float charging is continued for an additional
24 hours, plus a period equal to 1.5 times the constant current charging
time, before the rest mode is initiated. At this point, the charging is
discontinued for a maximum of 28 days – as if the batteries were
Battery voltage during ABM® charging process.
User benefits
• Predictive and automatic diagnostics of Battery Health
• Significant extension of battery life compared
to traditional charging method
• Optimisation of battery recharging time
with dual mode charging method
• Automatic battery charge voltage compensation within
0 to +50ºC temperature range
disconnected. During the first 10 days the battery voltage is continuously
monitored, and if it drops below 2.1 V/cell, the ABM® re-starts in charge
mode and the user gets a notification of improper battery operation. If
it drops below this limit after the 10 day period, charging is resumed
without alarm. In short, the algorithm uses three charging stages in its
operation. Thus, the batteries experience much less stress than in the
case of traditional charging. A typical battery charging cycle without
power interruptions is shown in the graph below.
ABM® technology significantly increases battery service life
www.eaton.com/powerquality 1300 UPS UPS
9
Energy Advantage Architecture – Energy Saver System
Energy Advantage
Architecture (EAA)
The rising demand for highly available, reliable and efficient power is a
continuous challenge for data centre operators. Higher energy efficiency
helps to address increasing environmental, regulatory and economic
pressures.
Eaton has developed innovative and proprietary technologies that
improve system efficiency without compromising on reliability under the
Energy Advantage Architecture (EAA) umbrella.
ESS allows for market leading 99 percent efficiency
Energy Saver System (ESS) is one of these technologies.
Maximised energy efficiency
With 85% reduction in UPS energy losses, ESS technology dramatically
reduces energy consumption, environmental impact and power costs
without compromising load protection. Those outstanding energy savings
typically recovers 100% of the UPS cost over a 3 - 5 year period.
across the entire operating range. Compared to conventional ‘eco-mode’
capabilities available with legacy products, ESS offers the best possible
efficiency and the fastest transition times to double conversion when
power disturbances occur.
No compromise on reliability
In ESS mode the UPS safely provides mains current directly to load when
the input is within the acceptable limits by its voltage and frequency. If
input power goes outside the preset limits by frequency or voltage, the
UPS switches to double conversion.
If input power is outside the tolerances of the system, the UPS draws
power from available battery modules.
Superior detection and control algorithms continuously monitor incoming
power quality and allow the UPS to engage power converters in less
than two milliseconds time when utility source goes out of pre-defined
limits by its voltage or frequency, thus always providing secured power
to the critical load while maximising efficiency. In case of UPS detecting
a fault condition while operating in ESS, the UPS is capable to detect and
determine whether the fault is caused by load or if it is upstream from
the UPS. A fault at the bypass source results in immediate switchover to
the inverter; a fault in the load keeps the UPS in Energy Saver System.
Proven Eaton technology ensures reliability and continuous load
availability without compromising the protection of the supported
equipment.
Extensive configurability
Eaton UPS with Energy Saver System features three configurable modes
of operation:
• Standard double conversion mode: the UPS operates as normal,
supplying power through the power converters
• Energy Saver System: the power converters are in ready state and the
static bypass switch allows the UPS to supply mains power directly
• High Alert mode: the UPS automatically transfers from ESS to double
conversion and in case of multiple reoccurring utility line disturbances
it stays there for preconfigured time (default 1 hour) until it is safe to
return to ESS
UPS seamlessly executes transitions through different operating modes
as needed. This is only possible with transformer-free topologies.
Availability
ESS is available to all 93PM and PowerXpert 9395 UPSs. Also parallel
UPS systems support operation in ESS mode. All earlier made
installations can be upgraded with ESS capability.
10
EATON CORPORATION UPS and Power Quality Products Catalogue
Energy Advantage Architecture – Variable Module Management System
Variable Module
Management System
(VMMS)
Variable Management Module System (VMMS)
is a key component of Energy Advantage Architecture. Eaton VMMS
technology maximises UPS efficiencies at low load levels while
supplying the load with continuous double-conversion power. Most UPS
installations are only loaded between 20-40%, but UPSs are not optimally
efficient when used at these lighter loads.
Existing method for increasing load percentage
The existing approach to capturing efficiency from low load levels
applied only to multi-UPS parallel systems. The system can increase
the effective load percentage by putting entire UPSs into idle. While
this helps improve efficiency slightly, it is limited to multi-UPS parallel
systems, and flexibility to adapt to the load can only be done in the large
steps of full UPS capacity.
The VMMS way
VMMS optimally employs UPMs to achieve higher efficiencies in doubleconversion mode in order to maximise the load level on remaining
active UPMs by setting UPMs that are not needed to ready state.* This
is calculated according to VMMS load threshold of the UPMs – 80% by
default – and the system configuration (redundancy requirements). This
results in maximised energy savings.
VMMS is possible thanks to Eaton Power Xpert 9395 UPS modularity,
and VMMS applies even in single-UPS systems. Upon a load increase
on critical bus, all ready state UPMs are able to react quickly and revert
to double-conversion mode in less than 2 ms by connecting the existing
PWM signals to the IGBT gates.
Extensive Configurability
Customers can decide how to configure their system
establishing the number of redundant UPMs and the
maximum load level per UPM.
VMMS can be used in single (multiple-UPM), and multi-UPS
Power Xpert 9395 systems
• Single 9395 units from 550 kVA to 1100 kVA
• Distributed parallel systems (Xx275, Xx550, Xx825, Xx1100)
• SBM centralised bypass system
Earlier installations can also be upgraded with VMMS
Applications
Applications where VMMS is particularly efficient:
• Redundant N+1 and 2N systems – Lightly loaded: <45% load level
• Critical data centres, especially when UPS feeds dual corded servers
• Any applications where load varies frequently
Availability
VMMS is available to all 9395 UPSs. All earlier made installations can be
upgraded with VMMS capability.
www.eaton.com/powerquality 1300 UPS UPS
11
Protecting your investment
Service
Only Eaton can offer you the support from our
factory-trained and certified service technicians
located near you.
Eaton Customer Service Engineers are supported
by a 24x7 dispatch arrangement, convenient
parts depots and a technical support team with
complete knowledge of Eaton products to give
you the confidence that your power protection
equipment is in the best hands.
Only Eaton is authorised to perform service using Eaton diagnostic
software to calibrate start-up, reset communications, and perform critical
service repairs. Service contracts are your best value compared to the
cost and risk of time and material.
Downtime and lost data are priceless. Please do not wait until there is an
emergency to realize the value of having a service contract.
Place your confidence with Eaton, a global leader with:
• A long history of technology leadership to give you the best protection
• The most complete line of hardware and software products to fit your
needs
• A world-class services organisation to provide you with peace of mind
program including all parts and labour, these programs offer support to
satisfy all your business requirements, options include business or after
hours support, on-site technical response within 2 or 4 hours, supported
24 hours 7 days a week , we also offer a customer service support number
and remote monitoring service to satisfy your on demand needs.
These programs can extend to 5 years and beyond so this gives you peace
of mind that your initial investment will be supported in the coming months
and years.
Please do not hesitate to contact your local sales representative to
discuss your service requirements.
We have a range of service contract offers, that start from a basic
preventative maintenance program and range to a comprehensive
Eaton Service Helpdesk
General Service Enquires
Emergencies - Three-phase products and Single-phase
greater than 6kVA
You can reach us by calling our 24 Hour Hotline
For emergencies you can call our 24 Hour Hotline
where a service technician can be dispatched
to attend site.
AUST 1300 303 059
NZ 0508 697 378
(Callout fees are reduced or do not apply depending on the service
contract level you hold with Eaton)
12
AUST - 1300 303 059
Hours: 8.30am to 6.00pm AEST on business days
Email: [email protected]
NZ - 0508 697 378
Hours: 8.30am to 5.00pm NZT on business days
Email: nzservice[email protected]
EATON CORPORATION UPS and Power Quality Products Catalogue
Protecting your investment
Installation: Eaton’s service engineers can help you set up and configure
your entire UPS, including its connections to your monitoring system and,
if desired, to remote monitoring system.
Commissioning: Our service engineers help you start up your UPS and
make sure it works as intended, performing all necessary checks before
turning the system over to you.
Preventative maintenance: Equipment cleaning, inspection of installation
and operation environment, mechanical inspection, measurements and
adjustments, battery condition check, system check, event log analysis,
necessary action and eventual repairs. Usually performed once a year,
unless otherwise agreed.
Reports: After each maintenance visit, whether regular or emergency, you
receive a full written report on the fault and steps undertaken to repair it.
24-hour telephone support: 24-hour, 365-days-a-year access to Eaton’s
support engineers for immediate help on your UPS system. Available free
of charge to all Service plan customers.
Extended warranty: For a small fee, you can extend the warranty of your
UPSs incrementally up to 5 years, for all single phase product range.
Power quality analysis: As time goes by, the loads on both your UPS
and the mains may change. Eaton’s service engineers can analyse the
quality of the power being fed to your equipment and suggest remedies if
necessary.
Battery analysis and replacement: Because batteries are the most
important part of a UPS, we pay particular attention to their condition. Only
rigorously tested, high-quality batteries are used in Eaton UPSs. Battery
life is optimised through our ABM® battery charging method. Eaton’s
service engineers keep your batteries as good as new, changing them
when necessary and disposing of the old batteries in an environmentally
sound fashion. When the batteries are changed, all cabling is also be
replaced to prevent problems through oxidisation. Finally, the battery
system is tested under normal operating conditions.
System upgrades: During maintenance visits, our service engineers
analyse the load and performance of your UPS and, if necessary, suggest
changes to accommodate new needs. You will never find yourself running
an obsolete or undersized system.
Extended Service Plans (ESP)
Extended Warranty and Service Plans for Eaton Single Phase UPS
Eaton’s Extended Service Plans (ESP) are a suite of warranty uplift and
enhanced service plans tailored to suit Eaton’s Single-Phase UPS portfolio
in most deployment applications. ESP provides cost effective & hassle free
extended warranty and service enhancements for Eaton’s single phase
UPS products for up to 4 years from date of purchase or commissioning.
Just set and forget when you purchase an ESP, as Eaton partners with
YOU, simplifying the post sales support process of your critical power
infrastructure. When you purchase an Eaton ESP product, a range of
additional support benefits are opened up to you including:
• Warranty extension
• Advance replacement
• Streamlined logistics
• Contract customer status & priority service
Strategically designed for the most critical of IT assets, our premier
level of cover (Warranty+ Premium) additionally includes start-up
commissioning plus an annual preventative maintenance visit for the
duration of the ESP.
ESP is an ideal customer care solution in today’s ALWAYS ON business
environment.
Eaton ESP overview
1. Warranty+ Standard
• Applicable for Eaton’s single phase UPS systems up to 11kVA.
• Available for 3rd or 4th year uplift
• Same business day dispatch, advance replacement*
• New unit delivered direct to the customer site nationally, Eaton covers
all logistics costs.
• Next Business Day Response onsite for hardwired single phase UPS
systems 3.1kVA - 11 kVA **
• Eaton to organise collection of the faulty unit for disposal (if required)***
• Access Eaton customer service centre 5x8
2. Warranty+ Premium
• Applicable for Eaton’s hardwired single phase UPS systems
3.1kVA - 11kVA.
• Available for 3rd or 4th year uplift
• Same business day dispatch, advance replacement *
• Next Business Day Response onsite**
• Startup / Commissioning (including basic UPS functionality operator
training) plus 1 x preventative maintenance visit with report per year
conducted during business hours ****
• Eaton to organise collection of the faulty unit for disposal
(if required) ***
• Access Eaton customer service centre 24 x 7
Spare parts: Entering an Eaton service agreement guarantees you the use
of only the best quality, factory-approved spare parts. Authorised Eaton’s
service representatives stock the most often needed spares, and their
stocks are quickly replenished from Eaton’s strategically located regional
logistics centres. The cost of spares is included in all Powertrust Service
Plan options.
On line Remote Service: Your UPSs can link directly to Eaton’s regional
Service Centre via the Web. Remote monitoring software residing on
Eaton’s computers will keep an eye on your UPS status, sounding an
alarm immediately if its monitored parameters are out of the ordinary. The
remote monitoring system can only link into your UPS. It has absolutely
no access to your business data. Alarms received are relayed by mobile
phone to Eaton’s duty engineer who takes action immediately. The remote
monitoring is an ideal enhancement to your service package. Ask your
Eaton representative for details.
Notes:
1.* Same business day dispatch of Eaton Single Phase UPS products up to 11kVA (excludes Eaton 9155 & MX Frame
UPS) with Advance Replacement and all logistics nationally.
• Softwired Eaton UPS < 3kVA is the customers responsibility to re-install.
• Hardwired Eaton UPS 3.1kVA - 11kVA (excludes Eaton 9155 & MX Frame UPS) replacement parts will be dispatched to
site in advance or taken with the Service technician at the next business day onsite response **.
• The cut off time for dispatch is 3:00 p.m. AEST/AESDT, Mon-Fri.
2.** Next Business Day response by Eaton Technician/Authorised Agent for hardwired Eaton UPS >3kVA (excludes
Eaton 9155 & MX Frame UPS) to attend to fault is only applicable for locations within 100kms of Eaton Service Locations
and/or Service Agents Nationwide. Additional travel charges apply for areas outside this range. Includes basic
disconnect/re-connect of UPS power tails as required. Please contact your Eaton Representative for travel charges
for a selected area.3.*** Disposal collection will take place during the time of delivery of a new unit or next business
day. Clients are to have Eaton products appropriately packaged and ready for collection to avoid additional transport
charges.
4.**** Initial Startup and Annual PM visits to be conducted during normal business hours and scheduled accordingly
upon request from the customer. Upon completion of the warranty registration, customers will receive an email
notification with our service center details requesting for scheduling to be made. Customers will also be advise for PM
visits to be scheduled within 8-9 months from date of installation.
5.All Eaton UPS systems must be installed and operated in accordance with manufacturers documented operating
procedures. Failure to adhere to these procedures may void warranties.
6.ESP registration can be done via the Eaton website at the “register a product (warranty)” portal. Registration will
be required within 30 days from date of ESP purchase. A confirmation email will be provided to the customer upon
registration, for further information and scheduling details where applicable.
COMING SOON
Site inspections: Consultative service that aims at securing the best
possible operational environment for your UPS to ensure its fault-free
operation.
Superior series 3 power protection for office and home computer equipment
Eaton 3S
• In the event of a total blackout, the unit provides sufficient battery
backup time to last through most power outages
• The 700VA model saves up to 30% energy through its EcoControl
function which automatically disables peripherals when the master
device, such as a computer, is turned off
• The 3S also protects telephone, broadband and Ethernet line from
“back door” power surges
• The shutdown software makes it possible to automatically save your
work and shut down your application without losing any data. Once the
power is restored, you can continue working exactly where you left off
Easy integration and installation
• Attractive design and glossy finish make the 3S a perfect fit for the
modern office environment
• The 3S comes with a fixed input cable and 6 Australian outlets for easy
connection of typical computer configurations with peripherals
• The 3S features a HID-compliant USB port (cable supplied), for
automatic integration with common operating systems (Windows/Mac
OS/Linux)
Technology:
Rating:
Voltage:
Backup time:
Configuration:
• Compact unit fits on or under your desk or can be mounted on a wall
Series 3 (Standby)
550 & 700VA
240Vac
Typical 5 min
Powerboard style
• Easy-to-replace battery helps to extend UPS service life
Ideal for protecting
• Computers and peripherals
Protection against power problems
• The Eaton 3S UPS helps to protect your computer equipment in case
of everyday events such as lightning strikes, storms, over-demand on
the utility grid, accidents, and natural disasters knocking out power
without warning
• Broadband modems (internet and TV)
• IP telephony equipment
• POS equipment
Eaton 3S Technical specifications
Rating (VA/W)
550VA / 330W
700VA / 420W
Model numbers
3S550AU
3S700AU
Output connection
3 x Aust 3 Pin 10A outlets with battery backup and surge protection + 3 x Aust. 3 Pin 10A outlets with surge protection
Characteristics
Input voltage
Up to 161-284 V (adjustable)
Output voltage
240 V (settable to 220 V, 230 V or 240 V)
Frequency
50-60 Hz autoselect
Input protection
Resettable circuit breaker
Features
ECO Control
No
Line protection
Tel/fax/modem/internet/Ethernet
Yes
Battery
Battery type
Compact, sealed lead-acid (replaceable)
Battery test
Yes
Yes
Cold start (no mains power)
Yes
Yes
Deep-discharge protection
Yes
Yes
Battery replacement indicator
LED
LED
Runtime at 50% load
10 min
9 min
Runtime at 70% load
6 min
6 min
Communication
Communications port HID-compliant USB port for automatic integration with most common operating systems. USB cable supplied
Standards compliance
Safety/EMC
IEC 62040-1, IEC 60950-1, IEC 62040-2, CB Report, CE mark, C-Tick, A-Tick
EMC
IEC 62040-2, C-Tick
Dimensions and weight
Dimensions H x W x D
86 x 140 x 335 mm
86 x 170 x 335 mm
Weight
2.9 kg
3.8 kg
Warranty
3 year limited warranty on UPS, 2 year limited warranty on battery and $25,000 Load Protection Guarantee.
Warranty+
Optional Warranty Uplifts
Battery run times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
14
EATON CORPORATION UPS and Power Quality Products Catalogue
Premier series 3 UPS with Advanced Surge Reduction
Eaton Ellipse ECO
Technology:
Rating:
Voltage:
Backup Time:
Configuration:
Series 3 (Standby)
1200 / 1600VA
230V
Typical 5 min
Rack/Tower
Ideal for protecting
• Computers and Peripherals
• Broadband Modems
• IP Telephony Equipment
• POS Equipment
Energy-efficient power protection for business computers
• With an efficient electrical design and the EcoControl function, which
automatically disables peripherals when the master device is turned
off, the Eaton Ellipse ECO helps you make energy savings of up to 30
per cent compared to previous-generation UPSs
• As well as providing a power supply backed up by a battery to keep
equipment operating during a power failure, the Ellipse ECO also
provides effective protection against damaging surges
• The Ellipse ECO includes a high performance surge-protection
device that complies with IEC 61643-1, this device also protects data
connections such as Ethernet, internet and telephone lines
Easy integration and installation
• The Ellipse ECO comes with eight IEC outlets (1200/1600 models). Two
IEC to IEC and two IEC to Aust 3 pin adaptor cables supplied
• The Ellipse ECO’s extra-flat design makes it easy to install in any office
environment: installation options include vertical box format, below the
desk, horizontally under a monitor, 19” rack-mounted (optional 2U kit)
and wall-mounted (optional kit)
• The Ellipse ECO is designed to be compatible with a wide variety of
different computer models. Eaton power management software is
delivered as standard (CD and USB cable supplied) and is compatible
with all major operating systems (Windows 7, Vista, XP, Linux and
Mac OS)
Complete peace of mind
• Periodic battery self-test ensures early detection of a battery that
needs to be replaced
• Easy-to-replace battery helps to extend UPS service life
• Push-button circuit breaker enables easy recovery from an overload or
short circuit
Eaton Ellipse ECO Technical specifications
Rating (VA/Watts)
1200VA / 750W
1600VA / 1000W
Model Numbers
EL1200USBIEC
EL1600USBIEC
Outlets with surge and backup / outlets with surge only
4 / 4 (IEC C13 10A)
4 / 4 (IEC C13 10A)
Cables
Input cable, 1 x IEC-IEC 10A output cable and 2 x IEC to Aust 3 Pin output adaptor cables included
Characteristics
Nominal Input Voltage
230V
Output Voltage
230V – Adjustable to 220 / 230 / 240
Frequency
50 – 60Hz (Autoselect)
Input Protection
Resettable Circuit Breaker
Features
ECO Control
Yes – up to 30% energy savings
Line Protection
Telephone/Fax/Modem/Internet/Ethernet
Battery
Battery Type
Replaceable Sealed Lead Acid
Cold Start
Yes
Deep Discharge Protection
Yes
Battery Replacement Indicators
LED and Audible
Runtime at 50% load
10 min
11 min
Runtime at 70% load
6 min
6 min
Communication
Communications port HID-compliant USB port for automatic integration with most common operating
systems. USB cable included.
Standards
Safety/EMC
IEC 62040-1, IEC 60950-1, IEC 62040-2, CB Report, CE mark, C-Tick, A-Tick
Surge Protection
IEC 61643-1
Dimensions (H x W x D)
305 x 81 x 312
305 x 81 x 312
Weight
6.7kg
7.8kg
Customer Service and Support
Warranty
3 year limited warranty on UPS, 2 year limited warranty on battery and $25,000 Load Protection
Guarantee
Warranty+
Optional Warranty Uplifts
Accessories
19" Rack Kit (ELRACK), Wall Mount Kit (ELWALL)
Battery run times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
www.eaton.com/powerquality 1300 UPS UPS
15
Essential series 5 Power Protection
Eaton 5E
Technology:
Rating:
Voltage:
Backup Time:
Configuration:
The 5E line interactive uninterruptible power system (UPS) provides
affordable power protection for your personal computers, home, office
and other electronic devices. While packed with valuable features such
as ANZ power receptacles and USB communications, the compact size
is ideal for limited office and home working spaces.
Features
• Automatic Voltage Regulation (AVR) stabilises fluctuating
power sources
• Microprocessor control design ensures high reliability
• Up to three ANZ receptacles, allowing easy equipment connection
• User replaceable batteries allow easy maintenance
• Start-on-battery provides portable power capability
• Eaton UPS Companion software monitors power conditions and
gracefully shuts down computer applications prior to battery depletion
• Intuitive LCD panel annunciates UPS status at a glance
Series 5 (Line Interactive)
650 / 850 / 1100 / 1500 / 2000VA
230V
Typical 5 min
Tower
Ideal for protecting
• Computers and Peripherals
• POS Equipment
650-850VA
1100-2000VA
5E Series Technical Specifications
Technology
Line Interactive (Automatic Voltage Regulation)
Rating, VA/Watts
650VA / 360W
850VA / 480W
1100VA / 660W
1500VA / 900W
2000VA / 1200W
Model Numbers
5E650IUSB-AU
5E850IUSB-AU
5E1100IUSB-AU
5E1500IUSB-AU
5E2000IUSB-AU
Characteristics - input/output
Input Voltage Window
170-280 Volts
Output Voltage on Battery
230V
Frequency
50/60Hz, auto detection
Output receptacles
2 x ANZ 3 pin 10A sockets
Input Connection
Fixed 1.5M 10A ANZ 3 pin input cord included
3 x ANZ 3 pin 10A sockets
Battery run time (minutes)
Typical backup times for 1 PC*
16
20
45
50
50
Typical backup times for 2 PC*
6
8
20
26
26
Typical backup times for 3 PC*
-
-
7
10
10
Typical backup times for 4 PC*
-
-
-
-
5
Start-On-Battery
Unit can be started without being connected to AC utility power, battery recharged is maintained even when UPS is off,
whilst connected to mains.
User Interface
Visual
1 On / Off Green LED button, AC mode = Steady on, Battery mode = flashing
Audible
Five audible alarms indicate operating modes; refer user manual
Communications / management
Power Management Software
Eaton UPS Companion power management software, downloadable via internet
Connection Type
1 x USB port to front panel
Approvals
CE Marking, C-Tick
Dimensions and weights
Dimensions (H x W x D)
148 x 100 x 288 mm
Weight
4.6 kg
Warranty
12 Months
Warranty+
Optional warranty uplifts
180 x 133 x 330 mm
5.1 kg
9.3 kg
*Battery run times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
16
EATON CORPORATION UPS and Power Quality Products Catalogue
10.5 kg
10.5 kg
Superior series 5 power protection for office servers
Eaton 5S
The Eaton 5S UPS provides effective power protection, even in disturbed
electrical environments. Voltage fluctuations are automatically corrected
using an AVR device (booster/fader), without needing the batteries.
The 5S not only provides a supply with battery backup to keep equipment
operating during power cuts, but also provides effective protection
against damaging surges.
The 5S protects networked equipment from back door power surges
coming through Ethernet, internet or telephone lines. The 5S s periodic
automatic battery testing ensures early detection if a battery needs to be
replaced. The easy-to-replace battery helps to extend the UPS service
life.
The 5S can be installed vertically over or under a desk, or horizontally
under a screen. Its compact, slimline form factor even allows it to be
easily integrated into environments with space constraints. The 5S
features an HID-compliant USB port, for automatic integration with
common operating systems (Windows/ Mac OS/Linux). The 5S is also
compatible with Eaton UPS Companion power management software. All
models come bundled with a USB cable for PC connection.
Reduce wasted energy consumption from standby power drain of
connected peripheral equipment with ECO Control function (850-1600VA
models)
Technology:
Series 5
(Line Interactive)
Rating:
550-1600VA
Voltage:
240 Vac
Backup time: Typical 4 min
Configuration: Tower
Ideal for protecting:
• Workstations
• Business Telephony
• Network devices
• Point-of-sale equipment
Eaton 5S Technical Specifications
Rating (VA/W)
550VA/330W
700VA/420W
850VA/510W
1200VA/750W
1600VA/1000W
9/5 min
9/5 min
Electrical Charecteristics
Technology
Technology Line-Interactive (AVR with Booster + Fader)
Input voltage range
175V-275V
Output voltage
240 V
Frequency
50-60 Hz autoselect
Connections
Number of AUS outlets
6
Outlets with surge protection
and battery backup / Outlets
with surge protection only
3/3
Batteries
Typical backup times at 50 and
70% load*
10/6 min
9/5 min
9/5 min
Battery management
Automatic battery test, deep-discharge protection, cold-start capable, replaceable batteries
Communication
User Interface
LED
Communication Port
HID-compliant USB port for automatic integration with most common operating systems (Windows Vista, 7 & 8, Linux, Mac OS X),
cable supplied
LCD
Data line protection
Tel/Fax/Modem/Internet and Ethernet
Standards
Safety & EMC
IEC/EN 62040-1, IEC/EN 62040 -2, CB Report, CE mark C-Tick
Dimensions and Weight
Dimensions H x W x D
250 x 87 x 260 mm
Weight
4.96kg
250 x 87 x 382 mm
5.98kg
6.50kg
9.48kg
11.08kg
Customer Service and Support
Warranty
2 years warranty including batteries
Part Numbers
550
700
850
1200
1600
5S
5S550AU
5S700AU
5S850AU
5S1200AU
5S1600AU
Battery run times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
www.eaton.com/powerquality 1300 UPS UPS
17
Superior series 5 performance
Eaton 5SC
Typical applications:
• Small office servers
• High-capacity PCs and workstations
Product highlights:
• Extends battery service life and provides advanced warning of the end
of useful battery life with ABM® Technology
• Delivers smooth, continuous power with pure sine wave output
• Regulates power fluctuations with Buck and Boost voltage regulation
• Hot swappable batteries
• LCD provides at-a-glance indication of status and important parameters
• Minimises downtime with hot-swappable batteries
• Communicates with Intelligent Power® Protector software via serial
and USB ports
• Provides investment protection with a two-year limited warranty
Technology:
Rating:
Voltage:
Backup time:
Configuration:
Series 5 (Line Interactive)
500-1500VA
230 Vac
Typical 5 min
Cabinet
Options:
• Extended warranty plans
The Eaton 5SC is designed to protect workstations, small servers, hubs,
routers, PCs, and other electronic equipment from power disturbances.
Ideally suited for small to medium-sized businesses, the 5SC UPS
features both USB and serial ports to facilitate software communication.
To prolong battery service life, the 5SC incorporates ABM® Technology,
which increases battery service life, optimises recharge time for quick
recovery after power outages, and provides advanced warning of the
end of useful battery life. In addition, incoming voltage fluctuations
are corrected so they do not affect the performance of connected
equipment.
Unlike other competitive UPSs in its class, which use a simulated sine
wave, the Eaton 5SC provides pure sine wave output during battery
operation. As a result, the connected load continues to receive a quality
electrical waveform and operates smoothly even during power outages.
To preserve data integrity, the 5SC is bundled with Intelligent Power®
Protector, which contains exclusive power management software
featuring extensive power monitoring and control capabilities. Backed
by superior performance, the 5SC UPS keeps your equipment up and
running without interruption.
18
EATON CORPORATION UPS and Power Quality Products Catalogue
Superior series 5 performance
Eaton 5SC Technical Specifications
Rating
500VA
750VA
1000VA
1500VA
Part number
5SC500i
5SC750i
5SC1000i
5SC1500i
Capacity (VA/Watts)
500/350
750/525
1000/700
1500/1050
Dimensions WxDxH (mm)
150x240x210
150x340x210
150x340x210
150x410x210
Weight (kg)
6.6
10.4
11.1
15.2
Input connection
IEC C14-10A
IEC C14-10A
IEC C14-10A
IEC C14-10A
Output connection
(4) IEC C13-10A
(6) IEC C13-10A
(8) IEC C13-10A
(8) IEC C13-10A
Typical runtime (Full load)
5 min
5 min
5 min
5 min
Operational
Nominal input voltage (Vac)
230 V
Input voltage range
184V-276V
Operating frequency
45 to 55 Hz (50 Hz system)
Input power factor
Same as load
Output voltage
230 Vac
Output voltage regulation
230V (+6/-10 %) (Adjustable to 220V / 230V / 240V), 50/60 Hz +/- 0.1 % (autosensing)
Overload capacity
120% 5 min; 150% 10 sec
Efficiency
up to 97%
User interface
LCD
LCD with Status, Alarms, Input/Output/Battery measurements
Standard communication ports
1 USB port + 1 serial RS232 & contacts port
Environmental
Operating temperature
0ºC to +35ºC
Storage temperature
-15ºC to +40ºC
Altitude
< 3000 m
Audible noise at 1 metre
< 40dBA
Certification
Markings
CE/GS/C-Tick
Safety
IEC 62040-1, CB Report (TUV)
EMC (Class B)
AS62040.2.2001
Battery Runtimes (in minutes)
Load
5SC500i
5SC750i
5SC1000i
5SC1500i
200VA/140W
16.5
25
37
85
300VA/210W
10.5
16.5
23
41
500VA/350W
5
10
13
22
750VA/525W
-
5
7.5
13
900VA/630W
-
-
6
10.5
1000VA/700W
-
-
5
9
1200VA/840W
-
-
-
7
1500VA/1000W
-
-
-
5
Battery run times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
www.eaton.com/powerquality 1300 UPS UPS
19
Premier high density series 5 protection for network devices
Eaton 5P
Technology:
Rating:
Voltage:
Backup time:
Configuration:
Series 5 (Line Interactive)
650-1550VA
230 Vac
5-10 minutes
Rack and Tower mount
Manageability
The graphical LCD display provides clear information on
the UPS s status and measurements on a single screen (in seven
languages). Enhanced configuration capabilities are also
available with easy-to-use navigation keys.
Meters energy consumption and provides kWh values
through the LCD and Intelligent Power® Software.
Load segment control enables prioritised shutdowns of
nonessential equipment to maximise battery runtime for critical
devices. Load segment control can also be used to remotely
reboot locked-up network equipment or to manage scheduled
shutdowns and sequential start-ups.
5P is available as a tower or rack form factor to cater for varied
deployment applications. Stronger, longer battery life: Eaton ABM®
battery management technology uses an innovative three-stage
charging technique that only recharges the battery when necessary,
so the battery experiences less corrosion and service life is prolonged
by up to 50%.
Batteries can be hot-swapped without ever having to shut down
connected equipment. With an optional, hot-swap maintenance
bypass module, you can even replace the entire UPS.
Advanced protection for:
• Servers
• Switches
• Routers
• Storage devices
The 5P offers Serial and USB connectivity, plus an extra slot for
an optional communication card (including SNMP/Web card or
relay contact card). Eaton s Intelligent Power ® Software Suite
compatible with all major OS including virtualization software
such as VMware and Hyper-V is included with each UPS.
Performance and Efficiency
With an optimised electrical design, the 5P can provide up to 98%
efficiency, contributing to lower cooling and utility costs.
When operating in battery mode the 5P provides a high quality output
signal for any sensitive equipment connected, such as active PFC
(power factor corrected) servers.
Availability and Flexibility
20
EATON CORPORATION UPS and Power Quality Products Catalogue
Premier high density series 5 protection for network devices
Eaton 5P 1550 tower and rack
1. Communications card slot
2. Remotely switchable outlet groups
3. Remote On/Off, Remote Power Off terminal
4. USB Port
5. Serial Port
6. Primary outlet group
Eaton 5P Technical Specifications
Rating (VA/W)
Format
Electrical characteristics
Technology
Input voltage and frequency
without using batteries
Output voltage and frequency
Connections
Input
Outputs
Remotely controlled sockets
650VA / 420W
Tower or 1U Rack
1150VA / 770W
1550VA / 1100W
Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
160V-294V (adjustable to 150V-294V) 47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system), 40 Hz in low-sensitivity mode
230 V (+6/-10 %) (Adjustable to 200V / 208V / 220V / 230V / 240V), 50/60 Hz +/- 0.1 % (autosensing)
Tower: Fixed line cord 10A
AU 1.8mtr Rack: IEC C14 (10A)
socket
Tower: 2 x AU 10A, 3 x IEC
Rack: 4 x IEC C13 (10A) C13
(10A)
Tower: 2 x 10A AU individually
switched
Rack: 2 x IEC C13 (10A)
individually switched
Batteries Typical backup times for 50 and 70% load*
5P
9/5.5 mins
Battery management
850VA / 600W
Tower: Fixed line cord 10A
AU 1.8mtr Rack: IEC C14 (10A)
socket
Tower: Fixed line cord 10A
AU 1.8mtr Rack: IEC C14 (10A)
socket
Tower: Fixed line cord 10A
AU 1.8mtr Rack: IEC C14 (10A)
socket
Tower: 2 x AU 10A, 3 x IEC C13
(10A) Rack: 4 x IEC C13 (10A)
Tower: 2 x AU 10A, 3 x IEC C13
(10A) Rack: 6 x IEC C13 (10A)
Tower: 2 x AU 10A, 3 x IEC C13
(10A) Rack: 6 x IEC C13 (10A)
Tower: 2 x 10A AU individually
switched
Tower: 2 x 10A AU individually
switched
Tower: 2 x 10A AU individually
switched
Rack: 2 x IEC C13 (10A)
individually switched
Rack: 2 x IEC C13 (10A)
individually switched
Rack: 2 x IEC C13 (10A)
individually switched
12/7.5 mins
12/7.5 mins
13/8.5 mins
ABM & Temperature compensated charging method (user selectable), Automatic battery test, deep discharge protection, to
automatic recognition of external battery units.
Interfaces
Communication ports
1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously) + 1 mini terminal block
for remote ON/OFF or Remote Power Off
Communications card slots
1 slot for NETWORK-MS, MODBUS-MS or RELAY-MS cards
Operating conditions, standards and approvals
Operating temperature
Models 650, 850 & 1550 = 0ºC to +35ºC, Model 1550 = 0ºC to +40ºC
Noise Level
< 40dBA
Performance - Safety - EMC
IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2 (EMC), IEC/EN 62040-3 (Performance), C-Tick
Approvals
CE, CB Report(TUV), C-Tick
Dimensions W x D x H / Weight
UPS Dimensions (mm) & weight
(kg)-Tower
150 x 345 x 230mm / 7.8kg
150 x 345 x 230mm / 10.4kg
150 x 345 x 230mm / 11.1kg
150 x 445 x 230mm / 15.6kg
UPS Dimensions (mm) & weight
(kg)-Rack
438 x 364 x 43.2mm(1RU) /
8.6kg
438 x 509 x 43.2mm(1RU) /
13.8kg
438 x 509 x 43.2mm(1RU) /
14.6kg
438 x 554 x 43.2mm(1RU) /
19.4kg
5P1150AU
5P1150iR
5P1550AU
5P1550iR
Customer Service & Support
Warranty
Part Numbers
5P Tower
5P Rack
3 years on electronics, 2 years on batteries
5P650AU
5P650iR
5P850AU
5P850iR
* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
www.eaton.com/powerquality 1300 UPS UPS
21
Superior series 5 protection for low density IT tower and rack applications
Eaton 5130
Technology:
Rating:
Voltage:
Configuration:
Series 5 (Line Interactive)
1250-3000 VA
230 Vac
Rack-mount/Tower convertible
Options:
• Extended Battery Modules for longer run times
• Mini Slot connectivity cards
• Extended warranty plans
The 5130 resolves outages, sags, surges, under-voltage and over-voltage
conditions - and supplies regulated power to all connected equipment.
This UPS is particularly well suited for protecting:
• IT and networking equipment, such as routers, switches, servers,
wireless devices, storage systems, security systems and PC/
workstation clusters
• Telecom equipment, such as PBXs, VoIP components and EDGE/3G/
WiMAX wireless networking equipment
The 5130 is value-priced, but it delivers features you would normally
expect to find in much higher priced systems, such as: load segment
control, hot-swappable battery modules, long battery runtime options,
multiple communication options, high output power factor and high
power density—all in a sleek, modern package.
Features:
• Protects connected equipment from five of the most common power
anomalies: failures, surges, sags, under-voltage and over-voltage
• Provides more real wattage in less space with a 0.9 power factor—to
protect more equipment and leave more room to expand IT systems
• Offers the choice of rack-mount or tower installation— with spacesaving 2U or 3U reduced-depth packages, including internal batteries
• Enables prioritised shutdown of non-essential equipment during
outages to maximise battery runtime for critical devices—with
PowerShare
• Maximises availability with extended battery runtime options, hotswappable batteries, optional maintenance bypass, remote monitoring
and power management software
22
EATON CORPORATION UPS and Power Quality Products Catalogue
Superior series 5 protection for low density IT tower and rack applications
Eaton 5130 Technical Specifications
Rating
1250VA
1750VA
2500VA
3000VA
3000VA
Part number
PW5130i1250-XL2U
PW5130i1750-XL2U
PW5130i2500XL2UAU
PW5130i3000XL2UAU
PW5130i3000XL3UAU
Capacity (VA/Watts)
1250/1150
1750/1600
2500/2250
3000/2700
3000/2700
Dimensions WxDxH(mm)
441x509x87 (2U)
441x509x87 (2U)
441x634x87 (2U)
441x634x87 (2U)
441x484x87 (3U)
Weight (kg)
24.3
26.6
33.8
33.8
34.3
Input connection
IEC C14-10A
IEC C14-10A
IEC C20-16A
IEC C20-16A
IEC C20-16A
Output connection
(8) IEC C13-10A
(8) IEC C13-10A
(1) IEC C19-16A
(8) IEC C13-10A
(1) IEC C19-16A
(8) IEC C13-10A
(1) IEC C19-16A
(8) IEC C13-10A
Operational
Nominal input voltage (Vac)
230 Vac (200/208/220/240 Selectable)
Input voltage range
160-294 Vac
Operating frequency
50/60 Hz auto sensing, tolerance 47-70Hz
Nominal output voltage
230 Vac (200/208/220/240 Selectable)
Output voltage range
230V +6%, -10%
User interface
LED
13 LED's: bar graph % load, battery charge level and various status and alarms
Standard communication ports
RS232 and USB as standard on all models
Optional
1 Mini Slot for Network Card-MS and Relay Card-MS connectivity cards
Environmental
Operating temperature
1250VA: 0ºC – +40ºC , 1750-3000VA: 0ºC – +35ºC
Storage temperature
-15ºC – +50ºC
Altitude
< 3000 m
Audible noise at 1 metre
< 45 dBA
Certification
Markings
C-Tick, CE, TUV
Safety
EN50091-1-1 and IEC60950
EMC
EN 50091-2
Battery Runtimes (in minutes)
Rack/Tower Models
Internal Batteries
+1 EBM
+2 EBMs
+3 EBMs
+4 EBMs
PW5130i1250-XL2U
15/5
58/30
100/55
144/80
185/104
PW5130i1750-XL2U
9/3
36/16
62/29
90/41
116/54
PW5130i2500-XL2U
11/3
55/23
100/42
150/63
206/85
PW5130i3000-XL2U
10/3
44/17
73/32
101/47
130/62
PW5130i3000-XL3U
10/3
44/17
73/32
101/47
130/6
Half Load/ Full Load
Battery Backup Times in minutes Half Load/ Full Load.
Run time chart provides typical information. Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.
www.eaton.com/powerquality 1300 UPS UPS
23
Premier efficient & manageable protection for high-end IT applications
Eaton 5PX
Availability and Flexibility
• The 5PX comes in a rack/tower convertible cabinet - pedestal and rail
kits are included with all models at no extra charge
• Stronger, longer battery life: Eaton ABM® battery management
technology uses an innovative three-stage charging technique that
only recharges the battery when necessary, so the battery experiences
less corrosion and service life is prolonged by up to 50%
• Batteries can be hot-swapped without ever having to shut down
connected equipment. With an optional, hot-swap maintenance bypass
module, you can even replace the entire UPS
• There is also the possibility to add more runtime with up to four
external hot-swappable battery modules, able to run systems for
hours if necessary. The additional battery modules are automatically
recognised by the UPS
Ideal for protecting
• Servers
• Switches
• Routers
Technology:
Rating:
Voltage:
Configuration:
Series 5 (Line Interactive)
1500-3000VA
230 Vac
Rack-mount/Tower convertible
• Storage devices
The Eaton 5PX provides exceptional efficiency, manageability and
metering capabilities for IT managers
Manageability
• The new graphical LCD display provides clear information on the UPS’s
status and measurements on a single screen (in seven languages).
Enhanced configuration capabilities are also available with easy-to-use
navigation keys
• For the first time in the industry the 5PX can meter energy consumption
right down to the managed outlet groups. kWh values can be monitored
using the LCD or Eaton’s Intelligent Power® Software Suite
• Load segment control enables prioritised shutdowns of nonessential
equipment to maximise battery runtime for critical devices. Load
segment control can also be used to remotely reboot locked-up
network equipment or to manage scheduled shutdowns and sequential
start-ups
• The 5PX offers Serial and USB connectivity, plus an extra Mini Slot for
an optional communication card (including SNMP/Web card or relay
contact card). Eaton’s Intelligent Power® Software Suite compatible
with all major OS including virtualisation software such as VMware and
Hyper-V is included with each UPS
Rack/Tower versatile
Performance and Efficiency
• With an optimised electrical design, the 5PX can provide up to 99%
efficiency, reducing cooling and utility costs
• With a power factor of 0.9, the 5PX delivers more real output power.
It powers more servers than other UPSs with equivalent VA ratings
and lower power factors. The 5PX is compatible with all modern IT
equipment
• When operating in battery mode the 5PX provides a high quality output
waveform for any sensitive equipment connected, such as active PFC
(power factor corrected) servers
24
EATON CORPORATION UPS and Power Quality Products Catalogue
Intuitive LCD display for ease
of configuration and management
Premier efficient & manageable protection for high-end IT applications
Eaton 5PX 3000i RT2U
Graphical LCD display :
- Clear information on UPS status and measurements
- Enhanced configuration capabilities
- Available in 7 languages
Panel for batteries replacement (Hot swappable)
1 USB port + 1 serial port + remote ON/OFF and remote
power OFF inputs
External battery (EBM) connector
8 IEC 10A + 1 IEC 16A sockets with energy metering
(including 4 programmable sockets)
Mini Slot for connectivity cards
Eaton 5PX Technical Specifications 1500
2000
2200
3000
Rating (VA/W)
1500VA / 1350W
2000VA / 1800W
2200VA / 1980W
3000VA / 2700W
Format
RT2U (rack / tower 2U)
RT2U (rack / tower 2U)
RT2U (rack / tower 2U)
RT2U & RT3U
Electrical characteristics
Technology
Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
Input voltage and frequency ranges
160V-294V (adjustable to 150V-294V) 47 to 70 Hz (50 Hz system),
without using batteries
56.5 to 70 Hz (60 Hz system), 40 Hz in low-sensitivity mode
Output voltage and frequency
230 V (+6/-10 %) (Adjustable to 200V / 208V / 220V / 230V / 240V), 50/60 Hz +/- 0.1 % (autosensing)
Connections
Input
1 IEC C14 (10 A) socket
1 IEC C14 (10 A) socket
1 IEC C20 (16 A) socket
1 IEC C20 (16 A) socket
Outputs
8 IEC C13 (10 A)
8 IEC C13 (10 A) sockets
8 IEC C13 (10 A) sockets,
1 IEC C19 (16 A) socket
8 IEC C13 (10 A) sockets,
1 IEC C19 (16 A) socket
Remotely controlled sockets
2 groups of 2 x IEC C13 (10 A)
Additional outputs with Hot Swap MBP
4 AUS 10A + 1 IEC 16A sockets or 6 IEC 10 A sockets or terminal blocks (HW version)
Additional outputs with FlexPDU
6 AUS 10A + 1 IEC 16A sockets or 12 IEC 10 A sockets
Batteries Typical backup times for 50 and 70% load*
5PX
19/11 mins
16/8 mins
15/8 mins
14/9 mins
5PX + 1 EBM
90/54 mins
66/39 mins
60/35 mins
66/38 mins
5PX + 4 EBM
285/180 mins
231/138 mins
210/125 mins
213/131 mins
Battery management
ABM® & Temperature compensated charging method (user selectable), Automatic battery test, deep discharge
protection, automatic recognition of external battery units
Interfaces
Communication ports
1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously)
+ 1 mini terminal block for remote ON/OFF and Remote Power Off
Communications card slots
1 Mini Slot for Network Card-MS, Relay Card-MS and Network & Modbus Card-MS connectivity cards
Operating conditions, standards and approvals
Operating temperature
0 to 40°C
Noise Level
< 45 dBA
Performance - Safety - EMC
IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2 (EMC), IEC/EN 62040-3 (Performance), C-Tick
< 45 dBA
< 45 dBA
Approvals
CE, CB report, TÜV
< 50 dBA
Dimensions W x D x H / Weight
UPS Dimensions (mm)
441 x 522 x 86.2 (2U) mm
441 x 522 x 86.2 (2U) mm
441 x 522 x 86.2 (2U) mm
441 x 647 x 86.2 (RT2U) mm
UPS Weight (kg)
27.6 kg
28.5 kg
28.5 kg
38.08 (RT2U), 37.33 (RT3U)
Dimensions of EBM
same as UPS
Weight of the EBM
32.8 kg
32.8 kg
32.8 kg
46.4kg (RT2U), 44.4kg
(RT3U)
441 x 497 x 130.7 (RT3U) mm
Customer Service & Support
Warranty
3 years on electronics, 2 years on batteries
* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
Part Numbers
1500
2000
2200
3000 (RT3U)
3000 (RT2U)
UPS
5PX1500iRT
5PX2000iRT
5PX2200iRT2UAU
5PX3000iRT3UAU
5PX3000iRT2UAU
EBM
5PXEBM48RT
5PXEBM48RT
5PXEBM48RT
5PXEBM72RT3U
5PXEBM72RT2U
www.eaton.com/powerquality 1300 UPS UPS
25
Essential series 9 Power Protection
Eaton E Series DX
Features
• Double conversion topology assures maximum reliability
• Wide input voltage range appropriate for the harshest
electrical environments
• Tested for generator compatibility
• Standard Models for fixed-run time performance
• XL Models for customised, long run-time applications,
with fast recharging
• Automatic bypass for fault-tolerance
• Built in maintenance bypass on 6-20kVA models
• Optional SNMP communications provides remote network
based monitoring
• Cold start on battery power allows portable power
• WINPOWER software monitors power conditions
• Intuitive front-panel LED user interface for consistent
status indication
• 6-20kVA models are parallelable for increased capacity
and/or redundancy
Options
Technology:
Rating:
Voltage:
Backup Time:
Configuration:
Series 9 (Double Conversion On Line)
1kVA – 20kVA
230/240V
Typical 5 min
Tower
• SNMP/Web Card
• Relay Card
• Modbus Card
• External Maintenance Bypass Switch
• Extended Battery Cabinets
The E Series® DX UPS double-conversion UPS affordably protects
mission critical applications from downtime, data loss and corruption.
The double-conversion architecture incorporates rectifier and inverter
stages to completely isolate the output power from all input anomalies.
By adapting to a wide range of input voltages, the E Series DX avoids
battery usage during minor power fluctuations, saving its capacity for
times when utility power is completely lost.
Ideal for protecting
• Computers and Peripherals
• POS Equipment
• PLC Systems
• Security Systems
3kVA rear panel
26
EATON CORPORATION UPS and Power Quality Products Catalogue
Essential series 9 Power Protection
Eaton E Series DX Technical specifications
Capacity (VA/Watts)
1000VA/700W
2000VA/1400W
3000VA/2100W
6kVA/4.2kW
10kVA/7kW
10kVA/7kW
15kVA/10.5kW
20kVA/14kW
N/A
N/A
EDX15KHXL31
EDX20KHXL31
Standard Model
(Internal Battery)
EDX1000HA
EDX2000HA
EDX3000HA
EDX6000HA
EDX10000HA
N/A
XL Model (Large Charger
+ External Battery)
N/A
N/A
EDX3000HXL
EDX6000HXL
EDX10KHXL
EDX10KHXL31
Input / Output
Nominal Input Voltage
220/230/240Vac 1 Phase (240V preset on "A" models, 230V on others)
Input Voltage Window
@ full load
160±5V – 296±5V at >80% load
Input Power Factor
>0.95
Frequency & Frequency
Range
50/60Hz; Tolerance (46/56 ±0.5) Hz Low, (54/64±0.5) Hz High
Nominal Output Voltage
220/230/240V (240V preset on "A" models, 230V on others)
Output Voltage on
Battery
220/230/240V (240V preset on "A" models, 230V on others)
Overload performance
108% ±5% to 150% ±5% for 30 secs
Input Connection
C14 10A
C14 10A
C20 16A
Hard Wired
Output receptacles
(4) IEC C13 10A
(6) IEC C13 10A
(4) IEC C13 10A
& Hard Wired
Hard Wired
Battery Quantity/Type
(Standard)
3 x 12V (7.2Ah)
8 x 12V (7.2Ah)
8 x 12V (7.2Ah)
20 x 12V
(7.2Ah)
Battery Quantity (XL)
3 x 12V
8 x 12V
8 x 12V
20 x 12V
Re-charge time to 90%
capacity
8 hours
Start-On-Battery
UPS can be started without being connected to AC utility power
380/400/415Vac 3 phase
176 - 276Vac (at full load)
0.98
0.95
105-130% for 10 mins, 130% for 1 sec, up to 130% continuous on bypass
Battery
20 x 12V (9Ah)
N/A
<7 hours
XL Models dependant on battery capacity
User Interface
Visual
LED mimic diagram with 4 x LEDs for Utility, Bypass, Inverter & Battery Status, 5 LED Bar Graph for Load and Battery Capacity, Fault LED
Control
Two buttons for On/Off and Test/Alarm Silence
Communications / management
Power Management
Software
WinPower power management software, included on CD
Connection Type
Standard RS232 (DB9)
Connectivity slot
Intelligent Slot for optional SNMP card / AS 400 Relay Card / Modbus Card
Environment
Operating Temperature
0ºC ~ 40ºC
Humidity
5-95% Non Condensing
Noise Level @ 1m
<50dBA
Standards
IEC61000-4-2 Level 4, IEC61000-4-3 Level 3, IEC61000-4-4 Level 4, IEC61000-4-4 Level 4, IEC62040-1, EN55022 Class B, CE Mark
<50dBA
<50dBA
<55dBA
Dimensions & Weights W x H x D mm
(Standard Models)
145 x 220 x 400
192 x 340 x 460
192 x 340 x 460
260 x 717 x 570
260 x 717 x 570
-
-
-
(XL Models)
-
-
192 x 340 x 460
260 x 717 x 570
260 x 717 x 570
260 x 717 x 570
260 x 717 x 570
260 x 717 x 570
Weight (Standard/
XL) kg
14
34.5
35.5 / 16
90 / 35
93 / 38
39
55
55
E Series DX internal battery models runtime chart
EDX1000HA
EDX2000HA
EDX3000HA
EDX6000HA
EDX10000HA
Battery Runtime 1/2 load
14 min
31 min
16 min
20 min
16 min
Battery Runtime Full load
7 min
11 min
>5 min
8 min
>5 min
Battery backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
www.eaton.com/powerquality 1300 UPS UPS
27
Superior series 9 protection for critical applications
Eaton EX
Eaton EX Rack/Tower versatility
Technology:
Rating:
Voltage:
Configuration:
Series 9, (Double Conversion On Line)
1000 - 3000VA
208–240Vac
Rack-mount/Tower convertible
Maximum availability
• Topology: double conversion on-line UPS with automatic
by-pass and power factor correction
• Powershare: the Eaton EX output sockets are individually controlled
to provide load-shedding to maximise the backup time and provide
remote reboot and sequential start-up as standard
• Continuous power supply: Hot swappable batteries.
The HotSwap MBP (Maintenance By-Pass) module allows the UPS to
be replaced without interrupting the power supply
• Long backup times: 1 to 4 EXB battery units can be added to the
Eaton EX. The Eaton EX 3000XL has a built-in super charger for extra
long backup times
Minimum total cost of ownership
• Easy operation: the LCD gives you access to a wide range of
measurements and set-up menus
• Remote supervision: the Eaton Intelligent Power® software suite
offers a wide range of communication option including: SNMP and
HTML, ModBus/JBus and relay outputs
28
EATON CORPORATION UPS and Power Quality Products Catalogue
Total flexibility
Eaton EX has unmatched Flexibility.
• Format: EX 1000 to 1500 are available in RT2U convertible rack/
tower format (compatible with short-depth rack). EX 2200 & 3000 are
available in RT2U format (optimised for rack mounting) or RT3U (for
tower or short-depth racks)
• Connections: with FlexPDU and HotSwap MBP, the RT2U and RT3U
models can be connected by sockets or terminal blocks. They can be
installed as required, on the side or on top of the unit
• Compatible with high power factor loads: Eaton EX is rated for 0.9
power factor (1000 VA/900 W, 1500 VA/1350 W, 2200 VA/1980 W and
3000 VA/2700 W)
• Communication: the EX includes both serial and USB ports,
plus remote On/Off connector and an extra slot for optional
communication cards
Ideal protection for:
• Servers, data storage and network equipment
• Telephony - VoIP
• Medical equipment - Industrial processes
Superior series 9 protection for critical applications
1 x USB port + 1 x serial port +
remote ON/OFF and emergency stop
inputs.
LCD Multilingual display
- 6 languages,
- displays measurements,
- displays alarms,
- access to control and set-up
menus.
EXB battery unit connector.
EXB units recognised automatically.
8 x IEC 10A sockets, including 4 x
Powershare programmable sockets
and 1 x IEC 16A socket.
Panel for batteries replacement
(Hot swappable)
Mini Slot connectivity card slot.
Mountings for HotSwap MBP and
FlexPDU.
Eaton EX
Eaton EX Technical Specifications
1000 RT2U
1500 RT2U
2200
3000 - 3000 XL
Rating (VA/W)
1000 VA / 900 W (1)
1500 VA / 1350 W (1)
2200 VA / 1980 W
3000 VA / 2700 W (1)
Format
RT2U (tower/rack 2U)
RT2U (tower / rack 2U) and RT3U (tower / rack 3U)
Electrical characteristics
Architecture
On-line double conversion with automatic by-pass and power factor correction
Input voltage and frequency ranges without using
100/120/140/160 V(2) to 284V - 40 to 70 Hz
batteries
Output voltage and frequency
100/120/160/184 V(2) to 284V - 40 to 70 Hz
230 V (adjustable to 200/208/220/240/250 V), 50/60 Hz autoselect or frequency converter mode (3)
230 V (adjustable to 200/208/220/240 V),
50/60 Hz auto-select or frequency converter mode
Input
1 x IEC C14 (10A) socket
1 x IEC C20 (16A) or terminal block on HotSwap
MBP HW (Hard-Wired)
Outputs
6 x IEC C13 (10A) sockets
8 x IEC C13 (10A) sockets + 1 x IEC C19 (16A) socket
Remotely controlled Powershare sockets
2 independent groups: 2 + 1 x IEC C13 (10A) sockets
2 groups of 2 x IEC C13 (10A) on Eaton EX
Additional outputs with HotSwap MBP
4 x Aust 3 pin or 6 x IEC 10A sockets or terminal blocks (HW version)
Additional outputs with FlexPDU
6 x Aust 3 pin or 12 x IEC 10A sockets
Connections
Battery
Typical backup times for 50 and 70% load (6) except for Eaton EX 3000 XL (5)
EX
18 min / 12 min
13 min / 9 min
17 min / 12 min
15 min / 10 min
EX + 1 EXB
75 min / 50 min
50 min / 35 min
85 min / 60 min
60 min / 40 min
EX + 4 EXB
250 min / 200 min
180 min / 120 min
285 min / 200 min
190 min / 150 min
Battery management
Automatic weekly test (period adjustable using LCD display or in software supplied), automatic recognition of external
battery units => continuous maximisation of backup time + deep discharge protection
Interfaces
Indicators and display
3 x LEDS + adjustable multilingual display: display of measurements, access to control and set-up menus
Communication ports
1 x USB port + 1 x RS232 serial port and relay contacts (4) + 1 x mini terminal block for remote ON/OFF and emergency stop
Communications card slots
1 x Mini Slot for Network Card-MS, Relay Card-MS or Network & Modbus Card-MS connectivity cards
Operating conditions, standards and approvals
Operating temperature noise level
0°C to 40°C continuous, 45 dBA
Performance - Safety - EMC
IEC/EN 62 040-3 (VFI-SS-113), IEC/EN 62 040-1-1, IEC/EN 60 950-1 (RD), IEC/EN 62 040-2 C1 Class
Approvals
CE, TüV GS, CB report, cTüV-US
CE, TüV, CB Report, UL
-
-
131 x 440 x 490 mm (7) / 30 kg (3000 XL = 18 kg)
86.5 x 438 x 483 mm / 27kg
CE, TüV, CB Report, UL
Dimensions (H x W x D) / Weight
EX RT3U
EX RT2U
86.5 x 438 x 483 mm / 25kg
EX EXB RT3U (excludes rack kit)
-
86 x 440 x 640 mm / 31 kg
131 x 440 x 490 mm(7) / 42kg
EX EXB RT2U
86.5 x 438 x 483 mm / 24.5 kg
-
-
Customer Service & Support
2 years warranty
Standard product exchange, including the battery
Warranty+
Optional 3-years warranty (depending on the country please visit www.eaton.com/powerquality)
1: Maximum rating with EXB battery units: Eaton EX 1000 = 800 W, Eaton EX 1500 =1200 W and Eaton EX 3000=2400W. 2: Lower limits for <20%, <33%, <66%, >=66% of nominal power (VA). For active
output power greater than 0.7 and 0.8 nominal rating, the lower limit is 180V and 190V respectively. 3: Derated by 15% when used as a frequency converter. 4: USB and RS232 serial ports cannot be used
simultaneously. 5: Except Eaton EX 3000 XL: UPS with high speed charger, without built-in batteries, for custom configurations: ask us for details. 6: Runtimes are shown at 0.7 power factor. Backup times are
approximate and may vary with equipment, configuration, battery age, temperature, etc. 7: compatible with 600 mm deep rack.
Part Numbers
1000
1500
2200
3000
EX RT3U (excludes rack kit)
-
-
M68400
M68402 - XL: M68404
EX RT2U (includes rack kit)
M68182
M68184
M68401
M68403
EX EXB
M68186 (includes rack kit)
M68186 (includes rack kit)
M68405
M68405
EX Rack Kit 2U/3U
-
-
M68441
M68441
www.eaton.com/powerquality 1300 UPS UPS
29
Premier series 9 Tower UPS for all critical applications
Eaton 9130 Tower
Product highlights:
• Offers premium performance with a 0.9 power factor and
95% efficiency
• Increases battery service life and system uptime with ABM® battery
charging technology
• Enables prolonged runtime of essential equipment during power
outages by allowing for orderly, remote shutdown of non-critical
systems or processes
• Ensures data and system integrity with Intelligent Power®
management software
Options:
• Extended Battery Modules for extended run time and Extended
Battery Cabinets for even longer run time
• External Battery Charger Unit for fast charging of long run time
Extended Battery Cabinets
• Hard wiring kits for fixed installations
• Interlocked Maintenance Bypass Switches
• Mini Slot connectivity cards
• Extended warranty plans
Technology:
Rating:
Voltage:
Configuration:
Series 9, (Double Conversion On Line)
700 - 6000VA
208–240Vac
Tower
The Eaton 9130 UPS, resolves utility power problems and delivers
superior power protection for IT and networking equipment, medical
systems, manufacturing process control — or anywhere critical
equipment and applications require clean, continuous power.
Double-conversion design for superior power protection The 9130
is constantly monitoring power conditions—regulating both voltage
and frequency. Even when presented with the most severe power
problems, this UPS’s output remains within two percent of nominal
voltage. With a wide input voltage range, the 9130 does not depend
on batteries to smooth out minor power fluctuations. Batteries are
conserved for those times when utility power is highly unstable or
completely out. If an outage occurs, the 9130 transfers to battery with
zero interruption in power, making this an ideal UPS for sensitive and
critical equipment.
More real power for less cost. High 0.9 output power factor enables
the 9130 to provide its full power capability to modern IT equipment
that may have a wide range of leading and lagging power factors. With
a 0.99 input power factor, this UPS avoids the disturbances that some
energy converters tend to cause.
Typical applications:
• Servers, networking gear
• Telecommunications, VoIP, security systems
• Medical systems
• Diagnostics and medical screening
• Patient record archives
• Manufacturing systems
• Chip fabrication
• Pharmaceutical production
• Chemical processing
30
EATON CORPORATION UPS and Power Quality Products Catalogue
Premier series 9 Tower UPS for all critical applications
Eaton 9130 Tower Technical Specifications
Rating
700VA
1000VA
1500VA
2000VA
3000VA
6000VA
Part number
PW9130G700T-XLAU
PW9130G1000T-XLAU
PW9130G1500T-XLAU
PW9130G2000T-XLAU
PW9130G3000T-XLAU
PW9130G6000T-XLAU
Capacity (VA/Watts)
700/630
1000/900
1500/1350
2000/1800
3000/2700
6000/5400
Dimensions WxDxH (mm)
160x355x250
160x383x250
160x435x250
214x410x345
214x410x345
242x542x575
Weight (kg)
12.2
14.5
19.0
34.5
34.5
75.5
Input connection
IEC C14-10A
IEC C14-10A
IEC C14-10A
IEC C14-10A
IEC C20-16A
Hard Wired
Output connection
(4) AUST 10A
(4) AUST 10A
(4) AUST 10A
(5) AUST 10A
(1) IEC C13-10A
(5) AUST 15A
(1) IEC C19-16A
Hard Wired
Operational
Nominal input voltage
(Vac)
240Vac (200/208/220/230 selectable)
Input voltage range
700-1500VA: 120/140/160-276 Vac (at 33%/66%/100% 0.7pf load)
2000-3000VA: 140/160/180-276 Vac (at 33%/66%/100% 0.7pf load)
6000VA: 120/140/160/180-276V (25%/50%/75%//100% 0.9pf Load)
Operating frequency
50/60 Hz auto sensing, tolerance 40-70Hz
Input power factor
0.99
Nominal output voltage
240Vac (200/208/220/230 selectable)
Output voltage regulation
+/-2%
Overload capacity
700-3000VA: Up to 130 % for 12 seconds, 130-150% for 2 sec
6000VA: Up to 130 % for 120 seconds, 130-150% for 30 sec
Efficiency
700-2000VA: 90% online, 93% High Efficiency Mode
3000VA: 91% online, 93% High Efficiency Mode
6000VA: 95% online, 98% High Efficiency Mode
User interface
LCD display
LCD display showing both UPS meters and UPS settings
LED
Four LEDs; UPS On, UPS on Battery, UPS on bypass, Alarm
Standard communication
ports
RS232 and USB as standard on all models
Optional
1 Mini Slot for Network Card-MS, Relay Card-MS or Network & Modbus Card-MS connectivity cards
Environmental
Operating temperature
0ºC – +40ºC
Storage temperature
-15ºC – +40ºC
Altitude
< 3000 m
Audible noise at 1 metre
700-3000VA: < 52 dBA, 6000VA: < 55 dBA
Certification
Markings
C-Tick, CE, GS
EMC
EN62040-2 Emissions, category C1; Immunity, category C2
Battery Runtimes (in minutes) Standard Extended Battery Modules
Load (VA/Watts)
% 0f Load
Internal Batteries
w/1 EBM
w/2 EBM
w/3 EBM
w/4 EBM
700/630
100%
5
N/A
N/A
N/A
N/A
350/315
50%
14
N/A
N/A
N/A
N/A
1000/900
100%
6
31
51
82
100
500/450
50%
19
68
111
192
246
1500/1350
100%
5
24
46
69
90
750/675
50%
14
61
112
172
221
2000/1800
100%
11
44
79
115
162
1000/900
50%
28
96
168
258
336
3000/2700
100%
6
21
51
66
93
1500/1350
50%
15
60
100
169
215
6000/5400
100%
6
33
64
96
130
3000/2700
50%
19
78
148
211
266
PW9130G700T
PW9130G1000T-XLAU
PW9130G1500T-XLAU
PW9130G2000T-XLAU
PW9130G3000T-XLAU
PW9130G6000T-XLAU
Run time chart provides typical information. Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.
Longer run times available with Extended Battery Cabinets. Please consult your sales representative for information.
www.eaton.com/powerquality 1300 UPS UPS
31
Premier series 9 protection for low density IT rack environments
Superior de-centralised power protection for medium to high density rack environments
Eaton
9130 Rack
Technology:
Rating:
Voltage:
Configuration:
Series 9, (Double Conversion On Line)
1000 - 3000VA
208–240Vac
Rack-mount
The newest Eaton addition, the Eaton 9130 UPS, resolves utility power
problems and delivers superior power protection for IT and networking
equipment, medical systems, manufacturing process control —
or anywhere critical equipment and applications require clean,
continuous power.
Double-conversion design for superior power protection The 9130 is
constantly monitoring power conditions—regulating both voltage and
frequency.
Even when presented with the most severe power problems, this UPS’s
output remains within three percent of nominal voltage. With a wide
input voltage range, the 9130 does not depend on batteries to smooth
out minor power fluctuations. Batteries are conserved for those times
when utility power is highly unstable or completely out. If an outage
occurs, the 9130 transfers to battery with zero interruption in power,
making this an ideal UPS for sensitive and critical equipment.
More real power for less cost. High 0.9 output power factor enables
the 9130 to provide its full power capability to modern IT equipment
that may have a wide range of leading and lagging power factors.
With a 0.99 input power factor, this UPS avoids the disturbances that
some energy converters tend to cause.
Typical applications:
• Servers, networking gear
• Telecommunications, VoIP, security systems
• Medical systems
• Diagnostics and medical screening
• Patient record archives
• Manufacturing systems
• Chip fabrication
• Pharmaceutical production
• Chemical processing
32
EATON CORPORATION UPS and Power Quality Products Catalogue
Product highlights:
• Offers premium performance with a 0.9 power factor and
95% efficiency
• Increases battery service life and system uptime with ABM® battery
charging technology
• Enables prolonged runtime of essential equipment during power
outages by allowing for orderly, remote shutdown of non-critical
systems or processes
• Ensures data and system integrity with Intelligent Power® software
Options:
• Extended Battery Modules for longer run times
• Mini Slot connectivity cards
• Extended warranty plans
Premier series 9 protection for low density IT rack environments
Eaton 9130 Rack Technical Specifications
Rating
1000VA
1500VA
2000VA
3000VA
Part number
PW9130G1000R-XL2UAU
PW9130G1500R-XL2UAU
PW9130G2000R-XL2UAU
PW9130G3000R-XL2UAU
Capacity (VA/Watts)
1000/900
1500/1350
2000/1800
3000/2700
Dimensions WxDxH(mm)
438x438x86.5 (2U)
438x438x86.5 (2U)
438x600x86.5 (2U)
438x600x86.5 (2U)
Weight (kg)
16.0
19.5
29.0
29.5
Input connection
IEC C14 10A
IEC C14 10A
IEC C14 10A
IEC C20 16A
Output connection
(2) AUST 10A
(4) IEC C13-10A
(2) AUST 10A
(4) IEC C13-10A
(4) AUST 10A
(4) IEC C13-10A
(4) IEC C13-10A
(3) AUST 10A
(1) IEC C19-15A
Operational
Nominal input voltage (Vac)
240Vac (200/208/220/230 selectable)
Input voltage range
700-1500VA: 120/140/160-276 Vac (at 33%/66%/100% 0.7pf load)
2000-3000VA: 140/160/180-276 Vac (at 33%/66%/100% 0.7pf load)
Operating frequency
50/60 Hz auto sensing, tolerance 40-70Hz
Input power factor
0.99
Nominal output voltage
240Vac (200/208/220/230 selectable)
Output voltage regulation
+/-2%
Overload capacity
Up to 130 % for 10 seconds, 130-150% for 2 sec
Efficiency
700-2000VA: 90% online, 93% High Efficiency Mode
3000VA: 91% online, 93% High Efficiency Mode
User interface
LCD display
LCD display showing both UPS meters and UPS settings
LED
Four LEDs; UPS On, UPS on Battery, UPS on bypass, Alarm
Standard communication ports
RS232 and USB as standard on all models
Optional
1 Mini Slot for Network Card-MS, Relay Card-MS or Network & Modbus Card-MS connectivity cards
Environmental
Operating temperature
0ºC – +40ºC
Storage temperature
-15ºC – +40ºC
Altitude
< 3000 m
Audible noise at 1 metre
< 52 dBA
Certification
Markings
C-Tick, CE, GS
EMC
EN62040-2 Emisions, category C1; Immunity, category C2
Battery Runtimes (in minutes) Standard Extended Battery Modules
Load (VA/Watts)
% 0f Load
Internal Batteries
w/1 EBM
w/2 EBM
w/3 EBM
w/4 EBM
1000/900
100%
6
31
51
82
100
500/450
50%
19
68
111
192
246
1500/1350
100%
5
24
46
69
90
750/675
50%
14
61
112
172
221
2000/1800
100%
6
33
59
88
119
1000/900
50%
17
72
129
183
260
3000/2700
100%
3
18
34
53
69
1500/1350
50%
9
45
84
122
165
PW9130G1000R-XL2UAU
PW9130G1500R-XL2UAU
PW9130G2000R-XL2UAU
PW9130G3000R-XL2UAU
www.eaton.com/powerquality 1300 UPS UPS
33
Premier series 9 protection for medium density rack environments
Eaton 9SX
Manageability
• The new graphical LCD provides clear information on the
UPS’s status and measurements on a single screen (in
seven languages). LCD display position can be adjusted to
offer the best viewable angle for tower and rack usage.
• The 9SX can meter energy consumption. kWh values can
be monitored using the LCD or Eaton’s Intelligent Power®
Software Suite.
• Load segment control enables prioritised shutdowns of
nonessential equipment to maximise battery runtime for
critical devices. It can also be used to remotely reboot
locked-up equipment or to manage scheduled shutdowns
and sequential start-ups.
• The 9SX offers Serial, USB and relay (4 dry contacts) connectivity,
plus an extra slot for an optional card (Modbus,
Network or Relay). 9SX also provides Remote Power off
function. Eaton’s Intelligent Power® Software Suite is included
with each UPS.
Product highlights:
Technology:
Rating:
Voltage:
Configuration:
Series 9 (Double Conversion On Line)
5-6kVA
230Vac (200-240Vac)
Rack-mount/Tower convertible
Performance and Efficiency
• Double conversion topology. The Eaton 9SX constantly
monitors power conditions and regulates voltage and frequency.
• With up to 94% efficiency in online double conversion mode
the 9SX provides the highest efficiency level in its class to
reduce energy & cooling costs.
• With a 0.9 power factor the 9SX delivers 28% more power
than UPS in its class. It powers more servers than other
UPSs with equivalent VA ratings and lower power factors.
Availability and Flexibility
• The internal bypass allows service continuity in case of
internal fault. Batteries are hot-swappable from the front
panel without powering down critical systems.
• With its rack/tower versatile form factor the 9SX can be
installed in any environment (rack kit provided as standard
on RT versions).
• Stronger, longer battery life: Eaton ABM® battery management
technology uses an innovative three-stage charging
technique that extends battery life by up to 50%.
• More runtime can be added with up to 12 external hot-swappable
battery modules, able to run systems for hours if necessary. The
additional battery modules are automatically recognised by the UPS.
34
EATON CORPORATION UPS and Power Quality Products Catalogue
• Provides clean, continuous power to protect critical equipment and
applications from power-related downtime, data loss, corruption,
and process interruption
• Saves valuable rack space by delivering up to 6000VA/5400W in
only 3U
• Provides deployment versatility by offering rack and tower
installation options with rail kits and pedestal provided
• Increases availability with hot-swappable batteries and power
module and an optional external maintenance bypass
• Offers extended battery runtime options to power essential
systems for more than an hour during an outage
• Simplifies UPS monitoring and management with a bright LCD user
interface and Intelligent Power ® Software Suite
Options:
• Mini Slot connectivity cards
• Extended battery modules, 3U high
• Extended warranty plans
Premier series 9 protection for medium density rack environments
Technical Specifications
5kVA
6kVA
Rating (kVA/kW)
5kVA/4.5kW
6kVA/5.4kW
Electrical Characteristics
Technology
On-line double conversion with Power Factor Correction (PFC) system
Nominal voltage
200/208/220/230/240V
Input voltage range
176-276V without derating (up to 100–276V with derating)
Output voltage/THDU
200/208/220/230/240V +/– 1%; THDU <2%
Input frequency range/THDI
40-70Hz, 50/60Hz autoselection, frequency converter as standard, THDI < 5%
Efficiency
Crest factor/short circuit current
3:1/90A
Overload capacity
102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 500ms
3:1/90A
Connections
Input
Terminal block (up to 10 mm²)
Outputs
Terminal block + 2 controlled groups of 4 IEC C13 (10A) + 2 IEC C19 (16A)
Batteries
Typical backup times at 50 and 70% load*
9SX
13/10 min
11/8 min
9SX + 1 EBM
60/40 min
48/34 min
9SX + 4 EBM
220/150 min
170/120 min
Battery management
ABM® and Temperature compensated charging method (user selectable), automatic battery test, deep discharge protection,
automatic recognition of external battery units.
Communication
Communication ports
1 USB port, 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 4 dry contacts (DB9), 1 mini terminal
block for remote On/Off and 1 for remote power Off.
Communication slot
1 slot for Network-MS card, ModBus-MS, Relay-MS, or Industrial Relay cards.
Operating conditions, standards and approvals
Operating temperature
0 to 40°C continuous
Noise level
<45dB
Safety
IEC/EN 62040-1, UL 1778, CSA 22.2
EMC, performance
IEC/EN 62040 -2 , FCC Class A, IEC/EN 62040-3 (Performance)
Approvals
CE, CB report (TUV), UL, C-Tick
<45dB
Dimensions H x W x D/Weight
UPS
440(19’’)*130(3U)*685mm/48kg
440(19’’)*130(3U)*685mm/48kg
EBM
440(19’’)*130(3U)*645mm/68kg
440(19’’)*130(3U)*645mm/68kg
Customer Service and Support
Warranty
2 years warranty
* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc
Part Numbers
9SX 5kVA
9SX 6kVA
UPS
–
–
UPS with Rack Kit
9SX5KiRT
9SX6KiRT
EBM
–
–
EBM with Rack Kit
9SXEBM180RT
9SXEBM180RT
Power Module
–
–
HotSwap Maintenance ByPass
MBP6Ki
MBP6Ki
Transformer Module
TFMR11Ki
TFMR11Ki
Supercharger with Rack Kit
–
–
1.8m Battery Connection Cable
EBMCBL180
EBMCBL180
Battery Integration System
BINTSYS
BINTSYS
www.eaton.com/powerquality 1300 UPS UPS
35
Premier series 9 power protection for medium to high density rack environments
Eaton 9PX
• The 9PX offers Serial, USB and relay connectivity, plus an
extra slot for an optional card (Ethernet Network, Voltage Free Contact
Relay, or Modbus & Network). Eaton’s Intelligent Power®
Software Suite compatible with all major OS including virtualisation
software such as VMware and Hyper-V is included
with each UPS.
Availability and Flexibility
• The internal bypass allows service continuity in case of internal fault,
a Maintenance Bypass Module is also available for easy UPS
replacement without interruption to the critical load” for easy
replacement of the UPS without powering down critical systems.
• The Eaton 9PX can be paralleled to achieve twice the power of unitary
product using Eaton’s proprietary Hot Sync® technology.
• Stronger, longer battery life: Eaton ABM® battery management
technology uses an innovative three-stage charging
technique that extends battery life by up to 50%.
• More run time can be added with up to 12 external hot swappable
battery modules, able to run systems for hours if
necessary. The additional battery modules are automatically
Technology:
Rating:
Voltage:
Backup time:
Configuration:
Series 9 (Double Conversion On line)
6-11 kVA
1ph/1ph in/out: 230 Vac (200-250 Vac)
3ph/1ph in/out: 380-415/220-240 Vac
5-240 minutes
Rack-mount/Tower Convertible
Performance and Efficiency
• Double conversion topology. The Eaton 9PX constantly monitors
power conditions and regulates voltage and frequency.
• With up to 95% efficiency in online double conversion mode
and 98% in high-efficiency mode the 9PX provides the
highest efficiency level in its class to reduce energy &
cooling costs.
• With a 0.9 power factor the 9PX delivers 28% more power
than other UPS in it’s class. It powers more servers than other
UPSs with equivalent VA ratings and lower power factors.
• With a RT (Rack/tower) versatile form factor the 9PX is the
most compact solution in its class delivering up to 5.4kW in
only 3U and 10kW in only 6U.
Manageability
• The new graphical LCD provides clear information on the
UPS’s status and measurements on a single screen (in
seven languages). LCD display position can be adjusted to
offer the best viewable angle for tower and rack usage.
• The 9PX can meter energy consumption. kWh values can
be monitored using the LCD or Eaton’s Intelligent Power®
Software Suite.
• Load segment control enables prioritised shutdowns of
non-essential equipment to maximise battery runtime for
critical devices. It can also be used to remotely reboot
locked-up network equipment or to manage scheduled shutdowns
and sequential start-ups.
36
EATON CORPORATION UPS and Power Quality Products Catalogue
recognised by the UPS.
Premier series 9 power protection for medium to high density rack environments
Technical Specifications
6kVA
8kVA
11kVA
Rating (kVA/kW)
6kVA/5.4kW
8kVA/7.2kW
11kVA/10kW
Electrical Characteristics
Technology
On-line double conversion with Power Factor Correction (PFC) system
Input voltage range
1:1 models: 176-276V without derating (up to 100–276V with derating)
3:1 models: 305V-480V without derating (up to 175V-480V with derating)
Output voltage/THDU
200/208/220/230/240V +/– 1%;
THDU <2% (1:1 & 3:1)
200/208/220/230/240/250V +/– 1%; THDU <2% (1:1 & 3:1)
Input frequency range/THDI
40-70Hz, 50/60Hz autoselection, frequency converter as standard, THDI < 5%
Efficiency
Up to 94% in Online mode, 98% in Hi-Efficiency
mode
Up to 95% in Online mode, 98% in Hi-Efficiency mode
Crest factor/short circuit current
3:1/90A
3:1/120A
Overload capacity
102–110% : 120s, 110–125%: 60s, 125–150%:
10s, >150%: 500ms
102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 900ms
Input 1:1 Models
Terminal block (up to 10 mm²)
Terminal block (up to 16mm²)
Input 3:1 Models
Terminal block (up to 16mm²)
Output 1:1 Models
Terminal block + 2 controlled groups of 4 IEC
C13 (10A) + 2 IEC C19 (16A)
Output 3:1 Models
Terminal block
Output with optional HotSwap Maintenance Bypass 1:1 Models
Terminal block + 3 IEC C13 (10A) + 2 IEC C19
(16A)
Output with optional HotSwap Maintenance Bypass 3:1 Models
Terminal block + 4 IEC C19 (16A)
3:1/150A
Connections
Terminal block
Terminal block + 4 IEC C19 (16A)
Batteries (1:1 Models)
Typical backup times at 50 and 70% load*
9PX (8 & 11 kVA = 1 Power Module + 1 EBM)
11/8 min
20/15 min
13/9min
9PX + 1 EBM (8 & 11 kVA = Total 2 EBM)
48/34 min
48/32 min
32/21 min
9PX + 4 EBM (8 & 11 kVA = Total 5 EBM)
170/120 min
140/100 min
100/70 min
9PX (6, 8 & 11kVA = 1 Power Module + 1 EBM)
30/20min
20/15 min
13/9min
9PX + 1EBM (total 2 EBM)
70/45min
48/32 min
32/21 min
9PX + 4 EBM (total 5 EBM)
210/140 min
140/100 min
100/70 min
ABM® and temperature compensated charging method (user selectable), automatic battery test, deep discharge protection, automatic
Batteries (3:1 Models)
Typical backup times at 50 and 70% load*
Battery management
recognition of external battery units.
Communication
Communication ports
1 USB port, 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 4 dry contacts (DB9), 1 mini terminal block for
remote On/Off and 1 for Remote Power Off, 1 DB15 for parallel operation.
Communication slot
1 slot for Network-MS card, ModBus-MS or Relay-MS cards.
Operating conditions, standards and approvals
Operating temperature
0 to 40°C continuous
Noise level
<45dB (1:1) / 48dB(3:1)
Safety
IEC/EN 62040-1, UL 1778 (1:1), CSA 22.2
EMC, performance
IEC/EN 62040 -2 , FCC Class A (1:1), IEC/EN 62040-3 (Performance)
Approvals
CE, CB report (TUV), UL (1:1), C-Tick
<48dB (1:1 & 3:1)
<50dB (1:1 & 3:1)
Dimensions H x W x D/Weight
UPS
440(19’’)*130(3U)*685mm/48kg (1:1)
440(19’’)*260(6U)*700mm/88kg (3:1)
440(19’’)*260(6U)*700mm/84kg (1:1)
440(19’’)*260(6U)*700mm/88kg (3:1)
440(19’’)*260(6U)*700mm/86kg (1:1)
440(19’’)*260(6U)*700mm/88kg (3:1)
EBM
440(19’’)*130(3U)*645mm/68kg (1:1)
440(19’’)*130(3U)*680mm/65kg (3:1)
440(19’’)*130(3U)*680mm/65kg
440(19’’)*130(3U)*680mm/65kg
Power module
440(19’’)*130(3U)*700mm/23kg (3:1 only)
440(19’’)*130(3U)*700mm/19kg (1:1)
440(19’’)*130(3U)*700mm/23kg (3:1)
440(19’’)*130(3U)*700mm/21kg (1:1)
440(19’’)*130(3U)*700mm/23kg (3:1)
Customer Service and Support
Warranty
3 years electronics, 2 years battery
* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc
Part Numbers
9PX 6kVA
9PX 8kVA
9PX 11kVA
UPS
1:1 = 9PX6Ki
–
–
Power Module
3:1 = 9PX6Ki31PM
1:1 = 9PX8KiPM, 3:1 = 9PX8Ki31PM
1:1 = 9PX11KiPM , 3:1 = 9PX11ki31PM
EBM
1:1 = 9PXEBM180, 3:1 = 9PXEBM240
9PXEBM240
9PXEBM240
HotSwap Maintenance Bypass
1:1 = MBP6Ki, 3:1 = MBP11Ki31
1:1 = MBP11Ki, 3:1 = MBP11Ki31
1:1 = MBP11Ki, 3:1 = MBP11Ki31
Transformer Module (Single Phase in/out)
TFMR11Ki
TFMR11Ki
TFMR11Ki
Supercharger with Rack Kit
1:1 = N/A, 3:1 = SC240RT
SC240RT
SC240RT
1.8m Battery Connection Cable
1:1 = EBMCBL180, 3:1 = EBMCBL240
EBMCBL240
EBMCBL240
Battery Integration System
BINTSYS
BINTSYS
BINTSYS
Rack Kit
9RK
9RK
9RK
www.eaton.com/powerquality 1300 UPS UPS
37
Premier series 9 protection for centralised mission critical loads
Eaton 9155
Product highlights:
• Hot Sync® redundancy
• ABM® providing up to 50% longer battery life time
• Active input power factor correction (PFC) providing 2-5%
THD(i) harmonics
• High 0.9 p.f. output rating for server and high computer loads
• Market leading internal battery runtime
• User friendly graphical LCD display with light blue back light
• Web/SNMP and ModBus monitoring capability
• Intelligent Power® Software Suite bundled
• In-built Maintenance Bypass Switch on 20-30kVA models,
optional on 8-15kVA models
Options
• System Parallel Cabinets for Hot Sync®
Capacity/Redundancy Solutions
• External Maintenance Bypass Switches
• Extended Battery Cabinets
• X Slot connectivity options
• ViewUPS-X remote monitoring panel
• Preventative maintenance contracts
Technology:
Rating:
Voltage:
Backup time:
Configuration:
Series 9 (Double Conversion On line)
8-30kVA
220-240/380-415 Vac, 50/60 Hz
Typical 5-33 min internal (extendable
up to several hours)
Cabinet
Eaton 9155 are Series 9 UPS designed to protect high 0.9 p.f. rated,
critical computers and servers. The centralised UPS protection is an
essential part of IT infrastructure in today’s IT, telecom, healthcare,
banking and industrial automation applications. The 9155 features
active input power factor control (PFC) and low 2-5% Total Harmonic
Distortion (current) with IGBT rectifier technology
The Eaton 9155 operate using the unique ABM® function. While
traditional UPS charges batteries continuously, ABM® charges
batteries only when necessary, thus preventing battery corrosion. The
exceptional ABM® function prolongs the service life of batteries by up
to 50%.
Typical applications:
• High-capacity computers
• Server rooms
• Networks
• Process automation, control equipment
• Telecommunication applications
• Offshore, military and special projects
38
EATON CORPORATION UPS and Power Quality Products Catalogue
Premier series 9 protection for centralised mission critical loads
Eaton 9155 Technical specifications
Rating
Model
8 kVA
9155-8-S
9155-8-N
10 kVA
9155-10-S
9155-10-N
12 kVA
9155-12-N
15 kVA
9155-15-N
20kVA
9155-20-N-MBS
30kVA
9155-30-N-MBS
Capacity (kVA/kilowatts)
8 / 7.2
10 / 9
12 / 10.8
15 / 13.5
20 / 18
30 / 27
Dimensions WxDxH (mm)
305x702x817
305x702x817
305x702x817
305x702x817
494x762x1684
494x762x1684
With extra runtime
305x702x1214
305x702x1214
305x702x1214
305x702x1214
-
-
70
70
70
70
200
200
165
165
165
300
N/A
270
270
270
400
400
N/A
N/A
N/A
500
500
N/A
N/A
N/A
600
600
Weight (kg)
UPS without batteries
UPS with internal 1xBAT
UPS with internal 2xBAT
UPS with internal 3xBAT
165
270
N/A
UPS with internal 4xBAT
N/A
Typical runtime UPS+1xBAT
15 min
10 min
8 min
5 min
5 min
N/A
UPS+2xBAT
33 min
25 min
20 min
15 min
13 min
7 min
Operational
Nominal input voltage (Vac)
S models: 220/230/240 Vac single phase;
N models: 220/380, 230/400, 240/415 Vac three phase
Input voltage range
175/305V - 276/478V at 100% load, 115/200V - 276/478V at 50% load
Operating frequency
50/60 Hz (45 to 65 Hz)
Input power factor
0.99 (5% THD)
Input current distortion
5% THD in normal network condition
Nominal output voltage
220/230/240VAC single phase
Output voltage regulation
±2% static;
±5% dynamic at 100% load change, < 1 ms response time
Overload capacity
150% for 5 sec / 125% for 1 min (online),
1000% for 20 msec (bypass)
Efficiency
92% with computer load; 93% with linear load
User interface
LCD-display
Graphical LCD with blue backlight, English, German and Spanish languages, extendable
LED
4 LED for notice and alarm
Standard communication
ports
1 x RS232 for local support, 2 x X-slot (empty);
1 x relay contact, 1 x emergency power off input, 2 x environmental input
Optional
External battery cabinets; isolation transformer;
external mechanical bypass switch; X-slot; Web/SNMP, Modbus/Jbus, Relay, Hot Sync® cards
Environmental
Operating temperature
0ºC to +40ºC
Storage temperature
-15ºC to +40ºC
Altitude
< 1000 m at +40ºC, < 3000 m at +25ºC
Audible noise at 1 metre
< 50dBA at 1 metre
Certification
Quality
ISO 9001; 2000 and ISO 14001:1996
Markings
CE and GOST markings / C-Tick
Safety
IEC 62040-1-1, IEC 60950, EN 62040-1-1
EMC
EN 50091-2 Class A, C-Tick
www.eaton.com/powerquality 1300 UPS UPS
39
Premier series 9 scalable UPS
Eaton MX Frame
Total flexibility
• Can be used as a free-standing tower unit with casters or 19”
rack-mounted: only 16U for Eaton MX Frame
• LCD multilingual display with mimic and LEDs for rapid view of the UPS
status, diagnostics and event log
• Outputs: IEC 10A and 16A outlet sockets and hardwired outputs.
• Built-in Powershare system for remote reboot of the equipment
connected, sequential start-up or load shedding while operating from
battery to maintain the power to critical loads
• Eaton MX Frame is compatible with three phase or single
phase supplies
• Backup time: 10 mins up to 2 hours by adding 3U battery
extension modules
Minimum total cost of ownership (TCO)
• More power with an output power factor of 0.9
• Eaton MX Frame is a modular system with 5 kVA sub-modules
paralleled to provide up to 20 kVA or 15 kVA with redundancy
Technology:
Rating:
Voltage:
Backup time:
Configuration:
Series 9 (Double Conversion On Line)
5-20kVA Scalable
220-240/380-415 Vac, 50/60 Hz
Typical 5-33 min internal (extendable
up to several hours)
Rack/Tower convertible
Advanced protection for:
• Departmental networks
• Server clusters
Pay as you grow - The system rating can be easily scaled in 5kVA
increments as your power requirements increase. The MX frame is
a modular system with 5kVA sub-modules paralleled to provide up to
20kVA or 15kVA with redundancy.
Continuous power supply
• Two front access hot-swappables sub-modules (power and battery) for
maintenance without load interruption
• Automatic battery test (test period can be set)
• Internal bypass built-in to supply the load even if the UPS fails
• Large input voltage and frequency ranges to avoid using the
batteries unnecessarily
40
EATON CORPORATION UPS and Power Quality Products Catalogue
Premier series 9 scalable UPS
Eaton MX Technical Specifications
MX Frame 15 000
MX Frame 20 000
Rating (kVA/kW)
15 kVA / 13.5 kW
20 kVA / 18 kW
15 kVA / 10 kVA + 5 kVA redundancy
5 kVA + 2 x 5 kVA redundancy
20 kVA / 15 kVA + 5 kVA redundancy
10 kVA + 2 x 5 kVA redundancy
Paralleling
Maximum rating / redundancy (1)
Inputs
Technology
VFI-SS-113, on-line double conversion with power factor correction, convection cooled static bypass switch
Number of phases, input connections
L + N or 3P + N, terminals up to 35 mm2, separate or common AC normal and AC bypass
Nominal voltage
200/208/220/230/240/250 V (L + N) or 380/400/415 V (3P + N)
Voltage range without using battery (2)
120 - 280 V (L + N), 250 - 465 V (3P + N)
Input frequency range, THDI
40-70 Hz, < 7%
Outputs
Output connections (3)
Terminals + 8 x IEC C13 (10A) + 4 IEC C19 (16A), sockets, except on -HWOP models
Remotely controlled Powershare sockets
2 groups (2 IEC C13 10A per group)
Output voltage and frequency (4), THDU, efficiency (5)
200/208/230/240 /250 V, 50 / 60 Hz autoselect, frequency converter as standard, < 2%, 97%
Backup time(6)
Eaton MX standard backup time
8 minutes
8 minutes
Eaton MX + EXB / MX + 2 EXB / MX + 3 EXB
35 min (3 EXB)/60 min (6 EXB)
/90 min (9 EXB) (7)
35 min (4 EXB)/60 min (8 EXB)
/90 min (12 EXB)
Communications
Slots
Ports
1 Mini Slot (MX) or 2 Mini Slot (MX Frame) for Network Card-MS, Relay Card-MS or Network & Modbus Card-MS
connectivity cards
Remote Power off (RJ11), 5 output contacts (DB9), setup via Solution-Pac (8) , (USB and DB9-serial ports), EXB detection (RJ45),
paralleling (DB 15)
Operating conditions, standards and approvals
Performance, safety, EMC, surge protection
IEC/EN 62 040-3, IEC/EN 62 040-1-1, IEC/EN 62 040-2 class A (class B as option), 4 kV IEC 61 643, UL 1778 and CSA 22.2 (9)
Operating temperature, noise, approvals, guarantee
0°C to 40°C continuous, 45 dbA (10), UL, TüV, GS mark, CB, C-Tick, CE, IEC 61 931, one year (11)
Dimensions H x W x D / Weight
Eaton MX standard backup tower
Tower 690 mm high (795 mm casters) x 444.5 mm wide x 735 mm deep / 250 kg
Eaton MX standard backup rack
Rack 16U x 444.5 mm wide, compatible with 800-1000 mm deep rack
Eaton MX EXB battery unit tower / rack
Dimensions same as MX Frame / 194 kg for 15 kVA, 239 kg for 20 kVA
Customer Service & Support
Warranty
2 year warranty, including batteries.
1: Eaton MXs can be paralleled using ModularEasy. 2: At 70% load. 3: 4 IEC C13 (10A) 2 m long cables for use with retention clips (8 cables for use with Eaton MX Frame). 4: Frequency conversion for non-paralleled units only.
5: Economy mode, 91% in normal mode. 6: At 70% nominal rating with power factor 0.7 typical values after 3 charge/discharge cycles, with 3-5 years old batteries. Weekly battery test without interrupting the load (daily or monthly if
required). EXB compatible with 0.8 power factor loads. 7: With Eaton MX Frame EXB (4 battery units). 8: Solution-Pac CD-ROM supplied as standard. 9: Applicable to US models. 10: 50 dbA above 5 kVA. 11: Depending on the country,
see www.eaton.com/powerquality.
Part Numbers
MX Frame 15 000
MX Frame 20 000
Eaton MX Tower or rack-mounting: standard backup time
MXF15KC05
MXF20KC05
Eaton MX EXB: battery extension module
M87103
Eaton MX / EXB Rack Kit: rail kit for 19” rack mounting
M68002
MX 1,8 m Battery extension cable
M68528
M68528
MX Battery / Power electronics sub-module
M68524 / M68523
M68524 / M68523
Eaton MX Frame empty chassis
M68526
M68526
Battery Integration System (up to 9 EXB)
M68527
M68527
1: (with rack kit, casters, NMC card) MXF15KC05 = M68526 (empty Eaton MX Frame) + 3 x M68524 + 3 x M68523. 2: (with rack kit, casters, NMC card) MXF20KC05 = M68526 (empty Eaton MX Frame) + 4 x M68524 + 4 x M68523.
www.eaton.com/powerquality 1300 UPS UPS
41
Essential 3 Phase protection for IT and Industrial applications
Eaton E Series DX
Typical applications
• Computers and Peripherals
• POS Equipment
• PLC Systems
• Security Systems
Features
• On-line double conversion topology assures maximum reliability
• High Frequency technology allows a compact design that delivers
perfect sine wave output.
• Intuitive front-panel LCD user interface for consistent status indication
• 0.8 Power Factor output
• Internal battery option for short run times
• Tested for generator compatibility
• Automatic bypass for fault-tolerance
• Built in maintenance bypass switch
• Parallelable for N+X capacity & redundancy
• WINPOWER software monitors power conditions
Options
• SNMP/Web Card
• Modbus Card
• External Maintenance Bypass Switch
Technology:
Rating:
Voltage:
Backup Time:
Configuration:
Series 9 (Double Conversion On Line)
20kVA – 40kVA
380-415 Vac, 50/60Hz
Typical 5-14 min internal (extendable up
to several hours)
Tower
• Extended Battery Cabinets
The Eaton® E Series DX is a three-phase, double conversion
uninterruptible power supply (UPS), and is available in 20, 30 and 40kVA
output power ratings. Its design fits perfectly to any environment where
uninterrupted power feed is required to secure critical equipment’s
continuous operation. The E Series DX UPS provides a perfect solution
for power protection, and solves power quality problems such as surges,
spikes, voltage fluctuations, harmonic distortion, clutter interference and
frequency fluctuations.
With E series DX, each phase is independently double converted and
regulated. In addition a PFC (power factor control) controller is used for
real time control and data processing, ensuring high availability at all
times. Further reliability is accomplished by introducing an intelligent
charge mode which significantly prolongs service life of batteries. Also,
the possibility to have dual feed on UPS input adds availability and
increases reliability of the system.
As an added benefit, IP21 compliant design makes E Series DX a perfect
fit for industrial and other applications, with harsh environmental
conditions. An optional filter is also available for further protection
against the smallest damaging particles.
42
EATON CORPORATION UPS and Power Quality Products Catalogue
Essential 3 Phase protection for IT and Industrial applications
Description
kVA
Standard models with
space for internal
batteries
20
Eaton E Series DX 20 kVA B
EDX20K4EB, EDX20K4AUB
120
420 x 710 x 1245
30
Eaton E Series DX 30 kVA B
EDX30K4EB, EDX30K4AUB
195
470 x 710 x 1753
40
Eaton E Series DX 40 kVA B
EDX40K4EB, EDX40K4AUB
195
470 x 710 x 1753
Standard models with
internal batteries
installed
Model description
Part number
Net weight (kg)
Dimensions (WxDxH mm)
20
Eaton E Series DX 20 kVA BI
EDX20K4EBI, EDX20K4AUBI
272
420 x 710 x 1245
30
Eaton E Series DX 30 kVA BI
EDX30K4EBI, EDX30K4AUBI
515
470 x 710 x 1753
40
Eaton E Series DX 40 kVA BI
EDX40K4EBI, EDX40K4AUBI
515
470 x 710 x 1753
Eaton E Series DX 3 Phase Technical specifications
Input
Nominal Voltage
Operating environment
380/400/415 Vac (L-L)
Temperature
0°C to 40°C
220/230/240 Vac (L-N)
Humidity
20% to 90% non-condensing
Frequency
40-65 Hz (self-adaptive to 50 Hz and 60 Hz)
Efficiency
Wiring
3-Phase + N + PE
Line mode
92%
THD i
<5%
HE mode (high
efficiency)
98%
Power factor
>0.99
Display
Dual-line input
Supported
LCD
UPS status and operating instructions. Input voltage,
output voltage, current, frequency, charger voltage and
current, fault and warning display.
LED
UPS operation status
Battery
Type
Maintenance free VRLA batteries
Backup time
Up to 15 min with internal batteries on 20-40kVA, more
with external batteries
Battery Voltage
360 V (30x12 V, 180 cells), 20kVA
384 V (32x12 V, 192 cells), all other models
Warning equipment
Buzzer alarm and light double LED
Communication interface
Output
Voltage
380/400/415 Vac (L-L) 220/230/240 Vac (L-N)
Frequency
50/60 Hz
Phase
Three-phase four wire + ground
Power factor
0.8
Overload capability
125% 10 minutes, 150% 1 minute
RS-232, AS/400, RS485, service, EPO, interface for
battery temperature sensor, intelligent communications
slot
Runtime for 20-40kVA UPS with internal batteries p.f. 0.7 (typical IT server/computer load)
Battery
Qty
20
30
40
kVA
7 Ah 12 V
2 x 30
6
–
–
min
9 Ah 12 V
2 x 30
10
–
–
min
7 Ah 12 V
3 x 32
–
6
–
min
9 Ah 12 V
3 x 32
–
10
–
min
7 Ah 12 V
4 x 32
–
11
6
min
9 Ah 12 V
4 x 32
–
15
10
min
Run time chart provides typical information. Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.
www.eaton.com/powerquality 1300 UPS UPS
43
Premier Three-phase UPS for servers and industrial applications
Eaton 9355
Product highlights:
• Hot Sync® redundancy
• ABM® providing up to 50% longer battery life time
• Active input power factor correction (PFC) providing 2-5%
THD(i) harmonics
• High 0.9 p.f. output rating for server and high computer loads
• Market leading internal battery runtime
• User friendly graphical LCD display with light blue back light
• Web/SNMP and ModBus monitoring capability
• Intelligent Power® Software Suite bundled
• In-built Maintenance Bypass Switch on 20-40kVA models,
optional on 8-15kVA models
Options:
• System Parallel Cabinets for Hot Sync®
Capacity/Redundancy Solutions
• "UPS Centre" distribution cabinets for small computer room
applications
• External Maintenance Bypass Switches
• Extended Battery Cabinets
• X Slot connectivity options
• ViewUPS-X remote monitoring panel
• Preventative maintenance contracts
Technology:
Rating:
Voltage:
Backup time:
Configuration:
Series 9 (Double Conversion On Line)
8-40 kVA
380-415 Vac, 50/60 Hz
Typical 5-33 min internal (extendable
up to several hours)
Cabinet
Eaton 9355 are Series 9 UPS designed to protect high 0.9 p.f. rated,
critical computers and servers. The centralised UPS protection is an
essential part of IT infrastructure in today’s IT, telecom, healthcare,
banking and industrial automation applications. The 9355 features
active input power factor control (PFC) and low 2-5% Total Harmonic
Distortion (current) with IGBT rectifier technology.
The 9355 operate using the unique ABM® function. While traditional
UPS charges batteries continuously, ABM® charges batteries only
when necessary, thus preventing battery corrosion. The exceptional
ABM® function prolongs the service life of batteries by up to 50%.
Typical applications:
• High-capacity computers
• Server rooms
• Networks
• Process automation, control equipment
• Telecommunication applications
• Offshore, military and special projects
44
EATON CORPORATION UPS and Power Quality Products Catalogue
Premier Three-phase UPS for servers and industrial applications
Eaton 9355 Technical Specifications
Rating
8kVA
10kVA
12kVA
15kVA
20kVA
30kVA
40kVA
Model
9355-8-N
9355-10-N
9355-12-N
9355-15-N
9355-20-N-MBS
9355-30-N-MBS
9355-40-N-MBS
Capacity (kVA/kilowatts)
8 / 7.2
10 / 9
12 / 10.8
15 / 13.5
20 / 18
30 / 27
40 / 36
Dimensions (mm) WxDxH
305 x 702 x 817
494 x 762 x 1684
With extra runtime
305 x 702 x 1214
-
Weight (kg)
UPS without batteries
UPS with internal 1xBAT
UPS with internal 2xBAT
UPS with internal 3xBAT
UPS with internal 4xBAT
75
165
N/A
N/A
75
165
275
N/A
N/A
75
165
275
N/A
N/A
75
165
275
N/A
N/A
200
300
400
500
600
200
N/A
400
500
600
217
N/A
N/A
517
617
Input Connection
Hardwired
Hardwired
Hardwired
Hardwired
Hardwired
Hardwired
Hardwired
Output Connection
Hardwired
Hardwired
Hardwired
Hardwired
Hardwired
Hardwired
Hardwired
*Typical runtime with 1xBAT
Typical runtime with 2xBAT
Typical runtime with 3xBAT
Typical runtime with 4xBAT
15 min
33 min
N/A
N/A
10 min
25 min
N/A
N/A
8 min
20 min
N/A
N/A
5 min
15 min
N/A
N/A
5 min
13 min
22 min
31 min
N/A
7 min
13 min
20 min
N/A
N/A
8 min
12 min
Operational
Nominal input voltage (Vac)
220/380, 230/400, 240/415 Vac three phase
Input voltage range
175/305V - 276/478V at 100% load, 115/200V - 276/478V at 50% load
Operating frequency
50/60 Hz (45 to 65 Hz)
Input power factor
0.99
Input current distortion
5% THD in normal network condition
Nominal output voltage
380/400/415 three phase
Output voltage regulation
2% static;
5% dynamic at 100% load change, < 1 ms response time
Overload capacity
150% for 5 sec / 125% for 1 min (online),
1000% for 5 msec (bypass)
Efficiency
92% with computer load; 93% with linear load
User interface
LCD-display
Graphical LCD with blue backlight, English, German and Spanish languages, extendable
LED
4 LED for notice and alarm
Standard communication ports
1 x RS232 for local support, 2 x X-Slot (empty);
1 x relay contact, 1 x emergency power off input, 2 x environmental input
Optional
External battery cabinets; isolation transformer; external mechanical bypass switch; X-Slot;
Web/SNMP, Modbus/Jbus, relay card, RS232 port, Hot Sync® card
Environmental
Operating temperature
0oC to +40oC
Storage temperature
-15oC to +40oC
Altitude
< 1000 m at +40oC, < 3000 m at +25oC
Audible noise at 1 metre
< 50dBA at 1 metre
Certification
Quality
ISO 9001; 2000 and ISO 14001: 1996
Markings
CE and GOST markings / C-Tick
Safety
IEC 62040-1-1, IEC 60950, EN 62040-1-1
EMC
EN 50091-2 Class A, C-Tick
www.eaton.com/powerquality 1300 UPS UPS
45
Premier Rack Mount 3 Phase UPS for Data Centre & IT Applications
Eaton BladeUPS™
Typical applications:
• Data centres with rack mount blade servers
• Telecommunications
Product highlights:
• Minimum efficiency of >98% in normal operation
• Easy to install, configure and deploy
• Fits into standard 19" rack cabinets
• Hot-swappable battery and electronics modules
• Parallel for capacity/redundancy
• Hot Sync® redundancy
• Decentralised bypass ensures no single failure point
• ABM® prolongs battery life by up to 50%
Options:
• X Slot connectivity options
Technology:
Rating:
Voltage:
Backup time:
Configuration:
Double Conversion On Line, On Demand
12 to 60 kW N+1 using 12 kW modules
400 Vac, 50/60 Hz
5 minutes typical, extendable
Rack-mount
• Power Xpert® software
Eaton BladeUPS is the first product on the market to offer a "Online,
Double Conversion On Demand" power technology. This innovative
design takes into consideration the design capabilities of the actual
computer power supplies in such a manner that the UPS furthers
that capability in order to provide an extremely efficient and robust
protection solution without generating additional heat.
The BladeUPS is a rack-mounted three-phase input and three-phase
output uninterruptible power system. Each 12kW module can be
paralleled to achieve a maximum 60 kW N+1 system. Paralleling can be
accomplished for either redundancy or capacity purposes. Each 12 kW
module is identical and can be converted from a single stand alone UPS
to a system capable of being paralleled by simply changing the power
cord. The BladeUPS is designed for computer data centre installations.
Paralleling of the BladeUPS modules takes place in the BladeUPS bar,
which is mounted separately in the rear of the IT rack. This bar provides
the required input and output power connections for 4 or 6 BladeUPS
modules. Each BladeUPS bar comes equipped with fully rated input and
output lugs within a designated wiring area. The protected load can be
connected to the wiring section, or distributed output can be taken in
12 kW increments from the locking output connector on the rear of the
BladeUPS module.
A single BladeUPS module can be connected to the BladeUPS bar, with
additional modules installed to meet future power demands.
™
46
EATON CORPORATION UPS and Power Quality Products Catalogue
Premier Rack Mount 3 Phase UPS for Data Centre & IT Applications
BladeUPS - Scalability
Meet current and changing requirements with modular architecture
The building block of the Eaton BladeUPS system is a 6U rack-mount
module that provides 12 kW of backup power protection. The system
expands easily to provide maximum results. As your data centre
grows, the system’s modularity plays a key role in optimising your
capital planning and deployment. Using the patented and field-proven
Hot Sync® paralleling technology, up to six BladeUPS modules can
be paralleled for extra capacity or redundancy, providing 60 kW of
redundant backup power protection in one 19 inch rack.
YEAR 1:
Patented load-sharing control intelligently distributes the workload
among modules without requiring direct synchronisation links among
them. Any module can provide backup support for any other, with no
interruption or downtime. For instance, in a redundant system you could
perform full maintenance on any module without any interruption of
conditioned power to the protected IT equipment.
YEAR 3:
INITIAL INSTALL
YEAR 5:
EXPANSION
FURTHER EXPANSION
BladeUPS
Redundant N+1 configuration:
Parallel Bar for
Six 12 kW UPS modules share
paralleling UPS
the load equally. If a UPS
modules
module is removed from
service, the remaining
modules seamlessly support
the load without interruption.
42U Eaton
Enclosure
Three 12 kW UPS
modules = 36 kW
Total Rack
of backup power
Space: 24U
12 kW
6U electrical
Eaton
wire-way
BladeUPS occupies
6U of space
12kW
36kW or 24kW, N+1
60kW, N+1
* Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc. Runtimes at 0.7 pf.
www.eaton.com/powerquality 1300 UPS UPS
47
Essential protection for Data Centre and Industrial applications
Eaton 93E
True reliability
Patented Eaton Hot Sync® technology makes it possible to
parallel up to four UPSs to increase availability or add capacity.
The technology enables load sharing without any communication
line, thus eliminating single point of failure.
Compact & serviceable design
Small footprint occupies minimal floor space:
• Up to 35% smaller than similar competitive solutions
• 600mm wide UPS cabinet (80-200kVA models) enables seamless
in-row” integration with IT racks
The 93E is easily and quickly serviced to provide the highest
level of availability with Mean Time to Repair (MTTR) <30
minutes. With its Easy Capacity Test feature the 93E can test its entire
power train under full load stress without the requirement of
an external load.
User Interface
Large LCD graphically displays UPS status and offers easy access to
measurements, controls and settings.
Connectivity
With Eaton® Mini-Slot connectivity cards, you can monitor, manage
and remotely shutdown UPSs across the network.
Technology:
Rating:
Voltage:
Backup:
Configuration:
Series 9 (Double Conversion On Line)
80-400 kVA at 0.9 p.f.
230/400VAC 50/60 Hz
Typical 5-60 min (extendable up to several hours)
Cabinet
The Eaton® 93E UPS delivers superior power protection for everexpanding loads in today’s space-constrained data centres. Facilitating
a lower total cost of ownership (TCO) through a combination of
energy-efficiency, high reliability and a compact footprint the 93E is
an ideal solution for small - to medium - sized data centres and other
applications desiring highly reliable power protection.
Energy-efficient design
With a transformer-free design and sophisticated sensing and control
circuitry the 93E is capable of achieving up to a 98% efficiency rating,
making it one of the most energy-efficient UPSs in its class - and it still
provides maximum load protection. Unlike most high efficiency UPSs,
the 93E:
• Network Card–MS Web/SNMP Card allows you to connect your 93E
UPS directly to the Ethernet network and the Internet
• Network and MODBUS Card-MS provides remote monitoring of a UPS
system through a Building Management System (BMS) or Industrial
Automation System (IAS)
• Relay Card-MS enables provides the essential dry-contact interface
between your Eaton UPS and any relay-connected computer as well
as a variety of industrial applications
Software
Eaton’s Intelligent Power® Software Suite incorporates two important
applications for ensuring quality power and uptime:monitoring and
management of power devices across the network combined with
automatic, graceful shutdown when faced with an extended power
outage.
• Monitor and manage multiple power devices across your network
• Extend the uptime of dual-powered servers with redundancy
capabilities
• Enable server shutdown and live migration events
To learn more, please visit www.eaton.com/intelligentpower
• Provides surge suppression for the load
• Detects the location of faults (utility or load) and takes the appropriate
action
• Switches to double-conversion operation in less than 4ms. High
system efficiency reduces utility cost, extends battery run times and
ensures cooler operating conditions.
Applications:
• Small to medium data centres
• Corporate
• Telecom
• Healthcare
48
Real compatibility
• Banking
Active power factor correction (PFC) provides 0.99 input power
factor and <5% ITHD, thus eliminating interference with other critical
equipment in the same network and enhancing compatibility with
generators. The 93E is optimised for protecting modern 0.9 p.f. rated IT
equipment without the need to oversize.
• Industrial
Eaton UPS and Power Quality Products Catalogue
• Education
• Government
Essential protection for Data Centre and Industrial applications
Eaton 93E Technical Specifications
Rating
80kVA
100kVA
120kVA
160kVA
200kVA
300kVA
400kVA
Part number
93E80U-MBS
93E100N-MBS
93E120N-MBS
93E160U-IB
93E200N-IB
93E300U-IB
93E400N-IB
Capacity (kVA/kilowatts)
80/72
100/90
120/108
160/144
200/180
300/270
400/360
Dimensions WxDxH (mm)
600 x 800 x 1880
Weight (kg) UPS only
283
Input connection
Dual Input, Hardwired
Output connection
Hardwired
1600 x 820 x 1880
283
311
457
457
865
970
Operational
Nominal input voltage (Vac)
220/380, 230/400, 240/415VAC 50/60 Hz
Input voltage range
190/330V - 276/478V at 100% load, 161/201V - 276/478V at 50% load
Operating frequency
50 Hz or 60 Hz (42to 70 Hz)
Input power factor
0.99
Input current distortion
<5% THDi at rated input load
Nominal output voltage
220/380, 230/400, 240/415VAC
Output voltage regulation
±1% Balanced static load, ±6% with 5ms recovery from 10% to 90% load step, ±5% Balanced dynamic load
Overload capacity
102-125% for 10 min
126-150% for 1 min
>151% for 150 msec
1000% for one cycle (bypass)
Efficiency
up to 94% (98.5% in HE High Efficiency Mode)
User interface
LCD display
Graphical LCD with blue backlight
LED
4 status indicators
Standard communication ports
2 x Mini Slot (MS),1x Emergency Power Off input, 3x Building Alarm inputs,1x RS232, In-built Hotsync
Options
External battery cabinets and racks; system parallel cabinets; external maintenance bypass; top cable entry sidecar for 80-200kVA
Mini Slot: SNMP/Web/HUB, ModBus, Relay card.
Environmental
Operating temperature
0ºC to +40ºC
Storage temperature
-15ºC to +55ºC
Altitude
1000m above sea level. Maximum 2000m with 1% de-rating per each additional 100m above 1000m
Audible noise at 1 metre
65dB @ 75% Load for 80-120 kVA; 70dB @ 75% Load for 160-200 kVA
73dB @ 75% Load 300-400 kVA
Certification
Quality
ISO 9001 : 2000, ISO 14001 : 1996
Markings
CE / C-Tick
Safety
IEC 62040-1-1; IEC 60950; EN62040-1-1
EMC
EN 50091-2
In the interests of continuous product improvement all specifications are subject to change without notice.
www.eaton.com/powerquality 1300 UPS UPS
49
Premier modular protection for high availability systems
Eaton 93PM
through the display. By being able to monitor the condition of batteries and
view a history log of test data, system maintenance can be better planned
and scheduled ahead.
Typical applications:
• Data centres with rack mount blade servers
• Telecommunications
Product highlights:
• 96.7% efficiency in double conversion
• > 99% efficiency with Energy Saver System (ESS)
• Standard 10-20 minutes full load runtime with internal batteries
• Intelligent Power Manager® allows you to monitor and manage your
UPS system as an integral part of power infrastructure
• Plugs into leading virtualisation management systems like
VMware vCenter, Microsoft SCVMM and Citrix XenCenter
• Display shows power quality, energy consumption
and efficiency trends
• Data logging feature allows easy measurement,
monitoring and managing
Technology:
Rating:
Voltage:
Backup:
Configuration:
Series 9 (Double Conversion On Line)
30-50kW at 1.0 p.f.
230/400VAC 50/60 Hz
10-20 min internal (extendable up to several hours)
Cabinet
Introducing the Eaton 93PM UPS, helping you to combat the costs of
energy and the ever-increasing power demands of IT infrastructure.
Featuring industry-leading operating efficiency of 96.7% and world-class
intelligent software solutions, the 93PM is the surest way to secure the
continuity of your mission-critical applications. All this compactly in 0.5 m².
Options:
• Variety of connectivity card options
• Environmental Monitoring Probe
• Extended runtimes with line-and-match external battery cabinets
• External maintenance bypass (wall mountable)
• System Parallel Modules
On-line double conversion topology ensures the UPS output is not affected
by any abnormalities in the utility power and keeps critical load equipment
protected against all common power problems. With Eaton 93PM
UPS, modern multi-level converter technology ensures that in double
conversion no energy is wasted and the UPS operating efficiency is topof-market 96.7% resulting in significant savings in operational costs.
Energy Saver System delivers superior > 99% efficiency Even small
increases in UPS efficiency can quickly translate into thousands of dollars,
realised in more real power and lower cooling costs. Energy Saver System
enables > 99% efficiency across the typical UPS operating range. In ESS,
the load is powered securely through the static bypass line with double
conversion available on-demand with typical 2 ms transition time in the
event of any abnormality on supply source. When operating in ESS mode,
the load is protected with inherent surge suppression.
When utility power quality is high, ESS can reduce UPS power losses by
75% as it runs on double conversion only when needed. The Eaton 93PM
UPS is a high power density solution. In a footprint of just 0.5 m², it can
provide full rated power and standard backup time with internal batteries.
Eaton's advanced charging algorithm prolongs battery service life
significantly compared to traditional charging methods. Automatic battery
tests ensure any defects on batteries are detected and any failed blocks
replaced on time. Battery health data is available for viewing easily
50
EATON CORPORATION UPS and Power Quality Products Catalogue
Door LEDs provide "at-a-glance" status indication
™
Premier modular protection for high availability systems
Eaton 93PM Technical Specifications
General
UPS output power rating (1.0 p.f.)
30, 40, 50, 80, 100, 120, 150, 160, 200 kW
Efficiency in double conversion mode
Up to 97%
Efficiency in Energy Saver System (ESS)
> 99%
Field upgradeable
Yes
Inverter/rectifier topology
Transformer-free IGBT with PWM
Audible noise
30–50 kW: < 60 dBA, 80–200 kW: < 65 dBA, ESS operation: < 47 dBA
Altitude (max)
1000 m without derating (max 2000 m)
Input
Input wiring
3ph + N + PE
Nominal voltage rating (configurable)
220/380, 230/400, 240/415 V 50/60 Hz
Input voltage range
High +20% rectifier input, 10% bypass input, Low –15% at 100% load, –40% at 50% load without battery discharge
Input frequency range
40–72 Hz
Input Power Factor
0.99
Input ITHD
30 kW: < 4.5%, 40–200 kW: < 3%
Soft start capability
Yes
Internal backfeed protection
Yes
Battery
Battery type
VRLA
Charging method
ABM technology or Float
Temperature compensation
Optional
Battery nominal voltage (VRLA)
432 V (36 x 12 V, 216 cells) or 480 V (40 x 12 V, 240 cells) Note: Strings with different battery voltage may not be paralleled!
Charging current maximum
30–50 kW 16.5 A, 80–100 kW 33 A, 120–150 kW 49.5 A, 160–200 kW 66 A
Battery start capability
Yes
Output
Output wiring
3ph + N + PE
Nominal voltage rating (configurable)
220/380, 230/400, 240/415 V 50/60 Hz
Output UTHD
< 1% (100% linear load)., < 5% (reference non-linear load)
Rated output power factor
1.0
Permitted load power factor
0.8 lagging – 0.8 leading
Overload on inverter
10 min 102–110%; 60 sec 111–125%; 10 sec 126–150% 300 ms > 150%. On battery mode 300 ms > 126%
Overload when bypass available
Continuous < 125%, 10 ms 1000% Note: Bypass fuses may limit the overload capability!
Accessories options
External battery cabinets with long-life batteries, External maintenance bypass switch, integrated manual bypass (up to 150kW) and MiniSlot connectivity
(Web/SNMP, ModBus/Jbus, Relay)
Communications
MiniSlot
3 communication bays
Network/SNMP interface
Yes, standard
Serial ports
Built-in host and device USB
Relay inputs/outputs
5 relay inputs and dedicated EPO 1 relay output
Environmental
Operating temperature
0ºC to +40ºC
Storage temperature
-25ºC to +55ºC
Altitude
1000m without derating (Maximum 2000m)
Audible noise at 1 metre
55dB @ 75% Load, 60dB @ 100% Load
Compliance with standarts
Safety (CB certified)
IEC 62040-1
EMC
IEC 62040-2
Performance
IEC 62040-3
www.eaton.com/powerquality 1300 UPS UPS
51
Premier Modular High Efficiency UPS Solutions 200 - 1100kVA
Eaton Power Xpert 9395
Features:
Delivers the highest reliability and availability for large, mission-critical
systems by integrating a redundant multi-module UPS (including the
System Bypass Module) into a single, pre-wired unit
Grows with changing power requirements with scalable architecture that
allows you to add another 275 kVA module on-site later for capacity or
redundancy
Eliminates the need to switch to bypass for service with concurrent
serviceability: One redundant 275 kVA module can be isolated and serviced
while the other is online
Provides unmatched power performance for efficiency, input current
harmonic distortion (THD), and power factor
Ensures battery reliability with innovative ABM® three-stage charging
system, battery health-checks, optional temperature-compensated
charging, and remote monitoring
Lowers installation time and costs with small footprint and the flexibility to
install against walls using top- or bottom-entry cabling and by eliminating
the need to run inter-unit cabling on-site with pre-wired configuration
Integrates seamlessly with PowerXpert software to enable you to monitor
and manage the UPS, as well as the entire power system, including all
upstream and downstream switchgear
™
Technology:
Rating:
Voltage:
Backup:
Configuration:
Series 9
200kVA – 1100kVA at 0.9 p.f.
230/400 VAC 50/60Hz
5-60 min
Cabinet
The Eaton 9395 uninterruptible power system (UPS) is a double-conversion
UPS that resolves all utility power problems and supplies clean, continuous,
uninterruptible power to connected equipment. Whether you’re selecting
a UPS for a branch office, manufacturing floor, medical facility, or a large
data centre, there’s a 9395 model that delivers just the right combination of
performance and price for your needs.
Taking large system mission critical reliability to the next step. The 9395
combines the reliability and redundancy of a multi-module UPS into an
integrated, pre-wired solution. Built with up to 275 kVA building blocks, the
9395 features N+1 internal redundancy, which allows one 275 kVA module
to automatically carry the load in the event the other module is out of
service.
Advanced design delivers unequalled power performance. The innovative
design of the 9395 delivers the industry’s best performance combination of
efficiency, input current distortion and power factor. The 9395 operates at
a high efficiency of up to 99%, reducing utility costs and extending battery
runtimes. Higher system efficiency produces cooler operating conditions,
which reduces facility air conditioning cost, extends the life of UPS
components, and increases overall reliability, availability, and performance.
A new input circuit design keeps input current THD low and input power
factor near unity without compromising overall efficiency.
Eaton's Energy Advantage Architecture
9395 features maximised energy efficiencies with Energy Advantage
Architecture (EAA): Variable Module Management System (VMMS)
optimises system efficiency at low load levels and Energy Saver System
(ESS) allows dramatic increase in UPS efficiency without sacrificing load
protection.
52
EATON CORPORATION UPS and Power Quality Products Catalogue
Optional 10" touchscreen display
Premier Modular High Efficiency UPS Solutions 200 - 1100kVA
Eaton 9395 UPS with redundant, field-installed module
275 kVA field-upgradable
UPS-U can be added for
redundancy
Redundant 275 kVA
uninterruptible power system
550 kVA Integrated system bypass
module (ISBM)
Eaton 9395 Technical Specifications
UPS rating
Dimensions (W x D x H)
Weights
kVA
200
225
275
300
400
450
550
600
825
1100
200kVA
1350x880x1800 mm
810 kg
kW
180
202
250
240
360
405
500
480
750
1000
225,275 and 300kVA
1350x880x1880 mm
830 kg
400kVA and 200kVA redundant
1890x880x1880 mm
1390 kg
550/600kVA and 275/300kVA redundant
1890x880x1880 mm
1430 kg
550 kVA redundant
2520x880x1880 mm
2030 kg
275 kVA field upgrade UPS-U
740x880x1880 mm
600 kg
825 kVA
3710x880x1880 mm
3460 kg
1100 kVA
4450x880x1880 mm
3460 kg
General characteristics
Efficiency
Up to 95%
Parallel capability
Up to 5 modules
Audible noise
75 to 81.5dBA @ 1m, model dependant
Altitude (max)
1000 m at 40°C
Internal N+1
redundance capable
Yes
Field upgradeable
for redundancy
System bypass module
Included
Input characteristics
User benefits
Control panel (LCD)
8 lines x 40 characters
Frequency conversion
Optional
Remote display panel
Optional
Buildings alarm inputs
2 (galvanic isolated)
Voltage
415
Voltage range
+15% / -20%
Frequency range
45-65 Hz
Power factor
0.99
Input current distortion
3-5% in nominal load condition
Back/side against wall installation
Soft start capability
Yes
Optional accessories
Internal backfeed
Protection
Yes (except on 200/400kVA models)
Serviceability
Integrated maintenance bypass
Input breaker
Batteries
Output characteristics
Standard
in line-and-match cabinets
Voltage
415
Certification
Regulation
± 1%
Safety
IEC 62040.1.1
Inverter
PWM with IGBT switching
EMC
EN50091.2
Voltage THD
< 2% (100% linear load); < 5% (standard non-linear load)
Load power factor range
0.7 lagging to 0.8 leading
Battery
Battery types
VRLA, AGM,
Battery voltage
480 V
Temperature
compensation
Optional
Charging method
Advanced battery management technology
Communications
Software compatibility - Power Xpert
Communication cards - Two communication bays standard. Maximum of four
communication bays with the communication expansion option. The following
connectivity options can be installed at any time.
- ConnectUPS Web/SNMP/xHub, Modus card, Relay Interface Card (Use for
AS400s), Industrial Relay Card ([email protected]), Hot Sync® CAN Bridge Card provides CAN
communications, isolated RS-485 port, Environmental Monitoring Probe (EMP)
www.eaton.com/powerquality 1300 UPS UPS
53
®
Intelligent Power Distribution
Maximise your available power
• Utilise all your available power – through Intelligent
Power® monitoring
Ensure you have the power you need, where you need it
• Combinations of IEC C13, C19 and local sockets
• Manage your moves and changes in the data centre and redistribute
your power
• Know what power is available for you to add servers or capacity,
or if you are reaching capacity
Maximum availability
• Designed for the data centre environment and to fit in any industry
standard rack
• Rugged Aluminium chassis, with multiple mounting options
• Available in 0U Vertical, and 1U or 2U horizontal options
• High quality components and state-of-the-art technology and circuitry
Managed ePDU
Basic ePDU
Managed ePDUs offer the data centre managers the maximum
functionality – fully Intelligent Power distribution for – complete
understanding and control, of Data Centre power distribution, including:
Designed for reliable and cost effective power distribution, Basic ePDUs
have the form factor and outlet choices to meet your needs.
• Monitoring: highly accurate individual outlet, branch circuit, and full
ePDU monitoring for V, W, A and kWhrs. Also monitor temperature and
humidity in the rack via optional sensors
• Switching: individual outlet, sequencing of outlets with delays or
cycling enables remote reboot of equipment
• Control: Monitor and control remotely over Ethernet and via Advanced
LCD screen on the unit. Communication protocols include HTTP /
HTTPS, DHCP, SNMP v1 and v3, SNTP, SMTP, Telnet, IPv4 & IPv6
Manage your power consumption
• Control your operating costs by monitoring and tracking consumption
from rack to branch, right down to the individual server
• Easily identify physical branch sections and related breakers through
Colour-coded sections
• Accurate V, W, A and kWhr measurement enables analysis
and tracking
Designed for the Data Centre: All ePDUs, including basic ePDUs,
are made of rugged aluminium or steel chassis and incorporate fully
shrouded circuit breakers and switches, they are designed to be highly
reliable, and designed to last.
Advanced Monitored ePDU
Advanced Monitored ePDUs give the data centre manager the detailed
information and understanding they need to efficiently and effectively
run their data centre
• Monitoring: Highly accurate individual outlet monitoring, branch circuit
monitoring and the ePDU as a whole, for V, W, A and kWhrs. Also
monitor temperature and humidity in the rack via optional sensors
• Control: Monitor and measure key properties and alerts remotely over
Ethernet or via Advanced LCD screen on the unit. Communication
protocols include HTTP / HTTPS, DHCP, SNMP v1 and v3, SNTP, SMTP,
Telnet, IPv4 & IPv6
• Enables you to see what your servers are doing
Monitored ePDU
Complete control and understanding
Monitored ePDUs monitor the current draw to allow for provisioning
and load balancing of servers, and to ensure current draw is not
approaching breaker limits.
• Control your power distribution and consumption
• Build knowledge base of what is going on
• Switch, sequence outlets and outlet groups as well as individually
monitor – you have complete control
Switched ePDU
Switched ePDUs give control to the Data Centre manager – be able to
remotely shut off or restart equipment, and ensure that it starts up in the
correct sequence with the correct delays.
• Switching: on and off control of individual outlets, together with
cycling and sequencing of outlets, branch circuits and the ePDU
as a whole
• Monitoring: Highly accurate monitoring of the ePDU as a whole for V,
W, A and kWhr. Also monitor temperature and humidity in the rack via
optional sensors
• Monitoring: Monitor current on input and each branch circuit to
ensure accurate load balancing
• Control: Monitor and measure remotely over Ethernet or via LED
interface on the unit
Transfer Switch
The STS source transfer switch is a simple and effective solution to
manage the redundancy provided by two independent power sources.
STS handles the automatic or manual transfer of your loads between
two independent power sources without interrupting the supply of
power (< 6 milliseconds). Either of the two sources may be designated
as the preferred source with the other becoming the alternate source.
In the event of a failure, transfer from one to the other is automatic
and instantaneous.
• Control: Monitor over Ethernet or via Advanced LCD screen on the unit,
control via Ethernet. Communication protocols include HTTP / HTTPS,
DHCP, SNMP v1 and v3, SNTP, SMTP, Telnet, IPv4 & IPv6.
54
EATON CORPORATION UPS and Power Quality Products Catalogue
Airf low management and racks
Aisle containment
Industry studies indicate that an estimated 60% of the cool air
supplied to traditional data centres is wasted because it bypasses the
intended IT equipment and returns directly to the hot air intake of the
CRAC. Adopting a cold or hot aisle containment strategy increases
air efficiencies, allowing a significant reduction of cold air supply,
translating to longer hardware life and valuable energy savings.
Eaton’s solutions can be equally effective for both hot and cold aisles in
the data centre.
Rack Integrated System
Features and Benefits
End of Row Doors create more efficient cold aisles by blocking an
obvious cold-air escape route and entry for hot air re-circulation and air
mixing. This allows you to set a higher overall temperature within the
data centre thus saving energy and extending hardware life.
• Variety of Door Models – Choose from three styles of doors – Singleswing, double-swing café style and sliding doors
Eaton’s ceiling system is comprised of clear panels made from materials
with multiple ratings including UL94 V-0, ASTM E 84, FM4910 or
antistatic. These panels mount easily to the top of Paramount, Vantage
S2 and third-party enclosures. The ceiling system is modular and
scalable to accommodate differences in rack heights and row spacing.
It's self-supporting structure allows for easy rack changes within the
row. Fire-activated ceiling panels ensure quick row access for critical
fire suppression.
• Rack Agnostic – Flexible enough to install almost anywhere on any
manufacturer’s brand enclosure
• Ease of Installation – Field-installable, rack-integrated and freestanding
options available
• Improve Efficiency and Predictability – Increases cold air intake
efficiency, from the bottom of the enclosure to the top, within the
cold aisle
• Minimise Air Re-mixing – Cost-effectively minimise air mixing between
the hot and cold aisle while keeping the uniform cold air supply in front
of the servers for a consistent temperature top to bottom
Independent Containment System (ICS)
The culmination of Eaton containment strategies is its patent pending
Independent Containment System (ICS), a free-standing, scalable,
sustainable and vendor-neutral containment solution for high-density
computing environments.
Designed to provide maximum flexibility in all environments, the ICS,
assembled within the footprint of a standard aisle, is constructed with a
tubular steel frame. The frame’s structure is designed to be freestanding
and meets seismic NEBS Zone 4 standards.
Additionally, it accepts a variety of Eaton’s End of Row Doors including
café style, swing and sliding models.
Features and Benefits
• Scalable Design – The ability to extend aisles with load growth makes
the ICS an ideal solution for co-location and other highly evolving data
centre. Design can support an overhead cable tray
• Containment Integrity – Vertical blanking panels ensure airflow
containment when racks are partially deployed within the row and are
easily removed in sections to allow quick installation of new IT racks
• Rack Agnostic – Ability to support virtually any brand of server
or network rack in any depth, height and size with on-demand
reconfiguration of the row
Shown above - Independent Containment System featuring
End Of Row, Cafe-style doors and vertical blanking panels to
accommodate third-party enclosures.
• Cold/Hot Aisle Compatible – Easily deployed as a cold aisle
containment solution with or without a down flow chimney system
• Increased ROI – Modular, building-block design offers complete
flexibility and room for growth increasing your initial Return on
Investment (ROI)
www.eaton.com/powerquality 1300 UPS UPS
55
Airf low management and racks
Rack containment
Eaton Heat Containment System (HCS)
Eaton's HCS is a simple, scalable and low cost solution to cool up to 25
kW or more per enclosure without the expense of adding supplemental
CRAC units to your data centre. This patented technology is available on
Eaton’s Paramount and Vantage S2 enclosure systems and can also be
field retrofitted to most manufacturers' enclosures. The HCS contains
and directs the heat exhaust of your IT equipment through the chimney
that is attached to the top rear of the enclosure. The hot air is then
ducted to your existing CRAC units through a plenum ceiling or high
air returns.
Active Airflow Manager
HCS for third-party racks
Converting existing enclosures to the HCS allows you to eliminate the
incremental capital expense associated with having to add more CRAC
units or other supplemental cooling.
Features and benefits:
• Implement heat containment operations by building up from existing
enclosures without having to re-route or disconnect cables and power
• By isolating the hot exhaust air from the cold supply air, you can load
over 25 kW of equipment in an enclosure
• Requires no additional air conditioners or other space consuming
supplemental equipment at the perimeter of the data centre, in-row
or overhead
• Eliminates chaos airflow results in a more predictable operating
environment, allowing you to drive efficient energy use and create a
reliable infrastructure for moves, additions and changes
Eaton’s HCS pressure based system with active airflow, when combined
with best practices, improves performance metrics considerably.
Allocating the correct amount of airflow at known intake locations is
the key to reducing energy consumption while increasing equipment
performance. Best practices such as blanking panels, proper perforated
tile placement and the reduction of bypass airflow must be employed to
ensure desired results.
Eaton’s P Series enclosure
with integrated HCS.
Features and benefits:
• SNMP managed device with user-friendly Web interface
• Controller continuously monitors pressure differentials to ensure that
air entering the enclosure and server is properly removed
• Local LEDs indicate fan status including fan fail and over temperature
• Manage up to 64 peer active Airflow Managers via Ethernet
• Two integrated temperature sensors with e-mail alert capabilities
• Redundant power input, C13 plug type is required for each input, 90-240
Vac supplied by enclosure PDU(s)
• Controller is RoHS compliant
• Utilisation as your capacity demands grow
• Dramatically increasing the reliability of the data centre increasing
their efficiency by operating at a higher Delta T (DT) centre, freeing up
stranded assets and lowering operational costs locations and it is also
field-installable on third-party enclosures
The HCS allows for your
existing cable management
without the interruption of
re-routing or disconnecting
cables and power. Shown
here on Eaton's Paramount
Enclosure System.
Optional fans (2)
Chimney
Tool-less fan access door
Chimney base
56
EATON CORPORATION UPS and Power Quality Products Catalogue
Airf low management and racks
Enterprise-class racks
Eaton P Series enclosure system
Our premier enclosure platform, P Series not only supports an industry
leading 1,000 kilograms of equipment in a fully welded frame, but it is
also designed to adapt to the ever-changing requirements of the data
centre through a scalable and modular approach. Speed of deployment
is essential to any company when considering time to market. P Series'
modularity and building block design ensures quick reconfigurations and
minimises downtime, protecting your initial investment.
Features and benefits:
• Superior airflow control and management
• Flexible platform allows for ever-changing
requirements, protecting your initial investment
Rack accessories
Blanking panels
Blanking panels provide a quick, easy and cost-effective solution to
optimise air circulation within an enclosure while maintaining high
aesthetics. Eaton offers blanking panels in a variety of styles including
tool-less, mechanically fastened, clear and with cable pass through
options in steel as well as plastic. The width meets EIA-310-D standards
and they come in various heights (depending on style). Most panels are
bulk packed in quantities of 10 and 100.
Features and benefits:
• Industry leading weight capacity of up to 1,000
kilograms handles even the heaviest server
equipment
• Significantly reduces re-circulation of hot exhaust air to the
equipment inlet
• Guaranteed compatibility with TIA/EIA-310-D*
standard sized equipment
• 1U, 2U, 3U, 4U, 5U, 6U, 7U, 8U and 20U (depending on style)
• Eaton's patented Heat Containment System
(HCS) cools up to 25 kW or more per enclosure,
without the expense of adding supplemental
CRAC units to your data centre
• Color: black steel, black plastic, clear plastic
• Adds to the overall aesthetics of the data centre
• EIA-310-D compliant for 19" equipment
• Available in tool-less, mechanically fastened, clear and cable
pass-through styles
• Full complement of accessories to handle non-rackmount devices
• Industry leading cable access and management
Eaton E Series enclosures
Eaton’s E Series enclosures provide high quality and advanced features
at an affordable price.
Features and benefits:
Solid side panel
A solid side panel kit (qty. 2) is available to further
enclose your rack where end of row or single rack
aesthetics is necessary.
• Lightweight but sturdy
Air Seal Kits
• Stylish contoured front door provides
2,649.22cm2 total open area. Exceeds major IT
equipment air flow requirements
Stop air leakage through small openings and
gaps in the doors, sides, bottom or top of your
enclosures.
• Vendor neutral, compatible with all 19”
standard IT equipment
• Depth adjustable 19” vertical mounting rails
• “U” numbers printed on rails
• Quick release and field reversible doors
Heavy-duty fixed shelf
• Overall height on casters, just under 2 metres,
fits through standard doorway
Supports non-rackmounted equipment. Four
point mounting and 400 pound weight capacity.
• Two piece side panels provides easy access
to interior
• Available in flatpack or fully assembled cabinet
• Quick assembly time, approximately 30 minutes
Specifications:
• Overall dimensions: 600W or 800W x 1000D x 1950H
• Useable height: 42U
• Load rated to 1,000 kg static
Environmental Rack Monitor
Monitor Temperature & Humidity at two points in
a rack or small server room, aswell as up to four
contact sensor devices, ie Water leak, Vibration,
Door contact or Smoke.
• Standard: EIA-310D, IEC-60297-2
• Material: high-grade cold and hot rolled steel/all materials
RoHS compliant
• Finishing: 5 stage iron phosphate pre-treatment followed by tough
scratch resistant powder coat paint
www.eaton.com/powerquality 1300 UPS UPS
57
®
Intelligent Power Software Suite
Eaton’s Intelligent
Power® Software Suite
Incorporates two important applications for ensuring quality power
and uptime: monitoring and management of power devices across
the network and automatic, graceful shutdown when faced with an
extended power outage.
Use each software independently or as a powerful combination.
Together with your UPS, they provide end-to-end power management for
maximum uptime and data integrity.
Intelligent Power Manager: software for extensive monitoring
and management.
Intelligent Power Protector and UPS Companion: shutdown
software for extended power outages.
Intelligent Power Manager supervisory software lets you monitor and
manage multiple power and environmental devices across the network
from a single interface, giving you up-to-the-minute information on the
status of power in your network. It also works seamlessly with VMware’s
vCenter Server™ and vMotion™ as well as Microsoft’s SCVMM™ and
Live Migration.
• Monitor and manage multiple power and environmental devices from
any Internet browser or your vCenter dashboard
• Auto discovery provides fast installation by automatically detecting
devices on the network
• Mass-upgrading of firmware capability reduces network management
card setup and maintenance time
• Shutdown agent management enables safe shut down of servers
• Multiple password-protected access levels and support for secure
communications
Intelligent Power Protector and UPS Companion protection software
provides graceful, automatic shutdown of network devices during a
prolonged power disruption, preventing data loss and saving workin-progress. As part of Eaton’s power network management system,
these two applications work together to deliver comprehensive power
management and protection.
• Helps you avoid data loss by gracefully shutting down computers and
virtual machines/servers powered by an Eaton UPS during an extended
power outage
• Easy-to-use interface from any PC with a Web browser
• Acquires UPS information through local or network communication and
can be easily deployed on many computers
• Can be remotely managed, configured and updated with Eaton’s
Intelligent Power Manager
• Can communicate with the protected device directly (via USB) or
through the network (via Web/SNMP card)
• All the functionality of an enterprise-class monitoring solution for free
or at a fraction of the cost
• Support for up to 10 devices included at no charge; additional capacity
may be purchased
Benefits for Virtualised Environments
Intelligent Power Manager’s Integration with vCenter helps data centre managers reduce infrastructure and operating costs while increasing
productivity and operational responsiveness Intelligent Power Manager triggers vcenter’s vMotion and SCVMM’s Live Migration applications to
transparently move virtual machines from a server affected by a power interruption to an available server on the network, ensuring data integrity and
zero downtime.
58
EATON CORPORATION UPS and Power Quality Products Catalogue
Options to Manage and Monitor Your UPS
Network Management Cards
ConnectUPS Web/SNMP card
Relay Cards
Network Card-MS
Network Card-MS and ConnectUPS Web/SNMP cards are a complete
UPS monitoring, control and shutdown solution in a networked IT
environment. In case of alert the Web/SNMP card can notify users and
administrators through e-mail and SNMP traps. In case of a prolonged
power failure the protected computer systems can be shut down in a
graceful manner with Intelligent Power software. The unique
three-port switching hub on the X-Slot model provides additional
network connections.
Relay/AS400 cards
Relay Card-MS, Minislot Industrial Relay Card and X-Slot Relay cards
are an easy connection to IBM AS/400 series computers as well as
industrial and building management systems.
Other Devices
Industrial Network Cards
Environmental Monitoring Probe
ModBus cards
Network & Modbus Card-MS and X-Slot Modbus cards connect the UPS
to industrial and building management systems using ModBus
RTU protocol.
Power Xpert Cards
Power Xpert Gateway Card"
Power Xpert Gateway cards provide Web-enabled, real-time monitoring
of Eaton UPSs and PDUs through standard onboard Web pages, Power
Xpert Software or third-party software. As an integral part of the Power
Xpert Architecture, the cards provide a central point to connect UPS and
PDUs to an Ethernet network via an X-Slot communication bay.
Environmental Monitoring Probe (EMP) adds temperature, humidity
and two contact closure monitoring capability to Network Management
Cards and Power Xpert Cards. It is especially well suited for monitoring
rack temperature and door status. Operating system shutdown can be
triggered if user defined thresholds are exceeded or contact closure
status changes.
ViewUPS-X
ViewUPS-X remote display is an LCD panel that lets users view the
status of the UPS from as far as 100 m. ViewUPS-X has also four status
LEDs and an alarm sound. The display is bundled with a dedicated X-Slot
card that also powers the display through the communication cable.
In addition to the remote display connection the card has also a
SELV isolated relay port for connection to monitoring systems and
AS/400 computers.
www.eaton.com/powerquality 1300 UPS UPS
59
Eaton's Power Xpert® Architecture
Manage Power as a
Strategic Asset
A simple, Web-based
interface helps you to:
Today, the IT infrastructure is viewed—and managed—as a strategic
business asset. Clearly, the quality of the electrical power that flows
through facilities, data centres and server rooms should be a factor
when IT managers measure infrastructure performance. Yet, invisible
and fleeting power disturbances can be silent killers—often going
unmonitored and unnoticed.
• Understand energy usage patterns and baselines
With Eaton’s Power Xpert Architecture—the backbone of our
PowerChain Management solutions—you gain unprecedented visibility
into the entire power system. A framework to view your entire power
system, Power Xpert Architecture encompasses conditioned power in
the data centre as well as unconditioned power coming into the facility.
Through hardware, software and communication elements, the
architecture unites diverse power components across your enterprise
into a single view—old and new PDUs, batteries and other critical
equipment from multiple manufacturers. So you can monitor, control
and manage the power system more effectively and efficiently as you
correlate events across the power system, drill into details for quick
diagnosis and use tools to determine appropriate actions.
Web Browsers
view Power
Xpert Software
& components
• Reduce peak loads, identify high energy users and realise
energy savings
• Find the real causes of issues, including power event “ghosts,” sags,
swells and transients
• Analyse event severity according to IT standards
• See your power quality at a glance
Leverage Power Xpert Architecture to establish a unified management
approach for your enterprise. The solution is based on open standards
so that devices can communicate. It synchronises equipment clocks
through a network time server so you can accurately correlate events at
different points in the system.
Power Xpert Architecture—It’s one of Eaton’s powerful innovations in
facility monitoring and management. For additional information about
Power Xpert Architecture and to download the product data sheets,
visit: www.eaton.com/powerxpert.
Software users
view, monitor, and
manage information
about their power chain.
PowerXpert
Dashboards
view the status
of your power
chain at a
glance.
PowerXpert Server
Core Software to
help you model,
monitor and manage
your power chain.
60
EATON CORPORATION UPS and Power Quality Products Catalogue
Power Management
Power and Energy
Meters
Power Xpert Meter 4000/6000/8000
Eaton’s Power Xpert Meter series represents world-class power
monitoring that reduces day-to-day operating costs and helps avoid
costly business interruptions. The meters combine state-of-the-art
technology with an embedded Web server, advanced power diagnostics,
data trending and performance benchmarking, along with a twist-n-click
LCD for simplicity and ease of use.
Features and Benefits
• Free download of
power Xpert Meter
Profiler to trend
and predict energy
usage
• Embedded Web
Server
• Automatic power
quality analysis
and trigger setting
with built-in ITIC
performance curve
• Comprehensive
power, energy and demand measurements for 138 standard data points
logged
• At-a-glance view of power quality analysis with patented Power Quality
Index gauge
• Industry-standard communication protocols, to support a multitude
of configurations and third-party software: HTTP, FTP, Modbus RTU,
Modbus TCP, SNMP, SMTP, NTP, COMTRADE
• High storage capacity
IQ 250/260 series
Metering products
The IQ 250 and IQ 260 electronic meters provide capabilities you
wouldn’t normally expect in an affordable, compact meter—such as
fast sampling rate and accurate metering for a full range of power
attributes. The meter can be configured either from the easy-to-read
display or remotely (accessible via a Power Xpert Gateway) via included
configuration software. In addition, built-in slots allow for upgrades to
input/output option cards.
IQ 250/260 Features
• Comprehensive metering
• High-end accuracy
• Large, easy-to-read display
• Local or remote configuration
• Industry-standard
communication protocols
(Modbus)
• Mix-and-match input/output
options
• Field-upgradeable
IQ 100 series
Metering products
Providing the first line of defense against costly power problems, Eaton’s
IQ 100 electronic power meters can perform the work of an entire wall
of legacy metering equipment utilising today’s technology. Eaton’s IQ 100
meters use 24-bit AD converters that sample at more than 400 samples
per cycle and meet ANSI C12.20 standards for accuracy of 0.5 percent.
With such high-performance measurement capability, these meters
can be confidently used for primary revenue metering and submetering
applications.
• ANSI C12.20 accuracy
• CE certified
Applications
• Utility and commercial metering
Power Xpert Meter 2000 series
• Substations, industrial facilities,
power generation sites and
campuses
Compact Power Quality Metering products
• Submetering
The meters combine state-of-the-art technology with waveform viewing,
data trending and performance benchmarking. The embedded Web
server enables users to surf to the meter over the Internet via a standard
Web browser. This platform offers adaptability such as field-upgradeable
firmware and optional digital inputs/outputs and analog outputs.
• Load studies and voltage
recording
• Analog meter replacement
Identify power quality problems
to help:
• Protect motors from damage
• Preserve the integrity of
processes and batches
• Prevent blown capacitor
bank fuses
• Protect transformers and
conductors from overheating
www.eaton.com/powerquality 1300 UPS UPS
61
Power Management
Power Xpert® Software
and Foreseer Services
Power Xpert® Software
Power Xpert® Software enables you to manage the complexities of
large system deployments, from one desktop, on one screen. Web
enabled hardware devices are fine in limited numbers, but as the
number of components grows or becomes more complex, Power
Xpert® Software is the logical choice for the required trending, analysis
and alarming systems.
Power Xpert® Software is Web-enabled, open and time synchronised.
Using only a browser, you can access the software from anywhere
your network can reach, including remotely. Designed to communicate
graphically with the broad range of Eaton and non-Eaton devices, Power
Xpert® Software uses industry-standard protocols. The software is
available in two editions: Professional and Enterprise.
Power Xpert® Software Professional Edition
• Geared towards end users, with built in support for Eaton power
distribution products such as switchgear, UPSs, breakers, PDUs, RPPs,
meters, relays, VFDs and MCCs among others
Standard reports include: Energy Summary Report, Energy Cost
Allocation Report, Power Quality Report, Branch Circuit Report, Capacity
Summary Report, Event
Summary Report, Joint
Commission (JCAHO)
Report.
Highlighted features
• Helps quality for LEED
credits
• Reporting hierarchies
organise device data
• Microsoft Excel
integration for further
analysis
• Web browser access
• Connect to
multiple databases
simultaneously
Foreseer Services
Foreseer Services provide vendor independent, power and energy
infrastructure integration solutions that help companies reduce energy
consumption and unplanned downtime due to the failure of critical
power, environmental, safety or security systems.
• Eaton products connect with the software directly via an Ethernet
connection, while legacy devices use a Power Xpert Gateway to Webenable their communications
Features and Benefits
• A subset of third-party meters and devices are supported as standard
via the gateway connection
• Offered in three main categories: Foreseer Software Services,
Foreseer Project Management Services and Foreseer Engineering
Services.
Power Xpert® Software Enterprise Edition
• Geared towards advanced power users, system integrators and
enterprises with heterogeneous device spectrum and system
developers who can take advantage of the included SNMP and
Modbus integration development utilities
• Extensive support for third-party devices via standard SNMP and
Modbus TCP protocols
• Large variety of ready made third-party drop in drivers
62
Power Xpert Reporting
• Turns data into Distributed, scalable architecture is tailored to meet
organisational needs.
• High performance trend analysis and forecasting tools assess
equipment performance through cause analysis, impact analysis,
capacity planning, preventative maintenance assessments and
trending.
• Extensive, multi-vendor, device-driven library interfaces monitor a
multitude of different device types
• Customisable, graphic user interface (GUI) depicts any company or
organisational topology in the initial design.
• Web browser access and remote notification enables easy system
access without the need for additional client seat licenses.
EATON CORPORATION UPS and Power Quality Products Catalogue
Power Management
Energy Management
System Upgrade Kit
Monitoring:
42 circuits (one panel) or 84 circuits (two panels)
Rating:
208/120V, 380/220V, 400/230V, 415/240V
Configuration: Wall-mounted, standalone unit
Features
Millions of dollars a year are invested in power protection systems such
as UPSs and generators, but problems can still occur at the branch
circuit level due to improper loading or inadequate monitoring. You might
not be able to see trouble coming until a circuit breaker trips, and that’s
too late. Systems go down. Valuable data is lost, and business comes to
a standstill. It can take hours to recover.
• Monitors power conditions on individual breakers, panels or at the
equipment level—three tiers of visibility within one unit
• Provides remote monitoring via the Power Xpert® Gateway Card,
The EMS continuously measures the current on all breaker levels and
warns you of impending trouble, so you can take proactive steps. Armed
with these insights, data centre and facilities managers can more
effectively balance loads, prevent overload conditions, plan for future
capacity needs and, where applicable, allocate energy cost among
internal departments.
• Extends the branch circuit monitoring capabilities of the Eaton
Energy Management System (EMS) to legacy and third-party power
distribution equipment
which links Eaton and non-Eaton equipment to the local area network
or the Internet
• Tracks and records more energy parameters and provides more
standard features than alternative branch circuit monitoring systems
from other vendors
• Delivers real-time and historical information for precision analysis,
troubleshooting, power management, billing and energy planning
• Streamlines and unifies the management of diverse, multi-vendor
power distribution systems
Extending the reach of the Energy Management System
The EMS has always integrated with Eaton’s latest generation of power
distribution panelboards, power distribution units and remote power
panels. Now a new Eaton Energy Management System Upgrade Kit
is available to extend these branch circuit monitoring capabilities to
existing equipment, from Eaton or others. With the EMS Upgrade Kit,
you bring the entire power distribution system under the support of the
EMS. Even if you have a mix of older equipment from other vendors, you
get the insights to effectively manage the edge of the power distribution
system. You will be able to track and analyse:
• Time-stamped metering, alarm, event and statistical information
• Peak loads, along with current, power and frequency minimums
and maximums
• Voltage and power, monitored all the way down to the branch
breaker level
• Power quality metrics, such as total harmonic distortion (THD) and
power factor (PF)
• Load profiling to make the best decisions for energy planning This
information is shown for individual circuits, each panelboard and at
the equipment level—equipment such as a power distribution unit
(PDU) or remote power panel (RPP)—to provide visibility at all levels in
one system.
www.eaton.com/powerquality 1300 UPS UPS
63
Surge Protection Devices
Surge Protection Equipment Overview
In nanoseconds a power surge can do major damage to sensitive
equipment and data. It can come from anywhere, and like a bullet, you
only know it has been by the destruction left behind.
1. Eaton PPFi
2. Eaton SPD3200
5. Eaton Quickmov™
8. Eaton DSFi
3. Eaton SPDi
6. Eaton SPD50NGi
9. Eaton CSFi
10. Eaton PSFi
4. Eaton SPDV60/T60
7. Eaton ESFi
11. Eaton SF8RM
1. Series Power and Noise Filter with Shunt Surge
Diverter 3 Phase, 100-800A, 80-240kA
6. Neutral-Earth or Earth-Earth
Equipotential Clamp 50kA
10. Portable Surge Filter, 1 Phase 10A &
16A, 25kA Primary and 140kA Primary
2. Shunt Surge Diverter, 3 Phase 200kA
7. Series filter with Shunt Surge Diverter
Class II/Cat C & B, 1 & 3 Phase 63-80A,
100kA Series Surge Filters
11. Single Phase Rack
Mounted Filter /PDU
3. Shunt Surge Diverter, 1 and 3 Phase, 40kA and 100kA
4. Shunt Surge Diverter, 1 Pole 60kA
5. Integrated Surge Protection Device
(Internally HRC Fused) 1 Pole 60kA
64
That's why surge protection is so critical. And why Eaton builds so much
quality into our full line of surge protection products. Eaton has a world
beating reputation for Power Quality and a full range of surge protection
solutions, covering every eventuality.
8. Series Filter with Shunt Surge
Diverter, 1 Phase 5-32A, 40kA Primary
9. Series Filter with Shunt Surge
Diverter, 1 Phase 3-25A, 25kA Primary
EATON CORPORATION UPS and Power Quality Products Catalogue
Power Conditioners
Sola Power Conditioners
Eaton's Sola ferroresonant products are proven technology. In 1938,
Sola was awarded the first patent for ferroresonant power conditioners:
the constant voltage transformer. Since then, our technology has
remained at the forefront of ferroresonant power conditioning.
Today, Eaton's Sola ferroresonant power conditioners supply sinewave
output, which is especially important for computer applications.
Whether you purchase a model 200, 210 or 26 voltage regulator, you can
count on an average of 25 years service from your unit.
Every ferroresonant power conditioner is manufactured to exacting
specifications and is subject to rigorous quality control.
The ferroresonant power conditioners protect equipment from all power
problems, other than the complete loss of power. They excel at tightly
regulating the voltage, providing superior noise attenuation and are
ruggedly designed to withstand the harshest electrical environments.
Possessing no moving parts, ferroresonant power conditioners are
virtually maintenance free.
What is Ferroresonance?
Simply put, ferroresonance is the property of a transformer design in
which the transformer contains two (2) separate magnetic paths with
limited coupling between them. The output contains a parallel resonant
tank circuit and draws power from the primary to replace the power
delivered to the load.
Note that "resonance" in ferroresonance is similar to that in linear
circuits with series or parallel inductors and capacitors, where the
impedance peaks at a particular frequency. In a non linear circuit,
such as a ferroresonant transformer, "resonance" is used to reduce
the changes in supply voltage and provide more constant voltage to
the load.
A magnetic device is non linear. Its reluctance changes abruptly above
a certain magnetic flux density. At this point, the magnetic device is
defined as being in saturation.
The design of the ferroresonant transformer allows one magnetic path
to be in saturation, while the other is not. As a result, further change in
the primary voltage will not translate into changes in the saturated, or
secondary voltage, and voltage regulation results.
Typical Model 200 or 210 Performance
Features and Benefits
• Superior Low Line Performance
Specified performance is maintained for all loads 0 - 100% of nominal
rating
• Switchmode Computer Load Compatibility
Able to support typical computer loads when input supply mains
voltage is 50% below nominal
• 240 Volt, 230 Volt or 220 Volt Models
Separate models to suit different nominal supplies or particular nominal
output voltage requirements
• 200% Overload Rated
Suitable for use with computer start up overloads. Units are output
short circuit proof
• On Site Configuration
7.5 to 18kVA units can be site configured as Single Phase or Three
Phase operation, if required
• Selectable Voltages
Hardwired 26 Series units have selectable input and output voltages
• 5 Year Warranty
Exceptional MTBF (Mean Time Between Failure), an optimum
combination of performance to cost effective power conditioning
www.eaton.com/powerquality 1300 UPS UPS
65
500VA to 2500VA Portable Power Conditioners
Sola 200/210
Designed and manufactured in Australia, the Sola 200/210 portable
power conditioner provides smooth stepless control of output voltage to
your computer or electronic system, whilst attenuating harmful impulses,
surges and other power line disturbances.
The Sola 200/210 incorporates improved surge withstand capabilities,
as specified by ANSI/IEEE C62.41-1980 and is covered by the SECV
Certificate of Suitability Number CS84292V.
Built to protect
• Programmable logical controls (PLC)
• Photographic equipment
• Remote computer peripherals
• Copiers and laser printers
• Process control equipment
• CNC machinery
• Entire installations
Specifications
Ordering details
Input
240 Volt In/Out
Voltage:
220 or 240 Volt AC
Frequency:
50 Hz
Input Voltage Range:
+ 10%, -20% (±40%)
Protection:
ANSI/IEEE C62.41-1980 A and B waveforms
suppressed to safe levels.
Output
Nominal Voltage:
220 or 240 Volt AC
Frequency:
50 Hz
Voltage Regulation:
±3% for +10%, -20% input. +5%, -8% for ±40%
input.
Control:
AC on/off switch
Power Efficiency:
90%
Response/Correction
Time:
Return to regulation envelope within 30 msec.
Dynamic Response:
Continuous and smooth correction for input
voltage fluctuations.
Overloads
200% of rated load for 10 seconds without
damage. 500% of rated load for 10 msec.
Rated
Output
VA
Current
AMPS
(Cont.)
Output
Receptacles
Weight
(kg)
Enclosure
Size (Note
3)
500
210-26-650-00
2.08
2
23
3
1000
210-26-710-00
4.16
3
36
4
2000
210-26-720-00
8.33
3
55
4
2500
210-26-725-00*
10.41
3
66
4
220 Volt In/Out Hardwired Units
Rated
Output VA
Part
Number
Current
AMPS (Cont.)
Weight (kg)
Enclosure
Size (Note 3)
500
200-44-650
2.27
23
3
1000
200-44-710
4.55
36
4
2000
200-44-720
9.09
55
4
2500
200-44-725
11.36
66
4
Notes:
1.
240 Volt Hardwired options available to order
Electrical Noise Attenuation
2.
Special voltage configurations available to order
Transverse Mode:
60 dB typical, (80 dB max.) 4kHz to 20 MHz
3.
Enclosure sizes (mm)
Common Mode:
120 dB typical, (140 dB max.) 2kHz to 1 MHz
Output Harmonic
Distortion
Less than 3% THD on linear loads.
No greater than 5% on typical computer loads.
4.
* Input lead fitted with 15 Amp plug top (all other units fitted with 10 Amp
plug tops)
5.
Specific input leads and output sockets can be fitted to order
Operating Ambient:
-20ºC to +50ºC
Relative Humidity:
0 to 95% non-condensing
Ventilation:
Natural Convection Cooled
Status Indication
Power On:
Amber lamp
Overload Protection
Output short circuit protection
Warranty
5 years
Size 3: 195 (H) x 210 (W) x 328 (D)
Size 4: 252 (H) x 280 (W) x 421 (D)
Environmental
66
Part Number
EATON CORPORATION UPS and Power Quality Products Catalogue
3kVA to 22kVA Power Conditioners
Sola 200
The extension of Sola ferroresonant power conditioners continues
through to 22kVA. These units are mostly suited to hardwired, fixed
installation applications for providing smooth stepless control of the
output voltage, attenuation of harmful impulses or surges and other
power line disturbances. Sola 200 power conditioners are ideally
suited to provide protection in computer rooms, regulation for scientific
instrumentation, plus protection and regulated power to sophisticated
computer based factory process equipment. To simplify installation, all
units are free standing and fitted with castors (excluding 22kVA) and
jacking feet. Connections are provided at the rear via a base plate cable
entry to an isolation switch.
The flexibility of Sola 200 power conditioners is increased on units
between 7.5kVA and 18kVA. These units can be field configured for
single phase or three phase operation. Sola 200 power conditioners (3 to
22kVA) incorporate approved surge withstand capabilities, as required
by ANSI/IEEE C62.41-1980.
Specifications
Input
Voltage:
220, 230 or 240 Volt AC (Refer “Ordering
Details” for configuration options)
Frequency:
50 Hz
Input Voltage Range:
+ 10%, -20% (±40%)
Protection:
ANSI/IEEE C62.41-1980 A and B
waveforms suppressed to safe levels.
Built to protect: Remote computer peripherals, copiers and laser
printers, process control equipment, CNC machinery, programmable
logical controls (PLC), photographic equipment and entire installations.
Ordering details
Part Number
Configuration
Weight
(kg)
Enclosure
Size (Note 5)
Nominal Voltage:
220 or 240 Volt AC
Rated
Output
kVA
Frequency:
50 Hz
3
200-26-730
1 Phase only
100
1
Voltage Regulation:
±3% for +10%, -20% input. +5%, -8% for
±40% input.
3
200-26-730-00**
1 Phase only
100
1
Control:
AC on/off switch
5
200-26-750
1 Phase only
155
2
5
200-26-750-HO***
1 Phase only
155
2
7.5
200-26-775****
1 or 3 Phase
215
2
9
200-26-790****
1 or 3 Phase
270
2
200-26-812M****
1 or 3 Phase
360
3
Output
Power Efficiency: 90%
Response/Correction
Time:
Return to regulation envelope within 30
msec.
Dynamic Response:
Continuous and smooth correction for
input voltage fluctuations.
12
15
200-26-815****
1 or 3 Phase
420
3
Overloads
200% of rated load for 10 seconds without
damage. 500% of rated load for 10 msec.
18
200-26-818****
1 or 3 Phase
520
3
22.5
200-46-822****
3 Phase only
595
4
Electrical Noise Attenuation
Transverse Mode:
60 dB typical, (80 dB max.) 4kHz to 20 MHz
Common Mode:
120 dB typical, (140 dB max.) 2kHz to 1
MHz
Output Harmonic
Less than 3% THD on linear loads.
Distortion
No greater than 5% on typical computer
loads.
Environmental
Operating Ambient:
-20ºC to +50ºC
Relative Humidity:
0 to 95% non-condensing
Ventilation:
Natural Convection Cooled
Notes:
1. * For units with nominal Ph-N voltage of 220V specify 44 (as in 200-44-730)
for 3-18kVA units and 24 (as in 200-24-822) for 22.5kVA model. For units
with nominal Ph-N voltage of 230V specify 25 for 3-18kVA units and 35 for
22.5kVA.
2. ** Units fitted with WIP 15 plug and 4 x 10/15 Amp screw sockets
3. *** Units fitted with input terminal block and 4 x 10/15 amp screw sockets
4. To avoid nuisance tripping of input circuit breakers, we recommend the use
of "D" curve or motor start type circuit breakers. Current rating should be at
least one size larger than input current stated on unit
data plate. See manual or consult your sales representative for
further details.
5. Enclosure Sizes (mm): Size 1: 600 (H) x 400 (W) x 440 (D)
Status Indication
Power On:
Amber lamp
Overload Protection
Output short circuit protection
Warranty
5 years
Size 2: 995 (H) x 525 (W) x 550 (D)
Size 3: 990 (H) x 800 (W) x 550 (D)
Size 4: 1236 (H) x 800 (W) x 550 (D)
6. **** 3 Phase loads to be star connected only. Power Conditioners NOT to be
used for Delta loads.
www.eaton.com/powerquality 1300 UPS UPS
67
Multi-Voltage, Hardwired Power Conditioners for Industrial Applications
Multi-Voltage,
Hardwired Power Conditioners for Industrial Applications
Sola
26 Multivolt
Frequently, power transformers are incorporated with process
equipment to provide specific voltages for sensitive equipment.
Unfortunately, outside interferences will vary the output from these
transformers, causing the sensitive equipment to malfunction or
fail. The Sola 26 range of power conditioners provide an immediate
answer to this inconvenience, by suppressing and isolating power
line interference and regulating the output voltage to ±5%. These
hardwired power conditioners provide the unique feature of selectable
input tap for greater versatility and output voltage taps are also
provided. These features make the Sola 26 power conditioner the ideal
choice for a regulated power supply where a three phase source is
provided without a neutral line.
The Sola 26 power conditioner provides superior noise rejection,
exceeding 120 dB common mode and 60 dB transverse mode noise
rejection. By nature of design, this product is a true, ultra isolation
device. The Sola 26 is available from 500VA through to 15kVA as a panel
mounting, hardwired unit.
specifications
Built to protect
Input
Voltage:
500-5000VA Models: Field selectable
110/120V or 220/240 or 380/415V
7.5-15kVA Models: Field selectable
220/240V or 380/415V
Frequency:
50 Hz
• Remote computer peripherals
• Copiers and laser printers
• Process control equipment
• CNC machinery
• Programmable logical controls (PLC)
• Photographic equipment
Output
• Entire installations
Voltage:
Field Selectable - 110/120/220/240
Volts AC
Voltage Regulation:
± 5% for an input line variation of
±15%. + 5%, -8% for ± 40% input.
Output Harmonic Distortion
Less than 3% THD on linear loads. No
greater than 5% on typical computer
loads.
Efficiency
85% at full load.
Dropout
No loss of output for line loss of 3
msec.
Electrical noise rejection
Ordering details
Rated
Output
VA
Part Number
Height
(H) (mm)
Width
(W)
(mm)
Length
(L)
(mm)
Weight
(kg)
500
2605-0500M
162
200
362
18
1000
2605-1000M
170
200
460
28
2000
2605-2000M
244
288
467
51
3000
2605-3000M
244
288
501
73
Transverse Mode:
> 60 dB
5000
2605-5000M
244
288
736
110
Common Mode:
> 120 dB
*10000
2605-10kM
244
630
736
221
Operating temperature
-20ºC to +50ºC
*15000
2605-15kM
244
987
736
350
Warranty
5 years
Typical Single Module Arrangement
68
EATON CORPORATION UPS and Power Quality Products Catalogue
Support
Tools and Programs Available
Power Quality Sales Web
PQ Salesweb is a password-protected website that contains Power Quality product
information for Eaton channel partners of Eaton's power quality product portfolio. The
website has news, product information, marketing and sales tools you can benefit from in
your daily Eaton sales.
To register go to website www.pqsalesweb.eaton.com
Access is granted upon approval of registration.
Eaton’s PowerAdvantage rewards program
Bigger rewards. Better support.
Eaton’s PowerAdvantage rewards program is an easy to use points based program which gives you
access to a selection of over 3,000 fantastic products and experiences.
How does it work?
It’s easy. The more Eaton products you sell, the more points you earn and the closer you get to some
great rewards!
For more information once registered, login to powerquality.eaton.com/pp/login.asp?cx=22 click on
Eaton Salesweb and then rewards program quicklink to access website.
To register go to website www.powerquality.eaton.com and click on icon
Please allow some time for your access to be granted
ANZ Designer Tool-kit
Eaton’s Designer Tool-Kit is a valuable online resource for consultants where you’ll find
specifications for our Electrical Power Quality equipment. If you’re running a project
based around one of our UPS systems, our Designer Tool-Kit will help you plan it.
To register go to website www.powerquality.eaton.com click on icon
NATSPEC
NATSPEC manages a comprehensive national specification system endorsed by government and
professional bodies. NATSPEC, the National Building Specification, is for all building structures with
specialist packages for architects, interior designers, landscape architects, structural engineers,
service engineers and domestic owners. AUS-SPEC is the Local Government specification system
for the life-cycle management of assets. Packages include Urban and Open Space, Roadworks and
Bridges, Public Utilities, and Maintenance. NATSPEC is also responsible for the National BIM Guide
and its associated documents. Eaton is an approved NATSPEC Partner.
To download Eaton’s branded worksection www.natspec.com.au/Products_Services/branded_ws.asp
A branded worksection is a technical worksection produced in NATSPEC format in conjunction with
Eaton. Branded worksections provide specifiers with an alternative to the generic worksection where
a particular product has been selected at the design stage.
www.eaton.com/powerquality 1300 UPS UPS
69
Notes
70
EATON CORPORATION UPS and Power Quality Products Catalogue
Eaton is dedicated to ensuring that reliable, efficient and safe power is available
when it’s needed most. With unparalleled knowledge of electrical power management
across industries, experts at Eaton deliver customised, integrated solutions to solve
our customers’ most critical challenges.
Our focus is on delivering the right solution for the application. But, decision makers
demand more than just innovative products. They turn to Eaton for an unwavering
commitment to personal support that makes customer success a top priority. For
more information, visit www.eaton.com/electrical.
Eaton ANZ support footprint
DARWIN
CAIRNS
TOWNSVILLE
MT ISA
GLADSTONE
BRISBANE
CANBERRA
PERTH
NEWCASTLE
ADELAIDE
SYDNEY
AUCKLAND
MELBOURNE
SALES
MANUFACTURING
SERVICE
TAS
LAUNCESTON
HOBART
WELLINGTON
CHRISTCHURCH
24 Hour Emergency Service Hotline
AUST 1300 303 059
NZ 0508 697 378
Eaton Australia:
Eaton Sales 1300 877 877
Eaton Service 1300 303 059
Eaton New Zealand:
Eaton Sales 0508 328 6669
Eaton Service 0508 697 378
Eaton Industries Pty. Ltd.
Electrical Sector
10 Kent Road Mascot,
NSW 2020 Australia
1300 UPS UPS (1300 877 877)
www.eaton.com/powerquality
Eaton Industries Company
Electrical Sector
First Floor, Enable House,
106 Wrights Road, Addington,
Christchurch 8041 NZ
0508 EATON NZ (0508 328 6669)
www.eaton.com/powerquality
Due to continual product improvement, specifications
are subject to change without notice.
Printed in AUS. 808PQ
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement