Kevin-pc\manual working\ETX\701\EmETX-i701-ins

Kevin-pc\manual working\ETX\701\EmETX-i701-ins
Quick Installation Guide
Version 1.0
EmETX-i701
Low Voltage Pentium M 1.1 GHz ETX CPU
Module with VGA/LCD, Audio & LAN
EmETX-i702
Low Voltage Pentium M 1.4-1.7 GHz ETX
CPU Module with VGA/LCD, Audio & LAN
Part Number:4041070100100
Copyright © 2002
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequen-tial damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of
such damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
About this Quick Installation
This Quick Installation provides general information and installation instructions
about the product. This Quick Installation is intended for experienced users
and integrators with hardware knowledge of personal computers. If you are
not sure about any description in this Quick Installation, please consult your
vendor before further handling.
2
EmETX-i701/i702 Quick Installation
Warning
Single Board Computers and their components contain very delicate
Integrated Circuits (IC). To protect the Single Board Computer and its
components against damage from static electricity, you should
always follow the following precautions when handling it :
1. Disconnect your Single Board Computer from the power source when you
want to work on the inside
2. Hold the board by the edges and try not to touch the IC chips, leads or
circuitry
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that came
with the Single Board Computer, whenever components are separated
from the system
5. It possibly needs BIOS support in the case of using special backplane,
otherwise, it might be not able to function completely.
Technical Support
If you have any technical difficulites, please consult the user's manual first
at:
ftp://ftp.arbor.com.tw/pub/install
Please do not hesitate to call or e-mail our customer service when you still
can not find out the answer.
http://www.arbor.com.tw
E-mail:[email protected]
EmETX-i701/i702 Quick Installation
3
Specifications
System
•Form Factor: ETX form factor (ETX module)
•CPU: Intel Pentium M Micro-FCBGA Package 1.1GHz
(i701) or 1.4~1.7GHz
(i702), 1MByte L2 cache on die
•BIOS: Award BIOS
•Chipset: Intel 855GME, 400MHz
•Super I/O: Winbond W83627HF
• Display Controller:
-
FSB, graphics integrated
Intel Extreme Graphics 2 Controller, LVDS Flat panel and CRT output
Up to 64Mbyte of dynamic Video RAM
Support 2D/3D graphics
Support dual display
Improved hardware motion compensation for MPEG2
• LCD
Support:
- Max. CRT QXGA 2048 x 1536
- Max. LCD UXGA 1600 x 1200
- 48bits Dual Channel LVDS
•Memory: DDR SODIMM Support DDR 200/266/333, 1GB Max.
• LAN Chipset:
- Chipset: Intel 82562EZ
- Interface: IEEE 802.3U compatible 10 Base-T / 100 Base-TX interface includes
software driver and boot ROM function
• Audio
Function:
- AC97 controller v.2.2 compliant interface
- Audio interface: Microphone in; Line in; Speaker out
•Watchdog Timer:
Multiple I/O
•IDE Interface (on
0 ~ 255sec/min, (W83627HF)
the carrier board): Intel 82801DB (ICH4) builtin
IDE interface support 2 IDE ports and up to four devices, Ultra
DMA 100
•Serial (on the carrier board): 2 x RS-232C port (COM1/2)
•Parallel (on the carrier board): 1 x parallel port supports SPP/EPP/ECP
mode share with floppy
•USB: 4 USB v2.0 ports
• K/B & Mouse (on the carrier
board): One keyboard & mouse port
support
•IrDA
4
(on the carrier board): One IrDA port support
EmETX-i701/i702 Quick Installation
• Real Time Clock: RTC
• Firmware Hub: 4MB
Environment & Power Consumption
• Power Requirement: +5V/3.6A
•Power Consumption: Typical: 18W @ 5V (1.1GHz LV
• Operating Temperature: 0 ~ 60° C
• Storage Temperature: -30 ~ 85°C
• Operative Humidity: 5% ~ 95% (non condensing)
Mechanical
•Dimension (L x W): 114 x 95 mm (4.5" x 3.7")
•Weight: 85grams (0.19 Ib)
EmETX-i701/i702 Quick Installation
CPU)
5
Packing list
Before you begin installing your single board computer, please make sure that
the following materials have been shipped:
> 1 x EmETX-i701 ETX CPU module
OR
1 x EmETX-i702 ETX CPU module
> 1 x Quick Installation Guide
> 1 x CD driver
> 1 x Warranty Card
Ordering Codes
EmETX-i701/PM1100 Intel Pentium M 1.1GHz ETX Module
EmETX-i702
Intel Pentium M 1.4~1.7GHz ETX Module
PBE-1000
ATX form factor evaluation board for ETX modules
Heat Sink w/fan for EmETX-i701
Heat Sink w/fan for EmETX-i702
CPU:
Pentium-M 1.4GHz (µFCPGA 478pin)
Pentium-M 1.6GHz (µFCPGA 478pin)
Pentium-M 1.7GHz (µFCPGA 478pin)
6
EmETX-i701/i702 Quick Installation
Board Layout Top View (Front)
DDR SODIMM
ICH4
CPU
INTEL 855
GME
EmETX-i701/i702 Quick Installation
7
Board Layout Top View (Back)
8
ETX4
ETX2
ETX3
ETX1
EmETX-i701/i702 Quick Installation
Board Dimension
UNIT: mm
EmETX-i701/i702 Quick Installation
9
Jumper/Connector Quick Reference
Connectors
Lable
Function
ETX1
PCI Bus, USB, Audio
ETX2
ISA Bus
ETX3
VGA,LCD,Video,COM1,COM2,LPT,IrDA,KB/MS
ETX4
IDE1,IDE2,Ethernet,Miscellaneous
10
EmETX-i701/i702 Quick Installation
ETX Connector
ETX2
ETX1
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND
PCICLK3
GND
PCICLK1
REQ#3
GNT#2
REQ#2
REQ#1
GNT#0
VCC
SERIRQ
AD0
AD1
AD4
AD6
CBE#0
AD8
GND
AD10
AD11
AD12
AD13
AD14
AD15
CBE#1
VCC
PAR
PERR#
PME#
LOCK#
TRDY#
IRDY#
FRAME#
GND
AD16
AD17
AD19
AD20
AD22
AD23
AD24
VCC
AD25
AD28
AD27
AD30
PCIRST#
INTR#C
INTR#A
GND
GND
PCICLK4
GND
PCICLK2
GNT#3
VCC3
GNT#1
VCC3
N.C
VCC
REQ#0
VCC3
AD2
AD3
AD5
AD7
AD9
GND
AUXAL
MIC
AUXAR
ASVCC
SNDL
ASGND
SNDR
VCC
SERR#
N.C
USB2DEVSEL#
USB3STOP#
USB2+
GND
CBE#2
USB3+
AD18
USB0AD21
USB1CBE#3
VCC
AD26
USB0+
AD29
USB1+
AD31
INTR#D
INTR#B
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND
SD14
PCICLK3
SD13
GND
SD12
PCICLK1
SD11
REQ#3
SD10
GNT#2
SD9
REQ#2
SD8
REQ#1
MEMW#
GNT#0
MEMR#
VCC
LA17
SERIRQ
LA18
AD0
LA19
AD1
LA20
AD4
LA21
AD6
LA22
CBE#0
LA23
AD8
GND
SBHE#
AD10
SA0
AD11
SA1
AD12
SA2
AD13
SA3
AD14
SA4
AD15
SA5
CBE#1
VCC
SA6
PAR
SA7
PERR#
SA8
PME#
SA9
LOCK#
SA10
TRDY#
SA11
IRDY#
SA12
FRAME#
GND
SA13
AD16
SA14
AD17
SA15
AD19
SA16
AD20
SA18
AD22
SA19
AD23
IOCHRDY
AD24
VCC
SD0
AD25
SD2
AD26
SD3
AD27
DREQ2
AD30
SD5
PCIRST#
SD6
INTR#C
IOCHK#
INTR#A
GND
EmETX-i701/i702 Quick Installation
GND
SD15
MASTER#
DREQ7
DACK#7
DREQ6
DACK#6
DREQ5
DACK#5
DREQ0
DACK#0
IRQ14
IRQ15
IRQ12
IRQ11
IRQ10
IO16#
GND
M16#
OSC
BALE
TC
DACK#2
IRQ3
IRQ4
VCC
IRQ5
IRQ6
IRQ7
SYSCLK
REFCH#
DREQ1
DACK#1
GND
DREQ3
DACK#3
IOR#
IOW#
SA17
SMEMR#
AEN
VCC
SMEMW#
SD1
NOWS#
SD4
IRQ9
SD7
RSTDRV
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
11
ETX Connector
ETX3
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
12
GND
R
HSY
VSY
N.C/DE
TX2CLK#
TX2CLK+
GND
TX2D1+
TX2D1#
GND
TX1D3#
TX1D3+
GND
TX1D2#
TX1D2+
GND
TX1D0+
TX1D0#
VCC
N.C.
N.C
BIASON
N.C
N.C
N.C
VCC
STB#
I.C
IRRX
IRTX
RXD2
GND
RTS#2
DTR#2
DCD#2
DSR#2
CTS#2
TXD#2
RI#2
VCC
RXD1
RTS#1
DTR#1
DCD#1
DSR#1
CTS#1
TXD#1
RI#1
GND
ETX4
GND
B
G
DDCK
DDDA
TX2D3#
TX2D3+
GND
TX2D2+
TX2D2#
GND
TX2D0+
TX2D0#
GND
TX1CLK+
TX1CLK#
GND
TX1D1+
TX1D1#
VCC
N.C
BLON
DIGON
N.C
N.C
N.C
GND
AFD#
PD7
ERR#
PD6
INIT#
GND
PD5
SLIN#
PD4
PD3
PD2
PD1
PD0
VCC
ACK#
BUSY#
PE
SLCT#
MSCLK
MSDAT
KBCLK
KBDAT
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND
SV_SB
PS_ON
PWRBTN#
N.C
WDTOUT
ROMKBCS#
N.C
VCC
OVCR#
EXTSMI#
SMBCLK
SIDE_CS3#
SIDE_CS1#
SIDE_A2
SIDE_A0
GND
PD33/66 SEL
SIDE_A1
SIDE_INTRQ
SD33/66 SEL
SIDE_ACK#
SIDE_RDY
SIDE_IOR#
VCC
SIDE_IOW#
SIDE_DRQ
SIDE_D15
SIDE_D0
SIDE_D14
SIDE_D1
SIDE_D13
GND
SIDE_D2
SIDE_D12
SIDE_D3
SIDE_D11
SIDE_D4
SIDE_D10
SIDE_D5
VCC
SIDE_D9
SIDE_D6
SIDE_D8
RING IN
RXDRXD+
TXDTXD+
GND
GND
PWGIN
SPEAKER
BATT
LILED
ACTLED
SPEEDLED
12CLK
VCC
GPCS#
12DAT
SMBDAT
CPUFAN
DASP#
PIDE_CS3#
PIDE_CS1#
GND
PIDE_A2
PIDE_A0
PIDE_A1
N.C
PIDE_INTRQ
PIDE_ACK#
PIDE_RDY
VCC
PIDE_IOR#
PIDE_IOW#
PIDE_DRQ
PIDE_D15
PIDE_D0
PIDE_D14
PIDE_D1
GND
PIDE_D13
PIDE_D2
PIDE_D12
PIDE_D3
PIDE_D11
PIDE_D4
PIDE_D10
VCC
PIDE_D5
PIDE_D9
PIDE_D6
WOL
PIDE_D8
SIDE_D7
PIDE_D7
HDRST#
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
EmETX-i701/i702 Quick Installation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement