Planar PX2230MW UG

Planar PX2230MW UG
PX2230MW
LCD Touch Monitor
USER'S GUIDE
www.planar.com
Content
Operation Instructions...................................................................................................................................................1
Unpacking Instructions .................................................................................................................................................2
Safety Precautions...........................................................................................................................................................2
Front View of the Product ............................................................................................................................................3
Rear View of the Product ..............................................................................................................................................4
Quick Installation .............................................................................................................................................................5
Basic Operation and Calibration/Reset Instructions...........................................................................................6
Advanced Operation—OSD Menu............................................................................................................................8
Supporting Timing Modes ........................................................................................................................................ 11
Technical Information ................................................................................................................................................. 12
Wall-Mount Installation Instructions..................................................................................................................... 13
Troubleshooting................................................................................................................ ........................................... 14
Product Registration and Technical Support..................................................................................................... 15
1
Operation Instructions
Thank you for purchasing the PX2230MW multi-touch LCD monitor. Please read this guide
thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This TFT LCD Monitor has been tested and found compliant with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This TFT Touchscreen LCD
Monitor generates, uses, and can radiate radio frequency energy. Harmful interference to radio
communication may be the result if it‘s not properly installed and used. However, there is no
guarantee that interference will not occur in a particular installation. If this TFT Touchscreen LCD
Monitor does cause serious interference to radio or television reception, resetting may correct it.
Moreover, users are encouraged to reduce interference by doing one or more of the following:
 Reorient or relocate the receiving antenna.
 Move the TFT Touchscreen LCD Monitor and the receiver further away from each other.
 Connect the TFT Touchscreen LCD Monitor into an outlet on a circuit
erent from that to
which the receiver is connected.
 Consult your local dealer or a
ed technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
TFT Touchscreen LCD Monitor would void the user‘s authority
to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
Important Recycle Instructions:
Lamp(s) inside this product contain mercury. This product may contain other
electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in
accordance with local, state, or federal Laws. For more information, contact the Electronic
Industries Alliance at WWW.EIAE.ORG. For lamp
disposal information check
WWW.LAMPRECYCLE.ORG.
According to WEEE regulation, this TFT Touchscreen LCD Monitor can't be handled as normal trash
in Europe when it is out of usage. Please refer to the recycle information on Planar’s website to
handle it.
1
Unpacking Instructions
 Move the LCD out of the package and take
the plastic bag and Polystyrene Foam.
 Pull the base from Parallel versus Panel to Vertical.
 Adjust the Panel between 0° leaning forward and 20° leaning backward.
Safety Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:

 Touch screen surface may be cleaned using a soft clean clothmoistened with mild
window glass commercialcleaners or 50/50 mixture of water and isopropyl alcohol.
 Use a soft cloth moistened with mild detergent to clean the display housing.
 Disconnect the power plug from AC outlet if the product is not going to be used for
an extended period of time.
Don’t:
 Do not touch the LCD Display screen surface with sharp or hard objects.
 Do not use abrasive cleaners, waxes or solvents for your cleaning.
 Do not operate the product under the following conditions:
o Extremely hot, cold or humid environment.
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic
o In direct sunlight.
 If smoke, abnormal noise or odor emits from your TFT Touchscreen LCD Monitor, remove the
power cord immediately and call your service center.
 Never remove the rear cover of your TFT Touchscreen LCD Monitor. The display unit inside
contains high-voltage parts and may cause electric shock.
 Never try to repair your TFT Touchscreen LCD Monitor yourself. Always call your service center
or a
technician to
2
Front View of the Product
① ② ③ ④ ⑤⑥
①
OSD Turn On/ O
②
Volume Adjust/ Scroll Down/ Adjust Decrease
③
Preset Mode/ Scroll UP/ Adjust Increase
④
Input select/ C
⑤
Power On/ O
⑥
LED Indicator
Selection
3
Rear View of the Product
⑦
⑦
Power Input
⑧
Audio Input
⑨
DVI Input (DVI 24 pin)
⑩
VGA Input (D-Sub 15 pin)
⑪
USB – Type A to B
⑧
4
⑨
⑩
⑪
Quick Installation
1. Connect either VGA or DVI Video Source from the monitor to the computer. Make sure
both monitor and computer are powered OFF.
2. Connect the power cord to a properly grounded AC outlet,then to the monitor.
3. Power-ON computer and then POWER-ON the monitor
4. Set the timing mode on your computer. Recommended resolution and refresh rate is
1920 x 1080 @ 60Hz.
Figure 1:
PC
USB
Power cable
DVI cable
Audio cable
5
VGA cable
Basic Operation and Calibration/Reset Instructions
Before using the TFT Touchscreen LCD Monitor:
 Connect external equipment properly.
 Insert the power plug, and the power LED indicator will light orange.
To turn the TFT Touchscreen LCD M
:
Press POWER button on the front. The power LED indicator light will be blue when the TFT
Touchscreen LCD Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the TFT Touchscreen
LCD Monitor.
1
2
▼
▲
▼+▲
Displays main menu
Exits from OSD menu
Selects between VGA, DVI or Auto mode
Select the desired item when in OSD menu
When not in OSD menu, directly enters Volume adjust
Select the desired item when in OSD menu
When not in OSD menu, directly enters Preset Mode
Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When TFT Touchscreen LCD Monitor is in normal mode, the “OSD Lock Out” function can be
enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1 button and the ▲ button for 10 seconds to lock the OSD buttons.
The TFT Touchscreen LCD Monitor will show an “OSD Lock Out” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.
6
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the 1 button and the ▼ button for 10 seconds to lock all 5 buttons.
The TFT Touchscreen LCD Monitor will show a “Lock Out” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.
PX2230MW Calibration/Reset Instructions:
The PX2230MW is available with USB connection. It is Microsoft® Windows® 7
HID (Human Interface Device) compatible if you use the USB touch screen interface. No
additional software driver is required. Calibration is a simple process and can be invoked by
running Tablet PC Settings from Control Panel and clicking the Calibrate button.
Click the Reset button to reset the touchscreen to the factory calibration settings. To reset the
existing calibration data, click "Reset" in the Tablet PC Settings window.
7
Advanced Operation—OSD Menu
You can use the OSD menu to adjust various settings for your TFT Touchscreen LCD Monitor.
Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu.
Short Cuts Function from the button(s)
Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine
Tune) and Clock (H. Size) of the screen.
Contrast: To adjust the foreground white level of screen image.
▲: increase contrast, ▼: decrease contrast.
Brightness: To adjust the luminance of the video.
▲: increase brightness, ▼: decrease brightness.
ECO Mode: Allows the user to turn the ECO On or O . Contrast and Brightness
adjustment disabled when ECO is active.
Input Select: When Input Select is pressed, change Input signal to VGA, DVI, HDMI or
Auto.
Audio Adjust: To adjust the audio functions.
Volume: To adjust the volume of speaker output.
Mute: To turn the Mute ON/OFF.
8
Color Adjust: To select the color for improving brightness and color saturation
between 9300K, 6500K, 5400K, and User Color.
9300K: Adds blue to screen image for cooler white.
6500K: Adds red to screen image for warmer white and richer red.
5400K: Adds green to screen image for a darker color.
User Color: Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press ▼ or ▲ button to adjust selected color.
Information: To display the information, regarding the current input signal coming
from the graphic card in your computer.
Note: See your graphic card user guide for more information about changing the
resolution and refresh rate.
Manual Image Adjust: To manually adjust the Horizontal Size, H. /V. position, Fine Tune,
Sharpness, Video Mode adjust and Preset Mode.
Horizontal Size: To adjust the width of the screen image.
▼: decrease the width of screen image, ▲: increase the width of screen image.
H./V. Position: To adjust the horizontal and vertical position of the video.
H. Position: ▲: move screen to the right, ▼: move screen to the left.
V. Position: ▲: move screen up, ▼: move screen down.
Fine Tune: To adjust the delay time of data and clock.
Press ▼ or ▲ to adjust to your preference.
Sharpness: To adjust the clarity of a non-Full HD Resolution (1920x1080) signal with ▼
or ▲ button.
Video Mode Adjust: To select the video mode from Full Screen, Over Screen.
Full Screen: To select full-screen size image.
Over Screen: To select over-screen size image.
Preset Mode: Provides an optimum display environment depending on the contents
displayed. It contains 5 user-selectable presets.
Standard is for general windows environment and monitor default setting.
Game optimized for PC game environment.
Cinema optimized for movie and video environment.
Scenery optimized for displaying outdoor scenery images.
Text optimized for text editing and viewing in a word processing environment.
Setup Menu: To set up Language, OSD Position, OSD Time Out and OSD Background.
9
Language Select: To allow users to choose from available languages.
OSD Position: Press ▼ or ▲ button to select between horizontal and vertical OSD
Position adjustment.
H. Position: To horizontally adjust the OSD position.
▲: move OSD to the right, ▼: move OSD to the left.
V. Position: To vertically adjust the OSD position.
▲: move OSD up, ▼: move OSD down.
OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period
of time.
OSD Background: Allows the user to turn the OSD background On or Off.
Memory Recall: To recall factory settings for Video & Audio controls.
Press button 2 to select the Memory Recall menu option.
10
Supporting Timing Modes
STANDARD
VGA
VGA
MAC
VESA
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
CVT
VESA
VESA
VESA
RESOLUTION
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
1280 x 960 @ 60Hz
1152 x 864 @ 75Hz
1152 x 870 @ 75Hz
1280 x 1024 @ 60Hz
1280 x 1024 @ 75Hz
1440 x 900 @ 60Hz
1400 x 1050 @ 60Hz
1600 x 1200 @ 60Hz
1680 x 1050 @ 60Hz
1920 x 1080 @ 60Hz
Note:
1. DVI supports 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p.
2. Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings.
Similar PC Timing on list below:
720 x 400 @ 70Hz / 640 x 400 @ 70Hz
1400 x 1050 @ 60Hz / 1680 x 1050 @ 60Hz
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to your monitor.
11
Technical Information
LCD Panel
21.5” TFT
Power Management
On: 48 Watts (maximum)
Standby Mode: < 1 Watt
O : < 1 Watt
Displayable Resolution
Full HD 1920 x 1080 max. Vertical Frequency 60Hz max.
Pixel Dimension
0.24825 x 0.24825 mm
LCD Display Color
16.7M
Tilt
5° (+0/-2) ~ 36° (+/-2)
Active Display Area
476.64 mm x 268.11 mm
Temperature
Operating: 0°C ~ +40°C
Storage: -20°C ~ + 60°C
Compliance
FCC-B, CE, cTUVus, TÜV/Bauart
Power
Input Voltage AC100-240 V
Speaker
1W x 2
Touchscreen Technology
Optical Touch
Touchscreen Interface
USB
Touch Method
Finger(s) and stylus input
Supported O/S
Microsoft Windows® 7
12
Wall-Mount Installation Instructions
Wall Mount Arm not included
Turn the power OFF then disconnect the cables from the TFT
Touchscreen LCD Monitor before performing the procedure
below.
1. Lay the TFT Touchscreen LCD Monitor face down on a soft
surface.
2. Remove the two pieces of flake and Hinge Cover.
3. Remove the two screws under the flake.
4. Remove the stand.
5. Follow instructions included with the Wall Mount kit.
NOTE
100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm
2
1
3
4
13
Troubleshooting
No power
 Make sure A/C power cord is securely connected to the power adapter and the power supply
is
connected to the TFT Touchscreen LCD Monitor.
 Plug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
 Make sure all signal cables are installed.
Power on but no screen image
 Make sure the video cable supplied with the TFT Touchscreen LCD Monitor is tightly secured
to the video output port on back of the computer. If not, tightly secure it.
 Adjust brightness.
Wrong or abnormal colors
 If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
 Connect the TFT Touchscreen LCD Monitor to another computer.
14
Product Registration and Technical Support
Register Your Planar Products Today
Thank you choosing Planar. To assure you receive all the ben
of your Planar product and
services, register your Planar product today. Visit our website to register your product at
http://www.planar.com/support/product_registration.html
Cables, Replacement Lamps, Accessories
To
cables, replacement lamps and accessories for your Planar projector, LCD monitor, touch
screen or other Planar products visit our online store at www.PlanarOnline.com or
other
stores who carry Planar products at http://www.planar.com/howtobuy
Technical Support
Visit Planar at http://www.planar.com/support for product registration, operations manuals,
touch screen drivers, warranty information and access to Planar's Technical Library for online
troubleshooting. To speak with Planar Customer Support please have you model and serial
number available and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
15
2001170840P
020-1024-00A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement