- No category
advertisement
Evaporation
© Biotage 2014 57
Biotage
®
SPE Dry 96 & 96 Dual
Sample Concentrator System
Biotage
®
SPE Dry 96
Sample Concentrator System
Part Number
SD-9600-DHS-NA
Description
SPE Dry 96 Sample Concentrator
System, 100/120V
SD-9600-DHS-EU SPE Dry 96 Sample Concentrator
System, 220/240V
SD-9600-DHS-T-NA SPE Dry 96 Sample Concentrator
System, with PTFE coated needles
(Top Head Only), 100/120V
SD-9600-DHS-T-EU SPE Dry 96 Sample Concentrator
System, with PTFE coated needles
(Top Head Only), 220/240V
Biotage
®
SPE Dry 96 Dry Dual
Sample Concentrator System
Part Number Description
SD2-9600-DHS-NA SPE Dry 96 Dual Sample Concentrator
System, 100/120V
SD2-9600-DHS-EU SPE Dry 96 Dual Sample Concentrator
System, 220/240V
SD2-9600-DHS-T-NA SPE Dry 96 Dual Sample Concentrator
System, with PTFE coated needles
(Top Head Only), 100/120V
SD2-9600-DHS-T-EU SPE Dry 96 Dual Sample Concentrator
System, with PTFE coated needles
(Top Head Only), 220/240V
Evaporation Brochure
For further information please visit w ww.biotage.com to request a copy of our Evaporation brochure.
58 © Biotage 2014
2014 Analytical Sample Preparation Catalog
TurboVap
®
Evaporators and Concentrators
TurboVap
®
Product Family
TurboVap 500 TurboVap 96 TurboVap II
C103199
C103200
C103201
C112175
C133718
C55941
C109301
Tube Racks
C48950
C44577
C45286
C44139
C45269
C44282
C44283
C44880
C47818
C47820
C48928
C48929
C59546
C61345
Part Number
TurboVap 500
C103202
C103203
TurboVap 96
C103263
C103264
TurboVap II
C103186
C103187
C103188
C103189
C103190
C103192
C103193
C103194
C103196
C103197
TurboVap LV
C103198
Description
TurboVap 500, 100/120V, 50/60Hz
TurboVap 500, 220/240V, 50/60Hz
TurboVap 96, 100/120V
TurboVap 96, 220/240V
TurboVap II, 200 mL with 0.5 mL Endpoint Stem, 100/120V
TurboVap II, 200 mL with 1.0 mL Endpoint Stem, 100/120V
TurboVap II, 50 mL with 0.5 mL Endpoint Stem, 100/120V
TurboVap II, 50 mL with 1.0 mL Endpoint Stem, 100/120V
TurboVap II, 200 mL with 0.5 mL Endpoint Stem, 220/240V
TurboVap II, 200 mL with 1.0 mL Endpoint Stem, 220/240V
TurboVap II, 50 mL with 0.5 mL Endpoint Stem, 220/240V
TurboVap II, 50 mL with 1.0 mL Endpoint Stem, 220/240V
TurboVap II, 40 mL Dionex ASE Vial Compatible, 100/120V
TurboVap II, 40 mL Dionex ASE Vial Compatible, 220/240V
TurboVap LV without Racks, 100/120V
TurboVap LV without Racks, 220/240V
TurboVap LV, ASE, 40/60 mL vial, 100/120V
TurboVap LV, ASE, 40/60 mL vial, 220/240V
TurboVap LV, PTFE, 50 position, 100/120V
TurboVap LV, PTFE, 50 position, 220/240V
TurboVap LV, PTFE-Coated Upper Manifold Replacement Kit
TurboVap LV, Assy-Water Bath, PTFE Coated
Tube Rack (for 10 x 75 mm tubes P/N C48985) 250 tubes included
Tube Rack (for 12 x 75 mm tubes P/N C44651) 250 tubes included
Tube Rack (for 13 x 100 mm tubes P/N C40707) 250 tubes included
Tube Rack (for 16 x 100 mm tubes P/N C40708) 250 tubes included
Tube Rack (for 16 x 125 mm tubes P/N C45273) 250 tubes included
Tube Rack (for 20 x 150 mm tubes P/N C40709) 250 tubes included
Tube Rack (16 x 100 mm-Prelude compatible)
Tube Rack (for 15 mL Conical Centrifuge Tubes P/N C44941) 125 tubes included
Tube Rack (15 mL Autotrace tubes with conical bottom, suitable for tubes C47816)
Tube Rack (10 mL conical tubes, suitable for tubes C47811)
Tube Rack (1.5-2.0 mL flip cap microcentrifuge tubes)
Tube Rack (1.5-2.0 mL screw cap microcentrifuge tubes)
Tube Rack (GC vials)
Tube Rack (ASE 40/60 mL IChem Vials)
For further information please visit w ww.biotage.com to request a copy of our Evaporation brochure.
TurboVap LV
© Biotage 2014 59
Solvent Evaporation
Fast, Reliable and Affordable
Fast, Automated and Safe Drying of Solvents
The Widest Range of Evaporation Solutions Available
CONTENTS
1
Biotage Evaporation System Selection Guide
2
TurboVap
®
Technology
3
TurboVap
®
Family
4
TurboVap
®
II
6
TurboVap
®
LV
8
TurboVap
®
500
10
TurboVap
®
96
12
Biotage
®
SPE Dry
14
Biotage
®
V-10 Evaporator
16
Accessories
17
Related Products
18
TurboVap
®
LV – Tubes and Racks Chart
20
Ordering Information
Biotage offers the widest range of solvent evaporation systems available. This guide presents the most suitable evaporation system for your research requirements, and answers common questions regarding service, maintenance and applications.
Evaporation systems can be found in virtually every type of laboratory, from drug discovery to analytical chemistry. Biotage evaporation instruments are commonly used in many applications and have been the market’s preferred choice for decades.
For synthesis reactions, the unique Biotage
®
V-10 Evaporator offers a speedy solution for both HPLC fractions and high boiling solvent removal. Its automatic capabilities makes the V-10 Evaporator a work horse for today’s drug discovery industries.
In clinical and hospital labs, general sample preparation is common practice and together with our ISOLUTE
®
and EVOLUTE
® products we offer a complete solution for everyday evaporation and sample preparation needs. TurboVap
®
LV can accommodate a variety of sample sizes and formats to adopt your most common work practices.
In the environmental field, larger samples and low concentrations are often big hurdles. TurboVap
®
II and TurboVap
®
500 offer a complete solution for both concentrations into smaller volumes or complete evaporation prior to analysis.
4 8
12 14
2
©2013 Biotage
Trademark Acknowledgement
The following trademarks are owned by Biotage AB: Advancer, Advancer 350, Advancer Kilobatch, AFFINILUTE, Biotage, Biotage ZIP, Endeavor, EVOLUTE, EVOLUTE EXPRESS, ExploraSep, Extrahera,
Firefly design , FLASH+, FlashMaster, FlashVac, Flash 75, Flash 150, Flash 400, Horizon, HPFC, HP-SIL, HP-Sphere, Initiator, Initiator Peptide Workstation, Initiator+, Initiator+ Alstra, Initiator+ Robot
60, Initiator+ Robot 8, Initiator+ SP Wave, Isolera, Isolera Dalton, Isolera Dalton Mass Detector, Isolera Dalton Nanolink, Isolera Dalton System, Isolera Four, Isolera LS, Isolera One, Isolera Prime,
Isolera Spektra, Isolera Spektra Four, Isolera Spektra LS, Isolera Spektra One, ISOLUTE, ISOLUTE Myco, ISOLUTE QuEChERS, IST, IST design , KILOPREP, KP-C18-HS, KP-C18-WP, KP-C4-WP, KP-
NH, KP-Sil, KP-Sphere, MIP Rule of 6, MIP[4]Process, MIP[4]Proteins, MIP4SPE, PathFinder, PRESSURE+, PRESSURE+ 48, PRESSURE+ 96, RapidTrace, RapidTrace+, RENSA, Resolux, Robot 60, Robot 8,
Samplet, SIM, SNAP, SNAP Ultra, SNAP XL, SP Wave, SP1, SP4, SPE Dry, SPE Dry 96, SPE Dry 96 Dual, SPx, Syro Wave, TurboVap, Universal Phase Separator, V-10, VacMaster, ZIF, ZIF-SIM, ZIP-Sphere,
1-Point Support.
Other product and company names mentioned herein may be trademarks or registered trademarks and/or service marks of their respective owners, and are used only for explanation and to the owners' benefit, without intent to infringe.
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
System Overview
Biotage Evaporation System Selection Guide
Sample
Capacity
Sample
Volume
Key Applications Typical Solvents Heating Technology
TurboVap
®
II
6 50 mL or
200 mL
Food, water, soil and environmental solvent extraction.
Acetone
Acetonitrile
Methanol
Dichloromethane
Toluene
Water bath
(RT to 90 °C)
Gas vortex shearing technology sensor endpoint detection with either 0.5 mL or 1.0 mL endpoint stems.
TurboVap
®
II
ASE version
6 40 mL Food, water, soil and environmental solvent extraction.
Acetone
Acetonitrile
Methanol
Dichloromethane
Toluene
Water bath
(RT to 90 °C)
Gas vortex shearing technology sensor endpoint detection with either 0.5 mL or 1.0 mL endpoint stems.
TurboVap
®
LV
50
TurboVap
®
LV
ASE version
24
From 1.5 mL to 30 mL
Forensic, clinical chemistry, food, and pharmaceutical laboratories for concentration of solvents following SPE cleanup of drug sampels or pesticide extracts.
40 mL or
60 mL ASE tubes
Food, water, soil and environmental solvent extraction.
Acetonitrile
Ethylacetate
Hexane
Methanol
Dichloromethane
Acetonitrile
Ethylacetate
Hexane
Methanol
Dichloromethane
Water bath
(RT to 90 °C)
Gas vortex shearing technology.
Water bath
(RT to 90 °C)
Gas vortex shearing technology.
TurboVap
®
500
2 500 mL Larger samples, water testing in remote locations with simple lab equipment.
Comes with solvent recovery functionality as default.
Acetone
Hexane
Methanol
Dichloromethane
Water bath
(RT to 95 °C)
Gas vortex shearing technology sensor endpoint detection with either 0.5 mL or 1.0 mL endpoint stems.
TurboVap
®
96
Biotage
®
Dry
SPE
96 x 2 Up to 2 mL Genomic and proteomic applications that require concentration of purified extracts. Widely used for drugs of abuse and other pharmaceutical SPE methods.
24, 48,
96, and
384 well microplates
Up to
10 mL
(depending on format)
Forensic, clinical chemistry, food, and pharmaceutical laboratories for concentration of solvents following SPE cleanup of drug samples or pesticide extracts.
Acetonitrile
DMSO (Dimethyl sulfoxide)
Ethanol
DMF (Dimethyl formamide)
THF (Tetrahydrofuran)
Acetonitrile
DMF
Methanol
Propan-2-ol
DMSO
Heat block
Gas (RT to
80 °C)
Gas vortex shearing technology.
Heated gas delivery above and below wells speeds evaporation.
Biotage
®
V-10
1 Up to
12 mL
(depending on vial)
High BP solvents, reversed phase HPLC fractions.
Almost all solvents, especially good for:
DMF
DMSO
MeCN + water
MeOH + water
NMP
Heated air Patented 3-way evaporation including simultaneous heat, vacuum, and high speed vial rotation.
1
2
TurboVap
®
Technology
Highest Performance, Every Time
Starting with innovative engineering, TurboVap
®
systems from Biotage are designed with extensive customer input and testing. The result: industry-standard design and the highest performance in every way. TurboVap evaporators utilize a water bath system, providing higher efficiency and control and, unlike old heating blocks, consistently delivers fast and even results.
Highly Efficient, Patented Gas
Vortex Shearing Technology
The patented vortex evaporation design makes evaporation up to 10x faster compared to other techniques. The vortex created by the moving gas travels down the tube to the solvent surface, where it increases the gas/solvent interface—providing faster evaporation than conventional methods. The combination of gas flow and temperature control is used to optimize the sample drying. Nitrogen is recommended as the best choice of gas because it is inert and minimizes the risk of oxidation. A clean oil—free compressed air supply at 60 psi can be used if the sample is stable and/or nitrogen is not available.
Automated Evaporation Completion
The patented sensor technology alerts you with an audible alarm when evaporation is complete. This prevents the sample from going dry and volatiles from being lost. Sensor end-point detection is available with either 0.5 mL or 1.0 mL end-point stems.
Figure 1. Principle of the gas vortex shearing technology.
The position of the gas nozzle close to the tube wall is important for optimized evaporation.
Figure 2. The selection between
0.5 mL and 1 mL end-point detection is easily done with a quick modification of spacers.
0.5 mL mark and
0.5 mL end-point.
1 mL mark and 1 mL end-point.
Fast, Consistent and Even Results
TurboVap
®
500 does not require a fume hood or external gas supply for operation. It is designed as a closed system with up to 95% solvent recovery function for safe and economic waste handling.
Figure 3. The helical flow establishes a vortex action that promotes sample homogeneity and continuous rinsing of the tube wall.
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
TurboVap
®
Family
TurboVap
®
Family
Choose the Solution That’s Right for You
TurboVap
®
II
The TurboVap II Concentration Evaporator Workstation is a microprocessor-controlled concentrator for unattended, automated sample evaporation.
Unattended and automated
Optical sensor endpoint detection
6 individually controlled vial positions
No fume hood needed
TurboVap
®
LV
The TurboVap LV (Low Volume) Concentration Evaporator
Workstation offers many interchangeable tube racks giving you the flexibility for automated low volume sample preparation. The microprocessor controlled monitoring system regulates timed operation, water bath temperature, automatic gas shutoff and operational diagnostics.
50 positions with user selectable racks for greater flexibility
1.5–30 mL volume
TurboVap
®
500
The TurboVap 500 Concentration Evaporator Workstation is a closed-cell evaporation system that delivers automated sample concentration and solvent recovery using helical gas flow and sensor endpoint detection technology.
Solvent vapors are collected by the condensers on the side walls for waste or reclamation.
2 individually controlled positions
500 mL volume
0.5 or 1.0 mL endpoint stems
No fume hood needed
TurboVap
®
96
The TurboVap 96 Concentration Evaporator Workstation is a microprocessor-controlled evaporation system for simultaneous, automated and unattended concentration of multiple samples.
2 positions with individual gas regulation
Compatible with 96-well standard or deep well plates
3
Easy-to-use programming interface with individual tube control.
Glass window enables easy overview of the evaporation progress.
End-point detection terminates evaporation at
0.5 mL or 1.0 mL volumes.
Adjustable pressure regulator ensures optimal evaporation (not visible.)
4
TurboVap
®
II
Volume Range 50 mL or 200 mL
TurboVap
®
II increases the capacity and sample throughput in laboratories, eliminates concentration bottlenecks and maintains quality and lower costs.
This instrument has 6 sample positions and enables the user to evaporate to solid state or concentrate into a fixed end-point volume. The small footprint of TurboVap
®
II makes it the ideal choice in today's laboratories. It takes up only a fraction of the bench space used by conventional rotary evaporators and can even be used outside a fume cupboard by using the integral vent tube.
Applications
The TurboVap II Evaporation System efficiently concentrates samples prior to analysis by LC/MS or other analytical instruments. Optical sensors automatically stop gas flow when evaporation has reached its end-point, thereby eliminating the risk of drying and loss of volatile compounds. The TurboVap II is suitable for evaporation of large volumes after liquid-liquid extractions.
TurboVap II is available in a Dionex ASE* compatible setup which accommodate the use of six 40 mL stemmed and graduated Dionex ASE tubes. Upgrade kits are also available for converting your old TurboVap II.
*Dionex ASE is a registered trademark of Dionex/Thermo Fischer.
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
TurboVap
®
II
Evaporation Rates (180 mL solvent)
Solvent
Dichloromethane
Hexane
Acetone
Methanol
Acetonitrile
Toluene
Water
Bath temp.
(°C)
40
55
55
50
50
50
90
Gas pressure
(psi)
12
10
18
10
10
10
12
Approx. time (min.)
35
23
27
70
75
90
120
Specifications
Technology
Gas vortex shearing evaporation with sensor endpoint detection.
Available with either 0.5 mL or 1.0 mL endpoint stems
1–6
Number of samples
Timer range
Max. sample volume
Final endpoint volumes
Solvent reclamation
1 to 99 min. or 0.1 to 9.9 hrs.
200 mL
0.5 or 1 mL
–
Water bath capacity
6.4 L of distilled water
Water bath temperature
Ambient to 90 °C (upper temperature with sensors is 60 ºC)
Gas supply requirements Minimum inlet pressure
30 psi/2.1 bar. Maximum inlet pressure 80 psi/5.5 bar.
Gas consumption
Exhaust
At 11 psi: 0.08 cfm/nozzle or
2.3 L/min/nozzle
25 CFM blower with 5.1 cm/2" venting exhaust (tube supplied)
Electrical supply
220–240 V~, 50 Hz, 5 A (UK & EU)
100–120 V~, 50/60 Hz, 10 A
(USA & JP)
Max. power consumed
Dimensions (WxDxH)
Weight
Certifications
900 VA
53.8 cm x 30.5 cm x 30.5 cm
21.2" x 12" x 12"
18.4 kg/40.5 lbs
2006/95/EC Low Voltage Directive
2004/108/EC EMC Directive
93/68/EEC CE Marking Directive
Advantages
»
Proven equivalency with EPA methods
»
Patented vortex shearing technology
»
Patented sensor endpoint detection
– no monitoring required
»
Unattended operation for 1–6 samples
»
Controlled water bath is adjustable from ambient to 90 °C
»
Operators are free to perform other tasks while evaporation is running
»
User friendly displays and diagnostics
»
Convenient bench top size—no hood space required
Applications
»
Pharmaceutical biotech compounds
»
Clinical samples
»
Environmental samples
»
Forensic and crime samples
»
Drugs of abuse samples
»
Food and beverage analysis
»
Agrochemical samples
5
50 (standard) or 24
(ASE version) nozzles.
Each row of nozzles can be controlled individually, with indicator control for each line.
Adjustable pressure regulator ensures optimal evaporation (not visible.)
6
TurboVap
®
LV
Volume Range up to 60 mL
The TurboVap
®
LV evaporation system is an automated high speed, low volume sample concentrator. It is an efficient alternative to the inconvenient set-up, constant monitoring and long evaporation times that are characteristic of conventional techniques.
With the TurboVap
®
LV system, you simply “load and leave”. A water bath gives an even temperature and gas flow is delivered over a set time period. Turn on 1 to 5 manifolds depending on the number of samples and the timer will alert you when your samples are ready.
Applications
TurboVap LV is commonly used for evaporation of solvents following solid phase extraction clean-up of drug samples or pesticide extracts. It is ideal for sample volumes of 1 mL to
30 mL that need to be evaporated in GC vials, microcentrifuge tubes, conical bottom tubes or test tubes. It offers a high throughput solution with 50 sample positions using the standard range of Biotage racks.
TurboVap LV can be used in conjunction with the RapidTrace
®
+
Automated SPE workstation that collects extracts in 12 x 75 mm,
13 x 100 mm, or 16 x 100 mm test tubes. For acidic solutions,
Biotage offer PTFE coated nozzles to prevent corrosion. For volumes greater than 30 mL, an ASE compatible version of the
TurboVap LV is available for use in conjunction with Dionex ASE*
200 columns.
*Dionex ASE is a registered trademark of Dionex/Thermo Fischer.
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
TurboVap
®
LV
Evaporation Rates (10 mL solvent)
Solvent
Hexane
Acetonitrile
Dichloromethane
MeCN/water
Ethylacetate
Methanol/water
Methanol
Water
Bath temp.
(°C)
70
70
35
70
35
50
60
50
60
50
60
70
50
60
70
35
35
50
60
35
Gas pressure
(psi)
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Approx. time (min.)
7
65
50
65
35
15
10
26
18
210
140
32
22
15
20
19
11
7
55
100
Specifications
Technology
Number of samples
Gas control
Timer range
Gas vortex technology
50
Gas can be turned on to each of five independent manifolds when working with fewer than fifty samples. Gas regulator and gas gauge range from
0 to 20 psi/0 to 2 bar.
1 to 99 minutes, 0.1 to 9.9 hours, or infinite
30 mL (60 mL with ASE version)
–
Max. sample volume
Final endpoint volumes
Solvent reclamation
Water bath temperature
Gas supply requirements
Gas consumption
–
Ambient to 90 °C. Temperatures below ambient can be regulated using the cooling effect of the evaporation process.
Minimum inlet pressure 60 psi/4.1 bar
Maximum inlet pressure 100 psi/6.9 bar
At 10psi: 0.06 cfm/nozzle or 0.6 cfm/ row of 10 nozzles or 1.699 L/min/ nozzle.
At 15psi: 0.1 cfm/nozzle or 1 cfm/row of
10 nozzles or 2.83 L/min/nozzle
Exhaust
Electrical supply
5.1 cm/2” venting exhaust (tube supplied)
220–240 V~, 50 Hz, 5 A (UK & EU)
100–120 V~, 50/60 Hz, 10 A (USA & JP)
Max. power consumed 900 VA
Dimensions (WxDxH)
53.8 cm x 30.2 cm x 30.2 cm
21.2” x 11.9” x 11.9”
Weight
18.4 kg/40.5 lbs
Certifications
2006/95/EC Low Voltage Directive
2004/108/EC EMC Directive
93/68/EEC CE Marking Directive
Advantages
»
Patented vortex shearing technology
»
Proven compliance with EPA methods
»
10x faster than centrifugal evaporators
»
3x faster than hot blocks
»
2x faster than conventional N
2
blow down
»
Unattended operation for up to 50 samples
»
Twelve racks available for tube sizes from 1.5 mL to 30 mL
»
Controlled water bath adjustable from ambient to 90 °C
»
Built-in nitrogen regulator
»
Unattended operation improves lab productivity
»
User-friendly displays and diagnostics
»
Convenient size – no hood space required
»
No tube balancing required
»
Easily swap racks to change between different tube sizes
»
Requires no additional equipment such as vacuum pumps and vacuum traps
Applications
»
Pharmaceutical biotech compounds
»
Clinical samples
»
Environmental samples
»
Forensic and crime samples
»
Drugs of abuse samples
»
Food and beverage analysis
»
Agrochemical samples
7
Vortex shearing motor requires no gas supply for operation.
Easy-to-use operation interface for time, temperature and endpoint detection settings.
Built-in chiller for solvent recovery.
Endpoint sensors for 0.5 or 1 mL evaporation.
8
TurboVap
®
500
Volume Range up to 500 mL
TurboVap
®
500 can evaporate volumes up to 500 mL down to complete dryness with flat bottomed vessels or to a selectable endpoint at 0.5 or 1 mL. A water bath is used to maintain stable temperature, while the cooled glassware condenser collects the solvent. The condenser technology allows for efficient and cost effective collection of hazardous waste. It also prevents losses of samples and allows for analysis to detect cross-contamination issues.
Applications
In environmental laboratories, concentration of large samples is often a time consuming process. TurboVap
®
500 efficiently concentrates organic solvent extracts to 0.5 or 1.0 mL and sounds an alarm when finished. This “load and leave” capability frees the analyst for more important work.
TurboVap 500 is also an excellent alternative to traditional rotary evaporators used in organic synthesis. With a 500 mL solvent capacity and water bath temperatures up to 95 °C, synthesis mixtures are processed quickly. The unique vortexing action maintains the components of interest in the solvent during evaporations and minimizes the “plating” of the compounds on the vessel walls. The open top cylindrical design of the sample tube, with a small stem at the bottom, provides an easy way to recover the products of interest when the evaporation is completed.
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
Advantages
»
Patented vortex shearing technology
»
Patented sensor endpoint detection
»
Operators are freed to perform other tasks, further improving lab productivity
»
No “bumping” means no re-working of samples, saving you money every week
»
Solvent vapor recovery system – laboratory emissions can be greatly reduced
»
User-friendly displays and diagnostics
»
Convenient bench top size – no hood space required
»
No need for fume hood
»
Portable – no gas required applications
»
Environmental samples
»
Agrochemical samples
»
Forensic and crime samples
»
Drugs of abuse samples
»
Food and beverage analysis
»
Pharmaceutical biotech compounds
»
Clinical samples
»
Remote locations
TurboVap
®
500
Specifications
Technology
Number of samples
Timer range
Max. sample volume
Evaporation rate
Final endpoint volumes
Solvent reclamation
Gas vortex shearing technology
2
1 to 99 minutes
500 mL
Adjustable based on water bath temperature, fan speed and chiller or tap water temperature
Selectable. Automatic endpoints of 0.5 mL and 1.0 mL or dryness.
95% of solvent vapors under typical conditions
Water bath temperature
Gas supply requirements
Exhaust
Ambient to 95 °C (upper temperature with sensors is 60 °C)
Internal fan, 4000–8000 rpm No external gas required
–
No gas required
Minimum operating pressure
Electrical supply
Max. power consumed 900 VA
Dimensions (WxDxH)
61 cm x 30.2 cm x 53.8 cm
24” x 11.9” x 21.2”
Weight
18.4 kg/40.5 lbs
Certifications
220–240 V~, 50 Hz, 5 A (UK & EU)
100–120 V~, 50/60 Hz, 10 A (USA & JP)
2006/95/EC Low Voltage Directive
2004/108/EC EMC Directive
93/68/EEC CE Marking Directive
Evaporation Rates
Solvent
Dichloromethane
Hexane
Methanol
Acetone
Acetonitrile
Acetone/hexane (50:50)
Water
Methanol/water (50:50)
Solvent volume
(mL)
180
500
100
100
100
100
100
100
100
100
100
180
180
50
100
Bath temp. (°C)
58
58
75
58
58
58
58
56
38
38
38
38
38
58
58
Fan speed (rpm)
6000
6000
6000
6000
6000
6000
8000
8000
4000
6000
8000
4000
6000
6000
6000
Chiller temp.
(°C)
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Approx. time
(min.)
23
9
100
43
13
33
25
12
25
4
7
15
10
7
37
9
10
Unique nozzle design ensures fast and efficient vortex shearing evaporation.
Easy-to-use interface for time and temperature operation.
Individual control for each compartment.
Adapters support different plates and depths.
Dual gas regulators, one for each plate, operated individually for greater flexibility.
TurboVap
®
96
Deep or Shallow 96-well Plates
The TurboVap
®
96 Concentration Workstation is a high speed concentrator designed to work with
96-well microplates and deep-well plates. It is an efficient alternative to the constant monitoring and long evaporation times that are characteristic of conventional techniques—with the added bonus of unattended operation.
The evaporation process is driven by Biotage’s patented gas-vortex action, further enhanced by a temperature controlled environment and adjustable gas flow rates. This combination saves time, bench space and operating costs while improving the evaporation speed and sample-tosample consistency.
Applications
TurboVap
®
96 has two independent compartments that accommodate 1 mL or 2 mL standard or deep well plates. Each compartment has independent control of gas flow and temperature. The flow rate of the gas is determined by the volume of solvent in the plate and the temperature values can be set with the help of an evaporation guide supplied. Nozzles are easy to clean and require minimal maintenance.
In genomic and proteomic applications, the evaporation of DMSO from plates is a common application. As is drying
HPLC aqueous solvent mixtures of methanol or acetonitrile.
TurboVap 96 complements automated 96-well SPE workstations that are widely used for drugs of abuse determination and other pharmaceutical SPE methods.
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
Advantages
»
Patented vortex shearing technology
»
Operators are free to perform more important tasks, further improving lab productivity
»
No “bumping” means no re-working of samples, saving you money every week
»
User-friendly displays and diagnostics
»
Convenient bench top size—no hood space required applications
»
Pharmaceutical biotech compounds
»
Clinical samples
»
Environmental samples
»
Forensic and crime samples
»
Drugs of abuse samples
»
Food and beverage analysis
»
Agrochemical samples
TurboVap
®
96
Specifications
Technology
Number of samples
Gas vortex shearing technology
2 x 96 well plates, standard or deep with adapters
Format
Timer range
Max. sample volume
8 x 12 well microplates and deep-well plates
1 to 99 minutes
<2 mL
Final endpoint volumes –
Capacity
2 standard 96 well microplates or deep-well plates
Heaters
Two internal individually controlled heaters. Each adjustable from ambient to 80±5 °C.
Gas supply requirements
Range
Exhaust
Minimum operating pressure
Electrical supply
Minimum inlet pressure
30 psi/2.1 bar, Maximum inlet pressure 80 psi/5.5 bar.
5–99 cfm
25 CFM blower with 5.1 cm (2”) venting exhaust (tube supplied)
70 psi
220–240 V~, 50 Hz, 3 A (UK & EU)
100–120 V~, 50/60 Hz, 6 A (USA & JP)
Max. power consumed
620 VA
Dimensions (WxDxH)
30.5 cm x 30.5 cm x 61 cm
12” x 12” x 24”
Weight
Certifications
18.4 kg/40.5 lbs
2006/95/EC Low Voltage Directive
2004/108/EC EMC Directive
93/68/EEC CE Marking Directive
Evaporation Rates
1
Solvent
Methanol
Water
Acetonitrile
Acetonitrile/water (50:50)
THF (Tetrahydrofuran)
DMF (Dimethylformamide)
DMSO (Dimethyl sulfoxide)
Solvent volume (uL)
500
500
500
1000
1000
1000
250
Heater temp. (°C)
70
80
70
60
50
80
70
2
Gas flow rate
(cubic ft/hr.)
60
60
60
70
50
70
60
1. Above studies were conducted with clean solvent in a standard 2 mL polypropylene 96 well, deep well microplate.
2. Not the temperature of the solvent in the well.
3. The conditions set on the TurboVap
®
(temperature and flow rate) may not be optimum settings for most efficient evaporation rates.
Time to evap. to dryness
3
12 min.
70 min.
25 min.
1.75 hrs.
10–15 min.
50 min.
3 hrs.
11
Individual control for upper and lower sections.
PTFE coated needles available as option when evaporating acids and harsh solvents.
Available with single or dual configurations.
Heated gas flow ensures faster evaporation, especially for high boiling point solvents.
Modular design for easy swap between different nozzle configurations.
Easy adjustment of nozzle heights for optimal evaporation conditions for all plates.
12
Biotage
®
SPE Dry
Deep or Shallow 24-, 48-, 96-, and 384-well Plates
Biotage
®
SPE Dry 96 and SPE Dry 96 Dual Sample
Concentrators are suitable for evaporation of microplate samples across a broad range of formats. By delivering heated gas above and below each well,
SPE Dry 96 systems dry samples quickly maintaining tight temperature control at user selected settings.
Designed for high throughput sample processing,
SPE Dry systems have simple front panel controls and use removable gas delivery assemblies for fast adjusting and cleaning.
Versatile Formats
SPE Dry is designed with novel technology and a simple interface to produce uniform and reproducable evaporation.
The design has a small footprint to fit easily in the fume hood.
The heating mechanism is designed to rapidly heat without overshooting the temperature, preventing degradation of temperature sensitive compounds.
Standard SPE Dry 96 and SPE Dry 96 Dual systems are supplied with stainless steel needles. For high purity work, or applications that require particularly aggressive solvents, PTFE coated needles are available. Both needle types can be individually replaced should they become damaged or corroded.
SPE Dry is available in single or dual format and adapts easily to
24-, 48-, 96-, and 384-well microplate formats.
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
Advantages
»
Efficient evaporation through heated gas flow above and below collection plate
»
Precise temperature control and gas flow with reproducible evaporation times
»
Compact design
»
Easy to use
»
Suitable for 24-,48-, 96- and 384-well microplates
Biotage
®
SPE Dry
Specifications
Technology
Number of samples
Format
Timer
Max. sample volume
Final endpoint volumes
Capacity
24, 48, 96 or 384 well plates
Water bath temperature
60 °C (upper head)
80 °C (lower head)
Gas supply requirements 1 bar to 4.1 bar (15 psi to 60 psi)
Gas flow
Operating flow rate 25 L to
100 L per minute (LPM)
Exhaust
Electrical supply
Heated gas delivery above and below wells speeds evaporation
Models for one or two 96 well plates
8 x 12 well microplates and deepwell plates
Manual
10 mL collection plates
–
Max. power consumed
Dimensions (WxDxH)
Weight
Certifications
–
220–240 V~, 50 Hz, 5 A (UK & EU)
100–120 V~, 50/60 Hz, 5 A
(USA & JP)
405 VA
25.4 cm x 38.1 cm x 40 cm (dual)
10” x 15” x 15.7”
24.2 cm x 30.6 cm x 40 cm (single)
9.5” x 12” x 15.7”
13.9 kg/31 lbs
EN61326 (1997 w/A1: 98 & A2: 01)
Class A
Evaporation Rates
1
(minutes)
40 °C
2
60 °C
2
Solvent
Methanol
Water
Methanol/water (50:50)
Propan-2-ol
Acetonitrile/water (50:50)
Methanol/acetonitrile (50:50)
Acetonitrile
Methanol/(v/v) 1% NH4OH
DMF
Methanol/dichloromethane (50:50)
Dichloromethane (v/v) 1% NH4OH
14
90
46
16.5
51
19
17
18
73
12
8.5
3
1 mL
4
60
24
20
28
28
165
95
26
105
15.5
11.5
11
46
28
11.5
31
12
12
13.5
33
7.5
6
3
1 mL
4
20
86
56
16.5
36
15
15.5
16
41
9.5
8
1. Experiments were conducted with flow rate at 50 liters/minute at the upper manifold and 30 liters/minute at the lower manifold. Drying gas used was compressed air. Only standard moisture trap was used within the system. Moisture content of ambient air will affect results.
2. Temperatures refer to the upper head. Bottom unit was 20 °C higher.
3.
4. 1 mL volumes were in a 2 mL collection plate.
13
14
Access to eight built-in methods.
-20 °C condenser captures solvent vapors.
Automatic condenser drain reduces maintenance.
Optional syringe pump used when re-dissolving.
Optional peristaltic pump for large sample volume transfer.
Biotage
®
V-10 Evaporator
Volume Range 1 mL to 12 mL
The Biotage
®
V-10 solvent evaporation system rapidly dries samples dissolved in both aqueous and organic solvents up to 20x faster than traditional rotary or centrifugal evaporators.
A patented combination of drying techniques, including highspeed vial rotation, uniform IR controlled heating, and vacuum drying, allows for both rapid evaporation and low temperature evaporation of high boiling solvents. Pre-defined evaporation methods have been optimized to protect the sample against overheating or bumping whilst still maintaining maximum evaporation speed.
Master of Versatility
The versatility of V-10 enables rapid evaporation of single samples up to 12 mL or larger pooled volumes by using the V-10 integrated pumps. The carousel accessory enables unattended evaporation of up to 16 samples.
V-10 is the ideal system for evaporation of solvents from prep
HPLC fractions. Speed up your analysis step with rapid evaporation directly into a suitable vial for down stream processing.
Fractionate directly into vials compatible with the V-10, or pool up the fraction racks and use our automation software Control
Centre to integrate the entire evaporation process.
With the use of a liquid handling robot, the instrument can combine multiple fractions/samples from different test tube racks and dry them into a single vial in one operation.
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
Biotage
®
V-10
With the patented technology in V-10, users can rapidly remove high-boiling solvents like water, DMSO or even NMP at mild temperatures. This ensures rapid evaporation without overheating delicate samples.
Since compounds are dried directly in a vial of choice, tedious tasks such as sample transfers, handling and reformatting are minimized, increasing productivity in the lab.
The Bump-free vortex evaporation prevents sample loss while the system’s precise temperature control eliminates sample overheating. All this to maximize sample recovery and fast turnarounds with the automatic end-of-run detection.
Advantages
»
Patented rapid three-way drying: heating, vacuum, rotation
»
Evaporation of high boiling solvents
»
Versatile and automated
»
Clean and safe operation
»
Eliminates reformatting
»
Enhanced green chemistry
»
Simple operation
»
Compact footprint
Applications
»
Pharmaceutical compound registration
»
Synthetic intermediate isolation
»
Synthetic intermediate re-dissolve
»
Evaporation of high boiling point solvents
Specifications
Technology
Number of samples
Sample delivery
Patented, 3-way evaporation including simultaneous heating, vacuum, and high speed vial rotation
1–16 (with carousel)
5 mL syringe pump and/or peristaltic pump
30 mL (single vial)
Max. sample volume
Vial size compatibility
4 mL (3 variants)
8 mL HPLC vial
16 ml vial
20 mL scintillation vial
30 mL scintillation vial
Final endpoint volumes
User selectable volumes
Solvent reclamation
Up to 98% of solvent vapors under typical conditions
Nitrogen (when using pump for solvent delivery)
Gas supply requirements
Exhaust
Vacuum operating range
Electrical supply
Double trapping
Ambient to 2 mbar
Max. power consumed
Dimensions (WxDxH)
Weight
Certifications
220–240 V~, 50 Hz, 8 A (UK & EU)
100–120 V~, 50/60 Hz, 15 A
(USA & JP)
1700 VA
49 cm x 54 cm x 53 cm
19.3” x 21.3” x 20.9”
50 kg/110 lbs
EN 61010-1:2001 Low Voltage
Directive;
EN 61326 -1 EMC Directive;
UL 61010-1:2004;
CAN/CSA C22.2 No 61010-1-04 FCC part 15
Evaporation Rates (8 mL solvent)
Solvent
NMP
DMSO
DMF
Pyridine
Water
Methanol
Cydohexane
Boiling Point (°C)
202
180
150
115
100
65
81
V-10 Evaporation (min)
18
15
4
5.5
9
3
2.5
Centrifugal Evaporation
(min)
N/A
180
90
70
140
70
40
Blowdown Evaporation
(min)
N/A
N/A
N/A
N/A
240
40
20
15
16
Accessories
Vial Adapters for Biotage
®
V-10
Several vial adapters are available for 4 mL, 8 mL, and other vial types including 4 mL straight side vials.
Vial Carousels for Biotage
®
V-10
For automated drying of several solutions, vial carousels are available for 4 mL vials and 20 mL scintillation vials.
Gilson
®
Liquid Handler for Biotage
®
V-10
The Gilson GX-271 liquid handler enables fully automated evaporation together with V-10. Evaporate chromatography fractions directly from the chromatography system rack without manual intervention.
High-vacuum Pumps for Biotage
®
V-10
For the enhanced evaporation of high boiling solvents (DMSO,
NMP), an external high-vacuum pump is necessary. Biotage offers two models, the oil-based Vacuubrand RZ 2.5 and the oil-free Edwards XDS5.
TurboVap
®
II ASE Conversion Kit
With the Dionex ASE and the ASE Compatible TurboVap II, a six position rack will accommodate the use of 40 mL stemmed tube with 1 mL endpoint. This tube is available through Dionex
Corporation. For further information please contact Dionex at
1-800-523-4571.
TurboVap
®
LV ASE Conversion Kit
Convert TurboVap LV to 24 sample positions suitable for ASE
I-Chem vials. The kit comes with a rack with a removable shelf that allows the user to convert the rack from 40 mL to 60 mL vials and vice versa. This rack can also be used for the graduated, stemmed 40 mL Dionex vials.
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
Related Products
RapidTrace
®
+
RapidTrace
®
+ is a robust automated platform for sample preparation designated for solid phase extraction, SPE. It is used in pharmaceutical, clinical and forensic laboratories to develop and process rugged and reliable methods. RapidTrace+ eliminates SPE bottlenecks so you can realize the full benefits of today’s powerful analytical instruments.
Biotage
®
PRESSURE+ 48 & 96
PRESSURE+ manifolds deliver parallel positive pressure processing for 96 well plates in 1 mL 3 mL and 6 mL column formats. The systems utilize a consistent, uniform flow of positive pressure to move both low and high viscosity liquids through SPE plates and columns. Each port of the PRESSURE+ manifold independently maintains constant pressure, increasing the overall reproducibility of analyte recoveries. This unique design allows for partially populated racks to be used without sacrificing extraction efficiency.
Isolera
™
Spektra One/Four/LS
Isolera
™
is a family of flash purification systems with intelligent features that enable chemists to easily achieve better separations at scales from milligrams to over 150 g. The new Isolera Spektra enables chemists to purify more compounds in less time and reduce post-process purity analysis. Isolera Spektra doubles chemists’ productivity while slashing purification costs with 20% or more.
Accessories
17
TurboVap
®
LV – Tubes and Racks Chart
Match Your Tube to the Outline and Order the Corresponding Rack or Tubes
18
(Scale 1:1)
Dimensions (mm)
Maximum recommended volume
LV rack part number
Test tube part number
Packsize
20 x 150
30 mL
C44282
C40709
250
16 x 125
16 mL
C45269
C45273
250
16 x 100
12 mL
C44139
C40708
250
13 x 100
7 mL
C45286
C40707
250
12 x 75
4 mL
C44577
C44651
250
10 x 75
4 mL
C48950
C48985
250
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
Tube Matching Guide
Snap cap reference nr
Biotage part number
Kimble #73837
C44942 (case of 500)
Tube reference number
Max recommended volume
LV rack part number
Test tube part number
Kimble #45165
15 mL
C44880*
N/A
Kimble #73790
15 mL
C44880*
C44941 (vials only)
*Tubes (#C44941, 125 pieces) and 125 caps are included with purchase of this rack.
**Tubes not included with purchase of this rack.
Corning #8080
15 mL
C44880*
N/A
Kimble #73785
10 mL
C47820
C47811
Biotage #47816
15 mL
C47818**
C47816
Cap type
Max recommended Vol.
LV rack part number
Test tube part number
Screw Cap
1.5 mL
C48929
N/A
Flip Cap
1.5 mL
C48928
N/A
Screw Cap
2 mL
C48929
N/A
Flip Cap
2 mL
C48928
N/A
19
20
Ordering Information
TurboVap
®
II
Product Part Number
110V AC
TurboVap II Concentration Workstation with 200 mL tubes and 1.0 mL stems (110/120V) Includes: set of glassware (6 ea.), auxiliary rack for holding tubes,
12.5’ of 2” diameter duct hose, clear bath and operator’s manual
TurboVap II Concentration Workstation with 200 mL tubes and 0.5 mL stems (110/120V) Includes: set of glassware (6 ea.), auxiliary rack for holding tubes,
12.5’ of 2” diameter duct hose, clear bath and operator’s manual
TurboVap II Concentration Workstation with 50 mL tubes and 0.5 mL stems (110/120V) Includes: set of glassware (12 ea.), auxiliary rack for holding tubes,
12.5’ of 2” diameter duct hose, clear bath and operator’s manual
TurboVap II Concentration Workstation with 50 mL tubes and 1.0 mL stems (110/120V) Includes: set of glassware (12 ea.), auxiliary rack for holding tubes,
12.5’ of 2” diameter duct hose, clear bath and operator’s manual
C103187
C103186
C103188
C103189
220V AC
TurboVap II Concentration Workstation with 200 mL tubes and 0.5 mL stems (220V) Includes: set of glassware (6 ea.), auxiliary rack for holding tubes,
12.5’ of 2” diameter duct hose, clear bath and operator’s manual
TurboVap II Concentration Workstation with 200 mL tubes and 1.0 mL stems (220V) Includes: set of glassware (6 ea.), auxiliary rack for holding tubes,
12.5’ of 2” diameter duct hose, clear bath and operator’s manual
TurboVap II Concentration Workstation with 50 mL tubes and 0.5 mL stems (220V) Includes: set of glassware (12 ea.), auxiliary rack for holding tubes,
12.5’ of 2” diameter duct hose, clear bath and operator’s manual
TurboVap II Concentration Workstation with 50 mL tubes and 1.0 mL stems (220V) Includes: set of glassware (12 ea.), auxiliary rack for holding tubes,
12.5’ of 2” diameter duct hose, clear bath and operator’s manual
C103190
C103192
C103193
C103194
ASE Versions
ASE compatible TurboVap II Concentration
Workstation to accommodate 40 mL/1.0 mL Dionex tubes (110/120V) Includes: auxiliary rack for holding tubes, 12.5’ of 2” diameter duct hose, clear bath and operator’s manual
ASE compatible TurboVap II Concentration
Workstation to accommodate 40 mL/1.0 mL Dionex tubes (220V) Includes: auxiliary rack for holding tubes, 12.5’ of 2” diameter duct hose, clear bath and operator’s manual
TurboVap II ASE Upgrade Kit
C103196
C103197
C64676
Product Part Number
Vials
Evaporation tube (200 mL, 1 mL endpoint, 12/case) C128506
Evaporation tube (200 mL, 0.5 mL endpoint,
12/case)
C128507
Evaporation tube (50 mL, 1 mL endpoint, 12/case) C128511
Evaporation tube (50 mL, 0.5 mL endpoint, 12/case) C128508
Evaporation tube (50 mL, centrifuge, 12/case) C128512
TurboVap
®
500
Product
TurboVap 500, 100/120V, 50/60Hz
TurboVap 500, 200/220V, 50/60Hz
Vials
Evaporation tube (500 mL, 1 mL endpoint, 2/pk)
Evaporation tube (500 mL, 0.5 mL endpoint, 2/pk)
Evaporation tube (500 mL, flat bottom, 2/pk)
Spare Parts
TurboVap 500 condenser (1/pk)
Part Number
C103202
C103203
C128515
C128510
C128514
C128509
TurboVap
®
LV
Product
TurboVap LV, 110V (rack not included)
TurboVap LV, 220V (rack not included)
ASE compatible TurboVap LV, 40/60 mL vial, 110V
ASE compatible TurboVap LV, 40/60 mL vial, 220V
TurboVap LV ASE Upgrade Kit
TurboVap LV-PTFE, bath, manifold, 50 pos, vial
120V
TurboVap LV-PTFE, bath, manifold, 50 pos, vial
220V
Vials
Test Tubes (10 x 75 mm, uncapped, 1000/case)
Test Tubes (12 x 75 mm, uncapped, 1000/case)
Test Tubes (13 x 100 mm, uncapped, 1000/case)
Test Tubes (16 x 100 mm, uncapped, 1000/case)
Test Tubes (16 x 125 mm, uncapped, 1000/case)
Test Tubes (20 x 150 mm, uncapped, 500/case)
Test Tubes (10 mL conical, capped, 125/case)
Test Tubes (15 mL conical, capped, 125/case)
Test Tubes (polypropylene snap caps for 15 mL conical bottom tubes, 500/case)
C48985
C44651
C40707
C40708
C45273
C40709
C47811
C44941
C44942
Part Number
C103198
C103199
C103200
C103201
C60911
C112175
C133718
Solvent Evaporation – Fast, Reliable and Affordable | © Biotage 2013
Ordering Information
Product Part Number
Racks
Tube Rack (1.5–2.0 mL flip cap microcentrifuge) C48928
Tube Rack (1.5–2.0 mL screw cap microcentrifuge) C48929
Tube Rack (10 x 75 mm)
Tube Rack (12 x 75 mm)
Tube Rack (13 x 100 mm)
Tube Rack (16 x 100 mm)
Tube Rack (16 x 100 mm, prelude compatible)
C48950
C44577
C45286
C44139
C44283
Tube Rack (16 x 125 mm)
Tube Rack (20 x 150 mm)
Tube Rack (10 mL conical)
Tube Rack (15 mL conical)
Tube Rack (15 mL volumetric autotrace)
Tube Rack (ASE i-Chem Vials), TurboVap LV
C45269
C44282
C47820
C44880
C47818
C61345
TurboVap
®
Product
96
Product
TurboVap 96, 100/120V, 50/60 Hz
TurboVap 96, 220/240V, 60/60 Hz
Biotage
®
V-10 Evaporator
110V AC (USA)
with syringe pump with peristaltic pump with dual pumps with syringe pump and carousel drive unit with peristaltic pump and carousel drive unit with dual pumps and carousel drive unit
230V AC (EU)
with syringe pump with peristaltic pump with dual pumps with syringe pump and carousel drive unit with peristaltic pump and carousel drive unit with dual pumps and carousel drive unit
100V AC (JPN)
with syringe pump with peristaltic pump with dual pumps with syringe pump and carousel drive unit with peristaltic pump and carousel drive unit with dual pumps and carousel drive unit
Part Number
C103263
C103264
Part Number
EV10-1SX
EV10-1PX
EV10-1DX
EV10-1SC
EV10-1PC
EV10-1DC
EV10-2SX
EV10-2PX
EV10-2DX
EV10-2SC
EV10-2PC
EV10-2DC
EV10-3SX
EV10-3PX
EV10-3DX
EV10-3SC
EV10-3PC
EV10-3DC
Product Part Number
Accessories
4 mL vial upper adapter kit 5 pcs (type A), 8.5 mm neck inner diameter
4 mL vial upper adapter kit 5 pcs (type B),
11.1 mm neck inner diameter
4 mL vial upper adapter kit 5 pcs (type C),
12.0 mm neck inner diameter
4 mL vial lower adapter kit 2 pcs (type A),
14.8 mm vial diameter
4 mL vial lower adapter kit 2 pcs (type B),
14.1 mm vial diameter
4 mL vial lower adapter kit 2 pcs (type C),
16.3 mm vial diameter
Start up kit – Gilson
®
GX 271 (also 215,222)
V-10 carousel vial holder, 20 mL
V-10 carousel vial holder, 4 mL 14.5 mm
(type A/B)
V-10 carousel vial holder, 4 mL 16.5 mm (type C)
Gilson
®
GX 271 liquid handler for V-10
410647
410648
410649
411031
411032
411033
411037
411181
411182
411183
411816
Biotage
®
SPE Dry 96
Product Part Number
Single Plate
SPE Dry-96 Dual Heat Source (DHS), NA 110V
SPE Dry-96 Dual Heat Source (DHS), EU 220V
SD-9600-DHS-NA
SD-9600-DHS-EU
Dual Plates
SPE Dry-2x96 Dual Heat Source (DHS), NA
110V
SD2-9600-DHS-NA
SPE Dry-2x96 Dual Heat Source (DHS), EU
220V
SD2-9600-DHS-EU
Additional configurations are available. Please contact a Biotage representative for more information.
Accessories Single Plate
Spare upper needle head assembly with 96 straight needles, PTFE coated
Spare upper needle head assembly with 384 straight needles, PTFE coated
Top needle assembly (PTFE coated) - 24 channel
Accessories Dual Plate
Spare upper needle head assembly, 2 x 96 straight needles, coated
Spare upper needle head assembly, 2 x 384 straight needles, coated
SD-9601-T
SD-9601-384-T
SD-9601-T-24
SD2-9601-T
SD2-9601-384-T
21
Manual Sample Processing
Products and Accessories
© Biotage 2014 49
Biotage
®
PRESSURE+ 48 and PRESSURE+ 96
Positive Pressure Manifolds
Biotage
®
PRESSURE+ 96
Part Number Description
PPM-96 PRESSURE+ 96 Positive Pressure Manifold 96 position. Includes 1 x 1 mL 96 well collection plate, 1 x 2 mL 96 well collection plate,
1 x 10 mL 24 well collection plate (waste plate),
96-column sealing gasket, gas supply adaptor kit (6' of 1/8" i.d. polyethylene tubing and 1/8" and 1/4" NPT connectors),
User Manual CD-ROM.
Accessories
PPM-A96-GSKT PRESSURE+ 96 Sealing Gasket 96 position
PPM-A96-1024 PRESSURE+ 96 Collection Tray 10 mL 24 well
PPM-GA
121-5202
121-5203
PRESSURE+ Gas Supply Adaptor for all models
96-well collection plate, 1 mL, pack of 50
96-well collection plate, 2 mL, pack of 50
Biotage
®
PRESSURE+ 48
Part Number Description
PPM-48 PRESSURE+ 48 Positive Pressure Manifold 48 position. Includes Sealing gasket 48 position, gas supply adaptor kit (6' of 1/8" i.d.
polyethylene tubing and 1/8" and 1/4" NPT connectors), waste bin rack, waste bin inserts,
User Manual CD-ROM. Racks must be ordered separately.
Racks
PPM-A48-1RCK PRESSURE+ 48 SPE Column Rack 1 mL
PPM-A48-3RCK PRESSURE+ 48 SPE Column Rack 3 mL
PPM-A48-6RCK PRESSURE+ 48 SPE Column Rack 6 mL
PPM-A48-1275 PRESSURE+ 48 Collection Rack 12 X 75 mm
PPM-A48-13100 PRESSURE+ 48 Collection Rack 13 x 100 mm
PPM-A48-1232 PRESSURE+ 48 Sample Vial Rack 12 x 32 mm
PPM-A48-16100 PRESSURE+ 48 Collection Rack 16 x 100 mm
Accessories
PPM-A48-GSKT PRESSURE+ 48 Sealing Gasket 48 position
PPM-A48-WST PRESSURE+ 48 Waste Bin Inserts
PPM-GA PRESSURE+ Gas Supply Adaptor for all models
Service Options
Part Number Description
SER-PPM-IN PRESSURE+ Manifold Service Installation
SER-PPM-PL PRESSURE+ Manifold Platinum
Service Contract - 1 year
SER-PPM-SLVR PRESSURE+ Manifold Silver Repair Depot Service
Contract - 1 year
SER-PPM-FYMP PRESSURE+ Manifold 9 month extended warranty (1 year total)
50 © Biotage 2014
2014 Analytical Sample Preparation Catalog
Biotage
®
VacMaster
TM
-10 and -20
10 or 20 position vacuum manifolds for SPE, SLE and filtration applications.
Biotage
®
VacMaster
TM
-10 & -20
Sample Processing Manifolds
PTFE Stopcock Option and Spare Parts
Part Number Description
121-0009
121-0001
121-0002
121-0003
121-0004
Universal PTFE stopcock
PTFE stopcock/needle unit
PTFE needle
3
Stainless steel needle
4
1
2
Stainless steel needle retainer
121-0005
121-0009-S
Port sealing plugs
PTFE stopcock - pressure positive
20
10
30
10
Qty.
10
10
10
VacMaster-10 Sample Processing Manifold
Part Number Description
121-1010 VacMaster-10 Sample Processing Manifold
(with 10 mm rack)
121-1012 VacMaster-10 Sample Processing Manifold
(with 12 mm rack)
121-1016 VacMaster-10 Sample Processing Manifold
(with 16 mm rack)
VacMaster-10 Replacement Parts
Part Number Description
121-1039 Replacement tank with fittings
121-1045 Replacement lid with fittings
121-1030
121-1132
121-1133
121-1134
Silicone Lid Gasket
Replacement rack, 10 mm
Replacement rack, 12 mm
Replacement rack, 16 mm
Qty.
1
1
1
1
1
1
VacMaster-20 Sample Processing Manifold
Part Number Description
121-2010 Sample Processing Manifold
(with 10 mm rack)
121-2012 Sample Processing Manifold
(with 12 mm rack)
121-2016 Sample Processing Manifold
(with 16 mm rack)
VacMaster-20 Replacement Parts
Part Number Description
121-2068 Replacement tank with fittings
121-2075 Replacement lid with fittings
121-2059
121-2161
121-2162
121-2163
Silicone Lid Gasket
Replacement rack, 10 mm
Replacement rack, 12 mm
Replacement rack, 16 mm
Qty.
1
1
1
1
1
1
VacMaster Accessories
Part Number Description
121-0010 PTFE 'T' valve (for connecting 2 tanks)
Qty.
1
1 2 3 4
© Biotage 2014 51
Biotage
®
VacMaster
TM
-96
Sample Processing Manifold
Biotage
®
VacMaster
TM
-96
Vacuum manifold for processing 96-well SPE, SLE or filtration plates.
Part Number Description
121-9600 VacMaster-96 Sample Processing Manifold
(without vacuum control)
Vacuum Control Options
121-9601
121-9602
VacMaster VCU-1 Vacuum Control Unit
VacMaster VCU-2 Vacuum Control and
Generation Unit
96 Well Collection Plates - Deep Well
121-5202
121-5203
Collection plate, 1 mL
Polypropylene, Square well - 2 mL
Qty.
1
50
50
1
1
Replacement Parts
Part Number Description
121-9612 VacMaster-96 replacement gasket
121-9613
121-9614
121-9610
121-9615
121-9611
VacMaster-96 replacement o-ring
Collection plate spacer (2 mm) for deep well collection plates
Array insert (6 mm), acetal
Collection plate spacer (29 mm) for shallow well collection plates
VacMaster-96 insert (12 mm) for
“shallow skirt” plates
5
6
1
2
3
4
Qty.
1
1
1
1
1
1
5
6
4
1
2
3
52 © Biotage 2014
2014 Analytical Sample Preparation Catalog
Sample Processing Accessories
Biotage
®
VacMaster
TM
Drying Adaptor
Connect to laboratory air or nitrogen supply to dry 10 or 20
SPE columns simultaneously.
Part Number Description
124-1001 VacMaster-10 Drying Adaptor for 1,3 & 6 mL columns
124-2001 VacMaster-20 Drying Adaptor for 1,3 & 6 mL columns
Qty.
1
1
Biotage
®
VacMaster
TM
Trap Kit
Connect between VacMaster (-10, -20, or -96) and vacuum source to collect waste. 1 L volume.
Part Number Description
121-2095 VacMaster trap kit (complete)
Qty.
1
Biotage
®
VacMaster
TM
Large Volume Extraction (LVE) Kit
For unattended loading of large volume samples. Inert PTFE tubing prevents sample contamination.
Part Number Description
121-2090 VacMaster LVE kit (complete) for 1, 3 and 6 mL columns
Qty.
1
© Biotage 2014 53
Gravity Rack
Gravity Rack
Process up to 20 samples simultaneously under gravity.
Part Number Description
123-2016 Gravity Rack with 16 mm collection tube rack
123-2019 Gravity Rack with 19 mm collection tube rack
Accessories
121-0009
121-0001
121-0002
121-0003
121-0004
Universal PTFE stopcock
PTFE stopcock/needle unit
PTFE needle unit
Stainless steel needle
Stainless steel needle retainer
Qty.
1
1
10
10
10
20
10
54 © Biotage 2014
2014 Analytical Sample Preparation Catalog
Sample Preparation
Accessories
© Biotage 2014 45
Accessories
For SPE and Filtration
ISOLUTE
®
Column Adaptors
Column adaptors attach empty reservoirs, filtration columns and depth filters to SPE columns.
Part Number Description
120-1100 PTFE Adaptor - 1, 3 & 6 mL and XL
(columns A, B, C, G & H)
120-1101
120-1102
PE Adaptor - 1, 3 & 6 mL
(columns A, B & C)
PE Adaptor - 15 & 25 mL
(columns D & E)
120-1103
120-1104
PE Adaptor - 70 mL
(column F)
PTFE Adaptor - 6 mL
Glass columns
1
2
3
4
5
Qty.
10
10
10
10
10
ISOLUTE
®
Depth Filter Reservoirs
Reservoirs with pre-fitted depth filters remove particulate matter from aqueous samples, and prevent column blockage. Also allow for separate analysis of particulate compounds.
1
2
Part Number Description
120-1003-CD ISOLUTE depth filter, 6 mL
1
120-1009-FD ISOLUTE depth filter, 70 mL
2
Qty.
100
50
ISOLUTE
®
Column Caps
Seal prepared columns, samples loaded columns or immunoaffinity columns for transportation or storage.
Part Number Description
1201-0120 Bottom Luer cap, fits all columns
1201-0121-A Top cap, 1 mL column
1201-0122-B Top cap, 3 mL column
1201-0123-C Top cap, 6 mL column
1201-0125-H Top cap, 10 mL –
XL column
1201-0126-D Top cap, 15 mL column
1201-0127-E Top cap, 25 mL column
1201-0128-F Top cap, 70 mL column
D
E
F
Column
Type
All
Qty.
100
A
B
C
G & H
100
100
100
100
100
100
100
3
5
4
1
2
46 © Biotage 2014
2014 Analytical Sample Preparation Catalog
Accessories
For SPE and Filtration
ISOLUTE
®
Empty Reservoirs
Stack above SPE columns to increase the reservoir volume.
Part Number
120-1001-A
120-1002-B
120-1003-C
120-1006-D
120-1007-E
120-1009-F
Description
ISOLUTE Reservoir 1 mL
ISOLUTE Reservoir 3 mL
ISOLUTE Reservoir 6 mL
ISOLUTE Reservoir 15 mL
ISOLUTE Reservoir 25 mL
ISOLUTE Reservoir 70 mL
Qty.
100
100
100
100
100
50
ISOLUTE
®
Frits
20 µm porosity sintered polyethylene frits to fit all SPE column sizes.
Part Number Description
120-1031-A ISOLUTE Frit, 6 mm
(
1
/
4
"
) diameter – 20 µm PE
120-1032-G ISOLUTE Frit, 6 mm
(
1
/
4
"
) diameter – 20 µm PE
120-1033-B ISOLUTE Frit, 9 mm
(
3
/
8
"
) diameter – 20 µm PE
120-1034-H ISOLUTE Frit, 9 mm
(
3
/
8
"
) diameter – 20 µm PE
120-1035-C ISOLUTE Frit, 13 mm (
1 diameter – 20 µm PE
/
2
"
)
120-1036-D ISOLUTE Frit, 16 mm (
5 diameter – 20 µm PE
/
8
"
)
120-1037-E ISOLUTE Frit, 20 mm
(
13
/
16
"
) diameter – 20 µm PE
120-1038-F ISOLUTE Frit, 27 mm
(
11
/
16
"
) diameter – 20 µm PE
Column
Type
A (1 mL)
G (XL)
B (3 mL)
H (XL)
C (6 mL)
D (15 mL)
E (25 mL)
F (70 mL)
Qty.
100
100
100
100
100
100
100
100
ISOLUTE
®
Filtration Columns
Pre-fitted with two 20 µm polyethylene frits. Use as standalone filters or stacked above an SPE column.
Part Number Description
120-1021-A ISOLUTE double fritted filtration column,
1 mL–20 µm PE
120-1022-B ISOLUTE double fritted filtration column,
3 mL–20 µm PE
120-1023-C ISOLUTE double fritted filtration column,
6 mL–20 µm PE
120-1024-H ISOLUTE double fritted filtration column,
10 mL–20 µm PE
120-1025-D ISOLUTE double fritted filtration column,
15 mL–20 µm PE
120-1026-E ISOLUTE double fritted filtration column,
25 mL–20 µm PE
120-1028-F ISOLUTE double fritted filtration column,
70 mL–20 µm PE
Qty.
100
100
100
50
100
100
50
ISOLUTE
®
Sodium Sulfate
Drying Cartridges
Dry organic solvents with this easy to use format (contains 2.5 g of high purity sodium sulfate per cartridge). Stack beneath SPE columns during elution for efficient in-line solvent drying.
Part Number Description
802-0250-M ISOLUTE Sodium
Sulfate Drying Cartridge
Qty.
50
© Biotage 2014 47
Accessories
For SPE and Filtration
ISOLUTE
®
Filtration Plates
Each well contains a 20 µm polyethylene frit for high throughput filtration applications.
Part Number
120-1022-P01
Description
Filtration plate, fixed well,
2 mL–20 µm
Qty.
1
Plate Sealing Accessories
Seal wells and Luer outlets of ISOLUTE-96 fixed well plates.
Piercable sealing cap can also be used to seal collection plates.
Part Number Description
121-5204 Piercable Sealing Cap
121-5205 Luer Cap Mat
Qty.
50
25
Deep Well Collection Plates
1 or 2 mL volume per well, constructed from high purity, solvent resistant polypropylene. Seal with piercable sealing cap.
Part Number Description
121-5202 Collection plate, 1 mL
121-5203 Collection plate, 2 mL
Qty.
50
50
Array Accessories
Populate the reusable base plate to transfer individual Array wells into microplate format. Seal any unused positions with base plate plugs. Align wells and depopulate base plate after use with the well removing tool. Use Luer adaptors to process individual Array wells using a VacMaster-10 or -20 vacuum manifold.
Part Number Description
120-1000-P01 ISOLUTE Array base plate
120-1200
120-1201
120-1202
ISOLUTE base plate sealing strips
(strips of 8)
Luer Adaptors
(to fit any vacuum manifold)
Well removing tool
Qty.
1
50
25
1
48 © Biotage 2014
2014 Analytical Sample Preparation Catalog
Automated Sample
Processing Products
© Biotage 2014 55
RapidTrace
®
+
Automated High Throughput Solid Phase Extraction
Closed fluid path system with segregated waste lines maintain integrity of sample.
Reagent mixing chamber allows automated online reagent blending in the method.
Eight solvent/reagent lines for maximum methods flexibility.
Positive pressure, stepper motor syringe pump delivers precise flow rates.
Magnetically encoded racks of routine samples.
Compatible 1, 3 and 6 mL version SPE columns.
Part Number Description
C50000 RapidTrace+ Workstation,
1 mL and 3 mL
(10 columns)
C125713 RapidTrace+ Workstation,
6 mL (5 columns). 3 mL and 1 mL operation possible by purchasing appropriate plunger (see accessories brochure)
C52006
C52689
RapidTrace Start-Up Kit with Software
RapidTrace Notebook Controller
RapidTrace
®
+ Brochure
For further information please visit w ww.biotage.com to request a copy of our RapidTrace brochure.
Part Number Description
Racks (Each RapidTrace+ requires one rack)
C50974 13 x 100 mm Sample Tube
12 x 75 Fraction Tube
C50976 13 x 100 mm Sample Tube
12 x 75 Fraction Tube
C58309
C56786
C56536
C133968
13 x 100 mm Sample Tube
13 x 100 mm Fraction Tube
16 x 100 mm Sample Tube
16 x 100 mm Fraction Tube
13 x 100 mm Sample Tube
12 x 75 mm Fraction Tube
(9 Position Chilled Rack)
40 mL Sample Flask (5 position)
16 x 100 Fraction Tube (10 position)
1
1
1
Qty.
1
Pk/5
1
56 © Biotage 2014
2014 Analytical Sample Preparation Catalog
RevisedPages.qxp:Brochure 19/6/13 16:45 Page 2
RapidTrace
®
+
Automated SPE Workstation
Instruments
RapidTrace+
Accessories
Racks
Vial Adapters
Test Tubes
O-Rings
Miscellaneous
RT+_10.2011.qxp:Brochure 9/29/11 11:16 AM Page 2
Automate
Your Extractions
Increase your throughput and productivity
The RapidTrace
+
is a robust automated platform for quickly developing rugged, reliable SPE methods in regulated pharmaceutical, clinical and forensic laboratories. The RapidTrace
+
eliminates
SPE bottlenecks so you can realize the full benefits of today’s powerful analytical instruments.
The SPE Landscape
Advanced bioanalytical techniques like LC/MS/MS and GC/MS are meeting the increasing demand for greater speed and specificity in toxicological screening.
Conventional sample preparation methods have not kept pace. Solid phase extraction (SPE) in particular, an essential step in the analysis of many biomolecules, has become a throughput limiting factor in many laboratories.
The New Solution
The RapidTrace+ is the perfect complement to high speed analytical techniques, a powerful high-throughput workstation dedicated specifically to SPE. In its fully modular configuration, a ten module workstation can process up to 100 samples per hour.
The RapidTrace+ delivers:
• More samples per headcount
• Faster turnaround of results
• Improved quality, precision, accuracy and sensitivity
• Consistency of preparation
• Compliance with regulatory requirements
• Improved safety
• Quick response to peak or unexpected work loads
contents
RapidTrace+
Advantages
Specifications
Accessories & Related Products
Upgrades
Ordering Information
page
5
6
7
3
4
7
2
RT+_10.2011.qxp:Brochure 9/29/11 11:17 AM Page 3
Closed fluid path system with segregated waste lines maintain integrity of sample
Eight solvent/reagent lines for maximum methods flexibility
Reagent mixing chamber allows automated online reagent blending in the method
Positive pressure, stepper motor syringe pump delivers precise flow rates
Magnetically encoded racks of routine samples
RapidTrace
®
+
Intuitive SPE Automation
Compatible with 1, 3 and
6 mL version SPE columns
Rapid, Automated Sample Preparation for Routine
Processing and Method Development
The RapidTrace+ is designed for advanced processing and the rapid development of rugged sample preparation methods. It is extremely reliable and precise, incorporating easy-to-use features for quick method optimization. RapidTrace+ has been successfully implemented in a variety of laboratories all over the world.
The Biotage RapidTrace+ eliminates manual sample processing bottlenecks so that analysts can realize the full benefits of today’s powerful analytical instruments. RapidTrace+ is the perfect compliment to highspeed analytical techniques, a powerful high-throughput workstation dedicated to unattended automated sample preparation.
The enhanced RapidTrace+ broadens usability and increases instrument performance.
Fast and Easy Method Development with Easy-to-Use Software
Utilizing the familiar Microsoft
®
Windows
® interface, operators can easily implement a structured, rational strategy for method-development to determine optimum processing conditions for each sample. The methods can be written in minutes and recalled in seconds. Optimization of processing conditions is possible in a fraction of the time compared with conventional manual techniques. Column formats, reagents, concentrations and flow rates can be thoroughly explored as the system allows for incremental manipulation of any parameter (eg. pH, solvent concentration, cartridge type, flow rate etc) in order to determine effects on recovery and precision. Operators can insert, delete or manipulate steps and easily adjust parameters.
Methods can be assigned to an individual sample or by module. The methods stored in the RapidTrace+ controller can be easily transferred to other RapidTrace+ workstations.
Additionally, methods can be saved and run concurrently or true, unattended, “multi-method” sample processing.
This unique and rational method design capability dramatically speeds the development of rugged and reliable methods.
Instruments
3
RT+_10.2011.qxp:Brochure 9/29/11 11:17 AM Page 4
Technological Advantages for High Performance
Unmatched Performance and Throughput
The RapidTrace+ reduces timeconsuming manual sample preparation methods and ensures that processing times match analytical capabilities.
Every step of the sample preparation process is automated and rigorously controlled to give you a level of reproducibility unmatched by manual techniques.
All sample and solvent flow rates are individually controlled under positive pressure. Each step in the processing can be optimized for maximum accuracy and precision.
The improved throughput and workflow has been noted by customers reporting a 92% reduction in analyst time and a 72% reduction in extraction time for a 75 sample extraction, comparing the RapidTrace+ procedure against a manual vacuum manifold.
•
NEW!
Compatible with 1, 3, and 6 mL SPE Columns
Increased bed height enables the use of a wider range of
SPE cartridges including all ISOLUTE
® and EVOLUTE
® bed masses allowing for flexibility in methodology.
•
NEW!
Larger sample volumes
A new 5 position rack for 40 mL scintillation vials allows for larger sample volumes to be processed, often desired for food and environmental applications.
•
NEW!
Delay Start feature
Easily leave extracted samples unattended. Extracts are freshly prepared when you return.
• Modular design allows for up to 10 linked units
The Modular design allows users to start with one module and expand up to 10 linked units. Modules within a group can run different methods independently and if one module is shut down for operator attention, other units remain operational so that sample throughput is not halted.
• Accelerated methods development and optimization
Utilizing the easy-to-use interface, it is simple to implement a structured, rational strategy for optimum SPE conditions in experiments.
• Readily transferable methods
Methods stored in the RapidTrace+ controller can be instantly recalled and transferred to other units with
100% confidence.
• Positive Pressure Syringe Displacement
Positive pressure displacement allows for accurate processing and improves reproducibility in flow rate sensitive methods
• Safety and Security
Enclosed working parts ensures operator safety and reduced exposure to solvents and hazardous compounds. Additionally, password protected control software limits access to methods ensuring method security.
Combined with magnetically encoded racks, run initiation is simplified and the possibility of loading an incorrect procedure is reduced.
• 8 Solvent Inlet Lines
Allows for more flexible use of solvents and provides an excellent system for method development.
• Segregated Waste Lines
Four segregated output lines allow for easy separation of aqueous, organic and biological waste. Useful to simplify hazardous waste handling and reduce disposal costs.
• Simple and Reliable
Simple, rugged design with a minimum of moving parts and easily accessible consumables allows for a robust system with minimum “down-time”.
4
Instruments
RT+_10.2011.qxp:Brochure 9/29/11 11:17 AM Page 5
Technical Specifications
Column sizes
• 1, 3 or 6 mL
Sample size
• 0.1 mL to 14 mL
C50000 – RapidTrace+ Workstation 3 mL
(0.1 to 40 mL with upgrade to new rack sensor)
0.1 mL to 40 mL
C125713 – RapidTrace+ Workstation 6 mL
Syringe pump
• Load Volume 0.1 mL to 5.8 mL
Flow rates
• 0.1 mL/min to 42 mL/min (0.006 mL/sec to 0.7 mL/sec)
Liquid Handling Accuracy
• Volumes 3.0 mL ± 1%
Mixing Capability Cycle
• Maximum mixing volume of 5.0 mL in mixer
Liquid Sensing
• Volumes of 1.2 mL or larger
Solvent inlets
• 8 reagent inlets, individually configurable aspirate/dispense rates
Waste outlets
• 4 separate
Gas inlet (optional)
• 1-gas inlet, 2.8 bar maximum
Connections
• RS232 Input: Connects the module to the controller
RS232 Output: Used when multiple modules are connected
Dimensions
• 10 cm x 55 cm x 60 cm (W x D x H)
Weight
• 14,5 kg
Power Requirements
• 50–60 Hz, 100–240 VAC ±10%
Magnetically Encoded Racks
Magnetically Encoded Racks enable the user to designate a specific method to a rack.
When using magnetically encoded racks, the method does not have to be initiated via the controller software, because the module reads the magnets and automatically knows which method to run. The module runs the number of samples corresponding to the number of sample test tubes placed in the rack.
This means that software control of the system can be bypassed and methods will not be altered during routine operation. Labs around the world find this useful in production mode.
Compliance validation
Each unit includes a Validation Manual that allows operators to walk through the validation process of their RapidTrace+.
This ensures that the instrument provides the consistently clean extracts required for today’s sophisticated analytical instruments and regulatory bodies. The Validation Plan defines the methods and the documentation utilized in the development, execution and reporting of a validation for a
RapidTrace+. It addresses installation, operation and performance qualification. This comprehensive document enables operators to meet GLP, GMP and GOP requiremets.
Increase throughput by controlling up to 10 RapidTrace+ systems with single computer using the intuitive method development software.
Instruments
5
RT+_10.2011.qxp:Brochure 9/29/11 11:17 AM Page 6
Accessories
Related Products
Racks
There are several racks available, utilizing the unique magnetic encoding system:
• 13 x 100 mm fraction sample
12 x 75 mm fraction tube
• 13 x 100 mm fraction sample
13 x 100 mm fraction tube
• 16 x 100 mm fraction sample
16 x 100 mm fraction tube
• 13 x 100 mm fraction sample
12 x 75 mm fraction tube
9 position chilled rack
• 40 mL sample flash (5 position)
16 x 100 mm fraction tube
(10 position)
Vial Adapters
These adapters are designed for use with the 13 x 100 mm sample tube with
12 x 75 mm fraction tubes, to collect the fraction directly into a vial rather than a test tube. Transferring the sample from a test tube to a vial takes additional time and can result in a loss of some of the sample. There are two adapters available:
• 11 mm diameter vial
(standard 1.5mL GC vial)
• 4 mL vial (threaded HPLC vial)
SPE Solutions
Biotage manufactures a wide range of products to ensure options based on the degree of cleanliness required and the cost effectiveness demanded by the analysis. Solid Phase Extraction,
Supported Liquid Extraction and Protein
Precipitation techniques are uniquely supported by consumables, automation and accessories. Your Biotage representative can help you choose the best solution for your needs.
O-Rings
The O-Rings used on the RapidTrace
+ are subject to wear and will need to be replaced occasionally depending on usage:
• 6 mL SPE O-Ring, CHEMRAZ TM
• 3 mL SPE O-Ring, CHEMRAZ
• 1 mL SPE O-Ring, CHEMRAZ
• Cannula SPE O-Ring, CHEMRAZ
• Waste Station O-Ring, CHEMRAZ
Test Tubes
Disposable borosilicate glass test tubes for RapidTrace
+
. These tubes are also compatible with TurboVap LV
Evaporator for further downstream processing.
• 12 x 75 mm
• 13 x 100 mm
• 16 x 100 mm
Solvent Evaporation
Biotage offers the largest range of solvent evaporation systems designed for faster evaporation of volatile and high-boiling solvents and sample transfer minimization. Utilizing patented vortex shearing technology, rotation, controlled heating or vacume technology, Biotage will automate your process. Ask your representative about:
• TurboVap
® systems
• SPE Dry TM
• V-10
6
Accessories
RevisedPages.qxp:Brochure 19/6/13 16:45 Page 7
Ordering Information
RapidTrace
®
+
Product
RapidTrace+ Systems
RapidTrace+ Workstation,
1 mL and 3 mL (10 columns)
RapidTrace+ Workstation, 6 mL (5 columns)
3 mL and 1 mL only, with appropriate plunger
(see accessories)
RapidTrace Start-Up Kit w/ Software
RapidTrace Notebook Controller
Quantity Part Number
1
1
1
1
C50000
C125713
C52006
C52689
Accessories
Product
Racks (Each RapidTrace+ requires one rack)
13x100 mm sample tube
12x75 mm fraction tube
13x100 mm sample tube
12x75 mm fraction tube
13x100 mm sample tube
13x100 mm fraction tube
16x100 mm sample tube
16x100 mm fraction tube
13x100 mm sample tube 12x75 mm fraction tube (9 Position Chilled Rack)
40 mL sample flask (5 position)
16x100 fraction tube (10 position)
Magnet kit for encoding racks
Quantity
1 rack
5 racks
1 rack
1 rack
1 rack
1 rack
10 pack
Part Number
C50974
C50976
C58309
C56786
C56536
C133968
C54405
Product
Vial Adapters
11 mm Vial Adapter
4 mL Vial Adapter
Test Tubes
12 x 75 mm Test Tubes, uncapped
13 x 100 mm Test Tubes, uncapped
16 x 100 mm Test Tubes, uncapped
O-Rings
6 mL SPE O-Ring, CHEMRAZ
3 mL SPE O-Ring, CHEMRAZ
1 mL SPE O-Ring, CHEMRAZ
Cannula O-Ring, CHEMRAZ
Waste Station O-Ring, CHEMRAZ
(3 in a Waste Station)
Quantity Part Number
10 adapters C55091
10 adapters C55827
1,000/case C44651
1,000/case C40707
1,000/case C40708
1 O-Ring
1 O-Ring
1 O-Ring
1 O-Ring
1 O-Ring
C46643
C45096
C60969
C45096
C58526
Miscellaneous
6 mL Column Plunger
3 mL Column Plunger
1 mL Column Plunger
3 mL SPE Gel Adapter Kit
1 mL SPE Gel Adapter Kit
1 mL Adapter Sleeves
Tubing Weight Kit for Reagent Lines
Check Valve Kit for Manifold Reagent Lines
1
1
1
1
1 kit of 11
8 weights
8 valves
C69983
C52231
C52229
C58728
C58759
C59807
C50973
C55076
The Advantages of Upgrading Your Current RapidTrace
A broader range of SPE columns
Increased bed height capability enables the use of the most industry standard columns, including the entire Biotage ISOLUTE and
EVOLUTE range of 1, 3 and 6 mL columns allowing for a more flexible approach to sample volume.
Software upgrade 2.1
Customer installable software and firmware.
Note: 6 mL columns are only compatible with the 6 mL model, see below for upgrade information.
Part Number – C133966
Run 40 mL sample volume
A new 5 position rack for 40 mL scintillation vials for processing sample volumes up to
40 mL.
40 mL rack upgrade with sensor
Service visit required to install and upgrade the instrument to run the new 40 mL sample rack. Kit includes software and one rack.
Part Number – C133967
Run 6 mL columns
The 5 position turret for 6 mL columns is updated for easier column loading/ unloading. Additionally, adapters enable the use of up to 5 x 1 mL or 3 mL columns in the 6 mL turret.
6 mL Turret upgrade kit
Service visit required to upgrade existing
RapidTrace 3 mL instruments with the new 6 mL compatible turret. Kit includes software and adapters for 1 mL and 3 mL columns.
Part Number – C133969
NORTH AMERICA 1 800 446 4752 EUROPE +46 18 56 57 10 JAPAN +81 3 5627 3123
NORTH AMERICA 1 800 446 4752 EUROPE +46 18 56 57 10 JAPAN +81 3 5627 3123
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project