"user manual"
ND3% BASE1
XXXX3799-2199-1-Page 2199 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:16 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
HAND HELD OSCILLOSCOPES
FLUKE-190 SERIES SCOPEMETER® HAND-HELD OSCILLOSCOPES (CONT.)
FLUKE-120 SERIES
THREE-IN-ONE
SIMPLICITY
SCOPEMETER® HANDHELD OSCILLOSCOPES
•
•
•
•
•
•
•
•
•
ACCESSORIES
Mfg. Part No.
VPS121
VPS100
VPS201
VPS250
RS200
CS20MA
BP190
Dual-Input 40MHz or 20MHz Digital Oscilloscope
5,000 Count True-RMS Digital Multimeters
Dual-Channel TrendPlot™ Recorder
Connect-and-View™ Trigger Simplicity for Hands-Off Operation
10:1 Voltage Probe Included for Reduced Circuit Loading
Optically-Isolated RS-232 Interface
Meets 600V CAT III Safety Standards (IEC 1010-1)
UL listed, CSA certified
Recommended accessories - C125 Case, TL220 Test Lead Set,
i200s Current Clamp
PM9080/101
PAC91
SW90W/034EFG
C195
Compact FLUKE-120 series Scopemeter® is the rugged solution for industrial troubleshooting and installation jobs in
machinery, instrumentation, control and power systems. It’s an integrated test tool with oscilloscope, paperless data
recorder and DMM functions. You can use one and the same set to test leads for waveform display, multiple meter
readings, capacitance and resistance measurements, and continuity checking. There is no need to swap leads.
Mfg. part no. FLUKE-125 has all of the features of mfg. part no. FLUKE-124 plus network bus health test, power and
harmonics measurement, RPM reading and low resistance readings.
Mfg. Part No.
FLUKE-123/003
FLUKE-123/003S
FLUKE-124/003
FLUKE-124/003S
FLUKE-125/003
FLUKE-125/003S
Description
20MHz ScopeMeter®
20MHz ScopeMeter® with SCC120E Kit
40MHz ScopeMeter®
40MHz ScopeMeter® with SCC120E Kit
40MHz ScopeMeter®
40MHz ScopeMeter® with SCC120E Kit
Stock No. Price Each
16F6982
1385.00
16F6983
1715.00
29H4613
1715.00
26H5462
1999.00
30M9563
1990.00
30M9564
2318.00
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
FLUKE-123/003 CALIBRATED Calibrated 20MHz ScopeMeter®
FLUKE-123/003S CALIBRATED Calibrated 20MHz ScopeMeter® with
SCC120E Kit
57K9810
57K9811
1495.00
1825.00
73K7383
16F6984
86.00
66.00
16F6985
33B1938
32.00
333.00
ACCESSORIES
BP120MH
C120
C125
SCC120E
Rechargeable Battery Pack
Hardside Carrying Case for 120 Series
ScopeMeters
Softside Fabric Meter Case
C120 Hardside Carrying Case, FlukeView
Software and Interface Cable for 120 Series
ScopeMeters
C190
SCC190EFG
Description
Stock No. Price Each
1:1 Voltage Probe Set: 12MHz
25C5825
177.00
25C0386
348.00
100:1 Voltage Probe Set: 100MHz
24C6395
348.00
100:1 Voltage Probe Set, 200MHz
25C1610
348.00
2.5m Voltage Probe Set, 75MHz
25C6529
91.00
Voltage Probe Replacement Set
93B8021
75.00
Current Shunt 4-20mA
93B7966
131.00
Rechargeable NiMH Battery Pack for
190 Series ScopeMeter
39C2821
167.00
Optically Isolated-to-RS-232 Interface
Adapter and Cable
253.00
Serial-to-Parallel Printer Adapter Cable 16F6993
35C5189
242.00
FlukeView ScopeMeter Software
93B7962
141.00
Softside Carrying Case for 190 Series
ScopeMeters
157.00
Hardside Carrying Case for 190 Series 93B7955
ScopeMeters
97B9565
465.00
C190 Hardside Carrying Case,
FlukeView ScopeMeter Software and
Optically-Isolated Serial Interface USB
Adapter/Cable
(48582)
U1600 SERIES HAND-HELD DIGITAL
OSCILLOSCOPES
• Maximum 200MSa/s real time sampling, one channel
• Maximum 100MSa/s, using both channels simultaneously
• 2.5GSa/s repetitive sampling
• 11,100 points maximum recording length
• 4.5″ color LCD display
• FFT
• Waveform math
• Waveform zoom function
Mfg. part nos. U1602A and U1604A digital oscilloscopes combine bench performance with hand held convenience. All models come complete with mfg. part nos.
U1560A and U1561A scope test probes, mfg. part no. U1580A DMM test leads,
USB cable, power cord and AC adapter, mfg. part no. U1571A 4500mA NiMH
battery pack, Quick-Start guide, CD (which includes PC Link application software
and manuals), and test report. Order additional accessories separately below.
(19030)
SPECIFICATIONS
FLUKE-190 SERIES SCOPEMETER
HAND-HELD OSCILLOSCOPES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Speed, Performance and Analysis Power
Dual Input - 60, 100 or 200MHz Bandwidth
Up to 2.5GS/s Real-Time Sampling Per Input
Increased Waveform Acquisition Memory Depth of 3k Point Per Input
Connect-and-View™ Automatic Triggering, Full-Range Manual Trigger
Modes
Advanced Trigger Function (FLUKE-190C Series)
Digital Persistence for Analyzing Complex Dynamic Waveforms Like on an
Analog Scope
Frequency Spectrum Analysis Using FFT (FLUKE-190C Series)
Fast Display Update Rate for Seeing Dynamic Behavior Instantaneously
Automatic Capture and Replay of 100 Screens
27,500 Points Per Input Record Length Using ScopeRecord Mode
TrendPlot™ Paperless Chart Recorder For Trend Analysis Up to 22 Days
Up to 1000V Independently Floating Isolated Inputs
Waveform Reference for Visual Comparisons and Automatic Pass/Fail testing of Waveforms
Vpwm Function for Motor Drive and Frequency Inverter Applications
Four Hours Rechargeable NiMH Battery Pack
Recommended accessories - C195 Case, DP120 Differential Probe, i1000s Current Clamp
Dual Waveform Math
Trigger Modes
Cursor Modes
Automatic Voltage
Measurements
Automatic Time Measurements
FFT
For the more demanding applications, FLUKE-190 series ScopeMeter® high-performance oscilloscopes are ideal for
engineers who need the capabilities of a high-performance oscilloscope in a hand-held, battery powered instrument. All
FLUKE-190 series ScopeMeter® models come complete with mfg. part no. BC190 battery charger/line voltage
adapter, mfg. part no. BP190 NiMH battery pack, mfg. part no. TL75 hard point test lead set, mfg. part no. VPS200-G
gray voltage probe, mfg. part no. VPS200-R red voltage probe, Getting-Started guide, and user manual on CD. In
addition, models with SCC190 kit includes: mfg. part no. C190 hardside carrying case, serial interface cable and mfg.
part no. SW90W FlukeView® ScopeMeter® software for Windows®.
Mfg. Part No.
FLUKE-196C/003
FLUKE-196C/003S
FLUKE-199C/003
FLUKE-199C/003S
Description
100MHz Color ScopeMeter
100MHz Color ScopeMeter with
SCC190 Kit
200MHz Color ScopeMeter
200MHz Color ScopeMeter with
SCC190 Kit
Mfg. Part No.
U1602A
U1602A-001
U1604A
U1604A-001
3475.00
3950.00
U1602A
20MHz
U1604A
40MHz
2
8 bits
6000-Count, True rms, VDC, VAC, V DC + AC, Current, Temperature,
Humidity, Pressure, Resistance, Capacitance
Ch1+Ch2, Ch1-Ch2, Ch2-Ch1
Edge, Pulse, Pattern, Video
Voltage (Y Cursor), Time (X Cursor)
Peak-to-Peak, Max., Min., Amplitude, Top, Base, Mean, Cycle Mean,
RMS (DC), Preshoot, +Overshoot, -Overshoot
Frequency, Period, +Width, -Width, Rise Time, Fall Time, Phase, Delay
...
Rectangular, Hanning, Hamming,
Black-Harris
Description
20MHz Hand-Held Digital Oscilloscope
20MHz Hand-Held Digital Oscilloscope with USB Host
40MHz Hand-Held Digital Oscilloscope
40MHz Hand-Held Digital Oscilloscope with USB Host
Stock No. Price Each
04M7403
1358.00
04M7404
1509.00
04M7405
1695.00
04M7406
1846.00
ACCESSORIES
Mfg. part nos. U1560A, U1561A, and U1562A scope test probes include ground lead with mini-alligator clip and
hook-clip for probe tip.
Mfg. Part No.
U1560A
U1561A
U1562A
U1580A
U1571A
U1590A
Stock No. Price Each
39C2817
3135.00
39C2818
3565.00
39C2819
39C2767
U1602A
Mfg. Part No.
Bandwidth
Channel
Vertical Resolution
Multimeter Functions
®
Description
1:1 Scope Test Probe, Rated X1 CAT III 300V
10:1 Scope Test Probe, Rated X10 CAT III 600V
100:1 Scope Test Probe, Rated X100 CAT III 600V
Digital Multimeter Test Lead Probes — 1-Pair
4500mA NiMH Battery Pack
Softside Carrying Case
Stock No. Price Each
04M7396
151.00
04M7397
151.00
04M7398
151.00
04M7400
25.20
04M7399
69.53
04M7402
60.47
(89361)
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
All other models available calibrated with printed certification and data report; go online or call..
FLUKE-199C/003 CALIBRATED
FLUKE-199C/003S CALIBRATED
Calibrated 200MHz Color Scopemeter
Calibrated 200MHz Color Scopemeter
with SCC 190 kit
57K9817
57K9818
3585.00
4060.00
Probe Acccessory Set, Red
Probe Accessory Set, Gray
10:1 Voltage Probe Set, 200MHz, Red
10:1 Voltage Probe Set , 200MHz, Gray
25C3159
25C3158
24C5369
24C6393
71.00
71.00
177.00
177.00
ACCESSORIES
AS-200-R
AS-200-G
VPS200-R
VPS200-G
(148858)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2199))
C-2199
M-2199
Y-2199
B-2199
USEXP1-2199
2199
9
ND3% BASE1
XXXX3800-2200-1-Page 2200 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:16 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
HAND HELD OSCILLOSCOPES • DIGITAL MULTIMETERS
20 MHz AND 60MHz
2-CHANNEL DIGITAL
OSCILLOSCOPES
FLUKE-233 TRUE-RMS, WIRELESS REMOTE DISPLAY DIGITAL
MULTIMETER (CONT.)
Mfg. Part No.
Functions:
Temperature:
Power:
Wireless Frequency:
Safety Rating:
• 3.8″ (97mm) color LCD display makes viewing
multiple waveforms easy
• Peak detect function for 50ns glitch capture
• XY mode
• Persistence mode for observing dynamic signals
• EN61010-1, CAT II 400V safety rating
• One year warranty
FLUKE-233 true-rms, remote display digital multimeter allows the operator to be in two places at once. The removable
display solves the problems of holding both the meter and the test leads to make a measurement. Designed for making
measurements in hard-to-reach places, and in machines or panels that are physically separated from a limit switch or
an isolator switch. Ideal for working in areas where the operator can’t be close to the active measurement point, like
clean-rooms or hazardous areas. Comes complete with test leads, alligator clips, temperature probe, batteries, user’s
manual and three-year manufacturer’s warranty.
Mfg. part nos. MS420 and MS460 auto-set function optimizes the position, range, timebase, and triggering to assure a
stable display of virtually any waveform. Five automatic measurements: frequency, cycle, average, peak to peak and
RMS. Comes complete with two oscilloscope probes, test leads, Windows® compatible USB software and cable, current
shunt, capacitor measuring module, adjustment screw driver, AC adaptor/ charger, and hard carrying case. CE
compliant.
Mfg. Part No.
Description
MS420 20MHz Dual Channel Digital Oscilloscope
MS460 60MHz Dual Channel Digital Oscilloscope
Stock No. Price Each
71P2411
899.00
10R0436
1599.00
(148522)
MULTIFUNCTION DIGITAL
STORAGE OSCILLOSCOPES
•
•
•
•
•
FLUKE-233
Min/Max/Average, Hold, Auto, Manual Range, Continuity/Diode
-40°C to +400°C
5 AA Batteries for 200-Hrs. of Battery Life
2.4GHz
CAT III 1000V, CAT IV 600V
5MHz, 20MS/s Oscilloscope
41⁄2 -Digit, 20,000 Count DMM
1.3GHz Frequency Counter
5MHz Function Generator
Logic Analyzer
Choice of uncalibrated or calibrated models. Features 2.5 x 2.5″ 160 x 160 pixel graphic LCD, RS-232 interface.
Standard accessories include: holster, AC/DC adapter, scope probe and adapter, DMM test leads, RS-232 software,
RS-232 cable, and owner’s manual.
Mfg. Part No.
Description
72-6920 Multifunction Digital Storage Oscilloscope
Stock No.
36C3019
Price Each
1-4
479.27
(68940)
Mfg. Part No.
FLUKE-233
Description
True-rms Wireless Remote Display Digital Multimeter
Stock No.
10R6966
Price Each
320.95
(148702)
FLUKE-27-II AND FLUKE-28-II
RUGGED, WATERPROOF,
FULLY-SUBMERSIBLE DIGITAL
MULTIMETERS
Features:
• IP67 waterproof and dustproof protection, impervious
to the harsh environments
• Designed to withstand 3 meter drop
• Hi-resolution, easy-to-read display with large digits and
bright, two-level backlight for increased visibility
• Backlit keypad buttons allows for easy visibility in lowlit areas
• Reversible holster for added protection when not in use
• Improved sleep mode for long battery life
• Relative mode to remove test lead resistance from low
ohms measurements
• Auto and manual ranging for maximum flexibility
• MSHA approved for hazardous areas
• Limited lifetime manufacturer’s warranty
• Made in the U.S.A.
• CE complaint, TUV approved
FLUKE-27-II
FLUKE-28-II
Measures:
• Built-in thermometer conveniently takes temperature
readings without having to carry a separate
• Measure up to 1000V AC and DC
instrument
• Measure up to 10A (20A for 30 seconds)
• Resistance, continuity and diode test
• 10,000µF capacitance range
• Min/Max and average recording to capture variations
• Frequency to 200kHz
automatically
• Extended AC voltage bandwidth – 15Hz to 20khz
SPECIFICATIONS AT A GLANCE
FLUKE-233 TRUE-RMS,
WIRELESS REMOTE DISPLAY
DIGITAL MULTIMETER
9
Measures:
• True-rms AC voltage and current
• Measure up to 1000V AC and DC
• Measure up to 10A (20A for 30 seconds)
• 10,000µF capacitance range
• Frequency to 50kHz
• Built-in thermometer conveniently takes
temperature readings without having to carry a
separate instrument
• Resistance, continuity and diode test
• Min/Max and average recording to capture
variations automatically
Features:
• Wireless technology allows display to be carried up
to 30-ft. away from point of measurement
• Removable magnetic display can be conveniently
mounted where it is easily seen
• No need to hold meter to make or read
measurements, improving visual focus on probes
• Low-power 802.15.4 wireless technology does not interfere with measurement accuracy
• Use as a conventional multimeter when display is connected
• Auto power off maximizes battery life
• Radio transmitter automatically turns off when display is connected to meter
• True-rms AC voltage and current for accurate measurements on non linear signals
• Record signal fluctuations using Min/Max function
• Test continuity and diodes
• Easy-to-read display with large digits and bright backlight
• Battery life approximately 200-hours
• Three-year manufacturer’s warranty
• Made in the U.S.A.
• CE compliant, TUV approved
SPECIFICATIONS AT A GLANCE
Mfg. Part No.
Counts:
Voltage:
Current:
Resistance:
Capacitance:
Frequency:
Mfg. Part No.
Response:
Counts:
Voltage:
Current:
Resistance:
Capacitance:
Frequency:
Functions:
Temperature:
Low Pass Filter
(Measurements on VSD’s):
Safety Rating:
IP Rating:
Power:
Dimensions:
FLUKE-28-II
True-rms
6000 / 19,999
0.1mV to 1000V AC/DC
0.1µA to 10A AC/DC
0.1Ω to 50 MΩ
1nF to 9999µF
0.5Hz to 199.99kHz
Min/Max/Average, Hold, Auto, Manual Range, Continuity / Diode
...
-200°C to +1090°C
...
Yes
Mfg. Part No.
FLUKE-27-II
FLUKE-28-II
Description
Waterproof Digital Multimeter
True-rms, Waterproof Digital Multimeter
(148703)
FLUKE-233
6000
0.1mV to 1000V AC/DC
0.1mA to 10A AC/DC
0.1Ω to 40MΩ
1000nF to 9999µF
0.1Hz to 50kHz
C-2200
M-2200
CAT III 1000V, CAT IV 600V
IP67
Three AA Batteries for 800-Hours of Battery Life
8″H x 3.75″W x 2.2″D
FLUKE-27-II and FLUKE-28-II fully-submersible digital multimeters are ruggedly built to work in the toughest
environments. These two industrial multimeters define a new standard for operating in harsh conditions with the
features and accuracy to troubleshoot most electrical problems. Both meters have IP-67 (waterproof and dustproof)
rating, MSHA approvals, an extended operating temperature range of -15° C to + 55°C (5°F to 131°F) and 95%
humidity, and are shock/vibration-resistant to withstand a 3-meter (10-ft.) drop to concrete. Both meters can withstand
hazardous 8000 volt spikes caused by load switching and faults on industrial circuits and comply with second edition IEC
and ANSI electrical safety standards. Mfg. part no. FLUKE-28-II also features hi-resolution 20,000 count display mode
and true-rms AC voltage and current for accurate measurements on non linear signals. Plus it has a unique function for
accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy
equipment. Both models come complete with holster, test leads, alligator clips, batteries and user’s manual.
2200
STIBOINFO((NEWARK_MAIN_C124_2200))
FLUKE-27-II
Average
6000
Y-2200
B-2200
USEXP1-2200
Stock No.
10R6967
10R6968
Price Each
440.00
465.95
ND3% BASE1
XXXX3801-2201-1-Page 2201 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:16 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
DIGITAL MULTIMETERS
FLUKE 287, 289 DIGITAL DATA LOGGING
MULTIMETERS
FLUKE-289/IMSK AND FLUKE-179/IMSK
INDUSTRIAL MULTIMETER SERVICE COMBO KITS
Fluke-289/IMSK Kit includes:
• Fluke-289V Advanced data logging Multimeter
Trendcapture: record, graph and review
measurements in the field
Precise Performance: solve problems with speed and
accuracy
Large 50,000 count, 1/4 VGA display with white
backlight
Unique function for accurate voltage and frequency
measurements
LoZ Volts low impedance voltage function
50 ohm range
Fluke-289/IMSK
• Fluke-i400 AC 400A Current Clamp
Companion to your DMM to measure up to 400 A AC
1mA/Amp output
CAT IV 600 V / CAT III 1000 V safety rating
Designed to offer maximum utility in a very compact shape
22 of the most useful accessories
• TL71 Silicone Test Leads
• AC72 Alligator Clips
• Limited lifetime warranty on Fluke-289 and 1-year warranty on accessories
Fluke-179/IMSK Kit includes:
• Fluke-179 True RMS Multimeter with temperature
frequency, capacitance
0.09% basic accuracy
6000 counts
Smoothing mode allows filtering of rapidly changing
inputs
• Fluke-322 AC 400A Current Clamp
Measures AC current to 400 A
Measures AC and DC volts to 600 V
Precise measurements with 1.8% basic accuracy
Resolution up to 0.01A and 0.1 V
• 80BK-A thermocouple bead probe
Fluke-179/IMSK
• TL75 test leads
• AC72 Alligator Clips
• Limited lifetime warranty on Fluke-179 and 2-year warranty on Fluke-322
Mfg. part no. FLUKE-289/IMSK combo kit combines the advanced data logging multimeter with Trendcapture with the
i400 AC current clamp. Together they provide the ability to troubleshoot most industrial problems.
280 Series Trend
FLUKE 289
Features:
• 50,000 count 1/4 VGA dot matrix display with white backlight
• True-RMS for accurate measurements on non-linear loads
• Trendcapture plots measurements as single line to help detect anomalies
• LoZ: low input impedance prevents false readings due to “ghost voltage” (Model 289)
• 50 Ohm Range for motor winding and low ohm measurements (Model 289)
• Soft keys and navigation control provide access to secondary functions
• Saved measurements allows the user to name and recall measurements made in the field
• Field upgradeable and expandable meter as new capabilities added
• Record events and trends, and display as a graph on the meter without downloading to a PC
• Multi lingual interface
• Internal memory allows stand-alone logging up to 200 hours
• Min/Max/Average with Time Stamp to record signal fluctuations
• Compatible with optional magnetic hanger (ToolPak) for hands free operation
• Optical RS232, USB communication interface
• CAT III 1000 V / CAT IV 600 V safety rated
Capabilites
• Measures up to 1000V AC and DC
• Current measurement 20A (30 seconds momentary; 10A continuous)
• 10,000µF capacitance range
• Frequency to 999.99kHz
• Build in thermometer -200°C to +1350°C (-328°F to +2462°F)
• Continuity/Conductance/Capacitance
• Resistance and continuity
Mfg. Part No.
FLUKE-287
FLUKE-289
Description
Fluke 287 Digital Multimeter
Fluke 289 Digital Multimeter
Stock No.
42M9904
42M9905
Price Each
464.95
544.95
TYPE 289 KIT
Mfg. Part No.
Description
FLUKE -289/FVF Fluke 287 Digital Multimeter, test leads, alligator clips,
80BK temperature probe, TPAK magnetic meter hanger,
FlukeView® forms software and cable, soft case.
Stock No. Price Each
54M4559
615.95
Mfg. Part No.
Description
Stock No. Price Each
584.95
FLUKE-289/IMSK Fluke-289 Industrial Logging Meter w/ Fluke- i400 Clamp 09R2346
Meter Combo Kit
Mfg. part no. FLUKE-179/IMSK combo kit combines the rugged 179 true-rms multimeter with a built-in thermometer
and the 322 AC current clamp. Together they provide the ability to troubleshoot electrical and electromechanical
problems.
Mfg. Part No.
Description
Stock No. Price Each
09R2345
295.95
FLUKE-179/IMSK Fluke-179 Meter w/ Fluke 322 Clamp Meter Combo Kit
(147954)
LOGGING DIGITAL
MULTIMETER ACCESSORIES
(94360)
ELECTRONICS AND INDUSTRIAL
MASTER TEST LEAD KITS
TLK287
TLK289
These master test lead kits are ideal for today’s electrical and electronics testing and design. Perfect to complement
mfg. part nos. Fluke-287 and Fluke-289 logging digital multimeters; ordered separately on this page.
ELECTRONICS MASTER TEST LEAD KIT
Mfg. part no. TLK287 Electronics Master test lead kit includes precision electronic probes with multiple spring-loaded
sharp tips to maximize contact with SMD test points, micro-grabbers and leads to enable fine SMD testing plus
mini-alligator clips, grabbers and probes for virtually every electronics need. All packaged in a handy storage case.
Mfg. Part No.
TLK287
Description
Electronics Master Test Lead Kit
Stock No.
70M8699
FVF-SC2
TPAK
IR189USB
BP189
IV series accessories allows easy storage of multimeters. TPAK ToolPak™ allows you to hang your meter by a magnet
or strap hanger. The magnet allows you to hang your multimeter just about anywhere. For use witrh FLUKE-110, -170,
-180 series, 87V, 83V DMMs, 724, 725 and 789 ProcessMeter™ test tools.
Mfg. part no. FVF-SC2 FlukeView® Forms version 3.0 software allows you to document, store and analyze readings or
measurements from mfg. part nos. 280 and 180 series , 789, 1550B or 1653 test tools. Mfg. part no. FVF-SC4
version 4.0 software supports 8808A, 8845A and 8846A multimeters. FlukeView® forms software offers enhanced
display functions and real time logging with mfg. part nos. 187 and 189. Provides data download for mfg. part no. 189.
Creation of custom forms, reports, graphs and tables. Includes interface cable, full user documentation and manual.
Mfg. part no. FVF-Basic works with mfg. part nos. 280 and 180 series, 789, 1550B and 1653.
Mfg. part no. BP189 high capacity battery pack for Fluke-180 series DMMs. Mfg. part no. IR189USB changes the
RS232 serial cable in the mfg. part no. FVF-SC2 to a USB cable.
Mfg. Part No.
TPAK
FVF-SC1
Description
ToolPak Magnetic and Velcro Strap
FlukeView Forms Software with Cable for 53-II, 54-II, 87IV
and 89IV
FLUKE-FVF-SC2 FlukeView Forms Software with Cable for 280 and 180
series, 789, 1550B and 1653
FlukeView Forms Software with Cable for 8808A, 8845A,
FVF-SC4
and 8846A
FLUKE-FVF-BASIC FlukeView Forms Basic Software with Cable for 280 and
180 series, 789 and 1550B
FlukeView Forms Software Upgrade
FLUKE-FVF-UG
High Capacity Battery Pack
FLUKE-BP189
FLUKE-IR189USB RS232-to-USB Cable Assembly
Price Each
119.55
INDUSTRIAL MASTER TEST LEAD KIT
Mfg. part no.TLK289 Industrial Master test lead kit contains SureGrip™ alligator clips, grabbers, hook clips and
industrial test probes for dependable contact with a variety of test points. Also includes a temperature adapter with
K-Type thermocouple for direct temperature measurement with user’s own DMM’s temperature measurement
functions, a convenient, magnetic DMM hanger and a protective, softside carrying case.
Mfg. Part No.
TLK289
Description
Industrial Master Test Lead Kit
Stock No.
70M8700
Price Each
119.55
(105203)
Stock No. Price Each
97B3576
33.15
24C4883
187.15
26K2565
179.93
55M0615
243.45
26K2563
120.20
26K2567
26K2561
26K2568
92.72
43.10
40.80
(48580)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2201))
C-2201
M-2201
Y-2201
B-2201
USEXP1-2201
2201
9
ND3% BASE1
XXXX3802-2202-1-Page 2202 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:17 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
DIGITAL MULTIMETERS
FLUKE-80 SERIES V
INDUSTRIAL MULTIMETERS
FLUKE-170 SERIES DIGITAL
MULTIMETERS
•
•
•
•
Wide 1000 V measurement range
True-rms voltage and current measurements
6000 count resolution
Digital display with analog bargraph and
backlight (177, 179)
• Manual and automatic ranging
• Display Hold and Auto Hold
• Frequency and capacitance measurements
• Resistance, continuity and diode
measurements
• Temperature measurements (179)
• Min/Max/Avg recording
• Easy battery exchange without opening the
case
• Closed case calibration through front panel
• Ergonomic case with integrated protective
FLUKE-179
holster
• EN61010-1 CAT III 1000 V, CAT IV 600 V
• Recommended accessories: C25 Case, TL71
Test Lead Kit, i410 Current Clamp
AC amps: 3mA to 10.00A (20A overload for 30 seconds). DC amps: 0.01mA to 10.00A (20A overload for 30 seconds). AC
voltage: 30mV to 1000V. DC voltage: 0.1mV to 1000V. Resistance: 0.1Ω to 50.00MΩ. Capacitance: 1nF to 9999µF.
Frequency voltage input: 2Hz to 100kHz; current input: 2Hz to 30kHz. Temperature range: -40°F to +752°F (-40°C to
+400°C). Includes test leads, battery and manual. FLUKE-179 also includes 80BK-A temperature probe. Certificate of
calibration available on all models, go online or call Newark.
Features:
• Unique Function for Accurate Voltage and Frequency Measurements on
Adjustable Speed Motor Drives and Other Electrically Noisy Equipment
(FLUKE-87-V and 87V EX)
• Optional Magnetic Hanger for Hands-Free Setup and Viewing
• Large Display Digits and 2-Level Bright White Backlight for Increased
Visibility
• Withstands Hazardous 8,000 Volt Spikes Caused by Load Switching and
Faults on Industrial Circuits
• Complies with Second Edition IEC and ANSI Electrical Safety Standards
• Improved Sleep Mode for Long Battery Life
• Relative Mode to Remove Test Lead Resistance for Low Ohms
Measurements
• Auto and Manual Ranging for Maximum Flexibility
• Meets 1000V CAT III and 600V CAT IV Safety Standards (IEC 1010-1)
• UL listed, CSA certified, CE compliant, VDE approved, TUV approved
• Recommended accessories: C35 Case, TLK-220 Test Lead Set, i400
Current Clamp
Capabilities:
• Measure up to 1000V AC and DC
• Measure up to 10A (20A for 30 seconds)
• 10,000uF Capacitance Range
• Frequency to 200kHz and % Duty Cycle
• True-rms AC Voltage and Current for Accurate Measurements on Non Linear Signals (FLUKE-87-5)
• Built-in Thermometer (FLUKE-87-5); Thermocouple Included
• Peak Capture to Record Transients as Fast as 250 µs (FLUKE-87-5)
• 41⁄2 Digit Mode (FLUKE-87-5)
Mfg. Part No.
FLUKE-175 ESFP
FLUKE-177 ESFP
FLUKE-179-ESFP
FLUKE-80 series V has improved measurement functions, troubleshooting features, resolution and accuracy to solve
more problems in electronics, plant automation, power distribution, and electro-mechanical equipment.
Mfg. Part No.
FLUKE-83-5
FLUKE-87-5
FLUKE-87-5/EX
Description
Industrial Digital Multimeter
Industrial Multimeter with Temperature
Intrinsically Safe True-rms Multimeter
Stock No. Price Each
96H6286
369.95
96H6287
379.95
20M0501
899.95
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
424.95
434.95
(78246)
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
FLUKE-175 ESFP CALIBRATED
FLUKE-177 ESFP CALIBRATED
FLUKE-179-ESFP CALIBRATED
Calibrated Model 175 Digital Multimeter
Calibrated Model 177 Digital Multimeter
Calibrated Model 179 Digital Multimeter
57K9813
57K9814
57K9815
282.95
292.95
302.95
ELECTRONICS COMBO KIT
Combo Kit Includes:
• Fluke 179 True-rms Digital Multimeter
with Backlight
• Fluke TL224 Silicone Test Leads
• Fluke TL910 Electronic Test Probes with
Replacement Tips
• Fluke AC280 Heavy Duty Hook Clips
• Fluke 80BK-A Integrated Temperature
Probe
• Fluke C35 lightweight soft case to
provide optimal protection and storage
• TPAK Magnetic Hanger
87V/E INDUSTRIAL COMBO KIT
Kit Contents:
• 87V Industrial Multimeter
• 1.5m Silicone Leads Resist Heat
• Removable Probes with 4mm of Exposed
Metal for Use on Industrial Circuits
• Retractable Long Reach Alligator Clips
• Magnetic Hanger to Position and Hold
Meter to Steel Surfaces
• K-Type Temperature Probe
• Lightweight soft case to provide optimal
protection and storage
• Kit Offers a Solution for Maximum
Productivity of Industrial Electricians
Description
Industrial Multimeter Combo Kit
Stock No.
12M6081
Price Each
429.95
23M2642
484.95
Full-featured DMM with advanced electronic
troubleshooting functions plus probes and
hooks for delicate electronic measurements
all packed in a sleek, durable carrying case.
Designed to meet the demands of the electronics professional.
Mfg. Part No.
FLUKE-179/EDA2
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
FLUKE-87-5/E2 KIT CALIBRATED
Stock No. Price Each
25C4796
237.95
25C4800
247.95
25C4804
257.95
(68973)
60K7396
FLUKE-83-5 CALIBRATED Calibrated Industrial Digital Multimeter
FLUKE-87-5 CALIBRATED Calibrated Industrial Multimeter with Temperature 58K3279
Mfg. Part No.
FLUKE-87-5/E2 KIT
Description
Model 175 Digital Multimeter
Model 177 Digital Multimeter
Model 179 Digital Multimeter
Industrial Multimeter Combo Kit
Description
Electronics Combo Kit
Stock No.
31M7868
Price Each
292.95
(74088)
(78759)
ELECTRICIAN’S COMBO KIT
ELECTRICAL/HVAC COMBO KIT
9
Combo Kit Includes:
• Fluke 179 True-rms Digital Multimeter with
Backlight
• Fluke 1AC-II Non-Contact Voltage Tester
• Fluke TL224 Silicone Test Leads
• Fluke TP220 Industrial Test Probes
• Fluke AC220 Heavy Duty Alligator Clips
• Fluke 80BK-A Integrated Temperature Probe
• Fluke 35 Soft Carrying Case
Fluke 62 Mini Infrared Thermometer
• Accuracy: ±1.5% of reading
• Wide temperature range from -30°C to 500°C (-20°F to 932°F)
• Single point offset laser sighting
• Backlit display for poorly lit areas
Fluke T+PRO Voltage and Continuity Tester
• Three forms of ac/dc voltage detection: light, sound, and
vibration
• Extra heavy-duty, replacement test leads
• Safety rated CAT IV 600, CAT III 1000 V
• Continuity beeper
Multimeter and accessory combination designed
specifically for today’s electrician. Rugged 1000V
CAT III meter, and industrial strength test lead set,
and a non-contact voltage detector all in a durable
carrying case.
Fluke 1AC-II VoltAlert™ Non-Contact Voltage Detector
• Voltbeat technology continually tests its battery and circuitry
• Upon detection of voltage, tip glows and beeper sounds
• Voltage detection of 90 to 1000 VAC
• CAT IV 1000V
Mfg. part no. FLUKE-62/T+PRO/1AC electrical/HVAC combo kit includes compact Fluke 62 IR thermometer teamed
with the full featured T+PRO voltage tester and the easy-to-use 1-AC-II non-contact voltage detector. Use the IR
thermometer to test for overheating in electrical devices, then use the electrical test tools to find more about the
problem. Comes complete with soft case.
Mfg. Part No.
FLUKE-62/T+PRO/1AC
Description
FLUKE-62/T+PRO/1AC Kit with C115 Softcase
Stock No. Price Each
09R2347
189.00
Mfg. Part No.
FLUKE-179/1AC-II KIT
FLUKE-179/1AC-II KIT CAL
(74086)
2202
C-2202
M-2202
Stock No.
45M5421
Price Each
292.95
50M7190
337.95
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
(147957)
STIBOINFO((NEWARK_MAIN_C124_2202))
Description
Electricians Combo Kit
Y-2202
B-2202
USEXP1-2202
Electricians Combo Kit
ND3% BASE1
XXXX3803-2203-1-Page 2203 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:17 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
DIGITAL MULTIMETERS
FLUKE-117 TRUE-RMS DIGITAL MULTIMETER
AND FLUKE-322 CLAMP METER
ELECTRICIAN’S COMBO KIT
FLUKE 179
MULTIMETER
AND TOOLPAK™
COMBO KIT
Combo Kit Includes:
• Fluke-117 true-rms digital multimeter with non-contact
voltage detection
• Fluke-322 Compact clamp meter
• Mfg. part no. TL75 hard point test lead set
• Mfg. part no. TPAK ToolPak™ magnetic meter hanging
strap
• Mfg. part no. C115 deluxe carrying case with shoulder strap
Combo Kit Includes:
• Fluke 179 Meter (w/
Temperature)
• Two Universal Hanger clips
• Two hook & Loop Straps
• Strong Magnet
FLUKE 179 multimeter plus magnetic hanger (TPak) for hands free viewing.
Mfg. Part No.
FLUKE-179/TPAK
Description
True-RMS Digital Multimeter w/Magnetic
Hanging Kit
Stock No. Price Each
74C6496
272.95
(88091)
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
FLUKE-179/TPAK CALIBRATED True-RMS Digital Multimeter w/Magnetic
Hanging Kit
60K7388
317.95
TLK-220 US INDUSTRIAL
TEST LEAD KIT
(74091)
FLUKE 110 SERIES
DIGITAL MULTIMETERS
• VoltAlert™ technology noncontact voltage detection
• AutoVolt automatic AC/DC
voltage selection
• LoZ: low input impedance
prevents false readings due to
“ghost voltage”
• Large display and white LED
backlight to work in poorly lit
areas more effectively
• CAT III 600V safety rated
• UL listed, CSA certified, CE
compliant, VDE approved, TUV
FLUKE-117
approved
110 series digital multimeters have features and functions professional electricians need to get their job done. Mfg.
part no. Fluke-117 is the ideal DMM for demanding settings like commercial buildings, hospitals and schools. The
compact design makes it easy to hold and use one-handed. Mfg. part no. Fluke-116 has a built-in thermometer and is
specialized for HVAC applications including temperature and microamp measurements to quickly troubleshoot
problems with HVAC equipment and flame sensors. Mfg. part no. Fluke-115 is designed for a wide variety of electrical
and electronic testing applications. Mfg. part no. Fluke-113 is simple-to-use and has the features needed to repair
most electrical problems Using the Fluke VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. All models compatible with mfg. part no. TPAK ToolPak™ magnetic hanger for
hands-free operation; ordered separately below. These DMMs include mfg. part no. TL75 hard point test lead set,
registration and manual.
COMPARISON AT A GLANCE:
Mfg. Part No.
AC/DC Voltage
AC/DC Current
MicroAmps
VoltAlert™
AutoVolts
VCHEK™
LoZ
Resistance
Temperature
Capacitance
Frequency
Continuity
Min./Max./Avg.
Diode Test
Hold
Mfg. Part No.
FLUKE-117
FLUKE-116
FLUKE-115
FLUKE-114
FLUKE-113
Fluke-117
600V
10A Continuous
Fluke-116
600V
Fluke117/322 multimeter and clamp meter electrician’s combo kit is
the perfect solution to meet the demands of electrical professionals.
The NEW Fluke 117 DMM is paired with a Fluke 322 clamp meter for
productive and effective troubleshooting in one total solution. Includes
the NEW mfg. part no. C115 durable soft carrying case for protection
and easy meter transportation.
Mfg. Part No.
Description
Stock No. Price Each
267.95
FLUKE-117/322 Digital Multimeter and Clamp Meter Electrician’s Combo Kit 83K1722
Fluke-115
600V
10A Continuous
Fluke-114
600V
Included With Set:
• AC220 Plunger Style Alligator Clips
• AC285 Large Jaw Alligator Clips
• TP220 Sharp Test Probes
• TL224 Right-to-Straight Test
Leads
• Zippered Vinyl Carrying Case With
Moveable Divider
Special value SureGrip Set for industrial applications. Includes two sizes of alligator clips and sharp test probes for
reliable connections, test leads and a roomy carrying case to hold and protect your meter and all your accessories. All
1000V CAT III, 600V CAT IV related.
Mfg. Part No.
Description
Stock No.
Price Each
SureGrip Industrial Test Lead Kit
86H2845
117.00
TLK-220
(79154)
AC/DC CURRENT
CLAMP KITS
• For use with your
Fluke DMM to extend
the current ranges
• Choice of
noncalibrated or
calibrated models
Fluke-113
600V
These special-value current clamp kits are ideal for electrical professionals looking to add on DC and AC current
measurement capabilities to their DMM. Each kit includes a zippered, vinyl carry case with moveable divider. Case is
roomy enough to hold and protect current clamp (included) along with your own digital multimeter and accessories
NON-CALIBRATED KITS
●
●
●
●
●
●
●
●
●
40MΩ
40MΩ
40MΩ
60KΩ
Mfg. Part No.
I410-KIT
I1010-KIT
1nF to 9999µF
0.1Hz to 50kHz
1nF to 9999µF
0.1Hz to 50kHz
1nF to 9999µF
0.1Hz to 50kHz
1nF to 9999µF
CURRENT CLAMP ONLY
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
40MΩ
●
I800
I410
I1010
Description
AC/DC Current Clamp Kit
AC/DC Current Clamp Kit
Current Measuring
Range
Stock No. Price Each
400A (AC), 400A (DC) 02J7894
240.95
337.40
600A (AC), 1000A (DC) 85H0100
AC Current Clamp Probe
AC/DC Current Clamp
AC/DC Current Clamp
800A (AC)
55M0782
400A (AC), 400A (DC) 01F006
600A (AC), 1000A (DC) 01F007
244.00
194.65
316.40
CURRENT CLAMP ONLY WITH CALIBRATION AND PRINTED CERTIFICATION AND DATA REPORT
Description
Electrician’s True RMS Digital Multimeter
HVAC True RMS Digital Multimeter
True RMS Digital Multimeter
Electrical True RMS Digital Multimeter
Utility Digital Multimeter
Stock No. Price Each
83K1721
186.95
83K1719
176.95
83K1718
156.95
83K1717
129.95
94M4662
119.95
Softside Vinyl Meter Case
ToolPak Magnetic and Velcro Strap Tool Hanger
Replacement Test Leads
44F7741
97B3576
44F622
I410 CALIBRATED Calibrated AC/DC Current Clamp 400A (AC), 400A (DC) 57K9831
I1010 CALIBRATED Calibrated AC/DC Current Clamp 600A (AC), 1000A (DC) 57K9830
92F6683
Calibrated AC/DC Current Clamp
80I-110S
234.65
356.40
499.00
(79163)
ACCESSORIES
C25
TPAK
TL75
31.00
33.15
18.05
(88089)
(148859)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2203))
C-2203
M-2203
Y-2203
B-2203
USEXP1-2203
2203
9
ND3% BASE1
XXXX3804-2204-1-Page 2204 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:17 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
DIGITAL MULTIMETERS
METER AND ACCESSORY CASES
DATALOGGING HAND-HELD
DIGITAL MULTIMETERS
All Models:
• High-resolution 50,000 count display
• Unlimited datalogging
C510
CXT80
C550
CXT80, 170, 280 EXTREME CASES
• Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof
• Buoyancy allows case to float in salt water with 7.94 lb load
• Includes an automatic purge valve for quick equalization
• Features an exclusive neoprene O-ring and ABS latches for excellent seal
Mfg. Part No.
CXT80
CXT170
CXT280
Description
Extreme Case
Extreme Case
Extreme Case
Mfg. Part No. U1252A & U1253A Only;
• Built-in 20MHz frequency counter
• 0.5 to 4800Hz variable square wave
output
• 10A DC+AC measurement range
• Rechargeable battery with built-in
charger
C1600
Stock No.
12P9337
09R2344
67P4216
Price Each
155.95
155.95
155.95
C510 AND C520A LEATHER CASES
• Oiled genuine top-grain cowhide (brown)
• Rugged construction with heavy-duty stitching and reinforced rivets
• Large tool belt loop and top flap to secure meter
• C510 case designed for Fluke 110 and 170 series meters and most other Fluke DMMs, thermometers, and
process calibrators
• C520A case designed for Fluke T2 and T5 series electrical testers
Mfg. Part No.
C510
C520A
Description
Leather Meter Case
Leather Electrical Tester Case
Stock No.
01C1138
39C3071
U1252A
U1253A
Mfg. part nos.U1251A and U1252A datalogging DMMs provide high-accuracy and unique features. AC current and
voltage can be measured to 1MHz, with display of frequency on the dual display. The AC+DC current and voltage feature
separates AC and DC components of a signal and displays them simultaneously on the dual display, allowing user to
measure ripple on a DC source or DC offset on an AC signal. The datalogging feature on both models allows manual
storage of 100 points, interval storage of 200 points and unlimited storage when connected to a PC via mfg. part no.
U1173A IR-to-USB connectivity cable; ordered separately below. The supplied application software allows continuous
datalogging that is limited only by the user’s PC storage media. Mfg. part no. U1252A features a 20MHz frequency
counter and a square wave generator, variable in steps, with adjustable duty cycle. Both DMM models come complete
with a softside carrying case, test lead kit, quick-start guide, CD which includes user’s guide, application software and
instrument drivers, certificate of calibration and test report. Mfg. part no. U1251A also includes one 9V battery and mfg.
part no. 1252A includes one 7.2V rechargeable battery with AC adapter and power cord. Mfg. part no. U1253A is the
world’s first organic LED handheld digital multimeter.
SPECIFICATIONS
Price Each
53.65
41.70
Mfg. Part No.
DC Voltage Accuracy
DC Volts
AC Volts
DC + AC Volts
DC Current
AC Current
DC + AC Current
Resistance
Capacitance
AC Frequency Limit
Temperature
Conductance
DBm
DBV
Duty Cycle
Pulse Width
Diode Check
Square Wave Output
Frequency Counter
Safety Rating
C550 TOOL BAG
• Rugged, black and yellow ballistic cloth with heavy-duty hardware
• Steel reinforced frame
• Large, zippered storage compartment with 25 pockets
• Weather resistant
• Carry all your tools to the job
Mfg. Part No.
C550
Description
Tool Bag
Stock No.
06C0817
Price Each
77.50
Stock No.
44F7741
Price Each
31.00
C25 LARGE, SOFT VINYL METER CASE FOR DMMs
• Zippered, black and yellow soft vinyl case with padding
• Inside pocket
Mfg. Part No.
C25
Description
Large, Soft Vinyl Meter Case
C90 SOFT VINYL METER CASE
• Zippered, black and yellow soft vinyl case
• Inside pocket and belt loop
Mfg. Part No.
C-90
Description
Soft Vinyl Meter Case
Stock No.
44F597
Price Each
29.65
C125 SOFT FABRIC METER CASE
• Zippered, black and yellow fabric case
• Detachable external pouch
Mfg. Part No.
C125
Description
Soft Fabric Meter Case
Stock No.
16F6985
Mfg. Part No.
C789
9
Description
Fabric Meter and Accessory Case
Stock No.
92F7017
Price Each
101.65
C1600 GEAR BOX FOR METER AND ACCESSORIES
• Deep interior, lift-out tray keeps everything organized
• Rubber gasket in lid seals out dust and keeps contents dry
• Includes five hook and loop straps to wrap cords and test leads when not in use
• Can be locked
• Large carry handle for comfortable hauling
Mfg. Part No.
C1600
Description
Gear Box
Stock No.
81H6396
Mfg. Part No.
U1173A
U1160A
U1161A
U1180A
Price Each
47.20
Stock No.
26K2562
Price Each
47.65
(61079)
(148860)
2204
STIBOINFO((NEWARK_MAIN_C124_2204))
C-2204
M-2204
1000
1000
1000
10
10
10
500MΩ
50MΩ
100mF
1MHz
-200 to 1372°C
500nS
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
0.5Hz - 4800Hz
20MHz
EN61010-1 to 1000V CAT III, 600V CAT IV
Description
IR-to-USB Connectivity Cable Assembly
Standard Test Lead Kit
Extended Test Lead Kit
Temperature Probe Thermocouple Accessory Kit
(89359)
Description
Hardside Carrying Case
U1253A
0.025%
Stock No. Price Each
04M7393
402.00
04M7394
442.00
12P6194
450.00
ACCESSORIES
Mfg. part no. U1160A standard test lead kit includes: test probe leads rated 1000V/15A, fine-tip test probes rated
300V/3A , SMT grabber and mini-grabber clips both rated 300V/3A and alligator clips rated 1000V/10A. Mfg. part no.
U1161A extended test lead kit includes: extended test leads and extension test probes both rated 1000V/15A, medium
alligator clips and 4mm banana plugs both rated 600V/10A. Mfg. part no. U1180A temperature probe thermocouple
accessory kit (limits the temperature range to -20° to +200°C) includes: non-compensation transfer adapter, yellow
K-type tip thermocouple and black J-type tip thermocouple.
FLUKE-C101 HARDSIDED CARRYING CASE FOR INDUSTRIAL TEST TOOLS
• Tough, black polyprophylene exterior shell measures 12 x 14.2 x 4.1″
• Interior cavity measures 9 x 11.5 x 2.5″
• Configure diced foam interior to fit, store and protect all Fluke test tools
• Durable molded latches and handle
Mfg. Part No.
FLUKE-C101
U1252A
Mfg. Part No.
Description
U1251A Datalogging Hand-Held Digital Multimeter
U1252A Datalogging Hand-Held Digital Multimeter with Frequency
Counter and Square Wave Output
U1253A Datalogging Hand-held Digital Multimeter w/OLED Display
Price Each
32.00
C789 FABRIC METER AND ACCESSORY CASE
• Large black fabric carrying case with 3 compartments
• Removable handle and shoulder strap
U1251A
0.03%
Y-2204
B-2204
USEXP1-2204
Stock No. Price Each
04M7391
30.23
04M7389
60.47
04M7390
42.33
04M7392
35.25
ND3% BASE1
XXXX3805-2205-1-Page 2205 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:17 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
DIGITAL MULTIMETERS
HAND-HELD DIGITAL
MULTIMETERS
COMPACT MULTIMETERS WITH MAGNE-GRIP™ HOLSTER AND
VOLTECT™ (CONT.)
Both Models:
• 10,000 count display
• 0.09% basic DCV accuracy
• True RMS AC measurement
• Basic functions: ACV, DCV, ACI,
DCI, resistance, frequency,
diode, continuity test
• Advanced functions:
capacitance, temperature,
MINMAX recording
Mfg. Part No. U1242A Only:
• Manual data logging
• Built-in switch counter,
harmonic ratio
• Dual/differential temperatures
U1242A
capabilities
Mfg. part nos.U1241A and U1242A enable checking more with wide measurement ranges. Feature true RMS on their
10,000 count displays. Dual-level backlighting allows operaton even in subdued lighting conditions while prolonging
battery life. Built-in switch counter, harmonic ratio, dual temperature and differential temperature capabilities can be
accessed with the press of a button. Rated CAT III 1000 V, CAT IV 600V protection. Both DMM models come complete
test lead kit, quick-start guide, CD which includes user’s guide, application software and instrument drivers, certificate
of calibration, and four 1.5V AAA alkaline batteries.
SPECIFICATIONS-U1241A & U1242A
DC Voltage Accuracy
DC Volts
AC Volts
DC Current
AC Current
DC + AC Current
Resistance
Capacitance
AC Frequency Limit
Temperature
Safety Rating
0.09%+5
1000V
1000V
10A
10A
10A
100MΩ
10mF
1MHz
-40°C to 1000°C
1000V CAT III Overvoltage Protection, 600V CAT IV
Mfg. Part No.
DC / AC Current
Resistance
Capacitance
Temperature
Frequency
Mfg. Part No.
5XP-A
15XP-A
35XP-A
15XP-A
200µa TO 2A
200 Ohm - 20 MOhm
...
...
...
35XP-A
400uA to 2A
400 Ohm to 40 MOhm
4nF - 400 µF
20 to 1000°C, (-4 to 1832°C)
4KHZ to 1MHz
Description
Compact DMM w/Non-Contact Voltage Detector
Compact DMM w/Logic Test, Non-Contact Voltage Detector
Compact DMM w/Temperature, Frequency and Capacitance
Stock No. Price Each
29M6539
42.95
29M6212
62.95
29M6228
83.95
(79168)
MODEL 30XR-A DIGITAL
MULTIMETER
• Built-in Non-Contact Voltage Detector with Audible and Visual Indicators
• Data Hold
• Min./Max. Value Recording
• Continuity, Diode Test and Battery Test (1.5V, 9V)
• DC Volts Ranges: 200mV, 2V, 20V, 200V, 600V
• AC Volts (45Hz - 500Hz) Ranges: 200mV, 2V, 20V, 200V, 600V
• DC Current Ranges: 200µA, 2mA, 20mA, 200mA, 10A
• AC Current (45Hz - 500Hz) Ranges: 200µA, 2mA, 20mA, 200mA,10A
• Resistance Ranges: 200Ω , 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ
• CAT II 600V, CAT III 300V Rated, CE
• UL and cULus Listed
• One-Year Warranty
3 1⁄2 digit LCD, 2000 count, low battery indication. Dimensions: 195 x 91 x 60mm ( 7.7 x 3.5 x 2.4″). Weight: approx.
426gr. ( 0.94 lbs.) including battery. Shipped with test leads, 9V battery (installed), Magne-Grip™ holster with magnet
hanging strap and operating instructions. Non-contact voltage indicator. Indicates AC voltages: 70V to 600VAC, red LED
and speaker both indicate presence of AC voltages in this range.
Mfg. Part No.
30XR-A
SPECIFICATIONS-U1242A ONLY
Description
Model 30XR Digital Multimeter
Stock No.
29M6225
Price Each
64.95
(72225)
Manual Data Logging
Built-in Switch Counter, Harmonic Ratio
Dual/Differential Temperatures Capabilities
●
●
●
DIGITAL MULTIMETERS
Mfg. Part No.
Description
U1241A Handheld Digital Multimeter
U1242A Handheld Digital Multimeter with Data Logging
Stock No. Price Each
53M4052
201.00
53M4053
221.00
ACCESSORIES
Mfg. part no. U1181A immersion probe measures temperature of food, oil, and other liquids within -50° to +700°
range. Mfg. part no. U1182A industrial surface probe measures still surface temperature within -50° to +400°
range.Mfg. part no. U1183A air probe measures dryer, transport pipe and surrounding air temperature within -50° to
+800° range. Mfg. part no. U1583A AC current clamp extends current measurement range up to 400A.
U1162A
U1163A
U1164A
U1181A
U1182A
U1183A
U1184A
U1185A
U1186A
U1583A
5XP-A
200µA to 200mA
200 Ohm to 20 MOhm
...
...
...
Alligator Clip
SMT Grabber
Fine Tip Test Probe
Immersion Temperature Probe
Surface Temperature Probe
Air Temperature Probe
Temperature Probe Adapter
Thermocouple ( J-type) and Adaptor
Thermocouple ( K-type) and Adaptor
Current clamp (400A)
53M4043
53M4044
53M4045
53M4046
53M4047
53M4048
53M4049
53M4050
53M4051
53M4054
10.07
10.07
10.07
59.39
180.00
69.47
10.07
20.04
20.04
139.00
TWEEZER STYLE PASSIVE
COMPONENT R/C SMD
• 4000 count LCD
• Measures resistance,
capacitance, and diode test
• Relative mode for zero or user
supplied reference
• Overange and low battery
indicators
• Auto power ofF
Mfg. part no. RC100 one-hand operation for fast,
precise identification and measurement of surface
mount components. Comes complete with two AG13
batteries and slide cover for storage.
Mfg. Part No.
Description
Tweezer Style Passive Component R/C SMD
RC100
Stock No.
61M1002
Price Each
59.99
(148528)
DIGITAL CLAMP MULTIMETER
WITH TEMPERATURE
(100234)
Features:
• 1999 count autoranging display
• Diode test
• Continuity buzzer
• Data hold
• Sleep mode
• Full icon display
• Low battery indicator
COMPACT MULTIMETERS WITH
MAGNE-GRIP™ HOLSTER AND
VOLTECT™
Features:
• 2000-Count (Mfg. part no. 35XP-A) 4000-Count Display
• Voltect™, Non-Contact Voltage Detection, 70 to 600VAC, 50Hz ∼ 60Hz
• DC Voltage and AC Voltage Measurements
• DC Current and AC Current Measurements
• Resistance, Continuity, Diode Test
• Logic Test TTL to 20MHz (Mfg. part no. 15XP-A)
• Capacitance, Temperature and Frequency (Mfg. part no. 35XP-A)
• Range Lock, Data Hold, Input Jack Warning Tone (Mfg. part nos.
15XP-A and 35XP-A)
• One-Year Warranty
9
Specifications: Range
• DC voltage: 200mV, 2V, 20V, 200V, 600V
• AC voltage: 2V, 20V, 20V, 600V
• AC current: 2A, 20A, 200A, 400A
• Resistance: 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ
• Temperature: -40°F – +1832°F
Digital Clamp Multimeter with Temperature Measurement is perfect for general purpose applications including HVAC
and appliance repair. Comes complete with zipper case, test leads, two AAA batteries and owners manual.
35XP-A
Three new compact multimeters from Meterman. The 5XP-A, 15XP-A, and 35XP-A include MagneGrip™ Holster and
Voltect™. The exclusive Magne-Grip™ holster wih magnetic hanging strap frees both your hands for work, and
Voltect™ , a non-contact voltage dector, allows the quick detection of dangerous AC voltages without probing.
Mfg. Part No.
72-7222
Description
Digital Clamp Multimeter with Temperature
Stock No.
01N4891
Price 1-999
37.95
(93048)
SPECIFICATIONS
Mfg. Part No.
DC Voltage
AC Voltage
5XP-A
15XP-A
200mV - 1000V
(5 Ranges)
200MV - 750V
(5 Ranges)
35XP-A
400mV - 1000V
(5 Ranges)
400mV - 750V
(5 Ranges)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2205))
C-2205
M-2205
Y-2205
B-2205
USEXP1-2205
2205
ND3% BASE1
XXXX3806-2206-1-Page 2206 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:17 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
DIGITAL MULTIMETERS
POCKET DMM WITH BARGRAPH
ADVANCED DIGITAL MULTIMETERS (CONT.)
Mfg. Part No.
Stock No.
Capacitance
Temperature
Frequency
Fused 10A range
Duty Cycle
Relative mode
RS232C
Calibration
Min/Max
Peak/Avg
Conductance
Safety
Features:
• 31⁄2 -Digit LCD with Bargraph
• 3200-Count Display
• Over Range Indicator
• Auto Power-Off
• Data Hold, Range Hold
• Continuity and Diode Test
• Low-Battery Indicator
• 450VDC/AC RMS Overload Protection
• 90-Day Manufacturer’s Warranty
• Includes Battery and Owner’s Manual
• CE Compliant
SPECIFICATIONS
AC Volts
DC Volts
Resistance
Mfg. Part No.
72-4040
3V - 450V
300mV - 450V
300Ω - 30MΩ
Description
Pocket Digital Multimeter
Stock No.
66F1961
Price Each
45.60
Features:
• Large 19,999 count backlit display • Data logging and data recall
with analog bargraph
• Max/min mode
• True RMS Measurement
• Sleep mode
• Selectable auto/manual range
Specifications: Range
• DC voltage: 200mV, 2V, 20V, 200V, 1000V
• AC Voltage: 2V, 20V, 200V, 1000V
• DC Current: 200uA, 2000uA, 20mA, 200mA, 10A
• AC Current: 200uA, 2000uA, 20mA, 200mA, 10A
• Resistance: 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ
• Capacitance: 20nF, 200nF, 2uF, 20uF, 200uF, 2mF, 20mF
• Temperature: -40°F - 1832°F
• Frequency: 20Hz, 200Hz, 2KHz, 20KHz, 200KHz, 2MHz, 20MHz, 200MHz
• Duty Cycle: 10% - 90%
• Current Loop: 4 - 20mA displays 0 - 100%
• Input Impedance: 10MΩ
• Dimensions: 8″ x 3 5⁄8″ x 1 1⁄2″ (H x W x D)
Full function multimeter offers a variety of ranges for every service application and an optically isolated USB interface.
Includes four foot opto-coupled USB cable, data logging software, standard test leads, short clip leads for accurate
capacitance measurement, alligator clip adaptors, standard 9V battery, soft case and instruction manual.
Mfg. Part No.
72-7730
Description
True RMS Multimeter with USB Interface
Stock No.
45M5527
X
4000
±0.8%+1
400mV to
1000V
4V to 750 V
400uA to 10A
400uA to 10A
40 Ohm to
40 Mohm
40 nF - 100 µF
AC V
DC A
AC A
Ohms
Capacitance
Temperature
Price Each
1-9
159.67
Frequency
Fused 10A range
Duty Cycle
Relative mode
RS232C
Calibration
Min/Max
Peak/Avg
Conductance
Safety
9
72-7735C, 72-7745C
72-7740C, 72-7750C
10Hz to
10MHz
X
X
X
X
X
72-7740
CALIBRATED
W/DATA
02J7831
X
X
4000
±0.8%+1
400mV to
1000V
4V to 750 V
400uA to 10A
400uA to 10A
400 Ohm to
40 MOhms
40 nF - 100 µF
-40°C to
1000°C
10Hz to
10MHz
X
X
X
X
(83983)
NON-CALIBRATED UNITS
Mfg. Part No.
Stock No.
Backlight
Auto ranging
Bargraph
True rms
Display counts
DCV accuracy
DC V
AC V
DC A
AC A
Ohms
72-7770
02J5547
X
72-7765
02J5546
72-7720
02J5538
X
72-7725
02J5539
X
2000
±0.5%+2
200 mV to 500 V
4000
±0.8%+1
400 mV to 500 V
2000
±0.5%+1
200 mV to 1000 V
200V to 500 V
2000uA to 10A
4V to 500 V
400uA to 10A
400uA to 10A
400 Ohm to 40
MOhm
200 mV to 750 V
20uA to 20A
20uA to 20A
200 Ohm - 200
MOhm
20000
±0.5%+1
200 mV to 1000
V
2V to 750 V
2mA to 20A
2mA to 20A
200 Ohm - 200
MOhm
200 Ohm - 200
MOhm
(148861)
2206
STIBOINFO((NEWARK_MAIN_C124_2206))
C-2206
M-2206
Price Each
12.69
19.95
30.25
37.95
Y-2206
B-2206
72-7750
CALIBRATED
W/DATA
02J7833
X
X
72-7745
CALIBRATED
72-7755
W/DATA
CALIBRATED
02J7832
73K2532
X
X
X
X
X
X
6000
4000
4000
±0.5%+3
±0.8%+1
±0.8%+1
600mV to
400mV to
400mV to
1000V
1000V
1000V
600 mV-1000 V 4V to 750 V
4 to 750 V
60mA to 10A 400uA to 10A 400uA to 10A
60mA to 10A 400uA to 10A 400uA to 10A
600 Ohm to
400 Ohm to
400 Ohm to
60 MOhm
40 MOhm
40 MOhm
6 nF - 6 mF
4 nF - 40 mF
-40°C to
-40°C to
-40°C to
1000°C
1000°C
1000°C
6kHz to
10Hz to
4kHz to
60MHz
10MHz
400 MHz
X
X
X
X
X
X
X
X
X
X
X
X
X
IEC 1010, 1000V CAT II, 600V CAT III, CE
Mfg. Part No.
72-7735 CALIBRATED W/DATA
72-7740 CALIBRATED W/DATA
72-7750 CALIBRATED W/DATA
72-7745 CALIBRATED W/DATA
72-7755 CALIBRATED
72-7755C
• 1-Year Warranty
• Great Meters, Great Values
• Data Hold (Except 72-7765)
• Selected Models Calibrated with
• Diode and Continuity Tests
Documentation
New digital multimeters’ advanced designs use high-resolution A/D converters and microcontrollers. Performance,
versatility, and safety are optimized for the most demanding applications. All models include test leads, holster, manual,
and batteries.
72-7725
02J5539
2 nF-20 µF
-40°C to 1000°C
2kHz to 20kHz
IEC 1010, 1000V CAT II, 600V CAT III, CE
Stock No.
02J5547
02J5546
02J5538
02J5539
72-7735
CALIBRATED
W/DATA
02J7830
Mfg. Part No.
Stock No.
Backlight
Auto ranging
Bargraph
True rms
Display counts
DCV accuracy
DC V
ADVANCED DIGITAL MULTIMETERS
72-7720
72-7725
IEC 1010, 600V CAT I, 300V CAT II,
CE
72-7720
02J5538
2 nF - 100 µF
CALIBRATED UNITS WITH CERTIFICATION AND DATA REPORT
(93043)
72-7770
72-7765
72-7765
02J5546
Mfg. Part No.
72-7770
72-7765
72-7720
72-7725
(5427)
TRUE RMS MULTIMETER WITH
USB INTERFACE
72-7770
02J5547
USEXP1-2206
Stock No.
02J7830
02J7831
02J7833
02J7832
73K2532
IEC 1010,
1000V CATIII,
600V CAT IV,
CE
Price Each
71.63
80.99
122.95
119.00
149.00
ND3% BASE1
XXXX3807-2207-1-Page 2207 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:18 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
DIGITAL MULTIMETERS • VOLTAGE TESTERS
TEST BENCH® HIGHPERFORMANCE DIGITAL
MULTIMETERS
T+ AND T+PRO ELECTRICAL TESTERS (CONT.)
Mfg. Part No.
T+PRO-1AC KIT
T5-KIT
AC220
TP1
Features:
• Resistance measurement
• Diode check
• Frequency measurement
• Audible continuity
• All current ranges fused
• Ruggedized case
• Auto power off
• Designed to Meet IEC61010-1 CATIII
1000V, Class 2
• Three-year manufacturer’s warranty
Mfg. Part No.
388B
389A
390A
391A
Price
Each
104.95
40.90
30.10
14.45
AC VOLTAGE DETECTORS
389A
SPECIFICATIONS
Frequency
Temperature
Min./Max. Peak
Hold, Rel. Mode
Data Hold
Duty Cycle
RS-232
Interface and
Software
Stock No.
30M9580
97H3607
81C7979
83F2783
(90368)
Test Bench® high-performance, multifunctional DMMs include component test capabilities, resistance, and capacitance. Tough, dual-injection molded case allows for a better grip and more protection for meter. Includes 9V battery,
test leads, thermocouple temperature probe (mfg. part no. 390A only) and instruction manual. UL listed, CE compliant.
Calibration with printed certification and data report is available on all models, go online or call Newark.
Mfg. Part No.
True RMS
DCV Accuracy
Display Count
Bargraph
Ranging
Transistor Test
Logic Probe
AC/DC Voltage
AC/DC Current
Capacitance
Resistance
Description
T+PRO Electrical Tester and VoltAlert AC Voltage Detector Kit
Starter Kit for T5 Electrical Tester
SureGrip Alligator Clips
Flat Bladed Test Probes
388B
389A
390A
391A
X
0.0005
20000
0.005
4000
Manual
X
X
750 VAC/1000 VDC
20A
4 nF - 40 µF
400 Ohm to 40
MOhm
0.0025
4000
X
Auto/Manual
0.001
4000
X
Auto/Manual
750 VAC/1000 VDC
20A
4 nF - 40 mF
400 Ohm to 40
MOhm
750 VAC/1000 VDC
20A
4 nF - 40 mF
400 Ohm to 40
MOhm
To 4MHz
To 40MHz
X
To 40MHz
58° to 2372°F
X
X
X
Mfg. Part No. TIC 300HV Features:
• 9 VDC power supply
• Audible signal
• Lightweight yet rugged
• Integrated switchguard
• Made in the USA
Mfg. Part No. TIC 410A Features:
• Up to 121kV
• 48″ long
Manual
X
750 VAC/1000 VDC
20A
200 Ohm, 2 kOhm,
20 kOhm, 200
kOhm, 2 MOhm, 20
MOhm
To 200kHz
Mfg. part no. TIC 300HV is used to check fuses, breaker panels, power outlets, load break
connectors, transmission lines, etc. and detects AC voltage without connection. Operating
temperature 32°F to 125°F (0°C to 52°C).
Mfg. Part No.
TIC 300HV
TIC 410A
TIC 300HV
Stock No.
72M4734
72M4735
Price Each
79.95
109.95
(147138)
X
X
Stock No.
22C6856
22C6857
22C6858
Price Each
1-2
149.85
155.00
194.25
22C6859
195.00
60K7400
250.00
• The 1AC-II continually tests its battery and its
circuit integrity
• Fluke Voltbeat™ technology
• The 1AC-II and 1LAC-II are Category IV – 1000 V
overvoltage rated
• Voltage detection of 90 to 1000 VAC, 1LAC-II
range: 20 to 1000 VAC control circuit model
• Rugged, reliable, and have two-year warranty
Mfg. Part No. Fluke 1AC-II and 1LAC-II ac voltage detectors, with VoltAlert™ non-contact voltage detection, are easy
to use - just touch the tip to a terminal strip, outlet, or cord. When tip glows red and unit beeps, there’s voltage in the line.
Allow users to quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.
Mfg. Part No.
FLUKE-1AC-A1-II
FLUKE-1LAC-A-II
FLUKE-1AC-A1-II 5 PK
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
391A CALIBRATED Test Bench Digital Multimeter with True rms
Description
Tic Tracer - AC Voltage Detector
Hot Stick
FLUKE-1AC-II/1LAC-II
VOLTALERT NON-CONTACT
VOLTAGE DETECTORS
X
Description
Basic Test Bench Digital Multimeter
Test Bench Digital Multimeter with Bargraph
Test Bench Digital Multimeter with Bargraph, RS-232
Interface and Software
Test Bench Digital Multimeter with True rms
TIC 410A
(5416)
Description
VoltAlert AC Voltage Detector, 90 to 1000VAC
VoltAlert AC Low-Voltage Detector, 20 to 90VAC
VoltAlert AC Voltage Detector Kit, Pkg. of 5
Stock No. Price Each
55K3325
25.95
55K3327
25.95
04M4406
109.95
Starter Kit for T5 Electrical Tester
SureGrip Alligator Clips
Flat Bladed Test Probes
97H3607
81C7979
83F2783
ACCESSORIES
T5-KIT
AC220
TP1
T+ AND T+PRO
ELECTRICAL TESTERS
(6534)
• Uses 3 forms of AC/DC voltage detection:
light, sound and vibration
• AC/DC voltage: 12 to 600V on LED bar, 10.2
to 600V on LCD (T+PRO only)
• Replaceable, heavy-duty test leads
• Continuity beeper
• Bright LED flashlight
• GFCI trip
• On/Off switchable beeper
• Compliant with NFPA 70E recommendations
• UL listed, CSA certified, CE compliant
NON-CONTACT AC
VOLTAGE DETECTOR
T+PRO
Safer than traditional solenoid testers, mfg. part nos. T+ and T+PRO electrical testers use all three voltage detection
methods: light. sound and vibration, to work more efficiently in noisy environments, dimly lit areas or tight spaces. Mfg.
part no. T+PRO is the perfect choice for demanding commercial and industrial applications, with its voltage and
continuity measurement, a Rotary Field indicator, resistance to 9.99kΩ and a LCD digital display with 0.1V resolution
and ″hold″ feature for easier viewing in hard-to-test areas. Basic electrical tester, mfg. part no. T+ is ideal for
residential electricians and HVAC techs who need a durable, reliable tool for testing voltage and continuity. All models
include test leads and probes, test lead strap for managing leads, two AAA batteries and 2-year manufacturer’s
warranty. Mfg. part no. T+PRO-1AC KIT also includes mfg. part no. FLUKE-1AC-II VoltAlert™ pocket-sized,
non-contact AC voltage detector. Mfg. part no. T5-Kit is a starter kit for use with the Fluke T5 electrical tester. Includes
mfg. part no. TP220 SureGrip test probes with removable comfort grips, mfg. part no. AC285 SureGrip large jaw
alligator clips and mfg. part no. C33 zippered soft case. SureGrip™ alligator clips are designed to improve steadiness in
slippery hands. Blunt tip grabs round screw heads up to 9.5 mm. Includes one pair (red, black) of small, insulated, nickel
plated jaws. Mfg. part no. TP1 flat blade design holds securely in blade type electrical wall sockets. Includes one pair
(red, black) of slender probe bodies.
Mfg. Part No.
T+ Electrical Tester
T+ US
T+PRO US T+PRO Electrical Tester
Description
Stock No.
30M9569
30M9570
• Built-in flashlight
• Detector glows blue when
AC voltage is present
• Detector glows red when it
is at the source
• 40V to 300VAC
C-2207
M-2207
9
Mfg. part no. LVD1 non-contact AC voltage detector and LED flashlight is combined in one convenient, compact design.
With exclusive dual-sensitivity. The voltage detector glows blue when it’s 1-5″ or 2.5-12.5cm away from the source AC
voltage, and glows red when it’s at the source. Detects voltages from 40 V AC to 300 V AC. Voltage detector glows blue
50 Hz - 60 Hz or 2.5 - 38 cm (1 - 5″) away from source. Operating temperature 0 °C to 50 °C. Ultra-bright white LED with
100,000 hour bulb life. AAA battery included.
Mfg. Part No.
Description
Stock No.
Price Each
Volt Light
11J3453
28.25
LVD1
(84888)
Price
Each
49.95
88.95
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2207))
40.90
30.10
14.45
Y-2207
B-2207
USEXP1-2207
2207
ND3% BASE1
XXXX3808-2208-1-Page 2208 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:18 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
VOLTAGE TESTERS • CLAMP METERS
FLUKE-T5-600 AND -1000
VOLTAGE/CONTINUITY/
CURRENT TESTERS
L215 SUREGRIP™ KIT WITH PROBE LIGHT
AND PROBE EXTENDER
• Compact Design with Probe
Storage
• Automatically Measures Volts AC
and Volts DC with Precise Digital
Resolution
• Resistance and Continuity Beeper
• Easy and Accurate OpenJaw™
Current Measurement to 100 A ac
• Available in 600V and 1000V
Models
• Mfg. part no. T5-600 meets 600
V CAT III safety standards (IEC
1010-1)
• Mfg. part no. T5-1000 meets
1000 V CAT III, 600 V CAT IV
safety standards (IEC 1010-1)
• UL listed, CSA certified, CE
compliant
• Includes L200 Probe Light, TP220 SureGrip™
Test Probes, TL224 SureGrip™ Test Lead, TP280
Test Probe Extenders, Soft Foldable Pouch
• SureGrip™ Accessories Provide Better Contact
for Better Measurements
• Small, Rugged Light Frees Both Hands for Work
• 8″ Test Probe Extenders Keep Hands Always
From Live Circuits
Mfg. Part No.
L215
Description
600V Voltage/Continuity/Current Tester
1000V Voltage/Continuity/Current Tester
Stock No.
91F6069
91F6070
Price
Each
104.95
130.95
57K9849
57K9848
144.95
170.95
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
T5-600 USA CALIBRATED
T5-1000 CALIBRATED
Calibrated 600V Voltage/Continuity/Current Tester
Calibrated 1000V Voltage/Continuity/Current Tester
ACCESSORIES
Leather Tester Case
Holster
Starter Kit for T5 Electrical Tester
39C3071
83F2779
97H3607
41.70
24.05
40.90
ACCESSORIES
Fluke 62 Mini Infrared Thermometer
Fluke 1AC-II VoltAlert™ Non-Contact
• Accuracy: ±1.5% of reading
Voltage Detector
• Wide temperature range from -30°C to 500°C (-20°F
• Voltbeat technology continually tests its
to 932°F)
battery and circuitry
• Single point offset laser sighting
• Upon detection of voltage, tip glows and
• Backlit display for poorly lit areas
beeper sounds
Fluke T+PRO Voltage and Continuity Tester
• Voltage detection of 90 to 1000 VAC
• Three forms of ac/dc voltage detection: light, sound,
• CAT IV 1000V
and vibration
• Extra heavy-duty, replacement test leads
• Safety rated CAT IV 600, CAT III 1000 V
• Continuity beeper
Mfg. part no. FLUKE-62/T+PRO/1AC electrical/HVAC combo kit includes compact Fluke 62 IR thermometer teamed
with the full featured T+PRO voltage tester and the easy-to-use 1-AC-II non-contact voltage detector. Use the IR
thermometer to test for overheating in electrical devices, then use the electrical test tools to find more about the
problem. Comes complete with soft case.
Mfg. Part No.
C520A
H5
T5-KIT
FLUKE-62/T+PRO/1AC
Description
Leather Tester Case
Holster
Starter Kit for T5 Electrical Tester
FLUKE-62/T+PRO/1AC Kit with C115 Softcase
Stock No.
39C3071
83F2779
97H3607
09R2347
Price
Each
41.70
24.05
40.90
189.00
(19028)
TLK-225 SUREGRIP™
MASTER ACCESSORY SET
SureGrip™ Set Includes:
• AC220 Plunger Style Alligator Clips
• AC280 Plunger Style Hook Clips
• AC283 Plunger Style Pincer Clips
• AC285 Large Jaw Alligator Clips
• TP220 Sharp Test Probes
• TL224 Right-to-Straight Test Leads
• 6-Pocket Storage Pouch
Special value SureGrip™ Master Set is a complete selection of test tool accessories for any industrial application.
Includes a convenient toll-up pouch that neatly stores each accessory. 1000V CAR III, 600V CAT IV rated.
Mfg. Part No.
TLK-225
Description
SureGrip Master Accessory Set
Stock No.
02J7895
Price Each
117.00
LVD2 VOLT LIGHT NON-CONTACT AC VOLTAGE
DETECTOR AND LED FLASHLIGHT
• Dual Sensitivity
• Ultra-bright LED light with
100,000 hour-life
• Detects from 90 to 600V AC
Mfg. part no. LVD2 non-contact AC voltage detector and LED flashlight are combined into one easy-to-use, pen-style
design. Suitable for commercial and industrial applications. Dual levels of detection — blue indicates proximity (1” to 5”)
to AC voltage source and red indicates when at the source. CAT IV 600V rated. Includes one AAA battery.
Mfg. Part No.
LVD2
Price Each
32.10
Non-contact voltage tester detects AC voltage through a fully
insulated probe tip without the risk of contacting live electrical
wires. Dual audible (beeping) and visual (flashing) indicators signal
the presence of AC voltage. Tests from 50-600VAC. Ideal for
locating breaks in wires and voltage at receptacles, switches, and
motors. Quickly locates the hot and neutral terminals in any
receptacle. Built-in “safe-test” feature indicates tester and batteries are operating properly. UL listed.
Stock No.
92N4750
Price Each
19.97
(16531)
FLUKE 320 SERIES
CLAMP METERS
H5 Custom Holster
• Designed for T5 Tester
• Rugged Fabric Holster
• Includes Flap for Lead
Stoage
• Built-in Belt Loop
Description
Voltage, Continuity and Current Tester Kit w/Holster
Stock No. Price Each
02J7897
161.95
(79157)
• Precise Low Current Measurements With
Better Than 2% Basic Accuracy
• Controls Positioned for One-Hand Operation
• Auto Shut-Off, Display Hold, Continuity Test
• Safety Rating: IEC 1010-2-031, 600V CAT III
• Two-Year Warranty
• Includes (2) AAA Batteries, Test Leads,
Instruction Card, Safety Information and Soft
Carrying Case
• Recommended accessories: H3 Holster,
TL223 Test Lead Set, AC285 Alligator Clips
Fluke-321
Certificate of calibration available on all models, go online or call Newark.
Specifications
321
AC Current Range
0-400.0A
AC Volts
0-400.0V, 400-600V
2208
STIBOINFO((NEWARK_MAIN_C124_2208))
Stock No.
30M9568
CIRCUIT ALERT™ AC VOLTAGE TESTER
Mfg. Part No.
2557
Fluke T5-1000 Features:
• Automatically Measures Up to 1000VAC or DC
• Measures Up to 100.0A AC
• Measures Resistance to 1000Ω
• OpenJaw™ Technology Lets You Measure Current
Without Breaking The Circuit
Fluke VoltAlert™ Features:
• Easy To Use
• Detects 90-1000VAC
• Fits in Shirt Pocket For
Convenience
• Detects Voltage Without
Metallic Contact
Description
Volt Light
(90367)
T5-H5-1AC VOLTAGE, CONTINUITY AND
CURRENT TESTER KIT WITH HOLSTER
Mfg. Part No.
T5-H5-1ACKIT/US
Price Each
72.55
(79146)
C520A
H5
T5-KIT
9
Stock No.
96H1189
(79136)
FLUKE-62/T+PRO/1AC
T5-1000
Troubleshoots a wider range of problems safer and faster than a traditional solenoid tester. T5 series voltage/continuity/
current testers provide a variety of measurements in one compact testing unit. Measure up to 100A AC current and 1000
ohm resistance. Mfg. part no. T5-600 measures AC or DC voltage to 600V. Mfg. part no. T5-1000 measures AC or DC
voltage to 1000V. Includes 4mm detachable probes, instruction sheet, and 2-year manufacturer’s warranty. Order
leather carrying case, holster, or starter kit , that attaches to a belt and neatly stows test leads, separately below.
Mfg. part no. FLUKE-62/T+PRO/1AC electrical/HVAC combo kit includes compact Fluke 62 IR thermometer teamed
with the full featured T+PRO voltage tester and the easy-to-use 1-AC-II non-contact voltage detector. Use the IR
thermometer to test for overheating in electrical devices, then use the electrical test tools to find more about the
problem. Comes complete with soft case.
Mfg. Part No.
T5-600 USA
T5-1000
Description
SureGrip Kit with Probe Light and Probe Extender
C-2208
M-2208
Y-2208
B-2208
USEXP1-2208
322
0-40.00A, 40.0-400.0A
0-400.0V, 400-600V
ND3% BASE1
XXXX3809-2209-1-Page 2209 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:18 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
CLAMP METERS • PROCESS METERS & CALIBRATORS
FLUKE-360 AC LEAKAGE
CURRENT CLAMP METER
FLUKE 320 SERIES CLAMP METERS (CONT.)
Specifications
DC Volts
Resistance Range
321
N/A
0-400.0Ω
Mfg. Part No.
FLUKE-321
FLUKE-322
322
0-400.0V, 400-600V
0-400.0Ω
Description
Type 321 Clamp Meter
Type 322 Clamp Meter
Stock No.
39C5515
39C1688
Price Each
102.95
111.95
57K9820
161.95
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
Calibrated Mfg part no 322 Clamp Meter
FLUKE-322 CALIBRATED
(72229)
Mfg. part no. FLUKE-360 AC leakage current clamp meter, designed for noninvasive checks of insulation condition,
allows user to perform tests without powering down the installation or disconnecting equipment — saving time, without
compromising on quality or safety. Unique jaw design eliminates the influence of adjacent current conductors, and
minimizes the effects of external magnetic fields, even at low currents — perfect for performing accurate and reliable
tests in todays crowded electrical environments. Uses one 3V Lithium button-cell battery. Meter comes complete with
soft carrying pouch and multi-language user’s manual. Overall dimensions: 6.9L x 2.8W x 1″H.
FLUKE-330 SERIES
CLAMP METERS
• Small Body and Jaws
• In-Rush Current Function (Except mfg. part no. FLUKE-333A)
for Measuring
Motor Starting Current
• True-RMS (Except mfg. part nos. FLUKE-333A and -334A)
• Large Backlit Display (Except mfg. part nos. FLUKE-333A)
• Microprocessor Technology for Low-Current Measurement
Accuracy
• Display Hold and Continuity Tester
• Frequency Measurement (mfg. part nos. FLUKE-337A): 5 400Hz
• Auto Shut-Off to Maximize Battery Life
• 3-Year Manufacturer’s Warranty
• Meets 600V CAT III Safety Standards (IEC 1010-1)
• Recommended accessories: H3 Holster, TL223 Test Lead Set,
AC285 Alligator Clips
• UL listed, CSA certified, CE compliant
Mfg. Part No.
FLUKE-360
FLUKE-337A
0-600.0V
0-600Ω
True-rms
Average Responding
No
Yes
Mfg. Part No.
FLUKE-333A
FLUKE-334A
FLUKE-335A
FLUKE-336A
FLUKE-337A
FLUKE-334A
0-600.0A
N/A
0-600.0V
0-600Ω
601-6000Ω
No
Yes
FLUKE-335A
0-600.0A
0-600.0V
0-600Ω
601-6000Ω
Yes
No
Description
Fluke-333A Clamp Meter
Fluke-334A Clamp Meter
Fluke-335A Clamp Meter
Fluke-336A Clamp Meter
Fluke-337A Clamp Meter
FLUKE-336A
0-600.0A
0-600.0A
0-600.0V
0-600Ω
601-6000Ω
Yes
No
FLUKE-337A
0-999.9A
0-999.9A
0-600.0V
0-600Ω
601-6000Ω
Yes
No
Stock No.
49M0849
50M7408
46M4415
31M3539
30M9512
Price Each
150.95
171.95
231.95
317.95
368.95
59M9152
54M4076
42M9978
281.95
367.95
418.95
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
FLUKE-335A CALIBRATED
FLUKE-336A CALIBRATED
FLUKE-337A CALIBRATED
Stock No.
30M2188
Price Each
642.95
FLUKE 770 SERIES MILLIAMP
PROCESS CLAMP METER
Certificate of calibration available on all models, go online or call Newark.
FLUKE-333A
0-400.0A
Description
AC Leakage Current Clamp Meter
(90373)
SPECIFICATIONS
Mfg. Part No.
AC Current Range
DC Current Range
AC/DC Volts
Resistance Range
• Measures current from from 1mA to 60A with
1mA of resolution
• Durable clamp withstands over 50,000
operations — wide 1.5″ jaw size
• Dual display — 3200-count digital, 32segments LCD bargraph
• “Display-Hold” button to capture readings in
hard-to-reach places
• Auto power-Off with warning buzzer
• Conforms to IEC1010 and EMC standards
• Meets safety standard VDE0404-4 and
VDE0702 requirements
Calibrated Fluke-335A Clamp Meter
Calibrated Fluke-336A Clamp Meter
Calibrated Fluke-337A Clamp Meter
771 Milliamp Process Clamp Meter:
• Measures 4-20mA output signals from
transmitters without breaking the loop
• Measures 10 to 50mA signals in older control
systems using the 99.9mA range
• Accuracy: 0.2%
• Resolution and sensitivity to 0.01mA
• Hold function captures and displays changing
measurements
• Dual backlit display with both mA measurement
and percent of 4 to 20mA span
772 and 773 Milliamp Process Clamp Meters:
• DC voltage measurement to verify 24 V power
supplies or voltage I/O signals
• Source dc voltage to test input devices that accept a
1 to 5 volt or 0 to 10 volt signal
• Scaled mA output provides a continuous mA signal that corresponds to a 4 to mA signal measured by the
mA clamp
Output signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the
loop
• mA in/out: simultaneously measure the mA signal
Apply a mA input signal to a device and measure its’ 4 to 20 mA output on devices such as valves or mA
isolators
• Voltage output linear ramp of 25% step output
Automatically change the voltage output for remote testing
Mfg. part no. FLUKE-771 compact process clamp meter measures mA signal for PLC and control systems analog I/O.
Detachable clamp with extension cable allows user to take measurements in tight locations, and the built-in spotlight
illuminates hard to see wires in dark enclosures. Features automatic power-off after 15 minutes and 2 minute
automatic-off for backlight and spotlight. Uses two AA 1.5V alkaline batteries. Meter includes soft carrying case, user’s
manual and manufacturer’s warranty: 3-years for electronics, 1-year for clamp cable assembly.
SPECIFICATIONS
Mfg. Part No. Function Resolution and Range
771, 772, 773 mA
0 to 20.99 mA
measurement 21.0mA to 100.0 mA
772 and 773 mA
0 to 24.00 mA
measurement
772 and 773 mA
0 to 24.00 mA
source
772 and 773 mA
0 to 24.00 mA
simulate
773
voltage
0 to 10.00 V dc
source
773
voltage
0 to 30.00 V dc
measure
(68964)
FLUKE 350 SERIES
TRUE-RMS 2000A
CLAMP METERS
• Reliably handle a wide range of high-current applications with 2000A
ac + dc true-rms, 1400A ac, and 2000A dc
• 2.3 in. jaw capacity is suitable for large, or multiple conductors
• In-rush current measurement captures ‘power-on′ surge current with
accuracy and repeatability high voltage measurement of 1000V ac +
dc true-rms, 600V ac, and 1000V dc allows users to perform multiple
tests with only one tool (355 only)
• Resistance to 400kΩ coupled with a continuity beeper, provide the
convenience of a multimeter (355 only)
• Accurately measure frequency up to 1kHz for optimum troubleshooting
• Quickly analyze readings using the MIN, MAX, and AVG functions
• Large backlit display allows for easy visibility in low-lit areas
• Use display hold feature to capture readings even when the display
cannot be viewed
• Use the low-pass filter to smooth out noisy loads and stabilize readings
• CAT IV 600 V, CAT III 1000 V rating for added user protection
Mfg. Part No.
FLUKE-771
FLUKE-772
FLUKE-773
Accuracy
Notes
0.2% + 2 counts measured by clamp
1% + 5 counts measured in series
by test jacks
0.2% + 2 counts Maximum mA drive:
24mA into 1,000 ohms
0.2% + 2 counts Maximum voltage 50 V dc
0.2% + 2 counts 2 mA maximum drive current
0.2% + 2 counts ...
Description
Milliamp Process Clamp Meter
Milliamp Process Clamp Meter
Milliamp Process Clamp Meter
Stock No.
30M9567
09R2350
09R2351
Price Each
499.00
695.00
995.00
(90370)
Fluke 350 series clamp meters address the need for accurate high current measurements up to 2000A. Meters come
complete with C43 soft carrying case, 6 AA batteries, and users manual. Mfg. part no. Fluke-355 also includes TL224
1.5 m silicone rubber test leads, TP2 test probes and AC285 alligator clips. Perfect for electrical contractors and
industrial service technicians.
Mfg. Part No.
FLUKE-353
FLUKE-355
Description
AC/DC True-rms Clamp Meter, 2000 A, Amps only
AC/DC True-rms Clamp Meter, 2000 A
Stock No.
64M1119
64M1120
Price Each
585.95
706.95
(103501)
(148830)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2209))
C-2209
M-2209
Y-2209
B-2209
USEXP1-2209
2209
9
ND3% BASE1
XXXX3810-2210-1-Page 2210 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:18 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
CLAMP METERS
FLUKE 902 TRUE RMS HVAC
CLAMP METER
DIGITAL AC/DC CLAMP-ON MULTIMETERS (CONT.)
Mfg. Part No.
DC AMPS
Resistance
• Designed for HVAC applications with capacitance,
DC Current (µA), and temperature measurements
• Small body and jaws fit perfectly in your hand and
into tight places
• Handy ’Display Hold’ button keeps measurements
on the display
• Meter controls are positioned so current
measurements can be done with one hand (index
finger on clamp opening lever and thumb on rotary
switch)
• Large, backlit display is easy-to-see in less than
ideal conditions
• Auto shut-off maximizes battery life so the meter
works when you need it
• Three year warranty
ACDC-400
400A
X
Mfg. Part No.
ACDC-400
Description
400A Clamp-On Digital Multimeter
Stock No.
02J0397
Single-to-Dual Input Temperature Adapter
Type-K Temperature Adapter
48F5520
48F5519
Price Each
179.95
ACCESSORIES
DKTA-620
TAC-DMM
29.95
17.95
(85524)
AC CLAMP-ON
MULTIMETERS
True-rms HVAC clamp meter includes two AA alkaline batteries, one pair TL75 test leads, one 80BK integrated DMM
temperature probe, soft carrying case and a users manual with safety information.
Mfg. Part No.
Description
Stock No.
Price Each
True-rms HVAC Clamp Meter
05M4770
229.99
FLUKE-902
(147930)
FLUKE-1630 EARTH GROUND
CLAMP METER
•
•
•
•
•
•
•
•
Easy, clamp-on, stakeless testing — no ground stakes required
Measures ground resistance from 0.025Ω to 1500Ω
Measures ground leakage current from 0.2mA to 1000mA
AC current measurement range from 0.2 A to 30A
Continuity loop test with audible alarm
User-defined “HI/LO” alarm limits for rapid measurement evaluation
“Display-Hold” button to capture readings in hard-to-reach places
Time-saving memory function automatically records and stores up to 99
measured values
• Automatic self-calibration
• Overload protection: 200A
Mfg. part no. FLUKE-1630 earth ground clamp meter provides ground loop and continuity
testing without breaking the circuit and enables non-intrusive leakage current measurement. Ideal for commercial, industrial, and utility applications, such as high-voltage
pylon installations, cell phone substations, RF transmitters and inspection of lightning
protection systems. Compact, rugged design features a large, 1.38″ jaw opening to
accommodate a variety of conductors. Meter comes complete with a hard carrying case with
shoulder strap, resistance test loop, 9V battery and multi-language user’s manual.
Mfg. Part No.
FLUKE-1630
Description
Earth Ground Clamp Meter
Stock No.
30M9565
Mfg. Part No.
True RMS
AC AMPS
AC/DC Voltage
Resistance
Capacitance
Frequency
Temperature
AC/DC micro-Amps
Non-contact voltmeter
PC Connection
Safety
Price Each
1429.95
(90372)
Mfg. Part No.
ACD-14 PLUS
ACD-14 TRMS-PLUS
ACD-15 PRO
ACD-15 TRMS PRO
ACD-16 PRO
ACD-16 TRMS PRO
i5s SERIES LOW-LEVEL
5A AC CURRENT CLAMP
• Ideal for use with Fluke 433 and
434 series 3-Phase Power Quality
Analyzers
• Measures 10mA to 5A AC
• Accuracy 10mA to 1A: 1% ±5mA
(48 to 65Hz)
• Accuracy 1A to 5A: 1% (48 to 65Hz)
• Bandwidth from 40Hz to 5kHz
• Output level: 400mV/A
i5sPQ3
• Buy the 3-Pack and Save
Specially configured to provide low-current accuracy while taking measurements on secondary current transformers.
Mfg. part no. i5s AC current clamp accommodates conductors up to 0.6″ (15mm). Compact shape makes transporting
and storing convenient; the clamp measures only 4. 6 x 1.7 x .9″ (116 x 43 x 23mm) . Takes accurate readings without
breaking the circuit. Output cable is 2.5 meters long with BNC connector termination. Rated CAT III 600V (insulated
conductors only). One-year manufacturers warranty.
Mfg. Part No.
I5S
I5SPQ3
Description
Low-Level 5A AC Current Clamp
5A AC Current Clamp
Stock No.
43K8757
43K8758
ACD-15 TRMS PRO
SPECIFICATIONS
Price Each
433.80
997.85
(85474)
9
DIGITAL AC/DC CLAMP-ON
MULTIMETERS
All are designed to conform to UL, ULc,
TÜV, CE, IEC standards, except mfg.
part no. ACDC-400 CATIII 600, CE.
Also included are test leads, carrying
case, battery, and instruction manual.
X
X
CAT III 600V
CAT III 600V
M-2210
X
CAT III 600V
X
CAT III 600V
Specifications: Range
• DC voltage: 400mV, 4V, 40V, 400V, 600V
• AC voltage: 4V, 40V, 40V, 600V
• DC current: 40A, 400A
• AC current: 40A, 400A
• Resistance: 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ
• Frequency: 10Hz - 100MHz
• Duty cycle: 0.1 - 99.9%
• *TRMS AC voltage frequency: 40Hz - 400Hz
72-7226
• *TRMS AC current frequency: 50Hz - 60Hz
Digital Clamp Multimeter with Frequency Measurement is perfect for general purpose applications. Comes complete
with zipper case, test leads, 9V battery and owners manual.
Description
Digital Clamp Multimeter
with Frequency and True
RMS AC Measurement
Digital Clamp Multimeter
with Frequency
(93047)
C-2210
X
X
Features:
• 3999 count autoranging display
• 1″ Clamp diameter
• Diode test
• Continuity buzzer
• Data hold
• Sleep mode
• Full icon display
• Low battery indicator
2210
STIBOINFO((NEWARK_MAIN_C124_2210))
X
X
Description
Stock No. Price Each
600A Clamp-On Multimeter with Dual Display
40P3919
99.95
139.95
600A Clamp-On Multimeter with Dual Display TRMS 40P3920
66K6275
149.95
Clamp-on, 2000A AC
66K6276
159.95
TRMS Clamp-on, 2000A AC
66K6277
149.95
Clamp-on, 1000A AC, PC connection
66K6278
169.95
TRMS Clamp-on, 1000A AC, PC connection
*Mfg. part no. 72-7226 only
ACDC-400
600 V
600 V
400A
1000A
600
X
ACD-16 TRMS
PRO
X
1000A
600
X
DIGITAL CLAMP MULTIMETER
WITH FREQUENCY
72-7224
Mfg. Part No.
AC Voltage
DC Voltage
AC AMPS
2000A
600
X
X
X
ACD-16 PRO
(85778)
Mfg. Part No.
72-7226
SPECIFICATIONS
ACD-15 PRO
ACD-16 TRMS PRO
ACD-15 TRMS
PRO
X
2000A
600
X
X
X
Y-2210
B-2210
USEXP1-2210
Stock No.
45M5526
45M5525
Price Each
84.95
63.95
ND3% BASE1
XXXX3811-2211-1-Page 2211 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:19 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
CLAMP METERS • ANALOG METERS
DIGITAL TRUE RMS CLAMP METER
260 SERIES ANALOG VOM
Features:
• 5999 count autoranging display
• Backlit display
• True RMS AC measurement
• AC surge current measurement
• 10MΩ input impedance
• Diode test
• Continuity buzzer
• Max hold
• Data hold
• Full icon display
• Sleep mode
• Low battery indicator
• Includes zipper case, test leads, owners manual
• Requires one 9V battery (292-035), included
The 260 series is for monitoring fluctuating trends and rates.
Large color-coded dial with mirrored scale to eliminate parallax error. More than 20 measuring ranges for DC voltage, AC
voltage, DC current, resistance, and dB level. Also measures
AC current up to 250A with Mfg. part no. 150-2 amp clamp
accessory, ordered separately; go online or call. Mfg. part
nos. 260-8P and 260-8PRT also feature additional relay
overload protection that is resettable and audible continuity
check. Mfg. part nos. 260-8RT and 260-8PRT include
roll-top case. All models include batteries, test leads with
alligator clips, and manual. Carrying cases and other accessories ordered separately; on this page .
260-8 and 260-8Xl
Specifications: Range
• Resistance: 660Ω, 6.6KΩ, 66KΩ, 660KΩ, 6.6MΩ,
• DC voltage: 6.6V, 66V, 600V (±0.8% +1)
66MΩ (±1% +2)
• AC voltage: 6.6V, 66V, 600V (±1.2% +5)
• Frequency: 660Hz ∼ 66MHz (±0.1% +3)
• DC current: 66A, 1000A (±1.5% +8)
• Duty Cycle 0.1-99.9%
• AC current: 66A, 1000A (±2% +8)
Perfect for applications where higher accuracy is critical. This compact clamp meter measures AC/DC voltage, AC/DC
current, resistance and frequency.
Mfg. Part No.
72-7228
Description
Digital Clamp Amp Meter, TRMS, AC/DC Voltage,
Current, Frequency
Stock No.
01N4892
Price 1-999
105.00
(116529)
BK PRECISION CLAMP METERS
Mfg. Part No.
Description
Stock No.
Price Each
Analog Voltmeter
62F300
219.43
12388 (260-8)
62F303
263.25
Analog Voltmeter
12389 (260-8RT)
62F1191
292.37
Analog Voltmeter
12391 (260-8P)
62F2270
335.44
Analog Voltmeter
12392 (260-8PRT)
Mfg. part nos. 260-8Xi, 260-8XPi offer the same features in a highly-visible yellow, durable ABS plastic housing
designed for the toughest environments. Mfg. part no. 260-6XLM has special low power ohms. Mfg. part no.
260-6XLMP also features overload protection.
Analog Voltmeter
50F3533
236.99
12395(260-8Xi)
50F3534
309.93
Analog Voltmeter
12396(260-8XPi)
98F3358
291.17
Analog Voltmeter
12206(260-6XLM)
01B6875
349.55
Analog Voltmeter
12211
(5320)
270-5 SERIES HIGH-ACCURACY VOM
BK Precision offers a wide variety of current clamps for safe non-invasive current
measurement. Measure up to 1000A with
these reliable, rugged instruments. All
clamps are much more than a current
clamp offering the ability to measure voltage resistance, capacitance and even frequency. Additionally, special features
allow for the recording of minimum and
maximum values, peak values, test diodes
and for continuity.
Extra-high accuracy VOM for applications requiring critical
measurements: 1.25% f.s. DC volt accuracy, 2% f.s. AC
volt accuracy. Large color-coded dial with mirrored scale
to eliminate parallax errors. Self-shielding meter movement. More than 20 measuring ranges for DC voltage, AC
voltage, DC current, resistance, and dB level. Also measures AC current with mfg. part no. 150-2 amp clamp
accessory, order separately; go online or call. Both models
include test leads with alligator clips, batteries, and
manual. Mfg. part no. 270-5RT comes with roll-top case.
Order other accessories separately; go online or call.
330B
Mfg. Part No.
Jaw Opening:
Autoranging:
Bargraph:
Display Counts:
True RMS:
AC (A):
DC (A):
AC (V):
DC (V):
Resistance:
Frequency:
Capacitance:
Continuity:
Data Hold:
Max Hold:
Peak Hold:
Range Hold:
Min/Max:
Relative Mode:
330B
2.24″
...
...
2000
...
1000 A
...
750 V
1000 V
2000 Mohm
...
...
X
X
X
...
...
...
...
313A
0.98″
X
...
...
...
600 A
600 A
600 V
600 V
1 kohm
...
...
X
X
...
...
...
...
...
Mfg. Part No.
330B
313A
350B
369B
Description
Clamp-On Meter
Mini Clamp-On Meter
Clamp-On Meter
Clamp-On Meter
Mfg. Part no.
12226 (270-5)
12227 (270-5RT)
301
350B
2.24″
...
X
3200
...
1000 A
...
750 V
1000 V
30 Mohm
32kHZ
...
X
X
...
X
X
...
...
369A
2.24″
...
X
4000
X
1000 A
1000 A
750 V
1000 V
40 Mohm
400kHz
4 nF-400 nF
X
X
...
X
X
X
X
Stock No.
92F385
68H8394
92F383
92F382
Price Each
1-2
110.88
159.00
183.68
224.00
Description
AC Line Separator
Stock No.
54M5379
Stock No.
62F380
16F2247
Price Each
249.29
292.37
(5321)
MODELS 228 AC/DC
AND 229-2 CURRENT
LEAKAGE TESTERS
228
229-2
Model 228 AC/DC is designed to mimic the human body’s sensitivity to electrical shock (Let-Go, reaction, and burn
hazard). Model 229-2 detects small leakage currents in appliances, motors, and other equipment. Model 228 complies
with UL, IEC, and ANSI guidelines. Model 229-2 checks both 120 and 240VAC equipment. Conforms to ANSIC101.11986 and UL safety standards. Both include test leads, battery, and manual. Carrying cases and other accessories
ordered separately, on this page .
Mfg. Part No.
40027
12267 (229-2)
Description
Model 228 Current Leakage Detector
Model 229-2 Current Leakage Detector
Stock No.
93F6825
62F324
Price Each
613.70
333.34
(13528)
TEST EQUIPMENT ACCESSORIES
Mfg. Part No.
00832
00834
00805 CASE
00248
AC LINE SEPARATOR
Used with AC current clampmeter to separate conductors on 110VAC devices with 2-conductor power cords. Separator
plugs into wall outlet and the device is plugged into the separator. Openings in separator then allow X1 or X10 current
measurements.
Mfg. Part No.
301
Description
High Accuracy Analog Voltmeter
Analog Voltmeter with Roll-Top Case
Price Each
1-2
21.00
00043
(85502)
00125
00545
Description
Nylon Case-Yellow*
Nylon Case-Black*
Leatherette Case*
Roll-Top Case
(260-8, 8P, 270-5)
Probe Leads w/Screw
Clips (260-8, 8P, 270-5)
Probe Leads w/Alligator
Clips (260-6XLM, 6XLMP,
8Xi, 8XPi, 228, 229-2)
150-2 AC Amp-Clamp
(260-8, 8P, 270-5)
Stock No.
50F3535
50F8971
62F302
62F204
Price Each
59.13
59.13
73.99
59.74
62F3012
18.76
01B6608
18.76
62F2377
117.96
*For use with mfg. part nos. 260-8, 8P, 8Xi, 8XPi, 6XLM, 6XLMP, 270-5, 228, 229-2
(5376)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2211))
C-2211
M-2211
Y-2211
B-2211
USEXP1-2211
2211
9
ND3% BASE1
XXXX3812-2212-1-Page 2212 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:19 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
ANALOG METERS • SIGNAL & FUNCTION GENERATORS
DELUXE ANALOG DISPLAY VOM
280 SERIES ARBITRARY WAVEFORM GENERATORS (CONT.)
Mfg. Part No.
284-U 115V
Y200H
Y200F
Features:
• Large three-color mirrored scale
• Carry handle doubles as a stand
• Continuity buzzer
Specifications: Range
• DC voltage: 600mV, 3V, 12V, 60V, 300V, 1000V
• AC Voltage: 600mV, 3V, 12V, 60V, 300V, 1000V
• DC Current: 120uA, 3mA, 30mA, 300mA, 10A
• Resistance: x1Ω, x100Ω, x1KΩ, x10KΩ
• Battery Test: 1.5V @ 300mA, 9V @ 30mA
• Continuity: Audible indication, less than 100Ω
• Input Impedance: 20KΩ/V (DC), 9KΩ/V (AC)
• Dimensions: 6.7″ x 4.9″ x 1.9″ (H x W x D)
Description
4-Channel Arbitrary Waveform Generator
19″ Rack Mounting Kit, Half-Rack for Type 281
19″ Rack Mounting Kit, Full-Rack for Types 282 and 284
Stock No. Price Each
43K0436
5860.00
43K0432
345.00
43K0431
345.00
(85278)
290 SERIES WAVEFORM
GENERATORS
Deluxe Analog Display VOM is perfect for educational purposes or in applications where unstable readings make digital
displays inconvenient. Comes complete with test leads, instruction manual, one 9V battery and two AA batteries.
Mfg. Part No.
72-8170
Description
Deluxe Analog Display VOM
Stock No.
20M0354
Price Each
31.95
(92286)
292-294
291
• 10ns pulse pattern generator
• Choice of 1, 2 and 4 independent or linked
• Waveform sequencing with up to 1024 segments
channels
• Unlimited waveform storage using CF® memory
• 100 MS/s 12-bit arbitrary waveform capability
• 1M point waveform memory
card
• 40 MHz function generator capabilities using DDS • Waveform Manager Plus software for Windows
(50MHz for square waves)
• USB interface in addition to RS-232 and GPIB
290 series uses Direct Digital Synthesis techniques and variable clock sampling technology to provide fully featured
programmable function and arbitrary waveform capability, combining many generators into one instrument. Signal
simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator,
trigger generator, tone generator, and amplitude modulation source. Maximum arbitrary waveform size is 1 M points. Up
to 500 user-defined waveforms may be stored on the removable memory card. Arbitrary waveforms can be defined by
front panel editing controls, by downloading of waveform data via RS-232,USB or GPIB, or by writing directly to the
removable memory card using the USB card reader/writer connected to a PC. Waveforms: Sine, square, triangle, DC,
positive ramp, negative ramp, sin(x)/x, pulse, pulse train, cosine, haversine and havercosine.
FLUKE-271 DIRECT DIGITAL SYNTHESIS (DDS)
FUNCTION GENERATOR WITH ARB
• Four row alphanumeric LCD
• Arbitrary capability with storage for five user defined
waveforms
• Multiple standard and complex waveforms recalled from
internal memory
• Extensive modulation capabilities include Sweep, AM, Gating,
Trigger/Burst, FSK and Hop
• Variable symmetry, variable duty cycle
• RS-232 and IEEE-488 interfaces
Mfg. part no. 271 is a high-performance function generator using Direct Digital Synthesis (DDS) techniques. Standard
waveforms include: sine, square, positive pulse, negative pulse, triangle, ramp up, ramp down. Additionally arbitrary
waveforms include multi-level squarewaves, waveform hopping and pseudo-random noise. Extensive modulation
capabilities make this a highly versatile signal source. Up to five arbitrary waveforms of 1024 10-bit words can be stored
in non-volatile memory. All waveforms can be swept over their full frequency range at a rate variable between 10
milliseconds and 15 minutes. All functions are accessible via the front panel. Size: 3U, 5.11’’ (130mm) high; half-rack
8.34’’ (212mm) wide, 12.99’’ (330mm) deep. Weight: 9 lbs. Power: 110 to 120VAC or 220 to 240VAC +/– 10 %,
50/60Hz AC by internal adjustment. Includes user manual, power cord. Order mfg. part no. Y200H 19″ rack mounting
kit separately below. Also available, mfg. part no. SW200ARB Window®-based Waveform Manager Plus software,
allows advanced waveform creation, editing and management; order separately, go online or call.
SPECIFICATIONS
0.0MHz to 10MHz
7 Digits or 0.1MHz
50Ω or 600Ω Switchable
5mV to 20V pk-pk Open Circuit (2.5mV to 10V into 50Ω/600Ω)
Output can be specified as V-H: 2
Frequency Range
Frequency Resolution
Output Impedance
Amplitude
Mfg. Part No.
271-U 115V
Y200H
Description
Direct Digital Synthesis (DDS) Function Generator with ARB
19″ Rack Mounting Kit, Half-Rack
Stock No. Price Each
43K0433
1595.00
43K0432
345.00
(85277)
280 SERIES ARBITRARY
WAVEFORM GENERATORS
Mfg. Part No.
291-U 115V
292-U 115V
294-U 115V
Description
1-Channel 100 MS/s Arbitrary Waveform Generator
2-Channel 100 MS/s Arbitrary Waveform Generator
4-Channel 100 MS/s Arbitrary Waveform Generator
Stock No.
61M3743
61M3744
61M3745
Price Each
3515.00
5325.00
7730.00
(102973)
CATV SIGNAL LEVEL METER
Features:
• Direct channel input of off–air channels 2-69 and
CATV channels 2-136
• Direct frequency input from 5-870MHz
• Simultaneously displays video carrier and audio carrier
strength
• Selectable dBmV and dBµV units
• Spectrum scan and channel scan modes
• Tilt measurement of seven user definable channels
• Carrier/noise ratio measurement
• Trunk voltage measurement
• Self recalibration
• Large 11⁄2″ x 21⁄4″ dot matrix LCD display
• Data logging
• RS-232C port with serial print function
Fully portable, compact signal level meter is essential when installing CATV or off–air antenna systems. Easily verify
proper signal level of any channel at each drop throughout a structure. FM demodulator and internal speaker provide
audio output of measured channel. Compact ergonomic unit is less than 9″ tall, and is easily held in one hand. Internal
NiMH battery with included wall charger. Battery life: 5-8 hours. Includes carry case, carry strap and manual
Mfg. Part No.
72-805
Description
CATV Analog Signal Level Meter
Stock No.
01N4889
Price Each
613.00
(114929)
FUNCTION AND SIGNAL GENERATORS
9
284
281
• Choice of 1, 2 and 4 independent or linked channels • Powerful modulation capabilities
• Uses Direct Digital Synthesis (DDS) techniques
• Built-in trigger generators
• 40MS/s max. sampling speed
• Multi-channel phase locking and summing
• 16MHz function generator
• Waveform Manager Plus for Windows® software
• 10MHz pulse generator
included
• Pulse train pattern generator
• Multiple standard waveforms recalled from
• 12-bit arbitrary generator
internal memory
• Link 16 (max.) arbitrary waveforms in a sequence
• RS-232 and IEEE-488 interfaces
280 series universal waveform generators combine many generators in one instrument. Their extensive signal
simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator,
trigger generator, tone generator, and amplitude modulation source. These waveform generators use Direct Digital
Synthesis (DDS) techniques and variable clock sampling technology to provide a fully featured programmable function
and arbitrary waveform capability. Standard waveforms include: sine, square, triangle, dc, positive ramp, negative
ramp, sine(x)/x, pulse, pulse train, cosine, haversine and havercosine. By using the Versatile Pulse generator capabilities
each channel can generate complex pulse trains. Fully programmable via RS-232 or IEEE-488 interfaces. All functions
are accessible via the front panel. Size: 3U, 5.11’’ (130mm) high; half-rack 8.34’’ (212mm) wide, 12.99’’ (330mm) deep.
Weight: 9 lbs. Power: 110 to 120VAC or 220 to 240VAC +/– 10%, 50/60Hz AC by internal adjustment. Includes power
cord, user manual, and WIndow®-based mfg. part no. SW200ARB Waveform Manager Plus software, that allows
advanced waveform creation, editing and management. Order mfg. part no. Y200H or Y200F 19″ rack mounting kit
separately below.
Mfg. Part No.
281-U 115V
282-U 115V
Description
1-Channel Arbitrary Waveform Generator
2-Channel Arbitrary Waveform Generator
Stock No.
43K0434
43K0435
3001
4011A
SPECIFICATIONS
Price Each
2125.00
3620.00
Mfg. Part No.
4011A
4017A
4017B
3001
4040A
4012A
Sine
X
X
X
X
X
X
Square
X
X
X
X
X
X
Triangle
X
X
X
2212
STIBOINFO((NEWARK_MAIN_C124_2212))
C-2212
M-2212
Y-2212
B-2212
USEXP1-2212
X
X
TTL CMOS
X
X
X
X
X
X
X
X
X
X
Pulse
X
X
X
Ramp
X
X
X
Burst
X
X
X
X
X
Stock No.
22C6860
22C6861
36M2369
90F2312
96B4096
97J8431
ND3% BASE1
XXXX3813-2213-1-Page 2213 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:19 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
SIGNAL & FUNCTION GENERATORS • SPECTRUM ANALYZERS
FUNCTION AND SIGNAL GENERATORS (CONT.)
FIELDFOX RF ANALYZER (CONT.)
FIELDFOX ACCESSORIES
NON-CALIBRATED
Mfg. Part No.
4011A
4017A
4017B
3001
4040A
4012A
Description
5MHz Function Generator
10MHz Sweep Function Generator
10MHz DDS Sweep Function Generator
Audio Generator
20MHz Sweep Function Generator
5MHz Sweep Function Generator
Stock No.
22C6860
22C6861
36M2369
90F2312
96B4096
97J8431
Price Each
1-2
371.85
465.09
582.75
94.08
728.00
375.00
Mfg. Part No.
Description
N9910X-843 Coaxial Adapter, Type-N(m) to 7/16 DIN(f)
N9910X-845 Adapter Kit:Type-N(f) to 7/16 DIN(f), Type-N(f) to 7/16 DIN(m), TypeN(f) to Type-N(f)
N9910X-860 Fixed Attenuator, 40dB, 100W, 3GHzDC, Type-N(m) to Type-N(f)
N9910X-861 Fixed Attenuator, 40dB, 50W, 8.5GHzDC, Type-N(m) to Type-N(f)
N9910X-870 Replacement Battery
N9910X-872 External Battery Charger
N9910X-873 AC/DC Adapter
N9910X-874 External Bias-Tee, 2.5MHz to 6GHz, 1W, 0.5A
N9910X-881 Hard Transit Case
(5299)
FIELDFOX RF ANALYZER
Stock
No.
46P5200
46P5201
Price
Each
80.23
156.00
46P5202
46P5203
46P5204
46P5205
46P5206
46P5207
46P5208
601.00
487.00
100.00
276.00
151.00
201.00
401.00
(141917)
Features:
• Bright 6.5” color anti-glare LCD display with LED backlight
• Task-driven keys are grouped to easily perform standard
field measurements
• Portrait design and large buttons for easy operation, even
with gloves on
• Dedicated marker keys for quick marker function access
• Backlit keypad
• Easily accessible battery compartment
• LAN port for fast data transfer
• SD flash card slot for additional data storage
• USB ports for convenient data transfer
• Connector covers help keep dust out
• Convenient side strap makes it easy to hold and carry
• Meets MIL-PRF-28800F Class 2 specification
• Dimensions: 11.5”H x 7.4”W x 2.8”D (292 x 188 x 72mm)
• Lightweight: 6.2 lbs/2.8kg including battery
Measurements:
• Cable and antenna analyzer for return loss, one-port cable loss,
distance to fault, line sweeping, and VSWR measurements
• Vector network analysis display (S11, S21, phase, and Smith chart)
• Built-in spectrum analyzer
• Optional preamplifier; order separately below
HAND-HELD 3GHZ RF
SPECTRUM ANALYZER
Features:
• 6.5″ transflective LCD with 640 x 480 resolution
• Multi-language user interface: 11 languages
• Modern USB connectivity for PC control and data transfer
• Low SSB phase noise helps detect low signals close to carrier
• Narrow RBW helps to resolve close-in signals
• Measurement applications for HD radio and DSL interference
testing
• Four hours of battery life
Mfg. part no. N9340B provides good usability and exceptional performance for installation and maintenance, spectrum
monitoring, and on site tasks. Supports one-button measurement in occupied bandwidth, channel power and adjacent
channel power ratio, virtually eliminating set up time in the field. Comes with multi-language quick start tutorial,
CD-ROM of manual, and a soft carrying case. 3 GHz pre-amplifier, 3 GHz tracking generator and a hard-side transit case
are available; go online or call.
SPECIFICATIONS
Calibration:
• Integrated QuickCal allows user to calibrate FieldFox without a calibration kit, providing worry-free accuracy
and repeatability
• Immediate calibration with FieldFox’s CalReady makes unit calibration ready at the test port immediately
following power-up
• Broadband calibration with automatic interpolation eliminate re-calibration when test frequency or number of
points changes
• Mechanical open, short, load calibration support
Spectrum Analyzer:
Cable and Antenna Analyzer:
• Frequency range: 100kHz to 4GHz or 6GHz
• Frequency range: 2MHz to 4GHz or 6GHz
• DANL (Displayed Average Noise Level): -148dBm
• Directivity: > 42dB
• Phase noise: -88dBc at 10kHz
• Measurement speed: 1.5ms / per point
• TOI (Third Order Inter-modulation distortion): +18dBm
Network Analyzer:
• Sweep speed: 1 second / full span (6GHz)
• Vector measurements, S11 phase and S11
Power Meter:
magnitude
• 9kHz to 24GHz
• Scalar measurement, S21 magnitude
• U2000 Series USB power sensor dependent
• Display: log, linear, phase, VSWR, Smith chart
N9912A series 4GHz or 6GHz FieldFox RF analyzer is an integrated hand-held instrument for wireless network
installation and maintenance. Combines 4GHz or 6GHz cable/antenna analysis, spectrum analysis, power meter
measurements and vector network analysis into one rugged, compact, lightweight and weather-resistant package.
Comes complete with AC/DC adapter, lithium ion battery, soft carrying case, user manual, CD-ROM with FieldFox Data
Link software and one-year manufacturer’s warranty. Order license key software upgrade options and accessories
separately below.
Mfg. Part No.
Description
N9912A-104 FieldFox RF Analyzer with 4GHz Cable and Antenna Analyzer
N9912A-106 FieldFox RF Analyzer with 6GHz Cable and Antenna Analyzer
Mfg. Part No.
N9340B
100 kHz to 3 MHz
1% of Reference Level
30 Hz to 1 MHz in 1-3-10 Sequence
-126 dBm at 50 MHz
10 ms to 1000 s
±3 dB at 50 MHz
+10 dBm
Description
Hand-Held 3 GHz RF Spectrum Analyzer
Stock No.
94M4922
Price Each
7987.00
(94377)
HAND-HELD SPECTRUM
ANALYZERS, 3.3 GHz
AND 8.5 GHz
•
•
•
•
•
Frequency range 50kHz to 3.3GHz or 8.5GHz
Portable, weighs 1.8 kg including the battery
4 hour battery life; easy-to-replace rechargeable lithium-ion battery
USB interface for PC connectivity
PC software for remote control and documentation of measurement
results
Conveniently save measurement data to USB flash drive
Large easy-to-read color display
External trigger for zero span measurements
SCPI-like remote control commands
Stock
No.
46P5209
46P5210
Price
Each
7614.00
8617.00
46P5211
1363.00
46P5212
46P5213
952.00
3706.00
46P5214
6713.00
46P5215
751.00
46P5216
46P5217
500.00
8114.00
46P5218
1550.00
(147959)
46P5190
46P5191
46P5192
46P5193
46P5194
46P5195
46P5196
46P5197
46P5198
46P5199
651.00
892.00
892.00
892.00
550.00
550.00
782.00
782.00
500.00
50.02
(148833)
FIELDFOX OPTIONS
OPTION 110 Transmission Measurement Software Upgrade Key for Insertion
Loss or Gain Measurement
OPTION 111 QuickCal Calibration Software Upgrade Key
OPTION 230 4GHz Spectrum Analyzer Capability Software Upgrade Key — For
N9912A-104 Only
OPTION 231 6GHz Spectrum Analyzer Capability Software Upgrade Key — For
N9912A-106 Only
OPTION 235 Preamplifier Software Upgrade Key for Spectrum Analysis
Capability (Requires Option 230 or 231; order separately above)
OPTION 302 External USB Power Sensor Support Software Upgrade Key
OPTION 303 Network Analysis Capability Software Upgrade Key for 1 Port
(Requires Option 110 for 2nd Port; order separately above)
OPTION 308 Vector Voltmeter Software Upgrade Key
Frequency Range
Setting Resolution
Resolution Bandwidth
Displayed Average Noise Level (DANL)
Sweep Time
Flatness
3rd Order Intercept
•
•
•
•
Full-featured spectrum analyzers are compact, light weight for quick and precise signal investigations. Built-in tracking
generator to rapidly determine transmission characteristics of 2 port devices (model 2652A). Measurement functions:
channel and adjacent channel power, occupied bandwidth, electric and magnetic field strength. Smart one button “Auto
Tune″ function automatically scans the full frequency range, detects and centers the maximum signal, and configures
optimum values for RBW, VBW, sweep time and reference level. All models include AC adapter, PC software and USB
cable, lithium-ion battery, soft carrying case, accessory pouch and users manual.
Mfg. Part No.
Description
Handheld 3.3 GHz Spectrum Analyzer
2650A
Handheld 3.3 GHz Spectrum Analyzer with Tracking Generator
2652A
Handheld 8.5 GHz Spectrum Analyzer
2658A
Stock No. Price Each
09R1812
6450.00
09R1813
8450.00
09R1814
10995.00
ACCESSORIES
CC265
CC560
Deluxe Spectrum Analyzer Accessory Kit for 2650/2650A Series 54M4448
75M0242
Deluxe Spectrum Analyzer Accessory Kit
155.00
650.00
FIELDFOX ACCESSORIES
N9910X-800
N9910X-801
N9910X-802
N9910X-803
N9910X-810
N9910X-811
N9910X-812
N9910X-813
N9910X-820
N9910X-821
T-Calibration Kit, DC-6GHz, Type-N(m)
T-Calibration Kit, DC-6GHz, Type-N(f)
T-Calibration Kit, DC-6GHz, 7/16 DIN(m)
T-Calibration Kit, DC-6GHz, 7/16 DIN(f)
Rugged Phase Stable Cable, Type-N(m) to Type-N(m), 5-ft.
Rugged Phase Stable Cable, Type-N(m) to Type-N(f), 5-ft.
Rugged Phase Stable Cable, Type-N(m) to Type-N(m), 12-ft.
Rugged Phase Stable Cable, Type-N(m) to Type-N(f), 12-ft.
Antenna, Directional, Multiband, 800-2500MHz, 10dBi
Antenna, Telescopic Whip, 70MHz - 1GHz
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2213))
C-2213
M-2213
Y-2213
B-2213
USEXP1-2213
2213
9
ND3% BASE1
XXXX3814-2214-1-Page 2214 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:19 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
SPECTRUM ANALYZERS • DATA ACQUISITION • PROCESS METERS & CALIBRATORS
SPECTRUM ANALYZER
HAND-HELD LOOP CALIBRATORS
• Frequency Range: 0.15MHz to 1050MHz
• 41⁄2 -Digit Display (Center and Marker Frequency: 0.1MHz
Resolution)
• –100 to +13dBm Amplitude Range
• Dynamic Range: 80dB
• Level Accuracy: ±2dB
• 100kHz/div to 100MHz/div Spanwidth
• Frequency Accuracy: ±100kHz
• 4 x 10dB Attenuators
• Input Impedance: 50Ω
• TG Level: –50dBm to +1dBm
• AM/FM Demodulation
• TG Attenuation: 0 to 40dB (4 x 10dB)
• 6″ CRT
• TG Output Impedance: 50Ω
• Built-in Tracking Generator
• Comes Complete with Instruction Manual and Power Cord
Mfg. Part No.
2630
Description
Spectrum Analyzer
Stock No.
52F6288
Price Each
1-2
2458.40
(6515)
MEASURINGPAD ALL-IN-ONE DATA
ACQUSITION SYSTEM
• Multipurpose data acquisition solution for maintenance,
troubleshooting, quality control, variable speed drive, and
energy measurement applications
• Combines the latest high-speed data acquisition technology
with a user-friendly front end
• Rapidly collects, monitors, and displays multiple sensor
inputs
• Ideal for troubleshooting, process tuning, fault recording,
control-loop monitoring, R&D, and trend analysis
• Color icon-based touch screen and super-simple setups
FLUKE-707
FLUKE-705
Mfg. Part No.
VDC
mA DC
24V Loop Supply
Provides live readout of up to 16 differential analog channels sampling at 10 kHz/input and 8 digital TTL-level sampling
at 40 kHz/channel. Interchangeable input pods provide instrument versatility as user can quickly change measurement
scheme by varying pods (thermocouples, current sources, and voltage sources). Digital inputs may be used to trigger
datalogging, perform counting and timing operations, and monitor frequency and quadrature. Additional cross-channel
math calculations can be used to display and monitor process variable such as efficiency, horsepower, and signal
min/max/avg values.
MeasuringPAD monitors data continuously, records automatically and “by exception” using limit-sensitive and logic
on/off triggers (by event). Data is stored internally on removable memory card and may be easily exported without any
special software or equipment. Records pre- and post-trigger data up to 10,000 times/second.
Data may be displayed in a variety of formats, including bargraphs, trend charts, oscilloscope mode, and Discrete
Fourier Transforms for harmonic analysis. Touch screen pages are intuitive and speed setup. Multiple setups can be
stored for instant reloading.
Mfg. Part No.
Description
MeasuringPAD: Color touch LCD display, AC Power adapter/
MP
battery charger, carry strap, one MP-32M 32 Megabyte Compact
Flash Memory Card, user guide
MP600V High Voltage POD
MP300V Medium Voltage POD
Low Voltage POD
MP30V
MP20MA Low Current POD
Thermocouple POD
MPUT
MP-32M 32M memory
MP-64M 64M memory
MP-128M 128M memory
MP-SSC Soft Sided Carry Bag
MP-RSC Re-usable shipping container
FLASH Reader USB
FR-USB
MP-HVC High Voltage Cable Set
Low Voltage Cable Set
MP-LVC
175.00
175.00
175.00
175.00
200.00
105.00
160.00
265.00
145.00
305.00
135.00
325.00
236.00
787
FLUKE-789
789
787
0 to 20
X
0 to 20
1000
1000
40MΩ
1000
1000
20kHz
X
X
Cat. IV
1000
1000
40MΩ
1000
1000
20kHz
X
X
Cat. III
715
0 to 20
0 to 24
X
707, 707EX
705
0 to 20
X
0 to 20
X
10
28
28
24
24
24
MEASUREMENTS
VDC
VAC True-rms
Ohms
mA DC
mA AC
Frequency
Min./Max.
Hold
IEC 61010 Category
Stock No. Price Each
59K9488
4850.00
59K9502
59K9501
59K9500
59K9499
59K9498
59K9496
59K9497
59K9495
59K9494
59K9493
59K9487
59K9491
59K9492
FLUKE-715
These powerful loop calibrators are ideal for loop calibration, maintenance and repair applications. Mfg. part no. 707
features a one-handed user interface with ″Quick-Click″ detented knob making it extremely fast and easy to use. Its
intrinsically-safe version, mfg. part no. 707EX, is for use in explosion endangered areas and is certified in accordance
with the ATEX directive (Ex II 2 G Eex ia IIC T4) in Zones 1 and 2, ZELM 02 ATEX 0120 X. All models come complete with
alligator test clips, safety-designed test lead set, protective holster with Flex-Stand™, one 9V battery (mfg. part no. 789
has four AA batteries), instructions and a three-year manufacturer’s warranty (mfg. part no.707EX has a one-year
manufacturer’s warranty and includes Instruction manual on CD-ROM). Mfg. part nos. 787 and 789 ProcessMeter™
also include Quick-Reference guide and users manual. Recommended accessories: Mfg. part no. C50 Case, Mfg. part
no. TL71 Test Leads, Mfg. part no. TPAK Meter Hanger (for 705 and 707), Mfg. part no. C25 Case, Mfg. part no. T71
Test Leads, Mfg. part no. AC72 Alligator Clips (for 715) Mfg. part no. C116 Case, Mfg. part no. TLK225 Accessory Set,
Mfg. part no. Mfg. part no. Meter Hanger (for 787 and 789).
COMPARISON AT A GLANCE:
SOURCES
Mfg. Part No.
FLUKE-705
FLUKE-707
FLUKE-707EX
FLUKE 715
FLUKE 787
FLUKE-789
Description
Stock No. Price Each
Loop Calibrator
48F2058
599.00
39C2941
649.00
Loop Calibrator with ″Quick Click″ Control Knob
949.00
Intrinsically-Safe Loop Calibrator with ″Quick Click″ 63H2496
Control Knob
83F4183
895.00
Voltage/mA Calibrator
91F6067
699.00
ProcessMeter
81C7984
795.00
ProcessMeter
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
FLUKE 715 CALIBRATED Voltage/mA Calibrator
FLUKE 787 CALIBRATED Calibrated ProcessMeter
60K7384
60K7405
985.00
818.00
(34070)
FLUKE-718 AND FLUKE-717
SERIES PRESSURE CALIBRATORS
(85556)
VOLTAGE AND CURRENT USB DATA LOGGERS
9
•
•
•
•
•
•
•
•
FLUKE-718 AND -717 SERIES MODELS
• DC current measurement: 0 to 24mA
• Loop supply: 24VDC
• Min./Max. and Hold Functions
• Clear, 5-digit display
• EMI tolerant, dust- and splash-resistant
• CSA certified, CE compliant
• Recommended accessories - TL220 Test
Lead Set, 700PTP Pneumatic Test Pump
FLUKE-718 SERIES MODELS ONLY
• Built-in hand pump — sources -11psig to
full scale
0-30VDC (EL-USB-3) or 4-20mA (EL-USB-4) measurement range
USB interface for setup and download
More than 32,000 reading capacity
Programmable sample rates from 1 sec. to 12 hrs.
Two progammable alarm threshholds with LED indication
Replaceable internal battery (included)
Connection via screw terminals in cap
Includes free Windows® data logging configuration and graphing software
The EL-USB-3 accepts voltage inputs from 0-30VDC, permitting the recording of measurements from a wide range of sensors. EL-USB-4 enables quick
and easy monitoring of manufacturing processes with a 4-20mA range.
Connection to the circuit is via screw terminals housed in the cap.
Mfg. Part No.
EL-USB-3
EL-USB-4
Description
0-30VDC USB Datalogger
4-20mA USB Datalogger
FLUKE-718 Series
Stock No.
80K5461
80K5462
Price Each
1-24
25-249
92.56
81.27
92.56
81.27
(88047)
Mfg. Part No.
FLUKE-718-1G
FLUKE-718 30US
FLUKE-718 100US
FLUKE-718-300G
FLUKE-718EX 300
Description
1psi Pressure Calibrator
30psi Pressure Calibrator
100psi Pressure Calibrator
300psi Pressure Calibrator
Intrinsically-Safe 300psi Pressure Calibrator
2214
STIBOINFO((NEWARK_MAIN_C124_2214))
C-2214
M-2214
FLUKE-717 Series
FLUKE-718 and FLUKE-717 series pressure calibrators include: protective yellow holster, test leads, alligator clips,
single 9V alkaline battery (two with FLUKE-718 series models), instructions and three-year manufacturer’s warranty.
NOTE: Pressure may also be measured using 1 of 29 mfg. part no. 700Pxx pressure modules ordered separately; go
online or call.
FLUKE-718 SERIES
Y-2214
B-2214
USEXP1-2214
Stock No.
83K0435
48F2059
48F2060
83K0436
14N6781
Price Each
1995.00
1995.00
1995.00
1995.00
2795.00
ND3% BASE1
XXXX3815-2215-1-Page 2215 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:20 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
PROCESS METERS & CALIBRATORS
FLUKE-718 AND FLUKE-717 SERIES PRESSURE CALIBRATORS (CONT.)
RTD AND THERMOCOUPLE CALIBRATORS (CONT.)
FLUKE-717 SERIES
Mfg. Part No.
FLUKE-717-1G
FLUKE-717 30G
FLUKE-717 100G
FLUKE-717-300G
FLUKE-717-500G
FLUKE-717-1000G
FLUKE-717-1500G
FLUKE-717-3000G
FLUKE-717-5000G
Description
1psi Pressure Calibrator
30psi Pressure Calibrator
100psi Pressure Calibrator
300psi Pressure Calibrator
500psi Pressure Calibrator
1000psi Pressure Calibrator
1500psi Pressure Calibrator
3000psi Pressure Calibrator
5000psi Pressure Calibrator
Stock No.
83K0428
83F9129
55C4468
83K0431
83K0433
83K0429
83K0430
83K0432
83K0434
Price Each
995.00
1095.00
1095.00
995.00
995.00
1095.00
1095.00
1095.00
1095.00
(34075)
Meaure/Simulate
Thermocouple
Types
mV
mA DC
FLUKE-712
...
...
...
Mfg. Part No.
FLUKE 712
FLUKE 714
FLUKE-724
Description
RTD Process Calibrator
Thermocouple Calibrator
Temperature Calibrator
Features:
• Electric pump for one handed pressure calibration
• Best in class pressure measurement uncertainty of 0.025%
• Measure and source mA with best in class 0.015% accuracy
• Precision pressure adjust vernier
• Variable release rate bleed valve for easy pressure adjustment
• Ideal performance for high accuracy transmitter calibration
• Programmable pump limit allows:
Protection from damage due to over-pressurization
The user to program target pressures for pumping
• Extended measurement range with any of twenty nine (29) 700Pxx Pressure
Modules
• Source mA with simultaneous pressure measurement to test valves and I/Ps
• Simulate mA signals to troubleshoot 4-20 mA loops
• Test pressure switches with built in switch test function
• Power transmitters during test using 24 V loop supply with simultaneous mA
measurement
• Proven cleanout ports reduce pump failures
24 V dc
Loop Supply
Mfg. Part No.
FLUKE-719 30G
FLUKE-719 100G
Temperature Calibrator
60K7394
1725.00
(65175)
Accuracy
Notes
0.025 % Range
6 month spec.,
0.035% of
Range
for 1 year
0.001 psi, 0.1
mbar
0.001 mA
0.015% Rdg + 2
counts
N/A
10%
Description
Electric Pressure Calibrator, 30 PSI
Electric Pressure Calibrator, 100 PSI
Price Each
895.00
895.00
1595.00
Mfg. Part No.
Description
Stock No.
Price Each
10-Piece Thermocouple Plug Kit
83F4188
79.00
FLUKE 700TC1
Mfg. part no. FLUKE-700TC2 kit contains seven thermocouple mini-plugs supporting the most popular thermocouple
types supported by mfg. part nos. FLUKE-714 and FLUKE-724 calibrators. The kit includes: two Type J (black), two
Type K (yellow), one Type T (blue), one Type E (purple), and one Type R/S (green).
7-Piece Thermocouple Plug Kit
83F4189
69.00
FLUKE 700TC2
FLUKE 719
With built-in electric pump, the Fluke 719 provides pressure calibrator makes it possible to calibrate and test pressure
devices quickly and easily with one hand saving valuable time. Use the programmable pump limit settings to avoid
over-pressurization, and to set ’pump to’ pressure values. The unique cleanout port design reduces pump failures, and
makes the 719 easy to clean without repair. The compact, lightweight form, combine with one-handed use, makes this
pressure calibrator the ideal tool for process professionals.
0.01 psi, mbar
Stock No.
83F4179
83F4182
10C2607
THERMOCOUPLE PLUG KITS
Mfg. part no. FLUKE-700TC kit contains 10 thermocouple mini-plugs supporting each of the thermocouple types
supported by the mfg. part nos. FLUKE-714 and FLUKE-724 calibrators. The kit includes one each of the following:
Type J (black), Type K (yellow), Type T (blue), Type E (purple), Type R/S (green), Type B or Cu (white), Type L (J-DIN)
(blue), Type U (T-DIN) (brown), Type C (red), and Type N (orange). Recommended accessories: Mfg. part no. C25 Case,
Mfg. part no. TL71 Test Leads, Mfg. part no. TPAK Meter Hanger (for 724), Mfg. part no. C25 Case, Mfg. part no. T71
Test Leads, Mfg. part no. AC72 Alligator Clips (for 714), Mfg. part no. TL220 Test Leads, Mfg. part no. TPAK Meter
Hanger (for 724).
FLUKE 719 ELECTRIC
PRESSURE CALIBRATORS
Resolution
FLUKE-724
J, K, T, E, R, S,
B, L, U, N, XK, BP
-10 to 75
24
Measure Only
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
FLUKE-724 CALIBRATED
Function Measure or Source
Range
-12 to 36 psi,
Pressure
-850 mbar to 2.4
719-30G
bar
Pressure
-12 to 120 psi,
719-100G
-850 mbar to 8
bar
mA
0 to 24 mA
Mfg. Part No.
FLUKE-714
J, K, T, E, R,
S, B, L, U
-10 to 75
...
Stock No.
08P4409
08P4408
Max load,
1000 Ω
750 Ω in
HART mode
...
Price Each
2795.00
2795.00
(134285)
RTD AND THERMOCOUPLE
CALIBRATORS
FLUKE-725 AND FLUKE-726
MULTIFUNCTION PROCESS
CALIBRATORS
All Models:
• Streamlined, hand-held design
• Reliably-built to stand up to tough field use
• Two-channel, measure/source screen, for viewing input and output simultaneously
• Easy-to-read display with backlight for poorly lit areas
• Measures volts, mA, RTDs, thermocouples, frequency, resistance to test sensors
and transmitters
• Source/simulate volts, mA, RTDs, thermocouples, frequency, resistance, pressure
to calibrate transmitters
• Supports flow meter testing with frequency function
• Auto-Step and Auto-Ramp for fast linearity testing
• Power transmitters during test using 24V loop power supply with simultaneous mA
measurement
• Stores frequently-used test setups for later use
• Three-year manufacturer’s warranty
• CSA certified, CE compliant
• Recommended accessories - C280 Case, TL220 Test Leads, TPAK Meter Hanger
(for 725) C115 Case, TL220 Test Leads, TPAK Meter Hanger (for 726)
FLUKE-726 Only:
• Precise measuring and calibrating — accuracies of 0.01%
• Transmitter error % calculation — no calculator needed
• Memory storage for later analysis
• Enhanced flow meter testing with frequency pulse train source mode
• HART mode inserts 250Ω resistor in mA measure
• Integrated pressure switch test
• Custom RTD curves for enhanced temperature measurement
• Voltage input protection for improved reliability
COMPARISON AT A GLANCE:
Mfg. Part No.
Documenting
FLUKE-725, -725EX
...
mA Accuracy
RTD Accuracy
RTD Coefficient
Pressure+
Switch Test
TC/RTD Ranges
Error Calculation
•
•
•
•
Compact and lightweight
Simple controls
Clear, easy-to-read display
Three-year manufacturer’s
warranty
• CSA certified
0.025%
0.33C
...
29 Rgs., 0.05%
...
12/7
...
FLUKE-725
FLUKE-726
FLUKE-726
Memory Storage for
up to 8 Calibrations
0.015%
0.15C
X
29 Rgs., 0.05%
X
12/8
X
+Measure or source* pressure (*pressure pump required) using any of the FLUKE-700P series pressure
modules; order separately, go online or call Newark.
FLUKE-712
FLUKE-714
FLUKE-724
Mfg. part nos. FLUKE-712 and FLUKE-714 calibrators include protective yellow holster with test lead storage, test
leads and alligator clips (except mfg. part no. FLUKE-714), instruction sheet, single 9V alkaline battery and
NIST-traceable calibration report and data. Mfg. part no. FLUKE-724 calibrator includes test clips, test leads, one pair of
stackable test leads and users manuals on CD-ROM.
COMPARISON AT A GLANCE:
Meaure/Simulate
RTD
RTD
Types
Resistance
Thermocouple
FLUKE-712
-200° to 800°C
Pt 100, 200, 500, 1000 (385);
Pt 100 (392); Pt 100 (392) JIS;
Ni120 (672)
15 to 3200Ω
...
Mfg. Part No.
FLUKE-714
...
...
...
-200° to 1800°C
FLUKE-724
-200° to 800°C
Pt 100, 200, 500, 1000 (385);
Pt 100 (393); Pt 100 JIS; Ni120
Mfg. part no. FLUKE-725 multifunction process calibrator is a powerful, yet easy-to-use field calibrator for the
maintenance and troubleshooting of process control instrumentations. Mfg. part no. FLUKE-725EX, its intrinsicallysafe version, is able to calibrate almost any process instrument likely to need service in an area where explosive gasses
may be present and is in compliance with safety specfications ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X; I.S.
Class I, Division 1 Groups B-D, 171°C. Mfg. part no. FLUKE-726 precision multifunction process calibrator is designed
specifically for broader workload coverage, calibration power and unsurpassed accuracy. It interprets results without
the help of a calculator and stores measurement data for later analysis. All models operate on 4 AA batteries and come
complete with one-set each of mfg. part no. TL75 test leads, mfg. part no. AC72 alligator clips, and stackable test
leads, plus a product manual and a users guide on CD.
15 to 3200Ω
-200° to 1800°C
Mfg. Part No.
Description
FLUKE-725 US Multifunction Process Calibrator
FLUKE-725EX Intrinsically-Safe Multifunction Process Calibrator
Precision Multifunction Process Calibrator
FLUKE-726
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2215))
C-2215
M-2215
Y-2215
B-2215
USEXP1-2215
Stock No.
48F6885
19K1381
64K0072
Price
Each
2095.00
2895.00
2795.00
2215
9
ND3% BASE1
XXXX3816-2216-1-Page 2216 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:20 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
PROCESS METERS & CALIBRATORS
FLUKE-700P SERIES
PRESSURE MODULES
FLUKE-725 AND FLUKE-726 MULTIFUNCTION PROCESS
CALIBRATORS (CONT.)
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
Mfg. Part No.
Description
FLUKE-725 US CALIBRATED Multifunction Process Calibrator
Price
Each
2230.00
Stock No.
60K7385
(85726)
FLUKE-740 SERIES
DOCUMENTING PROCESS
CALIBRATORS
FLUKE-700P22
Range/Resolution
Mfg. Part No.
Description
1 year
FLUKE 700P00 Differential 1in. H2O/0.001
FLUKE-700P01 Differential 10.000 in. H2O/2.491OkPa
FLUKE-700P02 Differential 1.0000 psi/6.8948kPa
FLUKE-700P22 Differential 1.0000 psi, Wet/6.8948kPa
FLUKE-700P03 Differential 5.0000 psi/34.474kPa
FLUKE-700P23 Differential 5.0000 psi, Wet/34.474kPa
FLUKE-700P04 Differential 15.000 psi/103.42kPa
FLUKE-700P24 Differential 15.000 psi/103.42kPa
Gage
30.000 psi/206.84kPa
FLUKE-700P05
Gage
100.00 psi/689.48kPa
FLUKE-700P06
Gage
300.00 psi/0.001
FLUKE 700P27
Gage
500.00 psi/3447.4kPa
FLUKE-700P07
Gage
1000.0 psi/6894.8kPa
FLUKE-700P08
Gage
1500.0 psi/10342kPa
FLUKE-700P09
Gage
3000.00 psi/20.684 MP.
FLUKE-700P29
Gage
5000.0 psi/34.474 mp
FLUKE-700P30
Gage
10000 psi/68.948 mp
FLUKE-700P31
Absolute
5.0000 psi/34.474kPa
FLUKE-700PA3
Gage
15.000 psi/103.42kPa
FLUKE-700PA4
Absolute
30.000 psi/206.84kPa
FLUKE-700PA5
Absolute
100.00 psi/689.48kPa
FLUKE-700PA6
Vacuum
-5.0000 psi/-34.474kPa
FLUKE-700PV3
Vacuum
-15.000 psi/-103.42kPa
FLUKE-700PV4
Dual
±1.0000 psi/±6.8948kPa
FLUKE-700PD2
Dual
±5.0000 psi/±34.474kPa
FLUKE-700PD3
Dual
±15.000 psi/±103.42kPa
FLUKE-700PD4
Dual
-15/30.000 psi/
FLUKE-700PD5
-100/208.84kPa
Dual
-15/100.00 psi/
FLUKE-700PD6
-100/689.48kPa
Dual
-15/200.00 psi/
FLUKE-700PD7
-100/1379.0kPa
Mfg. part no. FLUKE-744 offers all of the
capabilities of the mfg. part no.
FLUKE-743B 120, plus the ability to maintain and calibrate selected HART transmitters without a second tool.
FLUKE-744
FLUKE-740 series documenting process calibrators help with troubleshooting problems or running routine maintenance. They do many different tasks quickly and well to help get the job done fast. Recommended accessories - C789
Case, 700PTP Pneumatic Test Pump, 700PXX Pressure Modules.
Mfg. part no. FLUKE-741B 120 offers simultaneous source and measure capabilities for all common process
parameters. Create and execute automated procedures and automatically capture the results. Mfg. part no.
FLUKE-743B 120 offers all the capability of mfg. part no. FLUKE-741B 120, plus adds a serial interface for 2-way
communication with popular PC-based instrumentation management applications. Each FLUKE-740 series process
calibrator includes: mfg. part no. TL224 test leads (2 sets), mfg. part no. AC220 test clips (2 sets), mfg. part no. TP220
test probes (1set), battery pack, battery charger, serial port cable (except mfg. part no. FLUKE-741B 120), HART
communications cable (mfg. part no. FLUKE-744 only), DPC/TRACK sample with free PC communication utility
software (except mfg. part no. FLUKE-741B 120), instruction manual, and NIST traceable calibration report and data.
3-year manufacturer’s warranty.
Mfg. Part No.
Description
Stock No. Price Each
Process Calibrator with Simultaneous Source 83F9130
3795.00
FLUKE-741B 120
and Measuring
83F9131
4795.00
Process Calibrator with 2-Way Serial
FLUKE-743B 120
Interface
48F2061
5795.00
Pressure Calibrator with HART Transmitter
FLUKE-744
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
FLUKE-741B 120 CALIBRATED Process Calibrator with Simultaneous Source
and Measuring
60K7395
3975.00
83F9126
83F9097
48F5502
83F9093
50B9873
83F9094
91F6072
92F7017
2099.00
246.00
146.00
157.00
199.00
189.00
47.65
101.65
ACCESSORIES
FLUKE-700SW
FLUKE-700-IV
BC7217 120
BE9005 120
BP7235
C700
C781
C789
DPC/TRACK Software
Current Shunt
Battery Charger
Battery Eliminator
Nickel Metal Hydride Battery Pack
Hardshell Carrying Case
Compact Softshell Carrying Case
Large Softside Fabric Carrying Case
(34076)
700 SERIES FILTER AND PUMPS
9
700-PMP
FLUKE-700PTP-1
FLUKE-700HTP-1
FLUKE-700PTP-1 PNEUMATIC PRESSURE PUMP
Mfg. Part No. 700PTP-1 For use with 700 series pressure modules or test gauges. Can be directly connected to the
reference port consolidating two separate pieces when performing pressure calibration and testing. Can also be used
with 717 pressure calibrators. Ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to
600 PSI/40 bar.
Mfg. Part No.
FLUKE-700PTP-1
Description
Hand-Held Pressure Pump
Stock No.
55M0610
Price Each
578.00
FLUKE-700PMP PRESSURE PUMP
700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting: 1/8 FNPT.
700P-PMP
Pressure Measuring Pump
31C1618
FLUKE-700HTP-1
Hydraulic Test Pump
55M0607
1282.00
83F9123
1282.00
Mfg. part no. U1401A handheld multi-function calibrator/meter incorporates complete DMM performance into a
process calibration tool, with the unique ability to both source and measure simultaneously. Capable of generating
constant voltage and current, it also functions as a pulse signal generator, well-suited for calibration of process control
devices such as flow meters. Simultaneously, the U1401A allows users to conveniently utilize its DMM functions as well,
such as to measure output mA readings from devices such as transmitters and isolators. Calibration needs that require
both sourcing and measuring at the same time are met. Its standalone DMM features are just as versatile to be used on
the electronics bench. Capable of measuring both AC and DC signals, it readily tackles everyday DMM tasks such as
measuring resistance, frequency, temperature and diode checking.
Mfg. Part No.
Description
U1401A Handheld Multi-Function Calibrator/Meter
Stock No.
51P3341
Price
Each
751.00
51P3342
04M7389
04M7390
53M4046
53M4047
30.01
60.47
42.33
59.39
180.00
U1401A ACCESSORIES
925.00
M-2216
83F9122
600 psi
Simultaneous source and measure in a single
instrument:
• Conveniently source voltage, current or pulse signals and perform
DMM measurements at the same time, with the same tool
Process calibration tool incorporated with complete
DMM features:
• Full-featured DMM capable of measuring AC and DC signals, resistance,
frequency, temperature as well as perform diode and continuity checks
• Auto SCAN and RAMP modes to ease automated testing
Reliability and value:
• Mfg. part no. U1401A comes complete with certificate of calibration,
stylish carrying case, protective holster, rechargeable battery pack, AC
power adapter and power cord, calibrator and meter standard test lead
kit, yellow test lead for mA simulation, printed Quick Start Guide.
• Data logging software and optional IR-USB cable for PC connectivity
• Three-year manufacturer’s warranty
U5481A
U1160A
U1161A
U1181A
U1182A
IR to USB cable
Standard Test Lead Kit
Extended Test Lead Kit
Immersion Temperature Probe
Surface Temperature Probe
2216
C-2216
300 psi
HANDHELD MULTI-FUNCTION
CALIBRATOR/METER
(68957)
STIBOINFO((NEWARK_MAIN_C124_2216))
Stock No. Price Each
18C0609
1494.00
83F9098
1112.00
83F9099
1112.00
83F9107
1112.00
83F9100
1112.00
83F9108
1112.00
83F9101
1112.00
83F9109
1112.00
83F9102
1112.00
83F9103
1112.00
18C0619
1112.00
83F9104
1112.00
83F9105
1112.00
83F9106
1112.00
83F9110
1812.00
83F9111
1812.00
83F9112
1812.00
83F9113
1282.00
83F9114
1282.00
83F9115
1282.00
83F9116
1282.00
83F9124
1282.00
83F9125
1282.00
83F9118
1282.00
83F9119
1282.00
83F9120
1282.00
83F9121
1282.00
(34077)
379.00
FLUKE-700HTP-1 HYDRAULIC TEST PUMP
Mfg Part No. 700HTP-1 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to
10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as mfg. part nos.
Fluke-700P09, 700P29, 700P30 and 700P31.
Maximum
Overpressure
30 in. H2O
30 in. H2O
3 psi
3 psi
15 psi
15 psi
45 psi
45 psi
90 psi
300 psi
900 psi
1500 psi
3000 psi
3000 psi
6000 psi
10000 psi
15000 psi
20 psia
60 psi
105 psia
315 psia
15 psi
45 psi
5 psi
15 psi
45 psi
90 psi
Y-2216
B-2216
USEXP1-2216
ND3% BASE1
XXXX3817-2217-1-Page 2217 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:20 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
PROCESS METERS & CALIBRATORS • TACHOMETERS • MOTOR PHASE/ROTATION TESTERS
MODEL 93 HAND HELD
TACHOMETER KIT
HANDHELD MULTI-FUNCTION CALIBRATOR/METER (CONT.)
U1401A ACCESSORIES
Price
Stock No. Each
53M4048 69.47
53M4049 10.07
53M4051 20.04
Mfg. Part No.
Description
U1183A Air Temperature Probe
U1184A Temperature Probe Adapter
U1186A Thermocouple ( K-type) and Adaptor
(142152)
COMBO TACHOMETER
FEATURES:
• Measures rotational and surface speed
• Built-in memory
• Digital Display
• Auto power off function
• Easy to select units and mode functions
• Contact and non-contact measurement
• Agency Approvals & Certifications: CE
The Redington Model 9300-HTK hand tachometer is simple to use… push the measurement button to record the speed.
It also has a Max/Min/Avg recall with 40 points of memory standard. The tachometer can be used for contact or
non-contact measurement on rotating machinery or surface speed. The 9300-HTK can indicate RPM or rotational
speed, length measurement, meters, yards, or feet per minute. The photoelectric probe is used with reflective tape to
detect rotating objects. The accessory adaptor with pointed tip can be added for contact measurement or wheels can be
used for surface speed measurement. Optional equipment include: 9V battery, Instruction manual, Certificate of
calibration, Cone adapter, Funnel adapter, Contact adapter, Master wheel 3.94” [100mm], Reflective tape 0.59” x
20.67” [15mm x 525mm].
SPECIFICATIONS:
• Accuracy: ±0.02% v. reading ±1 Digit
• Length: 0 ...99999 m / 0...99999 ft / 0...99999 in
• Measuring Ranges(rpm): optical: 1 - 99999 min; mech.: 1 - 19999 min
• Sensing Distance (optical): max. 600 mm (24 in)
• Battery type: 2x AA 1.5V Battery LR6 (ALKALINE) or rechargeable
• Operating Temperature: 32 to 122°F
• Size: 175x60x28 mm (7x2.5x1 in)
SPECS FOR SPEED:
Mfg. Part Nos.
Speed
Mfg. Part No.
TACH20
Dia. 1 m
0.10 ...1999 m/min
0.40 ...6550 ft/min
4.00 ...78700 in/min
0.10 ...33.30 m/sec
0.10 ...109 ft/sec
Mfg. Part No.
● 9300-HTK
TACH20
Dia. 6 in
0.10 ...1524 m/min
0.40 ...5000 ft/min
4.00 ...60000 in/min
0.10 ...25.40 m/sec
0.10 ...83.33 ft/sec
Description
Dia. 12 in
0.40 ...609.6 m/min
0.40 ...2000 ft/min
4.00 ...24000 in/min
0.10 ...10.16 m/sec
0.10 ...33.30 ft/sec
Stock No.
11P0029
Tachometer
Price Each
349.95
(135707)
Price Each
Each
181.00
Stock No.
05N0111
(115443)
DIGITAL PHOTO TACHOMETER
•
•
•
•
Large 5-Digit LCD
1 Second Response Time at Distances from 2″ to 6″
Stores Last/Min./Max. Readings
Includes 23″ Reflective Tape, Carrying Case and
Owners Manual
• Requires (4) 1.5V ″AA″ Batteries (Not Included)
Range
Resolution
Accuracy
Dimensions
Weight
• Hold button freezes display reading
• Ergonomically designed and pocket sized housing with protective finger
guard
• Easy to operate by simply contacting the rotating object with the sensor
tip and read
• (Mfg Part No. 461750) Contact model with surface wheels enable
tachometer to measure linear surface speeds in ft/min, m/min, and yd/
min
• (Mfg Part No. 461700) Non-contact integral light beam model with
ideal measurement range up to 6″ (150 mm) distance
• One year warranty
Stock No.
50N1386
Price Each
1-4
159.90
72-6633 CALIBRATED W/DATA
Digital Photo Tachometer
Calibrated w/Data
50N2290
179.99
(73438)
461750
461750
99,999 count LCD
10 to 9,999rpm
3 to 6560ft/min
1 to 1999.9m/min
1 to 5,000yd/min
±(0.1%rdg +2d)
0.001
0.0001
5.87x1.97x1.3″
(149x50x33mm)
PHASE ROTATION
INDICATOR
Features:
• Three phase indication
• Indication of phase rotation
• Large LCD display
• Voltage range: 40 to 700V
• Frequency range: 15-400Hz
• No battery required — power supplied
by unit under test
• Rated CAT III 600V to ground
• Two-year manufacturer’s warranty
5oz (142g)
Description
Mini Photo Tachometer
Mini Contact Tachometer
Spare Reflective Tape (5pks 23″ each roll)
Description
Digital Photo Tachometer
CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT
461700
99,999 count LCD
10 to 99,999rpm
—
—
—
±(0.1%rdg +2d)
0.001
—
4.88x1.97x1.3″
(124x50x33mm)
Weight: 4oz (114g)
5∼99,999RPM
0.1RPM <1000RPM, 1RPM ≥1000RPM
±(0.05% + 1 digit)
27⁄8″W x 71⁄2″L x 11⁄2″H
8.8 oz.
Mfg. Part No.
72-6633
Complete with 9V battery: Mfg. part no.461700 includes reflective tape and mfg.
part no. 461750 includes surface wheels
SPECIFICATIONS
Mfg. Part No.
461700
461750
461937
Description
Hand Tachometer Kit;
RPM Measuring
Range:6.0 to 99999 RPM;
Tach Display:LCD; Tach
Features:Memory; Tach
Type:Contact/NonContact
Accurate non-contact measurements from 5 to 100,000RPM.
Simply place a reflective marker on a rotating object, point and
measure.
SPECIFICATIONS
POCKETTACH MINI®
TACHOMETERS
Mfg. Part No.
Display Counts:
Range rpm:
ft/min:
m/min:
yd/min:
Basic accuracy:
Max rpm Resolution:
ft/min Resolution:
Dimensions:
• Combination unit - photo and
contact
• Laser sighting operating range up
to 40.0″ [1000mm]
• Auto ranging - fixed decimal
• Low battery indicator
• Carrying case included, Tripod
mounting bushing
Stock No.
26K9266
26K9267
27K9916
Price Each
139.99
139.99
39.99
9
Mfg. part no. FLUKE-9040 phase rotation indicator is a portable, handheld instrument designed to detect and measure
the phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems.
Provides clear indication of the three phase via an LCD display and the phase rotation direction (clockwise or
counterclockwise) to determine correct connections. It allows rapid determination of phase sequence and has a voltage
and frequency range suitable for commercial and industrial applications. Meets IEC 61010/EN 61010, IEC 61557-7/EN
61557-7 electrical safety specifications. Comes complete with three self-retaining test leads, probes, alligator clips and
users manual.
(91074)
Mfg. Part No.
FLUKE-9040
Description
Phase Rotation Indicator
Stock No.
52K4229
Price Each
249.95
(85494)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2217))
C-2217
M-2217
Y-2217
B-2217
USEXP1-2217
2217
ND3% BASE1
XXXX3818-2218-1-Page 2218 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:20 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
MOTOR PHASE/ROTATION TESTERS • GAUSSMETERS
PHASE SEQUENCE AND
MOTOR ROTATION TESTER
5100 GAUSS METER & PROBES (CONT.)
Mfg. Part No.
SAH17-1904
SAH17-1902
Stock No.
89J1899
89J1898
4″ Probe Length, 0.180″ dia.
4″ Probe Length, 0.158″ dia.(incl. w/5180)
2″ Probe Length, 0.158″ dia.
4″ Probe Length, 0.187″ dia.
2″ Probe Length, 0.187″ dia.
85J8888
89J4065
89J4064
89J1855
89J1854
304.50
304.50
304.50
304.50
304.50
89J4053
85J8922
421.23
779.07
Features:
• Identifies 3-phase sequence and open phase
check
• Motor shaft rotation indication protected by
CAT III circuitry
• CAT III 600V rated for both testing segments
• Meets EN61010 safety requirements, CSA,
EN61557-7
MODEL 5180 PROBES
Mfg. part no. PRM-4 phase sequence and motor
rotation tester comes complete with test leads (red,
green, and blue) with alligator clips mfg. part no.TLPRM-4, 9 V battery, soft vinyl case and users manual.
MODEL 5170/5180 GAUSSMETER PROBES
Mfg. Part No.
PRM-4
HTH17-0604
STD18-0404
STD18-0402
SAD18-1904
SAD18-1902
Description
Phase Sequence and Motor Rotation Tester
Stock No.
78M6840
Price Each
109.95
STB1X-0201
MOS51-3204
Price Each
Each
304.50
304.50
Description
4″ Probe Length, 0.187″ dia.
2″ Probe Length, 0.187″ dia.
1″ Probe Length, 0.050″ dia.
4″ Probe Length, 0.285″ dia.
(135712)
(147132)
6000 SERIES HALL-EFFECT GAUSSMETER
PHASE AND MOTOR
ROTATION METER
Features:
• Indicates phase presence
• Indicates phase rotation
• Indicates motor rotation/wiring
• Indicates battery status
• Phase and motor rotation
indicator works as low as 1VAC
• Phase presence indication from
as low as 100VAC
Mfg. part no. 302 is a 3-phase presence and rotation meter combined with a 3-phase motor rotation tester. Can be
used on a powered system (supply side) or on an unpowered motor (load side). Fused. Includes color-coded test leads,
soft case.
Mfg. Part No.
302
Description
3-phase presence and motor rotation tester
Stock No.
54M5380
Price Each
79.00
(101647)
• Large Format LCD
• Dual 33⁄4 -Digit Readouts
• Temperature Measurement
• Displays in Gauss, Tesla or Ampere/Meters
• Peak Hold
• Max./Min. Hold
• Corrected Analog Output
• Auto Range
• Temperature Compensated Probes
• Auto Zero/Auto Calibration
• RS-232 Interface
• Rechargeable Battery
• Compatable with Type 9200 Probes
• CE Compliant
Mfg. part no. 6010 Hall-effect gaussmeter represents the latest innovations and state-of-the-art design. Exclusive
Dynamic Probe Correction feature, along with temperature compensation, allows measurements up to 300kG with a
basic accuracy of 0.25%. Key features include: peak hold, max./min. hold, auto zero, auto range, relative mode, and
temperature measurement. Mfg. part no. 6010 also features a corrected analog output (± 3V Full Scale for each range),
an RS-232 communications port, a rechargeable battery and probe temperature compensation which allows the user to
take temperature readings (–40°C to +85°C) while monitoring the magnetic field. The easy-to-read large format
alpha-numeric LCD with dual 33⁄4 -digit read out gives the user magnetic field flux density reading while also displaying
temperature (or peak hold, or max./min. hold). User prompts on the custom formatted LCD allow fast, simple push
button operation. All models come equipped with a zero gauss chamber, accessory hard case, built-in rechargeable
battery, quick reference card and instruction manual.
4100 GAUSS METER
Mfg. Part No.
6010
• Gauss or Tesla Display Units
• Waveform and RMS Analog Output (4190)
• Selectable X, Y, or Z Axis plus Vector
Summation
• Min/Max Hold
• True RMS Reading and Relative Mode
• Measuring Range: 0.1mG to 199.9 .uT
• Resolution: 0.1 mG / 0.01 uT
• Frequency Respone +/-5%: 30 to 2kHz
Basic
Accuracy
+/-(2% + 1 digit)
+/-(1% + 1 digit)
Stock No.
83F9146
Axial Probe
Temperature Compensated Axial Probe
Transverse Probe
Temperature Compensated Transverse Probe
93C9428
93C9429
93C9430
93C9431
Price Each
2896.28
AVAILABLE PROBES
HAD61-2508-05
HAD61-2508-05-T
HTD61-0608-05
HTD61-0608-05-T
759.51
906.95
811.55
913.32
(41770)
Lightweightand completely self contained, the easy to use 4100 Series ELF Meters are ideal for commercial or home
use. The 4100 Series accurately measures Extremely Low Frequency Magnetic Fields generated by electrical
equipment. Applications include detecting magnetic field emissons from a wide variety of sources, including video
display terminals, AC power lines office equipment, household appliances, and all types of electronic equipment. The
4100 Series Hand-HeldGaussmeter’s built-insoftware eliminates the need for complex calibration procedures. User
prompts on the custom formatted LCD allow fast, simple push button operation. All models come with instruction
manual, soft carrying case, and four AAA batteries.
Mfg. Part No.
4180
4190
Description
Hall-Effect Gaussmeter
Analog
Output
None
8K samples/sec
Price Each
Each
282.32
517.96
Stock No.
96M1812
38M8608
CABLE HEIGHT METERS
•
•
•
•
Shortens measuring time
Inherently safe — 3 button operation
Easy to use and compact
Calibration and maintenance free
operation
• Non-contact measurement
• Measures the height of up to six
overhead cables
(135713)
CHM series cable height meters use ultrasonic techniques to determine the height of overhead power cables up to 75
feet. Results may be displayed in either meters or feet and inches. The meters measure the lowest cable’s height and the
spacing between the next five cables. A battery and instruction manual are included.
5100 GAUSS METER & PROBES
9
• Auto Zero, Min/Max./Peak Hold
• Auto Range and Relative Mode
• Gauss, Tesla or Ampere/Meter readings
• 5180 features a corrected analog output (+/- 3V FS) and a USB communication port
This new design incorporates the use of digital signal processing technology making it the world’s first hand-held
gaussmeter to have a digital signal processor (DSP) on board. F.W. Bell’s exclusive Dynamic Probe Correction allows
measurements from 0 to 30 kG with a basic accuracy of 1%. Built-in software eliminates the need for complex
calibration procedures. User prompts on the custom formatted LCD allow fast, simple push button operation. All models
come equipped with a detachable transverse probe, zero gauss chamber, instruction manual, hard carrying case, and
four AA batteries. Axial, ultra thin transverse and low-field probes are available as options.
Mfg. Part No.
5170
5180
Basic DC
Accuracy
2%
1.1 %
Frequency
Bandwidth
DC-20 kHz
DC-30 kHz
Digits
3 1/2
3 2/3
Stock No.
60K8441
89J5968
Mfg. Part No.
659600 (CHM600)
659600E (CHM600E)
Mfg. Part No.
Description
659600 (CHM600) Cable Height Meter, 50 Feet Max
659600E (CHM600E) Cable Height Meter, 75 Feet Max
(89378)
Price Break 1
Each
999.78
1344.88
MODEL 5170 PROBES
Mfg. Part No.
HTD18-0604
STH17-0404
STH17-0402
Description
4″ Probe Length, 0.180″ dia.
4″ Probe Length, 0.158″ dia. (incl. w/5170)
2″ Probe Length, 0.158″ dia.
Stock No.
85J8874
89J4103
89J4102
Price Each
Each
304.50
304.50
304.50
(148838)
2218
STIBOINFO((NEWARK_MAIN_C124_2218))
C-2218
M-2218
1.00 inch
10-50 feet
10-75 feet
Y-2218
B-2218
USEXP1-2218
Minimum Cable Size
0.50 inch 0.25 inch 0.125 inch
10-50 feet 10-39 feet 10-32 feet
10-50 feet
Stock No. Price Each
60K8346
840.00
70K7561
960.00
ND3% BASE1
XXXX3819-2219-1-Page 2219 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:20 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
INSPECTION • COMPONENT TESTERS
FLUKE LASER
DISTANCE METERS
HANDHELD CAPACITANCE/LCR METERS (CONT.)
ACCESSORIES
Mfg. Part No.
U1701A-SMD
U1732A-SMD
U1174A
U5481A
U1782A
U1780A
FEATURES:
• Reduction of estimation errors, saving both time and money
• Instant measurement with one-button operation
• Easy targeting with bright laser
• Quick calculation area (square footage) and volume
• Pythagoras calculation for determining distance indirectly
from two other measurements
• Two-year warranty
Description
Soft Carrying Case and SMD Tweezer Bundle
Soft Carrying Case and SMD Tweezer Bundle
Soft Carrying Case
IR to USB cable
SMD Tweezer
Power Adapter and Cord
Stock No.
51P3611
51P1540
78M8406
51P3342
51P3616
51P3615
Price
Each
30.11
306.11
20.04
30.01
30.01
150.00
(142151)
The compact and handy Fluke laser distance meters were designed
for indoor and limited outdoor applications. Both models are simple
to operate, with the Fluke durability and quality you expect. And, with
shortcut keys for addition, subtraction, area and volume, measurements could not be simpler.
SPECIFICATIONS:
DIGITAL MINI MICROSCOPE
Mfg. Part Nos.
FLUKE 411D
0.1 m to 30 m
Range (for extended
(0.33 ft to 100 ft)
distances, use a target plate)
Measuring accuracy
± 3 mm (0.118 in)
Units displayed
00.000 m, 000 ft 00in 1⁄8, 000.00 ft
Laser Class
Laser type
Automatic power off
Continuous measurement
Addition/subtraction
Battery life
LCD illumination
Data locations
Min/Max
Audible feedback
Pythagoras (Indirect
measurement)
Ingress protection
Dimensions
II
635 nm, < 1 mW
after 180 seconds
•
•
up to 3,000 measurements
-
FLUKE 416D
0.05 m to 60 m
(0.16 ft to 200 ft)
± 1.5 mm (± 0.059 in)
00.000 m, 000 ft 00in 1⁄16, 000.00
ft
II
635 nm, < 1 mW
after 180 seconds
•
•
up to 5,000 measurements
•
10
•
•
Simple
Full
IP40
123 mm x 50 mm x 26 mm
(4.84 in x 1.97 in x 1.02 in)
150 g (5.29 oz)
Weight
-25 °C to 70 °C (-13 °F to 158 °F)
Temperature Storage range
Temperature Operation range 0 °C to 40 °C (32 °F to 104 °F)
up to 3500 m
Operating altitude (ISO 9022)
maximum 85% for 24 h
Storage humidity (at 35 °C)
AAA (2)
Batteries
Mfg. Part No.
FLUKE-411D
FLUKE-416D
FLUKE 416D
FLUKE 411D
Description
Laser Distance Meter, 100 ft.
Laser Distance Meter, 200 ft.
IP54
135 mm x 46 mm x 31 mm
(5.31 in x 1.81 in x 1.22 in)
110 g (3.88 oz)
-25 °C to 70 °C (-13 °F to 158 °F)
0 °C to 40 °C (32 °F to 104 °F)
up to 3500 m
maximum 85% for 24 h
AAA (2)
Stock No.
06P9669
06P9670
Price Each
109.00
229.00
• 1.8″ TFT color LCD screen with 2MB memory
• 7x to 108x magnification range
Optical Zoom: 7x to 27x
Digital Zoom: 4x
• Four white LEDs with adjustable brightness for object
illumination
• 5 Image Effect modes: normal, gray, inverse, emboss,
and dual window view
• Dual Window View simultaneously displays the
magnified image next to the original image
• One year warranty
Mfg. part no. MC108 dual window view simultaneously displays the magnified image next to the original image.
Includes microscope stand, three AAA Ni-MH rechargeable batteries, adaptor/charger, Windows® compatible PC
software with mini USB cable, cleaning cloth, and wrist strap. Dimensions: 4.7 x 2.2 x 0.8″ (120 x 56 x 20mm). Wt. 2.5
oz. without batteries. CE compliant.
Mfg. Part No.
MC108
Description
Digital Mini Microscope
Stock No.
71P2407
Price Each
299.99
(148527)
875B 31⁄2 -DIGIT LCD LCR METER
• 8 Capacitance Ranges: 200pF to 20mF
• 7 Resistance Ranges: 2Ω to 20MΩ
• 7 Inductance Ranges: 200µH to 200H
Rotary switch allows easy function/range selection. Measure dissipation factor of capacitors and 1/Q of inductors. Low battery and
overload indicator. Overload: fuse protected 250VAC, 100mA. Measurement rate: 2.5 per second, nominal. Includes test clips, 9V battery,
spare fuse, instructions.
Mfg. Part No.
875B
(133292)
Description
LCR Meter
Stock No.
46F8205
Price Each
1-2
222.88
(5293)
HANDHELD
CAPACITANCE/LCR
METERS
878A AND 879 DUAL DISPLAY LCR
METERS WITH AUTORANGING
• 8 Capacitance Ranges: 1000pF to 10mF
• 7 Resistance Ranges: 10Ω to 10MΩ
• 8 Inductance Ranges: 1mH to 10,000H
Features:
• Min/Max/Average values recordings
• Visible and audible tolerance mode for component
sorting
• Guard terminal for better noise immunity (to be used
with SMD tweezer)
• Dual display with backlight (U1701A/32A)
• Data Hold function to freeze readings
• Relative Mode
Mfg. part nos. U1731A/32A feature dissipation factor and quality factor, one-touch access to capacitance, inductance
and resistance measurements, 20,000 counts resolution and 2 to 4 selectable test frequencies. Additionally, mfg. part
no. U1732A provides auto calculation of phase angle and back light. Mfg. part no. U1701A features 11,000 counts
resolution. PC data logging is optional to all units via IR-to-USB cable. Each unit comes complete with certificate of
calibration, alligator clip leads, 9V alkaline battery, data logging software, quick start user’s and service guides.
Three-year manufacturer’s warranty.
Mfg. part nos. 878A and 879 LCR meters also measure capacitor
dissipation factor and inductor Q factor. Simultaneously displays these
values and remembers minimum and maximum. Keeps running average of tested component values. Relative mode displays difference
between measured and reference values. Tolerance mode beeps to
indicate component outside 1%, 5%, 10%, (20% mfg. part no. 879
only) reference value. Mfg. part no. 878A has two test frequencies
(120Hz, 1KHz); mfg. part no. 879 has four test frequencies (100Hz,
120Hz, 1KHz, 10KHz). 41⁄2 -digit LCD displays values to 19,999, and the
secondary 3-digit 1,000 count display reads D or Q. Mfg. part no. 879
has backlit display for poorly lit areas. Both models can be used in either
auto or manual ranging modes. Includes pair of test alligator clips, DC
9V battery and user manual.
9
SPECIFICATIONS
Mfg. Part No.
Test Signals
Functions
Primary Counts
Inductance
Capacitance
Resistance
U1701A
DC
C
11,000
Up to 199.99mF
-
U1731A
120Hz, 1kHz
L,C,R,Q,D
20,000
Up to 999.9H
Up to 19.99mF
Up to 9.999MΩ
Mfg. Part No.
878A
879
U1732A
100/120Hz, 1k/10kHz
L,C,R,Q,D,θ
20,000
Up to 999.9H
Up to19.99mF
Up to 9.999MΩ
Mfg. Part No.
Description
U1701A Handheld Capacitance Meter
U1731A Handheld LCR Meter
U1732A Handheld LCR Meter
Stock No.
51P3610
51P3612
51P3614
Description
Dual Display LCR Meter with Autoranging
Deluxe Dual Backlit Display LCR Meter with Autoranging
C-2219
M-2219
Price Each
1-2
276.39
299.00
(5294)
Price
Each
150.00
276.00
331.00
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2219))
Stock No.
07J0231
96H7063
Y-2219
B-2219
USEXP1-2219
2219
ND3% BASE1
XXXX3820-2220-1-Page 2220 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:21 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
COMPONENT TESTERS • CABLE & CONTINUITY TESTERS (COPPER)
BATTERY CAPACITY ANALYZERS
MICROSCANNER2 CABLE VERIFIER (CONT.)
Mfg. Part No.
MS2-100
MS2-KIT
Description
Microscanner2 Cable Verifier
Microscanner2 Cable Verifier Kit
Stock No.
47M2208
47M2205
Price Each
449.00
749.00
MicroScanner2 Remote Identifier Kit 2-7
MicroScanner2 Professional Kit Carrying Case
47M2204
47M2203
249.00
79.00
ACCESSORIES
MS2-IDK27
MS2-CPK
(100939)
CABLE-CHECK™ TESTERS
601
600
602
These battery capacity analyzers are ideal for testing lead acid batteries used in UPS devices, emergency lighting,
sprinkler systems, communications equipment and alarm systems. All testers display stored charge capacity along with
loaded and unloaded voltage. Mfg. part nos. 601 and 602 also display batteries internal resistance.
SPECIFICATIONS
Battery Test Voltages
Selectable Amp-Hours
Dimensions
Mfg. Part No.
600
601
602
600
12
7, 12, 24, 42, 65, 100
6.3(H) x 3.14(W) x 1.6″(D)
601
602
6, 12
24, 36, 42
1-100 Amp-Hrs. in 1 Amp-Hr. Steps
9.5(H) x 3.14(W) x 1.6″(D)
Description
12V Lead-Acid Battery Capacity Analyzer
6V and 12V Lead-Acid Battery Capacity Analyzer
24V, 32V, and 42V Lead-Acid Battery Capacity Analyzer
Stock No.
29C9349
84H9306
84H9307
Price Each
1-4
376.14
465.09
471.75
(68948)
INTELLITONE™ PRO KITS WITH
TONER AND PROBE
• InteliTone digital processing eliminates noise and false signals
• New SmartTone™ analog toning precisely isolates individual
wire pairs
• Locates cables safely and effectively on active networks
• Verifies twisted-pair installation with visual end-to-end
continuity test
• Identifies, diagnoses, and troubleshoots datacom/telecom
services
INTELLITONE™ Pro 200 also features:
• Identifies and diagnoses 10/100/1Gb Ethernet link connectivity with
NIC/Hub indication
• Identifies and diagnoses POTS with Line 2 service and polarity
• Validates twisted pair installation with Cablemap capability, which
identifies common cable miswires
IntelliTone™ Pro’s breakthrough digital and analog toning finds cables other toners/probes can’t. Mfg. part no.
MT-8200-50A IntelliTone Pro 100 toner and probe kit includes: toner and probe, coax F connector adapter, RJ-11 and
RJ-45 patch cable, test leads with alligator clips, lanyards, owner’s CD, quick-start guide and two 9V batteries. Mfg.
part no. MT-8200-60A IntelliTone Pro 200 toner and probe kit includes: toner and probe, coax F connector adapter, two
RJ-11 and two RJ-45 patch cable, test leads with alligator clips, lanyards, owner’s CD, quick-start guide and two 9V
batteries.
Mfg. Part No.
MT-8200-50A
MT-8200-60A
Description
IntelliTone Pro 100 Kit with Toner and Probe
IntelliTone Pro 200 Kit with Toner and Probe
Stock No.
92H6882
92H6885
IntelliTone Pro Carrying Case
IntelliTone Pro Test Leads with Bed of Nails
IntelliTone Pro Test Leads with Alligator Clips
92H6889
92H6894
92H6895
Price Each
146.00
198.00
1577
1594
PC CABLE-CHECK™ PRO
LAN and A/V CABLE-CHECK™
• Auto and manual scanning modes
• Continuity tester for network and coax cable
• True cable mapping
• Quickly check cable installations and patch
• Easy-to-read LED Indicators
cords
• Power shut-off conserves battery
• Automatic scanning
• Rugged case with built-in handle
• User selectable slow or fast speeds
• Non-slip rubber feet grip desk or bench
• Easy-to-use with clear LED read-outs
• Cable length: 1000′ max. (600′ 75Ω coax)
• Cable length: 1650′ max.
• Output signal: 8V DC @ 10mA
• Output signal: 9V DC @ 10mA max.
Mfg. part no. 1577 PC Cable-Check™ Pro cable tester is designed to test popular PC cable by identifying the wire
connection status: open, short, or cross, in LAN, telephone, Serial, coaxial, USB, VGA, Mini-USB, S-video, FireWire, PS/2
keyboard and parallel printer cable. It is a simple and easy-to-use troubleshooting tool ideal for cable assembly testing
and quick diagnostic checking of cable with the following terminations: RJ45, RJ11 and RJ12 UTP/STP modular plugs,
BNC and CATV ″F″ coaxial, 9-, 15- and 25-pin D-sub, 15-pin HD-sub, A, B, and mini 5-pin USB, 4- and 6-pin 1394
FireWire and 36-pin Centronics printer. Requires 9V battery (included). Size: 11″H x 6.56″W x 1.60″D. One-year
manufacturer’s warranty.
Price Each
Mfg. Part No.
Description
Stock No.
1-4
PC Cable-Check™ Pro
63K9834
207.59
1577
Mfg. part no. 1594 LAN and A/V Cable-Check™ tester is designed for quick and easy testing of RJ45, UTP or STP
modular plugs, CATV ″F″ coaxial, RCA, and BNC cabling used in smart home installations. Tests RJ45 patch cords and
network installations to identify good connections, opens, shorts or cross-connections. Identifies data and telephone
connection schemes and maps cable pin-out. Tests continuity of network and coaxial cable (Cat5, Cat5e, Cat6, RG6,
RG6 Quad, RG59) and installed cable runs. Includes main and remote units, two RJ45 patch cords, 75-ohm male
terminator, CATV ″F″ female adapter, two CATV ″F″(male)-to-BNC (female) adapter, two CATV ″F″(male)-to-RCA
(female) adapter, 9V battery and durable nylon carrying case. Battery life for 15 hours continuous use. One-year
manufacturer’s warranty.
Mfg. Part No.
Description
Stock No.
Price Each
LAN and A/V Cable-Check™
63M4214
44.99
1594
(7559)
ACCESSORIES
MT-8202-05
MT-8203-20
MT-8203-22
20.00
19.00
11.00
(79293)
MICROSCANNER2 CABLE VERIFIER
9
CABLE FAULT LOCATORS
•
•
•
•
Simple operation
Tough ABS case
IP 54 protection
3-year manufacturers warranty
TDR cable fault locators find faults in metallic electrical cables, including
twisted pair, coaxial, and parallel cables. TDR500, for use on de-energized
cable only, has a warble tone for tracing with any tone tracing probe.
655510F (TDR1000/2), suitable for both energized and de-energized
cables, has a display that is twice the size, TX null feature for finding near
end faults, and a fast find feature to locate faults in seconds. Six AA
batteries, test leads, and instruction manual are included.
SPECIFICATIONS
• Length meter shows distance to termination,
open or short
• PoE detection rules out insufficient power
• Detail mode gives additional test status
information
• Intuitive icons show what’s at the end of any
cable
• Modular port accepts RJ45 and RJ11 plugs
• Coax connector for video and audio testing
MS2-KIT
MS2-100
MicroScanner2 displays all key test results -- wiremap, pair lengths, distance to fault, cable ID and far-end devices -- on
one screen. Both the main unit and the far-end identifiers can be used to test telephone jacks, Ethernet jacks, and CATV
outlets right out of the box. Built-in Intellitone digital and analog toning to precisely locate virtually any wire pair. Mfg.
part no. MS2-KIT Microscanner2 kit includes: Cable Verifier, remote identifiers #2-7, Intellitone Pro 200 probe, shielded
twisted pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to8 alligator clip bare wire adapter, F coax push-on patch
cord, accessory soft pouch, batteries and operator guides, all packaged in a deluxe carry case.
TDR500
655510F (TDR1000/2)
Ranges (feet)
100, 300, 1000, 3000, 10,000
30, 100, 300, 1000, 3000, 10000
Accuracy
+ 1% range + 1 pixel
+ 1% range + 1 pixel
Resolution
1%
1%
Output Pulse
5V peak to peak
5V peak to peak
Gain
Automatic
4 selectable steps per range
Velocity Factor
0.30 to 0.99, 0.01 per step
0.20 to 0.99, 0.01 per step
De-Energized Cable
Yes
Yes
Energized Cable
Yes
Input Protection
IEC61010-1, 300V CAT3
TX Null
0 to 120 Ohms
Refresh Rate
1 to 3 times per second, selectable
Warble Tone
5V peak to peak
Display
122 x 32 pixel graphic LCD
128 x 64 pixel graphic LCD
Connectors
BNC
Two 4mm safety terminals
Test Leads (two)
300mm long with crocodile clips 2-meters long, shrouded connectors to miniature
crocodile clips
2220
STIBOINFO((NEWARK_MAIN_C124_2220))
C-2220
M-2220
Y-2220
B-2220
USEXP1-2220
ND3% BASE1
XXXX3821-2221-1-Page 2221 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:21 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
CABLE & CONTINUITY TESTERS (COPPER) • CABLE TESTERS (FIBER)
CABLE FAULT LOCATORS
(CONT.)
Mfg. Part No.
TDR500
655510F (TDR1000/2)
Description
Cable Fault Locator
Cable Fault Locator
Stock No.
63K9719
43K9843
Price Each
655.00
1610.00
(89379)
PC CABLE TESTER
Exceeds Cat 5e/6/7 requirements
Fast 9-second Cat 6 Autotest
Fast diagnostics pinpoint faults and suggest fixes
900MHz capability for 10 Gig Ethernet, Class F, CATV
Resident fiber modules allow one-button switching from
copper to fiber
Fast, reliable, and rugged
Color display
12-hour batttery life
Reduces certification costs by as much as 33% a year
All models are upgradable to the top model
DTX series CableAnalyzers™ significantly reduces total time to certify by
improving every aspect of testing. Three times faster and more accurate
than other testers.
Mfg. part no. 72-6707 cable tester is a stand-alone unit. It is designed to test popular PC data cables, monitor, printer,
modem, mouse extension, BNC coax, RJ-45, 1394, and USB cables by identifying the wire connection status: open,
short, cross, miswire, and continuity of wires and pin configuration. It is a simple and easy-to-use trouble shooting tool
ideal for cable assembly testing or by system integrator to quickly check the pin configurations. Requires 9V battery (not
included).
Description
PC Cable Tester
•
•
•
•
•
•
•
•
•
•
• Test For Open, Shorted and Miswired
Cables, Continuity, and Pin
Configuration
• Auto and Manual Scanning
• Adjustable Scan Speed
• Easy-to-Read Multi-LED Display
Mfg. Part No.
72-6707
DTX SERIES CableAnalyzer™
AND ACCESSORIES
Price Each
1-4
139.13
Stock No.
18C2273
(65112)
MULTI-NETWORK AND
MODULAR CABLE TESTER
• Easy Verification of Cable
Continuity, Open, Short and
Miswiring
• Remote Terminator Tests Installed
Cables up to 1000′ Away
• Grounding Test
• Auto or Manual Scanning of PinOuts
DTX-1800
DTX SERIES MAINFRAMES AND PACKAGES
Mfg. part no. DTX-1800 CableAnalyzer™ includes DTX-1800 main unit and smart remote, LinkWare PC software,
16MB MMC card, Cat 6/Class E permanent link adapters (2), Cat 6/Class E channel adapters (2), Headsets for talk (2), AC
chargers (2), carrying case, USB interface cable (mini-B), serial RS-232 cable (DB9 to IEEE 1394), and a user manual.
Mfg. Part No.
DTX-1800
Description
Stock No. Price Each
CableAnalyzer; Test to 900MHz, Certifies Cat. 6 Links 07J2396
8595.00
in 12 Seconds
Mfg. part no. DTX-1200 CableAnalyzer™ includes DTX-1200 main unit and smart remote, LinkWare PC software, Cat
6/Class E permanent link adapters (2) Cat 6/Class E channel adapters (2), headsets for talk (2), AC chargers (2), carrying
case, USB interface cable (mini-B), and a user manual.
Mfg. Part No.
Description
Stock No. Price Each
CableAnalyzer; Tests to 350MHz, Certifies Cat. 6 in 12 07J2395
8268.00
DTX-1200
Seconds
23J8041
11475.00
Copper and Multimode Fiber Certification Kit
DTX-1200-M
15655.00
Copper and Multimode/Singlemode Fiber Certification 20J7037
DTX-1200-MS
Kit
DTX SERIES FIBER MODULE SETS
DTX series fiber modules add record-fast fiber certification and fault location to the DTX series CableAnalyzers™;
ordered separately above.. Quickly certify multimode and singlemode fiber attenuation, length, and polarity.
Mfg. Part No.
DTX-MFM2
DTX-SFM2
Mfg. part no. 72-6706 multi-network and modular cable tester easily reads the correct pin configuration of 10Base-T
cable (category 5), 10Base-2 cable (coax), RJ-45/RJ-11 modular cables, 356A, TIA-568A/568B and Token Ring cable
by comparing transmitting end to the corresponding receiving end. Includes: 2 BNC adapter cables, BNC male/male
adapter, RJ-45 modular cable, carrying case and owners manual, requires 9V battery (not included).
Mfg. Part No.
72-6706
Description
Multi-Network/Modular Cable Tester
Stock No.
18C2275
Price Each
89.95
DTX-GFM2
Description
Set of 2 DTX multimode Fiber Modules--850nm and
1300nm LED Sources
Set of 2 DTX Gigabit Multimode Fiber
Modules--850nm VCSEL and 1310nm Laser Sources
Set of 2 DTX Singlemode Fiber Modules--1310nm
and 1550nm Laser Sources
Mfg. Part No.
DTX-NSM
6490.00
18M6084
5310.00
Description
Network Service Module
Stock No. Price Each
76K2751
1090.00
DTX SERIES OTDR MODULES
Optical Time Domain Reflectometer (OTDR) module snaps onto the Fluke Networks DTX CableAnalyzer and makes the
DTX powerful certification tool a complete, easy-to-use OTDR that shoots and analyzes traces on singlemode and
multimode fiber. Plugs into the back of the DTX series CableAnalyzer main unit.
TONE TEST KIT
Mfg. Part No.
DTX-OTDR-KIT
Mfg. part no. 72-6068 is designed to help identify the termination point of wires or to trace their paths. Built of
high-impact plastic. Kit contains tone generator (Mfg. part no. 72-6065), inductive amplifier (Mfg. part no. 72-6066)
and carrying case (Mfg. part no. 72-6067). The tone generator includes polarity, continuity and 1kHz warble or solid
tone emission. A hanging strap minimizes strain on leads supporting the unit. The inductive amplifier offers features
such as wrist wrap, low battery light and buttset connections with weather cover. It is crushproof up to 4000 lbs.
One-year limited warranty. Tone generator, inductive amplifier, and carrying case can also be ordered separately below.
Description
Combo Kit
Stock No.
66F6719
Tone Generator
Inductive Amplifier
Carrying Case
66F6716
66F6717
66F6718
Description
Includes DTX Compact OTDR Module, launch fibers,
accessories and carrying case
DTX Compact OTDR Module. Includes 850/1300/
DTX-OTDR-QMOD
1310/1550 OTDR Module and carrying case
DTX-QUAD-OTDR 120 Includes DTX-1800 CableAnalyzer and DTX Compact
OTDR Module
Stock No. Price Each
50M3537 11955.00
50M3538
10395.00
50M3542
13515.00
DTX SERIES ACCESSORIES
Mfg. part no. DTX-10GKIT enables testing and certification of twisted pair cabling for 10 Gigabit Ethernet deployments
– whether it is an existing Cat 6 or newly installed Augmented Cat 6 cabling system. Includes two mfg. part no.
DTX-AXTLK1 communication modules, AxTalk Analyzer™ software, mfg. part nos. DTX-PLA002S and DTXCHA01AS, and a total of 8 terminators (2 sets of mfg. part no. DTX-AXTERM).
Mfg. Part No.
DTX-10GKIT
DTX-AXTERM
DTX-CHA001AS
DTX-PLA002S
DTX-COAX
DTX-CH003
DTX-FTK
DTX-PCU6S
DTX-PCU6S/MN
DTX-PCU6S/SR
Price Each
1-9
105.07
ACCESSORIES
72-6065
72-6066
72-6067
18M6085
DTX SERIES NETWORK SERVICE MODULE
Mfg. part no. DTX-NSM network service module certifies cabling, verifies network service availability and link
connectivity, and documents findings in one LinkWare report. Documentation provides clear evidence that the job was
done right. Module plugs into the back of the DTX series CableAnalyzer main unit; order separately above.
(65110)
Mfg. Part No.
72-6068
Stock No. Price Each
84K0583
4655.00
32.02
59.75
15.94
(5390)
DTX-TERA
DTX-CHA011
DTX-PLA011
Description
DTX-1800 Alien Crosstalk Analyzer Kit
Alien Crosstalk Link Terminators - Set of Four
Cat6/Class E Channel Adapter (AXTalk) - Set of Two
Cat6A/Class EA Permanent Link Adapter - Set of Two
DTX Series Coax Cable Adapter Kit
DTX Series Coax Cable Replacement Adapter
DTX Series Multimode Fiber Test Kit
DTX Series UTP Cat 6 Patch Cord Adapter Kit
DTX-PCU6S/MN UTP Cat 6 Patch Cord Main Adapter
DTX-PCU6/SR UTP Cat 6 Patch Cord Smart Remote
Adapter
TERA Adapter Kit
TERA Channel Adapter
TERA Permanent Link Adapter
Stock No. Price Each
18M6086
2865.00
33M7448
270.00
31M9537
255.00
46M2473
835.00
73J6920
625.00
73J6919
325.00
73J6921
1249.00
73J6923
735.00
73J6924
350.00
73J6925
350.00
73J6927
73J6918
73J6926
1130.00
170.00
425.00
(79290)
(148843)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2221))
C-2221
M-2221
Y-2221
B-2221
USEXP1-2221
2221
9
ND3% BASE1
XXXX3822-2222-1-Page 2222 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:21 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
CABLE TESTERS (FIBER)
VISIFAULT™ VISUAL
FAULT LOCATOR
SIMPLIFIBER PRO OPTICAL POWER METER AND FIBER TEST KITS
Mfg. Part No.
FTK1000
FTK2000
FTK1300
FTK1350
FTK1450
FINDFIBER
FINDFIBER-6
• Accelerates end-to-end fiber continuity
checks
• Speeds fiber tracing and identification
• Simplifies fiber polarity verification
• Aids in location of fiber faults including
tight bends, breaks and bad connectors
• Features continuous and flashing modes
• Connects to 2.5mm standard and
1.25mm SFF connectors
• Over 80 hours of battery life with two AA
batteries
62.5 uM Simplex Test Reference Cord Set (SC/LC, LC/
LC), 1m; Mandrel
NFK1-SMPLX-SC 62.5 uM Simplex Test Reference Cord Set (SC/SC), 1m;
mandrel
NFK1-SMPLX-ST 62.5 uM Simplex Test Reference Cord Set (SC/ST, ST/
ST), 1m; Mandrel
NFK2-SMPLX-LC 50 uM Simplex Test Reference Cord Set (SC/LC, LC/LC),
1m; Mandrel
NFK2-SMPLX-SC 50 uM siSimplex Test Reference Cord Set (SC/SC), 1m;
Mandrel
NFK2-SMPLX-ST 50 uM Simplex Test Reference Cord Set (SC/ST, ST/ST),
1m; Mandrel
NFK3-SMPLX-LC Singlemode Simplex Test Reference Cord Set (SC/LC,
LC/LC), 1m
NFK3-SMPLX-SC Singlemode Simplex Test Reference Cord Set (SC/SC),
1m
NFK3-SMPLX-ST Singlemode Simplex Test Reference Cord Set (SC/ST,
ST/ST), 1m
NFA-SC-SINGLE SC Interchangeable Connector Adapter (1)
ST Interchangeable Connector Adapter (1)
NFA-LC-SINGLE
LC Interchangeable Connector Adapter (1)
NFA-ST-SINGLE
NF-MANDREL-625 Multimode Fiber Mandrel for 62.5/125 µm Fiber with 3
mm Jacket (Gray)
NF-MANDREL-50 Multimode Fiber Mandrel for 50/125 µm Fiber with 3
mm Jacket (Red)
NFK1-SMPLX-LC
Description
Visual Fault Locator
1.25 VisiFault Adapter
Stock No.
56J8969
56J8967
Price Each
300.00
92.00
(83018)
SIMPLIFIBER PRO
OPTICAL POWER METER
AND FIBER TEST KITS
45P7931
100.00
45P7932
100.00
45P7933
100.00
45P7934
100.00
45P7935
100.00
45P7936
100.00
45P7937
100.00
45P7938
100.00
45P7939
100.00
45P7929
45P7928
45P7930
53H7347
98.00
98.00
98.00
10.00
53H7346
10.00
70M9806
445.00
• Dual-wavelength testing – complete testing
in half the time
• Additional wavelengths to include 1490 and
1625 – calibrated to extend from typical
enterprise wavelengths for broader
applications
• Min/Max – automated precision tracking of
intermittent power fluctuations
• FindFiber – quick end-to-end cable routing
identification
• CheckActive – audible tone and display icon
alerts you to a live wire
• Saves 1000 results – large internal memory
enables continuous testing and recording;
fully compatible with our popular
LinkWare™ Cable Test Management
Software
• Quickly locate cable fault, polarity, and
connector problems with VisiFault™ VFL*
• Inspect end-faces at 200x magnification with
the FT120 FiberViewer or FT500
FiberInspector Mini*
SUPPORT
KIT CONTENTS AT A GLANCE
• Includes the CableIQ Advanced IT Kit and NetTool VoIP Enterprise Service Kit
• Use the CableIQ Qualification tester to check existing cabling to see if it can support VoIP bandwidth
• Do a VoIP Performance Check using the NetTool Series II inline network tester, or quickly troubleshoot if
issues arise once you are up and running.
• Locate and trace network cables with the included IntelliTone™ Probe
• Save cable and network test reports to PC with included reporting software
Mfg. Part No.
SimpliFiber Pro®
SimpliFiber Pro®
850/1300 Multimode Source
SimpliFiber Pro®
1310/1500 Singlemode Source
VisiFault™ Visual Fault Locator
FT120 Fiber Viewer
Optical Microscope
FT500 FiberInspector Mini
FindFiber Remote
ID Sources
NFC-Kit-Box
fiber optic cleaning kit
Carrying Case
for protection and easy transport
CableIQ™ VoIP
ENTERPRISE
SERVICE KIT
FTK-1000
FTK-2000
FTK-1300
FTK-1350
●
●
●
●
●
●
●
●
●
FTK-1450
●
●
●
●
●
●
●
●
●
●
●
●
●
Gold Support Package for SimpliFiber Pro
GLD-FTK
*Not available in all kit configurations
(142261)
FTK1450
With new advanced capabilities that make testing simple, SimpliFiber® Pro Optical Power Meter and Fiber Test Kits are
the best “go-to” kits for anyone involved in first-line optical fiber cabling installation and verification. Whether you are a
fiber technician or contractor, our expertly configured kits contain all the tools necessary to quickly measure loss and
power levels, locate faults and polarity issues, and inspect and clean connector end-faces. Industry-leading features
such as single-port dual-wavelength testing and auto-wavelength detection, combined with time-saving capabilities
such as CheckActive™, FindFiber™, and Min/Max make SimpliFiber Pro the best fiber test kit on the market.
BASIC VERIFICATION KIT (MULTIMODE)
Includes SimpliFiber Pro power meter, 850/1300 multimode source (SC port), and carrying case.
BASIC VERIFICATION KIT (SINGLEMODE)
Includes SimpliFiber Pro power meter, 1310/1550 singlemode source (SC port), and carrying case.
FULL-FEATURED VERIFICATION KIT with FIBERVIEWER
Includes SimpliFiber Pro power meter, 850/1300 source (SC port), FindFiber Remote ID source, FT120 FiberViewer
optical microscope, VisiFault VFL, LC and ST adapters, and carrying case.
FULL-FEATURED VERIFICATION KIT with FIBERINSPECTOR MINI
Includes SimpliFiber Pro power meter, 850/1300 source (SC port), FindFiber Remote ID source, FT500 FiberViewer
video microscope, VisiFault VFL, LC and ST adapters, and carrying case.
COMPLETE FIBER VERIFICATION KIT
Includes SimpliFiber Pro power meter, 850/1300 and 1310/1500 sources (SC port), two (2) FindFiber Remote ID
sources, FT500 FiberViewer video microscope, VisiFault VFL, LC and ST adapters, NFC-KIT-BOX cleaning equipment,
and carrying case.
9
(CONT.)
Stock No. Price Each
45P6662
1995.00
45P6666
2795.00
45P6663
2965.00
45P6664
4118.00
45P6665
6045.00
45P6657
150.00
45P6658
900.00
ACCESSORIES
VisiFault™ Visual Fault Locator (VFL) traces optical fibers, verifies continuity and fiber polarity, and helps find breaks in
cables, connectors and splices. The bright red laser light is easily visible from a distance. Continuous and flashing output
modes makes identification easier. Ruggedly constructed with an energy-absorbing, impact-resistant case to ensure
years of trouble-free use. A handy lanyard attachment and a carrying case make it easy to attach the VisiFault™ to your
belt where it is readily available.
Mfg. Part No.
VISIFAULT
NF380
Description
Basic Verification Kit (Multimode)
Basic Verification Kit (Singlemode)
Full-Featured Verification Kit with FiberViewer
Full-Featured Verification Kit with FiberInspector Mini
Complete Fiber Verification Kit
FindFiber Remote ID source w/ SC Port, Carrying Pouch
Set of Six (6) FindFiber Remote ID Sources, Carrying
Pouch
●
●
●
Mfg. part no. CIQ-VOIP CableIQ VoIP Enterprise Service Kit is the all-in-one solution for IT desktop professionals who
need to deploy VoIP. The Cable IQ VoIP Enterprise Service Kit bundles two great tools together to support your VoIP
deployment. CableIQ Advanced IT Kit includes: CableIQ main unit with remote adapter, CableIQ reporter software CD,
IntelliTone 200 digital probe, remote IDs #2-7, (2) RJ45-RJ45 patch cord, USB cable, coax ″F″ push-on adapter, 75-ohm
coax patch cord, RJ45/11 universal coupler, RJ11-RJ11 patch cord, owners CD and quick start guide, (4) AA batteries,
test accessory soft pouch, and hard carry case. NetTool Series II Pro VoIP network tester includes: 10/100/
1000Mbps inline, VoIP option, NetProve diagnostics, IntelliTone toning, NetTool Connect PC software, wireview
wiremapper #1, (4) AA alkaline batteries, USB to mini-USB cable, ethernet cable, getting started guide, CD with multi
language user manuals, and soft carrying case.
Mfg. Part No.
CIQ-VOIP
Description
CableIQ VoIP Enterprise Service Kit
(143698)
●
Mfg. Part No.
SFPOWERMETER
Description
Stock No. Price Each
SimpliFiber Pro Power Meter w/ SC Adapter,
45P8143
925.00
Carrying Pouch
1695.00
SFSINGLEMODESOURCE SimpliFiber Pro SingleMode Source 1310/1500 w/ 45P8144
SC Port, Carrying Pouch
2222
STIBOINFO((NEWARK_MAIN_C124_2222))
C-2222
M-2222
Y-2222
B-2222
USEXP1-2222
Stock No.
13P0343
Price Each
3995.00
ND3% BASE1
XXXX3823-2223-1-Page 2223 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:21 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
CABLE TESTERS (FIBER)
SIMPLIFIBER™ OPTICAL LOSS TEST KIT
FIBERINSPECTOR PRO™ VIDEO
MICROSCOPE
• Tests singlemode and multimode links
• Verify system loss and power levels at 850nm,
1300nm, 1310nm, 1550nm with
SimpliFiber™ Power Meter and Sources
• Easily inspects installed fiber end-faces
on patch panels, patch cords and
hardware devices
• Eliminates hazards of inspecting live fiber
• Ten times faster than traditional
microscopes
• New displays provide crisp, clear images
of microscopic debris and end-face
damage
• Various probe adapter tips allow for
inspection through different connector
port types
SimpliFiber™ optical loss test kits provide all the tools needed to verify
proper installation and maintain optical fiber cabling infrastructures in
one protective carrying case.
BASIC FIBER VERIFICATION TEST KIT
Mfg. part no. FTK-150 is a starter kit for installing and maintaining fiber
links with multimode optical fiber. Verifies optical loss and power levels
at 850nm and 1300nm. Order singlemode sources, microscope, and
visual fault locator as needed; go online or call.
FIBERINSPECTOR MINI™ AND CLEANING KIT
Mfg. part no. FT525. Use FiberInspector™ Mini to examine installed
fiber terminations or ensure terminations are smooth and clean. Avoid
the #1cause of fiber link failure: dirty end-faces. Includes cleaning cube,
10 cleaning cards, solvent pen, port cleaning swabs and soft carry case.
KIT CONTENTS AT A GLANCE
FiberInspector Pro Video Microscope is a portable video microscope that provide superior vision to inspect fiber while it’s
still in place. It works 10 times faster than traditional scopes — saving valuable time inspecting installed fiber
terminations in hardware devices and patch panels. Eliminate the #1 cause of fiber failure: contamination. The displays
provides crisp, clear images of microscopic debris and end-face damage. Simply insert the video probe and inspect
installed fiber connectors through the bulkhead adapters without accessing the backside of the patch panels.
Mfg. part no. FT600 includes 250/400x dual magnification probe, display with 3.5″ screen, AC adapter/battery charger,
probe adapter tips (ST, SC, FC and universal 2.5mm patch cord tip) and hard carrying case.
Mfg. Part No.
SimpliFiber™ Power Meter
SimpliFiber™ Sources
850nm and 1300nm
SimpliFiber™ Sources
1310nm and 1550nm
VisiFault™ Visual Fault Locator
FT120 200X Fiber Viewer
FiberInspector Mini Video
Viewer
CableIQ™ Advanced IT Kit
Carrying Case
for protection and easy transport
Mfg. Part No.
FTK150
FT525
Description
Basic Fiber Verification Test Kit
Fiber Inspector Mini and cleaning kit
Mfg. Part No.
Description
FiberInspector Pro
FT600
OFTM-5352 FiberInspector Pro for OptiFiber Certfying OTDR
FiberInspector E2000 Video Probe Adapter Tip
NF366
FTK-150
●
●
(83017)
CableIQ™ QUALIFICATION TESTER, KITS
AND ACCESSORIES
●
Stock No.
76K2754
62M4288
Price Each
1695.00
1670.00
(87530)
OPTIFIBER™ CERTIFYING OTDR
• Boost productivity with an easy-to-use interface and small,
lightweight design
• Diagnose fiber cabling issues with integrated ChannelMap™,
auto OTDR and fiber end-face inspection
• Certify fiber with integrated Auto OTDR analysis, automated
loss and length measurements and fiber end-face inspection
• Enhance visibility into premise, campus and metro networks
with short event dead zones
• Document fiber with LinkWare PC data management and
reporting software
OptiFiber™ Professional OTDR gives private network owners the visibility
into fiber network to quickly isolate faults, restore network performance
and meet the emerging requirements for fiber testing and certification. In
addition, OptiFiber™ integrates loss and fiber length measurement, OTDR
analysis,and fiber connector end-face imaging to provide extended certification and diagnostics. The companion LinkWare PC software documents,
reports and manages all test data.
OptiFiber™ has several models to choose from. All come with a mainframe, battery, carrying strap, AC power supply,
USB cable, 32MB MMC card, compact disk with quick reference guide, manuals, LinkWare management software and
62.5um launch fiber cable.
Mfg. Part No.
Description
Stock No.
OF-500-01/50M OptiFiber Multimode OTDR (50um Accessories)
OF-500-02/50M OptiFiber Advanced Multimode OTDR (50um Accessories)
OptiFiber Singlemode OTDR
OF-500-03
OptiFiber Certifying Multimode OTDR
OF-500-10
OF-500-10/50M OptiFiber Certifying Multimode OTDR (50um Accessories)
OptiFiber Singlemode SR Certifying OTDR
OF-500-13
OptiFiber SR Certifying OTDR
OF-500-15
OF-500-15/50M OptiFiber SR Certifying OTDR (50um Accessories)
OptiFiber Pro Inspector LL OTDR
OF-500-35
OF-500-35/50M OptiFiber MM/SM Pro Inspector LL OTDR (50um and SM
Accessories)
OptiFiber MM/SM Certifying OTDR
OF-500-45
Price
85K1327
13995.00
85K1328
17M8965
87H9533
85K1329
18M6177
21J6262
85K1330
21J6263
85K1331
14995.00
12760.00
19995.00
19995.00
23351.00
24990.00
24990.00
30795.00
30795.00
18M6178
39126.00
SMART REMOTE MODULES
Mfg. part no. OFSR-MMREM OptiFiber™ smart remote with multimode module package is used with the OptiFiber™
mainframe to cerify multimode fiber using standards-based two fiber, dual wavelength DTX fiber module methodology.
Mfg. part no. OFSR-SFM singlemode module for smart remote is used with the OptiFiber™ smart remote to certify
singlemode fiber using standards-based two fiber, dual wavelength DTX fiber module methodology. Mfg. part no.
OFSR-MFM multimode module for smart remote is used with the OptiFiber™ smart remote to certifiy multimode fiber
using standards-based two fiber, dual wavelength DTX fiber module methodology.
Mfg. Part No.
OFSR-MMREM
OFSR-SFM
OFSR-MFM
Stock No. Price Each
56J8960
3495.00
41J2293
2495.00
21J6271
567.00
Description
Smart Remote with Multimode Module Package, USB, Mini
B Connector
Singlemode Module for Smart Remote
Multimode Module for Smart Remote
• Qualifies — sees if existing cabling has the bandwidth to support voice, 10/
100, VoIP or gigabit Ethernet
• Troubleshoots — shows why existing cabling cannot support the network’s
bandwidth requirement (e.g. crosstalk at 11 meters)
• Discovers — detects what’s at the end of any cable and displays device
configuration (Speed/Duplex/Pairing)
• Identifies unused switch ports that can be reallocated
• Graphically maps wiring configuration and shows distance to faults with
intelligent wiremap
• Tests all copper cabling media: twisted-pair, coax, and audio cable
Mfg. part no. CIQ-100 CableIQ™ qualification tester is designed to meet the emerging needs of
network technicians who need to upgrade to higher network speeds and troubleshoot connectivity problems. It allows network technicians to perform a series of troubleshooting steps to better
isolate cabling from network problems and identifies whether insufficient cabling bandwidth is
the cause of the problem. Supports UTP, STP, FTP, SSTP, RG6, RG59, audio and security type
cable. Supported tests include wiremap, length, cable signal performance, digital and analog
toner, Ethernet port detection and ID, analog phone and video signal detection, continuity, and
cable fault finding. Measures crosstalk and impedance and compares against appropriate limits
based on qualification test selected. Tester stores up to 250 qualification test results.
CableIQ™ TESTER AND KITS
Mfg. part no. CIQ-100 CableIQ™ qualification tester comes complete with remote adapter, CableIQ™ Reporter
software CD, two RJ-45-RJ45 patch cords, USB cable, coax ″F″ push-on adapter, CD and user guides, softside carrying
case and four AA batteries.
Mfg. Part No.
Description
Stock No.
Price Each
CableIQ Qualification Tester
73J6912
1075.00
CIQ-100
Mfg. part no. CIQ-Kit advanced IT kit includes CableIQ™ qualification tester with remote adapter, CableIQ™ Reporter
software CD, Intellitone 200 digital probe, 6 remote office ID’s, (2) RJ-45-RJ45 patch cords, USB cable, coax ″F″
push-on adapter, 75-ohm coax patch cord, RJ45/11 universal coupler, CD and user guides, test accessory soft pouch,
hardside carrying case, and (4) AA batteries.
CableIQ Advanced IT Kit
73J6909
1625.00
CIQ-KIT
Mfg. part no. CIQ-KRQ residential qualifier kit includes CableIQ™ qualification tester, (2) RJ-45 patch cords, (2) RJ11
patch cords, USB and coax cable, bare wire and speaker wire adapters, coax BNC and RCA adapters, pack of 50
″Qualified″ labels, CD and user guides, softside carrying case, and (4) AA batteries.
CableIQ Residential Qualifier Kit
44K0059
1175.00
CIQ-KRQ
Mfg. part no. CIQ-SVC service kit includes CableIQ qualification tester with remote adapter, LinkRunner Network
Multimeter, IntellTone 200 Probe, six remote office IDs, rugged carrying case and all needed batteries.
CableIQ Service Kit
17M9683
2025.00
CIQ-SVC
Mfg. part no. CIQ-GSV includes CableIQ Qualification Tester with remote adapter, LinkRunner Pro Network Multimeter,
IntelliTone 200 Probe, six remote cable IDs, rugged carrying case, and all needed batteries
CableIQ Gigabit Service Kit
50M3437
2475.00
CIQ-GSV
CableIQ™ ACCESSORIES
Mfg. part no. C1Q-Coax CableIQ™ coax adapter kit includes F, BNC, and RCA connectors.
CableIQ Remote Identifier Kit, Numbers 2-4
CableIQ Remote Identifier Kit, Numbers 5-7
CableIQ Coax Adapter Kit
CableIQ Speaker Wire Adapter
CableIQ RJ45/11 Modular Adapter
CableIQ ″Qualified″ Labels , Pkg. of 50
CableIQ Hardside Carrying Case
CIQ-IDK24
CIQ-IDK57
CIQ-COAX
CIQ-SPKR
CIQ-RJA
CIQ-QL
CIQ-CIT
73J6907
73J6908
73J6906
73J6911
73J6910
44K0060
73J6905
235.00
235.00
19.95
54.95
44.95
6.95
79.00
(83782)
Stock No. Price Each
21J6276
4995.00
21J6278
21J6279
2995.00
1995.00
(74094)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2223))
C-2223
M-2223
Y-2223
B-2223
USEXP1-2223
2223
9
ND3% BASE1
XXXX3824-2224-1-Page 2224 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:22 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
LAN TESTERS
NETTOOL™ SERIES II NETWORK
TESTERS AND ACCESSORIES
NETWORK
TECHNICIAN TOOL
KITS
• Maximize value when purchasing a DTX CableAnalyzer™
and EtherScope™ together in a kit!
• Install, validate and troubleshoot LANs fast
• Get two of the best in class solutions for cable certification
and Ethernet performance assessment
• DTX-1800 CableAnalyzer™ reduces the total time to certify
network cabling
• EtherScope™ Series II Network Assistant reduces the time
to measure Ethernet performance and validate LAN services
Pro technician kit includes both mfg. part no. DTX-1800-M and mfg. part no. ES2-PRO-SX/I-KIT plus everything
needed for copper and fiber cable certification, Ethernet performance assessment, and wired and wireless LAN
troubleshooting. Handles 10Mbps-to-10Gig copper cable certification, multimode fiber certification (Tier I), 10/100/Gig
Ethernet troubleshooting, 802.11 wireless LAN troubleshooting, Gigabit Ethernet performance measurement with
LinkRunner™ Pro Reflector and service performance assessment. The DTX-1800M includes DTX-1800 CableAnalyze™ with a set of DTX-MFM2 multimode fiber modules, and user manual. The EtherScope™ Series II Network
Assistant PRO-SX/I-KIT includes mainframe with LAN option, 802.11a/b/g adapter with WLAN option, SX SFP with fiber
option, ITO/RFC2544 option, external directional antenna, rechargeable Li-Ion battery pack (installed), protective holster,
carrying strap, carrying case, AC adapter/battery charger, wire map remote, RJ-45 coupler, patch cable, 128MB
CompactFlash® card and resource CD, and LinkRunner™ Pro with Reflector, Li-Ion battery, AC adapter/battery charger,
and carrying case.
Mfg. Part No.
Description
Stock No. Price Each
73P9500 23215.35
ES2-DTX-PRO-KIT Pro Technician Tool Kit — DTX-1800-M and ES2-PROSX/I-KIT
LAN technician kit includes both the mfg. part no. DTX-1800 and mfg. part no. ES2-LAN-SX plus all the basics for
copper cable certification and wired LAN troubleshooting. Handles 10Mbps-to-10Gig copper cable certification and
10/100/Gig Ethernet troubleshooting. The DTX-1800 CableAnalyzer™ includes main and smart remote, LinkWare PC
software, 128MB MMC card, Cat 6A/Class EA permanent link adapters, Cat 6/Class E channel adapters, headsets for
talk, AC chargers, carrying case, USB iInterface cable (Mini-B), Serial RS-232 cable (DB9 to IEEE1394), and user manual.
The EtherScope™ Series II Network Assistant LAN-SX includes mainframe with LAN option, SX SFP with fiber option,
rechargeable Li-Ion battery pack (installed), protective holster, carrying strap, carrying case, AC adapter/battery charger,
wire map remote, RJ-45 coupler, patch cable, 128 MB CompactFlash® card and resource CD.
Mfg. Part No.
Description
Stock No. Price Each
ES2-DTX-LAN-KIT LAN Technician Tool Kit — DTX-1800 and ES2-LAN-SX 73P9499 15474.00
(145371)
LINKRUNNER™ NETWORK MULTIMETER,
KIT AND ACCESSORIES
Mfg part nos. LRPRO-1000 and LINKRUNNER Network Multimeters are
the essential tools to quickly verify and troubleshoot network drops. Mfg.
part no. LR-KDW includes the LinkRunner Network Multimeter as well as
Key Device Watch software to monitor networks and alert user of failures,
reports and network maps. Mfg. part no. LINKRUNNER-KIT extended test
kit includes: LinkRunner™ Network Multimeter, cable ID kit (#1-8),
wiremap adapter, RJ-45 coupler, IntelliTone 100 probe, test clip set, NiMH
battery pack, NiMH battery charger, custom carrying case, and PC Inspector. Mfg. part no. LRPRO-KIT includes LinkRunner Pro, IntelliTone Pro 200
Probe, WireView Cable IDs #1-6, CLIP-SET RJ45 to 8-alligator-clip bare
wire adapter, LinkRunner Connect software CD, test accessory soft pouch,
USB cable, LinkRunner Pro Getting Started Guide, IntelliTone Pro Getting
Started Guide, 4 AA alkaline batteries, one 9V alkaline battery, carry case.
Features
Link/Ping Speed
POTS/ISDN/Ethernet Detection
Cable Wiremap
Discovery Protocols
IntelliTone Digital Toning
PoE Verification
Configurable Ping List
802.1X Authentication
Link Status Reports
USB Application Port
Protective Rubber Mold
9
Mfg. Part No.
LRPRO-1000
LINKRUNNER
LINKRUNNER-KIT
LRPRO-KIT
• NetProve™ diagnostics – isolate device and application
connectivity issues in seconds
• Quickly resolve and document network problems with powerful
inline visibility into 10/100/Gig links between switches, PCs, IP
phones and other devices
• Connect inline for visibility into VoIP calls to quickly diagnose IP
phone boot-up and call control problems and to measure key
call quality metrics
• Verify readiness of PoE systems and troubleshoot PoE device
problems
• IntelliTone™ digital cable location and isolation technology
speeds cable troubleshooting
NETTOOL™ SERIES II NETWORK TESTERS
Mfg. Part No.
NTS2-VOIP
NT
10/100 Single-Ended Testing
NTS2-PRO
18M6174
2495.00
27K6765
1995.00
18C2600
995.00
18M6176
595.00
NETTOOL™ SERIES II UPGRADE
NTS2-VOIP-OPT VoIP Option to Upgrade NTS2-PRO to NTS2-VOIP
(61370)
ETHERSCOPE™ SERIES II NETWORK
ASSISTANT LAN ANALYZERS
• Analyze 10/100/Gigabit twisted pair and Gigabit fiber optic
Ethernet LANs
• Troubleshoot performance and connection issues
• Monitor traffic statistics
• Measure throughput, latency and frame loss per RFC 2544 at
rates up to 1 Gbps over copper or optical fiber cabling
• Analyze 802.11a/b/g wireless LANs
• Secure your WLAN by identifying and locating unauthorized
rogue devices
EtherScope™ Series II Analyzers are the essential toolkits for first responders. They combine the right troubleshooting
tools in a handheld platform to help network professionals solve a wide range of problems fast. Features include
troubleshooting switched networks, characterizing the performance of LAN and WAN links, and discovering access
points, devices, mobile clients, networks and VLANs.
Mfg. Part No.
ES2-LAN-SX/I
ES2-PRO-SX/I
Description
EtherScope S2 LAN Analyzer with SX Fiber and ITO
EtherScope S2 LAN and Wireless LAN Analyzer, SX Fiber
and ITO
ES2-PRO-SX/I-AA EtherScope S2 LAN and Wireless LAN Analyzer, SX Fiber,
ITO and AnalyzeAir Software
ES2-PRO-SXLX-I/S EtherScope S2 LAN and Wireless LAN Analyzer, SX abnd
LX Fiber, ITO and ES-ACCY KIT*
LRPRO-1000
LinkRunner
10/100
LinkRunner Pro
10/100/1000
●
●
●
●
CPD/EPD
CPD/EPD/LLPD
ES2-SX
●
ES2-LX
10 IP Addresses
●
ES2-ZX
●
ES-ACCY-KIT*
DSP-FTK
●
●
Description
LinkRunner Pro Network Multimeter
LinkRunner Network Multimeter
LinkRunner Network Multimeter Extended Test Kit
LinkRunner Pro Extended Test Kit
Stock No.
43M0075
76C0203
76C0204
50M4150
NiMH Battery Charger, 1.25A
Rechargable AA NiMH Battery Pack
Holster Storage Case
18C2620
18C2610
44K0061
Stock No. Price Each
05M6677
9995.00
30M8899 10900.00
30M8900
12995.00
18M6111
10995.00
18M6114
199.00
ACCESSORIES
●
Price
999.00
450.00
895.00
1499.00
ES-BATTERY
ES-BATT-CHG
WIREVIEW 2-6
OPVS2-KB
ES-WCARD
DTX-ACUN
OPV-POE
MT-8200-63A
MT-8200-53A
944806
LINKRUNNER™ ACCESSORIES
NT-BATT-CHG
BATT-AA-NIMH
LR-HOLSTER
Stock No. Price Each
18M6175
2995.00
NT-VOIP
Description
10/100/1000 Inline Testing, VoIP Application, NetProve,
PoE, IntelliTone Toning, Reporter
10/100/1000 Inline Testing, NetProve, PoE, IntelliTone
Toning, Reporter
10/100 Inline Testing, VoIP Application, Reporter
62.00
15.00
20.00
(74095)
SX Gig Fiber SFP Transceiver (850nm VCSEL,
Replacement Item)
LX Gig Fiber SFP Transceiver (1310nm FP Laser, SX
Fiber Option Required)
ZX Gig Fiber SFP Transceiver (1550nm DFB Laser, SX
Fiber Option Required)
Etherscope S2 Accessories Kit
Fiber Optic Test Kit, 850nm and 1300nm LED Source,
and 850/1300/1550 nm Meter
Replacement Battery
External Battery Charger
Remote Identifiers 2-6
Mini USB Keyboard
Replacement WLAN Card (Hardware Only)
Universal AC Charger
Power Over Ethernet Adapter
IntelliTone Pro 200 Probe
IntelliTone Pro 100 Probe
Null Modem Cable (DB9)
18M6109
399.00
18M6116
2295.00
62K4573
16F9098
895.00
1249.00
56J8958
56J8957
62K5705
33K4161
62K4583
40K6052
29K6247
92H6887
92H6884
45M5783
350.00
195.00
315.00
125.00
395.00
50.00
68.00
104.00
83.00
13.97
*Mfg. part no. ES-ACCY-KIT contains an EtherScope battery, external battery charger, AC charger and line cord,
USB mini keyboard, WireView identifiers #2 - #6 and a larger carrying case.
(83015)
(148886)
2224
STIBOINFO((NEWARK_MAIN_C124_2224))
C-2224
M-2224
Y-2224
B-2224
USEXP1-2224
ND3% BASE1
XXXX3825-2225-1-Page 2225 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:22 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
POWER QUALITY ANALYZERS
FLUKE-345 POWER
QUALITY CLAMP METER
FLUKE-430 SERIES THREE-PHASE POWER QUALITY ANALYZERS (CONT.)
•
•
•
•
•
•
•
• Clamp-on measurement without breaking the circuit
• Accurate in noisy environments even with distorted waveforms
• Datalogging power parameters for minutes or months
• Troubleshoot, analyze and log harmonics digitally or graphically
• Capture and analyze nuisance tripping, from 3 to 300 seconds
• 3-Phase power — built-in capability for balanced loads
• View graphs and generate reports with Power Log software
• 600V CAT IV safety rating, CSA certified, CE compliant
Mfg. part no. FLUKE-345 power quality clamp meter features a bright, color LCD display
with 2-level backlight to analyze the harmonic spectrum, a low-pass filter to remove high
frequency noise, and a high EMC immunity design. Ideal for commissioning, troubleshooting and measuring modern electrical switching loads, such as variable frequency
drives, electronic lighting and UPS systems. Additionally, the Hall Effect measurement
system makes measurement of DC current possible without the need to break the circuit,
and the internal memory enables long-term datalogging for analysis of trends or
intermittent problems. Meter comes complete with Power Log software, test leads and
probes, alligator clips, USB cable, international AC adapter/battery eliminator, soft
carrying case, printed user manual and multi-language manual on CD .
SPECIFICATIONS
Current Measuring Range
Voltage Measuring Range
Watts Measuring Range (Single- and Three-Phase)
VA Measuring Range (Single- and Three-Phase)
VAR Measuring Range (Single- and Three-Phase)
Frequency (From Current or Voltage Sources)
Jaw Opening/Capacity
Overall Size
Mfg. Part No.
FLUKE-345
In Addition — Only Fluke-435 Features:
• Fully Class A Compliant — conduct tests according to the stringent international IEC 61000-4-30 Class A
standard
• Logger function — configure for any test condition with memory for over 400 parameters at user defined
intervals
• Mains signaling — measure interference from ripple control signals at specific frequencies
0 to 2000A DC or 1400 AC rms
0 to 825V DC or AC rms
0 to 1650kW DC or 1200kW AC
0 to 1650kVA DC or 1200kVA AC
0 to 1250kVAR
15Hz to 1kHz
2.36″/2.28″ Dia.
12L x 3.75W x 2″H
Description
Power Quality Clamp Meter
Stock No.
30M9566
Price Each
1707.00
(90371)
FLUKE VR1710 VOLTAGE QUALITY RECORDER
• Fast and easy recording of voltage trends, dropouts, and power
quality
• Easy to use
• Continuous recording of all values with no gaps
• Clear graphical summary of data and quick overview of key
power quality parameters
• Min, Max, Average RMS values (1/4 cycle) with time stamps
• Actual transient display (>100 µs) with time stamp
• Flicker according to EN 61000-4-15, individual harmonic and
THD values with trends
• Statistical analysis of voltage event
• Includes PowerLog software package for quick download,
analysis, and automatic reporting
Frequency Range
Harmonics Measurement
Mfg. Part No.
VR1710
COMPARISION AT A GLANCE:
Mfg. Part Nos.
Fully Class A Compliant
Report Generation and Logger
Analysis Software Power Log
Logger Function with
Multi-Parameter Logging,
Mains Signaling
Mains Signaling
Voltage Accuracy
Memory
Current Probes
Carrying Case
GPS Time Synchronization
Fluke-434*
Fluke-435
●
●
*To Add These Three Features
Order Fluke-434/LOG Upgrade Kit
separately below
●
●
0.5% of nominal
8Mb
40A/400A Clamp (Four)
Rugged Hard Case
When used with
Mfg. Part No. GPS430 Module;
order separately below
Class A - 0.1% of nominal
4000A Flexible (Four)
Watertight Hard Case with Rollers
When used with
Mfg. Part No. GPS430 Module;
order separately below
Stock No. Price Each
56J9491
5212.00
83K1732
7293.00
ACCESSORIES
Fluke VR1710
70V to 300V
Resolution 0.125
175,000
0.125V
EN 610000-4-7 (up to 32nd)
1 Phase to Neutral
2 Phase/Neutral to Ground
50 Hz ± 1 Hz and 60 Hz ± 1 Hz
Cat II 300V
Description
VR1710 Plug-in Voltage Quality Recorder
Stock No.
64M6536
Price Each
779.00
(103578)
FLUKE-430 SERIES THREEPHASE POWER QUALITY
ANALYZERS
FLUKE-434/003
Mfg. part nos. Fluke-434 and Fluke-435 three-phase power quality analyzers help locate, predict, prevent and
troubleshoot problems in three- and single-phase power distribution systems. Troubleshooting is faster with on-screen
display of trends and captured events, even while background recording continues. Measures voltage, current, dips,
swells, interruptions, harmonics, inter-harmonics, flicker, power, energy, transients, frequency, unbalance, inrush,
EN50160 overview. The new IEC standards for flicker, harmonics and power quality are built right in to take the guess
work out of power quality. Both models include USB cable, color localization set, FlukeView® analysis software, five test
leads (four black, one green), five test clips (four black, one green), current probes, NiMH battery pack and charger, hard
carrying case, user manual CD, and printed ″getting-started″ manual.
Mfg. Part No.
Description
FLUKE-434/003 Power Quality Analyzer, Three-Phase
FLUKE-435/003 Logging Power Quality Analyzer, Three-Phase
Mfg. part no. Flule VR1710 is a single-phase, plug-in voltage quality recorder for detecting and recording voltage
quality problems. Voltage quality parameters including RMS average, transients, flicker, and harmonics up to the 32nd
are recorded using a user-selected average period from 3 seconds to 10 minutes.The Fluke VR1710 satisfies the needs
of maintenance and facilities management personnel in industrial, utilities, and large service organizations where
reliable voltage quality is essential.
Specifications
Operating Volage
MIN/MAX/AVG RMS value
Number of Events
Voltage Resolution
Harmonics Measurement
Number of Recording Channels
Measure all three phases and neutral with included four current probes
AutoTrend: every measurement is always automatically recorded, without any setup
System-Monitor: Up to seven power quality parameters on one screen according to EN50160
Inrush mode for troubleshooting nuisance circuit breaker tripping
Rugged, hand-held troubleshooter with three- year manufacturer’s warranty
Seven hours operating time per charge on NiMH battery pack
View graphs and generate reports with included analysis software
C435
GPS430
FLUKE-434/LOG
I430-FLEX
I5SPQ3
TLS430
Watertight Hard Storage Case with Rollers
GPS Time Synchronization Module
Firmware/Software Upgrade Kit
3000A Flexible Current Probe; Sold Individually
5A AC Current Clamp
Replacement Test Leads
83K1711
83K1734
83K1731
83K1735
43K8758
56J9494
432.00
1150.00
1654.00
358.10
997.85
93.60
(82913)
FLUKE-43B
POWER QUALITY
ANALYZER
Mfg. part no. FLUKE-43B power quality analyzer performs the measurements you need to maintain power systems,
troubleshoot power problems and diagnose equipment failures. Combines capabilities of a power quality analyzer,
multimeter and scope. Calculates 3-phase power on balanced loads, from a single-phase measurement. Measures
power harmonics, captures voltage sags, transients and inrush current. Monitoring functions help track intermittent
problems. Single keystroke toggle for most commonly-used power quality modes . Records 2 selectable parameters for
up to 16 days. Flukeview software provides a complete harmonic profile up to 51st harmonic. Measures resistance,
diode voltage drop, continuity, and capacitance. Includes voltage probes, 500A current clamp, Flukeview™ software
and optically isolated interface cable. 3-year manufacturer’s warranty on the FLUKE-43B analyzer, 1-year manufacturer’s warranty on accessories. Order mfg. part no. 1400S AC current clamp separately below.
SPECIFICATIONS
Volts/Amps/Hertz
True-Rms Voltage: (AC + DC)
5.0V to 1240V*
True-RMs Current: (AC + DC)
50.00 to 1250KA
Frequency: 10.0Hz to 15.0KHz
Power Display
Watts, VA, VAR Reactive Power
1-Phase and 3-Phase, on
Balanced Loads:
250W to 1.56 GW
PF Power Factor: 0.00 to 1.0
DPF Displacement Power Factor:
0.00 to 0.25
FLUKE-435/003
Transients
Minimum Pulse Width: 40ns
Voltage Threshold Settings: 20%, 50%,
100%, 200%
Inrush Current
Current Ranges (Selectable):
1A to 1000A
Inrush Times (Selectable):
1sec. to 5 min.
Both Models Feature:
• Troubleshoot real-time: Analyze the trends using the cursors and zoom tools — even while background
recording continues
• Highest safety rating in the industry — 600V Cat IV / 1000V CAT III
• Automatic transient mode captures 200kHz waveform data on all phases simultaneously — up to 6kV
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2225))
C-2225
M-2225
Y-2225
B-2225
USEXP1-2225
2225
9
ND3% BASE1
XXXX3826-2226-1-Page 2226 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:22 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
POWER QUALITY ANALYZERS
FLUKE-43B POWER QUALITY ANALYZER (CONT.)
Volts/Amps/Hertz
Volts, Amps, Watts: 2 to 51st
Harmonic Phase: 2nd (±3°)
. . . 51st (±15°)
FLUKE-1740 SERIES POWER QUALITY LOGGERS-MEMOBOX (CONT.)
Transients
Input Impedance: 1MΩ
Bandwidth Input: 1 (Voltage):
DC to 20 MHZ
TimeBase: 60 s/div to 20 ns/div
Sampling Rate: 25MS/s
DMM
Resistance: 500.0Ω to 30.00 MΩ
Capacitance: 50.00nF, to 500.0µF
Temperature:** -100.0°C to 400.0°C
General
Rated: 600Vrms Category III
Surge Protection: 6KV on
Input 1 and 2
Floating Measurements: 600Vrms
From Any Terminal to Ground
COMPARISON AT A GLANCE:
Mfg. Part Nos.
Logs Voltage, Current, Dips, Swells,
Interruptions, Voltage Harmonics,
Power Energy
Logs Current Harmonics,
Interharmonics, Flicker, Frequency
Dust/Water Resistance
Display
UPS
Memory
*Rated 600V CAT III, **Requires Optional Temperature Accessory
Mfg. Part No.
FLUKE-43B/003
I400S
Description
Power Quality Analyzer
AC Current Clamp
Stock No.
31C1557
56J9493
Mfg. Part No.
FLUKE-1743
FLUKE-1744
FLUKE-1745
Price Each
2762.00
218.95
(68961)
FLUKE-1743
FLUKE-1744
FLUKE-1745
●
●
●
●
●
IP65
LEDs
1s
4MB
IP65
LEDs
1s
4MB
IP50
LEDs + LCD
>5 hrs.
8MB
Description
60Hz Power Quality Logger-Memobox
60Hz Power Quality Logger-Memobox
60Hz Power Quality Logger-Memobox
Stock No. Price Each
83K1728
4295.00
83K1729
5395.00
83K1730
6495.00
ACCESSORIES
MBX CLAW-GRIP Safety Claw-Grip Test Lead with
Built-in 2A Fuse
MBX USB-RS232 USB-to-Serial (DB-9 Male)
MBX USB-RS232
Converter
MBX 300 POLESET Pole Mounting Kit — Incl. One
MBX 300 POLESET
Plate, One Strap — Incl. One Plate, One Strap
I20A/200A CLAMP PQ4 Clamp PQ3 3-Phase 1A/10A
Clamp PQ3 3-Phase 1A/10A
I5A/50A CLAMP PQ4
Clamp PQ3 3-Phase 1A/10A
I1A/10A CLAMP PQ4
Clamp PQ3 3-Phase 1A/10A
I5A/50A CLAMP PQ3
Clamp PQ3 3-Phase 1A/10A
I1A/10A CLAMP PQ3
36 in. Flexi Probe 4 Phase
3000/6000A FLEX 4
MBX CLAW-GRIP
FLUKE-1735 POWER
LOGGER-ANALYST
• Record loading according to NEC 30-day load study requirement
• Monitor demand at 15 minute or user-defined averaging periods
• Prove the benefit of efficiency improvements with energy
consumption tests
• Measure harmonic distortion caused by electronic loads
• Improve reliability by capturing voltage dips and swells from load
switching
• Easily confirm instrument setup with color display of waveforms
and trends
• Measure all three phases and neutral with included 4 flexible
current probes
• View graphs and generate reports with included Power Log
software
• Compact, rugged design with IP65 case
• Rated 600V CAT III
• 2-year manufacturer’s warranty
95.00
66K7488
41.00
66K7491
39.00
46P4452
58M2823
58M2824
71M4066
71M4064
72M5141
649.00
649.00
649.00
495.00
495.00
1658.00
(88085)
FLUKE 1750 3-PHASE POWER
QUALITY RECORDER
Fluke 1735 Power Logger-Analyst is the ideal electrician’s tool for conducting load studies according to National Electric
Code 220.65. Sets up in seconds with the included flexible current probes and color display. Logs most electrical
parameters and harmonics as well as capturing voltage events. Includes soft carrying case, 4 flexible current probes
(15A/150A/3000A), Power Log software, voltage leads and clips, color localization set, PC interface cable , universal AC
adapter, printed English manual, and multi-language manual CD.
Mfg. Part No.
FLUKE-1735
66K7479
Description
Stock No. Price Each
83K1727
2842.00
Power Logger-Analyst
ACCESSORIES
MBX CLAW-GRIP Safety Claw-Grip Test Lead with
Built-in 2A Fuse
MBX USB-RS232 MBX USB-RS232 USB-to-Serial (DB-9 Male) Converter
MBX 300 POLESET MBX 300 POLESET Pole Mounting Kit — Incl. One Plate,
One Strap
MBX CLAW-GRIP
66K7479
95.00
66K7488
66K7491
41.00
39.00
(88084)
• Premium accuracy and measurement techniques:
Guaranteed for all power quality parameters, with IEC
61000-4-30 Class A measurement systems
• Quick and reliable configuration: PDA wireless “front panel
interface” provides a window into what the instrument is
recording, enabling quick and reliable configuration even in
awkward test locations
• Threshold-free set up: Apply thresholds after data is
collected with Fluke Power Analyze Software
• Captures everything: Cross-channel and current triggering
capture every measurement, on every channel, every time
• Intuitive PC software: Easily analyze data and generate
reports
• Plug and play: Set up in minutes with self-identifying
current probes and single-lead voltage connections
• No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are
not correct
• Measure every parameter: Voltage and current on three phases, neutral, and ground
• 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events
• Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection
FLUKE-1740 SERIES POWER
QUALITY LOGGERS-MEMOBOX
Mfg. Part No.
FLUKE-1750
Description
3-Phase Power Quality Recorder
Stock No.
23M4644
Price Each
11485.00
(94364)
POWER QUALITY
RECORDER KITS
9
FLUKE-1743, FLUKE-1744
FLUKE-1745
• Measure all three phases and neutral with included 4 flexible current probes
• No power supply or batteries required – logger and current probes are powered from voltage inputs
• Accurately validate system performance with IEC 61000-4-30 class A voltage accuracy (0.1% of VI) and
EN50160 overview
• Trend recorded data, generate reports, and monitor real-time with included PQ Log software
• Set up in minutes with the self-identifying current probes and single lead voltage connections
• Assess severity of power quality problems by capturing up to 13.000 dips, swells, or interruptions
• 600 V CAT III
• 2-year manufacturer’s warranty
Fluke 1740 series power quality loggers-memobox are the power quality technician’s everyday instrument. Capable of
logging over 500 parameters for up to 85 days, these power quality loggers help uncover intermittent and hard-to-find
issues. The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the
load according to the latest EN50160 standard. All three logger models include a soft carrying case, four flexible current
probes (15A/150A/1500A /3000A), PQ Log software, voltage test leads and clips, color localization kit, PC interface
cable, international plug adapters, printed English manual, and multi-language manual CD.
• True RMS (TRMS)
• Works with single and three phase
systems (Y and Delta)
• Records up to 64 parameters (single or
three phase) simultaneously
• Megohmmeter functions: selectable test
voltages up to 1000V
• Ground resistance and resistivity
functions:three measuring modes
• Phase sequence indication
Mfg. part nos. DM-III Multitest and DM-III Multitest F measure and record a broad spectrum of power quality
parameters: AC current, AC voltage to 600V including sags and surges, harmonics (THD and individual up to 49th),
active, reactive and apparent power and energy, peak demand, power factor, frequency measurement and phase
sequence. Both are compatible with a wide range of current transducers, DM-CT-HTA supplied with DM-III Multitest
and AM-FLEX33 supplied with DM-III Multitest F. Kits include: CTs, voltage leads, ground probes and leads, PC software
and download cable.
SPECIFICATIONS
Supplied Current Transducer
AC Current
AC Voltage
Including Sags and Surges
DM-CT-HTA 1000A Standard CT 2”
internal diameter CT +/-(0.5% Rdg + 2 LSD
DM-CT-100:0.5A to 100A / DM-CT-HTA:5 - 1000A /AM-FLEX33:
Selectable: 5 – 1000A or 15 - 3000A +/-(0.5% Rdg + 2 LSD)
0 - 600V +/-(0.5% Rdg + 2 LSD
2226
STIBOINFO((NEWARK_MAIN_C124_2226))
C-2226
M-2226
Y-2226
B-2226
USEXP1-2226
ND3% BASE1
XXXX3827-2227-1-Page 2227 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:22 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
POWER QUALITY ANALYZERS
POWER QUALITY RECORDER KITS (CONT.)
Harmonics
Power
Selectable Fundamental Frequencies
Safety
Mfg. Part No.
DM-III MULTITEST
DM-III MULTITEST F
THD, DC and individual up to 49th +/-(0.5% Rdg + 2 LSD)
Working (W), Reactive (VAR) and
Apparent (VA) +/-(1.0% Rdg + 2 LSD
50/60 Hz
CATIII, 600V Phase to phase,
CATIII, 300V Phase to ground, EN 61010-1+A2(1996)
Description
PQ Recorder with Standard Current Clamps
PQ Recorder with Flexible Current Clamps
Stock No.
66K6290
66K6291
Price Each
3495.00
3495.00
(147137)
POWER QUALITY
RECORDER
Designed for the busy electrician, the PowerVisa® 440D delivers an easy to setup, easy to navigate color graphical touch
screen interface with the advanced horsepower you expect from a Dranetz-BMI power monitor. The PowerVisa®
provides the user with unique tools, such as the Dranetz-BMI annunciator “report card” panel to help users that are new
to power quality monitoring successfully collect meaningful data each time they use the instrument. The annunciator
collects, analyzes and tabulates data on screen in color-coded categories to immediately identify areas of concern
(which are identified in red). The user can drill down for more detailed information by simply touching the intuitive touch
screen to troubleshoot problems and locate the source. Automated setup, pre-programmed application modes,
real-time scope and meter data, detailed event characterization of RMS variations and transients, and waveform capture
are viewed on screen in real time, while being saved to a removable memory card.Mfg. part nos. PV101, PV102 and
PV103 all contain flash memory card, soft carrying case, battery charger, voltage cable set with pouch, and user guide.
Mfg. part no. DM-II PLUS is a full-featured three phase power quality
recorder to maintain, diagnose and troubleshoot electrical systems.
User selectable rates allow recording from one hour to several months.
Readings and charts can be viewed on the DM-II LCD screen or
downloaded to a PC. Optional transducers available for 100A and
3000A (flexible) current capability.
Description
Power Quality Recorder
• 8 independent channels collecting data at 256 samples/
cycle/channel
• Meets the most advanced power quality instruments
standards, worldwide
• Icon-based, color touch screen
• Selectable data collection mode
• Selectable data collection length
• Low and medium frequency transient capture
• RS-232, Ethernet, and USB options
• Triggers on voltage and current
• Lightweight and portable
• Comes with industry-leading Dran-View® power quality
analysis software
Applications:
• Troubleshooting power disturbances
• Compliance monitoring (IEEE 1159, IEC 61000-4-30 Class A, and EN50160)
• Energy surveys (energy consumption, peak demand evaluation, etc.)
• Equipment performance testing (evaluating facility power prior to installing new equipment,: checking
whether UPS’s are operating properly.)
• Harmonics, interharmonics, and subharmonics capture and analysis
• AC current up to 1000A, AC voltage, active, reactive, apparent
power, energy, peak demand and power factor
• All readings are True RMS
• 5 built-in selectable languages: English, French, Italian,
German and Spanish
• Works with single and three phase systems (Y & delta)
• Capable of recording all parameters (single or three phase)
simultaneously
Mfg. Part No.
DM-II PLUS
POWERVISA 3-PHASE POWER QUALITY
ANALYZER
Stock No.
05N1460
Price Each
3195.00
(147134)
ADVANCED WIRE TRACER KITS
Mfg. Part No.
Description
PowerVisa 4400 mainframe, DRAN-VIEW (USB hasp version/
PV10
DVPXHASP version), 3 each TR 2510A probes
PowerVisa 4400 mainframe, DRAN-VIEW (USB hasp version/
PV500
DVPXHASP version), 3 each TR 2500A probes
PVFLEX PowerVisa 4400 mainframe, DRAN-VIEW (USB hasp version/
DVPXHASP version), 3 each RR3035A/24 probes, CA4300
Adapter, RR/PS/4P
Stock No. Price Each
59K9504
5550.00
59K9505
5550.00
59K9506
6575.00
(85557)
POWERGUIDE 3-PHASE,
8-CHANNEL POWER MONITOR
AT1000
AT2005
Mfg. part no. AT1000 advanced wire tracer traces energized lines up to 300VAC/DC, unenergized and open
conductors. Identifies breakers and fuses without powering down. Locates shorts, identifies wires in bundles and
identifies control, alarm and telephone system wiring. Receiver range 1 to 3 ft. from cable being traced. Kit includes:
receiver, transmitter, 110V pigtail cordset, 2-pc. alligator clip cordset, adapter, manual and softside carrying case.
Mfg. Part No.
Description
Stock No.
Price Each
Advanced Wire Tracer Kit
16F9054
349.95
AT1000
AT-2000 series advanced wire tracing kits trace live wires buried or hidden behind walls up to 13-ft. deep. Perform
tests without having to interrupt power. Locate breakers, neutral and ground lines. Locate and trace wires in walls,
floors, conduit, computer cable, etc. Pinpoint shorts, ground faults and broken wires. Choose from four upgradeable wire
tracing systems.
Mfg. part no. AT-2001 advanced wire tracer kit includes receiver, 9-300V load signal generator (transmitter), cordset
110V plug-to-banana plugs, one fuse, manual and carrying case.
Advanced Wire Tracer Kit
96F5469
614.86
AT2001
Mfg. part no. AT-2002 advanced wire tracer kit includes: receiver, 9-600V load signal generator (transmitter), cordset
110V plug-to-banana plugs, adapter, one fuse, manual and carrying case.
Advanced Wire Tracer Kit
96F5470
749.95
AT2002
Mfg. part no. AT-2004 advanced wire tracer kit includes: receiver, 9-600V load signal generator (transmitter) ,
transmitter for open tracing, clamp-on attachment, cordset 110V plug-to-banana plugs, cordset alligator clips-tobanana plugs, adapter, two fuses, manual and carrying case.
Advanced Wire Tracer Kit
96F5472
999.95
AT2004
Mfg. part no. AT2005 advanced wire tracer kit includes: receiver, 9-600V load signal generator (transmitter),
transmitter for open tracing, clamp-on attachment, battery booster, charger for battery booster, cordset 110V
plug-to-banana plugs, cordset alligator clips-to-banana plugs, adapter, two fuses, manual and carrying case.
Advanced Wire Tracer Kit
16F334
1099.95
AT2005
AT-4000 CON series advanced wire tracer kits include: receiver, transmitter, 110V pigtail cordset, alligator clip cordset
2pcs., grounding test lead 25ft. with alligator clip, fast acting fuse, manual and carrying case. Additionally, AT4004CON
and AT4005CON kits include a clamp-on attachment and AT4005CON also includes a battery booster and charger.
Advanced Wire Tracer Kit
12M9309
499.95
AT-4001CON
12M9310
649.95
Advanced Wire Tracer Kit
AT-4003CON
87K2031
749.95
Advanced Wire Tracer Kit
AT-4004CON
12M9311
899.95
Advanced Wire Tracer Kit
AT-4005CON
Mfg. part no. CT-326B current tracer traces energized wires and locates breakers without power interruption: 9-300V
AC/DC 300-600VAC. Features 12 sensitivity settings. Locates and traces live wires in walls, floors, conduit, computer
cable buried or hidden behind walls up to 13-ft. deep. Kit includes power cord, adapter, pigtail connectors, earphone,
voltage converter, one fuse, manual and carrying case.
Current Tracer Kit
89F1200
979.95
CT326B
• 8 independent channels collecting data at 256 samples/
cycle/channel
• Meets the most advanced power quality instrument
standards, worldwide
• Icon-based, color touch screen
• Selectable data collection mode
• Selectable data collection length
• Low and medium frequency transient capture
• RS-232, Ethernet, and USB options
• Triggers on voltage and current
• Lightweight and portable
• Comes with industry-leading Dran-View® power quality
analysis software
Applications:
• Fault recording of electrical malfunctions and identification of faults within a facility’s infrastructure
• Inrush evaluation (motors, transformers, breaker trips, etc.)
• Long-term monitoring w/min/max/avg and continuous data logging
• Compliance monitoring (IEEE 1159, IEC 61000-4-30 Class A, and EN50160)
• Power quality surveys, studies and forensic analyses
• Energy surveys (energy consumption, peak demand evaluation, etc.)
• Equipment optimization (provides RMS triggers and peak threshold crossings to optimize the performance
and longevity of essential equipment)
The workhorse, the PowerGuide 4400 lets the user select the length and mode of data collection, simultaneously testing
for power quality, data logging, energy, fault recording, motor health and compliance projects. The PowerGuide 4400
has all the features and capabilities of the PowerVisa, plus several unique attributes such as the Dranetz-BMI patented
AnswerModules®. These are exclusive algorithms that tell users the source, severity and cause (direction) of power
problems. The 4400 includes Sag Directivity, Power Factor Capacitor Switching and Motor Health Annunciator, which
analyzes a range of motor health parameters to provide advanced warning of factors that could impact motor
performance.
Mfg. Part No.
Description
PG106 PowerGuide 4400 Package
CT109 Set of three 2510A CT probes
CT101 Set of three RR3035A/24 Flex CT probes, CA4300LEM Adapter,
RR/PS/4P
Stock No. Price Each
59K9503
7750.00
59K9486
771.00
59K9484
2440.00
(85558)
(5347)
(148881)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2227))
C-2227
M-2227
Y-2227
B-2227
USEXP1-2227
2227
9
ND3% BASE1
XXXX3828-2228-1-Page 2228 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:22 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
POWER QUALITY ANALYZERS • INSULATION & GROUND RESISTANCE TESTERS
PX5 POWER
QUALITY ANALYZER
1550B MEGOHMMETER
• 8 independent channels collecting data at 256 samples/
cycle/channel
• Meets or exceeds worldwide power quality instruments
standards
• Simple to use, icon-based color touch screen
• 1 microsecond per channel sampling (voltage and current
triggers)
• Ability to create individual annunicator “report card” panels
in addition to standard PQ and motor health options
• Lightweight and portable
• RS-232, Ethernet, and USB options
• Comes with industry-leading Dran-View® power quality
analysis software
Applications:
• Power quality surveys and diagnostics, including full event capture, characterization and directionality via
unique AnswerModules.
• Scope-like capture and display of fast transients (as short as 1 microsecond) for capacitor switching, load
shifting, medical diagnostic equipment, et.al.)
• Identification of load distortion and imbalance caused by non-linear loads
• Flicker capture (IEC 61000-4-15) and evaluation
• Compliance monitoring (IEEE 1159, IEC 61000-4-30 Class A, and EN50160)
• Complete harmonics studies, including measurement of current harmonics
For the power expert, the PowerXplorer delivers the most advanced feature set available in a power monitoring
instrument; including high-speed sampling and data capture (1 microsecond/channel and the unique ability to clearly
characterize non-sinusoidal and unbalanced systems, in a user-friendly package).
The PX5 contains all features and capabilities of the PowerGuide 4400, adding the ability to capture transients generated
by fast-switching electronics, medical diagnostic equipment, capacitor switching, lightning, transformer energization
and load shifting. Dranetz-BMI’s patented transient capability captures and characterizes the complete power quality
spectrum, providing scope-like display of the entire transient. The PX5 also measures the full range of arithmetic, vector
and sequencing parameters contained in IEEE 1459, to evaluate distortion created by non-linear electric loads. This
distortion can have a significant derating effect, cause overheating of motors and other equipment, and shorten
equipment life.
Mfg.
Part No.
Description
PX108 PowerXplorer PX5 Package
CT109 Set of three 2510A CT probes
CT101 Set of three RR3035A/24 Flex CT probes, CA4300LEM Adapter, RR/
PS/4P
Stock No.
59K9507
59K9486
59K9484
Price
Each
10620.00
771.00
2440.00
(85559)
Features:
• Standard test voltages of 250V, 500V, 1000V, 2500V, 5000V
• Programmable test voltages available in 50 volt steps from
250 to 1000 volts and 100 volt steps from 1000 to 5000 volts
• Automatic calculation of Dielectric Absorption and Polarization
Index with no additional setup
• Improved ramp function (0 to 5000 VDC) for breakdown
testing
• Measures resistances up to 1 Tera-Ohm
• Measures cable or insulation capacitance and leakage current
• Warning voltage function alerts the user that voltage is
present and gives the voltage reading up to 600 V AC or DC
• Guard system eliminates the effect of surface leakage current
on high-resistance measurements
• Measurements can now be stored in up to 99 memory
locations, with each location assigned a unique, user defined, four character (alpha-numeric) label for easy
recall
• Includes improved Quicklink 1550B Software and Optical Interface cable for easier downloading to a
Windows® PC
• Runs off of high-capacity rechargeable batteries
• 2-year warranty
Mfg. part no. Fluke-1550B 5kV megohmmeter tests the insulation resistance of switchgears, motors, generators and
cable. Megohmmeter includes heavy-duty leads, probes, and alligator clips, Quicklink 1550B PC software with interface
adapter and cable, line cord, soft carrying case with waterproof base, user’s manual and ″getting-started″ guide.
Mfg. Part No.
FLUKE-1550B
Description
5kV Megohmmeter
Stock No.
89H3660
Price Each
3432.95
(72287)
FLUKE 1577 AND 1587
INSULATION MULTIMETERS
All models:
• A multimeter and insulation resistance tester all in one meter!
• Large backlit display
• Auto-discharge of capacitive voltage
• Auto power off
• Live circuit detection to prevent insulation test when voltage is >30V
• CAT III-1000V, CAT IV-600V measurement category
• 3-year warranty
• Recommended accessories: C25 Case, TLK-225 Accessory Set, i1010
Current Clamp
FLUKE 1587 Only:
• Filter for motor drive measurements
• Capacitance, Diode Test, Temperature,
Min/Max, Frequency (Hz)
• Also includes K-type thermocouple
1503 AND 1507 INSULATION TESTERS
• Automatic calculation of Polarization Index and Dielectric Absorption
Ratio saves both time and money (mfg. part no. 1507 only)
• Compare (Pass/Fail) function makes repetitive tests simple and easy
(mfg. part no. 1507 only)
• Remote test probe makes repetitive or hard-to-reach testing easier
• Live circuit detection prevents insulation test if voltage >30V is
detected for added user protection
• Auto-discharge of capacitive voltage for added user protection
• AC/DC voltage: 0.1V to 600V
• 200mA continuity
• Resistance: 0.01Ohm to 20.00KOhms
• Large, backlit digital display for easy readability
• CAT III – 1000V, CAT IV – 600V overvoltage category rating for
added user protection
• One-year manufacturer’s warranty
• Recommended accessories - TL225 Test Leads, C25 Case, TPAK
Meter Hanger
FLUKE 1587
FLUKE 1577 and 1587 insulation multimeters combine a digital insulation tester with a full-featured digital multimeter in
a single, compact handheld unit. Provides maximum versatility for both troubleshooting and preventative maintenance.
Rugged, reliable and easy to use. Ideal for work on motors, cables and switch gear. Included accessories: Remote probe,
test leads and probes, alligator clips, and rugged utility hard case.
Mfg. Part No.
DMM functions:
Insulation test:
Insulation test voltages:
1503 and 1507
Mfg. part nos. 1503 and 1507 insulation testers are compact, rugged, reliable, and easy to use. Multiple test voltages
make them ideal for troubleshooting, commissioning, and preventative maintenance. Additional features save both time
and money. Included accessories: remote probe, test leads and probes, alligator clips. Four AA alkaline batteries (NEDA
15A or IEC LR6) for at least 1000 insulation tests. These insulation testers accept mfg. part no. TPAK ToolPak magnetic
tool hanger to free your hands for other work. Order magnetic tool hanger and carrying cases separately below.
Mfg. Part No.
FLUKE-1577
FLUKE-1587
FLUKE 1577
FLUKE 1587
AC/DC voltage, DC mV, AC/DC mA,
Resistance (0.1Ω-50MΩ), Continuity
0.1MΩ to 600MΩ
0.01MΩ to 2GΩ
500V, 1000V
50V, 100V, 250V, 500V, 1000V
Description
500-1000V Insulation Multimeter
50 -1000V Insulation Multimeter
Stock No.
30K6970
30K6971
Price Each
502.95
621.95
(84802)
FLUKE-1587ET ADVANCED ELECTRICAL
TROUBLESHOOTING DMM KIT
INSULATION TESTERS
9
Mfg. Part No.
1503
1507
Insulation
Test Range
0.1Ω-2000MΩ
0.01MΩ-10GΩ
Insulation
Test Voltages
500V, 1000V
50V, 100V, 250V, 500V, 1000V
Stock No.
57K0680
57K0681
Price Each
342.95
453.95
Stock No.
97B3576
26K2562
44F7741
Price Each
33.15
47.65
31.00
ACCESSORIES
Mfg. Part No.
TPAK
FLUKE-C101
C25
Description
ToolPak Magnetic and Velcro Strap Tool Hanger
Hardside Carrying Case
Softside Vinyl Meter Case
(85521)
Kit includes:
• Fluke-1587 insulation digital multimeter
• Fluke-I400 AC current clamp
• Fluke-62 mini infrared thermometer
• Test probes, test leads and alligator test clips
• Durable hardside carrying case
• Documentation and users manuals
Mfg. part no. Fluke-1587ET advanced electrical troubleshooting DMM kit contains everything needed for preventative
maintenance and troubleshooting electrical system problems. With mfg. part no. Fluke-1587 digital multimeter,
perform insulation tests plus a wide-range of DMM tasks, including resistance, capacitance, temperature, continuity,
and frequency measuring, with confidence and ease. Use mfg. part no. Fluke I400 current clamp with mfg. part no.
Fluke-1587 DMM to accurately measure AC current without breaking the circuit. Check for hot spots and measure
temperature with mfg. part no. Fluke-62 mini noncontact IR thermometer.
Mfg. Part No.
FLUKE-1587 ET
Description
Advanced Electrical Troubleshooting DMM Kit
(85509)
(148857)
2228
STIBOINFO((NEWARK_MAIN_C124_2228))
C-2228
M-2228
Y-2228
B-2228
USEXP1-2228
Stock No.
55K4999
Price Each
794.95
ND3% BASE1
XXXX3829-2229-1-Page 2229 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:23 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
INSULATION & GROUND RESISTANCE TESTERS
FLUKE-1587MDT ADVANCED MOTOR AND
DRIVE TROUBLESHOOTING DMM KIT
FLUKE-162X SERIES GEO EARTH GROUND TESTERS (CONT.)
Mfg. Part No.
Description
GEO CABLE-REEL 50M Ground/Earth Cable Reel of Wire, 50M
Split Core Transformer, 12.7″
EI-162BN
Kit includes:
• Fluke-1587 insulation digital
multimeter
• Fluke-I400 AC current clamp
• Fluke-9040 phase rotation indicator
• Test probes, test leads and alligator
test clips
• Durable hardside carrying case
• Documentation and users manuals
(88086)
DIGITAL MEGOHMMETER INSULATION
RESISTANCE TESTERS
Mfg. part no. Fluke-1587MDT advanced motor and drive troubleshooting DMM kit contains everything needed for
preventative maintenance and troubleshooting motor and variable frequency drive electrical problems. With mfg. part
no. Fluke-1587 digital multimeter, perform insulation tests plus a wide-range of DMM tasks, including resistance,
capacitance, temperature, continuity, and frequency measuring, with confidence and ease. Use mfg. part no. Fluke
I400 current clamp with mfg. part no. Fluke-1587 DMM to accurately measure AC current without breaking the circuit.
Check the rotation of three-phase motors easily and safely with mfg. part no. Fluke-9040 phase rotation indicator.
Mfg. Part No.
FLUKE-1587 MDT
Stock No. Price Each
66K7435
65.00
83K1712
1825.00
Description
Advanced Motor and Drive Troubleshooting DMM Kit
Stock No. Price Each
55K5000
887.95
(85510)
• Tests Insulation of Wire, Cables,
Transformers and Electrical Motors
• Fast and Easy to Use, Rugged Durable
Design
• Programmable Timer to Perform Dielectric
Absorption Ratio Test
• Selectable Test Voltages Up to 1000V
• Sensitive Ohmmeter for Checking
Resistance of Motor Windings
• Automatic Voltmeter Warns Against
Hazardous Energized Systems (AMB-6D)
• Build-In Voltmeter (AMB-45)
• Internal Memory (AMB-45)
• Includes Test Leads and PC Software
• Safety CAT III 250V (AMB-6D), CAT III
600V (AMB-45)
AMB-6D
AMB-6D Specifications
Insulation Resistance with 50VDC Test Voltage
Insulation Resistance with 100VDC Test Voltage
Insulation Resistance with 250VDC Test Voltage
Insulation Resistance with 500VDC Test Voltage
Insulation Resistance with 1000VDC Test Voltage
AMB-45 Specifications
Insulation Resistance with 250, 500, 1000VDC Test Voltage
Low Resistance
AC/DC Voltage
FLUKE-162X SERIES GEO
EARTH GROUND TESTERS
Mfg. Part No.
AMB-6D
AMB-45
Description
Digital Insulation Resistance Tester
Digital Insulation Resistance Tester
AMB-45
Range & Resolution
0.01-19.99 49.9, 99.9MΩ
0.01-19.99 99.9, 1.99.9MΩ
0.01-19.99 199.9, 249, 499.9MΩ
0.01-19.99 199.9, 449, 999.9MΩ
0.01-19.99 199.9, 999, 1999MΩ
Range & Resolution
0 - 4.000 40.00, 400.0 4000MΩ
0 - 400.0, 4000MΩ
0.1 - 600.0V
Stock No.
73C2311
50H8694
Price Each
849.95
474.95
(72283)
FLUKE-1621
FLUKE-1625 Kit
FLUKE-1623
For each test, mfg. part nos. Fluke 1623 and 1625 earth ground testers inform the user which stakes or clamps need to
be connected. Both models also have an IP56 rating, suitable for outdoor use.
Mfg. part no. Fluke-1621 basic tester comes with test leads, one 9V battery, manual and protective holster best used
with ES-162P3 accessory. Sold separately in table below.
Mfg. part no. Fluke-1623 offers an innovative solution, called Stakeless testing, along with additional advanced
features to make your earth ground loop resistance testing quicker and easier. Kit comes with mfg. part no. 1623 basic
GEO earth ground tester, test leads, four earth ground stakes, three cable reels with wire, two clamps, batteries, manual
and hard carrying case.
Mfg. part no. Fluke-1625 offers three unique features: Automatic Frequency Control (AFC) to identify existing
interference and choose a measurement frequency to minimize its effect, R* measurement, earthing impedance with
55Hz for short circuit current in power distribution systems, and Adjustable Limits for quicker testing. Mfg. part no.
Fluke-1625 kit comes with mfg. part no. 1625 advanced GEO ground earth tester, test leads, 4 earth ground stakes, 3
cable reels with wire, 2 clamps, batteries, manual and hard carrying case.
FEATURES AT A GLANCE
Mfg. Part Nos.
FLUKE-1621
FLUKE-1623
FLUKE-1625
Fall of Potential Tests
3 Pole
3 and 4 Pole Using Stakes 4 Pole Using Stakes
Soil Resistivity Tests
2 Pole
4 Pole Using Stakes
Selective Tests
Use 1 Clamp and Stakes
Stakeless Tests
Use 2 Clamps Only
Automatic Frequency Control
●
R* Measurement, Earthing
●
Impedance with 55Hz
Adjustable Limits
●
●
Field Service and Industrial Maintenance
●
●
●
Utilities and Telecom
●
Mfg. Part No.
FLUKE-1625 KIT
FLUKE-1623 KIT
FLUKE-1625
FLUKE-1623
FLUKE-1621
Description
Advanced GEO Earth Ground Tester Kit
Basic GEO Earth Ground Tester Kit
Advanced GEO Earth Ground Tester
Basic GEO Earth Ground Tester
Basic Earth Ground Tester
Stock No. Price Each
83K1726
3279.95
83K1724
2289.95
83K1725
2369.95
83K1723
1369.95
50M1641
849.95
ACCESSORIES
Mfg. part nos. EI-1623 and EI-1625 clamp sets include one inducing clamp, one measuring clamp and necessary
cable and adapters. Mfg. part no. EI-162BN clamps around power pylon legs to perform selective tests. Mfg. part nos.
ES-162P3 and ES-162P4 earth stake sets work with both mfg. part nos. Fluke-1623 and Fluke-1625 GEO testers also
works with mfg. part no. Fluke-1621. Mfg. part no. ES162P3 set includes three earth stakes, one 25m reel and one
50m reel of wire. Mfg. part no. ES162P4 set includes four earth stakes, two 25m reels and one 50m reel of wire. NOTE:
the GEO Cable-Reels of wire are terminated on both ends; one end to plug into tester and the other to clip to the stakes.
Mfg. Part No.
EI-1623
EI-1625
ES-162P3
ES-162P4
GEO EARTH STAKE
GEO CABLE-REEL 25M
Description
Selective/Stakeless Clamp Set for FLUKE-1623
Selective/Stakeless Clamp Set for FLUKE-1625
Earth Stake Set for 3 Pole Measurement
Earth Stake Set for 4 Pole Measurement
Ground/Earth Stake
Ground/Earth Cable Reel of Wire, 25M
Stock No. Price Each
83K1713
585.95
83K1714
736.95
83K1715
221.95
83K1716
312.95
66K7436
53.00
66K7434
50.00
DIGITAL MEGOHMMETER INSULATION
RESISTANCE TESTER
• Tests insulation of wires, cables, transformers
and electrical motors
• Comes as a complete kit including test leads
• Selectable test voltages up to 1000V
• Programmable timer to perform the Dielectric
Absorption Ratio Test
• Sensitive Ohmmeter for checking resistance of
motor windings
• Internal memory (stores 9 reading)
• Fast and easy to use rugged durable design
Includes carry case, Test leads complete set and instruction
Features
Insulation resistance
with 250,500,1000V VDC test voltage
Resistance
Low Resistance
AC/DC Voltage
Mfg. Part No.
AMB-25
C-2229
M-2229
Accuracy
±3% Rdg ± 5 LSD <1GΩ
0 - 9999Ω
-----
1% Rdg +2 LSD
2% Rdg +2 LSD
±2.0% Rdg ± 1 LSD
Description
Digital Megohmmeter 250, 500, 1000 VDC
Stock No.
02J0398
Price Each
299.95
(79235)
9
AMB-5KVD DIGITAL MEGATEST 5000
• 5000V Digital Insulation Resistance Tester
• Tests Insulation of Wire, Cables, Transformers
and Electrical Motors and Generators
• Programmable Set-Up of Test Voltages and
Timers
• Rugged Durable Design
• Performs Dielectric Absorption Ratio Test
• Built-In Automatic Voltmeter Up To 5000V Warns
Against Hazardous Energized Systems
• Inludes Test Leads and PC Software
• One Testing Instrument For Low and High
Voltage Systems
Specification
Testing Voltage
Resistance
Automatic Voltmeter
Configuration Memory
Internal Memory
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2229))
AMB-25
0 - 4.000/40.00/400.0/4000 MΩ
Y-2229
B-2229
USEXP1-2229
Range and Resolution
100V to 5000V with 25V Increments
100K - 500G Ohms
0-5000V
20 Programmable Set-Up Configurations
200 Measurements
2229
ND3% BASE1
XXXX3830-2230-1-Page 2230 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:23 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
INSULATION & GROUND RESISTANCE TESTERS
AMB-5KVD DIGITAL MEGATEST 5000 (CONT.)
Mfg. Part No.
AMB-5KVD
Description
5000V Digital Insulation Resistance Tester
Stock No.
73C6168
Price Each
2495.00
(72284)
MIT400 SERIES INDUSTRIAL
INSULATION AND CONTINUITY
TESTERS
•
•
•
•
•
Insulation testing to 1000V and to 200Gohms
Continuity testing at 200mA down to 0.01ohms
Analog and dual digital display with backlight
Insulation and continuity limit alarms
PI/DAR timer function (except mfg. part nos.
MIT400 and MIT480)
• AC/DC Voltage measurement
• CATIII 600V or CATIV 600V
• Calibration certificate
DIGITAL EARTH/GROUND
RESISTANCE METER
• Measures Earth resistance in 20/200/2000 ohm ranges
• Measures Earth ACV to 2000VAC (40 tto 500Hz)
• 2mA measuring current measures resistance without tripping
circuit breakers
• Data hold
• Auto power off
Mfg. part no. 309 digital earth resistance meter is a compact, batterypowered portable meter. Includes test leads, auxiliary earth spikes, carrying
case abd batteries.
Mfg. Part No.
Description
Digital Earth Resistance Meter
309
309
Stock No.
54M5382
Price Each
189.00
(101646)
SPECIFICATIONS
Mfg. Part No.
MIT xxx-EN
INSULATION VOLTAGE RANGE
10-100V Variable (2GΩ - 20GΩ)
50V
100V
250V
500V
1000V
PI/DAR TESTING
Timed Testing
(30/60 Seconds, 1 min./10 min.
UPPER INSULATION RESISTANCE
Insulation Range GΩ
Leakage Current Display
INS Test Voltage Display
CONTINUITY
200mA (0.01 to 200Ω)
Variable Current Limit 200mA/20mA
Fast Buzzer — Selectable Threshold
K Ohm Range to 999KΩ
VOLTAGE
Live Circuit Warning @ 50V
Live Circuit Warning @ 75V
Default Voltmeter
TRMS Measurement to 600V
MEASUREMENT RANGES
Frequency 40Hz to 400Hz
Capacitance (0.1nF to 10µF)
Distance by Capacitance
MV/Transducer (0.1V to 19.99V)
STORAGE
Bluetooth Downloading
Storage Only
5kV AND 10kV INSULATION
RESISTANCE TESTERS
•
•
•
•
•
•
Line supply or battery operated
Digital/Analog backlit display
Automatic insulation resistance tests
3 mA short circuit current
Rated IP65
Meets EN-61010 for arc-flash
protection
• Calibration certificate included
Designed for testing and maintenance of high voltage equipment. All have large, easy to read backlit LCD displays that
show resistance, voltage, leakage current, capacitance, battery status, and time constant. Elapsed time is displayed
constantly, automatically starting at the beginning of a test. No external timer is needed. The MIT1020/2 allows up to 3
timed measurement positions to be set to simplify DAR testing and includes a breakdown and alarm mode where an
alarm sounds if the resistance is under a preset selectable level.
If the instrument is accidentally connected to a live voltage, the voltage will be displayed and testing will be inhibited if
the voltage exceeds 50V for MIT510/2 and MIT520/2 or 80V for MIT1020/2. At the end of the test, any stored voltage is
discharged and monitored on the display. All models include a guard terminal and a guard test lead, a 3-meter test lead
set, and a user guide on CD.
SPECIFICATIONS
Test Voltages
Measurements
Tests
Timer
Output
9
10 kV
5 kV
2.5 kV
1 kV
500 V
250 V
10V Steps 50V-1kV, 25V Steps 1kV to 5kV
Max resistance
Min resistance
Voltage
Capacitance and time constant
Leakage curent
Auto IR
Polarization index
Step voltage
Dielectric discharge
Dielectric absorption ratio
Timer control
Timer display
USB
RS232
Mfg. Part No.
MIT510/2
MIT520/2
MIT1020/2
Description
5kV Insulation Resistance Tester
5kV Insulation Resistance Tester
10kV Insulation Resistance Tester
MIT510/2
MIT520/2
X
X
X
X
X
X
X
X
X
X
X
15 TOhms
10 kOhms
X
X
X
X
X
X
X
X
X
X
X
X
15 TOhms
10 kOhms
X
X
X
X
X
Stock No.
98M0028
98M0031
98M0003
MIT1020/2
X
X
X
X
X
X
35 TOhms
10 kOhms
X
X
X
X
X
X
X
X
X
X
X
X
Price Each
3265.00
4250.00
5135.00
Service and Telco
Applications
480 481 485
Special
Applications
40X
X
X
X
X
20
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
100 200 200
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
200
X
X
200
X
X
2 - 20
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
100
X
X
X
X
X
X
X
X
X
X
Mfg. Part No.
Description
MIT400-EN Insulation and Continuity Tester, 20GΩ
MIT410-EN Insulation and Continuity Tester, 100GΩ, PI/DAR Testing
MIT420-EN Insulation and Continuity Tester, 200GΩ, PI/DAR Testing, Data
Storage
MIT430-EN Insulation and Continuity Tester, 200GΩ, PI/DAR Testing, Data
Storage, Bluetooth Wireless Data Storage and Downloading
Stock No. Price Each
84K9406
555.00
84K9407
635.00
84K9408
685.00
84K9409
780.00
84K9410
84K9411
610.00
830.00
84K9412
930.00
84K9405
655.00
SERVICE AND TELECOM APPLICATIONS — LIVE CIRCUIT WARNING @ 75V
MIT480-EN Insulation and Continuity Tester, 100GΩ
MIT481-EN Insulation and Continuity Tester, 200GΩ, PI/DAR Testing, Data
Storage, Distance by Capacitance
MIT485-EN Insulation and Continuity Tester, 200GΩ, PI/DAR Testing, Data
Storage, Bluetooth Wireless Data Storage and Downloading,
Distance by Capacitance
SPECIAL APPLICATIONS — LIVE CIRCUIT WARNING @ 50V
MIT40X-EN Insulation and Continuity Tester, 2 to 20GΩ, Variable 10 to 10V
Test Voltage
•
•
•
•
Four test voltages to 5 kV
Hand crank or 8AA batteries
Shock mounted analog scale
Voltage range to 600V indicates
auto discharge
• Pass/fail overlays for rapid testing
(88602)
Mfg. part no. MJ15 is compact, simple to use, quick and accurate. It measures to 20 Gohms, with test voltages 500 V, 1
kV, 2.5 kV, or 5 kV. Comes complete with soft carrying case, test lead set, test record cards, and 8AA batteries.
Mfg. Part No.
Description
Analog 5 kV Insulation Tester
MJ15
Stock No. Price Each
70K3429
2360.00
(89377)
2230
STIBOINFO((NEWARK_MAIN_C124_2230))
Industrial
Applications
400 410 420 430
INDUSTRIAL APPLICATIONS — LIVE CIRCUIT WARNING @ 50V
(89376)
ANALOG 5kV
INSULATION TESTER
MIT430-EN
MIT400 series industrial insulation and continuity testers are designed to meet IEC1010-2 and EN61557, and sealed to
IP54. Mfg. part nos. MIT420-EN and MIT481-EN are capable of saving test results for recall to the screen. A simple
storage structure allows for a test number and screen results to be recalled individually. Mfg. part nos. MIT430-EN and
MIT485-EN support both test result storage and downloading. Rubber boot combines tough, shock-absorbing outer
protection with an excellent grip, on a strong modified ABS housing. All models are supplied with: test leads — 2 wire
lead set to CAT IV 600V, consisting of red and black leads 1.25m complete with probe, red and black crocodile clips,
instrument rubber boot, calibration certificate and user manual. Requires six AA batteries (either alkaline or NiMH)
rechargeable type, ordered separately; go online or call.
C-2230
M-2230
Y-2230
B-2230
USEXP1-2230
ND3% BASE1
XXXX3831-2231-1-Page 2231 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:23 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
INSULATION & GROUND RESISTANCE TESTERS • TELEPHONE LINE TEST
DIGITAL INSULATION TESTER
SURFACE RESISTANCE
METER
• Easy-to-Read Display
• Wide Measuring Range
• Built-In Over-Input and
Low-Battery Indication
• Overload Protection on All Ranges
• Sensitive Ohm Meter Scale:
0-200Ω for Measuring LowResistance Circuits
• Automatic Zero Adjust
and Circuit Discharge
• CE Compliant
Compact, easy-to-read, battery-powered digital insulation tester. Includes instruction manual and alligator clips.
Batteries not included.
SPECIFICATIONS
Range
Accuracy
Resolution
200MΩ (500V)
±(3% +1d)
0.1MΩ
1000MΩ (1000V)
±(3% +1d)
1MΩ
2000Ω
±(3% +1d)
0.1Ω
Power
DC 12V (8 x 1.5V AA batteries)
Mfg. Part No.
72-6782
Description
Digital Insulation Tester
Stock No.
17C6506
Price 1-4
148.48
• Designed to measure both surface resistance and
resistance to ground
• The meter will test conductive, static dissipative and
insulative surfaces
• Decade changeover ± 1/2 decade on a logarithmic scale
• Resolution 1 decade
• Accuracy ± 1/2 decade
• Temperature 4°C to 55°C
• Powered by 9V PP3 alkaline battery
• Test voltage nominal 9V
• Weight 182 grams
• Dimensions 128 x 63 x 25mm
Mfg. Part No.
093-0005
Stock No.
74M5623
Price Each
1-4
329.58
(116629)
TS®22 SERIES
TELECOM TEST SET
(69132)
307A ANALOG INSULATION TESTER
Mfg. part no. 307A provides selectable voltage testing with
250V/50MΩ, 500V/100MΩ, or 1000V/200MΩ ranges. Analog display.
Battery operated. Low resistance test. Includes batteries, integral
carrying case w/strap, test leads, and instruction manual.
Mfg. Part No.
307A
Description
Analog Insulation Tester
Stock No.
52M2681
Price Each
1-2
222.88
(6573)
22800-001
TS®22 series telecom test set offers an unbeatable combination of reliability, durability and expanded utility. Multiple
memories enable storage of nine 18-digit telephone numbers in repertory dialer (speed dialing) for easy access to the
test boards, the CO and other frequently called numbers. The last-number redial feature eliminates the need to re-key
your last entry. TS®22A series telecom test set’s unique built-in amplified speaker provides 3 audio levels for hands free
listening and use with automated voice response systems.
Mfg. Part No.
Description
Stock No. Price Each
48F4944
260.27
22800-001 TS22 Telecom Test Set Standard Cord
48F4945
301.37
22801-001 TS22A Telecom Test Set with Piercing Pin Cord
48F4946
298.46
22801-009 TS22A Telecom Test Set with Speaker Phone
(39375)
308A DIGITAL INSULATION TESTER
TS®19 SERIES
TELECOM TEST SET
Mfg. part no. 308A provides selectable voltage testing of 250V, 500V
or 1000V with resistance to 2000MΩ. 31⁄2 -digit LCD. Battery operated.
Low resistance test. Includes batteries, integral carrying case w/strap,
test leads, and instruction manual.
Mfg. Part No.
308A
Description
Digital Insulation Tester
Stock No.
54M5381
Price Each
1-2
308.00
(6572)
INSULATION TESTER
TS®19 series telecom test set combines all of the basic test set features at an incredible price. Its high-impedance
monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus providing the
integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test
button and last number redial make this test set the perfect combination of features and price.
Mfg. Part No.
Description
Stock No. Price Each
TS19 Telecom Test Set
48F4962
102.40
19800003
48F4943
102.40
TS19 Telecom Test Set with Angled Bed-of-Nails
19800009
(39374)
Mfg. part no. 501 insulation tester measures insulation resistance with 5 test voltages up to 1000V.
Voltmeter to 1000V AC/DC. Test probe signal lamp
illuminates work area and indicates pass/fail of insulation resistance. Includes carrying case, 2 test probes,
2 alligator clips and 6 D size batteries. CE compliant.
Mfg. Part No.
501
Description
5 Test Voltage Insulation Tester
9
CLASSIC TONE
GENERATOR AND
PROBE KIT
Stock No.
95B9088
Price Each
1036.58
(51479)
Used to identify single conductors or cable within a bundle, at a cross-connect point or at remote ends. Mfg. part no.
701K classic tone and probe kit includes: mfg. part no. 77HP high-power tone generator and mfg. part no. 200EP
inductive amplifier packaged in a rugged woven polyester carrying case. Order kit replacement components separately
below.
Mfg. Part No.
Description
Stock No.
Price Each
Classic Tone Generator and Probe Kit
06C9930
133.16
701K
07C0056
43.66
High-Power Tone Generator
77HP
06C5591
83.57
Standard Inductive Amplifier
200EP
(62183)
(148858)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2231))
C-2231
M-2231
Y-2231
B-2231
USEXP1-2231
2231
ND3% BASE1
XXXX3832-2232-1-Page 2232 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:23 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
TEST LEADS & ACCESSORIES
SUREGRIP™ ACCESSORIES
FTP AND FTPL SUREGRIP
FUSED TEST PROBES AND KIT
• Built-in fuses for additional measurement protection
• Probes allow indication of live voltage even with blown
fuse
• 2 mm threaded probe tips include removable 4 mm
lantern-style spring contacts and removable GS38
insulated IC caps
• Operating temperature: -20°C to 50°C (-5°F to 120°F)
• Rated to CAT III 1000 V, CAT IV 600 V, 10A
SureGrip™ accessories were designed to provide a reliable grip in
slippery hands. Rubber-overmolded surfaces and finger-hugging
curves give the user a comfortable steady hold. For industrial, electrical
and electronic environments. Designed for comfort, ergonomic support and durability. Can be used safely in both CAT III and CAT IV
settings (1000V CAT III, 600V CAT V).
Modular FTP probes can mount onto any Fluke modular lead format. FTPL set includes Fluke TL224 modular leads with
the fused test probes. Also include removable sheathed tips for additional safety.
AC220 SUREGRIP™ ALLIGATOR CLIPS
• One Pair (Red, Black) of Small, Insulated, Nickel-Plated Jaws
• Blunt Tip Grabs Round Screw Heads Up to 9.5mm
Mfg. Part No.
AC220
Description
SureGrip Alligator Clips
Stock No.
81C7979
Price Each
30.10
AC285 SUREGRIP™ LARGE ALLIGATOR CLIPS
• One Pair (Red, Black) of Large Alligator Clips with Nickel-Plated Steel Jaws
• Multipurpose Tooth Pattern Grips Anything from Fine Gauge Wire to a 20mm Bolt
Mfg. Part No.
AC285
Description
SureGrip Large Alligator Clips
Stock No.
81C7982
Price Each
18.05
AC280 SUREGRIP™ HOOK CLIPS
• One Pair (Red, Black) of Nickel-Plated Clips
• Profile Narrows to 5.6mm at Tip, Hook Opening 6.4mm at Front, 2mm at Base
Mfg. Part No.
AC280
Description
SureGrip Hook Test Clips
Stock No.
81C7980
Price Each
26.45
Stock No.
81C7981
Price Each
30.10
AC283 SUREGRIP™ PINCER CLIPS
• One Pair (Red, Black) of Nickel-Plated Pincers Open to 5mm
• 11.4 cm Flexible Insulated Shaft
Mfg. Part No.
AC283
Description
SureGrip Pincer Test Clips
Mfg. Part No.
FTP
FTPL
Stock No.
81C8008
Price Each
14.45
TL222 SUREGRIP™ SILICONE-INSULATED INDUSTRIAL TEST LEADS
• DMM Test Leads (Red, Black) with Safety Shrouded, Standard Diameter Banana Plugs
• Right Angle Connector on Both Ends, Reinforced Strain Relief
Mfg. Part No.
TL222
Description
SureGrip Silicone-Insulated Industrial Test
Leads
Stock No.
30H0450
Price Each
22.85
TL224 SUREGRIP™ SILICONE-INSULATED INDUSTRIAL TEST LEADS
• DMM Test Leads (Red, Black) with Safety Shrouded, Standard Diameter Banana Plugs
• Right Angle Connector on One End and Straight Connector on the Other
• Reinforced Strain Relief 1.5m Silicone-Insulated Wire Resists Heat and Cold
Mfg. Part No.
TL224
Description
SureGrip Silicone-Insulated Industrial Test
Leads
Stock No.
81C8007
Price Each
22.85
TL220 SUREGRIP™ INDUSTRIAL TEST LEAD SET
• Mfg. part no. AC220 SureGrip™ Alligator Clip Set
• Mfg. part no. TP220 SureGrip™ Test Probe Set
• Mfg. part no. TL222 SureGrip™ Silicone Test Lead Set (Right-to-Right)
Mfg. Part No.
TL220
Description
SureGrip Industrial Test Lead Set
Stock No.
30H0448
Price Each
59.10
TL221 SUREGRIP™ SILICONE-INSULATED TEST LEAD EXTENSION SET
• One Pair (Red, Black) of Silicone-Insulated Leads with Straight Connectors on Both Ends
• Reinforced Strain Relief
• Includes One Pair (Red, Black) of Female Couplers
• Extends Test Leads by 1.5m
Mfg. Part No.
TL221
9
Description
SureGrip Silicone-Insulated Test Lead
Extension Kit
Stock No.
30H0449
TLK287 ELECTRONIC
TEST LEAD SET
• The TLK287 is TLK287
Electronics Master Test Lead Set
• Precision electronic probes with
multiple spring-loaded sharp tips
to maximize contact with SMD
test points
• Micro-grabbers and leads to
enable fin SMD test
• Mini-alligator clips, grabbers,
and probes for virtually every
electronics need
TL223 SUREGRIP™ ELECTRICAL TEST LEAD SET
• Mfg. part no. AC220 SureGrip™ Alligator Clip Set
• Mfg. part no. TP1 Slim-Reach™ Test Probes (Flat Bladed)
Mfg. Part No.
TL223
Mfg. Part No.
TLK289
Description
Industrial Master Test Lead Set
Stock No.
70M8700
Price Each
119.55
TL75 HARD POINT™ TEST LEAD SET
• Set Includes: One Pair (Red, Black) Comfort Grip Probes with PVC Insulated, Leads with Right-Angle,
Shrouded Banana Plugs
• Recommended for General-Purpose Measurements
• Rating: Dual Safety Rated CAT III 1000V and CAT IV 600V
• UL listed
Mfg. Part No.
TL75
Description
Hard Point™ Test Lead Set
Stock No.
44F622
Price Each
18.05
TL71 PREMIUM TEST LEAD SET
• Set Includes: One Pair (Red, Black) Comfort Grip Probes with Silicone Insulated, Right-Angle Test Leads
• Replacement Test Leads for Series 80 IV DMMS
• Recommended for µV Measurements
• Rating: Category III, 1000V, 10A
• UL listed
Description
Premium Test Lead Set
Stock No.
94B7832
Price Each
21.65
Stock No.
82H8219
Price Each
30.40
L210 PROBE LIGHT AND PROBE EXTENDER KIT
• Kit Includes Probe Light and Test Probe Extenders
• 8″ Probe Keep Hands Away From Live Circuits
• Extender Fits Between Modular Test Probe and Test Lead
• 120 Hours of Battery Life, Uses 2-3 Volt Watch Batteries
Mfg. Part No.
L210
Description
SureGrip Electrical Test Lead Set
Stock No.
26H1655
Description
SureGrip High-Energy Test Lead Set
Description
Probe Light and Probe Extender Kit
Price Each
59.10
DMM TEST LEAD KITS
Stock No.
10J8436
Description
SureGrip Stray Voltage Eliminator Adapter Test
Lead Set
Price Each
58.45
MTL-500
Stock No.
26K2570
(85791)
2232
C-2232
M-2232
MTL-501
Mfg. Part No.
Description
MTL-500 Double Insulated Silicon Test Leads, Short Prods, and Insulated
Crocodile Clips, One Pair Each
MTL-501 MTL-500 PLUS USA Mains Socket Test Adapter and Sprung Hooks,
One Pair Each
Price Each
86.10
(74806)
STIBOINFO((NEWARK_MAIN_C124_2232))
Price Each
119.55
TLK 289 INDUSTRIAL MASTER TEST LEAD SET
• SureGrip™ alligator clips, grabbers, hook clips and industrial test probes for dependable contact with a
variety of test points
• Magnetic hanger for convenient suspension of your DMM from a metal surface
• Temperature adapter with K-Type thermocouple for direct temperature measurement with your DMM’s
temperature measurement functions
• Protective soft case for your DMM and all its accessories
TL225 SUREGRIP™ STRAY VOLTAGE ELIMINATOR ADAPTER TEST LEAD SET
• Mfg. part no. SV225 SureGrip™ Stray Voltage Eliminator
• Mfg. part no. TL224 SureGrip™ Silicone Test Lead Set (Right-to-Straight)
• Mfg. part no. TP220 SureGrip™ Test Probe Set
• Mfg. part no. C75 Accessory Case
Mfg. Part No.
FLUKE-TL225
Stock No.
70M8699
(61081)
TL238 SUREGRIP™ HIGH-ENERGY TEST LEAD SET
• Pair Insulated Tip Probes Lessen the Risk of Arc Flash Explosion
• Pair 8″ Probe Extenders Keep Hands Away from Live Circuits
• Mfg. part no. TL224 SureGrip™ Silicone Test Lead Set (Right-to-Straight)
Mfg. Part No.
TL238
TL81A
Description
Electronics Master Test Lead Set
Mfg. Part No.
TL71
Price Each
22.85
Price Each
74.95
84.95
TEST LEAD SETS AND
PROBE LIGHT KIT
Mfg. Part No.
TLK287
Description
SureGrip Industrial Test Probes
Stock No.
09R2352
09R2353
(147953)
TP220 SUREGRIP™ INDUSTRIAL TEST PROBES
• One Pair (Red, Black) of Industrial Probes
• 12mm Stainless Steel Tip Provides Reliable Contact
Mfg. Part No.
TP220
Description
Fused Test Probe Set
Fused Test Probe Set with Test Leads
Y-2232
B-2232
USEXP1-2232
Price
Stock No. Each
66K6292 35.95
66K6293
59.95
ND3% BASE1
XXXX3833-2233-1-Page 2233 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:24 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
TEST LEADS & ACCESSORIES
MAXIGRABBER® TEST CLIP SETS
BASIC TEST
LEAD KIT
• Silicone lead wires, 48” long, red
and black
• Standard probe tips, red and black
• Alligator clips, red and black
• Spade lugs, red and black
• Carry case with pockets and
VELCRO® closure
• EN61010-2-03, CE safety approved
Mfg. Part No.
DL243D
5910B
Description
Basic Test Lead Kit
Price
Each
34.95
Stock No.
71M3145
(147136)
DMM TEST COMPANION™ KITS
5911B
5912B
5913
Rated to IEC 1010-2-031 CATIII 1000V, 10A (except mfg. part no. 5913, IEC 1010-2-031 CAT III 1000V 5A). Each set
contains one black and one red clip.
Mfg. part nos. 5910B, 5911B and 5912B feature a long shaft that is ideal for electronic, electrical and industrial
applications where access to hard to reach high voltage test points is a requirement. Safety sheathed jack mates to
Pomona’s 5907A, 5908A and 5909A flexible test leads for digital multi-meter interfacing. Mfg. part no. 5910B pincer
can securely grab a 0.16″ (4mm) max. O.D. terminal post. Mfg. part no. 5912B clip jaws securely grip wires and test
points for solid contact with conductors.
Mfg. part no. 5913 pierces wire up to 0.14″ diameter and is for use with 23-16 AWG wire. Compatible with all Pomona
banana plug leads. Sheathed 4mm receptacle accepts shrouded and unshrouded banana plugs.
Mfg. Part No.
● 5910B
● 5911B
● 5912B
● 5913
Description
Test Clip Set with Pincer
Test Clip Set with Hook
Test Clip Set with Jaws
Insulation Piercing Test Clip Set
Stock No.
73K9952
73K9953
73K9954
95F1295
Price Each
1-9
30.67
23.42
32.81
53.66
(42174)
DELUXE DMM TEST
MAXI KIT
6172A
6173A
Mfg. part no. 5677 is ideal for Test and Measurement Scenarios using DMM’s. Includes silicone insulated 4ft (1.2m)
leads with right angle plug, modular probe set with replaceable tips, replacement tips set, Retractable tip test probe set,
test lead coupler set, medium alligator clip set, large alligator clip set, spade lugs, IC probe tip adapter, Minigrabber® test
clip leads, Minipincer® test clip leads, and Nylon storage pouch.
Price Each
Mfg. Part No.
Description
Stock No.
1-4
Deluxe DMM Kit
30C4814
149.71
5677B
6174
(5328)
TERMINAL JACK-TO-BANANA
JACK ADAPTERS
6175
Cordura Carrying Case
DMM Test Companion™ kits are specifically designed to accompany Fluke 80 series DMM’s and other DMM’s with
safety inputs. Four professional grade kits have been created to provide tools to match your needs in the field. Each kit
comes with a shoulder-pack style Cordura carrying case with shoulder strap. Cases are weather resistant and are
designed with extra padding to hold an protect instruments. These cases also have several compartments designed to
hold accessories, tools, batteries, and documentation.
Mfg. part no. 6172A includes a medium alligator clip set, 2 spade lug adapters, 2 pincer tip test clips, 2 hook tip test
clips, 2 banana tip modular test probes, 2 48″ (1.2m) modular test leads and 2 48″ (1.2mm) stainless steel tip test leads.
Includes Condura Carrying Case.
Mfg. part no. 6173A includes a medium alligator clip set, large alligator clip set, 2 spade lug adapters, 2 jaw tip test
clips, 2 pincer tip test clips, 2 hook tip test clips, 2 banana tip modular test probes, 2 48″ (1.2m) modular test leads and 2
48″ (1.2mm) stainless steel tip test leads. Includes Condura Carrying Case.
Mfg. part no. 6174 includes a medium alligator clip set, flexible test lead set, Minigrabber® test set, extended tip, IC test
tip adapter, spade lug with jack, Micrograbber® test clip-to-pop jack, SMD Grabber ® test clip-to-pop jack, and SMD test
tweezer-to-sheathed banana plugs. Includes Cordura Carrying Case.
Mfg. part no. 6175 includes a medium alligator clip set, flexible test lead set, Minigrabber® test clip, extended tip, IC test
tip adapter, assorted replacement tips, Minipincer® test clip set, spade lug with jack, Micrograbber® test clip-to-pop
jack, SMD grabber test clip-to-pop jack, SMD test tweezer-to-sheathed banana plugs, and test probes with replacement
tip. Includes Cordura Carrying Case.
Mfg. Part No.
● 6172A
● 6173A
6174
6175
Description
Industrial Digital Multimeter Test Kit
Deluxe Digital Multimeter Test Kit
Electronic Digital Multimeter Test Kit
Digital Multimeter Test Kit
Stock No.
73K9972
73K6638
48F1174
48F1175
Fig. 2
Fig. 1
• Provides banana jack connection by replacing the screw in a terminal strip or control panel
• Allows a standard sheathed or unsheathed banana plug / patch cord to securely connect to a terminal strip
• Helps to avoid accidental arc-over by eliminating the usage of alligator clips, or test probe “slip offs” during
measurement applications
• Perfect for use with model 73087 jumper test lead sets in peer-checking system test sequences
• Nickel-plated brass banana jacks with polypropylene V-2 insulation
Price Each
1-4
135.80
186.66
173.45
203.73
Mfg. Part No. Fig.
1
73084-0
1
73084-2
1
73084-4
1
73084-6
1
73088-0
1
73088-2
1
73088-4
1
73088-6
1
73085-0
1
73085-2
1
73085-4
1
73085-6
2
73086-0
2
73086-2
Convert From
6-32 Male Terminal Jack
6-32 Male Terminal Jack
6-32 Male Terminal Jack
6-32 Male Terminal Jack
8-32 Male Terminal Jack
8-32 Male Terminal Jack
8-32 Male Terminal Jack
8-32 Male Terminal Jack
10-32 Male Terminal Jack
10-32 Male Terminal Jack
10-32 Male Terminal Jack
10-32 Male Terminal Jack
10-32 Female Terminal Jack
10-32 Female Terminal Jack
Convert To
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Banana Jack
Color Stock No.
Black 08R6366
08R6367
Red
Yellow 08R6368
08R6369
Blue
Black 08R6378
08R6379
Red
Yellow 08R6380
08R6381
Blue
Black 08R6370
08R6371
Red
Yellow 08R6372
08R6373
Blue
Black 08R6374
08R6375
Red
Price Each
Each
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
(5394)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2233))
C-2233
M-2233
Y-2233
B-2233
USEXP1-2233
2233
9
ND3% BASE1
XXXX3834-2234-1-Page 2234 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:24 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
TEST LEADS & ACCESSORIES
TERMINAL JACK-TO-BANANA JACK ADAPTERS (CONT.)
Mfg. Part No. Fig.
2
73086-4
2
73086-6
Convert From
10-32 Female Terminal Jack
10-32 Female Terminal Jack
Price Each
Convert To Color Stock No.
Each
Banana Jack Yellow 08R6376
1.99
08R6377
1.99
Banana Jack Blue
(147910)
DELUXE
ELECTRONIC
DMM KIT
PRECISION ELECTRONIC
PROBE SETS AND KITS
• Ideal for Probing Fine Pitch IC
Leads and Densely Packed PC
Boards
• Slim Design Tip Enables a
Firm Grip and Access Into
Tight Spots
• Rating: 1000V, 3A Max.
6275
Ideal for probing fine pitch IC leads and densely packed PC Boards. Slim design tip enable firm grip and access into tight
spots. Rated to IEC 1010-2-031 CAT III 1000V, 3A Max. Compact and ergonomic, these high precision probes fit most
DMM’s. Note: Mfg. part no. 6341 includes a set of 5 0.040” dia. Stainless steel and gold-plated replacement tips.
Designed for electronic DMM testing scenarios. Includes silicone insulated 4 ft (1.2m) leads with right angle plug,
modular probe set with standard tips, extended probe tip adapters, medium alligator clips, IC probe tip adapters,
Minigrabber® test clip leads, Minipincer® test clip leads, Maxigrabber® test clips with pincer tip, and nylon storage
pouch. Insulated 4ft (1.2m) test leads with right-angle DMM plugs fit most meters from Fluke, HP, Wavetek (Meterman),
and others.
Mfg. Part No.
5674C
Description
Electronic Digital Multimeter Kit
Price Each
1-4
171.70
Stock No.
73K9941
(61176)
Mfg. Part No.
● 6341
● 6342
● 6275
● 6601
Description
Probe Kit with Tip Set and Case
Probe Set with Gold-Plated Tips
Probe Set with Stainless Steel Tips
Probe Set with Removable 4mm Banana Plug Adapter
Stock No.
51B961
91B0558
91B1291
82H6149
Price Each
1-9
47.28
27.30
23.96
23.52
(65379)
REPLACEMENT
MODULAR TEST
LEADS AND
PROBES
BASIC ELECTRICAL DMM KIT
5907A
5906A TEST PROBE HANDLE SET
Mfg. part no. 5906A set contains test probe handle with brass caged banana plug tip and sheathed 0.158″ (4) banana
jack in handle. Set contains one black, one red probe rated CAT III 1000V, 10A. Mfg. part no. 6232 similar to mfg. part
no. 5906A except .080 notch tip.
Basic test lead kit contains a set of modular test probes
and 4’ silicone insulated test leads. The set of Maxigrabber® test clips attach to the leads in place of the probes.
Supplied with a convenient carry pouch. IEC1010-2-031
CAT III 1000V. UL listed.
Mfg. Part No.
● 5900A/POM
Description
Basic Electrical Digital Multimeter Kit
Stock No.
73K9949
Price Each
1-4
68.65
Price Each
Mfg. Part No.
Description
Stock No.
1-9
Test Probe Handle Set
95F1302
14.80
● 5906A
Set fit Fluke, HP, Tektronix, and Wavetek brand-multimeters. Rated CAT III 1000V. One black, one red lead. 48″ long
high-temperature silicone wire. Mfg. part no. 5907A right-angle sheathed banana plug to straight sheathed banana
plug. Mfg. part no. 5908A straight sheathed banana plug each end. Mfg. part no. 5909A right-angle sheathed banana
plug each end.
FLEXIBLE TEST LEAD SETS
Mfg. Part No.
● 5907A
● 5908A
(61180)
REPLACEMENT
TEST PROBE KITS
●
●
5909-A
6358
Description
Right-Angle Sheathed Banana Plug
Straight Sheathed Banana Plug To
Straight Shreathed Banana Plug
Straight Sheathed Banana Plug
Straight DMM Plug To Retractable Sheath Plug
Stock No.
95F1291
48F1708
Price Each
1-9
18.27
18.27
95F1293
96B9220
17.75
20.77
(5399)
BASIC ELECTRONIC
DMM TEST LEAD KIT
Mfg. part no. 5519A kit has general-purpose replacement leads with standard 0.080 tip. Fit most meters from Fluke,
Wavetek (Meterman), HP (Agilent), Tektronix, Amprobe and many others. Mfg. part no. 5517A leads fit Simpson mfg.
part no. 260 meters with pin-type input jacks. Mfg. part no. 5898 leads have stainless-steel tips for penetrating
corroded or oxidized test points. All leads have 4′ silicone insulated wires.
9
Mfg. Part No.
● 5519A
● 5517A
● 5898
● 6262-02
Description
CAT III 1000V, UL
30VAC, 60VDC
CAT III 1000V, UL
Fine Point Extended Adapter for Pomona DMM Test Probes
Stock No.
90F2354
90F2362
95F1303
30C4846
Price Each
1-24
18.65
29.06
19.20
19.18
Nickel plated brass tip offers high conductivity for precision measurements. Contains 2 each test probe leads and
alligator clips, one black, one red. Also includes two pieces of dogleg micro tips. Supplied in a reusable plastic pouch.
Mfg. Part No.
● 5325A
(61182)
Description
Basic Electronic DMM Test Lead Kit
(9154)
(148831)
2234
STIBOINFO((NEWARK_MAIN_C124_2234))
C-2234
M-2234
Y-2234
B-2234
USEXP1-2234
Stock No.
94F1526
Price Each
1-9
22.97
ND3% BASE1
XXXX3835-2235-1-Page 2235 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:24 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
TEST LEADS & ACCESSORIES
TEST PROBE SETS
PATCH CORDS
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Mfg. part nos. 5952A and 5953A probes have tip that extends to 3.00″ (76.20) for hard-to-reach points. Mfg. part nos.
5950A and 5951A probes have replaceable .080″ (2.03) O.D. stainless steel tip. Probes connected by 48″ (1.22M) 18
AWG, 0.144″ (3.66) O.D. PVC wire. 1 black, 1 red probe.
Fig. 1
Fig. 3
Fig. 2
EXTENDABLE TIP PROBES
Mfg. Part No.
5952A
● 5953A
Fig.
1
2
Plug Type
Stacking Banana
Multimeter
Stock No.
35C4345
29C9527
1-9
30.45
30.45
30C4823
30C4824
30.45
30.45
Price Each
10-24 25-49
27.13
26.02
27.13
26.02
50+
24.64
24.64
REPLACEABLE TIP PROBES TO BANANA PLUGS
5950A
5951A
3
4
In-Line Banana
Right-Angle Banana
27.13
27.13
26.02
26.02
24.64
24.64
(8970)
MOLDED BREAKOUTS
Fig. 4
Fig. 5
Fig. 6
Pomona has made it easy for you to get exactly what you need with a huge selection of patch cords and test leads
designed for reliable, convenient connections.
STACKING PIN TIP PLUG EACH END — FIG. 1
0.080″ (2.03) O.D. pin tip. 20 AWG. 3000VDC, 5A, +55°C.
Price Each
Mfg. Part No.
● P-4-0
● P-4-2
● P-8-0
● P-8-2
● P-12-0
● P-12-2
● P-24-0
● P-24-2
● P-36-0
● P-36-2
Fig. 1
L
4″
4″
8″
8″
12″
12″
24″
24″
36″
36″
Color
Black
Red
Black
Red
Black
Red
Black
Red
Black
Red
Stock No.
06M7552
06M7553
06M7554
06M7555
06M7546
06M7547
06M7548
06M7549
06M7550
06M7551
1-24
7.57
7.57
7.74
7.74
7.74
7.74
8.05
8.05
8.20
8.20
25-49
7.26
7.26
7.42
7.42
7.42
7.42
7.72
7.72
7.86
7.86
50-99
7.10
7.10
7.26
7.26
7.26
7.26
7.55
7.55
7.69
7.69
100249
6.57
6.57
6.71
6.71
6.71
6.71
6.98
6.98
7.11
7.11
6.22
6.22
6.37
6.37
6.37
6.37
6.37
6.37
6.54
6.54
6.54
6.54
6.68
6.68
6.68
6.68
6.68
6.68
6.82
6.97
7.11
7.11
7.11
7.11
7.07
7.11
8.78
11.38
11.38
5.96
5.96
6.10
6.10
6.10
6.10
6.10
6.10
6.26
6.26
6.26
6.26
6.40
6.40
6.40
6.40
6.40
6.40
6.54
6.68
6.82
6.82
6.82
6.82
6.77
6.82
7.93
10.91
10.91
5.83
5.83
5.97
5.97
5.97
5.97
5.97
5.97
6.13
6.13
6.13
6.13
6.26
6.26
6.26
6.26
6.26
6.26
6.40
6.54
6.67
6.67
6.67
6.67
6.63
6.67
7.65
10.67
10.67
5.40
5.40
5.52
5.52
5.52
5.52
5.52
5.52
5.67
5.67
5.67
5.67
5.79
5.79
5.79
5.79
5.79
5.79
5.92
6.04
6.17
6.17
6.17
6.17
6.13
6.17
7.46
9.87
9.87
7.11
7.11
7.43
7.43
7.57
7.57
8.80
6.82
6.82
7.12
7.12
7.26
7.26
8.44
6.67
6.67
6.96
6.96
7.10
7.10
8.25
6.17
6.17
6.44
6.44
6.57
6.57
7.63
6.97
6.97
6.68
6.68
6.54
6.54
6.04
6.04
STACKING STANDARD BANANA PLUG EACH END — FIG. 2
18 AWG. 5000VDC, 15A, +55°C.
●
●
Fig. 4
●
●
●
●
●
●
●
●
Fig. 7
Fig. 8
Breakouts convert coaxial cable with BNC male or female connectors to test cable with choice of one black and one red
clips or plugs. Tarnish-resistant, plated-brass BNC with gold-plated copper contact. Overall length: 7.0″. Mfg. part nos.
4969, 4970, 3221, 3957 and 3073 rated 500Vrms; mfg. part nos. 3788 and 3789 rated 300Vrms; mfg. part nos.
5188, 5305 and 2630 rated 150Vrms; mfg. part no. 2631 rated 45Vrms.
Mfg. Part No. Fig.
1
● 3788
...
● 3789
2
● 5305
3
● 2630
3
● 2631
...
● 3221
4
● 3901
5
● 3073
6
● 4969
...
● 4970
7
● 3957
8
● 5188
Description
Female BNC to 2 Minigrabber™ Clips
Male BNC to 2 Minigrabber™ Clips
Female BNC to 2 SMD Grabber Clips
Female BNC to 2 Alligator Clips
Female BNC to 2 Minigator Clips
Female BNC to Stacking Pin Tip Plugs
Male BNC to Stacking Pin Tip Plugs
Female BNC to Stacking Banana Plugs
Female BNC with 20 AWG leads
Male BNC with 20 AWG leads
Male BNC to Multistacking Banana Plug
Female BNC to Micrograbber™ Clips
Stock No.
35F1061
35F975
46F2415
10M4222
10M4223
10M4236
77B2426
10M4233
94F1506
94F1507
94F1581
90F1316
●
●
●
●
Price Each
1-24 25-49 50-99
14.46 13.02 12.59
17.82 16.06 15.52
19.72 17.77 17.17
14.90 13.42 12.97
14.90 13.42 12.97
17.98 16.20 15.66
22.37 20.15 19.48
13.88 12.50 12.08
9.77
8.80
8.51
13.44 12.11 11.70
20.16 18.17 17.56
18.96 17.08 16.51
●
●
●
●
●
●
●
●
●
●
●
●
●
●
(8975)
●
B-4-0
B-4-2
B-8-0
B-8-2
B-12-0
B-12-2
B-12-6
B-12-9
B-18-0
B-18-2
B-18-6
B-18-9
B-24-0
B-24-2
B-24-8
B-36-0
B-36-2
B-36-8
B-48-4
B-60-9
B-72-3
B-72-4
B-72-5
B-72-6
B-72-8
B-72-9
2948-12-0
2948-36-0
2948-36-2
4″
4″
8″
8″
12″
12″
12″
12″
18″
18″
18″
18″
24″
24″
24″
36″
36″
36″
48″
60″
72″
72″
72″
72″
72″
72″
12″
36″
36″
Black
Red
Black
Red
Black
Red
Blue
White
Black
Red
Blue
White
Black
Red
Gray
Black
Red
Gray
Yellow
White
Orange
Yellow
Green
Blue
Gray
White
Black
Black
Red
06M6942
06M6943
06M6951
06M6952
34F880
34F879
96F7092
84F885
34F882
34F881
70B7185
94F284
34F849
34F848
96B8428
34F851
34F850
70B4665
91B3621
92B0840
50B6691
50B6692
50B6693
50B6694
50B6696
50B6697
90B3695
10M4226
10M4227
INSULATED ALLIGATOR CLIP EACH END — FIG. 3
18 AWG. 150V, 5A, +50°C.
●
●
●
●
●
●
●
AL-B-12-0
AL-B-12-2
AL-B-24-0
AL-B-24-2
AL-B-36-0
AL-B-36-2
AL-B-60-2
12″
12″
24″
24″
36″
36″
5ft
Black
Red
Black
Red
Black
Red
Red
MINIGATOR CLIP TO STACKING BANANA PLUG — FIG. 4
20 AWG. 45V, 5A, +50°C.
(148859)
●
●
3220-36-0
3220-36-2
36″
36″
Black
Red
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2235))
06M6923
06M6924
06M6925
06M6926
06M6927
06M6928
78B1539
C-2235
M-2235
Y-2235
B-2235
USEXP1-2235
10M4234
10M4235
2235
9
ND3% BASE1
XXXX3836-2236-1-Page 2236 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:24 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
TEST LEADS & ACCESSORIES
MINIGRABBER® TEST
CLIPS AND KITS
PATCH CORDS (CONT.)
Price Each
Mfg. Part No.
L
18 AWG. 5000VDC, 15A, +55°C.
24″
● 4702-24-0
24″
● 4702-24-2
36″
● 4702-36-0
36″
● 4702-36-2
Color
Stock No.
Black
Red
Black
Red
10M4345
10M4346
10M4347
10M4348
1-24
25-49
50-99
8.44
8.44
8.57
8.57
8.25
8.25
8.39
8.39
8.80
8.80
8.95
8.95
100249
7.63
7.63
7.76
7.76
EXTENSION STACKING BANANA PLUG EACH END — FIG. 6
Insulates hot leads. 0.144″ (3.66) O.D. 18 AWG. 5000VDC, 15A, +55°C. Other sizes available, go online or call.
●
●
●
●
36″
36″
60″
60″
HB-36-0
HB-36-2
HB-60-0
HB-60-2
Black
Red
Black
Red
06M7324
06M7325
06M7328
81F4626
13.50
13.50
13.08
13.31
12.94
12.94
11.98
12.75
12.66
12.66
11.10
12.48
11.71
11.71
10.28
11.54
3925
4723
Feature plunger-action clip with gold-plated contact hook that attaches to component leads, terminals. No sharp teeth to
damage wires. Fingertip operation. 0.625″ (15.88) diameter. +102°C.
MFG. PART NOS. 3925 AND 4555 MINIGRABBER TEST CLIPS
Rated 3000WVDC, 12A, 2.54″ (64.52)L, +102°C.
Mfg. Part No.
● 3925-0*
● 3925-2*
● 3925-4*
● 3925-5*
● 3925-9*
● 4555-0*
● 4555-2*
(8971)
BANANA PLUGS/DUAL
BANANA PLUGS
Color
Black
Red
Yellow
Green
White
Black
Red
Wire O.D.
0.090″ (2.29)
0.090″ (2.29)
0.090″ (2.29)
0.090″ (2.29)
0.090″ (2.29)
0.144″ (3.66)
0.144″ (3.66)
Stock No.
73C4848
20H0137
30F1406
94F1578
94F1580
48F5004
48F5005
1-24
18.84
18.84
18.84
18.84
18.84
20.63
20.63
Price Each
25-49
50-99
17.84
16.84
17.84
16.84
17.84
16.84
17.84
16.84
17.84
16.84
19.53
18.43
19.53
18.43
100+
16.04
16.04
16.04
16.04
16.04
17.56
17.56
*Sold in packages of 10
MFG. PART NO. 3925 MINIGRABBER TEST CLIP KITS
Mfg. Part No.
Description
Stock No.
1 Black, 1 Red Mfg. part no. 3925 Clip 46F2201
● 4176-02
10 Mfg. part no. 3925 Clips, 1 each:
90F2174
● 5522
Black, Red, Brown, Orange, Yellow,
Green, Blue, Violet, Gray, White
Rating: 300Vrms +50°C.
Mfg. Part No.
● 1368-A-18
● 1368-A-36
● 1368-A-48
● 1368-A-60
L
18″
36″
48″
60″
Stock No.
10M4167
10M4168
89F403
94F294
Price Each
10-24
25-49
32.18
31.54
32.18
31.54
32.18
31.54
32.18
31.54
1-9
36.51
36.51
36.51
36.51
50+
30.74
30.74
30.74
30.74
Price Each
1-24 25-49 50-99 100+
4.40
4.17
3.94
3.75
21.25 20.12 18.99 18.08
MFG. PART NO. 4723 MINIGRABBER TEST CLIPS WITH BANANA JACK
Nickel-plate brass standard banana jack in plunger directly connects test clip to banana plug patch cord. 45VAC, 5A.
+102°C.
(8912)
Mfg. Part No.
● 4723-0
● 4723-2
TEST LEAD ACCESSORIES
Color
Black
Red
Stock No.
46F2380
46F2381
1-24
5.68
5.68
Price Each
25-49
50-99
5.38
5.08
5.38
5.08
100+
4.84
4.84
(8964)
File patch cords and cable assemblies for easy
selection. Mount on any vertical surface. Cold
rolled steel with baked enamel finish.
Mfg. Part No.
1508
4408
2708
Color
Orange
Black
Blue
Fits Cable
0.210″
0.320″
0.450″
MICROGRABBER®
TEST CLIPS AND KIT
No. of Slots
14
10
9
Stock No.
34F956
34F1017
34F957
1-24
16.15
13.20
16.17
Price Each
25-49
14.63
11.96
14.65
50-99
14.15
11.57
14.17
4233
(8976)
TEST CLIP-TO-TEST
CLIP PATCH CORD KITS
5790
4521
MFG. PART NO. 4233 MICROGRABBER TEST CLIPS AND KIT
Rated 1000WVDC, 3A, +102°C. Accept 0.090″ (2.29) maximum wire O.D. 1.71″ (43.43)L.
Each kit contains ten patch cords, 24″ (0.610M) long, with grabber test clips on each end of patch cord. Patch cords
available in ten colors: black, red, brown, orange, yellow, green, blue, violet, gray and white. Mfg. part no. 5523 rated
300V, 5A; mfg. part nos. 5525 and 5521 rated 150V, 0.5A.
9
Mfg. Part No.
● 5523
● 5525
● 5521
Description
Minigrabber® Type 3781-24
Micrograbber® Type 4613-24
SMD Grabber® Type 5301-24
Stock No.
90F2175
90F2173
90F2333
1-4
51.91
82.01
107.51
Price Each
5-9
49.04
77.47
101.56
Mfg. Part No.
● 4233-0*
● 4233-2*
Description
Black Test Clip
Red Test Clip
Stock No.
48F5003
13H6565
1-24
22.04
22.04
Price Each
25-49
50-99
20.25
18.23
20.25
18.23
100+
17.39
17.39
*Sold in Package of 10; +Each.
MFG. PART NO. 4521 MICROGRABBER TEST CLIPS WITH 0.025″ SQUARE PIN
Have 0.025″ (0.635) square pin within 0.15″ (3.81) square access hole. 1.73″ (43.94) long. Rated 45VAC, 3A, +102°C.
10+
45.21
71.43
93.63
Mfg. Part No.
● 4521-0
● 4521-2
Description
Black Test Clip
Red Test Clip
Stock No.
35F1691
35F1692
1-24
3.85
3.85
Price Each
25-49
50-99
3.54
3.19
3.54
3.19
100+
3.04
3.04
(9039)
MFG. PART NO. 5790 ROTATING MICROGRABBER TEST CLIPS
Ideal for testing surface mount devices. High-density leads have 0.050″ (1.27) spacing and 0.004″ (0.101) gauge wires.
2 access entries with 0.025″ (0.635) square pins.
Mfg. Part No.
● 5790-0
● 5790-2
Description
Black Test Clip
Red Test Clip
(8966)
(148860)
2236
STIBOINFO((NEWARK_MAIN_C124_2236))
C-2236
M-2236
Y-2236
B-2236
USEXP1-2236
Stock No.
95F1351
95F1352
1-24
7.92
7.92
Price Each
25-49
50-99
7.28
6.55
7.28
6.55
100+
6.25
6.25
ND3% BASE1
XXXX3837-2237-1-Page 2237 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:24 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
TEST LEADS & ACCESSORIES
TEST LEAD ACCESSORIES
LOW EMF PATCH CORDS (CONT.)
Mfg. Part No.
5291A-60-0
● 5291A-60-2
● 5295-36-0
● 5295-36-2
●
Fig. 1
Fig. 2
Description
Retractable Sheath Banana, Black
Retractable Sheath Banana, Red
Retractable Sheath Banana Plug to Spade Lug, Black
Retractable Sheath Banana Plug to Spade Lug, Red
Lgth.
(in.) Stock No.
5
95B0991
5
95B0997
3
94F5215
3
94F5216
Price
Each
1-24
19.20
19.20
17.87
17.87
(84757)
Fig. 4
Fig. 3
CABLE ASSEMBLIES
Fig. 5
MOLDED PVC STRESS RELIEF BOOTS
Protects cable 0.185-0.2.00″ (4.70-5.08) outer diameter except (*) which fit 0.237-0.247″ (6.02-6.27) outer diameter.
Mfg. Part No.
● 5155-0+
● 5156-0+
● 5076-0*
Fig.
1
1
2
Color
Black
Black
Black
Fits Cable
RG 58, 141
RG 59, 62, 210
RG 58, 141
Price Each
1-24
8.99
8.79
4.47
Stock No.
48F5006
20H0126
44F5342
Fig. 1
Fig. 2
* Each; +Sold in Packages of 10.
CONNECTOR TEST ADAPTERS
For rapid testing of hard-to-reach contacts of multi-pin and socket rack or panel connectors. 2500 WVDC, +50°C.
Mfg. Part No.
● 4690-0
● 4690-2
● 4691-0
● 4691-2
● 3560-0
● 3560-2
● 3561-0
● 3561-2
● 3562-0
● 3562-2
● 3563-0
● 3563-2
● 3564-0
● 3564-2
● 3565-0
● 3565-2
Fig.
3
3
4
4
3
3
4
4
3
3
4
4
3
3
4
4
Description
Black Socket
Red Socket
Black Pin
Red Pin
Black Socket
Red Socket
Black Pin
Red Pin
Black Socket
Red Socket
Black Pin
Red Pin
Black Socket
Red Socket
Black Pin
Red Pin
Contact
Diameter
0.030″
0.030″
0.030″
0.030″
0.040″
0.040″
0.040″
0.040″
0.063″
0.063″
0.063″
0.063″
0.093″
0.093″
0.093″
0.093″
Amps
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
13.0
13.0
13.0
13.0
23.0
23.0
23.0
23.0
Stock No.
81F4641
81F4649
81F4642
81F4650
81F4643
81F4651
81F4644
81F4652
81F4645
81F4653
81F4646
81F4654
81F4647
81F4655
81F4648
81F4656
Price Each
1-24
4.49
4.49
4.49
4.49
4.38
4.38
4.38
4.38
4.38
4.38
4.38
4.38
6.87
6.87
4.49
4.49
Fig
5
5
Mfg. Part No.
● 4935-BB-24
● 4935-BB-48
● 4935-BB-60
●
6383-0
6383-2
...
...
Fig. 5
Cable Length (in.)
24
48
60
Stock No.
77B4084
10M4376
10M4377
1-4
59.48
59.48
59.48
Price Each
5-9
55.44
55.44
55.44
10+
51.40
51.40
51.40
TYPE ’N’ MALE, EACH END 50 OHM CABLE — FIG. 2
●
●
36
60
1658-T-36
1658-T-60
77B2158
77B2160
80.23
106.09
74.79
98.89
69.34
91.69
20.18
18.81
17.44
10M4160
45.18
42.11
39.04
94F5207
123.70
115.30
106.91
78B1833
78B1834
123.70
131.63
115.30
122.70
106.91
113.76
MULTI-STACKING DOUBLE BANANA PLUG, ONE END ONLY - FIG 3
●
Description
4mm Banana Plug for 18AWG Wire, Black
4mm Banana Plug for 18AWG Wire, Red
Stock No.
99F7945
02B1440
Price Each
1-24
4.84
4.84
60
1326-A-60
96F7101
User Installed In-Line Banana Plug, Black
User Installed In-Line Banana Plug, Red
32H5245
57H6847
26.48
26.48
User Installed In-Line Banana Jack, Black
35H7046
28.09
●
36
1167-36
TRIAXIAL 3 LUG MALE TRIAXIAL CABLE — FIG 5
●
36
5223-36
TRIAXIAL 2 LUG MALE TRIAXIAL CABLE — FIG 5
IN-LINE BANANA PLUG
●
Fig. 4
TWO CONDUCTOR SHIELDED BALANCED LINE — FIG 4
RETRACTABLE SLEEVE BANANA PLUGS
Mfg. Part No.
● 122505A
● 122506A
Fig. 3
BNC MALE TO SMA MALE INSULATED CABLE — FIG. 1
Rating: 335Vrms. Cable Type: RG316/U. 0.98″ O.D.
●
●
36
60
5054-36
5054-60
(8969)
IN-LINE BANANA JACK
●
6384-0
...
(43070)
TRUE 75Ω BNC MALE CABLES
• BNC Connectors are Perfectly Matched to
75Ω Impedance for Superior VSWR and
Return Loss Performance
• Ideal for Digital Video and
Telecommunications Applications
• Cable Type: High-Flex, Multistrand Center
Conductor, RG59 Type, Black
LOW EMF PATCH CORDS
9
Rating: 500Vrms +50°C.
1693-36-0
5291A-12-2
●
All products have 12 AWG wire. Spade Lug are gold plated Electrolytic Tough Pitch (ETP) 110 Copper Alloy, 1⁄2 hard.
Banana plug bodies are gold plated tellurium copper; Spring are gold-plated beryllium copper. Rated up to 1000V per
IEC1010-2-031, 7A, +131°F (+55°C). The 1693 and 1756 series Rating: Hands free testing in controlled voltage
environment: 2000 Vdc; Not intended for hand held use at voltages above 33 Vrms/70 Vdc, 20A, +131°F (+55°C) max.
The 5291 series Rating: up to 1000V per IEC1010-2-031, 7A, +131°F (+55°C). The 5295 series Rating: Hands free
testing in controlled voltage environment up to 1000V; Not intended for hand held use at voltages above 33 Vrms/70 Vdc,
7A, +131°F (+55°C) max.
Mfg. Part No.
● 1693-36-0
● 1693-36-2
● 1693-60-0
● 1693-60-2
● 1756-48
Description
Spade Lug Patch Cord, Black
Spade Lug Patch Cord, Red
Spade Lug Patch Cord, Black
Spade Lug Patch Cord, Red
Shielded Spade Lug Patch Cord
Mfg. Part No.
6510-V-12-0
● 6510-V-24-0
● 6510-V-36-0
● 6510-V-48-0
● 6510-V-60-0
5295-36-0
Lgth.
(in.)
3
3
5
5
4
Stock No.
51B931
51B932
98F961
94F296
77B1776
Cable Length
12″
24″
36″
48″
60″
(68987)
Price
Each
1-24
19.20
19.20
18.62
18.62
47.11
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2237))
C-2237
Stock No.
30C5088
30C5089
30C5090
30C5091
30C5092
Price Each
1-9
24.42
24.42
24.42
29.37
29.37
M-2237
Y-2237
B-2237
USEXP1-2237
2237
ND3% BASE1
XXXX3838-2238-1-Page 2238 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:25 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
TEST LEADS & ACCESSORIES
BNC MALE EACH END
CABLE ASSEMBLIES
KELVIN CLIPS
Molded stress relief boot. 2249-C series: ideal for most
test and measurement applications, RG58C/U, 50Ω;
2249-E series: ideal for use with TV, video and LAN
signals, RG59B/U, 75Ω; 4964 series: ideal for low power,
low frequency measurements.
Mfg. Part No.
2249-C-6
● 2249-C-12
● 2249-C-24
● 2249-C-36
● 2249-C-48
● 2249-C-60
● 2249-C-72
● 2249-C-120
● 2249-C-180
● 2249-C-300
● 2249-C-600
● 2249-E-12
● 2249-E-24
● 2249-E-36
● 2249-E-48
● 2249-E-60
● 2249-E-72
● 2249-E-120
● 2249-E-180
● 2249-E-240
● 2249-E-300
● 4964-SS-24
● 4964-SS-36
● 4964-SS-48
● 4964-SS-60
● 4964-SS-240
●
Length (in)
6
12
24
36
48
60
72
120
180
300
600
12
24
36
48
60
72
120
180
240
300
24
36
48
60
20
1-9
19.94
19.94
19.94
19.94
25.07
25.07
25.07
29.90
36.19
49.27
72.37
21.36
21.36
21.36
25.20
25.20
25.07
30.20
36.19
42.74
49.41
26.24
27.01
32.48
31.92
48.37
Stock No.
91B6405
35F1072
35F1073
35F1074
35F1075
35F1076
89F333
89F332
89F331
88F6303
88F6302
35F1077
35F1078
35F1079
35F1080
35F1081
50F1471
14C7842
98F7840
51B934
97B2360
89F334
89F328
89F329
89F330
50B6750
Price Each
10-24
25-49
17.56
17.38
17.56
17.38
17.56
17.38
17.56
17.38
22.07
21.85
22.07
21.85
22.07
21.85
26.33
26.07
31.86
31.54
43.39
42.95
63.72
63.08
18.81
18.62
18.81
18.62
18.81
18.62
22.19
21.97
22.19
21.97
22.07
21.85
26.59
26.32
31.86
31.54
37.63
37.26
43.51
43.07
23.10
22.87
23.78
23.55
28.60
28.31
28.11
27.83
42.59
42.16
Accurate four wire measurements. 24″ (0.65) long cable features two gold-plated Kelvin clips for low contact resistance,
and four color-coded gold-plated banana plugs. Minigator to banana plug lead is included for grounding or guarding.
Rated: 30VAC/70VDC.
50+
16.76
16.76
16.76
16.76
21.08
21.08
21.08
25.14
30.42
41.42
60.84
17.96
17.96
17.96
21.19
21.19
21.08
25.39
30.42
35.93
41.54
22.06
22.71
27.31
26.84
40.66
Mfg. Part No.
● 5940
1
4276-C-12
94F5162
49.09
43.23
42.79
41.27
Stock No.
95F1364
Price Each
1-4
217.42
(8984)
SOIC TEST CLIPS
Spring-loaded clips for testing SOIC
and SOJ small outline ICs.
8-, 14-, 16-, 20-, 24-, AND 28- PIN SOIC CLIPS—BODY WIDTHS 0.15″ – 0.3″
Mfg. Part No.
● 5250
● 5251
● 5252
● 5253
● 5254
● 5437
Pins
8
14
16
20
24
28
Price Each
1-24
25-49
14.24
12.98
14.24
12.98
16.01
14.60
18.55
16.92
27.04
24.66
32.85
29.96
Stock No.
46F2416
46F2417
46F2418
46F2419
46F2420
89F422
32-, 40-, AND 44-PIN SOIC/SOJ CLIPS—BODY WIDTHS 0.30″ – 0.60″
Mfg. Part No.
● 6107
● 6108
● 6109
BNC RIGHT ANGLE EACH END CABLE ASSEMBLIES
●
Description
Kelvin Clips Set for 4-Wire Resistive Measurement
Dimensions
A
B
0.870″
0.870″
1.070″
1.070″
1.170″
1.170″
Pins
32
40
44
Stock No.
91F2996
91F2997
91F2998
Price Each
1-24
25-49
45.79
41.76
54.30
49.52
57.16
52.13
(16327)
(8905)
SHEATHED 4mm BANANA
JUMPER TEST LEAD SETS
BNC MALE CABLE
ASSEMBLIES
•
•
•
•
Nickel-plated brass plugs
Nickel-plated beryllium copper spring
Polypropylene insulator
Silicone wire insulation, O.D. 0.146”
(3.7mm)
• 18 AWG wire
BNC male/BNC male. 50Ω. 500Vrms,
+80°C. (*)Economy style.
BNC-C
Mfg. Part No.
● BNC-C-18
● BNC-C-24
● BNC-C-36
● BNC-C-48
● BNC-C-60
● 5697-12*
● 5697-24*
● 5697-36*
● 5697-48*
● 5697-60*
● 5697-72*
● 5697-120*
9
L
18″
24″
36″
48″
60″
12″
24″
36″
48″
60″
72″
120″
Stock No.
30F1417
34F842
34F843
44F2636
44F2638
50F1529
50F1530
50F1531
50F1532
50F1533
50F1534
50F1535
1-24
23.38
23.38
23.38
26.41
26.41
10.95
10.95
10.95
15.83
15.83
15.83
19.19
Price Each
25-49
50-99
21.04
20.42
21.04
20.42
21.04
20.42
23.76
23.06
23.76
23.06
9.85
9.56
9.85
9.56
9.85
9.56
14.24
13.82
14.24
13.82
14.24
13.82
17.27
16.76
100+
19.81
19.81
19.81
22.37
22.37
9.28
9.28
9.28
13.41
13.41
13.41
16.26
Each jumper test lead set includes one sheathed 4mm banana plug to sheathed 4mm banana plug test lead, and one
sheathed 4mm banana plug to sheathed 4mm banana jack patch cord. Plug and housing are molded directly to the
cable in an intergral one piece design and wire is double crimped. Multi-leaf banana spring is beryllium copper,
nickel-plated for extended insertion cycle life and low contact resistance.High strand count silicone insulated wire offers
flexibility and high temperature resistance. Can be used with terminal jacks on pages 2233-2234.
(8906)
KELVIN PROBES
• Patented Design for HighPrecision Rapid Testing
• Easily Move from One Test Point
to Another for Rapid Readings
• Rating: 30VAC/70VDC
• For Use with 4-Wire Kelvin
Meters
Designed for use with 4- and 2-wire measurements.
Mfg. Part No.
6303
Description
Kelvin Probes
Stock No.
03C3869
Price Each
1-4
119.07
(68955)
Mfg. Part No.
73087-6-0
73087-6-2
73087-6-4
73087-6-6
73087-9-4
73087-12-0
73087-12-2
73087-12-4
73087-12-6
73087-20-4
73087-24-0
73087-24-2
73087-24-4
73087-24-6
73087-36-0
73087-36-2
73087-36-4
73087-36-6
73087-72-0
73087-72-2
73087-72-4
73087-72-6
Length
(in.)
6
6
6
6
9
12
12
12
12
20
24
24
24
24
36
36
36
36
72
72
72
72
2238
STIBOINFO((NEWARK_MAIN_C124_2238))
C-2238
M-2238
Y-2238
B-2238
USEXP1-2238
Color
Black
Red
Yellow
Blue
Yellow
Black
Red
Yellow
Blue
Yellow
Black
Red
Yellow
Blue
Black
Red
Yellow
Blue
Black
Red
Yellow
Blue
Stock No.
10R1515
10R1516
10R1517
10R1518
10R1523
10R1500
10R1501
10R1502
10R1503
10R1505
10R1507
10R1508
10R1509
10R1510
10R1511
10R1512
10R1513
10R1514
10R1519
10R1520
10R1521
10R1522
Price Each
Each
17.11
17.11
17.11
17.11
17.49
17.83
17.83
17.83
17.83
18.68
19.10
19.10
19.10
19.10
20.37
20.37
20.37
20.37
24.19
24.19
24.19
24.19
ND3% BASE1
XXXX3839-2239-1-Page 2239 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:25 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
TEST LEADS & ACCESSORIES
SILICONE PATCH CORDS
SHEATHED 4mm BANANA JUMPER TEST LEAD SETS (CONT.)
Length
(in.)
150
210
Mfg. Part No.
73087-150-4
73087-210-4
Color
Yellow
Yellow
Stock No.
10R1504
10R1506
Price Each
Each
32.47
38.84
(148550)
4mm stacking banana plugs on each end of
highly flexible silicone-jacketed wire. Rated
12A/1200V. Choice of 2 colors. CE
compliant.
76-008
MICRO-SMD GRABBERS
Mfg. Part No.
76-008
76-009
76-010
76-011
Use with PQFP, SOIC, TSOP and SSOP
packages. Thin body allows an unlimited
number of clips to be stacked side by
side. Maximum frequency is 100MHz.
Profile Height: 14 mm (0.55″). Rated for
hands free testing in controlled environment up to 45V. Supplied with female
to male flying leads.
Color
Red
Black
Red
Black
Stock No.
16F7680
16F7681
16F7682
16F7683
Price Each
1-9
6.34
6.34
7.53
7.53
(5958)
6311 and 6351
Mfg. Part No.
● 6351
Length
40″
40″
60″
60″
Description
Long Tip (8mm), 2 Colors
●
6352
Long Tip (13mm), 2 Colors
●
6353
Short Tip (2mm), 2 Colors
Price Each
Lead
Number
Pitch
of Units Stock No.
1-5
0.85mm to 0.2mm
10
91B7435
514.95
(0.03″ to 0.01″)
1.25mm to 0.3mm
10
96B3362
514.95
(0.05″ to 0.01″)
1.25mm to 0.3mm
10
30K7344
530.39
(0.05″ to 0.01″)
(84767)
SHEATHED STACKING
BANANA PLUGS
76-006
Fully-insulated plug and jack. When assembled meets IEC1010 CAT III 1000V, 36A safety standards. Choice of 2 colors.
Allen wrench required for assembly, ordered separately.
Price Each
1-24
Mfg. Part No.
Color
Stock No.
Red
16F7678
2.58
76-006
16F7679
2.58
Black
76-007
(5957)
BASIC AND DELUXE TEST LEAD ACCESSORY KITS
76-081
• 60″ Red and Black PVC Insulated
Leads 1000V CAT III 12A
• Probe Bodies with Replaceable Tips
1000V CAT III 36A
• Flexible Pincer Clip 1000V CAT III 6A
Mfg. part no. 76-082 contains everything in
76-081 but also includes fully-insulated IEC alligator clips, in black and red; insulated banana
plug adapters in black and red: insulated spade
lug adapters, in black and red; and spring-loaded
tip probes, in black and red.
Mfg. Part No.
76-081
76-082
Description
Basic Test Lead Accessory Kit
Deluxe Test Lead Accessory Kit
RETRACTABLE STACKING
PLUG-TO- PLUG TEST LEADS
• Rated 12A, 750V
• Resistance <15mohms
4mm stacking banana plugs with clear retractable safety sheath. Flexible PVC jacketed wire.
Nickel plated contacts. Choice of 2 colors.
Mfg. Part No.
76-092
76-093
76-120
76-122
76-082
Stock No.
16F7740
16F7741
Price Each
1-4
35.31
68.53
Length
20″
20″
40″
40″
Color
Black
Red
Black
Red
Stock No.
84N2134
84N2135
84N2157
84N2158
Price Each
1-24
6.06
6.06
8.13
7.36
(19633)
(5968)
MALE BNC ADAPTERTO-BINDING POSTS
TEST LEAD SET
• Low-Cost Test Lead Set for
DMMs
• 2mm Tip Probe
• 4mm Sheathed Bannana Plugs
• Alligator Clip Finger Guards
• 1000V CAT III, 10A
• Rated 3A, 500VRMS
BNC male connector to 4mm binding
posts. Black thermoplastic body.
Black and red binding post insulators.
Flexible PVC jacketed wire measures 1.2M long (1-black, 1-red). Right-angle sheathed DMM bananna plugs. Includes
gold-plated, phosphor bronze contact alligator clips with finger guards for improved conductivity and retention. CE
compliant.
Mfg. Part No.
76-108A
Description
Test Lead Set
Stock No.
09H0918
Price Each
1-9
7.25
Mfg. Part No.
76-005
Description
Male BNC Adapter-To-Binding Posts
Stock No.
16F7677
Price Each
1-9
9.15
(32171)
UNSHIELDED
JUMPERS
(32172)
TEST CLIP
LEAD KIT
76-004A
Kit comprised of 8 patch cords: 2 black, 2 red, 1 green, 1 yellow, 1 blue, and 1 white. Every patch cord has miniature
hook clips on each end of 50 cm long, PVC wire. 20VAC/60VDC; 2A max. Sold in sets of 8 cords.
Mfg. Part No.
76-004A
Description
Test Clip Lead Kit
Stock No.
12M5887
Price Each
1-24
33.40
(5955)
SPC 12049
Unshielded jumpers available with standard or mini alligator clip on each end. Feature cadmium-plated steel clips with
vinyl plastic boots. All leads are 18 AWG, 300V insulated wire.
Price Each
Mfg. Part No.
Clip
Length
Color
Stock No.
1-9
Standard
1′
Red
95C0317
6.07
● SPC12049
Standard
1′
Black
95C0318
5.99
● SPC12050
Standard
3′
Red
95C0319
6.22
● SPC12051
Standard
3′
Black
95C0320
6.22
● SPC12052
Standard
5′
Red
95C0321
7.07
● SPC12053
Standard
5′
Black
95C0324
7.07
● SPC12056
Mini
1′
Red
95C0322
4.54
● SPC12054
Mini
1′
Black
95C0323
4.69
● SPC12055
Mini
3′
Red
95C0325
6.22
● SPC12057
Mini
3′
Black
95C0326
5.61
● SPC12058
(74266)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2239))
C-2239
M-2239
Y-2239
B-2239
USEXP1-2239
2239
9
ND3% BASE1
XXXX3840-2240-1-Page 2240 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:25 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
TEST LEADS & ACCESSORIES
INSULATED ALLIGATOR
AND MINI-ALLIGATOR
LEAD KITS
02 SERIES TEST CLIPS
BU-00287
Econo-Line lead kits offer skin-tight flexible insulator. All kits have multiple colors to simplify identification. Mfg. part
nos. BU-00285 and BU-00287 include 2 each of black, red, yellow, green, and white. Mfg. part no. BU-00286 includes
1 each of black, red, yellow, green and white. 22 AWG for all kits. Jaw openings: mfg. part no. BU-00285: 1⁄4″ (6.4mm),
mfg. part no. BU-00286: 7⁄16″ (11.1mm) and mfg. part no. BU-00287: 5⁄16″ (7.9mm) max. Mfg. part no. BU-00285 are
sold in packages of 10.
Mfg. Part No.
BU-00286
BU-00285
BU-00287
Description
Alligator
Mini-Alligator
Alligator
Length
12″
18″
18″
Price Each
1-24
25-49
5.76
5.39
6.11
5.76
8.64
8.09
Stock No.
83F8069
12P9348
83F8070
(39470)
Mfg. part no. 02-0 is standard size, #8-32 UNC-2A threaded stud clip. Fits panel up to 0.25″ (6.35) thick; 0.550″ (13.97)
wide, 1.25″ (31.75) above board. Mfg. part no. 02-60 is standard size, studless clip with extruded hole tapped to
receive #8-32 UNC-2A threaded screw (not supplied) to adjust tension; 0.576″ (14.63) wide, 1.144″ (29.06) above
board. Mfg. part no. 02-20 is miniature size, #6-32 UNC-2A threaded stud clip. Fits panel to 0.25″ (6.35) thick; 0.406″
(10.31) wide, 0.719″ (18.26) above board. Mfg. part no. 02-41 is ultraminiature size single-unit clip, 0.406″ (10.31)
above board; requires 0.312″ (7.92) x 0.125″ (3.18) panel area. Mfg. part no. 02-42 is ultraminiature size, double-unit
clip which requires 0.25″ (6.35) x 0.125″ (3.18) panel area.
Mfg. Part No.
● 02-0
● 02-60
● 02-20
● 02-41
● 02-42
FULLY INSULATED
ALLIGATOR CLIPS
Mounting
Standard Thread Stud
Studless
Miniature Thread Stud
Ultraminiature Single
Ultraminiature Double
Stock No.
28F550
57F2651
28F414
28F624
28F625
Price Each
1-24
25-49
3.08
2.76
3.14
2.81
3.48
3.12
3.48
3.12
3.72
3.33
(5061)
BU-652-0
BU-651-0
BU-654-0
Fully-insulated alligator clips that accept either unshrouded or retractable 4mm banana plugs. Available in 2 colors.
BU-651 series is 2.24″ (57mm) long. BU-652 series is 3.24″ (82mm) long. Both are IEC 1010 compliant 300V CAT II,
150V CAT III. BU-654 series is 3.19″ (81mm) long, IEC 1010 compliant 1000V CAT II, 600V CAT III.
Mfg. Part No.
BU-651-0
BU-651-2
Length
2.24″ (57)
2.24″ (57)
Color
Black
Red
Current
10A
10A
Jaw Opening
0.27″
0.27″
Stock No.
93B1389
93B1392
Price Each
1001-99
499
5.42
5.15
5.42
5.15
3.24″ (82)
3.24″ (82)
Black
Red
20A
20A
0.27″
0.27″
95B8434
95B8439
13.18
13.55
Length
3.19″ (81)
3.19″ (81)
Color
Black
Red
Current
20A
20A
Jaw Opening
1.00″
1.00″
Stock No.
50B5848
50B5849
Price Each
1-4
5-9
11.06
10.44
11.06
10.44
ALLIGATOR CLIPS
T115S
T154
T160
SAFETY
BU-652-0
BU-652-2
12.33
12.71
FLANGED
Mfg. Part No.
● BU-654-0
● BU-654-2
T641 CPR, T641CPB
T160S
T510S
All are steel with nickel plating. Suffix S in mfg. part no. indicates clip with screw.
(49976)
ALLIGATOR CLIPS
BU-3030
BU-3056
Mfg. Part No.
T115SR
T115SB
T154
T641CPR
T641CPB
Amp
10
10
5
50
50
Clip
Length
2.3″
2.3″
1.2″
3.0″
3.0″
Handle
Insulat.
Red
Black
None
Red
Black
Max. Jaw
Opening
0.32″
0.32″
0.24″
0.87″
0.87″
Pkg.
of
Each
Each
Each
Each
Each
Stock No.
90F7186
90F7187
90F7188
90F7189
90F7190
Mfg. Part No.
T160
T160S
T510S
Amp
10
10
10
Clip
Length
2.0″
2.0″
2.0″
Handle
Insulat.
None
None
None
Max. Jaw
Opening
0.32″
0.32″
0.43″
Pkg.
of
500
500
500
Stock No.
42F2393
42F2394
42F2398
Price Each
1-49
0.48
0.48
0.17
0.62
0.62
Price Each
1-4
90.85
70.37
241.55
(5478)
BU-3131
9
BU-3156
BU-3070
BNC MALE BOTH ENDS
BU-5031
BU-5030
Mfg. part no. BU-3030 insulated alligator clip both ends.
Mfg. part no. BU-3056 nickel-plated steel, insulated alligator clips with 2″ (51mm) positive lead and 7″ (178mm)
negative lead. With molded Y-block to insulated BNC Male.
Mfg. part no. BU-3070 insulated alligator clips, positive and negative with 3″ (76.2mm) and 8″ (203.2mm), respectively
lead wires with molded Y-block to stackable double banana plug.
Mfg. part no. BU-3131 insulated mini-alligator clip, both ends.
Mfg. part no. BU-5030 insulated alligator clips, positive and negative with 3″ (76.2mm and 8″ (203.2mm), respectively
lead wires with molded Y-block to BNC Male.
Mfg. part no. BU-5031 insulated mini-alligator clips, positive and negative with 3″ (76.2mm) and 8″ (203.2mm),
respectively lead wires with molded Y-block to BNC Male.
Mfg. part nos. ending with -0 are black, -2 are red.
Mfg. Part No.
BU-3030-A-24-0
BU-3030A-24-2
BU-3131-A-24-0
BU-3131-A-24-2
BU-3056-C-24-0
BU-3070-C-24-0
BU-5030-C-24-0
BU-5031-C-24-0
Length
24’’
24’’
24’’
24’’
24’’
24’’
24’’
24’’
Stock No.
89F463
89F464
89F467
89F468
16F3573
90F5728
90F5770
90F5771
1-24
11.00
11.00
10.60
10.60
26.22
50.45
30.25
30.25
Price Each
25-49
9.93
9.93
9.56
9.56
23.56
45.29
27.29
27.29
50-99
8.96
8.96
8.63
8.63
22.74
40.96
24.64
24.64
BU-5050
BU-5050-B series has a male BNC Connector at both ends. Gold-plated center contact and silver plated bodies. Coaxial
cable is shielded RG58C/U, MIL-C17F, 50 ohm.
Mfg. Part No.
BU-5050-B-12-0
BU-5050-B-24-0
BU-5050-B-36-0
BU-5050-B-60-0
Length
12″
24″
36″
60″
(9045)
(148861)
(9047)
2240
STIBOINFO((NEWARK_MAIN_C124_2240))
C-2240
M-2240
Y-2240
B-2240
USEXP1-2240
Stock No.
89F470
89F471
93F9739
16F3544
1-24
12.09
12.09
12.09
20.10
Price Each
25-49
11.32
11.32
11.32
18.87
50-99
9.88
9.88
9.88
16.03
ND3% BASE1
XXXX3841-2241-1-Page 2241 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:26 TS:TS date TS time
Find the Latest Technologies Online
HAND HELD TEST EQUIPMENT
TEST LEADS & ACCESSORIES
PLUNGER-TYPE TEST CLIPS
10A ALLIGATOR CLIPS
BU-20432
BU-20431
BU-20433
BU-20434
BU-20431 series insulated plunger hook clips with spring-loaded rigid hook for connection to terminals up to 0.059″
(1.5). IEC 1010 compliant rated 1000V 3A. BU-20432 series insulated hook clips with 2 fine steel wire hooks for
connection to small circuitry. Flexible shaft. IEC 1010 compliant rated 1000V 1A. BU-20434 series insulated plunger
jaw clips feature steel alligator clip type jaw that opens up to 0.78″ (19.91) when plunger is depressed. IEC 1010
compliant rated 1000V 15A. BU-20431 and BU-20432 series and BU-20433 series are UL listed and CE compliant.
Suffix 0: black, suffix 2: red.
Fig. 1
Fig. 2
Fig. 4
Fig. 5
Fig. 3
All clips are plated-steel except for mfg. part nos. BU-60CHS, BU-63C, BU-60C, BU-60CS and BU-70CS which are
burnished-copper, and mfg. part no. BU-65 which is plated-brass. Mfg. part nos. BU-60CHS and BU-60HS have
insulated acetate handle and 6-40 screw. Mfg. part no. BU-60HPR has 0.080″ I.D. barrel with insulated acetate handle.
Mfg. part nos. BU-63 and BU-63C have 2-piece flexible vinyl insulation and barrel takes wire or banana plug. Mfg. part
nos. BU-60 and BU60C have lip for soldering. Mfg. part nos. BU-60S and BU-60CS are the same as mfg. part nos.
BU-60 and BU60C except have a 6-40 screw. Mfg. part no. BU-60X is the same as BU-60 except solid stainless steel.
Mfg. part no. BU-60U has a U-shaped barrel. Mfg. part no. BU-60TBO has a threaded barrel. Mfg. part no. BU-70S is
rated 5A and has a 6-40 screw. Mfg. part no. BU-65 is an insulated, plug-on clip rated 30A, UL listed with jaws that
open to 3⁄4″. NOTE: Mfg. part nos. with suffix 0 are: black, suffix 2 are: red. Other colors available; go online or call
Newark.
Length
4.6″ (117.5)
5.3″ (133.4)
5.3″ (133.4)
7.3″ (184.1)
Black
Mfg. Part No.
BU-20431-0
BU-20432-0
BU-20434-0
BU-20433-0
Stock No.
93F9781
93F9783
93F9785
16F3557
Red
Mfg. Part No.
BU-20431-2
BU-20432-2
BU-20434-2
BU-20433-2
Price Each
1-24
25-49
8.03
7.58
11.86
11.19
34.46
32.51
13.39
12.63
Stock No.
93F9782
93F9784
93F9786
16F3558
Mfg. Part No.
BU-60CHS-0
BU-60CHS-2
BU-60HS-0
BU-60HS-2
● BU-60HPR-0
● BU-60HPR-2
● BU-60PR-2
● BU-70CS
● BU-70S
BU-63-0
BU-63-2
BU-63C-0
BU-63C-2
● BU-60
● BU-60C
● BU-60CS
● BU-60S
● BU-60U
● BU-60X
● BU-60TBO
● BU-65-0
● BU-65-2
(9062)
GENERAL-PURPOSE BANANA PLUGS, BANANA
JACKS AND SAFETY SOCKETS
BU-00245
BU-00243, BU-00244
BU-00246
BU-00247
All general-purpose banana plugs and jacks are rated 15A. Size: 0.16″ (4). Also available in red and other styles; go
online or call Newark.
BANANA PLUGS AND JACKS
Mfg. Part No.
BU-00245-0
BU-00246-0
BU-00249-0
BU-00247-0
BU-00243-0
BU-00244-0
BU-00233-0
Description
Banana Plug with Set Screw, Black
Banana Plug with Tapered Handle, Black
Stackable Banana Plug, Black
Dual Banana Plug, Black
Solderless Banana Plug, Black
Solderless Banana Plug, Hex Design, Black
Insulated Banana Jack, Black
Price Each
1-24
2.56
1.76
3.54
4.07
3.07
3.07
1.76
Stock No.
93F9718
93F9720
37B8573
93F9710
93F9716
93F9714
93F9819
(84785)
Fig.
1
1
1
1
2
2
2
2
2
3
3
3
3
4
4
4
4
4
4
4
5
5
Clip Length (in.)
211⁄32
211⁄32
211⁄32
211⁄32
215⁄64
215⁄64
131⁄32
111⁄16
111⁄16
21⁄4
21⁄4
21⁄4
21⁄4
131⁄32
131⁄32
131⁄32
131⁄32
131⁄32
131⁄32
131⁄32
31⁄4
31⁄4
Stock No.
28F506
28F505
28F504
28F503
16F6684
16F6685
28F464
28F532
28F531
28F533
28F534
28F535
28F536
28F500
16F3572
28F502
28F501
46F3809
83F8060
82C0881
93F9833
93F9831
1-24
1.91
1.91
1.27
1.27
0.90
0.90
1.01
1.21
0.97
1.85
1.85
2.49
2.49
0.59
0.90
1.46
0.80
0.59
1.17
1.19
8.29
8.29
Price Each
25-49
50-99
1.72
1.55
1.72
1.55
1.14
1.03
1.14
1.03
0.82
0.79
0.82
0.79
0.91
0.83
1.09
0.98
0.88
0.79
1.67
1.51
1.67
1.51
2.24
2.03
2.24
2.03
0.53
0.44
0.82
0.80
1.32
1.19
0.72
0.65
0.53
0.48
1.09
0.96
1.07
0.97
7.48
6.75
7.48
6.75
(9065)
GENERAL-PURPOSE
“PEE-WEE” CLIPS
5-AMP MINIATURE
ALLIGATOR CLIPS
Mfg. part no. BU-45 plated steel finish; rated 5A . Mfg. part no. BU-45C burnished copper finish; rated 10A. Clip length:
117⁄32″.
Price Each
Fig. 2
Fig. 1
Fig. 4
Fig. 3
Plated steel except “C” suffix burnished copper. Mfg. part nos. BU-30 and BU-30C for #20 wire or smaller. Mfg. part
no. BU-30BL barrel tail; solder or crimp connection. Mfg. part no. BU-30TBO threaded barrel tail; connects to 6-32
threaded male test prod. Mfg. part nos. BU-34 and BU-34C for #20 wire or smaller; solder connection.
Mfg. Part No.
BU-45
BU-45C
Price Each
Mfg. Part No.
● BU-30
● BU-30C
● BU-30BL
● BU-30TBO
● BU-34
● BU-34C
Fig.
2
2
4
3
1
1
Clip Length
13⁄32″
13⁄32″
11⁄4″
11⁄2″
13⁄32″
13⁄32″
Stock No.
28F528
28F529
46F3810
87F3721
28F496
28F497
1-24
0.49
0.74
0.47
1.05
0.88
1.17
25-49
0.44
0.67
0.42
0.95
0.79
1.05
50-99
0.40
0.61
0.38
0.86
0.72
0.95
100499
0.36
0.55
0.35
0.78
0.65
0.87
Jaws Open (in.)
5⁄16
5⁄16
Stock No.
28F513
28F514
1-24
0.97
1.61
25-49
0.88
1.46
50-99
0.79
1.32
100499
0.72
1.20
CROCODILE SOLID COPPER CLIPS
Mfg. part no. BU-50C has beryllium copper piercing needle in top jaw; 6-32 brass screw, rated 20A. Mfg. part no.
BU-51C same as mfg. part no. BU-50C, but no needle; clip length: 29⁄32″, 6-32 steel screw. Mfg. part nos. BU-85 and
BU-85C are 10A clips; clip length 21⁄8″
●
●
BU-50C
BU-51C
BU-85
BU-85C
0.500
0.500
0.313
0.313
28F510
28F511
28F507
28F508
3.88
2.78
1.09
2.10
3.50
2.51
0.98
1.89
3.16
2.26
0.89
1.71
2.88
2.06
0.81
1.56
ALLIGATOR TEST CLIPS
Mfg. part no. BU-27 solid copper, crimp or screw connection; jaw opening 5⁄8″, rated 40A. Mfg. part no. BU-55 is an
economy steel clip with screw connections; jaw opening 7⁄16″, rated 10A.
(9064)
●
●
BU-27CG
BU-27CGW
BU-55
1⁄4″(6.3)
L-Copper
1⁄2″ (12.7) L-Copper
Economy Steel Clip
16F3583
16F3584
16F3582
2.41
2.41
0.78
2.17
2.17
0.71
1.96
1.96
0.70
1.79
1.79
0.65
(9066)
(148841)
1.800.463.9275 • Find our complete selection at www.newark.com
STIBOINFO((NEWARK_MAIN_C124_2241))
C-2241
M-2241
Y-2241
B-2241
USEXP1-2241
2241
9
ND3% BASE1
XXXX3842-2242-1-Page 2242 TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 28-07-09 Hour: 09:26 TS:TS date TS time
HAND HELD TEST EQUIPMENT
Find Datasheets Online
TEST LEADS & ACCESSORIES
KELVIN CLIPS (10-AMP)
PLIER-TYPE BATTERY CLIPS (CONT.)
Fig. 1
Fig. 2
Used for 4-wire resistance measurement systems. Jaws are electrically isolated when open, shorted when closed. Mfg.
part no. BU-75K silver/gold tip contacts, 18 AWG wire. Mfg. part no. BU-78K features a current path for the source and
a circuit path for the sense gold contacts, 20 AWG wire.
Mfg. Part No.
● BU-102W-0
● BU-102W-2
BU-X15400-0
BU-X15400-2
Current
(A)
500
500
400
400
Color
Black
Red
Black
Red
Price Each
1-99
18.01
18.01
10.10
10.39
Stock No.
20J3348
20J3349
51B571
51B572
(9068)
Price Each
Mfg. Part No. Fig. Clip Length Jaws Open Stock No.
5⁄16″
1
15⁄8″
90F1604
BU-75K
1⁄2″
2
2.28″
84F764
● BU-78K
1-24
20.90
88.66
25-49 50-99
18.85 17.02
79.98 72.21
100499
15.51
65.81
FLEXIBLE VINYL
INSULATORS FOR CLIPS
(9583)
BU-13-2
Protective flexible vinyl insulators. Mfg. part nos. with suffix 0 = black, suffix 2 = red. Other colors available; go online or
call .
HEAVY-DUTY TEST
AND BATTERY CLIPS
Price Each
Mfg. Part No.
BU-13-2
BU-13-0
BU-23-2
BU-23-0
BU-26-2
BU-26-0
BU-29-2
BU-29-0
BU-31-2
BU-31-0
BU-32-2
BU-32-0
BU-35-2
BU-35-0
BU-36-2
BU-36-0
BU-47-2
BU-47-0
BU-49-2
BU-49-0
BU-62-2
BU-62-0
BU-87-2
BU-87-0
Fig. 3
Fig. 4
Fig. 1
Fig. 2
A range of versatile heavy-duty clips designed for battery operated equipment and automotive use etc. Mfg. part nos.
with suffix “A” are steel; suffix “C” are burnished copper; suffix “PN” are unmarked; suffix “PS” marked positive.
HEAVY-DUTY CLIPS
Price Each
Mfg. Part No.
BU-11APN
BU-11APS
BU-11CPN
BU-11CPS
● BU-33C
BU-21APN
BU-21APS
BU-21CPN
BU-21CPS
BU-24APN
BU-24APS
● BU-25
● BU-25C
Fig. Amps
1
100
1
100
1
200
1
200
1
300
2
50
2
50
2
100
2
100
3
25
3
25
4
40
4
75
Clip
Length
6″
6″
6″
6″
73⁄4″
47⁄64″
47⁄64″
47⁄64″
47⁄64″
227⁄32″
227⁄32″
3″
3″
Jaws
Open
15⁄8″
15⁄8″
15⁄8″
15⁄8″
113⁄16″
11⁄16″
11⁄16″
11⁄16″
11⁄16″
3⁄4″
3⁄4″
3⁄4″
3⁄4″
Stock No.
16F6674
16F6675
16F6676
16F6677
28F522
16F6678
16F6679
16F6680
16F6681
16F6682
16F6683
90F2011
28F519
1-24
7.44
7.62
15.20
15.20
45.40
2.85
2.85
7.86
7.86
1.46
1.46
1.96
4.87
25-49
6.80
6.98
13.89
13.89
40.95
2.60
2.60
7.19
7.19
1.34
1.34
1.77
4.40
50-99
6.63
6.69
13.30
13.30
36.98
2.53
2.53
7.00
7.00
1.30
1.30
1.60
3.97
100499
6.16
6.34
12.59
12.59
33.70
2.36
2.36
6.51
6.51
1.21
1.24
1.46
3.62
GENERAL-PURPOSE CLIPS
Mfg. part nos. BU-27, BU-48B are steel; mfg. part nos. BU-27C, BU-48C are burnished copper.
●
●
BU-27
BU-27C
BU-48B
BU-48C
4
4
4
4
20
40
10
20
27⁄16″
27⁄16″
2″
2″
5⁄8″
5⁄8″
1⁄2″
1⁄2″
28F523
28F524
28F515
28F538
1.40
2.31
1.28
1.81
1.26
2.09
1.16
1.63
1.14
1.88
1.05
1.47
1.04
1.72
0.96
1.34
For Clips
BU-11-A, BU-11-C
BU-11-A, BU-11-C
BU-21-A, BU-21-C
BU-21-A, BU-21-C
BU-24-A, BU-25, BU-25-C
BU-24-A, BU-25, BU-25-C
BU-27, BU-27-C
BU-27, BU-27-C
BU-30-BL, BU-30-TBO
BU-30-BL, BU-30-TBO
BU-30, BU-30-C
BU-30, BU-30-C
BU-33-C
BU-33-C
BU-34, BU-34-C
BU-34, BU-34-C
BU-45, BU-45-C
BU-45, BU-45-C
BU-48-B, BU-48-C
BU-48-B, BU-48-C
All BU-60 Series
All BU-60 Series
BU-85, BU-85-C
BU-85, BU-85-C
(9070)
(9067)
PLIER-TYPE BATTERY CLIPS
9
BU-102B-0
BU-102B-2
BU-40A-0
BU-40A-2
BU-41 series clips lock on both side and top terminal batteries, 9⁄16″ ID lug for #2 AWG wire. Jaws open: 19⁄16″. Clip
length: 6″. BU-40 and BU-46 series clips are ideal for trickle chargers and timing lights. Jaws open: 11⁄8″. Clip length:
37⁄8″. BU-102B series clips are similar to BU-41 series clips except they are fully insulated. BU-102BK series are
fully-insulated Kelvin clips. BU-102W series are fully-insulated clips ideal for welding applications. BU-X15400 series
epoxy coated steel clips with copper-plated jaws that open 11⁄2″. Clip length: 63⁄4″. All clips have vinyl insulating sleeves
except those that are fully-insulated or epoxy-coated. NOTE: “A” in mfg. part no. indicates copper-plated steel; “C”
indicates burnished solid copper. Suffix 0 in type number indicates black; suffix 2 indicates red . Other colors are
available; go online or call Newark.
Mfg. Part No.
BU-40A-0
BU-40A-2
BU-40C-0
BU-40C-2
BU-46A-2
BU-46A-0
BU-46C-2
BU-46C-0
BU-41A-2
BU-41A-0
BU-41C-2
BU-41C-0
● BU-102B-0
● BU-102B-2
● BU-102BK-0
● BU-102BK-2
Current
(A)
15
15
20
20
50
50
75
75
200
200
400
400
300
300
300
300
Color
Black
Red
Black
Red
Red
Black
Red
Black
Red
Black
Red
Black
Black
Red
Black
Red
Stock No.
20J3360
20J3361
20J3362
20J3363
28F468
28F467
46F3812
46F3811
28F465
28F466
90F1267
87F3651
20J3344
20J3345
20J3346
20J3347
Price Each
1-99
0.78
0.78
1.27
1.27
1.85
1.85
3.28
3.28
6.64
6.64
19.50
19.50
20.87
20.87
26.68
26.68
(148844)
2242
STIBOINFO((NEWARK_MAIN_C124_2242))
C-2242
M-2242
Y-2242
B-2242
USEXP1-2242
Stock No.
28F488
28F489
28F484
28F485
28F482
28F483
28F486
28F487
87F3718
87F3719
28F472
28F473
28F480
28F481
28F499
28F498
28F476
28F477
28F478
28F479
28F492
28F493
28F490
28F491
1-24
5.05
5.05
2.37
2.37
1.75
1.75
1.17
1.17
0.41
0.41
0.37
0.37
12.78
12.78
0.37
0.37
0.45
0.45
1.05
1.05
0.41
0.41
0.68
0.68
25-49
4.55
4.55
2.14
2.14
1.58
1.58
1.05
1.05
0.37
0.37
0.34
0.34
11.48
11.48
0.34
0.34
0.41
0.41
0.95
0.95
0.37
0.37
0.62
0.62
50-99
4.11
4.11
1.93
1.93
1.43
1.43
0.95
0.95
0.34
0.34
0.31
0.31
10.38
10.38
0.31
0.31
0.37
0.37
0.86
0.86
0.34
0.34
0.56
0.56
100499
3.75
3.75
1.76
1.76
1.30
1.30
0.87
0.87
0.31
0.31
0.28
0.28
9.48
9.48
0.28
0.28
0.34
0.34
0.78
0.78
0.31
0.31
0.51
0.51
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement