Graco 311005B Contractor II Gun Handle Kit Owner's Manual

Add to my manuals
2 Pages

advertisement

Graco 311005B Contractor II Gun Handle Kit Owner's Manual | Manualzz

Instructions

Contractor II Gun Handle Kit

Part No. 287594

311005B

2

1

1

2

Ref.

No.

Part No.

Description

15B580

100002

HANDLE

SET SCREW

Qty.

1

1

GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441

Copyright 2004, Graco Inc. is registered to I.S. EN ISO 9001

Instructions

Removing Handle

Note: Gun should not be attached to hose or sprayer.

Installing Handle

1.

Attach new handle (1) provided in kit to gun head.

1.

Disconnect trigger guard from gun body beneath diffuser by pushing up on guard hook and pulling it out of notch.

Fig. 1

2.

The trigger guard, beneath the gun body, can then be used as a wrench to loosen the nut.

ti5938a

Fig. 4

2.

Tighten handle (1) by hand until it is firmly seated in fluid head or use trigger guard to tighten nut

TIGHTEN

LOOSEN

Fig. 2

3.

Once nut is loosened, use your hand to twist handle and remove it from gun head.

ti5936a

Fig. 5

3.

Loosen set screw; turn handle (1) until set screw is aligned with notch in gun head. Use an Allen wrench to tighten set screw (2).

Fig. 3 ti5935a

Fig. 6

4.

Reattach trigger guard to gun.

TIGHTEN ti5932a www.graco.com

PRINTED IN USA 311005 Rev. 3/2005

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement