Graco Lube Equipment Couplers, Adapters, Nozzles, and Z-Swivels 306708K Owner's Manual

Add to my manuals
8 Pages

advertisement

Graco Lube Equipment Couplers, Adapters, Nozzles, and Z-Swivels 306708K Owner's Manual | Manualzz

Parts List

Lube Equipment

Couplers, Adapters,

Nozzles and Z-Swivels

306708K

EN

For valves and meters used to dispense grease, oil and other fluids. For professional use only.

Important Safety Instructions

Read all warnings and instructions in this manual and the equipment instruction manual. Save all instructions.

NOTICE

Thread sealant must be used for sealing pipe threads to prevent fluid leakage.

WARNING

SKIN INJECTION HAZARD

High-pressure fluid from dispensing device, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

• Do not point dispensing device at anyone or at any part of the body.

• Do not put your hand over the fluid outlet.

• Do not stop or deflect leaks with your hand, body, glove, or rag.

• Follow the Pressure Relief Procedure provided in the equipment instruction manual when you stop dispensing and before cleaning, checking, or servicing equipment.

• Tighten all fluid connections before operating the equipment.

• Check hoses and couplings daily. Replace worn or damaged parts immediately.

• Use only genuine Graco replacement parts that are identified in this manual. Other parts may rupture.

2

Couplers

Couplers

Taper Nose Hydraulic Coupler 200325

8000 psi (560 bar) Maximum Working Pressure

Giant Button-Head Hydraulic Coupler

200021

2000 psi (140 bar) Maximum Working Pressure

Standard Button-Head Hydraulic Coupler

200020

2500 psi (175 bar) Maximum Working Pressure

306708K

Adapters

Adapters

Hydraulic Adapter Accessory Kit 205592

See separate listing for each kit component for replacement parts and maximum working pressures.

Part No.

Description

201881

205532

205582

205568

205554

203504

ADAPTER, hydraulic-to-push, see page 3

ADAPTER, hydraulic-to-steel needle, see

page 3

ADAPTER, hydraulic-to-nylon needle, see

page 3

ADAPTER, nylon needle; see page 4

ADAPTER, plug, see page 4

HOSE, nozzle; with lock-sleeve connector,

see page 6

Low Pressure Adapters

Hydraulic-to-Push Adapter 201881

For U-joints and low pressure service

250 psi (18 bar) Maximum Working Pressure

Hydraulic-to-Steel Needle Adapter 205532

For flush fittings

250 psi (18 bar) Maximum Working Pressure

1

2

Ref

No.

Part No. Description

164799 NEEDLE, adapter

203497 CONNECTOR, locking sleeve,

18-27 npt(f)

Qty

1

1

2

1

Hydraulic-to-Nylon Needle Adapter 205582

For removable plugs

250 psi (18 bar) Maximum Working Pressure

1

2

Ref

No.

Part No. Description

3

164771*

164757

NOZZLE, fluid

TUBE, adapter; 2 in. (51 mm) long, 18-27 npt

203497 CONNECTOR, locking sleeve,

18-27 npt(f)

Qty

1

1

1

*Recommended spare part to keep on hand

3

2

1

306708K 3

4

Adapters

Nylon Needle Adapter 205568

For removable plugs

250 psi (18 bar) Maximum Working Pressure

1

2

Ref

No.

Part No. Description

164771*

164772

NOZZLE, fluid

TUBE, adapter; 1/8 npt; 5 in

(127 mm) long

*Recommended spare part to keep on hand

2

Qty

1

1

1

Medium Pressure Adapters

90-degree Plug Adapter 205554

For removable plugs

700 psi (49 bar) Maximum Working Pressure

1

2

3

Ref

No.

Part No. Description

205559 NUT, lock; 1/4-28

164762 ADAPTER, 90-degree

100846 FITTING, hydraulic, 1/4-28 thread

Qty

1

1

1

2

1

90-degree Adapter 223187

250 psi (18 bar) Maximum Working Pressure

2

3

4

Ref

No.

Part No. Description

1

Qty

203497 CONNECTOR, locking sleeve, 1

1/8-27 npt(f)

185914 ADAPTER, 1

151249 NIPPLE, 1/8-27 npt

156563 TIP, nozzle

1

1

1

3

High Pressure Adapters

Locking Sleeve Connector 203497

For quick connection to taper nose coupler

6000 psi (420 bar) Maximum Working Pressure

3

2

4

306708K

360-degree Grease Swivel and Coupler Kit

203597

6000 psi (420 bar) Maximum Working Pressure

1

2

Ref

No.

Part No. Description

200325 COUPLER, hydraulic

203198 SWIVEL, 360-degree, 1/8 npt

Qty

1

1

1

2

360-degree Grease Swivel

8000 psi (552 bar) Maximum Working Pressure

204082: 1/8 npt(m) x 1/8 npt(f)

204083: 1/4 npt(m) x 1/8 npt(f)

204084: 1/4 npt(m) x 1/4 npt(f)

Adapters

360-degree Grease Swivel 203198, 1/8 npt

8000 psi (552 bar) Maximum Working Pressure

306708K 5

6

Grease Nozzles

Grease Nozzles

Hose Nozzle 204204

5000 psi (350 bar) Maximum Working Pressure

WARNING

SKIN INJECTION HAZARD

To reduce the risk of skin injection:

• Only install a hose nozzle on the hand grip end of the flexible hose extension as shown below. The hand grip prevents exceeding the maximum bend radius of the hose. Never install a hose nozzle on the other end of the hose.

• Never use this flexible extension without the hand grip in place.

1

2

3

4

Ref

No.

Part No. Description

200325 HYDRAULIC, coupler

151277 TUBE, adapter; 2.5 in. (64 mm) long

100451 COUPLING, pipe; 1/8 npt

109145 HOSE, coupled; 1/8 npt(m); 1/4 in. (6.4 mm) ID; 12 in. (305 mm) long

Qty

1

1

1

1

4

Hand Grip

3

Hose Nozzle 203504

With lock sleeve connector

5000 psi (350 bar) Maximum Working Pressure

2

3

Ref

No.

Part No. Description

1 154289 HOSE, 3/16 in. ID, 12 in. (305 mm) long

203497 CONNECTOR, locking sleeve

200325 COUPLER, hydraulic

Qty

1

1

1

2

3

1

Standard Grease Nozzle 200389

8000 psi (560 bar) Maximum Working Pressure

Ref

No.

1

2

Part No. Description

TUBE, adapter; 1/8 npt(m); 6 in.

(152 mm) long

200325 COUPLER, hydraulic

Qty

1

1

2

1

Install Coupler (1) on this end ONLY .

2

1

306708K

Swivel Grease Nozzle

6000 psi (420 bar) Maximum Working Pressure

204072: 6 in. (152 mm) long

204897: 12 in. (305 mm) long

2

3

Ref

No.

1

1

Part No. Description

150622 TUBE, extension; 1/8 npt(m); 6 in. (152 mm) long (204072 only)

155836 TUBE, extension; 1/8 npt(m); 12 in. (305 mm) long (204897 only)

200325 COUPLER, hydraulic

203198 SWIVEL, 360-degree

Qty

1

1

1

1

3

2

Z-Swivels

Z-Swivel

6000 psi (420 bar) Maximum Working Pressure

129591: 1/4-18 npt

129592: 1/4-19 bspp

129593: 1/4-19 bspt

6500 psi (450 bar) Maximum Working Pressure

202577: 1/4-18 npt

224569: 3/8-18 npt

202579: 1/8-27 npt(m); 1/4-18 npt(f)

24H614: 1/4-19 bspt

24H615: 1/4-19 bspp

Z-Swivels

1

306708K 7

Graco Information

For the latest information about Graco products, visit www.graco.com

.

For patent information, see www.graco.com/patents .

TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor. Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

Original instructions.

This manual contains English. MM 306708

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

Copyright 2002, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

www.graco.com

Revision K , February 2017

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents