PWMA150

www.pyleaudio.com

We appreciate for your purchasing this amplifier system.

Please read the manual thoroughly and keep this manual in a safe place for future reference.

Note:

Users are not permitted to disassemble the device in any way . Any unaut horized repairs or access without written approval from our distributor or dealer will void the product warranty. If you have any question, please feel free to contact with our distributors or dealers respectively.

Basic Features of the Amplifier System:

This amplifier consists of SMD electronic components & SMT technology which breed the best quality in the industry. It's specially designated for

Teaching, promotion, lecture, Assembly. It has a high sensitivity, frequency steady, anti-whistle . Intelligent rechargeable power device can prevent the circuit get damage because of non-proper operating. It has a gorgeous portable design; that is your premium partner.

Caution:

1.PIease plug In & charge the bui~-in rechargeable battery continuously

8 hours without Interruption before yoo proceed to operate at the first time.

2.Please keep it far 8!Nay from the high power wireless transmit device in order to avoid the signal interference.

3. It comes with a magnet coil inside the speaker. Please keep it 60an 8!Nay from the computer or TV in order to avoid the magnetic interference.

4. Please do not dispose the amplifier near any flame. For example: a buming candie/Fire place . Overheat damages the ampllfler components.

5.Please do not dispose the amplifier near any water splashing . Any water splashed inside the amplifier damages the components .

6.when the amplifier operates, please keep at least 20 em space around for ventilation . Please de not block the ventilation vent with newspapers, table doth or curtain . It will easily cause overheat and damages the amplifier components .

7.PIease stop operating the amplifier and send It to our appointed service center or the authorized technicians for repairing under the following cases:

A.The power cable or the power source plug is damaged .

B.Alien articles or water splashed inside the amplifier.

C.The components are damaged or out of order.

Description of the Amplifier:

CD

Volume Control

® Tone Control

® Audio Output

®

Power ON/OFF

@ Wired MIC Input

Packing Included:

1 . Amplifier: 1 pes

2 . Strap : 1 pes

3 . Wireless Microphone: 1 pes

4. 9V Battery: 1 pcs

5. User Manual : 1 pes

® Wireless Received Indicator

IJ) Power/Recharge Indicator

® Fast Backward

®

Play/Stop

@J Fast Forward

@ USB Plug

Caution:

Please use the same specification battery, otherwise, the battery may explode if you insert with wrong specificalion battery.

Operating of Audio output:

Connect the external amplifier to the audio output jack.

Operating of Wired microphone:

Connect the wired microphone to the "Wired MIC Input" jack; adjust the volume to the position as you need.

Operating of Bass & Trebles volume control:

The Bass & Trebles volume control can be adjusted the tone in order to achieve the best effect for your listening. If il sounds whislle, please lurn down the Trebles.

Operating for large area coverage:

When you require to cover the acoustic effect for the larger area like hall or plaza, you can use a wireless microphone and conneclwith several amplifiers with the same FM frequency. This canreproduce the sound simultaneously and cover a larger area extensively.

Trouble shooting:

Occurrence Reasons and Resolutions

The LED in the amplifier The baiter power lows, please change to AC power, is not bright and charge Ihe battery on time.

Screaming

Noise or abrupt stop

I.Tum the volume of the amplifier and transmitter to

Bass position.

2.Turn Ihe tone 10 Bass posilion.

3.Adjust the cover range and directions; please do nol let the loudspeaker of the amplifier face towards to the microphone in a short distance.

1.The power of the amplifier and transmitter is low.

2.The microphone or the cable has been damaged.

3.1nterfered by the same frequency.

No Voice hear

1. The power in the amplifier or microphone is OFF.

2.The cable has been damaged.

3.The volume control in the amplifier or transmitter is

OFF.