NIBCO CPC604HD3412 3/4 in. x 1/2 in. Copper Press x MIP Pressure Male Adapter Guide
Advertisement
Advertisement
C-NPS-0619
A H E A D O F T H E F L O W
®
N I B C O
®
P r e s s S y s t e m
Business-to-Business Solutions
Look to NIBCO for technology leadership.
The velocity with which e-business evolves demands that new products and services be continuously developed and introduced to keep our customers at the center of our business efforts.
NIBCO provides an entire suite of business-to-business solutions that is changing the way we interact with customers.
NIBCOpartner.com
sm is an exclusive set of secure web applications that allow quick access to customer-specific information and online order processing. This self-service approach gives you
24/7 access to your order status putting you in total control of your business.
Real time information includes:
• Online order entry
• Inventory availability
• Viewable invoices & reports
•
•
•
Current price checks
Order status
Online library of price sheets, catalogs & submittals
Electronic Data Interchange (EDI) makes it possible to trade business documents at the speed of light. This technology cuts the cost of each transaction by eliminating the manual labor and paperwork involved in traditional order taking. This amounts to cost-savings, increased accuracy and better use of resources.
With EDI, you can trade:
• Purchase orders
• PO Acknowledgements
• Invoices
•
•
•
Product activity data
Advanced ship notices
Remittance advice
Vendor Managed Inventory (VMI) , a sophisticated service for automated inventory management, reduces your overhead by transferring inventory management, order entry and forecasting to
NIBCO. This is an on-going, interactive partnership with NIBCO.
Through automation, VMI brings results:
• Improves customer service
• Optimum inventory efficiencies
• Better forecasting
•
•
•
Cuts transaction costs
Peace of mind
Relief from day-to-day management
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH:1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 8/17/2020
NIBCO ® Press System
Table of Contents
Page
Contents .......................................................................................... 1
Fittings ....................................................................................... 3-10
Applications Chart ...................................................................4
Adapters ....................................................................................5
Caps ..........................................................................................5
Couplings ..................................................................................6
Elbows ....................................................................................6-8
Fitting Reducers ........................................................................8
Flanges ......................................................................................8
Tees ...........................................................................................9
Unions .....................................................................................10
Accessories .............................................................................10
Valves ...................................................................................... 11-65
Illustrated Index ................................................................ 12-13
PC-585HP-LF ............................................................................14
PC-585HP-66-LF ......................................................................15
TPC-585HP-LF
PC-585HP-LF-HC
PC-585-70 Ball Valve ..............................................................18
PC-585-70-66 Ball Valve .........................................................19
TPC-585-70 Ball Valve ............................................................20
TPC-585-70-66 Valve ..............................................................21
PC-585-70-HC Ball Valve-Hose Connection w/Cap & Chain .22
PC-585-70-66-HC Ball Valve-Hose Connection w/Cap & Chain ..23
PC-585-80-LF Lead-Free Ball Valve.........................................24
PC-585-66-LF Lead-Free Ball Valve.........................................25
PC-585-80-LF-HC Lead-Free Ball Valve...................................26
PC-585-66-LF-HC Lead-Free Ball Valve .................................27
TPC-585-80-LF Ball Valve .......................................................28
TPC-585-66-LF Ball Valve .......................................................29
PC-585-80-LF-SR Ball Valve w/Spring Return Handle ..........30
PC-585-80-LF-HC-SR Ball Valve w/Hose end and w/Spring Return Handle .........................................................31
PC-595-Y/R-LF Ball Valve .......................................................32
PC-595-Y/R-66-LF Ball Valve .................................................33
PC-FP-600A-LF Lead-Free Ball Valve ................................34-35
PC-FP-600A-LF-W Lead-Free Ball Valve ................................36
PCMT-FP-600A-LF Lead-Free Ball Valve ................................37
PCT-FP-600A-LF Lead-Free Ball Valve ...................................38
PC-FP-600A-D-LF Lead-Free Ball Valve .................................39
PC-FP-600A-LF-HC Lead-Free Ball Valve ...............................40
PCPXA-FP-600A-LF Lead-Free Ball Valve ..............................41
PCPX-FP-600A-LF Lead-Free Ball Valve .................................42
Visit our website for the most current information.
Page
PCFU-FP-600A-LF Lead-Free Ball Valve .................................43
PCMU-FP-600A-LF Lead-Free Ball Valve ...............................44
PCSU-FP-600A-LF Lead-Free Ball Valve ................................45
PCU-FP-600A-LF Lead-Free Ball Valve ...................................46
PC-FP-600A-S-LF Lead-Free Slip Valve ..................................47
PC-FP-485-LF Lead-Free Ball and Check Valve ......................48
PF-111 Gate Valve ..................................................................49
PC-111-LF Gate Valve .............................................................50
PF-113 Gate Valve ..................................................................51
PC-113-LF Gate Valve .............................................................52
PF-211-Y Globe Valve .............................................................53
PF-311-Y Angle Valve .............................................................54
PC-413-Y-LF Lead-Free Check Valve ......................................55
PC-480-Y/W-LF
PF-413-Y Check Valve .............................................................57
PF-480-Y In-line Lift Check Valve ...........................................58
PFD-2000 Butterfly Valve ........................................................59
PS-585-70 Ball Valve ..............................................................60
PS-585-70-66 Ball Valve .........................................................61
PS-585-70-HC Ball Valve-Hose Connection w/Cap & Chain ....62
PF-221/222-A/B Bronze Y-Strainer .........................................63
Handle Options and Accessories ...........................................64
NIB-SEAL
NIB-SEAL
® Technical Data .....................................................65
® Locking Extended Handle Technical Data ...........66
Butterfly Valve Options and Accessories ...............................67
Butterfly Valve Technical Information ....................................68
Tools and Jaws .......................................................................69-73
Standard Pressing Tool - PC-280 ............................................70
Mini Pressing Tool - PC-20M ..................................................71
PC-10M and PC-100 Accessories ...........................................72
Approved Tool and Jaw Compatibility Matrix .......................73
Engineering Data ................................................................... 74-77
Copper and Copper Alloy Fittings ...........................................75
Sample Specification - Fittings ..............................................76
Sample Specification - Valves ................................................77
Installation Instructions ....................................................... 78-85
1/2" - 2" Fittings and Valves ..............................................80-81
2 1 /
2
" - 4" Fitting and Valves ...............................................82-83
Testing Instructions for Leak Detection ..................................84
Miscellaneous Technical Information.....................................85
Frequently Asked Questions .....................................................86
Press System Warranty ..............................................................87
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
1
A H E A D O F T H E F L O W ® www.nibco.com
Revised 11/9/2017
Quick and Easy
The NIBCO Press System is user friendly, quick and easy to install. Installation can be completed in less time than traditional solder, threaded, brazed or grooved copper systems. Significant time savings means tight budgets and deadlines are met while project delays and cost overruns are avoided.
Full System Product Offering
The NIBCO Press System is more than just 1/2" to 4" fittings. Our offering also includes the industry's widest and most specified range of ball, gate, globe, angle, check and butterfly valves in addition to a full line of NIBCO tools necessary to complete a total system installation.
Flameless
The NIBCO Press System is easier and safer to use because there is no flame, solder or flux required. Connections can even be made on a wet tube!
Reliable
With the NIBCO Press System, a watertight joint is formed between the EPDM seal and the crimped fitting or valve providing a permanent connection. Reliability you can count on ... NIBCO press fittings are backed by a 110-year-old company and a 50-year written guarantee.
Approvals, Standards and Performance
The NIBCO Press System has undergone extensive and rigorous internal and external testing and meets various worldwide, industry and governmental standards and codes. Compliant with the following except where otherwise noted: ASME 16.51
Performance • International Residential Code ® (IRC) • International Plumbing Code ® (IPC) • International Mechanical
Code ® (IMC) • Uniform Plumbing Code* (UPC) • Uniform Mechanical Code* (UMC) • State of Massachusetts (Plumbing).
*Uniform Plumbing Code and Uniform Mechanical Code are copyrighted publications of the International Association of
Plumbing and Mechanical Officials.
Third-party certified to: IAPMO PS 117, Copper, Copper Alloy, Carbon Steel, and Stainless Steel Piping System with Press-
Type and Nail-Type Connections ICC-ES LC1002, Press-Connection Fittings for Potable Water Tube and Radiant Heating
Systems ½” thru 2” ASME B16.51, Copper and Copper Alloy Press-Connect Pressure Fittings NSF/ANSI 61, Drinking Water
Systems Components—Health Effects NSF/ANSI 372, Drinking Water Systems Components—Lead Content.
All valves and fittings are manufactured under a Quality Management System conforming to the current version of
ISO 9001 standards.
Applications
The NIBCO Press System can be used in new construction or repair work and is designed for potable water, HVAC and process water systems for commercial, industrial and residential applications.
Professional Appearance
The NIBCO Press System creates a clean joint without the mess of excess solder or discoloration.
Joint Integrity
The NIBCO Press System uses engineered tools, jaws and chains that are tested and approved to ensure a consistent, reliable crimp.
Visit our website for the most current information.
2
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Fittings
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
3
www.nibco.com
A H E A D O F T H E F L O W ®
Press Fitting Applications Chart
Types of Service
Fluids/Water
Hot and Cold Potable Water
Rainwater/Gray Water
Chilled Water
Hydronic Heating
Cooling Water
Ethanol
Comments Pressure
Up to 50% Ethylene Glycol/Propylene
Glycol solution appropriate for the application temperature range
200 psi
Subject to local codes/authority having jurisdiction with appropriate precautions to prevent systems from freezing
Propylene Glycol
200 psi
200 psi
200 psi
200 psi
200 psi
Temperature
32°F to 250°F
-20°F to 250°F
-20°F to 250°F
-20°F to 250°F
-20°F to 250°F
-20°F to 250°F
Compatible with
EPDM Seal
•
•
•
•
•
•
Gasses
Compressed Air Less than 25mg/m3 Oil Content 200 psi
Oxygen - O2 (non-medical) Keep Oil and Fat Free/Non-Liquid O2 140 psi
Nitrogen - N2 200 psi
Argon Welding Use 200 psi
Hydrogen - H2 125 psi
Vacuum
Max 29.2 in. of Mercury-Hg
Carbon Dioxide - CO2
Low Pressure Steam
Dry 200 psi
15 psi
Up to 140°F
Up to 140°F
Up to 140°F
Ambient
Up to 250°F
Up to 140°F
Up to 140°F
Up to 250°F
•
•
•
•
•
•
•
•
Visit our website for the most current information.
4
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
ADAPTERS
www.nibco.com
Revised 1/27/2022
ADAPTERS
( Cont.)
PC603
Adapter P x F – Wrot
NOM. SIZE
APPROX.
NET WT./LBS.
DIM. A
INCHES
1/2
1/2 x 3/8
1/2 x 3/4
3/4
3/4 x 1/2
1
1 x 1/2
1 x 3/4
.103
.081
.151
.158
.153
.237
.172
.217
1 x 11/4
11/4
11/4 x 1
11/4 x 11/2
.436 1 3 /
16
.372 1 1 /
16
.359
.425
1
1
1
7
/
/
16
32
11/2
11/4 x 2
.518 1 1 /
16
.276 1
11/2 x 11/4 .515 1
2 .672 1
21/2
3
4
1.222 1 13 /
32
1.756 1 23 /
32
3.238 1 7 /
8
25 /
32
15 /
16
3 /
4
13 /
16
13 /
16
21 /
32
31 /
32
27 /
32
PC604
Adapter P x M – Wrot
NOM. SIZE
APPROX.
NET WT./LBS.
DIM. B
INCHES
1/2
1/2 x 3/8
1/2 x 3/4
3/4
.103
.105
.191
.180
7
27
/
8
/
32
1 1 /
4
1 1 /
16
3/4 x 1/2
3/4 x 1
1
1 x 3/4
.189
.268
.255
.253
31 /
32
1 3 /
16
1 3 /
32
1 1 /
32
.457 1 17 /
32
1 x 11/4
11/4
11/4 x 1
.467 1 13 /
32
.335 1 3 /
16
11/4 x 11/2 .537 1 1 /
2
11/2 .696 1 1 /
2
11/2 x 11/4 .603 1 3 /
8
11/2 x 2
2
.784
.856
1
1
7
7
/
/
16
16
2 x 11/2
2 1/2
3
4
1.087 1 19 /
32
1.322 1 27 /
32
2.104
3.298 2
2
9
1
/
/
8
32
PC604-P
Adapter PEX x P – Wrot
NOM. SIZE
1/2 x 1/2
1/2 x 3/4
3/4 x 1/2
3/4 x 3/4
1 x 1
APPROX.
NET WT./LBS.
.055
.108
.057
.108
.148
DIM. B
INCHES
1 /
8
7 /
32
3 /
32
5 /
32
5 /
32
CAPS
PC617
Cap P – Wrot
NOM. SIZE
APPROX.
NET WT./LBS.
DIM. N
INCHES
1/2
3/4
.046
.087
5 /
32
5 /
32
1 .125 1 /
8
/
32
PC603-2
Extended Adapter FTG x F – Wrot
NOM. SIZE
1/2 x 3/8
1/2
1/2 x 3/4
3/4 x 1/2
3/4
1 x 1/2
1
11/4 x 1/2
11/4
11/2
2
APPROX.
NET WT./LBS.
DIM. B
INCHES
0.064
0.096
0.132
0.107
1 17 /
32
1 3 /
4
1 27 /
32
1 25 /
32
0.145
0.146
1
8
0.220 1
2
2
16
0.193 2 3 /
16
0.322 2
0.431 2
0.683 2
/
32
/
16
PC604-2
Extended Adapter FTG x M – Wrot
NOM. SIZE
APPROX.
NET WT./LBS.
DIM. B
INCHES
1/2 x 3/8
1/2
1/2 x 3/4
3/4 x 1/2
3/4
1 x 3/4
1
11/4
11/2
2
0.056
0.101
0.145
0.100
1 3 /
4
1 29 /
32
2 1 /
16
1 15 /
16
0.136 2 1 /
16
0.175 2 1 /
16
0.243 2 5 /
16
0.408 2 17 /
32
0.530 2 7 /
8
0.782 3 11 /
32
2
3
4
.493
.713
1.491
3 /
32
7 /
32
1 /
4
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
5
A H E A D O F T H E F L O W ®
COUPLINGS COUPLINGS
( Cont.) www.nibco.com
Revised 1/27/2022
COUPLINGS
( Cont.)
PC600-DS
Coupling P x P – Wrot
NOM. SIZE
APPROX.
NET WT./LBS.
1/2
3/4
1
11/4
.083
.157
.198
.271
11/2
2
21/2 .669
3
4
.530
.691
.979
2.134
DIM. A
INCHES
3 /
16
5 /
32
5 /
32
5 /
32
3 /
16
5 /
32
1 /
8
1 /
8
7 /
32
PC600-RS
Coupling P x P – Wrot
NOM. SIZE
APPROX.
NET WT./LBS.
DIM. A
INCHES
21/2 .688
3
4
.979
2.134
1 /
8
1 /
8
7 /
32
PC600-R
Reducing Coupling P x P – Wrot
NOM. SIZE
APPROX.
NET WT./LBS.
DIM. A
INCHES
3/4 x 1/2
1 x 1/2
1 x 3/4
11/4 x 3/4
11/4 x 1
11/2 x 3/4
11/2 x 1
.121
.139
.184
.245
.231
.382
.370
7
15
13
/
16
/
32
/
32
11/2 x 11/4 .399
1 /
4
7 /
16
13 /
32
1 /
2
2 x 3/4
2 x 1
.516
.552
9 /
32
29 /
32
11 /
16
/
16
2 x 11/2 .662
21/2 x 1 .620
7 /
16
31 /
32
21/2 x 11/4 .644
21/2 x 11/2 .678
21/2 x 2
3 x 11/2 .956 1 1 /
16
3 x 2
.699
1.032
23 /
32
11 /
32
23 /
32
3 x 21/2 .951
4 x 2 1.949 1 5 /
32
4 x 21/2 1.807 1
4 x 3 1.960 27 /
32
PC601L
Extended Repair Coupling P x P
NOM. SIZE
1/2
3/4
1
11/4
11/2
2
APPROX.
NET WT./LBS.
DIM. B
INCHES
0.1250
0.2200
2 29
3
0.3050 3
/
32
32
1 /
/
32
0.4090 4
1.0230 5
4
PC636
Crossover Coupling P x P – Wrot
NOM. SIZE
1/2
APPROX.
NET WT./LBS.
.222
DIM. A
INCHES
2 5 /
32
ELBOWS
PC601 (No Stop)
Repair Coupling P x P – Wrot
NOM. SIZE
APPROX.
NET WT./LBS.
DIM. B
INCHES
1/2
3/4
.082
.157
1 .190
11/4 .271
1 3 /
4
2 1 /
4
2 1 /
4
2 15 /
32
11/2 .511
2
3 11 /
32
.691 3 5 /
8
21/2 .669
3
4
.979
1.878
2 15 /
16
3 5 /
16
4 5 /
16
PC606
45° Elbow P x P – Wrot
NOM. SIZE
APPROX. DIM. A DIM. B
NET WT./LBS. INCHES INCHES
1/2 .092
3/4 .181
1 1 /
8
1 /
2
1 13 /
32
1 .251
11/4 .403 1
1 /
2
11/2
2
.666
25 /
32
15 /
16
2 5 /
16
1.063 1 3 /
16
2 23 /
32
21/2 1.041 2 3 /
8
3
4
1.536 1 1 /
8
2 25 /
32
3.375 1 11 /
16
3 27 /
32
Visit our website for the most current information.
6
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
ELBOWS
( Cont.) www.nibco.com
Revised 2/23/2022
PC606-2
45° Elbow Ftg x P – Wrot
APPROX.
NET WT.
DIMENSIONS
INCHES
NOM. SIZE LBS. A B C
1/2
3/4
.094 7 /
16
1
16
1 /
8
.171 17 /
32
1 13 /
32
1 13 /
32
1 .248 9 /
16
1 17 /
32
1 7 /
16
11/4 .368
11/2
2
.673 1
11 /
16
1 3 /
4
1 11 /
16
21/2 1.050 3 /
16
2 3 /
8
3
4
13 /
16
2
1.057 1 2
5
21
/
/
16
32
2
2
3
1
/
/
16
2
1.526 1 5 /
32
2 19 /
32
2 13 /
16
3.284 1 17 /
32
3 3 /
32
3 11 /
16
PC607-2
90° Elbow Ftg x P – Wrot
APPROX.
NET WT.
DIMENSIONS
INCHES
NOM. SIZE LBS. A B C
1/2
3/4
1
11/4
11/2
2
21/2
3
4
.110
.219 1
.319 1
.871 2
1.474 2
1.356 1
3.920 2
25
.490 1
1
13
7
7
29
19
2.065 2 3
15
/
/
/
/
/
/
/
/
32
16
32
8
32
32
32
32
1
2
2
3
3
4
3
4
21
7
17
3
15
17
7
13
3
/
/
/
/
/
/
/
/
/
32
32
32
32
16
32
32
16
4
1
1
2
3
4
3
2
3
4
15
31
5
29
11
15
1
21
5
/
/
/
/
/
/
/
/
/
32
32
16
32
16
32
16
32
8
PC607-3
90° Elbow P x F - Wrot
APPROX.
NET WT.
DIMENSIONS
INCHES
NOM. SIZE LBS. A B C
1/2
1/2 x 3/8
1/2 x 3/4
3/4
3/4 x 1/2
1
11/4
11/2
2
.191
.154
.251
.892 1
2.109 2
25
25
25
.361 1
.321 1
.513 1
1.314 2
1
1
1
27
7
29
/
/
/
/
/
/
/
/
/
32
32
32
16
16
16
32
32
32
2
2
2
3
2
3
4
5
5
17
7
11
3
1
1
27
15
5
/
/
/
/
/
/
/
/
/
32
32
16
8
32
32
16
16
8
1
1
1
2
3
4
2
15
15
15
5
29
11
15
2
2
/
/
/
/
/
/
/
32
32
32
16
32
16
32
PC607
90° Elbow P x P – Wrot
NOM. SIZE
APPROX. DIM. A DIM. B
NET WT./LBS. INCHES INCHES
1/2 .110 1 15
3/4 .223 1 3 /
32
2
/
32
3/4 x 1/2
1
.201
1 5 /
32
2
.331 1 15 /
32
2 11 /
32
1 x 3/4 .321 1 5 /
16
2 5 /
16
11/4 .528 1 27 /
32
2 29 /
32
11/2
2
21/2 1.224 1 5 /
8
3 3 /
32
3
4
.895 2 7 /
32
3 21 /
32
1.480 2 15 /
16
4 15 /
32
1.900
3.935 2 15
2 3
/
32
4
21
5
/
/
32
8
PC607-LT
90° Long Radius Elbow
P x P – Wrot
NOM. SIZE
21/2
3
4
APPROX. DIM. A DIM. B
NET WT/LBS. INCHES INCHES
2.066 3 11 /
16
5 5 /
32
2.810 4 1 /
32
5 11 /
16
5.696 5 1 /
4
7 13 /
32
PC607-4
90° Elbow P x M - Wrot
APPROX.
NET WT.
DIMENSIONS
INCHES
NOM. SIZE LBS. A B C
1/2
1/2 x 3/4
3/4
3/4 x 1/2
1
11/4
11/2
2
.183
.340
.349 1
.340 1
.521 1
.926 1
2.205 2
25
25
1.443 2
1
1
7
27
7
29
/
/
/
/
/
/
/
/
32
32
16
16
16
32
32
32
2
2
3
3
3
4
4
5
9
21
1
1
13
1
15
5
/
/
/
/
/
/
/
/
32
32
32
16
32
32
16
8
1
1
2
3
4
2
15
15
5
29
11
15
2
2
/
/
/
/
/
/
32
32
16
32
16
32
PC607-2-LT
90° Long Radius Elbow
Ftg x P - Wrot
APPROX.
NET WT.
DIMENSIONS
INCHES
NOM. SIZE LBS. A B C
21/2
3
2.114 3 11
3.037 4 1 /
/
16
32
5 7 /
5 3 /
32
4
5
5
5
11
/
/
32
16
PC607E-2
Extended Elbow P x FTG – Wrot
APPROX.
NET WT.
DIMENSIONS
INCHES
NOM. SIZE LBS. A B C
3/4 .407 29 /
32
6 1 /
8
1 25 /
32
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
7
A H E A D O F T H E F L O W ®
ELBOWS
( Cont.)
FITTING REDUCERS
www.nibco.com
Revised 1/27/2022
FLANGES
PC705-D
Vent Elbow P x P – Forged Brass
NOM. SIZE
1/2 .010
19 /
32
19 /
32
9 /
16
3/4 .010
3 /
4
3 /
4
11 /
16
PC605
Stiffener – Wrot
NOM. SIZE
3/4
PC707-3-5-LF
APPROX.
NET WT. LBS.
.043
90° Drop Elbow P x F – Cast
*Lead Free
APPROX. DIMENSIONS
NET WT. INCHES
LBS. C D E
NOM. SIZE
APPROX. DIMENSIONS
NET WT. INCHES
LBS. A C E
1/2 .252
17 /
32
7 /
8
27 /
32
3/4 .588
23 /
32
1 5 /
8
31 /
32
PC600-2
Fitting Reducer Ftg x P – Wrot
NOM. SIZE
APPROX.
NET WT/LBS.
DIM. A
INCHES
1/2
3/4 x 1/2
3/4
1 x 1/2
1 x 3/4
1
11/4 x 1/2
11/4 x 3/4
11/4 x 1
11/4
11/2 x 1/2
11/2 x 3/4
.243
.248
11/2 x 1 .251
11/2 x 11/4 .251
.610 21 /
32
.092
.126 31 /
.123
.151
.162
.155
1
1 7 /
16
1
1
7
13
1
/
/
/
32
16
32
8
.175
.181
1 19 /
32
1 13 /
32
1 7 /
16
.215 1 3 /
16
11/2
2 x 1/2
2 x 3/4
2 x 1
2 x 11/4
2
2
21/2 x 3/4
21/2 x 1
.382 1 5 /
16
.394
.405
.398
1
2 3 /
32
31 /
32
1 13 /
16
1 25 /
32
2
2
.420 2
2 1 /
2
11
3
7 /
/
1 31 /
/
32
32
32
.507
32
.619 1 9 /
16
.540
.707
2 1 /
2
2 1 /
2
21/2 x 11/4 .776 2 9 /
16
21/2 x 11/2 .840 2 13 /
32
21/2 x 2
3 x 3/4
3 x 11/4
3 x 11/2
3 x 2
3 x 21/2
4 x 3/4
4 x 2
.839
.755 2 29
2
/
32
.882 2 13 /
16
1.055 2 13 /
16
1.084 2 3 /
8
.820 2 1 /
4
1.723
1.832
4 3 /
32
3 5 /
8
4 x 21/2 1.837 3 1 /
32
4 x 3 2.013 3 1 /
32
A
PC741
Companion Flange
P x Flange - Cast Bronze Flange/
Wrot Outlet
NOM. SIZE
1 1.428 1 1 /
4
4 1 /
4
1 /
4
3 1 /
8
11/4 1.632 1 5 /
16
4 5 /
8
1 /
4
3 1 /
2
11/2 2.186 1 7 /
16
5 5 /
16
3 7 /
8
2 3.352 1 11 /
16
6 3 /
8
4 3 /
4
NOTE: Maximum pressure 105 psi CWP, 90 psi at 250°F.
Use in U.S. drinking water applications is prohibited after
January 3, 2014.
PC641
APPROX. DIMENSIONS
NET WT.
LBS.
INCHES
B F G W
Companion Flange
P x Flange - Wrot
APPROX.
NET WT.
DIMENSIONS
INCHES
NOM. SIZE LBS. A B C
3/4
1
11/4
11/2
1.518 1 21 /
32
2 17 /
32
7 /
16
2.013 1 23 /
32
2 19 /
32
1 /
2
2.623 1 21 /
32
2 21 /
32
9 /
16
3.342 1 1 /
2
2 7 /
8
5 /
8
2 4.884 1 15 /
32
2 11 /
32
5 /
8
21/2 6.418 25 /
32
5 /
8
3
4
7.409 15 /
32
2 15 /
16
21 /
32
10.920 21 /
32
3 3 /
8
23 /
32
DIMENSIONS INCHES
NOM. SIZE D E F G
3/4
1
11/4
11/2
2
21/2
3
4
9 /
16
2 3 /
4
3 7 /
8
5 /
8
11 /
16
3 1 /
2
4 5 /
8
5 /
8
25 /
32
3 7 /
8
25
3
5 /
8
3 1 /
8
4 1 /
4
5 /
8
/
32
4 3 /
4
/
4
5 1 /
2
5 5 /
8
6 3 /
4
13
7 3 /
4
/
16
6 7 1 /
2
3 /
4
1 7 1 /
2
9 3 /
4
PC707-3-5-A
Hi-Ear Elbow P x F – Cast *Lead
Free
NOM. SIZE
1/2
APPROX. DIM. C DIM. E
NET WT/LBS. INCHES INCHES
.192 7 /
8
27 /
32
PC607-2EW Stub-Out F x S
NOM. SIZE
1/2
3/4
1
APPROX.
NET WT/LBS.
DIM. A
INCHES
.360 3 5 /
8
.520 3 15 /
16
.740 6 1 /
16
NOTE: 4" requires (8) "G" holes equally spaced.
NOTE: Mates with ANSI Class 125/150 flanges.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25%
Visit our website for the most current information.
8
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
FLANGES
PC672-2
Companion Flange
FTG x Flange – Wrot
NOM. SIZE
APPROX. DIMENSIONS
NET WT.
LBS.
INCHES
A C D
2 5.46 6 5 /
8
25 /
32
21/2 7.44 6
8
25 /
32
3
4
8.63 6 5 /
8
25 /
32
12.03 6 23 /
32
7 /
8
NOM. SIZE
2
21/2
3
4
DIMENSIONS
INCHES
E F G
4 3 /
4
6 3 /
4
5 1 /
2
7 3 /
4
6 7 1 /
2
3 /
4
7 1 /
2
9 3 /
4
TEES
( Cont.)
PC611
Tee P x P x P – Wrot
NOM. SIZE
APPROX. DIMENSIONS
NET WT. INCHES
LBS. C F G
1/2 .176
23 /
32
23 /
32
15 /
32
1/2 x 1/2 x 3/4
1/2 x 1/2 x 1
.314
2 1 /
16
2 1 /
16
15 /
16
.491 1 7 /
32
1 7 /
32
7 /
8
3/4 .320
3/4 x 1/2 x 1/2
3/4 x 1/2 x 3/4
3/4 x 3/4 x 1/2
3/4 x 3/4 x 1
1
1 x 1/2 x 3/4
1 x 1/2 x 1
1 x 3/4 x 1/2
1 x 3/4 x 3/4
.281
.320
.276
.461 1
.501
.400
.513
.440
.459
5
21
21
7
23
13
13
25
1
/
/
/
/
/
/
/
/
/
8
32
32
8
32
32
16
16
32
29
1
21
1
1
1
1
7
31
1
1
1
5
1
/
/
/
/
/
/
/
/
/
32
8
16
32
32
4 27
32
16
32
21
11
21
29
29
27
1
13
5
/
/
/
/
/
/
/
/
/
32
16
32
32
32
32
32
32
16
TEES
( Cont.)
NOM. SIZE
APPROX.
NET WT.
LBS. C
DIMENSIONS
INCHES
F G
1 x 3/4 x 1
1 x 1 x 1/2
1 x 1 x 3/4
1 x 1 x 11/4
.578 13 /
16
1 1 /
16
7 /
8
.324 21 /
32 21
/
32
7 /
8
.388 3 /
4
3 /
4
27 /
32
.723 1 1 /
8
1 1 /
8
7 /
8
11/4 .759 1 1 15 /
16
11/4 x 1/2 x 11/4 .690
11/4 x 1 x 1/2
11/4 x 3/4 x 1/2
11/4 x 3/4 x 3/4
11/4 x 3/4 x 1
1 17 /
32
31 /
32
.674 31 /
32
1 5 /
32
1 5 /
8
.682 15 /
16
1 9 /
32
1 5 /
8
.565 3 /
4
1 7 /
32
1 1 /
32
.709 31 /
32
1 1 /
4
1 5 /
16
11/4 x 3/4 x 11/4 .698
11/4 x 1 x 3/4
11/4 x 1 x 1
11/4 x 11/4 x 1/2
11/4 x 11/4 x 3/4
11/4 x 11/4 x 1
1 9 /
32
15 /
16
.753 27 /
32
1 3 /
16
1 13 /
32
.725 31 /
32
1 7 /
32
1 9 /
32
.408 1 1 1 17 /
32
.589 23 /
32
23 /
32
15 /
16
.508 7 /
8
7 /
8
31 /
32
11/2 1.179
1 29 /
32
1
/
32
11/2 x 1/2 x 11/2 1.263
11/2 x 3/4 x 3/4 1.101 29 /
32
1 13 /
16
1 3 /
4
11/2 x 1 x 3/4
11/2 x 1 x 1
1.217 15 /
16
1 3 /
4
1 13 /
16
1.105 13 /
16
1 11 /
16
1 19 /
32
11/2 x 1 x 11/2 1.146 21 /
32
1 1 /
8
11/2 x 11/4 x 3/4
11/2 x 11/4 x 1
1.164 31 /
32
1 5 /
8
1 7 /
8
1.105 7 /
8
1 19 /
32
1 5 /
8
11/2 x 11/4 x 11/4 1.160 1 9 /
16
1 19 /
32
11/2 x 11/2 x 1/2
11/2 x 11/2 x 3/4
.639 3 /
8
3 /
8
1 1 /
8
.740 19 /
32 19
/
32
1 3 /
32
11/2 x 11/2 x 1 .785 11 /
16 11
/
16
1 3 /
16
11/2 x 11/2 x 11/4 1.262 7 /
8
1 19 /
32
1.771 1 13 /
32
1 13 /
32
1 13 /
32
1.663 1 13 /
32
2 1 /
2
1 7 /
16
1.764 1 13 /
32
2 1 /
4
2 7 /
32
2
2 x 1/2 x 2
2 x 1 x 1
2 x 1 x 2
2 x 11/4 x 11/4
2 x 11/2 x 3/4
2 x 11/2 x 1
2 x 11/2 x 11/4
2 x 11/2 x 11/2
2 x 11/2 x 2
2 x 2 x 1/2
2 x 2 x 3/4
2 x 2 x 1
2 x 2 x 11/4
2 x 2 x 11/2
2 1/2
21/2 x 3/4 x 21/2
21/2 x 1 x 21/2
21/2 x 11/4 x 21/2
21/2 x 11/2 x 21/2
1.564 1 13 /
32
2 5 /
32
1 13 /
32
1.471 1 11 /
32
2 1 /
16
2 1 /
8
1.542 1 11 /
32
1 29 /
32
2 1 /
4
1.546 1 3 /
8
1 29 /
32
2 1 /
4
1.543 1 3 /
8
1 29 /
32
2 5 /
32
1.670 1 1 /
8
1 9 /
16
1 13 /
32
1.787 1 5 /
32
1 11 /
16
1 1 /
2
1.576 1 3 /
8
1 3 /
8
2 7 /
16
1.256 3 /
4
3 /
4
1 1 /
2
1.530 29 /
32 29
/
32
1 11 /
16
1.576 1 3 /
8
1 3 /
8
2 1 /
8
1.770 1 1 /
8
1 1 /
8
1 1 /
2
2.082 1 9 /
16
1 9 /
16
1 7 /
8
2.294 1 21 /
32
2 7 /
8
1 13 /
16
2.004 1 1 /
2
2 1 /
2
1 25 /
32
2.081 1 21 /
32
2 17 /
32
1 13 /
16
2.973 1 25 /
32
2 7 /
16
1 7 /
8
1 15 /
16
2 7 /
16
2 3 /
8
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
www.nibco.com
Revised 1/27/2022
NOM. SIZE
APPROX.
NET WT.
LBS. C
DIMENSIONS
INCHES
F G
21/2 x 2 x 3/4
21/2 x 2 x 1
21/2 x 2 x 11/4
21/2 x 2 x 11/2
21/2 2 x 2
21/2 x 2 x 3
21/2 x 2 x 21/2
21/2 x 21/2 x 1/2
21/2 x 21/2 x 3/4
21/2 x 21/2 x 1
21/2 x 21/2 x 11/4
21/2 x 21/2 x 11/2
21/2 x 21/2 x 2
3
3 x 3/4 x 3
3 x 1 x 3
2.934 1 13 /
16
1 31 /
32
2 15 /
16
2.907 1 27 /
32
2 1 /
32
2 3 /
4
2.954 1 11 /
16
2 2 19 /
32
2.976 1 23 /
32
2 2 15 /
32
3.046 1 13 /
16
1 31 /
32
2 1 /
4
3.580 2 17 /
32
2 3 /
4
2 3 /
8
2.150 1 13 /
16
1 31 /
32
1 7 /
8
2.117 1 21 /
32
1 21 /
32
3 1 /
4
2.011 1 9 /
16
1 9 /
16
2 15 /
16
2.010 1 11 /
16
1 11 /
16
2 3 /
4
2.075 1 21 /
32
1 21 /
32
2 21 /
32
2.966 1 27 /
32
1 27 /
32
2 1 /
2
2.957 1 25 /
32
1 25 /
32
2 1 /
4
3.122 1 15 /
16
1 15 /
16
2 1 /
32
3.049 1 7 /
8
3 1 /
2
2 3 /
16
3.043 1 7 /
8
3 3 /
16
2 3 /
16
3 x 11/4 x 3
3 x 11/2 x 3
3 x 2 x 2
3 x 2 x 21/2
3 x 2 x 3
3 x 21/2 x 2
3 x 21/2 x 21/2
3 x 21/2 x 3
2.986 1 7 /
8
2 15 /
16
2 1 /
8
3.811 2 1 /
32
2 25 /
32
2 13 /
32
3.829 1 31 /
32
2 21 /
32
2 3 /
4
3.761 2 1 /
32
2 21 /
32
2 1 /
2
3.866 2 2 21 /
32
2 3 /
8
3.081 1 7 /
8
2 7 /
16
2 13 /
16
3.010 1 13 /
16
2 15 /
32
2 1 /
2
3.194 1 13 /
16
2 15 /
32
2 3 /
16
3 x 3 x 1/2
3 x 3 x 3/4
3 x 3 x 1
3 x 3 x 11/4
2.945 1 7 /
8
1 7 /
8
3 17 /
32
2.941 1 7 /
8
1 7 /
8
3 1 /
2
2.987 1 7 /
8
1 7 /
8
3 5 /
16
2.957 1 7 /
8
1 7 /
8
2 15 /
16
3 x 3 x 11/2
3 x 3 x 2
3.056 1 7 /
8
1 7 /
8
2 13 /
16
3.145 1 7 /
8
1 7 /
8
2 11 /
16
3 x 3 x 21/2 3.034 1 15 /
16
1 15 /
16
2 1 /
2
4
4 x 2 x 4
4 x 21/2 x 4
4 x 3 x 2
7.169 2 13 /
32
2 13 /
32
2 17 /
32
7.069
6.984
6.965
2
2
2
3
3
3
/
/
/
8
8
8
3
3
3
19
25
9 /
/
/
32
32
16
2
2
3
19
23
25
/
/
/
32
32
32
4 x 3 x 21/2 6.990
2 3 /
8
3 9 /
16
3 29 /
32
4 x 3 x 3
4 x 3 x 4
4 x 4 x 1/2
4 x 4 x 3/4
4 x 4 x 2
7.085
2 3 /
8
3 9 /
16
3 1 /
2
6.993
2 3 /
8
3 23 /
32
2 23 /
32
4.328
1 11 /
32
1 11 /
32
3 11 /
32
4.415
1 11 /
32
1 11 /
32
3 5 /
16
4 x 4 x 1 4.414
1 11 /
32
1 11 /
32
3 1 /
8
4 x 4 x 11/4 4.730
1 7 /
16
1 7 /
16
3 3 /
32
4 x 4 x 11/2 7.144
2 11 /
32
2 11 /
32
3 31 /
32
7.094
2 11 /
32
2 11 /
32
3 13 /
4 x 4 x 21/2 6.925
2 3 /
8
2 3 /
8
3 29 /
32
4 x 4 x 3 7.083
2 3 /
8
2 3 /
8
3 1 /
2
16
9
A H E A D O F T H E F L O W ®
TEES
(Cont.)
UNIONS
(Cont.) www.nibco.com
Revised 1/27/2022
ACCESSORIES
PC612
Tee P x P x F – Wrot
NOM. SIZE
APPROX. DIMENSIONS
NET WT. INCHES
LBS. E F G
1/2 .257
1 31 /
32
23 /
32
23 /
32
3/4
3/4 x 3/4 x 1/4
3/4 x 3/4 x 1/2
1 x 1 x 1/2
1 x 1 x 3/4
11/4 x 11/4 x 1/2
11/4 x 11/4 x 3/4
11/2 x 11/2 x 1/2
11/2 x 11/2 x 3/4
2 x 2 x 1/2
2 x 2 x 3/4
21/2 x 21/2 x 3/4 1.049 2 15 /
21/2 x 21/2 x 2
3 x 3 x 3/4
3 x 3 x 2
4 x 4 x 3/4
4 x 4 x 2
.434 2 11 /
32
25 /
32 25
/
32
.385 23 /
32
23 /
32
2 1 /
32
.258
2 5 /
32
21 /
32
21 /
32
.393 2 1 /
4
21 /
32
21 /
32
.516 2 27 /
32
21 /
32
21 /
32
.494 2 13 /
32 5
/
8
5 /
8
.679 2
.733 2
.885 2
1.699 3
5
11
7
27
/
/
/
/
8
16 3
8 19
32
1.370 3 3 /
16
3 /
4
3 /
4
32
1.925 3 7 /
32
1.435 2 3 /
4
2.097 3 15 /
32
11
1
11 /
1 9 /
16
32
11 /
16
2.786 3 1 /
4
3.675 4 1 9 /
32
11 /
1 9 /
11 /
16
32
16
21 /
32
21 /
32
11
3
/
/
/
/
/
16
8
8
16
1
11
1
3
32 19
11 /
9
/
/
/
3
/
/
16
8
32
8
16
32
UNIONS
PC633-3
Union P x F – Wrot
NOM. SIZE
1/2
3/4
1
11/4
11/2
2
APPROX.
NET WT./LBS.
DIM. A
INCHES
.374
.527
.841
1.178
1 7 /
16
1 17 /
32
1 5 /
8
1 15 /
16
1.610 1 29 /
32
2.445 2 5 /
32
PC633-4
Union P x M – Wrot
NOM. SIZE
1/2
3/4
1
11/4
11/2
2
APPROX.
NET WT./LBS.
DIM. A
INCHES
.386
.567
1 13 /
16
1 29 /
32
.842 2 5 /
32
1.316 2 3 /
8
1.756 2 13 /
32
2.789 2 3 /
4
EPDM Seal (leak detection)
SIZE
1/2
3/4
1
11/4
11/2
2
PART
No.
T048352 PP Leak Detect
T048354 PP Leak Detect
T048356 PP Leak Detect
T048358 PP Leak Detect
T048360 PP Leak Detect
T048362 PP Leak Detect
NOTE: Do NOT use with PC-FP600A-LF
Large Diameter EPDM Seal
(leak detection)
SIZE
21/2
3
4
PART
No.
T048364 PP Leak Detect
T048366 PP Leak Detect
T048368 PP Leak Detect
PC633
Union P x P – Wrot
NOM. SIZE
1/2
3/4
1
11/4
11/2
2
APPROX.
NET WT./LBS.
DIM. A
INCHES
.383
.527
.804
1.107
1 5 /
16
1 9 /
32
1 11 /
32
1 19 /
32
1.703 1 21 /
32
2.368 1 27 /
32
PC634
Tailpiece P x F BSP
NOM. SIZE
APPROX.
NET WT./LBS.
DIM. A
INCHES
1/2 X 1
3/4 X 1
1 X 1
0.1840
0.2230
0.2320
15
15
21
/
32
/
32
/
32
1 X 11/4 0.3530 3 /
8
EPDM Seal (leak detection for PC-FP600A-LF ONLY)
SIZE
PART
No.
1/2 T048370 PP PC-FP600A-LF
3/4 T048372 PP PC-FP600A-LF
1
11/4
11/2
2
T048374 PP
T048376 PP
T048378 PP
T048380 PP
PC-FP600A-LF
PC-FP600A-LF
PC-FP600A-LF
PC-FP600A-LF
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25%
Press Installation Gauge
SIZE
11/2 - 2
PART
No.
K700001PC
Visit our website for the most current information.
10
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
Valves
www.nibco.com
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
11
A H E A D O F T H E F L O W ® www.nibco.com
Revised 1/6/2022
NIBCO ® Press System Illustrated Valve Index
PC-585HP-LF and PC-585HP-66-LF
Lead-Free Bronze Ball Valve
• Two-piece lead-free ball valve
• Full Port, 250 psi CWP
• Copper press end w/ leak detection
• Reversible handle, triple-sealed stem
• Sizes 1/2” thru 4”
Page 14, 15
PC-585-70 and PC-585-70-66
Bronze Ball Valve
• Press x Press Female End
• Full Port, Blowout-Proof Stem
• Standard Lever Handle
• 250 psi CWP
• Sizes 1/2" thru 2"
Page 18, 19
TPC-585HP-LF
Lead-Free Bronze Ball Valve
• Two-piece lead-free ball valve
• Full Port, 250 psi CWP
• Copper press end x Threaded
• Reversible handle, triple-sealed stem
• Sizes 1/2” thru 2”
Page 16
TPC-585-70 and TPC-585-70-66
Bronze Ball Valve
• Press Female End x NPT
• Full Port, Blowout-Proof Stem
• Standard Lever Handle
• 250 psi CWP
• Sizes 1/2" thru 2"
Page 20, 21
PC-585-80-LF and PC-585-66-LF
Lead-Free Bronze Ball Valve
• Press x Press Female End
• Full Port, Blowout-Proof Stem
• Standard Lever Handle
• 250 psi CWP
• Sizes 1/2" thru 3"
Page 24, 25
PC-585-80-LF-HC and PC-585-66-LF-HC
Lead-Free Bronze Ball Valve
• Press Female End x Hose
• Full Port, Blowout-Proof Stem
• Standard Lever Handle
• 250 psi CWP
• Sizes 1/2" and 3/4"
Page 26, 27
PC-585HP-LF-HC
Lead-Free Bronze Ball Valve
• Two-piece lead-free ball valve
• Full Port, 250 psi CWP
• Copper press end with Hose Cap
• Reversible handle, triple-sealed stem
• Sizes 1/2” thru 2”
Page 17
PC-585-70-HC and PC-585-70-66-HC
Bronze Ball Valve
• Press Female End x Hose
• Full Port, Blowout-Proof Stem
• Standard Lever Handle
• Blow Down, End of Line
• Hose Cap with Chain
• 250 psi CWP
• Sizes 1/2" and 3/4"
Page 22, 23
TPC-585-80-LF and TPC-585-66-LF
Lead-Free Bronze Ball Valve
• Press Female End x NPT
• Full Port, Blowout-Proof Stem
• 250 psi CWP
• Sizes 1/2" thru 2"
Page 28, 29
PC-585-80-LF-SR and PC-585-80-LF-HC-SR
Lead-Free Bronze Ball Valve
• Press x Press
• HC: Press x Hose
• Full Port, Blowout-Proof Stem
• 250 psi CWP
• Sizes 1/2" thru 2"
• HC: Sizes 1/2" and 3/4"
Page 30, 31
PC-FP-600A-LF-W
Lead Free DZR Brass Ball Valve
• Press x Press with Wing Handle
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" - 1"
Page 36
PC-FP-600A-D-LF
Lead Free DZR Brass Ball Valve
• Press x Press with Drain/Bleeder
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" - 1"
Page 39
PC-595-Y/R-LF and PC-595-Y/R-66-LF
Lead-Free Bronze Ball Valve
• Three-piece Body
• Full Port, Blowout-Proof Stem
• Standard and SS Trim
• Press End Leak Detection
• 250 psi CWP
• Sizes 1/2" thru 21/2"
Page 32, 33
PCMT-FP-600A-LF
Lead Free DZR Brass Ball Valve
• Press x MIP
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" - 1"
Page 37
PC-FP-600A-LF-HC
Lead Free DZR Brass Ball Valve
• Press x Hose Cap
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" - 3/4"
Page 40
PC-FP-600A-LF
Lead-Free DZR Brass Ball Valve
• Press x Press Female End
• Full Port, Blowout-Proof Stem
• Press End Leak Detection
• 250 psi CWP
• Sizes 1/2" thru 4"
Page 34, 35
PCT-FP-600A-LF
Lead Free DZR Brass Ball Valve
• Press x FIP
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" - 1"
Page 38
PCPXA-FP-600A-LF
Lead Free DZR Brass Ball Valve
• Press x PEX F1960 Cold Expansion
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" - 2"
Page 41
NOTE: Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the press system.
Visit our website for the most current information.
12
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ® Press System Illustrated Valve Index www.nibco.com
Revised 7/24/2020
PCPX-FP-600A-LF
Lead Free DZR Brass Ball Valve
• Press x PEX F1807 Crimp
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" - 2"
Page 42
PCSU-FP-600A-LF
Lead Free DZR Brass Ball Valve
• Press x Solder Union
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" thru 1"
Page 45
PC-FP485-LF
Lead Free DZR Brass Press Ball & Check Valve
• All-in-one Ball & Check (Press x Press)
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" thru 1 1/2"
Page 48
PF-211-Y
Bronze Globe Valve
• Press x Press Female End
• PTFE Resilient Seat
• 200 psi CWP
• Sizes 1/2" thru 2"
Page 53
PCFU-FP-600A-LF
Lead Free DZR Brass Ball Valve
• Press x FIP Union
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" - 1"
Page 43
PCU-FP600A-LF
Lead Free DXR Brass Press Union Ball Valve
• Press x Press Union
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" thru 1"
Page 46
PF-111 and PC-111-LF
Bronze and Lead-Free Bronze Gate Valve
• Press x Press Female End
• Rising Stem
• Press End Leak Detection
• 250 psi CWP
• Sizes 1/2" thru 2" (PF-113)
• Sizes 1/2" thru 3"
Page 49, 50
PF-311-Y
Bronze Angle Valve
• Press x Press Female End
• PTFE Resilient Seat
• 200 psi CWP
• Sizes 1/2" thru 2"
Page 54
PCMU-FP-600A-LF
Lead Free DZR Brass Ball Valve
• Press x MIP Union
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" thru 1"
Page 44
PC-FP600A-S-LF
Lead Free DZR Brass Press Slip Ball Valve
• Press x Press Slip
• Press End Leak Detection
• Full Port, Blowout-Proof Stem
• 250 psi
• Sizes 1/2" thru 1"
Page 47
PF-113 and PC-113-LF
Bronze and Lead-Free Bronze Gate Valve
• Press x Press Female End
• Non-Rising Stem
• Press End Leak Detection
• 250 psi CWP
• Sizes 1/2" thru 2" (PF-113)
• Sizes 1/2" thru 3" (PC-113-LF)
Page 51, 52
PC-413-Y-LF
Bronze Swing Check Valve
• Lead-Free
• Press x Press Female End
• PTFE Seat
• 200 psi CWP
• Sizes 1/2" thru 2"
Page 55
PF-413-Y
Bronze Swing Check Valve
• Press x Press Female End
• PTFE Seat
• 200 psi CWP
• Sizes 1/2" thru 2"
Page 57
PF-480-Y
Bronze In-Line Check Valve
• Press x Press Female End
• PTFE Seat, Stainless Internals
• 200 psi CWP
• Sizes 1/2" thru 2"
Page 58
PFD-2000 Series
Ductile Iron Butterfly Valve
• Press x Press Female End
• Molded-in Liner
• Aluminum Bronze Disc
• Standard Lever Handle or Gear Operated
• 200 psi CWP
• Sizes 2 1/2" thru 4"
Page 59
PS-585-70
PS-585-70-66
Bronze Ball Valve
• Press x Press Male End
• 2" Type L Copper
• Full Port, Blowout-Proof Stem
• Standard Lever Handle
• 600 psi CWP
• Sizes 1/2" thru 2"
Page 60, 61
PS-585-70-HC
Bronze Ball Valve
• Press Male x Hose End
• 2" Type L Copper
• Full Port, Blowout-Proof Stem
• Standard Lever Handle
• Blown Down, End of Line
• Hose Cap with Chain
• 600 psi CWP
• Sizes 1/2" and 3/4"
Page 62
PF-221/222-A/B
Bronze Y-Strainer
• Press x Press Female End
• Tapped cap w/ blow-off plug or solid cap
• 20 Mesh SS Screen or
SS Perforated Screen
• 200 psi CWP
• Sizes 1/2" thru 2"
Page 63
NOTE: Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the press system.
NOTE: Check valves are down-rated from 250 psi CWP to 200 psi CWP to match the press system.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
13
A H E A D O F T H E F L O W ® www.nibco.com
Revised 1/6/2022
NIBCO® 585HP Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze® Alloy • Laser-Welded Cast Body •
Triple-Sealed Stem • Reversible Handle • Easily Adjustable Packing Nut •
Blowout-Proof Stem • Press Ends Leak Detection
Approvals: MSS-SP110/145 • IAPMO/ANSI Z1157 • NSF/ANSI/CAN 61-8 Commercial Hot 180° F •
NSF/ANSI 372 • ICC-ES PMG-1558 • ASME A112.4.14/CSA B125.14
Pressure/Temperature Rating:
PC-585HP (1/2”-2”): 250 psi non-shock cold working pressure*
PC-585HP (21/2”-4”): 200 psi non-shock cold working pressure*
Maximum pressure/temperature: 225 psi at 250° F* (1/2”-2”)
200 psi at 250° F* (21/2”-4”)
Lead-free markings: Double oval in body casting, white handle and blue hang tag
PART
1. Handle Nut
2. Handle Stop
3. Stem
4. Packing
5. Packing Nut
6. Stem O-ring (2)
7. O-ring (2)
8. Boss Seal O-ring (2)
9. Body
10. Seats (2)
11. Ball
12. Body End Piece
13. Press End Adapter (2)
14. Handle
MATERIAL LIST
SPECIFICATION
Carbon Steel, GEOMET® Coated
ASTM A276 S31600 Stainless Steel
ASTM C69300 Lead-free Silicon Bronze
PTFE
ASTM B16 C36000 Brass
Qmonix® EPDM
EPDM - Leak Detection
EPDM
ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting
Reinforced PTFE
ASTM B584 C46500 DZR Lead-free Brass (1/2" - 1")
ASTM A276 S31600 or A351 CF8M Stainless Steel (11/4" -4")
ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting
ASTM B75 Alloy C12200 Wrot Copper
Carbon Steel, GEOMET® Coated, Plastisol Grip
United States Patent
No. 10,234,043 &
United States Patent
No. 11,131,403
PC-585HP-LF
Press
PC-585HP-66-LF with stainless steel trim also available.
1558
Handle Options:
• NIB-Seal® (1/4”-2”)
• Locking Lever
• Stainless Steel
• Extended Lever w/
Memory Stop
PC-585HP-LF
DIMENSIONS - WEIGHTS
Size A B C D E F G Weights
In.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm. lbs.
kg
1/2” 5.93 151 4.04 103 2.03
52 2.66
68 0.50
13 3.77
96 2.37
60 0.80 0.36
3/4” 6.65 169 4.18 106 2.31
59 3.17
81 0.75
19 4.93 125 3.01
76 1.21 0.55
1” 7.35 187 4.75 121 2.74
70 3.78
96 1.00
25 5.19 132 3.42
87 1.58 0.72
11/4” 7.95 202 5.06 129 2.92
74 4.12 105 1.25
32 5.78 147 3.76
96 2.27 1.03
11/2” 10.25 260 6.75 171 3.22
82 4.64 118 1.50
38 7.01 178 4.24 108 3.55 1.61
2” 11.03 280 7.12 181 3.68
93 5.46 139 2.00
51 7.80 198 4.78 121 6.26 2.84
2.5” 16.86 428 12.06 306 4.41 112 6.62 168 2.50
63 9.61 244 6.67 169 14.80 6.71
3” 17.31 439 12.06 306 4.71 119 7.26 184 3.00
76 10.51 267 7.19 182 17.13 7.77
4” 18.60 472 12.06 306 5.52 140 8.88 225 4.00 101 13.08 332 8.76 222 28.45 12.90
Handle Markings
*NIBCO® Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from T-585HP rated CWP to the specified rating above to match the Press System.
GEOMET® is a registered trademark of NOF Metal Coatings, Inc.
QMONIX® is a trademark of Quadion LLC
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
14
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 1/6/2022
NIBCO® 585HP Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze® Alloy • Laser-Welded Cast Body •
Triple-Sealed Stem • Stainless Trim • Reversible Handle • Easily Adjustable Packing Nut •
Blowout-Proof Stem • Press Ends Leak Detection
Approvals: MSS-SP110/145 • IAPMO/ANSI Z1157 • NSF/ANSI/CAN 61-8 Commercial Hot 180° F •
NSF/ANSI 372 • ICC-ES PMG-1558 • ASME A112.4.14/CSA B125.14
Pressure/Temperature Rating:
PC-585HP (1/2”-2”): 250 psi non-shock cold working pressure*
PC-585HP (21/2”-4”): 200 psi non-shock cold working pressure*
Maximum pressure/temperature: 225 psi at 250° F* (1/2”-2”)
200 psi at 250° F* (21/2”-4”)
Lead-free markings: Double oval in body casting, white handle and blue hang tag
PART
1. Handle Nut
2. Handle Stop
3. Stem
4. Packing
5. Packing Nut
6. Stem O-ring (2)
7. O-ring (2)
8. Boss Seal O-ring (2)
9. Body
10. Seats (2)
11. Ball
12. Body End Piece
13. Press End Adapter (2)
14. Handle
MATERIAL LIST
SPECIFICATION
Carbon Steel, GEOMET® Coated
ASTM A276 S31600 Stainless Steel
ASTM A276 S31600 Stainless Steel
PTFE
ASTM B16 C36000 Brass
Qmonix® EPDM
EPDM - Leak Detection
EPDM
ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting
Reinforced PTFE
ASTM A276 S31600 or A351 CF8M Stainless Steel
ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting
ASTM B75 Alloy C12200 Wrot Copper
Carbon Steel, GEOMET® Coated, Plastisol Grip
United States Patent
No. 10,234,043 &
United States Patent
No. 11,131,403
1558
PC-585HP-66-LF
Press
Handle Options:
• NIB-Seal® (1/4”-2”)
• Locking Lever
• Stainless Steel
• Extended Lever w/
Memory Stop
PC-585HP-66-LF
DIMENSIONS - WEIGHTS
Size A B C D E F G Weights
In.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm. lbs.
kg
1/2” 5.93 151 4.04 103 2.03
52 2.66
68 0.50
13 3.77
96 2.37
60 0.80 0.36
3/4” 6.65 169 4.18 106 2.31
59 3.17
81 0.75
19 4.93 125 3.01
76 1.21 0.55
1” 7.35 187 4.75 121 2.74
70 3.78
96 1.00
25 5.19 132 3.42
87 1.58 0.72
11/4” 7.95 202 5.06 129 2.92
74 4.12 105 1.25
32 5.78 147 3.76
96 2.27 1.03
11/2” 10.25 260 6.75 171 3.22
82 4.64 118 1.50
38 7.01 178 4.24 108 3.55 1.61
2” 11.03 280 7.12 181 3.68
93 5.46 139 2.00
51 7.80 198 4.78 121 6.26 2.84
2.5” 16.86 428 12.06 306 4.41 112 6.62 168 2.50
63 9.61 244 6.67 169 14.80 6.71
3” 17.31 439 12.06 306 4.71 119 7.26 184 3.00
76 10.51 267 7.19 182 17.13 7.77
4” 18.60 472 12.06 306 5.52 140 8.88 225 4.00 101 13.08 332 8.76 222 28.45 12.90
Handle Markings
*NIBCO® Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from T-585HP rated CWP to the specified rating above to match the Press System.
GEOMET® is a registered trademark of NOF Metal Coatings, Inc.
QMONIX® is a trademark of Quadion LLC
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
15
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/21/2021
NIBCO® 585HP Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze® Alloy • Laser-Welded Cast Body •
Triple-Sealed Stem • Reversible Handle • Easily Adjustable Packing Nut •
Blowout-Proof Stem • Press Ends Leak Detection
Approvals: MSS-SP110/145 • IAPMO/ANSI Z1157 • NSF/ANSI/CAN 61-8 Commercial Hot 180° F •
NSF/ANSI 372 • ICC-ES PMG-1558 • ASME A112.4.14/CSA B125.14
Size range: 1/2” - 2”
Pressure rating: 250 psi non-shock cold working pressure*
Body design pressure: 1,000 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F*
Lead-free markings: Double oval in body casting, white handle and blue hang tag
PART
1. Handle Nut
2. Handle Stop
3. Stem
4. Packing
5. Packing Nut
6. Stem O-ring (2)
7. O-ring (2)
8. Boss Seal O-ring (2)
9. Body
10. Seats (2)
11. Ball
12. Body End Piece
13. Press End Adapter (2)
14. Handle
MATERIAL LIST
SPECIFICATION
Carbon Steel, GEOMET® Coated
ASTM A276 S31600 Stainless Steel
ASTM C69300 Lead-free Silicon Bronze
ASTM A276 316 Stainless Steel
PTFE
ASTM B16 C36000 Brass
Qmonix® EPDM
EPDM - Leak Detection
EPDM
ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting
Reinforced PTFE
ASTM B584 C46500 DZR Lead-free Brass (1/2" - 1")
ASTM A276 or A351 CF8M Stainless Steel (11/4" -2")
ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting
ASTM B75 Alloy C12200 Wrot Copper
Carbon Steel, GEOMET® Coated, Plastisol Grip
United States Patent
No. 10,234,043 &
United States Patent
No. 11,131,403
TPC-585HP-LF
Press x Thread
TPC-585HP-66-LF with stainless steel trim also available.
1558
Handle Options:
• NIB-Seal®
• Locking Lever
• Extended Lever w/ Memory Stop
TPC-585HP-LF
DIMENSIONS - WEIGHTS
Size A B C D E F G Weights
In.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm. lbs.
kg
1/2” 5.11 129.8 4.04 102.6 2.03 51.6 2.65 67.3 0.50 12.7 3.08 78.2 2.39 60.7 0.740 0.336
3/4” 5.52 140.2 4.18 106.2 2.31 58.7 3.20 81.3 0.75 19.1 3.93 99.8 2.97 75.4 1.293 0.586
1” 6.30 160.0 4.75 120.7 2.74 69.6 3.80 96.5 1.00 25.4 4.27 108.5 3.38 85.9 1.761 0.799
11/4” 6.75 171.5 5.06 128.5 2.92 74.2 4.15 105.4 1.25 31.8 4.71 119.6 3.70 94.0 2.714 1.231
11/2” 8.65 219.7 6.75 171.5 3.22 81.8 4.65 118.1 1.50 38.1 5.53 140.5 4.15 105.4 3.903 1.770
2” 9.29 236.0 7.12 180.8 3.68 93.5 5.45 138.4 2.00 50.8 6.20 157.5 4.69 119.1 5.893 2.673
585 HP
Patent US 10,234,043 & Patent Pending
Handle Markings
*NIBCO® Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 1000 psi CWP to 250 psi CWP to match the Press System.
GEOMET® is a registered trademark of NOF Metal Coatings, Inc.
QMONIX® is a trademark of Quadion LLC
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
16
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/21/2021
NIBCO® 585HP Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze® Alloy • Laser-Welded Cast Body •
Triple-Sealed Stem • Reversible Handle • Easily Adjustable Packing Nut •
Blowout-Proof Stem • Hose Cap and Chain • Press Ends Leak Detection
Approvals: MSS SP-110/145 • NSF/ANSI 61/372 • IAPMO/ANSI Z1157
Size range: 1/2”, 3/4”
Pressure rating: 250 psi non-shock cold working pressure*
Body design pressure: 1,000 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F*
Lead-free markings: Double oval in body casting, white handle and blue hang tag
PART
1. Handle Nut
2. Handle Stop
3. Stem
4. Packing
5. Packing Nut
6. Stem O-ring (2)
7. Press End Adapter
8. Crimp Evident Seal
9. Press O-ring
10. Seats (2)
11. Ball
12. Body
13. Body End Piece
14. Hose Cap Assembly
15. Handle
MATERIAL LIST
SPECIFICATION
Carbon Steel, GEOMET® Coated
ASTM A276 S31600 Stainless Steel
ASTM C69300 DZR Lead-free Silicon Brass
ASTM A276 316 Stainless Steel
PTFE
ASTM B16 C36000 Brass
Qmonix® EPDM
C12200 Wrought Copper
EPDM
EPDM
Reinforced PTFE
ASTM B584 46500 DZR Lead-free Brass
ASTM A276 or A351 CF8M Stainless Steel
ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting
ASTM B371 C69300 DZR Lead-free Silicon Brass
HPB58-3 Brass
Carbon Steel, GEOMET® Coated, Plastisol Grip
United States Patent
No. 10,234,043 &
United States Patent
No. 11,131,403
PC-585HP-LF-HC
Press x Hose Cap
PC-585HP-66-LF-HC with stainless steel trim also available.
PC-585HP-LF-HC
585 HP
Patent US 10,234,043 & Patent Pending
DIMENSIONS - WEIGHTS
Size A B C D E F G Weights
In.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm. lbs.
kg
1/2” 5.93
150.62
4.04
102.62
2.03 51.56 2.69 68.33 0.50 12.70 3.65 92.71 2.55 64.77 0.780 0.354
3/4” 6.65
168.91
4.18
106.17
2.31 58.67 3.18 80.77 0.75 19.05 4.26 108.20 2.89 73.41 1.112 0.504
Note: 1. Cap is for hose end thread protection only. Not to be used for pressure containing purposes.
*NIBCO® Press System ball valves are designed to meet MSS SP-110, with the exception of the end connection. Ball valves are downrated from 1000 psi CWP to 250 psi CWP to match the Press System.
GEOMET® is a registered trademark of NOF Metal Coatings, Inc.
QMONIX® is a trademark of Quadion LLC
Handle Markings
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
17
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Ball Valves
Two-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem • Press Ends Leak Detection
250 psi/17.2 bar non-shock cold working pressure
250°F maximum operating temperature
CONFORMS TO MSS SP-110
MATERIAL LIST
PART SPECIFICATION
1. Body
2. Body End
Bronze ASTM B584 Alloy C84400
Bronze ASTM B584 Alloy C84400
3. Press End Adapter (2) Wrot Copper ASTM B75 Alloy C12200
4. Ball Brass ASTM B16 Alloy C36000
5. Seat Ring (2) or ASTM B283 Alloy C37700 (Chrome/Nickel Plated)
Reinforced PTFE
6. Boss seal o-ring (2)
7. O-Ring (2)
8. Packing
9. Pack Gland
10. Stem
11. Handle Nut
12. Thrust Washer
13. Handle Assembly
EPDM
EPDM
PTFE
Brass ASTM B16 Alloy C36000
Silicon Bronze ASTM B371 Alloy C69300 or ASTM B99 Alloy C65100
Zinc Plated Steel
Reinforced PTFE
Zinc Plated Steel Clear Chromate Plastisol Coated
PC-585-70
Press x Press
Female End www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
Handle Options:
• Stainless steel lever
• NIB-SEAL ®
• Locking lever
• Stainless steel locking lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
PC-585-70
P x P
DIMENSIONS—WEIGHTS
Dimensions
SIZE A B C D E Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.
Kg.
1/2” 13 2.76 70 1.90 48 6.00 152 .50
13 4.15 105 .80
.36
3/4” 19 3.28 83 2.28 58 7.29 185 .75
19 5.05 128 1.56
.71
1” 25 3.59 91 2.41 61 7.34 186 1.00 25 5.36 136 2.13 1.00
1 1/4 ” 32 4.62 117 3.05 77 10.04 255 1.25 32 6.64 169 3.73 1.69
1 1/2 ” 38 5.23 133 3.30 84 10.72 272 1.50 38 8.00 203 5.53 2.51
2” 50 5.63 143 3.51 89 11.05 281 2.00 50 8.65 220 7.95 3.61
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the
NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
18
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Ball Valves
Two-Piece Body • Full Port • Stainless Trim • Blowout-Proof Stem • Vented Ball •
Press Ends Leak Detection
250 psi/17.2 bar non-shock cold working pressure
250°F maximum operating temperature
CONFORMS TO MSS SP-110
MATERIAL LIST
PART SPECIFICATION
1. Body
2. Body End
Bronze ASTM B584 Alloy C84400
Bronze ASTM B584 Alloy C84400
3. Press End Adapter (2) Wrot Copper ASTM B75 Alloy C12200
4. Ball (vented) Stainless Steel ASTM A276 Type 316 or
5. Seat Ring (2)
ASTM A351 Type CF8M
Reinforced PTFE
6. Boss Seal O-Ring (2) EPDM
7. O-Ring (2) EPDM
8. Packing
9. Pack Gland
10. Stem
PTFE
Brass ASTM B16 Alloy C36000
Stainless Steel ASTM A276 Alloy S31600
11. Handle Nut
12. Thrust Washer
13. Handle Assembly
300 Series Stainless Steel
Reinforced PTFE
Zinc Plated Steel Clear Chromate
Plastisol Coated
PC-585-70-66
Press x Press
Female End www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
Handle Options:
• Stainless steel lever
• NIB-SEAL ®
• Locking lever
• Stainless steel locking lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
DIMENSIONS—WEIGHTS
SIZE A B
Dimensions
C D E Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.
Kg.
1/2” 13 2.76 70 1.90 48 6.00 152 .50
13 4.15 105 .77
.35
3/4” 19 3.28 83 2.28 58 7.29 185 .75
19 5.05 128 1.55
.70
1” 25 3.59 91 2.40 61 7.34 186 1.00 25 5.36 136 2.29 1.04
1 1/4 ” 32 4.62 117 3.05 77 10.04 255 1.25 32 6.64 169 3.80 1.72
1 1/2 ” 38 5.23 133 3.30 84 10.72 272 1.50 38 8.00 203 5.60 2.54
2” 50 5.63 143 3.51 89 11.05 281 2.00 50 8.65 220 8.69 3.94
PC-585-70-66
P x P
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the
NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
19
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Ball Valves
Two-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem • Press Ends Leak Detection
250 psi/17.2 bar non-shock cold working pressure
250°F maximum operating temperature
PART
1. Handle Nut
2. Stem
3. Pack Gland
4. Packing, Stem
5. Thrust Washer
6. Handle Assembly
7. Body End
8. Seat Ring (2)
9. Ball
10. Body
11. Boss seal o-ring
12. O-Ring
13. Press End Adapter
CONFORMS TO MSS SP-110
MATERIAL LIST
SPECIFICATION
Zinc Plated Steel
Silicon Bronze ASTM B371 Alloy C69300 or ASTM B371 Alloy C69430
Brass ASTM B16 Alloy C36000
PTFE
Reinforced PTFE
Zinc Plated Steel with Plastisol Coating
Bronze ASTM B584 Alloy C84400
Reinforced PTFE
Brass ASTM B16 Alloy C36000 or ASTM B283 Alloy C37700 (Chrome/Nickel Plated)
Bronze ASTM B584 Alloy C84400
EPDM
EPDM
Wrot Copper ASTM B75 Alloy C12200
TPC-585-70
Thread x Press
Female www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
Handle Options:
• Stainless steel lever
• NIB-SEAL ®
• Locking lever
• Stainless steel locking lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
DIMENSIONS—WEIGHTS—QUANTITIES
SIZE A B
Dimensions
C D E Weight Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.
Kg. Ctn. Qty.
1/2” 15 3.38 86 3.96 101 1.96 50 0.50 13 1.86 47 0.85 0.39
50
3/4” 20 4.08 104 4.76 121 2.28 58 0.75 19 2.42 61 1.50 0.68
1” 25 4.44 113 4.76 121 2.48 63 1.00 25 2.71 69 2.00 0.91
1 1/4 ” 32 5.46 139 6.75 171 3.09 78 1.25 32 3.67 93 3.55 1.61
1 1/2 ” 40 6.27 159 6.75 171 3.32 84 1.50 38 4.15 105 4.90 2.22
2” 50 6.99 176 6.75 171 3.56 90 2.00 51 4.64 118 6.90 3.13
30
20
12
6
6
TPC-585-70
NPT x P
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the
NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
20
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Bronze Ball Valves
Two-Piece Body • Full Port • Stainless Trim • Blowout-Proof Stem • Vented Ball •
Press Ends Leak Detection
250 psi/17.2 bar non-shock cold working pressure
250°F maximum operating temperature
CONFORMS TO MSS SP-110
PART
1. Handle Nut
2. Stem
3. Pack Gland
4. Packing, Stem
5. Thrust Washer
6. Handle Assembly
7. Body End
8. Seat Ring (2)
9. Ball (vented)
10. Body
11. Boss seal o-ring
12. O-Ring
13. Press End Adapter
MATERIAL LIST
SPECIFICATION
300 Series Stainless Steel
Stainless Steel ASTM A276 Type 316
Brass ASTM B16 Alloy C36000
PTFE
Reinforced PTFE
Zinc Plated Steel Clear Chromate
Plastisol Coated
Bronze ASTM B584 Alloy C84400
Reinforced PTFE
Stainless Steel ASTM A276 Alloy S31600 or
ASTM A351 Type CF8M
Bronze ASTM B584 Alloy C84400
EPDM
EPDM
Wrot Copper ASTM B75 Alloy C12200
TPC-585-70-66
Thread x Press
Female
Dezincification
Resistant
Handle Options:
• Stainless steel lever
• NIB-SEAL ®
• Locking lever
• Stainless steel locking lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
SIZE A B C D E Weight Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.
Kg.
Ctn. Qty.
1/2” 15 3.10 79 3.96 101 1.96 50 0.50 13 1.86 47 0.85 0.39
50
3/4” 20 3.96 101 4.76 121 2.28 58 0.75 19 2.45 62 1.50 0.68
1” 25 4.47 114 4.76 121 2.48 63 1.00 25 2.92 74 2.00 0.91
1 1/4 ” 32 4.99 127 6.75 171 3.09 78 1.25 32 3.30 84 3.55 1.61
1 1/2 ” 40 5.90 150 6.75 171 3.32 84 1.50 38 3.84 98 4.90 2.22
2” 50 6.61 168 6.75 171 3.56 90 2.00 51 4.38 111 6.90 3.13
30
20
12
6
6
TPC-585-70-66
NPT x P
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the
Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
21
A H E A D O F T H E F L O W ® www.nibco.com
Revised 10/15/2019
NIBCO ® Press System Bronze Ball Valves
Two-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem•
3/4" Hose Connection w/Cap and Chain • Press Ends Leak Detection
250 psi/17.2 bar non-shock cold working pressure
250°F maximum operating temperature
PART
1. Press End Adapter
2. Body
3. Hose Body End
4. Cap
5. O-Ring
6. Boss seal o-ring
7. Ball
8. Packing
9. Pack Gland
10. Stem
11. Handle Nut
12. Thrust Washer
13. Handle Assembly
14. Seat Ring (2)
CONFORMS TO MSS SP-110
MATERIAL LIST
SPECIFICATION
Wrot Copper ASTM B75 Alloy C12200
Bronze ASTM B584 Alloy C84400
Brass ASTM B124 Alloy C37700
Die Cast Brass
EPDM
EPDM
Brass ASTM B16 Alloy C36000 or ASTM B283 Alloy C37700 (Chrome/Nickel Plated)
PTFE
Brass ASTM B16 Alloy C36000
Silicon Bronze ASTM B371 Alloy C69300 or ASTM B371 Alloy C69430
Zinc Plated Steel
Reinforced PTFE
Zinc Plated Steel Clear Chromate
Plastisol Coated
Reinforced PTFE
PC-585-70-HC
Press Female x Hose End
Handle Options:
• Stainless steel lever
• NIB-Seal ®
• Locking lever
• Stainless steel locking lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
SIZE
DIMENSIONS—WEIGHTS
A B
Dimensions
C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.
Kg.
1/2" 13 3.06 78 1.88 48 6.09 155 .50
13 .92
.42
3/4" 19 4.47 114 2.25 57 7.36 187 .75
19 1.70
.77
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi
CWP to 250 psi CWP to match the NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
PC-585-70-HC
P x Hose
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
22
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 10/15/2019
NIBCO ® Press System Bronze Ball Valves
Two-Piece Body • Full Port • Stainless Trim • Blowout-Proof Stem • Vented Ball •
3/4" Hose Connection with Cap and Chain • Press Ends Leak Detection
250 psi/17.2 bar non-shock cold working pressure
250°F maximum operating temperature
PART
1. Press End Adapter
2. Body
3. Hose Body End
4. Cap
5. O-Ring
6. Boss seal o-ring
7. Ball (vented)
8. Packing
9. Pack Gland
10. Stem
11. Handle Nut
12. Thrust Washer
13. Handle Assembly
14. Seat Ring (2)
CONFORMS TO MSS SP-110
MATERIAL LIST
SPECIFICATION
Wrot Copper ASTM B75 Alloy C12200
Bronze ASTM B584 Alloy C84400
Brass ASTM B124 Alloy C37700
Die Cast Brass
EPDM
EPDM
Stainless Steel ASTM A276 Alloy S31600 or ASTM A351 Type CF8M
PTFE
Brass ASTM B16 Alloy C36000
Stainless Steel ASTM A276 Alloy S31600
300 Series Stainless Steel
Reinforced PTFE
Zinc Plated Steel Clear Chromate
Plastisol Coated
Reinforced PTFE
PC-585-70-66-HC
Press Female x Hose End
Handle Options:
• Stainless steel lever
• NIB-Seal ®
• Locking lever
• Stainless steel locking lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
SIZE
DIMENSIONS—WEIGHTS
A B
Dimensions
C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.
Kg.
1/2" 13 2.76 70 1.88 48 6.09 155 .50
13 .92
.42
3/4" 19 3.28 83 2.25 57 7.36 187 .75
19 1.70
.77
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi
CWP to 250 psi CWP to match the Press System. Male and female press-toconnect ends are new technology not yet covered in the current edition of this specification.
PC-585-70-66-HC
P x Hose
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
23
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/21/2021
NIBCO
®
Press System Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze ®
Full Port • Blowout-Proof Stem
Two-Piece Body • Press Ends Leak Detection •
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372-8 Commercial Hot 180°F
Size range: 1/2” - 3”
Pressure rating: 250* PSI non-shock cold working pressure
Body design pressure: 600 PSI CWP non-shock cold working pressure
Maximum pressure / temperature: 225 PSI at 250° F*
Lead-free markings: Double oval in body casting, white handle and blue hang tag
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut
2. Stem
3. Pack Gland
4. Packing, Stem
5. Thrust Washer
6. Handle Assembly
7. Body End
8. Seat Ring (2)
9. Ball (vented)
Zinc Plated Steel
Silicon Bronze ASTM B371 Alloy C69300
Brass ASTM B16 Alloy C36000
PTFE
Reinforced PTFE
Zinc Plated Steel Clear Chromate Plastisol Coated
Silicon Bronze ASTM B584 Alloy C87600
Reinforced PTFE
DZR Brass SAE J461 C46500 (1/4"-1")
Stainless Steel ASTM A276 S31600 or ASTM A351 CF8M (11/4"-3")
10. Body Silicon Bronze ASTM B584 Alloy C87600
11. Boss seal o-ring (2) EPDM
12. O-Ring (2) EPDM - Leak Detection
13. Press End Adapter (2) Wrot Copper ASTM B75 Alloy C12200
United States Patent
No. 10,234,043 &
United States Patent
No. 11,131,403
Dezincification
Resistant
PC-585-80-LF
Press x Press
Female End
Handle Options:
• Stainless Steel Lever
• NIB-Seal®
• NIB-Seal® Locking Lever
• Locking Lever
• Stainless Steel Locking Lever
• Memory Stop
• Extended Lever w/ Memory Stop
• Round
• Wing
• Horizontal and Vertical Chain
Handle Markings
SIZE
DIMENSIONS—WEIGHTS—QUANTITIES
A B C D E Weight
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
Lbs.
1/2 15 3.93
100 3.96
101 1.96
50 0.50
13 2.53
64 0.80
Kg.
0.36
3/4
1
20 5.00
127 4.76
121 2.28
58 0.75
19 3.23
82 1.56
0.71
25 5.61
142 4.76
121 2.48
63 1.00
25 3.84
98 2.13
1.00
11/4 32 6.23
158 6.76
172 3.10
79 1.25
32 4.21 107 3.73
1.69
11/2 40 7.56
192 6.76
172 3.32
84 1.50
38 4.79 122 5.53
2.51
PC-585-80-LF
P x P
2 50 8.40
213 6.76
172 3.56
90 2.00
51 5.36 136 7.95
3.61
21/2 65 9.49
241 8.06
205 4.33
110 2.50
64 6.55 166 16.20
7.35
3 76 10.45 265 8.06
205 4.58
116 2.95
75 7.13 181 16.50
7.48
*200 PSI CWP and 200 PSI at 200°F for 21/2" and above
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 PSI CWP to 250 PSI CWP to match the
Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
LEAD-FREE: Weighted average lead content ≤ 0.25%
24
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/21/2021
NIBCO
®
Press System Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze ®
Blowout-Proof Stem • Stainless Trim
Two-Piece Body • Copper Ends • Full Port •
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 •
NSF/ANSI 61/372-8 Commercial Hot 180°F
Size range: 1/2” - 3”
Pressure rating: 250* PSI non-shock cold working pressure
Body design pressure: 600 PSI CWP
Maximum pressure / temperature: 225 PSI at 250° F*
Lead-free markings: Double oval in body casting, white handle and blue hang tag
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut
2. Stem
3. Pack Gland
4. Packing, Stem
5. Thrust Washer
6. Handle Assembly
7. Body End
8. Seat Ring (2)
Zinc Plated Steel
Stainless Steel ASTM A276 Type 316
Brass ASTM B16 Alloy C36000
PTFE
Reinforced PTFE
Plated Steel with Plastisol Coating
Silicon Bronze ASTM B584 Alloy C87600
Reinforced PTFE
9. Ball (vented)
10. Body
11. Boss seal o-ring (2)
12. O-Ring (2)
Stainless Steel ASTM A276 Type 316
Silicon Bronze ASTM B584 Alloy C87600
EPDM
EPDM - Leak Detection
13. Press End Adapter (2) Wrot Copper ASTM B75 Alloy C12200
PC-585-66-LF
Press x Press
Female End
United States Patent
No. 10,234,043 &
United States Patent
No. 11,131,403
Dezincification
Resistant
Handle Options:
• Stainless Steel Lever
• NIB-Seal ®
• NIB-Seal ® Locking Lever
• Locking Lever
• Stainless Steel Locking Lever
• Memory Stop
• Extended Lever w/ Memory Stop
• Round
• Wing
• Horizontal and Vertical Chain
Handle Markings
SIZE
DIMENSIONS—WEIGHTS—QUANTITIES
A B C D E Weight
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
Lbs.
1/2 15 3.93
100 3.96
101 1.96
50 0.50
13 2.53
64 0.80
Kg.
0.36
PC-585-66-LF
P x P
3/4
1
20 5.00
127 4.76
121 2.28
58 0.75
19 3.23
82 1.56
0.71
25 5.61
142 4.76
121 2.48
63 1.00
25 3.84
98 2.13
1.00
1-1/4 32 6.23
158 6.76
172 3.10
79 1.25
32 4.21 107 3.73
1.69
1-1/2 40 7.56
192 6.76
172 3.32
84 1.50
38 4.79 122 5.53
2.51
2 50 8.40
213 6.76
172 3.56
90 2.00
51 5.36 136 7.95
3.61
2-1/2 65 9.49
241 8.06
205 4.33
110 2.50
64 6.55 166 16.20
7.35
3 76 10.45 265 8.06
205 4.58
116 2.95
75 7.13 181 16.50
7.48
*200 PSI CWP and 200 PSI at 200°F for 21/2" and above
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 PSI CWP to 250 PSI CWP to match the Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
25
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/17/2019
NIBCO ® Press System Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze ® Alloy • Two-Piece Body • Full Port •
Blowout-Proof Stem • Copper End x 3/4" Hose Connection with Cap and Chain
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372
Size range: 1/2” & 3/4”
Pressure rating: 250 PSI non-shock cold working pressure
Lead-free markings: Double oval in body casting, white handle and blue hang tag
MATERIAL LIST
PART SPECIFICATION
2. Stem
3. Pack Gland
4. Packing
Zinc Plated Steel
Silicon Bronze ASTM B371 Alloy C69300
Brass ASTM B16 Alloy C36000
PTFE
Reinforced PTFE
7. Hose Body End
8. Ball
9. Seat Ring (2)
10. Body
11. Boss seal o-ring
Zinc Plated Steel with Plastisol Coating
Silicon Bronze ASTM B371 Alloy C69300
Silicon Bronze ASTM B283 Alloy C69300
Reinforced PTFE
Silicon Bronze ASTM B584 Alloy C87600
EPDM
12. O-Ring EPDM
13. Press End Adapter Wrot Copper ASTM B75 Alloy C12200
14. Hose Cap Assembly 1 Die Cast Brass, EPDM Gasket, Soft PVC Retainer
1
Cap is for hose end thread protection only. Not to be used for pressure containing purposes.
PC-585-80-LF-HC
Press Female x Hose End
Dezincification
Resistant
Handle Options:
• Stainless Steel Lever
• NIB-Seal ®
• NIB-Seal ® Locking Lever
• Locking Lever
• Stainless Steel Locking Lever
• Memory Stop
• Extended Lever w/ Memory Stop
• Round
• Wing
• Horizontal and Vertical Chain
Handle Markings
SIZE A
DIMENSIONS—WEIGHTS—QUANTITIES
B C D E F G Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
1/2 15 3.61 92 3.76 96 1.96 50 0.50 13 5.93 151 1.53 39 0.70 18 12.70 0.42
3/4 20 4.32 110 4.76 121 2.28 58 0.75 19 7.28 185 1.95 50 0.96 24 1.70 0.77
PC-585-80-LF-HC
P x Hose
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
26
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/17/2019
NIBCO ® Press System Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze ® Alloy • Two-Piece Body • Full Port • Stainless Trim •
Blowout-Proof Stem • Copper Ends x 3/4" Hose Connection with Cap
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372
Size range: 1/2” & 3/4”
Pressure rating: 250 PSI non-shock cold working pressure
Lead-free markings: Double oval in body casting, white handle and blue hang tag
MATERIAL LIST
PART SPECIFICATION
2. Stem
3. Pack Gland
4. Packing
Zinc Plated Steel
Stainless Steel ASTM A276 Type 316
Brass ASTM B16 Alloy C36000
PTFE
7. Hose Body End
8. Ball (vented)
9. Seat Ring (2)
10. Body
Reinforced PTFE
Zinc Plated Steel with Plastisol Coating
Silicon Bronze ASTM B371 Alloy C69300
Stainless Steel ASTM A276 Type 316
Reinforced PTFE
Silicon Bronze ASTM B584 Alloy C87600
11. Boss seal o-ring EPDM
12. O-Ring EPDM
13. Press End Adapter Wrot Copper ASTM B75 Alloy C12200
14. Hose Cap Assembly1 Die Cast Brass, EPDM Gasket, Soft PVC Retainer
1 Cap is for hose end thread protection only. Not to be used for pressure containing purposes.
Dezincification
Resistant
PC-585-66-LF-HC
Press Female x Hose End
Handle Options:
• Stainless Steel Lever
• NIB-Seal ®
• NIB-Seal® Locking Lever
• Locking Lever
• Stainless Steel Locking Lever
• Memory Stop
• Extended Lever w/ Memory Stop
• Round
• Wing
• Horizontal and Vertical Chain
Handle Markings
SIZE A
DIMENSIONS—WEIGHTS—QUANTITIES
B C D E F G Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
1/2 15 3.61 92 3.76 96 1.96 50 0.50 13 5.93 151 1.31 33 0.70 18 0.92 0.42
3/4 20 4.32 110 4.76 121 2.28 58 0.75 19 7.28 185 1.62 41 0.96 24 1.70 0.77
PC-585-66-LF-HC
P x Hose
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
27
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze ®
Blowout-Proof Stem
Body • Press Ends Leak Detection • Full Port •
Approvals: MSS SP-110 • IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61-8
Commercial Hot 180°F (includes annex F and G) and NSF/ANSI-372
Pressure rating: 250 psi non-shock cold working pressure
Body design pressure: 600 psi non-shock cold working pressure
Maximum pressure / temperature: 200 psi at 250° F
Lead-Free markings: Double oval in body casting, white handle and blue hang tag
Dezincification
Resistant
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut
2. Stem
3. Pack Gland
4. Packing, Stem
Zinc Plated Steel
Silicon Bronze ASTM B371 Alloy C69300
Brass ASTM B16 Alloy C36000
PTFE
5. Thrust Washer Reinforced PTFE
6. Handle Assembly Zinc Plated Steel Clear Chromate Plastisol Coated
7. Body End
8. Seat Ring (2)
9. Ball
Silicon Bronze ASTM B584 Alloy C87600
Reinforced PTFE
Silicon Bronze ASTM B283 Alloy C69300 or SAE J461 C46500 (1/2" - 1")
Silicon Bronze ASTM B283 Alloy C69300 or ASTM A276, Alloy S31600 (1 1/4" - 2")
10. Body
11. Boss seal o-ring
Silicon Bronze ASTM B584 Alloy C87600
EPDM
12. O-Ring EPDM
13. Press End Adapter Wrot Copper ASTM B75 Alloy C12200
TPC-585-80-LF
Thread x Press
Female
Handle Options:
• Stainless steel lever
• NIB-SEAL ®
• Locking lever
• Stainless steel locking lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
Handle Markings
TPC-585-80-LF
NPT x P
NOM SIZE A B C
DIMENSIONS—WEIGHTS
D E F G J Weight Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.
Kg.
Lbs.
Kg.
Lbs.
Kg. Ctn. Qty.
1/2 15 3.1
79 3.96 101 1.96 50 0.5 13 1.86 47 1.2 30 0.7
18 5.93
151 0.80 0.36
50
3/4 20 3.96 101 4.76 121 2.28 58 0.75 19 2.45 62 1.56 40 0.96
24 7.33
186 1.35 0.61
30
1 25 4.47 114 4.76 121 2.48 63 1 25 2.92 74 1.97 50 0.89
23 7.56
192 1.90 0.86
1-1/4 32 4.99 127 6.76 172 3.1
79 1.25 32 3.3 84 2.31 59 1.01
26 9.86
250 3.20 1.45
1-1/2 40 5.9 150 6.76 172 3.32 84 1.5 38 3.84 98 2.84 72 1.39
35 10.53 267 4.40 2.00
2 50 6.61 168 6.76 172 3.56 90 2 51 4.38 111 3.54 90 1.51
38 10.94 278 6.45 2.93
20
12
6
6
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the
Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
28
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze ®
Blowout-Proof Stem • Stainless Trim
Body • Copper End • Full Port •
Approvals: MSS SP-145 • IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61-8
Commercial Hot 180°F (includes annex F and G) and NSF/ANSI-372
Pressure rating: 250 psi non-shock cold working pressure
Body design pressure: 600 psi CWP
Maximum pressure / temperature: 200 psi at 250° F
Lead-Free markings: Double oval in body casting, white handle and blue hang tag
Dezincification
Resistant
PART
1. Handle Nut
2. Stem
3. Pack Gland
4. Packing, Stem
5. Thrust Washer
6. Handle Assembly
7. Body End
8. Seat Ring (2)
9. Ball (vented)
10. Body
11. Boss seal o-ring
12. O-Ring
13. Press End Adapter
MATERIAL LIST
SPECIFICATION
Plated Steel
Stainless Steel ASTM A276 Type 316
Brass ASTM B16 Alloy C36000
PTFE
Reinforced PTFE
Plated Steel with Plastisol Coating
Silicon Bronze ASTM B584 Alloy C87600
Reinforced PTFE
Stainless Steel ASTM A276 Type 316
Silicon Bronze ASTM B584 Alloy C87600
EPDM
EPDM
Wrot Copper ASTM B75 Alloy C12200
TPC-585-66-LF
Thread x Press
Female
Handle Options:
• Stainless Steel Lever
• NIB-SEAL ®
• Locking lever
• Stainless Steel Locking Lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
Handle Markings
TPC-585-66-LF
NPT x P
NOM SIZE A B C
DIMENSIONS—WEIGHTS
D E F G J Weight Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.
Kg.
Lbs.
Kg.
Lbs.
Kg. Ctn. Qty.
1/2 15 3.1
79 3.96 101 1.96 50 0.5 13 1.86 47 1.2 30 0.7
18 5.93
151 0.80 0.36
50
3/4 20 3.96 101 4.76 121 2.28 58 0.75 19 2.45 62 1.56 40 0.96
24 7.33
186 1.35 0.61
1 25 4.47 114 4.76 121 2.48 63 1 25 2.92 74 1.97 50 0.89
23 7.56
192 1.90 0.86
1-1/4 32 4.99 127 6.76 172 3.1
79 1.25 32 3.3 84 2.31 59 1.01
26 9.86
250 3.20 1.45
1-1/2 40 5.9 150 6.76 172 3.32 84 1.5 38 3.84 98 2.84 72 1.39
35 10.53 267 4.40 2.00
30
20
12
6
2 50 6.61 168 6.76 172 3.56 90 2 51 4.38 111 3.54 90 1.51
38 10.94 278 6.45 2.93
6
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the
Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
29
A H E A D O F T H E F L O W ® www.nibco.com
Revised 4/3/2020
Lead-Free Bronze Ball Valves with Spring Return Handle
Spring Return Handle to Close • Press Ends Leak Detection • Silicon Performance Bronze® Alloy •
Two-Piece Body • Full Port • Blowout-Proof Stem
250 PSI/17 bar non-shock cold working pressure
Lead-free markings: Double oval in body casting, white handle and blue hang tag
Dezincification
Resistant
MSS SP-110/145 • NSF/ANSI/CAN 61-8 COMMERCIAL HOT 180° F • NSF/ANSI 372
PART
MATERIAL LIST
SPECIFICATION
1. Body ASTM B584 C87600 DZR Lead-free Silicon Bronze Casting
2. Body End Piece
3. Seats (2)
ASTM B584 C87600 DZR Lead-free Silicon Bronze Casting
Reinforced PTFE
4. Ball (Vented)
5. Stem
6. Thrust Washer
7. Stem Packing
8. Threaded Pack Gland
9. Handle assembly
10. Lock Washer
11. Handle Nut
ASTM B584 C46500 DZR Lead-free Brass (1/2" - 1")
ASTM A276 S31600 or A351 CF8M Stainless Steel (11/4" -2")
ASTM C69300 Lead-free Silicon Bronze
Reinforced PTFE
Virgin PTFE
Brass ASTM B16 Alloy C36000
Stainless Steel Type 316 and 304 with Vinyl Cover
Stainless Steel
Stainless Steel
12. Mounting Plate Stainless Steel ASTM A351 Type CF8M
13. Socket Head Cap Screw (2) Stainless Steel Type 304
14. Hex Shoulder Bolt
15. Press End Adapter (2)
16. Boss Seal (2)
17. Press End Seal (2)
Stainless Steel
ASTM B75 Alloy C12200 Wrot Copper
EPDM
EPDM (Leak Detection)
L
PC-585-80-LF-SR
Press x Press
LB
LA
Carbon Steel and Stainless Steel
Ball Valve options available.
See Ball Valve Catalog.
H
D B
PC-585-80-LF-SR
Press x Press
A
Size
DIMENSIONS—WEIGHTS
Dimensions
A B C H L LA LB
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm. Lbs. Kg
1/2
3/4
1
12.70
3.95
100 1.57
40 0.50
13 1.73
44 7.11
181 4.84
123 5.79
147 1.43
0.65
19.05
5.10
130 2.00
51 0.75
19 2.01
51 7.28
185 4.92
125 6.04
153 2.16
0.98
25.40
5.56
141 1.97
50 1.00
25 2.22
56 7.28
185 4.92
125 6.04
153 2.76
1.25
1 1/4 31.75
6.23
158 2.31
59 1.25
32 2.69
68 9.51
242 6.50
165 7.62
194 4.43
2.01
1 1/2 38.10
7.55
192 2.84
72 1.50
38 2.91
74 9.51
242 6.50
165 7.62
194 5.33
2.42
2 50.80
8.38
213 3.54
90 2.00
51 3.15
80 9.51
242 6.50
165 7.62
194 7.63
3.46
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 PSI CWP to 250
PSI CWP to match the Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
LEAD-FREE: Weighted average lead content ≤ 0.25%
30
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 4/3/2020
Lead-Free Bronze Ball Valves with Spring Return Handle
Spring Return Handle to Close • Press End Leak Detection • 3/4” Hose Connection w/ Cap •
Silicon Performance Bronze® Alloy • Two-Piece Body • Full Port • Blowout-Proof Stem
250 PSI/17 bar non-shock cold working pressure
Lead-free markings: Double oval in body casting, white handle and blue hang tag
Dezincification
Resistant
MSS SP-110/145 • NSF/ANSI/CAN 61-8 COMMERCIAL HOT 180° F • NSF/ANSI 372
PART
MATERIAL LIST
SPECIFICATION
1. Body ASTM B584 C87600 DZR Lead-free Silicon Bronze Casting
2. Body End Piece
3. Seats (2)
4. Ball (Vented)
5. Stem
6. Thrust Washer
ASTM B371 C69300
Reinforced PTFE
ASTM B584 C46500 DZR Lead-free Brass
ASTM C69300 Lead-free Silicon Bronze
Reinforced PTFE
7. Stem Packing
8. Threaded Pack Gland
9. Handle assembly
10. Lock Washer
Virgin PTFE
Brass ASTM B16 Alloy C36000
Stainless Steel Type 316 and 304 with Vinyl Cover
Stainless Steel
11. Handle Nut
12. Mounting Plate
Stainless Steel
Stainless Steel ASTM A351 Type CF8M
13. Socket Head Cap Screw (2) Stainless Steel Type 304
14. Hex Shoulder Bolt Stainless Steel
15. Press End Adapter
16. Boss Seal
17. Press End Seal
18. Hose cap Assembly
ASTM B75 Alloy C12200 Wrot Copper
EPDM
EPDM (Leak Detection)
Die Cast Brass, EPDM Gasket, Soft PVC Retainer
PC-585-80-LF-HC-SR
Press x Hose
LB
LA
L
Carbon Steel and Stainless Steel
Ball Valve options available.
See Ball Valve Catalog.
H
D B
PC-585-80-LF-HC-SR
Press x Hose
A
DIMENSIONS—WEIGHTS
Dimensions
1/2
Size A B C H L LA LB
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm. Lbs. Kg
12.70
3.82
97 1.57
40 0.50
13 1.73
44 7.11
181 4.84
123 5.79
147 1.38
0.63
3/4 19.05
4.50
114 2.00
51 0.75
19 2.90
74 7.28
185 4.92
125 6.04
153 2.11
0.96
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from
600 PSI CWP to 250 PSI CWP to match the Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25%
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
31
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/17/2019
NIBCO ® Press Lead-Free Three Piece Bronze Ball Valves
Features: Silicon Performance Bronze ®
Full Port • Blowout-Proof Stem
Alloy • Three-Piece Body • Press Ends Leak Detection •
Approvals: MSS SP-110/145 • Truesdail NSF/ANSI/CAN
61-2018 Commercial Hot 180°F, NSF/ANSI 372
Dezincification
Resistant
NSF/ANSI/CAN
61-2018 Size range: 1/2” - 2-1/2”
Pressure rating: 250 psi non-shock cold working pressure*
Maximum pressure / temperature: 225 psi at 250° F*
Lead-free markings: Double oval in body casting, white handle and blue hang tag
PART
1. Body Nuts
2. Handle Nut
3. Threaded Pack Gland
4. Body
5. Body End (2)
6. Handle
7. Ball
8. Seats (2)
9. Body Bolts
10. O-ring (2)
11. Grounding Washer
12. Thrust Washer
13. Stem Packing
14. Stem
15. Press End Adapter (2)
16. O-Ring (2)
17. Boss Seal O-ring (2)
MATERIAL LIST
SPECIFICATION
Zinc Dichromate Plated Steel
ASTM A449 Grade 5
Zinc Plated Steel
Brass ASTM B16 Alloy C36000
Silicon Bronze ASTM B584 Alloy C87850
Silicon Bronze ASTM B584 Alloy C87850
Steel, Plated Plastisol Coated
DZR Brass SAE J461 C46500 (1/4”-1”)
Stainless Steel ASTM A276 S31600 or ASTM A351
CF8M (11/4”-21/2”)
PTFE “Y” or RPTFE “R” Glass Reinforced
Zinc Dichromate Plated Steel
ASTM A449 Grade 5
FKM
Stainless Steel- ASTM A-167 304
Reinforced PTFE
PTFE
Silicon Bronze ASTM B371 Alloy C69300
Wrot Copper ASTM B75 Alloy C12200
EPDM (Leak Detection)
EPDM
PC-595-Y-LF
PC-595-R-LF
Press
Handle Markings
DIMENSIONS - WEIGHTS - QUANTITIES
Size A B
In.
In.
1/2” 2.482
3/4” 3.048
1” 3.505
11/4” 3.758
mm.
63
77
89
95
In.
1.794
1.991
2.484
2.718
mm.
46
51
63
69
In.
0.629
0.881
1.132
1.382
11/2” 4.24
108 3.045
77 1.633
2” 6.404
163 4.042
103 2.134
21/2” 7.071
180 5.09
129 2.631
C mm.
16
22
29
35
41
54
67
D
In.
1.942
2.277
2.469
3.092
3.335
3.556
85
90
4.322
110 mm.
49
58
63
79
E
In.
3.96
mm.
In.
101 0.968
4.762
121 1.281
4.762
121 1.643
6.75
171 1.83
6.75
6.75
8.06
171 2.205
171 2.72
205 3.513
*200 PSI CWP and 200 PSI at 200°F for 21/2” and above
F Weights mm.
lbs.
25 1.14
kg
0.52
33
42
46
1.91
0.87
2.84
1.29
4.36
1.98
56
69
89
5.73
2.60
11.12
5.04
18.79
8.52
Master
Ctn. Qty.
8
4
2
40
25
15
10
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
32
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/17/2019
NIBCO ® Press Lead-Free Three Piece Bronze Ball Valves
Features: Silicon Performance Bronze ® Alloy • Three-Piece Body • Press Ends Leak Detection •
Stainless Steel Trim• Full Port • Blowout-Proof Stem
Approvals: MSS SP-110/145 • Truesdail NSF/ANSI/CAN
61-2018 Commercial Hot 180°F, NSF/ANSI 372
Dezincification
Resistant
NSF/ANSI/CAN
61-2018 Size range: 1/2” - 2-1/2”
Pressure rating: 250 psi non-shock cold working pressure*
Maximum pressure / temperature: 225 psi at 250° F*
Lead-free markings: Double oval in body casting, white handle and blue hang tag
PART
1. Body Nuts
2. Handle Nut
3. Threaded Pack Gland
4. Body
5. Body End (2)
6. Handle
7. Ball
8. Seats (2)
9. Body Bolts
10. O-ring (2)
11. Grounding Washer
12. Thrust Washer
13. Stem Packing
14. Stem
15. Press End Adapter (2)
16. O-Ring (2)
17. Boss Seal O-ring (2)
MATERIAL LIST
SPECIFICATION
Zinc Dichromate Plated Steel
ASTM A449 Grade 5
Zinc Plated Steel
Brass ASTM B16 Alloy C36000
Silicon Bronze ASTM B584 Alloy C87850
Silicon Bronze ASTM B584 Alloy C87850
Steel, Plated Plastisol Coated
Stainless Steel ASTM A276 Type S31600
PTFE “Y” or RPTFE “R” Glass Reinforced
Zinc Dichromate Plated Steel
ASTM A449 Grade 5
FKM
Stainless Steel- ASTM A-167 304
Reinforced PTFE
PTFE
Stainless Steel ASTM A276 Type 316
Wrot Copper ASTM B75 Alloy C12200
EPDM (Leak Detection)
EPDM
PC-595-Y-66-LF
PC-595-R-66-LF
Press
Handle Markings
DIMENSIONS - WEIGHTS - QUANTITIES
Size A B
In.
In.
1/2” 2.482
3/4” 3.048
1” 3.505
11/4” 3.758
mm.
63
77
89
95
In.
1.794
1.991
2.484
2.718
mm.
46
51
63
69
In.
0.629
0.881
1.132
1.382
11/2” 4.24
108 3.045
77 1.633
2” 6.404
163 4.042
103 2.134
21/2” 7.071
180 5.09
129 2.631
C mm.
16
22
29
35
41
54
67
D
In.
1.942
2.277
2.469
3.092
3.335
3.556
85
90
4.322
110 mm.
49
58
63
79
E
In.
3.96
mm.
In.
101 0.968
4.762
121 1.281
4.762
121 1.643
6.75
171 1.83
6.75
6.75
8.06
171 2.205
171 2.72
205 3.513
F
*200 PSI CWP and 200 PSI at 200°F for 21/2” and above
Weights mm.
lbs.
25 1.14
kg
0.52
33
42
46
1.91
0.87
2.84
1.29
4.36
1.98
56
69
89
5.73
2.60
11.12
5.04
18.79
8.52
Master
Ctn. Qty.
8
4
2
40
25
15
10
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25%
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
33
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press Ends Leak Detection • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†
Size range: 1/2” - 2”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-Free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and
Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PART
1. Body
2. Seat Seal
3. O-ring
4. Washer
5. Lock Nut
6. Handle
7. Stem
8. Ball
9. End Cap
10. O-ring
11. Metal Ring
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel + Nylon
Steel, Plated
Brass
Chrome Plated Brass - C46500 (1/2"-1")
Stainless Steel 316 (11/4"-2")
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000
Stainless Steel (1-1/4"-2") ‡
PC-FP-600A-LF
Press x Press
1/2" - 2"
(Patent Pending sizes 1-1/4" - 2")
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
Handle Markings
PC-FP-600A-LF
Press x Press
1/2" - 2" ‡
SIZE
In.
1/2
3/4
1
1-1/4 ‡
1-1/2 ‡
2 ‡
In.
4.57
5.71
5.83
6.97
9.06
9.88
A mm.
116
145
148
177
230
251
In.
3.66
4.17
4.17
4.61
6.30
6.30
B
106
106
117
160
160 mm.
93
DIMENSIONS—WEIGHTS—QUANTITIES
C D E
In.
2.09
mm.
53
In.
mm.
0.631
16.03
In.
1.30
mm.
33.0
2.80
3.15
2.52
3.23
3.23
71
80
64
82
82
0.883
22.43
1.140
28.96
1.386
35.20
1.636
41.56
2.137
54.28
1.63
1.83
2.19
2.52
3.39
41.5
46.5
55.5
64.0
86.0
In.
2.87
3.44
3.64
4.43
5.30
6.69
F mm.
73.0
87.5
92.5
112.5
134.5
170.0
Lbs.
0.38
Weight
Kg.
0.17
0.73
1.00
1.70
2.37
3.96
0.33
0.46
0.77
1.08
1.80
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
4. Bending Test
5. Vacuum Test
6. Hydraulic Shock (Water Hammer) Test
7. Vibration Test
8. Thermal Cycling Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
†Tested to the performance criteria of ASME B16.51
‡ Patent Pending
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
LEAD-FREE: Weighted average lead content ≤ 0.25%
34
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press Ends Leak Detection • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†
Size range: 2 1/2” - 4”
Pressure rating: 200 psi non-shock cold working pressure
Maximum pressure / temperature: 200 psi at 200° F
Lead-Free markings: White handle and blue hang tag
Dezincification
Resistant
Applications: Drinking Water • Domestic Hot & Cold Water • HVAC
(condensors, chilled water, hot water heating) • Isolation and Throttling
(half-open to full-open only) • Connect to Rigid Copper Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and Jaw
Compatibility Matrix list.
Not intended for steam or gas usage.
MATERIAL LIST
PART SPECIFICATION
1
PVC
3 Handle Lock Nut Steel
Brass/Bronze
5 Brass/Bronze
6 PTFE
7 Leak Detection O-ring
8 O-ring, Boss Seal
EPDM - ASTM D2000
EPDM - ASTM D2000
PC-FP-600A-LF
Press x Press
2 1/2" - 4"
12 Ball Seat Seal
Brass/Bronze
13 Press End Adaptor w/Leak Detection
PTFE
ASTM B75 Alloy C12200
Options:
• Extended lever
• EPDM Seal for Press Ends Handle Markings
2
PC-FP-600A-LF
Press x Press
2 1/2" - 4"
In.
2 1/2"
3
4
SIZE mm.
15
20
25
In.
13.07
13.67
15.87
A mm.
332
347.2
403.1
In.
8.66
8.66
9.61
B
DIMENSIONS—WEIGHTS—QUANTITIES mm.
220
220
244.1
In.
4.8
5.12
5.98
C mm.
121.9
130
151.9
IAPMO/ANSI Z1157: i n addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
In.
2.52
2.91
3.9
D mm.
64
73.9
99
In.
5.88
6.71
8.21
E mm.
149.3
170.4
208.5
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
4. Bending Test
5. Vacuum Test
6. Hydraulic Shock (Water Hammer) Test
7. Vibration Test
8. Thermal Cycling Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
In.
8.81
10.03
12.53
F mm.
223.7
261.6
318.2
Lbs.
9.55
13.07
26.32
Weight
Kg.
4.33
5.93
11.94
†Tested to the performance criteria of ASME B16.51
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
35
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press Ends Leak Detection • Wing Handle • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†
Size range: 1/2” - 1”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-Free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and
Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PC-FP-600A-LF-W
Press x Press
1/2" - 1"
PART
1. Body
2. Seat Seal
3. O-ring
4. Washer
5. Lock Nut
6. Handle
7. Stem
8. Ball
9. End Cap
10. O-ring
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel + Nylon
Steel, Plated
Brass
Chrome Plated Brass - C46500
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000
Options:
• Extended lever
• EPDM Seal for Press Ends
• Lever Handle
In.
1/2
3/4
1
Size mm.
12.7
19.05
25.40
A
In.
3.11
mm.
79.00
4.25
108.00
4.25
108.00
Handle Markings
PC-FP-600A-LF-W
Press x Press
1/2" - 1"
DIMENSIONS—WEIGHTS—QUANTITIES
B C D
In.
1.45
2.15
2.31
mm.
36.80
54.70
58.70
In.
0.59
0.79
0.98
mm.
15.00
20.00
25.00
In.
1.39
1.70
1.90
mm.
35.20
43.20
48.20
In.
2.96
3.51
3.71
E mm.
75.20
89.20
94.20
Lbs.
0.4230
0.8020
1.0930
Weight
Kg.
0.1918
0.3637
0.4957
†Tested to the performance criteria of ASME B16.51
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
7. Vibration Test
8. Thermal Cycling Test
4. Bending Test
5. Vacuum Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
36
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press End Leak Detection • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†
Size range: 1/2” - 1”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-Free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and
Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PART
1. Body
2. Seat Seal
3. O-ring
4. Washer
5. Lock Nut
6. Handle
7. Stem
8. Ball
9. End Cap
10. O-ring
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel + Nylon
Steel, Plated
Brass
Chrome Plated Brass - C46500 (1/2"-1")
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000
PCMT-FP-600A-LF
Press x MIP
1/2" - 1"
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
Handle Markings
PCMT-FP-600A-LF
Press x Male
1/2" - 1"
In.
1/2
3/4
1
SIZE mm.
12.7
19.05
25.40
In.
5.30
6.07
6.29
A mm.
134.70
154.20
159.70
In.
3.62
DIMENSIONS—WEIGHTS—QUANTITIES
B C D E mm.
92.00
In.
1.34
mm.
34.00
In.
0.59
mm.
15.00
In.
1.60
mm.
In.
40.70
3.00
4.13
105.00
4.13
105.00
2.06
2.21
52.20
56.20
0.79
0.98
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
7. Vibration Test
8. Thermal Cycling Test
4. Bending Test
5. Vacuum Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
20.00
25.00
2.00
2.23
50.70
3.53
56.70
3.89
F mm.
76.20
89.70
98.70
Lbs.
0.4520
Weight
Kg.
0.2050
0.7940
1.1730
0.3601
0.5320
†Tested to the performance criteria of ASME B16.51
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
37
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press End Leak Detection • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†
Size range: 1/2” - 1”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-Free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and
Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PCT-FP-600A-LF
Press x FIP
1/2" - 1"
PART
1. Body
2. Seat Seal
3. O-ring
4. Washer
5. Lock Nut
6. Handle
7. Stem
8. Ball
9. End Cap
10. O-ring
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel + Nylon
Steel, Plated
Brass
Chrome Plated Brass - C46500
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
Handle Markings PCT-FP-600A-LF
Press x FIP
1/2" - 1"
In.
1/2
3/4
1
SIZE mm.
12.7
19.05
25.40
In.
4.75
5.42
5.64
A mm.
120.70
137.70
143.20
In.
3.62
DIMENSIONS—WEIGHTS—QUANTITIES
B C D E mm.
92.00
In.
1.34
mm.
34.00
In.
0.59
mm.
15.00
In.
1.09
mm.
In.
27.70
2.45
4.13
105.00
4.13
105.00
2.06
2.21
52.20
56.20
0.79
0.98
20.00
25.00
1.37
1.62
34.70
2.88
41.20
3.24
F mm.
62.20
73.20
82.20
Lbs.
0.3950
Weight
0.7280
1.0520
Kg.
0.1791
0.3302
0.4771
†Tested to the performance criteria of ASME B16.51
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
7. Vibration Test
8. Thermal Cycling Test
4. Bending Test
5. Vacuum Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
38
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press End Leak Detection • Side Drain/Bleeder • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†
Size range: 1/2” - 1”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-Free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and
Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PC-FP-600A-D-LF
Press x Press with Drain/Bleeder
1/2" - 1" PART
1. Body
2. Seat Seal
3. O-ring
4. Washer
5. Lock Nut
6. Handle
7. Stem
8. Ball
9. End Cap
10. O-ring
11. Washer
12. Nut
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel + Nylon
Steel, Plated
Brass
Chrome Plated Brass - C46500
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000
EPDM
Brass
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
Handle Markings
PC-FP-600A-D-LF
Press x Press with Drain/Bleeder
1/2" - 1"
In.
SIZE mm.
In.
A mm.
In.
B mm.
DIMENSIONS—WEIGHTS—QUANTITIES
In.
C mm.
In.
D mm.
In.
E mm.
In.
F mm.
In.
G mm.
In.
H mm.
Weight
Lbs.
Kg.
1/2 12.7
5.26
133.70
3.62
92.00
1.34
34.00
0.59
15.00
2.15
54.70
3.73
94.70
2.09
53.00
1.44
36.50 0.5220 0.2368
3/4 19.05
6.05
153.70
4.13
105.00
2.06
52.20
0.79
20.00
2.43
61.70
4.24
107.70
2.32
59.00
1.44
36.50 0.8800 0.3991
1 25.40
6.11
155.20
4.13
105.00
2.21
56.20
0.98
25.00
2.61
66.20
4.42
112.20
2.44
62.00
1.59
40.50 1.2610 0.5719
†Tested to the performance criteria of ASME B16.51
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
7. Vibration Test
8. Thermal Cycling Test
4. Bending Test
5. Vacuum Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
39
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press End Leak Detection • 3/4" Hose Connection w/Cap • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†
Size range: 1/2” - 3/4”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-Free markings:
White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and
Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PART
1. Body
2. Seat Seal
3. O-ring
4. Washer
5. Lock Nut
6. Handle
7. Stem
8. Ball
9. End Cap
10. O-ring
11. Washer
12. Nut
13. Cap Retainer
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel + Nylon
Steel, Plated
Brass
Chrome Plated Brass - C46500
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000
EPDM
Brass
NBR
PC-FP-600A-LF-HC
Press x Hose Cap
1/2" - 3/4"
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
Handle Markings
PC-FP-600A-LF-HC
Press x Hose Cap
1/2" - 3/4"
In.
1/2
3/4
SIZE mm.
12.7
19.05
In.
4.51
5.10
A mm.
114.50
129.50
In.
3.62
DIMENSIONS—WEIGHTS—QUANTITIES
B C D E mm.
92.00
In.
1.34
mm.
34.00
In.
0.59
mm.
15.00
In.
1.46
4.13
105.00
2.06
52.20
0.79
20.00
1.74
mm.
In.
37.20
3.11
44.20
3.52
F mm.
79.00
89.50
Lbs.
0.5220
0.8090
Weight
Kg.
0.2368
0.3669
†Tested to the performance criteria of ASME B16.51
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
7. Vibration Test
8. Thermal Cycling Test
4. Bending Test
5. Vacuum Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
40
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 6/26/2019
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press End Leak Detection • PEX end F1960 Cold Expansion • Two-Piece Body • PTFE Seats •
Blowout-Proof Stem • Double Stem Seal
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 14 61/372 • Conforms to ASME B16.51†
Size range: 1/2” - 2”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F
Lead-free markings: White handle and blue hang tag
NSF/ANSI-14 61 & 372
IAPMO/ANSI Z1157
Applications: Drinking Water • Domestic Hot & Cold Water • HVAC (condensors, chilled water, hot water heating) • Isolation and Throttling (half-open to full-open only) •
Connect to Rigid Copper Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Dezincification
Resistant
Reference Press System catalog for updated Approved Tool and Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
MATERIAL LIST
PART SPECIFICATION
1. Body Forged DZR Copper Alloy - C46500
2. Seat Seal (2) PTFE
3. O-ring
4. Packing
EPDM - ASTM D2000
PTFE
5. Washer
6. Lock Nut
7. Handle
Stainless Steel ASTM 321
Stainless Steel 304
Steel, Plated
8. Nut
9. Stem
10. Ball
11. End Cap
12. O-ring
13. Metal Ring
Brass
Brass
Chrome Plated Brass - C46500 (1/2"-1")
Stainless Steel 316 (11/4"-2")
Forged DZR Copper Alloy - C46500 (F1960 Cold Expansion)
EPDM - ASTM D2000 (Leak Detect)
Stainless Steel (11/4"-2") ††
PCPXA-FP-600A-LF
Press x PEX (F1960 - Cold Expansion)
1/2" - 2"
Patent Pending sizes 11/4" - 2"
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
SIZE
In.
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
A
In.
mm.
5.15
130.90
5.48
139.20
6.37
161.70
7.09
180.00
8.31
211.00
10.19
258.80
B
In.
3.62
3.62
92.00
4.13
105.00
4.37
111.00
5.04
128.00
6.22
158.00
Handle Markings
DIMENSIONS—WEIGHTS—QUANTITIES mm.
92.00
In.
1.20
C mm.
30.55
In.
0.39
D mm.
10.00
In.
1.30
E F mm.
In.
mm.
32.90
2.79
70.90
PCPXA-FP-600A-LF
Press x PEX (F1960 - Cold Expansion)
1/2" - 2" ††
Lbs.
0.3400
Weight
Kg.
0.1542
1.34
2.06
2.58
2.70
3.16
34.00
52.20
65.5
68.5
80.2
0.60
0.79
0.98
1.09
1.57
15.30
20.00
25.00
27.80
40.00
1.48
1.74
2.19
2.63
3.12
37.70
3.33
84.70
44.20
3.83
97.20
0.5090
0.8620
55.50
4.75
120.70
1.5400
66.85
5.72
145.40
2.3300
79.20
6.92
175.70
3.6600
0.2308
0.3909
0.6900
1.0600
1.6600
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
† Tested to the performance criteria of ASME B16.51
†† Patent Pending
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
4. Bending Test
5. Vacuum Test
6. Hydraulic Shock (Water Hammer) Test
7. Vibration Test
8. Thermal Cycling Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25%
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
41
A H E A D O F T H E F L O W ® www.nibco.com
Revised 6/26/2019
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press End Leak Detection • PEX End F1807 Crimp • Two-Piece Body • PTFE Seats • Blowout-Proof Stem •
Double Stem Seal
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 14 61/372 • Conforms to ASME B16.51†
Size range: 1/2” - 2”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F
Lead-free markings: White handle and blue hang tag
NSF/ANSI-14 61 & 372
IAPMO/ANSI Z1157
Applications: Drinking Water • Domestic Hot & Cold Water • HVAC (condensors, chilled water, hot water heating) • Isolation and Throttling (half-open to full-open only) •
Connect to Rigid Copper Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
MATERIAL LIST
PART
1. Body
2. Seat Seal (2)
3. O-ring
4. Packing
5. Washer
6. Lock Nut
7. Handle
8. Nut
9. Stem
10. Ball
11. End Cap
12. O-ring
13. Metal Ring
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel ASTM 321
Stainless Steel 304
Steel, Plated
Brass
Brass
Chrome Plated Brass - C46500 (1/2"-1")
Stainless Steel 316 (11/4"-2")
Forged DZR Copper Alloy - C46500 (F1807 Crimp)
EPDM - ASTM D2000 (Leak Detect)
Stainless Steel (11/4"-2") ††
Dezincification
Resistant
PCPX-FP-600A-LF
Press x PEX (F1807 - Crimp)
1/2" - 2"
Patent Pending sizes 1-1/4" - 2"
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
Handle Markings
PCPX-FP-600A-LF
Press x PEX (F1807 - Crimp)
1/2" - 2" ††
SIZE
In.
1/2"
A
In.
mm.
5.11
129.90
In.
3.62
B
DIMENSIONS—WEIGHTS—QUANTITIES mm.
92.00
In.
1.20
C mm.
30.55
In.
0.39
D mm.
10.00
In.
1.30
E F mm.
In.
mm.
32.90
2.75
69.90
Lbs.
0.3280
Weight
Kg.
0.1487
3/4"
1"
1 1/4"
1 1/2"
5.19
5.97
6.61
7.76
131.70
151.70
168.00
197.00
3.62
4.13
4.37
5.04
92.00
105.00
111.00
128.00
1.34
2.06
2.58
2.70
34.00
52.20
65.50
68.50
0.60
0.80
0.87
1.03
15.30
20.30
22.20
26.10
1.50
1.72
2.21
2.63
38.20
43.70
56.20
66.75
3.04
3.43
4.28
5.17
77.20
87.20
108.70
131.40
0.4810
0.7850
1.4400
2.1900
0.2181
0.3560
0.6500
0.9900
2" 9.51
241.50
6.22
158.00
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
3.16
80.20
1.37
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
4. Bending Test
5. Vacuum Test
6. Hydraulic Shock (Water Hammer) Test
34.70
3.09
78.60
6.25
158.70
3.3600
7. Vibration Test
8. Thermal Cycling Test
1.5200
† Tested to the performance criteria of ASME B16.51
†† Patent Pending
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
LEAD-FREE: Weighted average lead content ≤ 0.25%
42
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press End Leak Detection • FIP Union • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†
Size range: 1/2” - 1”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-Free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and
Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PART
1. Body
2. Seat Seal
3. O-ring
4. Washer
5. Lock Nut
6. Handle
7. Stem
8. Ball
9. End Cap
10. O-ring
11. Fitting
12. Washer
13. Nut
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel + Nylon
Steel, Plated
Brass
Chrome Plated Brass - C46500
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000
Forged DZR Copper Alloy - C46500
EPDM
Brass
PCFU-FP-600A-LF
Press x FIP Union
1/2" - 1"
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle Handle Markings
PCFU-FP-600A-LF
Press x FIP Union
1/2" - 1"
In.
1/2
3/4
1
SIZE mm.
12.7
19.05
25.40
A
In.
mm.
6.23
158.20
6.92
175.70
7.17
182.20
In.
3.62
DIMENSIONS—WEIGHTS—QUANTITIES
B C D E mm.
92.00
In.
1.34
mm.
34.00
In.
0.59
mm.
15.00
In.
2.57
4.13
105.00
4.13
105.00
2.06
2.21
52.20
56.20
0.79
0.98
20.00
25.00
2.84
3.11
mm.
65.20
In.
3.93
F mm.
99.70
Lbs.
0.7720
Weight
Kg.
0.3501
72.20
4.38
111.20
1.2040
79.00
4.77
121.20
1.7750
0.5461
0.8051
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
7. Vibration Test
8. Thermal Cycling Test
4. Bending Test
5. Vacuum Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
†Tested to the performance criteria of ASME B16.51
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
43
A H E A D O F T H E F L O W ® www.nibco.com
Revised 6/26/2019
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press Ends Leak Detection • Press x MIP Union • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372 • Conforms to ASME B16.51†
Size range: 1/2” - 1”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and Jaw
Compatibility Matrix list.
Not intended for steam or gas usage.
MATERIAL LIST
PCMU-FP-600A-LF
Press x MIP Union
1/2" - 1"
PART
1. Body
2. Seat Seal (2)
3. O-ring
4. Packing
5. Washer
6. Lock Nut
7. Handle
8. Nut
9. Stem
10. Ball
11. End Cap
12. Union Nut
13. Washer
14. MIP Fitting
15. O-ring
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel ASTM 321
Stainless Steel 304
Steel, Plated
Brass
Brass
Chrome Plated Brass - C46500
Forged DZR Copper Alloy - C46500
Brass
EPDM
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000 (Leak Detect)
C
D
1
B
2
4
3
5 6
A
7
8 9
10 11 12 13
14
15
E
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
SIZE
In.
1/2" mm.
12.70
3/4"
1"
3/4" x 1/2" MIP
19.05
25.40
In.
6.31
6.92
7.13
6.80
A mm.
160.20
175.70
181.20
172.70
F
PCMU-FP-600A-LF
NF99UM7
Handle Markings
In.
3.62
DIMENSIONS—WEIGHTS—QUANTITIES
B C D E mm.
92.00
In.
1.34
mm.
34.00
In.
0.59
mm.
15.00
In.
2.60
F mm.
In.
mm.
Lbs.
66.00
4.00
101.70
0.6720
Weight
Kg.
0.3048
4.13
105.00
4.13
105.00
3.98
101.00
2.06
2.21
2.11
52.20
56.20
53.50
0.79
0.98
0.59
20.00
25.00
15.00
2.81
3.05
3.51
71.50
4.38
111.20
1.0580
77.50
4.73
120.20
1.5790
89.20
4.42
112.20
0.9800
0.4799
0.7162
0.4500
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
4. Bending Test
5. Vacuum Test
6. Hydraulic Shock (Water Hammer) Test
7. Vibration Test
8. Thermal Cycling Test
†Tested to the performance criteria of ASME B16.51
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
44
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press End Leak Detection • Solder Union • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†
Size range: 1/2” - 1”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-Free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and
Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PART
1. Body
2. Seat Seal
3. O-ring
4. Washer
5. Lock Nut
6. Handle
7. Stem
8. Ball
9. End Cap
10. O-ring
11. Fitting
12. Washer
13. Nut
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel + Nylon
Steel, Plated
Brass
Chrome Plated Brass - C46500
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000
Forged DZR Copper Alloy - C46500
EPDM
Brass
PCSU-FP-600A-LF
Press x Solder Union
1/2" - 1"
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
In.
1/2
3/4
1
SIZE mm.
12.7
19.05
25.40
A
In.
mm.
5.72
145.20
6.64
168.70
6.90
175.20
4.13
105.00
4.13
105.00
Handle Markings
2.06
2.21
52.20
56.20
0.79
0.98
20.00
25.00
2.44
2.68
PCSU-FP-600A-LF
Press x Solder Union
1/2" - 1"
In.
3.62
DIMENSIONS—WEIGHTS—QUANTITIES
B C D E mm.
92.00
In.
1.34
mm.
34.00
In.
0.59
mm.
15.00
In.
2.13
mm.
54.10
In.
3.41
F mm.
86.70
Lbs.
0.6130
Weight
Kg.
0.2780
62.10
4.10
104.20
1.0010
68.10
4.50
114.20
1.4880
0.4540
0.6749
†Tested to the performance criteria of ASME B16.51
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
7. Vibration Test
8. Thermal Cycling Test
4. Bending Test
5. Vacuum Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
45
A H E A D O F T H E F L O W ® www.nibco.com
Revised 6/26/2019
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press End Leak Detection • Press x Press Union • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372 • Conforms to ASME B16.51†
Size range: 1/2” - 1”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F Dezincification
Resistant
Lead-free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water •
HVAC (condensors, chilled water, hot water heating) • Isolation and
Throttling (half-open to full-open only) • Connect to Rigid Copper
Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and
Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PART
1. Body
2. Seat Seal (2)
3. O-ring
4. Packing
5. Washer
6. Lock Nut
7. Handle
8. Nut
9. Stem
10. Ball
11. End Cap
12. Union Nut
13. Washer
14. Press Fitting
15. O-ring (2)
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel ASTM 321
Stainless Steel 304
Steel, Plated
Brass
Brass
Chrome Plated Brass - C46500
Forged DZR Copper Alloy - C46500
Brass
EPDM
Forged DZR Copper Alloy - C46500
EPDM - ASTM D2000 (Leak Detect)
C
D
1
PCU-FP-600A-LF
Press x Press Union
1/2" - 1"
B
2
4
3
5
6
A
7 8
9
10 11 12 13
14
15
E
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
F
Handle Markings
PCU-FP-600A-LF
NF99UP6
1/2" - 1 "
In.
1/2"
3/4"
1"
SIZE mm.
12.70
19.05
25.40
In.
6.82
7.23
7.69
A mm.
173.20
183.70
195.20
In.
3.78
DIMENSIONS—WEIGHTS—QUANTITIES
B C D E mm.
96.00
In.
1.83
mm.
46.50
In.
0.59
mm.
15.00
In.
2.78
F mm.
In.
mm.
70.70
4.36
110.70
3.98
101.00
4.37
111.00
2.11
2.58
53.50
65.50
0.79
0.98
20.00
25.00
3.04
3.24
77.20
4.85
123.20
82.20
5.05
128.20
Lbs.
0.77
Weight
Kg.
0.35
1.19
1.77
0.54
0.80
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
4. Bending Test
5. Vacuum Test
6. Hydraulic Shock (Water Hammer) Test
7. Vibration Test
8. Thermal Cycling Test
†Tested to the performance criteria of ASME B16.51
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
46
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 6/26/2019
NIBCO ® Press System Lead-Free Brass Ball Valves
Features: Press Slip • Press Ends Leak Detection • Double Stem Seal • Two-Piece Body • PTFE Seats •
Full Port • Blowout-Proof Stem
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372 • Conforms to ASME B16.51†
Size range: 1/2” - 1”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 225 psi at 250° F
Lead-free markings: White handle and blue hang tag
Applications: Drinking Water • Domestic Hot & Cold Water • HVAC (condensors, chilled water, hot water heating) • Isolation and Throttling (halfopen to full-open only) • Connect to Rigid Copper Tubing Manufactured per
ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
MATERIAL LIST
PART SPECIFICATION
1. Body
2. Seat Seal (2)
3. O-ring
4. Packing
5. Washer
6. Lock Nut
7. Handle
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel ASTM 321
Stainless Steel 304
Steel, Plated
8. Nut
9. Stem
Brass
Brass
10. Ball Chrome Plated Brass - C46500
11. End Cap / Slip Side Forged DZR Copper Alloy - C46500
12. O-ring (2) EPDM - ASTM D2000
C
D
1
12
B
2
PC-FP-600A-S-LF
Press x Press Slip
1/2" - 1"
4
3
5
6
Dezincification
Resistant
A
7
8 9
10 11
E
F
PC-FP-600A-S-LF
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
• Mini Flat
Handle Markings
1/2" - 1" ‡
SIZE
In.
1/2"
3/4"
1"
In.
8.23
9.12
10.13
A mm.
209
231.7
257.2
In.
3.78
3.98
4.37
B mm.
96
101
111
DIMENSIONS—WEIGHTS—QUANTITIES
C D E
In.
1.83
2.11
2.58
mm.
46.5
53.5
65.5
In.
0.63
0.88
1.14
mm.
16.03
22.43
28.96
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
4. Bending Test
5. Vacuum Test
6. Hydraulic Shock (Water Hammer) Test
7. Vibration Test
8. Thermal Cycling Test
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
In.
2.41
2.88
3.43
mm.
61.2
73.2
87.2
In.
5.76
6.74
7.49
F mm.
146.2
171.2
190.2
Lbs.
0.7
1.19
1.82
Weight
Kg.
0.32
0.54
0.83
†Tested to the performance criteria of ASME B16.51
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
LEAD-FREE: Weighted average lead content ≤ 0.25%
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
47
A H E A D O F T H E F L O W ® www.nibco.com
Revised 6/26/2019
NIBCO ® Press System Lead-Free Brass Ball & Check Valves
Features: All-in-one Ball and Inline Check Valve • Press Ends Leak Detection • Double Stem Seal •
Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372 • Conforms to ASME B16.51†
Size range: 1/2” - 11/2”
Pressure rating: 250 psi non-shock cold working pressure
Maximum pressure / temperature: 150 psi at 250° F
Lead-free markings: White handle and blue hang tag
NSF/ANSI 61 & 372
IAPMO/ANSI Z1157
Applications: Drinking Water • Domestic Hot & Cold Water • HVAC (condensors, chilled water, hot water heating) • Isolation and Throttling (half-open to full-open only) • Connect to Rigid Copper Tubing Manufactured per ASTM B88, Condition H (hard drawn)
Reference Press System catalog for updated Approved Tool and Jaw Compatibility Matrix list.
Not intended for steam or gas usage.
PART
1. Body
2. Seat Seal (2)
3. O-ring
4. Packing
5. Washer
6. Lock Nut
7. Handle
8. Nut
9. Stem
10. Ball
11. End Cap
12. Check Valve
13. O-ring (2)
14. Metal Ring (2)
MATERIAL LIST
SPECIFICATION
Forged DZR Copper Alloy - C46500
PTFE
EPDM - ASTM D2000
PTFE
Stainless Steel ASTM 321
Stainless Steel 304
Steel, Plated
Brass
Brass
Chrome Plated Brass - C46500 (1/2"-1")
Stainless Steel 316 (11/4"-11/2")
Forged DZR Copper Alloy - C46500
OV25-HT Cartridge
EPDM - ASTM D2000 (Leak Detect)
Stainless Steel (11/4"-11/2")
PC-FP-485-LF
Dezincification
Resistant
Press x Press
1/2" - 11/2"
(Patent US 10,240,698: sizes 11/4"-11/2")
Options:
• Extended lever
• EPDM Seal for Press Ends
• Wing Handle
• Mini Flat
SIZE
In.
1/2"
3/4"
1"
11/4"
11/2"
A
In.
mm.
5.87
149.00
6.58
167.20
7.36
187.00
8.82
224.00
10.69
271.50
Handle Markings
B
In.
3.78
mm.
96.00
3.98
101.00
4.37
111.00
5.04
128.00
6.22
158.00
DIMENSIONS—WEIGHTS—QUANTITIES
C D E
In.
1.83
2.11
2.58
2.70
3.16
mm.
In.
mm.
46.50
0.631
16.03
53.50
0.883
22.43
65.50
1.140
28.96
68.50
1.386
35.20
80.20
1.636
41.56
In.
1.82
2.39
2.90
mm.
46.20
60.70
73.70
3.62
91.90
4.22
107.20
In.
3.39
4.20
4.71
5.86
7.00
F mm.
86.20
106.70
119.70
148.90
177.70
PC-FP-485-LF
Press x Press
1/2" - 11/2"
Lbs.
0.50
0.88
1.42
2.16
3.12
Weight
Kg.
0.23
0.40
0.65
0.98
1.42
IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:
1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)
2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)
3. Static Torsion Test for Press Connections
4. Bending Test
5. Vacuum Test
6. Hydraulic Shock (Water Hammer) Test
7. Vibration Test
8. Thermal Cycling Test
†Tested to the performance criteria of ASME B16.51
‡ Patent US 10,240,698
9. Alternate Thermal Cycling Test
10. Dynamic Torsion Test for Press Connections
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
LEAD-FREE: Weighted average lead content ≤ 0.25%
48
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Gate Valves
Screw-In Bonnet • Rising Stem • Solid Wedge
200 psi/13.8 bar non-shock cold working pressure
250°F maximum operating temperature
CONFORMS TO MSS SP-80
PART
1. Handwheel Nut
2. Identification Plate
3. Handwheel
4. Stem
5. Pack Nut
6. Pack Gland
7. Packing
8. Bonnet
9. Body Assembly
10. Wedge
11. Female Adapter (2)
12. O-Ring (2)
MATERIAL LIST
SPECIFICATION
300 Series Stainless Steel
Aluminum
Malleable Iron ASTM A 47
Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100
Brass ASTM B 16 Alloy C36000
Brass ASTM B 16 Alloy C36000
Aramid Fibers with Graphite
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 61 Alloy C92200
EPDM
DIMENSIONS—WEIGHTS
Dimensions
Size A
B C
In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
¹⁄₂ † 15 1.97 50 4.81 122 .50 13 .84 .38
³⁄₄ 20 2.62 67 5.81 148 .75 19 1.30 .59
25 3.07 78 7.09 180 1.00 25 2.09 .95
1 ¹⁄₄ 32 3.36 85 8.13 206 1.25 32 2.95 1.34
1 ¹⁄₂ 40 3.70 94 9.81 249 1.50 38 4.16 1.89
50 4.28 109 11.56 294 2.00 51 6.79 3.09
† No packing gland, packing only in this size.
NIBCO Press System gate valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
PF-111
Press x Press
Female End
PF-111
P x P
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
49
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO
®
Press System Lead-Free
Bronze Gate Valves
Silicon Performance Bronze ® Alloy • Screw-In Bonnet • Rising Stem •
Conforms to MSS SP-139 • Solid Wedge • Press Ends Leak Detection
Pressure rating: 250 † psi non-shock cold working pressure
Maximum pressure / temperature: 180 psi at 200° F
Dezincification
Resistant
Lead-Free markings:
Double oval in body casting, white handle and blue hang tag
NSF/ANSI-61-8 Commercial Hot 180°F
(includes Annex F and G) • NSF/ANSI-372
PART
1. Handwheel Nut
2. Handwheel
3 . Stem
4 . Packing Gland
5 . Stem Packing
6 . Packing Nut
7 . Bonnet
8 . Body
9 . Wedge
10 . Identification Plate
11 . Boss seal o-ring (2)
12 . Press End Adapter (2)
13 . Leak Detect O-Ring (2)
MATERIAL LIST
SPECIFICATION
300 Series Stainless Steel
Malleable Iron ASTM A47, 35018
Silicon Bronze ASTM B371 Alloy C69430
ASTM B16 C36000
Aramid Fibers with Graphite
ASTM B16 C36000
Silicon Bronze ASTM B584 Alloy C87850
Silicon Bronze ASTM B584 Alloy C87850
Silicon Bronze ASTM B584 Alloy C87850
Aluminum
EPDM
Wrot Copper ASTM B75 Alloy C12200
EPDM
PC-111-LF
Press x Press
Female End
SIZE A B
DIMENSIONS—WEIGHTS—QUANTITIES
C D E F G H Weight
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In. mm.
Lbs.
Kg.
1/2 † 15 3.68 93.47 4.85 123 2.28
57.9
3.92 100 4.82 122 0.5 13 0.7 17.78 2.44
62 0.96
0.43
3/4 20 4.28 108.7 5.89 150 2.36
60 4.93 125 5.74 146 0.75 19 0.96
24 2.44
62 1.38
0.62
1 25 4.62 117.3 7.21 183 2.85
72.4
5.95 151 6.93 176 1.00 25 0.88 22.35 3.19
81 2.18
0.99
1-1/4 32 5.1 129.5 8.20 208 3.08
78.23 6.69 170 7.84 199 1.25 32 1.01 25.65 3.19
81 3.15
1.43
1-1/2 40 6.18 157 9.40 239 3.41
86.6
7.51 191 8.94 227 1.50 38 1.38
35 4.42
112.3
4.5
2.04
2 50 6.44 163.6 11.54
293 3.42
86.9
9.65 245 10.84 275 2.00 51 1.51 38.3
4.42
112.3
6.7
3.04
2-1/2 65 7.56 192 14.4
366 4.62
117.3 11.86 301 13.52 343 2.50 64 1.47 37.3
4.42
112.3
11.9
5.4
3 80 8.49 215.6 16.6
422 5.17
131.3 13.89 353 15.65 398 3.00 76 1.66 42.2
5.28
134.1
18.6
8.44
† 200 psi for 2 1/2” and 3”
‡ No packing gland, packing only in this size.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
Master
Ctn Qty.
50
25
20
10
10
4
4
4
Visit our website for the most current information.
50
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Gate Valves
Screw-In Bonnet • Non-Rising Stem • Solid Wedge
200 psi/13.8 bar non-shock cold working pressure
250°F maximum operating temperature
CONFORMS TO MSS SP-80
PART
1. Handwheel Nut
2. Identification Plate
3. Handwheel
4. Stem
5. Pack Nut
6. Pack Gland
7. Packing
8. Stuffing Box
9. Bonnet
10. Body Assembly
11. Wedge
12. Female Adapter (2)
13. O-Ring (2)
MATERIAL LIST
SPECIFICATION
300 Series Stainless Steel
Aluminum
Malleable Iron ASTM A 47
Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100
Brass ASTM B 16 Alloy C36000
Brass ASTM B 16 Alloy C36000
Aramid Fibers with Graphite
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 61 Alloy C92200
EPDM
PF-113
Press x Press
Female End www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
DIMENSIONS—WEIGHTS
Dimensions
Size A
B C
In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
¹⁄₂ † 15 1.97 50 3.63 92 .50 13 .78 .36
³⁄₄ 20 2.62 67 3.91 99 .75 19 1.21 .55
25 3.07 78 4.69 119 1.00 25 1.92 .88
1 ¹⁄₄ 32 3.36 85 5.22 133 1.25 32 2.69 1.22
1 ¹⁄₂ 40 3.70 94 6.25 159 1.50 38 3.91 1.78
50 4.28 109 7.06 179 2.00 51 6.21 2.83
† No packing gland, packing only in this size.
NIBCO Press System gate valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female pressto-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
PF-113
P x P
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
51
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO
®
Press System Lead-Free Bronze Gate Valves
Silicon Performance Bronze ® Alloy • Screw-In Bonnet • Non-Rising Stem •
Conforms to MSS SP-139 • Solid Wedge • Press Ends Leak Detection
Pressure rating: 250 † psi non-shock cold working pressure
Maximum pressure / temperature: 180 psi at 200° F
Dezincification
Resistant
Lead-Free markings:
Double oval in body casting, white handle and blue hang tag
NSF/ANSI-61-8 COMMERCIAL HOT 180°F (INCLUDES
ANNEX F AND G) • NSF/ANSI-372
PART
1. Handwheel Nut
2 . Handwheel
3 . Stem
4 . Packing Gland
5 . Stem Packing
6 . Packing Nut
7 . Stuffing Box
8 . Bonnet
9 . Body
10 . Wedge
11. Identification Plate
12 . Boss seal o-ring (2)
13 . Press End Adapter (2)
14 . Leak Detect O-Ring (2)
MATERIAL LIST
SPECIFICATION
300 Series Stainless Steel
Malleable Iron ASTM A47, 35018
Silicon Bronze ASTM B371 Alloy C69430
ASTM B16 C36000
Aramid Fibers with Graphite
ASTM B16 C36000
Silicon Bronze ASTM B584 Alloy C87850
Silicon Bronze ASTM B584 Alloy C87850
Silicon Bronze ASTM B584 Alloy C87850
Silicon Bronze ASTM B584 Alloy C87850
Aluminum
EPDM
Wrot Copper ASTM B75 Alloy C12200
EPDM
PC-113-LF
Press x Press
Female End
SIZE A B
In.
mm.
In.
mm.
In.
mm.
In.
1/2† 15
3.68 93.47 3.66
93 2.28
3/4 20
4.24 107.7 3.94
100 2.36
1 25 4.62 117.3 4.62
117.3
2.85
1-1/4 32 5.1
129.5 5.19
132 3.08
1-1/2 40 6.18
157 6.3
160 3.41
2 50 6.44 163.6 7.09
180 3.42
DIMENSIONS—WEIGHTS—QUANTITIES
C D E F G H mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
Lbs.
57.9
3.34 84.84 4.24 107.7
0.5
13 0.7
17.78 2.44
62 0.91
Kg.
0.41
59.9
3.85
97.8
4.64
118 0.75
19 0.96
24 2.44
62
72.4
4.69
119 5.52
140 1.00
25 0.88 22.35 3.19
81
1.28
0.58
2.09
0.95
78.2
5.26 133.6 6.25
159 1.25
32 1.01 25.65 3.19
81 3.03
1.37
86.6
6.07 154.2
7.5
191 1.50
38 1.38
35 4.42 112.3
4.18
1.9
86.9
7.33 186.2 8.59
218 2.00
51 1.51
38.3
4.42 112.3
6.1
Weight
2.77
2-1/2 65 7.56
192 8.88
226 4.62
117.3
9.28 235.7 10.69
272 2.50
64 1.47
37.3
4.42 112.3
11.2
5.08
3 80 8.49 215.6 10.24
2.6
5.17
131.3
10.71 272 12.5
318 3.00
76 1.66
42.2
5.28 134.1 17.37
7.89
† 200 psi for 2 1/2” and 3”
‡ No packing gland, packing only in this size.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
Master
Ctn Qty.
30
25
20
10
10
4
4
4
Visit our website for the most current information.
52
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Globe Valves
Screw-In Bonnet • Integral Seat • Renewable Seat and Disc
200 psi/13.8 bar non-shock cold working pressure
250°F maximum operating temperature
CONFORMS TO MSS SP-80
PART
1. Handwheel Nut
2. Identification Plate
3. Handwheel
4. Stem
5. Pack Gland
6. Pack Nut
7. Packing
8. Bonnet
9. Disc Holder Nut
10. Disc Holder
11. Disc
12. Disc Washer
13. Disc Nut
14. Body Assembly
15. Female Adapter (2)
16. O-Ring (2)
MATERIAL LIST
SPECIFICATION
300 Series Stainless Steel
Aluminum
Malleable Iron ASTM A 47
Silicon Bronze ASTM B 371 Alloy C69430
Brass ASTM B 16 Alloy C36000
Brass ASTM B 16 Alloy C36000
Aramid Fibers with Graphite
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
PTFE
304 Stainless Steel
Bronze ASTM B 98 Alloy C65100
Bronze ASTM B62 Alloy C83600
Bronze ASTM B 61 Alloy C92200
EPDM
PF-211-Y
Press x Press
Female End www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
DIMENSIONS—WEIGHTS
Dimensions
Size A B C Weight
In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
*
¹⁄₂
†
15 2.91 74 3.38 86 .50 13 1.07 .48
³⁄₄ 20 3.99 101 4.88 124 .75 19 2.04 .93
1 25 4.88 124 5.69 145 1.00 25 3.13 1.42
1 ¹⁄₄ 32 5.23 133 6.13 156 1.25 32 4.00 1.82
1 ¹⁄₂ 40 6.01 153 7.38 187 1.50 38 6.44 2.93
2 50 7.41 188 7.94 202 2.00 51 10.16 4.62
† No packing gland, packing only in this size.
* Stem and disc (or disc holder) are integral.
NIBCO Press System globe valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
PF-211-Y
P x P
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
53
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Angle Valves
Screw-In Bonnet • Integral Seat • Renewable Seat and Disc
200 psi/13.8 bar non-shock cold working pressure
250°F maximum operating temperature
CONFORMS TO MSS SP-80
PART
1. Handwheel Nut
2. Identification Plate
3. Handwheel
4. Stem
5. Pack Gland
6. Pack Nut
7. Packing
8. Bonnet
9. Disc Holder Nut
10. Disc Holder
11. Disc
12. Disc Washer
13. Disc Nut
14. Body
15. Female Adapter (2)
16. O-Ring (2)
MATERIAL LIST
SPECIFICATION
300 Series Stainless Steel
Aluminum
Malleable Iron ASTM A 47
Silicon Bronze ASTM B 371 Alloy C69430
Brass ASTM B 16 Alloy C36000
Brass ASTM B 16 Alloy C36000
Aramid Fibers with Graphite
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
PTFE
304 Stainless Steel
Silicon Bronze ASTM B 96 Alloy C65100
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 61 Alloy C92200
EPDM www.nibco.com
Revised 7/25/2018
PF-311-Y
Press x Press
Female End
Dezincification
Resistant
DIMENSIONS—WEIGHTS
Dimensions
Size B
H J
In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
* ¹⁄₂
† 15 3.50 89 1.49 38 1.49 38 1.07 .48
³⁄₄ 20 4.94 126 2.00 51 2.00 51 1.94 .88
25 5.75 146 2.48 63 2.48 63 3.12 1.42
1 ¹⁄₄ 32 6.13 156 2.59 66 2.59 66 4.21 1.92
1 ¹⁄₂ 40 7.25 179 2.98 76 2.98 76 5.44 2.47
50 8.13 206 3.64 93 3.64 93 9.98 4.54
† No packing gland, packing only in this size.
* Stem and disc or disc holder are integral.
NIBCO Press System angle valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
PF-311-Y
P x P
Visit our website for the most current information.
54
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
Lead-Free Bronze Check Valves
Silicon Performance Bronze ® Alloy • Horizontal Swing • Regrinding Type • Y-Pattern •
Renewable Seat and Disc • Conforms to MSS SP-139 • Press Ends
Pressure rating: 200 psi non-shock cold working pressure
Maximum pressure / temperature: 100 psi at 250° F
Lead-Free marking:
Double oval in body casting
NSF/ANSI-61-8 COMMERCIAL HOT 180°F (INCLUDES
ANNEX F AND G) • NSF/ANSI-372
MATERIAL LIST
PART SPECIFICATION
1. Bonnet
2. Body
3. Hinge Pin
Silicon Bronze ASTM B584 Alloy C87850
Silicon Bronze ASTM B584 Alloy C87850
ASTM A276 Alloy S31600 or ASTM A276 Alloy S30400
4. Disc Hanger
5. Stainless Steel Nut (2)
Silicon Bronze ASTM B584 Alloy C87850
ASTM F594 Alloy S31600 or ASTM F594 Alloy S30400
6. Disc Holder
Silicon Bronze ASTM B371 Alloy C69300
7. Seat Disc PTFE
*9. Disc Washer
10. O-Ring
304 Stainless Steel
EPDM
11. Press End Adapter ASTM B75 Alloy C12200
12. Crimp Evident Seal O-Ring 304SS or 316SS
*Sizes ³⁄₄ ", 1", 1 ¹⁄₄ ", 1 ¹⁄₂ " and 2" only
DIMENSIONS—WEIGHTS
In.
SIZE mm.
¹⁄₂
A
In.
(Lay Length)
15 2.78
mm.
71
³⁄₄ 20 3.25
83
1 25 3.97
101
1 ¹⁄₄ 32 4.64
118
1 ¹⁄₂ 40 5.00
127
2 50 5.85
149
Dimensions
B
(Height)
In.
Master Weight mm.
Ctn Qty Lbs.
Kg.
1.66
42 40 0.72
0.33
1.90
2.27
2.67
3.09
3.84
48
58
68
79
98
40
25
20
16
4
1.13
1.80
2.42
3.75
5.51
0.51
0.82
1.10
1.70
2.50
NIBCO ® check valves may be installed in both horizontal and vertical lines with upward flow or in any intermediate position. They will operate satisfactorily in a declining plane (no more than 15º). Install check valves as far from pump discharge or line direction change as possible and at a minimum length of 5 times the pipe diameter.
Do not use for reciprocating air compressor service.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
PC-413-Y-LF
Press Ends
PC-413-Y-LF
Press x Press
LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
55
A H E A D O F T H E F L O W ®
Lead-Free Bronze Ring Check ® Valves
Features: Silicon Performance Bronze® Alloy • Inline Lift Type • Resilient Discs •
Spring Actuated
Approvals: Conforms to MSS SP-139 • NSF/ANSI-61-8 Commercial Hot 180°F and NSF/ANSI-372
Size range: 1/2" - 2"
Pressure rating: 250 PSI non-shock cold working pressure
Maximum pressure / temperature: 100 PSI at 300° F
Lead-free marking: Double oval in body casting www.nibco.com
Revised 1/7/2021
Dezincification
Resistant
MATERIAL LIST
PART SPECIFICATION
1. Spring
2. Seat Screw
3. Stem
4. Disk Holder
5. Disk
Stainless Steel S31600
Stainless Steel 18-8
Stainless Steel ASTM A582 Alloy S30300
Stainless Steel 18-8
(Y) PTFE (W) BUNA-N
6. Press End Adapter ASTM B75 Alloy C12200
7. Crimp Evident Seal O-Ring EPDM
8. O-Ring
9. Body
10. Body End
EPDM
Silicon Bronze ASTM B584 Alloy C87600
Silicon Bronze ASTM B584 Alloy C87600
SIZE
DIMENSIONS—WEIGHTS—QUANTITIES
A B C PC-480-Y-LF Master
In.
mm.
In.
mm.
In.
mm.
In.
mm.
Lbs.
Kg.
Ctn Qty.
1/2 15 3.647
93 1.570
40 2.251
57 0.48
0.22
100
3/4 20 4.438
113 1.860
47 2.518
64 0.69
0.31
1 25 4.640
118 2.360
60 2.870
73 1.07
0.48
11/4 32 5.117
130 2.680
68 3.097
79 1.53
0.69
11/2 40 6.314
160 3.060
78 3.544
90 2.12
0.96
2 50 7.084
180 3.720
94 4.064
103 3.40
1.54
100
50
30
30
10
SIZE A B C PC-480-W-LF Master
In.
mm.
In.
mm.
In.
mm.
In.
mm.
Lbs.
Kg.
Ctn Qty.
1/2 15 3.647
93 1.570
40 2.251
57 0.48
0.22
100
3/4 20 4.438
113 1.860
47 2.518
64 0.69
0.31
100
1 25 4.640
118 2.360
60 2.870
73 1.06
0.48
11/4 32 5.117
130 2.680
68 3.097
79 1.52
0.69
11/2 40 6.314
160 3.060
78 3.544
90 2.11
0.96
2 50 7.084
180 3.720
94 4.064
103 3.38
1.53
50
30
30
10
Install 5 Pipe diameters minimum downstream from pump discharge or changes in direction to avoid flow turbulence. Flow straighteners may be required in extreme cases.
NIBCO In-line check valves may be installed in both horizontal and vertical lines, or in any intermediate position.
Do not use for reciprocating air compressor service.
PC-480-Y-LF
PC-480-W-LF
Press Ends
PC-480-Y-LF
PC-480-W-LF
Press x Press
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
56
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Check Valves
Horizontal Swing • Regrinding Type • Y-Pattern • Renewable Seat and Disc
200 psi/13.8 bar non-shock cold working pressure
250°F maximum operating temperature
PART
1. Bonnet
2. Body
3. Hinge Pin
4. Disc Hanger
5. Hanger Nut
6. Disc Holder
7. Seat Disc
8. Seat Disc Nut
9. Hinge Pin Plug
*10. Seat Disc Washer
11. Female Adapter (2)
12. O-Ring (2)
CONFORMS TO MSS SP-80
MATERIAL LIST
SPECIFICATION
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 62 Alloy C83600
Bronze ASTM B 140 Alloy C31400
Bronze ASTM B 62 Alloy C83600 or 304 SS
1/2" and 3/4" sizes only
Brass ASTM B 16 Alloy C36000
Bronze ASTM B 62 Alloy C83600
PTFE
Brass ASTM B 16 Alloy C36000
Bronze ASTM B 140 Alloy C32000 (not shown)
ASTM B 98 Alloy C65500 or ASTM B 103
Bronze ASTM B 61 Alloy C92200
EPDM
* Sizes 3/4" thru 2" only
PF-413-Y
Press x Press
Female End www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
DIMENSIONS—WEIGHTS
Dimensions
Size A B Weight
In. mm. In. mm. In. mm. Lbs. Kg.
¹⁄₂ 15 2.72 69 1.54 39 .58 .26
1
³⁄₄ 20 3.62 92 1.83 46 .96 .44
25 4.32 110 2.21 56 1.51 .69
1 ¹⁄₄ 32 4.92 125 2.69 68 2.29 1.04
1 ¹⁄₂ 40 5.58 142 2.94 75 3.30 1.50
2 50 6.72 171 3.61 92 5.45 2.48
NIBCO Press System check valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female pressto-connect ends are new technology not yet covered in the current edition of this specification.
WARNING — Do not use for reciprocating air compressor service
NIBCO check valves may be installed in both horizontal and vertical lines with upward flow or in any intermediate position. They will operate satisfactorily in a declining plane (no more than 15º).
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
PF-413-Y
P x P
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
57
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Bronze In-line Lift Check Valves
In-Line Lift Type • Resilient Discs • Spring Actuated
200 psi/17.2 bar non-shock cold working pressure
250°F maximum operating temperature
Dezincification
Resistant
PART
1. Body
2. Stem
3. Spring
4. Disc Holder
5. Disc
6. Seat Screw
7. Body End
8. Adapter (2)
9. O-Ring (2)
MATERIAL LIST
SPECIFICATION
Bronze ASTM B584 Alloy C84400
Stainless Steel ASTM A582
Alloy C30300
316 Stainless Steel
Stainless Steel Type 301
PTFE
Stainless Steel ASTM A276
Alloy S43000
Bronze ASTM B584 Alloy C84400
Bronze ASTM B61 Alloy C92200
EPDM
DIMENSIONS—WEIGHTS
Dimensions
Size A B C Weight
In. mm. In. mm. In. mm. In. mm Lbs. Kg.
¹⁄₂ 15 2.41 61 1.38 35 .50 13 0.52 0.24
³⁄₄ 20 3.05 77 1.63 41 .75 19 0.75 0.34
1 25 3.56 90 2.00 51 1.00 25 1.18 0.54
1 ¹⁄₄ 32 3.86 98 2.38 60 1.25 32 1.72 0.78
1 ¹⁄₂ 40 4.45 113 2.75 70 1.50 38 2.49 1.13
2 50 5.28 134 3.38 86 2.00 51 3.96 1.80
NIBCO Press System check valves may be installed in both horizontal and vertical lines with upward flow or in any intermediate position.
WARNING - Do Not Use for reciprocating air compressor service.
NOTE: 0.5 psi pressure required to open spring.
NOTE: Check valves are down-rated from 250 psi CWP to 200 psi CWP to match the Press System.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
PF-480-Y
Press x Press
Female End
PF-480-Y (PTFE Disc)
P x P
Visit our website for the most current information.
58
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ® Press System Butterfly Valves
Ductile Iron Body • Extended Neck • Geometric Drive
Molded-In Seat Liner • Lug Style with Press x Press Female Ends
200 psi/13.8 bar non-shock cold working pressure
250°F maximum operating temperature
CONFORMS TO MSS-SP67 • MSS-SP25 • API-609
•
NSF/ANSI-8 COMMERCIAL HOT 180°F (INCLUDES
ANNEX F AND G) AND NSF/ANSI-372
PART
MATERIAL LIST
SPECIFICATION
1. Stem
2. Collar Bushing
3. Stem Seal
4. Body Seal
5. Nameplate
6. Upper Bushing
7. Liner
8. Disc
Stainless Steel ASTM A 582 Type 416
Brass ASTM B 124
EPDM Rubber
EPDM Rubber
Aluminum
Wrot Copper ASTM B 75 Alloy C12200
EPDM Rubber
Alum. Brz. ASTM B 148 Alloy 954/955
9. Lower Bushing
10. Body Lug
11. Flange Body (2)
12. Flange Gasket (2)
Wrot Copper ASTM B 75 Alloy C12200
Ductile Iron ASTM A 536
Carbon Steel
EPDM
13. Flange Press Ends (2) Wrot Copper ASTM B 75 Alloy C12200
14. O-Ring (2) EPDM
15. Cap Screws Carbon Steel
Available with lock lever handle or gear operator.
www.nibco.com
Revised 7/25/2018
PFD-2000
Lug Style
EPDM Liner and Aluminum
Bronze Disc
Press x Press
Female End
DIMENSIONS — WEIGHTS
Size
In. mm. A B C D E F Flat H I
2
1 ⁄
2
65 2.90 4.69 1.25 5.88 3.27 .38 .370 1.812 1.938
3 80 3.15 5.12 1.25 6.12 3.40 .38 .370 1.812 1.938
4 100 4.09 6.12 1.25 6.88 4.00 .38 .403 2.062 2.188
Size J N O P R S Lug
In. mm. Square Dia. B.C. Dia. Dia. No. Length
Weight
Lbs. Kg.
2 1 ⁄
2
65 3.25 .562 3.25 .437 .500 3.13 Refer to
3
4
80 3.25 .562 3.25 .437 .500 3.44
100 3.25 .625 3.25 .437 .562 4.00
page 65 for bolt lengths
24.00 10.88
26.00 11.78
38.00 17.23
NIBCO Press System butterfly valves are designed to meet MSS SP-67 with the exception of the end connection. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
NOT RECOMMENDED
FOR STEAM SERVICE
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
59
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Ball Valves
Two-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem
600 psi/41.4 bar non-shock cold working pressure
250°F maximum operating temperature
PART
1. Handle Nut
2. Handle Assembly
3. Pack Gland
4. Packing
5. Stem
6. Thrust Washer
7. Ball
8. Seat Ring (2)
9. Body
10. Body End Piece
11. Stub Out (2)
CONFORMS TO MSS SP-110
MATERIAL LIST
SPECIFICATION
Zinc Plated Steel
Zinc Plated Steel with Plastisol Cover
Brass ASTM B 16 Alloy C36000
PTFE
Silicon Bronze ASTM B 371 Alloy C69430
RPTFE
Brass ASTM B 16 Alloy C36000 or ASTM B 124
Alloy C37700 (Chrome/Nickle Plated)
RPTFE
Bronze ASTM B 584 Alloy C84400
Bronze ASTM B 584 Alloy C84400
Type “L” Copper Tube
PS-585-70
Press x Press
Male End www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
DIMENSIONS—WEIGHTS
Dimensions
Size A B C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
¹⁄₂ 15 6.56 184 .50 13 .73 .99
³⁄₄ 20 7.25 184 2.25 57 8.25 210 .75 19 1.50 .68
1
1 ¹⁄₄ 32 9.06 230 3.00 76 9.19 233 1.25 32 3.64 1.65
1 ¹⁄₂ 40 9.99 254 3.16 80 11.69 297 1.50 38 5.73 2.60
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi
CWP to 200 psi CWP to match the NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
PS-585-70
P x P
Visit our website for the most current information.
60
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ® Press System Bronze Ball Valves
Two-Piece Body • Full Port • Stainless Trim • Blowout-Proof Stem • Vented Ball
600 psi/41.4 bar non-shock cold working pressure
250°F maximum operating temperature
Nominal sizes 1/2" through 1" are UL certified to NSF/ANSI 61
PART
1. Handle Nut
2. Handle Assembly
3. Pack Gland
4. Packing
5. Stem
6. Thrust Washer
7. Ball
8. Seat Ring (2)
9. Body
10. Body End Piece
11. Stub Out (2)
CONFORMS TO MSS SP-110
MATERIAL LIST
SPECIFICATION
Zinc Plated Steel
Zinc Plated Steel with Plastisol Cover
Brass ASTM B 16 Alloy C36000
PTFE
ASTM A 276 Alloy S31600 Stainless Steel
RPTFE
ASTM A 276 Alloy S31600 Stainless Steel
RPTFE
Bronze ASTM B 584 Alloy C84400
Bronze ASTM B 584 Alloy C84400
Type “L” Copper Tube
PS-585-70-66
Press x Press
Male End www.nibco.com
Revised 7/25/2018
Dezincification
Resistant
DIMENSIONS—WEIGHTS
Dimensions
Size A B C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
¹⁄₂ 15 6.56 184 .50 13 .73 .33
³⁄₄ 20 7.25 184 2.25 57 8.25 210 .75 19 1.50 .68
1
1 ¹⁄₄ 32 9.06 230 3.00 76 9.19 233 1.25 32 3.86 1.75
1 ¹⁄₂ 40 9.99 254 3.16 80 11.69 297 1.50 38 5.79 2.63
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi
CWP to 200 psi CWP to match the NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
PS-585-70-66
P x P
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
61
A H E A D O F T H E F L O W ® www.nibco.com
Revised 7/25/2018
NIBCO ® Press System Bronze Ball Valves
Two-Piece Body • Full Port • Bronze Trim • ³⁄₄ " Hose Connection with Cap and Chain •
Blowout-Proof Stem
600 psi/41.4 bar non-shock cold working pressure
250°F maximum operating temperature
PART
1. Handle Nut
2. Handle
3. Pack Gland
4. Packing
5. Thrust Washer
6. Stem
7. Ball
8. Seat Rings
9. Body Assembly
10. Hose Body End
11. Cap
12. Gasket
13. Chain
14. Stub Out
CONFORMS TO MSS SP-110
MATERIAL LIST
SPECIFICATION
Zinc Plated Steel
Zinc Plated Steel
Brass ASTM B 16 Alloy C36000
PTFE
RPTFE
Silicon Bronze ASTM B 371 Alloy C69430
Brass ASTM B 16 Alloy C36000 or ASTM B 124
Alloy C37700 (Chrome/Nickle Plated)
Reinforced PTFE
Bronze ASTM B 584 Alloy C84400
Brass ASTM B 124 Alloy C37700
Die Cast Brass
Rubber
Brass
Type “L” Copper Tube
Cap is for hose end thread protection only. Not to be used for pressure containing purposes.
PS-585-70-HC
Press Male x Hose End
DIMENSIONS—WEIGHTS
Dimensions
Size A B C Weight
In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
¹⁄₂ 15 4.90 124 1.88 48 7.19 183 .81 .37
³⁄₄
20 5.47 139 2.25 57 8.25 210 1.54 .70
NIBCO Press System ball valves are designed to meet MSS
SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 200 psi CWP to match the
NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
PS-585-70-HC
Press x Hose
Visit our website for the most current information.
62
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
Class 125 Bronze Y-Strainers
Screw-In Cap • Tapped Cap with Blow-Off Plug or Solid Cap •
20 Mesh SS Screen or SS Perforated Screen •Press Ends Leak Detection
200 psi/13.8 bar non-shock cold working pressure
250° F maximum operating temperature
MATERIAL LIST
PART
Body
3. Gasket
4. Screen
SPECIFICATION
Bronze ASTM B584 Alloy C84400
Bronze ASTM B62 Alloy C83600
PTFE
ASTM E2016 20 Mesh - 304 Stainless Steel or
ASTM E674 Perforated - 304 Stainless Steel
Brass ASTM B16 Alloy C36000 or
Bronze ASTM B584 Alloy C84400
6. Female Adapter (2) Bronze ASTM B75 ALLOY C12200
7. O-Ring (2) EPDM - Leak Detection
END CONNECTION SCREEN CAP
PF- Female Press 221 - 20 Mesh (STD.) A - Tapped Cap w/Plug (STD.)
PF - Female Press 222 - Perforated B - Solid Cap
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
¹⁄₂ 15 3.08 78 1.80 46 1/4 NPT 0.66 0.30
³⁄₄ 20 4.13 105 2.15 55 3/8 NPT 1.21 0.55
1 25 4.84 123 2.81 71 3/8 NPT 1.88 0.86
1 ¹⁄₄ 32 5.64 143 3.26 83 3/4 NPT 3.10 1.41
1 ¹⁄₂ 40 6.23 158 3.64 93 3/4 NPT 4.64 2.10
2 50 7.75 197 5.02 128 1 NPT 7.48 3.39
www.nibco.com
Revised 1/15/2021
PF-221/222-A
Press x Press
Female End
PF-221/222-A
P x P
PF-221/222-B
Press x Press
Female End
PF-221/222-B
P x P
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
63
A H E A D O F T H E F L O W ® www.nibco.com
Revised 11/9/2017
NIBCO ® Press System Ball Valve Handle Options
A wide variety of handles are available to fulfill safety and operation requirements in various processing and manufacturing industries. The lever handle with plastic cover is standard. Other handle options are shown. Stainless steel lever handles are available, as an option, also with plastic covers. If an optional handle is desired, please indicate which one when ordering.
Many of these options are field assembly only.
CS Extended Lever Handle with Memory Stop
Allows for 2" of Insulation
NIB-SEAL ® Handle
Allows for 2" of Insulation
CS Locking Lever Handle CS Round Handle NIB-SEAL ® Locking Extended Handle
SS Standard Lever Handle
CS Extended Round Handle
Allows for 2" of Insulation Vertical Chain Lever
SS Locking Lever Handle CS Wing Handle Horizontal Chain Lever
CS Extended Lever Handle
Allows for 2" of Insulation Seat and Seal Kit Memory Stop Kit
Visit our website for the most current information.
64
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ®
NIB-SEAL
®
Press System Bronze Ball Valves
Technical Data
www.nibco.com
Revised 11/7/2017
NIBCO bronze ball valves installed with NIB-SEAL insulated handles are the only approach that keeps your insulated piping system completely intact.
The revolutionary NIB-SEAL bronze ball valve stops condensate cold. Its unique thermal barrier design keeps moisture from infiltrating your insulated system while preventing thermal energy loss through exposed metal handles.
Designed for new installations or retrofitting existing systems, NIB-SEAL bronze ball valves offer a wide range of advantages for typical commercial HVAC systems as well as industrial applications where insulated piping is desirable.
• Protective sleeve provides a stationary surface to affix the insulation, allowing operation and maintenance of the valve without destroying the integrity of the insulated system.
• High-strength cylindrical handle design features easy access to standard adjustable memory stop for system
balancing. The valve packing is also readily accessible for routine maintenance.
• Cap and insulating plug provide a vapor seal to prevent exchange of air to maximize the efficiency of your insulated piping system.
• Position indicators allow at-a-glance determination of whether valve is in open or closed position.
• Pre-formed hole allows for convenient tagging.
Temperature range: 15° F to 250° F
Cap keeps moisture-laden air out to reduce chance of condensate formation
Insulation plug provides vapor seal, keeping air from infiltrating the insulated system
Handle nut
Indicator gives at-a-glance valve position
Memory stop plate and screws for system balancing
Pre-formed hole for identification tag
Extension handle of durable non-thermal conductive material prevents formation of condensation
Protective sleeve allows operation of valve handle and maintenance of valve packing while maintaining integrity of piping insulation
NIBCO Press System bronze ball valve is an integral part of the NIB-SEAL valve system
US PATENT 5,236,006
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
65
A H E A D O F T H E F L O W ®
NIB-SEAL ® Locking Handle
The patented technology of the 3-in-1 NIB-SEAL locking handle solves three problems at once: it extends, it insulates, and it locks . The innovative locking handle design extends valve actuation to provide ample room for insulating around piping systems, and its unique thermal barrier system prevents heat transfer and condensate development. The NIB-SEAL locking handle also allows the valve to be locked in the full open or closed position to prevent incidental actuation.
Designed for new installations, the NIB-SEAL locking handle is engineered to work with NIBCO® bronze ball valves.**
Applications: For piping systems requiring up to 2” of insulation, specify a non-conductive
CPVC extended-locking handle bronze ball valve tested to UL 2043, and UL listed for installation in air handling spaces. The assembly offers a vapor seal, position indicators, locking device, and actuation without disturbing the insulation. Designed for new installations, the NIB-SEAL locking handle installed on bronze ball valves offers a wide range of advantages for typical commercial
HVAC systems as well as industrial applications where insulated piping with a locking device is desirable. Specify NIB-SEAL insulated locking handle.
Approvals: UL 2043
Safety Lock Compatibility: Cable lock as small as 1/8 " diameter to padlock as big as 0.33” diameter shackle.
Temperature Range: 15° F to 250° F
Not intended for steam applications in excess of 15 psi.
www.nibco.com
U.S. PATENT 9,810,344
LOCKING DEVICE works with padlock* or cable lock*
CAP keeps moisture-laden air out to reduce chance of condensate formation
INSULATION PLUG provides vapor seal, reducing air infiltrating the system
LOCKING MECHANISM
EXTENSION HANDLE of durable non-thermal conductive CPVC prevents formation of condensation
PREFORMED HOLE for identification tag
PROTECTIVE SLEEVE allows operation of valve handle and maintenance of valve packing while maintaining integrity of piping insulation
NIBCO BALL VALVE
Dimensions
Sizes
1”
1 1/4 ”
1 1/2 ”
2”
1/4 ”
3/8 ”
1/2 ”
3/4 ”
In.
2.19
3.38
3.38
3.38
2.19
2.19
2.19
2.19
A mm.
55.58
55.58
55.58
55.58
55.58
85.73
85.73
85.73
Series 585
B
In.
4.25
6.50
6.50
6.50
4.25
4.25
4.25
4.25
mm.
107.95
107.95
107.95
107.95
107.95
165.10
165.10
165.10
In.
5.88
6.84
7.06
7.30
5.30
5.30
5.42
5.69
C mm.
134.59
134.58
137.56
144.50
149.40
173.67
179.33
185.44
Factory installed only.
Order appropriate factory installed NIBCO valve figure number with suffix “LX“. Example: T-585-70-LX, ½"
NIB-SEAL on solder/sweat ball valves are shipped unassembled.
* Padlock and cable lock not included
** Valve type showing above is just for handle representation
Visit our website for the most current information.
66
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 8/7/2012
Butterfly Valve Options and Accessories
Lever-Lock Operator (Standard)
PFD2000
Position-Lock Operator (Optional)
PFD2000
The lever-lock handle and throttling plate provide throttling notches every 10o for excellent manual control in balancing up to 90o or shut off service. The valve may be padlocked in any one of the positions including opened or closed by virtue of a locking hole located in the handle and lever.
The position-lock can be used to set the valve in any position or as a memory stop so the valve may be reopened to the previous position.
The valve may be padlocked in full open or full closed position.
Ordering: Sold as a field retrofitable kit only.
MATERIAL LIST
PART SPECIFICATION
1. Handle
2. Lever-Lock
3. Throttle Plate
Polymer Coated Iron
Zinc Plated Steel
Zinc Plated Steel
PFD
Lever Lever Throttle Plate/
Size (STD) (STD)
DIMENSIONS AND TORQUE OUTPUT
Dimensions
Infinite Pos. Kit A B C D
2
¹⁄₂
”-3” T115107PP T115138PP T114841FG 10
¹⁄₂
1 4
⁵⁄₈
6
³⁄₁₆
4 T115108PP T115138PP T114842FG 10 ¹⁄₂ 1 4 ⁵⁄₈ 6 ³⁄₁₆
Torque Rated Output in Inch-Pounds
At 60 pounds Pull At 100 pounds Pull
540 In-Lbs. 900 In-Lbs.
540 In-Lbs. 900 In-Lbs.
Gear Operator options and accessories (2 1/2" through 4" 2000 series only)
2" Square Operating Nut Memory Stop Flag Indicator
Consult factory for: square operating nut, memory stop and flag indicator
2 1/2"-4"
Cast Iron Gear Operator
The NIBCO ® butterfly valve can be provided with heavy-duty operator and indicator. Recommended for valves 8" and larger, for trouble-free operation in all moisture and weather conditions (not submersible). Operator is a self-locking worm gear type. Equipped with adjustable stops at open and shut positions.
Ordering: Specify by adding (-5) to Fig. No., i.e., PFD2000-5. Babbit sprocket may be added to handwheel. See below for sizing information.
Available options: memory stop gear operator kit, 2" square operating nut, flag indicator and handwheel for GO.
PFD
VALVE
21/2 - 3
4
GEAR OPERATOR DETAIL FOR SIZES 2 1/2" TO 4" (PFD2000 ONLY) GEAR OPERATOR ACCESSORIES & REPLACEMENT PARTS
GEAR GEAR
OPERATOR RATIO OP
NUMBER WEIGHT A
DIMENSIONS (INCHES)
B C D E
STEM SPROCKET SQUARE
ADAPTER RIM OPERATING
F BUSHING MODEL NUT
FLAG MEMORY REPLACEMENT
INDICATOR STOP KIT HANDWHEEL
T117118PP 24:1 10 7.64 1.77 5.04 4.24 5.91 2.79 T046653PP #11/2 T117792FC T116682PP T026196PP T117122PP
T117118PP 24:1 10 7.64 1.77 5.04 4.24 5.91 2.79 T046654PP #11/2 T117792FC T116682PP T026196PP T117122PP
NOTE: 1. Stem adapter bushing must be ordered seperately when needed for smaller size valves.
2. All other accessories must be ordered separately. (Sprocket rim, square operator nut, flag indicator & memory stop kit.)
3. Gear operator comes with handwheel.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
67
A H E A D O F T H E F L O W ® www.nibco.com
Revised 8/7/2012
Butterfly Valve Technical Information
Valve Installation Procedure
Always position the connecting pipe flanges accurately in the line, allowing sufficient space between the flanges for the valve. Make sure the pipe flange faces are clean of any foreign material such as scale, metal shavings or welding slag. Valves should be installed with the disc in the closed position to prevent damage to sealing surfaces.
1. Carefully insert the valves between the pipe flanges. Do not apply any lubricants to the seat faces as this may damage them.
2. Line up, center and secure the valve between flanges using desired bolts or studs as listed in Table 4.
Do not tighten bolts at this time.
3. Carefully open the valve to assure free unobstructed disc movement. Disc interference may result when valves are installed in pipelines having
smaller than normal inside diameters, such as heavy wall pipe, plastic-lined pipe, as-cast flanges or reducing flanges. Interference can also occur
when connecting directly to a swing check or silent check. Suitable corrective measures must be taken to remove these obstructions, such as taper
boring the pipe or installing a spacer or spool piece.
4. After proper operation is verified, tighten the bolts using a cross-over pattern (Fig. 1) to the minimum
recommended bolt torques listed in Table 3.
5. Pressurize piping to valve and inspect for leakage. If leakage is observed, tighten bolts using
cross-over pattern, increasing torque until leak stops.
DO NOT EXCEED MAXIMUM TORQUES LISTED IN TABLE 3.
6. Recommended torques are made without warranty. Installer must verify proper strength bolts
for application. Bolts shall be clean and un-lubricated.
Table 3
Flange
Size
Recommended Bolt Tightening Torques
Bolt Minimum Bolt Maximum Bolt
Size Torque (ft.•lbs.) Torque (ft.•lbs.)
2 1/2"- 4" 5/8" 20 70
Caution
1. Class 250 cast iron and Class 300 steel flanges can not be used on these valves.
2. Rubber faced or mechanical flanges are not recommended.
3. This valve is not recommended for steam service.
4. Valves should not be assembled to the flanges and then welded into the piping system.
5. Do not install EPDM liner in compressed air lines.
Bolt Tightening
Cross Over Pattern
5
1
8
Table 4 Recommended Bolt Lengths
3 4
7
2
Fig. 1
6
1000/2000/3000 SERIES ONL
2 1/2" 1.81
0.69 — — — — 1.50 8/4
— 0.88 — — — 1.75 8/4
0.75 — — — — 1.50 8/4
3" 1.81
— 0.94 — — — 1.75 8/4
4" 2.06 0.94 0.94 — — — 1.75 16/8
5/8-11 UNC
5/8-11 UNC
5/8-11 UNC
Suggested
Bolting Method
Resilient Liner Materials
EPDM – EPDM is a terpolymer elastomer made from ethylene-propylene diene monomer. EPDM has good abrasion and tear resistance and offers excellent chemical resistance to a variety of acids and alkalines. It is susceptible to attack by oils and is not recommended for applications involving petroleum oils, strong acids or strong alkalines. EPDM should not be used on compressed air lines. It has exceptionally good weather aging and ozone resistance. It is fairly good in ketones and alcohols.
P roprietary compound formulas are used for each of the elastomers to provide the right combination of seat compression, abrasion resistance and chemical resistance to match your application. Elastomeric seat materials are not suitable for steam service.
Visit our website for the most current information.
68
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Tools, Jaws & Chains
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
69
A H E A D O F T H E F L O W ®
NIBCO ® Press System Tools
PC-280
1/2" through 4" www.nibco.com
Revised 7/25/2018
MATERIAL LIST
MODEL NO. DESCRIPTION LBS.
PC-280 Pressing Tool with 2 - 18V, 3.0 Ah Lithium-ion batteries, 110V battery charger & case
PC-10S 1/2" Standard Pressing Jaw (for PC-100 or PC-280)
PC-11S 3/4" Standard Pressing Jaw (for PC-100 or PC-280)
PC-12S 1" Standard Pressing Jaw (for PC-100 or PC-280)
PC-13S 1 1/4" Standard Pressing Jaw (for PC-100 or PC-280)
PC-14S 1 1/2" Standard Pressing Jaw (for PC-100 or PC-280)
PC-15S 2" Standard Pressing Jaw (for PC-100 or PC-280)
25.40
PC-16S 1/2"-1 1/4" (4 jaws) Standard Press Jaw Kit w/Case (for PC-100 or PC-280)
PC-17S 1 1/2"-2" (2 jaws) Standard Press Jaw Kit w/Case (for PC-100 or PC-280)
25.25
23.76
PC-2 2 1/2" Pressing Chain w/Case (for PC-100 or PC-280) 18.58
PC-3 3" Pressing Chain w/Case (for PC-100 or PC-280) 19.40
PC-4 4" Pressing Chain w/Case (for PC-100 or PC-280) 23.81
PC-234 2 1/2", 3" & 4" Pressing Chain Kit (for PC-100 or PC-280) 44.42
PC-5 PC-5 Pressing Chain Adapter Jaw
(note: must be used with 2 1/2", 3" & 4" chains) 7.01
4.14
4.18
4.52
4.30
9.61
9.26
PC-7L 18V, 3.0Ah Lithium-ion Battery (for PC-280 or PC-20M) 1.30
PC-8L 110V Battery Charger (for PC-4ML or PC-7L)
PC-9L AC Adapter (for PC-280 or PC-20M)
2.20
1.70
PC-10S thru PC-15S
Standard Pressing Jaws
PC-2 thru PC-4
Pressing Chains
PC-7L
18V, 3.0 Ah
Lithium-ion Battery
PC-280
Pressing Tool
PC-5
Pressing Chain
Adapter Jaw
PC-8L
110V Battery Charger
PC-280C Plastic Replacement Case for PC-280 Tool
PC-2C Metal Replacement Case for PC-2 or PC-3 Chain
PC-4C Metal Replacement Case for PC-4 Chain
PC-234C Plastic Replacement Case for PC-234 Chain Kit
7.50
8.10
8.10
7.72
PC-16SC Metal Replacement Case for PC-16S (1/2" - 1 1/4" Jaws) 8.10
PC-17SC Metal Replacement Case for PC-17S (1 1/2" - 2" Jaws) 4.40
PC-51
1/2" - 2" Deburring Tool
PC-9L
AC Adapter
PC-51 1/2" - 2" Deburring Tool 0.92
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
70
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ®
NIBCO ® Press System Tools
PC-20M
1/2" through 1"
MATERIAL LIST
MODEL NO. DESCRIPTION LBS.
PC-20M Mini Pressing Tool, 2 - 18V, 2.0 Ah Lithium-ion batteries,
110V charger & case (NO jaws)
PC-200M Mini Pressing Tool, 3 Jaws, 2 - 18V, 2.0 Ah Lithium-ion batteries, 110V charger & case
10.10
17.20
PC-1M 1/2" Jaw (for Mini Pressing Tool - PC-10M or PC-20M) 2.09
PC-2M 3/4" Jaw (for Mini Pressing Tool - PC-10M or PC-20M) 2.05
PC-3M 1" Jaw (for Mini Pressing Tool - PC-10M or PC-20M) 2.07
PC-4ML 18V, 2.0Ah Lithium-ion Battery (for PC-20M) 0.85
PC-7L 18V, 3.0Ah Lithium-ion Battery (for PC-280 or PC-20M) 1.30
PC-8L 110V Battery Charger (for PC-4ML and PC-7L) 2.20
PC-9L AC Adapter (for PC-280 or PC-20M) 1.70
PC-20MC Plastic Replacement Case for PC-10M & PC-20M)
PC-50 1/2" - 1" Deburring Tool
4.00
0.42
www.nibco.com
Revised 7/25/2018
PC-20M
Mini Pressing Tool
PC-200M
Mini Pressing Tool with
1/2", 3/4" and 1" Jaws
PC-1M, 2M, 3M
Mini Pressing Jaws
PC-4ML
18V, 2.0 Ah
Lithium-ion Battery
PC-8L
110V Battery Charger
PC-50
1/2" - 1" Deburring Tool
PC-7L
18V, 3.0 Ah
Lithium-ion Battery
PC-9L
AC Adapter
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
71
A H E A D O F T H E F L O W ®
NIBCO ® Press System Tools
PC-280 & PC-20M FEATURES
TOOLS
Light weight
PC-20M Mini: 3.7 lbs. (without jaw)
PC-280: 9.4 lbs. (without jaw)
Easy to handle / simple design
Jaws rotate 350°
No calibration necessary
No complicated switches or controls
Mini: Ergonomic compact design is easy to use in tight spaces
Interruptible crimp cycle
Safety feature prevents injuries
Can begin crimp, stop to align and level fitting / tube, and complete crimp
Battery
Can be changed during crimp cycle
Lithium-ion has short charging cycle and larger
capacity
• PC-4ML: 15 minute recharge time
• PC-7L: 22 minute recharge time
AC Power Adapter
Converts the tool to electric power
Allows continuous use
Service light
Illuminates at 10,000 cycles
Tool will not stop operating when light illuminates
• RED indicates battery charge status, service intervals, tool functions & faults
• WHITE illuminates the work area
Hydraulic Pressure Check (HPC)
An audible warning signal sounds if adequate working pressure is not achieved
PRESSING CHAINS (2 1/2" to 4" ONLY)
Uniform crimp
Maintains proper pipe alignment
Easy to install and remove
Once secured to fitting, chain cannot fall off prior to crimp
Chain easily removed post crimp
Crimp Identification
Easy to identify crimp has been made from a distance www.nibco.com
Revised 6/14/2021
PC-100 and PC-10M Accessories
MATERIAL LIST
MODEL NO. DESCRIPTION
PC-7 12V, NiMH Battery - 3.0Ah for PC-100
PC-8L 110V Battery Charger (for PC-4ML and PC-7L)
PC-4M 1.3 Ah NiCd 9.6V Battery for Mini Pressing Tool
PC-5M 120V Charger for Mini Pressing Tool
PC-100C Metal Case for PC-100 Tool
LBS.
1.57
2.20
0.85
1.13
14.30
PC-4M
9.6V, 1.3 Ah
NiCd Battery
PC-8L
120V Battery Charger
PC-7
12V, 3.0 Ah
NiMH Battery
Visit our website for the most current information.
72
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 4/25/2022
NIBCO ® Press System
Approved Tool and Jaw Compatibility Matrix
Pressing tool, jaw and chain sets are an integral part of ensuring a reliable, permanent connection between NIBCO Press System fittings, valves and copper piping. Only use pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO
Press System fittings and valves.
The following table details compatibility of approved pressing tools, chains and jaws with the NIBCO Press
System fittings and valves:
Standard Pressing Jaws (PC-10S, PC- 11S, PC-12S, PC-13S,PC-14S, PC-15S)
SIZE
NIBCO ® PC-280
NIBCO ® PC-100
RIDGID ® 320-E
RIDGID ® RP 330-B
RIDGID ® CT400
RIDGID ® RP 330-C
RIDGID ® RP 340
RIDGID ® RP-241
RIDGID ® RP-351
Rothenberger ROMAX ® Pressliner
Rothenberger ROMAX ® AC ECO
REMS Akku-Press
REMS Power-Press
Stanley ® VIRAX ® P20+
DEWALT DCE200
NIBCO ® PC-20M Mini
NIBCO ® PC-10M Mini
RIDGID ® 100-B Compact
RIDGID ® RP 210-B Compact
RIGID ® RP 200-B
Rothenberger Compact
Stanley ® VIRAX ® M20+ Compact
Milwaukee ® M12™ Force Logic™
Milwaukee ® M18™ Force Logic
™
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1/2” - 1”
— — — —
— — — —
— — — —
— — — —
— — — —
— — — —
—
—
—
—
—
—
—
—
—
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
YES —
YES —
—
—
YES
YES
— —
— —
— YES YES — — —
— YES YES — — —
— YES YES — — —
YES —
—
—
—
—
— YES — —
— — YES —
— — — YES
— — — — — —
—
—
—
YES
—
—
YES
YES
—
—
YES
YES
YES
YES
YES
YES
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1/2” - 2”
YES YES YES YES YES —
YES YES YES YES YES —
YES YES — — — —
YES
YES
YES
YES
—
—
—
—
—
—
—
—
YES YES — — — —
YES
YES
—
YES
—
—
—
—
—
—
—
—
YES YES — — — —
— — YES — — —
—
—
—
—
—
—
—
—
—
—
—
—
YES
—
—
—
YES
YES
—
—
—
—
—
—
—
—
—
—
—
—
—
— — YES — —
— — — — YES
— — — — —
—
—
—
—
—
—
—
—
—
—
—
—
—
—
— — — —
— — — —
— — — —
— — — —
— — — —
— — — —
— — — —
—
—
— — — YES —
—
—
—
—
—
For the latest listing of approved pressing tool, jaw and chain combinations, visit nibco.com.
NIBCO recommends minor tool service performed once per year and major service every three years.
For technical or service assistance, contact NIBCO Technical Services 1-888-446-4226.
RIDGID ® is a registered trademark of RIDGID, Inc.
ProPress ® is a registered trademark of Viega GmbH & Co
ROMAX ® is a regis–tered trademark of ROTHENBERGER
VIRAX ® is a registered trademark of Stanley Works
Milwaukee ® is a registered trademark of Milwaukee Electric Tool Corporation
FORCE LOGIC TM is a registered trademark of Milwaukee Electric Tool Corporation
DEWALT ® is a registered trademark of The Black & Decker Corporation
CAUTION:
NIBCO press fittings and valves
(2½”, 3”, 4” ends) to be installed ONLY with NIBCO pressing tools & chains.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
73
2 1/2 ” - 4”
YES
YES
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
A H E A D O F T H E F L O W ® www.nibco.com
Engineering Data
Visit our website for the most current information.
74
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/17/2019
NIBCO ® Press System — Engineering Data
Copper and Copper Alloy Fittings
Standards
O-ring seal joints are not new to the piping industry, but joining techniques like the NIBCO Press System are providing new alternatives for copper piping assembly. NIBCO has relied on its century of experience in copper and brass piping products to design the best performing and most dependable line of fittings possible.
Applications
The NIBCO Press System fittings are designed to join with ASTM B 88 seamless copper water tube in hard drawn/half-hard condition, Type K, L, and M; as well as, with annealed tubing in 1/2", 3/4" and 1" sizes for residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. Copper and copper alloy materials and EPDM elastomeric seals have a long history of compatibility with common chemicals used in these systems. A chemical resistance chart should always be referenced when other fluids are to be introduced.
NOTE: FLUIDS CONTAINING HYDROCARBON-BASED OILS ARE NOT
COMPATIBLE WITH THE EPDM SEAL.
Pressure/Temperature Limitations
-20°F to 250°F up to 200 psiG, non-shock working pressure except where otherwise noted.
Materials:
• Wrot Copper
◆
ASTM B 75 Alloy C12200
• Cast Copper Alloy
◆
ASTM B584-12a Alloy C87600 and C84400
• Elastomeric Seals
◆
EPDM O-rings compliant with IAPMO PS-117 and ASME B16.51
NIBCO ® press fittings meet all performance requirements of
ASME B16.51
Flow area consistent with ASME B16.22
NOTE: Freezing weather precaution — subsequent to testing a piping system, valve should be in an open position to allow complete drainage.
Performance
The following performance tests were conducted per ASME B16.51. The fitting dimensions, materials of construction and performance tests were witnessed and verified by internationally recognized NSF. A letter of verification is available upon request:
1. Dimensional Verification a. Inside diameter of press cup and waterway b. Outside diameter of press cup and waterway c. Wall thickness d. Threaded ends conformance to ASME B1.20.1
2. Hydrostatic Minimum Burst Strength Pressure
a. Fitting samples hydrostatically tested to a minimum of 600 psi
(three times the rated internal working pressure) at 73°F.
3. Unrestrained Hydrostatic Pressure Test at 68°F (20°C) and 200°F (93°C)
a. Fitting assemblies were filled with water and pressurized to 600 psiG at 68° and 200°F for 48 hours.
4. Static Torque
a. Fittings were filled with water, had a minimum torque applied and
released. Each fitting was then pressurized to 400 psiG for
48 hours.
5. Bending Test
a. A sample fitting was installed between two equal lengths of hard-
drawn copper tubing supported six (6) feet apart. A concentrated load was applied to the center of the fitting. The 1/2" thru 2" assemblies were subjected to 600 psiG water pressure and 2-1/2" thru 4" were subjected to 400 psi water pressure for one (1) hour at 68°F (20°C) .
6. Vacuum Pressure Test
a. Fittings were subjected to a vacuum pressure of 24.5 inches of mercury for one (1) hour at 68°F (20°C).
7. Cyclic Pressure Test
a. Fittings were subjected to a hydraulic shock pressure of 400 psiG for 10,000 cycles.
8. Vibration Test
a. Fitting assemblies were subjected to a hydrostatic cyclic vibration test at 400 psiG and 2-1/2" thru 4" were subjected to 400 psi water pressure for 1,000,000 cycles. After cycling, the 1/2" thru 2" assem- blies were pressurized to 600 psiG for 30 minutes and 2-1/2" thru 4" were pressurized to 400 psi for 48 hours.
9. Thermocycling Test a. Test assemblies were constructed using type L copper tube and press connect fittings. The test assemblies were subjected to flowing water at 145 psi cycled between 68°F (20°C) and 200°F
(93°C) for a period of 15 minutes at each temperature for nominal size 2" and smaller. Nominal size 2 1/2" and larger were pressurized with air and immersed in water at 68°F (20°C) and 200°F (93°C).
Cycling continued for 5,000 cycles for sizes 2" and smaller and 2,500 cycles for 2 1/2" and larger size fittings.
10. Dynamic Torque at 68°F (20°C) and 200°F (93°C)
a. Fittings were assembled between two lengths of hard-drawn
copper tubing. With one tube fixed, the other tube twisted ±5° for
10,000 cycles at 68°F (20°C) or 200°F (93°C). Each assembly was
then subjected to 400 psiG water pressure at 68°F (20°C) or 200°F
(93°C) for 1 hour.
Tests were performed with K and M hard drawn tubing. The thermocycle test used L hard drawn tube.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
75
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/17/2019
NIBCO ® Press System — Sample Specification
FITTINGS
2" and Smaller:
Fittings shall comply with NSF 61, CSA, UPC and be approved by the local jurisdiction. The NIBCO Press System may be used at the contractor’s option for the following building services piping - 20°F to +250°F up to
200 psi:
• Hot and Cold Domestic Water
• Potable Water
• Condenser and Chilled Water Service
• Hot Water Heating Service
Wrot copper press fittings shall be made from commercially pure copper mill products per ASTM B 75 Alloy C12200. Cast copper alloy press fittings shall be made from materials with a minimum of 78% copper and a maximum of 15% zinc. The press fittings connections shall be compatible with seamless K, L or M copper tube made to ASTM B 88 as well as 1/2", 3/4" and 1" annealed copper tubing. Fittings shall have a maximum non-shock working pressure of 200 psi between the temperatures of -20°F and +250°F.
Elastomeric seals shall be made of EPDM material, and the fittings shall be manufactured with an inboard bead design. All fittings shall be installed in accordance with the manufacturer’s installation instructions and according to local plumbing and mechanical codes. The press-to-connect joint shall be made with pressing tools and jaw sets recommended and authorized by NIBCO.
2 1/2 " through 4":
Fittings shall comply with NSF 61, CSA, UPC and be approved by the local jurisdiction. The NIBCO Press System may be used at the contractor’s option for the following building services piping - 20°F to +200°F up to
200 psi:
• Hot and Cold Domestic Water
• Potable Water
• Condenser and Chilled Water Service
• Hot Water Heating Service
Wrot copper press fittings shall be made from commercially pure copper mill products per ASTM B 75 Alloy C12200. Cast copper alloy press fittings shall be made from materials with a minimum of 78% copper and a maximum of 15% zinc. The press fittings connections shall be compatible with seamless K, L or M copper tube made to ASTM B 88. Fittings shall have a maximum non-shock working pressure of 200 psi between the temperatures of -20°F and +250°F. Elastomeric seals shall be made of EPDM material, and the fittings shall be manufactured with an inboard bead design. All fittings shall be installed in accordance with the manufacturer’s installation instructions and according to local plumbing and mechanical codes.
The press-to-connect joint shall be made with pressing tools and jaw sets recommended and authorized by NIBCO.
Visit our website for the most current information.
76
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 11/9/2017
NIBCO ® Press System — Sample Specification
VALVES
2" and Smaller Ball Valves: (on/off, isolation or throttling)
Ball valves with male or female press-to-connect ends shall be rated at 200 psi CWP to +250°F maximum. Valves shall be manufactured in accordance with MSS SP-110 and constructed of dezincification resistant cast bronze bodies. No brass containing more than 15% zinc shall be approved. Valve shall have reinforced PTFE seats, blow-out proof stem, full-port ball, chrome/nickel plated ball or 316 SS ball for aggressive water conditions. Where piping is to be insulated, ball valves shall be equipped with 2” extended handles of non-thermal conductive material. Handle to have extended sleeve incorporating an insulation plug to provide a vapor barrier and allow valve operation without disturbing the insulation, and a memory stop, which can be set after installation.
Acceptable Valves: (non-insulated lines):
NIBCO ® PC585-70, PF585-70 or PS585-70
(chrome/nickel plated ball)
NIBCO ® PC585-70-66, PF585-70-66, PS585-70-66 or PCM585-60
(316 SS ball)
Acceptable Valves: (insulated lines):
NIBCO ® PC585-70-NS, PF585-70-NS or PS585-70-NS
(chrome/nickel plated ball)
NIBCO ® PC585-70-66-NS, PF585-70-66-NS or PCM585-60-NS
(316 SS ball)
(Note to Specifier: Include press gate valves in addition/in lieu of press ball valves for ON/OFF and isolation services if requested or required.)
2" and Smaller Check Valves: (Back Flow Prevention)
Check valves (Y pattern, swing type or in-line) with male or female pressto-connect ends shall be rated at 200 psi CWP to +250°F maximum. Valves shall be manufactured in accordance with MSS SP-80. Body and cap to be manufactured of dezincification resistant cast bronze (ASTM B 62 or ASTM
B 584 Alloy C84400). Valves to have PTFE seat disc.
Acceptable Valves:
NIBCO ®
NIBCO ®
PF413-Y or PS413-Y - Y pattern, swing type check valve
PF480-Y or PS480-Y - in-line spring loaded silent check valve
Drain Valves
At all low points in water piping to be drained or vented, provide 1/2” or 3/4" ball valves with male or female press-to-connect ends by hose-end drain valves. Valves shall be rated by 200 psi CWP to +250°F maximum. Valves shall be manufactured in accordance with MSS SP-110. Valves to be constructed of dezincification resistant cast bronze bodies. Valve shall have reinforced
PTFE seats, blow-out proof stem, and be full port. All valves shall be provided with 3/4” hose connection with cap and chain.
Acceptable Valves:
NIBCO ® PS585-70-HC or PF585-70-HC
2" and Smaller Gate Valves: (On/Off and Isolation)
Gate valves with male or female press-to-connect ends shall be rated to 200 psi CWP at +250°F maximum. Valves shall be manufactured in accordance with MSS SP-80. Valve body, bonnet and wedge to be manufactured of dezincification resistant cast bronze (ASTM B 62). Stems shall be of silicon bronze (ASTM B 371) or low zinc alloy (ASTM B 99). Non-asbestos packing and malleable or ductile iron hand-wheel shall be standard.
Acceptable Valves:
NIBCO ®
NIBCO ®
PF111 or PS111 - rising stem gate valve
PF113 or PS113 - non-rising stem gate valve
2 1/2" thru 4" Butterfly Valves: ( On/Off, Isolation or Throttling )
Butterfly valves with female press-to-connect ends shall be rated at 200 psi
CWP to +250°F maximum. Valves shall be manufactured in accordance with
MSS SP-67 and constructed of a ductile-iron body, for bubble-tight shutoff, extended-neck for insulation, disc and lining suitable for potable water, valves shall be suitable for bi-directional dead end service at full rated pressure, one-piece Type 416 stainless-steel stem, copper bushing, fasteners and pins shall not be used to attach stem to disc, no pins or fasteners in waterway, aluminum-bronze disc, and molded-in EPDM seat (liner).
Acceptable Valves:
NIBCO ® PFD2000 series
2" and Smaller Globe and Angle Valves: (Throttling Service)
Globe and angle valves with male or female press-to-connect ends shall be rated to 200 psi CWP at +250°F maximum. Valves shall be manufactured in accordance with MSS SP-80. Valve body, bonnet and wedge to be manufactured of dezincification resistant cast bronze (ASTM B 62). Stems shall be of silicon bronze (ASTM B 371) or low zinc alloy (ASTM B 99). Nonasbestos packing and malleable or ductile iron hand-wheel shall be standard.
Acceptable Valves:
NIBCO ®
NIBCO ®
PF211-Y or PS211-Y - globe valve
PF311-Y or PS311-Y - angle valve
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
77
A H E A D O F T H E F L O W ® www.nibco.com
Installation Instructions
Visit our website for the most current information.
78
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/17/2019
NIBCO ® Press System — Installation Instructions
NIBCO Press System
The NIBCO Press System, when used with tested and authorized pressing tools and jaws, is designed to mechanically crimp fittings and valves onto copper tubing to create a watertight, permanent seal. When the switch on the pressing tool is depressed a small hydraulic pump generates thousands of pounds of crimping force to install the specially designed fittings and valves.
System Components
Fittings and Valves
NIBCO Press System copper or bronze fittings and valves
Tubing
ASTM B 88 seamless Hard Drawn Copper Water Tube: Types K, L and M as well as 1/2", 3/4" and 1" annealed copper tubing.
Pressing Tools, Chains and Jaws
The pressing tool, chain and jaw are important parts of ensuring a reliable, permanent connection between NIBCO Press System fittings and valves and the copper water tube.
CAUTION — Use only pressing tools and jaw sets that have been tested and authorized for use with NIBCO Press System fittings and valves (1) . Use of unauthorized pressing tools and/or jaws may result in an improper seal that could cause extensive property damage.
Pressing Tool Safety
• Only use authorized pressing tools and jaws with NIBCO Press System fittings and valves. Other uses or modification of the jaws for other applications may damage the press tool, damage the jaws and/or cause personal injury.
• Keep fingers and hands away from jaws during pressing cycle. Your fingers or hands can be crushed, fractured or amputated if they become caught between the jaw tips or between the jaw and any other object.
• Always wear safety glasses while using pressing tools and jaws.
• Never attempt to repair a damaged jaw set. A jaw that has been modified in any manner can fail during crimping resulting in serious injury. Discard the entire damaged jaw set. Replace with a new jaw set.
WARNING: Please read these installation instructions and the manufacturer's pressing tool and jaw operators manual(s) carefully prior to installation of the NIBCO Press System. Failure to understand and follow the contents of this manual may result in extensive property damage, severe personal injury or death.
Please contact NIBCO Technical Services at 888.446.4226 if you have installation questions.
(1) See approved tool and jaw compatibility matrix in this catalog.
Chemical Compatibility
Please consult the most current edition of the NIBCO Chem-Guide for recommendations regarding chemical compatibility of material exposure to specific media and media-treatment additives. The NIBCO Chem-Guide is a general guide on the topic of chemical compatibility and is by no means an exhaustive resource on the subject. Ultimately, proper material selection is the responsibility of the installer and/or end-user, taking into account all aspects of a system’s design and intended use.
Galvanic Potential in Piping Systems
Galvanic corrosion or dissimilar metal corrosion is an electrochemical process that is created through the electrical interaction of two different metals under the influence of a conductive media (i.e. an electrolyte). An electrolytic cell, much like a battery, is generated by these dissimilar metals using water as the electrolyte.
The electrical charge, developed within the electrolytic cell, drives a preferential attack on the more electrically active metal with the water acting as the recipient of the discarded metal ions. Such galvanic attack is often encountered in service where iron or steel components are installed, and later corrode, in a largely copper piping system. Please consult NIBCO Technical Bulletin NTB-0714-01 Dielectric Products Relative to Electrolysis and Galvanic Corrosion.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
79
A H E A D O F T H E F L O W ® www.nibco.com
Revised 11/9/2017
NIBCO ® Press System — Installation Instructions
Installation Instructions for 1/2" - 2"
Press Fittings and Valves
WARNING:
To prevent serious injury, inspect the pressing tool, battery charger (if applicable) and jaw sets according to the procedure outlined in the pressing tool instruction manual prior to beginning installation.
Failure to clean jaws can result in an improper connection that can lead to extensive property damage.
Preparing the Copper Tube
1. Select clean, undamaged copper tube and cut to desired length. Cut tube end square using a tube cutter or fine-toothed saw. Do not crimp over damaged, scratched, gouged, or otherwise damaged tubing ends. Do not crimp over etch print streams on tubing. (Figure 1).
Figure 3 — Marking for Insertion Depth
2. Mark the tube with a permanent marker to indicate the proper tube insertion depth (Figure 3) .
3. Refer to the minimum insertion depth table for correct depths
4. Insert the tube into the fitting or valve using a twisting motion. Make sure that the tube is fully inserted into the fitting stop or shoulder.
Figure 1 — Cut tube to desired length
2. Deburr the tube inside and outside diameter using a half-round file or a deburring tool.
3. Clean the tube end of all dirt, oil and grease. (Emery cloth or sandpaper to clean the tube or remove oxidation should not be used .)
Inserting the Tube into the Fitting or Valve
1. Check the fitting to make sure the EPDM seal is in place, clean and free of dirt and debris (Figure 2) .
Tube Size
Inches
1/2
3/4
1
1 1 ⁄
4
1 1 ⁄
2
2
Insertion Depth (min.)
Inches
11/16
7/8
7/8
1
1 3 ⁄
8
1 1 ⁄
2 mm
18
22
22
25
35
38
CAUTION: Tubing that is difficult to insert may have burrs or could be out-of-round. Burrs must be removed and tubing end must be undamaged.
Make sure tube is inserted to the proper depth. Failure to do so may result in an improper seal.
Attaching Pressing Jaws
1. Make sure the battery is removed or the cord is unplugged on the pressing tool prior to attaching or changing the crimp jaws.
2. Push and twist to open the jaw set mounting pin. (Figure 4) .
Figure 2 — Check for EPDM Seal
WARNING: Never lubricate the EPDM seal in the NIBCO Press System fitting or valve with anything other than water. Oil-based lubricant, dirt or debris may damage the seal. An improper seal can lead to extensive property damage.
Figure 4 — Pushing and twisting to open the jaw set mounting pin
3. If press tool contains a jaw set, slide it out of the crimping tool.
Visit our website for the most current information.
80
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 11/9/2017
NIBCO ® Press System — Installation Instructions
4. Select the jaw set that corresponds to the size of the joint to be crimped and insert the jaw set into the pressing tool (Figure 5) .
Figure 5 — Inserting the NIBCO Press System jaw
5. Push the jaw set mounting pin until it clicks into position.
NOTE: The tool will not properly press unless the pin is fully engaged.
Crimping a NIBCO Press System Fitting or Valve
1. Make sure the tubing is inserted to the proper depth in the fitting.
(Figure 6).
Figure 6 — Inserting the tube to proper depth
2. Squeeze jaw arms to open the jaw set.
3. Place the open jaws around the fitting and ensure that the contour of the jaw is properly aligned with the contour of the fitting (Figure 7) .
Figure 8 — Jaw set should be square to tubing
5. Once the crimp is complete, press the jaw arms to open the jaw and remove from the fitting.
If the tool displays an LED flash or emits an audible alarm, please refer to the tool instruction manual for troubleshooting suggestions.
CAUTION Avoid handling sharp edges that may have formed on the fitting during the crimping operation.
Inspecting the Crimp
1. Inspect the crimped fitting to ensure proper crimp.
NOTE: The use of the NIBCO Press System jaw will produce a unique witness mark “N” on the crimped fitting.
2. Inspect the crimped fitting checking the connection for the following problems:
• Not fully inserted tube, double check depth marks
• Incorrect jaw alignment with the fitting contour
If any problems are found, a new section of tubing and a new fitting will need to be prepared, installed and crimped.
3. Test the NIBCO Press System in accordance with crimp intergrity testing instructions for fittings and valves in this catalog.
Figure 7 — Open the jaw set and place around the fitting
4. Make sure the tool is perpendicular to the tubing and depress the switch
(Figure 8) . Keep the trigger depressed from the time the cycle begins and the rollers contact the jaw arms until the end of the entire crimp cycle.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
81
A H E A D O F T H E F L O W ® www.nibco.com
Revised 11/9/2017
NIBCO ® Press System — Installation Instructions
Installation Instructions for 2 1/2" - 4"
Press Fittings and Valves
WARNING : To prevent serious injury, the pressing tool, battery charger
(if applicable) and pressing chains should be inspected according to the procedure outlined in the pressing tool instruction manual prior to beginning installation.
Failure to clean pressing chains can result in an improper connection that can lead to extensive property damage.
Preparing the Copper Tube
1. Select clean, undamaged copper tube and cut to the desired length. Cut tube end square using a tube cutter or fine-toothed saw. Do not crimp over damaged, scratched, gouged, or otherwise damaged tubing. Do not crimp over etch print streams on tubing (Figure 1).
Figure 4: Deburr outside diameter using a half-round file
4. Clean the tube end of all contamination, oils and shavings. A smooth transition chamfer is recommended to ease tube insertion past the seal. (Emery cloth or sandpaper to clean the tube or remove oxidation should not be used .)
Inserting the Tube into the Fitting or Valve
1. Check the fitting to make sure that the seal is in place and is free of oil or grease. Only original NIBCO ® EPDM seals are to be used when making a press connection with NIBCO Press System fittings and valves. If it is necessary to lubricate the seals, use water only. DO NOT use any petroleum-based lubricants (Figure 5) .
Figure 1: Cut tube to desired length using s tube cutter
2. Deburr the tube inside diameter using a half-round file or deburring tool.
Remove any copper shavings or filings (Figures 2 & 3) .
Figure 2: Deburr inside diameter using a half-round file
Figure 5: Check for EPDM seal
WARNING: Never lubricate the EPDM seal in a NIBCO Press System fitting or valve with anything other than water. Oil-based lubricants, dirt or debris may damage the seal. An improper seal can lead to extensive property damage.
2. Mark the proper insertion depth on the tube with a permanent marker prior to insertion, based on insertion depth chart. Refer to minimum insertion depth table for correct depths.
Tube Size 2 1 /
2
” 3” 4”
Insertion Depth (min.)
NIBCO ® Press System
Insertion Depth Chart
1 1 /
2
” 1 5 /
8
” 2 1 /
8
”
Figure 3: Deburr inside diameter deburring tool
3. Deburr the tube outside diameter using a half-round file to prevent damage to the EPDM seal (Figure 4) .
3. Insert the tube into the fitting or valve using a twisting motion. Make sure that the tube is fullly inserted into the fitting or valve.
WARNING: If tube is not inserted to the proper depth, an inadequate seal may result.
CAUTION: Tubing that is difficult to insert may have burrs or could be out-of-round. Burrs must be removed and tubing end should be undamaged.
Make sure tube is inserted to the proper depth. Failure to do so may result in an improper seal.
Visit our website for the most current information.
82
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 11/9/2017
NIBCO ® Press System — Installation Instructions
Crimping a NIBCO Press System Fitting or Valve
CAUTION:
NIBCO press fittings and valves
(2½”, 3”, 4” ends) to be installed ONLY with:
• NIBCO PC-100 and PC-280 pressing tools
• NIBCO PC-5 adapter jaw
• NIBCO pressing chain - 2½” (PC-2),
3” (PC-3), 4” (PC-4)
1. Make sure that the battery is removed or that the cord is unplugged on the pressing tool prior to attaching or changing the adapter jaw.
2. Select the correct size pressing chain. Pull the pin on the chain which allows the segments to open. Position the chain on the raised bead and wrap the chain around the fitting with the "pipe side" designation facing the tube. When the chain is fully wrapped around the fitting, reinsert the pin to secure the chain on the assembled joint. Visually inspect the mark made for insertion depth, to ensure the tube remained in position (Figure 6) .
Figure 8: Placement of adapter jaw into pressing chain
5. Make sure the tubing is inserted to the proper depth in the fitting or valve, and that the tube and fitting or valve are aligned properly.
6. With the pressing tool perpendicular to the tube, begin the pressing cycle by pulling the trigger of the pressing tool.
7. Keep the trigger depressed from the time the cycle begins and the rollers contact the jaw arms until the end of the entire cycle. Remove the pressing tool and adapter jaw from the pressing chain. Remove the pressing chain from the fitting.
If the tool displays an LED flash or emits an audible alarm, please refer to the toolinstruction manual for troubleshooting suggestions.
CAUTION: Avoid sharp edges that may have formed on the fitting during the crimping operation.
Inspecting the Crimp
1. Inspect the crimped fitting or valve to ensure proper crimp. The final crimp should appear pressed uniformly around the fitting or valve (Figure 9) . Figure 6: Placement of the pressing chain onto fitting or valve
3. Release the pin (push and twist) on the jaw holder of the pressing tool, and install the adapter jaw on the tool. Return the pin to its original position, securing the jaw. The red sleeve on the tool must be in the back position to allow for crimping sizes 21/2”, 3” and 4” (Figure 7) .
Figure 7: Placement of adapter jaw into the tool
4. Squeeze adapter jaw arms to open the jaw. Rollers must be fully retracted to open the adapter jaw. Place the open adapter jaw into the grooves in the pressing chain and let go of the jaw arms (Figure 8).
Figure 9: Inspection of final crimp
NOTE: The use of the NIBCO Press System chain will produce a unique witness mark “N”.
2. Inspect the crimped fitting checking the connection for the following problems:
• Not fully inserted tube, double check depth marks
• Incorrect chain alignment with the fitting contour
If any problems are found, a new section of tubing and a new fitting will need to be prepared, installed, and crimped.
3. Test the NIBCO Press System in accordance with crimp integrity testing instructions for fittings and valves in this catalog.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
83
A H E A D O F T H E F L O W ® www.nibco.com
Revised 2/28/2020
NIBCO ® Press System — Crimp Integrity Testing
Instructions for Fittings & Valves
PRESSURE TESTING:
NIBCO recommends the following leak testing procedures when installing NIBCO Press System with the leak detection feature. These test procedures allow the installer to find un-pressed connections while the system is being tested under pressure.The uniquely designed EPDM o-ring allows fluids or gases to flow past the seal and leak when the fitting has not yet been pressed. When the fitting has been pressed, the o-ring will create a water tight seal around the tube.
AIR LEAK TESTING:
1. Pressurize system up to 15 psi maximum using dry, oil free compressed air, carbon dioxide, or nitrogen.
2. Allow system pressure to stabilize for a minimum of 2 hours.
3. If system pressure has dropped, add more air to bring entire system up to 15 psi maximum. If system pressure increases above 15 psi, bleed off excess pressure to ensure system is at a maximum pressure of 15 psi.
4. If the system pressure continues to drop, inspect all joints for un-pressed fittings. The NIBCO Press System press fittings with the leak detection feature are designed to leak in an un-pressed condition.
5. Check all press joints for air leaks using a commercially available leak test solution or a soap and water mixture. Do not use a soap that contains Mineral
Spirits or a Hydrocarbon/ petroleum that might attack the EPDM O-rings.
6. Once the system has been confirmed to be leak free, pressure can be increased to the recommended working pressure to verify system integrity.
WATER LEAK TESTING:
1. Pressurize system up to 50 psi maximum using potable water.
2. Allow system pressure to stabilize for a minimum of 2 hours.
3. If system pressure has dropped, add more water to bring entire system up to 50 psi maximum. If system pressure increases above 50 psi, bleed off excess pressure to ensure system is at a maximum pressure of 50 psi.
4. If the system pressure continues to drop, inspect all joints for un-pressed fittings. The NIBCO Press System press fittings with the leak detection feature are designed to leak in an un-pressed condition.
5. Check all press joints for leaking water.
6. Once the system has been confirmed to be leak free, water pressure can be increased to the recommended working pressure to verify system integrity.
SYSTEM INTEGRITY TESTING*:
Once a system has been confirmed to be properly installed and no press connections have been left uncrimped , the system is recommended for testing up to the maximum non-shock working pressure of 200 psi hydrostatic.
NOTE: While NIBCO Press System products are tested to pressures as high as 600 psi, the product system rating limitation of 200 psi is in place to ensure a safety factor of three-times proof-testing according to ASME B16.51 Copper and Copper Alloy Press-Connect Pressure Fittings.
SYSTEM INTEGRITY TESTING AT HIGHER PRESSURES*:
NIBCO Press System products can be tested at hydrostatic pressures higher than 200 CWP, not exceeding a maximum pressure of 300 psi hydrostatic for a maximum test duration of 24 hours, when assembled and tested according to the methods prescribed above.
CAUTION: These testing parameters and protocols apply only to NIBCO products as detailed above: NIBCO accepts no responsibility or liability for any other manufacturer’s products that may be damaged as a result of such testing.
*System integrity testing applies to leak detect and non-leak detect fittings and valves.
Visit our website for the most current information.
84
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/15/2021
NIBCO ® Press System — Installation Instructions
Minimum Distance Between Joints
To prevent distortion of the tubing, certain fitting sizes require a minimum distance between crimp joints (refer to Chart 1 below). Failure to provide this minimum distance may result in an improper seal.
Spacing
1. Sufficient clearance must be left around each joint to allow room for the pressing tool and jaw to be attached without interference.
Clearance Requirements — Standard Jaw Sets
Tool perpendicular to wall
A (min.)
Tube Dia. Inches mm
1
3
⁄
⁄
2
4
"* 0 0
"* 0 0
1"*
1
1 1
1 ⁄
4
0 0
"* 0 0
⁄
2
"* 0 0
2"*
2 1 ⁄
2
"
3"
4"
3
3
3 ⁄
⁄
0
8
0
" 10
⁄
8
" 10
8
" 10
*No minimum distance required.
Tube Dia.
1 /
2
3 /
4
1
1 1 /
4
1 1 /
2
2
A (min.) B (min.)
Inches mm Inches mm
15
1
1
7
1
1
/
/
16
2
2
/
/
8
4
8
24
22
31
29
51
51
1 5 /
8
2 1 /
8
2 1 /
2
2 7 /
8
4 3 /
8
4 3 /
8
41
54
64
73
111
111
Tool angled to wall
System Support
CAUTION — In any installation, the system should be suported to ensure the minimum stress is imposed on the tube and joints. The NIBCO Press
System should be supported in accordance with normal practice and to local jurisdiction piping code.
Softening of Copper Tubing
A NIBCO Press System installation should not be conducted within 12" of a brazed joint. The high temperature required for capillary joinery may cause the copper tube to become annealed and render it too soft for proper crimping. However, a NIBCO Press System product may be crimped adjacent to a soldered joint, as normal temperatures created by silver soldering are not hot enough to cause the copper tube to become annealed.
CAUTION — Brazing or soldering should not be conducted within 12" of an existing NIBCO Press System connection as this may damage the EPDM seal. If there is any concern about heat damage to the O-ring, a cold, wet cloth should be wrapped around the crimped connection prior to soldering or brazing.
Tube Dia.
1
1
1 /
2
3 /
4
1 /
4
1
1 1 /
8
28 1 3 /
8
35 2 1 /
2
64
1
5
1
1
/
/
A (min.) B (min.) C (min.)
16
4
26 1 1 /
2
38 2 1 /
2
64
34
32
1
2
3
1
/
/
4
4
45 3
57 3 1 /
8
76
80
1 1 /
2
2 1 /
8
54 3 1 /
8
80 5 127
2 2 1 /
8
54 3 1 /
8
80 5 127
2 1 /
2
3 5 /
8
92 3 7 /
8
98 5 3 /
8
137
3
4
3 7
5
/
8
98
127
4
5
3
1 /
/
4
2
120 6
140 7
7
7 /
/
8
8
175
200
NOTE: Clearance dimensions for 2 1 chains around fittings.
/
2
", 3" & 4" are for wrapping pressing
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
85
A H E A D O F T H E F L O W ® www.nibco.com
Revised 9/17/2019
NIBCO ® Press System — Frequently Asked Questions
What is the NIBCO product offering?
The NIBCO Press System features a full range of copper and copper alloy fittings, commercial valves, accessories and pressing tools, jaws and chains for use with K, L and M copper water tube as well as 1/2", 3/4" and 1" annealed copper tubing.
What is the system temperature rating?
The NIBCO Press System is rated at 200 psiG over a temperature range of -20°F to 250°F.
What are the approved system applications?
Approved applications include residential and commercial potable, hot, chilled and process water for plumbing and HVAC systems.
The NIBCO Press System is designed for use with water glycol mixtures of ethylene or propylene glycol up to 50% at 200°F.
What was the testing protocol for the NIBCO Press System fittings and valves?
NIBCO Press System fittings and valves were subjected to a wide range of performance tests including dimensional verification, thread end specification, hydrostatic burst strength, unrestrained pressure, static torque, bending, vacuum pressure, cyclic pressure, vibration, thermo-cycling and dynamic torque. The testing protocol included testing to a 3X safety factor above the 200 psiG system rating.
NIBCO testing was witnessed and validated by the internationally recognized NSF.
Can other available pressing tools and jaws be used on the NIBCO Press System?
See our Approved Tool and Jaw Compatibility Matrix for a complete listing of approved tools and jaws.
Can a NIBCO Press System connection be re-crimped?
If for any reason the press cycle is interrupted, it is possible to re-crimp a NIBCO Press System connection. However, when re-crimping the connection, the jaws must be properly aligned so that the crimp is performed in the same location as the original.
How long will the EPDM seal last?
Accelerated life tests show that the EPDM seals used with the NIBCO Press System fittings and valves have a life expectancy of 50 years.
Are NIBCO Press System fittings available with solder or threaded by Press System connection?
NIBCO offers many Press System fitting combinations by soldered or threaded connection. Please note, always solder the standard wrot connection first when possible. Prior to soldering, remove the press end EPDM o-ring, solder, allow the fitting to cool, insert the EPDM O-ring, and then Press the connection.
Can a fitting be soldered close to a Press System connection?
NIBCO recommends soldering at least 12 inches away from the Press System connection. If this length is not possible, either solder the joint prior to connecting the press fitting or wrap the connection with a cold wet cloth.
Is the NIBCO Press System approved for underground use?
In accordance with local plumbing codes, the NIBCO Press System can be installed underground.
Is the NIBCO Press System compatible with standard disinfectant cleaning agents commonly utilized in a new water system?
Yes, the NIBCO Press System is typically compatible. For specific cleaning agent compatibility, contact NIBCO Technical Services at the below noted number.
Visit our website for the most current information.
86
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W ® www.nibco.com
Revised 11/22/2021
NIBCO ® Press System Limited Warranty
NIBCO INC. LIMITED WARRANTY
Applicable to NIBCO Press System
NIBCO INC. warrants each NIBCO Press System fitting and flange to be free from defects in materials and workmanship under normal use, service, and maintenance in accordance with the product specifications (including, but not limited to installation recommendations) for a period of fifty (50) years from the Warranty Commencement Date. The Warranty Commencement Date shall be the date of installation.
NIBCO Press System pressure rated metal valves to be free from defects in materials and workmanship under normal use, service, and maintenance in accordance with the product specifications (including, but not limited to installation recommendations) for a period of five (5) years from the Warranty Commencement Date, except for model PC-FP-600A-LF for which a period of two (2) years from the
Warranty Commencement Date shall apply. The Warranty Commencement Date shall be the date of installation.
NIBCO Press System tools to be free from defects in materials and workmanship under normal use, service, and maintenance in accordance with the product specifications for a period of two (2) years from the date of purchase.
NIBCO Press System fittings, flanges, valves, and tools are referred to herein as “NIBCO Products.”
NIBCO will repair or replace – at its option and at no charge –NIBCO Products that have been determined by NIBCO, or an authorized representative or agent thereof, to have failed solely because of a defect in materials or workmanship under normal use, service, and maintenance during the warranty period. Replacements shall be shipped free of charge to the owner.
This limited warranty applies to all NIBCO Products installed, tested, applied, and used in accordance with NIBCO’s approved and published recommendations and instructions.
This warranty does not cover any failure or damage for or caused by:
1. any product, parts, or systems which are not manufactured or sold by NIBCO;
2. any NIBCO Product which is used for purposes other than a purpose authorized by NIBCO;
3. any NIBCO Product not installed, tested, applied, used, or maintained in accordance with NIBCO’s recommended installation guidelines and instructions;
4. any NIBCO Product not installed or used in accordance with applicable codes;
5. any damage caused by, contributed in whole or in part by, or resulting from, any of the following: a. abuse, misuse, mishandling, alteration, tampering, neglect, or accidental damage such as, without limitation, vandalism; b. natural disasters, such as, without limitation, flooding, windstorm, and lightning; c. attachments or modifications not authorized by NIBCO; d. external, physical or chemical qualities, or an unsuitable or hostile environment; e. any defects other than those in material or workmanship; or f. any other cause beyond the control of NIBCO.
NIBCO DISCLAIMS ANY AND ALL LIABILITY FOR ANY OTHER DIRECT OR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY KIND, INCLUDING BUT NOT LIMITED TO, ECONOMIC LOSS, LOSS OF BUSINESS, LOST PROFITS, PUNITIVE
DAMAGES, MOLD INTRUSION, WATER DAMAGE, ETC.
Some states do not allow the exclusion or limitation of damages, so the above limitation or exclusion may not apply to you.
THIS WARRANTY IS THE ONLY WARRANTY FOR THE NIBCO PRODUCTS PROVIDED BY NIBCO, AND IS AND SHALL BE IN LIEU OF
ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, AN IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND FOR ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART
OF A MANUFACTURER. NO EMPLOYEE OF NIBCO, OR ANY OTHER DISTRIBUTOR, AGENT, OR OTHER PERSON OR BUSINESS, IS
AUTHORIZED TO MAKE ANY OTHER WARRANTY ON BEHALF OF NIBCO.
Some states do not allow limitations on implied warranties, so the above limitation may not apply to you.
In the event any defect occurs which is believed to be covered by this warranty, NIBCO Technical Services must immediately be contacted by calling 888.446.4226 or emailing [email protected].
NIBCO Technical Services after being contacted will make further arrangements for the product’s return to
NIBCO at the customer’s expense for review and evaluation.
Visit our website for the most current information.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
87
A H E A D O F T H E F L O W ® www.nibco.com
Revised 11/9/2017
How to Order
State quantity, figure number and size for each valve you wish to order. See individual valve catalog pages for specific or special product designations.
HOW MANY TO ORDER
NIBCO valves are decimal packed for your convenience in handling, shipping and stock-keeping. Number in master carton varies with item.
POLICY ON RETURNS TO FACTORY
NO NIBCO valves are to be returned without prior written agreement.
Transportation must be prepaid. A 20% charge will be made to cover cost of rehandling and reinspection.
TECHNICAL ASSISTANCE
Engineers, contractors, wholesalers or manufacturers may obtain special or technical assistance from any factory representative of NIBCO. Write, fax or phone.
NIBCO INC.
World Headquarters
1516 Middlebury Street
Elkhart, IN 46516-4740
USA
Phone: 1.574.295.3000
Fax: 1.574.295.3307
Technical Service Phone: 1.888.446.4226
Fax: 1.888.336.4226
To the best of our knowledge, the information contained in this publication is accurate. However, NIBCO does not assume any liability whatsoever for the accuracy or completeness of such information. Final determinations of the suitability of any information or product for the use to be contemplated is the sole responsibility of the user. The manner of that use, and whether there is any infringement of patents, is also the sole responsibility of the user.
88
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
globally
connecting
you at all levels
It’s a new age of business, and a new way at NIBCO.
From Elkhart, Indiana to
Lodz, Poland, and points beyond, our company has integrated manufacturing, distribution, and networked communications to provide a seamless source of information and service,
24 hours a day, 7 days a week. But this integration hasn’t happened overnight.
It’s been part of a longterm strategic process that has pushed us to reconsider every aspect of our business. The result? We’re a vertically integrated manufacturer with the products and systems in place to deliver low cost and high quality. NIBCO products are manufactured under a Quality Management
System conforming to the current revision of ISO-9001
International Standards.
We know the flow control industry is only going to get more demanding, and we are more than ready. We will continue to lead. That’s what NIBCO is all about.
World
Headquarters
Elkhart,
Indiana
M A N U F A C T U R I N G D I S T R I B U T I O N I N T E R N AT I O N A L
Metal Valves and Fittings
Plastic Pipe,
Valves, and Fittings
Industrial
Plastics
International U.S. Distribution
Centers
Global Offices
*
Blytheville,
Arkansas
McAllen,
Texas
*
Greensboro,
Georgia
*
Goshen,
Indiana
*
Lebanon,
Ohio
*
Charlestown,
Indiana
Reynosa, Mexico
*
Lodz, Poland
Elkhart, Indiana Elkhart, Indiana
Lodz, Poland
Nacogdoches,
Texas
*
Stuarts Draft,
Virginia
Worcester,
Massachusetts
*Denotes U.S. and International Direct Shipping Locations
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH:1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
VALVES
Pressure-rated bronze, iron and alloy-iron gate, globe and check valves • Pressurerated bronze ball valves • Boiler specialty valves • Commercial and industrial butterfly valves • Lined butterfly valves • Circuit balancing valves and kits •
Carbon and stainless steel ball valves • ANSI flanged steel ball valves • Lined ball valves • Pneumatic and electric actuators and controls • Grooved ball and butterfly valves • High performance butterfly valves • UL/FM fire protection valves
• MSS specification valves • Bronze specialty valves • Low pressure gate, globe, check and ball valves • Frostproof sillcocks • Quarter-turn supply stops • Quarterturn low pressure valves • PVC and CPVC plumbing and industrial ball valves •
Bronze and iron y-strainers • Sample valves • Sanitary valves • Lead-free valves
• Hydronic valves • Labor saving valves • Manifold systems • Water temperature control valves • System quality valves • Press x PEX transition valves
F I T T I N G S
Wrot and cast copper pressure and drainage fittings • Cast copper alloy flanges •
Powder coated steel companion flanges • Wrot and cast press fittings • ABS and
PVC DWV fittings • Schedule 40 PVC pressure fittings • CPVC CTS fittings • CPVC
CTS-to-metal transition fittings • Schedule 80 PVC and CPVC systems • Lead-free fittings • Press x PEX transition fittings • Cast bronze push fittings
LEAD-FREE: Weighted average lead content ≤ 0.25%
FLEXIBLE PIPING SYSTEMS
PE-RT and PEX tubing for potable and radiant applications • Insulated tubing •
Risers • Ice maker tubing • Silicon Performance Bronze
®
fittings • Poly alloy fittings
• Home Run Manifold
®
• Radiant heat manifolds • Ball valves and supply stops •
Connections, tools and accessories • Radiant heat controls and panels
INDUSTRIAL PLASTICS
PVC and Corzan
®
CPVC schedule 80 fittings, true union ball and ball check valves, butterfly valves, and specialty valves • Polypropylene and Kynar
®
PVDF schedule 80 pipe, fittings, and true union ball and ball check valves • Pneumatic and electric actuation systems
Corzan ® CPVC is a registered trademark of Lubrizol Advanced Materials.
Kynar
®
is a registered trademark of Arkema Inc.
eNIBCO
EDI—Electronic Data Interchange • VMI—Vendor Managed Inventory •
NIBCO.com • NIBCOpartner.com
C-NPS-0619
N I B C O I N C .
W O R L D H E A D Q U A R T E R S
W E B : w w w . n i b c o . c o m
1 5 1 6 M I D D L E B U R Y S T R E E T
E L K H A R T, I N 4 6 5 1 6 - 4 7 4 0
U S A
D O M E S T I C C U S T O M E R S E R V I C E
P H O N E : 8 0 0 . 2 3 4 . 0 2 2 7
F A X : 8 0 0 . 2 3 4 . 0 5 5 7
T E C H N I C A L S E R V I C E
P H O N E : 8 8 8 . 4 4 6 . 4 2 2 6
F A X : 8 8 8 . 3 3 6 . 4 2 2 6
I N T E R N AT I O N A L O F F I C E
P H O N E : + 1 / 5 7 4 . 2 9 5 . 3 3 2 7
F A X : + 1 / 5 7 4 . 2 9 5 . 3 4 5 5
C-NPS-0619-R042522 © 2022 NIBCO INC., All Rights Reser ved. Printed in U.S.A.
Download
Public link updated
The public link to your chat has been updated.
Document public link
Advertisement
