Crystorama WIN-617-GA-CL-MWP Winham 6-Light Antique Gold Linear Chandelier Instructions
Crystorama WIN-617-GA-CL-MWP is a stunning chandelier that combines elegance and functionality. It features six candelabra bases and is compatible with LED bulbs for extended use. With a hanging height of 25.5 inches and a diameter of 49 inches, this chandelier is ideal for illuminating large spaces such as dining rooms, living rooms, or foyers. The detailed illustration in the manual provides clear instructions for assembly and installation, including suggestions for crystal placement for a visually appealing arrangement.
Advertisement
Advertisement
ASSEMBLY INSTRUCTION
MODEL #WIN-617-GA-CL-MWP
25.5"
You will need 6 -Candelabra Base Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
A=
B=
C=
D=
E=
F=
G=
H=
I=
J=
49"
DETAILED ILLUSTRATION
H
F
I
G
J
I
I
C
A
D
B
H
A
C
E
B
G
A
F
E
J
D
I
C
H
B
G
A
F
E
J
D
I
C
H
B
G
A
F
E
J
D
I
C
H
B
G
A
F
E
J
D
I
C
H
B
G
A
F
E
J
D
I
C
H G F
B
B
A
C
B C D E A B C D E A B C D E A B C D E A B C D E A B
D
E
C
A
F
H
G
I
I
J
F G H I J F G H I J F G H I J F G H I J F G H I J F G H I
SUGGESTED CRYSTAL PLACEMENT TOP VIEW
PLEASE REFERENCE CRYSTAL KEY
9"
1.Determine preferred hanging
height and adjust to the required
chain.
2.On both sides, feed wires through
the hanging stem and chain.
3.Attach the stem onto the fixture
body.
4.On each piece of chain, hang one
end at the loop on canopy and the
second end at the loop on the top
of stem.
5.Insert recommended bulb (not
included).
6.Dress the crystal strands as
illustrated.
Crystal Key
A.14 Sets.
(5)14mm + (4)20mm + (1)30mm
B.14 Sets.
(7)14mm + (5)20mm + (1)30mm
C.14 Sets.
(3)14mm + (6)20mm + (1)30mm
D.12 Sets.
(10)14mm + (4)20mm + (2)30mm
E.12 Sets.
(6)14mm + (4)20mm + (1)30mm
F.14 Sets.
(4)14mm + (2)20mm + (1)30mm
G.14 Sets.
(3)14mm + (3)20mm + (1)30mm
H.14 Sets.
(5)14mm + (4)20mm
I.16 Sets.
(3)14mm + (2)20mm + (1)30mm
J.12 Sets.
(5)14mm + (2)20mm + (1)30mm
A
B
C
D
E
F
PART NUMBER
MODEL #WIN-617-GA-CL-MWP
Plastic Anchor
Wood Screws
A. (1) - Mounting Hardware
include:
(1) - Mounting Plate
(4) - Machine Screw
(3) - Wire Connector
(2) - Plastic Anchor
(2) - Wood Screw
B. (1) - Canopy(L28",W4.5",H0.75") #XRE617GACAN28IN
C. (4) - Fixture Loop
D. (4) - Quick Link
E. (2) - Hanging Chain(each72",5.0mm) #XRE617GACHA5MM
F. (2) - Hanging Stem(6",12.7mm) #XRE617GASTEM6IN
For installation of mounting plate:
1.Please measure the distance between the two mounting keyholes on the mounting plate.
2.Make two points on the ceiling according to the distance measured above.
3.Drill two holes at the two points and insert the plastic anchors.
4.Put the mounting plate over outlet box and insert two wood screws in the plastic anchors and tighten
them.

Public link updated
The public link to your chat has been updated.
Advertisement