ASSEMBLY INSTRUCTIONS
LOFT BED
Thank you for purchasing this quality product.
Be sure to check all packing materials carefully
for small parts which may have come loose
inside the carton during shipment. Separate,
identify and count all parts and hardware.
Compare with the parts list to be sure all parts
are present.
“DO NOT TIGHTEN SCREWS
UNTIL COMPLETELY ASSEMBLED”
SIZE OF MATTRESS AND FOUNDATION (SUPPOR
This bed is designed to use a twin mattress (37/”-38/%”x74-75”) and bunkie board (37%%“x74”). The
total thickness must not exceed 8’ inchess. Do not use mattress without the proper bunkie board of safe
foundation.
Note: There must be at least 5” inches from top surface of mattress to top edge or guardrails.
AN
REPLACEMENT PARTS.
Replacement parts, including additional guardrails, may be obtained from place of purchase or original
distributor.
SAFETY WARNINGS!
1- Follow the informationon the warning label appearing on the upper bunk end structure and on the carton.
Do not remove warning label from bed.
2- Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of
entrapment or falls.
3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4- Do not allow children under 6 years of age to use the upper bunk.
5- Prohibit more than one person on upper bunk.
6- Periodically check and ensure tha the guardrail, ladder and other components are in their proper position
free from damage, and that all connectors are tight.
7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8- Always use the ladder for entering and leaving the upper bunk.
9- Do not use substitute parts. Contact distributor or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.
11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and the wall.
12- Always use guardrails on both long sides of the upper bunk.
13- The use of water or sleep flotation mattresses is prohibited.
14- Keep these instructions for future reference.
15- ion Hazard - Never attach or items to of the bunk bed that are not desi for
roe vith the bed: for example, bat not lintted to, books’ belt, and jump ropes, ear рес
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY
ASSEMBLY INSTRUCTIONS
LOFT BED
A
ZA TA
— IN
WH
(\ LE
Z
7
À
£
=
=
Thank you for purchasing this quality product. Be sure to check all packing
material carefully for small parts which may have come loose inside the
carton during shipment. Separate, identify and count all parts and hardware.
Compare with the parts list to be sure all parts are present.
"DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED"
| Tools Required
JC
(Not included)
(Not included)
IMPORTANT:
PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY
2
Detail View - LOFT BED
Identifying the Hardware -Indentify the hardware using the illustrations below.
3
Detail View - STAIRS
ВА А,
Part List—WE28 1646
1
13
Bed board - 10pc
99
Part List—WE28 1647
2 3
уси - 7 a >
Left front bed column- 1pc Left rear bed column - 1pc
4 5
Of 7 $ > > 7
Right rear bed column - 1pc
Back guard rail frame - 1pc
Front guard rail frame - 1pc
8 9
2 —_ 2 —_]…—— | Y 5%» /
Bed side plate - 1pc Bed side plate - 1pc
10 11
Left front guard rails support - 1pc Right front guard rails support - 1pc
15 16
Ç > © 7
Bed ladder column - 1pc
Bed ladder column - 1pc
17 18
6 N < >
Step of bed ladder - 3pc Slide column - 1pc
19 20
< |
Slide column - 1pc Slide support wood - 6pc
21 22
\ \
Slide baffle - 1pc Skate - 1pc
Part List—WF28 1648
23
7
Left Side panel- 1pc
24
7
Right Side panel- 1pc
25
\ A
Storage ladder bottom panel- 1pc
26
>
—
Storage ladder front panel- 1 pc
21 28
Storage ladder support - 2pcs Storage ladder support - 1 pc
29 30
Storage ladder support - 4pcs Storage ladder between panel - 1pc
31 32
Left Side panel- 1pc Right Side panel- 1pc
33 34
Left Side panel- 1pc
A
a
Right Side panel- 1pc
35 36 Su
N
Storage ladder top panel- 1pc Storage ladder top back panel - 1pc
37 NN 38
Storage ladder bottom back panel - 1pc Storage ladder door panels- 2pcs
39 40
a dd Vi
Storage ladder support- 1pc Storage ladder support - 1pc
41 42
Storage ladder support- 1pc Storage ladder support - 1pc
43 44
=="
Storage ladder supports - 3pcs
Storage ladder supports- 3pcs
Hardware List—WE28 1646
A
a A
813x1/4"x80mm
B
DADA
@13x1/4"x30mm
(o) ao
013x1/4"x30mm
Hex-Head bolts(23pcs)
Hex-Head bolts(4pcs)
Hex-Head screw(40pcs)
D
>
@13x1/4"x50mm
E
0) mms
@13*1/4"x8Omm
F
@10x13mm
Hex-Head screw(28pcs)
Hex-Head screw(16pcs)
Horizontal-Hole bolts (23pcs)
G
= ED )))
@6x35mm
H
Th)
@14.5x12mm
I
(yD
088x04x30mm
Three in one bolts(26pcs)
Three in one lock(26pcs)
Round head screw(20pcs)
J ©
or
K
L ge
CS
075x23x24mm 67х63.5х18 тт 20x20x19mm
Stair hook(4pcs) Flat head screw(12pcs) L-Bracket (2pc)
M N O
Q
q =>
50x31x2mm 07x03.5x15mm =
Connecting iron sheet(2pcs)| Flat head screw( 12pcs) Door magnet(2pcs)
P Q R
i =>
@6x93x12mm
Round head screw(4pcs)
Magnetic iron sheet(2pcs)
Flat head screw(10pcs)
S T U
L= WLLL VID
4mm 810x40mm 28x30mm
Allen key(1pcs) Wood dowel(47pcs) Wood dowel(22pcs)
ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )
=>
10
N
O
A
00
= ^
_ Vf
Fi:
[2 №
oF
LL
|,
O
[2 №
LO
«”
STEP
11
STE
P:
:2
nn D
DM
(> F
Do) T
2
WA
2
8P
CS
4
PCS
8P
CS
6P
CS
. we
12
07
2 PCS
cp
20PCS
E
>
4PCS
(on DD)
APCS
STEP
¿UA
Ze
№
=)
A
a
№
A
A
O
N
\
13
K J D T
STEP: 5 [К >
Ц 9) | 07
4PCS 2PCS 6PCS 6PCS
AT
STEP: 6 K > D у
14
Dm
2PCS
1PC
Dm
APCS
STEP
DYNA
; /
Zo
eo a
15
STEP: 8
1 PCS 9PCS 9PCS
o> 95%
\
16
3 PCS
1 PCS
ОЙ
4 PCS
STEP: 9
NA
XA
STEP: 10
17
4PCS
10 PCS
6 PCS
: 11
STEP
: 12
STEP
6 PCS
: 13
STEP
18
G U
STEP: 14
DB | ZA
6PCS 4 PCS
STEP: 15 С U
WA)
4 PCS
H
STEP: 16
19
one
5 PCS
PC
1
6 PCS
2 PCS
:17
STEP
20
U G
STEP: 18
YD ол
4 PCS 4 РСЗ
С U
STEP: 19
WLLL)
4PCS
21
ee
4PCS
ISA)
ES
1
22
one
5 PCS
PC
1
4 PCS
2 PCS
23
STEP: 22
24
C U
YD
STEP: 23 L
2 PCS
25
>
8 PCS
2 PCS
A)
26
STEP: 25 N - D
- ne BS
27
STEP:26
SIT
28
">
