1005350172/312727388/23WM90535-PC78

1005207007/312727390/23WM90535-PB01

1005210977/312727262/23WM90535-PT01

USE AND CARE GUIDE

WHEATON ELECTRIC FIREPLACE

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

THANK YOU

We appreciate the trust and confidence you have placed in StyleWell through the purchase of this Electric Fireplace. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing StyleWell!

Table of Contents

Maximum Load Warning ...........................................2

Safety Information .....................................................3

Warranty .....................................................................5

Pre-Assembly .............................................................6

Hardware Included ................................................... 6

Product Specifications .......................................................

6

Tools Required ...................................................................

6

Package Contents ..............................................................

7

Assembly ....................................................................8

Operation .................................................................14

FCC/IC Information .........................................................

17

Care & Cleaning .......................................................17

Troubleshooting .......................................................18

Replacement Parts ..................................................20

Maximum Load Warning

MAXIMUM LOAD 20 lb. (9.1 kg)

CAUTION: This unit is intended for use only with the products and maximum weights indicated. Use with other products or products heavier than the maximum weights indicated may result in instability causing possible injury.

2

Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday,

9 a.m. - 6 p.m., EST, Saturday.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following:

1. Read all instructions before using this appliance.

2. If possible, always unplug this appliance when not in use.

3. Only a qualified service person should repair this product.

4. Do not use outdoors.

5. Do not cover the cord under the carpeting. Do not cover

with throw rugs, runners or the like. Arrange the cord away

from traffic areas and where it will not be tripped over.

6. To disconnect this appliance, turn the controls to the off

position, and then remove the plug from the outlet.

7. Connect to properly grounded outlets only.

8. This appliance, when installed, must be electrically

grounded in accordance with local codes or, in the

absence of local codes, with the current CSA C22.1

Canadian Electrical Code. For U.S.A. installations, follow

local codes and the National Electrical Code, ANSI/NFPA

NO.70.

9. This appliance has hot and arcing or sparking parts inside.

Do not use it in areas where gasoline, paint or flammable

liquids are used or stored. This fireplace should not be

used as a drying rack for clothing. Do not hang Christmas

stockings or other decorations on or near this product.

10. There is a thermostat limiter inside the heater. When inner

temperature overheating or abnormal heating occurs, the

thermostat protective device will cut off the power supply

to avoid damage to the fireplace or risk of fire.

DANGER: High temperatures may be generated under certain abnormal conditions. Do not partially or fully cover or obstruct the front of this heater.

WARNING: In order to avoid overheating, do not cover the heater.

WARNING: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

WARNING: Under no circumstances should this fireplace be modified. Parts that must be removed for servicing must be replaced prior to operating this fireplace again.

WARNING: This heater may include a visual alarm to warn that parts of the heater are getting excessively hot. If the alarm illuminates, immediately turn the heater off and inspect for any objects on or adjacent to the heater that may have blocked the airflow or otherwise caused high temperatures to have occurred.

DO NOT OPERATE THE HEATER WITH THE ALARM ILLUMINATING.

WARNING: This appliance is not a toy. Supervise children playing near it.

WARNING: Use extreme caution when operating heater near children and the disabled.

WARNING: This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate this appliance where it may fall into a bathtub or other water container.

WARNING: Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the appliance.

WARNING: To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where the opening may become blocked.

WARNING: Use this appliance only as described in the manual.

Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.

WARNING: This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored. This fireplace should not be used as a drying rack for clothing. Do not hang Christmas stockings or other decorations on or near this product.

CAUTION: Never leave the heater operating unattended.

Extreme caution is necessary if unsupervised children or invalids are nearby.

CAUTION: Before assembly, carefully use scissors or a utility knife to cut and unwrap all parts. Make sure you do not discard the hardware.

3

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Safety Information (continued)

NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts.

• Do not sit on any part of the mantel.

• It is recommended to work on a soft surface like a rug or to

lay out a blanket to protect the furniture from getting scratched

during the assembly process.

NOTE: To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during unpacking and assembly. The cord must remain unplugged whenever you are adjusting/assembling the fireplace.

If any part is missing or damaged, do not attempt to use or plug in the power cord until the missing or damaged part is correctly replaced. To avoid electric shock, use only identical replacement parts when servicing double-insulated tools.

NOTE:

SAVE THESE

INSTRUCTIONS

4

1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations.

1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.

2. This warranty is non-transferable, and is made to the original owner, provided that the purchase was made through an authorized supplier of the product.

3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that such part(s) have been subjected to normal conditions of use and service, after said defect is confirmed by the manufacturer’s inspection.

4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part(s).

5. Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair, replacement, or otherwise of same, will not be covered by this warranty, nor shall the manufacturer assume responsibility for same.

6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or damage arising out of the use, or inability to use the product, except as provided by law.

7. All other warranties – expressed or implied – with respect to the product, its components and accessories, or any obligations/liabilities on the part of the manufacturer are hereby expressly excluded.

8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with respect to the sale of the product.

9. The warranties as outlined within this document do not apply to non-accessories used in conjunction with the installation of this product.

10. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

This warranty is void if: a. The fireplace is subjected to prolonged periods of dampness or condensation.

b. There is any unauthorized alteration, willful abuse, accident, or misuse of the product.

c. You do not have the original receipt of purchase.

5

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Pre-Assembly

HARDWARE INCLUDED

AA

Part

EE

FF

GG

HH

AA

BB

CC

DD

BB CC

Description

Cam Lock Screw

Cam Lock Connector

Wood Dowel

Screw- 3.5 x 12 mm

Screw- 3 x 12 mm

Tipping Restraint Hardware

Floor Glide (Pre-attached)

Metal Plate (Pre-attached)

DD EE FF GG HH

Part Number

PH-KDBZNC001

PH-KDCZNC001

PH-DWLNTL001

PH-SCRBLK013

PH-SCRBLK007

PH-BKTWHT003

PH_GLDBRW001

PH-PLTBLK001

Quantity

4

4

4

1

25

25

22

4

NOTE: Hardware not shown to actual size.

PRODUCT SPECIFICATIONS

VOLTAGE

AMPS

WATTS

120VAC, 60 Hz

12.5 Amps

1500 Watts

PLANNING ASSEMBLY

Before beginning assembly of product, make sure all parts are present. Compare parts with Hardware Included and Package Contents lists.

If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.

Estimated Assembly Time: 90 Minutes

TOOLS REQUIRED

Phillips Screwdriver

6

Pre-Assembly (continued)

PACKAGE CONTENTS

G

F

B

D

E

F

G

C

D

H

I

Part

A

B

Description

Bottom Shelf

Left Side Panel

Right Side Panel

Left Surround Panel

Right Surround Panel

Top Surround Panel

Top Panel

Base Front Rail

Fireplace Insert

A

H

E

C

I

NOTE: All panels are labeled left and right as viewed from the front of unit.

Quantity

1

1

1

1

1

1

1

1

1

7

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly

1

Preparing the sides for assembly

Locate the Left Side Panel (B) and the Right Side Panel (C).

Insert the Wood Dowels (CC) into the pre-drilled holes on the edges of the Left and Right Side Panels (B, C).

Insert the Cam Lock Screws (AA) into the pre-drilled holes on Left and Right Side Panels (B, C) where indicated.

Tighten using a Phillips screwdriver.

CC

B

AA

C

2

Preparing the bottom shelf for assembly

Locate the Bottom Shelf (A).

Insert the Wood Dowels (CC) into the pre-drilled holes on the edges of the Bottom Shelf (A).

CC

A

3

Attaching the sides

Align the previously installed cam lock screws from step 1 on the Left and Right Side Panels (B, C) with the pre-drilled holes on the Bottom Shelf (A) as shown in the diagram.

Place Cam Lock Connectors (BB) into the pre-drilled holes and tighten with a Phillips screwdriver.

B

BB

A

C

8

Assembly (continued)

4

Preparing the side surround panels

Locate the Left Surround Panel (D) and Right Surround

Panel (E) and place on a flat surface.

Insert Cam Lock Screws (AA) into the pre-drilled holes in each panel and tighten with a Phillips screwdriver.

AA

D E

5

Preparing the top surround panel

Locate the Top Surround Panel (F).

Insert the Wood Dowels (CC) into the pre-drilled holes on the edges of the Top Surround Panel (F).

F

CC

6

Assembling the surround panels

Align pre-drilled holes at the top edges of Left and Right

Surround Panels (D, E) with the previously installed wood dowels on the Top Surround Panel (F). Push together.

Locate the pre-attached metal brackets found on the Top

Surround Panel (F) and rotate to span across the edges of each panel (D, E).

Secure each bracket across each joint with a Screw (EE) and Phillips screwdriver.

EE

9

F

D

E

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

7

Preparing base for assembly

Locate the Base Front Rail (H).

Place the Base Front Rail (H) on a flat surface and insert

Cam Lock Screws (AA) as shown.

H

8

Attaching the base to the surround

Align the pre-drilled holes of the assembled surround panels from step 6 (D, E, F) with the cam lock screws on the edge of the Base Front Rail (H).

Secure the Base Front Rail (H) to the surround panel assembly (D, E, F) with the Cam Lock Connectors

(BB). Tighten with a Phillips screwdriver.

E

F

D

BB

H

BB 9

Attaching the front and sides

Attach the front assembly to the sides by aligning the previously installed cam lock screws with the pre-drilled holes on each side panel.

Secure together using Cam Lock Connectors (BB).

AA

10

Assembly (continued)

10

Preparing the top assembly

Locate the Top Panel (G) and place onto a flat surface.

Insert the Cam Lock Screws (AA) into the pre-drilled holes in the bottom of the Top Panel (G). Tighten the Cam Lock

Screws (AA) using a Phillips Screwdriver.

AA

G

11

Attaching the top

Place the Top Panel (G) onto the main assembly by aligning the previously installed cam lock screws and wood dowels with the pre-drilled holes.

From underneath the Top Panel (G), secure the cam lock screws by inserting Cam Lock Connectors (BB) into the pre-drilled holes. Tighten using a Phillips Screwdriver.

BB

G

11

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

12

Installing the fireplace insert

Lift the Fireplace Insert (I) carefully into the back of the unit and center in the fireplace insert opening.

Do not drag the fireplace insert across the base as it may scratch your unit.

13

Securing the fireplace insert

Use Screws (DD) to secure each side of the Fireplace Insert (I) firmly in place.

I

I

DD

12

Assembly (continued)

14

Installing the tipping restraint hardware

When the Tipping Restraint Hardware (FF) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or climbing.

Each Tipping Restraint Hardware (FF) includes one Unit

Anchor, one Wall Anchor, one Anchor Tether, and four

Anchor Screws. Use these to complete the following steps for a proper installation.

Locate a secure wall stud behind the unit closest to left side.

Align the Unit Anchor with a wall stud and attach with two Anchor Screws using a Philips Screwdriver. The

Anchor Screws must pass through the Top Assembly (G) for proper installation.

Align the Wall Anchor in the center of the wall stud, at level with the Unit Anchor, and attach with two Anchor

Screws using a Philips Screwdriver.

On the Anchor Tether, detach the cable from the connector and loop the loose cable through the eyelets on the Wall Anchor and Unit Anchor. Reattach the loose cable to the connector, but do not tighten.

Locate a secure wall stud behind the unit closest to the right side, and repeat the steps above.

Tighten both Anchor Tethers by pulling the cable the through connector.

NOTE: Installation of the Tipping Restraint Hardware (FF) will provide a small space between the wall and the unit.

WARNING: Installing the Tipping Restraint

Hardware will help prevent accidents or damage to the unit.

G

FF

13

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

NOTE: The control panel can be accessed at the upper-right corner of the insert.

1

Powering the fireplace

Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode.

Push the Power button again to turn off all functions.

NOTE: All previous settings are held in memory, so the next time you power up the fireplace, the unit will turn on with the same settings.

NOTE: Holding the Power button on the control panel for

10 seconds will disable the heater function.

2

Adjusting the flame

There are 5 brightness levels that can be selected and OFF

(00) setting. Settings F5 - F1 decrease in brightness.

3

Adjusting the heater

Press the heater button on the control panel to turn on/off

(00) and adjust the heater setting.

The “+ / - ” buttons on the remote will increase / decrease temperature setting.

The thermostat setting range is 62°F - 82°F ( 17°C - 27°C) or continuously ON.

The thermostat is adjustable by 2°F or 1°C increments.

To change between °F and °C, press and hold the HEATER button on the control panel for 3 seconds.

4

Setting the timer

Pressing the Timer button will cycle through the timer settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, and off (00).

NOTE: To change between °F and °C press and hold the

HEATER button on the control panel for 3 seconds.

5

Adjusting the flame speed

Each flame color option has speed options available.

Setting S1 is slowest ranging up to setting S5 which is the fastest.

/

14

Operation (continued)

6

Replacing the remote control battery

When the remote control stops operating or its range seems reduced, it is time to replace the batteries with new ones.

On the back end of the remote, press and slide

the battery door open and remove the old battery.

Insert 2 AAA batteries, checking that the + and -

sides of the battery match inside the battery

compartment.

Replace the battery compartment door.

7

Disposing of used batteries

The battery may contain hazardous substances that could endanger the environment and human health.

This symbol marked on the battery and/or packaging indicates that used battery should not be treated as municipal waste. Instead it shall be left at the appropriate collection point for recycling.

By correctly disposing used batteries, you prevent potential negative consequences for the environment and human health. Recycling used materials also conserves natural resources.

NOTE: Do not mix old and new batteries. Do not mix alkaline, standard (carbonzinc), or rechargeable (nicad, nimh, etc) batteries. Do not ingest batteries.

For more information about collecting and recycling used batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased this product.

NOTE: Please operate the remote control at a slow measured pace. Press the remote control buttons with an even motion and gentle pressure. Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction.

NOTE: Batteries should be removed if the product is to be left unused for a long time.

15

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Operation (continued)

8

Power cord information

This heater is for use on 120 volts. The cord has a plug as shown in the figure.

Connect to properly grounded outlets only.

Do not use a 2 prong adapter. Never use with an extension cord or relocatable power tap (outlet/ power strip).

9

Patented Safer Plug ® information

This product is equipped with a Safer Plug ® , which is an advanced safety device that helps prevent electrical fires caused from faulty outlets.

Overloading of outlets, adapters and surge protectors may cause overheating, damage, and increased risk of fires. The Safer Plug continuously monitors the temperature in the plug and outlet and will turn off the heater to prevent unsafe outlet overheating.

If the Safer Plug cuts the power due to unsafe conditions it will show an

“ Er ” message on the screen. If this occurs the Safer Plug has prevented a potentially unsafe condition.

To reset the device if this occurs, first allow the plug to cool down. Once the plug has cooled down, unplug the device and wait 5 seconds, then plug back in and continue to use normally.

If the Safer Plug continues to activate, your outlet may be faulty. Check your heater cord and plug connections. Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat. Be sure the plug fits tight in the outlet. Heaters draw more current than small appliances.

Overheating of the outlet may occur even if it has not occurred with the use of other appliances. During use check frequently to determine if your plug outlet or faceplate is HOT! If so, discontinue use of the heater and have a qualified electrician check and/or replace the faulty outlet(s).

SAFER PLUG

16

FCC/IC Information

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Care and Cleaning

Dust your fireplace regularly with a soft non-lint-producing cloth or household dusting product.

Clean your fireplace with a gentle non-abrasive household cleaner. Dry your fireplace immediately with a soft cloth or towel.

The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no further

lubrication. However, we recommend periodic cleaning/vacuuming of the fan/heater.

Make sure the unit is turned OFF and unplugged whenever you are cleaning the heater or fireplace.

WARNING: Make sure the power is turned off before proceeding with repairs. Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes. If repairing or replacing any electrical component or wiring, the original wire routing, color coding and securing locations must be followed. During any service of this appliance, the power to the unit must be turned off. First turn the main power switch to the OFF position. Then remove the electrical plug from the wall outlet.

WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electrical shock and injury to persons.

WARNING: Do not use this fireplace if any part of it has been under water. Immediately call a qualified service technician to inspect the fireplace and replace any part of the electrical system.

WARNING: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical shock or personal injury.

17

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Troubleshooting

PROBLEM ROOT CAUSE CORRECTIVE ACTION

Fireplace stopped heating before reaching the desired temperature.

Fireplace has reached set temperature.

Temperature around fireplace might be a few degrees higher than other area in the room.

Set Fireplace to a higher temperature or always “on”.

Display shows "

Display shows " "

Display shows " "

Display shows " "

There is no power and the logs do not glow.

"

Heater does not blow warm air.

The thermostat sensor is broken or disconnected.

The thermostat sensor short circuited.

Manual Reset overheat protection has triggered.

Power cord overheating protection has activated.

The heater is in a cool down cycle.

There is no power to the unit.

Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board. If this does not solve the problem contact customer service for a replacement thermostat sensor.

Contact customer service for a replacement thermostat sensor.

Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating. Unplug the heater for 30 minutes and allow it to cool down. Replug and operate.

Monitor the heater for signs of overheating.

If the problem persists discontinue use of the heater and contact customer service.

Check your heater cord and plug connections.

Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat. Be sure the plug fits tight in the outlet. Heaters draw more current than small appliances.

Overheating of the outlet may occur even if it has not occurred with the use of other appliances. During use check frequently to determine if your plug outlet or faceplate is HOT! If so, discontinue use of the heater and have a qualified electrician check and/or replace the faulty outlet(s).

Normal operation will continue to run for about

15 seconds before shutting down. Times will vary based on temperatures.

During this time cool air will blow.

Check that the unit is plugged into a standard 120V outlet. Press the Power button several times and make sure power is set to the “ON”position.

The logs are not glowing, and there is no flame effect.

The flame effect turned off.

Press the Flame button several times.

18

Troubleshooting (continued)

PROBLEM ROOT CAUSE

Flame effect works but heater function does not and the emberbed flashes when the Heater button is pressed.

The heater is disabled.

There are no batteries.

The remote control is not working.

The signal is poor.

The remote is too far from the heater.

CORRECTIVE ACTION

With the power on press and hold the POWER button on the control panel for 10 seconds.

Once re-enabled the emberbed lights will flash multiple times.

Change the remote batteries.

Operate remote transmitter at a slow measured pace.

Press the remote control buttons with an even motion and gentle pressure. Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction.

Operate the remote at a distance less than

20 ft from the front of the appliance; point the remote at the control panel.

19

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Replacement Parts

For replacement parts, call our customer service department at 1-800-998-7021, 8 a.m.-7 p.m., EST, Monday-Friday,

9 a.m. - 6 p.m., EST, Saturday.

Part

7

8

5

6

9

3

4

1

2

Description

Flame Circuit Board

Flame Generator Driver Mode

Emberbed with Log Set

Control Panel Circuit Board

Main Circuit Board

Thermostat Sensor

Blower / Heater Assembly

Front Glass Assembly

Remote Control

Qty.

1

1

1

1

1

1

1

1

1

7

4

1 2

5 6

3

8 9

20

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Notes

21

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Notes

22

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Notes

23

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

Retain this manual for future use.