ASSEMBLY INSTRUCTION
SKU CODE: (WF196800-WF196801-WF196802)
This set is included 3 boxes if don't receive full 3
boxes please contact our customer service team
SAFETY WARNINGS
1. Follow the information on the warning label appearing on the upper bunk end structure
and on the carton... Do not remove warning label from bed.
2. Alway use the recommended size mattress or mattress support, or both, to help prevent
the likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches below the upper edge of guard rails.
4. Do not allow children under 6 years to use the upper bunk.
5 Prohibit more than one person on upper bunk.
6 Periodically check and ensure that the guardrail, ladder, and other components are in
their proper position, free from damage, and that all connectors are tight.
Г. Do not allow horseplay оп ог under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving upper bunk.
9. Do not use substitute part. Contact the manufacturer or dealer for replacement part.
10. Use of night light may provide added safety precaution for a child using the upper bunk.
11 If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and the wall.
12. Always use guardrail on both long sides of the upper bunk.
13. The use of water or sleep flotation mattresses is prohibited.
14. Keep these instruction for future reference.
15. Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed, for example, but not limited to hooks, belts and jump rores.
16. Trundle : Only use for mattress 6 inch.
PLEASE DO NOT RETURN PRODUCT TO THE STORE
it you have any problem or concerns, please feel free to contact our customer
service department. We will reply you as soon as possible.
oy E-Mail: [email protected]
01/30 5% Tel: 626-912-8886 Ext.100
ASSEMBLY INSTRUCTION
02/30
OPTION 1
03/30
Twin Loft
(From Step 14 to Step 18)
Twin Daybed
(From Step 1 to Step 13)
OPTION 2
in Loft va King Daybed
$
D
Ф
O
>
©
O
O)
=
Sy 9
=
2
OPTION 3
TWIN / TWIN
©
—, C9
x D
N ©
о.
®
«ld
N
Ó
ne
2 N
©.
© = \
D Г © 7
Y) NY yA
=
Ó
u
DAA
\/ / V Y 2
У ААА NY
AN A KW
= W y N \ , N
\ ON \
( Q \\ NS A NO
\ / A Ÿ N \\ | N y
\ \ \) Ñ
\ ) NN \ ‹ NS
CLELE 5 IIA ANR \
o o o/) д o/
TK
N \
\
\
OPTION 4
TWIN / KING
(From Step 1 to Step 23)
INS
06/30
Part List(wr196800)
A1 If
Bottom Leg(Left-Front)-1 pcs
Al Е
Bottom Leg(Left-Back)-1 pcs
Bottom Leg(Right-Front)-1 pcs
A4 if
Bottom Leg(Right-Back)-1 pcs
A5 |
Upper Legs-2pcs
AG A
Upper Legs-2pcs
Slats(Trundle)-10pcs
Е B2 _ B3
Woodbars-5pcs Woodbars-4pcs Panels-2pcs
BA BS D2
Woodbars-2pcs Woodbar-1pcs Slats(Bottom)-9pcs
ID3 E1
Side Ladder-1pcs
IE2
h
à
Side Ladder-1pcs
LS
5
ID
Drawer-Bottom panels -2pcs
07/30
Slats(Upper)-10pcs
G
Step Ladder -4pcs
SS
Part List(WF196801)
B6 B7 8 B8 к
Woodbars-4pcs Woodbar-1pcs Woodbar-1pcs
IC 1 C2 C3 >
Guardrails - 4pcs Side Rails (Upper) 2pcs N | Rails-2pcs
ID 1 E3 F2
Drawer-Back panels -2pcs
08/30
Part List(wF196802)
©
Nr
Trundle-Back WoodBar -3pcs
Drawer-Front panels -2pcs
IC4 CD
Guardrails - 2pcs Side Rail (Bottom-Back) -1pcs $S | Side Кай (Bottom-Front) -1pcs
IH8 ? FIN F3
4
Drawer-Side panels -2pcs
Drawer-Side panels -2pcs
F6
Dr-Support Bottom panels -4pcs
=
Trundle-Front Panel -1pcs
Trundle-Back Panel -1pcs
H3
Trundle-Back Panel -1pcs
A
Trundle-Side Panel -1pcs
Trundle-Side Panel -1pcs
H6
Trundle-Center Panel -1pcs
>
Trundle-Center Woodbar -1pcs
09/30
Hardware List
1 2 - 3
(о) оу SD A
Screws 1/4" x80 G10 x 40 mm 01/4" x 80 mm
28pcs Wood dowel 40pcs Hex-Head bolts 32pcs
4 5 6
Y С
y”
01/4" x 13 mm M4 x 20 mm
Horizontal-Hole bolts 36pcs Wood Screws 16pcs Wheels 4pcs
| | A | A
8 x 30 mm 01/4" x 70 mm (D1/4" x 30 mm
Wood dowel 6pcs Hex-Head bolts 8pcs Hex-Head bolts 14pcs
10 11 Ze 12
M4 x 30 mm 01/4" x 25 mm
Wood Screws 82pcs Allen Key 1pc Hex-Head bolts 6pcs
13 14 15
Ö (0) — ww
01/4" x 15 mm Screws 1/4" x50 012 x 110 mm
Canopy head though -6pcs 8pcs Wood dowel 4pcs
De
Assembly Tools Required (Not Included)
10/30
ST E P 1 « Following below illustration Assembly Bottom bed's Headboard and Footboard. Using hardware #1 connect A1 1
and A2 legs with B1(2),B2(2) WoodBar and B3 Panel to complete LEFT side of Bottom Bed. Using hardware #1 connect A3 and A4 legs
with B4(2),B2(2) WoodBar and B3 Panel to complete RIGHT side of Bottom Bed.
LE <>
> 8x2pcs
0d.
AY
2
LEFT Le
И.
| Y
„№
| 63
9
o
о <=>
(A) ai
0
Qe (AS >
0
RIGHT
A
| 11/30
ST E P 2 = Following below illustration Using hardward #3, #4 and dowel #2
follow detail view to Assembly Bottom bed's Headboard and Footboard with siderail
C4(2),C5.Look at detail view for more detail
AAA
12/30
ST E P 3 = Following below illustration:
-Using hardward #5,#6 to connect With Trundle Side Panel H4,H5
ST E P 4 Following below illustration: 4
-Assembly Trundle Frame(H3,H4,H5,H6,H7)
13/30
STEP 5: S Пр
-Assembly Front Trundle with Oy G
Frame(completed on step 4)
4pcs 4pcs
9
y
1рс$
ST E P 6 = Following below illustration Using hardward #9 to assembly Frame(completed on step 5) with H2(1),H8(3) Woodbar
14/30
20(pcs)
в в O = =
15/30
A YY YS OM
N)
ST E P 8 „ Following below illustration:
-Push Trundle in to under Bed
ISS
N
47130
Inside Side Rail View
ST E P 9 = Following below illustration Using hardward #3,#4 and dowel #2
A A A OA
N)
follow detail view to Assembly Bottom bed's Headboard and Footboard with siderail
C6.Look at detail view for more detail
22(pcs)
Screw 9 slats D2 and 2 Slats D4 with Siderail C5,C6 by using hardward #10.
Following below illustration:
-Look at detail view for more detail
STEP 10:
18/30
4x2(pcs)
STEP 11-1:
ASSEMBLY DRAWERS
a”
N
Pr N
Pr
STEP 11-1:
ASSEMBLY DRAWERS
STEP 11-1:
ASSEMBLY DRAWERS
19/30
20/30
AN
RAN
ANN
‘ N
) A №
ST E P 1 2 „ Following below illustration:
-Push 2 Drawers in to Under Bed
yn A A A
Var
>
©
O
O)
=
X
®
Y)
=)
u
ul)
с
(qe)
>
=)
O
>
=
A
со
vn
OL
LL]
E
ST E P 1 4 = Following below illustration Assembly Upper bed's Headboard and Footboard. Using hardware #1 connect A5
and A6 legs with B1(3) WoodBar to complete LEFT side of Bottom Bed. Using hardware #1,#9 connect A5 and A6 legs with
B6(4),B5,B7,B8 WoodBar to complete RIGHT side of Bottom Bed.
=?
ecu.
ES
RIGHT
22/30
ST E P 1 5 = Following below illustration Using hardward #3, #4 and dowel #2
follow detail view to Assembly Upper bed's Headboard and Footboard with siderail
C2(2) and Guardrails C1(4) .Look at detail view for more detail
AAA
\
Ve
=
=
~
~
~
~
<.
~
~
~
~
=
=
SL
\ SL
\ =
~
~
~
~
<.
~
~
~
~
~
=
=
~
~
SL
~
|
..
-
„7
e
RU
| a a,
awa “oe
ра ~
= LS
= ~~
i
~
``
=
>
~~
~d
23/30
STE P 1 6 = Following below illustration Using hardward #12,#13 connect Frame(completed on Step 15) with Rail 1 2
C3(2).Look at detail view for more detail T
1
i
]
|
]
5
ZA
©
_
Inside Side Rail View
24/30
ST E P 1 [ . Following below illustration:
-Screw 10 slats D1 with Siderails C2(2) by using hardward #10.
-Look at detail view for more detail
25/30
ISS
12pcs
14
NN
6pcs
4.
A
Y
~.
~.
MAL
A
T
~.
LS
LS
—
1
чу
“AL
11e
\
x |
LS |
Xy, El
<=
Sy
STEP 18: ASEMBLY LADDER
SN
9
| =
STE P 1 9 = Following below illustration:
‘Using hardward #9 conne
ct Frame(completed on Step 18) with
Frame(completed on Step 17)
Twin Loft
26/30
15
STD
4(pcs)
Following below illustration. Lay the Upper Bed (Completed on step 20) on Bottom Bed (Completed on step
STEP 21:
ct head of Bottom Bed legs with end of Upper Bed legs. Then use Screw #5 to pernament fix Upper and
12). Using the Dowel #15 to conne
Bottom Bed
28/30
ST E P 22 . Remove LadderThen Assembly E3(1)
.Look at detail view for more detail
N Remove this Part
EL 2
2рс$ 4pcs
G
/
29/30
‘OPTION 3
TWIN / TWIN
30/30
ST E P 2 3 „ Following below illustration:
-Using hardward #9 connect Frame(completed on Step 21) wi
OPTION 4
TWIN / KING
">
