Husky H4810 6 in. High Speed Sander Installation Guide
Advertisement
Advertisement
Installation
1
Cleaning the air hose
□ A 3/8" air hose is required, with a maximum length of 25 ft .
□ Clean the air hose of accumulated dust and moisture before connecting it to the air supply .
NOTE: If a longer air hose is required, connect a 1/2" air hose to the 3/8" air hose to ensure the sander has the necessary air supply .
2
Connecting to the air supply
□ Always use clean dry air . Excessive moisture and dirt will greatly reduce the life of any air motor . We recommend the installation of an in-line filter-regulator-lubricator as close to the tool as possible .
□ Ensure all hoses and fittings are the correct size and secured tightly .
Recommended Air Line Set-Up
Part Description
A
B
High Speed Sander
Quick Plug
E
F
C
D
G
H
Quick Coupler
Air Hose
In-line Regulator
In-line Lubricator
In-line Filter
Air Compressor
5 HUSKYTOOLS .COM
Please contact 1-888-43-HUSKY for further assistance .

Public link updated
The public link to your chat has been updated.
Advertisement