Datasheet - Motion Control Products

Datasheet - Motion Control Products
Lexium 32
motion control
Catalogue
October
2011
Schneider’s UK Distributor for Motion Control Section
All technical information about products listed in
this catalogue are now available on:
www.schneider-electric.com
Browse the “product data sheet” to check out :
characteristics,
dimensions,
curves, ...
and also the links to the user guides and
the CAD files.
1 From the home page, type the model number* into the
“Search” box.
* type the model
number without any
blank, replace “ ”
by “ ”
p
*
2 Under ”All” tab, click the model number that interests you.
3 The product data sheet displays.
Example : Zelio Time
data sheet
Discover this product
Characteritics
Functions
Connection
Dimensions
Download &
Documents
Other products
Help me to choose
Accessories
Plug
Sockets
p
p
p
p
p
p
p
p
Example : Zelio Time
data sheet
78
80
22,5
89,5
82
Example : Zelio Time
data sheet
U
U
C
C
G
G
R
R
t1
t2
t'1
t'2
t1
t2
t'1
t'2
You can get this information in one single pdf file.
1
2
3
4
5
6
7
8
10
2
Contents
0
Lexium 32
motion control
Lexium 32 offer
b
b
Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
1
Servo motor/servo drive combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
Lexium 32 servo drives
b
References
v
v
v
v
v
b
b
Configuration tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
Connection accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20
3
Options
v
v
v
v
v
b
2
Accessory and documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Dialogue tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 17
Communication buses and networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22
v
b
Servo drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Encoder cards for Lexium 32M servo drives . . . . . . . . . . . . . . . . . . . . . . page 28
Safety card for Lexium 32M servo drives . . . . . . . . . . . . . . . . . . . . . . . . page 30
Input/output extension card for Lexium 32M servo drives . . . . . . . . . . . . page 31
Braking resistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 32
Line chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 33
Integrated and additional EMC input filters . . . . . . . . . . . . . . . . . . . . . . . page 34
4
SoMove setup software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 36
Motor starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 40
5
BMH servo motors
b
b
b
Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 42
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 44
6
Options
v
v
v
v
Integrated holding brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 48
Integrated encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 49
GBX planetary gearboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 51
GBY angular planetary gearboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 52
7
BSH servo motors
b
b
b
Presentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 54
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 56
8
Options
v
v
v
v
Integrated holding brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 60
Integrated encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 61
GBX planetary gearboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 63
GBY angular planetary gearboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 64
10
3
Lexium 32 motion control
PF080934
Presentation
Presentation
The Lexium 32 range of servo drives includes three servo drive models associated
with two servo motor ranges for optimum use which can adapt to demands for high
performance, power and simplicity of use in motion control applications.
It covers power ratings between 0.15 and 7 kW.
The Lexium 32 servo drive offer is designed to simplify the life cycle of machines.
The SoMove setup software, SoMove Mobile software, side-by-side mounting and
colour-coded plug-in connectors, easily accessible on the front panel or on top of the
servo drives, all make installation, setup and maintenance easier. Maintenance is
also quicker and cheaper thanks to the new duplication and backup tools, such as
the memory card.
Performance is improved by optimized motor control: reduction of vibration with
automatic parameter calculation, speed observer, additional band-stop filter. This
optimization increases machine productivity.
Lexium 32 servo drive controlling a packaging machine
The compact size of the servo drives and servo motors provides maximum power in
the minimum space, enabling the machine dimensions and costs to be reduced.
PF080932
Integrated communication or optional communication cards, depending on the
model, as well as standard encoders, enable adaptation to numerous types of
control system architecture for industry.
Integrated safety function and access to additional safety functions reduce design
times and make it easier to comply with safety standards.
Applications for industrial machines
The Lexium 32 servo drive incorporates functions which are suitable for the most
common applications, including:
Printing: cutting, machines with position control, etc.
Packaging and wrapping: cutting to length, rotary knife, bottling, capsuling,
labelling, etc.
Textiles: winding, spinning, weaving, embroidery, etc.
Handling: conveying, palletization, warehousing, pick and place, etc.
Transfer machines (gantry cranes, hoists), etc.
Clamping, “on the fly” cutting operations (flying shear, printing, marking), etc.
Material working.
b
b
b
b
b
b
b
The offer
Lexium 32 servo drive controlling an handling machine
The Lexium 32 range of servo drives covers motor power ratings between 0.15 kW
and 7 kW with three types of power supply:
110…120 V single-phase, 0.15 kW to 0.8 kW (LXM 32
M2)
200…240 V single-phase, 0.3 kW to 1.6 kW (LXM 32
M2)
208…480 V three-phase, 0.4 kW to 7 kW (LXM 32
N4)
b
p
p
p
p
b
p
p
p
p
b
p
p
p
p
PF080933
Compliance with international standards and certifications
The entire range conforms to international standards IEC/EN 61800-5-1,
IEC/EN 61800-3, is UL and CSA certified, and has been developed to meet the
requirements of directives regarding protection of the environment (RoHS) as well as
those of European Directives to obtain the
mark.
e
Compliance with electromagnetic compatibility (EMC) requirements
The integration of a category C3 EMC filter in Lexium 32 servo drives and
compliance with EMC simplify installation and make it very inexpensive to bring the
device into conformity to obtain the
mark.
e
Additional filters, available as an option, can be installed by the customer to reduce
the level of conducted and radiated emissions (see page 34). They also enable the
servo drive to be used with cable lengths of up to 100 metres, to meet the
requirements of applications in a wide variety of fields.
Lexium 32 servo drive controlling a material working machine
Accessories and options
External accessories and options such as braking resistors, line chokes, etc.
enhance this offer.
Servo drives:
page 14
Servo motors BMH:
page 42
4
Options:
page 28
Servo motors BSH:
page 54
Servo drive/motor
combinations: page 8
Presentation (continued)
Lexium 32 motion control
Simplicity, from installation to maintenance
1
Lexium 32C, 32A and 32M servo drives
Safety card
2
Encoder card
3
Communication card
4
I/O extension card
5
BMH servo motor
BSH servo motor
Human-Machine Interface The display can be used to control and configure the servo drive, display states and faults, access parameters
(HMI)
and modify them in manual mode using the navigation button.
Remote graphic display
terminal 1
The Lexium 32 servo drive can be connected to a remote display terminal, available as an option. This terminal
can be mounted on an enclosure door with IP 54 degree of protection.
It provides access to the same functions as the Human-Machine interface and some additional functions
(see page 17).
SoMove Mobile
software 2
The SoMove Mobile software converts any mobile phone into a remote graphic display terminal, offering an
identical Human-Machine Interface (see page 18).
SoMove setup
software 3
The SoMove setup software is used to configure and optimize control loops with the Oscilloscope function in
automatic mode or in manual mode, and also for maintenance of the Lexium 32 servo drive, like all other
Schneider Electric drives and starters.
It can be used with a Bluetooth® wireless connection (see page 18).
Multi-Loader tool 4
The Multi-Loader tool enables configurations to be copied from a PC or a servo drive and loaded onto another
servo drive.
The servo drives can be powered-down (see page 19).
Memory card 5
This stores all the servo drive parameters. When replacing a Lexium 32 servo drive, this function ensures
immediate startup since the programming time has been eliminated. Maintenance time is optimized, and costs
reduced (see page 19).
Auto-tuning
Adapted to each user, the three auto-tuning levels, automatic, semi-automatic and expert, allow your machine to
achieve a high level of performance, whatever the application.
Mounting and
maintenance
Several Lexium 32 servo drives can be mounted side by side to save space.
Connecting the servo drives is simplified by colour-coded plug-in connectors, which are easily accessed on the
front panel or on top of the drive.
Servo drives:
page 14
Options:
page 28
Servo motors BMH:
page 42
Servo motors BSH:
page 54
Servo drive/motor
combinations: page 8
5
Presentation (continued)
Lexium 32 motion control
High performance
CANopen
machine bus
The Lexium 32 servo drive offer increases machine performance due to the
following characteristics:
Overload capacity: the high peak current (up to 4 times the direct current)
increases the range of movement
Power density: the compact size of the servo drives offers maximum efficiency in
a small space
High bandwidth: better speed stability and faster acceleration improve the quality
of control
Motor control: reduction of vibration, speed observer and additional band-stop
filter enhance the quality of control
b
CANmotion
LMC058 motion controller
b
b
b
A design suitable for the various different control system
structures
Lexium integrated
drive
Its versatile specifications provide the Lexium 32 range of servo drives with excellent
flexibility for integration in different control system structures.
Lexium 32A
servo drives
Depending on the model, the Lexium 32 servo drive has logic or analog inputs and
outputs as standard, which can be configured to adapt better to applications.
It also has control interfaces for easy access to the various architecture levels:
It has a control interface for control via pulse train
It integrates a combined CANopen/CANmotion port for enhanced control system
performance
It can also be connected to the main industrial communication networks and
buses using various communication cards
The following protocols are available: PROFIBUS DP V1, DeviceNet, EtherNet/IP and
EtherCAT.
b
b
b
Lexium SD3 stepper
motor drive
Functions dedicated to safety
BMH
servo motor
BSH
servo motor
The Lexium 32 range of servo drives forms part of a control system's safety system
since it integrates the “Safe Torque Off” (STO) function, which prevents unintended
restarting of the servo motor.
This function complies with standard IEC/EN 61508 level SIL3 governing electrical
installations and the power drive systems standard IEC/EN 61800-1.
It simplifies the setup of installations which require a complex safety device, and
improves performance during maintenance operations by reducing the time required
and increasing safety.
An additional eSM module is available for accessing enhanced safety functions.
BMH and BSH servo motors: dynamics and power
Altivar 32 drive
BMH and BSH servo motors are synchronous three-phase motors.
They feature a SinCos Hiperface® encoder for sending data from the servo motor to
the servo drive automatically, and are available with or without a holding brake.
BMH servo motors
BMH servo motors are motors with medium inertia. They are perfectly adapted to
high-load applications and allow the movement to be adjusted in a more robust
manner.
This product offer covers a continuous stall torque range between 1.2 Nm and
84 Nm for nominal speeds between 1200 and 5000 rpm.
Lexium 32M
servo drive
Example of control system architecture with
CANopen and CANmotion machine bus
BSH servo motors
BSH servo motors satisfy requirements for precision and high dynamic
performance, due to the low rotor inertia. They are compact, and offer a high power
density.
This product offer covers a continuous stall torque range between 0.5 Nm and
33.4 Nm for nominal speeds between 2500 and 6000 rpm.
Servo drives:
page 14
6
Options:
page 28
Servo motors BMH:
page 42
Servo motors BSH:
page 54
Servo drive/motor
combinations: page 8
Presentation (continued)
Lexium 32 motion control
Main functions
Type of servo drive
Communication
LXM 32C
LXM 32A
LXM 32M
Integrated
Modbus serial link
Pulse train
Modbus serial link
Pulse train
As an option
–
Modbus serial link
CANopen, CANmotion
machine bus
–
Operating modes
Manual mode (JOG)
Electronic gearbox
Speed control
Current control
Functions
Auto-tuning, monitoring, stopping, conversion
24 V logic inputs
(1)
24 V capture inputs
(1) (2)
24 V logic outputs
(1)
Analog inputs
c
c
c
Pulse control input
ESIM PTO output
Homing
Manual mode (JOG)
Speed control
Current control
Position control
CANopen, CANmotion
machine bus,
DeviceNet, EtherNet/IP,
PROFIBUS DP V1,
EtherCAT
Homing
Manual mode (JOG)
Motion sequence
Electronic gearbox
Speed control
Current control
Position control
–
Stop window
Rapid entry of position values
Rotary axes
Position register
Stop window
Rapid entry of position values
Rotary axes
Position register
6, reassignable
–
4, reassignable
–
1
2
5, reassignable
–
3, reassignable
2
–
1, configurable as:
RS 422 link
5 V or 24 V push-pull
5 V or 24 V open collector
RS 422 link
–
1, configurable as:
RS 422 link
5 V or 24 V push-pull
5 V or 24 V open collector
RS 422 link
b
b
b
b
b
b
–
Human/Machine Interface
Via integrated display terminal:
Safety functions
Integrated
Manual mode (positive/negative, fast/slow), auto-tuning, simple startup, display of information
and errors, homing for Lexium 32A and 32M
“Safe Torque Off” STO
As an option
–
Sensor
Integrated
SinCos Hiperface® sensor
As an option
–
Architecture
Control via:
Logic or analog I/O
b
Type of servo motor
Safe Stop 1 (SS1) and Safe
Stop 2 (SS2)
Safe Operating Stop (SOS)
Safe Limited Speed (SLS)
Control via:
Motion controller via
CANopen and CANmotion
machine bus
b
Resolver encoder
Analog encoder
Digital encoder
Control via:
Schneider Electric or
third-party PLCs via
communication buses and
networks
b
BMH
BSH
Application type
High load
With robust adjustment of the movement
High dynamic response
Power density
Flange size
70, 100, 140, 190 and 205
55, 70, 100 and 140
Continuous stall torque
1.2 to 84 Nm
0.5 to 33.4 Nm
Single turn SinCos:
32,768 points/turn and
131,072 points/turn
Multiturn SinCos:
32,768 points/turn x 4096 turns and
131,072 points/turn x 4096 turns
Single turn SinCos:
131,072 points/turn
Multiturn SinCos:
131,072 points/turn x 4096 turns
Encoder type
b
b
b
b
b
b
Degree of protection
Casing
IP 65 (IP 67 conformity kit as an option)
Shaft end
IP 54 (horizontal mounting (IMB5)) or vertical mounting (IMV1 with shaft end at the top) and
IP 50 (vertical mounting IMV3 with shaft end at the bottom) or
IP 65 (IP 67 conformity kit as an option)
(1) Unless otherwise stated, the logic I/O can be used in positive logic (Sink inputs,
Source outputs) or negative logic (Source inputs, Sink outputs).
(2) The capture inputs can be used as standard logic inputs.
Servo drives:
page 14
Options:
page 28
Servo motors BMH:
page 42
Servo motors BSH:
page 54
Servo drive/motor
combinations: page 8
7
Lexium 32 motion control
Lexium 32 offer
Supply voltage 100…120 V single phase
Servo drive/servo motor combinations
Lexium 32 servo drive/BMH or BSH servo motor combinations
Servo motors
Lexium 32C, 32A and 32M servo drives
100…120 V single-phase supply voltage with integrated EMC filter
BMH
(IP 50 or IP 65)
BSH
(IP 50 or IP 65)
LXM 32 U90M2
Continuous output current: 3 A rms
p
Nominal operating point (1)
Type of
servo
motor
Rotor
inertia
Type of
servo
motor
Rotor
inertia
Nominal
torque
Nominal
speed
kgcm2
Nm
rpm
W
Nm/Nm
BSH 0551T
0.06
0.49
3000
150
0.5/1.5
BSH 0552T
0.10
0.77
3000
250
0.8/1.9
BSH 0553T
0.13
BSH 0701T
0.25
BSH 0702T
0.41
BSH 1001T
1.40
kgcm2
BMH 0701T
Stall torques
Nominal
power
0.59
BMH 0702T
1.13
BMH 0703T
1.67
BMH1001T
3.2
BMH1002T
6.3
(1) These values are given for a supply voltage of 120 V single phase.
(2) - M0: Continuous stall torque,
- Mmax: Peak stall torque.
Servo drives:
page 14
8
Options:
page 28
Servo motors BMH:
page 42
Servo motors BSH:
page 54
M0/Mmax (2)
LXM 32 D18M2
Continuous output current: 6 A rms
LXM 32 D30M2
Continuous output current: 10 A rms
p
p
Nominal operating point (1)
Stall torques
Nominal operating point (1)
Stall torques
Nominal torque
Nominal speed
Nominal power
M0/Mmax (2)
Nominal torque
Nominal speed
Nominal power
M0/Mmax (2)
Nm
rpm
W
Nm/Nm
Nm
rpm
W
Nm/Nm
1.14
3000
350
1.2/3.3
1.35
2500
350
1.4/4.2
1.36
2500
350
1.4/3.5
2.07
2500
550
2.2/6.1
2.3
2500
600
2.5/6.4
3.1
2000
650
3.4/8.7
2.75
2500
700
3.3/6.3
3.3
2000
700
3.4/8.9
3.5
2000
750
6/10.3
(1) These values are given for a supply voltage of 120 V single phase.
(2) - M0: Continuous stall torque,
- Mmax: Peak stall torque.
Servo drives:
page 14
Options:
page 28
Servo motors BMH:
page 42
Servo motors BSH:
page 54
9
Lexium 32 offer (continued)
Lexium 32 motion control
Supply voltage 200…240 V single phase
Servo drive/servo motor combinations
Lexium 32 servo drive/BMH or BSH servo motor combinations
Servo motors
Lexium 32C, 32A and 32M servo drives
200…240 V single-phase supply voltage with integrated EMC filter
BMH
(IP 50 or IP 65)
BSH
(IP 50 or IP 65)
LXM 32 U45M2
Continuous output current: 1.5 A rms
p
Nominal operating point (1)
Type of
servo
motor
BMH 0701T
Rotor
inertia
kgcm2
Stall torques
Nominal
power
Rotor
inertia
Nominal
torque
Nominal
speed
kgcm2
Nm
rpm
W
Nm/Nm
BSH 0551T
0.06
0.45
6000
300
0.5/1.4
BSH 0552T
0.10
BSH 0553T
0.13
BSH 0701T
0.25
BSH 0702T
0.41
BSH 0703T
0.58
BSH 1001T
1.40
BSH 1002T
2.31
0.59
BMH 0702T
1.13
BMH 0703T
1.67
BMH 1001T
3.2
BMH 1002T
6.3
BMH 1003T
9.4
BMH 1401P
16.5
(1) These values are given for a supply voltage of 240 V single phase.
(2) - M0: Continuous stall torque,
- Mmax: Peak stall torque.
Servo drives:
page 14
10
M0/Mmax (2)
Type of
servo
motor
Options:
page 28
Servo motors BMH:
page 42
Servo motors BSH:
page 54
LXM 32 U90M2
Continuous output current: 3 A rms
LXM 32 D18M2
Continuous output current: 6 A rms
p
LXM 32 D30M2
Continuous output current: 10 A rms
p
p
Nominal operating point (1)
Stall
torques
Nominal operating point (1)
Stall
torques
Nominal operating point (1)
Stall
torques
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax (2)
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax (2)
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax (2)
Nm
rpm
W
Nm/Nm
Nm
rpm
W
Nm/Nm
Nm
rpm
W
Nm/Nm
0.74
6000
450
0.8/2.5
0.84
6000
550
1.2/3
0.94
5000
500
1.3/3.5
1.1
4000
450
1.4/4
1.8
5000
950
2.2/7.2
2.1
4000
900
2.6/7.4
2.1
4000
900
2.5/7.4
2.2
4000
900
2.7/7.5
2.9
3000
900
3.4/10.2
2.8
3000
900
3.4/10.2
3.7
4000
1500
5.8/16.4
4.6
3000
1450
6/18.4
5.6
2500
1450
8/23.5
8.9
1500
1450
10.3/30.8
(1) These values are given for a supply voltage of 240 V single phase.
(2) - M0: Continuous stall torque,
- Mmax: Peak stall torque.
Servo drives:
page 14
Options:
page 28
Servo motors BMH:
page 42
Servo motors BSH:
page 54
11
Lexium 32 offer (continued)
Lexium 32 motion control
208…480 V three-phase supply voltage
Servo drive/servo motor combinations
Lexium 32 servo drive/BMH or BSH servo motor combinations
Servo motors
Lexium 32C, 32A and 32M servo drives
208…480 V three-phase supply voltage with integrated EMC filter
BMH
(IP 50 or IP 65)
Motor type
BSH
(IP 50 or IP 65)
Rotor
inertia
0.59
BMH 0701P
0.59
LXM 32 D12N4
Continuous output current: 3 A rms
Nominal operating point (1)
Stall
torques
Nominal operating point (1)
Stall
torques
M0/Mmax
(2)
Nominal Nominal
torque speed
Nominal
power
M0/Mmax
(2)
Nm
W
Nm/Nm
p
Motor type
Rotor
inertia
Nominal Nominal
torque speed
kgcm2
Nm
rpm
W
Nm/Nm
BSH 0551P
0.06
0.48
6000
300
0.5/1.5
BSH 0552P
0.10
0.65
6000
400
0.8/2.5
BSH 0553P
0.13
0.65
6000
400
1.05/3.5
1.1
3000
350
1.2/4.2
kgcm2
BMH 0701P
LXM 32 U60N4
Continuous output current: 1.5 A rms
Nominal
power
p
rpm
1.3
5000
700
1.4/4.2
BSH 0701P
0.25
1.32
5000
700
1.4/3.5
BSH 0702P
0.41
1.64
5000
850
2.2/7.6
BMH 1001P
3.2
1.9
4000
800
3.3/10.8
BMH 0702P
1.13
2.2
3000
700
2.5/7.4
BMH 0703T
1.67
BMH 1001P
3.2
BMH 1002P
6.3
BMH 1003P
9.4
BMH 1401P
16.5
BMH 1402P
BSH 0703P
0.58
BSH 1001P
1.40
BSH 1002P
2.31
BSH 1003P
3.2
BSH 1004P
4.2
BSH 1401P
7.4
BSH 1402T
12.7
BSH 1403T
17.9
BSH 1404P
23.7
32.0
BMH 1403P
47.5
BMH 1901P
67.7
BMH 1902P
130
BMH 1903P
194
BMH 2053P
190
(1) These values are given for a supply voltage of 400 V single phase.
(2) - M0: Continuous stall torque,
- Mmax: Peak stall torque.
Servo drives:
page 14
12
Options:
page 28
Servo motors BMH:
page 42
Servo motors BSH:
page 54
LXM 32 D18N4
Continuous output current: 6 A rms
LXM 32 D30N4
Continuous output current: 10 A rms
p
LXM 32 D72N4
Continuous output current: 24 A rms
p
p
Nominal operating point (1)
Stall
torques
Nominal operating point (1)
Stall
torques
Nominal operating point (1)
Stall
torques
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
(2)
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
(2)
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
(2)
Nm
rpm
W
Nm/Nm
Nm
rpm
W
Nm
Nm
rpm
W
Nm
6.2
4000
2600
8.4/25.1
6.3
3000
2000
8/28.3
7.6
3000
2400
10.3/30.8
8.3
2500
2100
10/37.9
9.5
2500
2500
11.1/27
12.1
3000
3800
16.8/50.3
12.3
3000
3900
19.5/59.3
12.9
3000
4100
27.8/90.2
14.2
3000
4500
24/71.8
19
2500
5000
33.4/103.6
18.4
2500
4800
30/77.7
22.3
2500
5900
37.4/101
36
1500
5700
43.2/123
52.2
1200
6500
84/232
2.4
5000
1300
3.4/10.2
2.44
5000
1300
3.1/11.3
2.7
4000
1100
3.3/9.6
3.1
4000
1300
3.4/10.2
3.9
4000
1600
5.9/18.4
4
4000
1700
5.8/18.3
(1) These values are given for a supply voltage of 400 V single phase.
(2) - M0: Continuous stall torque,
- Mmax: Peak stall torque.
Servo drives:
page 14
Options:
page 28
Servo motors BMH:
page 42
Servo motors BSH:
page 54
13
Lexium 32 motion control
References
PF516055
Servo drives
Lexium 32C, 32A and 32M servo drives
Output current
at 8 kHz
Continuous
(rms)
Peak
(rms) (1)
A
A
Nominal power
at 8 kHz
Line current
(2)
Max. prospective Reference
line Isc
kW
A
kA
Single-phase supply voltage: 115 V
1.5
3
LXM 32C
p
p
p
p
3
6
10
0.15
PF516056
3
6
10
p
p
p
2.9
0.3
10
5.4
15
0.5
4.5
9
18
30
8.5
0.8
Single-phase supply voltage: 230 V
1.5
p
kg
50/60 Hz, with integrated EMC filter (3)
a
1
1
LXM 32CU45M2
1.600
LXM 32AU45M2
1.600
LXM 32MU45M2
1.700
LXM 32CU90M2
1.700
LXM 32AU90M2
1.700
LXM 32MU90M2
1.800
p
6
LXM 32A
A
12.9
a
1
1
LXM 32CD18M2
1.800
LXM 32AD18M2
1.800
LXM 32MD18M2
1.900
LXM 32CD30M2
2.000
LXM 32AD30M2
2.000
LXM 32MD30M2
2.100
LXM 32CU45M2
1.600
LXM 32AU45M2
1.600
LXM 32MU45M2
1.700
50/60 Hz, with integrated EMC filter (3)
0.3
0.5
1
1.6
2.9
4.5
8.4
12.7
1
1
1
1
p
Dimensions (overall)
LXM 32CU90M2
1.700
LXM 32AU90M2
1.700
LXM 32MU90M2
1.800
LXM 32CD18M2
1.800
LXM 32AD18M2
1.800
LXM 32MD18M2
1.900
LXM 32CD30M2
2.000
LXM 32AD30M2
2.000
LXM 32MD30M2
2.100
WxHxD
mm
LXM 32CU45M2, CU90M2, CD18M2
LXM 32AU45M2, AU90M2, AD18M2
48 x 270 x 237
LXM 32MU45M2, MU90M2, MD18M2, MD30M2
LXM 32CD30M2
LXM 32AD30M2
68 x 270 x 237
(1) Maximum value for 1 second.
(2) Without line choke (see page 33).
(3) Additional EMC filters available as an option (see page 34).
Presentation:
page 4
14
Weight
Options:
page 28
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
Lexium 32 motion control
References (continued)
PF516057
Servo drives
Lexium 32C, 32A and 32M servo drives (continued)
Output current
at 8 kHz
Continuous
(rms)
Peak
(rms)(1)
A
A
Nominal power
at 8 kHz
Line current
(2)
Max. prospective Reference
line Isc
kW
A
kA
Three-phase supply voltage: 208 V
1.5
6
3
LXM 32M
p
p
p
p
12
a
A
Weight
kg
50/60 Hz, with integrated EMC filter (3)
0.4
1.4
0.9
3
5
5
LXM 32CU60N4
1.700
LXM 32AU60N4
1.700
LXM 32MU60N4
1.800
LXM 32CD12N4
1.800
LXM 32AD12N4
1.800
LXM 32MD12N4
1.900
LXM 32CD18N4
2.000
LXM 32AD18N4
2.000
LXM 32MD18N4
2.100
LXM 32CD30N4
2.600
LXM 32AD30N4
2.600
LXM 32MD30N4
2.700
LXM 32CD72N4
–
LXM 32AD72N4
–
LXM 32MD72N4
–
LXM 32CU60N4
1.700
LXM 32AU60N4
1.700
LXM 32MU60N4
1.800
LXM 32CD12N4
1.800
LXM 32AD12N4
1.800
LXM 32MD12N4
1.900
LXM 32CD18N4
2.000
LXM 32AD18N4
2.000
LXM 32MD18N4
2.100
LXM 32CD30N4
2.600
LXM 32AD30N4
2.600
LXM 32MD30N4
2.700
LXM 32CD72N4
–
LXM 32AD72N4
–
LXM 32MD72N4
–
p
6
18
10
30
24
72
1.8
3
6
3
12
6
18
10
30
24
72
8.7
7
Three-phase supply voltage: 480 V
1.5
5.5
18.1
a
5
5
5
50/60 Hz, with integrated EMC filter (3)
0.4
0.9
1.8
3
7
1.2
2.4
4.5
7
14.6
5
5
5
5
5
Dimensions (overall)
WxHxD
mm
LXM 32CU60N4, CD12N4, CD18N4
LXM 32AU60N4, AD12N4, AD18N4
48 x 270 x 237
LXM 32MU60N4, MD12N4, MD18N4, MD30N4
LXM 32CD30N4
LXM 32AD30N4
68 x 270 x 237
LXM 32 D72N4
108 x 270 x 237
p
(1) Maximum value for 1 second.
(2) Without line choke (see page 33).
(3) Additional EMC filters available as an option (see page 34).
Presentation:
page 4
Options:
page 28
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
15
References (continued)
Lexium 32 motion control
Servo drives
Accessory and documentation
Servo drive name plate
Description
Name plate
(sold in multiples of 50)
Use
Dimensions
mm
Reference
This contains information about the
servo drive.
To be clipped onto the top right-hand part
of the servo drive
385 x 130
VW3 M2 501
Weight
kg
–
Documentation
Description
Reference
Weight
kg
VW3 A8 200
“Description of the Motion & Drives offer” DVD-ROM (1)
0.100
Comprising:
Technical documentation (programming manuals, installation manuals,
quick reference guides)
SoMove Lite setup software
Catalogues, brochures
b
b
b
Simplified Lexium 32 user's manual
Available on our
website
www.schneiderelectric.com
(1) The documentation for the servo drives and servo motors is also available on our website www.schneider-electric.com.
Presentation:
page 4
16
Options:
page 28
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
–
Lexium 32 motion control
References (continued)
Servo drives
Dialogue tool
Remote graphic display terminal (to be ordered separately) (1)
Lexium 32 servo drives can be connected to a remote graphic display terminal,
which can be used remotely using remote mounting accessories. It can be mounted
on an enclosure door with IP 54 degree of protection.
This terminal is common to various ranges of variable speed drives or servo drives.
It has a graphic screen and is used to accesses the same functions as the
integrated display and control keys on the servo drive, as well as some additional
functions. It can be used for example to:
Configure, adjust and control the servo drive remotely
Display the servo drive status and faults remotely
Override the servo drive I/O
Execute motion sequences
Load configurations
b
b
b
b
b
Its main characteristics are as follows:
The graphic screen displays 8 lines of 24 characters of plain text.
The navigation button provides quick and easy access to the drop-down menus.
It is supplied with six languages installed as standard (Chinese, English, French,
German, Italian and Spanish). Other languages can be downloaded to the flash
memory using the VW3 A8 121 Multi-Loader configuration tool (see page 19).
Its maximum operating temperature is 60°C.
b
b
DF600405
b
9
7
1
8
2
3
6
5
4
Description
1 Graphic display:
- 8 lines of 24 characters, 240 x 160 pixels
- Large digit display
- Bar chart display
2 Function keys F1, F2, F3, F4
3 “ESC” key: aborts a value, a parameter or a menu to return to the previous
selection
4 “FWD/REV” key: Local control for reversing the direction of rotation of the motor
5 Navigation button:
- Rotate ±: Goes to the next or previous line, increases or decreases the value
- Press: Saves the current value (“ENT”)
6 Motor local control keys:
- “RUN”: Starts the motor
- “STOP/RESET”: Local control of motor stopping/clearing drive faults
7 Remote graphic display terminal
8 Remote-mounting cordset
9 Female/female RJ45 adaptor
References
Description
Graphic display terminal
+
remote-mounting cordset
+
female/female RJ45 adaptor
Item no.
Length
m
Reference
Remote graphic display terminal
A remote-mounting cordset
(VW3 A1 104R ) and an RJ45 adaptor
(VW3 A1 105) are also required
7
–
VW3 A1 101
Remote-mounting cordsets
equipped with 2 RJ45 connectors
8
p
Weight
kg
–
p
Female/female RJ45 adaptor
9
1
VW3 A1 104R10
0.050
3
VW3 A1 104R30
0.150
5
VW3 A1 104R50
0.250
10
VW3 A1 104R100
0.500
–
VW3 A1 105
0.010
(1) This terminal may require a software upgrade using the VW3 A8 121 Multi-Loader
configuration tool (see page 19).
Presentation:
page 4
Options:
page 28
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
17
Lexium 32 motion control
References (continued)
Servo drives
Configuration tools
SoMove Mobile software for mobile phones
The SoMove Mobile software converts any compatible mobile phone into a remote
graphic display terminal, offering an identical Human-Machine Interface
(see page 17).
Particularly suitable for on-site or remote maintenance operations, the SoMove
Mobile software can be used to print out and save configurations, import them from
a PC and export them to a PC, or to a servo drive equipped with the Modbus adaptor
via the Bluetooth® wireless link.
It requires a mobile phone with minimum features, please consult our website
www.schneider-electric.com.
The SoMove Mobile software and drive configuration files can be downloaded from
our website www.schneider-electric.com.
Configuration with SoMove Mobile software for mobile
phones via Bluetooth®
Reference
Description
Reference
SoMove Mobile software for mobile phones
Download from our website
www.schneider-electric.com.
–
Modbus-Bluetooth® adaptor
Enables any non-Bluetooth® device to communicate
using this technology.
TCSW AAC13FB
Weight
kg
–
0.032
Comprising:
1 Bluetooth® adaptor (range 20 m, class 2) with
an RJ45 connector
For SoMove: 1 x 0.1 m cordset with
2 x RJ45 connectors
Etc.(1)
b
b
b
SoMove setup software
The SoMove setup software is used to configure, adjust, debug and maintain the
Lexium 32 servo drive, as for all other Schneider Electric variable speed drives and
starters.
It communicates via Bluetooth® wireless link with the servo drive, which is equipped
with the Modbus-Bluetooth® adaptor (VW3 A8 114).
It can be downloaded from our website www.schneider-electric.com or is available
on the “Description of the Motion & Drives Offer” DVD ROM (VW3 A8 200).
For presentation, description and references, see page 36.
Configuration with the SoMove setup software via
Bluetooth®
Presentation:
page 4
18
Options:
page 28
(1) Also includes other components for connecting compatible Schneider Electric devices.
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
Lexium 32 motion control
References (continued)
Servo drives
PF080925
Configuration tools
Multi-Loader configuration tool
The Multi-Loader tool enables several configurations to be copied from a PC or a
servo drive and loaded onto another servo drive.
The Lexium 32 servo drives do not need to be powered up.
References
Description
Reference
Weight
kg
Multi-Loader configuration tool
Supplied with:
1 cordset equipped with 2 RJ45 connectors
1 cordset equipped with one type A USB connector and
one mini B USB connector
1 x 2 GB SD memory card
1 x female/female RJ 45 adaptor
4 AA 1.5 V LR6 round batteries
VW3 A8 121
–
Cordset for Multi-Loader tool
For connecting the Multi-Loader tool to the Lexium 32
servo drive in its packaging.
Equipped with:
A non-locking RJ45 connector with
special mechanical catch on the drive end and
An RJ45 connector on the Multi-Loader end.
VW3 A8 126
–
b
b
Configuration of a Lexium 32 in its packaging with the
VW3 A8 121 Multi-Loader tool + a VW3 A8 126 cordset
b
b
b
b
b
PF080995
Memory card
Description
Duplication of an application with
the VW3 M8 705 memory card
Presentation:
page 4
Options:
page 28
Reference
Weight
kg
Memory card
Used to store the parameters of the Lexium 32 servo drive.
Another Lexium 32 servo drive can be commissioned
immediately in the event of maintenance or duplication.
VW3 M8 705
–
Pack of 25 memory cards
VW3 M8 704
–
Memory card recorder
Writes data from the Lexium 32 servo drive to the
memory card.
This recorder is not supplied by Schneider Electric.
See the User's
manual
–
BMH servo motors:
page 42
Servo drive/motor
combinations: page 8
BSH servo motors:
page 54
19
Lexium 32 motion control
References (continued)
Servo drives
Connection accessories
Connection accessories
Replacement connectors
Designation
Set of connectors
For use
with
Description
Reference
Weight
kg
Lexium 32C
Comprising:
3 connectors for the line supply
1 connector for the DC bus
3 connectors for the I/O
1 connector for the motor power supply
1 connector for the holding brake
VW3 M2 201
–
Comprising:
3 connectors for the line supply
1 connector for the DC bus
2 connectors for the I/O
1 connector for the motor power supply
1 connector for the holding brake
VW3 M2 202
–
Comprising:
3 connectors for the line supply
1 connector for the DC bus
3 connectors for the I/O
1 connector for the motor power supply
1 connector for the holding brake
VW3 M2 203
–
Comprising:
10 connectors for creating extension cordsets for the
DC bus
VW3 M2 207
–
Description
Length
m
Unit
reference
Between 1 Altivar 32 drive (1) and
1 Lexium 32 servo drive:
32M2/LXM 32
M2
ATV 32H
ATV 32H
32N4/LXM 32
N4
Equipped with 2 connectors
(sold in lots of 5)
0.18
VW3 M7 101R01
–
For Lexium 32C and 32M
servo drives
Equipped with 2 RJ45 connectors
0.3
VW3 M8 502R03
0.025
1.5
VW3 M8 502R15
0.062
Equipped with 1 RJ45 connector and
a free end
3
VW3 M8 223R30
–
Replacement of a Lexium 05
servo drive with a
Lexium 32 servo drive
Equipped with
one 10-way Molex connector and
one RJ45 connector
(Lexium 32 servo drive end).
Cable length 1 m
–
VW3 M8 111R10
–
Replacement of a Lexium 15
servo drive with a
Lexium 32 servo drive
Equipped with
one 15-way male SUB-D connector
and
one RJ45 connector
(Lexium 32 servo drive end).
Cable length 1 m
–
VW3 M8 112R10
–
Length
m
Reference
15
VW3 M7 102R150
b
b
b
b
b
Lexium 32A
b
b
b
b
b
Lexium 32M
b
b
b
b
b
Lexium 32 (all types)
b
Cordsets
For use with
Daisy chain connection of the
DC bus
Daisy chain connection or
pulse control
Adaptor for motor
encoder cable
p
p
p
p
p
p
p
p
p
p
p
p
Weight
kg
p
p
Cable
Designation
Shielded cable for
Daisy chain connection of
the DC bus
Between 1 Altivar 32 drive (1) and
1 servo drive Lexium 32:
ATV 32H
M2/LXM 32
M2
ATV 32H
N4/LXM 32
N4
p
p
p
p
p
p
p
p
p
p
p
p
p
p
(1) Variable speed offer, see the “Altivar 32 variable speed drives” catalogue or consult our website www.schneider-electric.com.
Presentation:
page 4
20
Options:
page 28
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
Weight
kg
–
References (continued)
Lexium 32 motion control
Lexium 32A servo drives
Connection accessories
M238 logic controller
CANopen and CANmotion machine bus for Lexium 32A servo drives
5
CANopen
machine bus
1
Lexium 32A servo drives can be connected directly to the CANopen machine bus using an RJ45 connector. To
simplify daisy chain connection, each servo drive is equipped with two connectors of this type (marked CN4 and
CN5).
The communication function provides access to the servo drive’s configuration, adjustment, control and
monitoring functions.
Used with a Lexium Controller motion controller, the CANmotion bus can be used to control motion for
applications with up to eight Lexium 32A servo drives.
3
Connection accessories (1)
Description
Lexium 32A
Lexium 32A
Example of architecture
with control by
M238 logic controller
Use
Item no.
Reference
IP 20 CANopen tap junction
2 RJ45 ports
Tap-off from trunk cable for RJ45 wiring
1
VW3 CAN TAP2
0.480
Line terminator
120 Ω
(equipped with one RJ45
connector)
Connection to the RJ45 connector
2
TCS CAR 013M120
0.009
Use
Item no. Length
Cordsets and cables (1)
Twido programmable controller +
TWD NC01M
Description
From
CANopen
machine bus
4
3
2
Lexium 32A
Lexium 32A
Example of architecture with
control by Twido
programmable controller
Lexium Controller
LMC 20 or LMC 20A130
p
To
CANopen cordsets (1)
equipped with 2 RJ45
connectors
VW3 CAN TAP2
LXM 32A servo drive
junction box
(CN4 and CN5
LXM 32A servo drive connectors)
(CN4 and CN5
connectors)
3
CANopen cordsets (1)
equipped with
one 9-way female SUB-D
connector with integrated line
terminator and one RJ45
connector
Twido programmable LXM 32A servo drive
(CN4 and CN5
controller
connectors)
Motion controller
Lexium Controller
LMC 20,
LMC 20A130
4
CANopen
machine bus
Weight
kg
0.3
VW3 CAN CARR03
0.320
1
VW3 CAN CARR1
0.500
1
VW3 M3 805R010
–
3
VW3 M3 805R030
–
50
TSX CAN CA 50
100
TSX CAN CA 100
8.800
300
TSX CAN CA 300
24.560
50
TSX CAN CB 50
3.580
100
TSX CAN CB 100
7.840
300
TSX CAN CB 300
21.870
50
TSX CAN CD 50
3.510
100
TSX CAN CD 100
7.770
300
TSX CAN CD 300
21.700
p
CANopen cables (1)
PLC
Standard cables,
marking
Low smoke, zero halogen
Flame retardant (IEC 60332-1)
VW3 CAN TAP2
junction box
PLC
CANopen cables (1)
UL certification,
marking
Flame retardant (IEC 60332-2)
VW3 CAN TAP2
junction box
CANopen cables (1)
PLC
Cables for harsh environments
(2) or mobile installation,
marking
Low smoke, zero halogen
Flame retardant (IEC 60332-1)
VW3 CAN TAP2
junction box
5
e
5
5
e
3
Reference
m
e
4
Weight
kg
4.930
2
Lexium 32A
Lexium 32A
Example of architecture with
control by
LMC Lexium Controller
Presentation:
page 4
(1) For other CANopen machine bus connection accessories, please consult our website www.schneider-electric.com.
(2) Harsh environment:
- Resistance to hydrocarbons, industrial oils, detergents, solder splashes,
- Relative humidity up to 100%,
- Saline atmosphere,
- Significant temperature variations,
- Operating temperature between - 10°C and + 70°C.
Options:
page 28
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
21
Lexium 32 motion control
Presentation
Communication buses and networks
CANopen/CANmotion machine bus
Lexium 32A servo drives integrate the CANopen communication protocol as
standard (see page 21).
If one of the communication cards (available as options) is added, the Lexium 32M
servo drive can be connected to the following communication buses and networks:
CANopen and CANmotion machine bus
PROFIBUS DP V1 fieldbus
DeviceNet fieldbus
EtherNet/IP network
EtherCAT fieldbus
b
b
b
b
b
The Lexium 32M servo drive can only take one communication card.
CANopen and CANmotion machine bus
Presentation
Modicon M238/Modicon M258 PLC
Magelis XBT GT
CANopen machine bus
Osicoder
encoder
Osicoder
encoder
Lexium 32M
PF080931
ATV 32
ATV 71
TeSys Quickfit
The CANopen machine bus is specifically designed for integration in control system
architectures. It provides openness and interoperability for various devices (drives,
motor starters, smart sensors, etc.).
A tiered CANopen connectivity solution reduces costs and optimizes the creation of
the control system architecture, providing:
Reduced cabling time
Greater reliability of the load
Flexibility should you need to add or remove equipment
It is very easy to set up.
b
b
b
The same communication card provides access to either the CANopen or
CANmotion machine bus. The characteristics of the cards are available on our
website www.schneider-electric.com.
Installing the CANopen communication card
VW3 A3 608
An optimized solution for connection to the CANopen/CANmotion machine
bus
To simplify the setup of Lexium 32M servo drives, three communication cards are
available, each with different connectors:
CANopen/CANmotion Daisy chain card with connection to the bus via two RJ45
connectors, providing an optimized solution for daisy chain connection to the
CANopen machine bus (see page 23)
CANopen/CANmotion card with connection to the bus via screw terminals (see
page 23)
CANopen/CANmotion card with connection to the bus via 9-way male
SUB-D connector (see page 24)
b
b
b
Presentation:
page 4
22
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
Lexium 32 motion control
References
Communication buses and networks
CANopen/CANmotion machine bus
CANopen/CANmotion machine bus: connection via RJ45 connector
CANopen/CANmotion Daisy Chain communication card
Description
CANopen/CANmotion
Daisy Chain card
for
Lexium 32M servo drives
Type of port
Item no.
Unit
reference
2 RJ45 connectors
1
VW3 A3 608
Weight
kg
–
Connection accessories for VW3 A3 608 CANopen Daisy Chain card
VW3 A3 608 CANopen
communication card
Twido
or Lexium
Controller
programmable
controller
CANopen line terminator (1)
With RJ45 connector
2
TCS CAR 013M120
0.009
CANopen IP 20
junction boxes
2 RJ45 connectors
–
VW3 CAN TAP2
0.250
Cordsets for VW3 A3 608 CANopen/CANmotion Daisy Chain card
Description
CANopen cordsets equipped
with one RJ45 connector at
each end
CANopen
machine bus
or
4
Use
3
2
1
Lexium 32M
Lexium 32M
Daisy chain connection with
VW3 A3 608 CANopen card
CANopen cordsets equipped
with one 9-way female SUB-D
connector with integrated line
terminator and
one RJ45 connector
Item no. Length Reference
m
From
To
LXM 32A
servo drive
LXM 32M
servo drive
VW3 A3 608 card
VW3 CAN TAP2
junction box
VW3 A3 608 card
LXM 32A
servo drive
LXM 32M
servo drive
3
Twido programmable
controller
Lexium Controller:
LMC 20
LMC 20A130
VW3 A3 608 card
LXM 32A
servo drive
LXM 32M
servo drive
4
Weight
kg
0.3
VW3 CAN CARR03
0.320
1
VW3 CAN CARR1
0.500
1
VW3 M3 805R010
–
3
VW3 M3 805R030
–
CANopen/CANmotion machine bus: connection via screw terminals
CANopen/CANmotion communication card
Description
CANopen/CANmotion card
for
Lexium 32M servo drives
Type of port
Item no.
Unit
reference
One 5-way screw terminal block
1
VW3 A3 628
Weight
kg
–
Connection accessory for VW3 A3 628 CANopen/CANmotion communication card
CANopen line terminator (1)
Stripped wires
for screw terminal connector
2
TCS CAR 013M120
–
Connection cables for VW3 A3 628 CANopen/CANmotion communication card
Description
VW3 A3 628 CANopen
communication card
Use
To
CANopen cables
Standard cables,
marking
Low smoke zero halogen
Flame retardant
(IEC 60332-1)
Programmable
controller
VW3 A3 628 card
CANopen cables
marking
UL certification,
Flame retardant
(IEC 60332-2)
Programmable
controller
e
Modicon M328/M258
programmable controller
e
CANopen machine
bus (2)
Item no. Length Reference
From
VW3 A3 628 card
m
3
3
Weight
kg
50
TSX CAN CA 50
100
TSX CAN CA 100
8.800
300
TSX CAN CA 300
24.560
50
TSX CAN CB 50
3.580
100
TSX CAN CB 100
7.840
300
TSX CAN CB 300
21.870
50
TSX CAN CD 50
3.510
100
TSX CAN CD 100
7.770
300
TSX CAN CD 300
21.700
4.930
1
Lexium 32M
3
1+2
Lexium 32M
Example of connecting
Lexium 32M with
VW3 A3 628 card
Programmable
CANopen cables
Cable for harsh environment (3) controller
or mobile installation,
marking
Low smoke zero halogen
Flame retardant
(IEC 60332-1)
e
VW3 A3 628 card
3
(1) Sold in lots of 2.
(2) Cable dependent on the type of controller or PLC; please refer to the corresponding catalogue.
(3) Harsh environment:
- resistance to hydrocarbons, industrial oils, detergents, solder splashes,
- relative humidity up to 100%,
- saline atmosphere,
- significant temperature variations, operating temperature between - 10°C and + 70°C.
23
Lexium 32 motion control
References (continued)
Communication buses and networks
PF080926
CANopen/CANmotion machine bus
CANopen/CANmotion machine bus: connection via SUB-D connector
CANopen/CANmotion communication card
Description
CANopen/CANmotion card
for
Lexium 32M servo drives
Type of port
Item no.
Reference
One 9-way
male SUB-D connector
1
VW3 A3 618
Weight
kg
–
Connection accessories for VW3 A3 618 CANopen/CANmotion card
Description
VW3 A3 618 CANopen
communication card
Twido
or Lexium
Controller
programmable
controller
Item no.
Unit
reference
9-way female
–
SUB-D connector with
screw terminals.
Line termination switch that can
be deactivated
2
VW3 M3 802
–
CANopen line terminator (1)
Stripped wires
for screw terminal connector
3
TCS CAR 01NM120
–
CANopen IP20 connectors,
9-way female SUB-D
Line termination switch that
can be deactivated
Description
Straight
–
TSX CAN KCDF180T
0.049
Angled at 90°
–
TSX CAN KCDF90T
0.046
Angled at 90° with 9-way SUB-D
for connecting PC or diagnostics tool
–
TSX CAN KCDF90TP
0.051
To
Item no. Length Reference
m
CANopen IP 20 cordsets
Lexium Controller:
equipped with one 9-way female LMC 20
SUB-D 9 connector at each end. LMC 20A130
Standard cables,
marking
Low smoke zero halogen
Flame retardant
(IEC 60332-1)
VW3 A3 618 card
4
CANopen IP 20 cordsets
Lexium
equipped with one 9-way female Controller:LMC 20
SUB-D 9 connector at each end. LMC 20A130
Standard cables,
UL certification,
marking
Flame retardant
(IEC 60332-2)
VW3 A3 618 card
CANopen
machine bus
Use
From
4
1+2
5
1+2
Weight
kg
Cordsets for VW3 A3 618 CANopen/CANmotion card
or
Lexium 32M
Type of port
e
4
Weight
kg
0.3
TSX CAN CADD 03
0.091
1
TSX CAN CADD 1
0.143
3
TSX CAN CADD 3
0.295
5
TSX CAN CADD 5
0.440
0.3
TSX CAN CBDD 03
0.086
1
TSX CAN CBDD 1
0.131
3
TSX CAN CBDD 3
0.268
5
TSX CAN CBDD 5
0.400
e
Lexium 32M
5
CANopen/CANmotion machine bus: other connection accessories
Description
Use
To
m
CANopen cables
marking
Standard cables,
Low smoke zero halogen
Flame retardant
(IEC 60332-1)
VW3 M3 802
connector
TSX CAN KCDF90T
connector
M238 logic controller
VW3 M3 802
5
connector
TSX CAN KCDF90T
connector
M238 logic controller
50
CANopen cables
marking
UL certification,
Flame retardant
(IEC 60332-2)
VW3 M3 802
connector
TSX CAN KCDF90T
connector
M238 logic controller
VW3 M3 802
5
connector
TSX CAN KCDF90T
connector
VW3 CAN TAP2
junction box
CANopen cables
Cable for harsh environment (2)
or mobile installation,
marking
Low smoke zero halogen
Flame retardant
(IEC 60332-1)
VW3 M3 802
connector
TSX CAN KCDF90T
connector
M238 logic controller
VW3 M3 802
5
connector
TSX CAN KCDF90T
connector
VW3 CAN TAP2
junction box
e
Lexium 32M
Example of connection to the
CANopen machine bus with
VW3 A3 618 card
Item no. Length Reference
From
1+3
e
e
kg
TSX CAN CA 50
24
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
4.930
100
TSX CAN CA 100
8.800
300
TSX CAN CA 300
24.560
50
TSX CAN CB 50
3.580
100
TSX CAN CB 100
7.840
300
TSX CAN CB 300
21.870
50
TSX CAN CD 50
3.510
100
TSX CAN CD 100
7.770
300
TSX CAN CD 300
21.700
(1) Sold in lots of 2.
(2) Harsh environment:
- resistance to hydrocarbons, industrial oils, detergents, solder splashes,
- relative humidity up to 100%,
- saline atmosphere,
- significant temperature variations, operating temperature between - 10°C and + 70°C.
Presentation:
page 4
Weight
BSH servo motors:
page 54
Lexium 32 motion control
Presentation,
references
Communication buses and networks
PROFIBUS DP V1 and DeviceNet fieldbuses
PROFIBUS DP V1 fieldbus
PF080928
Presentation
Other communication network
Quantum (1)
Lexium 32
Lexium 32
PROFIBUS DP V1 fieldbus
VW3 A3 607 PROFIBUS DP V1
communication card
Repeaters
(3 max.)
With Unity, PL7 and
Sycon software (1)
Altivar 71
PROFIBUS DP is a fieldbus for industrial communication.
The Lexium 32M servo drive is connected to the PROFIBUS DP V1 fieldbus via the
VW3 A3 607 communication card.
Other devices can be connected to the PROFIBUS DP V1 bus such as PLCs (1),
STB I/O (2), Altivar variable speed drives (3), Osicoder rotary encoders (4), etc.
Reference
Description
PROFIBUS DP V1 card
For use with
Type of port
Reference
Lexium 32M servo drives
One 9-way female SUB-D connector
VW3 A3 607
Weight
kg
0.140
DeviceNet fieldbus
PF080941
Presentation
Magelis XBT
Third-party control
system
DeviceNet fieldbus
VW3 M3 301 DeviceNet
communication card
Lexium 32M
ATV 71
Lexium 32M
ATV 32
The DeviceNet fieldbus is used in industry to manage a large number of devices
remotely.
Connection to the DeviceNet fieldbus allows Lexium 32M servo drives to
standardize motion control solutions, while remaining independent of the system
controlling the machine.
Reference
Description
DeviceNet card
For use with
Lexium 32M servo drive
Type of port
Profiles supported
One removable screw connector, CIP motion profile
5 contacts with 5.08 pitch
Profile compatible with
PLCopen libraries
Reference
Weight
kg
VW3 M3 301
–
(1) Please refer to the “Automation platform Modicon Quantum and Unity” catalogue or our website www.schneider-electric.com.
(2) Please refer to the “Human-Machine interfaces” catalogue or our website www.schneider-electric.com.
(3) Please refer to the “Altivar ... variable speed drives” catalogue or our website www.schneider-electric.com.
(4) Please refer to the “Detection for automation solutions OsiSense” catalogue or our website www.schneider-electric.com.
25
Lexium 32 motion control
Presentation,
references
Communication buses and networks
EtherNet/IP network
EtherNet/IP network
PF080927
Presentation
Premium (bus manager)/
Modicon M340 PLC
SoMove
software
Lexium 32M
Web
browser
Lexium 32M
EtherNet/IP network
VW3 A3 616 EtherNet/IP
communication card
ATV 71
ATV 32
The EtherNet/IP network is a protocol specially designed for industrial
environments. It uses the widely implemented Ethernet protocols: TCP
(Transmission Control Protocol) and IP (Internet Protocol), thus offering an
integrated transparent connection system to the company network.
Thanks to its high speed, the network no longer restricts the application's
performance.
It is the pre-eminent open protocol and supports all types of communication:
Web pages
File transfers
Messaging
b
b
b
Reference
Description
EtherNet/IP card
10/100 Mbps, half and full
duplex
Embedded Web server
b
For use
with
Type of port
Reference
Lexium 32M
servo drives
2 RJ45 connectors
VW3 A3 616
Weight
kg
0.300
b
EtherNet/IP network connection accessories
Description
Type of port
Length
m (1)
Reference
Weight
kg
ConneXium cordsets (conforming to EIA/TIA-568, category 5 and IEC1180/EN50173, class D, standards)
Straight shielded twisted pair cordsets
Crossed shielded twisted pair cordsets
2 RJ45 connectors
2 RJ45 connectors
2
490 NTW 000 02
–
5
490 NTW 000 05
–
12
490 NTW 000 12
–
5
490 NTC 000 05
–
15
490 NTC 000 15
–
2
490 NTW 000 02U
–
5
490 NTW 000 05U
–
15
490 NTW 000 12U
–
5
490 NTC 000 05U
–
ConneXium cordsets (conforming to UL and CSA 22.1 standards)
Straight shielded twisted pair cordsets
Crossed shielded twisted pair cordsets
2 RJ45 connectors
2 RJ45 connectors
(1) Also available in 40 and 80 metre lengths.
To order other ConneXium connection components, please refer to our website www.schneider-electric.com.
Presentation:
page 4
26
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
Lexium 32 motion control
Presentation,
references
Communication buses and networks
EtherCAT fieldbus
EtherCAT fieldbus
PF100281
Presentation
Third-party
control system
SoMove
software
Lexium 32M
Web
browser
Lexium 32M
EtherCAT network
VW3 A3 601 EtherCAT
communication card
ATV 71
ATV 32
EtherCAT (EtherNet for Control Automation Technology) is an open fieldbus whose
technology is based on EtherNet. As a result, all EtherNet technologies can be used
in the EtherCAT environment: embedded Web server, e-mail, FTP transfer, etc.
The EtherCAT fieldbus is intended for applications requiring very short cycle times
( 250 µs) with low jitter (≤1 µs) for perfect synchronization.
y
These characteristics enable the EtherCAT network to achieve very high
performance levels in the control systems field, with low equipment costs.
Reference
Description
EtherCAT card
For use
with
Type of port
Reference
Lexium 32M
servo drives
2 RJ45 connectors
VW3 A3 601
Weight
kg
0.300
EtherCAT fieldbus connection accessories
Description
Type of
port
Length
m (1)
Reference
Weight
kg
ConneXium cordsets (conforming to EIA/TIA-568, category 5, and IEC1180/EN50173, class D, standards)
Straight shielded twisted pair cordsets
Crossed shielded twisted pair cordsets
2 RJ45 connectors
2 RJ45 connectors
2
490 NTW 000 02
–
5
490 NTW 000 05
–
12
490 NTW 000 12
–
5
490 NTC 000 05
–
15
490 NTC 000 15
–
2
490 NTW 000 02U
–
5
490 NTW 000 05U
–
15
490 NTW 000 12U
–
5
490 NTC 000 05U
–
ConneXium cordsets (conforming to UL and CSA 22.1 standards)
Straight shielded twisted pair cordsets
Crossed shielded twisted pair cordsets
2 RJ45 connectors
2 RJ45 connectors
(1) Also available in 40 and 80 metre lengths.
To order other ConneXium connection components, please refer to our website www.schneider-electric.com.
Presentation:
page 4
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
27
Lexium 32 motion control
Presentation,
references
PF080920
Option: encoder cards for Lexium 32M
servo drives
Presentation
The Lexium 32M servo drive can take an encoder interface card. This has an input
available for an additional encoder, thus offering the following advantages:
The ability to connect to third-party motors, which increases the installation's
flexibility
The ability to improve positioning accuracy by reducing the effect of mechanical
backlash thanks to position measurement directly on the machine, and to meet the
requirements of simple applications or complex systems which need a very quick
response or very accurate path following
1
b
b
2
Three cards are available depending on the encoder technology:
Resolver encoder
Encoder with digital output
Encoder with analog output
b
b
VW3 M3 401 encoder card
b
References
3
Description
Technology Power
supply
type
V
Encoder type
Machine
encoder
Encoder interface
card with digital
A/B/I
output
SSI
5
5
VW3 M3 401
–
VW3 M3 402
–
VW3 M3 403
–
12
BISS
5
EnDat 2.2
5
Encoder interface
card with analog 1 Vpp
output
1 Vpp/Hall
5
Hiperface
Weight
kg
c
Resolver card
4
Reference
Motor
encoder
5
12
Connection accessories
Description
Composition
Length
m
Reference
Weight
kg
–
–
AEO CON 011
–
–
1
VW3 M4 701
–
[5 x
(2 x 0.25 mm2)
+
(2 x 0.5 mm2)]
100
VW3 M8 221R1000
Connectors
6
Connector
9-way male SUB-D
For resolver card
Cordset
Cordset equipped with
1 x 15-way high density male
SUB-D connector
For card with digital or analog
output
7
Connecting cable
Cable
for creating cordsets
for encoder interface cards
8
9
10
Presentation:
page 4
28
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
21.000
Lexium 32 motion control
Presentation,
references
Option: encoder cards for Lexium 32M
servo drives
Osicoder® machine encoders for VW3 M3 402 encoder card
Presentation
To meet requirements for machine encoders, Schneider Electric offers the
Osicoder® range of encoders. They connect to the VW3 M3 402 encoder interface
card with digital output.
1
The Osicoder® offer consists of incremental encoders and absolute encoders.
The proposed incremental encoder, with its configurable resolution, satisfies most
requirements for machine encoders with A/B/I output signal.
The proposed absolute encoders are among the most commonly used machine
encoders with SSI interface.
2
PF105184
For more information on the Osicoder® offer, please refer to the “Rotary encoders Osicoder®” catalogue or our website www.schneider-electric.com.
Ø 58 mm incremental encoder
Operating on the principle of in-line differential optical reading, XCC incremental
encoders are extremely rugged, thanks to their technology based on photo-sensitive
cells and their triple light source.
The cyclic ratio is maintained even in the event of:
Failure of one of the sender components
Reduced efficiency of the sender components (up to 30%)
Deposit of fine dust on the optical elements
3
b
b
b
4
Configurable encoder with Ø 10 mm solid shaft
XCC 1510PSM50X incremental encoder
Resolution
5000…80,000
points
Type of
connection
Type of
output
stage
Supply
voltage
Male M23 radial 5 V, RS 422 4.75…30 V
connector
Reference
XCC 1510PSM50X
Weight
kg
0.465
5
Note: XCC incremental encoders can also be used as a master encoder on Lexium 32C and
Lexium 32M servo drives, when connected to the PTI input.
PF105173
Ø 58 mm absolute encoders
An absolute encoder continuously delivers a code which is the image of the actual
position of the moving part to be controlled. On the first power-up or on return of the
power after a power failure, the encoder will deliver a data item which can be used
directly by the processing system.
Resolution
Type of
connection
Type of
output
stage
Supply
voltage
Reference
Weight
kg
Single turn encoder with Ø 10 mm solid shaft
8192 points
XCC 2510PS81SBN absolute encoder
Male M23 radial SSI, 13 bits, 11…30 V
connector
binary
6
XCC 2510PS81SBN
0.460
XCC 3510PS84SBN
0.685
7
Multiturn encoder with Ø 10 mm solid shaft
8192 points x
4096 turns
Male M23 radial SSI, 25 bits, 11…30 V
connector
binary
8
9
10
Presentation:
page 4
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
29
Lexium 32 motion control
Presentation,
functions,
references
Option: safety card for Lexium 32M
servo drives
Presentation
1
n
The eSM safety card allows Lexium 32 servo drives to access additional safety
functions, as well as the “Safety Torque Off” (STO) function, thus putting in place a
complex safety device, while ensuring reliable monitoring of the installation.
Servo motor speed
Controlled braking
2
The eSM card optimizes the overall cost of the installation by avoiding the addition
of external safety products, while conforming to international safety standards. As a
result, wiring is cheaper and quicker.
0
It also improves performance during maintenance by reducing machine or
installation downtime and increases the safety of any work carried out.
SS1
activation
STO
activation
(zero torque)
t (s)
The eSM card complies with the machinery standard ISO 13849-1, performance
level “e” (PL e), functional safety standard IEC/EN 61508, SIL 3
capability, and functional safety standard IEC/EN 62061,
SIL 3 capability.
Activation of the “Safe Stop 1” (SS1) safety function
3
It includes safety functions compliant with standard IEC/EN 61800-5-2.
These functions, required in the majority of applications, are as follows:
“Safe Torque Off” (STO)
“Safe Stop 1” (SS1)
“Safe Stop 2” (SS2)
“Safe Limited Speed” (SLS)
“Safe Operating Stop” (SOS)
b
n
Controlled braking
Servo motor speed
b
4
b
b
b
Safety functions
0
SS2
activation
SOS
activation
(maximum torque)
t (s)
Activation of the “Safe Stop 2” (SS2) safety function
5
n
“Safe Stop 2” (SS2) safety function
The SS2 safety function is used to achieve a category 2 safe stop. After activation of
the function, the servo motor is braked in a controlled manner, maintaining the
power on the actuators. Once the motor has come to a halt, it is kept at a standstill
with the “Safe Operating Stop” (SOS) function.
Controlled braking
Configured maximum
speed
6
0
7
“Safe Stop 1” (SS1) safety function
The SS1 safety function is used to achieve a category 1 safe stop.
After activation of the function, the servo motor is braked in a controlled manner,
maintaining the power on the actuators. The power is then cut when the actuators
stop after the machine has come to a halt.
“Safe Limited Speed” (SLS) safety function
The SLS safety function is used to monitor the configured maximum speed. If this
speed is exceeded, the servo motor will be stopped in accordance with SS2.
SS2
activation
SOS
activation
t (s)
Activation of the “Safe Limited Speed” (SLS) safety function
“Safe Operating Stop” (SOS) safety function
The SOS safety function is used to monitor any deviation from the standstill
position, once the servo motor has come to a halt.
PF080921
References
Description
8
9
VW3 M3 501 safety card
10
30
Power supply
Cable
length
V
m
Unit
reference
Weight
kg
eSM safety card for
Lexium 32M servo drives
24
(min. 19,
max. 30)
–
VW3 M3 501
–
Cordset
preassembled with a 24-way
female connector
(safety card end) and
a free end
–
1.5
VW3 M8 802R15
–
3
VW3 M8 801R30
–
Cordset
–
preassembled with 2 x 24-way
female connectors
3
VW3 M8 802R30
–
eSM distribution unit
equipped with 5 connectors
–
–
VW3 M8 810
–
Removable connector for
connecting an additional
eSM distribution unit
Sold in lots of 4
–
–
VW3 M8 820
–
c
Lexium 32 motion control
Presentation,
reference
Option: I/O extension card for Lexium 32M
servo drives
Presentation
PF110930
Lexium 32M servo drives can be adapted for more complex or more extensive
applications by installing an I/O extension card.
1
It has the same functions as the Lexium 32M servo drive I/O.
The I/O extension card is inserted into a dedicated slot (port no. 1).
It is compatible with servo drives supporting version V01.06 minimum.
The card has logic and analog I/O:
4 x 24 V positive logic (Source) or negative logic (Sink) inputs
2 positive logic (Source) or negative logic (Sink) open collector outputs
2 software-configurable voltage (0...10 V ) or current (0...20 mA) analog inputs,
14-bit resolution
2 software-configurable voltage (0...10 V ) or current (0...20 mA) analog outputs,
12-bit resolution.
b
2
c
b
b
c
b
c
VW3 M3 302 I/O expansion card
3
Reference
Description
I/O extension card
for Lexium 32M servo drives
Type of I/O
Type of
connection
Logic
input
Logic
output
Analog
input
Analog
output
4
2
2
2
Reference
Weight
kg
Spring terminals
VW3 M3 302
4
0.400
5
6
7
8
9
10
Presentation:
page 4
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
31
Lexium 32 motion control
Presentation,
references
Option: braking resistors for servo drives
Presentation
Internal braking resistor
A braking resistor is built into the servo drive to absorb the braking energy. If the DC bus voltage in the servo drive
exceeds a specified value, this braking resistor is activated. The restored energy is converted into heat by the
braking resistor.
It enables maximum transient braking torque.
1
External braking resistor
When the servo motor has to be braked frequently, an external braking resistor must be used to dissipate the
excess braking energy. In this case, the internal braking resistor must be deactivated.
2
Several external braking resistors can be connected in parallel.
The servo drive monitors the power dissipated in the braking resistor.
The degree of protection of the casing is IP 65 for VW3 A7 601 R to VW3 A7 608 R
IP 20 for VW3 A7 70 braking resistors.
The operating temperature around the unit can be between 0 and + 50°C.
p
3
p
p
p
braking resistors and
p
To optimize the size of the braking resistor, the DC buses on Lexium 32 servo drives in the same installation can
be connected in parallel (see 20).
Applications
Machines with high inertia, driving loads and machines with fast cycles.
4
PF106005
References
Ohmic
value
5
VW3 A7 60 R
p
Ω
W
10
400
Peak energy EPk
115 V
230 V
380 V
480 V
Weight
Ws
Ws
Ws
Ws
m
18,800
13,300
7300
7700
0.75
VW3 A7 601 R07
1.420
2
VW3 A7 601 R20
1.470
3
VW3 A7 601 R30
kg
1.620
36,500
36,500
22,500
22,500
–
VW3 A7 705
11.000
15
1000
43,100
43,100
26,500
26,500
–
VW3 A7 704
11.000
27
100
4200
3800
1900
1700
0.75
VW3 A7 602 R07
0.630
2
VW3 A7 602 R20
0.780
3
VW3 A7 602 R30
0.900
0.75
VW3 A7 603 R07
0.930
2
VW3 A7 603 R20
1.080
3
VW3 A7 603 R30
1.200
0.75
VW3 A7 604 R07
1.420
2
VW3 A7 604 R20
1.470
3
VW3 A7 604 R30
1.620
0.75
VW3 A7 605 R07
0.620
2
VW3 A7 605 R20
0.750
3
VW3 A7 605 R30
0.850
0.75
VW3 A7 606 R07
0.930
2
VW3 A7 606 R20
1.080
3
VW3 A7 606 R30
1.200
0.75
VW3 A7 607 R07
1.420
2
VW3 A7 607 R20
1.470
3
VW3 A7 607 R30
1.620
0.75
VW3 A7 608 R07
0.410
2
VW3 A7 608 R20
0.560
3
VW3 A7 608 R30
0.760
9700
7400
4900
4300
7
400
72
100
200
25,500
5500
14,600
18,100
3700
9600
11,400
2500
6600
10,500
2300
6000
VW3 A7 70
p
400
9
100
10
Reference
1000
200
8
Length
of connection
cable
p
PF105659
6
p
Continuous
power
PPr
100
36,600
4400
24,700
4400
16,200
2900
15,500
2900
Note: The total continuous power dissipated in the external braking resistor(s) must be less than or equal to the nominal power of
the Lexium 32 servo drive (see pages 14 and 15).
Presentation:
page 4
32
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
Lexium 32 motion control
Presentation,
references
Option: line chokes for servo drives
Presentation
A line choke can be used to provide improved protection against overvoltages on the
line supply and to reduce harmonic distortion of the current produced by the servo
drive.
L1
L2
Line choke
M1
3
Lexium 32
1
L3
The recommended chokes limit the line current.
They have been developed in line with standard IEC 61800-5-1 (VDE 0160 level 1
high-energy overvoltages on the line supply).
2
The inductance values are defined for a voltage drop between 3% and 5% of the
nominal line voltage. Values higher than this will cause loss of torque.
These chokes must be installed upstream of the servo drive.
One line choke can be connected to a number of servo drives. In such cases, the
current consumption of all the servo drives at nominal voltage must not exceed the
nominal current of the line choke.
The use of line chokes is recommended in particular under the following
circumstances:
Close connection of several servo drives in parallel
Line supply with significant disturbance from other equipment (interference,
overvoltages)
Line supply with voltage unbalance between phases that is more than 1.8% of the
nominal voltage
Servo drive supplied by a line with very low impedance (in the vicinity of a power
transformer 10 times more powerful than the servo drive rating)
Installation of a large number of servo drives on the same line
Reduction of overloads on the cos ϕ correction capacitors, if the installation
includes a power factor correction unit.
3
b
b
b
b
4
b
b
References
For
servo drive
Inductance
value
Losses
Line current and THD
Without choke
With choke
mH
W
A
%
A
%
Single-phase supply voltage: 115 V
Reference
Weight
kg
50/60 Hz
a
LXM 32 U45M2
5
20
2.9
173
2.6
85
VZ1 L007UM50
0.880
LXM 32 U90M2
2
30
5.4
159
5.2
90
VZ1 L018UM20
1.990
LXM 32 D18M2
2
30
8.5
147
9.9
74
LXM 32 D30M2
2
30
12.9
135
9.9
72
p
p
p
p
Single-phase supply voltage: 230 V
a
5
20
2.9
181
3.4
100
VZ1 L007UM50
0.880
LXM 32 U90M2
2
30
4.5
166
6.3
107
VZ1 L018UM20
1.990
LXM 32 D18M2
2
30
8.4
148
10.6
93
LXM 32 D30M2
2
30
12.7
135
14.1
86
VW3 A4 553
3.500
VW3 A4 554
6.000
VW3 A4 553
3.500
VW3 A4 554
6.000
p
p
p
Three-phase supply voltage: 380 V
a
2
75
1.4
187
1.9
106
LXM 32 D12N4
2
75
3
174
3.5
88
LXM 32 D18N4
1
90
5.5
159
7.2
88
LXM 32 D30N4
1
90
8.7
146
11.6
74
LXM 32 D72N4
1
90
18.1
124
23.5
43
p
p
p
p
Three-phase supply voltage: 480 V
a
50/60 Hz
LXM 32 U60N4
2
75
1.2
201
1.6
116
LXM 32 D12N4
2
75
2.4
182
2.9
98
LXM 32 D18N4
1
90
4.5
165
6
98
LXM 32 D30N4
1
90
7
152
9.6
85
LXM 32 D72N4
1
90
14.6
129
19.5
55
p
p
p
p
p
7
50/60 Hz
LXM 32 U60N4
p
6
50/60 Hz
LXM 32 U45M2
p
5
8
9
10
Presentation:
page 4
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
33
Lexium 32 motion control
Presentation
Integrated EMC filters and additional
EMC input filters for servo drives
Integrated EMC filter
L1
M1
3
L2
1
Lexium 32
Function
Lexium 32 servo drives have integrated radio interference input filters to comply with
the EMC standard for variable speed electrical power drive “products”
IEC/EN 61800-3, edition 2, category C3 in environment 2, and to comply with the
European directive on EMC (electromagnetic compatibility).
L3
Lexium 32 servo drive
with integrated EMC filter
For servo drive
Maximum servo motor cable length conforming to
EN 55011, class A, Gr2
IEC/EN 61800-3, category C3 in environment 2 (1)
2
Switching frequency: 8 kHz
m
L1
Single-phase supply voltage: 115 V
L2
3
Additional
EMC filter
L3
Lexium 32
M1
3
LXM 32
p
p
p
p
M2
Single-phase supply voltage: 230 V
LXM 32
Lexium 32 servo drive
with additional EMC filter
p
p
p
p
M2
4
p
p
p
p
N4
p
p
p
p
N4
50/60 Hz
a
50/60 Hz
20
Three-phase supply voltage: 480 V
LXM 32
a
20 (10 metres in category C2, environment 1)
Three-phase supply voltage: 380 V
LXM 32
50/60 Hz
a
20 (10 metres in category C2, environment 1)
a
50/60 Hz
20
PF080930
Additional EMC input filters
Applications
Used with Lexium 32 servo drives, additional EMC input filters can be used to meet
more stringent requirements and are designed to reduce conducted emissions on
the line supply below the limits of standard IEC/EN 61800-3 edition 2, category C2
or C3 (see page 35).
5
Additional EMC filters are mounted on the side of the device. They have tapped
holes for mounting in an enclosure.
6
Use according to the type of line supply
Integrated or additional EMC filters can only be used on TN (neutral connection) or
TT (neutral to earth) systems.
Lexium 32 servo drives cannot be used on IT (impedance earthed or isolated
neutral) systems. Standard IEC/EN 61800-3, appendix D2.1, states that on IT
systems, filters can cause permanent insulation monitors to operate in a random
manner.
7
If a machine has to be installed on an IT system, an isolation transformer must be
inserted in order to re-create a TT system on the secondary side.
Additional EMC filter mounted on a
Lexium 32M servo drive
(1) Standard IEC/EN 61800-3: EMC immunity and conducted and radiated EMC emissions:
- Category C3 in environment 2: industrial premises.
Presentation:
page 4
Servo drive/motor
combinations: page 8
8
9
10
34
Servo drives:
page 14
BMH servo motors:
page 42
BSH servo motors:
page 54
Lexium 32 motion control
References
PF095115
Option: additional EMC input filters for servo drives
References
For
servo drive
Maximum servo motor shielded cable
length conforming to
EN 55011
class A Gr1
EN 55011
class A Gr2
IEC/EN 61800-3
category C2 (1)
in environment 1
IEC/EN 61800-3
category C3 (1)
in environment 2
Switching
frequency 8 kHz
Switching
frequency 8 kHz
m
m
Reference
Weight
kg
1
2
Single-phase supply voltage
LXM 32 U45M2
LXM 32 U90M2
50
100
VW3 A4 420
0.600
LXM 32 D18M2
LXM 32 D30M2
50
100
VW3 A4 421
0.775
p
p
p
VW3 A4 422
3
p
Three-phase supply voltage
U60N4
D12N4
D18N4
D30N4
50
100
VW3 A4 422
0.900
LXM 32 D72N4
50
100
VW3 A4 423
1.350
LXM 32
LXM 32
LXM 32
LXM 32
p
p
p
p
p
4
(1) Standard IEC/EN 61800-3: EMC immunity and conducted and radiated EMC emissions:
- Category C2 in environment 1: restricted distribution, for domestic use, sale conditional on
the competence of the user and the distributor in terms of reduction of current harmonics
- Category C3 in environment 2: industrial premises.
5
6
7
8
9
10
Presentation:
page 4
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
35
SoMove setup software
Presentation,
functions
Presentation
SoMove is user-friendly setup software for PC designed for configuring the following
Schneider Electric motor control devices:
ATV 12, ATV 312, ATV 31, ATV 32, ATV 61 and ATV 71 drives
ATS 22 starters
TeSys U starter-controllers
TeSys T motor management system
Lexium 32 servo drives
1
b
b
b
b
b
2
SoMove software incorporates various functions for the device setup phases, such
as:
Configuration preparation
Start-up
Maintenance
b
SoMove start page
b
b
To facilitate setup and maintenance, SoMove software can use a direct USB/RJ45
cable link or a Bluetooth® wireless link.
SoMove software is also compatible with the Multi-Loader configuration tool and
SoMove Mobile software for mobile phones.
These tools can save a significant amount of time when loading, duplicating or
editing configurations on a device.
3
SoMove software and all the DTMs (Device Type Managers) associated with the
devices can be downloaded from our website www.schneider-electric.com.
4
Functions
Configuration preparation in disconnected mode
SoMove software has a genuine disconnected mode which provides access to all
the device parameters. This mode can be used to generate the device configuration.
The configuration can be saved, printed and exported to office automation software.
5
SoMove software also checks the consistency of the parameters, validating the
configurations created in disconnected mode.
Example of connecting SoMove software to an ATV 12 drive
A large number of functions are available in disconnected mode, in particular:
The device configuration software wizard
The configuration comparison function
Saving, copying, printing and creating configuration files for export to MultiLoader, SoMove Mobile or Microsoft Excel® tools, and sending configurations by
e-mail
b
b
6
b
Setup
When the PC is connected to the device, SoMove software can be used for:
Transferring the generated configuration onto the device
Adjustment and monitoring, which includes such functions as:
The oscilloscope
Display of communication parameters
Easy control via the control panel user interface
Saving the final configuration
7
b
b
v
v
b
b
8
Maintenance
In order to simplify maintenance operations, SoMove software can be used to:
Compare the configuration of a device currently being used with a configuration
saved on the PC
Transfer a configuration to a device
Compare oscilloscope curves
Save oscilloscope curves and faults
b
b
b
b
9
SoMove control panel
10
Presentation:
page 4
36
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
Functions (continued)
SoMove setup software
Functions (continued)
User interface
SoMove software provides fast, direct access to all information on the device via five
tabs:
My Device: Displays all the device information (type, reference, software versions,
option cards, etc.)
Parameters: Displays all the device adjustment parameters, shown in a table or in
the form of diagrams
Faults: Displays a list of the faults that may be encountered with the device, the
fault log and any current faults or alarms
Monitoring: Provides a realtime display of the device status, its I/O and all the
monitoring parameters. It is possible to create your own control panel by selecting
your parameters and how they are to be represented.
Oscilloscope: Provides a high-speed oscilloscope (for recording traces in the
device) or low-speed oscilloscope (for recording traces in the software for devices
that do not have an integrated oscilloscope)
1
b
b
b
b
2
b
SoMove oscilloscope function
SoMove's user interface automatically adapts to the specific configured device by
offering additional tabs:
Safety: For configuring the Safety functions on ATV 32 variable speed drives and
Lexium 32 servo drives. It can also be used to:
Display the I/O
Compile and print a report
ATVLogic: For accessing the ATV 32 drive's programmable function blocks. It can
also be used to:
Develop a program and transfer it to the drive
Display and debug the program already on the drive
Auto-tuning: For accessing the servo control settings for the three different
operating modes of the Lexium 32 servo drive's auto-tuning function:
Automatic mode for quick setup, designed for simple applications
Semi-automatic mode for quick setup, with the option of optimizing the
servo drive/servo motor combination (access to the mechanical and dynamic
behaviour parameters)
Expert mode for optimizing the adjustment parameters, designed for complex
applications
3
b
v
v
b
4
v
v
b
v
v
5
v
Connections
6
Modbus serial link
SoMove Safety function
The PC running SoMove software can be connected directly via the RJ45 connector
on the device and the USB port on the PC using the USB/RJ45 cable.
See the product references on page 38.
Bluetooth® wireless link
SoMove software can communicate via Bluetooth® wireless link with any Bluetooth®
enabled device.
7
If the device is not Bluetooth® enabled, use the Modbus-Bluetooth® adaptor. This
adaptor is connected to the terminal port or the Modbus network port on the device. It
has a 20 m range (class 2).
If the PC does not have Bluetooth® technology, use the USB-Bluetooth® adaptor.
8
See the product references on page 38.
9
10
Presentation:
page 4
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
37
SoMove setup software
References
References
Description
1
Reference
Weight
kg
SoMove Lite setup software
(1)
Includes:
SoMove setup software for PC in English, French, German,
Italian, Spanish and Chinese
DTMs (Device Type Managers) and technical
documentation for variable speed drives, starters and servo
motors
–
USB/RJ45 cable
Used to connect a PC to the device.
This cable is 2.5 m long and has a USB connector (PC end)
and an RJ45 connector (device end).
TCSM CNAM 3M002P
–
Modbus/Uni-Telway-Bluetooth® adaptor
Used to enable any non-Bluetooth® device to communicate
via Bluetooth® wireless link (2).
TCSW AAC13FB
0.032
VW3 A8 115
0.290
b
b
2
SoMove setup software
3
Includes:
1 Bluetooth® adaptor (range 20 m, class 2) with an RJ45
connector
For SoMove: 1 x 0.1 m cordset with 2 x RJ45
connectors
For TwidoSuite: 1 x 0.1 m cordset with
1 RJ45 connector and 1 mini DIN connector
b
4
PF100898C
b
b
USB-Bluetooth® adaptor for PC
Used to enable any non-Bluetooth® PC to communicate via
Bluetooth® wireless link (3).
It connects to a USB port on the PC.
Range 10 m, class 2
TCSW AAC13FB:
Bluetooth® adaptor
5
(1) Available on our website www.schneider-electric.com.
(2) Required for the following devices:
- ATV 12, ATV 312, ATV 31, ATV 61 and ATV 71 drives
- ATS 22 starters
- TeSys U starter-controllers
- TeSys T motor management system
- Lexium 32 servo drives
(3) Check the manufacturer's specification.
6
7
8
9
10
Presentation:
page 4
38
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
SoMove setup software
Compatibility
Compatibility of SoMove software with specific devices
Device
Variable speed drive
Range
ATV 12, ATV 312, ATV32
ATV 31
ATV 61, ATV 71
Starter
ATS 22
Starter-controller
TeSys U
Motor management system
TeSys T
Servo drive
Lexium 32
Version of software on
the device
u
u
u
u
u
u
u
1
1.0
1.1
1.6
1.0
2
1.0
1.0
1.0
Environments
SoMove operates in the following PC environments and configurations:
Microsoft Windows® 7 Professional (1)
Microsoft Windows® XP Professional SP3
Microsoft Windows® Vista Business SP2
Pentium IV (or equivalent), 1 GHz, hard disk with 1 GB available space, 1 GB of
RAM (minimum configuration)
3
b
b
b
b
4
(1) Please contact our Customer Care Centre.
5
6
7
8
9
10
Presentation:
page 4
Servo drives:
page 14
Servo drive/motor
combinations: page 8
BMH servo motors:
page 42
BSH servo motors:
page 54
39
Lexium 32 motion control
Combinations
Motor starters
Applications
The combinations listed below can be used to create a complete motor starter unit
comprising a contactor and a Lexium 32 servo drive.
The contactor turns on and manages any safety features, as well as isolating the
servo motor on stopping.
The servo drive controls the servo motor, provides protection against short-circuits
between the servo drive and the servo motor and protects the motor cable against
overloads. The overload protection is provided by the motor thermal protection of the
servo drive.
Motor starters for Lexium 32 servo drives
Servo drive
Reference
Max. prospective
line Isc
Nominal power
kW
kA
Single-phase supply voltage:
0,15
1
LC1 D09
0,3
1
LC1 D09
LXM 32 D18M2
0,5
1
LC1 D12
LXM 32 D30M2
0,8
1
LC1 D18
p
p
Single-phase supply voltage:
1
LC1 D09
LXM 32 U90M2
0,5
1
LC1 D09
LXM 32 D18M2
1
1
LC1 D12
LXM 32 D30M2
1,6
1
LC1 D18
p
p
Three-phase supply voltage:
a
0,4
5
LC1 D09
LXM 32 D12N4
0,9
5
LC1 D09
LXM 32 D18N4
1,8
5
LC1 D09
LXM 32 D30N4
3
5
LC1 D12
LXM 32 D72N4
7
5
LC1 D25
p
p
p
p
Three-phase supply voltage:
a
0,4
5
LC1 D09
LXM 32 D12N4
0,9
5
LC1 D09
LXM 32 D18N4
1,8
5
LC1 D09
LXM 32 D30N4
3
5
LC1 D12
LXM 32 D72N4
7
5
LC1 D25
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
480 V 50/60 Hz
LXM 32 U60N4
p
p
p
400 V 50/60 Hz
LXM 32 U60N4
p
p
200…240 V 50/60 Hz
0,3
p
p
a
LXM 32 U45M2
p
p
100…120 V 50/60 Hz
LXM 32 U90M2
p
LC1 D18
+
LXM 32MD30M2
a
LXM 32 U45M2
p
+
Contactor
Reference (1) (2)
(1) Composition of contactors:
LC1 D : 3 poles + 1 “NO” auxiliary contact and 1 “N/C” auxiliary contact.
In certain solutons, it is possible to use an LC1 K contactor with 1 “N/C” auxiliary contact.
Please refer to the “Control and protection components” catalogue.
(2) Replace
with the control circuit voltage reference given in the table below:
p
p
p
p
Volts
LC1 D
p
p
24
48
110
220/230
230
50 Hz
B5
E5
F5
M5
P5
U5
50 Hz
B6
E6
F6
M6
–
U6
50/60 Hz
B7
E7
F7
M7
P7
U7
a
230/240
For other available voltage between 24 and 660 V, or for a DC control circuit, please consult
your customer care centre.
Presentation:
page 4
40
Servo drives:
page 14
Servo drive/motor
combinations: page 8
Options:
page 28
Combinations (continued)
Lexium 32 motion control
Motor starters
Protection using fuses
Protection using class J fuses (UL certification)
Servo drive
Reference
Fuse to be placed upstream
Nominal power
kW
A
Single-phase supply voltage:
LXM 32 U45M2
0,15
4
0,3
6
LXM 32 D18M2
0,5
10
LXM 32 D30M2
0,8
15
p
p
p
Single-phase supply voltage:
a
200…240 V 50/60 Hz
LXM 32 U45M2
0,3
LXM 32 U90M2
0,5
6
LXM 32 D18M2
1
10
LXM 32 D30M2
1,6
15
p
p
p
p
Three-phase supply voltage:
4
a
400 V 50/60 Hz
LXM 32 U60N4
0,4
2
LXM 32 D12N4
0,9
4
LXM 32 D18N4
1,8
8
LXM 32 D30N4
3
10
LXM 32 D72N4
7
20
p
p
p
p
p
Three-phase supply voltage:
a
480 V 50/60 Hz
LXM 32 U60N4
0,4
2
LXM 32 D12N4
0,9
3
LXM 32 D18N4
1,8
8
LXM 32 D30N4
3
10
LXM 32 D72N4
7
20
p
p
p
p
p
Servo drives:
page 14
100…120 V 50/60 Hz
LXM 32 U90M2
p
Presentation:
page 4
a
Servo drive/motor
combinations: page 8
Options:
page 28
41
Lexium 32 motion control
Presentation
569429
569427
BMH servo motors
Presentation
BMH servo motors provide unequalled power density values to meet the
requirements of most compact machines. With four flange sizes and three different
lengths for each flange size, they are suitable for most applications, covering a
continuous stall range from 1.2 to 84 Nm for speeds up to 8000 rpm.
BMH servo motor with
straight connectors
BMH servo motor with
rotatable angled
connectors
With their medium inertia motor, the new BMH servo motors are ideal for high-load
applications and enable more robust adjustment of the movement, making for easier
installation and adjustment.
They are certified as “Recognized”
by the Underwriters Laboratories and conform
to UL 1004 standards as well as to European directives ( marking).
e
They are available with the following variants:
5 flange sizes: 70, 100, 140, 190 and 205 mm
2 degrees of protection for the shaft end: IP 50 or IP 65 (IP 67 with the conformity
kit, which is available as an option) in accordance with standard IEC/EN 60529. The
degree of protection of the casing is IP 65 (IP 67 with the conformity kit, which is
available as an option)
With or without holding brake
Straight or angled connectors for power and encoder connection
Integrated SinCos Hiperface® single turn or multiturn encoder (medium or high
resolution)
Untapped or keyed shaft end
b
b
b
b
b
b
Special features
BMH servo motors have been developed to comply with the following main
specifications:
The ambient operating temperature is - 20...+ 40°C without derating, in
accordance with standard IEC 60721-3-3, category 3K3, and up to 55°C with
derating of 1% of the nominal output power per additional °C above 40°C.
b
The maximum operating altitude is 1000 m without derating, 2000 m with
k = 0.86 and 3000 m with k = 0.8 (1).
The relative humidity that the servo motor can withstand is in line with standard
IEC 60721-3-3, catégories 3K3, 3Z12 et 3Z2.
b
The windings are insulation class F (maximum temperature for windings 155°C) in
accordance with standard IEC 60034-1.
b
The thermal protection is provided and controlled by the Lexium 32 servo drive via
the motor temperature control algorithm.
b
All mounting positions are permitted (horizontal mounting (IMB5) or vertical
mounting (IMV1 with shaft end at the top and IMV3 with shaft end at the bottom) in
accordance with standard IEC 60034-7.
b
Sizing
The Lexium Sizer sizing tool is available on our website www.schneider-electric.com
to help you size your servo motor.
(1) k: derating factor.
Servo drives:
page 14
42
BMH servo motors:
page 44
Options:
page 48
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
Presentation (continued),
description
Lexium 32 motion control
BMH servo motors
Presentation (continued)
Holding brake
BMH servo motors can be equipped with a failsafe electromagnetic holding brake.
Do not use the holding brake as a dynamic brake for deceleration, as this
will quickly damage the brake.
Integrated encoder
BMH servo motors are equipped as standard with an absolute encoder.
This encoder performs the following functions:
Gives the absolute position of the motor so that flows can be synchronized
Measures the servo motor speed via the associated Lexium 32 servo drive. This
information is used by the servo drive's speed controller
Measures the position information for the servo drive's position controller
Sends data from the servo motor to the servo drive, which ensures automatic
identification of the motor when the servo drive starts
b
b
b
b
Four types of encoder are available:
High resolution SinCos Hiperface® encoder:
Single turn (131,072 points/turn) (1) or
Multiturn (131,072 points/turn x 4096 turns) (1),
ensuring angular precision of the shaft position, accurate to less than ± 1.3 arc
minutes
Medium resolution SinCos Hiperface® encoder:
Single turn (32,768 points/turn) (1) or
Multiturn (32,768 points/turn x 4096 turns) (1),
ensuring angular precision of the shaft position, accurate to less than ± 4.8 arc
minutes.
b
v
v
b
v
v
Description
4
5
1
2
3
BMH servo motors, with a three-phase stator and a 10-pole rotor with Neodymium
Iron Boron (NdFeB) magnets, consist of:
1 A casing protected by opaque RAL 9005 black paint
2 A 4-point axial fixing flange
3 A keyed or untapped shaft end (depending on the model)
4 A threaded dust and damp proof male straight connector for connecting the
power cable (2)
5 A threaded dust and damp proof male straight connector for connecting the
control cable (encoder) (2)
Cables and connectors to be ordered separately, for connection to Lexium 32
servo drives (see page 46).
Schneider Electric has taken particular care to ensure compatibility between BMH
servo motors and Lexium 32 servo drives.
This compatibility can only be assured by using cables and connectors sold by
Schneider Electric (see page 46).
(1) Encoder resolution given for use with a Lexium 32 servo drive.
(2) Other model with rotatable angled connector (see page 44).
Servo drives:
page 14
BMH servo motors:
page 44
Options:
page 48
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
43
Lexium 32 motion control
References
569430
BMH servo motors
BMH servo motors
The BMH servo motors shown below are supplied without a gearbox.
For GBX and GBY gearboxes see pages 51 and 52.
Continuous
stall torque
Peak
stall
torque
Nm
Nominal
servo motor
output power
W
rpm
Maximum
mechanical
speed
rpm
1.2
4.2
350
3000
8000
1.4
4
450
4000
8000
4.2
350
2500
8000
700
5000
8000
6.4
600
2500
8000
7.4
900
4000
8000
700
3000
8000
8.7
650
2000
8000
10.2
900
3000
8000
1300
5000
8000
Nm
Front of the
BMH 070
p
p
p
p
1A
p
2.5
569431
3.4
3.3
10.8
800
4000
6000
3.4
8.9
700
2000
6000
10.8
900
3000
6000
1300
4000
6000
10.3
750
2000
6000
18.4
1450
3000
6000
6
Front of the
BMH 100
p
p
p
p
1A
569432
p
Nominal
speed
5.9
18.4
1600
4000
6000
8
23.5
1450
2500
5000
8.4
25.1
2600
4000
5000
10.3
30.8
1450
1500
4000
2400
3000
4000
16.8
50.3
3800
3000
4000
24
71.8
4500
3000
4000
30
77.7
4800
2500
4000
37.4
101
5900
2500
4000
43.2
123
5700
1500
3500
84
232
6500
1200
3800
Associated Reference
LXM 32 servo (1)
drive
Weight
(2)
kg
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
U60N4
BMH 0701P
U90M2
BMH 0701T
D18M2
BMH 0701T
D12N4
BMH 0701P
D30M2
BMH 0702T
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
A
1.600
A
1.600
A
1.600
A
1.600
A
1.800
A
1.800
A
2.000
D18M2
D12N4
BMH 0702P
D30M2
BMH 0703T
D18M2
BMH 0703T
D18N4
BMH 0703P
D12N4
BMH 1001P
D30M2
BMH 1001T
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
A
2.000
A
2.000
A
3.340
A
3.340
D18M2
D18N4
BMH 1001P
D30M2
BMH 1002T
p
p
p
p
p
p
p
p
A
3.340
A
4.920
A
4.920
D30M2
D18N4
BMH 1002P
D30M2
BMH 1003T
D30N4
BMH 1003P
D30M2
BMH 1401P
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
A
6.500
A
6.500
A
8.000
A
12.000
A
16.000
A
19.000
A
31.000
A
43.000
A
67.000
D30N4
D72N4
BMH 1402P
D72N4
BMH 1403P
D72N4
BMH 1901P
D72N4
BMH 1902P
D72N4
BMH 1903P
D72N4
BMH 2053P
To order a BMH servo motor, complete each reference above with:
Shaft end
IP 54
IP 65/IP 67 (4)
Front of the
BMH 1401P
p
p
p
1A
Integrated sensor
High resolution,
optical
110929
Integrated sensor
Medium resolution,
capacitive
Holding brake
Connections
Flange
Rear view of the
2A
BMH 1901P
p
p
p
p
p
p
p
1
Multiturn, SinCos Hiperface®
131,072 points/turn x 4096 turns (5)
128 sine/cosine periods per turn
2
Single turn, SinCos Hiperface®
32,768 points/turn (5)
16 sine/cosine periods per turn
6
Multiturn, SinCos Hiperface®
32,768 points/turn x 4096 turns (5)
16 sine/cosine periods per turn
7
Without
A
With
F
Straight connectors (3)
1
Rotatable right-angled connectors
2
International standard
A
0
1
2
3
Single turn, SinCos Hiperface®
131,072 points/turn (5)
128 sine/cosine periods per turn
A
Note: The example above is for a BMH 0701P servo motor. For other servo motors, replace BMH 0701P with the relevant reference.
(1) To complete each reference see the table above.
(2) Weight of servo motor without brake, no packaging. To obtain the weight of the servo motor with holding brake, please visit our
website www.schneider-electric.com.
(3) Not available for BMH 190 servo motors.
(4) IP 67 with the VW3 M2 30 IP 67 conformity kit supplied as an option (see opposite page).
(5) Sensor resolution given for use with a Lexium 32 servo drive.
p
44
BMH 0701P
Untapped (3)
Keyed (3)
Untapped
Keyed
References (continued)
Lexium 32 motion control
BMH servo motors
BMH servo motors (continued)
Dimensions (overall)
Servo motors
Flange
W x H x D (1)
Without holding brake
With holding brake
mm
mm
70 x 70
70 x 109.5 x 122
70 x 109.5 x 161
70 x 70
70 x 109.5 x 154
70 x 109.5 x 193
70 x 70
70 x 109.5 x 186
70 x 109.5 x 225
100 x 100
100 x 139.5 x 128
100 x 139.5 x 170
100 x 100
100 x 139.5 x 160
100 x 139.5 x 202
100 x 100
100 x 139.5 x 192
100 x 139.5 x 234
BMH 1401P
140 x 140
140 x 179.5 x 152
140 x 179.5 x 187
BMH 1402P
140 x 140
140 x 179.5 x 192
140 x 179.5 x 227
BMH 1403P
140 x 140
140 x 179.5 x 232
140 x 179.5 x 267
BMH 1901P
190 x 190
190 x 257 x 190
190 x 257 x 248
BMH 1902P
190 x 190
190 x 257 x 250
190 x 257 x 308
BMH 1903P
190 x 190
190 x 257 x 310
190 x 257 x 368
BMH 2053P
205 x 205
205 x 259(2) x 489
205 x 259(2) x 538.5
BMH 0701
BMH 0702
BMH 0703
BMH 1001
BMH 1002
BMH 1003
p
p
p
p
p
p
IP 67 conformity kits
PF080922
This kit can be used to ensure IP 67 degree of protection. It is fitted in place of the rear motor rating plate.
Description
IP 67 conformity kits
(supplied as an option)
For use with
Reference
BMH 070
VW3 M2 301
0.100
VW3 M2 302
0.150
VW3 M2 303
0.300
(3)
0.003
VW3 M2 304
0.750
BMH 100
BMH 140
BMH 190
VW3 M2 30
p
BMH 205
p
p
p
p
p
p
p
p
p
p
Weight
kg
(1) D: motor length (excluding shaft end).
(2) Height of the servo motor equipped with straight connectors. The height is 265 mm when the servo motor is equipped with
rotatable angled connectors.
(3) IP 67 conformity kit sold by Festo AG under reference QSML-B-M3-4-20.
Presentation:
page 42
Options:
page 48
Servo drives:
page 14
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
45
References (continued)
Lexium 32 motion control
BMH servo motors
Connection components
Power cordsets
Description
Cordsets equipped with one
M23 industrial connector
(servo motor end)
VW3 M5 10 R
p
p
p
From servo
motor
To servo drive
BMH 070
BMH 100
BMH 1401P
LXM 32
. [(4 x 1.5 mm2)
See combinations +
on pages 8
(2 x 1 mm2)]
to 13
p
p
p
p
p
p
p
p
p
Composition
p
p
BMH 1402P
BMH 1403P
Cordsets equipped with one
M40 industrial connector
(servo motor end)
LXM 32 D72N4
p
[(4 x 2.5 mm2)
+
(2 x 1 mm2)]
Length
Reference
m
1.5
VW3 M5 101 R15
Weight
kg
0.600
3
VW3 M5 101 R30
0.810
5
VW3 M5 101 R50
1.210
10
VW3 M5 101 R100
2.290
15
VW3 M5 101 R150
3.400
20
VW3 M5 101 R200
4.510
25
VW3 M5 101 R250
6.200
50
VW3 M5 101 R500
12.325
75
VW3 M5 101 R750
18.450
3
VW3 M5 102 R30
1.070
5
VW3 M5 102 R50
1.670
10
VW3 M5 102 R100
3.210
15
VW3 M5 102 R150
4.760
20
VW3 M5 102 R200
6.300
25
VW3 M5 102 R250
7.945
50
VW3 M5 102 R500
16.170
75
VW3 M5 102 R750
24.095
E type mounting with open cable ducts, conforming to standard EN 60204-1
BMH 1901P
BMH 2053P
BMH 1902P
BMH 1903P
LXM 32 D72N4
p
LXM 32 D72N4
p
[(4 x 4 mm2)
+
(2 x 1 mm2)]
[(4 x 6 mm2)
+
(2 x 1 mm2)]
3
VW3 M5 103 R30
2.000
5
VW3 M5 103 R50
3.400
10
VW3 M5 103 R100
6.500
15
VW3 M5 103 R150
9.500
20
VW3 M5 103 R200
12.100
25
VW3 M5 103 R250
15.500
50
VW3 M5 103 R500
30.300
75
VW3 M5 103 R750
45.000
3
VW3 M5 105 R30
2.000
5
VW3 M5 105 R50
3.400
10
VW3 M5 105 R100
6.500
15
VW3 M5 105 R150
9.500
20
VW3 M5 105 R200
12.100
25
VW3 M5 105 R250
15.500
50
VW3 M5 105 R500
30.300
75
VW3 M5 105 R750
45.000
B2 type mounting, in conduits or distribution trunking, conforming to standard EN 60204-1
BMH 1901P
BMH 2053P
BMH 1902P
BMH 1903P
Presentation:
page 42
46
Options:
page 48
Servo drives:
page 14
LXM 32 D72N4
p
LXM 32 D72N4
p
[(4 x 6 mm2)
+
(2 x 1 mm2)]
[(4 x 10 mm2)
+
(2 x 1 mm2)]
BSH servo motors:
page 54
3
VW3 M5 105 R30
2.000
5
VW3 M5 105 R50
3.400
10
VW3 M5 105 R100
6.500
15
VW3 M5 105 R150
9.500
20
VW3 M5 105 R200
12.100
25
VW3 M5 105 R250
15.500
50
VW3 M5 105 R500
30.300
75
VW3 M5 105 R750
45.000
3
VW3 M5 104 R30
3.600
5
VW3 M5 104 R50
5.600
10
VW3 M5 104 R100
10.500
15
VW3 M5 104 R150
15.500
20
VW3 M5 104 R200
20.300
25
VW3 M5 104 R250
24.500
50
VW3 M5 104 R500
49.700
75
VW3 M5 104 R750
74.200
Servo drive/motor
combinations: page 8
References (continued)
Lexium 32 motion control
BMH servo motors
Connection components (continued)
Control cordsets
VW3 M8 102 R
p
p
Description
For use with
To servo
drive
SinCos Hiperface®
encoder cordsets
equipped with an M23
industrial connector
(servo motor end)
and an RJ45 connector
with 8 + 2 contacts
(servo drive end)
BMH
LXM 32
.
See references on
pages 14
and 15
p
p
p
p
p
p
p
Composition
p
p
p
p
[3 x
(2 x 0.14 mm2)
+
(2 x 0.34 mm2)]
p
Length
Reference
m
1.5
VW3 M8 102 R15
Weight
kg
0.400
3
VW3 M8 102 R30
0.500
5
VW3 M8 102 R50
0.600
10
VW3 M8 102 R100
0.900
15
VW3 M8 102 R150
1.100
20
VW3 M8 102 R200
1.400
25
VW3 M8 102 R250
1.700
50
VW3 M8 102 R500
3.100
75
VW3 M8 102 R750
4.500
Connectors for creating power and control cordsets
Description
For use with
Sold in
lots of
Item
no.
For
cable
crosssection
mm2
Reference
M23 industrial connector BMH 070 , BMH 100 and
for creating power cordsets BMH 140 P servo motors
5
1
1.5 or
2.5
VW3 M8 215
0.350
M40 industrial connector BMH 1901P (1) and BMH 2053P (1)
for creating power cordsets servo motors
BMH 1901P (2), BMH 1902P (1) (2),
BMH 1903P (1) (2) and
BMH 2053P (2) servo motors
servo drives
RJ45 connector
LXM 32
(CN3 connector)
with 8 + 2 contacts for
creating control cordsets
5
1
4
VW3 M8 217
0.850
5
1
6 or
10
VW3 M8 218
0850
5
2
–
VW3 M2 208
0.200
M23 industrial connector BMH
for creating control
cordsets
5
3
–
VW3 M8 214
0.350
Length
Reference
m
25
VW3 M5 301 R250
50
VW3 M5 301 R500
11.100
100
VW3 M5 301 R1000
22.200
p
p
p
p
p
2
5
4
3
1
Connectors and cables for
connecting the servo motor
p
p
p
p
p
p
p
p
p
p
servo motors
p
Weight
kg
Cables for creating power and control cordsets
Description
Cables for creating
power cordsets
From servo
motor
To servo drive
Composition Item
no.
BMH 070
BMH 100
BMH 1401P
LXM 32
.
See combinations
on pages 8
to 13
[(4 x 1.5 mm2) 4
+
(2 x 1 mm2)]
LXM 32 D72N4
[(4 x 2.5 mm2) 4
+
(2 x 1 mm2)]
p
p
p
p
BMH 1402P
BMH 1403P
BMH 1901P (1)
BMH 2053P (1)
Cables for creating
control cordsets for
SinCos Hiperface®
encoders
p
p
p
p
p
p
p
LXM 32 D72N4
p
BMH 1901P (2)
BMH 1902P (1)
BMH 1903P (1)
BMH 2053P (2)
LXM 32 D72N4
BMH 1902P (2)
BMH 1903P (2)
LXM 32 D72N4
BMH
p
p
p
p
p
p
p
LXM 32
.
See references
on pages 14
and 15
p
p
p
p
p
p
[(4 x 4 mm2)
+
(2 x 1 mm2)]
[(4 x 6 mm2)
+
(2 x 1 mm2)]
4
4
[(4 x 10 mm2) 4
+
(2 x 1 mm2)]
[(3 x
5
(2 x 0.14 mm2)
+
(2 x 0.34 mm2)]
Weight
kg
5.550
25
VW3 M5 302 R250
7.725
50
VW3 M5 302 R500
15.450
100
VW3 M5 302 R1000
30.900
25
VW3 M5 303 R250
9.900
50
VW3 M5 303 R500
19.800
100
VW3 M5 303 R1000
39.600
25
VW3 M5 305 R250
14.750
50
VW3 M5 305 R500
29.500
100
VW3 M5 305 R1000
59.000
25
VW3 M5 304 R250
24.500
50
VW3 M5 304 R500
49.000
100
VW3 M5 304 R1000
98.000
25
VW3 M8 222 R250
1.400
50
VW3 M8 222 R500
2.800
100
VW3 M8 222 R1000
5.600
(1) E type mounting with open cable ducts, conforming to standard EN 60204-1.
(2) B2 type mounting in conduits or distribution trunking, conforming to standard EN 60204-1.
47
Lexium 32 motion control
Presentation,
references
BMH servo motors
Option: Holding brake integrated in servo motor
Holding brake
Presentation
L1
L2
L3
The holding brake integrated in the BMH servo motor is an electromagnetic
pressure spring brake that blocks the servo motor axis once the output current has
been switched off.
c 24 V
Lexium 32
2
HBC
1
Servo drive with integrated
holding brake (HBC)
In the event of an emergency, such as a power outage or an emergency stop, the
drive is immobilized, significantly increasing safety.
Blocking the servo motor axis is also necessary in cases of torque overload, such
as in the event of vertical axis movement.
As standard, the Lexium 32 servo drive has a holding brake controller which
amplifies the braking control signal, ensuring the brake is deactivated quickly. The
controller then reduces the control signal so as to decrease the power dissipated by
the holding brake.
3
Servo motor with
integrated holding brake
4
References
To select a BMH servo motor with or without holding brake, see the references on
page 44.
5
For any additional information about holding brake characteristics, visit our website
www.schneider-electric.com.
6
BMH servo motor
7
8
9
10
Servo drives:
page 14
48
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
Lexium 32 motion control
Presentation,
references
BMH servo motors
Option: Encoder integrated in servo motor
Encoder integrated in BMH servo motor
Presentation
L1
L2
The standard measurement device is the SinCos Hiperface® single turn or multiturn
encoder integrated in BMH servo motors. This measurement device is perfectly
suited to the Lexium 32 range of servo drives.
L3
1
Depending on the model, single turn and multiturn SinCos encoders are available in
medium resolution, with capacitive sensing, or high resolution, with optical sensing.
Lexium 32
2
Use of this interface enables:
Automatic identification of BMH servo motor data by the servo drive
Automatic initialization of the servo drive's control loops, thus simplifying
installation of the motion control device
b
b
E
Servo motor with SinCos
Hiperface® encoder
3
4
References
To select the type of SinCos Hiperface® encoder integrated in the BMH servo motor
(single turn or multiturn), see the references on page 44.
For any additional information about integrated encoder characteristics, visit our
website www.schneider-electric.com.
5
6
BMH servo motor
7
8
9
10
Servo drives:
page 14
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
49
Lexium 32 motion control
Presentation
BMH servo motors
Option: GB planetary gearboxes
PF080936
p
Presentation
In many cases, motion control requires the use of planetary gearboxes to adapt
speeds and torques, while ensuring the precision demanded by the application.
1
Schneider Electric has chosen to use GBX planetary gearboxes and GBY angular
planetary gearboxes (made by Neugart) with the BMH range of servo motors.
The combination of BMH servo motors with the most suitable planetary gearboxes
makes them very easy to mount and ensures simple, risk-free operation.
GBX planetary gearboxes
The gearboxes are designed for applications which are not susceptible to
mechanical backlash. They have a keyed shaft, are lubricated for life and conform
to IP 54 degree of protection.
PF080937
2
Available in 4 sizes (GBX 60...GBX 160), GBX planetary gearboxes are offered in
15 reduction ratios (3:1...100:1).
GBY angular planetary gearboxes are available in 3 sizes (GBY 60…GBY 120)
with 7 reduction ratios (3:1...40:1).
3
The tables on pages 51 and 52 show the most suitable combinations of servo motor
and GBX or GBY planetary gearbox.
For other combinations or any additional information about the characteristics of
planetary gearboxes, see the servo motor data sheets or visit our website
www.schneider-electric.com.
4
The adaptor kit comprises:
An adaptor plate
A shaft end adaptor, depending on the model (depends on the servo motor/
planetary gearbox combination)
Screws and bolts for mounting the plate on the planetary gearbox
Screws and bolts for mounting the servo motor
PF080938
5
A GBK adaptor kit is offered for assembling the BMH servo motor and the
GBX 60…GBX 120 or GBY 60…GBY 120 planetary gearboxes (see page 53).
The GBX 160 planetary gearbox is equipped as standard with an integrated adaptor kit.
GBY angular planetary gearbox
b
b
b
b
+
6
7
PF105616
GBK adaptor kit
8
GBX 160 planetary gearbox
9
10
Servo drives:
page 14
50
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
Lexium 32 motion control
References
BMH servo motors
Option: GBX
p
p
K planetary gearboxes
p
References
PF080936
Size
GBX 60
GBX 80
GBX 120
GBX
p
p
p
p
p
p
K planetary gearbox
GBX 160
Reduction ratio
Reference
3:1, 4:1, 5:1 and 8:1
GBX 060
9:1, 12:1, 15:1, 16:1
GBX 060
3:1, 4:1, 5:1 and 8:1
GBX 080
9:1, 12:1, 15:1, 16:1, 20:1, 25:1, 32:1 and 40:1
GBX 080
3:1, 4:1, 5:1 and 8:1
GBX 120
9:1, 12:1, 15:1, 16:1, 20:1, 25:1, 32:1 and 40:1
GBX 120
60:1, 80:1 and 100:1
GBX 120
8:1
GBX 160
12:1, 15:1, 16:1, 20:1, 25:1, 32:1 and 40:1
GBX 160
p
p
p
p
p
p
p
p
p
Weight
kg
K
0.900
K
1.000
K
2.100
K
2.600
K
6.000
K
8.000
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
K
Size
Casing diameter
Reduction ratio
2
10.000
F
18.000
F
22.000
3
To order a GBX 60…GBX 120 planetary gearbox, complete each reference above as follows:
GBX
1
p
p
p
p
p
p
K
060
080
120
60 mm
80 mm
120 mm
003
004
005
008
009
012
015
016
020
025
032
040
060
080
100
3:1
4:1
5:1
8:1
9:1
12:1
15:1
16:1
20:1
25:1
32:1
40:1
60:1
80:1
100:1
Mounting with GBK adaptor kit
(see page 53)
4
5
6
K
To order a GBX 160 planetary gearbox, complete each reference above as follows:
GBX
Size
Casing diameter
Reduction ratio
Associated BMH servo motor
160 mm
8:1 and
12:1…40:1
Type
Model
Integrated servo motor adaptor
p
p
p
p
p
p
p
p
p
F
p
160
7
008…040
(as in the
table above)
100
140
1
2
3
8
F
BMH servo motor/GBX planetary gearbox combinations
Reduction ratios from 3:1 to 100:1
Type of
servo
motor
BMH 0701
BMH 0702
BMH 0703
BMH 1001
BMH 1002
BMH 1003
BMH 1401
BMH 1402
BMH 1403
GBX 060
Reduction ratio
3:1
5:1
8:1
9:1
12:1
15:1
20:1
25:1
32:1
40:1
60:1
100:1
4:1
16:1
80:1
GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 080 GBX 080 GBX 080 GBX 080 GBX 120 GBX 120
GBX 060 GBX 060 GBX 080 GBX 060 GBX 060 GBX 080 GBX 080 GBX 080 GBX 120 GBX 120 GBX 120 GBX 120
GBX 060 GBX 060 GBX 080 GBX 060 GBX 080 GBX 080 GBX 080 GBX 120 GBX 120 GBX 120 GBX 120 GBX 120
GBX 080 GBX 080 GBX 080 GBX 080 GBX 080 GBX 080 GBX 080 GBX 120 GBX 120 GBX 120 –
–
GBX 080 GBX 080 GBX 120 GBX 080 GBX 080 GBX 120 GBX 120 GBX 160 GBX 160 GBX 160 –
–
GBX 080 GBX 080 GBX 120 GBX 080 GBX 120 GBX 120 GBX 120 GBX 160 GBX 160 GBX 160 –
–
GBX 120 GBX 120 GBX 120 GBX 120 GBX 120 GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 –
–
GBX 120 GBX 120 GBX 160 –
GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 –
–
GBX 120 GBX 120 GBX 160 –
GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 –
–
For these combinations, you must check that the application will not exceed the maximum gearbox output torque; see the values on our website
www.schneider-electric.com.
51
9
10
Lexium 32 motion control
References
BMH servo motors
Option: GBY angular planetary gearboxes
References
Size
PF080937
1
GBY 60
GBY 80
2
GBY 120
GBY
3
p
p
p
p
p
p
5
Reference
3:1, 4:1, 5:1 and 8:1
GBY 060
12:1
GBY 060
3:1, 4:1, 5:1 and 8:1
GBY 080
12:1, 20:1 and 40:1
GBY 080
3:1, 4:1, 5:1 and 8:1
GBY 120
12:1, 20:1 and 40:1
GBY 120
p
p
p
p
p
p
Weight
kg
p
p
p
p
p
p
p
p
p
p
p
p
K
1.700
K
1.900
K
4.400
K
5.000
K
12.000
K
14.000
K angular planetary gearbox
To order a GBY angular planetary gearbox, complete each reference above as follows:
GBY
Size
4
Reduction ratio
Casing diameter
Reduction ratio
p
p
p
60 mm
060
80 mm
080
120 mm
120
p
p
K
p
3:1
003
4:1
004
5:1
005
8:1
008
12:1
012
20:1
020
40:1
040
Mounting with GBK adaptor kit
(see page 53)
K
BMH servo motor/GBX angular planetary gearbox combinations
Reduction ratios from 3:1 to 40:1
6
7
Type of
servo motor
Reduction ratio
3:1
4:1
5:1
8:1
12:1
20:1
40:1
BMH 0701
GBY 060
GBY 060
GBY 060
GBY 060
GBY 060
GBY 080
GBY 080
BMH 0702
GBY 060
GBY 060
GBY 060
GBY 080
GBY 080
GBY 080
GBY 120
BMH 0703
GBY 080
GBY 080
GBY 080
GBY 080
GBY 080
GBY 080
GBY 120
BMH 1001
GBY 080
GBY 080
GBY 080
GBY 080
GBY 080
GBY 080
GBY 120
BMH 1002
GBY 080
GBY 080
GBY 080
GBY 120
GBY 080
GBY 120
–
BMH 1003
GBY 120
GBY 120
GBY 120
GBY 120
GBY 120
GBY 120
–
BMH 1401
GBY 120
GBY 120
GBY 120
GBY 120
GBY 120
–
–
GBY 060
For these combinations, you must check that the application will not exceed the maximum gearbox output torque; see the values on our
website www.schneider-electric.com.
8
9
10
Servo drives:
page 14
52
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
Lexium 32 motion control
References
BMH servo motors
Option: Adaptor kit for GB planetary gearboxes
p
References
To order a GBK adaptor kit (1), complete each reference as follows:
GBK
Size of GBX or GBY planetary
gearbox
Casing diameter
Associated servo motor
Compatibility
p
p
p
60 mm
060
80 mm
080
120 mm
120
p
p
p
BMH 070
070
BMH 100
100
BMH 140
140
F
p
1
2
All types of motor
0
1 or 2 stage motors
2
1, 2 or 3 stage motors
3
3
BMH servo motor adaptor
F
GBK adaptor kit/BMH servo motor combination
Type of gearbox
BMH servo motor
0701
p
0702
p
0703
p
1001
p
1002
p
1003
p
1401
p
1402
p
1403
p
4
GBK 060 070 2 F
GBK 060 070 3F
GBK 080 070 2F
GBK 080 070 3F
GBK 080 100 3F
GBK 120 070 2F
5
GBK 120 070 3F
GBK 120,100 3F
GBK 120 140 0F
Compatible
Not compatible
6
(1) Weight of adaptor kit:
GBK 060
F: 0.200 kg
GBK 080
F: 0.450 kg
GBK 120
F: 0.650 kg
b
p
p
p
p
p
p
p
p
p
b
b
7
8
9
10
Servo drives:
page 14
BMH servo motors:
page 42
BSH servo motors:
page 54
Servo drive/motor
combinations: page 8
53
Lexium 32 motion control
Presentation
BSH servo motors
Presentation
BSH servo motors are the ideal choice to meet requirements for dynamics and
precision. With five flange sizes and a variety of lengths, there is a suitable solution
for most applications, covering a continuous stall torque range from 0.5 to 33.4 Nm
for speeds up to 9000 rpm.
BSH servo motor with
straight connectors
BSH servo motor with
rotatable angled
connectors
Thanks to their new winding technology based on salient poles, BSH servo motors
are far more compact and offer a higher power density than conventional servo
motors.
BSH servo motors are certified as “Recognized”
by the Underwriters Laboratories
and conform to UL 1004 standards as well as to European directives ( marking).
e
They are available with the following variants:
4 flange sizes: 55, 70, 100 and 140 mm
2 degrees of protection for the shaft end: IP 50 or IP 65 in accordance with
standard IEC/EN 60529. The degree of protection of the casing is IP 65 (IP 67 with
the conformity kit, which is available as an option)
With or without holding brake
Straight or angled connectors for power and encoder connection
Integrated SinCos Hiperface® single turn or multiturn encoder
(medium or high resolution)
Untapped or keyed shaft end
b
b
b
b
b
b
Special features
BSH servo motors have been developed to comply with the following main
specifications:
The ambient operating temperature is - 20...+ 40°C without derating, in
accordance with standard IEC 60721-3-3, category 3K3 and up to 55°C with derating
of 1% of the nominal output power per additional °C above 40°C.
b
The maximum operating altitude is 1000 m without derating, 2000 m with
k = 0.86 and 3000 m with k = 0.8 (1).
The relative humidity that the servo motor can withstand is in line with standard
IEC 60721-3-3, categories 3K3, 3Z12 et 3Z2.
b
The windings are insulation class F (maximum temperature for windings 155°C)
in accordance with standard IEC 60034-1.
b
All mounting positions are permitted (horizontal mounting (IMB5) or vertical
mounting (IMV1 with shaft end at the top and IMV3 with shaft end at the bottom) in
accordance with standard IEC 60034-7.
b
Sizing
The Lexium Sizer sizing tool is available on our website www.schneider-electric.com
to help you size your servo motor.
(1) k: derating factor.
Servo drives:
page 14
54
BSH servo motors:
page 56
Options:
page 60
BMH servo motors:
page 44
Servo drive/motor
combinations: page 8
Presentation (continued),
description
Lexium 32 motion control
BSH servo motors
Presentation (continued)
Holding brake
BSH servo motors can be equipped with a failsafe electromagnetic holding brake.
Do not use the holding brake as a dynamic brake for deceleration, as this
will quickly damage the brake.
Integrated encoder
BSH servo motors are equipped with a SinCos Hiperface® high-resolution single turn
(131,072 points/turn) (1) or multiturn (131,072 points/turn x 4096 turns) (1) encoder
providing angular precision of the shaft position, accurate to less than ± 1.3 arc
minutes.
This encoder performs the following functions:
Gives the absolute position of the motor so that flows can be synchronized.
Measures the servo motor speed via the associated Lexium 32 servo drive. This
information is used by the servo drive's speed controller.
Measures the position information for the servo drive's position controller.
Sends data from the servo motor to the servo drive, which ensures automatic
identification of the motor when the servo drive starts.
b
b
b
b
Description
4
5
1
2
3
BSH servo motors, with a 3-phase stator and a 6 to 10-pole rotor (depending on
model) with Neodymium Iron Borium (NdFeB) magnets, consist of:
1 A casing protected by opaque RAL 9005 black paint
2 A 4-point axial fixing flange
3 A keyed or untapped shaft end (depending on the model)
4 A threaded dust and damp proof male straight connector for connecting the
power cable (2)
5 A threaded dust and damp proof male straight connector for connecting the
control cable (encoder) (2)
Cables and connectors to be ordered separately, for connection to Lexium 32
servo drives (see page 58).
Schneider Electric has taken particular care to ensure compatibility between BSH
servo motors and Lexium 32 servo drives. This compatibility can only be assured by
using cables and connectors sold by Schneider Electric (see page 58).
(1) Encoder resolution given for use with a Lexium 32 servo drive.
(2) Other model with rotatable angled connector (see page 57).
Servo drives:
page 14
BSH servo motors:
page 56
Options:
page 60
BMH servo motors:
page 44
Servo drive/motor
combinations: page 8
55
Lexium 32 motion control
References
105990
BSH servo motors
BSH servo motors
The BSH servo motors shown below are supplied without a gearbox.
For GBX and GBY gearboxes, see pages 63 and 64.
1
Continuous
stall torque
BSH 055
p
p
p
p
1A
p
Nm
0.5
2
3
105991
0.8
4
BSH 070
p
p
p
p
p
1A
5
p
p
p
p
Maximum
mechanical
speed
Nm
1.4
W
300
rpm
6000
rpm
9000
1.5
150
3000
9000
300
6000
9000
1.9
250
3000
9000
2.5
450
6000
9000
400
6000
9000
400
6000
9000
1.2
3
550
6000
9000
3.3
350
3000
9000
1.3
3.5
500
5000
8000
1.4
3.5
350
2500
8000
700
5000
8000
6.1
550
2500
8000
7.2
950
5000
8000
7.6
850
5000
8000
2.6
7.4
900
4000
8000
2.7
7.5
900
4000
6000
3.1
11.3
1300
5000
8000
3.3
6.3
700
2500
6000
9.6
1100
4000
6000
16.4
1500
4000
6000
18.3
1700
4000
6000
28.3
2000
3000
6000
2600
4000
6000
2100
2500
6000
2600
3000
6000
2500
2500
4000
3000
3000
4000
5.8
105993
8
10
11.1
37.9
27
9
BSH 1401P
p
10
p
p
Associated
LXM 32
servo drive
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Reference
(1)
U45M2
BSH 0551T
U90M2
BSH 0551T
U60N4
BSH 0551P
U90M2
BSH 0552T
U90M2
BSH 0552T
U60N4
BSH 0552P
U60N4
BSH 0553P
U90M2
BSH 0553T
Weight
(2)
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
A
kg
1.160
A
1.160
A
1.160
A
1.470
A
1.470
A
1.470
A
1.760
A
1.760
A
2.200
A
2.200
A
2.200
A
2.890
A
2.890
A
3.620
A
4.200
A
3.620
A
4.200
A
4.200
A
5.900
A
5.900
A
7.400
A
7.400
A
9.500
A
9.500
A
11.200
A
11.200
P
16.000
P
21.200
P
26.500
D18M2
U90M2
BSH 0701T
D18M2
BSH 0701T
D12N4
BSH 0701P
D30M2
BSH 0702T
p
p
p
p
p
p
p
p
D18M2
D12N4
BSH 0702P
D18M2
BSH 0703T
D18M2
BSH 1001T
D18N4
BSH 0703P
D30M2
BSH 1001T
D18N4
BSH 1001P
D30M2
BSH 1002T
D18N4
BSH 1002P
D30N4
BSH 1003P
D30N4
BSH 1003P
D30N4
BSH 1004P
D30N4
BSH 1004P
D30N4
BSH 1401P
D30N4
BSH 1401P
D72N4
BSH 1402T
D72N4
BSH 1403T
D72N4
BSH 1404P
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
1A
7
8
Nominal
speed
3.5
105992
BSH 100
p
Nominal
servo motor
output power
1.05
2.2
6
Peak
stall torque
1A
19.5
59.3
3900
3000
4000
27.8
90.2
4100
3000
4000
33.4
103.6
5000
2500
4000
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
(1) To complete each reference see the table on page 57.
(2) Weight of servo motor without brake, no packaging. To obtain the weight of the servo motor with holding brake, please consult
our website www.schneider-electric.com.
Presentation:
page 54
56
Options:
page 60
Servo drives:
page 14
BMH servo motors:
page 42
Servo drive/motor
combinations: page 8
Lexium 32 motion control
References (continued)
BSH servo motors
BSH servo motors (continued)
To order a BSH servo motor, complete each reference on the opposite page with:
BSH 0551T
Shaft end
p
p
p
p
0
IP 50
Untapped
Keyed
1
IP 65/IP 67 (1)
Untapped
2
Keyed
3
Integrated sensor
High resolution,
optical
Single turn, SinCos Hiperface®
131,072 points/turn (2)
1
Multiturn, SinCos Hiperface®
131,072 points/turn x 4096 turns (2)
2
Holding brake
Without
A
With
F
Connections
Flange
1
p
2
Straight connectors
1
Rotatable right-angled connectors
2
A or P
(3)
International standard
3
Note: The example above is for a BSH 0551T servo motor. For other servo motors, replace BSH 0551T with the relevant
reference.
Dimensions (overall)
Servo motors
BSH 0551
BSH 0552
BSH 0553
BSH 0701
BSH 0702
BSH 0703
BSH 1001
BSH 1002
BSH 1003
BSH 1004
BSH 1401
BSH 1402
BSH 1403
BSH 1404
Flange
p
p
p
p
p
p
p
p
p
p
p
p
p
p
W x H x D (4)
Without holding brake
With holding brake
mm
mm
55 x 55
55 x 94.5 x 132.5
55 x 94.5 x 159
55 x 55
55 x 94.5 x 154.5
55 x 94.5 x 181
55 x 55
55 x 94.5 x 176.5
55 x 94.5 x 203
70 x 70
70 x 111.5 x 154
70 x 111.5 x 180
70 x 70
70 x 111.5 x 187
70 x 111.5 x 213
70 x 70
70 x 111.5 x 220
70 x 111.5 x 254
100 x 100
100 x 138.5 x 169
100 x 138.5 x 200
100 x 100
100 x 138.5 x 205
100 x 138.5 x 236
100 x 100
100 x 138.5 x 241
100 x 138.5 x 272
100 x 100
100 x 138.5 x 277
100 x 138.5 x 308
140 x 140
140 x 178 x 218
140 x 178 x 256
140 x 140
140 x 192.5( 5) x 273
140 x 192.5 (5) x 311
140 x 140
140 x 192.5 (5) x 328
140 x 192.5 (5) x 366
140 x 140
140 x 192.5 (5) x 383
140 x 192.5 (5) x 421
4
5
6
PF080922
IP 67 conformity kits
7
This kit can be used to provide IP 67 degree of protection. It is fitted in place of the rear motor rating plate.
Description
IP 67 conformity kits
(supplied as an option)
For use with
Reference
BSH 055
VW3 M2 305
0.050
VW3 M2 306
0.100
VW3 M2 307
0.150
VW3 M2 308
0.300
BSH 070
BSH 100
VW3 M2 30
p
p
p
p
p
p
p
p
Weight
kg
p
BSH 140
8
(1) IP 67 with the VW3 M2 30 IP 67 conformity kit supplied as an option (see above).
(2) Sensor resolution given for use with a Lexium 32 servo drive.
(3) “A” or “P” depending on the model (see table of references on page 56).
(4) D = motor length (excluding shaft end).
(5) 192.5 mm with straight connector, 198.5 mm with rotatable angled connector.
p
9
10
Presentation:
page 54
Options:
page 60
Servo drives:
page 14
BMH servo motors:
page 42
Servo drive/motor
combinations: page 8
57
References (continued)
Lexium 32 motion control
BSH servo motors
Connection elements
Power cordsets
1
Description
From servo
motor
To servo
drive
Composition
BSH 055
BSH 070
BSH 100
BSH 1401P
LXM 32
.
See
combinations
pages 8
to 13
Length
Reference
m
Cordsets equipped with one
M23 industrial connector
(servo motor end)
p
p
p
p
p
p
2
VW3 M5 10 R
p
p
p
p
p
p
p
p
p
[(4 x 1.5 mm2)
+
(2 x 1 mm2)]
p
3
Cordsets equipped with one
M40 industrial connector
(servo motor end)
BSH 1402T
BSH 1403T
BSH 1404P
LXM 32 D72N4
p
[(4 x 4 mm2)
+
(2 x 1 mm2)]
4
1.5
Weight
kg
VW3 M5 101 R15
0.600
3
VW3 M5 101 R30
0.810
5
VW3 M5 101 R50
1.210
10
VW3 M5 101 R100
2.290
15
VW3 M5 101 R150
3.400
20
VW3 M5 101 R200
4.510
25
VW3 M5 101 R250
6.200
50
VW3 M5 101 R500
12.325
75
VW3 M5 101 R750
18.450
3
VW3 M5 103 R30
1.330
5
VW3 M5 103 R50
2.130
10
VW3 M5 103 R100
4.130
15
VW3 M5 103 R150
6.120
20
VW3 M5 103 R200
8.090
25
VW3 M5 103 R250
11.625
50
VW3 M5 103 R500
23.175
75
VW3 M5 103 R750
34.725
Length
Reference
Control cordsets
Description
From servo
motor
To servo
drive
Composition
BSH
LXM 32
.
See references
pages 14 and 15
m
5
SinCos Hiperface® encoder
cordsets equipped with an
M23 industrial connector
(servo motor end)
and an RJ45 connector
with 8+2 contacts
(servo drive end)
p
p
p
p
p
p
p
p
p
p
p
[3 x
(2 x 0.14 mm2)
+
(2 x 0.34 mm2)]
6
VW3 M8 102 R
p
p
p
1.5
kg
VW3 M8 102 R15
3
VW3 M8 102 R30
0.500
VW3 M8 102 R50
0.600
10
VW3 M8 102 R100
0.900
15
VW3 M8 102 R150
1.100
20
VW3 M8 102 R200
1.400
25
VW3 M8 102 R250
1.700
50
VW3 M8 102 R500
3.100
75
VW3 M8 102 R750
4.500
8
9
10
58
Options:
page 60
Servo drives:
page 14
BMH servo motors:
page 42
0.400
5
7
Presentation:
page 54
Weight
Servo drive/motor
combinations: page 8
References (continued)
Lexium 32 motion control
BSH servo motors
Connection elements (continued)
Connectors for creating power and control cordsets
Description
For use with
Item no. For
Reference
cable
crosssection
2
mm2
5
4
3
1
Weight
kg
M23 industrial connector
for creating power cordsets
(sold in multiples of 5)
BSH 055 , BSH 070 , BSH 100
and BSH 1401P servo motors
M40 industrial connector
for creating power cordsets
(sold in multiples of 5)
BSH 1402T, BSH 1403T and
BSH 1404P servo motors
1
4
VW3 M8 217
0.850
RJ45 connector
with 8+2 contacts for
creating control cordsets
(sold in multiples of 5)
LXM 32
servo drives
(CN3 connector)
2
–
VW3 M2 208
0.200
M23 industrial connector
for creating control cordsets
(sold in multiples of 5)
BSH
3
–
VW3 M8 214
0.350
p
p
p
p
p
p
1
1.5
VW3 M8 215
0.350
2
p
p
p
p
p
p
p
p
p
p
p
servo motors
From servo To servo
motor
drive
Composition Item no. Length Reference
m
Cables for
creating power cordsets
BSH 055
BSH 070
BSH 100
BSH 1401P
p
p
p
p
p
p
LXM 32
.
[(4 x 1.5 mm2) 4
See combinations +
pages 8
(2 x 1 mm2)]
to 13
p
p
p
p
p
p
BSH 1402T LXM 32 D72N4
BSH 1403T
BSH 1404P
p
Cables for
creating control cordsets for
SinCos Hiperface® encoders
BSH
p
p
p
p
p
LXM 32
.
See references
pages 14
and 15
p
p
p
p
p
3
4
Cables for creating power and control cordsets
Description
1
p
[(4 x 4 mm2)
+
(2 x 1 mm2)]
4
[3 x
5
(2 x 0.14 mm2)
+
(2 x 0.34 mm2)]
Weight
kg
25
VW3 M5 301 R250
5.550
50
VW3 M5 301 R500
11.100
100
VW3 M5 301 R1000
22.200
25
VW3 M5 303 R250
9.900
50
VW3 M5 303 R500
19.800
100
VW3 M5 303 R1000
39.600
25
VW3 M8 222 R250
1.400
50
VW3 M8 222 R500
2.800
100
VW3 M8 222 R1000
5.600
5
6
7
8
9
10
Presentation:
page 54
Options:
page 60
Servo drives:
page 14
BMH servo motors:
page 42
Servo drive/motor
combinations: page 8
59
Lexium 32 motion control
Presentation,
references
BSH servo motors
Option: Holding brake integrated in servo motor
Holding brake
Presentation
L1
L2
L3
c 24 V
Lexium 32
2
HBC
1
The holding brake integrated in the BSH servo motor is an electromagnetic
pressure spring brake that blocks the servo motor axis once the output current has
been switched off.
Servo drive with
integrated holding brake
(HBC)
In the event of an emergency, such as a power outage or an emergency stop, the
drive is immobilized, significantly increasing safety.
Blocking the servo motor axis is also necessary in cases of torque overload, such
as in the event of vertical axis movement.
As standard, the Lexium 32 servo drive has a holding brake controller which
amplifies the braking control signal, ensuring the brake is deactivated quickly. The
controller then reduces the control signal so as to decrease the power dissipated by
the holding brake.
3
4
Servo motor with
integrated holding brake
References
To select a BSH servo motor with or without holding brake, see the references on
page 57.
For any additional information about holding brake characteristics, visit our website
www.schneider-electric.com.
5
BSH servo motor
6
7
8
9
10
Servo drives:
page 14
60
BSH servo motors:
page 54
BMH servo motors:
page 42
Servo drive combinations/
motors: page 8
Lexium 32 motion control
Presentation,
references
BSH servo motors
Option: Encoder integrated in servo motor
Encoder integrated in BSH servo motor
Presentation
L1
L2
The standard measurement device is the SinCos Hiperface® single turn or multiturn
encoder integrated in BSH servo motors. This measurement device is perfectly
suited to the Lexium 32 range of servo drives.
L3
Use of this interface enables:
Automatic identification of BSH servo motor data by the servo drive
Automatic initialization of the servo drive's control loops, thus simplifying
installation of the motion control device
1
b
Lexium 32
b
E
2
Servo motor with SinCos
Hiperface® encoder
3
References
To select the type of SinCos Hiperface® encoder integrated in the BSH servo motor
(single turn or multiturn), see the references on page 57.
4
For any additional information about integrated encoder characteristics, visit our
website www.schneider-electric.com.
5
BSH servo motor
6
7
8
9
10
Servo drives:
page 14
BSH servo motors:
page 54
BMH servo motors:
page 42
Servo drive combinations/
motors: page 8
61
Presentation
Lexium 32 motion control
BSH servo motors
Option: GB planetary gearboxes
PF080936
p
Presentation
In many cases, motion control requires the use of planetary gearboxes to adapt
speeds and torques, while ensuring the precision demanded by the application.
1
Schneider Electric has chosen to use GBX planetary gearboxes and GBY angular
planetary gearboxes (made by Neugart) with the BSH range of servo motors.
The combination of BSH servo motors with the most suitable planetary gearboxes
makes them very easy to mount and ensures simple, risk-free operation.
GBX planetary gearboxes
The gearboxes are designed for applications which are not susceptible to
mechanical backlash.
They have a keyed shaft, are lubricated for life and conform to IP 54 degree of
protection.
PF080937
2
Available in 4 sizes (GBX 60...GBX 160), planetary gearboxes are offered in
15 reduction ratios (3:1...100:1).
GBY angular planetary gearboxes are available in 3 sizes (GBY 60…GBY 120)
with 7 reduction ratios (3:1...40:1).
3
The tables on pages 63 and 64 show the most suitable combinations of servo motor
and GBX or GBY planetary gearbox.
For other combinations or any additional information about planetary gearbox
characteristics, see the servo motor data sheets or visit our website www.schneiderelectric.com.
4
GBY angular planetary gearbox
PF080938
5
A GBK adaptor kit is offered for assembling the BSH servo motor and the
GBX 60…GBX 120 or GBY 60…GBY 120 planetary gearboxes (see page 65).
The GBX 160 planetary gearbox is equipped as standard with an integrated adaptor kit.
The adaptor kit comprises:
An adaptor plate
A shaft end adaptor, depending on the model (depends on the servo motor/
planetary gearbox combination)
Screws and bolts for mounting the plate on the planetary gearbox
Screws and bolts for mounting the servo motor
b
b
b
b
+
6
7
PF105616
GBK adaptor kit
8
GBX 160 planetary gearbox
9
10
Servo drives:
page 14
62
BSH servo motors:
page 54
BMH servo motors:
page 42
Servo drive combinations/
motors: page 8
Lexium 32 motion control
References
BSH servo motors
Option: GBX planetary gearboxes
References
PF080936
Size
GBX 60
GBX 80
GBX 120
GBX
p
p
p
p
p
p
K planetary gearbox
GBX 160
Reduction ratio
Reference
3:1, 4:1, 5:1 and 8:1
9:1, 12:1, 15:1, 16:1, 20:1, 25:1, 32:1 and 40:1
60:1
3:1, 4:1, 5:1 and 8:1
9:1, 12:1, 15:1, 16:1, 20:1, 25:1, 32:1 and 40:1
3:1, 4:1, 5:1 and 8:1
9:1, 12:1, 15:1, 16:1, 20:1, 25:1, 32:1 and 40:1
60:1, 80:1 and 100:1
8:1
12:1, 15:1, 16:1, 20:1, 25:1, 32:1 and 40:1
GBX 060
GBX 060
GBX 060
GBX 080
GBX 080
GBX 120
GBX 120
GBX 120
GBX 160
GBX 160
K
K
K
K
K
K
K
K
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
F
F
Weight
kg
0.900
1.000
1.300
2.100
2.600
6.000
8.000
10.000
18.000
22.000
1
2
To order a GBX 060…GBX 120 planetary gearbox, complete each reference above as follows:
GBX
Size
Casing diameter
Reduction ratio
p
p
p
p
p
p
K
3
060
080
120
60 mm
80 mm
120 mm
3:1
4:1
5:1
8:1
9:1
12:1
15:1
16:1
20:1
25:1
32:1
40:1
60:1
80:1
100:1
003
004
005
008
009
012
015
016
020
025
032
040
060
080
100
Mounting with GBK adaptor kit (see page 65)
4
5
K
6
To order a GBX 160 planetary gearbox, complete each reference above as follows:
GBX
Size
Reduction ratio
Casing diameter
Associated BSH servo motor
Type
160 mm
8:1 and
12:1…40:1
Motor
Integrated servo motor adaptor
p
p
p
p
p
p
p
p
p
F
p
160
008…040
(as in the
table above)
100
140
7
1
2
3
4
F
BSH servo motor/GBX gearbox combinations
Reduction ratios from 3:1 to 100:1
Type of
servo
motor
BSH 0551
BSH 0552
BSH 0553
BSH 0701
BSH 0702
BSH 0703
BSH 1001
BSH 1002
BSH 1003
BSH 1004
BSH 1401
BSH 1402
BSH 1403
BSH 1404
GBX 060
Reduction ratio
3:1
5:1
8:1
9:1
12:1
15:1
20:1
25:1
32:1
40:1
60:1
80:1
100:1
4:1
16:1
GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 –
–
GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 –
–
–
–
GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 –
–
–
–
–
–
GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 060 GBX 080 GBX 080 GBX 080 GBX 080 GBX 120 GBX 120 GBX 120
GBX 060 GBX 060 GBX 080 GBX 060 GBX 060 GBX 080 GBX 080 GBX 080 GBX 120 GBX 120 GBX 120 GBX 120 GBX 120
GBX 060 GBX 060 GBX 080 GBX 060 GBX 080 GBX 080 GBX 080 GBX 120 GBX 120 GBX 120 GBX 120 GBX 120 GBX 120
GBX 080 GBX 080 GBX 080 GBX 080 GBX 080 GBX 080 GBX 080 GBX 120 GBX 120 GBX 120 –
–
–
GBX 080 GBX 080 GBX 120 GBX 080 GBX 080 GBX 120 GBX 120 GBX 160 GBX 160 GBX 160 –
–
–
GBX 080 GBX 080 GBX 120 GBX 080 GBX 120 GBX 120 GBX 120 GBX 160 GBX 160 GBX 160 –
–
–
GBX 120 GBX 120 GBX 120 GBX 120 GBX 120 GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 –
–
–
GBX 120 GBX 120 GBX 120 GBX 120 GBX 120 GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 –
–
–
GBX 120 GBX 120 GBX 160 –
GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 –
–
–
GBX 120 GBX 120 GBX 160 –
GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 GBX 160 –
–
–
GBX 120 GBX 120 GBX 160 –
GBX 160 GBX 160 GBX 160 –
–
–
–
–
–
For these combinations, you must check that the application will not exceed the maximum gearbox output torque; see the values on our website
www.schneider-electric.com.
63
8
9
10
Lexium 32 motion control
References
BSH servo motors
Option: GBY angular planetary gearboxes
References
Size
PF080937
1
GBY 60
GBY 80
2
GBY 120
GBY
3
p
p
p
p
p
p
K angular planetary gearbox
Reference
3:1, 4:1, 5:1 and 8:1
GBY 060
12:1, 20:1 and 40:1
GBY 060
3:1, 4:1, 5:1 and 8:1
GBY 080
12:1, 20:1 and 40:1
GBY 080
3:1, 4:1, 5:1 and 8:1
GBY 120
12:1, 20:1 and 40:1
GBY 120
p
p
p
p
p
p
Weight
kg
p
p
p
p
p
p
p
p
p
p
p
p
K
1.700
K
1.900
K
4.400
K
5.000
K
12.000
K
14.000
To order a GBY angular planetary gearbox, complete each reference as follows:
GBY
Size
4
Reduction ratio
Casing diameter
Reduction ratio
5
p
p
p
60 mm
060
80 mm
080
120 mm
120
p
p
K
p
3:1
003
4:1
004
5:1
005
8:1
008
12:1
012
20:1
020
40:1
040
Mounting with GBK adaptor kit
(see page 65)
K
BSH servo motor/GBY gearbox combinations
6
7
8
Reduction ratios from 3:1 to 40:1
Type of
servo motor
Reduction ratio
3:1
4:1
5:1
8:1
12:1
20:1
40:1
BSH 0551
GBY 060
GBY 060
GBY 060
GBY 060
GBY 060
GBY 060
GBY 060
BSH 0552
GBY 060
GBY 060
GBY 060
GBY 060
GBY 060
GBY 060
–
BSH 0553
GBY 060
GBY 060
GBY 060
GBY 060
GBY 060
GBY 060
–
BSH 0701
GBY 060
GBY 060
GBY 060
GBY 060
GBY 060
GBY 080
GBY 080
BSH 0702
GBY 060
GBY 060
GBY 060
GBY 080
GBY 080
GBY 080
GBY 120
BSH 0703
GBY 080
GBY 080
GBY 080
GBY 080
GBY 080
GBY 080
GBY 120
BSH 1001
GBY 080
GBY 080
GBY 080
GBY 080
GBY 080
GBY 080
GBY 120
BSH 1002
GBY 080
GBY 080
GBY 080
GBY 120
GBY 080
GBY 120
–
BSH 1003
GBY 120
GBY 120
GBY 120
GBY 120
GBY 120
GBY 120
–
BSH 1004
GBY 120
GBY 120
GBY 120
–
GBY 120
–
–
BSH 1401
GBY 120
GBY 120
GBY 120
GBY 120
GBY 120
–
–
GBY 060
For these combinations, you must check that the application will not exceed the maximum gearbox output torque; see the values on our
website www.schneider-electric.com.
9
10
Servo drives:
page 14
64
BSH servo motors:
page 54
BMH servo motors:
page 42
Servo drive combinations/
motors: page 8
Lexium 32 motion control
References
BSH servo motors
Option: Adaptor kit for GB planetary gearboxes
p
References
To order a GBK adaptor kit, complete each reference as follows:
GBK
Size of GBX or GBY
planetary gearbox
Casing diameter
Associated BSH servo motor
Compatibility
p
p
p
60 mm
060
80 mm
080
120 mm
120
p
p
p
BSH 055
055
BSH 070
070
BSH 100
100
BSH 140
140
1
F
p
2
All types of motor
0
1 or 2 stage motors
2
1, 2 or 3 stage motors
3
4 stage motor
4
3
BSH servo motor adaptor
4
F
GBK adaptor kit/BSH servo motor combination
Type of gearbox
BSH servo motor
0551
p
0552
p
0553
p
0701
p
0702
p
0703
p
1001
p
1002
p
1003
p
1004
p
1401
p
1402
p
1403
p
1404
p
GBK 060 055 0 F
5
GBK 060 070 2 F
GBK 060 070 3F
GBK 080 070 2F
GBK 080 070 3F
GBK 080 100 3F
GBK 120 070 2F
6
GBK 120 070 3F
GBK 120,100 3F
GBK 120,100 4F
GBK 120 140 0F
7
Compatible
Not compatible
(1) Weight of adaptor kit:
GBK 060
F: 0.200 kg
GBK 080
F: 0.450 kg
GBK 120
F: 0.650 kg
b
p
p
p
p
p
p
p
p
p
b
b
8
9
10
Servo drives:
page 14
BSH servo motors:
page 54
BMH servo motors:
page 42
Servo drive combinations/
motors: page 8
65
www.schneider-electric.com
Schneider Electric Industries SAS
Head Office
89, bd Franklin Roosevelt
92506 Rueil-Malmaison
Cedex
France
Due to evolution of standards and equipment, the characteristics indicated in texts and images
of this document do not constitute a commitment on our part without confirmation.
Schneider’s UK Distributor (for Motion Control Section)
MOTION CONTROL PRODUCTS LTD.
11-15 Francis Avenue, Bournemouth, Dorset, UK BH11 8NX
Tel.: (+44) 01202 599922
Fax: (+44) 01202 599955
DIA7ED2110701EN-1
www.motioncontrolproducts.com
Design:
Schneider
Electric
Photos:
Schneider Electric Printed
by: Ingoprint
ART. 960619
October 2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement