- Schneider Electric Canada

- Schneider Electric Canada
Altistart and Altivar
Use Altistart soft starters to start your motors
smoothly and so protect the mechanics of your
equipment. With the Altivar range of variable
speed drives, you save energy and manage the
speed of your motors to optimise and enhance
productivity in your installations.
The Altistart, Altivar and Lexium ranges
increase the efficiency of your machines,
reduce their energy consumption and
optimise their kinematics. Easy to install,
offering intuitive programming and
extensive communication options, they
are easily integrated into your control
system architectures.
Lexium
Controllers, drives, motors and linear
positioning axes: Schneider Electric
offers a complete range of motion
control products and solutions
suitable for even the most specialised
applications. Designed with maximum
simplicity in mind throughout a
machine’s entire service life, the Lexium
range reduces costs and optimises
productivity.
Motion and Drives
1
WARNINenGt is a selection of
.
This docum
ng products
the top selli
2
Soft starters and variable speed drives
Selection guide ......................................................................................................... 3/3 and 3/7
3
Starters
Altistart 01 .................................................................................................................. 3/8 and 3/9
Altistart 22 ...............................................................................................................3/10 and 3/11
Altistart 48 .............................................................................................................. 3/12 and 3/13
Drives
Altivar 12 ............................................................................................................................... 3/14
Altivar 212 ............................................................................................................................. 3/15
Altivar 312 ............................................................................................................................. 3/16
Altivar 31C ............................................................................................................................. 3/17
Altivar 32 ............................................................................................................................... 3/18
Altivar 61, 61Q, 61 Plus ............................................................................................. 3/19 to 3/25
Specific cards and extension for pumping and ventilation machines ..................... 3/26 and 3/27
Altivar 71, 71Q, 71 Plus ............................................................................................. 3/28 to 3/34
Altivar LIFT ............................................................................................................................ 3/35
Specific cards and extension for complex and high power machines .................... 3/36 and 3/37
5
6
Accessories and options (Altistart et Altivar) ......................................... 3/38 and 3/39
Controllers, drives, motors and linear motion axes
7
Selection Guide ....................................................................................................... 3/40 to 3/42
Motion Controller Lexium LMC ..................................................................................... 3/43
8
Servo drives, servo motors Lexium 32 and accessories ....................... 3/44 to 3/51
Lexium 32 servo drives
Lexium BMH and Lexium BSH servo motors
Stepper Drives and Stepper Motors Lexium SD .................................................... 3/52
9
Lexium SD2/Lexium SD3 stepper drives
Lexium BRS2/Lexium BRS3 stepper motors
Integrated Drives Lexium IL ............................................................................... 3/53 to 3/55
Lexium ILA/ILE/ILS/ILT/ILP
10
Single axes and multi-axis Systems Linear Motion .............................. 3/56 and 3/57
Lexium PAS/CAS/TAS/MAX
Other versions: please consult our Customer Care Centre.
3/1
Highlights
S
Altivar 32
More than 150 application-specific
functions
The Altivar 32 range of variable speed drives controls
asynchronous and synchronous motors rated from 0.18 to 15 kW
operating in open loop mode in complex machines:
• Compact, vertical and slim format (45 mm)
• Integrated function blocks for creating simple control system
functions (timers, counters, comparators, etc.)
• Machine safety functions integrated as standard (STO, SLS, SS1)
• Open design: communicates with most industrial networks
3
For more information, see page 3/18
Lexium 32
Inspired by Simplicity
The Lexium 32 servo drive range (0.15 to 7 kW) is a drive system
designed for applications where high precision and dynamic
positioning are critical:
• Suitable for packaging, materials processing (cutting, turning,
milling, etc.) and handling, printing and textile applications
• 3 servo drive families and two types of servo motor available
• Simplified engineering: motor sizing, CAD and cabinet drawings,
support for PLCopen libraries and SoMove setup software
• Integrated “Safe Torque Off” function
• Quick integration: wide selection of fieldbus modules
D
For more information, see page 3/44
Ultra slim and ultra powerful
Practical and innovative, the Altivar 32 and Lexium 32 ranges can help
reduce the size of your enclosures by as much as 40%.
• Extra slim book format
• Easy to configure and setup with SoMove software
• Packed with common software tools, accessories and functions
• Homogeneous mounting and wiring systems
• High-performance communication system
• Built-in Bluetooth as standard
• Can be configured with the power off in its original packaging:
configurations can be transferred remotely via mobile phone using
SoMove Mobile software
Te
C
St
In
Other versions: please consult our Customer Care Centre.
3/2
Selection guide
Starters - Low voltage
CApplications:
CApplications:
CApplications:
Compressors, fans,
pumps, conveyors, car
wash gantries, etc.
Pumps, fans, turbines,
compressors, conveyors,
conveyor belts, lifting
screws, escalators, etc.
Pumps, high inertia
fans and machines,
compressors, conveyors,
agitators, mixers,
escalators, etc.
3
Description
Altistart 01
Altistart 22
Altistart 48
Soft start and
Soft start/soft stop units
Soft start/soft stop units
Soft start/soft stop units
• Compact
• Innovative with its integrated
Bypass contactor for motors up
to 315 kW
• Torque control system:
controlled torque, prevention of
pressure surges and limiting of
temperature rises
• Simple: easy mounting,
wiring and adjustment
• Efficient: Current peaks
limitation on starting, reduction
of mechanical shocks, increased
service life for your machines
• Energy saving
• Cost-effective
• Compact dimensions
Technical information
Communication
Power range for
50…60 Hz supply
0.37...15 kW
0.5...20 HP
Voltage
• Simple: quick setup
• Protection of motor and
starter
• Protection of motor and
starter: thermal protection,
phase loss detection, locked
rotor detection
• Energy saving
• Energy saving
• Quick setup
• 3 controlled phases
lp
tre.
Complex machines/
Special machines
Simple machines
4...400 kW
3...500 HP
4...1200 kW
2...200 HP
Single-phase 110…480 V
Three-phase 208…600 V
Three-phase 208…690 V
Three-phase 110…480 V
Three-phase 230…440 V
Drive/Output frequency
–
–
Motor type
Asynchronous
Yes
Yes
Yes
Synchronous
No
No
No
–
Integrated
–
Modbus
Modbus
As an option
Can be used with TeSys U
motor starter-controller to
create a complete motor
starter solution
–
DeviceNet, Fipio, PROFIBUS DP,
Ethernet
Standards and certifications
IEC/EN 60947-4-2, C-Tick, CSA,
UL, CE
IEC/EN 60947-4-2, C-Tick, CSA,
UL, CE, GOST, CCC
Class A EMC
IEC/EN 60947-4-2, C-Tick, CSA,
UL, CE, DNV, GOST, CCC, NOM,
SEPRO and TCF
Classes A and B EMC
Intended use
Buildings, Simple machines.
Machines, Infrastructures and Buildings
Other versions: please consult our Customer Care Centre.
3/3
Selection guide
Standard drives - Low voltage
Simple machines
CApplications:
C
C Applications:
C Applications:
C
Simple industrial
machines (material
handling and packaging,
textile machines, special
machines, pumps and
fans).
In
h
m
s
w
p
e
Altivar 31C IP55
A
Variable speed drives for small
Variable speed drives for threemachines with 240 V three-phase phase asynchronous motors
asynchronous motor
Variable speed drives for threephase asynchronous motors for
machines in harsh environments.
V
as
op
• Compact
• Rugged even in the most hostile
environments:
- Installed as close as possible to
the motor
- Integrated functions for applications
requiring IP55 degree of protection
- Modbus and CANopen
communication protocols
•
•
pl
•
av
•
lo
•
·E
en
m
• Simple machines for
industry (small handling
applications, packaging,
pumps, fans, etc.)
Simple industrial machines
(material handling
and packaging, textile
machines, special
machines, pumps and
• Simple consumer
machines (access barriers, fans).
rotating advertising
hoardings, medical beds,
treadmills, dough mixers,
etc.)
• Other types of application:
- Mobile machines and
small appliances equipped
with a power socket
- Applications which
traditionally use other
solutions (2-speed DC
motors, mechanical drives,
etc.).
3
Altivar 12
Description
• Easy to set up
(Plug & Play)
• Reliable, cost-effective
solution for compact machines
Altivar 312
• Open: large number of
communication cards available
as options
• User-friendly: simplified
interface
• Autotuning:
maximum performance
• Flexibility to adapt to each machine:
- Customisable depending on the
model
- Easy configuration
Technical information
Communication
Power range for
50…60 Hz supply
0.18...4 kW
0.25...5 HP
0.18...15 kW
0.5...20 HP
0.18...15 kW
0.5...20 HP
0.
0.
Voltage
Single-phase 100…240 V
Three-phase 200…240 V
Single-phase 200…240 V
Three-phase 200…600 V
Single-phase 200…240 V
Three-phase 380…500 V
S
T
Drive/Output frequency
0.5…400 Hz
0.5…500 Hz
0.5…500 Hz
0.
Motor type
Asynchronous
Yes
Yes
Yes
Y
Synchronous
No
No
No
Y
Integrated
Modbus
Modbus and CANopen
Modbus and CANopen
M
As an option
–
CANopen Daisy chain,
DeviceNet, PROFIBUS DP,
Modbus TCP, Fipio
DeviceNet, Ethernet TCP/IP,
Fipio, PROFIBUS DP
E
P
D
IEC/EN 61800-5-1, IEC/EN
61800-3 (environments 1 and 2,
categories C1 to C3)
CE, UL, CSA, C-Tick, GOST
IE
(e
C
C
C
61
dr
C
Standards and certifications
IEC/EN 61800-5-1, IEC/EN 61800-3 (environments 1 and 2,
categories C1 to C3)
CE, UL, CSA, C-Tick, GOST, NOM
Intended use
Machines
M
Other versions: please consult our Customer Care Centre.
3/4
s.
e
ons
n
ne:
,
tre.
Complex machines
Complex machines/
Special machines
Pumps and
Fans
C Applications:
C Applications:
C Applications:
C Applications:
Industrial machines:
hoisting, packaging,
material handling,
special machines (woodworking machines, metal
processing machinery,
etc.).
High performance
applications:
• Material handling
• Hoisting
• Wood-working machines
• Process machinery
• Textile machines
• Packaging
High performance
applications:
• Material handling
• Hoisting
• Wood-working machines
• Process machinery
• Textile machines
• Packaging
Range specifically for high Pumping and ventilation
performance pumps and
machines in harsh
fans for the industrial and environment
building markets.
C Applications:
3
Altivar 32
Altivar 71
Altivar 71Q
Altivar 61
Altivar 61Q
Variable speed drives for
asynchronous motors and
open-loop synchronous motors
For three-phase synchronous
and asynchronous motors.
Constant torque applications.
Variable speed drives for threephase asynchronous motors.
Variable torque applications.
• Compact: "Book" format
• Integrated Safety function compliant to IEC 61508 SIL3 and PL-e
• Open: communication cards
available as options
• Integrated programmable
logic functions
• Simple setup
· Energy saving : Control of
energy efficient permanent
magnet synchr onous motors
• Wide range
Water-cooled variable speed
drives for three-phase synchronous and asynchronous motors.
Constant torque applications.
• Improved robustness with
water cooling
• Efficient cooling system reduced
need of air conditioning
• Long time operation without
maintenance
• Excellent protection against
corrosion due to stainless steel
cooling pipes
• Very high starting torque for
frequent start-up applications
Water-cooled variable speed
drives for three-phase asynchronous and synchronous motors.
Variable torque applications
• Improved robustness with
water cooling
0.18...15 kW
0.25...20 HP
0.37...630 kW
0.5...700 HP
90...630 kW
125...700 HP
0.37...800 kW
0.5...900 HP
110…800 kW
150...900 HP
Single-phase 200…240 V
Three-phase 380…480 V
Single-phase 200…240 V
Three-phase 200…690 V
Three-phase 380...480 V
Three-phase 500…690 V
Single-phase 200…240 V
Three-phase 200…690 V
Three-phase 380...480 V
Three-phase 500…690 V
0.1…599 Hz
0…599 Hz up to 37 kW /
0…500 Hz
200…240V and 380…480V
0…500 Hz for the rest of the range
• Quick start-up and easy
diagnostics: multi-language
graphic display terminal
• Open to most industrial
communication buses
• Integrated safety functions
• Motor control: highperformance in open-loop and
closed loop mode
• Wide range
• Easy setup and diagnostics
with the multi-language graphic
display terminal
• Open to the main
communication buses
• Efficient cooling system reduced
need of air conditioning
• Prolonged maintenance-free
operational life
• Excellent protection against
corrosion due to stainless steel
cooling pipes
0.1…500 Hz
0.1…599 Hz up to 37 kW /
200…240V and 380…480V
0.1…500 Hz for the rest of the range
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Modbus and CANopen
Modbus and CANopen
Modbus et CANopen
Modbus and CANopen
Modbus et CANopen
EtherNet/IP, Modbus TCP,
PROFIBUS DP V1, EtherCAT,
Devicenet
Modbus TCP, Fipio,
Modbus/Uni-Telway, Modbus
Plus, EtherNet/IP, DeviceNet,
PROFIBUS DP, PROFIBUS DP V1,
INTERBUS S, CC-Link,
Modbus TCP, Fipio, Modbus/UniTelway, Modbus Plus, EtherNet/IP,
DeviceNet, PROFIBUS DP, PROFIBUS
DP V1, INTERBUS S, CC-Link,
Modbus TCP, Fipio, Modbus/UniTelway, Modbus Plus, EtherNet/IP,
DeviceNet, PROFIBUS DP, PROFIBUS
DP V1, INTERBUS S, CC-Link,
Lonworks, METASYS N2, APOGEE FLN P1, BACnet
HVAC protocols : LonWorks, BACnet,
METASYS N2,APOGEE FLN P1
Industrial protocols: Modbus TCP,
Modbus/Uni-Telway, Fipio, Modbus Plus,
PROFIBUS DP, PROFIBUS DP V1, DeviceNet,
Ethernet IP, CC-Link, INTERBUS
IEC/EN 61800-5-1, IEC/EN 61800-3
(environments 1 and 2, Categories
C2 and C3), UL508C, EN 954-1
Category 3, ISO/EN 13849-1/- 2
Category 3 (PLd), IEC 61800-5-2, IEC
61508 (parts 1&2) level SIL1 SIL2 SIL3,
draft standard EN 50495E, CE, UL,
CSA, C-Tick, GOST, NOM.
IEC/EN 61800-3, EN 55011,
EN 55022, CSA, UL, C-TICK,
CE, NOM, DNV, GOST
IEC/EN 61800-3, EN 55011, EN
55022, CSA, UL, C-TICK, CE,
NOM, DNV, GOST
IEC/EN 61800-3, EN 55011,
EN 55022, CSA, UL, C-TICK,
CE, NOM, DNV, GOST
IEC/EN 61800-3, EN 55011, EN
55022, CSA, UL, C-TICK, CE,
NOM, DNV, GOST
Machines
Machines, industrial processes
and infrastructures
Machines, industrial processes
or infrastructures
Buildings and infrastructures
Building or infrastructures
Other versions: please consult our Customer Care Centre.
3/5
Selection guide
Specialized drives - Low voltage
HVAC
Lifts
C Applications:
C Applications:
Range specifically for HVAC applications Lifts
(heating, ventilation, air conditioning) in
buildings.
3
Description
Altivar 212
Altivar LIFT
Variable speed drives for three-phase asynchronous motors.
Variable torque building HVAC applications.
Variable speed drives for lifts.
• Compact size: side-by-side mounting
• Quick start-up and easy diagnostics with the
multi-language graphic display terminal and
dedicated Lift configuration menu.
• Simplicity : Dedicated HVAC functions and remote
graphic keypad option
• Openness : Integrated communications for building management systems
• EMC filters built-in
• Reduction of the total harmonic distortion
THDI<30%
• Dedicated Lift functions for greater comfort
and safety
• High-performance motor control in open-loop
and closed loop mode
• Protection class: IP21 and IP55
Technical information
Power range for
50…60 Hz supply
0.75…75 kW
1...100 HP
4…22 kW
5...30 HP
Voltage
Three-phase 200…480 V
Single-phase 200…240 V
Three-phase 200…480 V
Drive/Output frequency
0.5…200 Hz
0...599 Hz
Number of quadrants
—
—
Cooling system
—
—
Protection class
—
—
Asynchronous
Yes
Yes
Synchronous
No
No
Motor type
Integrated
Modbus, METASYS N2, APOGEE FLN P1, BACnet Modbus and CANopen
As an option
Lonworks
Modbus TCP, Fipio, Modbus/Uni-Telway, Modbus
Plus,EtherNet/IP, DeviceNet, PROFIBUS DP,
PROFIBUS DP V1, INTERBUS S, CC-Link
Standards and certifications
IEC/EN 61800-3, EN 55011,
EN 55022, CSA, UL, C-TICK, CE, NOM
IEC/EN 61800-3, EN55011,
EN 55022, CSA, UL, C-TICK, CE, NOM et EN81-1
(chap 12.7.3)
Intended use
Buildings
Machines
Communication
Other versions: please consult our Customer Care Centre.
3/6
Notes
3
1
tre.
Other versions: please consult our Customer Care Centre.
3/7
Altistart 01
Simple machines
0.37…15 kW
0.5…20 HP
Starters
Dimensions (in mm)
ATS01
width x height x depth
N103FT/N106 FT
22.5 x 100 x 100.4
N109FT/N112 FT/N125 FT
N206pp/N209pp/N212pp
N222pp/N232pp
3
D
AT
45 x 124 x 130.7
45 x 154 x 130.7
Ty
M
Type
Motor power
Soft start units
0.37 to 11 kW
Soft start/soft stop units
0.75 to 15 kW
Degree of protection
IP20
Reduction of current peaks
2 controlled phases
2 controlled phases
R
Adjustable starting time
1…5 s
1…10 s
A
Adjustable deceleration time
No: freewheel stop
Yes: 1... 10 s
A
Adjustable breakaway torque
30…80% of DOL motor starting torque
Logic inputs
–
3 logic inputs (start, stop and startup boost)
Lo
Logic outputs
–
1 logic output
R
Relay outputs
–
1 relay output
C
Control supply voltage
110... 220 VAC ± 10%, 24 VDC ± 10%
Built into the starter
R
Supply voltage
Single-phase 110…230 V
D
Lo
Motor power
230 V
Nominal current
kW
(IcL)
0.37
3A
ATS01N103FT
M
0.75
6A
ATS01N106FT
23
1.1
9A
ATS01N109FT
kW
1.5
12 A
ATS01N112FT
0.
2.2
25 A
ATS01N125FT
Su
Three-phase 110…480 V
Supply voltage
1.
Three-phase 200…240 V Three-phase 380…415 V Three-phase 440…480 V
Motor power
1.
–
210 V 230 V
400 V
460 V
Nominal current
2.
3
HP
kW
HP
kW
HP
(IcL)
–
0.37-0.55
0.5/–
1.1
0.5-1.5
3A
ATS01N103FT
–
–
–
4
0.5
0.75-1.1
1-1.5
2.2-3
2-3
6A
ATS01N106FT
ATS01N206LU
ATS01N206QN
ATS01N206RT
5.
1
1.5
2
4
5
9A
ATS01N109FT
ATS01N209LU
ATS01N209QN
ATS01N209RT
7.
1.5
2.2
3
5.5
7.5
12 A
ATS01N112FT
ATS01N212LU
ATS01N212QN
ATS01N212RT
(1)
–
4-5.5
5-7.5
7.5-11
10-15
22 A
–
ATS01N222LU
ATS01N222QN
ATS01N222RT
2-3
3-4-5.5
5-7.5
7.5-9-11 10-15
25A
ATS01N125FT
–
–
–
–
7.5
10
15
32 A
–
ATS01N232LU
ATS01N232QN
ATS01N232RT
20
Other versions: please consult our Customer Care Centre.
3/8
Starters with TeSys model U
Dimensions (in mm)
width x height x depth
ATSU01 N206LT/N209LT/N212LT
45 x 124 x 130.7
N222LT/N232LT
45 x 154 x 130.7
Type
Motor power
Soft start/soft stop units
0.75 to 15 kW
Degree of protection
IP20
Reduction of current peaks
Yes
Adjustable starting and stopping times
1…10 s
Adjustable breakaway torque
30.... 80% of DOL motor starting torque
Logic inputs
3 logic inputs (start, stop and startup boost)
Logic outputs
1 logic output
Relay outputs
1 relay output
3
Control supply voltage
24 VDC, 100 mA, ± 10%
References
Soft start/soft stop
TeSys starter-controller
units
model U
Power base
Power connector
Control unit (1)
between ATSU and
TeSys model U
Supply voltage
Three-phase 200…480 V
Motor power
400 V
460 V
Nominal
kW
HP
kW
HP
current (IcL)
0.75
1
1.5
2
6A
ATSU01N206LT
LUB12
LUCp05BL
1.1
1.5
2.2/3
3
6A
ATSU01N206LT
LUB12
LUCp12BL
1.5
2
–
5
9A
ATSU01N209LT
LUB12
LUCp12BL
–
–
4
–
9A
ATSU01N209LT
LUB12
LUCp12BL
230 V
V
tre.
2.2
3
5.5
7.5
12 A
ATSU01N212LT
LUB12
LUCp12BL
3
–
–
–
12 A
ATSU01N212LT
LUB32
LUCp18BL
4
5
7.5
10
22 A
ATSU01N222LT
LUB32
LUCp18BL
5.5
7.5
11
15
22 A
ATSU01N222LT
LUB32
LUCp32BL
7.5
10
15
20
32 A
ATSU01N232LT
LUB32
LUCp32BL
VW3G4104
VW3G4104
VW3G4104
VW3G4104
VW3G4104
(1) To compose your reference, replace p in the reference with: «A» for a standard control unit, «M» for a multifunction unit and «B» for an advanced unit.
Other versions: please consult our Customer Care Centre.
3/9
Altistart 22
Simple machines
4…400 kW
3...500 HP
Dimensions (en mm)
Size A: 130 x 265 x 169
Size B: 145 x 295 x 207
Size C: 150 x 356 x 229
Size D: 206 x 425 x 299
Size E: 304 x 455 x 340
Soft start/soft stop units
width x height x depth
Supply voltage
Protection
Drive
3
Three-phase 208…600 V
Po
IP00: for ATS 22C11p p pC59 starters (protection of terminals available as an option)
23
Motor thermal protection
Class 10, 20 or 30
kW
Number of controlled phases
3
4
Types of control
Configurable voltage ramp, torque ramp
7.
Operating cycle
Standard
11
Integrated Bypass contactor
15
Analog inputs
1 PTC probe
18
Logic inputs
3
22
Logic outputs
–
30
Analog outputs
–
37
Relay outputs
2
45
Integrated display terminal, SoMove Lite setup software
55
Modbus
75
Dialogue
Communication
Standards and certifications
Motor connection
C
M
IP20: for ATS 22D17p p pD88 starters
Degree of protection
Functions
Number of I/O
Three-phase 230…440 V
Integrated
IEC/EN 60947-4-2, class A EMC, CE, UL, CSA, C-Tick, GOST, CCC
90
Possible to connect the starter in the motor delta
11
connection
13
16
C
M
Po
23
kW
4
7.
11
15
18
22
30
37
45
55
75
90
11
13
16
Th
Other versions: please consult our Customer Care Centre.
3/10
tre.
Connection in the motor power supply line
Motor
Soft start/soft stop unit 230…440 V - 50/60 Hz
Power indicated on rating plate
230 V
400 V
440 V
Nominal current
kW
kW
kW
starter (IcL)
Reference
Size
4
7.5
7.5
17
ATS22D17Q
Size A
7.5
15
15
32
ATS22D32Q
Size A
11
22
22
47
ATS22D47Q
Size A
15
30
30
62
ATS22D62Q
Size B
18.5
37
37
75
ATS22D75Q
Size B
22
45
45
88
ATS22D88Q
Size B
30
55
55
110
ATS22C11Q
Size C
37
75
75
140
ATS22C14Q
Size C
45
90
90
170
ATS22C17Q
Size C
55
110
110
210
ATS22C21Q
Size D
75
132
132
250
ATS22C25Q
Size D
90
160
160
320
ATS22C32Q
Size D
110
220
220
410
ATS22C41Q
Size D
132
250
250
480
ATS22C48Q
Size E
160
315
355
590
ATS22C59Q
Size E
Connection in the motor power supply line
Motor
3
Soft start/soft stop unit 230…600 V - 50/60 Hz
Power indicated on rating plate
230 V
400 V
440 V
500 V
kW
kW
kW
kW
Nominal current
starter (IcL)
Reference
Size
4
7.5
7.5
9
17
ATS22D17S6
Size A
7.5
15
15
18.5
32
ATS22D32S6
Size A
11
22
22
30
47
ATS22D47S6
Size A
15
30
30
37
62
ATS22D62S6
Size B
18.5
37
37
45
75
ATS22D75S6
Size B
22
45
45
55
88
ATS22D88S6
Size B
30
55
55
75
110
ATS22C11S6
Size C
37
75
75
90
140
ATS22C14S6
Size C
45
90
90
110
170
ATS22C17S6
Size C
55
110
110
132
210
ATS22C21S6
Size D
75
132
132
160
250
ATS22C25S6
Size D
90
160
160
220
320
ATS22C32S6
Size D
110
220
220
250
410
ATS22C41S6
Size D
132
250
250
315
480
ATS22C48S6
Size E
160
315
355
400
590
ATS22C59S6
Size E
The Altistart 22 soft start/soft stop unit is also available with a 110 VDC control power supply, reference ATS22…S6U
Other versions: please consult our Customer Care Centre.
3/11
Altistart 48
Pumping and ventilation machines
4…900 kW
2...1200 HP
Dimensions (in mm)
Soft start/soft stop units
width x height x depth
ATS48 D17Q to D47Q
Size A:
160 x 275 x 190
D62Q to C11Q
Size B:
190 x 290 x 235
C14Q to C17Q
Size C:
200 x 340 x 265
C21Q to C32Q
Size D:
320 x 380 x 265
C41Q to C66Q
Size E:
400 x 670 x 300
C79Q to M12Q
Size F:
770 x 890 x 315
Supply voltage
Type of application
AT
Three-phase 230…415 V (1)
Standard
Starter control supply voltage
Protection
D
Degree of protection
S
Ty
Severe (2)
220…415 V
St
IP20: ATS48D17p to ATS48C11p starters
C
IP00: ATS48C14p to ATS48M12p starters
EMC
3
Class 10
Class A
On all starters
H
Class B
On all starters up to 170 A
2
Torque control (patented TCS: Torque Control System)
3
Analog inputs
1 PTC probe
5
Logic inputs
4 logic inputs, 2 of which are configurable
7.
Logic outputs
2 configurable logic outputs
10
Analog outputs
1 analog output
–
Relay outputs
3 relay outputs, 2 of which are configurable
15
Integrated or remote display terminal (in option), PowerSuite software workshop
20
Integrated
Modbus
25
As an option
DeviceNet, Ethernet, Fipio, PROFIBUS DP
30
Starting mode
I/O
Dialogue
Communication
M
Motor thermal protection
Class 20 and 30
20
40
Motor power
230 V
400 V
Nominal current
kW
kW
(IcL)
3
5.5
12 A
–
4
7.5
17 A
ATS48D17Q
5.5
11
22 A
7.5
15
9
50
60
ATS48D17Q
Size A
75
Size A
ATS48D22Q
Size A
10
ATS48D22Q
Size A
ATS48D32Q
Size A
12
32 A
ATS48D32Q
Size A
ATS48D38Q
Size A
15
18.5
38 A
ATS48D38Q
Size A
ATS48D47Q
Size A
–
11
22
47 A
ATS48D47Q
Size A
ATS48D62Q
Size B
20
15
30
62 A
ATS48D62Q
Size B
ATS48D75Q
Size B
25
18.5
37
75 A
ATS48D75Q
Size B
ATS48D88Q
Size B
35
22
45
88 A
ATS48D88Q
Size B
ATS48C11Q
Size B
30
55
110 A
ATS48C11Q
Size B
ATS48C14Q
Size C
(1)
(2)
37
75
140 A
ATS48C14Q
Size C
ATS48C17Q
Size C
45
90
170 A
ATS48C17Q
Size C
ATS48C21Q
Size D
55
110
210 A
ATS48C21Q
Size D
ATS48C25Q
Size D
75
132
250 A
ATS48C25Q
Size D
ATS48C32Q
Size D
90
160
320 A
ATS48C32Q
Size D
ATS48C41Q
Size E
110
220
410 A
ATS48C41Q
Size E
ATS48C48Q
Size E
132
250
480 A
ATS48C48Q
Size E
ATS48C59Q
Size E
160
315
590 A
ATS48C59Q
Size E
ATS48C66Q
Size E
–
355
660 A
ATS48C66Q
Size E
ATS48C79Q
Size F
220
400
790 A
ATS48C79Q
Size F
ATS48M10Q
Size F
250
500
1000 A
ATS48M10Q
Size F
ATS48M12Q
Size F
355
630
1200 A
ATS48M12Q
Size F
–
(1) Possible to connect the starter in the motor delta connection
(2) Starting time greater than 30 seconds (fans, high inertia machines and compressors)
Other versions: please consult our Customer Care Centre.
3/12
40
tre.
Soft start/soft stop units
Dimensions (in mm)
ATS48
width x height x depth
D17Y to D47Y
Size A:
160 x 275 x 190
D62Y to C11Y
Size B:
190 x 290 x 235
C14Y to C17Y
Size C:
200 x 340 x 265
C21Y to C32Y
Size D:
320 x 380 x 265
C41Y to C66Y
Size E:
400 x 670 x 300
C79Y to M12Y
Size F:
770 x 890 x 315
Supply voltage
Type of application
Three-phase 208…690 V (1)
Standard
Severe (2)
Starter control supply voltage
110…230 V
Identical to 230…415 V starters
Characteristics
Nominal
Motor power
208 V 230 V
460 V
575 V
HP
230 V
400 V
440 V
500 V
525 V
660 V
690 V
current
(IcL)
kW
2
3
7.5
10
3
5.5
5.5
7.5
7.5
9
11
12 A
–
ATS48D17Y
Size A
3
5
10
15
4
7.5
7.5
9
9
11
15
17 A
ATS48D17Y
Size A
ATS48D22Y
Size A
5
7.5
15
20
5.5
11
11
11
11
15
18.5
22 A
ATS48D22Y
Size A
ATS48D32Y
Size A
7.5
10
20
25
7.5
15
15
18.5
18.5
22
22
32 A
ATS48D32Y
Size A
ATS48D38Y
Size A
10
–
25
30
9
18.5
18.5
22
22
30
30
38 A
ATS48D38Y
Size A
ATS48D47Y
Size A
–
15
30
40
11
22
22
30
30
37
37
47 A
ATS48D47Y
Size A
ATS48D62Y
Size B
15
20
40
50
15
30
30
37
37
45
45
62 A
ATS48D62Y
Size B
ATS48D75Y
Size B
20
25
50
60
18.5
37
37
45
45
55
55
75 A
ATS48D75Y
Size B
ATS48D88Y
Size B
25
30
60
75
22
45
45
55
55
75
75
88 A
ATS48D88Y
Size B
ATS48C11Y
Size B
30
40
75
100
30
55
55
75
75
90
90
110 A
ATS48C11Y
Size B
ATS48C14Y
Size C
40
50
100
125
37
75
75
90
90
110
110
140 A
ATS48C14Y
Size C
ATS48C17Y
Size C
50
60
125
150
45
90
90
110
110
132
160
170 A
ATS48C17Y
Size C
ATS48C21Y
Size D
60
75
150
200
55
110
110
132
132
160
200
210 A
ATS48C21Y
Size D
ATS48C25Y
Size D
75
100
200
250
75
132
132
160
160
220
250
250 A
ATS48C25Y
Size D
ATS48C32Y
Size D
100
125
250
300
90
160
160
220
220
250
315
320 A
ATS48C32Y
Size D
ATS48C41Y
Size E
125
150
300
350
110
220
220
250
250
355
400
410 A
ATS48C41Y
Size E
ATS48C48Y
Size E
150
–
350
400
132
250
250
315
315
400
500
480 A
ATS48C48Y
Size E
ATS48C59Y
Size E
–
200
400
500
160
315
355
400
400
560
560
590 A
ATS48C59Y
Size E
ATS48C66Y
Size E
200
250
500
600
–
355
400
–
–
630
630
660 A
ATS48C66Y
Size E
ATS48C79Y
Size F
250
300
600
800
220
400
500
500
500
710
710
790 A
ATS48C79Y
Size F
ATS48M10Y
Size F
350
350
800
1000
250
500
630
630
630
900
900
1000 A ATS48M10Y
Size F
ATS48M12Y
Size F
400
455
1000
1200
355
630
710
800
800
–
–
1200 A ATS48M12Y
Size F
–
3
(1) Starter connection in the motor delta connection: up to 500 V only, add "S316" at the end of the reference
(2) Starting time greater than 30 seconds (fans, high inertia machines and compressors)
Other versions: please consult our Customer Care Centre.
3/13
Altivar 12
Simple machines
0.18…4 kW
0.25...5 HP
A
0
1
Ultra-compact drives
D
width x height x depth
2F3: 105 x 143 x 131.2
3F3: 140 x 184 x 141.2
Dimensions (in mm)
1C1: 72 x 143 x 102.2
1C2: 72 x 143 x 102.2
1C3: 72 x 143 x 121.2
2C1: 105 x 142 x 156.2
2C2: 105 x 142 x 156.2
Type of drive
Supply voltage
Single-phase
120 V
Degree of protection
Drive
D
U/F, sensorless flux vector control, quadratic U/F
O
150…170
Ty
1 to 20
Sp
Number of functions
40
I/O
Number of preset speeds
8
Number of I/O
Analog inputs
1 configurable analog input
Logic inputs
4 assignable logic inputs
Analog outputs
1 configurable analog output
Relay outputs
1 protected relay logic output
D
Integrated or remote display terminal, SoMove software workshop, or mobile phone via Bluetooth©
C
Asynchronous motor
Speed range
Dialogue
Communication
Ty
S
IP20
Transient overtorque
3
Three-phase
240 V
0.5… 400 Hz
Output frequency
Type of control
Functions
Single-phase
240 V
Integrated
(s
Modbus
EM
Cards (available as an option)
Reduction of current harmonics
EMC filter
Integrated
C1 EMC
M
As an option
Motor power
kW/HP
0.18/0.25
ATV12H018F1 (1)
1C1 ATV12H018M2 (1) (2)
1C2 ATV12H018M3 (1)
1C3
0.37/0.5
ATV12H037F1
1C1 ATV12H037M2 (2)
1C1 ATV12H037M3
1C3
0.55/0.75
–
0.75/1
ATV12H075F1
2C1 ATV12H075M2 (2)
1C2 ATV12H075M3
1C3
1.5/2
–
ATV12HU15M2 (2)
2C2 ATV12HU15M3
2F3
2.2/3
–
ATV12HU22M2 (2)
2C2 ATV12HU22M3
2F3
3/3
–
–
ATV12HU30M3
3F3
4/5
–
–
ATV12HU40M3
3F3
ATV12H055M2 (2)
1C2 –
(1) Because of the low heat dissipation, the ATV12H018.. is only supplied on a base plate
(2) Also exists as a multipack
(1)
(2)
(3)
Other versions: please consult our Customer Care Centre.
3/14
Building
Altivar 212
0.75…75 kW
1...100 HP
Dimensions (in mm)
IP21
T1A: 107 x 143 x 150
T2A: 142 x 184 x 150
T3A: 180 x 232 x 170
T4A: 245 x 329.5 x 190
T5A: 240 x 420 x 214
T6A: 320 x 630 x 290
T7A: 240 x 550 x 266
T8A: 320 x 630 x 290
Type of drive
Supply voltage
Drives for HVAC applications
width x height x depth
IP55
T1: 215 x 297 x 192
T2: 230 x 340 x 208
T3: 290 x 560 x 315
T4: 310 x 665 x 315
T5: 284 x 720 x 315
T5: 284 x 880 x 343
T5: 362 x 1000 x 364
Three-phase
IP21
200…240 V
IP55
380…480 V
380…480 V
Degree of protection
IP21 and IP41 on the upper part
Output frequency
0.5…200 Hz
IP55 drive available in two manufacturing variants,
ATV212W…N4 C1 EMC or ATV212W…N4C C2 EMC
Type of control
Kn2 quadratic ratio, sensorless flux vector control, voltage/frequency ratio (2 points), energy saving ratio
Speed range
1 to 10
I/O
Analog inputs
1 switch-configurable current or voltage analog input and 1 voltage analog input, configurable as a PTC
Logic inputs
3 programmable logic inputs
Analog outputs
1 switch-configurable current or voltage analog output
probe input
3
2 relay logic outputs
Relay outputs
Integrated display terminal with local controls (1) or remote display terminal or PC software (3)
Dialogue
Communication
Integrated
(see page 4/11)
As an option
EMC filter
Modbus, APOGEE FLN P1, Metasys N2, BACnet
LonWorks
Integrated
–
Available as an option C2 EMC
C2 EMC
C2 EMC
C1 EMC
C1 EMC
–
–
0.75/1
ATV212H075M3X T1A ATV212H075N4
T1A ATV212W075N4
T1 ATV212W075N4C
T1
1.5/2
ATV212HU15M3X T1A ATV212HU15N4
T1A ATV212WU15N4
T1 ATV212WU15N4C
T1
C3
2.2/3
ATV212HU22M3X T1A ATV212HU22N4
T1A ATV212WU22N4
T1 ATV212WU22N4C
T1
C3
3/–
ATV212HU30M3X T2A ATV212HU30N4
T2A ATV212WU30N4
T2 ATV212WU30N4C
T2
4/5
ATV212HU40M3X T2A ATV212HU40N4
T2A ATV212WU40N4
T2 ATV212WU40N4C
T2
C3
5.5/7.5
ATV212HU55M3X T3A ATV212HU55N4
T2A ATV212WU55N4
T2 ATV212WU55N4C
T2
F3
7.5/10
ATV212HU75M3X T3A ATV212HU75N4
T3A ATV212WU75N4
T2 ATV212WU75N4C
T2
F3
11/15
ATV212HD11M3X T4A ATV212HD11N4
T3A ATV212WD11N4
T3 ATV212WD11N4C
T3
F3
15/20
ATV212HD15M3X T4A ATV212HD15N4
T4A ATV212WD15N4
T3 ATV212WD15N4C
T3
F3
18.5/25
ATV212HD18M3X T4A ATV212HD18N4
T4A ATV212WD18N4
T4 ATV212WD18N4C
T4
22/30
–
T4A –
tre.
Motor power
kW/HP
ATV212HD22N4S
–
22/30
ATV212HD22M3X T5A ATV212HD22N4 (2) T5A ATV212WD22N4
T5 ATV212WD22N4C
T5
30/40
ATV212HD30M3X T6A ATV212HD30N4 (2) T5A ATV212WD30N4
T5 ATV212WD30N4C
T5
37/50
–
ATV212HD37N4
T7A ATV212WD37N4
T6 ATV212WD37N4C
T6
45/60
–
ATV212HD45N4
T7A ATV212WD45N4
T6 ATV212WD45N4C
T6
55/75
–
ATV212HD55N4
T8A ATV212WD55N4
T7 ATV212WD55N4C
T7
75/100
–
ATV212HD75N4
T8A ATV212WD75N4
T7 ATV212WD75N4C
T7
(1) Drive with local controls, Run/Stop, Loc/Rem. keys
(2) For references ATV212HD22N4 and ATV212HD30N4, please refer to the Schneider Electric catalogue.
(3) PC Software is available as a free download from www.schneider-electric.com
Other versions: please consult our Customer Care Centre.
3/15
Simple industrial machines
Altivar 312
0.18…15 kW
0.25...20 HP
Dimensions (in mm)
T 1: 72 X 145 X 122
T 2: 72 X 145 X 132
T 3: 72 X 145 X 132
T 4: 72 X 145 X 142
T 5: 105 X 143 X 132
0.
0.
width x height x depth
T 6: 107 X 143 X 152
T 7: 142 X 184 X 152
T 8: 180 X 232 X 172
T 9: 245 X 330 X 192
Type of drive
Supply voltage
D
S
S
S
Single-phase 240 V Three-phase 240 V Three-phase 500V
with integrated EMC filters without EMC filter
Degree of protection
Drive
A
High performance drives
Output frequency
Type of control
Asynchronous motor
Three-phase 600V
IP20
D
0.5…500 Hz
D
Standard (voltage / frequency) - Performance (sensorless flux vector control)
Energy saving ratio
3
170 ... 200% of the nominal motor torque
Number of functions
50
Number of preset speeds
16
Number of I/O
Analog inputs
3
Logic inputs
6
Analog outputs
1
Logic outputs
–
Relay outputs
2
1 to 50
Integrated 4-digit display, remote terminals (IP54 or IP65), Altivar 61/71 remote graphic display terminal
Dialogue
Communication
M
Transient overtorque
Speed range
Functions
Integrated
Modbus and CANopen
As an option
CANopen Daisy chain, Modbus TCP, DeviceNet, PROFIBUS DP, Fipio
(1)
Reduction of current harmonics
EMC filter
Motor power
kW/HP
Integrated
C2 EMC
External as an option
Integrated C2(1) or C3 EMC
As an option
C1 EMC
–
–
–
0.18/0.25
ATV312H018M2
T1 –
–
T3 ATV312H018M3
External as an option
0.37/0.5
ATV312H037M2
T3 ATV312H037M3
T1 ATV312H037N4
T5 –
0.55/0.75
ATV312H055M2
T4 ATV312H055M3
T2 ATV312H055N4
T5 –
0.75/1
ATV312H075M2
T4 ATV312H075M3
T2 ATV312H075N4
T6 ATV312H075S6
1.1/1.5
ATV312HU11M2
T6 ATV312HU11M3
T5 ATV312HU11N4
T6 –
T6
1.5/2
ATV312HU15M2
T6 ATV312HU15M3
T5 ATV312HU15N4
T6 ATV312HU15S6
T6
2.2/3
ATV312HU22M2 (2)
T7 ATV312HU22M3
T6 ATV312HU22N4
T7 ATV312HU22S6
T7
3/-
–
ATV312HU30M3
T7 ATV312HU30N4
T7 –
4/5
–
ATV312HU40M3
T7 ATV312HU40N4
T7 ATV312HU40S6
T7
5.5/7.5
–
ATV312HU55M3
T8 ATV312HU55N4
T8 ATV312HU55S6
T8
7.5/10
–
ATV312HU75M3
T8 ATV312HU75N4
T8 ATV312HU75S6
T8
11/15
–
ATV312HD11M3
T9 ATV312HD11N4
T9 ATV312HD11S6
T9
15/20
–
ATV312HD15M3
T9 ATV312HD15N4
T9 ATV312HD15S6
T9
(1) C2 up to 4 kW
(2) Supplied with integrated C3 EMC filter
Other versions: please consult our Customer Care Centre.
3/16
S
with integrated EMC filters without EMC filter
V
Simple machines
Altivar 31C
0.18…15 kW
0.25...20 HP
Dimensions (in mm)
Size 1: 210 x 240 x 163
Size 3: 230 x 340 x 208
Size 5: 440 x 625 x 282
/
/
Enclosed IP55 drives
width x height x depth
Size 2: 215 x 297 x 192
Size 4: 320 x 512 x 282
Supply voltage
Single-phase 200…240 V
Three-phase 380…500 V
Degree of protection
IP55
Description
Enclosure equipped with an Altivar 31 drive with external heatsink. Removable covers for adding 1
switch-disconnector or 1 circuit-breaker, 3 buttons and/or LEDs, 1 potentiometer
Motor power
kW/HP
0.18/0.25
ATV31C018M2
Size 1
–
0.37/0.5
ATV31C037M2
Size 1
ATV31C037N4
Size 2
0.55/0.75
ATV31C055M2
Size 1
ATV31C055N4
Size 2
0.75/1
ATV31C075M2
Size 1
ATV31C075N4
Size 2
1.1/1.5
ATV31CU11M2
Size 2
ATV31CU11N4
Size 2
1.5/2
ATV31CU15M2
Size 2
ATV31CU15N4
Size 2
2.2/3
ATV31CU22M2
Size 3
ATV31CU22N4
Size 3
3/–
–
ATV31CU30N4
Size 3
4/5
–
ATV31CU40N4
Size 3
5.5/7.5
–
ATV31CU55N4 (1)
Size 4
7.5/10
–
ATV31CU75N4 (1)
Size 4
11/15
–
ATV31CD11N4 (1)
Size 5
15/20
–
ATV31CD15N4 (1)
Size 5
3
(1) Drive in metal enclosure without cover.
T6
T6
T7
T7
T8
T8
T9
T9
tre.
Other versions: please consult our Customer Care Centre.
3/17
Altivar 32
Complex machines
0.18…15 kW
0.25...20 HP
Compact drives
Dimensions (in mm)
width x height x depth
T1: 45 x 317 x 245
T2: 60 x 317 x 245
T4: 150 x 308 x 232 (EMC plate installed)
T4: 150 x 232 x 232 (EMC plate not installed)
T5: 180 x 404 x 232 (EMC plate installed)
T5: 180 x 330 x 232 (EMC plate not installed)
Type of drive
Single-phase
240 V with integrated EMC filter
Degree of protection
Drive
Three-phase
500 V with integrated EMC filter
IP20
0.1…599 Hz
Output frequency
Type of control
Asynchronous motor
Standard (voltage/frequency)
Performance (sensorless flux vector control)
Pump/fan (Kn² quadratic ratio)
Energy saving ratio
Synchronous motor
3
1 to 50
Speed range
Functions
Profile for open loop synchronous motor
170...200% of the nominal motor torque
Transient overtorque
Number of functions
150
Number of I/O
Analog inputs
3 - Response time : 3ms, resolution 10 bits
Logic inputs
6 - Response time : 8 ms, configurable in PTC and IN pwm
Analog outputs
1 - Updating time : 2 ms
Logic outputs
1 - Sampling time : 2 ms, configurable as voltage (0-10 V) or current (0-20 mA)
Relay outputs
2
4-digit display, remote display terminal (IP54 or IP55), remote graphic display terminal, SoMove setup
Dialogue
software and SoMove Mobile application for mobile phone.
Communication
Integrated
Modbus and CANopen - Bluetooth® link
As an option
DeviceNet, PROFIBUS DP V1, EtherNet/IP, Modbus TCP, EtherCat
Reduction of current harmonics
EMC filter
C2 EMC
Integrated
As an option
Motor power
C1 EMC
kW
HP
0.18
1/4
ATV32H018M2
T1
–
0.37
1/2
ATV32H037M2
T1
ATV32H037N4
T1
0.55
3/4
ATV32H055M2
T1
ATV32H055N4
T1
0.75
1
ATV32H075M2
T1
ATV32H075N4
T1
1.1
11/2
ATV32HU11M2
T2
ATV32HU11N4
T1
1.5
2
ATV32HU15M2
T2
ATV32HU15N4
T1
2.2
3
ATV32HU22M2
T2
ATV32HU22N4
T2
3
-
–
ATV32HU30N4
T2
4
5
–
ATV32HU40N4
T2
5.5
71/2
–
ATV32HU55N4
T4
7.5
10
–
ATV32HU75N4
T4
11
15
–
ATV32HD11N4
T5
15
20
–
ATV32HD15N4
T5
Other versions: please consult our Customer Care Centre.
3/18
tre.
Notes
3
Other versions: please consult our Customer Care Centre.
3/19
Altivar 61
0.37…800 kW
Dimensions (in mm)
T2 : 130 x 230 x 175
T4 : 175 x 295 x 187
T5B : 230 x 400 x 213
T7A : 240 x 550 x 266
T8 : 320 x 630 x 290
T10 : 360 x 1022 x 377
T12 : 440 x 1190 x 377
T14 : 890 x 1390 x 377
T3
T5A
T6
T7B
T9
T11
T13
T15
width x height x depth
: 155 x 260 x 187
: 210 x 295 x 213
: 240 x 420 x 236
: 320 x 550 x 266
: 320 x 920 x 377
: 340 x 1190 x 377
: 595 x 1190 x 377
: 1120 x 1390 x 377
Output frequency
Type of control
Three-phase
200…240 V
Three-phase
380…480 V
Ty
S
IP20 for unprotected drives and IP41 on the upper part
D
0.1…599 Hz up to 37 kW; 0.1…500 Hz from 45 to 800 kW
D
Asynchronous motor
Kn2 quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio (2 or 5 points), energy saving ratio
Synchronous motor
Vector control without speed feedback
Transient overtorque
120…130% of the nominal drive current for 60 seconds
1…100 in open loop mode
Sp
Number of functions
> 150
Fu
Number of preset speeds
16
Number of I/O
Analog inputs 2…4/Logic inputs 6…20
Speed range
3
D
T6
T8
T1
T1
T1
Single-phase
200…240 V
Degree of protection
Functions
0.
0.
Drives for industry and infrastructure
Type of drive
Supply voltage
Drive
A
Pumping and ventilation machines
Analog outputs 1…3/Logic outputs 0…8
Relay outputs 2…4
Safety input 1
Remote graphic display terminal, SoMove setup software (3)
D
Integrated
Modbus and CANopen
C
As an option
HVAC protocols: LonWorks, BACnet, METASYS N2, APOGEE FLN P1
Dialogue
Communication
Industrial protocols: Modbus TCP Daisy Chain, Modbus/Uni-Telway, EtherNet/IP, EtherCAT,
Cards (available as an option)
DeviceNet, PROFIBUS DP V0 and V1, INTERBUS, CC-Link
Multi-pump cards, I/O extension cards, “Controller Inside” programmable card
Reduction of current harmonics
DC choke integrated or supplied with the drive or AFE Altivar (Active Front End)
R
Integrated
C2 EMC
C2 EMC up to 7.5 kW
C2 EMC up to 4 kW
EM
C1 EMC
C1 EMC
C3 EMC from 5.5 to 630 kW
C1 EMC
M
As an option
0.37/0.5
ATV61H075M3
T2
–
from 0.75 to 630 kW
–
0.75/1
ATV61HU15M3
T2
ATV61H075M3
T2
ATV61H075N4
T2
1.5/2
ATV61HU22M3
T3
ATV61HU15M3
T2
ATV61HU15N4
T2
2.2/3
ATV61HU30M3
T3
ATV61HU22M3
T3
ATV61HU22N4
T2
3/–
ATV61HU40M3 (1)
T3
ATV61HU30M3
T3
ATV61HU30N4
T3
4/5
ATV61HU55M3 (1)
T4
ATV61HU40M3
T3
ATV61HU40N4
T3
5.5/7.5
ATV61HU75M3 (1)
T5A
ATV61HU55M3
T4
ATV61HU55N4
T4
7.5/10
–
ATV61HU75M3
T5A
ATV61HU75N4
T4
11/15
–
ATV61HD11M3X(2)
T5B
ATV61HD11N4
T5A
15/20
–
ATV61HD15M3X(2)
T5B
ATV61HD15N4
T5B
18.5/25
–
ATV61HD18M3X(2)
T6
ATV61HD18N4
T5A
22/30
–
ATV61HD22M3X(2)
T6
ATV61HD22N4
T6
30/40
–
ATV61HD30M3X(2)
T7B
ATV61HD30N4
T7A
37/50
–
ATV61HD37M3X(2)
T7B
ATV61HD37N4
T7A
45/60
–
ATV61HD45M3X(2)
T7B
ATV61HD45N4
T8
55/75
–
ATV61HD55M3X(2)
T9
ATV61HD55N4
T8
75/100
–
ATV61HD75M3X(2)
T9
ATV61HD75N4
T8
90/125
–
ATV61HD90M3X(2)
T10
ATV61HD90N4
T9
110/150
–
–
ATV61HC11N4
T9
132/200
–
–
ATV61HC13N4
T10
160/250
–
–
ATV61HC16N4
T11
220/350
–
–
ATV61HC22N4
T12
250/400
–
–
ATV61HC25N4
T13
315/500
–
–
ATV61HC31N4
T13
(1)
400/600
–
–
ATV61HC40N4
T14
500/700
–
ATV61HC50N4
T14
Fo
–
630/900
–
–
ATV61HC63N4
T15
EMC filter
Motor power
kW/HP
C
(1) Must be used with a line choke, refer to the Schneider Electric catalogue.
(2) Drive supplied without EMC filter
(3) SoMove setup software : available from 2011. Altivar 61 is also supported by Powersuite software workshop.
For all other variants, please refer to the Schneider Electric catalogue.
Other versions: please consult our Customer Care Centre.
3/20
Altivar 61
0.37…800 kW
0.5...900 HP
Dimensions (in mm)
T6
: 240 x 420 x 236
T8
: 320 x 630 x 290
T11 : 340 x 1190 x 377
T13 : 595 x 1190 x 377
T15 : 1120 x 1390 x 377
Drives for industry and infrastructure
width x height x depth
Type of drive
Supply voltage
Three-phase
500...690 V
IP20 and IP41 on the upper part
Degree of protection
Drive
io
tre.
Pumping and ventilation machines
0.1…599 Hz up to 37 kW; 0.1…500 Hz from 45 to 800 kW
Output frequency
Type of control
Asynchronous motor
Kn2 quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio (2 or 5 points), energy saving ratio
Synchronous motor
Vector control without speed feedback
120…130% of the nominal drive current for 60 seconds
Transient overtorque
1…100 in open loop mode
Speed range
Functions
Number of functions
> 150
Number of preset speeds
16
Number of I/O
Analog inputs 2…4/Logic inputs 6…20
3
Analog outputs 1…3/Logic outputs 0…8
Relay outputs 2…4
Safety input 1
Remote graphic display terminal, SoMove setup software (1)
Dialogue
Communication
Integrated
Modbus and CANopen
As an option
HVAC protocols: LonWorks, BACnet, METASYS N2, APOGEE FLN P1
Industrial protocols: Modbus TCP Daisy Chain, Modbus/Uni-Telway, EtherNet/IP, EtherCAT,
DeviceNet, PROFIBUS DP V0 et V1, INTERBUS, CC-Link
Multi-pump cards, I/O extension cards, “Controller Inside” programmable card
Cards (available as an option)
DC choke integrated or supplied with the product or AFE Altivar (Active Front End)
Reduction of current harmonics
EMC filter
Motor power
C3 EMC
Integrated
kW/HP
500 V
kW
575 V
HP
690 V
kW
2.2
3
3
ATV61HU30Y
T6
3
–
4
ATV61HU40Y
T6
4
5
5.5
ATV61HU55Y
T6
5.5
7.5
7.5
ATV61HU75Y
T6
7.5
10
11
ATV61HD11Y
T6
11
15
15
ATV61HD15Y
T6
15
20
18.5
ATV61HD18Y
T6
18.5
25
22
ATV61HD22Y
T6
22
30
30
ATV61HD30Y
T6
30
40
37
ATV61HD37Y
T8
37
50
45
ATV61HD45Y
T8
45
60
55
ATV61HD55Y
T8
55
75
75
ATV61HD75Y
T8
75
100
90
ATV61HD90Y
T8
90
125
110
ATV61HC11Y
T11
110
150
132
ATV61HC13Y
T11
132
–
160
ATV61HC16Y
T11
160
200
200
ATV61HC20Y
T11
200
250
250
ATV61HC25Y
T13
250
350
315
ATV61HC31Y
T13
315
450
400
ATV61HC40Y
T13
400
550
500
ATV61HC50Y
T15
500
700
630
ATV61HC63Y
T15
630
800
800
ATV61HC80Y
T15
(1) SoMove setup software : available from 2011. Altivar 61 is also supported by Powersuite software workshop.
For all other variants, please refer to the Schneider Electric catalogue.
Other versions: please consult our Customer Care Centre.
3/21
Altivar 61
A
Pumping and ventilation machines
0.75…90 kW
1...125 HP
11
15
IP54 drives
Dimensions (in mm)
width x height x depth
ATV61W…
TA2 : 235 x 490 x 272
TD : 310 x 665 x 315
TA3 : 235 x 490 x 286
TE : 284 x 720 x 315
TB
: 255 x 525 x 286
TF : 284 x 880 x 343
TC
: 290 x 560 x 315
TG : 362 x 1000 x 364
Type of drive
Degree of protection
Drive
Output frequency
Type of control
3
Three-phase 380…480 V
Ty
S
Type 12 (1) / IP54
D
0.1…599 Hz up to 37 kW; 0.1…500 Hz from 45 to 800 kW
D
Asynchronous motor
Kn2 quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio (2 or 5 points), energy saving ratio
Synchronous motor
Vector control without speed feedback
Transient overtorque
120…130% of the nominal drive current for 60 seconds
1…100 in open loop mode
Sp
Number of functions
> 150
Fu
Number of preset speeds
16
Number of I/O
Analog inputs 2…4/Logic inputs 6…20
Speed range
Functions
D
T1
T1
T1
Analog outputs 1…3/Logic outputs 0…8
Relay outputs 2…4
Safety input 1
Remote graphic display terminal, SoMove setup software (2)
D
Integrated
Modbus and CANopen
C
As an option
HVAC protocols: LonWorks, BACnet, METASYS N2, APOGEE FLN P1
Dialogue
Communication
Industrial protocols: Modbus TCP Daisy Chain, Modbus/Uni-Telway, EtherNet/IP, EtherCAT,
DeviceNet, PROFIBUS DP V0 and V1, INTERBUS, CC-Link
Cards (available as an option)
Multi-pump cards, I/O extension cards, “Controller Inside” programmable card
Reduction of current harmonics
Integrated DC choke
R
Integrated
C2 EMC
EM
As an option
–
0.75/1
ATV61W075N4
TA2
ATV61E5075N4
TA2
1.5/2
ATV61WU15N4
TA2
ATV61E5U15N4
TA2
2.2/3
ATV61WU22N4
TA2
ATV61E5U22N4
TA2
3/–
ATV61WU30N4
TA3
ATV61E5U30N4
TA3
4/5
ATV61WU40N4
TA3
ATV61E5U40N4
TA3
5.5/7.5
ATV61WU55N4
TB
ATV61E5U55N4
TB
7.5/10
ATV61WU75N4
TB
ATV61E5U75N4
TB
11/15
ATV61WD11N4
TC
ATV61E5D11N4
TC
15/20
ATV61WD15N4
TD
ATV61E5D15N4
TD
18.5/25
ATV61WD18N4
TD
ATV61E5D18N4
TD
22/30
ATV61WD22N4
TE
ATV61E5D22N4
TE
30/40
ATV61WD30N4
TF
ATV61E5D30N4
TF
37/50
ATV61WD37N4
TF
ATV61E5D37N4
TF
45/60
ATV61WD45N4
TG
ATV61E5D45N4
TG
55/75
ATV61WD55N4
TG
ATV61E5D55N4
TG
75/100
ATV61WD75N4
TG
ATV61E5D75N4
TG
90/125
ATV61WD90N4
TG
ATV61E5D90N4
TG
EMC filter
Motor power
kW/HP
C
–
M
Drive with integrated C1 filter: add the letter C at the end of the reference For example, ATV61W075N4 becomes ATV61W075N4C
For other variants, please refer to the Schneider Electric catalogue.
(1) For ATV61W... range only.
(2) SoMove setup software : available from 2011. Altivar 61 is also supported by Powersuite software workshop.
(1)
Other versions: please consult our Customer Care Centre.
3/22
Altivar 61Q
110…800 kW
150...900 HP
Water-cooled drives for harsh environments
Dimensions (in mm)
T11 : 330 x 950 x 377
T13 : 585 x 950 x 377
T15 : 1110 x 1150 x 377
width x height x depth
Type of drive
Supply voltage
Three-phase
380...480 V
0.1...500Hz
Output frequency
Type of control
Asynchronous motor
Kn2 quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio (2 or 5 points), energy saving ratio
Synchronous motor
Vector control without speed feedback
120…130% of the nominal drive current for 60 seconds
Transient overtorque
1…100 in open loop mode
Speed range
Functions
Three-phase
500...690 V
Sideways and front IP31 - Top IP20 - Bottom IP00
Degree of protection
Drive
o
tre.
Pumping and ventilation machines
Number of functions
> 150
Number of preset speeds
16
Number of I/O
Analog inputs 2…4/Logic inputs 6…20
3
Analog outputs 1…3/Logic outputs 0…8
Relay outputs 2…4
Safety input 1
Remote graphic display terminal, SoMove setup software (2)
Dialogue
Communication
Integrated
Modbus and CANopen
As an option
HVAC protocols: LonWorks, BACnet, METASYS N2, APOGEE FLN P1
Industrial protocols: Modbus TCP, Modbus/Uni-Telway, Fipio, Modbus Plus, Profbus DP,
Profbus DP V1, DeviceNet, EthernetIP, CC-Link, INTERBUS
Multi-pump cards, I/O extension cards, “Controller Inside” programmable card
Cards (available as an option)
Reduction of current harmonics
EMC filter
Motor power
Optional AC choke, Altivar AFE (Active Front End)
C3 EMC
Integrated
kW/HP
As an option
C1 EMC
110/150
ATV61QC11N4
T11
–
132/200
ATV61QC13N4
T11
–
160/250
ATV61QC16N4
T11
–
200/300
ATV61QC20N4
T13
–
250/400
ATV61QC25N4
T13
–
315/500
ATV61QC31N4
T13
–
400/600
ATV61QC40N4
T15
–
500/700
ATV61QC50N4
T15
–
630/900
ATV61QC63N4
T15
–
500 V
575 V
690 V
KW
HP
KW
110
150
132
–
ATV61QC13Y
T11
132
–
160
–
ATV61QC16Y
T11
160
200
200
–
ATV61QC20Y
T11
200
250
250
–
ATV61QC25Y
T13
250
350
315
–
ATV61QC31Y
T13
315
450
400
–
ATV61QC40Y
T13
400
550
500
–
ATV61QC50Y
T15
500
700
630
–
ATV61QC63Y
T15
630
800
800
–
ATV61QC80Y
T15
(1) SoMove setup software : available during 2011. Altivar 61 also works with the PowerSuite software workshop.
Other versions: please consult our Customer Care Centre.
3/23
Altivar 61
0.37…800 kW
0.5...900 HP
Pumping and ventilation machines
I/O extension and specific cards
Type of card
I/O extension
Logic
Extended
Description
1 relay logic output (“C/O” contact)
1 x 0…20 mA differential current analog input
4 x 24 VDC positive or negative logic inputs
1 software-configurable voltage (0…10 VDC) or
2 x 24 VDC open collector positive or negative logic current (0…20 mA) analog input
outputs
2 software-configurable voltage (±10V, 0…10 VDC)
1 input for PTC probes
or current (0…20 mA) analog inputs
1 relay logic output (“C/O” contact)
4 x 24 VDC positive or negative logic inputs
3
2 x 24 VDC open collector positive or negative logic
outputs
1 input for PTC probes
1 frequency control input
Reference
VW3A3201
VW3A3202
"Controller Inside" programmable card
Type of card
Programmable “Controller Inside”
Description
10 logic inputs, 2 of which can be used for 2 counters or 4 of which can be used for 2 incremental encoders
2 analog inputs, 6 logic outputs, 2 analog outputs, a master port for the CANopen bus, a PC port for
programming with the PS 1131 software workshop.
Reference
VW3A3501
Multi-pump cards
Type of card
Description
Multi-pump
The pump switching card ensures compatibility of
This card is specific to pump switching.
applications developed on the Altivar 38.
It ensures optimum flow for an impeccable quality of service.
Its algorithm both saves energy and prolongs equipment service life.
Reference
Description
Reference
VW3A3502
The VWA3503 “Water Solution” card can be used
This card offers all the functions needed to manage a pumping, booster, irrigation station, etc with the
to support all multi-pump applications.
operational safety of a control and monitoring system.
VW3A3503
Other versions: please consult our Customer Care Centre.
3/24
Notes
C)
3
gic
tre.
Other versions: please consult our Customer Care Centre.
3/25
Complex, high-power machines
Altivar 71
0.37…630 kW
0.5...700 HP
Dimensions (in mm)
T2 : 130 x 230 x 175
T4 : 175 x 295 x 187
T5B : 230 x 400 x 213
T7A : 240 x 550 x 266
T8 : 320 x 630 x 290
T10 : 360 x 1022 x 377
T12 : 440 x 1190 x 377
T14 : 890 x 1390 x 377
Output frequency
Type of control
Three-phase
380…480 V (3)
Ty
S
IP20 for unprotected drives and IP41 on the upper part
D
0…599 Hz up to 37 kW - 0…500 Hz from 45…630 kW
D
Flux vector control with or without sensor, voltage/frequency ratio (2 or 5 points), ENA System
Synchronous motor
Vector control with and without speed feedback (4)
220% of nominal motor torque for 2 seconds, and 170% for 60 seconds
1…1000 in closed loop mode with encoder feedback, 1…100 in open loop mode
Sp
Number of functions
> 150
Fu
Number of preset speeds
16
Number of I/O
Analog inputs
2…4
Logic inputs
6…20
Analog outputs
1…3
Logic outputs
0…8
Relay outputs
2…4
Safety input
1
Speed range
D
Remote graphic display terminal, SoMove setup software (5)
Dialogue
Communication
Three-phase
200…240 V (3)
Asynchronous motor
Transient overtorque
Functions
D
T2
T4
T5
T7
T8
T1
T1
T1
Single-phase
200…240 V (3)
Degree of protection
3
0.
0.
width x height x depth
T3 : 155 x 260 x 187
T5A : 210 x 295 x 213
T6 : 240 x 420 x 236
T7B : 320 x 550 x 266
T9 : 320 x 920 x 377
T11 : 340 x 1190 x 377
T13 : 595 x 1190 x 377
T15 : 1120 x 1390 x 377
Type of drive
Supply voltage
Drive
A
High performance drives
C
Modbus and CANopen
Integrated
Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 and V1,
As an option
INTERBUS, CC-Link.
C
Cards (available as an option)
Encoder interface cards, I/O extension cards, “Controller Inside” programmable card
R
Reduction of current harmonics
DC choke integrated or supplied with the product or Altivar AFE (Active Front End ).
EM
Integrated
C2 EMC up to 4 kW, C3 EMC from 5,5 to 500 kW
M
As an option
C1 EMC from 0.75 to 500 kW
EMC filter
Motor power
kW/HP
0.37/0.5
ATV71H075M3
T2
ATV71H037M3
T2
–
0.75/1
ATV71HU15M3
T2
ATV71H075M3
T2
ATV71H075N4
T2
1.5/2
ATV71HU22M3
T3
ATV71HU15M3
T2
ATV71HU15N4
T2
2.2/3
ATV71HU30M3
T3
ATV71HU22M3
T3
ATV71HU22N4
T2
3/–
ATV71HU40M3 (1)
T3
ATV71HU30M3
T3
ATV71HU30N4
T3
4/5
ATV71HU55M3 (1)
T4
ATV71HU40M3
T3
ATV71HU40N4
T3
5.5/7.5
ATV71HU75M3 (1)
T5A
ATV71HU55M3
T4
ATV71HU55N4
T4
7.5/10
–
ATV71HU75M3
T5A
ATV71HU75N4
T4
11/15
–
ATV71HD11M3X (2)
T5B
ATV71HD11N4
T5A
15/20
–
ATV71HD15M3X (2)
T5B
ATV71HD15N4
T5B
18.5/25
–
ATV71HD18M3X (2)
T6
ATV71HD18N4
T5B
22/30
–
ATV71HD22M3X (2)
T6
ATV71HD22N4
T6
30/40
–
ATV71HD30M3X (2)
T7B
ATV71HD30N4
T7A
37/50
–
ATV71HD37M3X (2)
T7B
ATV71HD37N4
T7A
45/60
–
ATV71HD45M3X (2)
T7B
ATV71HD45N4
T8
55/75
–
ATV71HD55M3X (2)
T9
ATV71HD55N4
T8
75/100
–
ATV71HD75M3X (2)
T10
ATV71HD75N4
T8
90/125
–
–
ATV71HD90N4
T9
110/150
–
–
ATV71HC11N4
T10
132/200
–
–
ATV71HC13N4
T11
160/250
–
–
ATV71HC16N4
T12
200/300
–
–
ATV71HC20N4
T13
220/350
–
–
ATV71HC25N4
T13
280/450
–
–
ATV71HC28N4
T13
315/500
–
–
ATV71HC31N4
T14
355/–
–
–
ATV71HC40N4
T14
500/700
–
–
ATV71HC50N4
T15
(1) Must be used with a line choke, Refer to the Schneider Electric catalogue.
(2) Drive supplied without EMC filter.
(3) A three-phase 380...480 V range on base plate is available from 0.75 to 11 kW. Please refer to the Schneider Electric catalogue.
(4) Vector control with speed feedback for synchronous motors is supported by the S383 variant of the Altivar 71.
(5) SoMove setup software : available from 2011. Altivar 71 is also supported by Powersuite software workshop.
Other versions: please consult our Customer Care Centre.
3/26
(1)
(2)
Fo
Complex, high-power machines
Altivar 71
0.37…630 kW
0.5...700 HP
Dimensions (in mm)
T2 : 130 x 230 x 175
T4 : 175 x 295 x 187
T5B : 230 x 400 x 213
T7A : 240 x 550 x 266
T8 : 320 x 630 x 290
T10 : 360 x 1022 x 377
T12 : 440 x 1190 x 377
T14 : 890 x 1390 x 377
High performance drives
width x height x depth
T3 : 155 x 260 x 187
T5A : 210 x 295 x 213
T6 : 240 x 420 x 236
T7B : 320 x 550 x 266
T9 : 320 x 920 x 377
T11 : 340 x 1190 x 377
T13 : 595 x 1190 x 377
T15 : 1120 x 1390 x 377
Type of drive
Supply voltage
Three-phase
500... 690 V
IP20 for unprotected drives and IP41 on the upper part
Degree of protection
Drive
0…599 Hz up to 37 kW - 0…500 Hz from 45…630 kW
Output frequency
Type of control
Asynchronous motor
Flux vector control with or without sensor, voltage/frequency ratio (2 or 5 points), ENA System
Synchronous motor
Vector control with and without speed feedback (1)
Transient overtorque
220% of nominal motor torque for 2 seconds, and 170% for 60 seconds
Number of functions
> 150
Number of preset speeds
16
Number of I/O
Analog inputs
2…4
Logic inputs
6…20
Analog outputs
1…3
Logic outputs
0…8
Relay outputs
2…4
Safety input
1
1…1000 in closed loop mode with encoder feedback, 1…100 in open loop mode
Speed range
Functions
Remote graphic display terminal, SoMove setup software (2)
Dialogue
Communication
3
Modbus and CANopen
Integrated
Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 and V1,
As an option
INTERBUS, CC-Link.
Encoder interface cards, I/O extension cards, “Controller Inside” programmable card
Cards (available as an option)
Reduction of current harmonics
EMC filter
DC choke integrated or DC choke optional or AFE Altivar (Active Front End)
C3 EMC
Integrated
500 V
kW
575 V
HP
690 V
kW
1.5
2
2.2
ATV71HU22Y
T6
2.2
3
3
ATV71HU30Y
T6
3
–
4
ATV71HU40Y
T6
4
5
5.5
ATV71HU55Y
T6
5.5
7.5
7.5
ATV71HU75Y
T6
7.5
10
11
ATV71HD11Y
T6
11
15
15
ATV71HD15Y
T6
15
20
18.5
ATV71HD18Y
T6
18.5
25
22
ATV71HD22Y
T6
22
30
30
ATV71HD30Y
T6
30
40
37
ATV71HD37Y
T8
37
50
45
ATV71HD45Y
T8
45
60
55
ATV71HD55Y
T8
A
55
75
75
ATV71HD75Y
T8
A
75
100
90
ATV71HD90Y
T8
90
125
110
ATV71HC11Y
T11
110
150
132
ATV71HC13Y
T11
132
–
160
ATV71HC16Y
T11
160
200
200
ATV71HC20Y
T13
200
250
250
ATV71HC25Y
T13
250
350
315
ATV71HC31Y
T13
315
450
400
ATV71HC40Y
T15
400
550
500
ATV71HC50Y
T15
500
700
630
ATV71HC63Y
T15
A
B
B
0
1
2
3
3
3
4
4
Motor power
kW/HP
(1) Vector control with speed feedback for synchronous motors is supported by the S383 variant of the Altivar 71.
(2) SoMove setup software : available from 2011. Altivar 71 is also supported by Powersuite software workshop..
For all other variants, please refer to the Schneider Electric catalogue.
5
tre.
Other versions: please consult our Customer Care Centre.
3/27
Complex, high-power machines
Altivar 71
0.75…75 kW
1...100 HP
A
90
12
IP54 drives
Dimensions (in mm)
width x height x depth
ATV71W…, ATV71E5…
up to 75 kW
TA2 : 235 x 490 x 272
TD : 310 x 665 x 315
TA3 : 235 x 490 x 286
TE : 284 x 720 x 315
TB
: 255 x 525 x 286
TF : 284 x 880 x 343
TC
: 290 x 560 x 315
TG : 362 x 1000 x 364
Type of drive
D
T1
T1
T1
Three-phase 380…480 V
Ty
S
With switch
Degree of protection
Drive
Output frequency
Type of control
Synchronous motor
Vector control without speed feedback
220% of nominal motor torque for 2 seconds, and 170% for 60 seconds
1…1000 in closed loop mode with encoder feedback, 1…100 in open loop mode
Sp
Number of functions
> 150
Fu
Number of preset speeds
16
Number of I/O
Analog inputs
2…4
Logic inputs
6…20
Analog outputs
1…3
Logic outputs
0…8
Relay outputs
2…4
Safety input
1
Remote graphic display terminal, SoMove setup software (2)
D
Integrated
Modbus and CANopen
C
As an option
Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 et V1,
Dialogue
Communication
D
Flux vector control with or without sensor, voltage/frequency ratio (2 or 5 points), ENA System
Speed range
3
D
Asynchronous motor
Transient overtorque
Functions
UL Type 12 (1) / IP54
0…599 Hz up to 37 kW - 0…500 Hz from 45…75 kW
INTERBUS, CC-Link.
Cards (available as an option)
Encoder interface cards, I/O extension cards, “Controller Inside” programmable card
C
Reduction of current harmonics
Optional chokes and passive filters
R
Integrated
C2 EMC
EM
As an option
External C1 EMC
EMC filter
Motor power
kW/HP
0.75/1
ATV71W075N4
TA2
ATV71E5075N4
TA2
1.5/2
ATV71WU15N4
TA2
ATV71E5U15N4
TA2
2.2/3
ATV71WU22N4
TA2
ATV71E5U22N4
TA2
3/–
ATV71WU30N4
TA3
ATV71E5U30N4
TA3
4/5
ATV71WU40N4
TA3
ATV71E5U40N4
TA3
5.5/7.5
ATV71WU55N4
TB
ATV71E5U55N4
TB
7.5/10
ATV71WU75N4
TB
ATV71E5U75N4
TB
11/15
ATV71WD11N4
TC
ATV71E5D11N4
TC
15/20
ATV71WD15N4
TD
ATV71E5D15N4
TD
18.5/25
ATV71WD18N4
TD
ATV71E5D18N4
TD
22/30
ATV71WD22N4
TD
ATV71E5D22N4
TD
30/40
ATV71WD30N4
TF
ATV71E5D30N4
TF
37/50
ATV71WD37N4
TF
ATV71E5D37N4
TF
45/60
ATV71WD45N4
TG
ATV71E5D45N4
TG
55/75
ATV71WD55N4
TG
ATV71E5D55N4
TG
75/100
ATV71WD75N4
TG
ATV71E5D75N4
TG
M
(1) For ATV71W... range only.
(2) SoMove setup software : available from 2011. Altivar 71 is also supported by Powersuite software workshop.
(1)
Other versions: please consult our Customer Care Centre.
3/28
tre.
Complex, high-power machines
Altivar 71Q
90…630 kW
125...700 HP
Water-cooled drives for harsh environments
Dimensions (in mm)
T11 : 330 x 950 x 377
T13 : 585 x 950 x 377
T15 : 1110 x 1150 x 377
width x height x depth
Type of drive
Supply voltage
Three-phase
380...480 V
Sideways and front IP31 - Top IP20 - Bottom IP00
Degree of protection
Drive
0.1...500Hz
Output frequency
Type of control
Asynchronous motor
Synchronous motor
Vector control without speed feedback
1…1000 in closed loop mode with encoder feedback, 1…100 in open loop mode
Speed range
Number of functions
> 150
Number of preset speeds
16
Number of I/O
Analog inputs
2…4
Logic inputs
6…20
Analog outputs
1…3
Logic outputs
0…8
Relay outputs
2…4
Safety input
1
3
Remote graphic display terminal, SoMove setup software (1)
Dialogue
Communication
Flux vector control with or without sensor, voltage/frequency ratio (2 or 5 points), ENA System
220% of nominal motor torque for 2 seconds, and 170% for 60 seconds
Transient overtorque
Functions
Three-phase
500...690 V
Integrated
Modbus and CANopen
As an option
Modbus TCP, Modbus/Uni-Telway, Fipio, Modbus Plus, Profbus DP, Profbus DP V1, DeviceNet,
EthernetIP, CC-Link, INTERBUS
Multi-pump cards, I/O extension cards, “Controller Inside” programmable card
Cards (available as an option)
Reduction of current harmonics
EMC filter
Motor power
Optional AC choke, Altivar AFE (Active Front End)
C3 EMC
Integrated
kW/HP
As an option
C1 EMC
90/125
ATV71QD90N4
T11
–
110/150
ATV71QC11N4
T11
–
132/200
ATV71QC13N4
T11
–
160/250
ATV71QC16N4
T13
–
200/300
ATV71QC20N4
T13
–
250/400
ATV71QC25N4
T13
–
315/500
ATV71QC31N4
T15
–
400/600
ATV71QC40N4
T15
–
500/700
ATV71QC50N4
T15
–
500 V
575 V
690 V
KW
HP
KW
90
125
110
–
ATV71QC11Y
T11
110
150
132
–
ATV71QC13Y
T11
132
-
160
–
ATV71QC16Y
T11
160
200
200
–
ATV71QC20Y
T13
200
250
250
–
ATV71QC25Y
T13
250
350
315
–
ATV71QC31Y
T13
315
450
400
–
ATV71QC40Y
T15
400
550
500
–
ATV71QC50Y
T15
ATV71QC63Y
T15
–
500
700
630
(1) SoMove setup software : available during 2011. Altivar 71 also works with the PowerSuite software workshop.
Other versions: please consult our Customer Care Centre.
3/29
Complex, high-power machines
Altivar LIFT
4…22 kW
5...30 HP
A
0.
0.
Drives for lifts
Dimensions (in mm) width x height x depth
without remote graphic terminal
: 175 x 295 x 161
T6 : 240 x 420 x 210
T5A : 210 x 295 x 187
T7 : 240 x 550 x 230
T4
T5B : 230 x 400 x 187
Type of drive
Supply voltage
Three-phase
200...240 V
IP20 for unprotected drives and IP41 on the upper part
Degree of protection
Drive
Asynchronous motor
Flux vector control with or without sensor, voltage/frequency ratio
Synchronous motor
Vector control with and without speed feedback
Transient overtorque
Number of functions
> 150
Number of preset speeds
16
Number of I/O
Analog inputs
2…4
Logic inputs
6…20
Analog outputs
1…3
Logic outputs
0…8
Relay outputs
2…4
Safety input
1
Modbus and CANopen
Integrated
Fipio, Ethernet, Modbus Plus, PROFIBUS DP, DeviceNet, Uni-Telway, INTERBUS
As an option
Encoder interface cards, I/O extension cards, “Controller Inside” programmable card,
Encoder emulation card
Cards (available as an option)
Integrated DC choke or supplied with the product
Reduction of current harmonics
EMC filter
Motor power
R
Remote graphic display terminal, SoMove setup software (1)
Dialogue
Communication
220% of nominal motor torque for 2 seconds, and 170% for 60 seconds
1…1000 in closed loop mode with encoder feedback, 1…100 in open loop mode
Speed range
3
D
0...599 Hz
Output frequency
Type of control
Functions
Ty
Three-phase
380...480 V
kW / HP / A
Integrated
C2 EMC up to 5.5 kW
As an option
External C2 EMC from 7.5 kW
4 / 5 / 10
–
ATV71LD10N4Z
T4
5,5 / 7,5 / 14
–
ATV71LD14N4Z
T4
5,5 / 7,5 / 27
ATV71LD27M3Z
7,5 / 10 / 17
–
7,5 / 10 / 33
ATV71LD33M3Z
11 / 15 / 27
–
11 / 15 / 54
ATV71LD54M3Z
15 / 20 / 33
–
15 / 20 / 66
ATV71LD66M3Z
22 / 30 / 48
–
(1) SoMove setup software : available from 2011. Altivar LIFT is also supported by Powersuite software workshop.
T5B
–
ATV71LD17N4Z
T5B
ATV71LD27N4Z
T6
T5B
–
ATV71LD33N4Z
T6
T5A
–
T5B
–
ATV71LD48N4Z
T7
Ty
D
R
Other versions: please consult our Customer Care Centre.
3/30
tre.
Altivar 71
0.37…630 kW
0.5...700 HP
Complex, high-power machines
I/O extension and specific cards
Type of card
I/O extension
Logic
Description
1 relay logic output (“C/O” contact)
4 x 24 VDC positive or negative logic inputs
2 x 24 VDC open collector positive or negative logic
outputs
1 input for PTC probes
1 x 0…20 mA differential current analog input
1 software-configurable voltage (0…10 VDC) or
current (0…20 mA) analog input
2 software-configurable voltage (±10V, 0…10 VDC)
or current (0…20 mA) analog inputs
1 relay logic output (“C/O” contact)
4 x 24 VDC positive or negative logic inputs
2 x 24 VDC open collector positive or negative logic
outputs, 1 input for PTC probes, 1 frequency control
input
Reference
VW3A3201
VW3A3202
Extended
"Controller Inside" programmable card
Type of card
Programmable “Controller Inside”
Description
10 logic inputs, 2 of which can be used for 2 counters or
4 of which can be used for 2 incremental encoders
2 analog inputs, 6 logic outputs, 2 analog outputs, a master port for the CANopen bus, a PC port for
programming with the PS 1131 software workshop
Reference
VW3A3501
Other versions: please consult our Customer Care Centre.
3/31
3
Encoder interface cards
Type of card
Encoder interface with
Differential outputs (RS422) Open collector outputs (NPN) Push-pull outputs
300 kHz
Operating frequency
Reference
5V
VW3A3401
–
–
12 V
–
VW3A3403
VW3A3405
15 V
VW3A3402
VW3A3404
VW3A3406
24 V
–
–
VW3A3407
3
Type of card (1)
Resolver
Universal
Sincos Absolute
Incremental with
emulation
Speed feedback resolution
12 bits
16 bits
16 bits
10,000
Encoder type supported
Resolver with
"SinCos,
Sincos Absolute
"Incremental
2, 4, 6 or 8 poles
SinCosHiperface
RS 422 - 5 V or 15 V"
EnDat, SSI"
References
VW3A3408
VW3A3409
VW3A3410
VW3A3411
Supported by Altivar LIFT and Altivar71 with S383 firmware version
Other versions: please consult our Customer Care Centre.
3/32
tre.
Notes
3
Other versions: please consult our Customer Care Centre.
3/33
Accessories
Options
Communication tools
Selection guide
For Altistart and Altivar range
Remote display Remote
Multi-loader
terminal
graphic display
(IP54 & IP65)
terminal
In
Simple Loader Dongle
Bluetooth®
(TM)
C
Altistart 01
C
Altistart 22
x
Altistart 48
x
Altivar 12
x
x
Altivar 212
3
Altivar 312
x
Altivar 31C
x
Altivar 32
x
C
D
x
x
x
Et
x
x
x
x
Et
x
x
x
x
Et
x
x
Et
IN
x
x
x
Altivar LIFT
x
x
x
x
Altivar 61
x
x
x
x
M
Altivar 71
x
x
x
x
M
Altivar 61 Plus
x
x
x
x
M
Altivar 71 Plus
x
x
x
x
M
Altivar 61Q (Water Cooled)
x
x
x
x
PR
Altivar 71Q (Water Cooled)
x
x
x
x
PR
Fi
PR
R
H
Lo
M
A
B
R
Accessories & Options
ALTISTART ALTIVAR
01
22
48
12
21
212
312
31C
Panel cut-out adaptor for mounting control unit at 90°
32
61
71
LIFT 61 Plus 71 Plus 61Q
71Q
x
Ferrite suppressors for downstream contactor opening
x
Additional EMC filter
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Sinus filters
x
x
x
x
x
x
x
x
Motor chokes
x
EMC conformity kit
x
UL Type 1 conformity kit
DNV kit
x
x
Passive filters
Line choke
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Mechanical base kit for mounting GV2 circuit-breaker
Mounting plates
x
x
x
x
x
Braking resistors for vertical movements
Braking resistors and braking units
References
●
x
x
x
x
x
x
x
x
x
x
x
x
x
If options or accessories not listed, please refer to the Schneider Electric catalogue.
For Altivar 1000 or 1100, please consult our Customer Care Centre.
A
st
Pa
R
C
Other versions: please consult our Customer Care Centre.
3/34
Q
Industrial protocols
ALTISTART ALTIVAR
01
22
48
12
212
Canopen
CANopen Daisy chain
CC-Link
Δ
DeviceNet
EtherCAT
Δ
Ethernet
Ethernet IP
Ethernet TCP/IP
INTERBUS S
31C
● ● ● ● ● ●
Modbus
Modbus Plus
○
Modbus TCP
Modbus/ Unitelway
○ ○
Δ
PROFIBUS DP
PROFIBUS DP V0
32
61
● ● ● ●
○
○
○ ○ ○ ○
○ ●
○
○ ○
○
Fipio
312
PROFIBUS DP V1
71
LIFT 61 Plus 71 Plus 61Q 71Q 1000 1100
● ●
●
●
● ● ○
○ ○
○ ○
●
○
○
○
○
○ ○
○ ○ ○
○
○
○
○ ○
○
○
●
○
○
○
○
○
○
○
○
●
○
○
○
○
○
○
○
○
●
○
○
○
○
○
○
○
○
●
○
○
○
○
○
○
○ ○ ○
○
○ ○
○ ○
● ● ●
○ ○
○ ○ ○
○ ○
○ ○ ○
○ ○ ○
○ ○ ○
Please refer to the Schneider Electric catalogue or consult our Customer Care Centre.
HVAC protocols
ALTISTART ALTIVAR
01
22
48
Metasys N2
Apogee FLN
BACnet
References
● Embedded
○ Option
12
212
○
●
●
●
312
31C
32
61
○
○
○
○
71
3
○
○
● ● ●
○
○
○
○ ● ●
○
○
References
Lonworks
●
LIFT 61 Plus 71 Plus 61Q 71Q 1000 1100
○
○
○
○
○
○
○
○
Please refer to the Schneider Electric catalogue or consult our Customer Care Centre.
Δ Gateway
x
Communication modules
x
x
x
x
x
tre.
Altistart 48/Altivar 31
starters/drives
Ethernet/
Modbus
DeviceNet/
Modbus
Fipio/Modbus
PROFIBUS DP/Modbus
Parameter setting
–
–
–
Standard
ABC configurator
configurator
program
References
Cable references
Bridge
TSXETG100
–
–
–
–
Gateway
–
LUFP9
LUFP1
LA9P307
LUFP7
L = 0.3 m
–
VW3A8306R03
VW3A8306R03
–
VW3A8306R03
L=1m
–
VW3A8306R10
VW3A8306R10
VW3P07306R10
VW3A8306R10
L=3m
VW3A8306D30
VW3A8306R30
VW3A8306R30
–
VW3A8306R30
Other versions: please consult our Customer Care Centre.
3/35
Selection guide
C Applications :
C Applications :
C
Lexium 32 is the perfect drive
system for applications involving
high-precision, dynamic positioning.
Lexium SDx stepper drives and
motors are used for short-distance
positioning applications requiring
maximum accuracy and high torque.
L
d
Servo Drives
Servo Motors
Stepper Drives
Stepper Motors
In
Lexium 32
Lexium BMH
Lexium SD2
Lexium BRS2
L
Lexium BSH
Lexium SD3
Lexium BRS3
L
3
Machines
Packaging machines
Material handling machines
Material working machines
Assembling machines
Printing machines
Labelling machines
Screen printing machines
F
P
M
Description
The Lexium 32 servo range consists of three
high-performance book-size servo drive
models – Lexium 32 Compact, Lexium 32
Advanced and Lexium 32 Modular – and
two motor families – the versatile mediuminertia Lexium BMH and the dynamic lowinertia Lexium BSH.
The Lexium SDx stepper motor drive range
consists of two high-precision stepper drive
lines – the three-phase stepper drives
Lexium SD3 and the two-phase stepper
drives Lexium SD2. These drive lines are
complemented by two perfectly matched
stepper motor families – Lexium BRS3 threephase stepper motors and Lexium BRS2
two-phase stepper motors.
T
p
e
w
Power range
Voltage range
Speed
Torque
Communication interfaces
0.15…7 kW
115…240 VAC, 400…480 VAC
up to 8000 rpm
up to 84 Nm
CANopen, CANmotion, PROFIBUS DP,
DeviceNet, EtherNet/IP
up to 750 W
24…48 VDC, 115…240 VAC
up to 1000 rpm
up to 16.5 Nm
CANopen, CANmotion, PROFIBUS DP or
Pulse/Direction
1
2
u
u
R
E
Safety function (STO) on board
Enhanced Safety Module (SS1, SS2, SLS,
SOS)
Encoder module for digital and analog
encoders and resolvers
Safety function (STO) on board
(Lexium SD3 28)
S
(L
3/36
Other versions: Please consult your Schneider Electric sales office.
S
C Applications :
C Applications :
Lexium Integrated Drives allow for extremely space-saving
decentralised motion solutions.
The Lexium Linear Motion products are designed for
maximum flexibility, performance and cost-effectiveness.
This range offers products for all linear movements in the
automation industry from single-axis to multi-axis systems.
Integrated Drives
Linear Motion
.
s
Lexium ILA
Lexium ILE
Lexium ILS
Lexium PAS
Lexium CAS
3
Lexium ILP / ILT
Lexium TAS
Lexium MAX
Format adjustment
Printing machines
Material handling machines
Material handling machines
Material working machines
On-the-fly working machines
Assembling machines
The Lexium ILx Integrated Drives comprise motor, positioning controller,
power electronics, fieldbus and “Safe Torque Off” safety function in an
extremely compact single device. Lexium ILx Integrated Drives are available
with all important motor technologies (servo, brushless DC, stepper).
Lexium Linear Motion is a comprehensive linear motion range
comprising Lexium PAS portal axes, Lexium TAS linear tables, Lexium
CAS cantilever and telescopic axes and Lexium MAX
multi-axis systems.
100…370 W
24…48 VDC, 115 to 240 VAC
up to 9000 rpm
up to 12 Nm
RS485, CANopen, PROFIBUS DP, DeviceNet, EtherNet/IP, EtherCAT,
Ethernet POWERLINK, Modbus TCP, Pulse/Direction
Single axes:
Stroke up to 5.5 m
Load up to 150 kg
Speed up to 8 m/s
Multi axes:
Stroke up to 5.5 m
Load up to 130 kg
Speed up to 4 m/s
Available as individual components or completely
pre-assembled, customised systems with drives and motors
e-
ce.
Safety function (STO) on board
(Lexium ILA, Lexium ILE, Lexium ILS)
Stand-alone device with controller inside (Lexium ILP)
Other versions: Please consult your Schneider Electric sales office.
3/37
L
Selection guide
C Applications :
Lexium Motion Controllers can be used as a stand-alone motion and
automation controllers for machines without a PLC or as pure motion
controllers for machines in which a PLC takes care of automation control.
Axis controller
C
D
C
Lexium Motion Controllers
In
In
Ex
3
N
N
C
R
Machines
Packaging machines
Material handling machines
Material working machines
Assembling machines
Description
The compact LMC Lexium Motion Controllers are used to control multiple synchronised
axes via a motion bus and feature high performance coupled with economy.
Technical information
Synchronisation of up to 4 axes in 2 ms
Synchronisation of up to 8 axes in 4 ms
PLCopen function blocks single / multi axis control
Application function blocks (Rotary knife, Flying shear, Clamping, Grouping/Ungrouping)
Communication interfaces
Modbus, CANmotion, Profibus DP, DeviceNet, Ethernet TCP/IP (for programming)
Other versions: please consult our Customer Care Centre.
3/38
tre.
Lexium Controller
Motion control
Motion controller
Controller type
Optimised
Drive synchronisation
Up to 4 axes
2 ms
CAN Motion bus
Up to 8 axes
4 ms
Interpolation of drive position loops
250 µs
Internal memory
RAM
1 MB
Flash Eeprom
1 MB
Expert application
Protected RAM
60 Kb
Application function blocks
yes
Single-axis PLCopen control
yes
Multi-axis PLCopen control
yes
2D interpolation
yes
3
8
8
Modbus
yes
yes
yes
yes
CANopen automation
–
yes
yes
yes
Ethernet TCP/IP
–
yes
yes
yes
Profibus DP V1
–
–
yes
–
Device Net
–
–
–
yes
LMC10
LMC20
LMC20A1307
LMC20A1309
Number of logic outputs
Reference
Extended
8 + 4 Fast inputs
Number of logic inputs
Communication
Standard
Software solutions
Easy Motion… for configuring
motion control functions
b Axis parameter setting
b Drive and controller adjustment and diagnostics
b Creation of position registers via the Teach function
b Management of axis operating modes and manual control
b Configuration of positioning tasks
b Editing cam profiles
b Application back up and restore
Motion Pro… for configuring and programming
motion control functions
b Retains the same benefits as Easy Motion mode for motion control
b Creates the whole application, control system function and motion control
function, using the programming editor conforming to standard IEC 61131
b Saves the machine signature
b Protection of application programs
Other versions: please consult our Customer Care Centre.
3/39
Motion control
Lexium 32
Lexium 32 Servo Drives and Motors
Main functions
Communication
Lexium 32 Compact
Lexium 32 Advanced
Lexium 32 Modular
M
Integrated
Modbus serial link
Pulse train
Modbus serial link
CANopen, CANmotion machine bus
Modbus serial link
Pulse train
A
As an option
–
–
CANopen, CANmotion machine
bus, DeviceNet, EtherNet/IP,
PROFIBUS DP
C
Operating modes
3
Functions
Manual mode (JOG)
Electronic gearbox
Speed control
Current control
Homing
Manual mode (JOG)
Speed control
Current control
Position control
Homing
Manual mode (JOG)
Motion sequence
Electronic gearbox
Speed control
Current control
Position control
Auto-tuning, monitoring, stopping, conversion
–
Stop window
Rapid entry of position values
24 V c logic inputs
6, reassignable
3, reassignable
Stop window
Rapid entry of position values
Rotary axes
Position register
4, reassignable
24 V c capture inputs (1) (2)
–
1
2
24 V c logic outputs (1)
5, reassignable
2, reassignable
3, reassignable
Analog inputs
2
–
Pulse control input
1, configurable as: RS 422 link
5 V or 24 V push-pull
5 V or 24 V open collector
RS 422 link
ESIM PTO output
Safety functions
Sensor
Integrated
“Safe Torque Off” STO
As an option
–
Integrated
SinCos Hiperface® sensor
As an option
–
Safe Stop 1 (SS1) and Safe Stop 2
(SS2)
Safe Operating Stop (SOS)
Safe Limited Speed (SLS)
Resolver encoder
Analog encoder
Digital encoder
Architecture
Control via:
Logic or analog I/O
Control via:
Motion controller via CANopen
and CANmotion machine bus
Control via:
Schneider Electric or third-party
PLCs via communication buses
and networks
Type of servo drive
LXM 32C
LXM 32A
LXM 32M
Other versions: please consult our Customer Care Centre.
3/40
Fl
En
D
Ty
Main functions
Application type
High load, With robust adjustment of the movement
High dynamic range, Power density
Flange size
70, 100, 140 and 205 mm
55, 70, 100 and 140 mm
Continuous stall torque
1.2 to 84 Nm
0.5 to 33.4 Nm
Encoder type
Single turn SinCos: 32,768 points/turn
and 131,072 points/turn
Multiturn SinCos: 32,768 points/turn x 4096 turns
and 131,072 points/turn x 4096 turns
Single turn SinCos: 131,072 points/turn
Multiturn SinCos: 131,072 points/turn x 4096 turns
Degree of protection
Type of servo motor
Casing
IP 65 (IP 67 conformity kit as an option)
Shaft end
IP 50 or IP 65 (IP 67 conformity kit as an option)
Lexium BMH
3
Lexium BSH
p2
tre.
Other versions: please consult our Customer Care Centre.
3/41
Lexium 32 motion control
Lexium 32
Servo drive/servo motor combinations
Lexium 32 servo drive/BMH or BSH servo motor combinations
Servo motors
Lexium 32C, 32A and 32M servo drives
100…120 V single-phase supply voltage with integrated EMC filter
LX
BMH
BSH
LXM 32pU90M2
(IP50, IP65 or IP67)
(IP50, IP65 or IP67)
Continuous output current: 3 A rms
C
Nominal operating point
3
Type of
servo motor
Rotor
inertia
BMH 0701T
N
Nominal
speed
Nominal
power
M0/Mmax
N
to
Nm
rpm
W
Nm/Nm
N
0.49
3000
150
0.5/1.5
0.77
3000
250
0.8/1.9
Type of
servo motor
Rotor
inertia
Nominal
torque
kgcm2
BSH 0551T
0.06
BSH 0552T
0.10
BSH 0553T
0.13
BSH 0701T
0.25
BSH 0702T
0.41
BSH 1001T
1.40
kgcm2
Stall torques
1.
1.
0.59
BMH 0702T
1.13
BMH 0703T
1.67
BMH1001T
3.2
BMH1002T
6.3
1.
Lexium 32 servo drive/BMH or BSH servo motor combinations
Servo motors
Lexium 32C, 32A and 32M servo drives
200…240 V single-phase supply voltage with integrated EMC filter
BMH
BSH
LXM 32pU45M2
(IP50, IP65 or IP67)
(IP 50, IP65 or IP67)
Continuous output current: 1.5 A rms
LX
C
Nominal operating point
Type of
servo motor
Rotor
inertia
N
Rotor
inertia
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
N
to
kgcm2
Nm
rpm
W
Nm/Nm
N
BSH 0551T
0.06
0.45
6000
300
0.5/1.4
BSH 0552T
0.10
0.
BSH 0553T
0.13
0.
BSH 0701T
0.25
Type of
servo motor
kgcm2
BMH 0701T
Stall torques
0.
1.
0.59
BMH 0702T
1.13
BMH 0703T
1.67
BMH 1001T
3.2
BMH 1002T
6.3
BMH 1003T
9.4
BMH 1401P
16.5
BSH 0702T
0.41
BSH 0703T
0.58
BSH 1001T
1.40
BSH 1002T
2.31
Other versions: please consult our Customer Care Centre.
3/42
tre.
LXM 32pU18M2
LXM 32pD30M2
Continuous output current: 6 A rms
Continuous output current: 10 A rms
Nominal operating point
Stall torques
Nominal operating point
Stall torques
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
Nm
rpm
W
Nm/Nm
Nm
rpm
W
Nm/Nm
1.14
3000
350
1.2/3.3
1.35
2500
350
1.4/4.2
1.36
2500
350
1.4/3.5
2.07
2500
550
2.2/6.1
2.3
2500
600
2.5/6.4
3.1
2000
650
3.4/8.7
2.75
2500
700
3.3/6.3
3.3
2000
700
3.4/8.9
3.5
2000
750
6/10.3
LXM 32pU90 M2
LXM 32pD18M2
Continuous output current: 3 A rms
Continuous output current: 6 A rms
Nominal operating point
LXM 32pD30M2
Stall torques Nominal operating point
Continuous output current: 10 A rms
Stall torques Nominal operating point
Stall torques
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
Nm
rpm
W
Nm/Nm
Nm
rpm
W
Nm/Nm
Nm
rpm
W
Nm/Nm
0.74
6000
450
0.8/2.5
0.84
6000
550
1.2/3
0.94
5000
500
1.3/3.5
1.1
4000
450
1.4/4
3
1.8
5000
950
2.2/7.2
2.1
4000
900
2.6/7.4
2.1
4000
900
2.5/7.4
2.2
4000
900
2.7/7.5
2.9
3000
900
3.4/10.2
2.8
3000
900
3.4/10.2
3.7
4000
1500
5.8/16.4
4.6
3000
1450
6/18.4
5.6
2500
1450
8.2/22.8
6.9
2000
1450
10.3/30.8
Other versions: please consult our Customer Care Centre.
3/43
Lexium 32 motion control
Lexium 32
Servo drive/servo motor combinations
Lexium 32 servo drive/BMH or BSH servo motor combinations
Servo motors
Lexium 32C, 32A and 32M servo drives
380…480 V three-phase supply voltage with integrated EMC filter
BMH
BSH
LXM 32pU60N4
LXM 32pD12N4
(IP50, IP65 or IP67)
(IP50, IP 65 or IP67)
Continuous output current: 1.5 A rms
Continuous output current: 3 A rms
Type of
servo motor
Type of
servo motor
Rotor
inertia
Nominal
torque
kgcm2
Nm
rpm
BSH 0551P
0.06
0.48
6000
BSH 0552P
0.10
0.65
6000
400
0.8/2.5
BSH 0553P
0.13
0.65
6000
400
1.05/3.5
1.1
3000
350
1.2/4.2
Nominal operating point
3
Rotor
inertia
kgcm2
BMH 0701P
0.59
BMH 0701P
0.59
Nominal
speed
Stall torques Nominal operating point
LX
C
Stall torques
N
M0/Mmax
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
N
to
W
Nm/Nm
Nm
rpm
W
Nm/Nm
N
300
0.5/1.5
Nominal
power
1.3
5000
700
1.4/4.2
BSH 0701P
0.25
1.32
5000
700
1.4/3.5
BSH 0702P
0.41
1.64
5000
850
2.2/7.6
BMH 1001P
3.2
1.9
4000
800
3.3/10.8
BMH 0702P
1.13
2.2
3000
700
2.5/7.4
BMH 0703P
1.67
BMH 1001P
3.2
BMH 1002P
6.3
BMH 1003P
9.4
BMH 1401P
16.5
BMH 1402P
2.
BSH 0703P
0.58
2.
BSH 1001P
1.40
2.
3.
3.
BSH 1002P
2.31
BSH 1003P
3.2
BSH 1004P
4.2
BSH 1401P
7.4
BSH 1402T
12.7
BSH 1403T
17.9
BSH 1404P
23.7
4
32.0
BMH 1403P
47.5
BMH 2051P
71.4
BMH 2052P
129
BMH 2053P
190
Other versions: please consult our Customer Care Centre.
3/44
es
tre.
LXM 32pD18N4
Continuous output current: 6 A rms
Nominal operating point
LXM 32pD30N4
Continuous output current: 10 A rms
Stall torques Nominal operating point
LXM 32pD72N4
Continuous output current: 24 A rms
Stall torques Nominal operating point
Stall torques
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
Nominal
torque
Nominal
speed
Nominal
power
M0/Mmax
Nm
rpm
W
Nm/Nm
Nm
rpm
W
Nm/Nm
Nm
rpm
W
Nm/Nm
2.4
5000
1300
3.4/10.2
2.44
5000
1300
3.1/11.3
2.7
4000
1100
3.3/9.6
3.1
4000
1300
3.4/10.2
3.9
4000
1600
6.2/18.4
4
4000
1700
5.8/18.3
6.2
4000
2600
8.4/25.1
6.3
3000
2000
8/28.3
7.6
3000
2400
10.3/30.8
8.3
2500
2100
10/37.9
9.5
2500
2500
11.1/27
12.1
3000
3800
16.8/50.3
12.3
3000
3900
19.5/59.3
12.9
3000
4100
27.8/90.2
14.2
3000
4500
24/71.8
19
2500
5000
33.4/103.6
25.8
2000
5400
34.4/103.4
41.6
1500
6500
62.5/170
52.2
1200
6500
84/232
3
Other versions: please consult our Customer Care Centre.
3/45
Lexium 32
Motion Control
L
Configuration tools
Multi-Loader configuration tool
Use
3
Reference
For downloading configurations from a PC or drive and duplicating them on another drive.
The drives do not need to be powered-up.
Supplied with:
1 cordset equipped with 2 RJ45 connectors
1 cordset equipped with one type A USB connector and one mini B USB connector
1 x 2 GB SD memory card
1 x female/female RJ 45 adaptor
4 AA 1.5 V LR6 round batteries
Le
R
VW3 A8 121
Le
R
Single memory card
Pack of 25 memory cards
Use
Used to store parameters of the Lexium 32 servo drive.
Another Lexium 32 servo drive can be commissioned immediately if the application is undergoing
maintenance or duplication.
Reference
VW3 M8 705
VW3 M8 704
eS
R
Memory card recorder
Use
Writes data from the Lexium 32 servo drive to the memory card.
This recorder is not supplied by Schneider Electric.
Reference
See the User's manual
D
Fr
SoMove setup software
The SoMove setup software is used to configure, adjust, debug and maintain the Lexium 32 servo drive,
as for all other Schneider Electric variable speed drives and starters.
It communicates via Bluetooth® wireless link with the servo drive, which is equipped with the ModbusBluetooth® adaptor (VW3 A8 114).
To
C
Le
R
SoMove Mobile application for mobile phone
The SoMove Mobile software converts any compatible mobile phone into a remote graphic display
terminal, offering an identical Human-Machine Interface.
Particularly suitable for on-site or remote maintenance operations, the SoMove Mobile software can be
used to print out and save configurations, import them from a PC and export them to a PC, or to a servo
drive equipped with the Modbus adaptor via the Bluetooth® wireless link.
D
Fr
To
C
Le
R
Other versions: please consult our Customer Care Centre.
3/46
,
o
tre.
Lexium 32
Motion Control
Modules for Lexium 32M
Communication modules
Lexium 32M can be connected to the following communication buses and networks: CANopen and CANmotion, DeviceNet, Profibus DP V1, EtherNet/IP
Reference CANopen / CANmotion module with 2 * RJ 45 connectors
VW3 A3 608
CANopen / CANmotion module with SUB-D 9 connector
VW3 A3 618
DeviceNet module
VW3 M3 301
Profibus DP V1 module
VW3 A3 607
EtherNet/IP module
VW3 A3 616
Module CANopen / CANmotion avec bornier 5 points de vis VW3 A3 628
Module EtherCAT with 5 points screw terminal
3
VW3 A3 601
Second encoder modules
Machine
Motor
Lexium 32M has an input for an additional encoder to connect third party motor (motor encoder) or to improve positioning accuracy (machine encoder)
Reference Module for resolver encoder
VW3 M3 401
x
Module for digital encoder (A/B/I, BiSS, EndDat 2.2, SSI)
VW3 M3 402
x
Module for analog encoder (1 Vpp/Hall, 1 Vpp, Hiperface)
VW3 M3 403
x (Hiperface only)
x
Safety module
eSM safety module allows Lexium 32M servo drives to access additionnal IEC/EN 61800-5-2 safety functions: SS1, SS2, SLS, SOS
Reference eSM safety module allows
VW3 M3 501
Connection elements
Power cordsets
Description
Cables equipped with one M23 industrial connector
Cables equipped with one
(servo motor end)
M40 industrial connector
(servo motor end)
From servo motor
BMH 070pp, BMH 100pp,
BMH 1402P, BMH 1403P
BMH 1401P, BSH 055pp,
BMH 205pP, BSH 1402T,
BSH 1403T, BSH 1404P
BSH 070pp, BSH 100pp,
BSH 1401P
To servo drive
LXM 32pppppp
LXM 32pD72N4
LXM 32pD72N4
Composition
[(4 x 1.5 mm2) + (2 x 1 mm2)]
[(4 x 2.5 mm2) + (2 x 1 mm2)]
[(4 x 4 mm2) + (2 x 1 mm2)]
Length
3m
3m
3m
Reference
VW3 M5 101 R30
VW3 M5 102 R30
VW3 M5 103 R30
Encoder cordsets
Description
SinCos Hiperface® encoder cables equipped with an M23 industrial connector (servo motor end)
and an RJ45 connector with 8 + 2 contacts (servo drive end)
From servo motor
BMH ppppp, BSH ppppp
To servo drive
LXM 32pppppp
Composition
[3 x (2 x 0.14 mm2) + (2 x 0.34 mm2)]
Length
3m
Reference
VW3 M8 102 R30
Other versions: please consult our Customer Care Centre.
3/47
Lexium SDp
L
Motion Control
Stepper drives and stepper motors
Assignment of BRS2 2-phase stepper motors and SD2 stepper motor drives
BRS2 2-phase stepper motors
In
SD21ppU20C
SD21ppU50C
24…48 V; 3 A
24…48 V; 5 A
BRS236
0.07 Nm
–
BRS242
0.23…0.53 Nm
–
BRS257
0.64…1.69 Nm
0.64…1.69 Nm
BRS285
–
2.96…9.20 Nm
Ty
Ty
M
3
D
Pr
En
M
C
A
D
Assignment of BRS3 3-phase stepper motors and SD3 stepper motor drives
co
BRS3 3-phase stepper motors
SD326pU25
SD328pU25
SD326pU68
SD328pU68
D
115 V / 230 V; 2.5 A; including mains filter
115 V / 230 V; 6.8 A; including mains filter and fan
ch
BRS368
1.7 Nm / 1.5 Nm
–
M
BRS397
2.3 Nm / 2.0 Nm
–
BRS39A
4.5 Nm / 4.0 Nm
–
BRS39B
6.8 Nm / 6.0 Nm
–
BRS3AC
–
13.5 Nm / 12.0 Nm
BRS3AD
–
19.7 Nm / 16.5 Nm
A
R
Assignment of stepper motors, stepper motor drives SD3 15
3-phase stepper motors
SD3 15
24…48 VDC; max. 10 A
Motors with F winding
BRS 364F
0.46 Nm / 0.40 Nm
BRS 366F
0.92 Nm / 0.80 Nm
BRS 368F
1.50 Nm / 1.30 Nm
BRS 397F
2.00 Nm / 1.85 Nm
BRS 39AF
4.20 Nm / 3.40 Nm
BRS 39BF
5.55 Nm / 4.80 Nm
Motors with H winding
BRS 364H
0.51 Nm / 0.45 Nm
BRS 366H
1.02 Nm / 0.90 Nm
BRS 368F
1.70 Nm / 1.50 Nm
BRS 397H
2.26 Nm / 2.00 Nm
BRS 39AH
4.80 Nm / 4.00 Nm
BRS 39BH
6.50 Nm / 5.75 Nm
Other versions: please consult our Customer Care Centre.
3/48
tre.
Lexium ILp
Motion Control
Lexium Integrated Drives
Integrated Drives
Lexium ILA
Lexium ILE
Lexium ILS
Type of process
Dynamic process and
accurate positioning
Automatic format
adjustement
Short distance movements with accurate positioning
Type of technology
Integrated drive with
servo motor
Integrated drive with
dc brushless motor
Integrated drive with
Integrated drive with
three-phase stepper motor two-phase stepper motor
Main characteristics
Highly dynamic
Compact
Integrated holding
brake in option
Hight holding torque
without power
Integrated gearbox
in option
Hight torque at low speed
Dynamic
gggg
gggg
ggggg
gg
gg
gggg
ggg
gggg
gg
ggg
gggg
gg
Pulse/direction
Input/output
Pulse/direction
Input/output
Precision and stability
Energy saving
Motor inertia
Control interface
Lexium ILP / ILT
3
Medium
Control signals
Input/output
Bus and networks
CANopen, PROFIBUS DP, RS 485 serial link, DeviceNet, EtherCAT, Modbus
TCP, Ethernet Powerlink, EtherNet/IP
CANopen, RS485
Motion bus
–
Association
Nominal power
150...305W
100...350W
100...350W
100...350W
Drive/motor
Nominal speed
500...9000 min-1
1500...7000 min-1
0...1000 min-1
0...1000 min-1
combinations
Nominal torque
0.26...0.78 Nm
0.18...0.5 Nm
0.45...6 Nm
0.11...5.87 Nm
Drive
Safety function
“Safe Torque Off”
Type of sensor (resolution) (1)
Single turn SinCos
Absolute value encoder Index pulse monitoring
encoder
(12...1380 increments/turn)
(16.384 increments/turn)
Multiturn SinCos encoder
(16.384 increments/turn
× 4096 turns)
Index pulse monitoring
Motor flange size
57
36, 42, 57, 85
characteristics
Motor characteristics
66
57, 85
Accessories
Cable, Connector kits, Installation sets, Commissioning tools, Planetary
gearboxes
Cable, Connector kits,
Installation sets,
Commissioning tools
References
ILA
ILP
ILE
ILS
ILT
Other versions: please consult our Customer Care Centre.
3/49
Lexium ILA/ILE/ILS
L
Motion Control
Lexium Integrated Drives
Lexium ILA with Servo Motor
Nominal Torque Maximum Torque Nominal Speed
(Nm)
(Nm)
(Rpm)
Maximum Speed Nominal Power
(Rpm)
(W)
ILS1 for CANopen, PROFIBUS DP, RS485, Pulse-Direction, Motion Sequence Mode
IL
ILA1p571P
0.26
0.6
5500
7500
150
IL
ILA1p571T
0.26
0.43
7500
11500
200
IL
ILA1p572P
0.45
0.72
4300
6200
200
IL
ILA1p572T
0.41
0.61
5000
7500
215
IL
ILA2 for DeviceNet, EtherCAT, EtherNet/IP, Modbus TCP, Ethernet Powerlink
3
L
IL
ILA2p571P
0.44
0.62
5100
7000
235
IL
ILA2p571T
0.31
0.45
7000
9000
255
IL
ILA2p572P
0.78
1.62
3400
4300
275
IL
ILA2p572T
0.57
0.85
5100
6800
305
IL
IL
IL
IL
Lexium ILE with included spurwheel gearbox.
Ratios:18:1, 38:1, 54:1, 115:1
IL
IL
Lexium ILE with included worm gearbox with hollow shaft.
Ratios: 24:1, 54:1, 92:1, 115:1
Lexium ILE with Brushless DC Motor
IL
IL
Nominal Torque
(Nm)
Detent Torque
(Nm)
Nominal Speed
(Rpm)
Maximum Speed
(Rpm)
ILE1p661
0.24
0.08
4800
5000
ILE1p661 spurwheel gearing
up to 11.0
up to 8.0
44
44
ILE1p661 worm gearing
up to 10.6
up to 16.7
44
44
IL
IL
ILE1 for CANopen, PROFIBUS DP, RS485
ILA2 for DeviceNet, EtherCAT, EtherNet/IP, Modbus TCP, Ethernet Powerlink
ILE2p661
0.26
0.08
6000
7000
ILE2p661 spurwheel gearing
up to 12
up to 9.19
44
44
ILE2p661 worm gearing
up to 10.6
up to 16.7
44
44
ILE2p662
0.5
0.106
5000
7000
Lexium ILS with three-phase Stepper Motor
Maximum Torque
(Nm)
Holding Torque
(Nm)
Speed
(Rpm)
ILS1 for CANopen, PROFIBUS DP, RS485, Pulse-Direction, Motion Sequence Mode
ILS1p571p
0.45
0.51
1000
ILS1p572p
0.9
1.02
600
ILS1p573p
1.5
1.7
450
ILS1p851p
2.0
2.0
450
ILS1p852p
4.0
4.0
200
ILS1p853P
6.0
6.0
120
ILS1p853T
4.5
4.5
300
ILS1 for CANopen, PROFIBUS DP, RS485, Pulse-Direction, Motion Sequence Mode
ILS2p571p
0.45
0.51
1100
ILS2p572p
0.9
1.02
900
ILS2p573p
1.5
1.7
600
ILS2p851p
2.0
2.0
600
ILS2p852p
4.0
4.0
380
ILS2p853P
6.0
6.0
200
ILS2p853T
4.5
4.5
300
Other versions: please consult our Customer Care Centre.
3/50
IL
IL
IL
IL
IL
r
tre.
Lexium ILP/ILT
Motion Control
Lexium Integrated Drives
Lexium ILP, Lexium ILT with two-phase Stepper Motor
Nominal Torque
(Nm)
Holding Torque
(Nm)
Maximum Speed
(Rpm)
ILP2R361
0.11
0.11
1800
ILP2R421
0.19
0.19
1500
ILP2R422
0.33
0.33
1500
ILP2R423
0.39
0.39
1500
ILP2R571
0.63
0.63
1500
ILP2R572
0.86
0.86
1500
ILP2R573
1.44
1.44
1500
ILP2R574
1.77
1.77
1500
ILP2R851
2.13
2.13
1000
ILP2R852
3.12
3.12
1000
ILP2R853
5.87
5.87
1000
ILT2p361
0.11
0.11
1800
ILT2p421
0.19
0.19
1500
ILT2p422
0.33
0.33
1500
ILT2p423
0.39
0.39
1500
ILT2p571
0.63
0.63
1500
ILT2p572
0.86
0.86
1500
ILT2p573
1.44
1.44
1500
ILT2p574
1.77
1.77
1500
ILT2p851
2.13
2.13
1000
ILT2p852
3.12
3.12
1000
ILT2p853
5.87
5.87
1000
ILP for RS485 with programmable interface
3
ILT for Pulse/Direction, CANopen
Other versions: please consult our Customer Care Centre.
3/51
Motion Control
Lexium Linear Motion
Linear axes
Product
Lexium PAS B
Axis type
Portal axes
Li
Number of directions
1
1
Movement type
Typically horizontal
Ty
Position of the load
On carriage
Movement
Drive
3
Toothed belt
Lexium PAS S
L
O
Ballscrew
B
Type of guide
Ball or roller
Ball
D
Main characteristics
High dynamic response, Long stroke length, High
positioning speed
High precision movement (positioning, repeatability,
guiding), High feed forces, High rigidity
Dynamic response
ggggg
ggg
H
re
H
m
g
Precision
ggg
ggggg
g
Maximum payload
100 kg
100 kg
15
Maximum driving force
2600 N
4520 N
25
Maximum speed of movement of the load
8 m/s
1.25 m/s
1
Maximum working stroke
5500 mm
3000 mm
15
Repeatability
± 0.05 mm
± 0.02 mm
±
Options
Choice of guide type: Ball (for applications requiring
high forces and torques) or roller (simple, costeffective solution), Wide range of sensors, Choice of
carriage type for adapting to the load, Option to add
carriages, Protective metal strip.
Choice of pitch , Protective metal strip, Wide range of
sensors, Choice of carriage type for adapting to the
load, Option to add carriages, Option to add
ballscrew supports for longer axes
C
m
Reference
PAS 4pB
PAS 4pS
TA
Lexium MAX S
L
Multi-axis systems
Product
Lexium MAX H
Axis type
Movement
Number of directions
Movement type
Z
X
Double portal axes
L
1
2
Combination of two parallel axes
H
Z-
Y
Position of the load
On two parallel carriages
O
Multi-axis system type
PAS 4pB axes + PAS 4pH support axis
(driven by the load)
PAS 4pB + PAS 4pB axes
(shaft-driven)
M
M
Drive
Toothed belt on one axis
Toothed belt on both axes
To
Type of guide
Ball or roller
Ball or roller
B
Main characteristics
Long stroke length, High dynamic response, High
precision movement (positioning, guiding)
Long stroke length, High precision movement
(positioning, guiding), High feed forces
D
250 kg
300 kg
50
Maximum payload
On the X-axis
5500 mm
55
On the Y-axis
–
–
On the Z-axis
–
12
Options
Choice of guide type: Ball (for applications requiring high forces and torques) or roller (simple, cost-effective
solution), Protective metal strip, Anti-corrosion version, Anti-static belt, Wide range of sensors, Several
different motor mounting options, Variable distance between the two axes
C
S
Reference
MAX H
M
Maximum working
stroke
MAX S
Other versions: please consult our Customer Care Centre.
3/52
y,
of
e
ve
tre.
Lexium TAS
Lexium CAS 4
Lexium CAS 3
Lexium CAS 2
Linear tables
Cantilever axes with mobile structure on
Cantilever axes with mobile structure on
Telescopic axes
profile
parallel rods
1
Typically horizontal
Typically vertical
Typically horizontal
On carriage
On the side of the profile or on the 2 end blocks On the 2 end blocks
On carriage
Ballscrew
Toothed belt
Toothed belt or rack
Toothed belt
Double, ball
Ball or roller
Ball
Ball or roller
High precision movement (positioning,
repeatability, guiding), High feed forces,
High rigidity, Feed movement without
mechanical backlash
gg
Long stroke length, High feed forces, Option Compact, Mobile structure with light travel
to mount the load on the side of the profile or weight
on the end blocks, High rigidity
Long stroke length from a compact unit,
High rigidity, High dynamic response
gggg
gggg
gggg
gggggg
ggg
ggg
gg
150 kg
50 kg
18 kg
35 kg
2580 N
2150 N
705 N
1500 N
1 m/s
3 m/s
3 m/s
3 m/s
1500 mm
1200 mm
500 mm
2400 mm
± 0.02 mm
± 0.05 mm
± 0.05 mm
± 0.1 mm
Choice of pitch , Several different motor
mounting options
Choice of guide type: Ball (for applications
requiring high forces and torques) or roller
(simple, cost-effective solution), Protective
metal strip, Anti-corrosion version, Wide
range of sensors
Anti-corrosion version, Anti-static belt
Choice of guide type: Ball (for applications
requiring high forces and torques) or roller
(simple, cost-effective solution), Choice of
carriage type for adapting to the load
TAS 4
CAS 4
CAS 3
CAS 2
Lexium MAX P
Lexium MAX R2
Linear positioners
Portal robots
2
3
Lexium MAX R3
3
Horizontal and vertical: Combination of one X-axis and one Horizontal: Combination of two perpendicular axes X and Y Horizontal and vertical: Combination of two perpendicular
Z-axis
axes X and Y and one Z-axis
On the side or on the end blocks of the Z-axis profile
On the Y-axis carriage
On the side or on the end blocks of the Z-axis profile
MAX S + CAS 4 axes
MAX S + CAS 3 axes
MAX S + MAX H axes
MAX S + PAS 4pB axes
MAX S + MAX H + CAS 4 axes
MAX S + MAX H + CAS 3 axes
Dynamic load positioning
Long stroke length on both axes
Long stroke length on three axes
50 kg
130 kg
50 kg
–
1500 mm
1500 mm
1200 mm
–
1200 mm
Toothed belt on each axis
Ball or roller
5500 mm
Choice of guide type: Ball (for applications requiring high forces and torques) or roller (simple, cost-effective solution), Wide range of sensors
Supplied as standard: Protective metal strip , Anti-corrosion version
MAX P
MAX Rp2
MAX Rp3
Other versions: please consult our Customer Care Centre.
3/53
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement