CO-9B FireAngel Manual
CO-9B User Manual
CARBON MONOXIDE
POISONOUS GAS ALARM
CONTENTS
INTRODUCTION
FEATURES
2
2
CARBON MONOXIDE AND
HOW IT CAN AFFECT YOU
AND YOUR FAMILY
3
WHERE TO INSTALL YOUR
DETECTOR
5
HOW TO INSTALL YOUR
DETECTOR
7
BATTERY INSTALLATION/
REPLACEMENT
8
OPERATING FEATURES
9
UNDERSTANDING THE
PRODUCT’S INDICATORS
12
MAINTAINING / TESTING
YOUR DETECTOR
13
WHAT TO DO IN THE EVENT
OF AN ALARM
14
USEFUL NUMBERS
15
TECHNICAL INFORMATION
16
DISPOSAL
17
7 YEAR WARRANTY
18
RETURNS
19
PRODUCT RANGE
19
NOTES
20
NOTE: This User Manual is also available in large
text and other formats. Please call 0800 141 2561
for further information
INTRODUCTION
FEATURES
Congratulations! You’ve made a wise
investment in an innovative product and
your personal safety. ­The CO-9B Carbon
Monoxide Poisonous Gas Alarm is one of a
new generation of domestic life safety products
from FireAngel Limited, which combines the
latest technology and innovative design to
provide an aesthetically pleasing and effective
contribution to your home safety.
• An advanced electrochemical sensor
designed to accurately measure low levels
of carbon monoxide (CO) providing an
early warning of toxic CO levels in your
home
• Detects carbon monoxide continuously
• Resistant to false alarms caused by normal
household contaminants
• Sounds a loud 85dB alarm (at 1m/3 feet)
to alert you in case of an emergency
• Test/reset button
• Regular self-check to ensure detector is
operating correctly
• Simple to mount, portable, ideal for
travelling
• Certified to the European Standard for
Carbon Monoxide Alarms
BS EN 50291 : 2001
• 7 year warranty
The FireAngel range of products is constantly
being improved and expanded. Please visit
www.fireangel.co.uk to find out about the
latest additions to our product range.
FireAngel manufactures some of the most
technologically advanced carbon monoxide
detectors in the world.
2
CARBON MONOXIDE
AND HOW IT CAN
AFFECT YOU AND
YOUR FAMILY
Carbon monoxide is a poisonous gas that
kills hundreds of people each year and injures
many more. It is often referred to as the silent
killer, it has no odour or taste and cannot
be seen. Like oxygen, CO enters the body
through the lungs during the normal breathing
process. It competes with oxygen by replacing
it in the red blood cells, thereby reducing the
flow of oxygen to the heart, brain and other
vital organs. In high concentrations, CO can
kill in minutes.
Many cases of reported carbon monoxide
poisoning indicate that while victims are
aware they are not feeling well, they
become disorientated and unable to save
themselves by either exiting the building or
calling for assistance. Exposure during sleep
is particularly dangerous because the victim
usually does not wake up.
Symptoms of CO poisoning
The following symptoms may be related to
CO poisoning which all household members
should be made aware of:
• Mild Exposure: Slight headache, nausea,
vomiting, fatigue (often described as ‘flulike’ symptoms)
• Medium Exposure: Severe throbbing
headache, drowsiness, confusion, fast
heart rate
• Extreme Exposure: Unconsciousness,
convulsions, cardiorespiratory failure,
death
Your FireAngel CO detector monitors the
level of CO as parts per million (ppm) in the
atmosphere surrounding the detector.
35ppm
The maximum allowable
concentration for continuous
exposure for healthy adults in any
8 hour period, as recommended
by the Occupational Safety and
Health Administration (OSHA).
200ppm Slight headache, fatigue,
dizziness, nausea after 2 - 3
hours.
400ppm Frontal headaches within 1 - 2
hours, life threatening after 3
hours.
800ppm Dizziness, nausea and
convulsions within 45 minutes.
Unconsciousness within 2 hours.
Death within 2 - 3 hours.
Should you suspect CO may be affecting you
or your family, open the doors and windows
of your property to ventilate, turn off your
appliances and evacuate the premises. At
this time the authorities should be contacted
3
to locate the source of the carbon monoxide
before re-entering the building. Medical
attention should be sought for anyone suffering
the effects of CO poisoning (headache,
nausea, see page 3).
Common sources of CO
• Oil and gas boilers
• Portable generators
• Oil or solid fuel cookers
• Gas or paraffin heaters
• Barbecues
• Clogged chimneys
• Gas, wood, coal or coke fireplaces
• Cigarette smoke
• Gas appliances
• Any fossil fuel burning appliance
WARNING: This FireAngel carbon
monoxide detector is not a combustible
gas detector, nor a smoke detector. Please
install the proper detectors to detect
combustible gases, or smoke.
This CO detector should not be seen as a
substitute for the proper installation, use,
and maintenance of fuel-burning appliances
(including appropriate ventilation and exhaust
systems), nor the sweeping of chimneys.
WARNING: Do not use this carbon
monoxide detector on an intermittent
basis, or as a portable detector for trying to
4
trace one source of the spillage of combustion
products from fuel-burning appliances or
from chimneys.
Do not:
•IGNORE ANY WARNING FROM YOUR
CO DETECTOR!
•Burn charcoal inside your home, caravan,
tent or cabin
•Install, convert or service fuel-burning
appliances without proper knowledge, skill
and expertise
•Use a gas cooker for heating a room
•Operate unvented gas burning appliances
using paraffin or natural gas in closed
rooms
•Operate petrol-powered engines indoors
or in confined areas
•Ignore a safety device when it shuts an
appliance off
Always:
•Buy appliances accepted by a recognised
testing laboratory
•Install appliances according to the
manufacturer’s instructions
•Have appliance installations carried out by
professionals (for gas appliances engineers
should be registered)
•Have your appliances checked regularly
by a qualified service engineer
•Have your chimneys and flues cleaned
professionally every year
•Make regular visual inspections of all fuelburning appliances
•Do not barbecue indoors, or in an
attached garage
•Open windows when a fireplace or oil/
solid fuel cooker is in use
•Only install CO detectors that meet the
requirements of BS EN 50291:2001 in
your home
•Be aware of CO poisoning symptoms (see
page 3)
EDUCATE YOURSELF AND YOUR FAMILY
ON THE SOURCES AND SYMPTOMS OF
CO POISONING AND HOW TO USE
YOUR CARBON MONOXIDE DETECTOR
WHERE TO INSTALL
YOUR DETECTOR
WARNING: This detector will only
indicate the presence of carbon monoxide
gas at the sensor. Carbon monoxide gas may
be present in other areas.
In which room should the detector be
installed?
Ideally, an apparatus should be installed
in every room containing a fuel burning
appliance. Additional apparatus may be
installed to ensure that adequate warning
is given for occupants in other rooms, by
locating apparatus in:
•Remote rooms in which the occupant(s)
spend considerable time whilst awake and
from which they may not be able hear an
alarm from apparatus in another part of the
premises, and
•Every sleeping room
However, if there is a fuel burning appliance
in more than one room and the number of
apparatus is limited, the following points
should be considered when deciding where
best to put the apparatus:
•Locate the apparatus in a room containing
a flueless or open-flued appliance, and
•Locate apparatus in a room where the
occupant(s) spend most time
•If the domestic premises is a bedsit (a
5
single room serving as both sitting and
bedroom) then the apparatus should be
put as far from the cooking appliances
as possible but near to where the person
sleeps
•If the appliance is in a room not normally
used (for example a boiler room), the
apparatus should be put just outside the
room so that the alarm may be heard more
easily.
Where in the room should I place the
detector?
Apparatus located in the same room as a
fuel-burning appliance:
aFor both wall and ceiling mounted
apparatus the following applies:
• The apparatus should be at a horizontal
distance of between 1m and 3m from
the potential source
• If there is a partition in a room, the
apparatus should be located on the
same side of the partition as the potential
source
• Carbon Monoxide detectors in rooms
with sloped ceilings should be located at
the high side of the room
bIn addition to the previous points the
following must be observed:
If the apparatus is located on a wall:
• it should be located close to the ceiling;
•it should be located at a height greater
6
than the height of any door or window;
• it should be at least 150mm from the
ceiling.
If the apparatus is located on the ceiling:
• it should be at least 300mm from any
wall and any ceiling obstruction e.g.
light fittings.
Apparatus located in sleeping rooms
and in rooms remote from a fuel burning
appliance:
• Apparatus located in sleeping rooms
or located in rooms remote from the
fuel-burning appliance should be located
relatively close to the breathing zone of
the occupants
Where not to put the detector
The apparatus should not be installed:
•In an enclosed space (for example in a
cupboard or behind a curtain)
•Where it can be obstructed (for example
by furniture)
•Directly above a sink
•Next to a door or window
•Next to an extractor fan
•Next to an air vent or other similar
ventilation openings
•In an area where the temperature may
drop below -10°C or exceed 40°C
•Where dirt and dust may block the sensor
•In a damp or humid location (for example
in a bathroom)
HOW TO INSTALL
YOUR DETECTOR
•Less than 1m/3 feet from any appliance
NOTE: This apparatus should be
installed by a competent person who
feels able to install it according to the
instructions.
Firstly write the installation date on your
detector in the area provided. We recommend
that your detector is installed on the wall.
To mount on a wall or ceiling:
Please ensure that you use the screws provided,
as they were chosen specifically for use with
this product. Use template below for guidance
on marking hole positions. Drill holes into the
wall. Insert the plastic wall plugs. Screw in
the screws. Ensure screws are protruding from
the wall by 3mm to allow detector to slot onto
screws.
To place on a shelf:
The base of the detector has been designed
to allow it to stand freely on a shelf.
WARNING: When placing on a shelf,
please follow to the recommendations for
positioning as described on pages 5 to 7.
Drill hole spacing
90mm
7
BATTERY
INSTALLATION /
REPLACEMENT
aIf the detector is already wall or ceiling
mounted then unhook it from the mounting
screws.
bRemove the battery cover located on the
back of the detector.
c Replace the batteries with 2 x approved
1.5 volt AA size alkaline batteries (see
page 16 for recommended batteries),
making sure the batteries are the correct
way round. Use of batteries other than
those recommended by FireAngel Ltd may
have a detrimental effect on the detector’s
operation. Replace the battery cover and
return the detector to its original position.
dYour advanced FireAngel detector requires
a short ‘warm-up’ period before it is fully
operational.
If you have followed all of the above steps
correctly, your unit will begin monitoring
for CO in around 3 minutes. When the
3 minute warm-up period is complete,
the Power LED will flash green once
per minute to indicate that the alarm is
receiving power from the batteries and is
fully operational (if your detector chirps or
enters alarm following the 3 minute
warm-up period then please refer to page
12).
8
eTest the sounder, batteries and circuitry by
pressing and holding the Test/Reset button
for 1 second. The sounder should sound
as soon as the button is pressed, and the
Alarm LED will illuminate red for a short
time indicating that the sounder is working
and the batteries are providing power to
the unit. This test for the sounder, batteries
and circuitry should be performed weekly.
Press ridged
area in and
slide door out
to reveal battery
compartment
WARNING: Prolonged exposure to the
sounder in close proximity to your ears
may damage your hearing.
Under normal operating conditions, the
batteries should last for at least 12 months.
The detector will not protect against the risk
of carbon monoxide poisoning when the
batteries have drained.
WARNING: Constant exposure to
extreme high or low temperatures may
reduce the life of the batteries.
OPERATING FEATURES
Your FireAngel detector offers many features
which set it apart from other CO detectors on
the market today.
Test/Reset button feature
This button will:
•Test the sounder, batteries and circuitry
•Allow you to test the sensor by introducing
a source of CO into the detector (see
‘Testing The Sensor’ below)
•Silence the loud 85dB sounder during an
alarm (only possible when current CO level
is less than 50ppm)
Testing the sounder, batteries and
circuitry
Test the sounder, batteries and circuitry by
pressing and holding the Test/Reset button
for 1 second to confirm that the detector is
operating properly. The sounder should sound
as soon as the button is pressed, and the
Alarm LED will illuminate red, indicating that
the sounder is working and the batteries are
providing power to the unit. This test for the
sounder, batteries and circuitry should be
performed weekly.
Testing the sensor
NOTE: We suggest the use of an
incense stick or cigarette as the inefficient
9
way in which these products­ burn means
the smoke given off contains a detectable
localised amount of carbon monoxide.
Alternative sources of smoke, for example
an extinguished candle or match, will not
contain sufficient levels of carbon monoxide
to obtain a response from the detector during
this test. Please note your CO detector will not
detect smoke.
If testing the sensor for the first time after
installation, or replacing the batteries, make
sure that the alarm has completed the initial
3 minute warm up period and the power LED
is flashing green once every minute.
CAUTION: Sensor testing should only
be performed by a responsible adult.
This test should only be performed once a
month. Excessive testing will cause the life
of the batteries to be shortened.
NOTE: CO test kits may be used in
order to avoid having to burn incense
sticks or cigarettes. However we recommend
that incense sticks are used as they are cheap
and readily available.
Step 2
Test/Reset
Button
Step 3
• Read all steps thoroughly before attempting
to test your the sensor
Step 1
10
If the detector is wall or ceiling
mounted unhook the detector from
the screws.
Cover the sounder vents with one
hand. Press and hold the Test/
Reset button down with your
thumb/finger until the Power LED
illuminates green and the sounder
sounds for a second time (this
should happen after around 5
seconds). Release the Test/Reset
button. Upon releasing the Test/
Reset button the Power LED will
flash green once every second.
This indicates that the sampling
rate of the detector has increased
and can be tested using a known
source of CO.
Step 4
Light an incense stick or cigarette
using a match or lighter. If using
an incense stick be sure to blow
out the flame so that the incense
stick is smouldering. Extinguish
the lighter, or put out the match
and place it into a dish of water.
Turn the detector on its side
Step 5
so that the vents on the right
hand side of the detector are
pointing downwards (see
diagram opposite). Hold the
burning incense stick or cigarette
around 15cm (6 inches) below
the detector, so that the smoke
enters the vents on the side of
the detector. An increase in the
localised carbon monoxide level
within the sensor to more than
50ppm will cause the sounder
to sound for one cycle of four
loud beeps and the Power LED
to illuminate green for a short
time. This is the end of the test.
The Power LED will no longer
flash green every second but
will revert to flashing once every
minute as the detector will go
back to normal operating mode
(It may take up to two minutes
of exposure to the smoke for
the localised level of carbon
monoxide within the sensor to
reach over 50ppm). Now move
the source of CO away from the
detector as the test is finished.
After step 4, put out the incense
stick or cigarette by placing it into
a dish of water. Ensure that all
flames have been extinguished.
NOTE: If the localised carbon monoxide
level within the sensor does not reach
50ppm during the test, the sensor test will
stop automatically after 3 minutes.
15cm
(6”)
11
UNDERSTANDING
THE PRODUCT’S
INDICATORS
The higher the concentration of carbon
monoxide detected by the detector, the
quicker it will respond. When sufficient
carbon monoxide is detected a loud audible
signal (85 dB at 1m/3 feet) will be emitted
and the Alarm LED will flash red once every
second.
The Alarm will sound:
•Between 60 and 90 minutes when
exposed to 50ppm of CO
•Between 10 and 40 minutes when
exposed to 100ppm of CO
•Within 3 minutes when exposed to
300ppm or more
Fault / low battery signal:
The unit continuously checks the settings of its
sensor and circuitry. If any of these settings
are found to be incorrect or if the batteries
become low then the detector will emit a
single audible chirp once per minute for up
to 30 days. IMPORTANT: This does NOT
mean that the detector has detected carbon
monoxide.
Replace batteries immediately. If the product
continues to chirp despite having new batteries
and the product is still within warranty then
12
contact technical support for advice. If the
product is no longer in warranty replace it
immediately!
FireAngel Technical Support Line
9.00am–5.00pm, Monday–Friday.
Telephone: 0800 141 2561
UK Textphone Users Telephone: 18001 0800
1414 2561
EIRE dial: 1-800 523171
e-mail: [email protected]
MAINTAINING /
TESTING YOUR
DETECTOR
Maintenance
Your detector will alert you to potentially
hazardous CO concentrations in your home
when maintained properly. To maintain your
FireAngel detector in proper working order,
and to ensure that the sensor will last for the
lifetime of the product, it is recommended that
you:
•Test the sounder, batteries and circuitry of
your detector once per week by pressing
and holding the Test/Reset button for 1
second (see page 9)
• Perform the Sensor Test once every month
(see page 9)
• Keep the detector free of dust by gently
vacuuming the case with a soft brush
attachment once per month
• Move the detector to a safe location and
store in a plastic bag before painting, wall
papering, or performing any other activities
using substances that emit strong fumes.
Remember to remove it from the bag and
return the detector to its original location
when these activities are finished
Failure of any test should be reported to
the technical support line (see page 19 for
contact details).
Do not attempt to repair your CO detector.
Do not remove any screws or open the main
casing of your detector. Any attempt to do so
may cause malfunction and will invalidate the
warranty.
To prevent the possibility of contaminating the
sensor in your detector and thus affecting its
reliability:
• Never use cleaning solutions on your
detector. Simply wipe with a slightly damp
cloth
• Do not paint the detector
• Do not spray aerosols on or near the
detector
• Do not use any solvent based products
near the detector
13
WHAT TO DO IN THE
EVENT OF AN ALARM
WARNING: A loud alarm is a warning
that unusually high and potentially lethal
levels of carbon monoxide are present.
Never ignore this alarm, further exposure
can be fatal. Immediately check residents for
symptoms of carbon monoxide poisoning,
and contact the proper authorities to resolve
all CO problems. NEVER IGNORE ANY
ALARM.
Please carefully review this owner’s manual to
ensure that you know what actions to take in
the event of an alarm.
What to do during an alarm
•Keep calm and open the doors and
windows to ventilate the property
•Stop using all fuel burning appliances and
ensure, if possible, that they are turned off
•Evacuate the property leaving the doors
and windows open
•Ring your gas or other fuel supplier on their
emergency number; keep the number in a
prominent place
Write your fuel supplier’s emergency number
here (see opposite for more useful numbers):
____________________________________
14
•Do not re-enter the property until the alarm
has stopped. When exposed to fresh air it
can take up to 10 minutes for the sensor to
clear and the alarm to stop depending on
the level of carbon monoxide detected
•Get medical help immediately for anyone
suffering the effects of carbon monoxide
poisoning (headache, nausea), and
advise that carbon monoxide poisoning is
suspected
•Do not use the appliances again until they
have been checked by an expert. In the
case of gas appliances the engineer must
be registered
USEFUL NUMBERS
National Gas Emergency Service
Gas Safe register
0800 111 999 (24 Hours)
0800 408 5500
Solid Fuel Association
Advisory service for domestic and solid fuel
appliances
0845 601 4406
HETAS
Trade association for solid fuel engineers
0845 223 3033
OFTEC
Trade association for Oil Fired Appliance
engineers
0845 658 5080
NACS
National Association of Chimney Sweeps
0800 833 464
IPHE
Institute of Plumbing and Heating Engineers
0870 414 5533
15
TECHNICAL INFORMATION
Detector Specifications:
Sensor Type:
Sensor Life:
Alarm Sound Level:
Recommended Batteries:
Battery Life:
Temperature Range:
Operating Humidity Range:
Weight (inc. batteries):
Certified to:
Model CO-9B
Electrochemical
7 Years
85dB at 1m/3 feet
Size AA Alkaline - Duracell LR6, Energizer LR6, Gold Peak 15A
Exceeds 1 year under normal operating conditions, replaceable
-10ºC (14ºF) to 40ºC (104ºF)
30 - 90% RH
125 grams (4.4oz)
BS EN 50291 : 2001
This FireAngel carbon monoxide detector is designed to continuously monitor for CO. Its response
times meet the requirements of the European standard BS EN 50291:2001.
The alarm will sound:
•Between 60 and 90 minutes when exposed to 50ppm of CO
•Between 10 and 40 minutes when exposed to 100ppm of CO
•Within 3 minutes when exposed to CO levels of 300ppm or more
16
WARNING:
APPARATUS
CONFORMING TO THIS STANDARD
MAY NOT PROTECT PEOPLE WHO ARE AT
SPECIAL RISK FROM CARBON MONOXIDE
EXPOSURE BY REASON OF AGE,
PREGNANCY OR MEDICAL CONDITION. IF
IN DOUBT, CONSULT YOUR DOCTOR.
A CARBON MONOXIDE DETECTOR IS NOT
A SUBSTITUTE FOR A SMOKE ALARM OR A
COMBUSTIBLE GAS DETECTOR.
THE CO-9B HAS AN OPERATIONAL
LIFETIME OF 7 YEARS FROM THE DATE IT IS
INSTALLED AND ACTIVATED. RECORD THE
DATE OF INSTALLATION ON THE STICKER
PROVIDED AND REPLACE UNIT AFTER 7
YEARS OF OPERATION.
DISPOSAL
Waste electrical products should not be
disposed of with regular household waste.
Please recycle where facilities exist. Check
with your local authority, retailer or the
FireAngel Technical Support Line (see page
19 for contact details) for recycling/disposal
advice as regional variations apply.
The batteries should be removed before
disposal of the detector. Both the batteries and
the detector should be disposed of in line with
current regulations.
You can also return your carbon monoxide
detector to us for disposal. For return address
see the section on Returns. Please include a
note confirming the product is being returned
for disposal.
WARNING: DO NOT ATTEMPT TO
OPEN - DO NOT BURN
17
7 YEAR WARRANTY
Warranty coverage
FireAngel Ltd warrants to the original purchaser
that its enclosed sealed carbon monoxide
detector be free from defects in materials and
workmanship under normal residential use
and service for a period of 7 (seven) years
from the date of purchase.
Provided it is returned with postage prepaid
and proof of purchase, FireAngel Ltd hereby
warrants that during the 7 (seven) year period
commencing from the date of purchase
FireAngel Ltd, at its discretion, agrees to
replace the unit free of charge. The warranty
on any replacement FireAngel CO-9B Carbon
Monoxide Poisonous Gas Alarm will last for
the remainder of the period of the original
warranty in respect of the detector originally
purchased – that is from the date of original
purchase and not from the date of receipt of
the replacement product. FireAngel Ltd reserves
the right to offer an alternative product similar
to that being replaced if the original model is
no longer available or in stock. This warranty
applies to the original retail purchaser from
the date of original retail purchase and is not
transferable. Proof of purchase is required.
Warranty disclaimers
This warranty does not cover damage
resulting from accident, misuse, disassembly,
abuse or lack of reasonable care of the
18
product, or applications not in accordance
with the user manual. It does not cover events
and conditions outside of FireAngel Ltd’s
control, such as Acts of God (fire, severe
weather etc). It does not apply to retail stores,
service centres or any distributors or agents.
FireAngel Ltd will not recognise any changes
to this warranty by third parties. FireAngel
Ltd shall not be liable for any incidental or
consequential damages caused by the
breach of any expressed or implied warranty.
Except to the extent prohibited by applicable
law, any implied warranty of merchantability
or fitness for a particular purpose is limited in
duration to 7 years.
This warranty does not affect your statutory
rights. Except for death or personal injury,
FireAngel Ltd shall not be liable for any loss of
use, damage, cost or expense relating to this
product or for any indirect, or consequential
loss, damages or costs incurred by you or any
other user of this product.
The warranty does not cover the batteries
which are considered user-replaceable parts.
RETURNS
PRODUCT RANGE
Should you encounter a problem with your
alarm, we recommend that you contact the
FireAngel Technical Support Line in the first
instance for advice on 0800 141 2561
(9.00am–5.00pm, Monday–Friday), UK Text
phone users dial 18001 0800 141 2561 or
callers from EIRE dial 1-800 523171 as we
may be able to remedy the problem quickly
over the phone (this is to prevent unnecessary
returns that take a longer time to process).
Alternatively e-mail:
[email protected]
FireAngel Ltd manufactures an extensive range
of home safety products including smoke
alarms, carbon monoxide detectors, fire
extinguishers and remote sounding devices.
For more details visit www.fireangel.co.uk.
If there is a fault that we are unable to resolve
then our technical support team member will
issue you with a returns authority number so
that your product can be returned for testing.
To return your FireAngel CO-9B under
warranty, send it suitably packed and with the
battery disconnected with postage prepaid;
a note indicating the returns authority number
and describing the reason for return, with
proof of purchase to:
FireAngel Limited
The TechnoCentre
Puma Way
Coventry, CV1 2TT
UK
19
NOTES
Ref: GN0324/R2
20
Technical Support Line
0800 141 2561
UK Textphone users dial 18001 0800 141 2561
EIRE dial 1-800 523171
Email
[email protected]
Web
www.fireangel.co.uk
BS EN 50291:2001
KM 551504
FireAngel Ltd.
The Technocentre, Puma Way
Coventry CV1 2TT UK
A division of
CO-9B
GN0324/R2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement