Thank you for your purchase !
WOODEN PLATFORM
BED FRAME
ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or componenets may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
lnjury may result from tipping furniture. You must installthe Tipping Restraint Hardware with the unit to prevent the unit from tipping and causing any accidental in.1ury, instability, death or damage. The tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
This tipping restraint is not an earthquake restraint. lf you wish to add the extra security of earthquake restraints, they must be purchased and installed separately.
Serious or fatal crushing injuries can occur frorn furniture tipping over. To prevent furniture from tipping over it must be permanently fixed to the wall. Fixing devices for the wall are not included since different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home
Failure to detach this restraint before moving furniture may result in injury or damage.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
..................................................................................
Customer Service Email: [email protected]
I Phone: 866-552-2810
YKC-1090-F-WAL-GG / YKC-1090-F-NAT-GG
Have a Question/Concern?
Quality products and first-class customer service are the cornerstone of longlasting consumer relationships. We strive toward excellence in all we do and want you to be completely satisfied with your purchase.
Please contact our exceptional Customer Experience Agents at the email address or phone number shown below to assist you with any product questions or issues before requesting a return.
We look forward to serving you in a friendly, efficient manner to resolve any issues you may have.
Customer Service Phone: 866-552-2810
Our Warrant
y
Statement
This warranty covers manufacturing defects associated with your new product. The product is warranted from the original purchase date and to the original purchaser for normal usage, according to the below-referenced specifications and limitations.
Non-moving metal parts are warranted for 5 years,
Component parts including pneumatic cylinder, control mechanism, base and casters are warranted for 2 years.
All other items are warranted for 1 year.
Normal usage means use in compliance with the restrictions and welght limits specified for the product. ln the absence of product-specific restrictions and weight limits, normal usage means use for no more than forty hours per week by persons weighing 250 lbs. or less. Coverage terminates if the product is sold or otherwise transferred. Repairs made by parties otherthan
Belnick also void this warranty.
This warranty will not cover: (1) labor, freight, or damage from misuse, abuse, negligence, alteration, assembly, installation, attachments, accident, vandalism, acts of nature or any other event beyond the control of Belnick; (2)tearing, scratching, scuffing, or blemishing of leather or fabric; (3) cosmetic damage that may result from normal usage; {4) damage attributable to use by persons exceeding specified weight limits or commercial use exceeding forty hours per week; or (5) rust or other damage caused by exposure to moisture. The user assumes all risk of injury resulting from use of this product. Liability for incidental or consequential damage is excluded. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Part s
Part 1: Le � & Right Siderails Part 2: Headboard & Footboard Part 3: Le � Headboard &
Right Footboard Legs
Part 4: Right Headboard
& Le � Footboard Legs
2 pcs 2pcs
Part 5: Le � & Right Side Legs Part 6: Center Legs Part 7: Center Rail
2pcs
Part 8: Support Slats
2pcs
2pcs
Hardware
3pcs 1pc 1pc
Headboard
M8 – 85mm Screw
Part A
x 16pcs
M6 – 50mm Screw
Part B
x 3pcs
M6 – 30mm Screw
Part C
x 4pcs
M8 – 1mm Large Lock
Washer
Part D
x 16pcs
M8 – 1mm Large Flat
Washer
Left Headboard Leg
Part E
x 16pcs
Left Side Leg
M5 Allen Wrench
Part H
x 1pcs
M4 Allen Wrench 30mm Self-Tapping
Screw
Part I
x 1pcs
Part J
x 2pcs
M6 – 1mm Small Lock Washer M6 – 1mm Small Flat Washer
Part F
x 4pcs
Part G
x 4pcs
STEP 1A: Attach Left Headboard & Right Footboard Legs (Part
3) and Right Headboard & Left Footboard Legs (Part 4) to the
Headboard and Footboard (Part 2) and the Left and Right
Siderails (Part 1) using (16) M8 – 85mm Screws (Part A) , (16)
Large Lock Washers (Part D) and (16) Large Flat Washers (Part
E).
Tighten with M5 Allen Wrench (Part H)
M6 – 30mm Screw
M8 – 85mm Screw
M6 – 1mm Small
Flat Washer
Headboard
STEP 1A:
Large Flat
Attach Left Headboard & Right Footboard Legs (Part
3) and Right Headboard & Left Footboard Legs (Part 4) to the
Headboard and Footboard (Part 2) and the Left and Right
Siderails (Part 1) using (16) M8 – 85mm Screws, (16) Large Lock
Washers (Part D) and (16) Large Flat Washers (Part E).
Tighten with M5 Allen Wrench (Part H)
Right Side Leg
M4 Allen Wrench
M4 Allen Wrench
Headboard
2
Left Headboard Leg
Left Side Leg
4
Right Headboard leg
Footboard
1
Right siderail
Right Footboard Leg
Left Footboard Leg
5
Right side leg
Right Headboard Leg
3
Left Headboard leg
Right Side Leg
1
Left siderail
Left side leg
5
Footboard
4
Left footboard leg
Left Footboard Leg
M6 – 30mm Screw STEP 1B: Attach Left Side Leg & Right Side Leg (Part 5) to the
Left and Right Siderails (Part 1) using (4) M6 – 30mm
M6 – 1mm Small Lock Washers (Part F) and (4) M6
Flat Washers (Part G). Tighten with M4 Allen Wrench (Part I).
M4 Allen Wrench
M6 – 1mm Small
Lock Washer
Right Footboard Leg
2
Footboard
3
Left footboard leg
STEP 1B: Attach Left Side Leg & Right Side Leg (Part 5) to the Left and Right
Siderails (Part 1) using (4) M6 – 30mm Screws (Part C) , (4) M6 – 1mm Small
Lock Washers (Part F) and (4) M6 – 1mm Small Flat Washers (Part G). Tighten with M4 Allen Wrench (Part I).
M6 – 1mmSmall
Flat Washer
M6 – 1mm Small
Lock Washer
STEP 2: A ttach the Center Rail (Part 7) to the Headboard & Footboard ( Part 2 )
using (2) 30mm Self-Tapping Screws .( Part J)
Attach the Center Rail (Part 7) to the Headboard &
.
30mm Self-Tapping
Screws
Attach Left Side Leg & Right Side Leg (Part 5) to the
Screws, (4)
1mm Small
Flat Washers (Part G). Tighten with M4 Allen Wrench (Part I).
Center Rail
7
STEP 3: Place rolled support slats (Part 8) onto the Center Rail and Siderails.
Left Siderail
Center Rail
Support Slats
Right Siderail
STEP 4: Place the Center Legs (Part 6) under the
Center Rail and unroll Support Slats until the screw hole is visible. Attach the Support Slats to the
Center Rail and Center Legs using (3)
Screws (Part B). T igh ten with M4 first
M6 – 50mm
Allen Wrench (Part I).
Small Flat Washers (Part G). Tighten with M4 Allen
Wrench (Part I).
M6 – 50mm Screw
M6 - 50mm Screw
NOTE: Do not fully unroll support attached, slowly unroll slats until the next screw hole is visible. Attach to center rail and leg one at a time until all 3 are attached.
slats to begin. Once the first leg is attached, slowly unroll slats until the next screw hole is visible. Attach to center rail and leg one at a time until all 3 are attached.
Center Legs
Center Legs
6
6
Center Legs
6
