THE dust CATCHER DC010 6.25 in. Drill Dust Pan Collector Instructions

1. Grip The Dust Catcher and press the rubber edge to the surface, tilt forward so plastic
edges meet the surface creating a seal. Place drill bit on the drill guide and begin drilling
See Image A.
TIPS
e Always make sure rubber seal is properly seated against the surface being drilled to
optimize tool.
When using smaller drill bits lower The Dust Catcher to make room for the drill.
Use drill guide to help with accuracy when drilling tile, concrete and metal.
After use, do not turn sideways or upside down.
To Clean, dump drill dust in trash and rinse with water.
thedustcatcher.com
">