ASSEMBLY INSTRUCTION
oO =
= © )
Y
== 4 2 22
0 ©
= 2 © \
®
9 ое \
CO o ©
o = Y Y A
L = Y À rr
= co MWA a
5 95 AIR oO
IVY LV /7 AO a a D
N >” (0
© + 4 Y A J e
| 93 A 3
= X km Y A er a = > U
o OO >) N/A y 7
® со
o © V
a ©
LL © ©
> 07
= USE (4 \
о Е?
oO “$
2 20 —
©.
01/27
I! SAFETY WARNINGS !
This bed is designed for use only mattress (es) meeting the following specifications on the upper bunk, and
lower bunk
Upper bed
Bed Type Length Width Thickness
Twin Standard 14” - 75” 38 7?” 6" max
Lower bed
Bed Type Length Width Thickness
Twin Standard 74” - 75” 38 1/2 8" тах
Replacement parts, including additional guardrails, maybe obtained from any of our (GIGACLOUD
TECHNOLOGY (USA) INC. 18961 ARENTH AVENUE CITY OF INDUSTRY, CA, 91748) dealers
Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton.
Do not remove warning label from bed
Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood
of entrapment or falls.
Surface of mattress must be at least 5" (127mm) below the upper edge of guardrails
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other components are in their proper position,
free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Always use the ladder for entering and leaving the upper bunkAlways use the ladder for entering and
leaving the upper bunk.
Do not use substitute part. Contact the manufacture or dealer for replacement part
Use of a night light may provide added safety precaution for a child using the upper bunk..
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the
wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and wall.
The use of water or sleep flotation mattresses 15 prohibited
STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to, hook, belts and jump ropes
Keep these instruction for future reference
Prohibit more than one person on upper bunk
We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet
Be certain all staples are out of the box before beginning assembly on the shipping carton.
02/27
ASSEMBLY INSTRUCTION
És
Wood Bars-3pcs
Wood Bars-6pcs _
Part List & Hardware List(Box 1-wF288730)
A1 A2 A3
Legs-2pcs Leg-1 pc Lege1pc
A4 | AS | B1
Leg-1pc Y Leg*1pc Wood Bars-3pcs
IB2 B3 C1
Side Rails-1pc
Side Rails-1pc
C3
Side Rails-1pc
C4
Side Rails-1pc
Guardrails(Back)- 2pcs
C6
A
Guardrails(Front)- 2pcs
C7
Guardrails(Front)- 2pcs
(C8 | D1 D2
NS
Rails-4pcs Side Rails-1pc Side Rails-1pc
ID3 D4 05
Side Rails-1pc Side Rails-1pc Guardrails(Back)- 2pcs
04/27
Part List (Box 2-wF288731)
D6 E F1 S
Guardrails(Front)- 2pcs Slats-42pcs Leg-1pc
F2 F3 [ F4
Leg-1pc Leg-1pc Leg-1pc
F5 F6 | F7 i
e 0 LL
Leg-1pc Leg=1pc Leg-1pc
| \ | - a
Leg-1pc Wood Bar-1pc Wood Bar-1pc
| SN | o | N
Wood Bar-1pc Wood Bar-1pc Wood Bar-1pc
В NS | NS | Бо
Wood Bar-1pc Wood Bars-2pcs Wood Bar-1pc
IH2 H3 H4
Wood Bar-1pc Wood Bar-1pc Wood Bar-1pc
05/27
Part List (Box 3-wF288732)
| | | > | >
Wood Bars-4pcs Panels-2pcs Panels-2pcs
Panels-4pcs LT Panels-2pcs Wood Bars-2pcs
В Г р > o a
Wood Bar-1pc Panel-1pc Panel-1pc
P3 a P4 | P5
Panels-2pcs Panel-1pc Panels-2pcs
P6 | P7 | РЗ
Panel-1pc Panel-1pc Panel-1pc
РУ] a Ш T2
Panel-1pc Vertical Bar-1pc Vertical Bar-1pc
T3 1 14 a TS
Panel-1pc Panel-1pc LT Horizontal Bar-1pc
06/27
Part List (Box 3-wF288732)
T6
Vertical Bar-1pc
07/27
Hardware List(Box 1-wF288730)
1 2 3
(O) — SD A
Screws 1/4" x80 G10 x 40 mm 01/4" x 80 mm
40pcs Wood dowel 40pcs Hex-Head bolts 24pcs
4 D 6
exe
y = T
O1/4"x 13 mm Screws 1/4" x30 0114" x 25 mm
Horizontal-Hole bolts 27pcs 9pcs Hex-Head bolts 2pcs
| | A
O1/4" x 15 mm 01/4" x 70 mm O1/4" x 40 mm
Canopy head though -8pcs Hex-Head bolts 3pcs Hex-Head bolts 7pcs
10 Ze 11 12
M4 x 30 mm 012 х 70mm
Allen Key 1pc Wood Screws 92pcs Wood dowel 4pcs
13 14 15
Ny
MX
(0) mm y <Y
Screws 1/4" x60 M3 x 12 mm Door Catches 45x17x13
6pcs Wood Screws 18pcs Gpcs
16 17 18
Screw M4x15 01/4" x 30 mm O8 x 30 mm
12pcs Hex-Head bolts 24pcs Wood dowel 4pcs
19 20 21
csr”
M4 x 15 mm Pan head Screw M4x15 01/4" x 50 mm
Wood Screws 15pcs Spcs Hex-Head bolts 8pcs
C
Assembly Tools Required (Not Included)
08/27
STEP 1 = Following below illustration:
-Using hardware #1 connect B1,B2,B39(x2) Woodbar with A1,A3 Legs
N
>
/
/
Z
/e0e
\
(
=
X=
6pcs
PON
)
NODO Y,
(
Je
Ca
09/27
STE P 2 . Following below illustration: 1
-Using hardware #1 connect B1,B2,B39(x2) Woodbar with A1,A2 Legs 0
6pcs
N
>
\
/
(
\
>),
\ =>» /
10/27
ST E P 3 = Following below illustration:
-Using hardware #1 connect B1,B2,B39(x2) Woodbar with A4,A5 Legs
N
>
y
Y
y 1
ГАА
X=
(>)
Looe
Хх ®
’
/
6pcs
11/27
\
Y
ae,
—
\
\
\
un
—
oe,
a,
-
—
-—. — mn mn
STE P 3 = 1 Following below illustration:
-Using hardware #5 connect Side Rail D4 and Guardrails D5(x2) with Wood Bar C8
м
SS 5 e 3568
umi
STE P 3 -2 Following below illustration:
-Using hardware #5 connect Side Rail C4 and Guardrails C5(x2) with Wood Bar C8
3pcs
8
ST E P 3-3 . Following below illustration:
-Using hardware #5,#6,#7 connect Side Rail D3 and Guardrails D6(x2) with Wood Bar C8(x2)
12/27
4x DETAI 2
ook at detail view for more detail
4x DETAI 1
DS
oe,
ae se, me
em
LL
ST E P 5 „ Following below illustration
-Using hardward #3,#4 and dowel #2 to Assembly Frame (Completed on step 1)
nd Frame(Completed on step 2) with siderail C3(x2) and Guardrails C6(x2),C7(x2)
ISS
6pcs
N O)
6pcs
6
о a)
CD
e
„==“
-
pe
-
ра
..
-
—
rn a FE
..
/ 7
A 9 Х
AN /
\
LA
Dom.
-
``
„ Following below illustration
with siderail D1,D2 and Frame (Completed on step 3-1,3-3)
-Using hardward #4 #7 #8 #9 and dowel #2 to Assembly Frame (Completed on step 5) _-
Г
+
D
TD
D
O
Е
L
2
=
©
>
©
=
O
Le)
+,
in)
>
je]
O
—
STEP 6
14/27
ISS
N
49)
O
©.
YN 4 Y
O ‘
©. DR
„ Following below illustration
SIEP6
-Using hardward #4,#7,#8,#9 and dowel #2 to Assembly Frame (Completed on step 5)
with siderail D1,D2 and Frame (Completed on step 3-1,3-3)
L
LES
CS
LS
CS
~~
CS
La
CS
CS
LS
CS
6pcs
>
15/27
ра
S
———
—— oe
-
-
..”
”
ook at detail view for more detail
es
ip
ip
=. -
om. en
=
ST E P [ Following below illustration 1
-Using hardward #1 to Assembly G1,G2,G3 Woodbar with Legs F1.F4
-Using hardward #1 to Assembly H1 Woodbar with Legs F5.F8
.Look at detail view for more detail
(LEFT )
Clay
(RIGHT)
16/27
ST E P 8 „ Following below illustration
-Using hardward #1 to Assembly K,G4,G5,G6,G7 Woodbar and L2,L3(x2) panels with Legs F2.F3
-Using hardward #1 to Assembly K,H2,H3,H4,G7 Woodbar and L2,L3(x2) panels with Legs F6.F7
Look at detail view for more detail
e. 17/27
a
a
INDY
N
—
ST E P 9 = Following below illustration
-Usin |
STE P 1 0 Following below illustration
-Using hardward #13 to Assembly Frames(completed on step 9) >
with N1(x2),N2 wood bar
.Look at detail view for more detail
nn,
ST E P 1 1 = Following below illustration
-Using hardward #16 to Assembly Door Catches with P4(x1),P5(x2) panels
-Using hardward #14 to Assembly Hinge with P6(x1),P5(x2) panels
.Look at detail view for more detail
1 (4
Z 6(pcs) |18(pcs)
STE P 1 2 = Following below illustration 1 Г 1 O
Using hardward #17 amd dowel #18 to Assembly Frames(completed on step 10) with P1 panel,
26 frame(completed on step 11).Look at detail view for more detail
N
4pcs
20/27
STE P 1 3 Following below illustration
-Using hardward #17 to Assembly Frames(completed on step 12) with P5 panel,P3 Frames(completed on step 11)
Look at detail view for more detail
17
12pcs
21/27
STE P 1 4 Following below illustration
-Using hardward #19 to Assembly Frames(completed on step 13) with P7,P8,P9 panels
-Look at detail view for more detail
14 pcs
STE P 1 5 Following below illustration 20
"Using hardward #20 to Assembly Frames(completed on step 14) with M(x2) panels 8 fn
-Look at detail view for more detail
8 pcs
7
=
EZ
23/27
24/27
1
NE
ST E P 1 6 Following below illustration
-Using hardward #7,#9,#17 to Assembly Frames(completed on step 6) with
Frames(completed on step 15)
-Look at detail view for more detail
STEP 17-1:
STEP 17-2:
SS, |?
al DA
u ij
wie’
21
Spcs 4pcs
25/27
ST E P 1 8 „ Following below illustration
-Using hardward #17 to Assembly Frames(completed on step 16) with
26/27
2 .. oof,
11
N NN VZ NZ _N
7
YY >
ST E P 1 9 „ Following below illustration:
-Screw 42 slats E with Side Rail C1,C2,C3,C4,D1,D2,D3,D4 by usi
27/27
">
