CPCI to CPCI Serial Hybrid Rack for Single Eurocards

CPCI to CPCI Serial Hybrid Rack for Single Eurocards
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/0701-0056.html
CPCI to CPCI Serial Hybrid Rack for Single
Eurocards
n 19" rack-mountable
n IEEE 1101.10/11 compliance
n 4U / 84 HP system (incl. 1U fan tray)
n 8-slot hybrid backplane
n CompactPCI® PlusIO system slot
n 4 CompactPCI® Serial (PICMG CPCI-S.0)
peripheral slots to the right
n 3 CompactPCI® peripheral slots to the left
n All slots prepared for rear I/O
n 250 W Plug-in PSU 90..264 VAC
n 44HP space for individual extensions
n For MEN SBCs F11S, F12N, F14, F15, F17,
F18, F19P, F21P, F22P, F50P, F75P
This compact 4U rack-mount enclosure is a basic
system that allows the configuration with both
CompactPCI® Serial and CompactPCI® cards. Being a
hybrid system, it offers an uncomplicated and costeffective migration solution from parallel 3U
CompactPCI® to serial CompactPCI® Serial via the
CompactPCI® PlusIO standard.
The 8-slot hybrid backplane in this configuration does
not need a bridge or an active logic. The four slots on
the left are designed for 32-bit CompactPCI® and rear
I/O on P2. The four slots on the right are reserved for
CompactPCI® Serial. The CompactPCI® PlusIO system
slot is the fourth slot from the left. Either a standard
CompactPCI® 2.0 or a PICMG 2.30 CompactPCI®
PlusIO CPU board can be used in this slot.
This hybrid system is designed for use with the MEN
system-slot SBCs F11S, F12N, F14, F15, F17, F18, F19P,
F21P, F22P and F50P. Only F19P, F21P, F22P and F50P
0701-0056 Data Sheet / 2013-05-14
support CompactPCI® Serial.
That way, the three remaining slots on the CompactPCI® bus and the
four CompactPCI® Serial slots can be used to install additonal I/O
functions.
While the CompactPCI® Serial slots on the right are best suited for
functions like Gigabit Ethernet, 10 Gigabit Ethernet or high end graphic
with high data rate requirements, the parallel CompactPCI® bus delivers
enough performance for all kinds of conventional I/O like binary or
analog signals.
In addition, the system offers space for mass storage devices.
A 8HP plug-in 250W power supply unit which is accessible at the back
of the system is already included and wired.
The enclosure meets EMC requirements, making it a perfect choice for
embedded applications in harsh environments.
Ask us for completely configured, wired and tested systems!
Page 1
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/0701-0056.html
Diagram
0701-0056 Data Sheet / 2013-05-14
Page 2
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/0701-0056.html
Technical Data
General System Characteristics
n
n
Mechanical Specifications
n
n
n
n
CompactPCI®/CompactPCI® Serial
Backplane
n
n
n
n
Power Supply
n
n
Compliance with IEC 60 297-3, IEEE 1101.10
8 slots for 3U Eurocard boards (4 CompactPCI® Serial slots)
19" rack-mount standard
3U card vertical
Dimensions: 3U, 84HP, 278mm depth
Weight: tbd.
8-slot
CompactPCI® PlusIO system slot on the fourth slot from the left
®
o Support of four CompactPCI Serial peripheral slots
Three CompactPCI® peripheral slots
Four CompactPCI® Serial peripheral slots
Plug-in power supply
o 3U/8HP
o 250W
o 90V..264V AC wide range
o 3.3 V/40A, 5 V/40A, 12V/5.5A, -12 V/2A
o 3U power backplane with P47 receptacle
o 3U power input module with IEC input, fuse holder, line filter and power switch
Power connector and power-on switch at the back
1U fan chassis
n
Two vertical fans
o 12V
o Air flow volume 140 m³/h (manufacturer's data)
o Dimensions 119 x 119 x 32 mm
o Sound pressure level 39 dB(A)
Environmental Specifications
n
n
Temperature range (operation):
o 0..+50°C
Temperature range (storage):
o -40..+85°C
o Power supply: -20..+65°C without derating
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
EMC
n
Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Suited for MEN Boards...
n
F11S - 3U CompactPCI® Intel® Atom™ SBC
F12N - CompactPCI® MPC5200B SBC
F14 - CompactPCI® Pentium® M SBC
F15 - CompactPCI® Core Duo SBC
F17 - CompactPCI® Core 2 Duo SBC
F18 - CompactPCI® Core 2 Duo SBC
F19P - CompactPCI® PlusIO Core 2 Duo SBC
F21P - CompactPCI® PlusIO Intel® Core™ i7 SBC
F22P - CompactPCI® PlusIO Intel® Core™ i7 SBC
F50P - CompactPCI® PlusIO MPC8548 SBC
F75P - CompactPCI® PlusIO Intel® Atom™ Safe Railway Computer
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
0701-0056 Data Sheet / 2013-05-14
Page 3
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/0701-0056.html
Ordering Information
Standard CPCI to CPCI Serial
Hybrid Rack for Single Eurocards
Models
0701-0056
CompactPCI® 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 4+4-slot 3U
CompactPCI® / CompactPCI® Serial hybrid backplane, prepared for rear I/O, 250W
power supply wide range 90..264VAC on rear, 1U fan tray with 2 fans included, 0..+60°C
MEN delivers turn-key systems completely installed (hardware, operating system, accessories), wired and
tested. Different rack sizes, power supplies and backplanes on request.
For details please contact your local sales representative.
Miscellaneous Accessories
0714-0009
Filler panel 3U/4HP, IEEE1101, textile gasket
0714-0018
Filler panel 3U/8HP, EMC gasket, fully pre-mounted
0714-0019
Filler panel 3U/12HP, EMC gasket, fully pre-mounted
Contact Information
Germany
France
USA
MEN Mikro Elektronik GmbH
Neuwieder Straße 3-7
90411 Nuremberg
Phone +49-911-99 33 5-0
Fax +49-911-99 33 5-901
MEN Mikro Elektronik SAS
18, rue René Cassin
ZA de la Châtelaine
74240 Gaillard
Phone +33 (0) 450-955-312
Fax +33 (0) 450-955-211
MEN Micro Inc.
860 Penllyn Blue Bell Pike
Blue Bell, PA 19422
Phone (215) 542-9575
Fax (215) 542-9577
[email protected]
www.men.de
[email protected]
www.men-france.fr
[email protected]
www.menmicro.com
The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are
trademarks or registered trademarks of their respective holders.
MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication.
MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the consequences of anything,
done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication.
The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical user manual.The
correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product
for the applicable use case and has to be agreed upon in writing by MEN and the customer.Should the customer purchase or use MEN products for any unintended or unauthorized
application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated with such unintended or unauthorized use, even if such claim alleges
that MEN was negligent regarding the design or manufacture of the part.
In no case is MEN liable for the correct function of the technical installation where MEN products are a part of.
Copyright © 2014 MEN Mikro Elektronik GmbH. All rights reserved.
0701-0056 Data Sheet / 2013-05-14
Page 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement