NIBCO CPC611HD34 3/4 in. Copper All Press Tee Guide

C-NPS-0720

A H E A D O F T H E F L O W

®

N I B C O

®

P r e s s S y s t e m

Business-to-Business Solutions

Look to NIBCO for technology leadership.

The velocity with which e-business evolves demands that new products and services be continuously developed and introduced to keep our customers at the center of our business efforts.

NIBCO provides an entire suite of business-to-business solutions that is changing the way we interact with customers.

NIBCOpartner.com

sm is an exclusive set of secure web applications that allow quick access to customer-specific information and online order processing. This self-service approach gives you

24/7 access to your order status putting you in total control of your business.

Real time information includes:

• Online order entry

• Inventory availability

• Viewable invoices & reports

•

•

•

Current price checks

Order status

Online library of price sheets, catalogs & submittals

Electronic Data Interchange (EDI) makes it possible to trade business documents at the speed of light. This technology cuts the cost of each transaction by eliminating the manual labor and paperwork involved in traditional order taking. This amounts to cost-savings, increased accuracy and better use of resources.

With EDI, you can trade:

• Purchase orders

• PO Acknowledgements

• Invoices

•

•

•

Product activity data

Advanced ship notices

Remittance advice

Vendor Managed Inventory (VMI) , a sophisticated service for automated inventory management, reduces your overhead by transferring inventory management, order entry and forecasting to

NIBCO. This is an on-going, interactive partnership with NIBCO.

Through automation, VMI brings results:

• Improves customer service

• Optimum inventory efficiencies

• Better forecasting

•

•

•

Cuts transaction costs

Peace of mind

Relief from day-to-day management

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH:1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/24/2020

NIBCO ® Press System

Table of Contents

Page

Contents .......................................................................................... 1

Fittings ....................................................................................... 3-10

Applications Chart ...................................................................4

Adapters ....................................................................................5

Caps ..........................................................................................5

Couplings ..................................................................................6

Elbows ....................................................................................6-8

Fitting Reducers ........................................................................8

Flanges ......................................................................................8

Tees ...........................................................................................9

Unions .....................................................................................10

Accessories .............................................................................10

Valves ...................................................................................... 11-65

Illustrated Index ................................................................ 12-13

PC-585HP-LF ............................................................................14

PC-585HP-66-LF ......................................................................15

TPC-585HP-LF

PC-585HP-LF-HC

PC-585-70 Ball Valve ..............................................................18

PC-585-70-66 Ball Valve .........................................................19

TPC-585-70 Ball Valve ............................................................20

TPC-585-70-66 Valve ..............................................................21

PC-585-70-HC Ball Valve-Hose Connection w/Cap & Chain .22

PC-585-70-66-HC Ball Valve-Hose Connection w/Cap & Chain ..23

PC-585-80-LF Lead-Free Ball Valve.........................................24

PC-585-66-LF Lead-Free Ball Valve.........................................25

PC-585-80-LF-HC Lead-Free Ball Valve...................................26

PC-585-66-LF-HC Lead-Free Ball Valve .................................27

TPC-585-80-LF Ball Valve .......................................................28

TPC-585-66-LF Ball Valve .......................................................29

PC-585-80-LF-SR Ball Valve w/Spring Return Handle ..........30

PC-585-80-LF-HC-SR Ball Valve w/Hose end and w/Spring Return Handle .........................................................31

PC-595-Y/R-LF Ball Valve .......................................................32

PC-595-Y/R-66-LF Ball Valve .................................................33

PC-FP-600A-LF Lead-Free Ball Valve ................................34-35

PC-FP-600A-LF-W Lead-Free Ball Valve ................................36

PCMT-FP-600A-LF Lead-Free Ball Valve ................................37

PCT-FP-600A-LF Lead-Free Ball Valve ...................................38

PC-FP-600A-D-LF Lead-Free Ball Valve .................................39

PC-FP-600A-LF-HC Lead-Free Ball Valve ...............................40

PCPXA-FP-600A-LF Lead-Free Ball Valve ..............................41

PCPX-FP-600A-LF Lead-Free Ball Valve .................................42

Visit our website for the most current information.

Page

PCFU-FP-600A-LF Lead-Free Ball Valve .................................43

PCMU-FP-600A-LF Lead-Free Ball Valve ...............................44

PCSU-FP-600A-LF Lead-Free Ball Valve ................................45

PCU-FP-600A-LF Lead-Free Ball Valve ...................................46

PC-FP-600A-S-LF Lead-Free Slip Valve ..................................47

PC-FP-485-LF Lead-Free Ball and Check Valve ......................48

PF-111 Gate Valve ..................................................................49

PC-111-LF Gate Valve .............................................................50

PF-113 Gate Valve ..................................................................51

PC-113-LF Gate Valve .............................................................52

PF-211-Y Globe Valve .............................................................53

PF-311-Y Angle Valve .............................................................54

PC-413-Y-LF Lead-Free Check Valve ......................................55

PF-413-Y Check Valve .............................................................56

PF-480-Y In-line Lift Check Valve ...........................................57

PFD-2000 Butterfly Valve ........................................................58

PS-585-70 Ball Valve ..............................................................59

PS-585-70-66 Ball Valve .........................................................60

PS-585-70-HC Ball Valve-Hose Connection w/Cap & Chain ....61

PF-221/222-A/B Bronze Y-Strainer .........................................62

Handle Options and Accessories ...........................................63

NIB-SEAL ® Technical Data .....................................................64

NIB-SEAL ® Locking Extended Handle Technical Data ...........65

Butterfly Valve Options and Accessories ...............................66

Butterfly Valve Technical Information ....................................67

Tools and Jaws .......................................................................68-72

Standard Pressing Tool - PC-280 ............................................69

Mini Pressing Tool - PC-20M ..................................................70

PC-10M and PC-100 Accessories ...........................................71

Approved Tool and Jaw Compatibility Matrix .......................72

Engineering Data ................................................................... 73-76

Copper and Copper Alloy Fittings ...........................................74

Sample Specification - Fittings ..............................................75

Sample Specification - Valves ................................................76

Installation Instructions ....................................................... 77-84

1/2" - 2" Fittings and Valves ..............................................79-80

2 1 /

2

" - 4" Fitting and Valves ...............................................81-82

Testing Instructions for Leak Detection ..................................83

Miscellaneous Technical Information.....................................84

Frequently Asked Questions .....................................................85

Press System Warranty ..............................................................87

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

1

A H E A D O F T H E F L O W ® www.nibco.com

Revised 11/9/2017

Quick and Easy

The NIBCO Press System is user friendly, quick and easy to install. Installation can be completed in less time than traditional solder, threaded, brazed or grooved copper systems. Significant time savings means tight budgets and deadlines are met while project delays and cost overruns are avoided.

Full System Product Offering

The NIBCO Press System is more than just 1/2" to 4" fittings. Our offering also includes the industry's widest and most specified range of ball, gate, globe, angle, check and butterfly valves in addition to a full line of NIBCO tools necessary to complete a total system installation.

Flameless

The NIBCO Press System is easier and safer to use because there is no flame, solder or flux required. Connections can even be made on a wet tube!

Reliable

With the NIBCO Press System, a watertight joint is formed between the EPDM seal and the crimped fitting or valve providing a permanent connection. Reliability you can count on ... NIBCO press fittings are backed by a 110-year-old company and a 50-year written guarantee.

Approvals, Standards and Performance

The NIBCO Press System has undergone extensive and rigorous internal and external testing and meets various worldwide, industry and governmental standards and codes. Compliant with the following except where otherwise noted: ASME 16.51

Performance • International Residential Code ® (IRC) • International Plumbing Code ® (IPC) • International Mechanical

Code ® (IMC) • Uniform Plumbing Code* (UPC) • Uniform Mechanical Code* (UMC) • State of Massachusetts (Plumbing).

*Uniform Plumbing Code and Uniform Mechanical Code are copyrighted publications of the International Association of

Plumbing and Mechanical Officials.

Third-party certified to: IAPMO PS 117, Copper, Copper Alloy, Carbon Steel, and Stainless Steel Piping System with Press-

Type and Nail-Type Connections ICC-ES LC1002, Press-Connection Fittings for Potable Water Tube and Radiant Heating

Systems ½” thru 2” ASME B16.51, Copper and Copper Alloy Press-Connect Pressure Fittings NSF/ANSI 61, Drinking Water

Systems Components—Health Effects NSF/ANSI 372, Drinking Water Systems Components—Lead Content.

All valves and fittings are manufactured under a Quality Management System conforming to the current version of

ISO 9001 standards.

Applications

The NIBCO Press System can be used in new construction or repair work and is designed for potable water, HVAC and process water systems for commercial, industrial and residential applications.

Professional Appearance

The NIBCO Press System creates a clean joint without the mess of excess solder or discoloration.

Joint Integrity

The NIBCO Press System uses engineered tools, jaws and chains that are tested and approved to ensure a consistent, reliable crimp.

Visit our website for the most current information.

2

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Fittings

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

3

www.nibco.com

A H E A D O F T H E F L O W ®

Press Fitting Applications Chart

Types of Service

Fluids/Water

Hot and Cold Potable Water

Rainwater/Gray Water

Chilled Water

Hydronic Heating

Cooling Water

Ethanol

Comments Pressure

Up to 50% Ethylene Glycol/Propylene

Glycol solution appropriate for the application temperature range

200 psi

Subject to local codes/authority having jurisdiction with appropriate precautions to prevent systems from freezing

Propylene Glycol

200 psi

200 psi

200 psi

200 psi

200 psi

Temperature

32°F to 250°F

-20°F to 250°F

-20°F to 250°F

-20°F to 250°F

-20°F to 250°F

-20°F to 250°F

Compatible with

EPDM Seal

•

•

•

•

•

•

Gasses

Compressed Air Less than 25mg/m3 Oil Content 200 psi

Oxygen - O2 (non-medical) Keep Oil and Fat Free/Non-Liquid O2 140 psi

Nitrogen - N2 200 psi

Argon Welding Use 200 psi

Hydrogen - H2 125 psi

Vacuum

Max 29.2 in. of Mercury-Hg

Carbon Dioxide - CO2

Low Pressure Steam

Dry 200 psi

15 psi

Up to 140°F

Up to 140°F

Up to 140°F

Ambient

Up to 250°F

Up to 140°F

Up to 140°F

Up to 250°F

•

•

•

•

•

•

•

•

Visit our website for the most current information.

4

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

ADAPTERS

www.nibco.com

Revised 1/3/2020

ADAPTERS

( Cont.)

PC603

Adapter P x F – Wrot

NOM. SIZE

1/2

1/2 x 3/8

1/2 x 3/4

3/4

3/4 x 1/2

1

1 x 1/2

1 x 3/4

1 x 1 1/4

1 1/4

1 1/4 x 1

1 1/4 x 1 1/2

1 1/2

1 1/4 x 2

1 1/2 x 1 1/4

2

2 1/2

3

4

PC603-2

Extended Adapter FTG x F – Wrot

NOM. SIZE

1/2 x 3/8

1/2

1/2 x 3/4

3/4 x 1/2

3/4

1 x 1/2

1

1 1/4 x 1/2

1 1/4

1 1/2

2

APPROX.

NET WT./LBS.

.436

.372

.359

.425

.518

.276

.515

.672

.103

.081

.151

.158

.153

.237

.172

.217

1.222

1.756

3.238

APPROX.

NET WT./LBS.

DIM. B

INCHES

0.064

0.096

0.132

0.107

1 17 /

32

1 3 /

4

1 27 /

32

1 25 /

32

0.145

0.146

1

8

0.220 1

2

2

16

0.193

0.289

2 3 /

16

2 3 /

8

0.431

0.683

2 21 /

32

2 /

16

DIM. A

INCHES

1 3 /

16

1 1 /

16

1 1 /

16

1 7 /

32

1 1 /

16

1

1

1

1 13 /

32

1 23 /

32

1 7 /

8

25 /

32

15 /

16

3 /

4

13 /

16

13 /

16

21 /

32

31 /

32

27 /

32

PC604

Adapter P x M – Wrot

NOM. SIZE

1/2

1/2 x 3/8

1/2 x 3/4

3/4

3/4 x 1/2

3/4 x 1

1

1 x 3/4

1 x 1 1/4

1 1/4

1 1/4 x 1

1 1/4 x 1 1/2

1 1/2

1 1/2 x 1 1/4

1 1/2 x 2

2

2 x 1 1/2

2 1/2

3

4

APPROX.

NET WT./LBS.

.457

.467

.335

.537

.696

.603

.784

.856

.103

.105

.191

.180

.189

.268

.255

.253

1.087

1.322

2.104

3.298

PC604-2

Extended Adapter FTG x M – Wrot

NOM. SIZE

1/2 x 3/8

1/2

1/2 x 3/4

3/4 x 1/2

3/4

1 x 3/4

1

1 1/4

1 1/2

2

APPROX.

NET WT./LBS.

DIM. B

INCHES

0.056

0.101

0.145

0.100

0.136 2 1 /

16

0.175 2 1 /

16

0.243 2 5 /

16

0.408

0.530

1 3 /

4

1 29 /

32

2 1 /

16

1 15 /

16

2 17 /

32

2 7 /

8

0.782 3 11 /

32

DIM. B

INCHES

1 3 /

16

1 3 /

32

1 1 /

32

1 17 /

32

1 13 /

32

1 3 /

16

1 1 /

2

1 1 /

2

7 /

8

27 /

32

1 1 /

4

1 1 /

16

31 /

32

1 3 /

8

1 7 /

16

1 7 /

16

1 19 /

32

1 27 /

32

2 1 /

8

2 9 /

32

PC604-P

Adapter PEX x P – Wrot

NOM. SIZE

1/2 x 1/2

1/2 x 3/4

3/4 x 1/2

3/4 x 3/4

1 x 1

CAPS

PC617

Cap P – Wrot

NOM. SIZE

1/2

3/4

1

1 1/4

1 1/2

2

2 1/2

3

4

APPROX.

NET WT./LBS.

.055

.108

.057

.108

.148

APPROX.

NET WT./LBS.

.046

.087

.125

.171

.314

.493

.476

.713

1.491

DIM. B

INCHES

1 /

8

7 /

32

3 /

32

5 /

32

5 /

32

DIM. N

INCHES

3 /

32

3 /

32

7 /

32

7 /

32

1 /

4

5 /

32

5 /

32

1 /

8

3 /

32

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

5

A H E A D O F T H E F L O W ®

COUPLINGS COUPLINGS

( Cont.) www.nibco.com

Revised 10/7/2019

COUPLINGS

( Cont.)

PC600-DS

Coupling P x P – Wrot

NOM. SIZE

1/2

3/4

1

1 1/4

1 1/2

2

2 1/2

3

4

APPROX.

NET WT./LBS.

.083

.157

.198

.271

.530

.691

.669

.979

2.134

DIM. A

INCHES

3 /

16

5 /

32

5 /

32

5 /

32

3 /

16

5 /

32

1 /

8

1 /

8

7 /

32

PC600-RS

Coupling P x P – Wrot

NOM. SIZE

2 1/2

3

4

APPROX.

NET WT./LBS.

.688

.979

2.134

DIM. A

INCHES

1 /

8

1 /

8

7 /

32

PC600-R

Reducing Coupling P x P – Wrot

NOM. SIZE

3/4 x 1/2

1 x 1/2

1 x 3/4

1 1/4 x 3/4

1 1/4 x 1

1 1/2 x 3/4

1 1/2 x 1

1 1/2 x 1 1/4

2 x 3/4

2 x 1

2 x 1 1/4

2 x 1 1/2

2 1/2 x 1

2 1/2 x 1 1/4

2 1/2 x 1 1/2

2 1/2 x 2

3 x 1 1/2

3 x 2

3 x 2 1/2

4 x 2

4 x 2 1/2

4 x 3

APPROX.

NET WT./LBS.

.956

1.032

.951

1.949

1.807

1.960

.516

.552

.570

.662

.620

.644

.678

.699

.121

.139

.184

.245

.231

.382

.370

.399

DIM. A

INCHES

29 /

32

11 /

16

11 /

16

7 /

16

31 /

32

23

1

/

32

11 /

32

1 1 /

16

23 /

32

1 /

4

7 /

16

13 /

32

1 /

2

7 /

16

15 /

32

13 /

32

9 /

32

1 /

2

1 5 /

32

1

27 /

32

PC601L

Extended Repair Coupling P x P

NOM. SIZE

1/2

3/4

1

1 1/4

1 1/2

2

APPROX.

NET WT./LBS.

DIM. B

INCHES

0.1250

0.2200

2 29

3

0.3050 3

/

32

32

0.4090

0.7150

1.0230

4 1 /

16

4 21

1 /

/

/

32

32

4

PC636

Crossover Coupling P x P – Wrot

NOM. SIZE

1/2

APPROX.

NET WT./LBS.

.222

DIM. A

INCHES

2 5 /

32

ELBOWS

PC601 (No Stop)

Repair Coupling P x P – Wrot

NOM. SIZE

APPROX.

NET WT./LBS.

DIM. B

INCHES

1/2

3/4

1 1/4

1 1/2

2

2 1/2

3

4

.082

.157

1 .190

.271

.511

.691 3 5 /

8

.669

.979

1.878

2

3 11 /

32

2

3

4

1

2

2

3

1

1

15

15

5

5 /

/

/

/

/

/

/

4

4

4

32

16

16

16

PC606

45° Elbow P x P – Wrot

NOM. SIZE

APPROX. DIM. C DIM. D

NET WT./LBS. INCHES INCHES

1/2 .092

3/4 .181

1 .251

1 1/4

1 1/2

2

2 1/2

3

4

.403

.666

3 /

8

1 /

2

5 /

8

25 /

32

25 /

32

15 /

16

15 /

16

1.063 1 3 /

16

1 3 /

16

1.041 29 /

32

29 /

32

1.536 1 1 /

8

1 1 /

8

3.375 1 11 /

16

1 11 /

16

Visit our website for the most current information.

6

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

ELBOWS

( Cont.) www.nibco.com

Revised 3/12/2020

PC606-2

45° Elbow Ftg x P – Wrot

NOM. SIZE

1/2

3/4

1

1 1/4

1 1/2

2

2 1/2

3

4

APPROX. DIM. B DIM. C

NET WT/LBS. INCHES INCHES

.094 1 5 /

16

7 /

16

.171 1 13 /

32

17 /

32

.248 1 17 /

32

9 /

16

.368 1 3 /

4

11 /

16

.673 2 5 /

16

13 /

16

1.057 2 5 /

8

1

1.050 2 3 /

16

29 /

32

1.526 2 19 /

32

1 5 /

32

3.284 3 3 /

32

1 17 /

32

PC607-2

90° Elbow Ftg x P – Wrot

NOM. SIZE

APPROX. DIM. B DIM. C

NET WT/LBS. INCHES INCHES

1/2 .110 1 21 /

32

27 /

32

3/4 .219 2 7 /

32

1 1 /

16

1

1 1/4

.319 2 1 /

2

1 13 /

32

.490 3 3 /

32

1 29 /

32

3 15 /

16

2 7 /

32

1 1/2

2

2 1/2

3

4

.871

1.474 4 17 /

32

2 29 /

32

1.356 3 7 /

32

1 19 /

32

2.065 3 13 /

16

2

3.920 4 3 /

4

2 15 /

32

PC607-3

90° Elbow P x F - Wrot

NOM. SIZE

APPROX. DIM. A DIM. C

NET WT/LBS. INCHES INCHES

1/2

3/4

.191 2 1 /

2

25 /

32

1/2 x 3/8 .148

1/2 x 3/4 .243

2

2 7 /

32

25 /

32

11 /

16

25 /

32

.361 3 3 /

32

1 1 ⁄

16

3/4 x 1/2 .321

1

1 1/4

1 1/2

2

.513

.892

1.314

2.109

2

3

13

15

⁄

⁄

16

32

1

1

1

13

⁄

⁄

16

32

4 3 ⁄

16

1 27 ⁄

32

5 1 ⁄

16

2 7 ⁄

32

5 5 ⁄

8

2 29 ⁄

32

PC607

90° Elbow P x P – Wrot

NOM. SIZE

APPROX. DIM. C DIM. D

NET WT./LBS. INCHES INCHES

1/2 .110 23 /

32

3/4 .223 1 3 /

32

1 3 /

32

3/4 x 1/2

1

1 x 3/4

1 1/4

1 1/2

2

2 1/2

3

4

.201

1 1 /

32

1 5 /

32

.331 1 7 /

16

1 7 /

16

.321

.528

.895 2 7 /

32

2 7 /

32

1.480 2 15 /

16

2 15 /

16

1.224

1.900

1 5 /

16

1 7 /

16

1 27 /

32

1 27 /

32

1 5 /

8

1 5 /

8

2 2

3.935 2 15 /

32

2 15 /

32

PC607-LT

90° Long Radius Elbow

P x P – Wrot

NOM. SIZE

2 1/2

3

4

APPROX. DIM. C DIM. D

NET WT/LBS. INCHES INCHES

2.066 3 11 /

16

3 11 /

16

2.810 4 1 /

32

4 1 /

32

5.696 5 1 /

4

5 1 /

4

PC607-4

90° Elbow P x M - Wrot

NOM. SIZE

APPROX. DIM. B DIM. C

NET WT/LBS. INCHES INCHES

1/2

1/2 x 3/4

.183

.245

2 9 ⁄

32

25 ⁄

32

2 21 /

32

25 ⁄

32

3/4 .373 3 1 1 /

16

3/4 x 1/2

1

.340 3 1 /

16

1 1 /

16

.521 3 3 ⁄

8

1 7 ⁄

16

1 1/4

1 1/2

.926

1.433

4 1 ⁄

32

1 27 ⁄

32

4 29 /

32

2 7 /

32

2 2.205 5 5 /

8

2 29 /

32

B

PC607-2-LT

90° Long Radius Elbow

Ftg x P - Wrot

NOM. SIZE

2 1/2

3

APPROX. DIM. B DIM. C

NET WT/LBS. INCHES INCHES

2.114 5 7 /

32

3 11 /

16

3.037 5 3 /

4

4 1 /

32

C

PC607E-2

Extended Elbow P x FTG – Wrot

NOM. SIZE

APPROX. DIM. B DIM. C

NET WT/LBS. INCHES INCHES

3/4 .407 29 /

32

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

7

A H E A D O F T H E F L O W ®

ELBOWS

( Cont.)

FITTING REDUCERS

www.nibco.com

Revised 11/5/2019

FLANGES

PC705-D

Vent Elbow P x P – Forged Brass

NOM. SIZE

APPROX. DIMENSIONS

NET WT. INCHES

LBS. C D E

1/2 .010

19 /

32

19 /

32

9 /

16

3/4 .010

3 /

4

3 /

4

11 /

16

PC605

Stiffener – Wrot

NOM. SIZE

3/4

PC707-3-5-LF

APPROX.

NET WT. LBS.

.043

90° Drop Elbow P x F – Cast

*Lead Free

NOM. SIZE

APPROX. DIMENSIONS

NET WT. INCHES

LBS. A C E

1/2 .252

17 /

32

7 /

8

27 /

32

3/4 .588

23 /

32

1 5 /

8

31 /

32

PC600-2

Fitting Reducer Ftg x P – Wrot

NOM. SIZE

2 x 3/4

2 x 1

2 X 1 1/4

2 x 1 1/2

2

2 1/2 x 1

2 1/2 x 1 1/4

2 1/2 x 1 1/2

2 1/2 x 2

3 x 1 1/4

3 x 1 1/2

3 x 2

3 x 2 1/2

4 x 2

4 x 2 1/2

4 x 3

1/2

3/4 x 1/2

3/4

1 x 1/2

1 x 3/4

1

1 1/4 x 1/2

1 1/4 x 3/4

1 1/4 x 1

1 1/4

1 1/2 x 1/2

1 1/2 x 3/4

1 1/2 x 1

1 1/2 x 1 1/4

1 1/2

2 x 1/2

A

APPROX.

NET WT/LBS.

DIM. A

INCHES

.882

1.055

1.084

.820

1.832

1.837

2.013

.248

.251

.251

.382

.394

.405

.398

.420

.507 1 31 /

32

.619 1 9 /

16

.707

.776

.840

.839

.610 21 /

32

.092 1 7 /

16

.126 31 /

.123

.151

.162

.155

.175

.181

.215

.243

32

1 7 /

16

1 13 /

32

1 1 /

8

1 25 /

32

1 5 /

16

2 1 /

2

2 11 /

32

2 7 /

32

2 3 /

32

1 19 /

32

1 13 /

32

1 7 /

16

1 3 /

16

1

2 3 /

32

31 /

32

1 13 /

16

2 1 /

2

2 9 /

16

2 13 /

32

2

2 13 /

16

2 13 /

16

2 3 /

8

2 1 /

4

3 5 /

8

3 1 /

32

3 1 /

32

PC741

Companion Flange

P x Flange - Cast Bronze Flange/

Wrot Outlet

NOM. SIZE

1

1 1/4

1 1/2

2

APPROX. DIMENSIONS

NET WT.

LBS.

INCHES

B F G W

1.428 1 1 /

4

4 1 /

4

1 /

4

3 1 /

8

1.632 1 5 /

16

4 5 /

8

1 /

4

3 1 /

2

2.186 1 7 /

16

5 5 /

16

3 7 /

8

3.352 1 11 /

16

6 3 /

8

4 3 /

4

NOTE: Maximum pressure 105 psi CWP, 90 psi at 250°F.

Use in U.S. drinking water applications is prohibited after

January 3, 2014.

PC641

Companion Flange

P x Flange - Wrot

APPROX.

NET WT.

DIMENSIONS

INCHES

NOM. SIZE LBS. A B C

3/4

1

1 1/4

1 1/2

2

2 1/2

3

4

1.518 1 21 /

32

2 17 /

32

7 /

16

2.013 1 23 /

32

2 19 /

32

1 /

2

2.623 1 21 /

32

2 21 /

32

9 /

16

3.342 1 1 /

2

2 7 /

8

5 /

8

4.884 1 15 /

32

2 11 /

32

5 /

8

6.418 3 /

4

2 25 /

32

5 /

8

7.409 15 /

32

2 15 /

16

21 /

32

10.920 21 /

32

3 3 /

8

23 /

32

DIMENSIONS INCHES

NOM. SIZE D E F G

3/4

1

1 1/4

1 1/2

2

2 1/2

3

4

9

5

11

25

25

3

13

/

16

2 3 /

4

3 7 /

8

5 /

8

/

/

8

3 1 /

8

4 1 /

4

5 /

8

/

16

3 1 /

2

4 5 /

8

5 /

8

/

32

3 7 /

8

/

32

4 3 /

4

4

5 1 /

2

5

6

5

3

/

/

7 3 /

4

/

16

6 7 1 /

2

3 /

4

1 7 1 /

2

9 3 /

4

8

4

PC707-3-5-A

Hi-Ear Elbow P x F – Cast *Lead

Free

NOM. SIZE

1/2

APPROX. DIM. C DIM. E

NET WT/LBS. INCHES INCHES

.192 7 /

8

27 /

32

PC607-2EW Stub-Out F x S

NOM. SIZE

1/2

3/4

1

APPROX.

NET WT/LBS.

.360

.520

.740

DIM. A

INCHES

3

3

6

15

1

5

/

/

/

8

16

16

NOTE: 4" requires (8) "G" holes equally spaced.

NOTE: Mates with ANSI Class 125/150 fl anges.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25%

Visit our website for the most current information.

8

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

Revised 2/28/2020

TEES

PC611

Tee P x P x P – Wrot

NOM. SIZE

APPROX. DIMENSIONS

NET WT. INCHES

LBS. C F G

1/2 .176

23 /

32

23 /

32

15 /

32

1/2 x 1/2 x 3/4

1/2 x 1/2 x 1

3/4 x 1/2 x 1/2

3/4 x 1/2 x 3/4

3/4 x 3/4 x 1/2

3/4 x 3/4 x 1

1

1 x 1/2 x 3/4

1 x 1/2 x 1

1 x 3/4 x 1/2

1 x 3/4 x 3/4

1 x 3/4 x 1

1 x 1 x 1/2

1 x 1 x 3/4

1 x 1 x 1 1/4

1 1/4

.314

2 1 /

16

2 1 /

16

15 /

16

.491 1

3/4 .320

.281

.320

.276

.461 1

.501

.400

5

21

21

7

23

7

1

/

/

/

/

/

/

/

8

8

32

32

32

32

32

1

25

29

1

21

1

1

7

1

7

1

1

/

/

/

/

/

/

/

8

32

/

32

32

16

32

32

7

21

11

21

29

29

4 27

/

/

/

/

/

/

/

8

32

16

32

32

32

32

.513 13 /

16

1 5 /

32

27 /

32

.440 13 /

16

1 1 /

16

1 5 /

32

.459

.578

.324

.388

25

13

21

.723 1

3

1

/

/

/

/

.759 1

/

32

16

4

8

31

1

32 21

1

3

1

/

/

/

1

1

/

/

32

16

32

4

8

13

7

7

27

7

15

/

/

/

/

/

/

16

8

8

32

8

16

1 1/4 x 1/2 x 11/4 .690 31 /

32

1 17 /

32

31 /

32

1 1/4 x 1 x 1/2 .674 31 /

32

1 5 /

32

1 5 /

8

1 1/4 x 3/4 x 1/2 .682 15 /

16

1 9 /

32

1 5 /

8

1 1/4 x 3/4 x 3/4 .565 3 /

4

1 7 /

32

1 1 /

32

1 1/4 x 3/4 x 1 .709 31 /

32

1 1 /

4

1 5 /

16

1 1/4 x 3/4 x 1 1/4 .698 31 /

32

1 9 /

32

15 /

16

1 1/4 x 1 x 3/4

1 1/4 x 1 x 1

.753 27 /

32

1 3 /

16

1 13 /

32

.725 31 /

32

1 7 /

32

1 9 /

32

1 1/4 x 1 1/4 x 1/2 .408 1 1 1 17 /

32

1 1/4 x 1 1/4 x 3/4 .589 23 /

32

23 /

32

15 /

16

1 1/4 x 1 1/4 x 1 .508 7 /

8

7 /

8

31 /

32

1 1/2 1.179 15 /

16

15 /

16

1 3 /

32

1 1/2 x 1/2 x 1 1/2 1.263 29 /

32

1 29 /

32

1

1 1/2 x 3/4 x 3/4 1.101 29 /

32

1 13 /

16

1 3 /

4

1 1/2 x 1 x 3/4

1 1/2 x 1 x 1

1.217 15 /

16

1 3 /

4

1 13 /

16

1.105 13 /

16

1 11 /

16

1 19 /

1 1/2 x 1 x 1 1/2 1.146 27 /

32

1 21 /

32

1 1 /

8

1 1/2 x 1 1/4 x 3/4 1.164 31 /

32

1 5 /

8

1 7 /

8

1 1/2 x 1 1/4 x 1 1.105 7 /

8

1 19 /

32

1 5 /

8

32

1 1/2 x 1 1/4 x 1 1/4 1.160 15 /

16

1 9 /

16

1 19 /

32

1 1/2 x 1 1/2 x 1/2 .639 3 /

8

3 /

8

1 1 /

8

1 1/2 x 1 1/2 x 3/4 .740 19 /

32 19

/

32

1 3 /

32

1 1/2 x 1 1/2 x 1 .785 11 /

16 11

/

16

1 3 /

16

1 1/2 x 1 1/2 x 1 1/4 1.262 7 /

8

7 /

8

1 19 /

32

2

2 x 1/2 x 2

2 x 1 x 1

1.771 1 13 /

32

1 13 /

32

1 13 /

32

1.663 1 13 /

32

2 1 /

2

1 7 /

16

1.764 1 13 /

32

2 1 /

4

2 7 /

32

NOM. SIZE

APPROX.

NET WT.

LBS. C

DIMENSIONS

INCHES

F G

2 x 1 x 2 1.564 1 13 /

32

2 5 /

32

1 13 /

32

2 x 1 1/4 x 1 1/4 1.471 1 11 /

32

2 1 /

16

2 1 /

8

2 x 1 1/2 x 3/4

2 x 1 1/2 x 1

1.542 1 11 /

32

1 29 /

32

2 1 /

4

1.546 1 3 /

8

1 29 /

32

2 1 /

4

2 x 1 1/2 x 1 1/4 1.543 1 3 /

8

1 29 /

32

2 5 /

32

2 x 1 1/2 x 1 1/2 1.670 1 1 /

8

1 9 /

16

1 13 /

32

2 x 1 1/2 x 2

2 x 2 x 1/2

2 x 2 x 3/4

2 x 2 x 1

1.787 1 5 /

32

1 11 /

16

1 1 /

2

1.576 1 3 /

8

1 3 /

8

2 7 /

16

1.256 3 /

4

3 /

4

1 1 /

2

1.530 29 /

32 29

/

32

1 11 /

16

2 x 2 x 1 1/4

2 x 2 x 1 1/2

1.576 1 3 /

8

1 3 /

8

2 1 /

8

1.770 1 1 /

8

1 1 /

8

1 1 /

2

2 1/2 2.082 1 9 /

16

1 9 /

16

1 7 /

8

2 1/2 x 3/4 x 2 1/2 2.294 1 21 /

32

2 7 /

8

1 13 /

16

2 1/2 x 1 x 2 1/2 2.004 1 1 /

2

2 1 /

2

1 25 /

32

2 1/2 x 1 1/4 x 2 1/2 2.081 1 21 /

32

2 17 /

32

1 13 /

16

2 1/2 x 1 1/2 x 2 1/2 2.973 1 25 /

32

2 7 /

16

1 7 /

8

2 1/2 x 2 x 3/4

2 1/2 x 2 x 1

2.934 1 13 /

16

1 31 /

32

2 15 /

16

2.907 1 27 /

32

2 1 /

32

2 3 /

4

2 1/2 x 2 x 1 1/4 2.954 1 11 /

16

2 2 19 /

32

2 1/2 x 2 x 1 1/2 2.976 1 23 /

32

2 2 15 /

32

2 1/2 x 2 x 2 3.046 1 13 /

16

1 31 /

32

2 1 /

4

2 1/2 x 2 x 2 1/2 2.150 1 13 /

16

1 31 /

32

1 7 /

8

2 1/2 x 2 1/2 x 1/2 2.117 1 21 /

32

1 21 /

32

3 1 /

4

2 1/2 x 2 1/2 x 3/4 2.011 1 9 /

16

1 9 /

16

2 15 /

16

2 1/2 x 2 1/2 x 1 2.010 1 11 /

16

1 11 /

16

2 3 /

4

2 1/2 x 2 1/2 x 1 1/4 2.075 1 21 /

32

1 21 /

32

2 21 /

32

2 1/2 x 2 1/2 x 1 1/2 2.966 1 27 /

32

1 27 /

32

2 1 /

2

2 1/2 x 2 1/2 x 2 2.957 1 25 /

32

1 25 /

32

2 1 /

4

3

3 x 3/4 x 3

3 x 1 x 3

3 x 1 1/4 x 3

3 x 1 1/2 x 3

3 x 2 x 2

3 x 2 x 2 1/2

3 x 2 x 3

3.122 1 15 /

16

1 15 /

16

2 1 /

32

3.049 1 7 /

8

3 1 /

2

2 3 /

16

3.043 1

2.986 1

7

7

/

/

8

8

2

3 3

15

/

/

16

16

2

2

3

1

/

/

16

8

3.811 2 1 /

32

2 25 /

32

2 13 /

32

3.829 1 31 /

32

2 21 /

32

2 3 /

4

3.761 2 1

3.866 2

/

32

2

2

21

21

/

/

32

32

2

2

1

3

/

/

2

8

3 x 2 1/2 x 2 3.081 1 7 /

8

2 7 /

16

2 13 /

16

3 x 2 1/2 x 2 1/2 3.010 1 13 /

16

2 15 /

32

2 1 /

2

3 x 2 1/2 x 3

3 x 3 x 1/2

3 x 3 x 3/4

3 x 3 x 1

3 x 3 x 1 1/4

3 x 3 x 1 1/2

3.194 1 13 /

16

2 15 /

32

2 3 /

16

2.945 1 7 /

8

1 7 /

8

3 17 /

32

2.941 1 7 /

8

1 7 /

8

3 1 /

2

2.987 1 7 /

8

1 7 /

8

3 5 /

16

2.957 1 7 /

8

1 7 /

8

2 15 /

16

3.056 1 7 /

8

1 7 /

8

2 13 /

16

NOM. SIZE

APPROX.

NET WT.

LBS. C

DIMENSIONS

INCHES

F G

3 x 3 x 2 3.145 1 7 /

8

1 7 /

8

2 11 /

16

3 x 3 x 2 1/2 3.034 1 15 /

16

1 15 /

16

2 1 /

2

4

4 x 2 x 4

7.169 2 13 /

32

2 13 /

32

2 17 /

32

7.069

2 3 /

8

3 19 /

32

2 19 /

32

4 x 2 1/2 x 4 6.984

2 3 /

8

3 25 /

32

2 23 /

32

4 x 3 x 2 6.965

2 3 /

8

3 9 /

16

3 25 /

32

4 x 3 x 2 1/2 6.990

2 3 /

8

3 9 /

16

3 29 /

32

4 x 3 x 3

4 x 3 x 4

7.085

2 3 /

8

3 9 /

16

3 1 /

2

6.993

2 3 /

8

3 23 /

32

2 23 /

32

4.328

1 11 /

32

1 11 /

32

3 11 /

32

4.415

1 11 /

32

1 11 /

32

3 5 /

16

4 x 4 x 1/2

4 x 4 x 3/4

4 x 4 x 1 4.414

1 11 /

32

1 11 /

32

3 1 /

8

4 x 4 x 1 1/4 4.730

1 7 /

16

1 7 /

16

3 3 /

32

4 x 4 x 1 1/2 7.144

2 11 /

32

2 11 /

32

3 31 /

32

4 x 4 x 2

4 x 4 x 2 1/2 6.925

2 3 /

8

2 3 /

8

3 29 /

32

4 x 4 x 3

7.094

2 11 /

32

2 11 /

32

3 13 /

16

7.083

2 3 /

8

2 3 /

8

3 1 /

2

PC612

Tee P x P x F – Wrot

NOM. SIZE

APPROX. DIMENSIONS

NET WT. INCHES

LBS. E F G

1/2 .257

1 31 /

32

23 /

32

23 /

32

3/4

3/4 x 3/4 x 1/4

3/4 x 3/4 x 1/2

1 x 1 x 1/2

1 x 1 x 3/4

.258

2 5 /

32

21 /

32

21 /

32

.393 2 1 /

4

21 /

32

21 /

32

.516 2 27 /

32

21 /

32

21 /

32

1 1/4 x 1 1/4 x 1/2 .494 2 13 /

32 5

/

8

5 /

8

1 1/4 x 1 1/4 x 3/4 .679 2 5 /

8

11 /

16

11 /

16

1 1/2 x 1 1/2 x 1/2 .733 2 11 /

16 3

/

8

3 /

8

1 1/2 x 1 1/2 x 3/4 .885 2 7 /

8 19

/

32 19

/

32

2 x 2 x 1/2

2 x 2 x 3/4

.434 2 11 /

32

25 /

32 25

/

32

.385 23 /

32

23 /

32

2 1 /

32

1.699 3

2 1/2 x 2 1/2 x 2 1.925 3 7 /

32

1 9 /

32

3 x 3 x 3/4

3 x 3 x 2

4 x 4 x 3/4

4 x 4 x 2

1.370 3

2 1/2 x 2 1/2 x 3/4 1.049 2

27

3

15

/

1.435 2 3 /

2.097 3 15 /

2.786 3 1 /

/

/

32

16

4

1

32

11 /

32

4

3

11 /

21 /

11 /

3

3.675 4 1 9 /

/

/

4

8

1

16

11 /

16

32

16

32

1 9 /

1

3

11 /

21 /

11 /

9

/

3

/

/

4

8

16

32

16

32

16

32

TEES

A H E A D O F T H E F L O W ® www.nibco.com

Revised 2/28/2020

PC611

Tee P x P x P – Wrot

NOM. SIZE

APPROX. DIMENSIONS

NET WT. INCHES

LBS. C F G

1/2 .176

23 /

32

23 /

32

15 /

32

1/2 x 1/2 x 3/4

1/2 x 1/2 x 1

3/4 x 1/2 x 1/2

3/4 x 1/2 x 3/4

3/4 x 3/4 x 1/2

3/4 x 3/4 x 1

1

1 x 1/2 x 3/4

1 x 1/2 x 1

1 x 3/4 x 1/2

1 x 3/4 x 3/4

1 x 3/4 x 1

1 x 1 x 1/2

1 x 1 x 3/4

1 x 1 x 1 1/4

1 1/4

.314

2 1 /

16

2 1 /

16

15 /

16

.491 1

3/4 .320

.281

.320

.276

.461 1

.501

.400

5

21

21

7

23

7

1

/

/

/

/

/

/

/

8

8

32

32

32

32

32

1

25

29

1

21

1

1

7

1

7

1

1

/

/

/

/

/

/

/

8

32

/

32

32

16

32

32

7

21

11

21

29

29

4 27

/

/

/

/

/

/

/

8

32

16

32

32

32

32

.513 13 /

16

1 5 /

32

27 /

32

.440 13 /

16

1 1 /

16

1 5 /

32

.459

.578

.324

.388

25

13

21

.723 1

3

1

/

/

/

/

.759 1

/

32

16

4

8

31

1

32 21

1

3

1

/

/

/

1

1

/

/

32

16

32

4

8

13

7

7

27

7

15

/

/

/

/

/

/

16

8

8

32

8

16

1 1/4 x 1/2 x 11/4 .690 31 /

32

1 17 /

32

31 /

32

1 1/4 x 1 x 1/2 .674 31 /

32

1 5 /

32

1 5 /

8

1 1/4 x 3/4 x 1/2 .682 15 /

16

1 9 /

32

1 5 /

8

1 1/4 x 3/4 x 3/4 .565 3 /

4

1 7 /

32

1 1 /

32

1 1/4 x 3/4 x 1 .709 31 /

32

1 1 /

4

1 5 /

16

1 1/4 x 3/4 x 1 1/4 .698 31 /

32

1 9 /

32

15 /

16

1 1/4 x 1 x 3/4

1 1/4 x 1 x 1

.753 27 /

32

1 3 /

16

1 13 /

32

.725 31 /

32

1 7 /

32

1 9 /

32

1 1/4 x 1 1/4 x 1/2 .408 1 1 1 17 /

32

1 1/4 x 1 1/4 x 3/4 .589 23 /

32

23 /

32

15 /

16

1 1/4 x 1 1/4 x 1 .508 7 /

8

7 /

8

31 /

32

1 1/2 1.179 15 /

16

15 /

16

1 3 /

32

1 1/2 x 1/2 x 1 1/2 1.263 29 /

32

1 29 /

32

1

1 1/2 x 3/4 x 3/4 1.101 29 /

32

1 13 /

16

1 3 /

4

1 1/2 x 1 x 3/4

1 1/2 x 1 x 1

1.217 15 /

16

1 3 /

4

1 13 /

16

1.105 13 /

16

1 11 /

16

1 19 /

1 1/2 x 1 x 1 1/2 1.146 27 /

32

1 21 /

32

1 1 /

8

1 1/2 x 1 1/4 x 3/4 1.164 31 /

32

1 5 /

8

1 7 /

8

1 1/2 x 1 1/4 x 1 1.105 7 /

8

1 19 /

32

1 5 /

8

32

1 1/2 x 1 1/4 x 1 1/4 1.160 15 /

16

1 9 /

16

1 19 /

32

1 1/2 x 1 1/2 x 1/2 .639 3 /

8

3 /

8

1 1 /

8

1 1/2 x 1 1/2 x 3/4 .740 19 /

32 19

/

32

1 3 /

32

1 1/2 x 1 1/2 x 1 .785 11 /

16 11

/

16

1 3 /

16

1 1/2 x 1 1/2 x 1 1/4 1.262 7 /

8

7 /

8

1 19 /

32

2

2 x 1/2 x 2

2 x 1 x 1

1.771 1 13 /

32

1 13 /

32

1 13 /

32

1.663 1 13 /

32

2 1 /

2

1 7 /

16

1.764 1 13 /

32

2 1 /

4

2 7 /

32

NOM. SIZE

APPROX.

NET WT.

LBS. C

DIMENSIONS

INCHES

F G

2 x 1 x 2 1.564 1 13 /

32

2 5 /

32

1 13 /

32

2 x 1 1/4 x 1 1/4 1.471 1 11 /

32

2 1 /

16

2 1 /

8

2 x 1 1/2 x 3/4

2 x 1 1/2 x 1

1.542 1 11 /

32

1 29 /

32

2 1 /

4

1.546 1 3 /

8

1 29 /

32

2 1 /

4

2 x 1 1/2 x 1 1/4 1.543 1 3 /

8

1 29 /

32

2 5 /

32

2 x 1 1/2 x 1 1/2 1.670 1 1 /

8

1 9 /

16

1 13 /

32

2 x 1 1/2 x 2

2 x 2 x 1/2

2 x 2 x 3/4

2 x 2 x 1

1.787 1 5 /

32

1 11 /

16

1 1 /

2

1.576 1 3 /

8

1 3 /

8

2 7 /

16

1.256 3 /

4

3 /

4

1 1 /

2

1.530 29 /

32 29

/

32

1 11 /

16

2 x 2 x 1 1/4

2 x 2 x 1 1/2

1.576 1 3 /

8

1 3 /

8

2 1 /

8

1.770 1 1 /

8

1 1 /

8

1 1 /

2

2 1/2 2.082 1 9 /

16

1 9 /

16

1 7 /

8

2 1/2 x 3/4 x 2 1/2 2.294 1 21 /

32

2 7 /

8

1 13 /

16

2 1/2 x 1 x 2 1/2 2.004 1 1 /

2

2 1 /

2

1 25 /

32

2 1/2 x 1 1/4 x 2 1/2 2.081 1 21 /

32

2 17 /

32

1 13 /

16

2 1/2 x 1 1/2 x 2 1/2 2.973 1 25 /

32

2 7 /

16

1 7 /

8

2 1/2 x 2 x 3/4

2 1/2 x 2 x 1

2.934 1 13 /

16

1 31 /

32

2 15 /

16

2.907 1 27 /

32

2 1 /

32

2 3 /

4

2 1/2 x 2 x 1 1/4 2.954 1 11 /

16

2 2 19 /

32

2 1/2 x 2 x 1 1/2 2.976 1 23 /

32

2 2 15 /

32

2 1/2 x 2 x 2 3.046 1 13 /

16

1 31 /

32

2 1 /

4

2 1/2 x 2 x 2 1/2 2.150 1 13 /

16

1 31 /

32

1 7 /

8

2 1/2 x 2 1/2 x 1/2 2.117 1 21 /

32

1 21 /

32

3 1 /

4

2 1/2 x 2 1/2 x 3/4 2.011 1 9 /

16

1 9 /

16

2 15 /

16

2 1/2 x 2 1/2 x 1 2.010 1 11 /

16

1 11 /

16

2 3 /

4

2 1/2 x 2 1/2 x 1 1/4 2.075 1 21 /

32

1 21 /

32

2 21 /

32

2 1/2 x 2 1/2 x 1 1/2 2.966 1 27 /

32

1 27 /

32

2 1 /

2

2 1/2 x 2 1/2 x 2 2.957 1 25 /

32

1 25 /

32

2 1 /

4

3

3 x 3/4 x 3

3 x 1 x 3

3 x 1 1/4 x 3

3 x 1 1/2 x 3

3 x 2 x 2

3 x 2 x 2 1/2

3 x 2 x 3

3.122 1 15 /

16

1 15 /

16

2 1 /

32

3.049 1 7 /

8

3 1 /

2

2 3 /

16

3.043 1

2.986 1

7

7

/

/

8

8

2

3 3

15

/

/

16

16

2

2

3

1

/

/

16

8

3.811 2 1 /

32

2 25 /

32

2 13 /

32

3.829 1 31 /

32

2 21 /

32

2 3 /

4

3.761 2 1

3.866 2

/

32

2

2

21

21

/

/

32

32

2

2

1

3

/

/

2

8

3 x 2 1/2 x 2 3.081 1 7 /

8

2 7 /

16

2 13 /

16

3 x 2 1/2 x 2 1/2 3.010 1 13 /

16

2 15 /

32

2 1 /

2

3 x 2 1/2 x 3

3 x 3 x 1/2

3 x 3 x 3/4

3 x 3 x 1

3 x 3 x 1 1/4

3 x 3 x 1 1/2

3.194 1 13 /

16

2 15 /

32

2 3 /

16

2.945 1 7 /

8

1 7 /

8

3 17 /

32

2.941 1 7 /

8

1 7 /

8

3 1 /

2

2.987 1 7 /

8

1 7 /

8

3 5 /

16

2.957 1 7 /

8

1 7 /

8

2 15 /

16

3.056 1 7 /

8

1 7 /

8

2 13 /

16

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

NOM. SIZE

APPROX.

NET WT.

LBS. C

DIMENSIONS

INCHES

F G

3 x 3 x 2 3.145 1 7 /

8

1 7 /

8

2 11 /

16

3 x 3 x 2 1/2 3.034 1 15 /

16

1 15 /

16

2 1 /

2

4

4 x 2 x 4

7.169 2 13 /

32

2 13 /

32

2 17 /

32

7.069

2 3 /

8

3 19 /

32

2 19 /

32

4 x 2 1/2 x 4 6.984

2 3 /

8

3 25 /

32

2 23 /

32

4 x 3 x 2 6.965

2 3 /

8

3 9 /

16

3 25 /

32

4 x 3 x 2 1/2 6.990

2 3 /

8

3 9 /

16

3 29 /

32

4 x 3 x 3

4 x 3 x 4

7.085

2 3 /

8

3 9 /

16

3 1 /

2

6.993

2 3 /

8

3 23 /

32

2 23 /

32

4.328

1 11 /

32

1 11 /

32

3 11 /

32

4.415

1 11 /

32

1 11 /

32

3 5 /

16

4 x 4 x 1/2

4 x 4 x 3/4

4 x 4 x 1 4.414

1 11 /

32

1 11 /

32

3 1 /

8

4 x 4 x 1 1/4 4.730

1 7 /

16

1 7 /

16

3 3 /

32

4 x 4 x 1 1/2 7.144

2 11 /

32

2 11 /

32

3 31 /

32

4 x 4 x 2

4 x 4 x 2 1/2 6.925

2 3 /

8

2 3 /

8

3 29 /

32

4 x 4 x 3

7.094

2 11 /

32

2 11 /

32

3 13 /

16

7.083

2 3 /

8

2 3 /

8

3 1 /

2

PC612

Tee P x P x F – Wrot

NOM. SIZE

APPROX. DIMENSIONS

NET WT. INCHES

LBS. E F G

1/2 .257

1 31 /

32

23 /

32

23 /

32

3/4

3/4 x 3/4 x 1/4

3/4 x 3/4 x 1/2

1 x 1 x 1/2

1 x 1 x 3/4

.258

2 5 /

32

21 /

32

21 /

32

.393 2 1 /

4

21 /

32

21 /

32

.516 2 27 /

32

21 /

32

21 /

32

1 1/4 x 1 1/4 x 1/2 .494 2 13 /

32 5

/

8

5 /

8

1 1/4 x 1 1/4 x 3/4 .679 2 5 /

8

11 /

16

11 /

16

1 1/2 x 1 1/2 x 1/2 .733 2 11 /

16 3

/

8

3 /

8

1 1/2 x 1 1/2 x 3/4 .885 2 7 /

8 19

/

32 19

/

32

2 x 2 x 1/2

2 x 2 x 3/4

.434 2 11 /

32

25 /

32 25

/

32

.385 23 /

32

23 /

32

2 1 /

32

1.699 3

2 1/2 x 2 1/2 x 2 1.925 3 7 /

32

1 9 /

32

3 x 3 x 3/4

3 x 3 x 2

4 x 4 x 3/4

4 x 4 x 2

1.370 3

2 1/2 x 2 1/2 x 3/4 1.049 2

27

3

15

/

1.435 2 3 /

2.097 3 15 /

2.786 3 1 /

/

/

32

16

4

1

32

11 /

32

4

3

11 /

21 /

11 /

3

3.675 4 1 9 /

/

/

4

8

1

16

11 /

16

32

16

32

1 9 /

1

3

11 /

21 /

11 /

9

/

3

/

/

4

8

16

32

16

32

16

32

9

A H E A D O F T H E F L O W ®

UNIONS UNIONS

(Cont.) www.nibco.com

Revised 10/7/2019

ACCESSORIES

(Cont.)

PC633

Union P x P – Wrot

NOM. SIZE

1/2

3/4

1

1 1/4

1 1/2

2

APPROX.

NET WT./LBS.

.383

.527

.804

1.107

1.703

2.368

DIM. A

INCHES

1 5 /

16

1 9 /

32

1 11 /

32

1 19 /

32

1 21 /

32

1 27 /

32

PC634

Tailpiece P x F BSP

NOM. SIZE

1/2 X 1

3/4 X 1

1 X 1

1 X 1 1/4

APPROX.

NET WT./LBS.

0.1840

0.2230

0.2320

0.3530

DIM. A

INCHES

15 /

32

15 /

32

21 /

32

3 /

8

ACCESSORIES

EPDM Seal (leak detection for PC-FP600A-LF ONLY)

SIZE

PART

No.

1/2 T048370 PP PC-FP600A-LF

3/4 T048372 PP PC-FP600A-LF

1 T048374 PP PC-FP600A-LF

1 1/4 T048376 PP PC-FP600A-LF

1 1/2 T048378 PP PC-FP600A-LF

2 T048380 PP PC-FP600A-LF

PC633-3

Union P x F – Wrot

NOM. SIZE

1/2

3/4

1

1 1/4

1 1/2

2

APPROX.

NET WT./LBS.

.374

.527

.841

1.178

1.610

2.445

DIM. A

INCHES

1 7 /

16

1 17 /

32

1 5 /

8

1 15 /

16

1 29 /

32

2 5 /

32

EPDM Seal (leak detection)

SIZE

1/2

3/4

1

1 1/4

1 1/2

2

PART

No.

T048352 PP Leak Detect

T048354 PP Leak Detect

T048356 PP Leak Detect

T048358 PP Leak Detect

T048360 PP Leak Detect

T048362 PP Leak Detect

NOTE: Do NOT use with PC-FP600A-LF

Press Installation Gauge

SIZE

PART

No.

1 1/2 - 2 K700001PC

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25%

PC633-4

Union P x M – Wrot

NOM. SIZE

1/2

3/4

1

1 1/4

1 1/2

2

APPROX.

NET WT./LBS.

.386

.567

.842

1.316

1.756

2.789

DIM. A

INCHES

1 13 /

16

1 29 /

32

2 5 /

32

2 3 /

8

2 13 /

32

2 3 /

4

Large Diameter EPDM Seal

(leak detection)

SIZE

2 1/2

3

4

PART

No.

T048364 PP Leak Detect

T048366 PP Leak Detect

T048368 PP Leak Detect

Visit our website for the most current information.

10

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

Valves

www.nibco.com

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

11

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/24/2020

NIBCO ® Press System Illustrated Valve Index

PC-585HP-LF and PC-585HP-66-LF

Lead-Free Bronze Ball Valve

• Two-piece lead-free ball valve

• Full Port, 250 psi CWP

• Copper press end w/ leak detection

• Reversible handle, triple-sealed stem

• Sizes 1/2” thru 2”

Page 14, 15

PC-585-70 and PC-585-70-66

Bronze Ball Valve

• Press x Press Female End

• Full Port, Blowout-Proof Stem

• Standard Lever Handle

• 250 psi CWP

• Sizes 1/2" thru 2"

Page 18, 19

TPC-585HP-LF

Lead-Free Bronze Ball Valve

• Two-piece lead-free ball valve

• Full Port, 250 psi CWP

• Copper press end x Threaded

• Reversible handle, triple-sealed stem

• Sizes 1/2” thru 2”

Page 16

TPC-585-70 and TPC-585-70-66

Bronze Ball Valve

• Press Female End x NPT

• Full Port, Blowout-Proof Stem

• Standard Lever Handle

• 250 psi CWP

• Sizes 1/2" thru 2"

Page 20, 21

PC-585-80-LF and PC-585-66-LF

Lead-Free Bronze Ball Valve

• Press x Press Female End

• Full Port, Blowout-Proof Stem

• Standard Lever Handle

• 250 psi CWP

• Sizes 1/2" thru 3"

Page 24, 25

PC-585-80-LF-HC and PC-585-66-LF-HC

Lead-Free Bronze Ball Valve

• Press Female End x Hose

• Full Port, Blowout-Proof Stem

• Standard Lever Handle

• 250 psi CWP

• Sizes 1/2" and 3/4"

Page 26, 27

PC-585HP-LF-HC

Lead-Free Bronze Ball Valve

• Two-piece lead-free ball valve

• Full Port, 250 psi CWP

• Copper press end with Hose Cap

• Reversible handle, triple-sealed stem

• Sizes 1/2” thru 2”

Page 17

PC-585-70-HC and PC-585-70-66-HC

Bronze Ball Valve

• Press Female End x Hose

• Full Port, Blowout-Proof Stem

• Standard Lever Handle

• Blow Down, End of Line

• Hose Cap with Chain

• 250 psi CWP

• Sizes 1/2" and 3/4"

Page 22, 23

TPC-585-80-LF and TPC-585-66-LF

Lead-Free Bronze Ball Valve

• Press Female End x NPT

• Full Port, Blowout-Proof Stem

• 250 psi CWP

• Sizes 1/2" thru 2"

Page 28, 29

PC-585-80-LF-SR and PC-585-80-LF-HC-SR

Lead-Free Bronze Ball Valve

• Press x Press

• HC: Press x Hose

• Full Port, Blowout-Proof Stem

• 250 psi CWP

• Sizes 1/2" thru 2"

• HC: Sizes 1/2" and 3/4"

Page 30, 31

PC-FP-600A-LF-W

Lead Free DZR Brass Ball Valve

• Press x Press with Wing Handle

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" - 1"

Page 36

PC-FP-600A-D-LF

Lead Free DZR Brass Ball Valve

• Press x Press with Drain/Bleeder

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" - 1"

Page 39

PC-595-Y/R-LF and PC-595-Y/R-66-LF

Lead-Free Bronze Ball Valve

• Three-piece Body

• Full Port, Blowout-Proof Stem

• Standard and SS Trim

• Press End Leak Detection

• 250 psi CWP

• Sizes 1/2" thru 21/2"

Page 32, 33

PCMT-FP-600A-LF

Lead Free DZR Brass Ball Valve

• Press x MIP

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" - 1"

Page 37

PC-FP-600A-LF-HC

Lead Free DZR Brass Ball Valve

• Press x Hose Cap

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" - 3/4"

Page 40

PC-FP-600A-LF

Lead-Free DZR Brass Ball Valve

• Press x Press Female End

• Full Port, Blowout-Proof Stem

• Press End Leak Detection

• 250 psi CWP

• Sizes 1/2" thru 4"

Page 34, 35

PCT-FP-600A-LF

Lead Free DZR Brass Ball Valve

• Press x FIP

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" - 1"

Page 38

PCPXA-FP-600A-LF

Lead Free DZR Brass Ball Valve

• Press x PEX F1960 Cold Expansion

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" - 2"

Page 41

NOTE: Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the press system.

Visit our website for the most current information.

12

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

NIBCO ® Press System Illustrated Valve Index www.nibco.com

Revised 7/24/2020

PCPX-FP-600A-LF

Lead Free DZR Brass Ball Valve

• Press x PEX F1807 Crimp

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" - 2"

Page 42

PCSU-FP-600A-LF

Lead Free DZR Brass Ball Valve

• Press x Solder Union

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" thru 1"

Page 45

PC-FP485-LF

Lead Free DZR Brass Press Ball & Check Valve

• All-in-one Ball & Check (Press x Press)

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" thru 1 1/2"

Page 48

PF-211-Y

Bronze Globe Valve

• Press x Press Female End

• PTFE Resilient Seat

• 200 psi CWP

• Sizes 1/2" thru 2"

Page 53

PCFU-FP-600A-LF

Lead Free DZR Brass Ball Valve

• Press x FIP Union

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" - 1"

Page 43

PCU-FP600A-LF

Lead Free DXR Brass Press Union Ball Valve

• Press x Press Union

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" thru 1"

Page 46

PF-111 and PC-111-LF

Bronze and Lead-Free Bronze Gate Valve

• Press x Press Female End

• Rising Stem

• Press End Leak Detection

• 250 psi CWP

• Sizes 1/2" thru 2" (PF-113)

• Sizes 1/2" thru 3"

Page 49, 50

PF-311-Y

Bronze Angle Valve

• Press x Press Female End

• PTFE Resilient Seat

• 200 psi CWP

• Sizes 1/2" thru 2"

Page 54

PCMU-FP-600A-LF

Lead Free DZR Brass Ball Valve

• Press x MIP Union

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" thru 1"

Page 44

PC-FP600A-S-LF

Lead Free DZR Brass Press Slip Ball Valve

• Press x Press Slip

• Press End Leak Detection

• Full Port, Blowout-Proof Stem

• 250 psi

• Sizes 1/2" thru 1"

Page 47

PF-113 and PC-113-LF

Bronze and Lead-Free Bronze Gate Valve

• Press x Press Female End

• Non-Rising Stem

• Press End Leak Detection

• 250 psi CWP

• Sizes 1/2" thru 2" (PF-113)

• Sizes 1/2" thru 3" (PC-113-LF)

Page 51, 52

PC-413-Y-LF

Bronze Swing Check Valve

• Lead-Free

• Press x Press Female End

• PTFE Seat

• 200 psi CWP

• Sizes 1/2" thru 2"

Page 55

PF-413-Y

Bronze Swing Check Valve

• Press x Press Female End

• PTFE Seat

• 200 psi CWP

• Sizes 1/2" thru 2"

Page 56

PF-480-Y

Bronze In-Line Check Valve

• Press x Press Female End

• PTFE Seat, Stainless Internals

• 200 psi CWP

• Sizes 1/2" thru 2"

Page 57

PFD-2000 Series

Ductile Iron Butterfly Valve

• Press x Press Female End

• Molded-in Liner

• Aluminum Bronze Disc

• Standard Lever Handle or Gear Operated

• 200 psi CWP

• Sizes 2 1/2" thru 4"

Page 58

PS-585-70

PS-585-70-66

Bronze Ball Valve

• Press x Press Male End

• 2" Type L Copper

• Full Port, Blowout-Proof Stem

• Standard Lever Handle

• 600 psi CWP

• Sizes 1/2" thru 2"

Page 59, 60

PS-585-70-HC

Bronze Ball Valve

• Press Male x Hose End

• 2" Type L Copper

• Full Port, Blowout-Proof Stem

• Standard Lever Handle

• Blown Down, End of Line

• Hose Cap with Chain

• 600 psi CWP

• Sizes 1/2" and 3/4"

Page 61

PF-221/222-A/B

Bronze Y-Strainer

• Press x Press Female End

• Tapped cap w/ blow-off plug or solid cap

• 20 Mesh SS Screen or

SS Perforated Screen

• 200 psi CWP

• Sizes 1/2" thru 2"

Page 62

NOTE: Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the press system.

NOTE: Check valves are down-rated from 250 psi CWP to 200 psi CWP to match the press system.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

13

A H E A D O F T H E F L O W ® www.nibco.com

Revised 1/3/2020

NIBCO ®

585HP Lead-Free Bronze Ball Valve

Features: Silicon Performance Bronze ® Alloy • Laser-Welded Cast Body •

Triple-Sealed Stem • Reversible Handle • Easily Adjustable Packing Nut •

Blowout-Proof Stem • Press Ends Leak Detection

Approvals: MSS-SP110/145 • IAPMO/ANSI Z1157 • NSF/ANSI/CAN 61-8 Commercial Hot 180° F •

NSF/ANSI 372 • ICC-ES PMG-1558 • ASME A112.4.14/CSA B125.14

Size range: 1/2” - 2”

Pressure rating: 250 psi non-shock cold working pressure*

Body design pressure: 1,000 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F*

PATENT US 10,234,043

& PATENT PENDING

1558

Lead-free markings: Double oval in body casting, white handle and blue hang tag

PART

1. Handle Nut

2. Handle Stop

3. Stem

4. Packing

5. Packing Nut

6. Stem O-ring (2)

7. O-ring (2)

8. Boss Seal O-ring (2)

9. Body

10. Seats (2)

11. Ball

12. Body End Piece

13. Press End Adapter (2)

14. Handle

MATERIAL LIST

SPECIFICATION

Carbon Steel, GEOMET ® Coated

ASTM A276 S31600 Stainless Steel

ASTM C69300 Lead-free Silicon Bronze

PTFE

ASTM B16 C36000 Brass

Qmonix ® EPDM

EPDM - Leak Detection

EPDM

ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting

Reinforced PTFE

ASTM B584 C46500 DZR Lead-free Brass (1/2" - 1")

ASTM A276 S31600 or A351 CF8M Stainless Steel (11/4" -2")

ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting

ASTM B75 Alloy C12200 Wrot Copper

Carbon Steel, GEOMET ® Coated, Plastisol Grip

PC-585HP-LF

Press

PC-585HP-66-LF with stainless steel trim also available.

PC-585HP-LF

DIMENSIONS - WEIGHTS

Size A B C D E F G Weights

In.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm. lbs.

kg

  1/2” 5.93 151 4.04 103 2.03

52 2.66

68 0.50

13 3.77

96 2.37

60 0.80 0.36

  3/4” 6.65 169 4.18 106 2.31

59 3.17

81 0.75

19 4.93 125 3.01

76 1.21 0.55

1”     7.35 187 4.75 121 2.74

70 3.78

96 1.00

25 5.19 132 3.42

87 1.58 0.72

11/4” 7.95 202 5.06 129 2.92

74 4.12 105 1.25

32 5.78 147 3.76

96 2.27 1.03

11/2” 10.25 260 6.75 171 3.22

82 4.64 118 1.50

38 7.01 178 4.24 108 3.55 1.61

2”      11.03 280 7.12 181 3.68

93 5.46 139 2.00

51 7.80 198 4.78 121 6.26 2.84

585 HP

Patent US 10,234,043 & Patent Pending

Handle Markings

*NIBCO ® Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 1000 psi CWP to 250 psi CWP to match the Press System.

GEOMET ® is a registered trademark of NOF Metal Coatings, Inc.

QMONIX ® is a trademark of Quadion LLC

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

14

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 1/3/2020

NIBCO ®

585HP Lead-Free Bronze Ball Valve

Features: Silicon Performance Bronze ® Alloy • Laser-Welded Cast Body •

Triple-Sealed Stem • Stainless Trim • Reversible Handle • Easily Adjustable Packing Nut •

Blowout-Proof Stem • Press Ends Leak Detection

Approvals: MSS-SP110/145 • IAPMO/ANSI Z1157 • NSF/ANSI/CAN 61-8 Commercial Hot 180° F •

NSF/ANSI 372 • ICC-ES PMG-1558 • ASME A112.4.14/CSA B125.14

Size range: 1/2” - 2”

Pressure rating: 250 psi non-shock cold working pressure*

Body design pressure: 1,000 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F*

PATENT US 10,234,043

& PATENT PENDING

1558

Lead-free markings: Double oval in body casting, white handle and blue hang tag

PART

1. Handle Nut

2. Handle Stop

3. Stem

4. Packing

5. Packing Nut

6. Stem O-ring (2)

7. O-ring (2)

8. Boss Seal O-ring (2)

9. Body

10. Seats (2)

11. Ball

12. Body End Piece

13. Press End Adapter (2)

14. Handle

MATERIAL LIST

SPECIFICATION

Carbon Steel, GEOMET ® Coated

ASTM A276 S31600 Stainless Steel

ASTM A276 S31600 Stainless Steel

PTFE

ASTM B16 C36000 Brass

Qmonix ® EPDM

EPDM - Leak Detection

EPDM

ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting

Reinforced PTFE

ASTM A276 S31600 or A351 CF8M Stainless Steel

ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting

ASTM B75 Alloy C12200 Wrot Copper

Carbon Steel, GEOMET ® Coated, Plastisol Grip

PC-585HP-66-LF

Press

PC-585HP-66-LF

DIMENSIONS - WEIGHTS

Size A B C D E F G Weights

In.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm. lbs.

kg

  1/2” 5.93 151 4.04 103 2.03

52 2.66

68 0.50

13 3.77

96 2.37

60 0.80 0.36

  3/4” 6.65 169 4.18 106 2.31

59 3.17

81 0.75

19 4.93 125 3.01

76 1.21 0.55

1”     7.35 187 4.75 121 2.74

70 3.78

96 1.00

25 5.19 132 3.42

87 1.58 0.72

11/4” 7.95 202 5.06 129 2.92

74 4.12 105 1.25

32 5.78 147 3.76

96 2.27 1.03

11/2” 10.25 260 6.75 171 3.22

82 4.64 118 1.50

38 7.01 178 4.24 108 3.55 1.61

2”       11.03 280 7.12 181 3.68

93 5.46 139 2.00

51 7.80 198 4.78 121 6.26 2.84

585 HP

Patent US 10,234,043 & Patent Pending

Handle Markings

*NIBCO ® Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 1000 psi CWP to 250 psi CWP to match the Press System.

GEOMET ® is a registered trademark of NOF Metal Coatings, Inc.

QMONIX ® is a trademark of Quadion LLC

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

15

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/23/2020

NIBCO® 585HP Lead-Free Bronze Ball Valves

Features: Silicon Performance Bronze® Alloy • Laser-Welded Cast Body •

Triple-Sealed Stem • Reversible Handle • Easily Adjustable Packing Nut •

Blowout-Proof Stem • Press Ends Leak Detection

Approvals: MSS-SP110/145 • IAPMO/ANSI Z1157 • NSF/ANSI/CAN 61-8 Commercial Hot 180° F •

NSF/ANSI 372 • ICC-ES PMG-1558 • ASME A112.4.14/CSA B125.14

Size range: 1/2” - 2”

Pressure rating: 250 psi non-shock cold working pressure*

Body design pressure: 1,000 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F*

PATENT US 10,234,043

& PATENT PENDING

1558

Lead-free markings: Double oval in body casting, white handle and blue hang tag

PART

1. Handle Nut

2. Handle Stop

3. Stem

4. Packing

5. Packing Nut

6. Stem O-ring (2)

7. O-ring (2)

8. Boss Seal O-ring (2)

9. Body

10. Seats (2)

11. Ball

12. Body End Piece

13. Press End Adapter (2)

14. Handle

MATERIAL LIST

SPECIFICATION

Carbon Steel, GEOMET® Coated

ASTM A276 S31600 Stainless Steel

ASTM C69300 Lead-free Silicon Bronze

ASTM A276 316 Stainless Steel

PTFE

ASTM B16 C36000 Brass

Qmonix® EPDM

EPDM - Leak Detection

EPDM

ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting

Reinforced PTFE

ASTM B584 C46500 DZR Lead-free Brass (1/2" - 1")

ASTM A276 or A351 CF8M Stainless Steel (11/4" -2")

ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting

ASTM B75 Alloy C12200 Wrot Copper

Carbon Steel, GEOMET® Coated, Plastisol Grip

TPC-585HP-LF

Press x Thread

TPC-585HP-66-LF with stainless steel trim also available.

Handle Options:

• NIB-Seal®

• Locking Lever

• Extended Lever w/ Memory Stop

TPC-585HP-LF

DIMENSIONS - WEIGHTS

Size A B C D E F G Weights

In.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm. lbs.

kg

  1/2” 5.11 129.8 4.04 102.6 2.03 51.6 2.65 67.3 0.50 12.7 3.08 78.2 2.39 60.7 0.740 0.336

  3/4” 5.52 140.2 4.18 106.2 2.31 58.7 3.20 81.3 0.75 19.1 3.93 99.8 2.97 75.4 1.293 0.586

1”     6.30 160.0 4.75 120.7 2.74 69.6 3.80 96.5 1.00 25.4 4.27 108.5 3.38 85.9 1.761 0.799

11/4” 6.75 171.5 5.06 128.5 2.92 74.2 4.15 105.4 1.25 31.8 4.71 119.6 3.70 94.0 2.714 1.231

11/2” 8.65 219.7 6.75 171.5 3.22 81.8 4.65 118.1 1.50 38.1 5.53 140.5 4.15 105.4 3.903 1.770

2”      9.29 236.0 7.12 180.8 3.68 93.5 5.45 138.4 2.00 50.8 6.20 157.5 4.69 119.1 5.893 2.673

585 HP

Patent US 10,234,043 & Patent Pending

Handle Markings

*NIBCO® Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 1000 psi CWP to 250 psi CWP to match the Press System.

GEOMET® is a registered trademark of NOF Metal Coatings, Inc.

QMONIX® is a trademark of Quadion LLC

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

16

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/23/2020

NIBCO® 585HP Lead-Free Bronze Ball Valves

Features: Silicon Performance Bronze® Alloy • Laser-Welded Cast Body •

Triple-Sealed Stem • Reversible Handle • Easily Adjustable Packing Nut •

Blowout-Proof Stem • Hose Cap and Chain • Press Ends Leak Detection

Approvals: MSS SP-110/145 • NSF/ANSI 61/372 • IAPMO/ANSI Z1157

Size range: 1/2”, 3/4”

Pressure rating: 250 psi non-shock cold working pressure*

Body design pressure: 1,000 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F*

Lead-free markings: Double oval in body casting, white handle and blue hang tag

PART

1. Handle Nut

2. Handle Stop

3. Stem

4. Packing

5. Packing Nut

6. Stem O-ring (2)

7. Press End Adapter

8. Crimp Evident Seal

9. Press O-ring

10. Seats (2)

11. Ball

12. Body

13. Body End Piece

14. Hose Cap Assembly

15. Handle

MATERIAL LIST

SPECIFICATION

Carbon Steel, GEOMET® Coated

ASTM A276 S31600 Stainless Steel

ASTM C69300 DZR Lead-free Silicon Brass

ASTM A276 316 Stainless Steel

PTFE

ASTM B16 C36000 Brass

Qmonix® EPDM

C12200 Wrought Copper

EPDM

EPDM

Reinforced PTFE

ASTM B584 46500 DZR Lead-free Brass

ASTM A276 or A351 CF8M Stainless Steel

ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting

ASTM B371 C69300 DZR Lead-free Silicon Brass

HPB58-3 Brass

Carbon Steel, GEOMET® Coated, Plastisol Grip

PATENT US 10,234,043

& PATENT PENDING

PC-585HP-LF-HC

Press x Hose Cap

PC-585HP-66-LF-HC with stainless steel trim also available.

PC-585HP-LF-HC

585 HP

Patent US 10,234,043 & Patent Pending

DIMENSIONS - WEIGHTS

Size A B C D E F G Weights

In.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm. lbs.

kg

  1/2” 5.93

150.62

4.04

102.62

2.03 51.56 2.69 68.33 0.50 12.70 3.65 92.71 2.55 64.77 0.780 0.354

  3/4” 6.65

168.91

4.18

106.17

2.31 58.67 3.18 80.77 0.75 19.05 4.26 108.20 2.89 73.41 1.112 0.504

Note: 1. Cap is for hose end thread protection only. Not to be used for pressure containing purposes.

*NIBCO® Press System ball valves are designed to meet MSS SP-110, with the exception of the end connection. Ball valves are downrated from 1000 psi CWP to 250 psi CWP to match the Press System.

GEOMET® is a registered trademark of NOF Metal Coatings, Inc.

QMONIX® is a trademark of Quadion LLC

Handle Markings

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

17

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Ball Valves

Two-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem • Press Ends Leak Detection

250 psi/17.2 bar non-shock cold working pressure

250°F maximum operating temperature

CONFORMS TO MSS SP-110

MATERIAL LIST

PART SPECIFICATION

1. Body

2. Body End

Bronze ASTM B584 Alloy C84400

Bronze ASTM B584 Alloy C84400

3. Press End Adapter (2) Wrot Copper ASTM B75 Alloy C12200

4. Ball Brass ASTM B16 Alloy C36000

5. Seat Ring (2) or ASTM B283 Alloy C37700 (Chrome/Nickel Plated)

Reinforced PTFE

6. Boss seal o-ring (2)

7. O-Ring (2)

8. Packing

9. Pack Gland

10. Stem

11. Handle Nut

12. Thrust Washer

13. Handle Assembly

EPDM

EPDM

PTFE

Brass ASTM B16 Alloy C36000

Silicon Bronze ASTM B371 Alloy C69300 or ASTM B99 Alloy C65100

Zinc Plated Steel

Reinforced PTFE

Zinc Plated Steel Clear Chromate Plastisol Coated

PC-585-70

Press x Press

Female End www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

Handle Options:

• Stainless steel lever

• NIB-SEAL ®

• Locking lever

• Stainless steel locking lever

• Memory stop

• Extended lever w/ memory stop

• Round

• Wing

• Horizontal and vertical chain

PC-585-70

P x P

DIMENSIONS—WEIGHTS

Dimensions

SIZE A B C D E Weight

In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.

Kg.

1/2” 13 2.76 70 1.90 48 6.00 152 .50

13 4.15 105 .80

.36

3/4” 19 3.28 83 2.28 58 7.29 185 .75

19 5.05 128 1.56

.71

1” 25 3.59 91 2.41 61 7.34 186 1.00 25 5.36 136 2.13 1.00

1 1/4 ” 32 4.62 117 3.05 77 10.04 255 1.25 32 6.64 169 3.73 1.69

1 1/2 ” 38 5.23 133 3.30 84 10.72 272 1.50 38 8.00 203 5.53 2.51

2” 50 5.63 143 3.51 89 11.05 281 2.00 50 8.65 220 7.95 3.61

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the

NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

18

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Ball Valves

Two-Piece Body • Full Port • Stainless Trim • Blowout-Proof Stem • Vented Ball •

Press Ends Leak Detection

250 psi/17.2 bar non-shock cold working pressure

250°F maximum operating temperature

CONFORMS TO MSS SP-110

MATERIAL LIST

PART SPECIFICATION

1. Body

2. Body End

Bronze ASTM B584 Alloy C84400

Bronze ASTM B584 Alloy C84400

3. Press End Adapter (2) Wrot Copper ASTM B75 Alloy C12200

4. Ball (vented) Stainless Steel ASTM A276 Type 316 or

5. Seat Ring (2)

ASTM A351 Type CF8M

Reinforced PTFE

6. Boss Seal O-Ring (2) EPDM

7. O-Ring (2) EPDM

8. Packing

9. Pack Gland

10. Stem

PTFE

Brass ASTM B16 Alloy C36000

Stainless Steel ASTM A276 Alloy S31600

11. Handle Nut

12. Thrust Washer

13. Handle Assembly

300 Series Stainless Steel

Reinforced PTFE

Zinc Plated Steel Clear Chromate

Plastisol Coated

PC-585-70-66

Press x Press

Female End www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

Handle Options:

• Stainless steel lever

• NIB-SEAL ®

• Locking lever

• Stainless steel locking lever

• Memory stop

• Extended lever w/ memory stop

• Round

• Wing

• Horizontal and vertical chain

DIMENSIONS—WEIGHTS

SIZE A B

Dimensions

C D E Weight

In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.

Kg.

1/2” 13 2.76 70 1.90 48 6.00 152 .50

13 4.15 105 .77

.35

3/4” 19 3.28 83 2.28 58 7.29 185 .75

19 5.05 128 1.55

.70

1” 25 3.59 91 2.40 61 7.34 186 1.00 25 5.36 136 2.29 1.04

1 1/4 ” 32 4.62 117 3.05 77 10.04 255 1.25 32 6.64 169 3.80 1.72

1 1/2 ” 38 5.23 133 3.30 84 10.72 272 1.50 38 8.00 203 5.60 2.54

2” 50 5.63 143 3.51 89 11.05 281 2.00 50 8.65 220 8.69 3.94

PC-585-70-66

P x P

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the

NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

19

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Ball Valves

Two-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem • Press Ends Leak Detection

250 psi/17.2 bar non-shock cold working pressure

250°F maximum operating temperature

PART

1. Handle Nut

2. Stem

3. Pack Gland

4. Packing, Stem

5. Thrust Washer

6. Handle Assembly

7. Body End

8. Seat Ring (2)

9. Ball

10. Body

11. Boss seal o-ring

12. O-Ring

13. Press End Adapter

CONFORMS TO MSS SP-110

MATERIAL LIST

SPECIFICATION

Zinc Plated Steel

Silicon Bronze ASTM B371 Alloy C69300 or ASTM B371 Alloy C69430

Brass ASTM B16 Alloy C36000

PTFE

Reinforced PTFE

Zinc Plated Steel with Plastisol Coating

Bronze ASTM B584 Alloy C84400

Reinforced PTFE

Brass ASTM B16 Alloy C36000 or ASTM B283 Alloy C37700 (Chrome/Nickel Plated)

Bronze ASTM B584 Alloy C84400

EPDM

EPDM

Wrot Copper ASTM B75 Alloy C12200

TPC-585-70

Thread x Press

Female www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

Handle Options:

• Stainless steel lever

• NIB-SEAL ®

• Locking lever

• Stainless steel locking lever

• Memory stop

• Extended lever w/ memory stop

• Round

• Wing

• Horizontal and vertical chain

DIMENSIONS—WEIGHTS—QUANTITIES

SIZE A B

Dimensions

C D E Weight Master

In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.

Kg. Ctn. Qty.

1/2” 15 3.38 86 3.96 101 1.96 50 0.50 13 1.86 47 0.85 0.39

50

3/4” 20 4.08 104 4.76 121 2.28 58 0.75 19 2.42 61 1.50 0.68

1” 25 4.44 113 4.76 121 2.48 63 1.00 25 2.71 69 2.00 0.91

1 1/4 ” 32 5.46 139 6.75 171 3.09 78 1.25 32 3.67 93 3.55 1.61

1 1/2 ” 40 6.27 159 6.75 171 3.32 84 1.50 38 4.15 105 4.90 2.22

2” 50 6.99 176 6.75 171 3.56 90 2.00 51 4.64 118 6.90 3.13

30

20

12

6

6

TPC-585-70

NPT x P

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the

NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

20

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/25/2018

NIBCO ® Press System Bronze Ball Valves

Two-Piece Body • Full Port • Stainless Trim • Blowout-Proof Stem • Vented Ball •

Press Ends Leak Detection

250 psi/17.2 bar non-shock cold working pressure

250°F maximum operating temperature

CONFORMS TO MSS SP-110

PART

1. Handle Nut

2. Stem

3. Pack Gland

4. Packing, Stem

5. Thrust Washer

6. Handle Assembly

7. Body End

8. Seat Ring (2)

9. Ball (vented)

10. Body

11. Boss seal o-ring

12. O-Ring

13. Press End Adapter

MATERIAL LIST

SPECIFICATION

300 Series Stainless Steel

Stainless Steel ASTM A276 Type 316

Brass ASTM B16 Alloy C36000

PTFE

Reinforced PTFE

Zinc Plated Steel Clear Chromate

Plastisol Coated

Bronze ASTM B584 Alloy C84400

Reinforced PTFE

Stainless Steel ASTM A276 Alloy S31600 or

ASTM A351 Type CF8M

Bronze ASTM B584 Alloy C84400

EPDM

EPDM

Wrot Copper ASTM B75 Alloy C12200

TPC-585-70-66

Thread x Press

Female

Dezincification

Resistant

Handle Options:

• Stainless steel lever

• NIB-SEAL ®

• Locking lever

• Stainless steel locking lever

• Memory stop

• Extended lever w/ memory stop

• Round

• Wing

• Horizontal and vertical chain

DIMENSIONS—WEIGHTS—QUANTITIES

Dimensions

SIZE A B C D E Weight Master

In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.

Kg.

Ctn. Qty.

1/2” 15 3.10 79 3.96 101 1.96 50 0.50 13 1.86 47 0.85 0.39

50

3/4” 20 3.96 101 4.76 121 2.28 58 0.75 19 2.45 62 1.50 0.68

1” 25 4.47 114 4.76 121 2.48 63 1.00 25 2.92 74 2.00 0.91

1 1/4 ” 32 4.99 127 6.75 171 3.09 78 1.25 32 3.30 84 3.55 1.61

1 1/2 ” 40 5.90 150 6.75 171 3.32 84 1.50 38 3.84 98 4.90 2.22

2” 50 6.61 168 6.75 171 3.56 90 2.00 51 4.38 111 6.90 3.13

30

20

12

6

6

TPC-585-70-66

NPT x P

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the

Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

21

A H E A D O F T H E F L O W ® www.nibco.com

Revised 10/15/2019

NIBCO ® Press System Bronze Ball Valves

Two-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem•

3/4" Hose Connection w/Cap and Chain • Press Ends Leak Detection

250 psi/17.2 bar non-shock cold working pressure

250°F maximum operating temperature

PART

1. Press End Adapter

2. Body

3. Hose Body End

4. Cap

5. O-Ring

6. Boss seal o-ring

7. Ball

8. Packing

9. Pack Gland

10. Stem

11. Handle Nut

12. Thrust Washer

13. Handle Assembly

14. Seat Ring (2)

CONFORMS TO MSS SP-110

MATERIAL LIST

SPECIFICATION

Wrot Copper ASTM B75 Alloy C12200

Bronze ASTM B584 Alloy C84400

Brass ASTM B124 Alloy C37700

Die Cast Brass

EPDM

EPDM

Brass ASTM B16 Alloy C36000 or ASTM B283 Alloy C37700 (Chrome/Nickel Plated)

PTFE

Brass ASTM B16 Alloy C36000

Silicon Bronze ASTM B371 Alloy C69300 or ASTM B371 Alloy C69430

Zinc Plated Steel

Reinforced PTFE

Zinc Plated Steel Clear Chromate

Plastisol Coated

Reinforced PTFE

PC-585-70-HC

Press Female x Hose End

Handle Options:

• Stainless steel lever

• NIB-Seal ®

• Locking lever

• Stainless steel locking lever

• Memory stop

• Extended lever w/ memory stop

• Round

• Wing

• Horizontal and vertical chain

SIZE

DIMENSIONS—WEIGHTS

A B

Dimensions

C D Weight

In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.

Kg.

1/2" 13 3.06 78 1.88 48 6.09 155 .50

13 .92

.42

3/4" 19 4.47 114 2.25 57 7.36 187 .75

19 1.70

.77

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi

CWP to 250 psi CWP to match the NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

PC-585-70-HC

P x Hose

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

22

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 10/15/2019

NIBCO ® Press System Bronze Ball Valves

Two-Piece Body • Full Port • Stainless Trim • Blowout-Proof Stem • Vented Ball •

3/4" Hose Connection with Cap and Chain • Press Ends Leak Detection

250 psi/17.2 bar non-shock cold working pressure

250°F maximum operating temperature

PART

1. Press End Adapter

2. Body

3. Hose Body End

4. Cap

5. O-Ring

6. Boss seal o-ring

7. Ball (vented)

8. Packing

9. Pack Gland

10. Stem

11. Handle Nut

12. Thrust Washer

13. Handle Assembly

14. Seat Ring (2)

CONFORMS TO MSS SP-110

MATERIAL LIST

SPECIFICATION

Wrot Copper ASTM B75 Alloy C12200

Bronze ASTM B584 Alloy C84400

Brass ASTM B124 Alloy C37700

Die Cast Brass

EPDM

EPDM

Stainless Steel ASTM A276 Alloy S31600 or ASTM A351 Type CF8M

PTFE

Brass ASTM B16 Alloy C36000

Stainless Steel ASTM A276 Alloy S31600

300 Series Stainless Steel

Reinforced PTFE

Zinc Plated Steel Clear Chromate

Plastisol Coated

Reinforced PTFE

PC-585-70-66-HC

Press Female x Hose End

Handle Options:

• Stainless steel lever

• NIB-Seal ®

• Locking lever

• Stainless steel locking lever

• Memory stop

• Extended lever w/ memory stop

• Round

• Wing

• Horizontal and vertical chain

SIZE

DIMENSIONS—WEIGHTS

A B

Dimensions

C D Weight

In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.

Kg.

1/2" 13 2.76 70 1.88 48 6.09 155 .50

13 .92

.42

3/4" 19 3.28 83 2.25 57 7.36 187 .75

19 1.70

.77

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi

CWP to 250 psi CWP to match the Press System. Male and female press-toconnect ends are new technology not yet covered in the current edition of this specification.

PC-585-70-66-HC

P x Hose

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

23

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press System Lead-Free Bronze Ball Valves

Features: Silicon Performance Bronze ®

Full Port • Blowout-Proof Stem

Two-Piece Body • Press Ends Leak Detection •

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372-8 Commercial Hot 180°F

Size range: 1/2” - 3”

Pressure rating: 250* PSI non-shock cold working pressure

Body design pressure: 600 PSI CWP non-shock cold working pressure

Maximum pressure / temperature: 225 PSI at 250° F*

Lead-free markings: Double oval in body casting, white handle and blue hang tag

MATERIAL LIST

PART SPECIFICATION

1. Handle Nut

2. Stem

3. Pack Gland

4. Packing, Stem

5. Thrust Washer

6. Handle Assembly

7. Body End

8. Seat Ring (2)

9. Ball (vented)

Zinc Plated Steel

Silicon Bronze ASTM B371 Alloy C69300

Brass ASTM B16 Alloy C36000

PTFE

Reinforced PTFE

Zinc Plated Steel Clear Chromate Plastisol Coated

Silicon Bronze ASTM B584 Alloy C87600

Reinforced PTFE

DZR Brass SAE J461 C46500 (1/4"-1")

Stainless Steel ASTM A276 S31600 or ASTM A351 CF8M (11/4"-3")

10. Body Silicon Bronze ASTM B584 Alloy C87600

11. Boss seal o-ring (2) EPDM

12. O-Ring (2) EPDM - Leak Detection

13. Press End Adapter (2) Wrot Copper ASTM B75 Alloy C12200

Dezincification

Resistant

PC-585-80-LF

Press x Press

Female End

PATENT US

10,234,043

Handle Options:

• Stainless Steel Lever

• NIB-Seal®

• NIB-Seal® Locking Lever

• Locking Lever

• Stainless Steel Locking Lever

• Memory Stop

• Extended Lever w/ Memory Stop

• Round

• Wing

• Horizontal and Vertical Chain

Handle Markings

SIZE

DIMENSIONS—WEIGHTS—QUANTITIES

A B C D E Weight

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

Lbs.

1/2 15 3.93

100 3.96

101 1.96

50 0.50

13 2.53

64 0.80

Kg.

0.36

3/4

1

20 5.00

127 4.76

121 2.28

58 0.75

19 3.23

82 1.56

0.71

25 5.61

142 4.76

121 2.48

63 1.00

25 3.84

98 2.13

1.00

11/4 32 6.23

158 6.76

172 3.10

79 1.25

32 4.21 107 3.73

1.69

11/2 40 7.56

192 6.76

172 3.32

84 1.50

38 4.79 122 5.53

2.51

PC-585-80-LF

P x P

2 50 8.40

213 6.76

172 3.56

90 2.00

51 5.36 136 7.95

3.61

21/2 65 9.49

241 8.06

205 4.33

110 2.50

64 6.55 166 16.20

7.35

3 76 10.45 265 8.06

205 4.58

116 2.95

75 7.13 181 16.50

7.48

*200 PSI CWP and 200 PSI at 200°F for 21/2" and above

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 PSI CWP to 250 PSI CWP to match the

Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

LEAD-FREE: Weighted average lead content ≤ 0.25%

24

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press System Lead-Free Bronze Ball Valves

Features: Silicon Performance Bronze ®

Blowout-Proof Stem • Stainless Trim

Two-Piece Body • Copper Ends • Full Port •

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 •

NSF/ANSI 61/372-8 Commercial Hot 180°F

Size range: 1/2” - 3”

Pressure rating: 250* PSI non-shock cold working pressure

Body design pressure: 600 PSI CWP

Maximum pressure / temperature: 225 PSI at 250° F*

Lead-free markings: Double oval in body casting, white handle and blue hang tag

MATERIAL LIST

PART SPECIFICATION

1. Handle Nut

2. Stem

3. Pack Gland

4. Packing, Stem

5. Thrust Washer

6. Handle Assembly

7. Body End

8. Seat Ring (2)

Zinc Plated Steel

Stainless Steel ASTM A276 Type 316

Brass ASTM B16 Alloy C36000

PTFE

Reinforced PTFE

Plated Steel with Plastisol Coating

Silicon Bronze ASTM B584 Alloy C87600

Reinforced PTFE

9. Ball (vented)

10. Body

11. Boss seal o-ring (2)

12. O-Ring (2)

Stainless Steel ASTM A276 Type 316

Silicon Bronze ASTM B584 Alloy C87600

EPDM

EPDM - Leak Detection

13. Press End Adapter (2) Wrot Copper ASTM B75 Alloy C12200

PC-585-66-LF

Press x Press

Female End

Dezincification

Resistant

PATENT US

10,234,043

Handle Options:

• Stainless Steel Lever

• NIB-Seal ®

• NIB-Seal ® Locking Lever

• Locking Lever

• Stainless Steel Locking Lever

• Memory Stop

• Extended Lever w/ Memory Stop

• Round

• Wing

• Horizontal and Vertical Chain

Handle Markings

SIZE

DIMENSIONS—WEIGHTS—QUANTITIES

A B C D E Weight

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

Lbs.

1/2 15 3.93

100 3.96

101 1.96

50 0.50

13 2.53

64 0.80

Kg.

0.36

PC-585-66-LF

P x P

3/4

1

20 5.00

127 4.76

121 2.28

58 0.75

19 3.23

82 1.56

0.71

25 5.61

142 4.76

121 2.48

63 1.00

25 3.84

98 2.13

1.00

1-1/4 32 6.23

158 6.76

172 3.10

79 1.25

32 4.21 107 3.73

1.69

1-1/2 40 7.56

192 6.76

172 3.32

84 1.50

38 4.79 122 5.53

2.51

2 50 8.40

213 6.76

172 3.56

90 2.00

51 5.36 136 7.95

3.61

2-1/2 65 9.49

241 8.06

205 4.33

110 2.50

64 6.55 166 16.20

7.35

3 76 10.45 265 8.06

205 4.58

116 2.95

75 7.13 181 16.50

7.48

*200 PSI CWP and 200 PSI at 200°F for 21/2" and above

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 PSI CWP to 250 PSI CWP to match the Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

25

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press System Lead-Free Bronze Ball Valves

Features: Silicon Performance Bronze ® Alloy • Two-Piece Body • Full Port •

Blowout-Proof Stem • Copper End x 3/4" Hose Connection with Cap and Chain

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372

Size range: 1/2” & 3/4”

Pressure rating: 250 PSI non-shock cold working pressure

Lead-free markings: Double oval in body casting, white handle and blue hang tag

MATERIAL LIST

PART SPECIFICATION

2. Stem

3. Pack Gland

4. Packing

Zinc Plated Steel

Silicon Bronze ASTM B371 Alloy C69300

Brass ASTM B16 Alloy C36000

PTFE

Reinforced PTFE

7. Hose Body End

8. Ball

9. Seat Ring (2)

10. Body

11. Boss seal o-ring

Zinc Plated Steel with Plastisol Coating

Silicon Bronze ASTM B371 Alloy C69300

Silicon Bronze ASTM B283 Alloy C69300

Reinforced PTFE

Silicon Bronze ASTM B584 Alloy C87600

EPDM

12. O-Ring EPDM

13. Press End Adapter Wrot Copper ASTM B75 Alloy C12200

14. Hose Cap Assembly 1 Die Cast Brass, EPDM Gasket, Soft PVC Retainer

1

Cap is for hose end thread protection only. Not to be used for pressure containing purposes.

PC-585-80-LF-HC

Press Female x Hose End

Dezincification

Resistant

Handle Options:

• Stainless Steel Lever

• NIB-Seal ®

• NIB-Seal ® Locking Lever

• Locking Lever

• Stainless Steel Locking Lever

• Memory Stop

• Extended Lever w/ Memory Stop

• Round

• Wing

• Horizontal and Vertical Chain

Handle Markings

SIZE A

DIMENSIONS—WEIGHTS—QUANTITIES

B C D E F G Weight

In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.

1/2 15 3.61 92 3.76 96 1.96 50 0.50 13 5.93 151 1.53 39 0.70 18 12.70 0.42

3/4 20 4.32 110 4.76 121 2.28 58 0.75 19 7.28 185 1.95 50 0.96 24 1.70 0.77

PC-585-80-LF-HC

P x Hose

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

26

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press System Lead-Free Bronze Ball Valves

Features: Silicon Performance Bronze ® Alloy • Two-Piece Body • Full Port • Stainless Trim •

Blowout-Proof Stem • Copper Ends x 3/4" Hose Connection with Cap

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372

Size range: 1/2” & 3/4”

Pressure rating: 250 PSI non-shock cold working pressure

Lead-free markings: Double oval in body casting, white handle and blue hang tag

MATERIAL LIST

PART SPECIFICATION

2. Stem

3. Pack Gland

4. Packing

Zinc Plated Steel

Stainless Steel ASTM A276 Type 316

Brass ASTM B16 Alloy C36000

PTFE

7. Hose Body End

8. Ball (vented)

9. Seat Ring (2)

10. Body

Reinforced PTFE

Zinc Plated Steel with Plastisol Coating

Silicon Bronze ASTM B371 Alloy C69300

Stainless Steel ASTM A276 Type 316

Reinforced PTFE

Silicon Bronze ASTM B584 Alloy C87600

11. Boss seal o-ring EPDM

12. O-Ring EPDM

13. Press End Adapter Wrot Copper ASTM B75 Alloy C12200

14. Hose Cap Assembly1 Die Cast Brass, EPDM Gasket, Soft PVC Retainer

1 Cap is for hose end thread protection only. Not to be used for pressure containing purposes.

Dezincification

Resistant

PC-585-66-LF-HC

Press Female x Hose End

Handle Options:

• Stainless Steel Lever

• NIB-Seal ®

• NIB-Seal® Locking Lever

• Locking Lever

• Stainless Steel Locking Lever

• Memory Stop

• Extended Lever w/ Memory Stop

• Round

• Wing

• Horizontal and Vertical Chain

Handle Markings

SIZE A

DIMENSIONS—WEIGHTS—QUANTITIES

B C D E F G Weight

In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.

1/2 15 3.61 92 3.76 96 1.96 50 0.50 13 5.93 151 1.31 33 0.70 18 0.92 0.42

3/4 20 4.32 110 4.76 121 2.28 58 0.75 19 7.28 185 1.62 41 0.96 24 1.70 0.77

PC-585-66-LF-HC

P x Hose

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

27

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/25/2018

NIBCO ® Press System Lead-Free Bronze Ball Valves

Features: Silicon Performance Bronze ®

Blowout-Proof Stem

Body • Press Ends Leak Detection • Full Port •

Approvals: MSS SP-110 • IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61-8

Commercial Hot 180°F (includes annex F and G) and NSF/ANSI-372

Pressure rating: 250 psi non-shock cold working pressure

Body design pressure: 600 psi non-shock cold working pressure

Maximum pressure / temperature: 200 psi at 250° F

Lead-Free markings: Double oval in body casting, white handle and blue hang tag

Dezincification

Resistant

MATERIAL LIST

PART SPECIFICATION

1. Handle Nut

2. Stem

3. Pack Gland

4. Packing, Stem

Zinc Plated Steel

Silicon Bronze ASTM B371 Alloy C69300

Brass ASTM B16 Alloy C36000

PTFE

5. Thrust Washer Reinforced PTFE

6. Handle Assembly Zinc Plated Steel Clear Chromate Plastisol Coated

7. Body End

8. Seat Ring (2)

9. Ball

Silicon Bronze ASTM B584 Alloy C87600

Reinforced PTFE

Silicon Bronze ASTM B283 Alloy C69300 or SAE J461 C46500 (1/2" - 1")

Silicon Bronze ASTM B283 Alloy C69300 or ASTM A276, Alloy S31600 (1 1/4" - 2")

10. Body

11. Boss seal o-ring

Silicon Bronze ASTM B584 Alloy C87600

EPDM

12. O-Ring EPDM

13. Press End Adapter Wrot Copper ASTM B75 Alloy C12200

TPC-585-80-LF

Thread x Press

Female

Handle Options:

• Stainless steel lever

• NIB-SEAL ®

• Locking lever

• Stainless steel locking lever

• Memory stop

• Extended lever w/ memory stop

• Round

• Wing

• Horizontal and vertical chain

Handle Markings

TPC-585-80-LF

NPT x P

NOM SIZE A B C

DIMENSIONS—WEIGHTS

D E F G J Weight Master

In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.

Kg.

Lbs.

Kg.

Lbs.

Kg. Ctn. Qty.

1/2 15 3.1

79 3.96 101 1.96 50 0.5 13 1.86 47 1.2 30 0.7

18 5.93

151 0.80 0.36

50

3/4 20 3.96 101 4.76 121 2.28 58 0.75 19 2.45 62 1.56 40 0.96

24 7.33

186 1.35 0.61

30

1 25 4.47 114 4.76 121 2.48 63 1 25 2.92 74 1.97 50 0.89

23 7.56

192 1.90 0.86

1-1/4 32 4.99 127 6.76 172 3.1

79 1.25 32 3.3 84 2.31 59 1.01

26 9.86

250 3.20 1.45

1-1/2 40 5.9 150 6.76 172 3.32 84 1.5 38 3.84 98 2.84 72 1.39

35 10.53 267 4.40 2.00

2 50 6.61 168 6.76 172 3.56 90 2 51 4.38 111 3.54 90 1.51

38 10.94 278 6.45 2.93

20

12

6

6

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the

Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

28

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/25/2018

NIBCO ® Press System Lead-Free Bronze Ball Valves

Features: Silicon Performance Bronze ®

Blowout-Proof Stem • Stainless Trim

Body • Copper End • Full Port •

Approvals: MSS SP-145 • IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61-8

Commercial Hot 180°F (includes annex F and G) and NSF/ANSI-372

Pressure rating: 250 psi non-shock cold working pressure

Body design pressure: 600 psi CWP

Maximum pressure / temperature: 200 psi at 250° F

Lead-Free markings: Double oval in body casting, white handle and blue hang tag

Dezincification

Resistant

PART

1. Handle Nut

2. Stem

3. Pack Gland

4. Packing, Stem

5. Thrust Washer

6. Handle Assembly

7. Body End

8. Seat Ring (2)

9. Ball (vented)

10. Body

11. Boss seal o-ring

12. O-Ring

13. Press End Adapter

MATERIAL LIST

SPECIFICATION

Plated Steel

Stainless Steel ASTM A276 Type 316

Brass ASTM B16 Alloy C36000

PTFE

Reinforced PTFE

Plated Steel with Plastisol Coating

Silicon Bronze ASTM B584 Alloy C87600

Reinforced PTFE

Stainless Steel ASTM A276 Type 316

Silicon Bronze ASTM B584 Alloy C87600

EPDM

EPDM

Wrot Copper ASTM B75 Alloy C12200

TPC-585-66-LF

Thread x Press

Female

Handle Options:

• Stainless Steel Lever

• NIB-SEAL ®

• Locking lever

• Stainless Steel Locking Lever

• Memory stop

• Extended lever w/ memory stop

• Round

• Wing

• Horizontal and vertical chain

Handle Markings

TPC-585-66-LF

NPT x P

NOM SIZE A B C

DIMENSIONS—WEIGHTS

D E F G J Weight Master

In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs.

Kg.

Lbs.

Kg.

Lbs.

Kg. Ctn. Qty.

1/2 15 3.1

79 3.96 101 1.96 50 0.5 13 1.86 47 1.2 30 0.7

18 5.93

151 0.80 0.36

50

3/4 20 3.96 101 4.76 121 2.28 58 0.75 19 2.45 62 1.56 40 0.96

24 7.33

186 1.35 0.61

1 25 4.47 114 4.76 121 2.48 63 1 25 2.92 74 1.97 50 0.89

23 7.56

192 1.90 0.86

1-1/4 32 4.99 127 6.76 172 3.1

79 1.25 32 3.3 84 2.31 59 1.01

26 9.86

250 3.20 1.45

1-1/2 40 5.9 150 6.76 172 3.32 84 1.5 38 3.84 98 2.84 72 1.39

35 10.53 267 4.40 2.00

30

20

12

6

2 50 6.61 168 6.76 172 3.56 90 2 51 4.38 111 3.54 90 1.51

38 10.94 278 6.45 2.93

6

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the

Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

29

A H E A D O F T H E F L O W ® www.nibco.com

Revised 4/3/2020

Lead-Free Bronze Ball Valves with Spring Return Handle

Spring Return Handle to Close • Press Ends Leak Detection • Silicon Performance Bronze® Alloy •

Two-Piece Body • Full Port • Blowout-Proof Stem

250 PSI/17 bar non-shock cold working pressure

Lead-free markings: Double oval in body casting, white handle and blue hang tag

Dezincification

Resistant

MSS SP-110/145 • NSF/ANSI/CAN 61-8 COMMERCIAL HOT 180° F • NSF/ANSI 372

PART

MATERIAL LIST

SPECIFICATION

1. Body ASTM B584 C87600 DZR Lead-free Silicon Bronze Casting

2. Body End Piece

3. Seats (2)

ASTM B584 C87600 DZR Lead-free Silicon Bronze Casting

Reinforced PTFE

4. Ball (Vented)

5. Stem

6. Thrust Washer

7. Stem Packing

8. Threaded Pack Gland

9. Handle assembly

10. Lock Washer

11. Handle Nut

ASTM B584 C46500 DZR Lead-free Brass (1/2" - 1")

ASTM A276 S31600 or A351 CF8M Stainless Steel (11/4" -2")

ASTM C69300 Lead-free Silicon Bronze

Reinforced PTFE

Virgin PTFE

Brass ASTM B16 Alloy C36000

Stainless Steel Type 316 and 304 with Vinyl Cover

Stainless Steel

Stainless Steel

12. Mounting Plate Stainless Steel ASTM A351 Type CF8M

13. Socket Head Cap Screw (2) Stainless Steel Type 304

14. Hex Shoulder Bolt

15. Press End Adapter (2)

16. Boss Seal (2)

17. Press End Seal (2)

Stainless Steel

ASTM B75 Alloy C12200 Wrot Copper

EPDM

EPDM (Leak Detection)

L

PC-585-80-LF-SR

Press x Press

LB

LA

Carbon Steel and Stainless Steel

Ball Valve options available.

See Ball Valve Catalog.

H

D B

PC-585-80-LF-SR

Press x Press

A

Size

DIMENSIONS—WEIGHTS

Dimensions

A B C H L LA LB

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm. Lbs. Kg

1/2

3/4

1

12.70

3.95

100 1.57

40 0.50

13 1.73

44 7.11

181 4.84

123 5.79

147 1.43

0.65

19.05

5.10

130 2.00

51 0.75

19 2.01

51 7.28

185 4.92

125 6.04

153 2.16

0.98

25.40

5.56

141 1.97

50 1.00

25 2.22

56 7.28

185 4.92

125 6.04

153 2.76

1.25

1 1/4 31.75

6.23

158 2.31

59 1.25

32 2.69

68 9.51

242 6.50

165 7.62

194 4.43

2.01

1 1/2 38.10

7.55

192 2.84

72 1.50

38 2.91

74 9.51

242 6.50

165 7.62

194 5.33

2.42

2 50.80

8.38

213 3.54

90 2.00

51 3.15

80 9.51

242 6.50

165 7.62

194 7.63

3.46

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 PSI CWP to 250

PSI CWP to match the Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

LEAD-FREE: Weighted average lead content ≤ 0.25%

30

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 4/3/2020

Lead-Free Bronze Ball Valves with Spring Return Handle

Spring Return Handle to Close • Press End Leak Detection • 3/4” Hose Connection w/ Cap •

Silicon Performance Bronze® Alloy • Two-Piece Body • Full Port • Blowout-Proof Stem

250 PSI/17 bar non-shock cold working pressure

Lead-free markings: Double oval in body casting, white handle and blue hang tag

Dezincification

Resistant

MSS SP-110/145 • NSF/ANSI/CAN 61-8 COMMERCIAL HOT 180° F • NSF/ANSI 372

PART

MATERIAL LIST

SPECIFICATION

1. Body ASTM B584 C87600 DZR Lead-free Silicon Bronze Casting

2. Body End Piece

3. Seats (2)

4. Ball (Vented)

5. Stem

6. Thrust Washer

ASTM B371 C69300

Reinforced PTFE

ASTM B584 C46500 DZR Lead-free Brass

ASTM C69300 Lead-free Silicon Bronze

Reinforced PTFE

7. Stem Packing

8. Threaded Pack Gland

9. Handle assembly

10. Lock Washer

Virgin PTFE

Brass ASTM B16 Alloy C36000

Stainless Steel Type 316 and 304 with Vinyl Cover

Stainless Steel

11. Handle Nut

12. Mounting Plate

Stainless Steel

Stainless Steel ASTM A351 Type CF8M

13. Socket Head Cap Screw (2) Stainless Steel Type 304

14. Hex Shoulder Bolt Stainless Steel

15. Press End Adapter

16. Boss Seal

17. Press End Seal

18. Hose cap Assembly

ASTM B75 Alloy C12200 Wrot Copper

EPDM

EPDM (Leak Detection)

Die Cast Brass, EPDM Gasket, Soft PVC Retainer

PC-585-80-LF-HC-SR

Press x Hose

LB

LA

L

Carbon Steel and Stainless Steel

Ball Valve options available.

See Ball Valve Catalog.

H

D B

PC-585-80-LF-HC-SR

Press x Hose

A

DIMENSIONS—WEIGHTS

Dimensions

1/2

Size A B C H L LA LB

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm. Lbs. Kg

12.70

3.82

97 1.57

40 0.50

13 1.73

44 7.11

181 4.84

123 5.79

147 1.38

0.63

3/4 19.05

4.50

114 2.00

51 0.75

19 2.90

74 7.28

185 4.92

125 6.04

153 2.11

0.96

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from

600 PSI CWP to 250 PSI CWP to match the Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25%

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

31

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press Lead-Free Three Piece Bronze Ball Valves

Features: Silicon Performance Bronze ®

Full Port • Blowout-Proof Stem

Alloy • Three-Piece Body • Press Ends Leak Detection •

Approvals: MSS SP-110/145 • Truesdail NSF/ANSI/CAN

61-2018 Commercial Hot 180°F, NSF/ANSI 372

Dezincification

Resistant

NSF/ANSI/CAN

61-2018 Size range: 1/2” - 2-1/2”

Pressure rating: 250 psi non-shock cold working pressure*

Maximum pressure / temperature: 225 psi at 250° F*

Lead-free markings: Double oval in body casting, white handle and blue hang tag

PART

1. Body Nuts

2. Handle Nut

3. Threaded Pack Gland

4. Body

5. Body End (2)

6. Handle

7. Ball

8. Seats (2)

9. Body Bolts

10. O-ring (2)

11. Grounding Washer

12. Thrust Washer

13. Stem Packing

14. Stem

15. Press End Adapter (2)

16. O-Ring (2)

17. Boss Seal O-ring (2)

MATERIAL LIST

SPECIFICATION

Zinc Dichromate Plated Steel

ASTM A449 Grade 5

Zinc Plated Steel

Brass ASTM B16 Alloy C36000

Silicon Bronze ASTM B584 Alloy C87850

Silicon Bronze ASTM B584 Alloy C87850

Steel, Plated Plastisol Coated

DZR Brass SAE J461 C46500 (1/4”-1”)

Stainless Steel ASTM A276 S31600 or ASTM A351

CF8M (11/4”-21/2”)

PTFE “Y” or RPTFE “R” Glass Reinforced

Zinc Dichromate Plated Steel

ASTM A449 Grade 5

FKM

Stainless Steel- ASTM A-167 304

Reinforced PTFE

PTFE

Silicon Bronze ASTM B371 Alloy C69300

Wrot Copper ASTM B75 Alloy C12200

EPDM (Leak Detection)

EPDM

PC-595-Y-LF

PC-595-R-LF

Press

Handle Markings

DIMENSIONS - WEIGHTS - QUANTITIES

Size A B

In.

In.

  1/2” 2.482

  3/4” 3.048

1”     3.505

11/4” 3.758

mm.

63

77

89

95

In.

1.794

1.991

2.484

2.718

mm.

46

51

63

69

In.

0.629

0.881

1.132

1.382

11/2” 4.24

108 3.045

77 1.633

2”       6.404

163 4.042

103 2.134

21/2” 7.071

180 5.09

129 2.631

C mm.

16

22

29

35

41

54

67

D

In.

1.942

2.277

2.469

3.092

3.335

3.556

85

90

4.322

110 mm.

49

58

63

79

E

In.

3.96

mm.

In.

101 0.968

4.762

121 1.281

4.762

121 1.643

6.75

171 1.83

6.75

6.75

8.06

171 2.205

171 2.72

205 3.513

*200 PSI CWP and 200 PSI at 200°F for 21/2” and above

F Weights mm.

lbs.

25 1.14

kg

0.52

33

42

46

1.91

0.87

2.84

1.29

4.36

1.98

56

69

89

5.73

2.60

11.12

5.04

18.79

8.52

Master

Ctn. Qty.

8

4

2

40

25

15

10

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

32

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press Lead-Free Three Piece Bronze Ball Valves

Features: Silicon Performance Bronze ® Alloy • Three-Piece Body • Press Ends Leak Detection •

Stainless Steel Trim• Full Port • Blowout-Proof Stem

Approvals: MSS SP-110/145 • Truesdail NSF/ANSI/CAN

61-2018 Commercial Hot 180°F, NSF/ANSI 372

Dezincification

Resistant

NSF/ANSI/CAN

61-2018 Size range: 1/2” - 2-1/2”

Pressure rating: 250 psi non-shock cold working pressure*

Maximum pressure / temperature: 225 psi at 250° F*

Lead-free markings: Double oval in body casting, white handle and blue hang tag

PART

1. Body Nuts

2. Handle Nut

3. Threaded Pack Gland

4. Body

5. Body End (2)

6. Handle

7. Ball

8. Seats (2)

9. Body Bolts

10. O-ring (2)

11. Grounding Washer

12. Thrust Washer

13. Stem Packing

14. Stem

15. Press End Adapter (2)

16. O-Ring (2)

17. Boss Seal O-ring (2)

MATERIAL LIST

SPECIFICATION

Zinc Dichromate Plated Steel

ASTM A449 Grade 5

Zinc Plated Steel

Brass ASTM B16 Alloy C36000

Silicon Bronze ASTM B584 Alloy C87850

Silicon Bronze ASTM B584 Alloy C87850

Steel, Plated Plastisol Coated

Stainless Steel ASTM A276 Type S31600

PTFE “Y” or RPTFE “R” Glass Reinforced

Zinc Dichromate Plated Steel

ASTM A449 Grade 5

FKM

Stainless Steel- ASTM A-167 304

Reinforced PTFE

PTFE

Stainless Steel ASTM A276 Type 316

Wrot Copper ASTM B75 Alloy C12200

EPDM (Leak Detection)

EPDM

PC-595-Y-66-LF

PC-595-R-66-LF

Press

Handle Markings

DIMENSIONS - WEIGHTS - QUANTITIES

Size A B

In.

In.

  1/2” 2.482

  3/4” 3.048

1”     3.505

11/4” 3.758

mm.

63

77

89

95

In.

1.794

1.991

2.484

2.718

mm.

46

51

63

69

In.

0.629

0.881

1.132

1.382

11/2” 4.24

108 3.045

77 1.633

2”       6.404

163 4.042

103 2.134

21/2” 7.071

180 5.09

129 2.631

C mm.

16

22

29

35

41

54

67

D

In.

1.942

2.277

2.469

3.092

3.335

3.556

85

90

4.322

110 mm.

49

58

63

79

E

In.

3.96

mm.

In.

101 0.968

4.762

121 1.281

4.762

121 1.643

6.75

171 1.83

6.75

6.75

8.06

171 2.205

171 2.72

205 3.513

F

*200 PSI CWP and 200 PSI at 200°F for 21/2” and above

Weights mm.

lbs.

25 1.14

kg

0.52

33

42

46

1.91

0.87

2.84

1.29

4.36

1.98

56

69

89

5.73

2.60

11.12

5.04

18.79

8.52

Master

Ctn. Qty.

8

4

2

40

25

15

10

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25%

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

33

www.nibco.com

Revised 7/25/2018 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press Ends Leak Detection • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†

Size range: 1/2” - 2”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

2 limited warranty

Lead-Free markings: White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and

Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PART

1. Body

2. Seat Seal

3. O-ring

4. Washer

5. Lock Nut

6. Handle

7. Stem

8. Ball

9. End Cap

10. O-ring

11. Metal Ring

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel + Nylon

Steel, Plated

Brass

Chrome Plated Brass - C46500 (1/2"-1")

Stainless Steel 316 (11/4"-2")

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000

Stainless Steel (1-1/4"-2") ‡

PC-FP-600A-LF

Press x Press

1/2" - 2"

(Patent Pending sizes 1-1/4" - 2")

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

Handle Markings

PC-FP-600A-LF

Press x Press

1/2" - 2" ‡

SIZE

In.

1/2

3/4

1

1-1/4 ‡

1-1/2 ‡

2 ‡

In.

4.57

5.71

5.83

6.97

9.06

9.88

A mm.

116

145

148

177

230

251

In.

3.66

4.17

4.17

4.61

6.30

6.30

B

106

106

117

160

160 mm.

93

DIMENSIONS—WEIGHTS—QUANTITIES

C D E

In.

2.09

mm.

53

In.

mm.

0.631

16.03

In.

1.30

mm.

33.0

2.80

3.15

2.52

3.23

3.23

71

80

64

82

82

0.883

22.43

1.140

28.96

1.386

35.20

1.636

41.56

2.137

54.28

1.63

1.83

2.19

2.52

3.39

41.5

46.5

55.5

64.0

86.0

In.

2.87

3.44

3.64

4.43

5.30

6.69

F mm.

73.0

87.5

92.5

112.5

134.5

170.0

Lbs.

0.38

Weight

Kg.

0.17

0.73

1.00

1.70

2.37

3.96

0.33

0.46

0.77

1.08

1.80

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

4. Bending Test

5. Vacuum Test

6. Hydraulic Shock (Water Hammer) Test

7. Vibration Test

8. Thermal Cycling Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

†Tested to the performance criteria of ASME B16.51

‡ Patent Pending

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

LEAD-FREE: Weighted average lead content ≤ 0.25%

34

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

www.nibco.com

Revised 7/25/2018 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press Ends Leak Detection • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†

Size range: 2 1/2” - 4”

Pressure rating: 200 psi non-shock cold working pressure

Maximum pressure / temperature: 200 psi at 200° F

Lead-Free markings: White handle and blue hang tag

Dezincification

Resistant

2 limited warranty

Applications: Drinking Water • Domestic Hot & Cold Water • HVAC

(condensors, chilled water, hot water heating) • Isolation and Throttling

(half-open to full-open only) • Connect to Rigid Copper Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and Jaw

Compatibility Matrix list.

Not intended for steam or gas usage.

MATERIAL LIST

PART SPECIFICATION

1

PVC

3 Handle Lock Nut Steel

Brass/Bronze

5 Brass/Bronze

6 PTFE

7 Leak Detection O-ring

8 O-ring, Boss Seal

EPDM - ASTM D2000

EPDM - ASTM D2000

PC-FP-600A-LF

Press x Press

2 1/2" - 4"

12 Ball Seat Seal

Brass/Bronze

13 Press End Adaptor w/Leak Detection

PTFE

ASTM B75 Alloy C12200

Options:

• Extended lever

• EPDM Seal for Press Ends Handle Markings

2

PC-FP-600A-LF

Press x Press

2 1/2" - 4"

In.

2 1/2"

3

4

SIZE mm.

15

20

25

In.

13.07

13.67

15.87

A mm.

332

347.2

403.1

In.

8.66

8.66

9.61

B

DIMENSIONS—WEIGHTS—QUANTITIES mm.

220

220

244.1

In.

4.8

5.12

5.98

C mm.

121.9

130

151.9

IAPMO/ANSI Z1157: i n addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

In.

2.52

2.91

3.9

D mm.

64

73.9

99

In.

5.88

6.71

8.21

E mm.

149.3

170.4

208.5

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

4. Bending Test

5. Vacuum Test

6. Hydraulic Shock (Water Hammer) Test

7. Vibration Test

8. Thermal Cycling Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

In.

8.81

10.03

12.53

F mm.

223.7

261.6

318.2

Lbs.

9.55

13.07

26.32

Weight

Kg.

4.33

5.93

11.94

†Tested to the performance criteria of ASME B16.51

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

35

www.nibco.com

Revised 7/25/2018 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press Ends Leak Detection • Wing Handle • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†

Size range: 1/2” - 1”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

2 limited warranty

Lead-Free markings: White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and

Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PC-FP-600A-LF-W

Press x Press

1/2" - 1"

PART

1. Body

2. Seat Seal

3. O-ring

4. Washer

5. Lock Nut

6. Handle

7. Stem

8. Ball

9. End Cap

10. O-ring

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel + Nylon

Steel, Plated

Brass

Chrome Plated Brass - C46500

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000

Options:

• Extended lever

• EPDM Seal for Press Ends

• Lever Handle

In.

1/2

3/4

1

Size mm.

12.7

19.05

25.40

A

In.

3.11

mm.

79.00

4.25

108.00

4.25

108.00

Handle Markings

PC-FP-600A-LF-W

Press x Press

1/2" - 1"

DIMENSIONS—WEIGHTS—QUANTITIES

B C D

In.

1.45

2.15

2.31

mm.

36.80

54.70

58.70

In.

0.59

0.79

0.98

mm.

15.00

20.00

25.00

In.

1.39

1.70

1.90

mm.

35.20

43.20

48.20

In.

2.96

3.51

3.71

E mm.

75.20

89.20

94.20

Lbs.

0.4230

0.8020

1.0930

Weight

Kg.

0.1918

0.3637

0.4957

†Tested to the performance criteria of ASME B16.51

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

7. Vibration Test

8. Thermal Cycling Test

4. Bending Test

5. Vacuum Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

36

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

www.nibco.com

Revised 7/25/2018 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press End Leak Detection • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†

Size range: 1/2” - 1”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

2 limited warranty

Lead-Free markings: White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and

Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PART

1. Body

2. Seat Seal

3. O-ring

4. Washer

5. Lock Nut

6. Handle

7. Stem

8. Ball

9. End Cap

10. O-ring

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel + Nylon

Steel, Plated

Brass

Chrome Plated Brass - C46500 (1/2"-1")

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000

PCMT-FP-600A-LF

Press x MIP

1/2" - 1"

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

Handle Markings

PCMT-FP-600A-LF

Press x Male

1/2" - 1"

In.

1/2

3/4

1

SIZE mm.

12.7

19.05

25.40

In.

5.30

6.07

6.29

A mm.

134.70

154.20

159.70

In.

3.62

DIMENSIONS—WEIGHTS—QUANTITIES

B C D E mm.

92.00

In.

1.34

mm.

34.00

In.

0.59

mm.

15.00

In.

1.60

mm.

In.

40.70

3.00

4.13

105.00

4.13

105.00

2.06

2.21

52.20

56.20

0.79

0.98

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

7. Vibration Test

8. Thermal Cycling Test

4. Bending Test

5. Vacuum Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

20.00

25.00

2.00

2.23

50.70

3.53

56.70

3.89

F mm.

76.20

89.70

98.70

Lbs.

0.4520

Weight

Kg.

0.2050

0.7940

1.1730

0.3601

0.5320

†Tested to the performance criteria of ASME B16.51

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

37

www.nibco.com

Revised 7/25/2018 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press End Leak Detection • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†

Size range: 1/2” - 1”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

2 limited warranty

Lead-Free markings: White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and

Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PCT-FP-600A-LF

Press x FIP

1/2" - 1"

PART

1. Body

2. Seat Seal

3. O-ring

4. Washer

5. Lock Nut

6. Handle

7. Stem

8. Ball

9. End Cap

10. O-ring

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel + Nylon

Steel, Plated

Brass

Chrome Plated Brass - C46500

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

Handle Markings PCT-FP-600A-LF

Press x FIP

1/2" - 1"

In.

1/2

3/4

1

SIZE mm.

12.7

19.05

25.40

In.

4.75

5.42

5.64

A mm.

120.70

137.70

143.20

In.

3.62

DIMENSIONS—WEIGHTS—QUANTITIES

B C D E mm.

92.00

In.

1.34

mm.

34.00

In.

0.59

mm.

15.00

In.

1.09

mm.

In.

27.70

2.45

4.13

105.00

4.13

105.00

2.06

2.21

52.20

56.20

0.79

0.98

20.00

25.00

1.37

1.62

34.70

2.88

41.20

3.24

F mm.

62.20

73.20

82.20

Lbs.

0.3950

Weight

0.7280

1.0520

Kg.

0.1791

0.3302

0.4771

†Tested to the performance criteria of ASME B16.51

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

7. Vibration Test

8. Thermal Cycling Test

4. Bending Test

5. Vacuum Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

38

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

www.nibco.com

Revised 7/25/2018 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press End Leak Detection • Side Drain/Bleeder • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†

Size range: 1/2” - 1”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

2 limited warranty

Lead-Free markings: White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and

Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PC-FP-600A-D-LF

Press x Press with Drain/Bleeder

1/2" - 1" PART

1. Body

2. Seat Seal

3. O-ring

4. Washer

5. Lock Nut

6. Handle

7. Stem

8. Ball

9. End Cap

10. O-ring

11. Washer

12. Nut

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel + Nylon

Steel, Plated

Brass

Chrome Plated Brass - C46500

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000

EPDM

Brass

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

Handle Markings

PC-FP-600A-D-LF

Press x Press with Drain/Bleeder

1/2" - 1"

In.

SIZE mm.

In.

A mm.

In.

B mm.

DIMENSIONS—WEIGHTS—QUANTITIES

In.

C mm.

In.

D mm.

In.

E mm.

In.

F mm.

In.

G mm.

In.

H mm.

Weight

Lbs.

Kg.

1/2 12.7

5.26

133.70

3.62

92.00

1.34

34.00

0.59

15.00

2.15

54.70

3.73

94.70

2.09

53.00

1.44

36.50 0.5220 0.2368

3/4 19.05

6.05

153.70

4.13

105.00

2.06

52.20

0.79

20.00

2.43

61.70

4.24

107.70

2.32

59.00

1.44

36.50 0.8800 0.3991

1 25.40

6.11

155.20

4.13

105.00

2.21

56.20

0.98

25.00

2.61

66.20

4.42

112.20

2.44

62.00

1.59

40.50 1.2610 0.5719

†Tested to the performance criteria of ASME B16.51

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

7. Vibration Test

8. Thermal Cycling Test

4. Bending Test

5. Vacuum Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

39

www.nibco.com

Revised 7/25/2018 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press End Leak Detection • 3/4" Hose Connection w/Cap • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†

Size range: 1/2” - 3/4”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

2 limited warranty

Lead-Free markings:

White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and

Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PART

1. Body

2. Seat Seal

3. O-ring

4. Washer

5. Lock Nut

6. Handle

7. Stem

8. Ball

9. End Cap

10. O-ring

11. Washer

12. Nut

13. Cap Retainer

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel + Nylon

Steel, Plated

Brass

Chrome Plated Brass - C46500

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000

EPDM

Brass

NBR

PC-FP-600A-LF-HC

Press x Hose Cap

1/2" - 3/4"

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

Handle Markings

PC-FP-600A-LF-HC

Press x Hose Cap

1/2" - 3/4"

In.

1/2

3/4

SIZE mm.

12.7

19.05

In.

4.51

5.10

A mm.

114.50

129.50

In.

3.62

DIMENSIONS—WEIGHTS—QUANTITIES

B C D E mm.

92.00

In.

1.34

mm.

34.00

In.

0.59

mm.

15.00

In.

1.46

4.13

105.00

2.06

52.20

0.79

20.00

1.74

mm.

In.

37.20

3.11

44.20

3.52

F mm.

79.00

89.50

Lbs.

0.5220

0.8090

Weight

Kg.

0.2368

0.3669

†Tested to the performance criteria of ASME B16.51

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

7. Vibration Test

8. Thermal Cycling Test

4. Bending Test

5. Vacuum Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

40

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

www.nibco.com

Revised 6/26/2019 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press End Leak Detection • PEX end F1960 Cold Expansion • Two-Piece Body • PTFE Seats •

Blowout-Proof Stem • Double Stem Seal

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 14 61/372 • Conforms to ASME B16.51†

Size range: 1/2” - 2”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F

Lead-free markings: White handle and blue hang tag

NSF/ANSI-14 61 & 372

IAPMO/ANSI Z1157

Applications: Drinking Water • Domestic Hot & Cold Water • HVAC (condensors, chilled water, hot water heating) • Isolation and Throttling (half-open to full-open only) •

Connect to Rigid Copper Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Dezincification

Resistant

Reference Press System catalog for updated Approved Tool and Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

MATERIAL LIST

PART SPECIFICATION

1. Body Forged DZR Copper Alloy - C46500

2. Seat Seal (2) PTFE

3. O-ring

4. Packing

EPDM - ASTM D2000

PTFE

5. Washer

6. Lock Nut

7. Handle

Stainless Steel ASTM 321

Stainless Steel 304

Steel, Plated

8. Nut

9. Stem

10. Ball

11. End Cap

12. O-ring

13. Metal Ring

Brass

Brass

Chrome Plated Brass - C46500 (1/2"-1")

Stainless Steel 316 (11/4"-2")

Forged DZR Copper Alloy - C46500 (F1960 Cold Expansion)

EPDM - ASTM D2000 (Leak Detect)

Stainless Steel (11/4"-2") ††

PCPXA-FP-600A-LF

Press x PEX (F1960 - Cold Expansion)

1/2" - 2"

Patent Pending sizes 11/4" - 2"

2 limited warranty

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

SIZE

In.

1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

A

In.

mm.

5.15

130.90

5.48

139.20

6.37

161.70

7.09

180.00

8.31

211.00

10.19

258.80

B

In.

3.62

3.62

92.00

4.13

105.00

4.37

111.00

5.04

128.00

6.22

158.00

Handle Markings

DIMENSIONS—WEIGHTS—QUANTITIES mm.

92.00

In.

1.20

C mm.

30.55

In.

0.39

D mm.

10.00

In.

1.30

E F mm.

In.

mm.

32.90

2.79

70.90

PCPXA-FP-600A-LF

Press x PEX (F1960 - Cold Expansion)

1/2" - 2" ††

Lbs.

0.3400

Weight

Kg.

0.1542

1.34

2.06

2.58

2.70

3.16

34.00

52.20

65.5

68.5

80.2

0.60

0.79

0.98

1.09

1.57

15.30

20.00

25.00

27.80

40.00

1.48

1.74

2.19

2.63

3.12

37.70

3.33

84.70

44.20

3.83

97.20

0.5090

0.8620

55.50

4.75

120.70

1.5400

66.85

5.72

145.40

2.3300

79.20

6.92

175.70

3.6600

0.2308

0.3909

0.6900

1.0600

1.6600

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

† Tested to the performance criteria of ASME B16.51

†† Patent Pending

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

4. Bending Test

5. Vacuum Test

6. Hydraulic Shock (Water Hammer) Test

7. Vibration Test

8. Thermal Cycling Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25%

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

41

www.nibco.com

Revised 6/26/2019 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press End Leak Detection • PEX End F1807 Crimp • Two-Piece Body • PTFE Seats • Blowout-Proof Stem •

Double Stem Seal

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 14 61/372 • Conforms to ASME B16.51†

Size range: 1/2” - 2”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F

Lead-free markings: White handle and blue hang tag

NSF/ANSI-14 61 & 372

IAPMO/ANSI Z1157

Applications: Drinking Water • Domestic Hot & Cold Water • HVAC (condensors, chilled water, hot water heating) • Isolation and Throttling (half-open to full-open only) •

Connect to Rigid Copper Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Dezincification

Resistant

2 limited warranty

Reference Press System catalog for updated Approved Tool and Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

MATERIAL LIST

PART

1. Body

2. Seat Seal (2)

3. O-ring

4. Packing

5. Washer

6. Lock Nut

7. Handle

8. Nut

9. Stem

10. Ball

11. End Cap

12. O-ring

13. Metal Ring

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel ASTM 321

Stainless Steel 304

Steel, Plated

Brass

Brass

Chrome Plated Brass - C46500 (1/2"-1")

Stainless Steel 316 (11/4"-2")

Forged DZR Copper Alloy - C46500 (F1807 Crimp)

EPDM - ASTM D2000 (Leak Detect)

Stainless Steel (11/4"-2") ††

PCPX-FP-600A-LF

Press x PEX (F1807 - Crimp)

1/2" - 2"

Patent Pending sizes 1-1/4" - 2"

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

Handle Markings

PCPX-FP-600A-LF

Press x PEX (F1807 - Crimp)

1/2" - 2" ††

SIZE

In.

1/2"

A

In.

mm.

5.11

129.90

In.

3.62

B

DIMENSIONS—WEIGHTS—QUANTITIES mm.

92.00

In.

1.20

C mm.

30.55

In.

0.39

D mm.

10.00

In.

1.30

E F mm.

In.

mm.

32.90

2.75

69.90

Lbs.

0.3280

Weight

Kg.

0.1487

3/4"

1"

1 1/4"

1 1/2"

5.19

5.97

6.61

7.76

131.70

151.70

168.00

197.00

3.62

4.13

4.37

5.04

92.00

105.00

111.00

128.00

1.34

2.06

2.58

2.70

34.00

52.20

65.50

68.50

0.60

0.80

0.87

1.03

15.30

20.30

22.20

26.10

1.50

1.72

2.21

2.63

38.20

43.70

56.20

66.75

3.04

3.43

4.28

5.17

77.20

87.20

108.70

131.40

0.4810

0.7850

1.4400

2.1900

0.2181

0.3560

0.6500

0.9900

2" 9.51

241.50

6.22

158.00

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

3.16

80.20

1.37

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

4. Bending Test

5. Vacuum Test

6. Hydraulic Shock (Water Hammer) Test

34.70

3.09

78.60

6.25

158.70

3.3600

7. Vibration Test

8. Thermal Cycling Test

1.5200

† Tested to the performance criteria of ASME B16.51

†† Patent Pending

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

LEAD-FREE: Weighted average lead content ≤ 0.25%

42

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

www.nibco.com

Revised 7/25/2018 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press End Leak Detection • FIP Union • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†

Size range: 1/2” - 1”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

2 limited warranty

Lead-Free markings: White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and

Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PART

1. Body

2. Seat Seal

3. O-ring

4. Washer

5. Lock Nut

6. Handle

7. Stem

8. Ball

9. End Cap

10. O-ring

11. Fitting

12. Washer

13. Nut

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel + Nylon

Steel, Plated

Brass

Chrome Plated Brass - C46500

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000

Forged DZR Copper Alloy - C46500

EPDM

Brass

PCFU-FP-600A-LF

Press x FIP Union

1/2" - 1"

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle Handle Markings

PCFU-FP-600A-LF

Press x FIP Union

1/2" - 1"

In.

1/2

3/4

1

SIZE mm.

12.7

19.05

25.40

A

In.

mm.

6.23

158.20

6.92

175.70

7.17

182.20

In.

3.62

DIMENSIONS—WEIGHTS—QUANTITIES

B C D E mm.

92.00

In.

1.34

mm.

34.00

In.

0.59

mm.

15.00

In.

2.57

4.13

105.00

4.13

105.00

2.06

2.21

52.20

56.20

0.79

0.98

20.00

25.00

2.84

3.11

mm.

65.20

In.

3.93

F mm.

99.70

Lbs.

0.7720

Weight

Kg.

0.3501

72.20

4.38

111.20

1.2040

79.00

4.77

121.20

1.7750

0.5461

0.8051

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

7. Vibration Test

8. Thermal Cycling Test

4. Bending Test

5. Vacuum Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

†Tested to the performance criteria of ASME B16.51

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

43

www.nibco.com

Revised 6/26/2019 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press Ends Leak Detection • Press x MIP Union • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372 • Conforms to ASME B16.51†

Size range: 1/2” - 1”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

Lead-free markings: White handle and blue hang tag

2 limited warranty

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and Jaw

Compatibility Matrix list.

Not intended for steam or gas usage.

MATERIAL LIST

PCMU-FP-600A-LF

Press x MIP Union

1/2" - 1"

PART

1. Body

2. Seat Seal (2)

3. O-ring

4. Packing

5. Washer

6. Lock Nut

7. Handle

8. Nut

9. Stem

10. Ball

11. End Cap

12. Union Nut

13. Washer

14. MIP Fitting

15. O-ring

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel ASTM 321

Stainless Steel 304

Steel, Plated

Brass

Brass

Chrome Plated Brass - C46500

Forged DZR Copper Alloy - C46500

Brass

EPDM

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000 (Leak Detect)

C

D

1

B

2

4

3

5 6

A

7

8 9

10 11 12 13

14

15

E

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

SIZE

In.

1/2" mm.

12.70

3/4"

1"

3/4" x 1/2" MIP

19.05

25.40

In.

6.31

6.92

7.13

6.80

A mm.

160.20

175.70

181.20

172.70

F

PCMU-FP-600A-LF

NF99UM7

Handle Markings

In.

3.62

DIMENSIONS—WEIGHTS—QUANTITIES

B C D E mm.

92.00

In.

1.34

mm.

34.00

In.

0.59

mm.

15.00

In.

2.60

F mm.

In.

mm.

Lbs.

66.00

4.00

101.70

0.6720

Weight

Kg.

0.3048

4.13

105.00

4.13

105.00

3.98

101.00

2.06

2.21

2.11

52.20

56.20

53.50

0.79

0.98

0.59

20.00

25.00

15.00

2.81

3.05

3.51

71.50

4.38

111.20

1.0580

77.50

4.73

120.20

1.5790

89.20

4.42

112.20

0.9800

0.4799

0.7162

0.4500

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

4. Bending Test

5. Vacuum Test

6. Hydraulic Shock (Water Hammer) Test

7. Vibration Test

8. Thermal Cycling Test

†Tested to the performance criteria of ASME B16.51

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

44

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

www.nibco.com

Revised 7/25/2018 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press End Leak Detection • Solder Union • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61 & 372 • MSS SP-145 • Conforms to ASME B16.51†

Size range: 1/2” - 1”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

2 limited warranty

Lead-Free markings: White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and

Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PART

1. Body

2. Seat Seal

3. O-ring

4. Washer

5. Lock Nut

6. Handle

7. Stem

8. Ball

9. End Cap

10. O-ring

11. Fitting

12. Washer

13. Nut

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel + Nylon

Steel, Plated

Brass

Chrome Plated Brass - C46500

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000

Forged DZR Copper Alloy - C46500

EPDM

Brass

PCSU-FP-600A-LF

Press x Solder Union

1/2" - 1"

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

In.

1/2

3/4

1

SIZE mm.

12.7

19.05

25.40

A

In.

mm.

5.72

145.20

6.64

168.70

6.90

175.20

4.13

105.00

4.13

105.00

Handle Markings

2.06

2.21

52.20

56.20

0.79

0.98

20.00

25.00

2.44

2.68

PCSU-FP-600A-LF

Press x Solder Union

1/2" - 1"

In.

3.62

DIMENSIONS—WEIGHTS—QUANTITIES

B C D E mm.

92.00

In.

1.34

mm.

34.00

In.

0.59

mm.

15.00

In.

2.13

mm.

54.10

In.

3.41

F mm.

86.70

Lbs.

0.6130

Weight

Kg.

0.2780

62.10

4.10

104.20

1.0010

68.10

4.50

114.20

1.4880

0.4540

0.6749

†Tested to the performance criteria of ASME B16.51

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF) 6. Hydraulic Shock (Water Hammer) Test

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

7. Vibration Test

8. Thermal Cycling Test

4. Bending Test

5. Vacuum Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

45

www.nibco.com

Revised 6/26/2019 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press End Leak Detection • Press x Press Union • Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372 • Conforms to ASME B16.51†

Size range: 1/2” - 1”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F Dezincification

Resistant

Lead-free markings: White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water •

HVAC (condensors, chilled water, hot water heating) • Isolation and

Throttling (half-open to full-open only) • Connect to Rigid Copper

Tubing Manufactured per ASTM B88, Condition H (hard drawn)

2 limited warranty

Reference Press System catalog for updated Approved Tool and

Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PART

1. Body

2. Seat Seal (2)

3. O-ring

4. Packing

5. Washer

6. Lock Nut

7. Handle

8. Nut

9. Stem

10. Ball

11. End Cap

12. Union Nut

13. Washer

14. Press Fitting

15. O-ring (2)

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel ASTM 321

Stainless Steel 304

Steel, Plated

Brass

Brass

Chrome Plated Brass - C46500

Forged DZR Copper Alloy - C46500

Brass

EPDM

Forged DZR Copper Alloy - C46500

EPDM - ASTM D2000 (Leak Detect)

C

D

1

PCU-FP-600A-LF

Press x Press Union

1/2" - 1"

B

2

4

3

5

6

A

7 8

9

10 11 12 13

14

15

E

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

F

Handle Markings

PCU-FP-600A-LF

NF99UP6

1/2" - 1 "

In.

1/2"

3/4"

1"

SIZE mm.

12.70

19.05

25.40

In.

6.82

7.23

7.69

A mm.

173.20

183.70

195.20

In.

3.78

DIMENSIONS—WEIGHTS—QUANTITIES

B C D E mm.

96.00

In.

1.83

mm.

46.50

In.

0.59

mm.

15.00

In.

2.78

F mm.

In.

mm.

70.70

4.36

110.70

3.98

101.00

4.37

111.00

2.11

2.58

53.50

65.50

0.79

0.98

20.00

25.00

3.04

3.24

77.20

4.85

123.20

82.20

5.05

128.20

Lbs.

0.77

Weight

Kg.

0.35

1.19

1.77

0.54

0.80

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

4. Bending Test

5. Vacuum Test

6. Hydraulic Shock (Water Hammer) Test

7. Vibration Test

8. Thermal Cycling Test

†Tested to the performance criteria of ASME B16.51

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

46

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

www.nibco.com

Revised 6/26/2019 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball Valves

Features: Press Slip • Press Ends Leak Detection • Double Stem Seal • Two-Piece Body • PTFE Seats •

Full Port • Blowout-Proof Stem

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372 • Conforms to ASME B16.51†

Size range: 1/2” - 1”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 225 psi at 250° F

Lead-free markings: White handle and blue hang tag

Applications: Drinking Water • Domestic Hot & Cold Water • HVAC (condensors, chilled water, hot water heating) • Isolation and Throttling (halfopen to full-open only) • Connect to Rigid Copper Tubing Manufactured per

ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

MATERIAL LIST

PART SPECIFICATION

1. Body

2. Seat Seal (2)

3. O-ring

4. Packing

5. Washer

6. Lock Nut

7. Handle

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel ASTM 321

Stainless Steel 304

Steel, Plated

8. Nut

9. Stem

Brass

Brass

10. Ball Chrome Plated Brass - C46500

11. End Cap / Slip Side Forged DZR Copper Alloy - C46500

12. O-ring (2) EPDM - ASTM D2000

C

D

1

12

B

2

PC-FP-600A-S-LF

Press x Press Slip

1/2" - 1"

4

3

5

6

Dezincification

Resistant

A

7

8 9

10 11

E

F

PC-FP-600A-S-LF

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

• Mini Flat

Handle Markings

1/2" - 1" ‡

2 limited warranty

SIZE

In.

1/2"

3/4"

1"

In.

8.23

9.12

10.13

A mm.

209

231.7

257.2

In.

3.78

3.98

4.37

B mm.

96

101

111

DIMENSIONS—WEIGHTS—QUANTITIES

C D E

In.

1.83

2.11

2.58

mm.

46.5

53.5

65.5

In.

0.63

0.88

1.14

mm.

16.03

22.43

28.96

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

4. Bending Test

5. Vacuum Test

6. Hydraulic Shock (Water Hammer) Test

7. Vibration Test

8. Thermal Cycling Test

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

In.

2.41

2.88

3.43

mm.

61.2

73.2

87.2

In.

5.76

6.74

7.49

F mm.

146.2

171.2

190.2

Lbs.

0.7

1.19

1.82

Weight

Kg.

0.32

0.54

0.83

†Tested to the performance criteria of ASME B16.51

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

LEAD-FREE: Weighted average lead content ≤ 0.25%

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

47

www.nibco.com

Revised 6/26/2019 A H E A D O F T H E F L O W ®

NIBCO ® Press System Lead-Free Brass Ball & Check Valves

Features: All-in-one Ball and Inline Check Valve • Press Ends Leak Detection • Double Stem Seal •

Two-Piece Body • PTFE Seats • Full Port • Blowout-Proof Stem

Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372 • Conforms to ASME B16.51†

Size range: 1/2” - 11/2”

Pressure rating: 250 psi non-shock cold working pressure

Maximum pressure / temperature: 150 psi at 250° F

Lead-free markings: White handle and blue hang tag

NSF/ANSI 61 & 372

IAPMO/ANSI Z1157

Dezincification

Resistant

2 limited warranty

Applications: Drinking Water • Domestic Hot & Cold Water • HVAC (condensors, chilled water, hot water heating) • Isolation and Throttling (half-open to full-open only) • Connect to Rigid Copper Tubing Manufactured per ASTM B88, Condition H (hard drawn)

Reference Press System catalog for updated Approved Tool and Jaw Compatibility Matrix list.

Not intended for steam or gas usage.

PART

1. Body

2. Seat Seal (2)

3. O-ring

4. Packing

5. Washer

6. Lock Nut

7. Handle

8. Nut

9. Stem

10. Ball

11. End Cap

12. Check Valve

13. O-ring (2)

14. Metal Ring (2)

MATERIAL LIST

SPECIFICATION

Forged DZR Copper Alloy - C46500

PTFE

EPDM - ASTM D2000

PTFE

Stainless Steel ASTM 321

Stainless Steel 304

Steel, Plated

Brass

Brass

Chrome Plated Brass - C46500 (1/2"-1")

Stainless Steel 316 (11/4"-11/2")

Forged DZR Copper Alloy - C46500

OV25-HT Cartridge

EPDM - ASTM D2000 (Leak Detect)

Stainless Steel (11/4"-11/2")

PC-FP-485-LF

Press x Press

1/2" - 11/2"

(Patent US 10,240,698: sizes 11/4"-11/2")

Options:

• Extended lever

• EPDM Seal for Press Ends

• Wing Handle

• Mini Flat

SIZE

In.

1/2"

3/4"

1"

11/4"

11/2"

A

In.

mm.

5.87

149.00

6.58

167.20

7.36

187.00

8.82

224.00

10.69

271.50

Handle Markings

B

In.

3.78

mm.

96.00

3.98

101.00

4.37

111.00

5.04

128.00

6.22

158.00

DIMENSIONS—WEIGHTS—QUANTITIES

C D E

In.

1.83

2.11

2.58

2.70

3.16

mm.

In.

mm.

46.50

0.631

16.03

53.50

0.883

22.43

65.50

1.140

28.96

68.50

1.386

35.20

80.20

1.636

41.56

In.

1.82

2.39

2.90

mm.

46.20

60.70

73.70

3.62

91.90

4.22

107.20

In.

3.39

4.20

4.71

5.86

7.00

F mm.

86.20

106.70

119.70

148.90

177.70

PC-FP-485-LF

Press x Press

1/2" - 11/2"

Lbs.

0.50

0.88

1.42

2.16

3.12

Weight

Kg.

0.23

0.40

0.65

0.98

1.42

IAPMO/ANSI Z1157: in addition to meeting ICG-157 test requirements, the IAPMO/ANSI Z1157 also requires Press ends to be fully tested to IAPMO PS-117 performance requirements which includes the following additional tests:

1. Unrestrained Hydrostatic Pressure Test at 20 ºC (68ºF)

2. Unrestrained Hydrostatic Pressure Test at 93 ºC (200ºF)

3. Static Torsion Test for Press Connections

4. Bending Test

5. Vacuum Test

6. Hydraulic Shock (Water Hammer) Test

7. Vibration Test

8. Thermal Cycling Test

†Tested to the performance criteria of ASME B16.51

‡ Patent US 10,240,698

9. Alternate Thermal Cycling Test

10. Dynamic Torsion Test for Press Connections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

LEAD-FREE: Weighted average lead content ≤ 0.25%

48

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Gate Valves

Screw-In Bonnet • Rising Stem • Solid Wedge

200 psi/13.8 bar non-shock cold working pressure

250°F maximum operating temperature

CONFORMS TO MSS SP-80

PART

1. Handwheel Nut

2. Identification Plate

3. Handwheel

4. Stem

5. Pack Nut

6. Pack Gland

7. Packing

8. Bonnet

9. Body Assembly

10. Wedge

11. Female Adapter (2)

12. O-Ring (2)

MATERIAL LIST

SPECIFICATION

300 Series Stainless Steel

Aluminum

Malleable Iron ASTM A 47

Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100

Brass ASTM B 16 Alloy C36000

Brass ASTM B 16 Alloy C36000

Aramid Fibers with Graphite

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 61 Alloy C92200

EPDM

DIMENSIONS—WEIGHTS

Dimensions

Size A

B C

In. mm. In. mm. In. mm. In. mm. Lbs. Kg.

¹⁄₂ † 15 1.97 50 4.81 122 .50 13 .84 .38

³⁄₄ 20 2.62 67 5.81 148 .75 19 1.30 .59

25 3.07 78 7.09 180 1.00 25 2.09 .95

1 ¹⁄₄ 32 3.36 85 8.13 206 1.25 32 2.95 1.34

1 ¹⁄₂ 40 3.70 94 9.81 249 1.50 38 4.16 1.89

50 4.28 109 11.56 294 2.00 51 6.79 3.09

† No packing gland, packing only in this size.

NIBCO Press System gate valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

PF-111

Press x Press

Female End

PF-111

P x P

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

49

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/25/2018

NIBCO

®

Press System Lead-Free

Bronze Gate Valves

Silicon Performance Bronze ® Alloy • Screw-In Bonnet • Rising Stem •

Conforms to MSS SP-139 • Solid Wedge • Press Ends Leak Detection

Pressure rating: 250 † psi non-shock cold working pressure

Maximum pressure / temperature: 180 psi at 200° F

Dezincification

Resistant

Lead-Free markings:

Double oval in body casting, white handle and blue hang tag

NSF/ANSI-61-8 Commercial Hot 180°F

(includes Annex F and G) • NSF/ANSI-372

PART

1. Handwheel Nut

2. Handwheel

3 . Stem

4 . Packing Gland

5 . Stem Packing

6 . Packing Nut

7 . Bonnet

8 . Body

9 . Wedge

10 . Identification Plate

11 . Boss seal o-ring (2)

12 . Press End Adapter (2)

13 . Leak Detect O-Ring (2)

MATERIAL LIST

SPECIFICATION

300 Series Stainless Steel

Malleable Iron ASTM A47, 35018

Silicon Bronze ASTM B371 Alloy C69430

ASTM B16 C36000

Aramid Fibers with Graphite

ASTM B16 C36000

Silicon Bronze ASTM B584 Alloy C87850

Silicon Bronze ASTM B584 Alloy C87850

Silicon Bronze ASTM B584 Alloy C87850

Aluminum

EPDM

Wrot Copper ASTM B75 Alloy C12200

EPDM

PC-111-LF

Press x Press

Female End

SIZE A B

DIMENSIONS—WEIGHTS—QUANTITIES

C D E F G H Weight

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In. mm.

Lbs.

Kg.

1/2 † 15 3.68 93.47 4.85 123 2.28

57.9

3.92 100 4.82 122 0.5 13 0.7 17.78 2.44

62 0.96

0.43

3/4 20 4.28 108.7 5.89 150 2.36

60 4.93 125 5.74 146 0.75 19 0.96

24 2.44

62 1.38

0.62

1 25 4.62 117.3 7.21 183 2.85

72.4

5.95 151 6.93 176 1.00 25 0.88 22.35 3.19

81 2.18

0.99

1-1/4 32 5.1 129.5 8.20 208 3.08

78.23 6.69 170 7.84 199 1.25 32 1.01 25.65 3.19

81 3.15

1.43

1-1/2 40 6.18 157 9.40 239 3.41

86.6

7.51 191 8.94 227 1.50 38 1.38

35 4.42

112.3

4.5

2.04

2 50 6.44 163.6 11.54

293 3.42

86.9

9.65 245 10.84 275 2.00 51 1.51 38.3

4.42

112.3

6.7

3.04

2-1/2 65 7.56 192 14.4

366 4.62

117.3 11.86 301 13.52 343 2.50 64 1.47 37.3

4.42

112.3

11.9

5.4

3 80 8.49 215.6 16.6

422 5.17

131.3 13.89 353 15.65 398 3.00 76 1.66 42.2

5.28

134.1

18.6

8.44

† 200 psi for 2 1/2” and 3”

‡ No packing gland, packing only in this size.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

Master

Ctn Qty.

50

25

20

10

10

4

4

4

Visit our website for the most current information.

50

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Gate Valves

Screw-In Bonnet • Non-Rising Stem • Solid Wedge

200 psi/13.8 bar non-shock cold working pressure

250°F maximum operating temperature

CONFORMS TO MSS SP-80

PART

1. Handwheel Nut

2. Identification Plate

3. Handwheel

4. Stem

5. Pack Nut

6. Pack Gland

7. Packing

8. Stuffing Box

9. Bonnet

10. Body Assembly

11. Wedge

12. Female Adapter (2)

13. O-Ring (2)

MATERIAL LIST

SPECIFICATION

300 Series Stainless Steel

Aluminum

Malleable Iron ASTM A 47

Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100

Brass ASTM B 16 Alloy C36000

Brass ASTM B 16 Alloy C36000

Aramid Fibers with Graphite

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 61 Alloy C92200

EPDM

PF-113

Press x Press

Female End www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

DIMENSIONS—WEIGHTS

Dimensions

Size A

B C

In. mm. In. mm. In. mm. In. mm. Lbs. Kg.

¹⁄₂ † 15 1.97 50 3.63 92 .50 13 .78 .36

³⁄₄ 20 2.62 67 3.91 99 .75 19 1.21 .55

25 3.07 78 4.69 119 1.00 25 1.92 .88

1 ¹⁄₄ 32 3.36 85 5.22 133 1.25 32 2.69 1.22

1 ¹⁄₂ 40 3.70 94 6.25 159 1.50 38 3.91 1.78

50 4.28 109 7.06 179 2.00 51 6.21 2.83

† No packing gland, packing only in this size.

NIBCO Press System gate valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female pressto-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

PF-113

P x P

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

51

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/25/2018

NIBCO

®

Press System Lead-Free Bronze Gate Valves

Silicon Performance Bronze ® Alloy • Screw-In Bonnet • Non-Rising Stem •

Conforms to MSS SP-139 • Solid Wedge • Press Ends Leak Detection

Pressure rating: 250 † psi non-shock cold working pressure

Maximum pressure / temperature: 180 psi at 200° F

Dezincification

Resistant

Lead-Free markings:

Double oval in body casting, white handle and blue hang tag

NSF/ANSI-61-8 COMMERCIAL HOT 180°F (INCLUDES

ANNEX F AND G) • NSF/ANSI-372

PART

1. Handwheel Nut

2 . Handwheel

3 . Stem

4 . Packing Gland

5 . Stem Packing

6 . Packing Nut

7 . Stuffing Box

8 . Bonnet

9 . Body

10 . Wedge

11. Identification Plate

12 . Boss seal o-ring (2)

13 . Press End Adapter (2)

14 . Leak Detect O-Ring (2)

MATERIAL LIST

SPECIFICATION

300 Series Stainless Steel

Malleable Iron ASTM A47, 35018

Silicon Bronze ASTM B371 Alloy C69430

ASTM B16 C36000

Aramid Fibers with Graphite

ASTM B16 C36000

Silicon Bronze ASTM B584 Alloy C87850

Silicon Bronze ASTM B584 Alloy C87850

Silicon Bronze ASTM B584 Alloy C87850

Silicon Bronze ASTM B584 Alloy C87850

Aluminum

EPDM

Wrot Copper ASTM B75 Alloy C12200

EPDM

PC-113-LF

Press x Press

Female End

SIZE A B

In.

mm.

In.

mm.

In.

mm.

In.

1/2† 15

3.68 93.47 3.66

93 2.28

3/4 20

4.24 107.7 3.94

100 2.36

1 25 4.62 117.3 4.62

117.3

2.85

1-1/4 32 5.1

129.5 5.19

132 3.08

1-1/2 40 6.18

157 6.3

160 3.41

2 50 6.44 163.6 7.09

180 3.42

DIMENSIONS—WEIGHTS—QUANTITIES

C D E F G H mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

In.

mm.

Lbs.

57.9

3.34 84.84 4.24 107.7

0.5

13 0.7

17.78 2.44

62 0.91

Kg.

0.41

59.9

3.85

97.8

4.64

118 0.75

19 0.96

24 2.44

62

72.4

4.69

119 5.52

140 1.00

25 0.88 22.35 3.19

81

1.28

0.58

2.09

0.95

78.2

5.26 133.6 6.25

159 1.25

32 1.01 25.65 3.19

81 3.03

1.37

86.6

6.07 154.2

7.5

191 1.50

38 1.38

35 4.42 112.3

4.18

1.9

86.9

7.33 186.2 8.59

218 2.00

51 1.51

38.3

4.42 112.3

6.1

Weight

2.77

2-1/2 65 7.56

192 8.88

226 4.62

117.3

9.28 235.7 10.69

272 2.50

64 1.47

37.3

4.42 112.3

11.2

5.08

3 80 8.49 215.6 10.24

2.6

5.17

131.3

10.71 272 12.5

318 3.00

76 1.66

42.2

5.28 134.1 17.37

7.89

† 200 psi for 2 1/2” and 3”

‡ No packing gland, packing only in this size.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

Master

Ctn Qty.

30

25

20

10

10

4

4

4

Visit our website for the most current information.

52

LEAD-FREE: Weighted average lead content ≤ 0.25%

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Globe Valves

Screw-In Bonnet • Integral Seat • Renewable Seat and Disc

200 psi/13.8 bar non-shock cold working pressure

250°F maximum operating temperature

CONFORMS TO MSS SP-80

PART

1. Handwheel Nut

2. Identification Plate

3. Handwheel

4. Stem

5. Pack Gland

6. Pack Nut

7. Packing

8. Bonnet

9. Disc Holder Nut

10. Disc Holder

11. Disc

12. Disc Washer

13. Disc Nut

14. Body Assembly

15. Female Adapter (2)

16. O-Ring (2)

MATERIAL LIST

SPECIFICATION

300 Series Stainless Steel

Aluminum

Malleable Iron ASTM A 47

Silicon Bronze ASTM B 371 Alloy C69430

Brass ASTM B 16 Alloy C36000

Brass ASTM B 16 Alloy C36000

Aramid Fibers with Graphite

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

PTFE

304 Stainless Steel

Bronze ASTM B 98 Alloy C65100

Bronze ASTM B62 Alloy C83600

Bronze ASTM B 61 Alloy C92200

EPDM

PF-211-Y

Press x Press

Female End www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

DIMENSIONS—WEIGHTS

Dimensions

Size A B C Weight

In. mm. In. mm. In. mm. In. mm. Lbs. Kg.

*

¹⁄₂

†

15 2.91 74 3.38 86 .50 13 1.07 .48

³⁄₄ 20 3.99 101 4.88 124 .75 19 2.04 .93

1 25 4.88 124 5.69 145 1.00 25 3.13 1.42

1 ¹⁄₄ 32 5.23 133 6.13 156 1.25 32 4.00 1.82

1 ¹⁄₂ 40 6.01 153 7.38 187 1.50 38 6.44 2.93

2 50 7.41 188 7.94 202 2.00 51 10.16 4.62

† No packing gland, packing only in this size.

* Stem and disc (or disc holder) are integral.

NIBCO Press System globe valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

PF-211-Y

P x P

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

53

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Angle Valves

Screw-In Bonnet • Integral Seat • Renewable Seat and Disc

200 psi/13.8 bar non-shock cold working pressure

250°F maximum operating temperature

CONFORMS TO MSS SP-80

PART

1. Handwheel Nut

2. Identification Plate

3. Handwheel

4. Stem

5. Pack Gland

6. Pack Nut

7. Packing

8. Bonnet

9. Disc Holder Nut

10. Disc Holder

11. Disc

12. Disc Washer

13. Disc Nut

14. Body

15. Female Adapter (2)

16. O-Ring (2)

MATERIAL LIST

SPECIFICATION

300 Series Stainless Steel

Aluminum

Malleable Iron ASTM A 47

Silicon Bronze ASTM B 371 Alloy C69430

Brass ASTM B 16 Alloy C36000

Brass ASTM B 16 Alloy C36000

Aramid Fibers with Graphite

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

PTFE

304 Stainless Steel

Silicon Bronze ASTM B 96 Alloy C65100

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 61 Alloy C92200

EPDM www.nibco.com

Revised 7/25/2018

PF-311-Y

Press x Press

Female End

Dezincification

Resistant

DIMENSIONS—WEIGHTS

Dimensions

Size B

H J

In. mm. In. mm. In. mm. In. mm. Lbs. Kg.

* ¹⁄₂

† 15 3.50 89 1.49 38 1.49 38 1.07 .48

³⁄₄ 20 4.94 126 2.00 51 2.00 51 1.94 .88

25 5.75 146 2.48 63 2.48 63 3.12 1.42

1 ¹⁄₄ 32 6.13 156 2.59 66 2.59 66 4.21 1.92

1 ¹⁄₂ 40 7.25 179 2.98 76 2.98 76 5.44 2.47

50 8.13 206 3.64 93 3.64 93 9.98 4.54

† No packing gland, packing only in this size.

* Stem and disc or disc holder are integral.

NIBCO Press System angle valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

PF-311-Y

P x P

Visit our website for the most current information.

54

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

Lead-Free Bronze Check Valves

Silicon Performance Bronze ® Alloy • Horizontal Swing • Regrinding Type • Y-Pattern •

Renewable Seat and Disc • Conforms to MSS SP-139 • Press Ends

Pressure rating: 200 psi non-shock cold working pressure

Maximum pressure / temperature: 100 psi at 250° F

Lead-Free marking:

Double oval in body casting

NSF/ANSI-61-8 COMMERCIAL HOT 180°F (INCLUDES

ANNEX F AND G) • NSF/ANSI-372

MATERIAL LIST

PART SPECIFICATION

1. Bonnet

2. Body

3. Hinge Pin

Silicon Bronze ASTM B584 Alloy C87850

Silicon Bronze ASTM B584 Alloy C87850

ASTM A276 Alloy S31600 or ASTM A276 Alloy S30400

4. Disc Hanger

5. Stainless Steel Nut (2)

Silicon Bronze ASTM B584 Alloy C87850

ASTM F594 Alloy S31600 or ASTM F594 Alloy S30400

6. Disc Holder

Silicon Bronze ASTM B371 Alloy C69300

7. Seat Disc PTFE

*9. Disc Washer

10. O-Ring

304 Stainless Steel

EPDM

11. Press End Adapter ASTM B75 Alloy C12200

12. Crimp Evident Seal O-Ring 304SS or 316SS

*Sizes ³⁄₄ ", 1", 1 ¹⁄₄ ", 1 ¹⁄₂ " and 2" only

DIMENSIONS—WEIGHTS

In.

SIZE mm.

¹⁄₂

A

In.

(Lay Length)

15 2.78

mm.

71

³⁄₄ 20 3.25

83

1 25 3.97

101

1 ¹⁄₄ 32 4.64

118

1 ¹⁄₂ 40 5.00

127

2 50 5.85

149

Dimensions

B

(Height)

In.

Master Weight mm.

Ctn Qty Lbs.

Kg.

1.66

42 40 0.72

0.33

1.90

2.27

2.67

3.09

3.84

48

58

68

79

98

40

25

20

16

4

1.13

1.80

2.42

3.75

5.51

0.51

0.82

1.10

1.70

2.50

NIBCO ® check valves may be installed in both horizontal and vertical lines with upward flow or in any intermediate position. They will operate satisfactorily in a declining plane (no more than 15º). Install check valves as far from pump discharge or line direction change as possible and at a minimum length of 5 times the pipe diameter.

Do not use for reciprocating air compressor service.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

PC-413-Y-LF

Press Ends

PC-413-Y-LF

Press x Press

LEAD-FREE: Weighted average lead content ≤ 0.25% Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

55

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Check Valves

Horizontal Swing • Regrinding Type • Y-Pattern • Renewable Seat and Disc

200 psi/13.8 bar non-shock cold working pressure

250°F maximum operating temperature

PART

1. Bonnet

2. Body

3. Hinge Pin

4. Disc Hanger

5. Hanger Nut

6. Disc Holder

7. Seat Disc

8. Seat Disc Nut

9. Hinge Pin Plug

*10. Seat Disc Washer

11. Female Adapter (2)

12. O-Ring (2)

CONFORMS TO MSS SP-80

MATERIAL LIST

SPECIFICATION

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 62 Alloy C83600

Bronze ASTM B 140 Alloy C31400

Bronze ASTM B 62 Alloy C83600 or 304 SS

1/2" and 3/4" sizes only

Brass ASTM B 16 Alloy C36000

Bronze ASTM B 62 Alloy C83600

PTFE

Brass ASTM B 16 Alloy C36000

Bronze ASTM B 140 Alloy C32000 (not shown)

ASTM B 98 Alloy C65500 or ASTM B 103

Bronze ASTM B 61 Alloy C92200

EPDM

* Sizes 3/4" thru 2" only

PF-413-Y

Press x Press

Female End www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

DIMENSIONS—WEIGHTS

Dimensions

Size A B Weight

In. mm. In. mm. In. mm. Lbs. Kg.

¹⁄₂ 15 2.72 69 1.54 39 .58 .26

1

³⁄₄ 20 3.62 92 1.83 46 .96 .44

25 4.32 110 2.21 56 1.51 .69

1 ¹⁄₄ 32 4.92 125 2.69 68 2.29 1.04

1 ¹⁄₂ 40 5.58 142 2.94 75 3.30 1.50

2 50 6.72 171 3.61 92 5.45 2.48

NIBCO Press System check valves are designed to meet MSS SP-80 with the exception of the end connection. Male and female pressto-connect ends are new technology not yet covered in the current edition of this specification.

WARNING — Do not use for reciprocating air compressor service

NIBCO check valves may be installed in both horizontal and vertical lines with upward flow or in any intermediate position. They will operate satisfactorily in a declining plane (no more than 15º).

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

PF-413-Y

P x P

Visit our website for the most current information.

56

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/25/2018

NIBCO ® Press System Bronze In-line Lift Check Valves

In-Line Lift Type • Resilient Discs • Spring Actuated

200 psi/17.2 bar non-shock cold working pressure

250°F maximum operating temperature

Dezincification

Resistant

PART

1. Body

2. Stem

3. Spring

4. Disc Holder

5. Disc

6. Seat Screw

7. Body End

8. Adapter (2)

9. O-Ring (2)

MATERIAL LIST

SPECIFICATION

Bronze ASTM B584 Alloy C84400

Stainless Steel ASTM A582

Alloy C30300

316 Stainless Steel

Stainless Steel Type 301

PTFE

Stainless Steel ASTM A276

Alloy S43000

Bronze ASTM B584 Alloy C84400

Bronze ASTM B61 Alloy C92200

EPDM

DIMENSIONS—WEIGHTS

Dimensions

Size A B C Weight

In. mm. In. mm. In. mm. In. mm Lbs. Kg.

¹⁄₂ 15 2.41 61 1.38 35 .50 13 0.52 0.24

³⁄₄ 20 3.05 77 1.63 41 .75 19 0.75 0.34

1 25 3.56 90 2.00 51 1.00 25 1.18 0.54

1 ¹⁄₄ 32 3.86 98 2.38 60 1.25 32 1.72 0.78

1 ¹⁄₂ 40 4.45 113 2.75 70 1.50 38 2.49 1.13

2 50 5.28 134 3.38 86 2.00 51 3.96 1.80

NIBCO Press System check valves may be installed in both horizontal and vertical lines with upward flow or in any intermediate position.

WARNING - Do Not Use for reciprocating air compressor service.

NOTE: 0.5 psi pressure required to open spring.

NOTE: Check valves are down-rated from 250 psi CWP to 200 psi CWP to match the Press System.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

PF-480-Y

Press x Press

Female End

PF-480-Y (PTFE Disc)

P x P

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

57

A H E A D O F T H E F L O W ®

NIBCO ® Press System Butterfly Valves

Ductile Iron Body • Extended Neck • Geometric Drive

Molded-In Seat Liner • Lug Style with Press x Press Female Ends

200 psi/13.8 bar non-shock cold working pressure

250°F maximum operating temperature

CONFORMS TO MSS-SP67 • MSS-SP25 • API-609

•

NSF/ANSI-8 COMMERCIAL HOT 180°F (INCLUDES

ANNEX F AND G) AND NSF/ANSI-372

PART

MATERIAL LIST

SPECIFICATION

1. Stem

2. Collar Bushing

3. Stem Seal

4. Body Seal

5. Nameplate

6. Upper Bushing

7. Liner

8. Disc

Stainless Steel ASTM A 582 Type 416

Brass ASTM B 124

EPDM Rubber

EPDM Rubber

Aluminum

Wrot Copper ASTM B 75 Alloy C12200

EPDM Rubber

Alum. Brz. ASTM B 148 Alloy 954/955

9. Lower Bushing

10. Body Lug

11. Flange Body (2)

12. Flange Gasket (2)

Wrot Copper ASTM B 75 Alloy C12200

Ductile Iron ASTM A 536

Carbon Steel

EPDM

13. Flange Press Ends (2) Wrot Copper ASTM B 75 Alloy C12200

14. O-Ring (2) EPDM

15. Cap Screws Carbon Steel

Available with lock lever handle or gear operator.

www.nibco.com

Revised 7/25/2018

PFD-2000

Lug Style

EPDM Liner and Aluminum

Bronze Disc

Press x Press

Female End

DIMENSIONS — WEIGHTS

Size

In. mm. A B C D E F Flat H I

2

1 ⁄

2

65 2.90 4.69 1.25 5.88 3.27 .38 .370 1.812 1.938

3 80 3.15 5.12 1.25 6.12 3.40 .38 .370 1.812 1.938

4 100 4.09 6.12 1.25 6.88 4.00 .38 .403 2.062 2.188

Size J N O P R S Lug

Weight

In. mm. Square Dia. B.C. Dia. Dia. No. Length Lbs. Kg.

2 1 ⁄

2

65 3.25 .562 3.25 .437 .500 3.13 Refer to

3

4

80 3.25 .562 3.25 .437 .500 3.44

100 3.25 .625 3.25 .437 .562 4.00

page 65 for bolt lengths

24.00 10.88

26.00 11.78

38.00 17.23

NIBCO Press System butterfly valves are designed to meet MSS SP-67 with the exception of the end connection. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

58

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

NOT RECOMMENDED

FOR STEAM SERVICE

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Ball Valves

Two-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem

600 psi/41.4 bar non-shock cold working pressure

250°F maximum operating temperature

PART

1. Handle Nut

2. Handle Assembly

3. Pack Gland

4. Packing

5. Stem

6. Thrust Washer

7. Ball

8. Seat Ring (2)

9. Body

10. Body End Piece

11. Stub Out (2)

CONFORMS TO MSS SP-110

MATERIAL LIST

SPECIFICATION

Zinc Plated Steel

Zinc Plated Steel with Plastisol Cover

Brass ASTM B 16 Alloy C36000

PTFE

Silicon Bronze ASTM B 371 Alloy C69430

RPTFE

Brass ASTM B 16 Alloy C36000 or ASTM B 124

Alloy C37700 (Chrome/Nickle Plated)

RPTFE

Bronze ASTM B 584 Alloy C84400

Bronze ASTM B 584 Alloy C84400

Type “L” Copper Tube

PS-585-70

Press x Press

Male End www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

DIMENSIONS—WEIGHTS

Dimensions

Size A B C D Weight

In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.

¹⁄₂ 15 6.56 184 .50 13 .73 .99

³⁄₄ 20 7.25 184 2.25 57 8.25 210 .75 19 1.50 .68

1

1 ¹⁄₄ 32 9.06 230 3.00 76 9.19 233 1.25 32 3.64 1.65

1 ¹⁄₂ 40 9.99 254 3.16 80 11.69 297 1.50 38 5.73 2.60

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi

CWP to 200 psi CWP to match the NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

PS-585-70

P x P

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

59

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Ball Valves

Two-Piece Body • Full Port • Stainless Trim • Blowout-Proof Stem • Vented Ball

600 psi/41.4 bar non-shock cold working pressure

250°F maximum operating temperature

Nominal sizes 1/2" through 1" are UL certified to NSF/ANSI 61

PART

1. Handle Nut

2. Handle Assembly

3. Pack Gland

4. Packing

5. Stem

6. Thrust Washer

7. Ball

8. Seat Ring (2)

9. Body

10. Body End Piece

11. Stub Out (2)

CONFORMS TO MSS SP-110

MATERIAL LIST

SPECIFICATION

Zinc Plated Steel

Zinc Plated Steel with Plastisol Cover

Brass ASTM B 16 Alloy C36000

PTFE

ASTM A 276 Alloy S31600 Stainless Steel

RPTFE

ASTM A 276 Alloy S31600 Stainless Steel

RPTFE

Bronze ASTM B 584 Alloy C84400

Bronze ASTM B 584 Alloy C84400

Type “L” Copper Tube

PS-585-70-66

Press x Press

Male End www.nibco.com

Revised 7/25/2018

Dezincification

Resistant

DIMENSIONS—WEIGHTS

Dimensions

Size A B C D Weight

In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.

¹⁄₂ 15 6.56 184 .50 13 .73 .33

³⁄₄ 20 7.25 184 2.25 57 8.25 210 .75 19 1.50 .68

1

1 ¹⁄₄ 32 9.06 230 3.00 76 9.19 233 1.25 32 3.86 1.75

1 ¹⁄₂ 40 9.99 254 3.16 80 11.69 297 1.50 38 5.79 2.63

NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi

CWP to 200 psi CWP to match the NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

PS-585-70-66

P x P

Visit our website for the most current information.

60

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 7/25/2018

NIBCO ® Press System Bronze Ball Valves

Two-Piece Body • Full Port • Bronze Trim • ³⁄₄ " Hose Connection with Cap and Chain •

Blowout-Proof Stem

600 psi/41.4 bar non-shock cold working pressure

250°F maximum operating temperature

PART

1. Handle Nut

2. Handle

3. Pack Gland

4. Packing

5. Thrust Washer

6. Stem

7. Ball

8. Seat Rings

9. Body Assembly

10. Hose Body End

11. Cap

12. Gasket

13. Chain

14. Stub Out

CONFORMS TO MSS SP-110

MATERIAL LIST

SPECIFICATION

Zinc Plated Steel

Zinc Plated Steel

Brass ASTM B 16 Alloy C36000

PTFE

RPTFE

Silicon Bronze ASTM B 371 Alloy C69430

Brass ASTM B 16 Alloy C36000 or ASTM B 124

Alloy C37700 (Chrome/Nickle Plated)

Reinforced PTFE

Bronze ASTM B 584 Alloy C84400

Brass ASTM B 124 Alloy C37700

Die Cast Brass

Rubber

Brass

Type “L” Copper Tube

Cap is for hose end thread protection only. Not to be used for pressure containing purposes.

PS-585-70-HC

Press Male x Hose End

DIMENSIONS—WEIGHTS

Dimensions

Size A B C Weight

In. mm. In. mm. In. mm. In. mm. Lbs. Kg.

¹⁄₂ 15 4.90 124 1.88 48 7.19 183 .81 .37

³⁄₄

20 5.47 139 2.25 57 8.25 210 1.54 .70

NIBCO Press System ball valves are designed to meet MSS

SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 200 psi CWP to match the

NIBCO Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

PS-585-70-HC

Press x Hose

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

61

A H E A D O F T H E F L O W ®

Class 125 Bronze Y-Strainers

Screw-In Cap • Tapped Cap with Blow-Off Plug or Solid Cap •

20 Mesh SS Screen or SS Perforated Screen

200 psi/13.8 bar non-shock cold working pressure

250° F maximum operating temperature

CONFORMS TO MSS SP-110

MATERIAL LIST

PART

Body

3. Gasket

4. Screen

SPECIFICATION

Bronze ASTM B584 Alloy C84400

Bronze ASTM B62 Alloy C83600

PTFE

ASTM E2016 20 Mesh - 304 Stainless Steel or

ASTM E674 Perforated - 304 Stainless Steel

Brass ASTM B16 Alloy C36000 or

Bronze ASTM B584 Alloy C84400

6. Female Adapter (2) Bronze ASTM B61 Alloy C92200

7. O-Ring (2) EPDM

END CONNECTION SCREEN CAP

PF- Female Press 221 - 20 Mesh (STD.) A - Tapped Cap w/Plug (STD.)

PF - Female Press 222 - Perforated B - Solid Cap

DIMENSIONS—WEIGHTS—QUANTITIES

Dimensions

¹⁄₂ 15 2.96 75 1.79 45 1/4 NPT 0.66 0.30

³⁄₄ 20 3.94 100 2.14 54 3/8 NPT 1.21 0.55

1 25 4.66 118 2.79 71 3/8 NPT 1.88 0.86

1 ¹⁄₄ 32 5.47 139 3.23 82 3/4 NPT 3.10 1.41

1 ¹⁄₂ 40 6.05 154 3.61 92 3/4 NPT 4.64 2.10

2 50 7.40 188 4.99 127 1 NPT 7.48 3.39

www.nibco.com

Revised 7/25/2018

PF-221/222-A

Press x Press

Female End

PF-221/222-A

P x P

PF-221/222-B

Press x Press

Female End

PF-221/222-B

P x P

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

62

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 11/9/2017

NIBCO ® Press System Ball Valve Handle Options

A wide variety of handles are available to fulfill safety and operation requirements in various processing and manufacturing industries. The lever handle with plastic cover is standard. Other handle options are shown. Stainless steel lever handles are available, as an option, also with plastic covers. If an optional handle is desired, please indicate which one when ordering.

Many of these options are field assembly only.

CS Extended Lever Handle with Memory Stop

Allows for 2" of Insulation

NIB-SEAL ® Handle

Allows for 2" of Insulation

CS Locking Lever Handle CS Round Handle NIB-SEAL ® Locking Extended Handle

SS Standard Lever Handle

CS Extended Round Handle

Allows for 2" of Insulation Vertical Chain Lever

SS Locking Lever Handle CS Wing Handle Horizontal Chain Lever

CS Extended Lever Handle

Allows for 2" of Insulation Seat and Seal Kit Memory Stop Kit

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

63

A H E A D O F T H E F L O W ®

NIBCO ® Press System Bronze Ball Valves

NIB-SEAL

®

Technical Data

www.nibco.com

Revised 11/7/2017

NIBCO bronze ball valves installed with NIB-SEAL insulated handles are the only approach that keeps your insulated piping system completely intact.

The revolutionary NIB-SEAL bronze ball valve stops condensate cold. Its unique thermal barrier design keeps moisture from infiltrating your insulated system while preventing thermal energy loss through exposed metal handles.

Designed for new installations or retrofitting existing systems, NIB-SEAL bronze ball valves offer a wide range of advantages for typical commercial HVAC systems as well as industrial applications where insulated piping is desirable.

• Protective sleeve provides a stationary surface to affix the insulation, allowing operation and maintenance of the valve without destroying the integrity of the insulated system.

• High-strength cylindrical handle design features easy access to standard adjustable memory stop for system

balancing. The valve packing is also readily accessible for routine maintenance.

• Cap and insulating plug provide a vapor seal to prevent exchange of air to maximize the efficiency of your insulated piping system.

• Position indicators allow at-a-glance determination of whether valve is in open or closed position.

• Pre-formed hole allows for convenient tagging.

Temperature range: 15° F to 250° F

Cap keeps moisture-laden air out to reduce chance of condensate formation

Insulation plug provides vapor seal, keeping air from infiltrating the insulated system

Handle nut

Indicator gives at-a-glance valve position

Memory stop plate and screws for system balancing

Pre-formed hole for identification tag

Extension handle of durable non-thermal conductive material prevents formation of condensation

Protective sleeve allows operation of valve handle and maintenance of valve packing while maintaining integrity of piping insulation

NIBCO Press System bronze ball valve is an integral part of the NIB-SEAL valve system

Visit our website for the most current information.

64

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

US PATENT 5,236,006

A H E A D O F T H E F L O W ®

NIB-SEAL ® Locking Handle

The patented technology of the 3-in-1 NIB-SEAL locking handle solves three problems at once: it extends, it insulates, and it locks . The innovative locking handle design extends valve actuation to provide ample room for insulating around piping systems, and its unique thermal barrier system prevents heat transfer and condensate development. The NIB-SEAL locking handle also allows the valve to be locked in the full open or closed position to prevent incidental actuation.

Designed for new installations, the NIB-SEAL locking handle is engineered to work with NIBCO® bronze ball valves.**

Applications: For piping systems requiring up to 2” of insulation, specify a non-conductive

CPVC extended-locking handle bronze ball valve tested to UL 2043, and UL listed for installation in air handling spaces. The assembly offers a vapor seal, position indicators, locking device, and actuation without disturbing the insulation. Designed for new installations, the NIB-SEAL locking handle installed on bronze ball valves offers a wide range of advantages for typical commercial

HVAC systems as well as industrial applications where insulated piping with a locking device is desirable. Specify NIB-SEAL insulated locking handle.

Approvals: UL 2043

Safety Lock Compatibility: Cable lock as small as 1/8 " diameter to padlock as big as 0.33” diameter shackle.

Temperature Range: 15° F to 250° F

Not intended for steam applications in excess of 15 psi.

www.nibco.com

U.S. PATENT 9,810,344

LOCKING DEVICE works with padlock* or cable lock*

CAP keeps moisture-laden air out to reduce chance of condensate formation

INSULATION PLUG provides vapor seal, reducing air infiltrating the system

LOCKING MECHANISM

EXTENSION HANDLE of durable non-thermal conductive CPVC prevents formation of condensation

PREFORMED HOLE for identification tag

PROTECTIVE SLEEVE allows operation of valve handle and maintenance of valve packing while maintaining integrity of piping insulation

NIBCO BALL VALVE

Dimensions

Sizes

1”

1 1/4 ”

1 1/2 ”

2”

1/4 ”

3/8 ”

1/2 ”

3/4 ”

In.

2.19

3.38

3.38

3.38

2.19

2.19

2.19

2.19

A mm.

55.58

55.58

55.58

55.58

55.58

85.73

85.73

85.73

Series 585

B

In.

4.25

6.50

6.50

6.50

4.25

4.25

4.25

4.25

mm.

107.95

107.95

107.95

107.95

107.95

165.10

165.10

165.10

In.

5.88

6.84

7.06

7.30

5.30

5.30

5.42

5.69

C mm.

134.59

134.58

137.56

144.50

149.40

173.67

179.33

185.44

Factory installed only.

Order appropriate factory installed NIBCO valve figure number with suffix “LX“. Example: T-585-70-LX, ½"

NIB-SEAL on solder/sweat ball valves are shipped unassembled.

* Padlock and cable lock not included

** Valve type showing above is just for handle representation

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

65

A H E A D O F T H E F L O W ® www.nibco.com

Revised 8/7/2012

Butterfly Valve Options and Accessories

Lever-Lock Operator (Standard)

PFD2000

Position-Lock Operator (Optional)

PFD2000

The lever-lock handle and throttling plate provide throttling notches every 10o for excellent manual control in balancing up to 90o or shut off service. The valve may be padlocked in any one of the positions including opened or closed by virtue of a locking hole located in the handle and lever.

The position-lock can be used to set the valve in any position or as a memory stop so the valve may be reopened to the previous position.

The valve may be padlocked in full open or full closed position.

Ordering: Sold as a field retrofitable kit only.

MATERIAL LIST

PART SPECIFICATION

1. Handle

2. Lever-Lock

3. Throttle Plate

Polymer Coated Iron

Zinc Plated Steel

Zinc Plated Steel

PFD

Lever Lever Throttle Plate/

Size (STD) (STD)

DIMENSIONS AND TORQUE OUTPUT

Dimensions

Infinite Pos. Kit A B C D

2

¹⁄₂

”-3” T115107PP T115138PP T114841FG 10

¹⁄₂

1 4

⁵⁄₈

6

³⁄₁₆

4 T115108PP T115138PP T114842FG 10 ¹⁄₂ 1 4 ⁵⁄₈ 6 ³⁄₁₆

Torque Rated Output in Inch-Pounds

At 60 pounds Pull At 100 pounds Pull

540 In-Lbs. 900 In-Lbs.

540 In-Lbs. 900 In-Lbs.

Gear Operator options and accessories (2 1/2" through 4" 2000 series only)

2" Square Operating Nut Memory Stop Flag Indicator

Consult factory for: square operating nut, memory stop and flag indicator

2 1/2"-4"

Cast Iron Gear Operator

The NIBCO ® butterfly valve can be provided with heavy-duty operator and indicator. Recommended for valves 8" and larger, for trouble-free operation in all moisture and weather conditions (not submersible). Operator is a self-locking worm gear type. Equipped with adjustable stops at open and shut positions.

Ordering: Specify by adding (-5) to Fig. No., i.e., PFD2000-5. Babbit sprocket may be added to handwheel. See below for sizing information.

Available options: memory stop gear operator kit, 2" square operating nut, flag indicator and handwheel for GO.

PFD

VALVE

21/2 - 3

4

GEAR OPERATOR DETAIL FOR SIZES 2 1/2" TO 4" (PFD2000 ONLY) GEAR OPERATOR ACCESSORIES & REPLACEMENT PARTS

GEAR GEAR

OPERATOR RATIO OP

NUMBER WEIGHT A

DIMENSIONS (INCHES)

B C D E

STEM SPROCKET SQUARE

ADAPTER RIM OPERATING

F BUSHING MODEL NUT

FLAG MEMORY REPLACEMENT

INDICATOR STOP KIT HANDWHEEL

T117118PP 24:1 10 7.64 1.77 5.04 4.24 5.91 2.79 T046653PP #11/2 T117792FC T116682PP T026196PP T117122PP

T117118PP 24:1 10 7.64 1.77 5.04 4.24 5.91 2.79 T046654PP #11/2 T117792FC T116682PP T026196PP T117122PP

NOTE: 1. Stem adapter bushing must be ordered seperately when needed for smaller size valves.

2. All other accessories must be ordered separately. (Sprocket rim, square operator nut, flag indicator & memory stop kit.)

3. Gear operator comes with handwheel.

Visit our website for the most current information.

66

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 8/7/2012

Butterfly Valve Technical Information

Valve Installation Procedure

Always position the connecting pipe flanges accurately in the line, allowing sufficient space between the flanges for the valve. Make sure the pipe flange faces are clean of any foreign material such as scale, metal shavings or welding slag. Valves should be installed with the disc in the closed position to prevent damage to sealing surfaces.

1. Carefully insert the valves between the pipe flanges. Do not apply any lubricants to the seat faces as this may damage them.

2. Line up, center and secure the valve between flanges using desired bolts or studs as listed in Table 4.

Do not tighten bolts at this time.

3. Carefully open the valve to assure free unobstructed disc movement. Disc interference may result when valves are installed in pipelines having

smaller than normal inside diameters, such as heavy wall pipe, plastic-lined pipe, as-cast flanges or reducing flanges. Interference can also occur

when connecting directly to a swing check or silent check. Suitable corrective measures must be taken to remove these obstructions, such as taper

boring the pipe or installing a spacer or spool piece.

4. After proper operation is verified, tighten the bolts using a cross-over pattern (Fig. 1) to the minimum

recommended bolt torques listed in Table 3.

5. Pressurize piping to valve and inspect for leakage. If leakage is observed, tighten bolts using

cross-over pattern, increasing torque until leak stops.

DO NOT EXCEED MAXIMUM TORQUES LISTED IN TABLE 3.

6. Recommended torques are made without warranty. Installer must verify proper strength bolts

for application. Bolts shall be clean and un-lubricated.

Table 3

Flange

Size

Recommended Bolt Tightening Torques

Bolt Minimum Bolt Maximum Bolt

Size Torque (ft.•lbs.) Torque (ft.•lbs.)

2 1/2"- 4" 5/8" 20 70

Caution

1. Class 250 cast iron and Class 300 steel flanges can not be used on these valves.

2. Rubber faced or mechanical flanges are not recommended.

3. This valve is not recommended for steam service.

4. Valves should not be assembled to the flanges and then welded into the piping system.

5. Do not install EPDM liner in compressed air lines.

Bolt Tightening

Cross Over Pattern

5

1

8

Table 4 Recommended Bolt Lengths

3 4

7

2

Fig. 1

6

1000/2000/3000 SERIES ONL

2 1/2"

4"

1.81

3" 1.81

0.69 — — — — 1.50 8/4

— 0.88 — — — 1.75 8/4

0.75 — — — — 1.50 8/4

— 0.94 — — — 1.75 8/4

2.06 0.94 0.94 — — — 1.75 16/8

5/8-11 UNC

5/8-11 UNC

5/8-11 UNC

Suggested

Bolting Method

Resilient Liner Materials

EPDM – EPDM is a terpolymer elastomer made from ethylene-propylene diene monomer. EPDM has good abrasion and tear resistance and offers excellent chemical resistance to a variety of acids and alkalines. It is susceptible to attack by oils and is not recommended for applications involving petroleum oils, strong acids or strong alkalines. EPDM should not be used on compressed air lines. It has exceptionally good weather aging and ozone resistance. It is fairly good in ketones and alcohols.

P roprietary compound formulas are used for each of the elastomers to provide the right combination of seat compression, abrasion resistance and chemical resistance to match your application. Elastomeric seat materials are not suitable for steam service.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

67

A H E A D O F T H E F L O W ® www.nibco.com

Tools, Jaws & Chains

Visit our website for the most current information.

68

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

NIBCO ® Press System Tools

PC-280

1/2" through 4" www.nibco.com

Revised 7/25/2018

MATERIAL LIST

MODEL NO. DESCRIPTION LBS.

PC-280 Pressing Tool with 2 - 18V, 3.0 Ah Lithium-ion batteries, 110V battery charger & case

PC-10S 1/2" Standard Pressing Jaw (for PC-100 or PC-280)

PC-11S 3/4" Standard Pressing Jaw (for PC-100 or PC-280)

PC-12S 1" Standard Pressing Jaw (for PC-100 or PC-280)

PC-13S 1 1/4" Standard Pressing Jaw (for PC-100 or PC-280)

PC-14S 1 1/2" Standard Pressing Jaw (for PC-100 or PC-280)

PC-15S 2" Standard Pressing Jaw (for PC-100 or PC-280)

25.40

PC-16S 1/2"-1 1/4" (4 jaws) Standard Press Jaw Kit w/Case (for PC-100 or PC-280)

PC-17S 1 1/2"-2" (2 jaws) Standard Press Jaw Kit w/Case (for PC-100 or PC-280)

25.25

23.76

PC-2 2 1/2" Pressing Chain w/Case (for PC-100 or PC-280) 18.58

PC-3 3" Pressing Chain w/Case (for PC-100 or PC-280) 19.40

PC-4 4" Pressing Chain w/Case (for PC-100 or PC-280) 23.81

PC-234 2 1/2", 3" & 4" Pressing Chain Kit (for PC-100 or PC-280) 44.42

PC-5 PC-5 Pressing Chain Adapter Jaw

(note: must be used with 2 1/2", 3" & 4" chains) 7.01

4.14

4.18

4.52

4.30

9.61

9.26

PC-7L 18V, 3.0Ah Lithium-ion Battery (for PC-280 or PC-20M) 1.30

PC-8L 110V Battery Charger (for PC-4ML or PC-7L)

PC-9L AC Adapter (for PC-280 or PC-20M)

2.20

1.70

PC-10S thru PC-15S

Standard Pressing Jaws

PC-2 thru PC-4

Pressing Chains

PC-7L

18V, 3.0 Ah

Lithium-ion Battery

PC-280

Pressing Tool

PC-5

Pressing Chain

Adapter Jaw

PC-8L

110V Battery Charger

PC-280C Plastic Replacement Case for PC-280 Tool

PC-2C Metal Replacement Case for PC-2 or PC-3 Chain

PC-4C Metal Replacement Case for PC-4 Chain

PC-234C Plastic Replacement Case for PC-234 Chain Kit

7.50

8.10

8.10

7.72

PC-16SC Metal Replacement Case for PC-16S (1/2" - 1 1/4" Jaws) 8.10

PC-17SC Metal Replacement Case for PC-17S (1 1/2" - 2" Jaws) 4.40

PC-51

1/2" - 2" Deburring Tool

PC-9L

AC Adapter

PC-51 1/2" - 2" Deburring Tool 0.92

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

69

A H E A D O F T H E F L O W ®

NIBCO ® Press System Tools

PC-20M

1/2" through 1"

MATERIAL LIST

MODEL NO. DESCRIPTION LBS.

PC-20M Mini Pressing Tool, 2 - 18V, 2.0 Ah Lithium-ion batteries,

110V charger & case (NO jaws)

PC-200M Mini Pressing Tool, 3 Jaws, 2 - 18V, 2.0 Ah Lithium-ion batteries, 110V charger & case

10.10

17.20

PC-1M 1/2" Jaw (for Mini Pressing Tool - PC-10M or PC-20M) 2.09

PC-2M 3/4" Jaw (for Mini Pressing Tool - PC-10M or PC-20M) 2.05

PC-3M 1" Jaw (for Mini Pressing Tool - PC-10M or PC-20M) 2.07

PC-4ML 18V, 2.0Ah Lithium-ion Battery (for PC-20M) 0.85

PC-7L 18V, 3.0Ah Lithium-ion Battery (for PC-280 or PC-20M) 1.30

PC-8L 110V Battery Charger (for PC-4ML and PC-7L) 2.20

PC-9L AC Adapter (for PC-280 or PC-20M) 1.70

PC-20MC Plastic Replacement Case for PC-10M & PC-20M)

PC-50 1/2" - 1" Deburring Tool

4.00

0.42

www.nibco.com

Revised 7/25/2018

PC-20M

Mini Pressing Tool

PC-200M

Mini Pressing Tool with

1/2", 3/4" and 1" Jaws

PC-1M, 2M, 3M

Mini Pressing Jaws

PC-4ML

18V, 2.0 Ah

Lithium-ion Battery

PC-8L

110V Battery Charger

PC-50

1/2" - 1" Deburring Tool

PC-7L

18V, 3.0 Ah

Lithium-ion Battery

PC-9L

AC Adapter

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Visit our website for the most current information.

70

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ®

NIBCO ® Press System Tools

PC-280 & PC-20M FEATURES

TOOLS

Light weight

PC-20M Mini: 3.7 lbs. (without jaw)

PC-280: 9.4 lbs. (without jaw)

Easy to handle / simple design

Jaws rotate 350°

No calibration necessary

No complicated switches or controls

Mini: Ergonomic compact design is easy to use in tight spaces

Interruptible crimp cycle

Safety feature prevents injuries

Can begin crimp, stop to align and level fitting / tube, and complete crimp

Battery

Can be changed during crimp cycle

Lithium-ion has short charging cycle and larger

capacity

• PC-4ML: 15 minute recharge time

• PC-7L: 22 minute recharge time

AC Power Adapter

Converts the tool to electric power

Allows continuous use

Service light

Illuminates at 10,000 cycles

Tool will not stop operating when light illuminates

• RED indicates battery charge status, service intervals, tool functions & faults

• WHITE illuminates the work area

Hydraulic Pressure Check (HPC)

An audible warning signal sounds if adequate working pressure is not achieved

PRESSING CHAINS (2 1/2" to 4" ONLY)

Uniform crimp

Maintains proper pipe alignment

Easy to install and remove

Once secured to fitting, chain cannot fall off prior to crimp

Chain easily removed post crimp

Crimp Identification

Easy to identify crimp has been made from a distance www.nibco.com

Revised 11/9/2017

PC-100 and PC-10M Accessories

MATERIAL LIST

MODEL NO. DESCRIPTION

PC-7 12V, NiMH Battery - 3.0Ah for PC-100

PC-8 120V Standard Battery Charger for PC-6 or PC-7

PC-4M 1.3 Ah NiCd 9.6V Battery for Mini Pressing Tool

PC-5M 120V Charger for Mini Pressing Tool

PC-100C Metal Case for PC-100 Tool

LBS.

1.57

1.10

0.85

1.13

14.30

PC-4M

9.6V, 1.3 Ah

NiCd Battery

PC-8

120V Battery Charger

PC-7

12V, 3.0 Ah

NiMH Battery

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

71

A H E A D O F T H E F L O W ® www.nibco.com

Revised 5/31/2019

NIBCO ® Press System

Approved Tool and Jaw Compatibility Matrix

Pressing tool, jaw and chain sets are an integral part of ensuring a reliable, permanent connection between NIBCO Press System fittings, valves and copper piping. Only use pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO

Press System fittings and valves.

The following table details compatibility of approved pressing tools, chains and jaws with the NIBCO Press

System fittings and valves:

Standard Pressing Jaws (PC-10S, PC- 11S, PC-12S, PC-13S,PC-14S, PC-15S)

SIZE

NIBCO ® PC-280

NIBCO ® PC-100

RIDGID ® 320-E

RIDGID ® RP 330-B

RIDGID ® CT400

RIDGID ® RP 330-C

RIDGID ® RP 340

Rothenberger ROMAX ® Pressliner

Rothenberger ROMAX ® AC ECO

REMS Akku-Press

REMS Power-Press

Stanley ® VIRAX ® P20+

DEWALT DCE200

NIBCO ® PC-20M Mini

NIBCO ® PC-10M Mini

RIDGID ® 100-B Compact

RIDGID ® RP 210-B Compact

RIGID ® RP 200-B

Rothenberger Compact

Stanley ® VIRAX ® M20+ Compact

Milwaukee ® M12™ Force Logic™

Milwaukee ® M18™ Force Logic

™

1/2” - 1”

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

— — — —

— — — —

— — — —

— — — —

— — — —

— — — —

— — — —

— — — —

— — — —

— — — —

—

—

—

—

— —

YES —

—

—

—

—

— — —

— — —

— — —

YES — —

YES — — YES — —

— YES YES — — —

— YES YES — — —

— YES YES — — —

YES — — YES — —

— —

—

—

—

—

— — YES —

— — — YES

— — — —

—

—

YES

—

—

—

—

—

YES

YES

YES

YES

YES

YES

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

1/2” - 2”

YES YES YES YES YES —

YES YES YES YES YES —

YES

YES

—

—

—

—

—

—

—

—

YES

YES

—

—

—

—

—

—

—

—

YES YES — — — —

YES

YES

YES

—

—

—

—

—

—

—

—

—

—

—

—

— YES — — —

— YES — — —

—

—

—

—

—

—

YES

YES

—

—

—

YES

—

—

—

—

—

— — — — YES

— — — — —

— — — — —

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

— — — —

— — — —

— — — —

— — — —

— — — —

— — — — —

— — — YES —

—

—

—

—

—

For the latest listing of approved pressing tool, jaw and chain combinations, visit nibco.com.

NIBCO recommends minor tool service performed once per year and major service every three years.

For technical or service assistance, contact NIBCO Technical Services 1-888-446-4226.

RIDGID ® is a registered trademark of RIDGID, Inc.

ProPress ® is a registered trademark of Viega GmbH & Co

ROMAX ® is a regis–tered trademark of ROTHENBERGER

VIRAX ® is a registered trademark of Stanley Works

Milwaukee ® is a registered trademark of Milwaukee Electric Tool Corporation

FORCE LOGIC TM is a registered trademark of Milwaukee Electric Tool Corporation

DEWALT ® is a registered trademark of The Black & Decker Corporation

Visit our website for the most current information.

72

CAUTION:

NIBCO press fittings and valves

(2½”, 3”, 4” ends) to be installed ONLY with NIBCO pressing tools & chains.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

2 1/2 ” - 4”

YES

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

YES

—

—

—

A H E A D O F T H E F L O W ® www.nibco.com

Engineering Data

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

73

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press System — Engineering Data

Copper and Copper Alloy Fittings

Standards

O-ring seal joints are not new to the piping industry, but joining techniques like the NIBCO Press System are providing new alternatives for copper piping assembly. NIBCO has relied on its century of experience in copper and brass piping products to design the best performing and most dependable line of fittings possible.

Applications

The NIBCO Press System fittings are designed to join with ASTM B 88 seamless copper water tube in hard drawn/half-hard condition, Type K, L, and M; as well as, with annealed tubing in 1/2", 3/4" and 1" sizes for residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. Copper and copper alloy materials and EPDM elastomeric seals have a long history of compatibility with common chemicals used in these systems. A chemical resistance chart should always be referenced when other fluids are to be introduced.

NOTE: FLUIDS CONTAINING HYDROCARBON-BASED OILS ARE NOT

COMPATIBLE WITH THE EPDM SEAL.

Pressure/Temperature Limitations

-20°F to 250°F up to 200 psiG, non-shock working pressure except where otherwise noted.

Materials:

• Wrot Copper

◆

ASTM B 75 Alloy C12200

• Cast Copper Alloy

◆

ASTM B584-12a Alloy C87600 and C84400

• Elastomeric Seals

◆

EPDM O-rings compliant with IAPMO PS-117 and ASME B16.51

NIBCO ® press fittings meet all performance requirements of

ASME B16.51

Flow area consistent with ASME B16.22

NOTE: Freezing weather precaution — subsequent to testing a piping system, valve should be in an open position to allow complete drainage.

Performance

The following performance tests were conducted per ASME B16.51. The fitting dimensions, materials of construction and performance tests were witnessed and verified by internationally recognized NSF. A letter of verification is available upon request:

1. Dimensional Verification a. Inside diameter of press cup and waterway b. Outside diameter of press cup and waterway c. Wall thickness d. Threaded ends conformance to ASME B1.20.1

2. Hydrostatic Minimum Burst Strength Pressure

a. Fitting samples hydrostatically tested to a minimum of 600 psi

(three times the rated internal working pressure) at 73°F.

3. Unrestrained Hydrostatic Pressure Test at 68°F (20°C) and 200°F (93°C)

a. Fitting assemblies were filled with water and pressurized to 600 psiG at 68° and 200°F for 48 hours.

4. Static Torque

a. Fittings were filled with water, had a minimum torque applied and

released. Each fitting was then pressurized to 400 psiG for

48 hours.

5. Bending Test

a. A sample fitting was installed between two equal lengths of hard-

drawn copper tubing supported six (6) feet apart. A concentrated load was applied to the center of the fitting. The 1/2" thru 2" assemblies were subjected to 600 psiG water pressure and 2-1/2" thru 4" were subjected to 400 psi water pressure for one (1) hour at 68°F (20°C) .

6. Vacuum Pressure Test

a. Fittings were subjected to a vacuum pressure of 24.5 inches of mercury for one (1) hour at 68°F (20°C).

7. Cyclic Pressure Test

a. Fittings were subjected to a hydraulic shock pressure of 400 psiG for 10,000 cycles.

8. Vibration Test

a. Fitting assemblies were subjected to a hydrostatic cyclic vibration test at 400 psiG and 2-1/2" thru 4" were subjected to 400 psi water pressure for 1,000,000 cycles. After cycling, the 1/2" thru 2" assem- blies were pressurized to 600 psiG for 30 minutes and 2-1/2" thru 4" were pressurized to 400 psi for 48 hours.

9. Thermocycling Test a. Test assemblies were constructed using type L copper tube and press connect fittings. The test assemblies were subjected to flowing water at 145 psi cycled between 68°F (20°C) and 200°F

(93°C) for a period of 15 minutes at each temperature for nominal size 2" and smaller. Nominal size 2 1/2" and larger were pressurized with air and immersed in water at 68°F (20°C) and 200°F (93°C).

Cycling continued for 5,000 cycles for sizes 2" and smaller and 2,500 cycles for 2 1/2" and larger size fittings.

10. Dynamic Torque at 68°F (20°C) and 200°F (93°C)

a. Fittings were assembled between two lengths of hard-drawn

copper tubing. With one tube fixed, the other tube twisted ±5° for

10,000 cycles at 68°F (20°C) or 200°F (93°C). Each assembly was

then subjected to 400 psiG water pressure at 68°F (20°C) or 200°F

(93°C) for 1 hour.

Tests were performed with K and M hard drawn tubing. The thermocycle test used L hard drawn tube.

Visit our website for the most current information.

74

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press System — Sample Specification

FITTINGS

2" and Smaller:

Fittings shall comply with NSF 61, CSA, UPC and be approved by the local jurisdiction. The NIBCO Press System may be used at the contractor’s option for the following building services piping - 20°F to +250°F up to

200 psi:

• Hot and Cold Domestic Water

• Potable Water

• Condenser and Chilled Water Service

• Hot Water Heating Service

Wrot copper press fittings shall be made from commercially pure copper mill products per ASTM B 75 Alloy C12200. Cast copper alloy press fittings shall be made from materials with a minimum of 78% copper and a maximum of 15% zinc. The press fittings connections shall be compatible with seamless K, L or M copper tube made to ASTM B 88 as well as 1/2", 3/4" and 1" annealed copper tubing. Fittings shall have a maximum non-shock working pressure of 200 psi between the temperatures of -20°F and +250°F.

Elastomeric seals shall be made of EPDM material, and the fittings shall be manufactured with an inboard bead design. All fittings shall be installed in accordance with the manufacturer’s installation instructions and according to local plumbing and mechanical codes. The press-to-connect joint shall be made with pressing tools and jaw sets recommended and authorized by NIBCO.

2 1/2 " through 4":

Fittings shall comply with NSF 61, CSA, UPC and be approved by the local jurisdiction. The NIBCO Press System may be used at the contractor’s option for the following building services piping - 20°F to +200°F up to

200 psi:

• Hot and Cold Domestic Water

• Potable Water

• Condenser and Chilled Water Service

• Hot Water Heating Service

Wrot copper press fittings shall be made from commercially pure copper mill products per ASTM B 75 Alloy C12200. Cast copper alloy press fittings shall be made from materials with a minimum of 78% copper and a maximum of 15% zinc. The press fittings connections shall be compatible with seamless K, L or M copper tube made to ASTM B 88. Fittings shall have a maximum non-shock working pressure of 200 psi between the temperatures of -20°F and +250°F. Elastomeric seals shall be made of EPDM material, and the fittings shall be manufactured with an inboard bead design. All fittings shall be installed in accordance with the manufacturer’s installation instructions and according to local plumbing and mechanical codes.

The press-to-connect joint shall be made with pressing tools and jaw sets recommended and authorized by NIBCO.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

75

A H E A D O F T H E F L O W ® www.nibco.com

Revised 11/9/2017

NIBCO ® Press System — Sample Specification

VALVES

2" and Smaller Ball Valves: (on/off, isolation or throttling)

Ball valves with male or female press-to-connect ends shall be rated at 200 psi CWP to +250°F maximum. Valves shall be manufactured in accordance with MSS SP-110 and constructed of dezincification resistant cast bronze bodies. No brass containing more than 15% zinc shall be approved. Valve shall have reinforced PTFE seats, blow-out proof stem, full-port ball, chrome/nickel plated ball or 316 SS ball for aggressive water conditions. Where piping is to be insulated, ball valves shall be equipped with 2” extended handles of non-thermal conductive material. Handle to have extended sleeve incorporating an insulation plug to provide a vapor barrier and allow valve operation without disturbing the insulation, and a memory stop, which can be set after installation.

Acceptable Valves: (non-insulated lines):

NIBCO ® PC585-70, PF585-70 or PS585-70

(chrome/nickel plated ball)

NIBCO ® PC585-70-66, PF585-70-66, PS585-70-66 or PCM585-60

(316 SS ball)

Acceptable Valves: (insulated lines):

NIBCO ® PC585-70-NS, PF585-70-NS or PS585-70-NS

(chrome/nickel plated ball)

NIBCO ® PC585-70-66-NS, PF585-70-66-NS or PCM585-60-NS

(316 SS ball)

(Note to Specifier: Include press gate valves in addition/in lieu of press ball valves for ON/OFF and isolation services if requested or required.)

2" and Smaller Check Valves: (Back Flow Prevention)

Check valves (Y pattern, swing type or in-line) with male or female pressto-connect ends shall be rated at 200 psi CWP to +250°F maximum. Valves shall be manufactured in accordance with MSS SP-80. Body and cap to be manufactured of dezincification resistant cast bronze (ASTM B 62 or ASTM

B 584 Alloy C84400). Valves to have PTFE seat disc.

Acceptable Valves:

NIBCO ®

NIBCO ®

PF413-Y or PS413-Y - Y pattern, swing type check valve

PF480-Y or PS480-Y - in-line spring loaded silent check valve

Drain Valves

At all low points in water piping to be drained or vented, provide 1/2” or 3/4" ball valves with male or female press-to-connect ends by hose-end drain valves. Valves shall be rated by 200 psi CWP to +250°F maximum. Valves shall be manufactured in accordance with MSS SP-110. Valves to be constructed of dezincification resistant cast bronze bodies. Valve shall have reinforced

PTFE seats, blow-out proof stem, and be full port. All valves shall be provided with 3/4” hose connection with cap and chain.

Acceptable Valves:

NIBCO ® PS585-70-HC or PF585-70-HC

2" and Smaller Gate Valves: (On/Off and Isolation)

Gate valves with male or female press-to-connect ends shall be rated to 200 psi CWP at +250°F maximum. Valves shall be manufactured in accordance with MSS SP-80. Valve body, bonnet and wedge to be manufactured of dezincification resistant cast bronze (ASTM B 62). Stems shall be of silicon bronze (ASTM B 371) or low zinc alloy (ASTM B 99). Non-asbestos packing and malleable or ductile iron hand-wheel shall be standard.

Acceptable Valves:

NIBCO ®

NIBCO ®

PF111 or PS111 - rising stem gate valve

PF113 or PS113 - non-rising stem gate valve

2 1/2" thru 4" Butterfly Valves: ( On/Off, Isolation or Throttling )

Butterfly valves with female press-to-connect ends shall be rated at 200 psi

CWP to +250°F maximum. Valves shall be manufactured in accordance with

MSS SP-67 and constructed of a ductile-iron body, for bubble-tight shutoff, extended-neck for insulation, disc and lining suitable for potable water, valves shall be suitable for bi-directional dead end service at full rated pressure, one-piece Type 416 stainless-steel stem, copper bushing, fasteners and pins shall not be used to attach stem to disc, no pins or fasteners in waterway, aluminum-bronze disc, and molded-in EPDM seat (liner).

Acceptable Valves:

NIBCO ® PFD2000 series

2" and Smaller Globe and Angle Valves: (Throttling Service)

Globe and angle valves with male or female press-to-connect ends shall be rated to 200 psi CWP at +250°F maximum. Valves shall be manufactured in accordance with MSS SP-80. Valve body, bonnet and wedge to be manufactured of dezincification resistant cast bronze (ASTM B 62). Stems shall be of silicon bronze (ASTM B 371) or low zinc alloy (ASTM B 99). Nonasbestos packing and malleable or ductile iron hand-wheel shall be standard.

Acceptable Valves:

NIBCO ®

NIBCO ®

PF211-Y or PS211-Y - globe valve

PF311-Y or PS311-Y - angle valve

Visit our website for the most current information.

76

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Installation Instructions

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

77

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press System — Installation Instructions

NIBCO Press System

The NIBCO Press System, when used with tested and authorized pressing tools and jaws, is designed to mechanically crimp fittings and valves onto copper tubing to create a watertight, permanent seal. When the switch on the pressing tool is depressed a small hydraulic pump generates thousands of pounds of crimping force to install the specially designed fittings and valves.

System Components

Fittings and Valves

NIBCO Press System copper or bronze fittings and valves

Tubing

ASTM B 88 seamless Hard Drawn Copper Water Tube: Types K, L and M as well as 1/2", 3/4" and 1" annealed copper tubing.

Pressing Tools, Chains and Jaws

The pressing tool, chain and jaw are important parts of ensuring a reliable, permanent connection between NIBCO Press System fittings and valves and the copper water tube.

CAUTION — Use only pressing tools and jaw sets that have been tested and authorized for use with NIBCO Press System fittings and valves (1) . Use of unauthorized pressing tools and/or jaws may result in an improper seal that could cause extensive property damage.

Pressing Tool Safety

• Only use authorized pressing tools and jaws with NIBCO Press System fittings and valves. Other uses or modification of the jaws for other applications may damage the press tool, damage the jaws and/or cause personal injury.

• Keep fingers and hands away from jaws during pressing cycle. Your fingers or hands can be crushed, fractured or amputated if they become caught between the jaw tips or between the jaw and any other object.

• Always wear safety glasses while using pressing tools and jaws.

• Never attempt to repair a damaged jaw set. A jaw that has been modified in any manner can fail during crimping resulting in serious injury. Discard the entire damaged jaw set. Replace with a new jaw set.

WARNING: Please read these installation instructions and the manufacturer's pressing tool and jaw operators manual(s) carefully prior to installation of the NIBCO Press System. Failure to understand and follow the contents of this manual may result in extensive property damage, severe personal injury or death.

Please contact NIBCO Technical Services at 888.446.4226 if you have installation questions.

(1) See approved tool and jaw compatibility matrix in this catalog.

Chemical Compatibility

Please consult the most current edition of the NIBCO Chem-Guide for recommendations regarding chemical compatibility of material exposure to specific media and media-treatment additives. The NIBCO Chem-Guide is a general guide on the topic of chemical compatibility and is by no means an exhaustive resource on the subject. Ultimately, proper material selection is the responsibility of the installer and/or end-user, taking into account all aspects of a system’s design and intended use.

Galvanic Potential in Piping Systems

Galvanic corrosion or dissimilar metal corrosion is an electrochemical process that is created through the electrical interaction of two different metals under the influence of a conductive media (i.e. an electrolyte). An electrolytic cell, much like a battery, is generated by these dissimilar metals using water as the electrolyte.

The electrical charge, developed within the electrolytic cell, drives a preferential attack on the more electrically active metal with the water acting as the recipient of the discarded metal ions. Such galvanic attack is often encountered in service where iron or steel components are installed, and later corrode, in a largely copper piping system. Please consult NIBCO Technical Bulletin NTB-0714-01 Dielectric Products Relative to Electrolysis and Galvanic Corrosion.

Visit our website for the most current information.

78

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 11/9/2017

NIBCO ® Press System — Installation Instructions

Installation Instructions for 1/2" - 2"

Press Fittings and Valves

WARNING:

To prevent serious injury, inspect the pressing tool, battery charger (if applicable) and jaw sets according to the procedure outlined in the pressing tool instruction manual prior to beginning installation.

Failure to clean jaws can result in an improper connection that can lead to extensive property damage.

Preparing the Copper Tube

1. Select clean, undamaged copper tube and cut to desired length. Cut tube end square using a tube cutter or fine-toothed saw. Do not crimp over damaged, scratched, gouged, or otherwise damaged tubing ends. Do not crimp over etch print streams on tubing. (Figure 1).

Figure 3 — Marking for Insertion Depth

2. Mark the tube with a permanent marker to indicate the proper tube insertion depth (Figure 3) .

3. Refer to the minimum insertion depth table for correct depths

4. Insert the tube into the fitting or valve using a twisting motion. Make sure that the tube is fully inserted into the fitting stop or shoulder.

Figure 1 — Cut tube to desired length

2. Deburr the tube inside and outside diameter using a half-round file or a deburring tool.

3. Clean the tube end of all dirt, oil and grease. (Emery cloth or sandpaper to clean the tube or remove oxidation should not be used .)

Inserting the Tube into the Fitting or Valve

1. Check the fitting to make sure the EPDM seal is in place, clean and free of dirt and debris (Figure 2) .

Tube Size

Inches

1/2

3/4

1

1 1 ⁄

4

1 1 ⁄

2

2

Insertion Depth (min.)

Inches

11/16

7/8

7/8

1

1 3 ⁄

8

1 1 ⁄

2 mm

18

22

22

25

35

38

CAUTION: Tubing that is difficult to insert may have burrs or could be out-of-round. Burrs must be removed and tubing end must be undamaged.

Make sure tube is inserted to the proper depth. Failure to do so may result in an improper seal.

Attaching Pressing Jaws

1. Make sure the battery is removed or the cord is unplugged on the pressing tool prior to attaching or changing the crimp jaws.

2. Push and twist to open the jaw set mounting pin. (Figure 4) .

Figure 2 — Check for EPDM Seal

WARNING: Never lubricate the EPDM seal in the NIBCO Press System fitting or valve with anything other than water. Oil-based lubricant, dirt or debris may damage the seal. An improper seal can lead to extensive property damage.

Figure 4 — Pushing and twisting to open the jaw set mounting pin

3. If press tool contains a jaw set, slide it out of the crimping tool.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

79

A H E A D O F T H E F L O W ® www.nibco.com

Revised 11/9/2017

NIBCO ® Press System — Installation Instructions

4. Select the jaw set that corresponds to the size of the joint to be crimped and insert the jaw set into the pressing tool (Figure 5) .

Figure 5 — Inserting the NIBCO Press System jaw

5. Push the jaw set mounting pin until it clicks into position.

NOTE: The tool will not properly press unless the pin is fully engaged.

Crimping a NIBCO Press System Fitting or Valve

1. Make sure the tubing is inserted to the proper depth in the fitting.

(Figure 6).

Figure 6 — Inserting the tube to proper depth

2. Squeeze jaw arms to open the jaw set.

3. Place the open jaws around the fitting and ensure that the contour of the jaw is properly aligned with the contour of the fitting (Figure 7) .

Figure 8 — Jaw set should be square to tubing

5. Once the crimp is complete, press the jaw arms to open the jaw and remove from the fitting.

If the tool displays an LED flash or emits an audible alarm, please refer to the tool instruction manual for troubleshooting suggestions.

CAUTION Avoid handling sharp edges that may have formed on the fitting during the crimping operation.

Inspecting the Crimp

1. Inspect the crimped fitting to ensure proper crimp.

NOTE: The use of the NIBCO Press System jaw will produce a unique witness mark “N” on the crimped fitting.

2. Inspect the crimped fitting checking the connection for the following problems:

• Not fully inserted tube, double check depth marks

• Incorrect jaw alignment with the fitting contour

If any problems are found, a new section of tubing and a new fitting will need to be prepared, installed and crimped.

3. Test the NIBCO Press System in accordance with crimp intergrity testing instructions for fittings and valves in this catalog.

Figure 7 — Open the jaw set and place around the fitting

4. Make sure the tool is perpendicular to the tubing and depress the switch

(Figure 8) . Keep the trigger depressed from the time the cycle begins and the rollers contact the jaw arms until the end of the entire crimp cycle.

Visit our website for the most current information.

80

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 11/9/2017

NIBCO ® Press System — Installation Instructions

Installation Instructions for 2 1/2" - 4"

Press Fittings and Valves

WARNING : To prevent serious injury, the pressing tool, battery charger

(if applicable) and pressing chains should be inspected according to the procedure outlined in the pressing tool instruction manual prior to beginning installation.

Failure to clean pressing chains can result in an improper connection that can lead to extensive property damage.

Preparing the Copper Tube

1. Select clean, undamaged copper tube and cut to the desired length. Cut tube end square using a tube cutter or fine-toothed saw. Do not crimp over damaged, scratched, gouged, or otherwise damaged tubing. Do not crimp over etch print streams on tubing (Figure 1).

Figure 4: Deburr outside diameter using a half-round file

4. Clean the tube end of all contamination, oils and shavings. A smooth transition chamfer is recommended to ease tube insertion past the seal. (Emery cloth or sandpaper to clean the tube or remove oxidation should not be used .)

Inserting the Tube into the Fitting or Valve

1. Check the fitting to make sure that the seal is in place and is free of oil or grease. Only original NIBCO ® EPDM seals are to be used when making a press connection with NIBCO Press System fittings and valves. If it is necessary to lubricate the seals, use water only. DO NOT use any petroleum-based lubricants (Figure 5) .

Figure 1: Cut tube to desired length using s tube cutter

2. Deburr the tube inside diameter using a half-round file or deburring tool.

Remove any copper shavings or filings (Figures 2 & 3) .

Figure 2: Deburr inside diameter using a half-round file

Figure 5: Check for EPDM seal

WARNING: Never lubricate the EPDM seal in a NIBCO Press System fitting or valve with anything other than water. Oil-based lubricants, dirt or debris may damage the seal. An improper seal can lead to extensive property damage.

2. Mark the proper insertion depth on the tube with a permanent marker prior to insertion, based on insertion depth chart. Refer to minimum insertion depth table for correct depths.

Tube Size 2 1 /

2

” 3” 4”

Insertion Depth (min.)

NIBCO ® Press System

Insertion Depth Chart

1 1 /

2

” 1 5 /

8

” 2 1 /

8

”

Figure 3: Deburr inside diameter deburring tool

3. Deburr the tube outside diameter using a half-round file to prevent damage to the EPDM seal (Figure 4) .

3. Insert the tube into the fitting or valve using a twisting motion. Make sure that the tube is fullly inserted into the fitting or valve.

WARNING: If tube is not inserted to the proper depth, an inadequate seal may result.

CAUTION: Tubing that is difficult to insert may have burrs or could be out-of-round. Burrs must be removed and tubing end should be undamaged.

Make sure tube is inserted to the proper depth. Failure to do so may result in an improper seal.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

81

A H E A D O F T H E F L O W ® www.nibco.com

Revised 11/9/2017

NIBCO ® Press System — Installation Instructions

Crimping a NIBCO Press System Fitting or Valve

CAUTION:

NIBCO press fittings and valves

(2½”, 3”, 4” ends) to be installed ONLY with:

• NIBCO PC-100 and PC-280 pressing tools

• NIBCO PC-5 adapter jaw

• NIBCO pressing chain - 2½” (PC-2),

3” (PC-3), 4” (PC-4)

1. Make sure that the battery is removed or that the cord is unplugged on the pressing tool prior to attaching or changing the adapter jaw.

2. Select the correct size pressing chain. Pull the pin on the chain which allows the segments to open. Position the chain on the raised bead and wrap the chain around the fitting with the "pipe side" designation facing the tube. When the chain is fully wrapped around the fitting, reinsert the pin to secure the chain on the assembled joint. Visually inspect the mark made for insertion depth, to ensure the tube remained in position (Figure 6) .

Figure 8: Placement of adapter jaw into pressing chain

5. Make sure the tubing is inserted to the proper depth in the fitting or valve, and that the tube and fitting or valve are aligned properly.

6. With the pressing tool perpendicular to the tube, begin the pressing cycle by pulling the trigger of the pressing tool.

7. Keep the trigger depressed from the time the cycle begins and the rollers contact the jaw arms until the end of the entire cycle. Remove the pressing tool and adapter jaw from the pressing chain. Remove the pressing chain from the fitting.

If the tool displays an LED flash or emits an audible alarm, please refer to the toolinstruction manual for troubleshooting suggestions.

CAUTION: Avoid sharp edges that may have formed on the fitting during the crimping operation.

Inspecting the Crimp

1. Inspect the crimped fitting or valve to ensure proper crimp. The final crimp should appear pressed uniformly around the fitting or valve (Figure 9) . Figure 6: Placement of the pressing chain onto fitting or valve

3. Release the pin (push and twist) on the jaw holder of the pressing tool, and install the adapter jaw on the tool. Return the pin to its original position, securing the jaw. The red sleeve on the tool must be in the back position to allow for crimping sizes 21/2”, 3” and 4” (Figure 7) .

Figure 7: Placement of adapter jaw into the tool

4. Squeeze adapter jaw arms to open the jaw. Rollers must be fully retracted to open the adapter jaw. Place the open adapter jaw into the grooves in the pressing chain and let go of the jaw arms (Figure 8).

Figure 9: Inspection of final crimp

NOTE: The use of the NIBCO Press System chain will produce a unique witness mark “N”.

2. Inspect the crimped fitting checking the connection for the following problems:

• Not fully inserted tube, double check depth marks

• Incorrect chain alignment with the fitting contour

If any problems are found, a new section of tubing and a new fitting will need to be prepared, installed, and crimped.

3. Test the NIBCO Press System in accordance with crimp integrity testing instructions for fittings and valves in this catalog.

Visit our website for the most current information.

82

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 2/28/2020

NIBCO ® Press System — Crimp Integrity Testing

Instructions for Fittings & Valves

PRESSURE TESTING:

NIBCO recommends the following leak testing procedures when installing NIBCO Press System with the leak detection feature. These test procedures allow the installer to find un-pressed connections while the system is being tested under pressure.The uniquely designed EPDM o-ring allows fluids or gases to flow past the seal and leak when the fitting has not yet been pressed. When the fitting has been pressed, the o-ring will create a water tight seal around the tube.

AIR LEAK TESTING:

1. Pressurize system up to 15 psi maximum using dry, oil free compressed air, carbon dioxide, or nitrogen.

2. Allow system pressure to stabilize for a minimum of 2 hours.

3. If system pressure has dropped, add more air to bring entire system up to 15 psi maximum. If system pressure increases above 15 psi, bleed off excess pressure to ensure system is at a maximum pressure of 15 psi.

4. If the system pressure continues to drop, inspect all joints for un-pressed fittings. The NIBCO Press System press fittings with the leak detection feature are designed to leak in an un-pressed condition.

5. Check all press joints for air leaks using a commercially available leak test solution or a soap and water mixture. Do not use a soap that contains Mineral

Spirits or a Hydrocarbon/ petroleum that might attack the EPDM O-rings.

6. Once the system has been confirmed to be leak free, pressure can be increased to the recommended working pressure to verify system integrity.

WATER LEAK TESTING:

1. Pressurize system up to 50 psi maximum using potable water.

2. Allow system pressure to stabilize for a minimum of 2 hours.

3. If system pressure has dropped, add more water to bring entire system up to 50 psi maximum. If system pressure increases above 50 psi, bleed off excess pressure to ensure system is at a maximum pressure of 50 psi.

4. If the system pressure continues to drop, inspect all joints for un-pressed fittings. The NIBCO Press System press fittings with the leak detection feature are designed to leak in an un-pressed condition.

5. Check all press joints for leaking water.

6. Once the system has been confirmed to be leak free, water pressure can be increased to the recommended working pressure to verify system integrity.

SYSTEM INTEGRITY TESTING*:

Once a system has been confirmed to be properly installed and no press connections have been left uncrimped , the system is recommended for testing up to the maximum non-shock working pressure of 200 psi hydrostatic.

NOTE: While NIBCO Press System products are tested to pressures as high as 600 psi, the product system rating limitation of 200 psi is in place to ensure a safety factor of three-times proof-testing according to ASME B16.51 Copper and Copper Alloy Press-Connect Pressure Fittings.

SYSTEM INTEGRITY TESTING AT HIGHER PRESSURES*:

NIBCO Press System products can be tested at hydrostatic pressures higher than 200 CWP, not exceeding a maximum pressure of 300 psi hydrostatic for a maximum test duration of 24 hours, when assembled and tested according to the methods prescribed above.

CAUTION: These testing parameters and protocols apply only to NIBCO products as detailed above: NIBCO accepts no responsibility or liability for any other manufacturer’s products that may be damaged as a result of such testing.

*System integrity testing applies to leak detect and non-leak detect fittings and valves.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

83

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press System — Installation Instructions

Minimum Distance Between Joints

To prevent distortion of the tubing, certain fitting sizes require a minimum distance between crimp joints (refer to Chart 1 below). Failure to provide this minimum distance may result in an improper seal.

Spacing

1. Sufficient clearance must be left around each joint to allow room for the pressing tool and jaw to be attached without interference.

Clearance Requirements — Standard Jaw Sets

Tool perpendicular to wall

A (min.)

Tube Dia. Inches mm

1

3

2

⁄

⁄

2

4

1 ⁄

2

"* 0 0

1 ⁄

"* 0 0

"* 0 0

1"*

1

1

1 ⁄

4

"* 0 0

2"*

2

"

3"

4"

3

3

3 ⁄

0

8

0

" 10

⁄

0 0

⁄

8

" 10

8

" 10

*No minimum distance required.

Tube Dia.

1 /

2

3 /

4

1

1 1 /

4

1 1 /

2

2

15

1

1

7

1

1

/

/

16

2

2

/

/

8

A (min.) B (min.)

Inches mm Inches mm

4

8

24

22

31

29

51

51

1 5 /

8

2 1 /

8

2 1 /

2

2 7 /

8

4 3 /

8

4 3 /

8

41

54

64

73

111

111

Tool angled to wall

System Support

CAUTION — In any installation, the system should be suported to ensure the minimum stress is imposed on the tube and joints. The NIBCO Press

System should be supported in accordance with normal practice and to local jurisdiction piping code.

Softening of Copper Tubing

A NIBCO Press System installation should not be conducted within 12" of a brazed joint. The high temperature required for capillary joinery may cause the copper tube to become annealed and render it too soft for proper crimping. However, a NIBCO Press System product may be crimped adjacent to a soldered joint, as normal temperatures created by silver soldering are not hot enough to cause the copper tube to become annealed.

CAUTION — Brazing or soldering should not be conducted within 12" of an existing NIBCO Press System connection as this may damage the EPDM seal. If there is any concern about heat damage to the O-ring, a cold, wet cloth should be wrapped around the crimped connection prior to soldering or brazing.

Tube Dia.

1

1

1 /

2

3 /

4

1 /

4

1

1 1 /

8

28 1 3 /

8

35 2 1 /

2

64

1

3

5

1

5

1

/

/

/

A (min.) B (min.) C (min.)

16

4

8

26 1 1 /

2

38 2 1 /

2

64

34

32

92

1

2

3

1

6

/

/

4

4

45 3

57 3 1 /

8

76

80

1 1 /

2

2 1 /

8

54 3 1 /

8

80 5 127

2 1

2

3

4

/

2

2 1 /

8

54 3 1 /

8

80 5 127

152 3 1 /

2

89

3 7 /

8

98 6 1 /

2

165 4 102

4 7 /

8

124 7 5 /

8

194 4 1 /

4

108

NOTE: Clearance dimensions for 2 1 chains around fittings.

/

2

", 3" & 4" are for wrapping pressing

Visit our website for the most current information.

84

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

A H E A D O F T H E F L O W ® www.nibco.com

Revised 9/17/2019

NIBCO ® Press System — Frequently Asked Questions

What is the NIBCO product offering?

The NIBCO Press System features a full range of copper and copper alloy fittings, commercial valves, accessories and pressing tools, jaws and chains for use with K, L and M copper water tube as well as 1/2", 3/4" and 1" annealed copper tubing.

What is the system temperature rating?

The NIBCO Press System is rated at 200 psiG over a temperature range of -20°F to 250°F.

What are the approved system applications?

Approved applications include residential and commercial potable, hot, chilled and process water for plumbing and HVAC systems.

The NIBCO Press System is designed for use with water glycol mixtures of ethylene or propylene glycol up to 50% at 200°F.

What was the testing protocol for the NIBCO Press System fittings and valves?

NIBCO Press System fittings and valves were subjected to a wide range of performance tests including dimensional verification, thread end specification, hydrostatic burst strength, unrestrained pressure, static torque, bending, vacuum pressure, cyclic pressure, vibration, thermo-cycling and dynamic torque. The testing protocol included testing to a 3X safety factor above the 200 psiG system rating.

NIBCO testing was witnessed and validated by the internationally recognized NSF.

Can other available pressing tools and jaws be used on the NIBCO Press System?

See our Approved Tool and Jaw Compatibility Matrix for a complete listing of approved tools and jaws.

Can a NIBCO Press System connection be re-crimped?

If for any reason the press cycle is interrupted, it is possible to re-crimp a NIBCO Press System connection. However, when re-crimping the connection, the jaws must be properly aligned so that the crimp is performed in the same location as the original.

How long will the EPDM seal last?

Accelerated life tests show that the EPDM seals used with the NIBCO Press System fittings and valves have a life expectancy of 50 years.

Are NIBCO Press System fittings available with solder or threaded by Press System connection?

NIBCO offers many Press System fitting combinations by soldered or threaded connection. Please note, always solder the standard wrot connection first when possible. Prior to soldering, remove the press end EPDM o-ring, solder, allow the fitting to cool, insert the EPDM O-ring, and then Press the connection.

Can a fitting be soldered close to a Press System connection?

NIBCO recommends soldering at least 12 inches away from the Press System connection. If this length is not possible, either solder the joint prior to connecting the press fitting or wrap the connection with a cold wet cloth.

Is the NIBCO Press System approved for underground use?

In accordance with local plumbing codes, the NIBCO Press System can be installed underground.

Is the NIBCO Press System compatible with standard disinfectant cleaning agents commonly utilized in a new water system?

Yes, the NIBCO Press System is typically compatible. For specific cleaning agent compatibility, contact NIBCO Technical Services at the below noted number.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

85

A H E A D O F T H E F L O W ®

Notes www.nibco.com

Visit our website for the most current information.

86

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

www.nibco.com

A H E A D O F T H E F L O W ®

NIBCO ® Press System Limited Warranty

NIBCO INC. warrants:

• NIBCO Press System fittings and flanges to be free from defects in materials and workmanship under normal use and service for a period of 50 years from the Warranty Commencement Date. The Warranty Commencement Date for

NIBCO Press system fittings and flanges shall be the date upon which the fitting or flange is installed.

• NIBCO Press System pressure rated metal valve to be free from defects in materials and workmanship under normal use and service for a period of five (5) years from date put into service with the exception of models PC-FP-600A-LF for which a two (2) year warranty period from date put into service applies.

This limited warranty applies to all NIBCO Press System products installed in accordance with NIBCO’s approved and published installation, testing and application recommendations and instructions. This includes product installed in accordance with the

Press Tool & Jaw Compatibility Matrix in effect at the time of installation as published in the most current online version of the

NIBCO Press System Catalog.

NIBCO does NOT warrant against failure of NIBCO Press System fittings, flanges and valves (referred to hereafter as “product”) for:

1. any product, parts or systems which are not manufactured or sold by NIBCO, INC.;

2. any product which is used for purposes other than a purpose authorized by NIBCO INC.;

3. any product not installed in accordance with either the recommended installation guidelines provided by NIBCO INC. and/or applicable plumbing codes;

4. damage to the product caused by, contributed in whole or in part by, or resulting from, any of the following: a. abuse, misuse, mishandling, tampering, neglect or accidental damage such as, without limitation, vandalism b. natural disasters, such as, without limitation, flooding, windstorm and lightning c. attachments or modifications to the product that are not authorized by NIBCO INC.

d. external causes, where external, physical or chemical qualities produce damage to the product, such as, without limitation, variation in water quality, aggressive water or an unsuitable or hostile environment, or e. any other cause beyond the control of NIBCO INC.

NIBCO shall NOT be liable under any circumstances for any other direct or indirect, incidental or consequential damages of any kind, including but not limited to loss of business, lost profits, mold intrusion, water damage, etc. The liability of NIBCO under this warranty is solely limited to the replacement of any product that has been determined by NIBCO INC., or an authorized representative or agent thereof, to contain a defect in material or workmanship.

NIBCO Press System tools are covered by a limited warranty against defects in material or manufacturing for a period of two

(2) years from date of purchase by the contractor. This limited warranty covers the repair or replacement of the tool, at NIBCO’s discretion, if NIBCO has received the tool, inspected it, and the tool is found to be defective.

This warranty is the only warranty for the product provided by NIBCO INC., and is and shall be in lieu of any and all other warranties, expressed or implied, including but not limited to an implied warranty of merchantability, and for all other obligations or liabilities on the part of the Manufacturer. No employee of NIBCO INC., or any other distributor, agent or other person or business, is authorized to make any other warranty on behalf of NIBCO, INC.

In the event any defect occurs which is believed to be covered by this warranty, NIBCO Technical Services should be immediately contacted either in writing or by telephone at 888.446.4226. NIBCO Technical Services will make further arrangements for the product’s return to NIBCO INC. for review and evaluation. In the event that a returned product is determined by

NIBCO INC. to be defective, NIBCO INC. will remediate the failure by repairing or replacing the product within a reasonable time, without charge to the owner of the product.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

To the best of our knowledge, the information contained in this publication is accurate. However,

NIBCO does not assume any liability, whatsoever for the accuracy or completeness of such information. Final determination of the suitability of any information or product for the use to be contemplated is the sole responsibility of the user. The manner of that use, and whether there is any infringement of patents, is also the sole responsibility of the user.

Visit our website for the most current information.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

87

A H E A D O F T H E F L O W ® www.nibco.com

Revised 11/9/2017

How to Order

State quantity, figure number and size for each valve you wish to order. See individual valve catalog pages for specific or special product designations.

HOW MANY TO ORDER

NIBCO valves are decimal packed for your convenience in handling, shipping and stock-keeping. Number in master carton varies with item.

POLICY ON RETURNS TO FACTORY

NO NIBCO valves are to be returned without prior written agreement.

Transportation must be prepaid. A 20% charge will be made to cover cost of rehandling and reinspection.

TECHNICAL ASSISTANCE

Engineers, contractors, wholesalers or manufacturers may obtain special or technical assistance from any factory representative of NIBCO. Write, fax or phone.

NIBCO INC.

World Headquarters

1516 Middlebury Street

Elkhart, IN 46516-4740

USA

Phone: 1.574.295.3000

Fax: 1.574.295.3307

Technical Service Phone: 1.888.446.4226

Fax: 1.888.336.4226

To the best of our knowledge, the information contained in this publication is accurate. However, NIBCO does not assume any liability whatsoever for the accuracy or completeness of such information. Final determinations of the suitability of any information or product for the use to be contemplated is the sole responsibility of the user. The manner of that use, and whether there is any infringement of patents, is also the sole responsibility of the user.

88

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

globally

connecting

you at all levels

It’s a new age of business, and a new way at NIBCO.

From Elkhart, Indiana to

Lodz, Poland, and points beyond, our company has integrated manufacturing, distribution, and networked communications to provide a seamless source of information and service,

24 hours a day, 7 days a week. But this integration hasn’t happened overnight.

It’s been part of a longterm strategic process that has pushed us to reconsider every aspect of our business. The result? We’re a vertically integrated manufacturer with the products and systems in place to deliver low cost and high quality. NIBCO products are manufactured under a Quality Management

System conforming to the current revision of ISO-9001

International Standards.

We know the flow control industry is only going to get more demanding, and we are more than ready. We will continue to lead. That’s what NIBCO is all about.

World

Headquarters

Elkhart,

Indiana

M A N U F A C T U R I N G D I S T R I B U T I O N I N T E R N AT I O N A L

Metal Valves and Fittings

Plastic Pipe,

Valves, and Fittings

Industrial

Plastics

International U.S. Distribution

Centers

Global Offices

*

Blytheville,

Arkansas

McAllen,

Texas

*

Greensboro,

Georgia

*

Goshen,

Indiana

*

Lebanon,

Ohio

*

Charlestown,

Indiana

Reynosa, Mexico

*

Lodz, Poland

Elkhart, Indiana Elkhart, Indiana

Lodz, Poland

Nacogdoches,

Texas

*

Stuarts Draft,

Virginia

Worcester,

Massachusetts

*Denotes U.S. and International Direct Shipping Locations

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH:1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

VALVES

Pressure-rated bronze, iron and alloy-iron gate, globe and check valves • Pressurerated bronze ball valves • Boiler specialty valves • Commercial and industrial butterfly valves • Lined butterfly valves • Circuit balancing valves and kits •

Carbon and stainless steel ball valves • ANSI flanged steel ball valves • Lined ball valves • Pneumatic and electric actuators and controls • Grooved ball and butterfly valves • High performance butterfly valves • UL/FM fire protection valves

• MSS specification valves • Bronze specialty valves • Low pressure gate, globe, check and ball valves • Frostproof sillcocks • Quarter-turn supply stops • Quarterturn low pressure valves • PVC and CPVC plumbing and industrial ball valves •

Bronze and iron y-strainers • Sample valves • Sanitary valves • Lead-free valves

• Hydronic valves • Labor saving valves • Manifold systems • Water temperature control valves • System quality valves • Press x PEX transition valves

F I T T I N G S

Wrot and cast copper pressure and drainage fittings • Cast copper alloy flanges •

Powder coated steel companion flanges • Wrot and cast press fittings • ABS and

PVC DWV fittings • Schedule 40 PVC pressure fittings • CPVC CTS fittings • CPVC

CTS-to-metal transition fittings • Schedule 80 PVC and CPVC systems • Lead-free fittings • Press x PEX transition fittings • Cast bronze push fittings

LEAD-FREE: Weighted average lead content ≤ 0.25%

FLEXIBLE PIPING SYSTEMS

PE-RT and PEX tubing for potable and radiant applications • Insulated tubing •

Risers • Ice maker tubing • Silicon Performance Bronze

®

fittings • Poly alloy fittings

• Home Run Manifold

®

• Radiant heat manifolds • Ball valves and supply stops •

Connections, tools and accessories • Radiant heat controls and panels

INDUSTRIAL PLASTICS

PVC and Corzan

®

CPVC schedule 80 fittings, true union ball and ball check valves, butterfly valves, and specialty valves • Polypropylene and Kynar

®

PVDF schedule 80 pipe, fittings, and true union ball and ball check valves • Pneumatic and electric actuation systems

Corzan

®

are registered trademarks of the Lubrizol Corporation

Kynar

®

is a registered trademark of Arkema Inc.

eNIBCO

EDI—Electronic Data Interchange • VMI—Vendor Managed Inventory •

NIBCO.com • NIBCOpartner.com

C-NPS-0720

N I B C O I N C .

W O R L D H E A D Q U A R T E R S

W E B : w w w . n i b c o . c o m

1 5 1 6 M I D D L E B U R Y S T R E E T

E L K H A R T, I N 4 6 5 1 6 - 4 7 4 0

U S A

D O M E S T I C C U S T O M E R S E R V I C E

P H O N E : 8 0 0 . 2 3 4 . 0 2 2 7

F A X : 8 0 0 . 2 3 4 . 0 5 5 7

T E C H N I C A L S E R V I C E

P H O N E : 8 8 8 . 4 4 6 . 4 2 2 6

F A X : 8 8 8 . 3 3 6 . 4 2 2 6

I N T E R N AT I O N A L O F F I C E

P H O N E : + 1 / 5 7 4 . 2 9 5 . 3 3 2 7

F A X : + 1 / 5 7 4 . 2 9 5 . 3 4 5 5

C-NPS-0720-R072320 © 2020 NIBCO INC., All Rights Reser ved. Printed in U.S.A.