MUSTEE 390.304 CareGiver 34 in. x 1-1/2 in. Stainless-Steel Concealed-Screw Grab Bar Specification
Advertisement
Advertisement
CareGiver ® Model 390 Series
1-½” Inside Corner-Style Safety Grab Bars
Design features:
Smooth stainless steel, 18 gauge tubing, satin finish, 1-½” diameter
Exclusive, Twist-Lock concealed flange snaps into place for a secure, tamper-proof mounting
Stainless steel mounting flange is Heliarc welded to the tube to form a single, high strength structural unit that cannot be separated
All bars have a nominal offset distance of 1-½” (38mm)
Flat contact surface won’t cut or mar wall surfaces – bar remains stable without further tightening
304 Stainless steel mounting flange, 14 gauge
Tested to withstand 500 lbs. of downward load...when properly installed
Code Accepted
CareGiver® Grab Bars meet or exceed performance requirements:
American National Standards Institute (ANSI) A117.1
Meets or exceeds HUD, FHA, VA, ADA and other Federal/local codes
Specifications:
Model No.
390.304
390.303
Smooth finish
AxB
34" x 18"
42" x 20"
UPC
6 71031 00000 0
6 71031 00000 0 A
12
"
B
General: Furnish and install as shown on plans, Inside Corner-Style Safety Grab Bar model
_____, as provided by E.L. Mustee & Sons, Inc. measuring ___x___ with Twist-Lock concealed flange shall be 1-½” diameter, 18 gauge, type 304 stainless steel tubing. 14 gauge stainless steel mounting flange shall be Heliarc welded to the tube to form a single structural unit. Grab bar shall comply with applicable building codes. Meets ANSI A117.1
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: 216.267.3100 • Fax: 216.267.9997
E-mail: [email protected]. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.

Public link updated
The public link to your chat has been updated.
Advertisement