- Labo America, Inc.

- Labo America, Inc.
Part No:6169000-795
Issue on 1.0
Printed on May, 2013
User’s Manual eVA 500 / 500D COLPOSCOPE
List of Contents
1.
Introduction
2
2.
Warning & Caution/Warning labels/Intended use
5-8
3.
Condition of material at time of supply
9
4.
Installation Instructions (Fig. 1)
10
4.2
4.3
4.4
Mounting of Appliance (Fig. 2.1, 2.2, 2.3)
Special instructions
Additional load
11
12
12
5.
Measures& Weight (Fig. 3)
13
6.
Electric Connections (Fig. 4)
Electrical connections
Changing of Fuse
14
14
7.
Operating Instruction/Control Elements (Fig. 5)
15-16
8.
Description of parts (Fig. 7.1 & 7.2)
9.
Instructions for using the Microscope
a)
Adjustment of Interpupillary distance (Fig. 8)
b)
Changing the magnification (Fig. 9)
c)
How to focus the Object (Fig. 9.1)
d)
Red free image observation (fig. 9a)
d)
Eyepieces with Diopter Locking Facility (Fig. 9.2)
e)
Aperture Settings for the Colposcope (Fig. 9.3)
19
20
21
22
23
24
10.
Changing the Binocular Tube (Fig. 10)
26
11.
Changing the Objectives & Eyepieces (Fig. 11)
26
12.
Care & Maintenance (Fig. 12)
27-29
17-18
13.
Ambient Requirement
30
14.
Disposals
30
15.
Technical Specifications
1 31
Issue 1.0 6169000‐795 eVO 500/500D Printed on July, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
1.
INTRODUCTION
Congratulation on the purchase of your new eVA 500 / 500D COLPOSCOPE.
This instruction manual is designed as a training and reference manual for the operation and
maintenance of the instrument. We recommend that you read it carefully prior to use and follow the
instruction to ensure optimum performance of your new instrument.
Please retain this manual for future reference and to share with other users. Additional copies can be
obtained from our authorized LABOMED dealer of from the LABOMED service department. Contact
information is provided at the end of this guide.
LABOMED eVA 500 / 500D COLPOSCOPE is an optical instrument used in a medical diagnostic procedure
to examine Cervix, Vaginal and Vulva tissue with the aid of illumination techniques and optical stereo
microscope.
A Colposcope provides an enlarged view of area of interest and allows visual distinguishing of normal and
abnormal appearing tissues and also as an aid of taking direct biopsies for further pathological
examination.
It is also used for visual examination of Cytological abnormality as well as assessment of Diethylstilbestrol
exposure in-utero, Immunosuppression such as HIV, abnormal appearance of the Cervix and forensic
examination of a sexual assault wherein, a Colposcope fitted with a camera is of great benefit for the
purpose of image capturing.
2 Issue 1.0 6169000‐795 eVO 500/500D Printed on July, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
With E50 Stand: Provided with EzTM-lift mechanism for easy and accurate positioning. It has total
vertical travel of 125 mm (100 mm coarse positional travel and 25 mm fine positional travel). Control knob helps user in achieving the desired height by slight loosening the swivel arm locking knob
and then re-clamp after getting the required height.
Ez lift knob is used for fine & perfect position of colposcope to view the desired field with comfort & ease
of both user and patient. It has a total fine adjustment travel of 25 mm.
Eyepiece
Eyepieces
IPD Knob
Aperture Knob
Magnichanger
45 Inclined Head
(option to change
to straight head)
CMO
Capture Button
SD Card Slot
Green Filter Knob
Focus Knob
Joystick
HDMI Slot
Tilt Locking Knob
USB Slot
Camera Power Inlet
Arm Locking Knob
Intensity Knob
Ez- Li ft Knob
Swivel Arm Locking Knob
Inlet for Fibre Optic Cable
Height Adjustment Knob
Yellow Filter Knob
Illumination Box
Base with Column
Wheels
3 Issue 1.0 6169000‐795 eVO 500/500D Printed on July, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
With S50 Stand: S50 stand is provided with a vertical range of height up to 125 mm with the help of
the rack and pinion arrangement. User can adjust colposcope as per convenience for exact view of
interest.
S50 stand also has a foldable provision when not in use to park in a compact position.
Magnichanger
CMO
IPD Knob
Green Filter Knob
Joystick
HDMI Slot
Focus Knob
Tilt Locking Knob
Camera Power Inlet
USB Slot
Intensity Knob
Swivel Arm
Lock Ring
Height Adjustment Handle
Inlet for Fibre Optic Cable
Yellow Filter Knob
Illumination Box
Wheels
Power
Cord
4 Issue 1.0 6169000‐795 eVO 500/500D Printed on July, 2013 User’s Manual
M
eVA 500 / 500
0D COLPOSC
COPE
2..
Warnings & Cau
utions
LLABOMED is not
n responsiblle for the safe
ety and reliab
bility of this in
nstrument whe
en:
•
•
Assembly, disassembly,
d
repair,
r
or mod
dification is m
made by unautthorized deale
ers or persons.
Instrumentisnotusedinacccordancewith
hthisUser’s Gu
uide.
W
WARNING: AN
A INSTRUC
CTION THAT
T DRAWS AT
TTENTION T
TO RISK OF IINJURY OR DEATH.
WARNING:
W
UNITED STAT
TES FEDERAL
L LAW AND EU
UROPEAN RE
EGULATIONS REQUIRE THA
AT THIS
DEVICE
D
BE PURCHASED ONLY BY A PHYSICIAN OR A PERS
SON ACTING
G ON BEHALF OF A
PHYSICIAN.
P
WARNING:
W
HOULD BE U
USED IN ST
TRICT ACCORDANCE WIITH THE
THIS INSTRUMENT SH
INSTRUCTION
I
NS OUT LINE
ED IN THIS USER’S GUID
DE. THE SAFFETY OF THE
E OPERATOR ANDTHE
PERFORMANC
P
CE OF THE INSTRUMENT
I
T CANNOT BE
E GUARANTE
EED IF USED
D IN A MANN
NER NOT
SPECIFIED
S
BY
Y LABOMED.
WARNING:
W
EPAIR OR SE
ERVICE THIS
S INSTRUMEN
NT WITHOUT
T AUTHORIZA
DO NOT RE
ATION
FROM
F
THE MANUFACTUR
M
RER. ANY REPAIR OR S
SERVICE TO THIS INSTR
RUMENT MUS
ST BE
PERFORMED
P
BY EXPERIEN
NCED PERSON
NNEL OR DEA
ALERS WHO ARE TRAINED
D BY LABOMED OR
SERIOUS
S
INJURY TO THE OPERATOR OR
O PATIENT M
MAY OCCUR.
WARNING:
W
ONS TO THIS
S INSTRUMEN
NT ARE NOT A
ALLOWED. ANY MODIFICA
ATION TO
MODIFICATIO
THIS
T
UNIT MUST
M
BE AUT
THORIZED BY
B LABOMED OR SERIOU
US INJURY TO
O THE OPER
RATOR OR
PATIENT
P
MAY
Y OCCUR.
WARNING:
W
TRUMENT IS MODIFIED, APPROPRIAT
TE INSPECTIO
ON AND TEST
TING MUST
IF THIS INST
BE
B CONDUCT
TED TO ENSURE CONTINU
UED SAFE USE
E OF THIS IN STRUMENT.
WARNING:
W
E
SH
HOCK, THIS
S EQUIPMENT
T MUST ON
NLY BE
TO AVOID RISK OF ELECTRIC
CONNECTED
C
Y MAIN WITH
H PROTECTIV
VE EARTH OR
R DAMAGE TO
O THIS INSTR
RUMENT
TO A SUPPLY
AND/OR
A
INJU
URY TO THE OPERATOR
O
OR
R OTHERWIS
SE PATIENT M
MAY OCCUR.
WARNING:
W
ENSURE THA
AT THE VOLTA
AGE APPLIED
D TO THE UNIIT IS THE SA
AME AS THE V
VOLTAGE
IS
I INDICATED
D ON THE DA
ATA PLATE OR
R DAMAGE TO
O THE UNIT M
MAY OCCUR.
WARNING:
W
THIS INSTRU
UMENT MUST
T BE PLUGGE D IN TO AN OUTLET WIT
TH AN EARTH
H GROUND.
DO
D NOT REM
MOVE OR DEF
FEAT THE EARTH GROUND
D CONNECTIO
ON ON POWER INPUT CO
ONNECTOR
OR
O THE UNIT
T’S POWER CORD
C
OF THIS INSTRUME
ENT OR DAMA
AGE TO IT AN
ND/OR INJUR
RY TO THE
OPERATOR
O
OR PATIENT MAY
M OCCUR.
WARNING:
W
THE EQUIPM
MENT OR SYS
STEM SHOULLD NOT BE U
USED ADJACENT TO OR STACKED
WITH
W
OTHER
R EQUIPMEN
NT AND THA
AT IF ADJAC
CENT OR STA
TACKED USE IS NECESSA
ARY, THE
EQUIPMENT
E
OR SYSTEM
M SHOULD BE
B OBSERVED
D TO VERIFFY NORMAL OPERATION IN THE
CONFIGURAT
C
TION IN WHIC
CH IT WILL BE
B USED.
WARNING:
W
THIS INSTR
RUMENT IS NOT SUITAB
BLE FOR US
SE IN THE P
PRESENCE O
OF
FLAMMABLE
F
AN
A ESTHETIC
C MIXTURES, SUCH AS OXY
YGEN ON IT ROUSOXIDE.
WARNING:
W
BECAUSE PR
ROLONGED IN
NTENSE LIGHT
E CAN DAMAG
GE THE RETIN
NA, THE
T EXPOSURE
USE
U
OF TH
HE DEVICE FOR OCULA
AR EXAMINA
ATION SHOU
ULD NOT B
BE UNNECES
SSARILY
PROLONGED,
P
, AND THE BRIGHTNESS
B
SETTING S HOULD NOT
T EXCEED WH
HAT IS NEED
DED TO
PROVIDE
P
CLE
EAR VISUALIZ
ZATION OF THE TARGET S
STRUCTURES
S. THIS DEVIC
CE SHOULD B
BE USED
5 Issue 1.0 6169000‐795 e
eVO 500/500D Printed on
n July, 2013 User’s Manual
M
eVA 500 / 500
0D COLPOSC
COPE
WITH
W
FILTER
RS THAT ELIM
MINATE UVR
RADIATION<4
400NM) AND,, WHENEVER
R POSSIBLE, FILTERS
THAT
T
ELIMIN
NATE SHORT- WAVELENGTH
H BLUE LIGHT
T<420NM).
WARNING:
W
F ACCESSORIIES OR CABLES OTHER T
THAN THOSE SPECIFIED, WITH THE
THE USE OF
EXCEPTION
E
OF
O THOSE SO
OLD BY THE MANUFACTUR
M
RER AS REPLA
ACEMENT PAR
RTS FOR THE INTERNAL
COMPONENT
C
S, MAY RES
SULT IN INC
CREASED EM
MISSIONS OR
R DECREASED IMMUNITY
Y OF THE
EQUIPMENT
E
OR
O SYSTEM.
C
CAUTION: ANINSTRUC
A
CTIONTHATD
DRAWSATTE
ENTIONTOTH
HERISKOFD
DAMAGETOT
THEPRODUC
CT.
CAUTION:
C
THE INTERN
NAL CIRCUIITRY OF TH
HE INSTRUM
MENT CONTA
AINS ELECTROSTATIC
DISCHARGE
D
SENSITIVE DEVICES (E
ESDS) THAT MAY BE S
SENSITIVE T
TO STATIC CHARGES
PRODUCED
P
BY
B THE HUM
MAN BODY. DO
D NOT REM
MOVE THE CO
OVERS WITH
HOUT TAKING
G PROPER
ESDS
E
PRECAU
UTIONS.
CAUTION:
C
DO
D NOT USE
E SOLVENTS OR STRONG CLEANING S
SOLUTIONS O
ON ANY PAR
RT OF THIS
INSTRUMENT
I
T AS DAMAGE
E TO THE UN
NIT MAY OCCU
UR. SEE MAINTENANCE S
SECTION FOR
R DETAILED
CLEANING
C
IN
NSTRUCTION.
CAUTION:
C
MEDICAL
M
ELE
ECTRONIC EQ
QUIPMENT NE
AL PRECAUTIIONS REGARD
DING
EEDS SPECIA
EMC
E
AND NE
EEDS TO BE INSTALLED AND PUT IN
N TO SERVIC
CE ACCORDING TO THE EMC
INFORMATIO
I
OMPANYING DOCUMENTS
S.
N PROVIDED IN THE ACCO
CAUTION:
C
PORTABLE
P
AN
ND MOBILE RF
R COMMUNIICATIONS EQ
QUIPMENT CA
AN AFFECT M
MEDICAL
ELECTRICAL
E
EQUIPMENT.
CAUTION:
C
THIS
T
INSTRUMENT IS NOT
T TO BE USED
D NEAR HIGH
H-FREQUENC
CY EMITTING SURGICAL
EQUIPMENT.
E
CAUTION:
C
RUMENT IS NOT INTEND
DED TO BE CONNECTED
D TO EQUIP
PMENT
THIS INSTR
OUTSIDE
O
THE CONTROL OF LABOMED
D OR MUST B
TO AN APPLIICABLE IEC O
OR ISO
BE TESTED T
STANDARDS.
S
6 Issue 1.0 6169000‐795 e
eVO 500/500D Printed on
n July, 2013 User’s Manual
M
eVA 500 / 500
0D COLPOSC
COPE
W
Warning Lab
bels and No
otes
Cautio
on:
Observ
ve all warnin
ng labels and
d notes!
If any label is miss
sing on your instrument o
or has becom
me illegal, p
please contact us
or one of our autho
orized repres
sentatives. W
We will supp
ply the missing labels.
Instrum
ment label plate:
p
The ins
strument lab
bel plate indicates the fo
ollowing:
−
Name of th
he unit
Cat. numbe
er
−
Rated volta
age and currrent consum
mption
−
Rated frequ
uency range
e
−
Serial number
−
mpliance
Safety com
−
Brand nam
me
−
ol:
Brighttness contro
After th
he illuminatio
on has been
n switched o n, you can ccontinuouslyy adjust the
brightn
ness of the fiiber illumination by turni ng the appro
opriate knob
b.
Accompanying doccuments musst be consul ted
g number
Catalog
Compliiance to med
dical device directive 93//42/EEC
Protecttive earth
Yellow filter knob on
o illumination box.
Aperture knob
Green filter knob.
CMO fine focusing knob.
This way up- indica
ates correct upright possition of the ttransport pa
ackage.
Keep dryd
transporrt package shall
s
be keptt away from rain.
The CE
E mark (an acronym
a
for the French ““Conformitie
e Europeenn
ne”) certifies that
a product has met European Union
U
health,, safety and environmen
nt requireme
ents,
which ensure conssumer safety
y.
P
D
DATA
Year off manufacture used on PRODUCT
Fragile
e- contents of
o the transp
port packagee are fragile and thereforre shall be
handle
ed with care
7 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
Directives and standards
The instrument described in this manual has been designed in compliance with the
following standards:
−
−
−
−
EN
IEC
UL
CSA
In accordance with Directives 93/42/EEC, Annex II, Article 3, the quality management
system of LABOMED has been approved by UL which is notified body.
•
−
As per Directive 93/42/EEC, the unit is a Class I instrument
For USA: FDA classification Class II
IEC 60601-1:2005 (3rd edition) Compliance
•
Please observe all applicable accidental prevention regulations.
•
Intended use
LABOMED colposcope eVA 500 and eVA 500D is a device designed to permit
direct viewing of the tissues of the vagina and cervix by a telescopic system
located outside the vagina. It is used to diagnose abnormalities and select areas
for biopsy. It helps the user an excellent level of comfort and improves visual
acuity during use.
•
NOTE: The use of eVA500/500D Colposcope is purely for intended Operative and
Diagnostic medical use. No contact is to be made between the patient and the device.
8 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
3.
CONDITION OF MATERIAL AT TIME OF SUPPLY
The appliance is delivered in 6 assembled groups:
•
Mobile supporting Base
•
Column (S50 0r E50)
•
Illumination box with integrated electrical power supply
•
Swivel Arm (S50 0r E50)
•
Microscope Arm (eVA 500 or eVA 500D)
•
Microscope Head (Inclined or Straight)
Fasteners are enclosed in the packing box.
9 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
4.
INSTALLATION INSTRUCTIONS
4.1
•
•
•
MOUNTING OF ROLLER STAND AND COLUMN (Fig. 1)
Insert column① into the mobile base②.
Fasten screw ③ with enclosed hexagon socket wrench to column ①.
The mobile bases have 5 rollers④ out of two have locking breaks(red)
•
Indication:
The colposcopeeVA 500 / 500D can be mounted on either of the two mobile
stands (E50 & S50). The type is to be specified at the time of purchase.
1
3
2
4
(E50)
(S50)
10 (Fig. 1)
Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
4.2
MOUNTING OF APPLIANCE
•
•
Mount the illumination box③to the column against the vertical guide ②.
Screws①to be tighten to hold the box as shown (Fig. 2.1).
3
1
2
(Fig 2.1)
•
Insert swivel arm④ on top of the column head⑤and screw⑥it on the top as shown
(Fig. 2.2)
6
4
5
(Fig. 2.2)
11 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
•
•
Insert the arm ⑦of the microscope head on the top of the swivel arm ⑧.
Screws ⑨ to be tightened from both sides of the head arm⑦.
9
7
8
(Fig. 2.3) 4.3
Special Instruction:
•
The joint which connectsswivel arm and the column is fitted with a stop to prevent the
inner assembled cables.
The total rotation of the swivel arm is not more than 180° to the column.
On reaching the stop, do not rotate further, to prevent any tear off or damage to the
mechanism.
•
•
4.4
•
•
ADDITIONAL LOAD
The load capacity and tilting stability is balanced with standard suggested parts and
accessories.
Please do not attach additional load.
12 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
5.
DIMENSIONS & WEIGHT (Fig. 3)
eVA 500D– Digital Colposcope with roller stand
Total weight: Approx. 45 kg.
eVA 500– Colposcope with roller stand
Total weight: Approx. 44 kg.
60° Tilt
150
36
0°
27
27
0°
0°
980
36
1127
0°
60° Tilt
150
525
535
160
618
618
(Fig. 3)
13 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
6.
Electrical Connections
Connect the power cable to the AC Inlet socket as 1 in figure number 4 below.
Switch on the power from on/off switch shown as 1 in figure number 5 on 16 below.
Note: Power supply is designed with universal input 100V-240V AC, 50/60Hz. To plug in
follow instruction on electrical label provided at back of illumination box as shown in
figure number 4 below.
a)
•
CHANGING OF FUSE
Note: Fuses are in fuse holder:
F 2.5 A (2 mains input fuses for lamp supply for mains voltage 100-240 V)
•
•
Changing of Fuse: Draw out the plug. Insert a screw driver into the slit of fuse holder
and screw out to the left. Remove cap and replace the fuse placed in it. Once the fuse is
replaced cap it again and screw in to the right. Refer electronical label for correct fuse
replacement
Attention: It is only allowed to change the fuses against fuses of the same type.
1
(Fig. 4) 14 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500 D COLPOSC
COPE
7.
7.1
7.2
7.3
7.4
OPERATING
O
G INSTRUCT
TIONS
On
O / off sw
witchshown as ① in figg. 6 is locatted on the u
upper side off the illumin
nation
box. After th
he appliance
e is switched
d on, the grreen illumin
nation switch
h diode indicates
th
hat the micrroscope is re
eady for ope
eration. Thee LED starts burning and
d the cooling fan
working.
w
In
nlet for cab
ble to came
era power and
a light inteensity regula
ation shown as ② in fig 6.
In
nlet for fib
ber optic ca
ableshown as
a ③ in fig. 6.Insert fiber optic cablle in the inle
et and
ru
un it through
h the swivel arm, to dire
ect the light from illumin
nation box to
o the microsccope.
Yellow
Y
filte
er knob sho
own as ④ facilitates
f
to change the
e filter if req
quired to imp
prove
co
ontrast.
Note:
N
To ma
aximize LED life, switch off
o the micro
oscope when
n not in use..
(Fig. 5)
15 Issue 1.0 VO 500/500D Printed on May, 2013 6169000‐795 eV
User’s Manual eVA 500 / 500D COLPOSCOPE
7.5
BRIGHTNESS CONTROL (Fig. 6)
•
A variation in light intensity is made by rotating knob ①.
1
(Fig 6)
16 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
8.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CONTROL ELEMENTS (Fig. 7.1 & 7.2)
Roller stand:
5 rollers to move the appliance and 2 brakes to lock the Appliance (see Fig. 1)
Rotating knob to change the Magnification ①.
Aperture knob to change the aperture size②.(If required)
Common Main Objective (CMO)③.
IPD knob to change interpupillary distance by turning it laterally④.
SD card slot⑤. (Only in eVA 500D)
Button to capture the image⑥. (Only in eVA 500D)
Fine focusing knob⑦
Knob to swing in green filter⑧.
Joystick to tilt the head arm forward and backward⑨.
HDMI slot for suitable attachment⑩.(Only in eVA 500D)
Head arm locking knob⑪
USB attachment⑫. (Only in eVA 500D)
Inlet for power⑬.
Knob for brightness control⑭.
Knob to lock the arm⑮.
2
1
3
6
4
5
8
7
9
10
11
12
13
15
14
(Fig. 7.1)
17 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
•
•
•
•
•
Ez-lift control knob ⑯. ( with E50 column configuration)
Swivel arm locking knob⑰.
Column height adjustment knob (E50 stand) ⑱and Column height adjustment handle⑱ (S50 stand).
Inlet for fiber optic cable⑲.
Knob to swing in the Yellow Filter ⑳.
•
Illumination Box 21
16
17
19
18
20
18
21
(S50 Stand)
18 (Fig. 7.2)
(E50Stand)
Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
9.
INSTRUCTIONS FOR USING THE MICROSCOPE
a)
ADJUSTMENT OF INTERPUPILLARY DISTANCE (Fig. 8)
•
•
Turn the microscope in working position.
Inclined tube 45°①: Adjust eyepieces ②to the required IPD by turning the lateral
knob③.
Straight tube④: Adjust eyepieces⑤by moving the binocular tube as per your
requirement.
•
2
4
1
5
3
(Fig. 8)
19 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
b)
CHANGING THE MAGNIFICATION (Fig. 9)
•
Adjust to the highest magnification with any of the rotating knobs ① on the
magnification changer ②.
•
See to it that the magnification changer step is engaged into its index position, related
to the desired magnification.
2
1
(Fig. 9)
20 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
c)
HOW TO FOCUSE THE OBJECT (Fig. 9.1)
•
Bring object into rough focus.
•
Rotate fine focusing knob clockwise or anticlockwise to bring object into sharp focus.
•
If the object is outside the range of the fine focusing knob, bring the complete
microscope in the focus range by any of the following means:
a) Roll the mobile stand forward and backward.
b) Adjust the swivel arm towards left and right.
c) Adjust the microscope angle left and right. For this loosen the head arm knob and rotate
the microscope.
A combination of the above steps will give you the true desired focusing median.
•
On focusing the region of interest, change magnification through the magnification
changing knob.
1
A
(Fig. 9.1)
21 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
d)
Red free image observation (Fig. 9.2)
•
Rotate filter knob (1) to swing in or swing out the red free (Green) filter. This will help in
filtering the red tissue in the image being observed and will highlight the enhance vessel
image and the vascular morphology.
① (Fig. 9.2) 22 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
e)
EYEPIECES WITH DIOPTER LOCKING FACILITY (Fig. 9.3)
•
LABOMED eyepieces have a unique locking facility.
•
Diopter lock can be released by moving the slider on eyepiece ① toward right.
•
You can adjust the diopter settings as per your vision correction.
•
Once the diopter adjustment is done as per individual, the movement can be set and
locked by moving the slider②to the left.
UNLOCK
2
1
LOCK
(Fig. 9.3)
23 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
f)
APERTURE SETTINGS FOR THE COLPOSCOPE (Fig. 9.4)
•
To increase the contrast and depth of focus while working at higher magnification
the aperture knob① can be put in place by rotating it clockwise.
1
(Fig. 9.4)
24 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
10.
CHANGING THE BINOCULAR TUBE (Fig. 10)
•
Loosenthe knob①from the top of the head arm ④ to remove the inclined tube 45° ②
or the straight tube ③.
•
When setting up the binocular tube, two plugs should lock into the nuts ⑤ of the
magnification unit. Take care that the tube gets engaged properly. Lock the knob①.
1
5
4
2
3
(Fig. 10)
25 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
11.
CHANGING THE OBJECTIVE / EYEPIECES (Fig. 10.1)
•
The objective (1) has screw type mounting. Unlock it by turning anti-clock wise and lock
them by turning clock wise.
•
Eyepieces (2) are inserted / draw out for changing.
•
Other objectives / eyepieces can be selected by choice.
1
2
(Fig. 10.1)
26 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
12.
CARE & MAINTENANCE (Fig. 11)
This instrument is a high grade technological product and not required any special
periodicalmaintenance if handed carefully. To ensure optimum performance and safe
working order of the instruments, its safety must be checked once every 12months. We
recommended having this check performance by our service representative as part of
regular maintenance work.If a failure occurs which you cannot correct using the troubleshooting table, attach a sign to the instrument stating out of order and contact our
service representative for servicing part or circuit diagram etc
•
Care instructions:
o
o
o
o
Keep accessories away from dust when not in use, e.g. protect them from dust cover.
Remove dust with a pneumatic rubber bulb and soft brush.
Use special optics cleaning cloths and pure alcohol for cleaning lenses and eyepieces.
Protect your colposcope from moister, fumes, acids and cosmetic materials. Do not store
chemicals close to the instrument.
Protect it from improper handling. Never install other devices sockets or unscrew optical
system and mechanical parts unless explicitly instructed to do so in this manual.
Protect the microscope from oil and grease. Never oil or grease the guide surfaces or
mechanical parts.
Remove coarse contamination using a damp disposable cloth.
Use disinfectants based on the following ingredients: aldehydes, alcohols, quaternary
ammonium compounds.
Camera: Keep optical components clean using a lint-free cloth. Soak the cloth using a
little methanol or glass cleaner. Do not use ethanol and spirit.
Do not clean products with optical components in a cleaning/disinfecting device or ultra
sound bath.
LABOMED MaxLite coatings are very resistant. If you clean as described above, the
coatings will not be damaged.
o
o
o
o
o
o
o
•
o
o
o
o
o
Tropical environment/fungus:
LABOMED employs certain safety precaution in its manufacturing techniques and
materials. Other preventive measures include:
Keep optical part clean.
Use and store them in a clean environment only.
Store under UV light when not in use.
Use in continuously climate-controlled rooms only.
Keep moister away and cover using a plastic cover filled with silica gel.
27 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
•
•
Occupational safety and health protection:
Observe work safety and health protection of persons responsible for processing
contaminated products.
Current regulations of hospital hygiene and prevention of infection must be observed in
the preparation, cleaning and disinfection of the products.
Instructions
Workplace:
Remove surface contamination with a paper towel.
•
Reprocessing:
Recommended: reprocess a product immediately after use.
•
Cleaning& Servicing:
Needed: water, detergent, spirits, microfiber cloth
Flush the surface with running water (<40˚ C), using a little detergent if necessary.
Also use spirits to clean optical components.
Dry optical components using a microfiber cloth; dry the rest of the product using a
paper towel.
Service as and when required should be informed to LABOMED after – sales service
department.
o
o
o
o
•
Autoclaving:
The asepsis sets available from LABOMED contain rubber caps, sleeves and grips
recommend for the following program for autoclaving:
Temperature:
134° C
Time:
10 minute
Instrument:
Standard, Autoclave
There are also rubber autoclavable caps for the rotating knobs for aperture ①,
magnification②, green filter ③, fine focusing ④, tilt locking ⑤, arm locking ⑥, Ezlift ⑦, and swivel arm locking ⑧.
Autoclavable caps:
(C1) Part no. 6122015-209
(C2) Part no. 6168000-219
(C3), (C4) Part no. 6168000-213
(C5), (C6), (C7), (C8) Part no. 6168000-216
28 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
Schedule of Autoclavable caps
1
C1
C2
C2
C3
2
4
3
C4
5
C5
6
C7
C6
C8
7
8
(Fig. 11)
29 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
13.
Ambient Requirement
For Operation
For transportation and
storage
Temperature
Rel. humidity
(without condensation )
Air Pressure
+10˚ C…. +40˚ C
30%........90%
Temperature
Rel. humidity
(without condensation )
Air Pressure
-40˚C…….+70˚C
10%.........100%
700hPa…..1,060hPa
500hPa……1,060hPa
The Unit meets the essential requirements stipulated in Annex I to the 93/42/EEC
directive governing medical devices. The unit is marked with: CE and is compliance to
IEC 60601-1:2005 (3rd edition).
14. DISPOSAL
Disposal must comply with locally applicable laws & regulations
30 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 User’s Manual eVA 500 / 500D COLPOSCOPE
15. TECHNICAL SPECIFICATION
Specification
Item
eVA 500
eVA 500D
•
Stand
Star Base Stands with S50 &
E50 column, lockable wheels
Star Base Stands with S50 &
E50 column, lockable wheels
•
Observation
tubes
Straight/Inclined 45°.
Interpupillary distance 47-75 mm
inclined tubes is provided with
control knob for IPD adjustment.
Straight/Inclined 45°.
Interpupillary distance 47-75 mm
inclined tubes is provided with
control knob for IPD adjustment.
•
Eyepieces
Wide field 10x, 18mm FOV,
focusable with retractable eye
guards, diopter lock, antifungal
Wide field 10x, 18mm FOV,
focusable with retractable eye
guards, diopter lock, anti-fungal
•
Apochromatic
Magnichanger
5 Step: 0.4x, 0.6x, 1.0x, 1.6x,
2.5x
5 Step: 0.4x, 0.6x, 1.0x, 1.6x,
2.5x
•
Objective
f-300mm,
high
aperture stop
f-300mm, high contrast aperture
stop
•
Built-in filters
Green positioned
changer
mag-
Green positioned at mag-changer
•
Light Source
LED 50W, lamp life up to
60,000 hours with built in
Yellow filter
LED 50W, lamp life up to
60,000 hours with built in Yellow
filter
•
Power
consumption
130 W max.
130 W max.
•
Input voltage
100V-240V; 50/60 hz.
100V-240V; 50/60 hz.
•
Digital
Imaging
N.A
Integrated 5 MP Imaging Camera
1080p HDMI output
USB
v2.0
output
for
PC
connectivity Integrated Capture
Button
Online capturing on integrated SD
Card PixelPro* Camera Control
Software
contrast
at
31 Issue 1.0 6169000‐795 eVO 500/500D Printed on May, 2013 labomed
Our policy is one of continuous development. Labotech Microscopes India Pvt. Ltd., reserves the right to change design and specification without prior notice.
Manufactured for:
Labo America Inc.
920 Auburn Court
Fremont
CA 94538
U.S.A.
Telephone: 510 445 1257
Fax: 510 991 9862
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement