TOP HOME SPACE TP10319-W Rocking Metal Outdoor Dining Chair Use and Care Manual
PDF
Download
Document
Advertisement
Advertisement
ASSEMBLY INSTRUCTIONS Part# [Reference Image| QTY STEP 1 A 1 B 1 C 1 a _ D > 4 Connect chair back (A) with seat board (B). M6*20 bolts (H) are used. Please do not tighten bolts to the end at this step. m 1 STEP 2 р = EC \ H cf} 10 н = Connect armrests (С) and (0) with chair back (A) and seat board (B). M6*20 bolts (H) are used. e] (H) 4 Please do not tighten bolts to the end at this step. M8*40 Po | ‚ STEP3 Bolt Plate L 4 M (> 4 N 1 Connect chair base (E) with assembled seat part. M8*40 bolts (I), spring washers (M), washers (L) and nut (К) are used. Please make sure all bolts are inserted and connected properly, O 2 then tighten all bolts to the end. STEP 4 ASSEMBLY TIPS: Please use the hardware and accessories included in the set. DO NOT use other electrical or manual tools. In order to facilitate the assembly and make your final product firm and stable, please tighten by a few rounds each screw one by one. After all screws are connected, then you start to tighten each screw to the end. DO NOT tighten any screw to the end before you've connected all screws. The assembly requires minimal level of DIY skills if you follow the instructions carefully. In case | Put cushions proper! you encounter any difficulty or have any questions, feel free to contact the store or manufacturer. propery, и finish and enjoy your chair. ">

Public link updated
The public link to your chat has been updated.
Advertisement