Y-3357 Users Manual
2 Bay GIGABIT NAS+DAS Enclosure
User’s Manual
1A. Hardware Installation Instructions
The series of the product support network and USB3.0 dual modes working pattern,
hardware installation in brief is as follows:
1.1 Please select 3.5’’ SATA I/II HDD, please confirm HDD connected with SATA
port firmly before installation.
1.2 Connect Power Wire
1.3 For selection of network mode, connect the network cable and router cable to
the product. Turn on the power and start connecting according to the Step 2.
(Suggest formatting the hard disk by network mode.)
1.4 For selection the USB 3.0 mode, connect the USB cable to the computer. Turn on
the power of the computer system which can recognize the product automatically
in a minute.
1.5 Setting of RAID Disk Array (for 2 HDDs or above system)
All of the products are using individual chips for the drive. The disk array is
controlled by hardware instead of software. The setting steps are as follows:
1.5.1 Adjust RAID knob (1), press on “Enter” (2) Switch, then restart the power and
wait about 10 minutes.
Notes:Please change to single mode before altering any modes of RAID disk array.
Otherwise, it cannot be changed. Meanwhile, you should format the HDD by network
mode after changing the setting of RAID disk array. After that, it can work in normal.
1.5.2 RAID Knob Adjustment Antipodal Table
RAID Rotation Digital
2-bit Network Storage
4-bit Network Storage
1B Software Setting Instructions
1. Installation and usage of NAS searching software
CD is supplied by NAS including two kinds of network storage seeking softwares
SyncQuick NetDisk and SDisk.jar, both of which can supply the searching function of
1-1 Searching NAS by using SyncQuickTM NetDisk software
1-1-1: Install software from CD,clik SynQuick NetDisk.exe
1-1-2: Clik “Magnifier” drawing (1) to search NAS, the NAS in all network zones
will show in the field of “Device Name”.
1-1-3: Select the NAS to be connected → Press the right button → select “Open NAS
Control Page” (2) to open NAS control page (Default account name and
password: admin)
1-2 Use “SDisk.jar” software to search network storage.
1-2-1 Execute “Sdisk. jar” software(Please install Java Runtime firstly, the download
location is www.java.com.)
1-2-2 Press “Search” to look for NAS.
1-2-3 Select the NAS to be connected, then press “Connect” to connect NAS control
2. Set NAS languages
NAS provides multinational operation languages, please select corresponding
language flag.
2-1 Systems
2-1-1 You can see the basic information of NAS here, including systems, network,
services and interface messages.
A. System information
Host name: it’s for recognizing internal NAS name, press “Change” key to
change the host name or group name.
Administrator/password: default password is admin, press “Change” key to
alter the password if necessary.
Date and time: default SNTP serves for network time, press “Change” key to
change the date and time manually if necessary.
Firmware Version: show current firmware version.
File languages support: show current file language (default language is
English), you can select corresponding language if the storage or
transmission of other language files needed.
Please confirm and select the right language of files to let files transferred and read correctly.
B. Network Newsletter
It shows NAS internal or external IP location, MAC and external WebDAV address.
C. Service Newsletter
You can open or close DHCP, UPNP, SAMBA, WEBDAV, FTP and Media service
functions etc.here.
D. Interface Information
It shows HDD capacity and information.
2-1-2 Network
You can set network, PPPoE,DDNS & UPNP on this page.
A. IP setting: preset “Get IP automatically”, select “Fix IP” to change the setting if
B. PPPoE: PPPoE (Point-to-Point Protocol over Ethernet) can be used when
connected with ADSL Modem, please input the account and password ISP
C. DDNS: DDS service (Domain Name System) is used to convert IP to special realm
name, the NAS is suitable for DDNS service supplied by DYNDNS service
D. Start Cloud function, open www.mydisk.biz from external network when the
situation is showed successfully, you can remote login the product to manage by
inputting host name. (Please alter default host name, start upnp, this function can’t
support secondary routing network environment.)
2-1-3 Maintenance
You can format the HDD, upgrade the firmware of NAS, restart or reply the setting of
A. HDD Tool: Support exFAT(FAT64) HDD formatting function, please backup
HDD data before formatting, because all the data of HDD will be deleted while
Notes: The mode of HDD must be exFAT before installation, or HDD must be
formatted first to use server function of NAS.
Indication: Please use network cable to connect NAS to format HDD, don’t use USB
cable, which may generate errors for formatting HDD.
B. Firmware Upgrade: Upgrade the firmware after getting the correct new version of
In the process of upgrading firmware, please do not close the machine, or the
hardware may be destroyed.
C. Restart: Restart NAS here.
D. Recover the Factory Default Setting Value: Execute “Recover Default” to recover
factory default setting. Except SAMBA/FTP account setting, other settings will be
recovered to factory default setting.
2-2 Function
2-2-1 SAMBA File Server
You can add/change/disable/delete SAMBA accounts and set folder permission
suitable for internal transmission, default account “guest” can read default folder
A. How to add Samba account?
A1 : Select Samba service page → Press “Add” button
B. Input new account name and password
C. Set the folder shared by this account
System will add a folder with the same name automatically when SAMBA file server
adds a new account, which can access this folder and shared folder “Public” as the
below added account “A1”, but administrator can manage the added or reduced
folders shared for this account from the left folder lists.
C1: Press “Start” key, input “\\Storage IP Location or Name”, then press “Enter” key,
another window will jump and requires to input account and password when A1
account wants to access shared folder.
C2: How to Change/Delete SAMBA Accounts
(1).Select the account to be altered → Press “Change” to amend
(2).Select the account to be deleted → Press “Delete” to delete
2-2-2 WebDAV Server
WebDAV server is the extension application of HTTPS agreement, which can display
remote files and preview, download or upload files through browser.
A. How to add WebDAV accounts
A1: Select “WebDAV Server” → Press “ Add” →Input account and password→
Press “Add” to save setting
A2: The Sharing Setting of WebDAV account folders
System will add a folder with the same name automatically when WebDAV server
adds a new account, which can access this folder and shared folder “Public” as the
below added account “A1”, but administrator can manage the added or reduced
folders shared for this account from the left folder lists.
A3. How to Change/Delete WebDAV Account
(1).Select the account to be changed → Press “Change” to amend
(2).Select the account to be deleted → Press “Delete” to delete
B.How to connect WebDAV by internal network
B1: Administrator can get internal IP from the page of WebDAV, as follows:
B2: Input the above IP on browser, then input WebDAV account and password
B3: How to connect WebDAV by external network
(1) Firstly you must get fixed external IP and access network router setting page to
make external IP point to internal IP of NAS.
(2) External IP links display meanwhile on the WebDAV setting page of NAS as
(3) Input external IP links to browser address columns, then remote NAS can be
connected through international network.
(4) After logging in WebDAV account successfully,shared folders and files will be
showed on the page.
On Windows platform, the limitation of the largest WebDAV file is 500MB, which
can be renewed by provided CD “WebDAV registry Editor” that can promote the
largest file to 4GB or remove the limitation of files by the blow links to download
software (BitKinex or Netdrive)
2-2-3 FTP Server
Router external fixed IP must be pointed to internal IP of NAS (Please refer to the
instructions of router for the details) in order to connect FTP server of NAS through
Internet. (External Network)
FTP server is normally preset to 21(It can be changed to 1025-6550), meanwhile the
default account “anonymous” can connect shared folder “public” without password.
A. Adding, changing and files sharing FTP accounts are all the same with
SAMBA/WebDAV account management steps.
English is advised to be top-level folder names to avoid display problems of
languages, meanwhile special symbols or black space can’t be used for FTP account
B. Renewing and deleting FTP accounts are all the same with SAMBA/WebDAV
account management.
2-2-4 Bit Torrent (BT/PT Download)
A. Setting
A1: To Bit Torrent Page →Select “Download Location” (1) Folder saved files ( Do
not change location in download)
A2: Click “ Select Files” (2) Press key (3) to download after selecting BT seed
B. Summary Info
Select “Summary Info” to read more information downloaded, eg. time, download
speed etc.
- Support maximum 4pcs seeds to download simultaneously
- Download series up to maximum 32pcs seeds
C.BT Setting
You can set BT download/upload speed
– BT upload speed limitation, 0=No Limitation
– BT download speed limitation, 0=No limitation, 4KBps is the lowest download
D. Setting of Emails notification for BT
You can send emails notification after you set and finish downloading BT here.
Firstly start emails notification→Input SMTP Outgoing Server Name→Sender
Emails→Receiver Email Accounts→Sender Email Password→Press “Application” to
finish setting
2-2-5 UPnP Video Server(X-Box, PS3)
The product supports DLNA video products, such as Xbox/PS3 etc.
Video server can play shared video files saved in the product directly through network
when the product shares the same network wire with the video server in compliance
with DLNA standard.
Connect to the Network
LAN Cable
XBox or PS3
DLNA Client
A. Select “UPnP Video Server”, select folders separately in NAS to share
videos(Such as the all below pictures/music/video set by public folder to share, video
files only in this folder can be read by video server.) If iTune player software is used,
the playlist must be created here.
3. FAQ
Q: What is default IP of NAS?
A: Default IP location is, input this IP to search after connecting this
product with Ethernet port of computer.
Q: What is default management account name and password of NAS?
A: Default management account and password are all “admin”.
Q: What shall we do when forgetting management account and password?
A: Turn off the power → Press"Reset"key → Turn on the power and press “Reset”
Key for 10 minutes to recover default , except SAMBA/WebDAV/FTP accounts,
other settings will be recovered default.
Q: Why can’t add SAMBA/WebDAV/FTP accounts?
A: All of user accounts, passwords and external folders are advised to name in
English in order to avoid text supporting problems.
Q: Why can’t upload files or disconnect through network?
A: Please confirm if the online situation of product is good and you have the
permission of reading the folder.
Q: What systems does NAS support?
A1: It supports below systems: XP(SP3), Vista(SP2), Windows7/MAC OS X(10.5.X,
not including Lion)/Linux(Samba3.X)
A2: It Supports file format: exFAT (Largest Single File 127GB)
Q: Do the quantities of SAMBA/WebDAV/FTP users and shared folders have
A: It can add 16 user accounts and 16 shared folders at most.
Q: Does WebDAV support Mac?
A: Yes, WebDAV supports Mac10.5 system above, please refer to the below link to
see the relevant setting information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF