Quoizel KY1507IN Kyle 8 in. 1-Light Iron Gate Mini Pendant Instructions
Advertisement
Advertisement
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Assembly Instruction Sheet #IS-KY1507IN
For Style KY1507IN
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Bulb Recommended: (1) Medium Base 100W Maximum
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.
A H
Package Contents
Part
C
D
A
B
E
F
I
J
G
H
K
L
Description
Crossbar
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Ceiling Canopy
Lock Screw
6” Rod
12” Rod
Rod Assembly
Socket Assembly
Shade
Quantity
1 pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1 pc.
4 pcs.
2 pcs.
2 pcs.
1 pc.
1 pc.
1 pc.
J
L
I
K
F
G
B
C
D
E
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2012 QuoizelInc.
1of6
May2012
6”
KY1507IN
FINISH: IRON GATE
4
1.5"
3
58.5”
OVERALL HEIGHT INCLUDES
(2) 6” AND 12” RODS
5" Dia.
12”
2
R
L
E
1
20"
10"
5
6" Dia.
8” Dia.
(1) 100W
Medium Base Bulb
(Not Supplied)
NO.
PART NUMBER
3
4
1
2
5
11507INKY
9562KIT
9012EXIN
9006EXIN
G3327SH
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2 "
REPLACEMENT PART DESCRIPTION
BASE KY1507IN
MOUNTING HARDWARE /CANOPY IRON GATE 5"D
ROD EXTENSION IRON GATE 12"L X 0.5"D
ROD EXTENSION IRON GATE 6"L X 0.5"D
SHADE WHITE ONYX 6"D X 10"H
2of6
REQ.
2
2
1
1
1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-KY1507IN
For Style KY1507IN
STEP 1
-
Assemble Rods
A. Determine the Rods (H/I) to be assembled to the Socket
Assembly (K) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (H/I) and Rod Assembly (J), then thread the chosen
Rods (H/I) , Rod Assembly (J) and the Socket Assembly
(K) together. Hand tighten until snug.
Figure 1
6” Rod
6” Rod
12” Rod with Nipple
12” Rod
STEP 2
-
Assemble Ceiling Canopy to Upper
Rod
A. Pass Supply Wires and Ground Wire through the Ceiling
Canopy (F) and then thread the Ceiling Canopy (F) and the Upper Rod together. Hand tighten until snug.
Rod
Assembly
Supply Wire and
Ground Wire
Socket
Assembly
Ceiling
Canopy
Supply Wire and
Ground Wire
Upper Rod
Figure 2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2012 QuoizelInc.
3of6
May2012
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-KY1507IN
For Style KY1507IN
STEP 3
-
Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on the Ceiling Canopy (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until snug.
Mounting Screw
Lock Washer
Ceiling
Canopy
Crossbar
Hex Nut
STEP 4
-
Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Mounting
Hole
Figure 3
Outlet
Box
Crossbar
Outlet Box
Screw
Figure 4
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2012 QuoizelInc.
4of6
May2012
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-KY1507IN
For Style KY1507IN
STEP 5
-
Make Wire Connections
A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.
Figure 5
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply
Black wire from fixture
Ground wire from fixture
Figure 6
STEP 6
-
Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy (F) over the Mounting Screws
(B) and secure with Mounting Balls (E). Hand tighten until snug.
Mounting Screw
Figure 7
Ceiling Canopy
Mounting Ball
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2012 QuoizelInc.
5of6
May2012
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-KY1507IN
For Style KY1507IN
STEP 7
-
Assemble Shade to Socket Assembly
A. Line up the Lock Hole on the Socket Assembly (K) and the
Hole on the Shade (L), then thread the Lock Screw (G) in to the Lock Hole on the Socket Assembly (K) to assemble the
Shade (L). Hand tighten until sung.
Socket
Assembly
Lock Hole
Lock Screw
Hole
Shade
Figure 8
STEP 8
-
Install Bulb
A. This fixture uses standard bulb with a medium screw base.
Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Bulb
Socket
Figure 9
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2012 QuoizelInc.
6of6
May2012

Public link updated
The public link to your chat has been updated.
Advertisement