™
Please read all instructions before proceeding.
Installation Instructions
1. To calculate the amount of Privacy Weave needed, follow the simple formula of: Fence Height x Fence Length / 40 = Total needed rolls.
2. Privacy Weave must be inserted diagonally into the chain link fence. Measure each diagonal row of fence openings, allowing for 3 extra inches from desired length to ensure a 1-1/2 in. overlapping piece on each end ( Figure 1 ).
3. Starting from top or bottom, insert Privacy Weave diagonally over and under each chain link opening ( Figure 2 ).
4. Fold the 1-1/2 in. flap over the last diagonal wire and insert the brass fastener through the weave securing it to the chain link fence ( Figure 2 ).
5. From the opposite end, pull to tighten weave and repeat step number 4.
Figure 1
Installation Instructions for:
330250WGREB Privacy Weave
Figure 2
Page: 1 of 1
