A Product of SMART VISION TECHNOLOGY

A Product of SMART VISION TECHNOLOGY
 A Product of SMART VISION TECHNOLOGY
#143/69, Thangal lake view street, Virugambakkam, Chennai 600092 | [email protected] | 044 432 10 100 | 822 00 00 640/1/2 RF Remote Switch: 12 Channel
This 12 channel dc remote control switch operates in toggle, momentary, latched and mixed control
mode (set the mode as you like freely). You can use it to control at most 12 different electrical
devices. Remote distance up to 500m. Control lights, motors, fans, electrically operated doors /
locks / windows / blinds / cars or other appliances with voltage AC110~240V or DC0~28V
Feature:











Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances
with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance;
the wireless RF signal can pass through walls, floors and doors.
With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P447, an 8-bit microprocessor designed and developed with lowpower and high-speed CMOS technology.
Use ULN2003 to drive relay, with strong anti-interference.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Receiver:










Channel: 12 CH
12 Control Modes: Toggle, Momentary, Latched, Toggle + Momentary + Latched, Toggle + Latched,
Momentary + Latched, Toggle + Momentary…
Coding Type: Fixed code
Coding Setting: By learning
Operating Voltage: DC12V±1V
Working Voltage Range of Relay: AC110~240V or DC0~28V
PCB Size: 94mm x 73mm x 18mm
Case Size: 100mm x 80mm x 30mm
Static Current: ≤6mA
Maximum Working Current: 5A / each channel
Transmitter:





Channel: 12 CH
Remote Control Distance: 500m / 1500ft (theoretically)
Encode: Fixed code by soldering
Unit size: 110mm x 50mm x 18mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
A Product of SMART VISION TECHNOLOGY
#143/69, Thangal lake view street, Virugambakkam, Chennai 600092 | [email protected] | 044 432 10 100 | 822 00 00 640/1/2 Usage:




1) Learning Toggle control mode: When the receiver is in the status of LEARNING, press button 1 of
the remote control.
Control mode Toggle (Channel 1~12): Press -> On; Press again -> Off.
2) Learning Momentary control mode: When the receiver is in the status of LEARNING, press button 2
of the remote control.
Control mode Momentary (Channel 1~12): Press and hold -> On; Release -> Off.
3) Learning Latched control mode: When the receiver is in the status of LEARNING, press button 3 of
the remote control.
Control mode Latched (Channel 1~12): Press -> On, other relays Off; Press other button -> Off.
4) Learning Toggle (Channel 1~4) + Momentary (Channel 5~8) + Latched (Channel 9~12) control
mode: When the receiver is in the status of LEARNING, press button 4 of the remote control.
A Product of SMART VISION TECHNOLOGY
#143/69, Thangal lake view street, Virugambakkam, Chennai 600092 | [email protected] | 044 432 10 100 | 822 00 00 640/1/2 







5) Learning Toggle (Channel 1~6) + Momentary (Channel 7~12) control mode: When the receiver is
in the status of LEARNING, press button 5 of the remote control.
6) Learning Toggle (Channel 1~6) + Latched (Channel 7~12) control mode: When the receiver is in
the status of LEARNING, press button 6 of the remote control.
7) Learning Momentary (Channel 1~6) + Latched (Channel 7~12) control mode: When the receiver is
in the status of LEARNING, press button 7 of the remote control.
8) Learning Latched (Channel 1~4 interlocked; Channel 5~8 interlocked; Channel 9~12
interlocked) control mode: When the receiver is in the status of LEARNING, press button 8 of the
remote control.
9) Learning Toggle (Channel 1~10) + Momentary (Channel 11~12) control mode: When the receiver
is in the status of LEARNING, press button 9 of the remote control.
10) Learning Toggle (Channel 1~4) + Momentary (Channel 5~12) control mode: When the receiver is
in the status of LEARNING, press button 10 of the remote control.
11) Learning Toggle (Channel 1~4) + Latched (Channel 5~12) control mode: When the receiver is in
the status of LEARNING, press button 11 of the remote control.
12) Learning Toggle control mode (Channel 1~10) + All On / Off (Channel 11/12): When the receiver
is in the status of LEARNING, press button 12 of the remote control.
Press button 11: Turn on all 12 relays
Press button 12: Turn off all 12 relays
Package Include:



1 x Receiver: (12 Channel / 12 Control Modes)
1 x Transmitter:
1 x User manual
Note:
The theoretical distance is 500m, which shall be operated in an open ground; no barriers and no any
interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other
signals. Therefore, the actual distance cannot reach 500m.
A Product of SMART VISION TECHNOLOGY
#143/69, Thangal lake view street, Virugambakkam, Chennai 600092 | [email protected] | 044 432 10 100 | 822 00 00 640/1/2 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement