HVACR General Tools
HVAC/R Test Instruments
and Specialty Hand Tools
HVACR13
Precision, Specialty and Innovation . . . Since 1922
HVAC/R
Test Instruments and
Specialty Hand Tools
VIDEO INSPECTION SYSTEMS
3 – 19
Thermal Imaging Cameras 3 – 4
Specialty Borescopes 5
High Performance Borescopes 5 – 13
Pipe & Duct Recording Borescope 9
The SEEKER™ Series Borescopes 14 – 19
TEMPERATURE
ELECTRICAL
20 – 24
26 – 29
Combustible Gas Detectors 30
Gas, CO & Refrigerant Leak Detectors 31 – 32
Data Logging Hot Wire Anemometer 33
Airflow Meters 34 – 35
Manometers & Pressure Meters 36 – 37
48 – 56
Tubing Benders, Gages & Cutters 48 – 49
Pipe & Hose Cutters 50
Screwdrivers 51
Digital Calipers 52
Magnifiers & Retriving Tools 53
Inspection Mirrors 54 – 55
QUAD™ Saw/Driver Set 56
PLANOGRAMS
30 – 37
40 – 47
AC & AC/DC TRMS Clamp Meters 40 – 41
Multimeters 42 – 43
Electical Circuit Testing 44
Electrical Testers & Voltage Testers 45 – 46
Starter Switch & Test Leads 47
SPECIALTY HAND TOOLS
Moisture, Temperature & Humidity Meters 26
Psychrometers 27
Humidity-Temperature Monitors 28
Temperature-Humidity Data Loggers 29
SAFETY
38 – 39
Specialty Instruments 38
Tachometers 39
Infrared Thermometers 20 – 22
Stem Thermometers 23
Thermocouple & Service Thermometers 24
Indoor/Outdoor Thermometers 24
Remote Sensing Thermometers 25
MOISTURE,
TEMPERATURE & HUMIDITY
INDUSTRIAL
57 – 59
Environmental Instruments 57
Electrical Instruments 58
Specialty Tools & Instruments 59
PRICE LIST/INDEX
Alphanumeric Index 60 – 63
60 – 63
PREDATOR SERIES
Thermal Imaging Cameras
GTi10: Thermal Imaging
GTi20: Thermal/Visual Imaging
with Picture-in-picture
GTi30: Thermal/Visual Imaging with
& Picture-in-picture, Streaming
GTi50 Video and Voice Annotation
GTi10
Ideal for revealing invisible heat-driven processes and problems.
Applications include: equipment maintenance and repair (MRO);
building energy audits; process/manufacturing plant maintenance;
water damage restoration; automotive repair; firefighting;
navigation; surveillance
By converting objects’ infrared (IR) radiation to visible color
images, thermal imaging cameras make it possible to detect
very small temperature differences from a distance. Heat
signatures can help diagnose the cause of equipment failures
and poor performance due to wear and tear, misalignments
and fault conditions.
Features & Benefits:
Options:
• 160 x 120 (19,200) pixel focal plane array
IR detector 384 x 288 (110,592) pixels (GTi50 only)
• Temperature sensitivity of ±0.14°F (0.08°C)
Temperature sensitivity of ±0.072°F (0.04°C) (GTi50)
• 4 in. (100mm) minimum focal distance
allows close-up work
• Included 2GB MiniSD card stores images
for later uploading to PC
• USB 2.0 and Video Out jacks
• Bright 3.5 in. diagonal flip-up color LCD
• Manually or automatically adjustable image
level and span (brightness and contrast)
• Adjustable emissivity
• Tripod mount (via optional adaptor)
• Water, dust and oil-resistant to IP54 standard
• Shock and vibration-resistant
• Powered by rechargeable Li-ion battery
• Capture and store image using trigger
• 3 year limited warranty
• Up to 5 hours of operation using 2 batteries
Extra Batteries; Wide-Angle Lens with
38° (GTi10, 20, 30), 48° (GTi50) Field of View;
Telephoto Lens with 6.4° or 9° (GTi10, 20, 30),
12° (GTi50) Field of View; In-Camera Charger;
Car Charger; Professional Analysis & Reporting
Software; Tripod Adapter; Extended Temperature
Range to 1112°F (600°C), 1832°F (1000°C) or
2732°F (1500°C); 5 Year Limited Warranty
Includes:
UPC
NO.
01550 6
01586 5
01551 3
01592 6
GTi10
GTi20
GTi30
GTi50
GTi20
GTi30
GTi50
An IR image of a water pump’s motor
Camera; 2 Rechargeable Li-ion Batteries; Compact
Battery Charger; 2GB MiniSD Memory Card; SD Card
Reader; Video Cable with BNC Plug; USB 2.0 Cable;
Bluetooth Headset with Charger (GTi30, GTi50); Lens
Cap; Standard Analysis & Reporting Software on CD;
Calibration Certificate; Sun Shield; Hand & Neck
Straps; Custom Hard Case; User’s Manual;
3 Year Limited Warranty
A hot-water valve, shot in the dark
All four GTi thermal imaging cameras
feature a large, bright color LCD and
point-and-shoot simplicity
General Tools & Instruments
3
PREDATOR SERIES
Thermal Imaging Cameras
GTi10
GTi20
GTi30
GTi50
“PREDATOR” SERIES
FEATURES & SPECIFICATIONS
Picture-in-Picture Mode
(Visual + Thermal Image Fusion)
No
Analysis Tools
2 Movable Spots,
Isothermal Analysis
LED Flashlight
Temperature Alarms
Visual File Format
Visual Image Resolution
Thermal Video Streaming
Voice Annotation
IR Resolution
Spatial Resolution
Thermal Sensitivity at 86°F (30°C)
Field of View
Refresh Rate
IR Detector Spectral Range
Laser Pointer
Temperature Measurement Range
Detector Type
Accuracy
Focusing
Measurement Compensation Factors
Minimum Focal Distance
Optional Telephoto and Wide-Angle Lenses
Display
Auto Hot/Cold Spot Indicator
Video Output Formats
Color Palettes
Image Storage Medium, Capacity
Thermal File Format
Text Input
Battery
Total Charge Capacity
Power Saver Mode
Operating Temperature
Water/Dust/Oil Resistance
Shock Resistance
Vibration Resistance
Tripod Mount
Weight
Dimensions
Tripod Mount
External Power Source
Limited Warranty Duration
4
General Tools & Instruments
Yes
4 Movable Spots,
Isothermal Analysis
No
No
Prop SAT/JPG
N/A
9 Movable Spots,
Isothermal Analysis
Profile Analysis, 5 Area Analysis
Yes
Yes
Prop SAT/CCD/JPG
320 x 240 pixels
No
No
640 x 480 pixels
Yes (Via USB)
Yes (Via Bluetooth)
384 x 288 pixels
1.3 mrad
±0.072°F (0.04°C)
24° x 18°
160 x 120 pixels
2.2 mrad
±0.14°F (0.08°C)
20° x 15°
30 frames per second (fps)
8 to 14um
Yes
4° to 572°F (-20° to 300°C), upgradeable to 1112°F (600°C) or 2732°F (1500°C)
Uncooled focal plane array, manual focusing
-4° to 572°F (-20° to 300°C)
optionally upgradeable to 1112°F (600°C), 1832°F (1000°C), or 2732°F (1500°C)
Manual
Emissivity, Ambient Temperature, Humidity, Distance
4 in. (100mm)
Yes (6.4°, 9° and 38° (GTi10, 20, 30); 12°, 48° (GTi50) )
Flip-up 3.5 in. diagonal color LCD
Yes
NTSC, PAL
Ironbow, Iron-Inverted, Rainbow, Feather, Grey, Grey-Inverted
2GB MiniSD memory card (included)
Proprietary SAT, Radiometric, JPG
No
Rechargeable Lithium-Ion
Up to 5 hours continuous with 2 batteries
Yes
-4° to 122°F (-20° to 50°C) @ 10 to 90% RH
IP54
Operational 25G
Operational 2G
Non-standard. Optional Adaptor needed (No. TRPDGTi)
1.3 lb. (580g)
6.8 x 3.1 x 6.4 in. (172 x 80 x 162mm)
Non-standard. Optional Adaptor needed (No. TRPDGTi)
External AC Battery Charger provided.
Optional: In-Camera Charger (No. ADPTRGTi), Car Charger (No. CRCHGTi)
3 Years
VIDEO INSPECTION SYSTEMS
Specialty Borescopes
iBORESCOPE – DCiS1
Exclusive in North America!
Ideal for wireless inspection applications. With the help of a free app, iBorescope can
wirelessly stream video to your iPhone®, iPad® or Android™ device via a self-generated
WiFi hotspot without Internet access. Video clips and still images extracted from the
stream can be displayed, stored, played back and shared.
FEATURES:
• 6 ft. (1.83m) long (35 in./900mm), thin
(0.39 in./9.8mm diameter) flexible-obedient
probe captures VGA (640 x 480 pixel) resolution
video
• App's VIDEO and SNAP SHOT soft buttons
capture .mp4 (Apple) or .m4v (Android) video
clips and still .jpg images of video stream and
save files to Photos folder of iPad/iPad or
Android device. Video clips and photos can be
viewed immediately, shared immediately by
text, or shared later via e-mail or Skype™.
• Non-replaceable Li-ion battery charges through
included USB cable
• Includes three useful probe tip accessories
SPECIFICATIONS:
♦ Compatible with: All iPad, iPhone and Android
devices
♦ Security: WiFi (WEP) password
♦ Video Resolution: 640 x 480 pixels (VGA)
♦ WiFi Range: 60 ft. (18m), max (unobstructed)
♦ Camera Lighting: 2 white LEDs
♦ Camera Head Diameter: 0.39 in. (9.8mm)
♦ Camera Depth of Field: 1/2 in. to 12 in.
(12.7 to 305mm)
♦ Camera Field of View: 54°
♦ Probe Length: 6 ft. (1.83m)
♦ Probe Minimum Bending Radius: 1.77 in. (45mm)
♦ Dust & Water Resistance Rating: IP67
(Probe & Camera Head only)
♦ Operating Voltage: 3.7V internal from 5V input
♦ Current Consumption: 600 mA, max @ 5VDC
♦ Operating Temperature: 32° to 104°F
(0° to 40°C)
♦ Grip Dimensions: 8.50 x 2.50 x 4.88 in.
(216 x 64 x 124mm)
♦ Weight: 5.80 oz. (164.43g)
♦ Power Source: Rechargeable Li-ion battery
with 5V/1A output
♦ Battery Life: 3 hours (typical)
♦ Warranty: 1 year (limited)
Wor
ks w
any ith
iPho
or A ne, iPad
n
Dev droid
ice!
DCiS1
INCLUDES:
WiFi Grip, 0.39 in. Diameter x 6 ft. Long Probe,
Charging Cable with USB Plug (compatible with
iPad/iPhone/Android Power Adapter and all
computers), Video Cable, Three Probe Tip
Accessories (45° Mirror, Magnetic Pickup, Pickup
Hook), Custom Hard Case, User’s Manual
UPC
NO.
01591 9
01597 1
DCiS1
P600-3 105 in. (2.7m) long, 9.8mm
diameter optional probe
iBorescope makes it easy to identify the jacks on
the back of rack or wall-mounted equipment
WATERPROOF VIDEO INSPECTION SYSTEMS
SEASCOPE™600 (DCS600) NON-RECORDING
SEASCOPE™660 (DCS660) RECORDING – DCS600, DCS660
Ideal for plumbing-related applications and inspections of submerged structures
and parts of boats, ships, bridges or offshore oil platforms.
FEATURES:
• Makes it possible to inspect sewer and water
lines carrying running water
• Enables a diver or snorkeler to view probe video
under water in real time. Other “waterproof”
inspection systems lack watertight grips and
monitors
• Ideal for marine search & rescue operations
• Eliminates concerns about accidentally dropping
or dunking grip or monitor into water
• Grip, probe and monitor are guaranteed leakproof to depth of 1m; all three components will
also resist leaks at depths up to 2m for short
periods (1 hour, max)
• 3.4 in. (86.4mm) color LCD makes videos large
and crystal-clear
• Video can be inverted (rotated 180°) to make it
easier to read labels and serial numbers
• Analog Video Out jack
Additional Features for SeaScope™660
• Record time/date-stamped still images and
videos on included 2GB MicroSD memory card
• Videos can be panned by joystick and zoomed
up to 4X
• Includes USB jack and cable for PC connection
SPECIFICATIONS:
♦ Camera-Tipped Flexible Obedient Probe
Diameter, Length: 9.8mm (0.39 in.), 1m (3.3 ft.)
♦ Field of View: 54°
♦ Depth of Field: 0.6 to 6 in. (15 to 150mm)
♦ Camera Illumination: 2 white LEDs
♦ Display Type, Size: TFT, 3.4 in. (86.4mm)
DCS600
diagonal
♦ Display Resolution: 320 x 240 pixels
♦ Operating Temperature:
32° to 113°F (0° to 45°C)
♦ Grip Dimensions: 13.0 x 10.5 x 4.5 in.
(330 x 267 x 114mm)
♦ Grip Weight: 56 oz. (1587.57g)
♦ Power Source: 4 “AA” batteries (not included)
♦ Warranty: 1 year (limited)
INCLUDES:
Watertight grip, monitor and 1m camera-tipped
probe; Video cable; Set of three probe tip
accessories (45° mirror, pickup hook and
magnetic pickup); Hard plastic protective case;
User’s manual. DCS660 also includes 2GB
MicroSD memory card, USB cable
UPC
NO.
01514 8
01515 5
01596 4
DCS600
DCS660
P600-2 70 in. (1.8m) long, 9.8mm
diameter optional probe
P600-3 105 in. (2.7m) long, 9.8mm
diameter optional probe
01597 1
DCS660
General Tools & Instruments
5
HIGH-PERFORMANCE SYSTEMS
Video Borescopes
We Call Our Video Borescopes “High-Performance
Systems” for Several Good Reasons:
• They use our thinnest probes, with diameters as small
as 3.9mm (0.15 in.). Even our thickest general-purpose
high-performance probe, at 6mm across, is no thicker
than a No. 2 pencil lead.
DCS1800
High-Performance Wireless
Recording Video Borescope
System (See page 10)
• The probes have superior optical specs, including
close-focus and far-focus depths of field.
• Probe choices abound. Just pick the probe type
(flexible-obedient or soft metal), probe diameter
(3.9mm, 4.9mm, 5.5mm or 6m), probe length
(0.75 to 30m) and viewing angle (front view,
articulating or switchable front/side view) you
need; one of our probes is sure to fill the bill.
• The borescopes themselves also come in several
flavors—for example, wired or wireless, and recording
or non-recording. Whichever model you choose, your
high-performance borescope will have passed a
60,000-cycle performance test, sport a color monitor,
and come in a custom protective hard case.
Probe
Diameters
3.9mm
(actual size) (0.15 in.)
4.9mm
(0.19 in.)
5.5mm
(0.22 in.)
6mm
(0.24 in.)
+;<=2>?*0>@0A2A=45B>2
+X+$V(
)C<@3B;4+CD24E1CBF0AB3G
HCI232<<4'BAF2
'2J0I1<
'2<[email protected]<G
M00>4"2N23
&@2IB=CAF4$2>@2IB=KI2
+T!!"UV)
!'&WV
High-Performance Wireless
Recording Video Borescope
System with Articulating Probe
(See page 12)
)*+,/..
!"#$%&'(
(01234506
DCS1800ART
)*+,/..
)*+,/..#'$
!"#$%&'()*(+,-.'/0"('1'22/
!"#$%&'()*(+,-.'/0"('1'22/
3'.*(4"-#/5"4'*/6*('2.*7'/
3'.*(4"-#/5"4'*/6*('2.*7'/
892:'+/;":$/<(:".=1,:"-#/
892:'+
&(*>'
KLM/"-L/NOP++Q
KLM/"-L/NOP++Q
S7/:*/KK/):L/NEG+Q
S7/:*/KK/):L/NEG+Q
<=4"*T/U"4'*T/2:"11/"+,#'2
<=4"*T/U"4'*T/2:"11/"+,#'2
5"4'*V/KWG/X/WYG
8:"11/"+,#'2V/ZYG/X/YOG
5"4'*V/KWG/X/WYG
8:"11/"+,#'2V/ZYG/X/YOG
ELM[
@*-2*1'V/%Y\/:*/EYG\]/
N%WG\/:*/ZG\@Q^/
&(*>'V/KW\/:*/EKE\]/
NG\/:*/MM\@Q
ELM[
@*-2*1'V/%Y\/:*/EYG\]/
N%WG\/:*/ZG\@Q^/
&(*>'V/KW\/:*/EKE\]/
NG\/:*/MM\@Q
(2>0I;[email protected]=;40O4CAJ3K1214
WH6
WH6/
+)4JBI1G
!0P2I4+0KIJ2
3'.$,(#',>1'/_"%"*-/>,::'(9 3'.$,(#',>1'/_"%"*-/>,::'("'2
*2I=COCJB=C0A<
@DT/]@@T/3*!8
@DT/]@@T/3*!8
"C>C=214HBIIBA=;4$2I>
E/9',(
E/9',(
)CB>2=2I
MLM++/NGLWW/"-LQ
Z++/NGLWK/"-LQ
+=;32
]1'X">1'%a>'4"'-:
<(:".=1,:"-#
"2AF=Q
KLK/):L/NE+Q
KLK/):L/NE+Q
YZ\/N!*(QT/KY\/N5'(:QT/
YZ\/N!*(QT/KY\/N5'(:QT/
%C23140O4RC2P
MZ\/NJ",#Q
MZ\/NJ",#Q
GLWM/:*/EW/"-L/
)[email protected]=Q40O4%C231
GLWM/:*/EW/"-L/NZLY/:*/KGG++Q
NZLY/:*/KGG++Q
'2<C<=BAJ24=04
C&ZF
C&ZF
HB=2I?)K<=?&C3?SB<4
"CFQ=4+0KIJ2
Y/<4b=2:,>1'/;$":'/_DJ2
Y/<4b=2:,>1'/;$":'/_DJ2
)*+,-..
)*+,/..7$'8
0"('1'22/&(*>'/
!,-41'[email protected]*-:(*11'(A
R
S7/:*/KK/):L/NEG+Q
R
R
R
KW\/:*/EYG\]/
NG\/:*/ZG\@Q/
)*+,-..
B$'/5C&D3/EFGG/8=7'(/
!"#$%&'()*(+,-.'/5H</
3'.*(4"-#/5"4'*/6*('2.*7'/
892:'+/
KLM/"-L/NOP++Q
R
5"4'*T/2:"11/"+,#'2
J"271,9V/KWG/X/WYG
&(*>'/I/3'.*(4"-#V/ZYG/X/YOG
WLG[
@*-2*1'V/KW\/:*/EWW\]/
NG\/:*/MG\@Q/
&(*>'V/%Y\/:*/EYG\]/
N%WG\/:*/ZG\@Q
R
YH6
3'.$,(#',>1'/_"%"*-/>,::'(9
@DT/]@@T/3*!8
E/9',(
R
R
R
NYQ/`<<`/>,::'("'2
@DT/3*!8
E/9',(
MLM++/NGLWW/"-LQ
8*):/+':,1
KLK/):L/NE+Q
R
ZG\
R
GLWM/:*/EW/"-L/NZLY/:*/KGG++Q
R
C&ZF
R
/////
*Enables 4existing4 DCS1800ART
Articulating
Probe;
4 owners
4 to
4 add
4 4 a Non Articulating
4 Probe
4 4 or 4the P16HPART
4
4VGA resolution
4
4
DCS1800-TR
does4 not 4include
DCS1800
Receiving
Console
4
4
4
4
4
6
General Tools & Instruments
HIGH-PERFORMANCE SYSTEMS
Video Borescopes
DCS1600ART
High-Performance Recording
Video Borescope System with
Articulating Probe (See page 12)
DCS1700
The VIPER 1700 Super
High-Performance VGA
Recording Video
Borescope System
(See page 8)
DCS800
Rugged
High-Performance
VGA Recording
Video Borescope
System (See page 8)
DCS1600
High-Performance
Recording Video Borescope
System (See page 11)
)*+,9..
)*+/..
DPS16
)*+,9..
)*+,9..#'$
:,9
)!+,9
Pipe & Duct
Video
Recording
Borescope
Inspection
System
(See page 9)
/ /
)*+/..
!"#$%&'()*(+,-.'/
!"#$%&'()*(+,-.'/
&"7'/I/J=.:/3'.*(4"-#/
3=##'4/!"#$%&'()*(+,-.'/
3'.*(4"-#/5"4'*/6*('2.*7'/ !,-4$'14/3'.*(4"-#/5"4'*/
3'.*(4"-#/5"4'*/6*('2.*7'/
5"4'*/6*('2.*7'/C-27'.:"*-/
5H</3'.*(4"-#/5"4'*/
6*('2.*7'/@*-2*1'
892:'+/;":$/<(:".=1,:"-#/
892:'+
892:'+
6*('2.*7'/892:'+
&(*>'
/ /
/ /
/ /
/ /
KLM/"-L/NOP++Q
KLM/"-L/NOP++Q
KLM/"-L/NOP++Q
KLM/"-L/NOP++Q
KLM/"-L/NOP++Q
R
R
R
R
R
/ /
/ /
/ /
/ /
5"4'*T/2:"11/"+,#'2
5"4'*T/2:"11/"+,#'2
5"4'*T/2:"11/"+,#'2
5"4'*T/2:"11/"+,#'2
5"4'*T/2:"11/"+,#'2
&(*>'/I/J"271,9V/
5"4'*V/KWG/X/WYG
5"4'*V/KWG/X/WYG
5"4'*V/KWG/X/WYG
5"4'*V/KWG/X/WYG
KWG/X/WYG
8:"11/"+,#'2V/ZYG/X/YOG
8:"11/"+,#'2V/ZYG/X/YOG
8:"11/"+,#'2V/ZYG/X/YOG
8:"11/"+,#'2V/ZYG/X/YOG
3'.*(4"-#V/ZYG/X/YOG
ELM[
ELM[
ELM[
ELM[
MLG[
@*-2*1'V/%Y\/:*/EYG\]/
@*-2*1'V/%Y\/:*/EYG\]/
@*-2*1'V/%Y\/:*/EYG\]/
@*-2*1'V/KW\/:*/EYG\]/
N%WG\/:*/ZG\@Q^/
N%WG\/:*/ZG\@Q^/
@*-2*1'V/%Y\/:*/EYG\]
N%WG\/:*/ZG\@Q^/
NG\/:*/ZG\@Q/
&(*>'V/KW\/:*/EKE\]/
&(*>'V/KW\/:*/EKE\]/
N%WG\/:*/ZG\@Q/
&(*>'V/EY\/:*/EMO\]/
&(*>'V/%Y\/:*/EYG\]/
NG\/:*/MM\@Q
NG\/:*/MM\@Q
NG\/:*/FG\@Q
N%WG\/:*/ZG\@Q
WH6/
/
WH6/
/
WH6
WH6
/
/
/
/
/
/
3'.$,(#',>1'/_"%"*-/>,::'(9 3'.$,(#',>1'/_"%"*-/>,::'(9
3'.$,(#',>1'/_"%"*-/>,::'(9
3'.$,(#',>1'/_"%"*-/>,::'(9
/
/
/
@DT/3*!8
@DT/3*!8
@DT/3*!8
@DT/3*!8
/E/9',(
/E/9',(
/E/9',(
E/9',(
/
/
/ R /
MLM++/NGLWW/"-LQ
Z++/NGLWK/"-LQ
WO++/NELE/"-LQ
]1'X">1'%a>'4"'-:
<(:".=1,:"-#
R
]1'X">1'
/ /
/ /R
KLK/):L/NE+Q
KLK/):L/NE+Q
FW/):L/NWW+Q
YZ\/N!*(QT/KY\/N5'(:QT/
YZ\/N!*(QT/KY\/N5'(:QT/
R
EME\/
MZ\/NJ",#Q
MZ\/NJ",#Q
GLWM/:*/EW/"-L
GLWM/:*/EW/"-L/
R
GLY/"-L/NEG++Q/:*/"-)"-":9
NZLY/:*/KGG++Q
NZLY/:*/KGG++Q
C&ZF
Y/<4b=2:,>1'/;$":'/_DJ2
C&ZF
Y/<4b=2:,>1'/;$":'/_DJ2
Y/<4b=2:,>1'/;$":'/_DJ2
R
Y/<4b=2:,>1'/;$":'/_DJ2
R
C&ZO
R
O/<4b=2:,>1'/;$":'/_DJ2
/
/
YH6
/
/
Y/`<<`/>,::'("'2
/
@DT/3*!8
/ E/9',(
/
/
MLM++/NGLWW/"-LQ
]1'X">1'%a>'4"'-:
/ /
KLK/):L/NE+Q
YZ\/N!*(QT/KY\/N5'(:QT/
/
MZ\/NJ",#Q
GLWM/:*/EW/"-L/
/ /
/ /
NZLY/:*/KGG++Q
/
/
/
/
/
/
/ /
C&ZF
O/<4b=2:,>1'/;$":'/_DJ2
Y/<4b=2:,>1'/;$":'/_DJ2
Y/<4b=2:,>1'/;$":'/_DJ2
General Tools & Instruments
7
HIGH-PERFORMANCE SYSTEMS
VGA Capable Borescopes
THE VIPER 1700 VIDEO BORESCOPE SYSTEM – DCS1700
Ideal for inspecting inaccessible or hard-to-see areas.
FEATURES & BENEFITS:
• Records VGA resolution (640 x 480 pixel) video
clips and still images
• Probe features light boost, anti-reflection and
screen rotation
• Camera lighting provided by 4 front-facing LEDs
• To minimize glare from shiny targets, lighting
can be shifted to 2 angled LEDs
• Console features brightness controls, horizontal
mirroring, 2X zoom, and slow-motion and fastforward video playback
• Object measurement mode
• Console accepts dozens of different length and
diameter probes
• Probe and stainless steel camera head are IP67
water, oil and dust-proof
• Dual output jacks enable before/after image
comparisons
• Auto Power Off is time adjustable
• Includes 4GB SD memory card, video and USB
cables and hard case
DCS1700
INCLUDES:
Console, VGA Resolution Probe, 4GB SD Memory
Card, Object Measuring Tip, 110° Mirrored Viewing
Tip, Video Cable, USB Cable, 4 “AA” Alkaline
Batteries, Custom Hard Case, User’s Manual
SPECIFICATIONS:
♦ Display Size/Type:
3.5 in. (diagonal), color TFT LCD
♦ Display Resolution: 320 x 240 pixels (QVGA)
♦ Video/Photo File Format: .avi/.jpg
♦ Video Zoom Options: 1.5X, 2X
♦ Video Playback Speeds: 12%, 25%, 50%, 1X,
1.5X, 2X, 4X
♦ Video Out Formats: NTSC and PAL
♦ Video Frame Rate: 30 frames per second (fps)
♦ Probe Length/Type/Diameter: 39 in. (1m),
soft metal, 0.22 in. (5.5mm)
♦ Probe Depth of Field: 0.25 to 12 in.
(6.4 to 300mm)
♦ Probe Field of View: 60°
♦ Menu Languages: English, French, German,
Italian, Spanish, and Portuguese, as well as
21 other European and Asian languages
♦ Operating/Storage Temperatures:
Probe: -4° to 140°F (-20° to 60°C)
Console: 32° to 122°F (0° to 50°C)
♦ Dimensions of Grip:
10.8 x 4.8 x 2.2 in. (275 x 123 x 55mm)
♦ Weight of Grip (without Batteries): 13 oz. (370g)
♦ Power Source: 4 “AA” Alkaline batteries
(included)
♦ Optional Power Source: Rechargeable Ni-MH or
Li-ion “AA” batteries
♦ Battery Life (typical): 4 hours operation
♦ Warranty: 1 year (limited)
UPC
NO.
01601 5
DCS1700
RUGGED HIGH-PERFORMANCE VGA RECORDING VIDEO BORESCOPE
SYSTEM – DCS800
Ideal for inspecting hard-to-reach and hard-to-see areas.
DCS800
INCLUDES:
Console, 5.5mm diameter, 1m long QVGA
resolution flexible-obedient probe, 90° mirrored
viewing tip and thread protector ring, 4GB SD
memory card, AV and USB cables, (4) “AA”
Alkaline batteries, adjustable hand strap, custom
hard plastic carrying case, user’s manual
8
General Tools & Instruments
FEATURES & BENEFITS:
• 3.5 in. (89mm) diagonal color LCD
• 39 in. (1m) long, 0.22 in. (5.5mm) diameter
flexible-obedient probe with 320 x 240 pixel
(QVGA) resolution camera lit by four LEDs
• Console, probe, and stainless steel camera head
are IP55 water, oil and dust-proof. Console is
also 1m (39 in.) drop-proof
• Grip accepts dozens of other QVGA and VGA
(640 x 480 pixel) resolution probes of various
lengths and diameters
• Records VGA or QVGA resolution video clips and
still images using familiar menu-driven user
interface. Saved video and photo files
incorporate real-time brightness, zoom and
mirroring adjustments made prior to recording
or “on the fly”
• Three options for mirroring live video: horizontal,
vertical, or both
• 4GB SD memory card
• Analog video out jack and cable with RCA plug
• USB cable for uploading/viewing media on SD
card to PC without ejecting card
• 90° mirrored probe viewing tip
• Adjustable Auto Power Off interval
• Choice of 27 menu languages
• Custom hard plastic carrying case
• Powered by four “AA” Alkaline or rechargeable
batteries
SPECIFICATIONS:
♦ Display Resolution: 320 x 240 pixels (QVGA)
♦ Diameter of Camera Head with Thread Protector:
0.23 in. (6mm)
♦ Probe Depth of Field: 0.25 to 12 in.
(6.4 to 300mm)
♦ Probe Field of View: 46° (horizontal),
34° (vertical), 56° (diagonal)
♦ Video File Format: .avi
♦ Photo File Format: .jpg
♦ Video Zoom Options: 3.0X, 5.0X
♦ Video Out Formats: NTSC and PAL
♦ Video Frame Rate: 30 frames per second (fps)
♦ Compression Format: Compatible with MPEG4
♦ Probe Operating/Storage Temperature:
-4° to 140°F (-20° to 60°C)
♦ Console Operating Temperature: 32° to 140°F
(0° to 60°C)
♦ Dimensions of Console: 5.5 x 4.6 x 1.7 in.
(140 x 116 x 42mm)
♦ Weight of Console (without Batteries): 10.6 oz.
(300g)
♦ Power Source: (4) “AA” Alkaline or rechargeable
Ni-MH batteries
♦ Battery Life (typical): 4 hours operation
♦ Warranty: 1 year (limited)
UPC
NO.
01628 2
DCS800
HIGH-PERFORMANCE SYSTEMS
Pipe & Duct Recording Borescope
PIPE & DUCT VIDEO BORESCOPE INSPECTION SYSTEM – DPS16
Ideal for examining the interior of 2, 4 and 6 inch I.D. water and sewer pipes
with the included probe centering accessories
FEATURES & BENEFITS:
• 72 ft. (22m) long probe with 1.1 in. (28mm)
diameter camera head
• Eight super-bright white LEDs give probe
640 x 480 pixel (VGA) resolution; superior optics
yield excellent depth of field of 0.4 in. (10mm)
to infinity
• Includes H16 Handheld Recording Video
Borescope Console
• Probe is water-tight to IP68 standard (depth of
50 ft./10m) and is flexible enough to make two
90° bends
• Stainless steel camera head is immune to
bathroom toilet cleaner, unleaded gasoline,
brake/transmission fluid and machine oil
• Steel probe reel is sturdy and dust-tight to IP65
standard, works vertically or horizontally, and
holds DCS1600 console
INCLUDES:
• P16PIP Pipe & Duct Inspection Probe & Reel Set
(includes ring and brushes for centering probe
in 2 in., 4 in. and 6 in. pipes)
• Handheld Recording Video Borescope Console
(General Part No. H16)
• 2-GB SD memory card
• RCA cable for viewing video and images on an
NTSC monitor
• AC adapter/battery charger and cleaning cloth
and liquid for the console
• Custom hard carrying case
SPECIFICATIONS:
♦ Camera-Tipped Probe:
• Diameter: 0.23 in. (6mm)
• Length: 72 ft. (22m)
• Material: Fiberglass
A probe’s-eye view of
• Camera Head Diameter: 1.1 in. (28mm) a filthy
air-conditioning duct
• Light Source: 8 white LEDs
• Depth of Field: 0.4 in. (10mm) to infinity
• Field of View: 150.8° (diagonal)
• Minimum Bending Radius: 6 in. (150mm)
• Waterproof Depth (IP68): 50 ft. (10m)
• Operating Temperature:
14° to 158°F (-10° to 70°C)
• Warranty: 1 year (limited)
Reel:
• Frame Diameter: 11.8 in. (300mm)
• Dust and Water Resistance:
To IP65 standard
• Weight: 6.6 lb. (3kg)
Included Accessories:
Probe Centering Ring:
Inner Diameter: 1.1 in. (28mm)
Outer Diameter: 2 in. (50mm)
Small Probe Centering Brush:
A packaged DPS16 system
Inner Diameter: 1.1 in. (28mm)
Outer Diameter: 4 in. (100mm)
Large Probe Centering Brush:
Inner Diameter: 1.1 in. (28mm)
Outer Diameter: 6 in. (150mm)
UPC
NO.
01597 7
01578 0
DPS16
P16PIP
Eight super-bright white LEDs give the
DPS16/ P16PIP probe 640 x 480 pixel
(VGA) resolution
The DPS16/P16PIP probe is flexible enough
to make two 90° bends
in a 1.6 in. (40mm) diameter pipe
P16PIP
Probe, reel, ring and brushes are
available separately as P16PIP.
P16PIP is compatible with all systems
and system components shown in the
chart on pp. 6 – 7
DPS16
General Tools & Instruments
9
HIGH-PERFORMANCE SYSTEMS
Wireless Recording Borescope
High-Performance Wireless
Recording Video Borescope System
Features slim 5.5mm diameter probe, 3.5 in. color monitor
and powerful ability to record video, still images and sound.
Optional ultra-slim, multi-view and articulating probes available.
Applications:
• Government, Military, Security
• Infrastructure Inspection and Maintenance
• Aircraft Maintenance and Inspection
• Automotive Maintenance
• MRO / Industrial Inspection
• Inspection of Complex Machinery
• Oil, Power and Petro Industry Inspection Applications
• Inspection of Tooling Dies
DCS1800
Features:
• 3.5 in. (88.9mm) extra-wide, color TFT monitor with
super sharp clarity
Benefits:
• Records audio, video and still images with instant
playback review
• Wireless imaging allows inspection results
to be sent to a larger screen up to 150 ft.
away for team-based analysis
• Wireless image and video transfer
• Comes with a 1m (3.28 ft.) long, 5.5mm (0.22 in.)
diameter, flexible-obedient probe that retains its shape.
Depth of field is 0.25 to 12 in. (6.4 to 300mm)
• Optional probes include: 3.9mm diameter x 1m long ultraslim probe, 4.9mm x 1m long switchable front/side view
probe and 6.0mm x 1m long articulating probe
• All probes feature adjustable super-strength white LED
lights inside the tip for optimized illumination
• All probes are water, oil, dust and scratch resistant
to IP67 standards
• Wireless camera probe enables access
to otherwise inaccessible places
• Ultra slim probes with powerful video
camera and LED lights in the tip enable
user to inspect the tiniest spaces
• Optional 3.9mm (0.15 in.) diameter
camera tipped probe is the slimmest on
the market and can fit into the spark plug
hole of any engine, as well as into diesel
injector ports
• 3 interchangeable mirrored viewing tips provide
extra-wide viewing angles of 70º, 90º, 110º
• View findings in real time or record video
and still images for output later
• Multiple language menu
• Rechargeable batteries can record for
4 hours and will help you stay “Green”
• AV out allows for TV monitor and computer interfaces
• Rechargeable internal batteries
• Interchangeable accessories provide
additional function
• More value for your investment
Includes:
Custom Hard Case, 5.5mm Diameter x 1m
Long Flexible-Obedient Probe, 2GB SD Card,
RCA Cable, 3 Interchangeable Mirrored
Viewing Tips (70º, 90º, 110º), LCD Cleaning
Cloth, AC Adapter/Charger, 2 Rechargeable
Batteries, User’s Manual, 1 Year Warranty
(limited)
UPC
NO.
01297 0
01417 2
DCS1800
DCS1800ART (see page 12)
DCS1800, DCS1800ART, DCS1600, DCS1600ART Specifications:
DCS1800 and DCS1600 come with: 5.5mm (0.22 in.)
Diameter x 1m (3.28 ft.) long camera probe
DCS1800ART and DCS1600ART come with: 6mm
(0.24 in.) Diameter x 1m (3.28 ft.) long articulating
camera probe
Depth of Field (DOF): 0.25 to 12 in. (6.4 to 300mm)
Probe Feature: Water, Oil & Dust resistant
to IP67 standards
10
General Tools & Instruments
Field of View: Horizontal field angle 46°
Vertical field angle 34° Diagonal field angle 56°
Optional 5.5mm Probe Lengths:
2m, 3m, 5m, 10m, 30m
Additional Optional Probes:
• 3.9mm diameter x 0.75m (2.5 ft.) long ultra-slim
probe
• 4.9mm diameter x 1m long switchable
front/side view probe
• 6.0mm diameter x 1m long articulating probe
Display: 3.5 in. (88.9mm) Color TFT
Recording Resolution: 320 x 240 pixels (video);
640 x 480 pixels (still images)
Audio: (DCS1800 Only) Integrated microphone
Wireless Transceiver Frequencies: (DCS1800 Only)
2414MHz, 2432MHz, 2450MHz, 2468MHz
System Power: Battery: Rechargeable Li-Polymer
Battery (3.7V) Adapter/Charger Supply: 120VAC
@ 60 Hz or 240VAC @50 Hz
Power Consumption: 1.8A @5.5VDC
Recording Medium: 2GB SD Card
HIGH-PERFORMANCE SYSTEMS
Recording Borescope
High-Performance Recording
Video Borescope System
Features slim 5.5mm diameter probe, 3.5 in. color
monitor and powerful recording capability. Optional
ultra-slim, multi-view and articulating probes available.
Applications:
Benefits:
• Aircraft Maintenance and Inspection
• Military, Security, Law Enforcement
• Automotive / Diesel Maintenance
• Other High Level Inspection
• Ultra-slim probes with powerful
video camera and LED lights in
the tip enable access to otherwise inaccessible places
• Optional 3.9mm (0.15 in.)
diameter camera-tipped probe
is the slimmest on the market
and can fit into the spark plug
hole of any engine, as well as
into diesel injector ports
• View findings in real time or
record video and still images
for output later
Features:
• 3.5 in. (88.9mm) extra-wide, color TFT monitor with
super sharp clarity
DCS1600
• Rechargeable batteries can
record for 4 hours and will
help you stay “Green”
• Records video and still images with instant playback
review
• Comes with a 1m (3.28 ft.) long, 5.5mm (0.22 in.)
diameter, flexible-obedient probe that retains required
shape. Depth of field is 0.25 to 12 in. (6.4 to 300mm)
• Interchangeable accessories
provide additional function
• More value for your investment
• Optional probes include: 3.9mm diameter x 1m long
ultra-slim probe, 4.9mm x 1m long switchable
front/side view probe and 6.0mm x 1m long
articulating probe
• All probes feature adjustable super-strength white
LED lights inside the tip for optimized illumination
• All probes are water, oil, dust and scratch resistant
to IP67standards
Includes:
• 3 interchangeable mirrored viewing tips provide
extra wide viewing angles of 70º, 90º, 110º
Custom Hard Case, 5.5mm Diameter x 1m Long FlexibleObedient Probe, 2GB SD Card, RCA Cable, USB Cable,
3 Interchangeable Mirrored Viewing Tips (70º, 90º, 110º),
LCD Cleaning Cloth, AC Adapter/Charger, Rechargeable
Battery, User’s Manual, 1 Year Warranty (limited)
• Multiple language menu
• TV monitor and USB computer interfaces
• Rechargeable internal battery
UPC
NO.
01305 2
01416 5
DCS1600
DCS1600ART (see page 12)
DCS1800, DCS1800ART, DCS1600, DCS1600ART Specifications: (cont.):
Video Out Format: NTSC and PAL
Exposure: Automatic
Interface: AV Out on 1800 and 1600 systems.
USB also on 1600.
White Balance: Fixed
Storage Environment: -4° to 140°F
(-20° to 60°C)
S/N Ratio: 42dB or more
Recharge Environment: 32° to 104°F
(0° to 40°C)
Image Resolution: 640 x 480 Pixels
Languages: English, German, French, Spanish, Japanese,
Italian, Traditional Chinese, Simplified Chinese
Interchangeable Options:
Video Resolution: 320 x 240 Pixels
Operating Environment: -4° to 140°F (-20° to 60°C)
Set of 3 Mirrored Viewing Tips For All
5.5mm Probes except P16181/2/3HP
No. PM003 (70°, 90°, 110°)
Compression Format: Compliant with MPEG4
Frame Rate: ~30 fps
General Tools & Instruments
11
HIGH-PERFORMANCE SYSTEMS
Articulating Probe Borescopes
High-Performance Video Borescope
Systems with Articulating Probe
RoHS
Applications:
Ideal for aircraft maintenance, machinery and
production line inspection, petro-chemical and
power plant inspection, general MRO and
facility management
Features:
• One-handed articulation function allows
user to turn the probe tip to inspect targets
located at sides or at an angle while it is
inside a tight space
• Turning knob and lock button are
ergonomically engineered
DCS1800ART
(The DCS1800 Receiving Console
with the P18ART-1SM Probe)
• Durable materials and construction: all
components pass 60,000 cycle test
Specifications:
Articulation Angle: 2 way
Articulation Sweep: 0 to ± 150°
Supplied Probe: 6mm (0.23 in.) diameter x 1m
(3.28 ft.) long, articulating soft metal probe
RoHS
DCS1600ART
(The DCS1600 Handheld Recording Console
with the P16ART-1SM probe)
12
General Tools & Instruments
HIGH-PERFORMANCE SYSTEMS
Handheld Consoles
DCS1600 Handheld Recording Console
Add any QVGA (320 x 240 pixel) or VGA (640 x 480 pixel)
resolution probe from General to create a highperformance video borescope inspection system
Features & Benefits:
• View hard-to-see and hard-to-reach areas on 3.5 in. (88.9mm)
diagonal color monitor
• Record .avi video clips and .jpeg still images on removable SD cards.
Review them instantly on-screen or later on your PC.
• Familiar menu/sub-menu user interface in choice of five languages
• Rechargeable Li-ion battery lasts for four hours
• TV Out (NTSC or PAL format) and USB jacks
Applications:
• Aircraft/vehicle inspection, maintenance and repair activities
• Military, security/law enforcement tasks
• Video/photo documentation of conditions and work
Includes:
H16
2GB SD Card, Video and USB Cables, Rechargeable Li-ion Battery,
AC Adapter/Charger, Custom Protective Hard Case, User’s Manual,
1 Year Warranty
RoHS
Wireless Probe Handle/Controller
Makes a DCS1800ART system compatible with a nonarticulating probe or the P16HPART VGA Resolution
Articulating Probe. (Does not include the DCS1800
Receiving Console.)
Includes:
1 Year Warranty
RoHS
DCS1800-TR
General Tools & Instruments
13
VIDEO INSPECTION SYSTEMS
The SEEKER™ Series Scopes
From our affordable DCS050 to our feature-packed SEEKERTM 400 Series, this line of camera scopes is designed to appeal to
everyone from experienced automotive mechanics and HVAC/R technicians to DIY weekend warriors.
DCS350
The SEEKER™ 350
Rugged Recording
Video Inspection
System
(See Page 16)
DCS660
SeaScope™ 660 Waterproof
Recording Video Inspection
System (See Page 5)
DCS400 Series
The SEEKER™ 400 Series Wireless
Recording Video Inspection
Systems (See page 19)
DCS300 Series
The SEEKER™ 300
Video Inspection Systems
(See page 19)
DCS280
The SEEKER™ 280 Rugged
Video Inspection System
(see Page 17)
DCS600
PRIMARY
SYSTEM
FEATURES
Waterproof
Recording
Waterproof
Non-recording
Rugged
Recording
Rugged
Non-recording
SeaScope™ 600 Waterproof
Video Inspection System
(See Page 5)
Model No.
DCS660
DCS600
DCS350
DCS280
System Name
SeaScopeTM 660
Waterproof Recording
Video Inspection System
SeaScopeTM 600
Waterproof
Video Inspection System
The SEEKER™ 350
Rugged Recording
Video Inspection System
The SEEKER™ 280
Rugged
Video Inspection System
Display
Records
3.4 in. color LCD
Video and still images
3.4 in. color LCD
_
3.5 in. color LCD
Video and Still Images
2.4 in. color LCD
_
Resolution (pixels)
Live video: 320 x 240
Still images: 720 x 480
Live video: 320 x 240
Live video: 320 x 240
Still images: 720 x 480
Live video: 320 x 240
SYSTEM
SEEKER
Probe
Diameters
(actual size)
™
Video Controls
Memory (capacity of
included SD card)
5.5mm
(0.22 in.)
9.0mm
(0.35 in.)
SUPPLIED
PROBE
12mm
(0.47 in.)
14
General Tools & Instruments
4X Zoom, 180° rotation, Pan 4X Zoom, 180° rotation, Pan
4X Zoom, 180° rotation
2GB + 64MB Internal
Flash Memory
2X Zoom, 180° rotation
2GB
_
_
!"#$%&'"(%)$
*&+,,+&-.//$%0$1
*&+,,+&-.//$%0$1
*&+,,+&-.//$%0$1
*&+,,+&-.//$%0$1
Limited Warranty Term
1 year
1 year
3 years
3 years
Diameter
9.8mm
9.8mm
12mm
9mm
Type
Length
Field of View
Flexible-Obedient
3.28 ft. (1m)
54°
Flexible-Obedient
3.28 ft. (1m)
54°
Flexible-Obedient
3.28 ft. (1m)
60°
Flexible-Obedient
3.28 ft. (1m)
60°
Depth of Field
0.6 to 6 in.
0.6 to 6 in.
1 to 12 in.
1 to 12 in.
Resistance to
Water and Dust
IP67
(entire unit)
IP67
(entire unit)
IP67
(Probe only)
Unit is 1m drop-proof
IP67
(Probe only)
Unit is 1m drop-proof
Light Source, Lens Material,
Camera Head Material
4 LEDs, Glass,
Anodized Aluminum
4 LEDs, Glass,
Anodized Aluminum
2 LEDs, Plastic
4 LEDs, Glass,
Anodized Aluminum
VIDEO INSPECTION SYSTEMS
The SEEKER™ Series Scopes
TM
Probe Options for The SEEKER Video Inspection Systems
Model No.
P230-1
P230-1F
P230-1X
P230-2X
P230-3X
P495-1N
P495-2N
P495-3N
P455-1N
P455-2N
P455-3N
DCS200 Series
The SEEKER™ 200 Series
Video Inspection Systems
(See page 19)
DCS100
The SEEKER™ 100
Wireless USB Video
Inspection System
(See page 18)
UPC
01386 1
01474 5
01387 8
01390 8
01391 5
01423 3
01467 7
01468 4
01466 0
01469 1
01470 7
Diameter
Length
12mm (0.47 in.)
12mm (0.47 in.)
12mm (0.47 in.)
12mm (0.47 in.)
12mm (0.47 in.)
9mm (0.35 in.)
9mm (0.35 in.)
9mm (0.35 in.)
5.5mm (0.22 in.)
5.5mm (0.22 in.)
5.5mm (0.22 in.)
Description
Flexible-Obedient Probe - Close Focus*1
Flexible-Obedient Probe - Far Focus*2
Flexible-Obedient Probe Extension
Flexible-Obedient Probe Extension
Flexible-Obedient Probe Extension
Flexible-Obedient Probe
Flexible-Obedient Probe
Flexible-Obedient Probe
Flexible-Obedient Probe
Flexible-Obedient Probe
Flexible-Obedient Probe
1m (3.28 ft.)
1m (3.28 ft.)
1m (3.28 ft.)
2m (6.6 ft.)
3m (9.8 ft.)
1m (3.28 ft.)
2m (6.6 ft.)
3m (9.8 ft.)
1m (3.28 ft.)
2m (6.6 ft.)
3m (9.8 ft.)
*1–General’s 12mm close-focus probe has a defined depth of field of 0.25 to 4 in. (6.4 to 101.6mm)
*2–General’s 12mm far-focus probe has a minimum focal distance of 4 in. (101.6mm) and is in focus from there to 8 ft. (2.4m)
TM
Accessories for The SEEKER Video Inspection Systems
Model No.
DCS050
The SEEKER™ 050
USB Video
Inspection System
(See page 18)
UPC
Diameter
Description
RCV100
01446 2
ADP05V
01497 4
–
PT12
01559 9
12mm (0.47 in.)
PT9
01560 5
9mm (0.35 in.)
PT5
01561 2
5.5mm (0.22 in.)
Wireless USB Video Receiver
for The SEEKERTM 100 & 400 Systems
Car charger for DCS400 and DCS100 series
Mirror, magnet and hook accessories for
DCS200, DCS300 and DCS400
Mirror, magnet, hook and thread protector
accessories for DCS200-09 and DCS400-09
Mirror, guide ball and thread protector
accessories for DCS200-05, DCS355 and DCS400-05
–
Wireless
Recording
Video Over Internet
Utility
Non-Recording
Utility
Non-Recording
Wireless
USB
Video Over Internet
Utility
USB
DCS400
DCS400-09
DCS400-05
DCS300
DCS355
DCS200
DCS200-09
DCS200-05
DCS100
DCS050
DCS050-09
The SEEKER™ 400 Series
Wireless Recording
Video Inspection Systems
The SEEKER™ 300 Series
Video Inspection Systems
The SEEKER™ 200 Series
Video Inspection Systems
The SEEKER™ 100
Wireless USB
Video Inspection System
The SEEKER™ 050 Series
USB
Video Inspection Systems
2.4 in. color LCD
_
User’s computer
Video and still images
User’s computer
Video and still images
Live video: 320 x 240 (DCS200),
160 x 120 (DCS200-05)
Live video: 640 x 480
Still images: 640 x 480
Live video: 640 x 480,
Still images: 640 x 480
2X Zoom, 180° rotation
Via user’s computer
Via user’s computer
_
_
_
?&[email protected]+&-.//$%:
2$)3.%4$.56$&7080"9&-.//$%:
&
,;<&,=.>/$%;<3.%4$%
B"&5.//$%:&9$$=$=&
1 year (hardware only)
1 year (hardware only)
12mm
DCS050 - 12mm
DCS050-09 - 9mm
Flexible-Obedient
3.28 ft. (1m)
60°
Flexible-Obedient
3.28 ft. (1m)
60°
4 in. to 8 ft.
DCS050 - 4 in. to 8 ft.
DCS050-09 - 1 to 12 in.
3.5 in. color LCD
3.5 in. color LCD
Video and still images
_
Live video: 320 x 240 (DCS400,
Live video: 320 x 240 (DCS300),
DCS400-09), 160 x 120 (DCS400-05)
160 x 120 (DCS355)
Still images: 720 x 480
4X Zoom, 180° rotation
2X Zoom, 180° rotation
2 GB
2$)3.%4$.56$&7080"9&-.//$%:
,;<&,=.>/$%;<3.%4$%
3 years
DCS400 - 12mm
DCS400-09 - 9mm
DCS400-05 - 5.5mm
Flexible-Obedient
3.28 ft. (1m)
60°
DCS400 - 1 to 12 in.
DCS400-09 - 1 to 12 in.
DCS400-05 - 0.25 to 4 in.
_
?&[email protected]+&-.//$%:
3 years
DCS300 - 12mm
DCS355 - 5.5mm
Flexible-Obedient
3.28 ft. (1m)
60°
DCS300 - 4 in. to 8 ft.
DCS355 - 0.25 to 4 in.
&
&
3 years
DCS200 - 12mm
DCS200-09 - 9mm
DCS200-05 - 5.5mm
Flexible-Obedient
3.28 ft. (1m)
60°
DCS200 - 4 in. to 8 ft.
DCS200-09 - 1 to 12 in.
DCS300-05 - 0.25 to 4 in.
&
IP67
(Probe only)
IP67
(Probe only)
IP67
(Probe only)
IP67
(Probe only)
IP67
(Probe only)
2 LEDs, Plastic (DCS400);
4 LEDs, Glass, Anodized Aluminum
(DCS400-09, DCS400-05)
2 LEDs, Plastic (DCS300);
4 LEDs, Glass, Anodized
Aluminum (DCS355)
2 LEDs, Plastic (DCS200);
4 LEDs, Glass, Anodized Aluminum
(DCS200-09, DCS200-05)
2 LEDs, Plastic
2 LEDs, Plastic (DCS050);
4 LEDs, Glass, Anodized
Aluminum (DCS050-09)
SEEKER™
Probe
Diameters
(actual size)
&
&
&
5.5mm
(0.22 in.)
9.0mm
(0.35 in.)
12mm
(0.47 in.)
General Tools & Instruments
15
VIDEO INSPECTION SYSTEMS
Rugged Recording Scope
RUGGED RECORDING VIDEO INSPECTION SYSTEM – DCS350
Ideal for rugged recording with voice annotation, internal memory and removable
SD card
FEATURES & BENEFITS:
• Includes long (1m/39 in.), thin (12mm/0.47 in.)
diameter, flexible-obedient camera-tipped probe
for looking deep into tight spaces. Also available
are longer and thinner (9mm and 5.5mm)
probes, and probe extensions that extend
inspection range to 16 ft. (5m).
• All probes and extensions are oil, water and
dust-proof to IP67 standard. The DCS350’s grip
and monitor are double-molded, making them
drop-proof to 1m (39 in.) height and IP54
splash-proof.
• Has a 64MB internal memory for added
versitility and convenience
• Has a built-in microphone to enable voice
annotation of video recordings
• Also includes a 2GB MicroSD card (upgradeable
to 16GB), and a USB jack to facilitate photo and
video transfer
• 3.5 in. (89mm) diagonal color LCD shows
crystal-clear videos and images
• One-button video start/stop and photo capture
• Image flip and 1 - 4X zoom buttons
• Two adjustable LEDs illuminate dark areas
• TV Out jack and included cable send video
and images to larger monitor
• Includes three probe tip accessories (magnetic
pickup, pickup hook and 45° mirror)
• Adjustable Auto Power Off interval
• Comes in custom molded hard carrying case
• Powered by Alkaline or rechargeable
“AA” batteries
• Choice of five menu languages
• 3 Year Warranty
SPECIFICATIONS:
♦ Display Size/Type:
3.5 in. (89mm) diagonal TFT color LCD
♦ Display Resolution: 320 x 240 pixels
♦ Monitor Controls:
180° flip, 1 to 4X zoom in 0.5 steps, brightness
+ and –, start/stop video recording, take picture
♦ Probe Diameter/Type:
12mm (0.47 in.) flexible-obedient
♦ Probe Length: 1m (39 in.)
♦ Probe Field of View: 60°
♦ Probe Depth of Field: 1 to 12 in. (25 to 300mm)
♦ Camera Light Source:
2 adjustable-brightness white LEDs
♦ Impact Resistance: To height of 1m (39 in.)
♦ Water, Dust, Splash Resistance Levels:
Camera-tipped probe designed to meet IP67;
Grip and monitor designed to meet IP54
♦ Operating Temperature/Humidity:
32° to 113°F (0° to 45°C) @ 5 to 95% RH
♦ Internal Flash Memory Capacity: 64MB
♦ Maximum SD Card Capacity: 16GB
♦ Video Compatibilities: NTSC and PAL
♦ Video Resolution/File Type: 320 x 240 pixels/.avi
♦ Still Image Resolution/File Type:
640 x 480 pixels/.jpg
♦ PC Interface: USB2.0
♦ Menu Languages:
English, French, Spanish, Portuguese,
Mandarin Chinese
♦ Dimensions of Grip:
10.6 x 3.0 x 4.0 in. (270 x 75 x 100mm)
♦ Weight of Grip: 1 lb. (454g)
♦ Power Source:
4 “AA” or rechargeable batteries (included)
♦ Warranty: 3 years (limited)
INCLUDES:
• 1m (39 in.) Long, 12mm (0.47 in.)
Diameter Camera-tipped Probe,
Wand-type Grip and 3.5 in. (89mm)
Color LCD
• 2GB MicroSD Card
• Three Probe Tip Accessories (Magnetic Pickup,
Pickup Hook, 45° Mirror)
• ScopeView Video/Image Display Software
+ Driver on Mini-CD
• 4 “AA” Batteries
• Custom Hard Case
• User’s Manual
UPC
NO.
01582 7
DCS350
DCS350
Inspecting a crawl space the quick and easy way
16
General Tools & Instruments
Avoid the time and hassle of engine teardowns
Find blockages or broken registers in A/C ductwork
VIDEO INSPECTION SYSTEMS
Rugged Non-Recording Scope
RUGGED NON-RECORDING VIDEO INSPECTION SYSTEM – DCS280
Ideal for real time and non-recorded applications
FEATURES & BENEFITS:
• Big, bright color LCD for crystal-clear real-time
video imaging
• 9mm (0.35 in.) diameter x 1m (39 in.) long
camera-tipped probe is thin enough to fit into
very narrow spaces
• 2m and 3m long, 9mm diameter probes are
available
• Super thin 5.5mm dia. probes in 1m, 2m and
3m lengths are also available
• All probes are oil, water and dust-proof to IP67
standard. The DCS280’s wand-type grip and
monitor are IP54 splash-proof.
• Four adjustable LEDs in camera head illuminate
dark areas
• Unit is drop-resistant to 1m height and comes
in a protective hard case
• Invert what you see 180° to read labels rightside up and ZOOM video up to 200% to show
details
• Pays for itself quickly: Avoid the cost and
trouble of tearing down engines
• One-handed operation frees your other hand
to use tools
• AV Out jack enables video connection to any
NTSC television
• Includes four useful probe tip accessories
• 3 year limited warranty
APPLICATIONS:
• Inspecting cylinders, valves, diesel injectors
and glow plugs
• Viewing behind body panels and under the
dashboard for electrical wiring and connections
problems
• Examining for corrosion and wear in
hard-to-see areas
• Inspecting fluid lines and leaks
SPECIFICATIONS:
♦ Display Size/Type: 2.4 in. (61mm) diagonal TFT
color LCD
♦ Display Resolution: 320 x 240 pixels
♦ Monitor Controls: 180° flip, 1 to 2X zoom in
0.2 steps, brightness + and –
♦ Probe Diameter/Type: 9mm (0.35 in.) flexible-
obedient
♦ Probe Length: 1m (39 in.)
♦ Probe Field of View: 60°
♦ Probe Depth of Field: 1 to 12 in. (25 to 300mm)
♦ Camera Light Source: 4 adjustable-brightness
white LEDs
♦ Impact Resistance: To height of 1m (39 in.)
♦ Water, Dust, Splash Resistance Levels:
Camera-tipped probe designed to meet IP67;
Grip and LCD designed to meet IP54
♦ Operating Temperature/Humidity:
32° to 113°F (0° to 45°C) @ 5 to 95% RH
♦ Dimensions of Console:
10 x 3.6 x 2.3 in. (254 x 91 x 58mm)
♦ Weight of Console: 1 lb. (454g)
♦ Dimensions of Case:15 x 11 x 3.5 in.
(381 x 279 x 89mm)
♦ Weight of Case and Contents: 4 lb. (1.8 kg)
♦ Power Source: 4 “AA” batteries (included)
♦ Warranty: 3 years (limited)
UPC
NO.
01572 8
DCS280
INCLUDES:
• Video Inspection System with Wand-type Grip
and 2.4 in. (61mm) Color LCD
• 1m (39 in.) Long, 9mm (0.35 in.) Diameter
Flexible-obedient Probe
• Four Probe Tip Accessories (Thread Protector,
Magnetic Pickup, Pickup Hook, 45° Mirror)
• 4 “AA” Batteries
• Custom Hard Case
• User’s Manual
DCS280
Long, thin probe reaches deep into tight spaces
The rugged DCS280 shrugs off the accidental
bumps typical of industrial work
Any splashes from this wastewater plant
would roll off the DCS280’s back
Perfect for driveway mechanics
General Tools & Instruments
17
VIDEO INSPECTION SYSTEMS
SEEKER™ Series
THE SEEKER™050 USB VIDEO INSPECTION SYSTEMS
Features a 12mm (0.47 in.) or 9mm (0.35 in.) diameter, 1m long waterproof camera
probe with a USB connection to view images and video on your computer.
DCS050
FEATURES:
• USB computer interface
• Works with Windows® 7, Windows® Vista and
Windows® XP†
• Very affordable
• High-resolution video and still images
• Adjustable light intensity from two built-in LEDs
• 1m (3.28 ft.) flexible-obedient probe retains
configured shape to suit various applications
• Probe is water, oil and dust proof to IP67
standards
INCLUDES:
Scope Handle with Fixed 1m Long FlexibleObedient Probe, User’s Manual, 1 Year Limited
Warranty (Hardware Only)
UPC
NO.
PROBE DIAMETER
01445 5
01484 4
DCS050
DCS050-09
12mm (0.47 in.)
9mm (0.35 in.)
†Windows® 7, Windows® Vista and Windows® XP
are registered trademarks of Microsoft Corporation
THE SEEKER™100 WIRELESS VIDEO INSPECTION SYSTEM
Wirelessly transmits video and images to your computer up to 33 feet away; included
software enables streaming video for remote viewing over the Internet.
DCS100
FEATURES:
• Built-in radio transmitter wirelessly transmits
live video signal to the RCV100 USB video
receiver up to 10m away, enabling the video to
be viewed on a Windows PC and streamed live
over the Internet
• Works with Windows® 7, Windows® Vista and
Windows® XP†
• 12mm (0.47 in.) diameter, 1m (3.28 ft.) long,
flexible-obedient, far focus*2 camera-tipped
probe is water, oil and dust proof to IP67
standards
• Optional probe extensions of 1m, 2m, and 3m
(3.28 ft., 6.56 ft., 9.84 ft.) are available for the
12mm probe
• In addition to the standard 12mm (0.47 in.)
diameter far-focus*2 probe, the DCS100 handle
can also accept optional 9.0mm (0.35 in.) and
5.5mm (0.22 in.) diameter close-focus*1
camera-tipped probes
• Adjustable light intensity from built-in LEDs
• Flexible-obedient probes retain configured shape
INCLUDES:
Custom Hard Case, Transmitter Handle with
12mm Diameter x 1m Long, Flexible-Obedient
Probe, 3 Accessory Tools: (45° Mirror, Magnetic
Pick-Up, Pick-Up Hook), RCV100 Wireless USB
Video Receiver, USB Extension and Video Cables,
Software on Mini-CD, User’s Manual, 1 Year
Limited Warranty (Hardware Only)
UPC
NO.
PROBE DIAMETER
01443 1
DCS100
12mm (0.47 in.)
*1—General’s 12mm close focus probe has a defined depth of
field of 0.25 to 4 in. (6.4 to 101.6mm)
*2—General’s 12mm far focus probe has a minimum focal
distance of 4 in. (101.6mm) and is in focus from there to
8 ft. (2.4m)
WIRELESS USB VIDEO RECEIVER
Unique device wirelessly interfaces The Seeker™100 or The Seeker™400 Video
Inspection System to any Windows computer via its USB2.0 port from up to 33 ft. away.
Once the connection is made, real-time inspection video and still images captured by
the Seeker can be viewed and stored on the PC. Skype™-enabled ScopeView™ media
management software included with the RCV100 allows inspection video to be
streamed over the Internet to support videoconferencing and remote diagnostics.
RCV100
18
General Tools & Instruments
FEATURES:
• Skype-enabled streaming video
receiver sends live video over the Internet
• Includes easy-to-use, powerful software
• USB 2.0 interface
• Works with DCS100 and DCS400 series to
enable remote video presentations and live
video troubleshooting and training
• 4 channel selection, enabling the user to select
uncluttered radio bands
INCLUDES:
Receiver, USB Extension Cable, Video Cable,
Software on Mini-CD, User’s Manual, 1 Year
Limited Warranty
UPC
NO.
01446 2
RCV100
VIDEO INSPECTION SYSTEMS
SEEKER™ Series
THE SEEKER™200 SERIES VIDEO INSPECTION SYSTEMS
Compact video camerascopes for the visual inspection of inaccessible areas.
FEATURES:
• View inspection video instantly on the 2.4 in.
(60.9mm) color LCD
• Separate monitor buttons for 2x zoom and
180° image flip
• System includes a 1m (3.28 ft.) long, flexibleobedient, camera-tipped probe
• Probes are flexible, strong and slim enough to
perform automotive engine check-up
• Flexible-obedient probes retain configured shape
to suit different inspection needs
• Probes are water, oil and dust proof to IP67
standards
• Optional 12mm probe extensions of 1m, 2m,
and 3m (3.28 ft., 6.6 ft., 9.9 ft.) are available for
maximum extension of up to 5m (16 ft.)
INCLUDES:
Custom Hard Case, Pistol Grip Camera
Handle with 1m Long, Flexible-Obedient Probe,
3 Accessory Tools, 1 “9V” Battery,
Mini-Screwdriver, User’s Manual,
3 Year Limited Warranty
UPC
NO.
PROBE DIAMETER
01372 4
01494 3
01482 0
DCS200
DCS200-05
DCS200-09
12mm (0.47 in.)
5.5mm (0.22 in.)
9mm (0.35 in.)
DCS200
THE SEEKER™300 WIRELESS VIDEO INSPECTION SYSTEMS
Compact video camerascopes for the visual inspection of inaccessible areas.
FEATURES:
• View inspection video instantly on the 3.5 in.
(88.9mm) color LCD screen
• Separate monitor buttons for 2x zoom and
180° image flip
• System includes a 1m (3.28 ft.) long, flexibleobedient, camera-tipped probe
• Camera-tipped probes have built-in adjustable
LED lighting
• Probes are flexible, strong and slim enough to
perform automotive engine check-up
• Interchangeable probes are water, oil and dust
proof to IP67 standards
INCLUDES:
Custom Hard Case, Pistol Grip Camera Handle
with 1m Long, Flexible-Obedient Probe,
3 Accessory Tools, 1 “9V” Battery,
Mini Screwdriver, User’s Manual,
3 Year Limited Warranty
UPC
NO.
PROBE DIAMETER
01373 1
01472 1
DCS300
DCS355
12mm (0.47 in.)
5.5mm (0.22 in.)
DCS300
THE SEEKER™400 WIRELESS RECORDING VIDEO INSPECTION SYSTEMS
Wireless interface with optional RCV100 module enables streaming of live inspection
video over the Internet.
FEATURES:
• 3.5 in. (88.9mm) diagonal TFT-LCD Wireless
Color Monitor can be detached from the unit for
remote viewing up to 10m (33 ft.) away
• Monitor features 4x zoom and 180° image flip
features
• System includes a 1m (3.28 ft.) long, flexibleobedient, camera-tipped probe
• Both monitor and handle use rechargeable
Lithium-Ion batteries which can be charged at
the same time using the included one-into-two
charging cable
• View inspection video in real time, record video
and capture/save still photos as JPEGs with
instant playback review. Up to 3 hours
of video (AVI)
• NTSC or PAL compatible
• Built-in magnets and stand facilitate hands-free
operation
• Choice of 5 menu languages: English, French,
Spanish, Chinese and Portuguese
• Interchangeable probes in multiple sizes
INCLUDES:
Custom Hard Case, Pistol Grip Camera Handle
with 1m Long, Flexible-Obedient Probe,
Detachable Wireless Monitor, 2GB Micro SD
Memory Card, 3 Accessory Tools, USB and
Video Interconnect Cables, Built-in Magnets,
2 Lithium-Ion Rechargeable Batteries with
AC Adapter/Charger, User’s Manual,
3 Year Limited Warranty
UPC
NO.
PROBE DIAMETER
013717
01447 9
01426 4
DCS400
DCS400-05
DCS400-09
12mm (0.47 in.)
5.5mm (0.22 in.)
9mm (0.35 in.)
DCS400
General Tools & Instruments
19
TEMPERATURE
Infrared Thermometers
Cold or hot . . . it matters not . . .
to General’s extended family of point-andshoot infrared thermometers. From our
affordable IRT105 to our 12:1 (D:S) IRT657
and IRT659K, there’s an IRT with your name
and application on it. Just pick a Distance-toSpot ratio and a temperature range and begin
firing away.
IRT207
IRTC50
Mid-Range
8:1 D:S
Energy Audit
8:1 D:S
IRT657
IRT659K
Wide Range
12:1 D:S
Dual Sensor
Adj. Emissivity
12:1 D:S
IRT105
Pocket Sized
6:1 D:S
SPECIFICATIONS
MODEL NO.
HEAT SEEKER™
IRT207
THERMO SEEKER™
IRTC50
Name
6:1 Pocket
Infrared
Thermometer
8:1 Mid-Range
Infrared
Thermometer
Energy Audit IR
Thermometer/Scanner
with Star Burst Laser
Targeting
Temperature
Measurement Range
-22° to 482°F
(-30° to 250°C)
-4° to 604°F
(-20° to 317°C)
-40° to 428°F
(-40° to 220°C)
-40° to 1076°F
(-40° to 580°C)
Distance to Spot Ratio
Resolution
Accuracy
6:1
0.1°F (0.1°C)
±2% of reading
or ±5°F/±3°C (max),
whichever is greater
8:1
0.1°F (0.1°C)
±2% of reading
or ±4°F/±2°C
(whichever is greater)
8:1
0.1°F (0.1°C)
±2% of reading or ±3°F (2°C)
(when T>32°F)
±3% of reading or ±5°F (3°C)
(when T ≤32°F)
12:1
0.1°F (0.1°C)
±3°F(2°C) or
±2% of reading
Emissivity
Adjustable from 0.1 to 1.0
in 0.01 steps
Fixed at 0.95
Fixed at 0.95
Fixed at 0.95
Display
Laser Targeting
Auto Power Off
Other Important
Features
Backlit LCD
Yes
Yes
Min/Max
Measurement Mode
Measurement Lock Mode
Backlit LCD
Yes
Yes
Data Hold
Backlit LCD
Yes
Yes
Green/red/blue indication of
normal/hot/cold
1°, 5° or 10°F setpoint
bandwidth
Star Burst Laser Targeting
Data Hold
Backlit LCD
Yes
Yes
Low Battery indication
Over-range indication
Star Burst Laser Targeting
Backlit LCD
Yes
Yes
Automatically stores last
10 readings, Displays
Min/Max/Avg/Dif session
values, Settable high and low
temperature alarms, Star
Burst Laser Targeting
Wrist strap
“9V” battery
User’s manual,
1 year warranty
“9V” battery
User’s manual,
1 year warranty
“9V” battery
User’s manual,
1 year warranty
1 “9V” battery
User’s manual
Soft carrying pouch,
1 year warranty
"K" type thermocouple with
0° to 500°F (-18° to 260°C)
range, "9V" battery, nylon
pouch, user's manual,
1 year warranty
Accessories Included
20
General Tools & Instruments
WIDE RANGE
IRT657
DUAL SENSOR
IRT659K
THERMO SEEKER™
IRT105
12:1 Infrared
12:1 Wide-Range Infrared
Thermometer with “K”
Thermometer with
Type Thermocouple and
Star Burst Laser
Adjustable Emissivity
Targeting
IRT: -58° to 1202°F
(-50° to 650°C);
“K” Port: -146° to 2498°F
(-99° to 1370°C)
12:1
0.1°F (0.1°C)
IRT: ±3°F (2°C) or ±2%
of reading above 32°F (0°C);
±4°F (3°C) or ±3% of reading
below 32°F; “K” type
thermocouple: ±1° (F or C)
Adjustable from
0.1 to 1.0 in 0.01 steps
TEMPERATURE
Infrared Thermometers
6:1 POCKET INFRARED THERMOMETER– IRT105
Ideal for spot-checking the temperature of substances and surfaces from a distance.
Perfect for electrical troubleshooting and HVAC equipment maintenance.
FEATURES:
• Optimized measurement range
• Accuracy of ±3°F or 2% above 32°F
• Adjustable emissivity
• Fast response time
• Max/Min measurement and measurement
lock modes
• Selectable °F or °C unit
• Large LCD
• Separate batteries for thermometer and laser
• Small and light and easy to use
• CE approved
SPECIFICATIONS:
♦ Distance-To-Spot (D:S) Ratio: 6:1
♦ Temperature Measurement Range:
-22° to 482°F (-30° to 250°C)
♦ Measurement Accuracy: ±3°F (2°C) or 2%
of reading (whichever is greater) above
32°F (0°C); ±5°F (3°C) or 2% of reading
(whichever is greater) below 32°F
♦ Emissivity: Adjustable from 0.1 to 1
♦ Response Time: 500 msec for 95% response
♦ Laser Class/Power/Wavelength:
Class II/<1mW/630 to 660nm
♦ Thermometer Battery Life: 50 hours, typical
♦ Operating Temperature: 32° to 104°F
(0° to 40°C) @<75% relative humidity
♦ Dimensions: 4.25 x 2.05 x 0.98 in.
(108 x 52 x 25mm)
♦ Weight: 1.41 oz. (40g)
♦ Power Source: 2 “CR2032” Li-ion batteries
♦ Warranty: 1 year (limited)
IRT105
INCLUDES:
• Wrist strap
• Batteries
• User’s manual
UPC
NO.
20196 1
IRT105
THE HEAT SEEKER™ 8:1 MID-RANGE INFRARED THERMOMETER – IRT207
Ideal for most applications in HVAC/R, plumbing and heating, electrical, automotive and
other industrial jobs.
FEATURES:
• Rugged and ergonomic design
• Backlit LCD display
• Sighting laser can be turned off
• °F/°C selectable
• CE, RoHS, WEEE approved
SPECIFICATIONS:
♦ Distance to Spot (D:S) Ratio: 8:1
♦ Measurement Range:
-4° to 608°F (-20° to 320°C)
♦ Measurement Accuracy: ±4°F or 2% of reading,
whichever is greater
♦ Emissivity: Fixed at 0.95
♦ Resolution: 0.5°F / 0.5°C
♦ Operating Temperature:
32° to 122°F (0° to 50°C)@ 10 to 90% RH
♦ Storage Temperature:
14° to 140°F (-10° to 60°C)
♦ Dimensions:
6.14 x 3.95 x 1.26 in. (156 x 100 x 32mm)
♦ Weight: 6 oz. (135g)
♦ Power Source:
1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Battery
• User’s manual
UPC
NO.
01403 5
IRT207
IRT207
12:1 WIDE-RANGE INFRARED THERMOMETER – IRT657
Ideal for isolating overheated electrical components and hot spots, troubleshooting
HVAC/R and automotive systems, or performance-testing motors and boilers.
FEATURES:
• Wide measurement range of
-40° to 1076°F (-40° to 580°C)
• Accuracy of ±3°F (2°C) or ±5°F (3°C),
depending on temperature
• Large (1.6 in. diagonal) backlit LCD
SPECIFICATIONS:
♦ Distance-To-Spot (D:S) Ratio: 12:1
♦ Temperature Measurement Range:
-40° to 1076°F (-40° to 580°C)
♦ Emissivity: Fixed at 0.95
♦ Measurement Accuracy:±3°F (2°C) or ±2%
of reading above 32°F (0°C); ±5°F (3°C) or
±2% of reading below 32°F (0°C)
♦ Response Time: 500 msec for 95% response
♦ Display Size and Type: 1.6 in. (40.6mm)
diagonal LCD
♦ Operating Temperature: 32° to 104°F
(0° to 40°C) @<75% relative humidity (RH)
♦ Storage Temperature: -4° to 140°F
(-20° to 60°C) @<85% RH
♦ Dimensions:
6.9 x 3.6 x 1.5 in. (175 x 91.5 x 38mm)
♦ Weight: 5.93 oz. (168g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Carrying case • Battery • User’s manual
UPC
NO.
01480 6
IRT657
IRT657
Patent Pending
General Tools & Instruments
21
TEMPERATURE
Infrared Thermometers
12:1 INFRARED THERMOMETER WITH “K” TYPE THERMOCOUPLE &
ADJUSTABLE EMISSIVITY – IRT659K
Ideal for isolating overheated electrical components and hot spots,
troubleshooting HVAC/R and automotive systems, and performance-testing
motors and boilers.
FEATURES:
• Automatically holds measurements
• Automatically stores last 10 readings for recall
• Displays Min/Max/Avg/Dif temperatures
captured during each scanning session
• Settable high and low temperature alarms
• °C/°F and laser pointer on/off switches
SPECIFICATIONS:
♦ Distance-to-Spot (D:S) Ratio: 12:1
♦ IR Temperature Measurement Range:
-58° to 1202°F (-50° to 650°C)
♦ IR Temperature Measurement Accuracy:
IRT659K
±3°F (2°C) or ±2% of reading (whichever is
greater) above 32°F (0°C); ±4°F (3°C) or ±3%
of reading (whichever is greater) below 32°F
♦ “K” Port Measurement Range: -146° to 2498°F
(-99° to 1370°C)
♦ Included “K” Type Thermocouple
Range/Accuracy: 0° to 500°F
(-18° to 260°C)/±1° (F or C)
♦ Display Resolution: 1° (F or C)
♦ Emissivity: Adjustable from 0.1 to 1.0 in 0.01
steps, with default of 0.95
♦ Display Size & Type 1.5 in. (38mm) diagonal
backlit LCD
♦ Response Time: 500 ms
♦ Laser Power: Class II (<3mW)
♦ Operating Temperature: 32° to 104°F
(0° to 40°C) @ 10 to 75% RH, non-condensing
♦ Auto Power Off Trigger: 30 seconds of inactivity
♦ Dimensions: 5.31 x 1.65 x 6.81 in.
(135 x 42 x 173mm)
♦ Weight: 6.93 oz. (168g) (without battery)
♦ Power Source: (1) “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• “K” type thermocouple probe
• Soft carrying case
• Battery
• User’s manual
UPC
NO.
01598 8
IRT659K
8:1 ENERGY AUDIT IR THERMOMETER/SCANNER
WITH STAR BURST LASER TARGETING – IRTC50
Ideal for energy auditors, building inspectors, HVAC technicians, electricians,
manufacturing technicians, food processing inspectors and homeowners.
IRTC50
Patent Pending
FEATURES:
• Set-point band options of 1°, 5° and 10°F
(0.5°, 3°, 5.5°C)
• Red or blue light and fast or slow buzzer signal
when the target temperature is above or below
the reference temperature ± the set-point
• Fast response time of 0.5 seconds
• Unique Star Burst laser targeting system helps
approximate the target spot size
• Large backlit LCD
• Automatic temperature “hold” when the trigger
is released
• Display and backlight turn off after
15 seconds of inactivity
• Auto-power off after 60 seconds of inactivity
• CE and ROHS approved
SPECIFICATIONS:
♦ Distance to Spot Ratio: 8:1
♦ Measurement Range:
-40° to 428°F (-40° to 220°C)
♦ Measurement Accuracy: ±4°F/C or
±2% of reading above 32°F (0°C);
±3°F/C or ±3% of reading below 32°F (0°C)
♦ Resolution: 1°F (0.5°C)
♦ Emissivity: Fixed at 0.95
♦ Response Time: 0.5 seconds
♦ Operating Temperature:
32° to 104°F (0° to 40°C)
♦ Storage Temperature:
-20° to 122°F (-29° to 50°C)
♦ Operating Humidity: 10 to 90%
♦ Dimensions:
5.31 x 1.65 x 6.81 in. (135 x 42 x 173mm)
♦ Weight: 6.24 oz. (117g) without battery
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Battery
• User’s manual
22
General Tools & Instruments
UPC
NO.
01442 4
IRTC50
TEMPERATURE
Stem Thermometers
DIGITAL JUMBO DISPLAY SERVICE THERMOMETER – PT300M
Ideal for use in labs, industrial control and HVAC applications.
FEATURES:
• Wide measurement range
• Displays ambient temperature and temperature
from remote probe
• °F or °C display
• Min/Max memory + data hold
• Audible and visual alarm set points
• Stainless steel probe is immersible in water
• Clock displays hours and minutes
• Sensor wire compartment
• CE approved
Measurement Accuracy: ±1.8°F (±1°C)
Response Time: 1 second
Probe Length: 5.125 in.
Operating Temperature:
14° to 122°F (-10° to 50°C)
♦ Dimensions:
6 x 1.8 x 0.7 in. (152 x 46 x 18mm)
♦ Weight: 4 oz. (114g)
♦ Power Source: 1 “AAA” battery (included)
♦
♦
♦
♦
INCLUDES:
• Wrist strap
SPECIFICATIONS:
♦ Measurement Range:
-58° to 572°F (-50° to 300°C)
UPC
NO.
21060 4
PT300M
PT300M
DIGITAL THERMOMETER – DPT301FC
Ideal for automotive, heating and refrigeration.
FEATURES:
• Instant read
• °F/°C selectable
• Food safe
• 4.5 in. stainless steel stem
• Flat edge, non-roll case
SPECIFICATIONS:
♦ Measurement Range: -40° to 302°F
(-40° to 150°C)
♦ Measurement Accuracy: ±1.8°F (±1°C)
♦ Probe Length: 4.5 in. (114mm)
♦ Dimensions: 11.00 x 5.25 x 1.25 in.
(279 x 133 x 32mm)
♦ Weight: 2.55 oz. (72.29g)
♦ Power Source: 1 “LR44” battery (included)
UPC
NO.
20035 3
DPT301FC
DPT301FC
DELUXE DIGITAL STEM THERMOMETER – HDT304K
Ideal for automotive, heating and refrigeration.
FEATURES:
• °F/°C switch
• Data hold
• Stainless steel piercing probe
• Pocket clip
• Drop resistant
SPECIFICATIONS:
♦ Measurement Range:
-58° to 302°F (-50° to 150°C)
♦ Measurement Accuracy: ±1.8°F (±1°C) from
-22° to 302°F (-30° to 150°C); ±4°F (±2°C)
elsewhere
♦ Response Time: 0.5 seconds
♦ Probe length: 3.8 in. (97mm)
♦ Auto Power Off:
After 1 hour of inactivity
♦ Operating Temperature:
14° to 122°F (-10° to 50°C)
♦ Dimensions: 11.00 x 5.25 x 1.00 in.
(279 x 133 x 26mm)
♦ Weight: 1.60 oz. (45.36g)
♦ Power Source: 1 “LR44” battery (included)
UPC
NO.
20005 6
HDT304K
HDT304K
ANALOG POCKET THERMOMETERS WITH MAGNIFYING LENS – 320, 321
Ideal for quick temperature readings.
FEATURES/SPECIFICATIONS:
• Rugged 5 in. (127mm) long, 0.14 in. (3.5mm)
diameter stainless steel probe
• 1 in. (25.4mm) diameter dial with
magnifying lens
• Measurement Range: -40° to 160°F
(-40° to 71°C) for 320; 0° to 220°F
(-18° to 104°C) for 321
• Measurement Accuracy: ±5%
INCLUDES:
• Protective sheath with pocket clip
UPC
NO.
00320 1
22391 3
320
321
320
321
General Tools & Instruments
23
TEMPERATURE
Thermometers
DIGITAL THERMOCOUPLE THERMOMETER – DT8852
Ideal for measuring temperature differentials T1-T2.
FEATURES:
• Dual input
• Includes two “K” type thermocouples; also
compatible with “T” type
• °F/°C switch
• Backlit LCD display
• Data hold + auto power off
• Low battery indicator
• RS-232 output for uploading data logs
• CE and RoHS approved
DT8852
SPECIFICATIONS:
♦ Measurement Range with “K” type
Thermocouple: -328° to 2498°F
(-200° to 1370°C)
♦ Measurement Accuracy: 0.1% (±1°F)
♦ Response Time: 1 sec.
♦ Dimensions:
7.16 x 2.83 x 1.18 in. (182 x 72 x 30mm)
♦ Weight: 7.8 oz. (220g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• 2 “K” type probes (TPK500)
• Molded hard case
• Battery
UPC
NO.
21012 3
DT8852
JUMBO DISPLAY IN/OUTDOOR THERMOMETER – DT898P
Ideal for measuring and monitoring both indoor and outdoor temperature.
FEATURES:
• Jumbo triple LCD display
• Min/Max memory
• Outdoor probe is water-resistant
• 12 ft. cable with probe
• Wall mount or stand for desktop display
• 12/24 hour clock
SPECIFICATIONS:
♦ Measurement Range (Outdoor):
-58° to 158°F (-50° to 70°C)
♦ Measurement Range (Indoor):
32° to 122°F (0° to 50°C)
♦ LCD Size: 2.4 x 1.6 in. (60 x 40mm)
♦ Dimensions:
4.2 x 2.6 x 0.9 in. (106 x 75 x 22mm)
♦ Weight: 4.8 oz. (135g)
♦ Power Source: 1 “AAA” battery (included)
♦ Warranty: 1 year (limited)
DT898P
INCLUDES:
• Mounting accessories
• Battery
UPC
NO.
10012 7
DT898P
HORIZONTAL REFRIGERATOR AND FREEZER THERMOMETER – FT80H
Ideal for hanging.
FT80H
FEATURES:
• Stainless steel
• Horizontal reading
• Hanging or free standing
• Easy to read display
• °F/°C scales
SPECIFICATIONS:
♦ Measurement Range:
-40º to 80ºF (-40º to 27ºC)
♦ Dimensions:
1.25 x 4.75 x 0.75 in. (32 x 121 x 19mm)
UPC
NO.
24015 1
FT80H
REFRIGERATOR/FREEZER THERMOMETER – FT80R
Ideal for hanging.
FEATURES:
• Stainless steel
• Hanging or free standing
• Easy-to-read round dial
• °F/°C scales
• Color-coded temperature arcs
FT80R
24
General Tools & Instruments
SPECIFICATIONS:
♦ Measurement Range:
-20° to 80°F (-29° to 27°C)
♦ Dial Diameter: 2 in. (50.80mm)
UPC
NO.
24005 2
FT80R
TEMPERATURE
Remote Sensing Thermometers
3 CHANNEL CAPABLE WIRELESS THERMOMETER WITH REMOTE – EMR813
Ideal for measuring and monitoring indoor and outdoor temperature.
FEATURES:
• Min/Max memory
• Programmable temperature alert
• °F/°C switch
• CE approved
SPECIFICATIONS:
♦ Measurement Range:
Indoor: 32° to 122°F (0° to 50°C)
Outdoor: -4° to 140°F (-20° to 60°C)
♦ Dimensions of Base:
3.8 x 2.4 x 0.2 in. (97 x 60 x 30mm)
♦ Weight of Base: 3 oz. (85g)
♦ Dimensions of Sensor:
3.6 x 2.6 x 0.9 in. (90 x 65 x 23mm)
♦ Weight of Sensor: 3 oz. (85g)
♦ Power Source: 2 “AAA” batteries (not included)
♦ Warranty: 1 year (limited)
INCLUDES:
• 1 remote sensor
UPC
NO.
60017 7
EMR813
EMR813
IN/OUT THERMOMETER WITH WATERPROOF PROBE – AQ150
Ideal for monitoring indoor/outdoor temperature.
FEATURES:
• Displays ambient or remote (IN or OUT)
temperature
• Tracks MAX and MIN temperatures
• High and low remote temperature alarms
• ºC/ºF button
• Backlit LCD
• Foldaway stand
• Includes battery and mounting hardware
• Magnets on back
• Detachable sensor-tipped cable
SPECIFICATIONS:
♦ Ambient Temperature Range:
14° to 122°F (-10° to 50°C)
♦ Remote Temperature Range:
-58° to 158°F (-50° to 70°C)
♦ Measurement Accuracy: ±1°F (0.5°C) from
-4° to 122°F (-20° to 50°C); ±1.8°F (±1°C)
elsewhere in range
Display Resolution: 0.1° (C or F)
Sampling Period: 10 seconds
Probe Cord Length: 10 ft. (3m)
Display Size: 1.88 x 0.82 in. (48 x 21mm)
Digit Height: 5/8 in. (16mm)
Dimensions:
2.9 x 2.1 x 0.7 in. (73 x 52 x 18mm)
♦ Weight of unit, probe, battery and accessories:
3.76 oz. (106g)
♦ Power source: 1 “CR2032” battery (included)
♦ Warranty: 1 year (limited)
♦
♦
♦
♦
♦
♦
INCLUDES:
• Suction cup
• Velcro mounting tape
• Battery
• Mounting hardware
UPC
NO.
22150 1
AQ150
AQ150
WIRELESS THERMO-HYGROMETER WITH REMOTE SENSOR – EMR963HG
Ideal for general-purpose environmental monitoring of facilities.
FEATURES:
• Monitors temperature and humidity from
up to 90 feet away
• °F/°C switch
• Up to three wireless sensors may be used with
base station
• Includes one remote wireless sensor; additional
sensors available
• Jumbo display
• Min/Max memory
• Trend information
• Comfort indicator
• CE and RoHS approved
SPECIFICATIONS:
♦ Indoor and Outdoor Temperature Range:
-58° to 158°F (-50° to 70°C)
♦ Indoor and Outdoor Humidity Range:
25% to 90%
♦ Temperature Resolution: 0.2°F (0.1°C)
♦ Humidity Resolution: 1%
♦ Humidity Accuracy: ±5%
♦ Transmitting Range: up to 90 ft.
♦ Transmission Interval:
approximately every 30 seconds
♦ Transmission Frequency: 433 MHz
♦ Dimensions: Base: 4.5 x 4 x 0.75 in.
(114 x 102 x 19mm)
Sensor: 4 x 2.75 x 0.75 in. (102 x 70 x 19mm)
♦ Weight: (w/o batteries):
Base Station: 5.5 oz. (156g);
Sensor: 2.2 oz. (62g)
♦ Power Source:
Base Station: 2 “AA” batteries (included)
Sensor: 2 “AA” batteries (included)
♦ Warranty: 1 year (limited)
EMR963HG
SENSOR THGR268
RoHS
INCLUDES:
• 4 batteries
• 1 Wireless temperature-humidity sensor Model
THGR268
UPC
NO.
60070 2
60073 3
EMR963HG
THGR268 (optional)
Wireless temperature-humidity sensor
General Tools & Instruments
25
MOISTURE
Moisture, Temperature & Humidity
PIN/PINLESS MOISTURE METER W/ TEMPERATURE & HUMIDITY – MMH800
Ideal for locating water leaks and measuring moisture content of drywall, plastered
walls, floors and subfloors. Also measures ambient temperature and humidity.
FEATURES:
• Pin-type and non-marring inductive sensors
• Two dedicated displays: Moisture percentage,
and ambient temperature plus relative humidity
• High/medium/low audible indication of moisture
level
• Holds moisture level readings
• Auto diagnostic check
• Auto power off
SPECIFICATIONS:
♦ Measurement Ranges: 5 to 50% moisture
(wood); 1.5 to 33% moisture (building materials)
♦ Moisture Measurement Accuracy: ±3%
♦ Moisture Measurement Resolution: 0.1%
MMH800
♦ Temperature Measurement Range/Accuracy:
32° to 140°F (0° to 60°C)/±2°F (±2°C)
♦ Humidity Measurement Range/Accuracy:
25 to 95%/±3% from 0° to 40°C
♦ Auto Power Off: After 3 minutes of inactivity
♦ Dimensions: 7.13 x 2.17 x 1.57 in.
(181 x 55 x 40mm)
♦ Weight: 4.06 oz. (115g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Battery • Two sets of extra pins
• User’s manual
UPC
NO.
01486 8
MMH800
HUMIDITY SEEKER TEMPERATURE & HUMIDITY PEN – PTH8707
Ideal for contractors and homeowners to measure temperature and humidity.
FEATURES:
• °F/°C switch
• Check home comfort and ventilation
• Monitor greenhouse environment
• Sensor protection cap
• Clips into your shirt pocket
PTH8707
SPECIFICATIONS:
♦ Temperature Measurement Range:
32° to 122°F (0° to 50°C)
♦ Temperature Measurement Accuracy:
±1.8°F (±1°C)
♦ Relative Humidity Measurement Range:
20 to 95%
♦ RH Measurement Accuracy: ±3% of reading
♦ Temperature, RH Resolutions:
0.1° (F or C), 0.1% RH
♦ Dimensions: 6.5 x 1.25 x 0.5 in.
(165 x 32 x 13mm)
♦ Weight: 1.9 oz. (54g)
♦ Power Source: 1 “CR2032” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Battery • Pocket clip • User’s manual
UPC
NO.
01402 8
PTH8707
TEMPERATURE-HUMIDITY DATA LOGGER – DL8835
Ideal for measuring, monitoring and recording temperature and humidity of sensitive
facilities and on water-damage restoration projects.
DL8835
FEATURES:
• Records relative humidity and temperature with
date/time stamp
• Logs data for days, weeks or months
• Multiple data loggers can be programmed and
data downloaded from a single docking station
• Sampling rate programmable from 1 second to
2 hours
• View either temperature or humidity on LCD
• Data logging functions require optional Serial
(RS-232) or USB Interface Kit INT8819
(see below)
• Programmable high and low limits with alarm
SPECIFICATIONS:
♦ Temperature Measurement Range:
-40° to 185°F (-40° to 85°C)
INT8819
♦ Temperature Measurement Accuracy:
±1°F between -4° and 122°F; ±2°F elsewhere
♦ Relative Humidity Measurement Range:
5 to 95%
♦ RH Measurement Accuracy: ±5% of reading
♦ Temperature, RH Resolutions: 0.1°, 0.1% RH
♦ Data Logging Capacity: Up to 8,000 data points
each for temperature, humidity
♦ Dimensions:
3.14 x 2.16 x 0.86 in. (80 x 55 x 22mm)
♦ Weight: 2.6 oz. (76g)
♦ Power Source: Lithium battery (included)
♦ Warranty: 1 year (limited)
UPC
NO.
46125 9
46135 8
DL8835
INT8819 USB Interface Kit (optional)
USB INTERFACE KIT FOR DL8835 – INT8819
FEATURES:
• For downloading readings to your PC
• Use with data logger model DL8835
26
General Tools & Instruments
INCLUDES:
• Data logger base • USB1.1 cable
• Software
• User’s manual
♦ Warranty: 1 year (limited)
UPC
NO.
46135 8
INT8819
HUMIDITY & TEMPERATURE
Psychrometers
CALIBRATABLE MULTI-FUNCTION PSYCHROMETERS –
EP8703, EP8709, EP8710
Ideal for accurately measuring any environment’s temperature, relative humidity (RH),
dew point and other condensation parameters.
FEATURES:
• Jumbo backlit display with double (EP8703,
EP8709) or triple (EP8710) readout
• Field calibratable using optional 33% and
75% salts
• Data hold and Max/Min buttons (EP8709 and
EP8710 only)
• Also calculates and displays wet bulb
temperature (EP8709 and EP8710 only)
• Using included external probe (EP8710 only),
can also measure: 1) the difference between an
object’s internal and surface temperatures or
2) an object’s condensation temperature—the
difference between its surface temperature
and the dew point temperature
• °F/°C switch
• 20-minute Auto Power Off
• Low battery indicator
SPECIFICATIONS:
♦ Ambient Temperature Measurement Range:
14° to 122°F (-10° to 50°C)
♦ Ambient Temperature Measurement
Accuracy/Resolution: ±1.8°F (±1.0°C)
♦ External Temperature Probe Measurement
Range (EP8710 only): 14° to 158°F
(-10° to 70°C)
♦ External Temperature Probe Measurement
Accuracy (EP8710 only): ±1.8°F (±1°C)
♦ External Probe Cord Length: 48 in. (1.22m)
♦ Temperature Measurement Resolution:
0.1° (F or C)
♦ Relative Humidity (RH) Measurement Range:
0 to 99.9%
♦ RH Measurement Accuracy: ±3% from
5% to 95% RH
♦ RH Measurement Resolution: 0.1%
♦ RH Response Time: <80 seconds
♦ Current Consumption: <15mA
♦ Battery Life: 60 hours (typical)
♦ Dimensions: 7.56 x 2.40 x 1.57 in.
EP8703
EP8709
(192 x 61 x 40mm)
♦ Weight (without battery): 3.77 oz. (107g)
♦ Power Source: (1) “9V” battery (included)
♦ Warranty: 1 year (limited)
EP8710
INCLUDES:
• Sensor protection cap
• “9V” battery
• User’s manual
• External Temperature Probe (EP8710 only)
UPC
NO.
01632 9
01630 5
01631 2
15060 3
15070 2
EP8703
EP8709
EP8710
HR33 Calibration Salt MgCl 33% (optional)
HR75 Calibration Salt NaCl 75% (optional)
CALIBRATABLE DIGITAL PSYCHROMETER - EP8706
Ideal for accurate handheld measurements of temperature and humidity.
FEATURES:
• Jumbo display, triple read-out
• Rotating head to protect sensor
• Field calibratable
• Auto power off
• Min/Max memory
• CE approved
♦ Relative Humidity Measurement Range:
♦
♦
♦
♦
SPECIFICATIONS:
♦ Temperature Measurement Range:
-4° to 122°F (-20° to 50°C)
♦ Temperature Measurement Accuracy:
±1.2°F (±0.6°C)
10 to 90%
RH Measurement Accuracy: ±3% of reading
Response Time: 60 seconds
Power Source: 2 “AAA” batteries (included)
Warranty: 1 year (limited)
UPC
NO.
10041 7
10043 1
15060 3
15070 2
EP8706
P8706 External Replacement Probe
HR33LJ Calibration Salt MgCl 33% (optional)
HR75LJ Calibration Salt NaCl 75% (optional)
EP8706
DIGITAL PSYCHROMETER WITH DEW POINT AND WET BULB – SAM990DW
Ideal for monitoring environmental conditions.
FEATURES:
• Displays wet bulb, dew point, humidity and
temperature
• No twirling or charts necessary
• Large digital display
• Dew point measurement
• Wet and dry bulb temperature
• Min/Max memory
• °F or °C readings
• Data hold
• Auto power off
• Low battery indication
SPECIFICATIONS:
♦ Temperature Measurement Range:
-4° to 122°F (-20° to 50°C)
♦ Temperature Measurement Accuracy:
±1.8°F (±1°C)
♦ Relative Humidity Measurement Range: 10 to 90%
♦ RH Measurement Accuracy: ±3% of reading
♦ Dew Point Measurement Accuracy:
±1.2°F (±0.6°C)
♦ Response Time: 60 seconds (approx.)
♦ Dimensions: 6.7 x 1.85 x 0.5 in.
(170 x 22 x 13mm)
♦ Weight: 4 oz. (113g)
♦ Power Source: 2 “AAA” batteries (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Protective cap with pocket clip
UPC
NO.
10025 7
SAM990DW
SAM990DW
General Tools & Instruments
27
TEMPERATURE & HUMIDITY
Monitors
HUMIDITY-TEMPERATURE INSTRUMENT
WITH EXCEL-FORMATTED DATA LOGGING SD CARD – DTH3007SD
Ideal for high accuracy measurements of temperature and relative humidity of a fluid,
including dew point/wet-bulb temperature of ambient air.
DTH3007SD
Patented
FEATURES:
• Four-function instrument measures
temperature/humidity, dew point, wet-bulb
temperature and surface temperature
• Big (2.5 in. diagonal) front-panel green
backlit LCD is easy to read
• Displays maximum and minimum readings holds
• Sampling time settable from one secs. to one hr.
• Also supports manual data logging and
changing of SD card storage location
• Auto power off function
Included Accessories:
SPECIFICATIONS:
• Soft carrying case • Temperature-humidity probe ♦ Display: 2.05 x 1.5 in. (52 x 38mm) LCD
• 2 GB SD memory card • User’s manual
♦ Measurement Range:
• Temperature: 32° to 122°F (0° to 50°C)
Optional Accessories:
• R.H.: 5 to 95%
UPC
NO.
DESCRIPTION
01506 3
25015 0
25005 1
25003 7
01502 5
AC1
TPK500
TPK05
TPK03
SDRD1
9VDC adapter for 110V power supply
-50° to 500°F “K” type thermocouple
-40° to 562°F “K” type thermocouple
-40° to 950°F “K” type thermocouple
SD Card Reader
• Dew Point: -13.5° to 120.1°F (-25.3° to 48.9°C)
• Wet-bulb: -6.9° to 122°F (-21.6° to 50°C)
♦ Measurement Accuracy:
• ± 1.5°F (± 0.8°C) for temperature
• Sum of temperature and humidity accuracies
for dew point and wet-bulb temperature
♦ Operating Temperature: 32° to 122°F (0° to 50°C)
♦ Operating Relative Humidity: 0 to 85%
♦ Dimensions: 6.97 x 2.68 x 1.77 in. (177 x 68 x 45mm)
♦ Weight: 1.08 lb. (489g)
♦ Power Source: 6 “AA” batteries (not included) or
optional 9-VDC AC adapter
♦ Warranty: 1 year (limited)
UPC
NO.
01461 5
DTH3007SD
DATA LOGGING TEMPERATURE-HUMIDITY MONITOR – LTH8809DL
Ideal for monitoring and recording environmental in HVAC/R applications.
FEATURES:
• Bright red jumbo LED display
• Wall or desk mountable
• Settable high and low temperature and humidity
alarms
• Also calculates and displays dew point
• Selectable temperature unit
• Data logging capacity of 16,000 records
• USB interface
SPECIFICATIONS:
♦ Temperature Range: -4° to 158°F (-20° to 70°C)
♦ Temperature Accuracy: ±1.2°F (±0.6°C)
♦ Relative Humidity Measurement Range: 5 to 95%
LTH8809DL
♦ RH Measurement Accuracy: ±3% of reading
between 10 and 90% RH; ±5% elsewhere
♦ Temperature, Humidity Resolutions:
0.1°F (0.1°C), 0.1% RH
♦ Display Size: 2 x 2.6 in. (50.9 x 65.5mm)
♦ Dimensions: 4.8 x 5.2 x 1.6 in. (120 x 130 x 42mm)
♦ Weight: 7.4 oz. (210g)
♦ Power Source: 4 “AAA” batteries (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Batteries
• Data logging/interface software
• USB cable • User’s manual
UPC
NO.
01309 0
LTH8809DL
HIGH ACCURACY TEMPERATURE/HUMIDITY
AND IAQ MONITOR WITH OUTPUT RELAY – CDM77232
Ideal for monitoring indoor air quality of houses, offices, classrooms, factories, hospitals
and hotels. Includes relay for activating a ventilation system.
CDM77232
INCLUDES:
• AC Adapter • User’s Manual
UPC
NO.
01311 3
CDM77232
28
General Tools & Instruments
FEATURES:
• Measures CO2 level, air temperature, humidity,
dew point and wet bulb temperature
• Triple backlit LCD displays of CO2 level,
temperature and humidity
• Uses stable non-dispersive infrared (NDIR)
sensor to measure CO2
• Calculates, periodically updates and displays 8-hr.
time-weighted average (TWA) of CO2 exposure
and 15-minute short-term exposure limit (STEL)
• Visual and audible CO2 alarms
• Min/Max memory +data hold
• Powered by 12V AC/DC adapter
• Manual or automatic calibration of CO2
• RS-232 interface for uploading readings to a PC
• Wall or desktop mount
• CE and RoHS approved
SPECIFICATIONS:
♦ CO2 Measurement Range: 0 to 5000ppm
♦ CO2 Measurement Accuracy:
±50ppm ±5% of reading
♦ Pressure Dependence of CO2 Measurement:
+1.6% of reading per kPa deviation from
sea-level atmospheric pressure (100kPa)
♦ CO2 Calibration Level: 400ppm
♦ Temperature Range: 14º to 140°F (-10º to 60°C)
♦ Temperature Accuracy: ±0.9°F (0.6°C)
♦ Humidity Measurement Range: 10 to 95%
♦ Humidity Measurement Accuracy: ±3%
♦ Warmup Time: 30 seconds
♦ Response Times: 30 seconds for CO2 and
temperature, 30 minutes for humidity
♦ Auto Power Off: 20 minutes of inactivity
♦ Operating Temperature: 32° to 122°F
(0° to 50°C)@<80% RH
♦ Storage Temperature: -4° to 140°F
(-20° to 60°C)@<80% RH
♦ Dimensions: 6.88 x 5.63 x 2.38 in.
(174.75 x 143 x 60.45mm)
♦ Weight: 14.00 oz. (397g)
♦ Power Source: AC Adapter (included)
♦ Warranty: 1 year (limited)
TEMPERATURE & HUMIDITY
Monitors & Data Loggers
USB TEMPERATURE-HUMIDITY DATA LOGGERS – HT10, HT20, HT50
Ideal for monitoring temperature and humidity in enclosed spaces.
FEATURES:
• One button starts/stops data logging without a PC
• Plug-and-play USB 2.0 interface; no need for
cables, cradles or docks
• Large storage capacity: Up to 16,000 pairs of
humidity and temperature readings
• 3-1/2-digit LCD displays real-time temperature
and RH readings, device working status and
“memory full” (HT20 and HT50 only)
• Built-in IR thermometer for checking
temperature of vents and surfaces (HT50 only)
• Included software is used to set sampling time
& Hi/Lo temp and RH alarm setpoints
• Software also calculates dew point, calculates
and plots absolute humidity in units of GPP or
No. HT10
g/kg, and displays data logs as time-based
graphs synchronized to your PC’s clock
• One-click exporting of logs to Excel or Word
• Long battery life (up to one year)
UPC
01501 8
01503 2
01504 9
72015 8
NO.
HT10
HT20
HT50
BA10 1/2 “AA” Battery (optional)
No. HT20
No. HT50
Specifications:
HT10
HT20
HT50
USB RH/Temp
Data Logger w/ LED & GPP
-4° to 158°F (-20° to 70°C)
±0.5°F (0.3°C)
±0.2°F
(0.1°C)
0 to 100% ±2% from
10 to 90% RH; ±3% elsewhere
USB RH/Temp
Data Logger w/ LCD & GPP
-4° to 158°F (-20° to 70°C)
±0.5°F (0.3°C)
±0.2°F
(0.1°C)
0 to 100% ±2% from
10 to 90%RH; ±3% elsewhere
USB RH/Temp/GPP
Data Logger w/ LCD & IRT
-4° to 158°F (-20° to 70°C)
±0.5°F (0.3°C)
±0.2°F
(0.1°C)
0 to 100% ±2% from
10 to 90%RH; ±3% elsewhere
±0.1%
±0.1%
Model#
Name
Temperature Measurement
Range/Accuracy
Temperature Measurement
Resolution and Repeatability
Relative Humidity (RH)
Measurement Range/Accuracy
RH Measurement Resolution
and Repeatability
GPP Measurement Range
Internal Storage Capacity
IRT Measurement Range
IRT Measurement Accuracy
IRT Measurement Resolution
IRT Distance-to-Spot Ratio
Emissivity
IRT Response Time
Dimensions
Weight
Power Source
What’s Included
Battery Life (typical)
Warranty
±0.1%
0-1500 GPP (0-285g/kg )
16,000 pairs of RH & temp readings 16,000 pairs of RH & temp readings 16,000 pairs of RH & temp readings
(10,000 sets with IR readings)
-4° to 482°F
N/A
N/A
(-20° to 250°C)
±5°F (3°C) below 32°F (0°C)
N/A
N/A
±4°F (2°C) above 32°F
±0.2°F (0.1°C)
N/A
N/A
2:1
N/A
N/A
_
_
0.95 (fixed)
_
_
0.5 seconds
4.92 x 1.69 x 0.91 in.
4.96 x 1.10 x 2.01 in.
4.96 x 1.10 x 2.01 in.
(125 x 43 x 23mm)
(126 x 28 x 51mm)
(126 x 28 x 51mm)
<7 oz. (<200g)
<7 oz. (<200g)
<7 oz. (<200g)
3.6V Non-rechargeable
3.6V Non-rechargeable
3.6V Non-rechargeable
Lithium-Ion Battery
Lithium-Ion Battery
Lithium-Ion Battery
(Type SB-AA02)
(Type SB-AA02)
(Type SB-AA02)
Battery, Software,
Battery, Software,
Battery, Software,
USB Extension Cable, User’s Manual USB Extension Cable, User’s Manual USB Extension Cable, User’s Manual
1 year
1 year
1 year
1 year
1 year
1 year
0-1500 GPP (0-285g/kg)
0-1500 GPP (0-285g/kg )
INCLUDES:
• Curve Viewer software & drivers on mini-disc • USB extension cable • Battery • User’s Manual
JUMBO DISPLAY HUMIDITY AND TEMPERATURE MONITOR – DTH03A
Ideal for measuring, monitoring and displaying temperature and humidity.
FEATURES:
• Displays humidity and temperature
• Min/Max temperature and humidity memory
• °F/°C slide switch
SPECIFICATIONS:
♦ Temperature Measurement Range:
32° to 122°F (0° to 50°C)
♦ Relative Humidity Measurement Range:
20 to 95%
♦ Temperature, RH Resolutions:
0.1° (F or C), 1% RH
♦ Display Size: 3.2 x 2.3 in. (80 x 58mm) with
0.9 in. (23mm) high digits
♦ Dimensions:
4.3 x 3.9 x 0.8 in. (110 x 98 x 20mm)
♦ Weight: 6.3 oz. (175g)
♦ Power Source: 1 “AAA” battery (included)
♦ Warranty: 1 year (limited)
UPC
NO.
11040 9
DTH03A
DTH03A
General Tools & Instruments
29
SAFETY
Combustible Gas Detectors
MSHA Approved
INTRINSICALLY SAFE COMBUSTIBLE GAS LEAK DETECTOR – CGD900
Ideal for detecting more combustible gases (including hydrocarbons) than
competitive units.
FEATURES:
• Detects Methane, Propane, Ethane, Butane,
Hydrogen, Ethylene, Ethanol, ISO-Butane, NOL,
Gasoline, Acetylene, Methyl Ether, Ammonia,
Hydrogen Sulfide, Industrial solvents, Benzene,
Alcohols, Acetone, Toluene, Xylene
• MSHA approved
• Intrinsically safe (in methane-air only)
• Numeric LED display of sensitivity
• Heated sensor technology
• Ultra sensitive to methane gas
• Long life sensor
• Unique digital leak size alarm
• Automatic calibration
• Alarm mute mode
• 3 LED sensitivity levels
CGD900
SPECIFICATIONS:
♦ Sensitivity: As low as 5ppm (methane)
♦ Sensor Life: 300+ hours
♦ Response Time: Instantaneous
♦ Warm-up Time: <10 seconds
♦ Calibration: Automatic
♦ Probe Length: 17 in. (432mm)
♦ Display: Bright LED-visible in sunlight
♦ Dimensions: 13.75 x 10.00 x 3.25 in.
(349 x 254 x 83mm)
♦ Weight: 2.0 lbs. (907g)
♦ Power Source: 4 “AA” batteries (included)
♦ Battery Life: 20 hours continuous use
♦ Warranty: 2 year (limited)
INCLUDES:
• Test vial • Batteries
UPC
NO.
01449 3
CGD900
COMBUSTIBLE GAS LEAK DETECTOR – NGD8800
Ideal for industrial uses, HVAC/R, plumbing and plant maintenance.
NGD8800
FEATURES:
• Detects Methane, Hydrogen, Iso-Butane,
Ethanol, Ethylene, Tetracholoroethylene,
Dimethyl Sufide, Toluene, Formaldehyde,
Diethyl-Ether, Ethyl-Acetate, Dichloromethane,
Ammonia, R-22
• Uses DSP (Digital Signal Processing)
• Multi-color circular bar graph
• Semiconductor gas sensor
• Leak size indication (audible/visible)
• Fast warm-up
• Adjustable Hi/Lo sensitivity
• Low battery indication
• Sensing tip protector
• 15.5 in. (395mm) flexible gooseneck probe
SPECIFICATIONS:
♦ Sensitivity: Variable; as low as 5ppm (gasoline)
♦ Warm-Up Time:
<110 seconds (at 25°C, 60%RH)
♦ Operating Temperature:
32° to 104°F (0° to 40°C)
♦ Dimensions: 6.8 x 2.6 x 2.2 in.
(173 x 66 x 56mm)
♦ Weight: 14.5 oz. (410g)
♦ Power Source: 4 “AA” batteries (included)
♦ Battery Life: up to 20 hours (approx.)
♦ Warranty: 1 year (limited)
INCLUDES:
• Leak check bottle • Operating Instructions
• Hard carrying case • Batteries
UPC
NO.
40880 3
NGD8800
COMBUSTIBLE GAS DETECTOR WITH WIDE OPERATING RANGE
FOR EXTREME WEATHER CONDITIONS – NGD268
Ideal for detecting all combustible gases.
NGD268
30
General Tools & Instruments
FEATURES:
• Detects Methane, Natural Gases, Coal Gases,
Hexane, Propane, Ethane, Butane, Pentane,
Isopropyl Alcohol, Halogenated Hydrocarbons
(Methanol, Ethanol, Butanol), Ether, Ketones
(Butone, Protone), Hydrogen, Toluene, Gasoline,
Industrial Solvents, Lacquers, Refrigerants,
Sulfur Dioxide, Ammonia, Sulfured Hydrogen,
Acetic Acid
• Quick response to combustible gas leaks
• Long and flexible gooseneck probe
• Adjustable sensitivity
• 30 level light/Tricolor LED indication
• Low battery alarm indication
• Sensor self-fault detection
• High concentration protection
SPECIFICATIONS:
♦ Sensitivity: < 50ppm
♦ Operating Temperature:
-40° to 158°F (-40° to 70°C) @< 98% RH
♦ Warmup Time: 20 sec.
♦ Response Time: <10 seconds
♦ Alarm Levels: Low level - Green - 20% LEL
(Lower Explosive Limit)
Med level - Yellow
High level - Red - 50% LEL
♦ Charge time: 4 to 6 hours
♦ Dimensions:
6.7 x 2.4 x 1 in. (170 x 62 x 26mm)
♦ Weight: 12.4 oz. (350g)
♦ Power Source: 1 “4.8V” rechargeable battery
(included)
♦ Battery life: up to 8 hours (approx.)
♦ Warranty: 1 year (limited)
INCLUDES:
• AC Power Adaptor
• Battery
UPC
NO.
41537 5
NGD268
SAFETY
Gas, CO & Refrigerant Leak Detectors
COMBUSTIBLE GAS DETECTOR PEN – PNG2000A
Ideal for detecting leaks of natural gas, propane or butane from plumbing and
appliances.
FEATURES:
• Sensitive, reliable and easy to operate
• Fast response time
• Redundant visual and audible alarms
• Auto-calibrating
• Malfunction and low battery alerts
SPECIFICATIONS:
♦ Range: 0 to 100%LEL
♦ Response Time: < 5 seconds
♦ Sampling: Natural diffusion
♦ Operating Temperature:
-4° to 131°F (-20° to 55°C)
♦ Operating Humidity: <95%RH
♦ Operating Voltage: DC3V
♦ Operating Current: <150mA
♦ Low Alarm: (20±5) % LEL
♦ High Alarm: (50±10) % LEL
♦ Dimensions: 7.6 (L) x 1.2 (Dia) in. (193 x 30mm)
♦ Weight: 4 oz. (113g)
♦ Power Source: 2 “AA” batteries (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Wrist strap • Batteries • User’s manual
UPC
NO.
41501 6
PNG2000A
PNG2000A
DIGITAL CO DETECTOR WITH AUTO ZERO – DCO1001
Ideal for HVAC home, office, tunnels, mines, etc.
FEATURES:
• Adjustable CO warning level
• LCD dual digital display
• Bright backlight
• Low battery indication
• Also measures and displays
ambient temperature
• °F/°C switch
• Auto power off
• Auto-calibrating for 0ppm,
100ppm, 500ppm
• Max hold
• CE and RoHS approved
SPECIFICATIONS:
♦ Measurement Range: 0 to 999ppm
♦ Resolution: 1ppm
♦ Accuracy: ±20% from 0 to 100ppm;
±15% from 100 to 500 ppm
♦ Dimensions:
7 x 1.7 x 1.1 in. (178 x 43 x 28mm)
♦ Weight: 4 oz. (113g)
♦ Power Source: 3 “AAA” batteries (included)
♦ Battery Life: 250 hours with the backlight off;
and 35 hours with the backlight on
♦ Warranty: 1 year (limited)
INCLUDES:
• Wrist strap • Carrying pouch
• Batteries • User’s manual
UPC
NO.
41655 6
DCO1001
DCO1001
DIGITAL REFRIGERANT LEAK DETECTOR WITH PUMP – RLD400
Ideal for electronic sensing—the most widely used, sensitive and accurate method
of refrigerant leak detection. New proprietary semiconductor sensor detects many new
ozone layer-friendly refrigerants approved under the U.S. EPA's Significant New
Alternatives Policy (SNAP).
FEATURES:
• Proprietary sensor with lifetime of more than
300 hours of operation (ten years of normal use)
• Detects all commercially available HFC, HFO,
HC, HCFC and CFC refrigerants as well as
blends and newly approved replacements such
as R-22 and R-1234yf
• Triple-redundant leak indication (loud fast beep,
bright flashing LED, digital leak size reading)
• True mechanical pump draws in samples,
increasing sensitivity
• Three sensitivity levels
• Fast warmup
• Comfortable neoprene grip
• Automatic calibration and reset to ambient
levels
• Mutable beeper
• Garage-durable construction
• Made in U.S.A.
• SAE J2791 and J2913 certified
• Complies with European standard EN 14624
• CE, RoHS, WEEE approved
SPECIFICATIONS:
♦ Sensitivities: 0.05 oz./yr (1.4 g/yr) for R-134a;
0.025 oz./yr (0.7g/yr) for R-22
♦ Refrigerants Detected: R-134a, R-410a, R-404a,
R-407c, R-507, CFC-12 (R-12 or Freon), R-22,
R-1234yf
♦ Detection Modalities: Sound, light, leak size
measure
♦ Sensor Type: Proprietary solid electrolyte
semiconductor
♦ Sensor Life: >300 hours (ten years’ normal use)
♦ Warmup Time: 17–20 seconds
♦ Response Time: Instantaneous
♦ Display Type, Size: 7-segment red LED, 0.6 in.
(15mm) high
♦ Dimensions of Instrument: 6.8 x 2.6 x 2.2 in.
(173 x 66 x 56mm) w/17 in. (432mm) probe
♦ Weight of Instrument: 1.5 lb. (680g)
♦ Power Source: 4 “AA” batteries (included)
♦ Battery Life: 5 hours continuous operation
(typical)
♦ Warranty: 2 years (limited) (including sensor)
RLD400
INCLUDES:
• Padded hard case
• Leak test vial • Batteries
• User’s manual
UPC
NO.
01587 2
RLD400
General Tools & Instruments
31
SAFETY
Refrigerant Leak Detectors
HIGH-PERFORMANCE REFRIGERANT LEAK DETECTOR – RLD380L
Ideal for HVAC/R, industrial and automotive applications.
RoHS
FEATURES:
• Detects R-134a, R-404A, R-407C, R-410A,
R-22 (Freon)
• Uses semiconductor sensor and digital signal
processing
• Color-coded display of Hi and Lo leak levels
• Hi/Lo sensitivity switch
• Includes flexible stainless steel gooseneck
probe, reference source
• Fast warmup
• Redundant audible and visual alarms
• Ambient refrigerant concentration reset
• Auto power off
• Low battery alert
• CE, RoHS, WEEE approved
SPECIFICATIONS:
♦ Sensitivities: 6g/yr (Hi) and 30g/yr
(Lo) for R-134a, R-22; 8g/yr (Hi) and
40g/yr (Lo) for R-404A, R-407C, R-410A
♦ Warmup Time: 90 seconds
♦ Auto Power Off: 10 minutes of inactivity
♦ Probe Length: 15.5 in. (394mm)
♦ Operating Altitude: <6500 ft. (1980m)
♦ Operating Temperature and Humidity:
32° to 104°F (0° to 40°C), < 80%RH
♦ Storage Temperature and Humidity:
14° to 140°F (-10° to 60°C), < 70%RH
♦ Dimensions: 6.8"H x 2.6"W x 2.2"D
(173 x 66 x 56mm)
♦ Weight: 14.1 oz. (400g)
♦ Power Source: 4 “AA” batteries (included)
♦ Battery Life: 40 hours of normal use
♦ Warranty: 1 year (limited)
INCLUDES:
• Leak check bottle
• Molded hard case
• Batteries
• User’s manual
RLD380L
UPC
NO.
40141 5
01378 6
RLD380L
RS380 Replacement Sensor
HIGH-PERFORMANCE REFRIGERANT LEAK DETECTOR WITH PUMP –
RLD382P
RoHS
RLD382P
32
General Tools & Instruments
Ideal for HVAC/R, industrial and automotive applications requiring greater sensitivity.
FEATURES:
• Detects R-134a, R-404A, R-407C, R-410A,
R-22 (Freon)
• Uses pump to draw in gas, increasing sensitivity
• Also uses semiconductor sensor and digital
signal processing
• Three-color display of Hi, Medium, Lo leak
levels
• Hi/Lo sensitivity switch
• Includes flexible stainless steel gooseneck
probe, reference source
• Fast warmup
• Redundant audible and visual alarms
• Ambient refrigerant concentration reset
• Auto power off
• Low battery alert
• CE, RoHS, WEEE
approved
SPECIFICATIONS:
♦ Sensitivities: 3g/yr (Hi), 15g/yr (Med)
and 30g/yr (Lo) for R-134a, R-22;
4g/yr (Hi), 20g/yr (Med) and 40g/yr (Lo)
for R-404A, R-407C, R-410A
♦ Warmup Time: 45 seconds
♦ Auto Power Off: 10 minutes of inactivity
♦ Probe Length: 15.5 in. (394mm)
♦ Operating Altitude: <6500 ft. (1980m)
♦ Operating Temperature and Humidity:
32° to 104°F (0° to 40°C), < 80%RH
♦ Storage Temperature and Humidity:
14° to 140°F (-10° to 60°C), < 70%RH
♦ Dimensions: 6.8 x 2.6 x 2.2 in.
(173 x 66 x 56mm)
♦ Weight: 14.1 oz. (400g)
♦ Power Source: 4 “AA” batteries (included)
♦ Battery Life: 7 hours of normal use
♦ Warranty: 1 year (limited)
INCLUDES:
• Leak check bottle
• Molded hard case
• Batteries
• User’s manual
UPC
NO.
00382 4
01378 6
RLD382P
RS380 Replacement Sensor
SAFETY
Data Logging Hot Wire Anemometer
DATA LOGGING HOT WIRE ANEMOMETER WITH CFM/CMM
AND 8:1 IR THERMOMETER – CIH20DL
Ideal for low FPM applications.
FEATURES:
• Measures and displays air speed or airflow
volume in several Imperial or metric units
• Simultaneously measures and displays ambient
temperature from 32° to 158°F (0° to 70°C) in
°F or °C with ±2% accuracy
• Measures air speeds from 2 ft/min to 7874
ft/min (20 mm/sec to 40 m/sec) with ±3%
accuracy
• Measures airflow volumes from 0 to 2.5 million
CFM (0 to 72,000 CMM) with ±3% accuracy
• Displays maximum, minimum or maximum air
speed plus temperature
• Also has 8:1 infrared thermometer for remote,
non-contact measurement of surface
temperatures from -25° to 999°F
(-32° to 538°C) with ±3% accuracy
• Telescoping probe and cable extend reach of
hot wire sensor and thermistor to up to
6 ft. (1.8m)
• Jumbo backlit LCD with three readouts
• Stores/recalls up to nine sets of three readings
in nonvolatile memory
• Time-stamps and saves up to 20,000 data
points at user-selected sampling rate from
5 seconds to 1 hour
• Included USB cable and interface/data logging
software enable transfer of stored data logs
from the meter’s internal memory to a PC for
tabular or graphic display and analysis
• Data hold and auto power off functions
• CE and RoHS approved
SPECIFICATIONS:
♦ Air Flow Volume Measurement
Range/Resolution: 0 to 2,542,700 CFM
(0 to 72,000 CMM)/0.01 CFM (0.001 CMM)
♦ Air Speed Measurement Range/Accuracy:
2 to 7874 ft./min (20 mm/sec to
40 m/sec)/±3%
♦ IR Thermometer Distance-to-spot (D:S) ratio: 8:1
♦ IR Thermometer Emissivity: 0.95 (fixed)
♦ IR Thermometer Measurement Range:
-25° to 999°F (-32° to 537°C)
♦ IR Thermometer Measurement Accuracy:
±3.6°F (2°C) from -4° to 212°F (-20° to 100°C)
♦ IR Thermometer Measurement Resolution:
0.1°max/ (F or C)
♦ IRT Response Time: 0.5 seconds
♦ Memory: Nine readings + Max/Min/Avg
+ Data Hold
♦ Extended length of telescoping hot wire probe:
70.8 in. (1.8m)
♦ Dimensions:
7.24 x 2.75 x 1.57 in. (184 x 70 x 40mm)
♦ Weight: 11.3 oz. (320g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
CIH20DL
INCLUDES:
• USB cable
• PC Interface Software
• AC Adapter
• Hard Carrying Case
• Battery
• User’s manual
Large backlit LCD simultaneously displays air flow volume
or speed from hot wire sensor plus remote
surface temperature from IRTvv
Enables minimally invasive duct flow testing
RoHS
UPC
NO.
01498 1
CIH20DL
A low-speed squirrel cage blower motor
Air movers wrapping up a water damage restoration project
General Tools & Instruments
33
SAFETY
Airflow Meters
DIGITAL ONE PIECE AIRFLOW METER WITH CFM DISPLAY – DCFM8906
RoHS
Ideal for measuring airflow speed and volume output of exhaust fans and blowers.
FEATURES:
• Displays CFM, CMM, FPM, temperature and
knots
• One-handed airflow measurement
• Also measures air temperature
• RS-232 output
• Calculates and displays average, minimum,
and maximum air speed and airflow volume
readings at one point or up to eight points
• Data hold
• °F/°C switch
• CE and RoHS approved
DCFM8906
SPECIFICATIONS:
♦ Airflow Volume Measurement Range:
0 to 99,999 CFM or CMM
♦ Airflow Velocity Measurement Range:
80 to 5900 ft./min (0.4 to 30m/sec)
±3%/1 ft./min (10mm/sec)
♦ Temperature Measurement Range:
14° to 122°F (-10° to 50°C)
♦ Temperature Measurement Accuracy/Resolution:
±2°F (±1°C)/0.1°
♦ Display Size: 1.25 x 1.625 in. (31 x 41mm)
♦ Dimensions: 7 x 2.5 x 1.75 in.
(183 x 76 x 45mm);
Vane diameter: 2.8 in. (70mm)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Molded hard case
• Battery
UPC
NO.
40015 9
12710 0
DCFM8906
ASFT KIT PC Interface Kit (optional)
DIGITAL TWO PIECE AIRFLOW METER
WITH RS-232 COMPUTER INTERFACE – DCFM8901
RoHS
Ideal for measuring airflow volume, airflow velocity, air temperature.
FEATURES:
• Displays CFM, CMM, FPM, MPS and
temperature
• Min/Max memory
• Data hold
• Single point average
• Multi-point average
• RS-232 computer interface
• °F/°C switch
• CE and RoHS approved
DCFM8901
SPECIFICATIONS:
♦ Airflow Volume Measurement Range:
0 to 9,999 CFM or CMM
♦ Airflow Velocity Measurement Range:
80 to 6900 ft./min (0.4 to 35 m/sec)
♦ Airflow Measurement Accuracy/Resolution:
±2%/1 ft./min (10 mm/sec)
♦ Temperature Measurement Range:
14° to 122°F (-10° to 50°C)
♦ Temperature Measurement Accuracy/Resolution:
±1°F (±1°C)/0.1°
♦ Cord Length: 20.5 in.(.5m) extends to 4.5 ft.
(1.14m)
♦ Dimensions of Meter: 7.1 x 2.8 x 1.5 in.
(181 x 71 x 38mm);
Vane diameter: 2.9 in. (73mm)
♦ Weight of Meter: 10.4 oz. (295g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Remote probe • Molded hard case
• Battery • User’s manual
UPC
NO.
40005 0
40006 7
12710 0
DCFM8901
P8901 Replacement Vane (optional)
ASFT KIT PC Interface Kit (optional)
DIGITAL ANEMOMETER WITH CFM – DCFM700
RoHS
Ideal for measuring airflow speed and volume output of exhaust fans and blowers.
FEATURES:
• Displays airflow velocity/volume + temperature
• Stores, recalls 10 values
• Min/Max memory
• Data hold function
• Low battery indication
• Auto power off
• CE and RoHS approved
DCFM700
34
♦ Airflow Measurement Accuracy/Resolution:
General Tools & Instruments
SPECIFICATIONS:
♦ Airflow Volume Measurement Range:
0 to 99,999 CFM or CMM
♦ Airflow Velocity Measurement Range:
0 to 8800 ft./min (0 to 45 m/sec)
♦ Airflow Measurement Accuracy: ±2%
♦ Temperature Measurement Range:
-58° to 158°F (-50° to 70°C)
♦ Temperature Measurement Accuracy/Resolution:
±0.9°F (±0.5°C) from 32° to 122°F
(0° to 50°C); ±1.8°F (±1°C) elsewhere
♦ Operating Temperature:
–14° to 158°F (-10° to 70°C)
♦ Storage Temperature:
–14° to 158°F (-10° to 70°C)
♦ Sampling Period: 1 second
♦ Dimensions:
Meter: 6.9 x 3.3 x 1.4 in. (175 x 85 x 35mm)
Vane: 6.1 x 3 x 1.4 in. (170 x 75 x 35mm)
♦ Weight: 10 oz. (280g)
♦ Power Source: 3 “AAA” batteries (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Molded hard case
• Batteries
• User’s manual
UPC
NO.
40700 4
DCFM700
SAFETY
Airflow Meters
DIGITAL ALL-IN-ONE AIR FLOW METER WITH CFM, BTU, TEMP,
HUMIDITY, DP, FPM, MPH, KPH, MPS, KNOTS AND WET BULB –
WDCFM8912
RoHS
Ideal for measuring airflow speed and volume output of exhaust fans and blowers.
FEATURES:
• One-handed airflow measurement
• Handy recessed service grip
• Single and multi-point average
• RS-232 computer interface
• Min/Max memory
• Data hold
• °F/°C switch
• CE and RoHS approved
SPECIFICATIONS:
♦ Airflow Volume Measurement Range:
0 to 99,999 CFM or CMM
♦ Airflow Velocity Measurement Range:
1 to 6840 ft./min (0.3 to 35 m/sec)
♦ Airflow Measurement Accuracy: ±5%
♦ Temperature Measurement Range:
-4° to 140°F (-20° to 60°C)
♦ Temperature Measurement Accuracy:
±1°F (±0.6°C)
♦ Relative Humidity Measurement Range:
10 to 90%
♦ RH Measurement Accuracy: ±3% of reading
♦ Dew Point/Wet Bulb Temperature
Measurement Resolution: 0.1°F (0.1°C)
♦ Dimensions of Meter:
Vane: 6.7 x 3 x 1.6 in. (170 x 77 x 40mm)
Meter: 6.9 x 2.8 x 1.3 in. (175 x 70 x 33mm)
♦ Weight of Meter: 10.4 oz. (295g)
♦ Power Source: 4 “AA” batteries (included) or
9V AC adapter
♦ Warranty: 1 year (limited)
INCLUDES:
• Hard case
• Batteries
• User’s manual
UPC
NO.
01249 9
01300 7
12710 0
WDCFM8912
WDCFM8912/CERT
ASFT KIT
PC Interface Kit (optional)
P8912
Replacement Vane (optional)
01291 8
WDCFM8912
WDCFM8912CERT
HOT WIRE ANEMOMETER-THERMOMETER WITH EXCEL-FORMATTED
DATA LOGGING SD CARD – HWA4214SD
Ideal for high accuracy measurements of air (wind) speeds as low as 0.5 mph and air
temperatures within ±1.5°F (± 0.8°C).
FEATURES:
• Includes telescoping air speed-temperature
probe
• Displays air (wind) speed in meters/second,
feet per minute, kilometers/hr, knots (nautical
miles per hour), or miles per hour
• Measures air speeds down to 0.2 m/sec with
0.01 m/sec resolution (down to 40 ft/min with
1 ft/min resolution)
• Displays temperature in °F or °C
• Big (2.5 in. diagonal) front-panel green backlit
LCD is easy to read
• Displays maximum and minimum readings and
holds any reading
• Automatically logs measurements at sampling
time settable from one second to one hour
• Also supports manual data logging and
changing of SD card storage location
• Auto power off function
SPECIFICATIONS:
♦ Display: 2.05 x 1.5 in. (52 x 38mm) LCD
♦ Parameters Measured: Air speed, temperature
♦ Measurement Range:
• For air speed: 0.2 to 25 m/sec, 0.7 to
172 km/hr, 0.5 to 44.7 mph, 0.4 to
38.8 knots, 40 to 3940 ft/min
• For temperature: 32° to 122°F (0° to 50°C)
♦ Measurement Accuracy:
• For air speed: ± (5% + 0.1 m/sec),
± (5% + 0.3 km/hr), ± (5% + 0.2 mph),
± (5% + 0.2 knots), ± (5% + 20 ft/min)
• For temperature: ± 1.5°F (± 0.8°C)
♦ Data Logging Sampling Time:
1 second to 1 hour
♦ Settable Parameters: Date, time, auto power off,
beep sound, sampling time, decimal point or
comma decimal division, temperature unit, air
speed unit, optional thermocouple type (K or J)
♦ Storable/Recallable Readings: Maximum,
minimum
♦ Operating Temperature:
32° to 122°F (0° to 50°C)
♦ Operating Relative Humidity: 0 to 85%
♦ Dimensions of Instrument:
7.99 x 2.99 x 1.50 in. (203 x 76 x 38mm)
♦ Weight of Instrument: 1.13 lb. (515g)
♦ Dimensions of Probe: 0.4724 in. (diameter) x
11.02 in.(collapsed)/37 in.(extended)
(12mm x 280mm/940mm)
♦ Power Source: 6 “AA” batteries (not included) or
optional 9-VDC AC adapter
♦ Dimensions: 11.25 x 9.88 x 3.00 in.
(285.75 x 251 x 76.20mm)
♦ Weight: 36 oz. (1021g)
♦ Warranty: 1 year (limited)
UPC
01456 1
01548 3
NO.
HWA4214SD
P4214SD Replacement Probe
Optional Accessories:
01506 3
25015 0
25005 1
25003 7
01502 5
AC1 9VDC adapter for 110V power supply
TPK500 -50° to 500°F “K” type thermocouple
TPK05 -40° to 562°F “K” type thermocouple
TPK03 -40° to 950°F “K” type thermocouple
SDRD1 SD Card Reader
Patented
HWA4214SD
Included Accessories:
• Hard carrying case
• Telescoping air speed/temperature probe
• 2 GB SD memory card
• User’s manual
General Tools & Instruments
35
SAFETY
Pressure Meters
HIGH RESOLUTION DIGITAL MANOMETERS – DM8252, DM8252RS
RoHS
Ideal for low static, negative pressure testing.
FEATURES:
• Digital display of gauge or differential pressure
• Display unit options: psi, inH2O, mmH2O, bar
and mbar
• Bright backlight
• Min/Max memory + data hold
• Simple fittings for hose connection
• DM8252RS includes four (4) rubber stoppers for
duct smoke detectors
• CE and RoHS approved
UPC
NO.
41216 9
41220 6
12710 0
DM8252
DM8252RS w/4 Rubber Stoppers
ASFT KIT PC Interface Kit (optional)
DM8252
DM8252RS
SPECIFICATIONS:
♦ Measurement Range: 0 to 2 psi (0 to 55 inH2O)
♦ Accuracy: ±0.3%
♦ Resolution (bar): 0.01
♦ Response Time: 0.5 seconds
♦ Operating Temperature:
32° to 122°F (0° to 50°C)
♦ Dimensions:
7.2 x 2.8 x 1.2 in. (182 x 72 x 30mm)
♦ Weight: 7.6 oz. (215g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Connection hose
• Molded hard case
• Battery
• User’s manual
DELUXE DIGITAL MANOMETER – DM8215
RoHS
Ideal for industrial pressure testing.
FEATURES:
• Digital display of gauge or differential pressure
• Display unit options: psi, inH2O, bar, mmHg,
ozin2, kgcm2, kPa, ftH2O, inHg, cmH2O & mbar
• Bright backlight
• Min/Max memory + data hold
• Simple fittings for hose connection
• RS-232 computer interface
• CE and RoHS approved
SPECIFICATIONS:
♦ Measurement Range/Resolution:
DM8215: 0 to 15 psi/0.01 psi
♦ Measurement Accuracy: ±3% of full scale value
♦ Response Time: 0.5 seconds
♦ Operating Temperature:
32° to 122°F (0° to 50°C)
♦ Dimensions:
7.2 x 2.8 x 1.2 in. (182 x 72 x 30mm)
♦ Weight: 7.6 oz. (215g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Connection hose
• Molded hard case
• Battery
• User’s manual
DM8215
UPC
41215 2
12710 0
NO.
DM8215
ASFT KIT PC Interface Kit (optional)
HYDROGAUGE MANOMETER – HG15
Ideal for an inexpensive way of making pressure measurements.
FEATURES:
• Replaces ordinary U-tube manometers
• Measures gas pressure easily and efficiently
• Direct reading, no plus or minus readings to add
together as in old fashioned U-tubes
• Fills like a glass of water, no more troublesome
air bubbles
• Strong magnet for mounting
• Heavy-duty construction
• Made of industrial grade, flexible PVC plastic
• Lightweight
• Easy to use
HG15
36
General Tools & Instruments
SPECIFICATIONS:
♦ Water Column Height: 15 in. (381mm)
♦ Hose Fitting: All brass
♦ Hose Length: 30 to 36 in. (762 to 914mm)
♦ Dimensions: 24.00 x 3.50 x 0.88 in.
(610 x 89 x 22mm)
♦ Weight: 5.50 oz. (156g)
♦ Warranty: 1 year (limited)
INCLUDES:
• Mounting magnet
UPC
41225 1
NO.
HG15
SAFETY
Pressure Meters
PRESSURE METER WITH EXCEL-FORMATTED DATA LOGGING SD CARD – PM930SD
Ideal for high accuracy measurements of hydraulic or pneumatic pressure using ten different units.
FEATURES:
• Measures hydraulic or pneumatic pressure
using optional sensors with full-scale ranges
from 2 to 400 bar
• Choose a sensor with the right range for your
application from the list at lower right
• Sensors calibrated by single push of a button
• Ten different pressure units selectable via
front panel
• Displays maximum and minimum readings
• Performs real-time automatic data logging
at sampling time settable from 1 second to
9 hours
• Also supports manual logging and changing
of card storage location
• Big (2.5 in. diagonal) front-panel green backlit
LCD is easy to read
• Auto power off function
SPECIFICATIONS:
♦ Display Size: 2.05 x 1.5 in. (52 x 38mm)
♦ Displayed Pressure Unit: bar, psi, inches Hg,
inches H2O, hPA, kPA, kg/cm2, mm Hg, meters
H2O, atmospheres
♦ Measurement Accuracy: ± 0.5% of full-scale
reading + 1 digit
♦ Storable/Recallable Readings: Maximum,
minimum
♦ Data Logging Sampling Time: 1 second to
Patented
9 hours
♦ Settable Parameters: Date, time, auto power
off, beep sound, sampling time, decimal point
or comma decimal division, optional pressure
sensor’s full-scale range (2, 5, 10, 20, 50, 100,
200 or 400 bar)
♦ Operating Temperature:
32° to 122°F (0° to 50°C)
♦ Operating Relative Humidity: 0 to 85%
♦ Dimensions:
6.97 x 2.68 x 1.77 in. (177 x 68 x 45mm)
♦ Weight: 0.77 lb. (350g)
♦ Power Source: 6 “AA” batteries (not included)
or optional 9-VDC AC adapter
♦ Warranty: 1 year (limited)
UPC
01450 9
NO.
PM930SD
Optional Accessories:
01506 3
01491 2
01528 5
01527 8
01532 2
01533 9
01534 6
01502 5
AC1 9VDC adapter for 110V power supply
PS2 2 bar full-scale pressure sensor
PS5 5 bar full-scale Pressure sensor
PS10 10 bar full-scale Pressure sensor
PS50 50 bar full-scale Pressure sensor
PS100 100 bar full-scale Pressure sensor
PS400 400 bar full-scale Pressure sensor
SDRD1 SD Card Reader
Included Accessories:
• Carrying case
• 2 GB SD memory card
• User’s manual
PM930SD
GPK005
GAS PRESSURE TEST KIT – GPK005, GPK015, GPK035
Ideal for ruggedized heavy-duty field use.
FEATURES:
• Measures natural gas (methane) or LP gas
pressure across appliance manifolds
• Tests gas stoves, furnaces, dryers and other
gas appliances. Can also be used for other
non-corrosive gases
• Large 2.5 in. diameter diaphragm gauge is
calibrated in inches of water column,
also shows ounces per square inch
(GPK015/GPK035 only); GPK005 is calibrated in
psi and meets requirements of the New York
City Fuel Gas Code (2008)
• Magnified lens
• Easier to use than a manometer
SPECIFICATIONS:
♦ Measurement Range GPK005: 0 to 5 psi
♦ Measurement Range GPK015:
0 to 15 inches of water column (in. H2O)
0 to 9 ounces per square inch (oz./in2)
♦ Measurement Range GPK035:
0 to 35 inches of water column (in. H2O)
0 to 20 ounces per square inch (oz./in2)
♦ Warranty: 1 year (limited)
INCLUDES:
• 2.5 in. (64mm) diameter diaphragm gauge
• 39 in. (991mm) of rubber tubing
• 3/8 in. (10mm)NPT brass fitting for quick
connection to appliance manifold
• Hose clamp
• Molded hard case
UPC
01585 8
41240 4
41230 5
NO.
GPK005
GPK015
GPK035
GPK015
GPK035
General Tools & Instruments
37
INDUSTRIAL
Specialty Instruments
WATER ALARM – WA500
Ideal for detecting leaks from HVAC systems, plumbing, appliances, water heaters etc.
FEATURES:
• Alarm sounds when water is detected
• Helps reduce water damage
• Finds mold-causing moisture
• Low battery indicator
SPECIFICATIONS:
♦ Dimensions:
4.3 x 4.3 x 1 in. (109 x 109 x 25mm)
♦ Weight: 4 oz. (113g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
UPC
NO.
80140 8
WA500
WA500
REFRACTOMETER – REF401
Ideal for testing Polyglycol/Antifreeze.
FEATURES:
• Used to check freezing point of Glycol from
-60° to 32°F at Specific Gravity of 1.15 to 1.3
with 10°F resolution
REF401
INCLUDES:
• Calibration screwdriver
• Plastic pipette
• Carrying case
SPECIFICATIONS:
♦ Dimensions: 8.75 x 3.00 x 2.00in.
(220 x 76 x 51mm)
♦ Weight: 8.90 oz. (252g)
♦ Warranty: 1 year (limited)
UPC
NO.
44401 6
REF401
DIGITAL CHARGING SCALE – DS300RC
Ideal for accurate charging of refrigerant containers.
FEATURES:
• Constructed from rigid die cast aluminum
• Heavy duty load cell, built-in overload
protection
• Low battery warning with auto power off
• Reading may be zeroed out at any time
• Reliable membrane key pad switches
• Displays readings in lb., oz. and kg
• Extra large LCD display
• Display unit is desk or wall mountable
DS300RC
SPECIFICATIONS:
♦ Measurement Range: 0 to 220 lb. (0 to 100kg)
♦ Measurement Accuracy: ± 1%
♦ Resolution: 0.5 oz. (5g)
♦ Operating Temperature:
32° to 115°F (0° to 45°C)
♦ Platform Dimensions:
8-3/4 x 8-3/4 in. (220 x 220mm)
♦ Weight: 116 oz. (3288g)
♦ Power Source: 1 “9V” battery (included)
♦ Battery Life: 40 hours (typical))
♦ Warranty: 1 year (limited)
INCLUDES:
• Molded hard case
• Battery
UPC
01245 1
NO.
DS300RC
CONTACT/NON-CONTACT LASER TACHOMETER – PCT2236B
Ideal for making rotational or linear speed measurements.
FEATURES:
• Two measurement modes
• Auto power off (with disable)
• Wide measuring range
• Jumbo 5-digit LCD display
• Memory: Min/Max/Last
• Non-contact mode uses laser targeting
PCT2236B
38
General Tools & Instruments
CONTACT SPECIFICATIONS:
♦ Measurement Range: 0.5 to 99,999 RPM
♦ Accuracy: ±0.04% + 2 digits
♦ Resolution: 0.001; 0.01; 0.1; 1 RPM
(depends on scale)
♦ Sampling Period: 1 second
NON-CONTACT SPECIFICATIONS:
♦ Measurement Range: 2.5 to 99,999 RPM
♦ Accuracy: ±0.05% + 1 digit
♦ Resolution: 0.1; RPM; (2.5 to 999 RPM);
1 RPM over 1,000 RPM)
♦ Sampling Period: 1 second
♦ Dimensions: 5.9 x 2 x 1.3 in. (150 x 51 x 33mm)
♦ Weight: 6.50 oz. (184.27g)
♦ Power Source: 4 “AA” batteries (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• RPM adapters
• Adhesive reflective tape
• Hard case
• 4 “AA” batteries
• User’s manual
UPC
42110 9
NO.
PCT2236B
INDUSTRIAL INSTRUMENTS
Tachometers
RoHS
SPECIFICATIONS
Model No.
Name
Measurement Range
Display
Accuracy
Max Distance to Target
(Non-contact mode)
Memory
What’s Included
LT2234C
CT6235B
PCT2236B
PCT900
Non-contact Laser
Tachometer
Contact Tachometer
Contact/Non-contact
Laser Tachometer
Combination
Contact/Non-contact
Laser Tachometer
2.5 to 99,999 rpm
0.5 to 19,999 rpm
10 to 99,999 rpm
5-digit LCD
±0.05% of reading + 1 digit
5-digit LCD
±0.05% of reading + 1 digit
20 in. (500mm)
n/a
96 measurements
+ Min, Max, Last readings
96 measurements
+ Min, Max, Last readings
96 measurements
+ Min, Max, Last readings
Hard carrying case,
reflective tape,
batteries
Hard carrying case,
rpm adapters
batteries
Hard carrying case
reflective tape,
rpm adapters,
batteries
Non-contact: 6 to 99,999 rpm
Contact: 6 to 25,000 rpm
5-digit LCD
5-digit LCD
±0.04% of reading + 2 digits ±0.01% of reading +1 digit up
to 6,000 rpm; ±0.05%
of reading +1 digit above
6,000 rpm
20 in. (500mm)
39 in. (1m)
40 points (10 each selectable
Min, Max, Avg, Data
measurements)
Hard carrying case,
reflective tape,
rpm adapters,
COMBINATION CONTACT/NON-CONTACT LASER TACHOMETER – PCT900
Ideal for a wide variety of RPM and surface speed measurements.
FEATURES:
• Counts total revolutions and measures
rotational speeds as well as surface speeds
and lengths
• Non-contact RPM measurements up to 1m
from target
• Super-accurate (±0.01%) rpm measurements
• LCD display
• Auto power off
• 40 point memory: 10 selectable Max, Min, Avg
and Data measurements
• CE and RoHS approved
SPECIFICATIONS:
♦ Rotational Speed Measurement Ranges:
6 to 25,000 rpm (contact), 6 to 99,999 rpm
(non-contact)
♦ RPM Measurement Accuracy: ±0.01% + 1 digit
from 6 to 6,000 rpm; ±0.05% + 1 digit above
6,000 rpm
♦ Surface Speed Measurement Range:
2 to 8202 ft./min (0.6 to 25,000 m/min)
♦ Length Measurement Range:
0.3 to 32,808 ft. (0.1 to 9,999m)
♦ Length/Surface Speed Measurement
Accuracy: ±0.5% + 1 digit
♦ Response Time: 1 second
♦ Operating Temperature:
32° to 122°F (0° to 50°C)
♦ Dimensions:
7.75 x 1.93 x 1.14 in. (146 x 49 x 29mm)
♦ Weight: 1 lb. (451g) without battery
♦ Power Source: 1 "9V" battery (not included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Cone adapter
• Funnel adapter
• Contact adapter
• Master wheel
(100mm)
• Reflective tape
• Hard case
• User’s manual
UPC
40900 8
CONTACT
APPLICATION
RoHS
NO.
PCT900
NON-CONTACT
APPLICATION
— LASER
SIMULATION
PCT900
General Tools & Instruments
39
ELECTRICAL
AC & AC/DC TRMS Clamp Meters
AUTO RANGING AC/DC TRUE RMS 400 AMP CLAMP METER – DAMP68
Ideal for HVAC/R technicians. Also measures capacitance, frequency and temperature.
FEATURES:
• 11 functions, 34 ranges
• Measures temperature from -40° to 752°F
(-40° to 400°C) using included “K” type
thermocouple
• Computes and displays True RMS values
• Verifies integrity of diodes and checks circuits
for continuity
• Jumbo 3-3/4 digit (4000 count) backlit LCD
+ analog bar graph
• Ergonomic design with rugged rubber housing
• Hall effect clamp jaw
• Auto and Manual ranging and MIN/MAX display
options
• Data HOLD and REL (zero) buttons
• Safety rated CAT III 600V
• 1 year limited warranty
400A
AC/DC
TRMS
DAMP68
♦ Frequency Ranges / Accuracy: 0 to 100Hz/1kHz/
10kHz/100kHz/1Mhz/10MHz / ±2%
♦ Capacitance Ranges / Accuracy:
0 to 40nF/400nF/4μF/40μF/400μF/4000μF /
±(4% + 5 digits)
♦ Temperature Range (via “K” type thermocouple)
/ Accuracy: 40° to 752°F (-40° to 400°C)
±(1.2% + 6 digits) from 32° to 212°F
♦ Maximum Resolutions: 0.1A, 0.1mV, 0.1Ω,
0.01Hz, 0.01nF, 1°
♦ Clamp Jaw Type / Opening:
Coil-Type + Hall effect / 1.48 in. (37.5mm)
♦ Dimensions: 11.38 x 6.25 x 2.75 in. /
(289 x 159 x 70mm)
♦ Weight: 19 oz. (539g)
♦ Power Source: 3 “AAA” batteries (included)
INCLUDES:
• “K” type thermocouple probe
• Test leads
• Batteries
• Carrying case
• User’s manual
SPECIFICATIONS:
♦ AC Current Measurement Range / Accuracy:
0 to 400A / ±(3% + 10 digits)
♦ DC Current Range (via clamp) / Accuracy:
0 to 400A / ±(3% + 5 digits)
♦ AC Voltage Ranges / Accuracy:
0 to 400mV/4V/40V/400V/600V /
±(2% + 10 digits) or better
♦ DC Voltage Ranges / Accuracy:
0 to 400mV/4V/40V/400V/600V /
±(0.8% + 5 digits)
♦ Resistance Ranges / Accuracy:
0 to 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ /
±(2% + 5 digits) or better
UPC
NO.
01369 4
01521 6
DAMP68
ACL10 15A Line Splitter (optional)
KEY FEATURES &
!"#$#%&'&$()$(*&#'+$&
!"#$%&'#()*+#,-(
678/9-%-$%&'#/:;<-(;'=>
B+C-%D/*+%&#,
F+<+G-%-<(/H-+("<->
600A
AC
AUTO RANGING 600A AC CLAMP METER – DAMP60
Ideal for general-purpose work.
DAMP60
FEATURES:
• 7 functions, 19 ranges
• Verifies integrity of diodes and checks circuits
for continuity
• Jumbo 3-1/2 digit (2000 count) backlit LCD
• Ergonomic design with rugged rubber housing
• Coil-type clamp jaw
• Autoranging and MAX display options
• Data HOLD and REL (zero) buttons
• Safety rated CAT III 600V
• 1 year limited warranty
SPECIFICATIONS:
♦ AC Current Measurement Ranges/Accuracy:
0 to 200A/600A / ±(3% + 5 digits)
♦ AC Voltage Ranges / Accuracy:
0 to 2V/20V/200V/600V / ±(1% + 5 digits)
♦ DC Voltage Ranges / Accuracy:
0 to 200mV/2V/20V/200V/600V /
±(0.8% + 5 digits)
♦ Resistance Ranges / Accuracy:
0 to 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ /
±(2% + 5 digits) or better
40
General Tools & Instruments
♦ Frequency Range / Accuracy:
10 to 1999Hz / ±(3% + 10 digits)
♦ Max Resolutions: 0.1A, 0.1mV,
0.1Ω, 1Hz
♦ Clamp Jaw Type / Opening:
Coil type / 1.48 in. (37.5mm)
♦ Dimensions:
11.25 x 6.13 x 2.75 in. /
(286 x 156 x 70mm)
♦ Weight: 17 oz. (482g)
♦ Power Source:
2 “AAA” batteries (included)
INCLUDES:
• Test leads
• Batteries
• Carrying case
• User’s manual
UPC
NO.
01356 4
01521 6
DAMP60
ACL10
15A Line Splitter
(optional)
:*HB
?7/7"<<-#%/*+#,-/MI&+/$=+GKN
97/7"<<-#%/*+#,-/MI&+/$=+GKN
?7)97/8'=%+,-/*+#,H+O/7'"#%)H+O/7"<<-#%/P/
8'=%+,-/*-('="%&'#(
*-(&(%+#$-/*+#,!<-J"-#$D/*+#,7+K+$&%+#$-/*+#,:-GK-<+%"<-/*+#,-/
MI&+/[\]/%DK-/%;-<G'$'"K=-N
7=+GK/a+W/:DK-/)
bK-#&#,
?#+=',/d+</e<+K;
*+#,&#,/bK%&'#(
f-<'/bCC(-%
9+%+/T'=>
H-G'<D
7'#%&#"&%D/:;<-(;'=>
9"%D/7D$=-/*+#,-
9&G-#(&'#(
i-&,;%
F'W-</B'"<$-
ELECTRICAL
AC/DC TRMS Clamp Meters
AUTO RANGING TRUE RMS AC/DC CLAMP METERS
• CM660: 0 TO 600A RANGE, 0.01A MAX RESOLUTION
• CM700: 0 TO 1000A RANGE, 0.1A MAX RESOLUTION
Ideal for electricians, HVAC/R contractors, building maintenance professionals and maintenance/repair/operations (MRO) technicians
FEATURES:
• 16 functions, 49 ranges
• Measures temperature from 40° to 932°F
(-40° to 500°C) using included “K” type
thermocouple
• Uses beeper to verify integrity of diodes and
check circuits for continuity
• 0-2000µA DC range for measuring flame rod
current with 0.1μA resolution using included
test leads
• Built-in Non-Contact Voltage (NCV) detector with
4 sensitivity settings & audible and visual alerts
• More and better features than competitive units
in same price class
• Large backlit digital LCD with two 6000-count
readouts for simultaneous display of real-time
current or voltage on primary readout and line
frequency on secondary readout
• Fast-response analog bar graph
• Bright LED work light
• Auto and Manual ranging and MIN/MAX options
• Data HOLD and REL (zero) buttons
• Fast PEAK HOLD function for measuring inrush
current during motor startup
• 1.57 in. (40mm) jaw opening (largest in its
class) for conductors up to 550 MCM resists
side torque
• Rugged housing can survive multiple drops onto
concrete from height of 5 ft. (1.6m)
• Safety rated CAT III 1000V, CAT IV 600V
• 1 year limited warranty
♦ Capacitance Ranges / Accuracy:
0 to 6nF/60nF/600nF/6μF/60μF/600μF/
6000μF/60,000μF / ±(4% ± 5 digits)
♦ Temperature Range (via “K” type thermocouple) /
Accuracy: -40° to 932°F (-40° to 500°C) /
±(5% + 3.3°F) from -40° to 14°F;
±(1% + 1.5°F) from 14° to 932°F
♦ Duty Cycle Range / Accuracy: 5 to 95% / ±3%
♦ Maximum Resolutions: 0.1A (CM600), 0.01A
(CM700), 0.1mV, 0.1Ω, 0.01Hz, 0.001nF,
2°F/1°C, 0.1%
♦ Clamp Jaw Type / Opening:
Coil Type + Hall effect / 1.57 in. (40mm)
♦ Dimensions: 8.86 x 3.31 x 1.30 in. /
(225 x 84 x 33mm)
♦ Weight: 12.4 oz. (350g)
♦ Power Source: 3 “AAA” batteries (included)
SPECIFICATIONS:
♦ AC Current Measurement Ranges / Accuracy:
0 to 60A/600A (CM660), 0 to 600A/1000A
(CM700) / ±(1.8% + 5 counts)
♦ DC Current Ranges (via clamp) / Accuracy:
0 to 60A/600A (CM660), 0 to 600A/1000A
(CM700) / ±(3% + 5 digits)
♦ AC Voltage Ranges / Accuracy:
0 to 600mV/6V/60V/600V ±(0.8% + 3 digits)
♦ DC Voltage Ranges / Accuracy:
0 to 600mV/6V/60V/600V / ±(0.5% + 3 digits)
♦ Resistance Ranges / Accuracy:
0 to 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ /
±(0.8% + 3 digits)
♦ Frequency Ranges / Accuracy: 10Hz to
60Hz/600Hz/6kHz (clamp jaw); 10Hz to
60Hz/600Hz/6kHz/60kHz/600kHz/6MHz/60MHz
(test leads) / ± (1.5% + 5 digits) (clamp jaw);
±(0.3% + 5 digits) (test leads)
INCLUDES:
• Double-insulated test leads
• “K” type thermocouple probe
• Batteries
• Carrying case
• User’s manual
UPC
NO.
01629 9
01633 6
01521 6
CM660
CM700
ACL10 15A Line Splitter (optional)
SPECIFICATIONS COMPARISON
,-."/0
./!"#$%&'#(0/12/*+#,-(
6)?
7?:/EEE/4AA8
,-."/1
2.//0
2.300
11/!"#$%&'#(0/31/*+#,-(
14/!"#$%&'#(0/52/*+#,-(
14/!"#$%&'#(0/52/*+#,-(
/
/ /
/
/ /
/
/ /
@A8?7
@A8?7
6)?
7?:/EEE/4AA8
7?:/EEE/1AAA80/7?:/E8/4AA8
7?:/EEE/1AAA80/7?:/E8/4AA8
/ /
/ /
/ /
/
/ /
?7)97/$"<<-#%0/?7)97/
?7)97/$"<<-#%0/?7)97/
?7)97/$"<<-#%0/?7)97/
I'=%+,-0/<-(&(%+#$-0/
I'=%+,-0/<-(&(%+#$-0/
?7/$"<<-#%0/?7)97/I'=%+,-0/
I'=%+,-0//<-(&(%+#$-0/
C<-J"-#$D0/$'#%&#"&%D0/
C<-J"-#$D0/$'#%&#"&%D0/
<-(&(%+#$-0/C<-J"-#$D0/
C<-J"-#$D0/$'#%&#"&%D0/
>&'>-/&#%-,<&%D0/
>&'>-/&#%-,<&%D0/
$'#%&#"&%D0/>&'>-/&#%-,<&%D
>&'>-/&#%-,<&%D0/
$+K+$&%+#$-0/%-GK-<+%"<-0/ $+K+$&%+#$-0/%-GK-<+%"<-0/
$+K+$&%+#$-0/%-GK-<+%"<>"%D/$D$=>"%D/$D$=6)?
L-(
L-(
L-(
/A/%'/1AAA?
/
A/%'/4AA?
/A/%'/5AA?
/
/ A/%'/4AA?
/
/A/%'/1AAA?
/
6)?
A/%'/5AA?
/ A/%'/4AA?
/
/ A/%'/4AA8
/
A/%'/4AA8
/A/%'/4AA8
/
/ A/%'/4AA8
/
QAAA)AR1?0/AR1G8
5AAA)AR1?0/AR1G8
/
4AAA)ARA1?0/AR1G8
/
4AAA)AR1?0/AR1G8
/
A/%'/QAHS
/A/%'/5AHS
/
/A/%'/4AHS
/
/ A/%'/4AHS
/
1A/%'/1222TU
A/%'/2R222HTU
/ /
6)?
7'&=^%[email protected]/&#R/M3.R_GGN
6)?
?"%'<+#,&#,/'#=D
6)?
L-(
H+O/I+="-
A/%'/5AAAY!
/^5A/%'/._Q`!
/M^5A`/%'/5AA`7N
7'&=/:DK-/c/T+==/-CC-$%0
[email protected]/&#R/M3.R_GGN
/ /
L-(
?"%'/'</G+#"+=
/
L-(
L-(
/ 6'
1A/%'/1AAATU/"(&#,/
$=+GK/V+WX/1ATU/%'/1AHTU/
/ /
"(&#,/%-(%/=-+>(
/A/%'/4A0AAAZ!
/
^5A`/%'/23Q`!/
M^5A`/%'/_AA`7N
7'&=/:DK-/c/T+==/-CC-$%0
1R_./&#R/M5AGGN
1A/%'/1AAATU/"(&#,/
$=+GK/V+WX/1ATU/%'/1AHTU/
"(&#,/%-(%/=-+>(
/ A/%'/4A0AAAZ!
/
^5A`/%'/23Q`!/
/ /
/
M^5A`/%'/_AA`7N
/ /
7'&=/:DK-/c/T+==/-CC-$%0
1R_./&#R/M5AGGN
L-(
?"%'/'</G+#"+=
/ /
L-(
L-(
H&#0/H+O/I+="-(
L-(
?"%'/'</G+#"+=
/ /
L-(
L-(
H&#0/H+O/I+="-(
/
/
g/_AS
/g/_AS
6)?
11RQ_/O/4R13/O/QR._/&#R
[email protected]//O/1_4/O/.AGGN
1./'UR/[email protected],N
Q/[???]/j+%%-<&-(/
M&#$=">->N
6)?
[email protected]/O/4RQ_/O/QR._/&#R
[email protected]/O/1_2/O/.AGGN
/12/'UR/M_32,N
/ /
3/[???]/j+%%-<&-(
/M&#$=">->N
/g/_AS
_RA/%'/22R_h
/ g/_AS
_RA/%'/22R_h
/ /
@[email protected]/O/3R31/O/1R3A/&#R
MQQ_/O/@5/O/33GGN
/ 1QR5/'UR/M3_A,N
/ /
3/[???]/j+%%-<&-(
/M&#$=">->N
@[email protected]/O/3R31/O/1R3A/&#R
MQQ_/O/@5/O/33GGN
6)?
1QR5/'UR/M3_A,N
/ /
/
/
/ /
CM660
/
/
/ /
600A
AC/DC
TRMS
/ /
/ /
/ /
/
/ /
/ /
/ /
/ /
/
1000A
AC/DC
TRMS
/ /
/
/
/
/ /
/
CM700
/
3/[???]/j+%%-<&-(
/M&#$=">->N
General Tools & Instruments
41
ELECTRICAL
Multimeters
MANUAL RANGING DIGITAL MULTIMETER W/BACKLIGHT – DMM40
Ideal for measuring AC/DC voltage, DC current, resistance.
FEATURES:
• Easy to use, with large bright display
• Also checks continuity and diode integrity
• CAT III 600V ETL rated
• Large backlit 3-1/2 digit (1999 count) LCD
• High-impact thermoplastic case
DMM40
SPECIFICATIONS:
♦ AC Voltage Measurement Range/Accuracy:
0 to 500V over two ranges/±(2.5% + 5 digits)
♦ DC Voltage Measurement Range/Accuracy:
0 to 500V over five ranges/±(1.2% + 2 digits)
♦ DC Current Measurement Range/Accuracy:
0 to 200 mA over four ranges/±(1.8% + 2 digits)
♦ Resistance Measurement Range/Accuracy:
0 to 20MΩ over 5 ranges/±(1.5% + 2 digits)
♦ Digit Height: 0.68 in. (17mm)
♦ Operating Temperature: 32° to 122°F (0° to 50°C)
♦ Dimensions:
5.5 x 3.4 x 1.3 in. (140 x 85 x 34mm)
♦ Weight: 6.5 oz. (184g) with battery
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Test leads
• Battery
• User’s manual
UPC
NO.
50122 1
DMM40
DIGITAL MULTIMETER—AUTO RANGING W/BACKLIGHT – DMM45
Ideal for measuring AC/DC voltage, AC/DC current, resistance.
FEATURES:
• Easy to use, with large bright display
• Also measures temperature with included
“K” type thermocouple probe
• Also checks continuity and diode integrity
• Auto ranging
• CAT III 600V ETL rated
• Large backlit 3-1/2 digit (1999 count) LCD
• High-impact thermoplastic case
DMM45
SPECIFICATIONS:
♦ AC Voltage Measurement Range/Accuracy:
0 to 500V/±(0.8% + 5 digits)
♦ DC Voltage Measurement Range/Accuracy:
0 to 500V/±(0.5% + 5 digits)
♦ AC Current Measurement Range/Accuracy:
0 to 200 mA/±(1.8% + 3 digits)
♦ DC Current Measurement Range/Accuracy:
0 to 200 mA/±(1.8% + 2 digits)
♦ Resistance Measurement Range/Accuracy:
0 to 20MΩ/±(0.8% + 5 digits) under 1MΩ;
±(2% + 5 digits) above 1MΩ
♦ Temperature Measurement Range/Accuracy:
-40° to 752°F (-40° to 400°C)/±(1.2% + 7
digits) from 32°F to 212°F
♦ Digit Height: 0.63 in. (16mm)
♦ Operating Temperature: 32° to 122°F (0° to 50°C)
♦ Dimensions: 5.5 x 3.4 x 1.3 in. (140 x 85 x 34mm)
♦ Weight: 6.5 oz. (184g) with battery
♦ Power Source: 2 “AAA” batteries (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• “K” type probe
• Test leads
• Batteries
• User’s manual
UPC
NO.
50123 8
DMM45
DIGITAL UL LISTED MULTIMETER – DMM20UL
• Ideal for measuing AC/DC voltage, DC current, resistance, continuity, diode integrity.
FEATURES:
• 20 ranges
• Economical and pocket-sized
• Large LCD display
• Safety-recessed test lead sockets
• High-impact thermoplastic case
• UL listed
SPECIFICATIONS:
♦ AC Voltage Measurement Range/Accuracy:
0 to 600V/±2.5%
♦ DC Voltage Measurement Range/Accuracy:
0 to 600V/±2%
♦ DC Current Measurement Range/Accuracy:
0 to 10A/±1%
DMM20UL
42
General Tools & Instruments
♦ Resistance Measurement Range/Accuracy:
0 to 20M⍀/±1.5%
♦ Dimensions: 9.00 x 5.50 x 1.25 in.
(228.6 x 139.7 x 31.75mm)
♦ Weight: 8.00 oz. (226.8g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Test leads
• Battery
• Operating instructions
UPC
NO.
50121 4
DMM20UL
ELECTRICAL
Multimeters
ANALOG MULTIMETER – AM35UL
Ideal for measuring DC current and resistance, AC/DC voltage.
FEATURES:
• DC current, resistance
• 13 Ranges
• Fuse and diode protected
• Single knob function and range selector switch
• Self-storing leads
• Eliminates AC ghosting voltages
• UL listed
SPECIFICATIONS:
♦ AC/DC Voltage Measurement Range: 0 to 500V
♦ DC Current Measurement Range: 0 to 250mA
♦ Resistance Measurement Range: 0 to 1M⍀
♦ Dimensions: 4 x 2.5 x 0.75 in. (102 x 64 x 19mm)
♦ Weight: 2.75ozs (77.96g)
♦ Power Source: 1 “AA” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Test leads • Battery • Operating instructions
UPC
NO.
50005 7
AM35UL
AM35UL
ECONOMY DIGITAL MULTIMETER WITH LED AND CONTINUITY BEEPER –
DMM830HS
Ideal for audible continuity indications.
FEATURES:
• 20 ranges
• 3-1/2-digit LCD
• Red LED identifies hot side lead
• Ground disconnect check circuit
SPECIFICATIONS:
♦ AC Voltage Range/Accuracy:
0 to 750V/±(1.2% + 10 digits) or better
♦ DC Voltage Range/Accuracy:
0 to 1000V/±(1.2% + 2 digits) or better
♦ DC Current Range/Accuracy:
0 to 10A/±(2% + 2 digits) or better
♦ Resistance Range/Accuracy:
0 to 2M⍀/±(1% + 2 digits)
♦ Input Impedance: 10M⍀ for all ranges
♦ hFE Range: 0 to 1000
♦ Display Digit Height: 0.5 in. (13mm)
♦ Operating Temperature: 32° to 122°F
(0° to 50°C) @ <80% relative humidity
♦ Dimensions: 5.2 x 2.8 x 1.0 in. (132 x 70 x 25mm)
♦ Weight: 4.9 oz. (138.9g)
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Test leads • Battery • Operating instructions
UPC
NO.
50100 9
DMM830HS
DMM830HS
DIGITAL SERVICE MULTIMETER – DMM51FSG
Ideal for HVAC/R and industrial applications.
FEATURES:
• 34 overload-protected ranges
• Jumbo 3-1/2-digit (1999 count) LCD
• Protective boot with 3-position tilt stand
• Low battery alert
SPECIFICATIONS:
♦ AC Voltage Range/Accuracy:
0 to 750V/±(1.2% + 3 digits) or better
♦ DC Voltage Range/Accuracy:
0 to 1000V/±(0.8% + 2 digits) or better
♦ AC/DC Current Range/Accuracy:
0 to 10A/±(3% + 7 digits) or better
♦ Resistance Range/Accuracy:
0 to 200M⍀/±(0.8% + 10 digits)<2M⍀,
±(5% + 10 digits) or better>2M⍀
♦ Input Impedance: 10M⍀ for all ranges
♦ hFE Measurement Range: 0 to 1000
♦ Display Digit Height: 1.06 in. (27mm)
♦ Operating Temperature: 32° to 104°F
(0° to 40°C) @ <80% relative humidity
♦ Dimensions: 7.5 x 3.5 x 1.3 in. (190 x 88 x 34mm)
♦ Weight: 19.4 oz. (550g) with test leads,
holster and tilt stand
♦ Power Source: 1 “9V” battery (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• All weather test leads
• Rubber Holster • Battery • User’s manual
UPC
NO.
50190 0
DMM51FSG
DMM51FSG
DIGITAL CREDIT CARD STYLE MULTIMETER – DMM333
Ideal for portability. Fits in shirt pocket.
FEATURES:
• 25 ranges
• Large 2000-count LCD
• Data hold + max hold
• Low battery indicator
• Auto power off
SPECIFICATIONS:
♦ AC Voltage Range/Accuracy:
0 to 500V/±(0.8% + 1 digit)
♦ DC Voltage Range/Accuracy:
0 to 500V/±(0.5% + 5 digits)
♦ AC/DC Current Range/Accuracy:
0 to 200mA/±(1.8% + 5 digits)
♦ Resistance Range/Accuracy: 0 to 20M⍀/±
(0.8% + 5 digits)<1M⍀, ±(2% + 5 digits)>1M⍀
♦ Input Impedance (in DCV mode): 10M⍀
♦ Operating Temperature: 32° to 140°F
(0° to 60°C) @ <75% relative humidity
♦ Dimensions: 4.5 x 2.3 x 0.5 in. (115 x 58 x 12mm)
♦ Weight: 3 oz. (84g)
♦ Power Source: 2 “LR44” batteries (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Test leads • Batteries • User’s manual
UPC
NO.
50105 4
DMM333
DMM333
General Tools & Instruments
43
ELECTRICAL
Electrical Circuit Testing
AC CIRCUIT BREAKER FINDER – BF10
Ideal for quickly identifying individual branch circuits and wiring faults without
interrupting power. Includes receptacle tester with auto sense feature.
SIDE VIEW
BF10
RECEIVER
FEATURES:
• Fully automatic operation turns two-man jobs
into one-man jobs
• Locates the breaker associated with any 110V
outlet without tripping the breaker
• Local socket test
• Identifies any outlet wiring faults
• Designed To Safety Standard IEC 61010-1:
CAT II 600V, CAT III 300V
• Built-in flashlight for use in dark areas
• Compatible with GFCI receptacles
• Audible and visual (LED) indications
• Low battery warning
• Wiring Fault Indications: Correct Wiring, Missing
Earth, Missing Neutral, Live & Earth Reversed,
Live & Neutral Reversed, Open Circuit
• CE approved
TRANSMITTER/SOCKET TESTER
SPECIFICATIONS:
♦ Dimensions:
Transmitter: 2.8 x 2.5 x 2.3 in. (71 x 64 x 58mm)
Receiver: 7.4 x 1.8 x 1.5 in. (188 x 46 x 38mm)
♦ Weight: Transmitter: 2.1 oz. (60g)
Receiver: 4.3 oz. (122g)
♦ Power Source: 1 “9V” battery (not included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Carrying Case
• Operating Instructions
UPC
NO.
01565 0
BF10
FINDING A BREAKER ASSOCIATED
WITH AN OUTLET IS AS EASY
AS WAVING A WAND
TRANSMITTER DOUBLES AS A SOCKET TESTER
AC CIRCUIT ANALYZER – CA10
Ideal for identifying 110/220VAC power circuit and wiring problems that can cause
shocks, sparks, fires, equipment failures and poor equipment performance.
CA10
44
General Tools & Instruments
FEATURES:
• Measures a branch circuit’s line voltage, peak
voltage and neutral-to-ground voltage
• Calculates a circuit’s voltage drop in response to
12A, 15A and 20A loads
• Measures the impedance of hot, neutral and
ground conductors as well as available shortcircuit current (ASCC)
• Identifies wiring configurations and detects
wiring faults and missing ground wires
• Tests the reliability and response time of GFCIs
(ground fault circuit interrupters) and RCDs
(residual current devices)
• Displays True RMS readings of all voltages
except peak voltages
• Works with 2- and 3-phase circuits
• Jumbo LCD with 30-second backlight
• Familiar menu/sub-menu operation
• Data HOLD button and 30-minute auto power off
• Powered by six “AAA” batteries (included)
SPECIFICATIONS:
♦ Line Voltage Measurement Range/Accuracy:
85 to 265VAC/± (1.0%+ 0.2V)
♦ Peak Voltage Measurement Range/Accuracy:
121 to 374VAC/± (1.0%+ 0.2V)
♦ Line Frequency Measurement Range/Accuracy:
45 to 65 Hz/± (1.0%+ 0.2Hz)
♦ Voltage Drop Measurement Range/Accuracy:
0.1 to 99.9%/ ±(2.5%+0.2%)
♦ Load Voltage Measurement Range/Accuracy:
10 to 265V/ ±(2.5%+0.2V)
♦ Neutral-to-Earth Voltage Measurement
Range/Accuracy: 0 to 10VAC/±(2.5%+0.2V)
♦ Hot, Neutral and Ground Line Impedance
Measurement Range/Accuracy:
0 to 3Ω/ ±(2.5%+0.02Ω)
♦ RCD Triggering Time Measurement Range/
Accuracy: 1ms to 6.5 seconds/ ±(1.0% +2ms)
♦ RCD Triggering Current Measurement
Range/Accuracy: 30 to 37mA/ ±(1.0% +0.2mA)
♦ GFCI Triggering Time Measurement
Range/Accuracy: 1ms to 6.5 seconds/
±(1.0% +2ms)
♦ Operating/Storage Temperature: 32° to 122°F
(0° to 50°C) @ <80% RH
♦ Dimensions: 7.6 x 3.1 x 1.5 in. (193 x 78 x 39mm)
♦ Weight (without Batteries): 10.4 oz. (295g)
♦ Power Source: 6 “AAA” batteries (included)
♦ Warranty: 1 year (limited)
INCLUDES:
• 12 AWG, 20 in. (0.5m) Long Test Cable
• 6 “AAA” Batteries • Soft Carrying Case
• User’s Manual
UPC
NO.
01566 7
CA10
ELECTRICAL
Electrical Testers
AUTOMATIC DIGITAL CAPACITOR TESTER – CAP1500
Ideal for checking capacitor ranges.
FEATURES:
• Wide measurement range
• Uses precision dual slope A/D converter
• Alligator clip leads for in-circuit testing
• Fast sampling time
• 3-1/2-digit (1999 count) LCD
• Fuse-protected from overloads
• Low battery indication
SPECIFICATIONS:
♦ Measurement Range: 0 to 20mF over 9 ranges
♦ Measurement Accuracy:
±(0.5% + 1 digit) or better below 20uF;
±(5% +5 digits) or better above 20uF
♦ Sampling Time: 0.4 seconds
♦ Operating Temperature: 32° to 122°F
(0° to 50°C) @ <75% relative humidity
♦ Dimensions: 5.3 x 2.8 x 1.4 in. (135 x 71 x 36mm)
♦ Weight: 7.1 oz. (201g)
♦ Power Source: 1 “9V” battery
(included)
♦ Warranty: 1 year (limited)
INCLUDES:
• Alligator clip test leads
• Soft case
• Battery
• User’s manual
UPC
NO.
50192 4
CAP1500
CAP1500
DIGITAL 3-IN-1 LCD STUD/ VOLTAGE/METAL DETECTOR – MSV350D
Ideal for locating studs, pipes, wires carrying voltage and hidden metal.
FEATURES:
• Uses LCD scanning indicators and buzzer to
indicate direction and position of stud, batten,
metal object or wiring
• Detects/distinguishes between metal
pipes/tubes and hot wires with variable
sensitivity
• Also distinguishes between battens and studs
• Simultaneously detects studs and metal/wiring
• Needs no probe
• Battery charge indicator
• Auto power off
SPECIFICATIONS:
♦ Dimensions:
6.1 x 2.6 x 1.3 in.
(155 x 65 x 32mm)
♦ Weight: 6.5 oz. (185g)
♦ Power Source:
1 “9V” battery
(not included)
♦ Warranty: 1 year
(limited)
INCLUDES:
• User’s manual
MSV350D
3 WIRE TESTER WITH GFCI – GF1302
Ideal for checking wall outlets.
FEATURES:
• Detects faulty wiring in 3-wire receptacles with
ground fault circuit interrupters
• Different combinations of three lights indicate
six different fault types
• Designed for 120VAC circuits
• UL listed
UPC
NO.
51067 4
GF1302
GF1302
BRIGHT RED LED SCREWDRIVER/CONTINUITY TESTER – ST600LED
Ideal for checking for continuity and voltage.
FEATURES:
• Bright red LED indicates hot side and continuity
• Continuity and polarity checks
• Microwave leakage test
• Checks fuses and bulbs
• Drop-resistant to 10 ft.
SPECIFICATIONS:
♦ AC Voltage Test Range: 70 to 250V (contact
method); 70 to 600V (non-contact method)
♦ DC Voltage Test Range: 0 to 250V
♦ Continuity Test Range: 0 to 50MΩ
♦ Polarity Test Range: 1.5 to 36VDC
♦ Microwave Leakage Test: >5mW/cm2
♦ Power Source: 1 “LR44” battery (included)
UPC
NO.
51115 2
ST600LED
ST600LED
General Tools & Instruments
45
ELECTRICAL
Voltage Testers
LINE VOLTAGE TESTER – CT101
Ideal for checking outlet wiring.
FEATURES:
• Easy to use
• Insulated probes
• Handy pocket clip
• UL Listed
SPECIFICATIONS:
♦ AC/DC Voltage Measurement Range: 80 to 500V
♦ Maximum Current: 0.3A
♦ ASWG: 18
UPC
NO.
51025 4
CT101
CT101
LOW VOLTAGE TESTER – CT102
Ideal for checking doorbell transformers and low voltage relays.
Low Voltage
Test Leads
No. CT102
U P C 51035
ELECTRICAL
Instruments
FEATURES:
• Easy to use
• Insulated boots
• Alligator clips
• Handy pocket clip
SPECIFICATIONS:
♦ AC/DC Voltage Measurement Range: 5 to 50V
♦ Maximum Current: 5A
♦ ASWG: 20
UPC
NO.
51035 3
CT102
CT102
AUDIBLE/VISUAL NON-CONTACT VOLTAGE TESTER, ETL CERTIFIED –
VS3000A
Ideal for safely detecting energized wires and the hot side of AC outlets.
FEATURES:
• Beeper sounds and LED lights when voltage is
detected
• Safe for CAT III 1000V use
• ETL certified and UL approved
• Automatic battery check function
• “Tester left on” reminder
• Pocket clip
VS3000A
46
General Tools & Instruments
SPECIFICATIONS:
♦ Detection Range: 70 to 1000V @ 50/60Hz
♦ Operating Temperature: 32° to 122°F
(0° to 50°C) at <95% RH
♦ Regulatory Compliance:
ETL certified
Conforms to UL 61010-1 and 61010-2-030
Certified to CAN/CSA C22.2 Nos. 61010-1
and 61010-2-030
♦ Dimensions:
6.0 x 0.9 x 0.8 in. (152 x 23 x 20 mm)
♦ Weight (with batteries): 1.7 oz. (55g)
♦ Power Source: 2 “AAA” batteries (included)
UPC
NO.
51000 1
VS3000A
ELECTRICAL
Starter Switch & Test Leads
STARTER SWITCH 16/2, 20 AMP, PUSH BUTTON (UL SWITCH) – SSC6
Quickly hooks up motors/machinery for testing.
FEATURES:
• Red and black heavy duty boots
• Large clips
• Push button start switch
• Replaces any C-6 start switch
SPECIFICATIONS:
♦ Maximum Current: 15A
♦ ASWG: 16/2
♦ Length: 2 ft. (610mm)
♦ Weight: 8.3 oz. (240g)
UPC
NO.
51145 9
SSC6
SSC6
TEST CORD (MALE) – CT600M
Brings power to remote areas without 110V outlet.
FEATURES:
• Red and black heavy duty boots
• Large clips
• 2 wire
Male
Test Cord
SPECIFICATIONS:
♦ Maximum Current: 13A
♦ Maximum Voltage: 125V
♦ ASWG: 16
♦ Length: 6 ft. (1.83m)
♦ Weight: 8 oz. (227g)
UPC
NO.
50601 1
CT600M
No. CT600M
U P C 50601
ELECTRICAL
Instruments
CT600M
TEST CORD (FEMALE) – CT700F
Brings power to remote areas without 110V outlet.
Feale
Test Cord
No. CT700M
FEATURES:
• Red and black heavy duty boots
• Large clips
• 3 wire
• Brings power to remote areas without
110V outlet
SPECIFICATIONS:
♦ Maximum Current: 13A
♦ Maximum Voltage: 125V
♦ ASWG: 16
♦ Length: 2 ft. (610mm)
♦ Weight: 5.7 oz. (163g)
UPC
NO.
51095 7
CT700F
U P C 51095
ELECTRICAL
Instruments
CT700F
MULTI-COLORED TEST LEADS – CT800
Handy set of multiple jumpers.
FEATURES:
• 10 alligator-clip leads: 2 each white, red, black,
yellow and green
SPECIFICATIONS:
♦ Maximum Voltage: 300V
♦ ASWG: 22
♦ Length: 18 in. (457mm)
♦ Weight: 2.9 oz. (82g)
UPC
NO.
51105 3
CT800
CT800
STANDARD TEST LEADS – TL100
Ideal for use as AC jumpers.
FEATURES:
• 3 ft. long
• 1 each Red & Black
SPECIFICATIONS:
♦ Maximum Current: 10A
♦ Maximum Voltage: 300V
♦ ASWG: 16
♦ Length: 3 ft. (914mm)
♦ Weight: 1.9 oz. (54g)
UPC
NO.
51125 1
TL100
TL100
General Tools & Instruments
47
SPECIALTY HAND TOOLS
Tubing Benders & Gages
TUBING BENDERS – S016
• These tools eliminate crimping and collapsing
of copper and other thin wall tubing. Made of
oil hardened and tempered spring steel
• Tubing bender set contains one each of the
sizes listed below, packaged in a display box
• Available in individual sizes
S106
UPC
11009 1
NO.
S106
TUBE SIZE
OUTSIDE DIA.
1/4", 5/16", 3/8",
7/16", 1/2", 5/8"
FLARING TOOL – 151
• High quality tool moderately priced
• Screw yoke slips quickly over bars without
removing heavy-duty wing nuts
• Yoke has a freewheeling 45° plated cone for
faster, smoother flaring and greater strength in
flaring copper, aluminum, brass and thin wall
tubing
• Large heavy-duty hardened feed thread for
durability
• Long sliding T-handle provides maximum
leverage
• Quick opening plated bars for easy insertion
and removal of tubing
• Size individually marked on bars
• Extra long bars to fit in vice, for easier flaring
• Cast iron yoke
UPC
NO.
14008 1
151
3/16", 1/4",
(Standard) 5/16", 3/8",
7/16" 1/2", 5/8"
CAPACITY
151
DRILL GAGE – 13
• General’s drill gages are used to quickly and
conveniently identify drill bit sizes
• Made of heat treated heavy gage steel,
machined and ground to close tolerances
13
• Hole sizes and decimal equivalents are
permanently marked on the face
• 3" x 1-1/8" wide.
UPC
NO.
22006 6
13 Number size drills 61 to 80
WIRE GAGE – 20
• American Standard wire gage 0 to 36
• For gaging non-ferrous wire and metals such as
copper, brass and aluminum
• Decimal equivalents of each size are stamped
on reverse side
• Satin finished, heavy gage hardened and
tempered steel
• 3-1/4" diameter, 3/32" thick
20
UPC
NO.
22036 3
20
SHEET METAL GAGE – 21
• Gage numbers are U.S. Standard 0 to 36
• For gaging uncoated sheet metal, plate iron and
steel
• Decimal equivalents of each size are stamped
on reverse side
• Satin finished, heavy gage steel is hardened
and tempered
• 3-1/4" diameter, 3/32" thick
21
48
General Tools & Instruments
UPC
NO.
22041 7
21
SPECIALTY HAND TOOLS
Tubing Cutters
TUBING CUTTER – 120
• Newly redesigned contoured shape comfort grip
design
• Bearing tool steel cutter wheel
• Wide hardened flared grooved rollers allow cuts
close to a flared end to avoid tube replacement
in existing installations
• Full sized fold out reamer with double
cutting edges
• Cuts copper, aluminum, brass, thin wall tubing
and stainless steel
• Large knob with a covered extra cutter wheel
storage space
UPC
NO.
12003 8
120
12023 6
12027 4
CAPACITY
1/8" to 1-1/8"
(3.18 to 28.58mm)
RW121/2 Replaceable
Cutting Wheel
RW122 Replaceable
Cutting Wheel
120
PIPE AND TUBING CUTTER – 126
• General’s best quality tubing and pipe cutter is
designed to meet the demanding needs of the
professional
• Quick release button to speed use
• Capacity 1/4" – 2-5/8" (6 – 67mm)
• For cutting copper, aluminum, thin wall
tubing, iron and PVC
• Heavy-duty construction for tube or pipe
• Four rollers to accommodate multiple pipe sizes
and prevent spiraling
• Removable machinists reamer to easily deburr
pipe
• Quick open and close mechanism to speed use
• Extra wheel storage available in handle
UPC
NO.
12017 5
126
12023 6
12027 4
Capacity
1/8" – 1-1/8"
Capacity
1/4" – 2-5/8"
CAPACITY
1/8" to 2-5/8"
(6.35 to 66.68mm)
RW121/2 Replaceable
Cutting Wheel
RW122 Replaceable
Cutting Wheel
126
MINI TUBING CUTTER – 129X
• Comfort grip design for easy turning
• Full size bearing tool steel cutter wheel
• Large fluted adjusting knob for greater torque
• Cuts copper, aluminum, brass, thin wall tubing
and stainless steel
• Wide hardened flared grooved rollers allows
true cuts close to flared end tubing to avoid
tube replacement in existing installations
• 1-1/2" swing radius
UPC
NO.
12032 8
129X
12023 6
Capacity
1/8" – 7/8"
CAPACITY
1/8" to 7/8"
(3.18 to 22.23mm)
RW121/2 Replaceable
Cutting Wheel
129X
MICRO TUBING CUTTER – 123R
• Comfort grip design for easy turning
• Full size bearing tool steel cutter wheel
• Large fluted adjusting knob for greater torque
• Cuts copper, aluminum, brass, thin wall tubing
and stainless steel
• Wide hardened flared grooved rollers allows
true cuts close to flared end tubing to avoid
tube replacement in existing installations
Capacity
1/8" – 5/8"
• 1-3/8" swing radius
• Replaceable cutting wheel, RW121/2
UPC
NO.
12009 0
123R
12023 6
Patented
CAPACITY
1/8" to 5/8"
(3mm – 15mm)
RW121/2 Replaceable
Cutting Wheel
123R
E•Z RATCHET TUBING CUTTER – 133
™
• Ratcheting action rotates the cutter around the tube
allowing a standard size cutter to be used in close
quarter applications
• Longer handle requires less effort to rotate cutter
reducing hand fatigue
• Wide hardened flared grooved rollers allow true cuts
close to flared end tubing to avoid tube replacement
in existing installations
• Cuts copper, aluminum, brass, thin wall tubing and
stainless steel
• Spare cutting wheel supplied in handle
• Replaceable cutting wheel: RW121/2
UPC
NO.
13300 7
12023 6
133
5/16" to 1-1/8" (7.94 to 28.58mm)
RW121/2 Replaceable Cutting Wheel
1-1/8"
133
CAPACITY
General Tools & Instruments
49
SPECIALTY HAND TOOLS
Pipe & Hose Cutters
HEAVY-DUTY PIPE AND HOSE CUTTER – 118
Ideal for repeated heavy-duty cutting.
• Cuts hose, PVC, CPVC, polyethylene, PEX and ABS up to 2"
• Ratchet action for easy cutting
• High carbon steel blade provides longer sharpness and
clean cuts
• Aluminum body is lighter and corrosion proof
• Safety locking clasp
♦ Dimensions: 17.00 x 5.13 x 1.63 in.
(431.8 x 130.30 x 41.40mm)
♦ Weight: 39.70 oz. (1125.47g)
118
NO.
01181 7
118
01180 0
LENGTH/(MM)
CAPACITY/(MM)
UPC
up to 2"
(50mm)
118BG Replacement Blade
17"
(425mm)
HOSE AND TUBING CUTTER – 115
Ideal for Cutting flexible rubber, PVC, ABS &
polyethylene tubing.
• Long handles provide added leverage for easy cuts
• Curved holder supports hose for square cuts
• Replaceable steel blade
• Capacities: rubber hose 2", polyethylene
and ABS pipe 1", PVC pipe 1"
♦ Dimensions: 9.50 x 2.13 x 1.00 in.
(241.30 x 54.10 x 25.40mm)
♦ Weight: 4.85 oz. (137.50g)
115
UPC
NO.
CAPACITY/(MM)
LENGTH/(MM)
01150 3
115
9-1/2"
(241mm)
11500 3
115B
1" to 2"
(25mm – 50mm)
Replacement Blade
ONE-HANDED PVC/HOSE CUTTER – 1191
Ideal for cutting PVC, PE, PEX, ABS pipe.
• Professional quality, all-metal construction for greater
durability
• Ratcheting action for easy cutting
• High carbon steel blade provides longer sharpness and
clean cuts
• Handle locks for safety
• Ergonomically designed handle for comfort
♦ Dimensions: 7.63 x 3.38 x 3.38 in.
(193.80 x 85.85 x 85.85mm)
♦ Weight: 8.35 oz. (236.72g)
1191
Patented
UPC
NO.
CAPACITY/(MM)
LENGTH/(MM)
01191 6
1191
up to 1.625"
(40mm)
9.125"
(231mm)
ONE-HANDED PLASTIC PIPE AND HOSE CUTTER – 119
For cutting PVC, CPVC, Polyethylene, PEX and ABS tubing.
• One-handed Operation
• Quick-Blade Reset
• Comes with extra blade
• Ratchet system holds blade in place while
you adjust your grip to increase pressure
• High carbon steel blade maintains sharpness
and resists chipping
119
• Handle locking strap for safe storage
• Exclusive, easy replaceable blade feature
• Ergonomically designed handle for comfort
♦ Dimensions: 9.25 x 3.78 x 1.00 in.
(234.95 x 96.01 x 25.40mm)
♦ Weight: 8.35 oz. (236.72g)
UPC
NO.
31173 3
119
01194 7
50
General Tools & Instruments
CAPACITY/MM
LENGTH/MM
.125" to 1.625" 8.25"
3mm to 40mm (425mm)
119BG Replacement Blade
SPECIALTY HAND TOOLS
Screwdrivers
POCKET 4-IN-1 MINI SCREWDRIVER – 744, 744DB, 744CD
Ideal for technicians, hobbyists and do-it-yourselfers.
• 2 double-ended chrome vanadium blades
• 1/16" and 1/8" slotted tip and #1 and #00
cross-point tip
• Blades are held in carrier handle
• Change blade sizes instantly
• Convenient pocket clip and capped ends
UPC
NO.
LENGTH
74401 2
74400 5
744
744DB
00744 5
744CD
5.125" (130mm)
Counter display with
24 individual pieces
Carded product in counter top
display box 20 pieces
744
4-IN-ONE POCKET SCREWDRIVER – 745DB
Ideal for technicians, hobbyists and do-ityourselfers.
• 2 double-ended chrome vanadium blades
• 1/8" and 5/32" Slotted tip and #0 & #1
cross-point tip
• Blades are held in carrier handle
• Change blade sizes instantly
• Convenient pocket clip and capped ends
• Length is 5-1/4" (133mm)
UPC
NO.
02147 3
745DB Counter Display 24 pieces
(Sold only as a counter display)
745DB
CORDLESS LIGHTED SCREWDRIVER – 502
Precision use for computers, electronics,
and industrial applications.
• Super bright LED light
• 6+ Hours of power
• 100+ RPM
• Includes six precision bits
• Quick change chuck
• Super-torque drive
• Ergonomically designed rubber cushion grip
• Cordless (2 “AAA” alkaline batteries included)
• Overall length with bit: 7.5" (190.50mm)
UPC
NO.
05020 5
502
#0
#1 1/16" 1/8" T5
T6
502
4-IN-ONE LIGHTED SCREWDRIVER – 75108
Perfect for computers, electronics, industial and
residential applications, hobbies and crafts.
• Unique design features two drivers in one handle
• Two super bright LED lights provide
360° tip illumination for greater visibility
• Transparent collar maximizes illumination
• Four double ended blades store in handle
for convenience
• Cordless (3 “LR41” batteries included)
• Overall length with bit: 6.75" (171.45mm)
UPC
NO.
75108 9
75108
75108
#0
#000
1/8"
5/64"
T5
T8
T6
T10
General Tools & Instruments
51
SPECIALTY HAND TOOLS
Digital Fractional Calipers
6" CARBON FIBER
DIGITAL FRACTIONAL CALIPER – 146
146
No. 146 Digital Display
• 6" (153mm) range
• Lightweight, non-marring carbon fiber composite
• Convenient auto-off feature
• Three mode digital display: Decimal inches,
fractional inches and millimeters
• Inside, outside, depth & step measurements
• Accuracy: +/- 0.001", +/- 0.02mm
• Power Source: 1 “LR-44” (1.5V) battery (included)
• Dimensions: 9.38 x 3.00 x 0.63 in.
(238.25 x 76.20 x 16mm)
• Weight: 6.50 ozs (184.27g)
• Warranty: 1 year (limited)
UPC
NO.
01460 3
146
0 - 6" (0 - 153mm)
LR-44 replacement battery
RANGE
3" CARBON FIBER
DIGITAL FRACTIONAL CALIPER – 1433
1433
No. 1433 Digital Display
• 3" (76mm) range
• Lightweight non-marring carbon fiber composite
• Convenient auto-off feature
• Three mode digital display: Decimal inches,
fractional inches and millimeters
• Inside, outside & step measurements
• Accuracy: +/- 0.001", +/- 0.02mm
• Power Source: 1 “LR-44” (1.5V) battery (included)
• Dimensions: 5.50 x 2.06 x 0.75 in.
(139.70 x 52.32 x 19.05mm)
• Weight: 1.0 oz. (28.35g)
• Warranty: 1 year (limited)
UPC
NO.
01433 7
1433 0 - 3" (0 - 76mm)
LR-44 replacement battery
RANGE
DIGITAL FRACTIONAL CALIPERS – 147
147
No. 147 Fractional Display
52
General Tools & Instruments
• Heavy-duty stainless steel construction
• Convenient auto-off feature
• Three mode digital display: Decimal Inches,
Fractional and Metric
• Inside, outside, depth & step measurements
• Power Source: 1 “LR-44” (1.5V) battery (included)
• Dimensions: 9.25 x 3.25 x 0.55 in.
(234.95 x 82.55 x 13.97mm)
• Weight: 6.50 oz. (184.27g)
• Warranty: 1 year (limited)
UPC
NO.
01470 2
147 0 - 6" (0 - 153mm)
LR-44 replacement battery
RANGE
SPECIALTY HAND TOOLS
Magnifiers & Retrieving Tools
LIGHTED MAGNIFIER – 800543
Ideal for hands-free illuminating
magnification.
• Shatter-Resistant lens
• Push On / Push Off Powerful LED light
• Contoured Handle for Handheld Use
• Integrated Stand for Hands-Free Use
• 3X Magnification (6X Inset lens)
• Diameter: 3-1/2" Lens (89mm)
• Dimensions: 8.50 x 3.50 x 0.81 in.
(215.90 x 88.90 x 20.57mm)
• Weight: 5.50 oz. (155.92g)
• Power Source: 2 “AA” batteries (included)
Includes • Protective pouch
UPC
NO.
26001 7
800543
Patented
800543
ULTRATECH™ GLASS MAGNIFIER – 750543
Ideal for working in confined or obstructed spaces.
• Polished optical glass lens with a metal frame
• Versa-Grip™ Handle with non-slip cushion grip
• Round lens is distortion free
• A powerful magnifier for working in confined or
obstructed spaces
• Designed for demanding jobs in laboratory
quality control, inspection and assembly
functions
• Used by engineers, mechanics, inspectors, lab
technicians, toolmakers, instrument assemblers,
jewelers, do-it-yourselfers, hobby and crafts
people
• Lens Diameter: 3.5" (90mm)
• Dimensions:
8.00 x 3.75 x 3.75 in.
(203.20 x 95.25 x 95.25mm)
• Weight: 7.35 oz. (208.37g)
UPC
NO.
DIAMETER
50543 9 750543 3.5"
(88.9mm)
POWER
1.25
FOCAL
LENGTH
8"
(203.20mm)
750543
LIGHTED MECHANICAL PICK-UPS – 70393, 70396, 70399
Patented
Ideal for the retrieving objects from dark recesses.
Let that flashlight sleep! General’s new Lighted
Mechanical PickUp has a powerful white LED that
sheds a bright light on your quarry. Its strong
4-prong steel jaws can capture objects up to
1 in. (52mm) across.
• Push on powerful LED light
• Continued push opens retrieval claw
• Comfortable ergonomically designed
hand controls
• Flexible shaft
• Strong spring steel retrieval claw
• Power Source: 3 “LR41” batteries (included)
UPC
70399 6
26003 1
70393 4
NO.
MM
70393 12" OAL
304.8mm
70396 24" OAL
609.6mm
70399 36" OAL
914.4mm
LR41 replacement battery
70396
70399
Patented
LIGHTED MAGNETIC/MECHANICAL PICKUPS – 70390, 70391
Ideal for the retrieval of ferrous metals from dimly lit areas.
Are most of the objects you drop made of metal?
Then the magnet in our two newest tools should
prove attractive. The pick-ups have the same
form, function and LED as the 70393, 70396 and
70399 above, and add a retractable magnetic
sleeve for retrieving nuts and bolts and other
ferrous-metal parts.
UPC
NO.
MM
70390 3
70391 0
70390 24" OAL
70391 36" OAL
609.6mm
914.4mm
TELESCOPING ALLIGATOR CLIP – 400
70390
• Ideal for use in lighting pilot lights and barbeques.
• Chrome finish to prevent rust
• Convenient pocket-clip
• Diameter: 5/16" (8mm)
UPC
NO.
SIZE
42217 0
400
6.25"
24.5"
(159mm) (622mm)
OVERALL LENGTH
400
General Tools & Instruments
53
SPECIALTY HAND TOOLS
Inspection Mirrors
LIGHTED RECTANGULAR INSPECTION MIRROR – 80560
Ideal for toolmakers, machinists, inspectors and mechanics.
• 2 Extra bright LED lights facilitate the inspection
of hard-to-see and hard-to-reach areas
• Fully polished glass mirror is shatter-resistant
• 2 “CF2032” batteries included
• 360º Swivel double ball joint
• Size: 2" x 3" (50.80 x 76.20mm)
• Length: 12.5" (317.5mm)
extends to 33.5" (850.9mm) overall
80560
UPC
NO.
PKG.
02146 5
80560
Carded
LIGHTED ROUND INSPECTION MIRROR – 80557
80557
Ideal for toolmakers, machinists, inspectors and mechanics.
New round head LED inspection mirror gets into
tight places and its diffused LED bulbs spread
light evenly over the viewing area.
• Size: 1.85" (47mm) diameter
• Length: 12" (304.8mm)
extends to 32" (812.8mm) overall
UPC
NO.
PKG.
80557 7
80557
Carded
METAL INSPECTION “FLAME” MIRRORS – 5561, 5562, 5563
• Includes plastic protective sheath
• Heavy-duty construction
5561
5562
UPC
NO.
SIZE
05531 3
5561
05562 0
5562
05563 7
5563
1.25" x 2"
9.75", extends to 26"
(31.75 x 54.8mm) (247.65mm
extends to 660.40mm)
2" x 3.75"
10.75", extends to 26"
(50.80 x 95.25mm) (273.05mm
extends to 660.40mm)
3.75" dia.
9-3/4", extends to 26"
(95.25mm dia.)
(247.65mm extends to
660.40mm)
5563
OVERALL LENGTH
LONG TELESCOPING INSPECTION MIRROR – 559
• Handle has black cushion grip
• Non-slip grip
• Mirror size: 2" (51mm) diameter
• 36" (914mm) telescoping
UPC
NO.
SIZE
OVERALL LENGTH
05590 3 559 2" Round Extends to 36"
(50.80mm
Round)
Extends to (914.40mm)
559
GLASS INSPECTION MIRRORS – 558, 560
Facilitates inspection of inaccessible workpieces and
machines by toolmakers, assemblers, inspectors and
mechanics.
• Fully polished glass mirrors are enclosed in plated holders which
are attached to knurled handles with ball and socket joints
• No. 560 has a telescoping arm and a vinyl cushion grip handle
560
558
54
General Tools & Instruments
UPC
NO.
SIZE
OVERALL LENGTH
42471 6
558
42473 0
560
1" x 2" oval
(25.40 x 50.8mm)
3.5" x 2"
(88.90 x 50.80mm)
9"
(228.60mm)
11.5", extends to 16"
(292.10 to 406.40mm)
SPECIALTY HAND TOOLS
Inspection Mirrors & Retrieving Tools
UTILITY TELESCOPING INSPECTION MIRRORS – 70555, 70557
Facilitates inspection of inaccessible work pieces and machines by toolmakers,
assemblers, inspectors and mechanics.
• Fully polished mirrors are enclosed in plated
holders which are attached to handles with a
double ball and socket joint
• Double ball and socket joints adjust to any
angle
• No. 70557 has a vinyl cushion grip handle
UPC
NO.
OVERALL
LENGTH
SIZE
22344 9 70555 1.375" dia.
5" extends
to 27.5"
(34.93mm dia) (127mm extends
to 698.50mm)
22347 0 70557 2.25" dia.
9.75" extends
to 14.75"
(57.15mm dia.) (247.65 extends
to 374.65mm)
70557
70555
CORDLESS PRECISION ENGRAVER – 505
• Diamond Tip Bit
• Precision cordless engraving anywhere
● Use on metal, plastic, ceramic or glass surfaces
● Protects all types of valuables
● Uses standard 3/32" engraving bit
• Aluminum body
● 20,000 RPM motor
● 2 “AAA” batteries (included)
UPC
NO.
505
Patented
CAPACITY
02139 4 505
Overall Length: 6.5" (165.10mm)
Width: 0.5" (12.7mm)
ADJUSTABLE DIAL WIRE STRIPPER – 69
Adjustable settings with lock is ideal for repetitive wire stripping.
• Dial the wire size desired for individual or
repetitive stripping without damaging wire
• Spring opening for fast and easy cutting or
stripping
• Dial lock closes stripper to protect hardened
cutting edges
• Vinyl cushion handles
UPC
NO.
WIRE GAGE CAPACITY
41036 8
69
12, 14, 16, 18, 20, 22, 24, 26
69
4-PIECE INTERCHANGEABLE STAINLESS STEEL PROBE SET – 707862
Ideal for probing, cleaning, picking, or marking small work surfaces.
• Set Includes:
• Four heat treated stainless steel point
configurations:
• Straight
• 180º Hook
• 35º Bend
• 90º Bend
• Precision locking screw chuck holds blades
securely in place
• Each blade is 5" long (127mm);
OAL 8.5" (216mm) with handle
• Precision engineered 700 Series Versa-Grip™
handle for maximum performance
UPC
NO.
PKG.
70786 4
707862
Holster/Carded
707862
General Tools & Instruments
55
SPECIALTY HAND TOOLS
Saw Driver
™
SAW/DRIVER
4-IN-1 Cutting and Driving System is ideal for contractors,
journeymen and do-it-yourselfers.
THE QUAD™
14-PIECE SAW/DRIVER SET
14-PIECE SET INCLUDES:
• 2 position quick change locking handle
offers both power and speed.
• A convenient holster holds all 14 pieces.
• A 4-IN-1 cutting and driving system
(1) Jab Saw with straight handle and
special Sheetrock reciprocal blade
(2) Keyhole Saw in the pistol grip handle
position
(3) Power Driver in the pistol grip position
(4) Speed Driver, screw or nut driver with
straight handle
• The keyless Quick-Change locking
chuck accepts both Quick-Change bits
and industry standard reciprocating
saw blades
• Dimensions: 12.50 x 5.50 x 1.25 in.
(317.50 x 139.70 x 31.75mm)
• Weight: 12.60 oz. (357.20g)
• 3 saw blades; drywall,
Metal/PVC, wood,
• 7 insert bits
• 1 hex to square adaptor
• 1 quick change handle
• 1 holster with belt-clip
• 1 bit extender
• Swivel locking chuck holds all
reciprocating blades and speed
shank power bits
• Comfortable handle easily locks
in the straight or pistol grip position
UPC
NO.
86014 9
86014
1/4"
Drive
Phillips
#2
Phillips
#1
Slotted
1/4"
Slotted
3/16"
T20
T15
#1
Recess
Patented
86014
56
General Tools & Instruments
THE KEYLESS QUICK
CHANGE LOCKING
CHUCK ACCEPTS BOTH
QUICK CHANGE POWER
BITS AND STANDARD
RECIPROCATING
SAW BLADES.
HVAC/R INSTRUMENTS, TOOLS & ACCESSORIES
Planograms
HVAC/R ENVIRONMENTAL INSTRUMENTS
Environmental Instruments Planogram (13)
IRT105
DCO1001
PNG2000A
SAM990DW
DT898P
HDT304K
DTP301FC
HT20
AQ150
WA500
IRT207
IRT657
PTH8707
6:1 Pocket Infrared Thermometer
Carbon Monoxide Detector
Combustible Gas Detector
Digital Psychrometer
Digital Indoor/Outdoor Therm w/ Clock
Digital Thermometer
Digital Thermometer
USB RH/Temp Data Logger w/ LCD
Indoor Outdoor Therm w/ Waterproof Probe
Water Leak Alarm
Non-Contact Infrared Thermometer
12:1 Wide Range Infrared Thermometer
Thermo-Hygrometer
DHVACR-1
List
39.99
169.95
49.99
99.99
14.99
18.95
14.95
79.99
18.95
14.99
59.99
59.99
39.99
General Tools & Instruments
57
HVAC/R INSTRUMENTS, TOOLS & ACCESSORIES
Planograms
HVAC/R ELECTRICAL INSTRUMENTS
58
General Tools & Instruments
DHVACR-2
Electrical Instruments Planogram (11)
List
DMM20UL
CAP1500
CT800
ST600LED
DMM45
VS3000A
TL100
DAMP60
DMM51FSG
BF10
DAMP68
19.99
29.99
8.99
4.99
29.95
12.99
5.95
59.99
59.99
39.99
99.99
Digital Multimeter
Digital Capacitor Tester
Multi-Color Jumper leads
Screwdriver/ Continuity Tester
Auto Imaging DMM w/ Back Lite
Audible/ Visual Non-Contact Voltage Tester
Standard Test Leads
Auto Ranging 600A AC Clamp Meter
Digital Service Multimeter
AC Circuit Breaker Finder
Auto Ranging AC/DC True RMS 400A Clamp Meter
HVAC/R INSTRUMENTS, TOOLS & ACCESSORIES
Planograms
HVAC/R SPECIALTY TOOLS
Tools Planogram (14)
500
80557
80560
120
70396
133
70557
69
129X
707862
1191
505
800543
5562
Cordless Precision Screwdriver
Lighted Round Inspection Mirror
Lighted Rectangular Inspection Mirror
Tubing Cutter
Lighted Mechanical Pick Up
E•Z Ratcheting Tubing Cutter ( 1-1/8" O.D.)
Telescoping Mirror (2-1/4" Dia.)
Adjustable Dial Wire Stripper
Mini Tubing Cutter (7/8" O.D.)
4 piece Stainless Steel Probe Set
PVC and Hose Cutter (1-5/8" O.D.)
Cordless Precison Engraver
“LumiLENS” Lighted Magnifier
Metal Flame Inspection Mirror
DHVACR-3
List
29.96
16.96
16.96
12.50
12.44
25.66
5.98
12.28
10.40
13.20
22.68
19.96
19.96
13.60
General Tools & Instruments
59
HVAC/R INSTRUMENTS, TOOLS & ACCESSORIES
Alphanumeric Index
MODEL
No.
UPC
CAT. KEY
PG.
DESCRIPTION
PKG. PKG.
QTY TYPE
LIST
PRICE
TEST & MEASUREMENT INSTRUMENTS
320
†00320 1
321
†22391 3
AC1
10166 7
ACL10
01521 6
ADP05V
01497 4
AM35UL
50005 7
AQ150
22150 1
ASFTKIT
12710 0
BA10
72015 8
BF10
01565 0
CA10
01566 7
CAP1500
50192 4
CDM77232 01311 3
CGD900
01449 3
CIH20DL
01498 1
CM660
01629 9
CM700
01633 6
CT101
51025 4
CT102
51035 3
CT600M
50601 1
CT6235B
42115 4
CT700F
51095 7
CT800
51105 3
DAMP60
01356 4
DAMP68
01369 4
DCFM700 40700 4
DCFM8901 40005 0
DCFM8906 40015 9
DCiS1
01591 9
DCO1001 41655 6
DCS050
01445 5
DCS100
01443 1
DCS200
01372 4
DCS200-05 01494 3
DCS200-09 01482 0
DCS280
01572 8
DCS300
01373 1
DCS350
01582 7
DCS355
01472 1
DCS400
01371 7
DCS400-05 01447 9
DCS400-09 01426 4
DCS600
01514 8
DCS660
01515 5
DCS800
01628 2
DCS1600 01305 2
DCS1600ART 01416 5
DCS1700 01601 5
DCS1800 01297 0
DCS1800-TR 01500 0
DCS1800ART 01417 2
DL8835
46125 9
DM8215
41215 2
DM8252
41216 9
DM8252RS 41220 6
DMM20UL 50121 4
DMM333
50105 4
DMM40
50122 1
DMM45
50123 8
DMM51FSG 50190 0
DMM830HS 50100 9
DPS16
01579 7
DPT301FC 20035 3
DS300RC 01245 1
60
23
23
37 *Z
40 *Z
15 *
43
25
35 Z
29 *
44 *
44
45
28 *
30 *
33 *SO
41 *
41 *
46
46
47
39
47
47
40
40
34 *
34
34
5
*
31
18 *
18 *
19
19 *
19 *
17 *
19
16 *
19 *
19 *
19 *
19 *
5
*
5
*
8
*
11 *
12 *
8
*
10 *
13 *
12 *
26 *
36
36
36
42
43
42 *
42 *
43
43
9
*
23
38
ANALOG POCKET THERMOMETER WITH MAGNIFYING LENS, -40° TO 160°F
ANALOG POCKET THERMOMETER WITH MAGNIFYING LENS, 0° TO 220°F
110VAC TO 9VDC ADAPTER FOR DTH3007SD, HWA4214SD AND PM930SD
15A LINE SPLITTER FOR DAMP60, DAMP68, CM660 & CM700 CLAMP METERS
CAR CHARGER FOR DCS400 AND DCS100 SERIES
ANALOG ECONOMY MULTIMETER, FUSED, UL LISTED
IN/OUT THERMOMETER WITH WATERPROOF PROBE, -58° TO 158°F (-50° TO 70°C)
DOWNLOAD SOFTWARE & CABLE FOR: DT8852; DCFM8906, DCFM8901; WDCFM8912; DM8215, DM8252
“1/2 AA” BATTERY FOR HT10, HT20, HT50
AC CIRCUIT BREAKER FINDER
AC CIRCUIT ANALYZER
DIGITAL WIDE RANGE CAPACITOR TESTER WITH ALLIGATOR LEADS
WALL MOUNT CO2/TEMPERATURE/RH METER-HIGH ACCURACY
INTRINSICALLY SAFE MSHA APPROVED COMBUSTIBLE GAS LEAK DETECTOR
DATA LOGGING HOT WIRE ANEMOMETER WITH CFM/CMM AND 8:1 IR THERMOMETER
AUTO RANGING TRUE RMS AC/DC CLAMP METER 0 TO 600A RANGE, 0.01A RESOLUTION
AUTO RANGING TRUE RMS AC/DC CLAMP METER 0 TO 1000A RANGE, 0.1A RESOLUTION
LINE VOLTAGE TESTER, UL LISTED
LINE VOLTAGE TESTER
2 WIRE LINE VOLT TEST LEADS
CONTACT TACHOMETER
3 WIRE FEMALE TEST LEADS
TEN LOW-VOLTAGE 22AWG ALLIGATOR CLIP LEADS, 18"
AUTO RANGING 600 AMP AC CLAMP METER
AUTO RANGING AC/DC TRUE RMS 400 AMP CLAMP METER
DIGITAL ECONOMY CAIRFLOW METER WITH CFM
DIGITAL TWO-PIECE AIRFLOW METER WITH CFM DISPLAY & RS-232 INTERFACE
DIGITAL ONE PIECE AIRFLOW METER WITH CFM DISPLAY
iBORESCOPE
DIGITAL CO DETECTOR, WITH AUTO ZERO, BACKLIGHT, WRIST STRAP, ALARM & SOFT CASE
THE SEEKER™ 050 USB VIDEO INSPECTION SYSTEM W/ 12MM DIA. 1M LONG PROBE
THE SEEKER™ 100 WIRELESS USB VIDEO INSPECTION SYSTEM W/ WIRELESS TRANSMISSION & STREAMING VIDEO VIA SKYPE
THE SEEKER™ 200 VIDEO INSPECTION SYSTEM W/ 12MM DIA. 1M LONG PROBE, 2.4" SCREEN
THE SEEKER™ 200 VIDEO INSPECTION SYSTEM W/ 5.5MM DIA. 1M LONG PROBE, 2.4" SCREEN
THE SEEKER™ 200 VIDEO INSPECTION SYSTEM W/ 9MM DIA. 1M LONG PROBE, 2.4" SCREEN
RUGGED NON-RECORDING VIDEO INSPECTION SYSTEM
THE SEEKER™ 300 VIDEO INSPECTION SYSTEM W/ 12MM DIA. 1M LONG PROBE, 3.5" SCREEN
RUGGED RECORDING VIDEO INSPECTION SYSTEM
THE SEEKER™ 355 VIDEO INSPECTION SYSTEM W/ 5.5MM DIA. 1M LONG PROBE, 3.5" SCREEN
THE SEEKER™ 400 WIRELESS VIDEO INSPECTION SYSTEM W/ 12MM DIA. 1M LONG PROBE, 3.5" SCREEN
THE SEEKER™ 400 WIRELESS VIDEO INSPECTION SYSTEM W/ 5.5MM DIA. 1M LONG PROBE, 3.5" SCREEN
THE SEEKER™ 400 WIRELESS VIDEO INSPECTION SYSTEM W/ 9MM DIA. 1M LONG PROBE, 3.5" SCREEN
SEASCOPE™600 -WATERPROOF VIDEO INSPECTION SYSTEM
SEASCOPE™660 -WATERPROOF RECORDING VIDEO INSPECTION SYSTEM
RUGGED VGA RECORDING VIDEO BORESCOPE SYSTEM
HIGH-PERFORMANCE RECORDING VIDEO BORESCOPE SYSTEM
HIGH-PERFORMANCE RECORDING VIDEO BORESCOPE SYSTEM WITH ARTICULATING PROBE
THE VIPER 1700 SUPER HIGH-PERFORMANCE VGA RECORDING VIDEO BORESCOPE SYSTEM
HIGH-PERFORMANCE HIGH-PERFORMANCE WIRELESS BORESCOPE SYSTEM
WIRELESS PROBE HANDLE/CONTROLLER FOR THE DCS1800
HIGH-PERFORMANCE RECORDING VIDEO INSPECTION SYSTEM WITH WIRELESS ARTICULATING PROBE
TEMPERATURE/HUMIDITY DATA LOGGER WITH ON/OFF SWITCH & TEMPERATURE PORT
DIGITAL MANOMETER WITH 36" TUBING, 0 TO 15 PSI, +/- PORT, BACK LIGHT & RS232 OUTPUT
DIGITAL HIGH RESOLUTION MANOMETER WITH 36" TUBING; 0 TO 2 PSI, +/- PORT
HI RES MANOMETER WITH 4 RUBBER STOPPERS FOR DUCT SMOKE DETECTORS
DIGITAL UL LISTED MULTIMETER
DIGITAL CREDIT CARD METER WITH CONTINUITY & BARGRAPH
MANUAL RANGING MULTIMETER MULTIMETER WITH BRIGHT SCREEN DISPLAY
AUTO RANGING DIGITAL MULTIMETER WITH BRIGHT SCREEN DISPLAY
DIGITAL MULTIMETER WITH CONTINUITY BEEPER, JUMBO DISPLAY & PROTECTIVE BOOT
DIGITAL “HOT SIDE” LED ECON. MULTIMETER W/ CONT. BEEPER & SINGLE LEAD HOT SIDE
PIPE AND DUCT RECORDING VIDEO BORESCOPE INSPECTION SYSTEM
DIGITAL THERMOMETER -40º TO 302ºF (-40º TO 150ºC)
DIGITAL CHARGING SCALE
General Tools & Instruments
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BL
BL
BX
BX
BX
BL
BX
BX
BX
BL
DB
BX
BX
BX
BX
BL
BL
P
P
P
BX
P
P
BL
BL
CS
CS
CS
CA
BL
BL
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CA
CS
CS
CS
CA
BX
CA
BX
CS
CS
CS
BL
BL
BL
BL
BL
BX
CA
BL
BX
4.99
4.99
19.99
19.99
19.99
15.99
18.95
79.99
9.99
39.99
99.00
29.99
399.00
299.00
499.00
119.00
179.00
2.99
3.99
8.99
99.99
8.99
8.99
59.99
99.99
149.00
199.99
189.00
299.00
169.95
49.99
199.99
149.00
349.00
249.00
175.00
199.00
279.00
299.00
299.00
399.00
349.00
199.00
299.00
449.00
999.00
1999.00
1299.00
1299.00
399.00
2499.00
129.99
189.99
219.99
239.99
19.99
39.99
29.95
39.95
59.99
21.50
2499.00
14.95
219.00
HVAC/R INSTRUMENTS, TOOLS & ACCESSORIES
Alphanumeric Index
MODEL
No.
UPC
CAT. KEY
PG.
PKG. PKG.
QTY TYPE
DESCRIPTION
LIST
PRICE
TEST & MEASUREMENT INSTRUMENTS (CONTINUED)
DT8852
DT898P
DTH03A
DTH3007SD
EMR813
EMR963HG
EP8703
EP8706
EP8709
EP8710
FT80H
FT80R
GF1302
GPK005
GPK015
GPK035
GTi10
GTi20
GTi30
GTi50
H16
HDT304K
HG15
HR33LJ
HR75LJ
HT10
HT20
HT50
HWA4214SD
INT8819
IRT105
IRT207
IRT657
IRT659K
IRTC50
LT2234C
LTH8809DL
MMH800
MSV350D
NGD268
NGD8800
P16PIP
P230-1
P230-1F
P230-1X
P230-2X
P230-3X
P4214SD
P455-1N
P455-2N
P455-3N
P495-1N
P495-2N
P495-3N
P600-2
P600-3
P8706
P8901
P8912
PCT2236B
PCT900
PM003
PM930SD
21012 3
10012 7
11040 9
01461 5
60017 7
60070 2
01632 9
10041 7
01630 5
01631 2
24015 1
24005 2
51067 4
01585 8
41240 4
41230 5
01550 6
01586 5
01551 3
01592 6
01580 3
20005 6
41225 1
15070 2
15070 2
01501 8
01503 2
01504 9
01456 1
46135 8
20196 1
01403 5
01480 6
01598 8
01442 4
42120 8
01309 0
01486 8
01275 8
41537 5
40880 3
01578 0
01386 1
01474 5
01387 8
01390 8
01391 5
01548 3
01466 0
01460 1
01470 7
01423 3
01467 7
01468 4
01596 4
01587 1
10043 1
40006 7
01291 8
42110 9
40900 8
01370 0
01450 9
24
24
29
28
25
25
27
27
27
27
24
24
45
37
37
37
3
3
3
3
13
23
36
27
27
29
29
29
35
26
21
21
21
22
22
39
28
26
45
30
30
9
15
15
15
15
15
35
15
15
15
15
15
15
5
5
27
34
35
38
39
11
37
*
*
*
*
*
*
*
*Z
*Z
*Z
*Z
*
*Z
*Z
*
*
*
Z
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*Z
Z
Z
*
DIGITAL DUAL INPUT THERMOMETER WITH 2 “K” TYPE PROBES
IN & OUTDOOR THERMOMETER W/ JUMBO DISPLAY
JUMBO DISPLAY HUMIDITY AND TEMPERATURE MONITOR
DATA LOGGING THERMO-HYGROMETER W/ EXCEL FORMATTED SD CARD
THREE CHANNEL CAPABLE WIRELESS THERMOMETER W/ REMOTE
WIRELESS THERMO-HYGROMETER WITH REMOTE SENSOR
CALIBRATABLE MULTI-FUNCTION PSYCHROMETER
CALIBRATABLE DIGITAL PSYCHROMETER
CALIBRATABLE MULTI-FUNCTION PSYCHROMETER WITH MIN/MAX, DATA HOLD & WET BULB
CALIBRATABLE MULTI-FUNCTION PSYCHROMETER WITH EXTERNAL TEMPERATURE PROBE
REFRIGERATOR / FREEZER THERMOMETER, HORIZONTAL, -20° TO 80°F
REFRIGERATOR / FREEZER THERMOMETER WITH HANGER, ROUND, -40° TO 80°F
3 WIRE CIRCUIT TESTER WITH GFCI, UL LISTED
ANALOG GAS PRESSURE KIT, 0 TO 5 PSI W/TUBING, FITTING, GAS MANIFOLD, GAS COCK, SQUEEZE BALL, BLOW MOLD CASE
ANALOG GAS PRESSURE KIT, 0 TO 15 INCHES WC W/ TUBING FITTING & BLOW MOLD CASE
ANALOG GAS PRESSURE KIT, 0 TO 35 INCHES WC W/ TUBING FITTING & BLOW MOLD CASE
THERMAL IMAGING CAMERA
THERMAL/ VISUAL IMAGING CAMERA WITH PICTURE-IN-PICTURE
THERMAL/ VISUAL IMAGING CAMERA WITH PICURE-IN-PICTURE, STREAMING VIDEO & VOICE ANNOTATION
THERMAL/ VISUAL IMAGING CAMERA WITH PICURE-IN-PICTURE, STREAMING VIDEO, VOICE ANNOTATION & 384 x 288 PIXEL FPA
HANDHELD RECORDING VIDEO BORESCOPE CONSOLE
DELUXE DIGITAL STEM THERMOMETER -58° to 302°F (-50° to 150°C)
HYDROGAUGE MANOMETER (15")
CALIBRATION SALT MGCL 33% FOR EP8703/06/09/10
CALIBRATION SALT NACL 75% FOR EP8703/06/09/10
USB TEMPERATURE-HUMIDITY DATA LOGGER W/ LED & GPP
USB TEMPERATURE-HUMIDITY DATA LOGGER W/ LCD & GPP
USB TEMPERATURE-HUMIDITY DATA LOGGER W/ LCD & IR THERMOMETER & GPP
HOT WIRE ANEMOMETER-THERMOMETER WITH DATA LOGGING SD CARD
USB INTERFACE KIT FOR DL8835
POCKET IRT, 6:1 D:S RATIO, ADJUSTABLE EMISSIVITY, -22 to 482°F (-30 to 250°F)
THE HEAT SEEKER™ 8:1 MID-RANGE INFRARED THERMOMETER
12:1 WIDE-RANGE INFRARED THERMOMETER
12:1 INFRARED THERMOMETER WITH “K” TYPE THERMOCOUPLE & ADJUSTABLE EMISSIVITY
8:1 ENERGY AUDIT IR THERMOMETER/SCANNER WITH STAR BURST LASER TARGETING
NON-CONTACT LASER TACHOMETER
TEMPERATURE/HUMIDITY MONITOR – DATA LOGGER
PIN/PINLESS MOISTURE METER WITH TEMPERATURE & HUMIDITY
DIGITAL 3-IN-1 LCD STUD/VOLTAGE/METAL DETECTOR
COMBUSTIBLE GAS LEAK DETECTOR WITH WIDE OPERATING RANGE FOR EXTREME WEATHER CONDITIONS
COMBUSTIBLE GAS LEAK DETECTOR
PIPE AND DUCT INSPECTION PROBE AND REEL SET
CLOSE FOCUS 12MM DIAMETER PROBE FOR ALL SEEKER SYSTEMS--1M (3.3 FT.) LONG
FAR FOCUS 12MM DIAMETER PROBE FOR ALL SEEKER SYSTEMS--1M (3.3 FT.) LONG
1M (3.3 FT.) EXTENSION FOR 12MM DIAMETER PROBE
2M (6.6 FT.) EXTENSION FOR 12MM DIAMETER PROBE
3M (9.8 FT.) EXTENSION FOR 12MM DIAMETER PROBE
REPLACEMENT PROBE FOR HWA4214SD
5.5MM DIA. PROBE X 1M LONG FOR DCS100, 200, 300 AND 400 SYSTEMS
5.5MM DIA. PROBE X 2M LONG FOR DCS100, 200, 300 AND 400 SYSTEMS
5.5MM DIA. PROBE X 3M LONG FOR DCS100, 200, 300 AND 400 SYSTEMS
9MM DIA. PROBE X 1M LONG FOR DCS100, 200, 300 AND 400 SYSTEMS
9MM DIA. PROBE X 2M LONG FOR DCS100, 200, 300 AND 400 SYSTEMS
9MM DIA. PROBE X 3M LONG FOR DCS100, 200, 300 AND 400 SYSTEMS
70 IN. LONG, 9.8MM DIA. PROBE FOR SEASCOPE 600 or SEASCOPE 660
105 IN. LONG, 9.8MM DIA. PROBE FOR iBORESCOPE, SEASCOPE 600 or SEASCOPE 660
EXTERNAL TEMPERATURE PROBE FOR EP8706
REPLACEMENT VANE FOR DCFM8901
REPLACEMENT VANE FOR WDCFM8912
CONTACT/NON-CONTACT LASER CONTACT TACHOMETER
COMBINATION CONTACT/NON-CONTACT LASER TACHOMETER
SET OF THREE MIRRORED VIEWING TIPS (70°, 90°, 110°) FOR ALL 5.5MM PROBES EXCEPT P16181/2/3HP
DATA LOGGING PRESSURE METER W/ EXCEL FORMATTED SD CARD
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
KEY: * = New Item, XX = Discontinued after supply is depleted, *** = Certified, NCL = Not In Catalog, Z = Not standard discount
PKG. TYPE: P = Poly Bag, BX = Box, BL = Blister, CA = Case, CS = Case with printed sleeve, BB = Blank Box, B = Bulk, C = Carded,
DB = Display Box, PB = Printed Box, SO = Special Order
General Tools & Instruments
CS
BL
BL
CA
BL
BL
BL
BT
BL
BL
BL
BL
BL
DB
DB
DB
CA
CA
CA
CA
CS
BL
P
BX
BX
BL
BL
BL
CA
BX
BL
BL
BL
BL
BL
BX
BX
BL
BL
CS
CS
CA
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BL
BX
BX
BX
BX
119.99
14.99
29.00
399.00
28.85
79.95
49.99
89.99
59.99
69.99
4.89
4.99
9.99
69.99
44.95
44.95
1999.00
2499.00
3799.00
5499.00
499.00
18.95
27.95
39.99
39.99
69.99
79.99
149.99
499.00
69.99
39.99
39.99
59.99
79.99
59.99
89.99
249.95
99.99
34.99
199.99
199.99
2299.00
79.00
79.00
19.95
29.95
39.95
169.00
199.00
249.00
299.00
99.00
129.00
149.00
79.00
89.00
19.99
49.99
99.95
129.99
199.00
168.00
349.00
61
HVAC/R INSTRUMENTS, TOOLS & ACCESSORIES
Alphanumeric Index
MODEL
No.
UPC
CAT. KEY
PG.
DESCRIPTION
PKG. PKG.
QTY TYPE
LIST
PRICE
TEST & MEASUREMENT INSTRUMENTS (CONTINUED)
PNG2000A 41501 6
PS10
01527 8
PS100
01533 9
PS2
01491 2
PS400
01534 6
PS5
01528 5
PS50
01532 2
PT5
01561 2
PT9
01560 5
PT12
01559 9
PT300M
21060 4
PTH8707
01402 8
RCV100
01446 2
REF401
44401 6
RLD380L
40141 5
RLD382P
00382 4
RLD400
01587 2
RS380
01378 6
SAM990DW 10025 7
SDRD1
01502 5
SSC6
51145 9
ST600LED 51115 2
THGR268 60073 3
TL100
51125 1
TPK03
25003 7
TPK05
25005 1
TPK500
25015 0
VS3000A
51000 1
WA500
80140 8
WDCFM8912 01249 9
WDCFM8912/CERT 01300 7
31
37
37
37
37
37
37
15
15
15
23
26
18
38
32
32
31
32
27
35
47
45
25
47
35
35
35
46
38
35
35
*Z, SO
*Z, SO
Z
*Z, SO
*Z, SO
*Z, SO
*
*
*
Z
*Z
*
Z
Z
*
*
THE SEEKER™ PEN STYLE COMBUSTIBLE GAS DETECTOR WITH WRIST STRAP, LED & AUDIBLE ALERT
PRESSURE SENSOR FOR PM930SD 10BAR
PRESSURE SENSOR FOR PM930SD 100 BAR
PRESSURE SENSOR FOR PM930SD 2BAR
PRESSURE SENSOR FOR PM930SD 400BAR
PRESSURE SENSOR FOR PM930SD 5BAR
PRESSURE SENSOR FOR PM930SD 50 BAR
MIRROR, GUIDE BALL AND THREAD PROTECTOR ACCESSORIES FOR 5.5MM DIAMETER PROBE
MIRROR, MAGNET, HOOK AND THREAD PROTECTOR ACCESSORIES FOR 9MM DIAMETER PROBE
MIRROR, MAGNET AND HOOK ACCESSORIES FOR 12MM DIAMETER PROBE
DIGITAL FOLD-IN SERVICE THERMOMETER WITH MIN/MAX, DATA HOLD & STAINLESS STEEL PROBE
THE SEEKER™ THERMO-HYGROMETER PEN REPLACES LAM122
WIRELESS USB RECEIVER COMPATIBLE W/ DCS100 AND DCS400 SERIES
GLYCOL REFRACTOMETER TO MEASURE FREEZING POINT (-60° TO 32°F)
HIGH PERFORMANCE REFRIGERANT LEAK DETECTOR
HIGH PERFORMANCE REFRIGERANT LEAK DETECTOR WITH PUMP
DIGITAL REFRIGERANT LEAK DETECTOR WITH PUMP
REPLACEMENT SENSOR FOR RLD380L & RLD382P
DIGITAL PSYCHROMETER WITH TEMPERATURE, HUMIDITY, DEW POINT & WET BULB
SD CARD READER FOR DTH3007SD, HWA4214SD AND PM930SD
STARTER SWITCH 16/2, 20 AMP, PUSH BUTTON (UL SWITCH)
BRIGHT RED LED SCREWDRIVER/CONTINUITY TESTER, DROP RESISTANT TO 10 FT
WIRELESS TEMPERATURE/HUMIDITY SENSOR FOR EMR963HG
36" TEST LEADS, 16 GAUGE WITH BOOTS
“K” TYPE SURFACE THERMOCOUPLE PROBE WITH EXTENDABLE CORD FOR DTH3007SD & HWA4214SD
“K” TYPE PIERCING PROBE, STAINLESS STEEL WITH EXTENDABLE CORD FOR DTH3007SD & HWA4214SD
“K” TYPE PROBE FOR UP TO 500°F FOR DTH3007SD & HWA4214SD
AUDIBLE/VISUAL NON-CONTACT VOLTAGE TESTER, ETL CERTIFIED & UL APPROVED
WATER ALARM
DIGITAL AIR FLOW METER WITH CFM, BTU, TEMP, HUMIDITY, DP, FPM, MPH, KPH, MPS, KNOTS & WET BULB
N.I.S.T. CERTIFICATE OF CALIBRATION FOR THE WDCFM8912 DIGITAL AIR FLOW METER
KEY: * = New Item, XX = Discontinued after supply is depleted, *** = Certified, NCL = Not In Catalog, Z = Not standard discount
PKG. TYPE: P = Poly Bag, BX = Box, BL = Blister, CA = Case, CS = Case with printed sleeve, BB = Blank Box, B = Bulk, C = Carded,
DB = Display Box, PB = Printed Box, SO = Special Order
62
General Tools & Instruments
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BL
BX
BX
BX
BX
BX
BX
P
P
P
BL
BL
BL
BX
CS
CS
CA
PB
BL
BX
P
BL
BX
P
P
P
P
BL
BL
CS
CS
49.99
299.00
299.00
299.00
299.00
299.00
299.00
7.99
7.99
4.99
29.95
39.99
99.00
99.99
219.00
289.00
399.00
59.95
99.99
14.99
29.99
4.99
49.99
5.95
79.99
49.99
13.95
12.99
14.99
269.95
499.95
HVAC/R INSTRUMENTS & ACCESSORIES
Alphanumeric Index
MODEL
No.
UPC
CAT. KEY
PG.
DESCRIPTION
PKG. PKG.
QTY TYPE
LIST
PRICE
HAND TOOLS
13
20
21
69
115
115B
118
118BG
119
120
119BG
123R
129X
126
133
146
147
151
400
502
505
558
559
560
744
744CD
744DB
745DB
1191
1433
5561
5562
5563
70390
70391
70393
70396
70399
70555
70557
75108
80557
80560
86014
707862
750543
800543
DHVACR-1
DHVACR-2
DHVACR-3
LR-44
RW121/2
RW122
S106
22006 6
22036 3
22041 7
41036 8
01150 3
11500 3
01181 7
01180 0
31173 3
12003 8
01194 7
12009 0
12032 8
12017 5
13300 7
01460 3
01470 2
14008 1
42217 0
05020 5
02139 7
42471 6
05590 3
42473 0
74401 2
00744 6
74400 6
02147 3
01191 6
01433 7
05531 3
05562 0
05563 7
70390 3
70391 0
70399 6
26003 1
70393 4
22344 9
22347 0
75108 9
80557 7
02146 5
86014 9
70786 4
50543 9
26001 7
TBD
TBD
TBD
72125 4
12023 6
12027 4
11009 1
48
48
48
55
50
50
50
50
50
49
50
49
49
49
49
52
52
48
53
51
55
54
54
54
51
51
51
51
50
52
54
54
54
53
53
53
53
53
55
55
51
54
54
56
55
53
53
57
58
59
52
49
49
48
*
*
*
*
*
*
*Z
*Z
*
*
*
*
*
*
*
*
*
*
*
DRILL GAGE, 61 TO 80"
AMERICAN STANDARD WIRE GAGE (ROUND)
U.S. STANDARD SHEET METAL GAGE (ROUND)
ADJUSTABLE DIAL WIRE STRIPPER
HOSE & TUBING CUTTER
REPLACEMENT CUTTING BLADE (ITEM #115)
HEAVY-DUTY PVC PIPE CUTTER-2"
REPLACEMENT CUTTING BLADE (ITEM #118)
ONE-HANDED PLASTIC PIPE AND HOSE CUTTER (1/8" TO 1-5/8")
TUBING CUTTER (1/8” to 1-1/8")
REPLACEMENT BLADE FOR #119
MICRO TUBING CUTTER (5/8")
MINI TUBING CUTTER (7/8")
PIPE AND TUBING CUTTER (2-5/8")
E•Z RATCHETING TUBING CUTTER (1-1/8")
6" DIGITAL FRACTIONAL CALIPER (CARBON FIBER)
6" DIGITAL FRACTIONAL CALIPER
STANDARD FLARING TOOL (3/16" - 5/8")
TELESCOPING ALLIGATOR CLIP
CORDLESS LIGHTED PRECISION SCREWDRIVER
CORDLESS PRECISION ENGRAVER
1" X 2" ADJUSTABLE INSPECTION MIRROR, 6" ARM (9" O/A)
LONG TELESCOPING INSPECTION MIRROR
3-1/2" X 2" INSPECTION MIRROR, 11-1/2" EXTENDABLE ARM
POCKET 4-IN-1 SCREWDRIVER
4-IN-1 POCKET MINI SCREWDRIVER
POCKET 4-IN-1 SCREWDRIVER DISPLAY
4-IN-1 POCKET SCREWDRIVER
PVC & HOSE CUTTER (1-5/8")
3" DIGITAL FRACTIONAL CALIPER (CARBON FIBER)
METAL INSPECTION MIRROR
RECTANGULAR METAL INSPECTION MIRROR
ROUND METAL INSPECTION MIRROR
LIGHTED MAGNETIC/MECHANICAL PICKUPS 24" OAL
LIGHTED MAGNETIC/MECHANICAL PICKUPS 36" OAL
UT LIGHTED MECHANICAL PICK-UP, 12"
UT LIGHTED MECHANICAL PICK-UP, 24"
UT LIGHTED MECHANICAL PICK-UP, 36"
TELESCOPING MIRROR - 1-3/8" DIAMETER
TELESCOPING MIRROR - 2-1/4" DIAMETER
4-IN-ONE LIGHTED SCREWDRIVER
TELESCOPING LIGHTED ROUND INSPECTION MIRROR
TELESCOPING LIGHTED RECTANGULAR INSPECTION MIRROR
THE “QUAD”-SAW/DRIVER
4 PC INTERCHANGEABLE PROBE SET, STAINLESS STEEL
UltraTech™ MAGNIFIER-3.5"
“LumiLens” LIGHTED MAGNIFIER
HVAC/R ENVIRONMENTALINSTRUMENTS (2 EACH OF 13 SKU’S)
HVAC/R ELECTRICAL INSTRUMENTS (2 EACH OF 11 SKU’S)
HVAC/R SPECIALTY TOOLS (3 EACH OF 14 SKU’S)
Replacement Battery
Gold Standard Tubing Cutter Wheels, 2 per card
Gold Standard Iron/PVC Pipe Cutter Wheel
6 STEEL SPRING TUBING BENDERS (1/4" - 5/8")
3
C
18.88
3
C
27.56
3
C
26.42
6
C
12.28
3
C
14.12
3
C
6.78
1
C
39.60
2
C
13.20
2
C
30.54
5
C
12.50
3
C
17.45
5
C
11.22
5
C
10.40
2
C
35.32
2
C
25.66
1
C
29.96
1
C
47.16
3
C
25.26
6
C
6.84
4 BL
34.96
5
C
19.96
5
C
9.66
1 BL
11.38
5
C
12.82
10 C
2.74
20 DB
2.66
24 DB
2.77
24 DB
2.96
3
C
22.98
4 BL
19.96
1 BL
11.50
1 BL
13.60
1 BL
14.65
4 BL
19.96
4 BL
23.96
4 BL
11.40
4 BL
12.44
4 BL
13.48
5
C
6.44
5
C
5.98
4 BL
14.96
4 BL
16.96
4 BL
16.96
6
C
24.22
3
C
13.20
1
C
14.66
4 BL
19.96
1 BX 1325.40
1 BX 785.62
1 BX 698.52
1
C
2.92
10 cards C
4.96
6
C
7.76
1 set PB
13.22
General Tools & Instruments
63
80 White Street, New York, NY 10013-3567
PHONE (212) 431-6100 FAX (212) 431-6499 TOLL FREE (800) 697-8665
e-mail: [email protected]
www.generaltools.com
Catalog No. HVACR13
©2013 GENERAL TOOLS & INSTRUMENTS
Not responsible for typographical errors
Printed in USA 4/13 2.5m
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement