Ladibug 2.0 Visual Presenter Image Software User Manual

Ladibug 2.0 Visual Presenter Image Software User Manual
LadibugTM 2.0
Visual Presenter Image Software
User Manual - English
Table of Contents
1. Introduction .......................................................................................................... 2
2. System Requirements .......................................................................................... 2
3. Install Ladibug™ ................................................................................................... 3
4. Connection to the Hardware ................................................................................. 5
5. Start to Use Ladibug™ ......................................................................................... 5
6. Operation Interface Description ............................................................................ 6
6.1 Software screen introduction .............................................................................................. 6
6.2 Thumbnail (Saved image window) ..................................................................................... 7
6.3 Main menu.......................................................................................................................... 8
6.4 Annotation Tools ................................................................................................................. 9
6.5 Camera Settings ............................................................................................................... 11
6.6 Options ............................................................................................................................. 12
6.7 Time Lapse (Burst Settings) ............................................................................................. 13
7. Function Descriptions ......................................................................................... 14
7.1 Turn on/off the Visual Presenter ....................................................................................... 14
7.2 I would like to display a live image ................................................................................... 14
7.3 I would like to capture images .......................................................................................... 14
7.4 I would like to capture images continuously ..................................................................... 14
7.5 I would like to freeze the live image .................................................................................. 14
7.6 I would like to annotate the displayed image .................................................................... 15
7.7 I would like to add textual annotation to images ............................................................... 16
7.8 I would like to adjust the drawing object ........................................................................... 17
7.9 I would like to record videos ............................................................................................. 17
7.10 I would like to use the mask mode ................................................................................... 17
7.11 I would like to use the spotlight mode ............................................................................... 18
7.12 I would like to manage saved image files ......................................................................... 18
8. Troubleshooting .................................................................................................. 19
1
1. Introduction
After installing the Ladibug™ application, you can use the software to:

Control the Visual Presenter.

Capture and record images.

Annotate the image, highlight important details and save it.

Support the full screen function.
2. System Requirements
Windows XP






Min CPU: Intel Core 2 Duo 2GHz and above
Min Memory: 1GB RAM
Supporting Direct X 9
Min Screen Resolution: 1024 x 768
Min Hard Drive Space: 1GB
Windows XP SP2 and above
Windows Vista / 7 / 8





Min CPU: Intel Core 2 Duo 2GHz and above
Min Memory: 1 GB (32-bits)/2 GB (64-bits) RAM
Supporting Direct X 9 (with WDDM 1.0 or higher)
Min Resolution: 1024 x 768
Min Hard Drive Space: 1GB
2
3. Install Ladibug™
1. Please download Ladibug software at Lumens website.
2. Extract the file downloaded and then click [Ladibug] to install.
3. The installation wizard will guide you through the process. Please follow the on-screen
instructions and press [Next] for the next step.
3
4. Press [Yes] to create Ladibug™ shortcut on your desktop.
No
Yes
5. Once the installation is completed, press [Finish] to restart the computer.
4
4. Connection to the Hardware
<Very Important> To ensure successful installation, please follow each of the
following steps.
4.1. Connect the power cord of the Visual Presenter.
AC Outlet
<Note> Appearance may vary depending on country/region.
4.2. Connect USB cable to the Visual Presenter and your computer.
5. Start to Use Ladibug™
5.1. Double-click the [Ladibug] icon on the desktop to launch Ladibug™.
5.2. Click [POWER] icon to power on.
5.3. Click [PREVIEW] icon to start to use.
5
6. Operation Interface Description
6.1 Software screen
introduction




1. Live image
2. Main menu
3. Thumbnail window
4. File management function menu
6
6.2 Thumbnail (Saved image window)


1.
OFF/ON Thumbnail
2.
Thumbnail image of saved video or captured
image (It will be displayed as
video)
if it is a
3.
Save the image/video which has been edited
4.
Save as a new file
5.
Change the storage folder
6.
Delete a file
7.
Send the captured image by E-mail





7
6.3 Main menu
POWER:
Turn on/off the Visual Presenter.
LAMP:
Turn on/off the lamp.
AUTO TUNE:
PREVIEW:
Display live images.
Automatically adjust the image to
have the best brightness and
focusing performance.
OPTIONS:
Select video compression method
and the audio source. Please refer to
6.6 Options for the setting screen.
MAIN:
BRIGHTNESS:
Adjust the brightness of the image.
ZOOM:
Increase or decrease the image size.
Launch the main functions menu.
Right click on this icon to show
information about the Ladibug™.
Mask Mode:
Open the mask mode. Please refer to
7.10 I would like to use the mask
mode.
CAMERA SETTING:
Launch the Camera Settings window
to adjust live images. Please refer to
6.5 Camera Settings for the setting
screen.
FREEZE:
Freeze the live image.
ANNOTATION:
Open annotation tools. Please refer
to 6.4 Annotation.
Spotlight Mode:
Open the spotlight mode. Please
refer to 7.11 I would like to use the
spotlight mode.
TIME LAPSE CAPTURE:
Use the burst mode and adjust the
interval of automatic image capturing.
Please refer to 7.4 I would like to
capture images continuously.
RECORD:
Record the video.
CAPTURE:
Capture the image.
8
6.4 Annotation Tools
Icon

Click
to open
annotation tools.
Description
Pointer tool
Laser tool
Insert text
Eraser
(Clear marks of free-hand
drawing tool)
Draw a line
Draw an ellipse
Draw a rectangle
Delete
Free-hand drawing tool
Back
Next
Clear all
Select the pen color
Select the line width
Select the transparency
Select the font
Select the font size
9

Click the inverted triangle symbol on the drawing object
Duplicate: Make a duplicate copy of the drawing object
Cut: Cut the drawing object
Copy: Copy the drawing object
Paste: Paste the drawing object
Delete: Delete the drawing object
Bring to Front: Bring the drawing object to the front
Send to Back: Bring the drawing object to the back
Bring Forward: Bring the drawing object forward
Send Backward: Bring the drawing object backward

Right-click on a blank area of the screen
Paste: Paste the drawing object
Select All: Select all the drawing objects
Clear All: Clear all the drawing objects
10
6.5 Camera Settings
Control the live image via the Camera Settings interface. The operating procedure is the
same as the control panel and remote control of the Visual Presenter. Refer to the Visual
Presenter user manual for more information.
<Remark> The display of the button may vary depending on product functions.
An inactive button will grey out.
6.5.1 Click
to open Camera Settings interface.
6.5.2 Applicable to other types except DC120 and DC125, such as DC266, DC190….

Case 1

Case 2
11
6.6 Options
Click
to open Options Menu.
1. Factory Reset: Activate the factory reset.
2. Language: Set the language.
3. Video Compression Type: Set the recording format.
<Note> You need to enable the [Enable Video Compress] before setting in Windows OS.
4. Enable Audio Recorder: Enable the audio record device and set the audio source.
5. Software Mode:
Normal mode: All functions are available.
Live mode: Better performance without the functions of annotation, spotlight and mask.
12
6.7 Time Lapse (Burst Settings)
Click
to open Time Lapse menu.



1. Specify a file name.
2. Set the start time.
3. Set the capture interval and the capture time.
13
7. Function Descriptions
7.1 Turn on/off the Visual Presenter

Click
to turn on/off the power.
<Note> When the machine is turned on, the light will flash. After shutdown, you
cannot restart it before the light finishes flashing.
7.2 I would like to display a live image

Click
to display the live image.
7.3 I would like to capture images

Click
to capture images.
[Note] The captured images will be displayed in the Thumbnail area.
7.4 I would like to capture images continuously

Click
to open burst mode setting. Click [OK] after setting.
<Note> Refer to 6.7 Time Lapse for more information about Time Lapse setting.
<Note> The captured images will be displayed in the Thumbnail area.
7.5 I would like to freeze the live image

Click
to freeze the live image of Ladibug™.

Click
once again to lift the freeze.
14
7.6 I would like to annotate the displayed image
<Note> To annotate the saved image, please open the pictures of the Thumbnail area.

Click
to open the annotation tools.

Select a annotation tool.

Select the pen color.

Select the line width.

Select the transparency.

Mark or annotate the displayed image.
<Remark> You can click
to capture images if they are live images. You can click
[SAVE] or [SAVE AS] to save the files if they are image files opened from the Thumbnail.
<Remark> You can add annotation when recording but cannot save it.
15
7.7 I would like to add textual annotation to images

Click
to open the annotation tools.

Select

Click the screen to display the [Text Tool] window.

Enter text in the blank area and press [OK].

Click the object and select the color of text.

Click the object and select the transparency.
.
16

Click the object and select the font and font size.
<Remark> You can click
to capture images if they are live images. You can click
[SAVE] or [SAVE AS] to save files if they are image files.
7.8 I would like to adjust the drawing object

Rotate the direction of the object: Click the object and move it to
the green point on the screen. Press and hold the left mouse
button, and move to left and right to rotate the object.

Change the size of the object: Click the object and move it to the
white point on the screen. Press and hold the left mouse button to
adjust the size of the object.

Click the object, and click the “inverted triangle” icon on the top right of the object or
right-click on the object to open the operation menu. Please refer to 6.4 Annotation for
more information about the menu.
7.9 I would like to record videos

Click
to open the recording tool.
<Note> Click
to open the setting window of video format and audio source.
Please refer to 6.6 Options for more information.

Click
to start recording.

Click
to stop recording.

Click
to close the recording tool.
<Remark> You can add annotation when recording but cannot save it.
7.10 I would like to use the mask mode

Click
to open the mask mode.

You can use the mouse to directly modify the length and the width of the block.
17

Click
to modify the transparency of the block.

Click
to close the mask mode.
7.11 I would like to use the spotlight mode

Click
to open spotlight mode.

You can use the mouse to directly modify the length and the width of the block.

Click
to modify the transparency of the block.

Click
to close the spotlight mode.
7.12 I would like to manage saved image files
7.12.1 Save as a new file
 First, click the picture in the “Thumbnail” window on the left
side of the screen.
 Click [Save as]
to display the “Save image” window.
 Enter the “file name” and click [Save] to finish saving.
7.12.2 Change the location of file access
 Click [Directory]
to display the “Browse Folder”
window.
 After selecting the location of the folder, click [Confirm] to
change the folder where the pictures will be saved next time.
7.12.3 Delete a file
 First, click the picture in the “Thumbnail” window on the left
side of the screen.
 Click [Delete]
to delete the file.
7.12.4 Send out the files by E-mail
 First, click the picture in the “Thumbnail” window on the left side of the screen.
 Click [E-mail]
to open a new E-mail.
18
8. Troubleshooting
8.1. Question: Black screen is displayed in live image after Ladibug™ was
re-installed
Solution:
1. Remove the Ladibug™, and then restart the computer.
2. Re-install the Ladibug™.
8.2. Question: When the Ladibug™ is run, no image is displayed and a Ladibug
error message occurs:
“System video limitation reached. Please refer to the troubleshooting section
of the Ladibug user’s manual.”
Solution:
1. Please check if you are using an extended desktop (two monitors) hooked up to the
computer. If so, please try to move the Ladibug™ shortcut to the extended desktop (the
second monitor) and launch it; Skip to step 5 if you are not using an extended desktop.
2. If step 1 still does not work, please turn off extended desktop.
3. If step 2 still does not work, please reduce the resolution of the screen.
4. If step 3 still does not work, please re-install Ladibug™ software.
5. Download the dll zip file (mfc71.dll / msvcr71.dll is included) from Lumens website:
http://www.Mylumens.com/goto.htm. Then unzip the downloaded file to the folder of
“Program Files / Ladibug “, and restart the LadibugTM.
8.3. Question: Screen flicker occurs during the use of Ladibug™ through
connection to DC-A11
Solution:
1. Please change the setting of antivirus software. Do not use Ladibug™ until firewall has
been disabled.
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement