Ethernet - Barr-Thorp Electric
THE FULL RANGE FOR
PROCESS
AUTOMATION
www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Ethernet
TURCK
Process Automation – Networks
Ethernet I/O Selection Guide
BL67 Gateway
AS-i Gateway
F5 - F8
F9 - F16
Ethernet 8-wire Selection Guide
F1
Cables
Switches
Conduit Adapters
F17 - F22
F23 - F24
F25
Cabinet Adapters
Receptacles
F26
F27- F30
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet 4-wire Selection Guide
Cables
Switches
Conduit Adapters
F31 - F35
F37 - F42
F43
Wall Plate Adapter
Cabinet Adapters
Receptacles
F44
F45
F46
Field Wireables
RJ11 Cordset
F47 - F48
F49
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F2
Ethernet
TURCK
Process Automation – Networks
Ethernet System Description
Ethernet is the most popular protocol used to connect office computers and peripherals today. It is increasingly finding its
way into other applications, and is rapidly becoming the network of choice for higher level industrial control applications.
Ethernet is primarily used to connect PLCs, computers, HMI displays and other high level components.
The term “Ethernet” actually refers to the lower level communication structure. Various different versions, or
implementations, of Ethernet are available, such as Ethernet/IP™ and Modbus-TCP. It is important to note that while all of
these different specifications use the same physical communication method and can operate on the same cable
simultaneously, they cannot necessarily communicate with each other. For example, Modbus-TCP devices cannot
communicate with Ethernet/IP devices. This is because the messages and communication protocol have been defined
differently for these systems, even though the physical electrical structure is the same. Think of it as two people who speak
different languages; they speak by moving air with their mouths, but the rules of the languages are different.
TURCK’s BL67 Ethernet gateways provide a convenient way to connect industrial I/O devices directly to the Ethernet
system, expediting monitoring and troubleshooting for the overall control scheme.
Typical System Configuration
E
Transition Connector
BIC-84-E424
(Not Shown)
A
RSM RKM 50-1M
C
C
D
B
Basic Parts List
A typical Ethernet system consists of the following parts:
• A - Controller
• B - Switches
• C - Ethernet I/O modules
• D - Ethernet cable
• E - Power supply
Ethernet I/O modules act as clients on a network. A server device is needed to retrieve data from and post data to the
client. This is analogous to an office network, where the client PC on a user’s desk may actively connect with multiple
servers to access information in different areas of the enterprise. TURCK Ethernet stations are designed to be fully
compatible with established Ethernet standards for industrial use.
F3
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Cordsets
TURCK offers a complete line of molded Ethernet cordsets to facilitate network installation, resulting in a faster start-up and
fewer wiring errors. Cables are available with stranded or solid-core conductors, with or without shielding.
Most TURCK Ethernet equipment uses the 4 or 8-pin (M12) eurofast ® connector specifications. These connectors provide
a tough, rugged seal, and are IP 67 rated. In some cases (mainly in the control cabinet) a traditional RJ45 Ethernet
connector needs to be used. TURCK provides RJ45 cordsets, as well as a variety of devices made to convert between RJ45
and eurofast connectors.
TURCK cordsets for the Ethernet system are available in standard lengths. Please contact your local sales representative to
order custom lengths.
Addressing
Industrial Ethernet stations use the IP addressing scheme. An address defined by this scheme consists of four byte values
usually displayed in decimal form, for example, 192.168.1.254. Different classifications of networks require different
portions of this address to be constant for all devices on the network (referred to as a “subnet”). This means that the
number of stations allowed on a particular network varies depending on what class of subnet is being used. If the first three
bytes of the IP address are constant (which is common), then the remaining byte may be addressed between 2 and 254,
resulting in 253 possible addresses.
Maximum Ratings
Ethernet allows different maximum cable lengths depending on the type of cable being used. Normally an Ethernet
segment may be as long as 100 m, where 90 m must be solid core cable and the remaining 10 m can be stranded patch
cords.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F4
TURCK
Process Automation – Networks
Ethernet
Ethernet BL67 Stations
TURCK's BL67 is a modular, user configurable network I/O system designed to allow installation of nodes containing
different types and sizes of I/O depending on the users needs for a particular area. Featuring IP 67 protection and metal
threaded connectors, the BL67 can often be mounted directly on a machine without the need to plan or purchase a
separate enclosure for the I/O. This saves planning and installation time, as well as the cost of the enclosure itself.
The BL67 system supports several different network protocols, including Ethernet/IP™ and Modbus-TCP. A BL67 station
consists of a gateway module that interfaces to the Ethernet system, and several I/O modules that interface with the physical
I/O in the field. Different connector options are available to allow a greater level of customization to the user.
For more details on the BL67 system please see section G of this catalog.
F5
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
ModBus TCP/IP
Ethernet Gateways
• Modular I/O
• IP 67 Protection
• Fieldbus Independent Configuration
• Various I/O Styles
Electrical
•
•
•
•
Operating Current: <600 mA from VMB
Input Supply Current: <4 A (from VI)
Output Supply Current: <8 A (from VO)
Backplane Current: <1.5 A (from VMB)
Mechanical
• Operating Temperature: -12 to +55°C (-13 to +131°F)
• Protection: IP 67
• Vibration: 5 g @ 10-500 Hz
Material
Gateway:
BL67-GW-EN
Progammable Gateway:
BL67-PG-EN
• Housing: PC-V0 (Lexan)
Diagnostics (Logical)
• Diagnostic information available through the system I/O map
Diagnostics (Physical)
• LEDs to indicate status of Network and Module Bus communication
Ethernet Pinout
Female
1 = TD+
2 = RD+
3 = TD4 = RD4-Pin
5-pin minifast ® Power Pinout
Male
1 = Gnd
2 = Gnd
3 = PE
4 = VI
5 = VO
4-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F6
Ethernet
TURCK
Process Automation – Networks
Ethernet IP
Ethernet Gateways
• Modular I/O
• IP 67 Protection
• Fieldbus Independent Configuration
• Various I/O Styles
Electrical
•
•
•
•
Operating Current: <600 mA from VMB
Input Supply Current: <4 A (from VI)
Output Supply Current: <8 A (from VO)
Backplane Current: <1.5 A (from VMB)
Mechanical
• Operating Temperature: -12 to +55°C (-13 to +131°F)
• Protection: IP 67
• Vibration: 5 g @ 10-500 Hz
Material
Gateway:
BL67-GW-EN-IP
Programmable Gateway
BL67-PG-EN-IP
• Housing: PC-V0 (Lexan)
Diagnostics (Logical)
• Diagnostic information available through the system I/O map
Diagnostics (Physical)
• LEDs to indicate status of Network and Module Bus communication
Ethernet Pinout
Female
1 = TD+
2 = RD+
3 = TD4 = RD4-Pin
5-pin minifast ® Power Pinout
Male
1 = Gnd
2 = Gnd
3 = PE
4 = VI
5 = VO
4-Pin
F7
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Profinet
Ethernet Gateways
• Modular I/O
• IP 67 Protection
• Fieldbus Independent Configuration
• Various I/O Styles
Electrical
•
•
•
•
Operating Current: <600 mA from VMB
Input Supply Current: <4 A (from VI)
Output Supply Current: <8 A (from VO)
Backplane Current: <1.5 A (from VMB)
Mechanical
• Operating Temperature: -12 to +55°C (-13 to +131°F)
• Protection: IP 67
• Vibration: 5 g @ 10-500 Hz
Material
BL67-GW-EN-PN
• Housing: PC-V0 (Lexan)
Diagnostics (Logical)
• Diagnostic information available through the system I/O map
Diagnostics (Physical)
• LEDs to indicate status of Network and Module Bus communication
Ethernet Pinout
Female
1 = TD+
2 = RD+
3 = TD4 = RD4-Pin
5-pin minifast ® Power Pinout
Male
1 = Gnd
2 = Gnd
3 = PE
4 = VI
5 = VO
4-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F8
TURCK
Process Automation – Networks
Ethernet
Ethernet to AS-interface Gateways
AS-I systems can be easily connected to a higher-level network, such as EtherNet/IP™ and Modbus-TCP, through a gateway
master. The gateway acts as a master to the AS-I system(s) and a slave to the Ethernet system, mapping all of the AS-I data
for Ethernet in a single block.
For AS-I specifications and rating details, see section G of this catalog.
Ethernet System
(Gateway is the Slave)
AS-I System
(Gateway is the Master)
F9
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Addressing
Ethernet stations must have an IP address for communication. The address for AS-i/Ethernet gateways may be set via the
on-unit display and push buttons. Please consult the manual for a particular gateway for instruction on the procedure.
Diagnostics
AS-i/Ethernet gateways contain LEDs for diagnosing I/O and communication problems for Ethernet and AS-I. For a detailed
description of the LED states, see the Bihl+Wiedemann AS-i/Ethernet Gateway User Manual available for download from
www.bihl-wiedemann.com.
Power
Most AS-i/Ethernet gateways draw power from the AS-I power supply. The option to use a separate, non-AS-I power supply
is also available. Consult the gateway documentation to ensure the gateway being selected meets the requirements of your
system.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F10
Ethernet
TURCK
Process Automation – Networks
Modbus TCP Gateways in
Stainless Steel
• AS-I v3.0 Supported
• Integrated Ground-Fault Detection
• Graphical Display
• Integrated AS-I Diagnostics
Electrical
• Operating Current:
200 mA from VAS-I (Power Supply A)
200 mA from VAS-i1, 70mA from VAS-i2 (Power Supply A2)
250 mA from VAUX (Power Supply E)
Power Distribution
• From AS-I supply for each network (Power Supply A, A2)
• From external supply (Power Supply E)
Mechanical
ASI-ENG-SS BW1650*
ASI-ENG-SS BW1651*
ASI-ENG-SS BW1652*
ASI-ENG-SS-C1D2 BW1659
ASI-ENG-SS-C1D2 BW1660
ASI-ENG-SS-C1D2 BW1661
* not ETL Listed
• Operating Temperature: 0 to +55°C (+32 to +131°F)
• Protection: IP 20
Material
• Housing: Stainless Steel
Diagnostics (Logical)
• Health of AS-I network is available via Network interface
Diagnostics (Physical)
• LED to indicate status of network and AS-I communication and power supply
RJ45 Ethernet Standard
1 = WH/or (+TX)
2 = OR (-TX)
3 = WH/GN (+RX)
4 = BU
5 = WH/BU
6 = GN (-RX)
7 = WH/BN
8 = BN
F11
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Pro
g
Int ramm
erf
ace ing
Du
pl
Ad icate
dre
De s s
tec
tion
#o
f
Ma AS-I
ste
rs
ion
ers
IV
AS-
Part Number
Pow
er S
tyle
Hig
he
Ne r Lev
two el
rk
Process
Automation
ASI-ENG-SS BW1650
ModbusTCP
A
3.0
1
X
X
ASI-ENG-SS BW1651
ModbusTCP
A2
3.0
2
X
X
ASI-ENG-SS BW1652
ModbusTCP
E
3.0
2
X
X
ASI-ENG-SS-C1D2 BW1659*
ModbusTCP
A
3.0
1
ASI-ENG-SS-C1D2 BW1660*
ModbusTCP
A2
3.0
2
ASI-ENG-SS-C1D2 BW1661*
ModbusTCP
E
3.0
2
* Approved for use in Class 1, Division 2 areas
Input/Output Connectors
A2
A
E
A - Single AS-I network is powered by and AS-I power supply
A2 - Dual AS-I networks are each powered by their own AS-I power supply
E - Dual AS-I networks are both powered by a single 30 VDC supply, decoupled through the gateway
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F12
Ethernet
TURCK
Process Automation – Networks
AS-I Ethernet/IP Gateways in
Stainless Steel
• AS-I v3.0 Supported
• Integrated Ground-Fault Detection
• Graphical Display
• Integrated AS-I Diagnostics
Electrical
• Operating Current:
300 mA from VAS-I (Power Supply A)
200 mA from VAS-i1, 70mA from VAS-i2
(Power Supply A2)
250 mA from VAUX (Power Supply E)
Power Distribution
• From AS-I supply for each network (Power Supply A, A2)
• From external supply (Power Supply E)
Mechanical
• Operating Temperature: 0 to +55°C (+32 to +131°F)
• Protection: IP 20
Material
ASI-EIPG-SS BW1828*
ASI-EIPG-SS BW1829*
ASI-EIPG-SS BW1833*
ASI-EIPG-SS-C1D2 BW1834
ASI-EIPG-SS-C1D2 BW1835
ASI-EIPG-SS-C1D2 BW1836
• Housing: Stainless Steel
Diagnostics (Logical)
• Health of AS-I network is available via Network interface
Diagnostics (Physical)
• LED to indicate status of network and AS-I communication and power supply
* not ETL listed
RJ45 Ethernet Standard
1 = WH/or (+TX)
2 = OR (-TX)
3 = WH/GN (+RX)
4 = BU
5 = WH/BU
6 = GN (-RX)
7 = WH/BN
8 = BN
F13
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Pro
g
Int ramm
erf
ace ing
Du
pl
Ad icate
dre
De s s
tec
tion
#o
f
Ma AS-I
ste
rs
ion
ers
IV
AS-
Part Number
Pow
er S
tyle
Hig
he
Ne r Lev
two el
rk
Process
Automation
ASI-EIPG-SS BW1828
Ethernet/IP
A
3.0
1
X
X
ASI-EIPG-SS BW1829
Ethernet/IP
A2
3.0
2
X
X
ASI-EIPG-SS BW1833
Ethernet/IP
E
3.0
2
X
X
ASI-EIPG-SS-C1D2 BW1834*
Ethernet/IP
A
3.0
1
ASI-EIPG-SS-C1D2 BW1835*
Ethernet/IP
A2
3.0
2
ASI-EIPG-SS-C1D2 BW1836*
Ethernet/IP
E
3.0
2
* Approved for use in Class 1, Division 2 areas
Input/Output Connectors
A
E
A2
A - Single AS-I network is powered by and AS-I power supply
A2 - Dual AS-I networks are each powered by their own AS-I power supply
E - Dual AS-I networks are both powered by a single 30 VDC supply, decoupled through the gateway
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F14
Ethernet
TURCK
Process Automation – Networks
AS-I ProfiNET Gateways in
Stainless Steel
• AS-I v3.0 Supported
• Integrated Ground-Fault Detection
• Graphical Display
• Integrated AS-I Diagnostics
Electrical
• Operating Current:
300 mA from VAS-I (Power Supply A)
Power Distribution
• From AS-I supply
Mechanical
• Operating Temperature: 0 to +55°C (+32 to +131°F)
• Protection: IP 20
Material
• Housing: Stainless Steel
Diagnostics (Logical)
• Health of AS-I network is available via Network interface
ASI-PNG-SS BW1912
Diagnostics (Physical)
• LED to indicate status of network and AS-I communication and power supply
RJ45 Ethernet Standard
1 = WH/or (+TX)
2 = OR (-TX)
3 = WH/GN (+RX)
4 = BU
5 = WH/BU
6 = GN (-RX)
7 = WH/BN
8 = BN
F15
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
ASI-PNG-SS BW1912
PROFINET
A
3.0
1
X
Pro
g
Int ramm
erf
ace ing
Du
pl
Ad icate
dre
De s s
tec
tion
#o
f
Ma AS-I
ste
rs
ion
AS-
IV
ers
Pow
er S
tyle
Part Number
Hig
he
Ne r Lev
two el
rk
Process
Automation
X
Input/Output Connectors
A
A - Single AS-I network is powered by and AS-I power supply
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F16
Ethernet
TURCK
Process Automation – Networks
Ethernet, Cable Specifications, 8-wire
• Cable that Meets the Requirements of TIA/EIA568-B.2
Category 5e Cable for 10 and 100 Base-T Ethernet
• Cable is UL Rated for Sunlight and Oil Resistant
Inner Jacket
Brown
Brown/White
Blue
Blue/White
Orange
Orange/White
Green
Green/White
Jacket
Figure A
Shield
Jacket
Brown
Brown/White
Blue
Blue/White
Orange
Orange/White
Green
Green/White
Figure B
Inner Jacket
Maximum 100 meters of cable of which:
Aluminum Armor
• 90 meters Horizontal Cable (SOLID - 842 or 843)
• 2 x 5 meters Patch Cables (STRANDED - 840 or 841)
• Direct Connect 30 M STRANDED
Data Pair
Type
840
75°C 300 Volts
841
75°C 300 Volts
842
75°C 100 Volts
843
75°C 300 Volts
845
50°C 125 Volts
849A
AWM 444
80°C 300 Volts
*
†
††
†††
F17
Outer Jacket
Shields
AWG
Color Code
DCR (/1000 feet)
Insulation
Material Color
Nominal O.D.
Type
Bulk Cable
Part Number /
Weight/300 M
Figure
NEC CMR (ETL)
CEC C (ETL)
8/24 AWG
Stranded
28.6 Ohms
PE
PVC Teal
6.5 mm (.256 in)
None
RB50856-*M
39 lbs.
flexlife ® ††
A
NEC CMR (ETL)
CEC C (ETL)
8/24 AWG
Stranded
28.6 Ohms
PE
PVC Teal
7.3 mm (.286 in)
Foil/Braid
RB50893-*M
50 lbs.
flexlife ††
A
NEC CMR (ETL)
CEC C (ETL)
8/24 AWG
Solid
28.6 Ohms
PE
PVC Teal
5.9 mm (.231 in)
None
RB50857-*M
39 lbs.
flexlife †
A
NEC CMR (ETL)
CEC C (ETL)
8/24 AWG
Solid
28.6 Ohms
PE
PVC Teal
7.3 mm (.286 in)
Foil/Braid
RB50894-*M
50 lbs.
flexlife †
A
TSB-36
ISO/IEC 11801
8/26 AWG
Stranded
37.3 Ohms
PE
PUR Teal
6.3 mm (.248 in)
Foil/Braid
RB51305-*M
54 lbs.
flexlife †††
Halogen Free
A
NEC CMG
CEC HL CMG
8/24 AWG
Solid
28.6 Ohms
PO
PVC Black
15.3 mm (.530 in)
Foil/Braid
Armor
RB51100-*M
159 lbs.
armorfast ®
B
Approvals
Indicates length in meters.
Standard cable lengths are 30, 75, 150, 225 and 300 meters.
85 thousand cycles on c-track flexing machine at 1.5" bend radius.
4 million cycles on c-track flexing machine at 1.5" bend radius.
2 million cycles on c-track flexing machine at 1.5" bend radius.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, (M12x1) eurofast ® Cable/Cordset Selection Matrix - Cable Type 840 & 842 Only
Pin (Male)
1
eurofast
Pin (Male)
Socket (Female)
2
3
Socket (Female)
4
RJ45 Plug
7
RSC
RKC
FSFD
FKFD
RJ45
RSC 84x-*M
RKC 84x-*M
FSFD 84x-*M
FKFD 84x-*M
RJ45 84x-*M
RSC RSC 84x-*M
RSC RKC 84x-*M
RSC FSFD 84x-*M
RSC FKFD 84x-*M
RSC RJ45 84x-*M
RKC RKC 84x-*M
RKC FSFD 84x-*M
RKC FKFD 84x-*M
RKC RJ45 84x-*M
RJ45 FSFD 84x-*M
RJ45 FKFD 84x-*M
RJ45 RJ45 84x-*M
eurofast
RJ45 Plug
Socket (Female)
Pin (Male)
Bare
1
RSC
2
RKC
7
RJ45
See pages F20 - F21 for dimensional drawings.
*
x
Indicates length in meters.
Indicates cable type.
Refer to the Cordset Builder at www.turck.com for assistance with cordset/cable combinations.
Standard cable lengths are 0.3, 0.5, 1.0, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0, 8.0, 10, 15....50 meters. Consult factory for other lengths.
For stainless steel coupling nuts change part number RSC … to RSCV, FKFD … to FKFDV.
For cross-over cable, add "CR" to part number RJ45 RJ45 CR 84x-*M.
eurofast
Male
Pinouts
1. White/Blue
2. White/Brown
3. Brown
4. Orange
5. White/Green
6. White/Orange
7. Blue
8. Green
eurofast
Female
Standard Pinout
1. White/Orange
2. Orange
3. White/Green
4. Blue
5. White/Blue
6. Green
7. White/Brown
8. Brown
RJ45 Plug
Male
(CR) Pinout
1. White/Green
2. Green
3. White/Orange
4. Blue
5. White/Blue
6. Orange
7. White/Brown
8. Brown
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F18
Ethernet
TURCK
Process Automation – Networks
Ethernet, (M12x1) eurofast ® Cable/Cordset Selection Matrix - Cable Type 841 & 843 Only
Pin (Male)
1
eurofast
Pin (Male)
Socket (Female)
2
5
Socket (Female)
RJ45 Plug
6
7
RSS
RKS
FSSDE
FKSDE
RJ45S
RSS 84x-*M
RKS 84x-*M
FSSDE 84x-*M
FKSDE 84x-*M
RJ45S 84x-*M
RSS RSS 84x-*M
RSS RKS 84x-*M
RSS FSSDE 84x-*M
RSS FKSDE 84x-*M
RSS RJ45S 84x-*M
RKS RKS 84x-*M
RKSS FSSDE 84x-*M
RKS FKSDE 84-*M
RKS RJ45S 84x-*M
Socket (Female)
RJ45 Plug
eurofast
Pin (Male)
Bare
1
RSS
2
RKS
7
RJ45S FSSDE 84x-*M RJ45S FKSDE 84x-*M RJ45S RJ45S 84x-*M
RJ45S
See pages F20 - F21 for dimensional drawings.
*
x
Indicates length in meters.
Indicates cable type.
Refer to the Cordset Builder at www.turck.com for assistance with cordset/cable combinations.
Standard cable lengths are 0.3, 0.5, 1.0, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0, 8.0, 10, 15....50 meters. Consult factory for other lengths.
For stainless steel coupling nuts change part number RSS … to RSSV, FKSDE … to FKSDEV.
For cross-over cable, add "CR" to part number RJ45S RJ45S CR 84x-*M.
eurofast
Male
F19
Pinouts
1. White/Blue
2. White/Brown
3. Brown
4. Orange
5. White/Green
6. White/Orange
7. Blue
8. Green
eurofast
Female
Standard Pinout
1. White/Orange
2. Orange
3. White/Green
4. Blue
5. White/Blue
6. Green
7. White/Brown
8. Brown
RJ45 Plug
Male
(CR) Pinout
1. White/Green
2. Green
3. White/Orange
4. Blue
5. White/Blue
6. Orange
7. White/Brown
8. Brown
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, eurofast ® Cordset Connector Dimensions / Configuration
Specifications
Housing:
Coupling Nut:
Contact Carrier:
Contacts:
Protection:
Rated Voltage:
Rated Current:
Ambient Temperature:
PUR (Polyurethane)
Nickel Plated CuZn or Stainless Steel
TPU (Polyurethane) or POM (Nylon)
Gold Plated CuZn
NEMA 1, 3, 4, 6P and IEC IP 68
60 V
2A
-40° to +75°C (-22° to +167°F)
1
RSC/RSS ..
2
Pages F18 - F19
RKC/RKS ..
3
FSFD ..
4
Pages F18 - F19
FKFD ..
5
FSSDE ..
Pages F18 - F19
Pages F18 - F19
6
Pages F18 - F19
FKSDE ..
Pages F18 - F19
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F20
Ethernet
TURCK
Process Automation – Networks
Ethernet, RJ45 Connector Dimensions / Configuration
Specifications
Housing:
Protection:
Rated Voltage:
Rated Current:
Ambient Temperature:
Polyolefin
NEMA 1 and IEC IP 20
42 V
1.5 A
-40° to +80°C (-22° to +176°F)
7
RJ45/RJ45S ..
Page F18 - F19
Specifications
Housing:
Coupling Nut:
Contact Carrier:
Contacts:
Protection:
Rated Voltage:
Rated Current:
Ambient Temperature:
RSA ..
F21
PUR (Polyurethane)
Nickel Plated CuZn or Stainless Steel
TPU (Polyurethane) or POM (Nylon)
Gold Plated CuZn
NEMA 1, 3, 4, 6P and IEC IP 68
60 V
2A
-40° to +75°C (-22° to +167°F)
(armorfast ® only)
RKA ..
(armorfast only)
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, Economy RJ45 to RJ45 Cordsets
• For "In the Panel" Applications Where
Industrial Cordsets are not Needed
• Available on Yellow, 3 FT and 7 FT
Lengths Only
Part Number
Application
Pinout
Male
RJ45 RJ45 840-3FT/ECON
•
Ethernet patch cordsets for panel
connections
•
Economy, non industrial
RJ45 RJ45 840-7FT/ECON
RJ45 Plug
Male
Pinout
1. White/Orange
2. Orange
3. White/Green
4. Blue
5. White/Blue
6. Green
7. White/Brown
8. Brown
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F22
Ethernet
TURCK
Process Automation – Networks
Unmanaged Switches
• 5 and 9 Ports Available
• IP 67 Protection
• 10/100 Mbps
• 8-pin Ethernet Connectors
Electrical
• Power Consumption: 2 W (...-E524), 4 W (...-E924)
• Operating Voltage: 10-30 VDC
Mechanical
• Operating Temperature: -30 to +80°C (-22 to +176°F)
• Protection: NEMA 1,3,4,6,13 and IEC IP 67
SE-84X-E524
SE-84X-E924
SE-84X4-E524
SE-84X4-E924
Material
• Housing: Nylon 6 (other materials available on request)
• Connectors: Nickel-plated Brass (other materials available on request)
Diagnostics (Physical)
• LEDs to indicate status of Ethernet communication
A
B
F23
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Inputs
Part Number
Ports*
Ethernet Pinouts
Power Pinout
Dimensions
SE-84X-E524
5
8E
5M
A
SE-84X-E924
9
8E
5M
B
SE-84X4-E524
5
8E
4M
A
SE-84X4-E924
9
8E
4M
B
* Note: One port for each switch is a dedicated uplink port
Port/Power Connectors
8E
5M
4M
8-pin eurofast ®
5-pin minifast ®
Power
4-pin minifast Power
1 = WH/BU
2 = WH/BN
3 = BN
4 = OG (TX-)
5 = WH/GN (RX+)
6 = WH/OG (TX+)
7 = BU
8 = GN (RX-)
1 = NC
2 = V3 = NC
4 = V+
5 = NC
1 = V+
2 = NC
3 = NC
4 = V-
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F24
Ethernet
TURCK
Process Automation – Networks
Ethernet, Conduit Adapters, 8-wire
• Gasket and Mounting Screws Provided
• Same Housing Style for Single or Double
Port
Housing
Part Number
Specs
Application
Pinout
Attaches to standard
conduit body* for
transition to 8-wire
(M12x1) eurofast ®
connector
BCA 84-E124
*Cross Hinds 3/4" Mark 9,
Form 8 or Equivalent.
Female
Nylon Housing
60 V, 2 A
-40° to +75°C
BCA 84-E224
Attaches to standard
conduit body* for
transition to 8-wire
(M12x1) eurofast
connector
*Cross Hinds 3/4" Mark 9,
Form 8 or Equivalent.
F25
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, Cabinet Adapter, 8-wire
• Mounts to any Cabinet for Transition
from (M12x1) eurofast ® 8-Pin
Connectors to RJ45 Connectors
• Gasket and Mounting Hardware Included
(8-32 x 1/2")
Housing
Part Number
Specs
Application
Pinout
Female
BIC 84-E424
Nylon Housing
60 V, 2 A
-40° to +75°C
Attaches to cabinet for
transition to 4-wire (M12x1)
eurofast connector
Panel Dimensions
RJ45 Plug
Pinouts
1. White/Orange (+TX)
2. Orange (-TX)
3. White/Green (+RX)
4. Blue
5. White/Blue
6. Green (-RX)
7. White/Brown
8. Brown
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F26
Ethernet
TURCK
Process Automation – Networks
Ethernet, Circuit Board Connectors and OEM Receptacles, 8-wire
• Provides (M12x1) eurofast ® 8-Pin
Connection to Field Devices
Housing
Part Number
Specs
Application
Pinouts
19
Male eurofast with
mounting kit
FS 84 PCB KIT
Male
21
FS 84 PCB
Male eurofast
Nickel Plated CuZn
or Stainless Steel
250 V, 4 A
-40° to +75°C
20
FK 84 PCB KIT
Female eurofast with
mounting kit
FK 84 PCB
Female eurofast
1.
2.
3.
4.
5.
6.
7.
8.
WH/BU
WH/BN
BN
OG
WH/GN
WH/OG
BU
GN
Female
22
See pages F29 - F30 for dimensional drawings.
Standard housing material is nickel plated brass "FSV .."; "FKV .." indicates 316 stainless steel.
Panel Cutout
FK … FS
F27
Board Layout (reference only)
FK … FS
Panel Cutout
FKFD … FSFD
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, Circuit Board Connectors and OEM Receptacles, 8-wire
• Provides (M12x1) eurofast ® 8-Pin
Connection to Field Devices
Housing
Part Number
Specs
Application
Pinouts
17
Male eurofast PCB
pins
FSFD 84 PCB
15
Male
Male eurofast solder
cups
FSFDL 84
23
WFS 84 PCB
Nickel Plated CuZn
or Stainless Steel
250 V, 4 A
-40° to +75°C
Male eurofast right
angle PCB pins
1.
2.
3.
4.
5.
6.
7.
8.
WH/BU
WH/BN
BN
OG
WH/GN
WH/OG
BU
GN
18
FKFD 84 PCB
Female eurofast PCB
pins
FKFDL 84
Male eurofast solder
cups
Female
16
See pages F29 - F30 for dimensional drawings.
Standard housing material is nickel plated brass "FKFD.."; "FKFDV.." indicates 316 stainless steel.
Panel Cutout
FKFD … FSFD
Board Layout (reference only)
FKFD … FSFD
Panel Cutout
WFS
Board Layout (reference only)
WFS
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F28
Ethernet
TURCK
Process Automation – Networks
eurofast ® PCB Mount Male and Female Receptacles
15
FSFDL ..
16
Page F28
FKFDL ..
17
FSFD .. PCB
18
Page F28
FKFD .. PCB
19
FS .. PCB KIT
F29
Page F28
Page F28
20
Page F27
FK .. PCB KIT
Page F27
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
eurofast ® PCB Mount Male and Female Receptacles
21
FS .. PCB KIT
22
Page F27
FK .. PCB KIT
Page F27
23
WFS .. PCB
Page F28
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F30
Ethernet
TURCK
Process Automation – Networks
Ethernet, Cable Specifications, 4-wire
• Cable that Meets the Requirements of TIA/EIA568-B.2 Category 5e
Performance Requirements Cable for 10 and 100 Base-T Ethernet
• Compliant with Ethernet/IP Standards
• Cable is UL Rated for Sunlight and Oil Resistant
Inner Jacket
Jacket
Green
White/Green
Figure A
Orange
White/Orange
Braided Shield
Inner Jacket
Jacket
Green
White/Green
Figure B
Orange
White/Orange
Aluminum/Poly Foil Shield
Maximum 100 meters of cable of which:
• 90 meters Horizontal Cable (SOLID - 442 or 443)
• 2 x 5 meters Patch Cables (STRANDED - 440 or 441)
Data Pair
Type
Approvals
440
75°C 300 Volts
441
75°C 300 Volts
442
75°C 100 Volts
443
75°C 300 Volts
4410
50°C 124 Volts
*
†
F31
Outer Jacket
Shields
Type
Bulk Cable
Part Number /
Weight/300 M
Figure
AWG
Color Code
DCR (/1000 feet)
Insulation
Material Color
Nominal O.D.
NEC CMR
CEC C(UL) CMR
4/24 AWG
Stranded
28.6 Ohms
PO
PVC Teal
6.9 mm (.270 in)
None
RB51210-*M
29 lbs.
A
NEC CMR
CEC C(UL) CMR
4/24 AWG
Stranded
28.6 Ohms
PO
PVC Teal
7.2 mm (.285 in)
Foil/Braid
RB51211-*M
44 lbs.
B
NEC CMR
CEC C(UL) CMR
4/24 AWG
Solid
28.6 Ohms
PO
PVC Teal
6.4 mm (.250 in)
None
RB51212-*M
27 lbs.
A
NEC CMR
CEC C(UL) CMR
4/24 AWG
Solid
28.6 Ohms
PO
PVC Teal
7.1 mm (.280 in)
Foil/Braid
RB51213-*M
49 lbs.
B
TSB-36
ISO/IEC 11801
4/26 AWG
Stranded
37.3 Ohms
PE
PUR Teal
6.1 mm (.240 in)
Foil/Braid
RB51306-*M
48 lbs.
flexlife ®†
Halogen Free
A
Indicates length in meters.
Standard cable lengths are 30, 75, 150, 225 and 300 meters. Consult factory for other lengths.
2.5 million flex motions at 12.5x cable diameter bend radius.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, (M12x1) eurofast ® Cables and Extensions - Cable Type 440 & 442 D-coded
Pin (Male)
eurofast
Pin (Male)
Socket (Female)
8
9
Socket (Female)
12
13
RJ45 Plug
14
RSCD
RKCD
FSFDD
FKFDD
RJ45
RSCD 44x-*M
RKCD 44x-*M
FSFDD 44x-*M
FKFDD 44x-*M
RJ45 44x-*M
RSCD RSCD 44x-*M
RSCD RKCD 44x-*M
RSCD FSFDD 44x-*M
RSCD FKFDD 44x-*M
RSCD RJ45 44x-*M
RKCD RKCD 44x-*M
RKCD FSFDD 44x-*M
RKCD FKFDD 44x-*M
RKCD RJ45 44x-*M
RJ45 FSFDD 44x-*M
RJ45 FKFDD 44x-*M
RJ45 RJ45 44x-*M
eurofast
RJ45 Plug
Socket (Female)
Pin (Male)
Bare
8
RSCD
9
RKCD
14
RJ45
See pages F34 - F35 for dimensional drawings.
*
x
Indicates length in meters.
Indicates cable type.
Refer to the Cordset Builder at www.turck.com for assistance with cordset/cable combinations.
Standard cable lengths are 0.3, 0.5, 1.0, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0, 8.0, 10, 15....50 meters. Consult factory for other lengths.
For stainless steel coupling nuts change part number RSCD … RSCDV, FSFDED … FSFDEDV.
eurofast
Male
Pinouts
1. White/Orange (+ tx)
2. White/Green (+rx)
3. Orange (-tx)
4. Green (-rx)
eurofast
RJ45 Pinout
Female
1. White/Orange
2. Orange
3. White/Green
4. N/C
5. N/C
6. Green
7. N/C
8. N/C
RJ45 Plug
Male
RJ45 (CR) Pinout
1. White/Green
2. Green
3. White/Orange
4. N/C
5. N/C
6. Orange
7. N/C
8. N/C
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F32
Ethernet
TURCK
Process Automation – Networks
Ethernet, (M12x1) eurofast ® Cables and Extensions - Cable Type 441 & 443 D-coded
Pin (Male)
eurofast
Pin (Male)
Socket (Female)
8
9
10
Socket (Female)
11
RJ45 Plug
14
RSSD
RKSD
FSSDED
FKSDED
RJ45S
RSSD 44x-*M
RKSD 44x-*M
FSSDED 44x-*M
FKSDED 44x-*M
RJ45S 44x-*M
RSSD RSSD 44x-*M
RSSD RKSD 44x-*M
RSSD FSSDED 44x-*M
RSSD FKSDED 44x-*M
RSSD RJ45S 44x-*M
RKSD RKSD 44x-*M
RKSD FSSDED 44x-*M
RKSD FKSDED 44x-*M
RKSD RJ45S 44x-*M
RJ45S FSSDED 44x-*M RJ45S FKSDED 44x-*M
RJ45S RJ45S 44x-*M
Socket (Female)
RJ45 Plug
eurofast
Pin (Male)
Bare
8
RSSD
9
RKSD
14
RJ45S
See pages F34 - F35 for dimensional drawings.
*
x
Indicates length in meters.
Indicates cable type.
Refer to the Cordset Builder at www.turck.com for assistance with cordset/cable combinations.
Standard cable lengths are 0.3, 0.5, 1.0, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0, 8.0, 10, 15....50 meters. Consult factory for other lengths.
For stainless steel coupling nuts change part number RSSD … RSSDV, FSSDED … FSSDEDV.
eurofast
Male
F33
Pinouts
1. White/Orange (+ tx)
2. White/Green (+rx)
3. Orange (-tx)
4. Green (-rx)
eurofast
Female
RJ45 Pinout
1. White/Orange
2. Orange
3. White/Green
4. N/C
5. N/C
6. Green
7. N/C
8. N/C
RJ45 Plug
RJ45 (CR) Pinout
Male
1. White/Green
2. Green
3. White/Orange
4. N/C
5. N/C
6. Orange
7. N/C
8. N/C
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, eurofast ® Cordset Connector Dimensions / Configuration
Specifications
Housing:
Coupling Nut:
Contact Carrier:
Contacts:
Protection:
Rated Voltage:
Rated Current:
Ambient Temperature:
TPU (Polyurethane)
Nickel Plated CuZn or Stainless Steel
TPU (Polyurethane) or POM (Nylon)
Gold Plated CuZn
NEMA 1, 3, 4, 6P and IEC IP 68
250 V
4A
-40° to +75°C (-22° to +167°F)
8
RSCD/RSSD ..
9
Pages F32 - F33
RKCD/RKSD ..
10
FSFDD ..
11
Pages F32 - F33
FKFDD ..
12
FSSDED ..
Pages F32 - F33
Pages F32 - F33
13
Pages F32 - F33
FKSDED ..
Pages F32 - F33
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F34
Ethernet
TURCK
Process Automation – Networks
Ethernet, RJ45 Connector Dimensions / Configuration
Specifications
Housing:
Protection:
Rated Voltage:
Rated Current:
Ambient Temperature:
Polyolefin
NEMA 1, 3, 4, 6P and IEC IP 20
42 V
1.5 A
-40° to +80°C (-22° to +176°F)
14
RJ45/RJ45S ..
F35
Pages F32 - F33
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Notes:
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F36
Ethernet
TURCK
Process Automation – Networks
Unmanaged Switches
• 5 and 9 Ports Available
• IP 67 Protection
• 10/100 Mbps
• 4-pin Ethernet Connectors
Electrical
• Power Consumption: 2 W (...-E524), 4 W (...-E924)
• Operating Voltage: 10-30 VDC
Mechanical
SE-44X-E524
SE-44X-E924
SE-44X4-E524
SE-44X4-E924
• Operating Temperature: -30 to +80°C (-22 to +176°F)
• Protection: NEMA 1,3,4,6,13 and IEC IP 67
Material
• Housing: Nylon 6 (other materials available on request)
• Connectors: Nickel-plated Brass (other materials available on request)
Diagnostics (Physical)
• LEDs to indicate status of Ethernet communication
A
B
F37
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Part Number
Ports*
Ethernet Pinouts
Power Pinout
Dimensions
SE-44X-E524
5
4E
5M
A
SE-44X-E924
9
4E
5M
B
SE-44X4-E524
5
4E
4M
A
SE-44X4-E924
9
4E
4M
B
* Note: One port for each switch is a dedicated uplink port
Input/Output Connectors
4E
5M
4M
4-pin eurofast ®
Female
5-pin minifast ®
Power
4-pin minifast Power
1 = WH/OG (TX+)
2 = WH/GN (RX+)
3 = OG (TX-)
4 = GN (RX-)
1 = NC
2 = V3 = NC
4 = V+
5 = NC
1 = V+
2 = NC
3 = NC
4 = V-
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F38
Ethernet
TURCK
Process Automation – Networks
Unmanaged switches
• Molded Cords for Panel Mounting
• IP 67 Protection
• 10/100 Mbps
• 8-pin Ethernet Connectors
Electrical
• Power Consumption: 2 W (...-E524), 4 W (...-E924)
• Operating Voltage: 10-30 VDC
Mechanical
• Operating Temperature: -30 to +80 °C (-22 to +176 °F)
• Protection: NEMA 1,3,4,6,13 and IEC IP 67
Material
SE-84ST-E524/C1165
SE-84ST-E924/C1165
SE-84ST-E924/C1190
• Housing: Nylon 6 (other materials available on request)
• Connectors: Nickel-plated Brass (other materials available on request)
Diagnostics (Physical)
• LEDs to indicate status of Ethernet communication
In-Cabinet Ethernet
Connector
1 = WH/or (+TX)
2 = OR (-TX)
3 = WH/GN (+RX)
4 = BU
5 = WH/BU
6 = GN (-RX)
7 = WH/BN
8 = BN
F39
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Part Number
Ports*
Ethernet Pinout
Power Pinout
Dimensions
SE-84ST-E524/C1165
5
8E
2Wire
A
SE-84ST-E924/C1165
9
8E
2Wire
B
SE-84ST-E924/C1190
9
8E
2Wire
B
Notes:
* One port for each switch is a dedicated uplink port.
…/C1165 have one port in the cabinet; …/C1190 has two ports in the cabinet.
Input/Output Connectors
8E
2-Wire
8-pin eurofast ®
1 = WH/BU
2 = WH/BN
3 = BN
4 = OG (TX-)
5 = WH/GN (RX+)
6 = WH/OG (TX+)
7 = BU
8 = GN (RX-)
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F40
Ethernet
TURCK
Process Automation – Networks
Managed switches
• 8 Ports Available
• IP 67 Protection
• Configuration Port
• 4-pin Ethernet Connectors
Electrical
• Power Consumption: 4 W
• Operating Voltage: 10-30 VDC
Mechanical
• Operating Temperature: -30 to +80 °C (-22 to +176 °F)
• Protection: NEMA 1,3,4,6,13 and IEC IP 67
Material
• Housing: Nylon 6 (other materials available on request)
• Connectors: Nickel-plated Brass (other materials available on request)
SE-44M-E924
Diagnostics (Physical)
• LEDs to indicate status of Ethernet communication
RS 232
F41
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Inputs
Part Number
Ports*
SE-44M-E924
Ethernet Pinout
8
4E
Power Pinout
Dimensions
5M-2
A
* Note: 8 Ethernet ports plus one RS232 configuration port
Port/Power Connectors
4E
5M-2
4-pin eurofast ®
Female
5-pin minifast ® Power
1 = WH/OG (TX+)
2 = WH/GN (RX+)
3 = OG (TX-)
4 = GN (RX-)
1 = Gnd
2 = Gnd
3 = Ok
4 = V1+
5 = V2+
Configuration Port
232
Mating cordset:
RK 4.4T-*-RS 4.4T
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F42
Ethernet
TURCK
Process Automation – Networks
Ethernet, Conduit Adapters, 4-wire
• Gasket and Mounting Screws Provided
• Same Housing Style for Single or
Double Port
Housing
Part Number
Specs
Application
Pinout
Attaches to standard conduit
body* for transition to
4-wire (M12x1) eurofast ®
connector
BCA 44-E123
*Cross Hinds 3/4" Mark 9,
Form 8 or Equivalent.
Female
Nylon Housing
250 V, 9A
-40° to +75°C
BCA 44-E223
Attaches to standard conduit
body* for transition to
4-wire (M12x1) eurofast
connector
*Cross Hinds 3/4" Mark 9,
Form 8 or Equivalent.
F43
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, Wall Plate Adapters, 4 and 8-wire
• Gasket and Mounting Screws Provided
• For Use with a Single Gang Electrical Box
Housing
Part Number
Specs
Application
Pinouts
Attaches to standard single gang
electrical box for transition to
4-wire (7/8-16UN)
eurofast connector
w/punch-down blocks
BPA-44-E113
Stainless Steel
30 VAC/36 VDC,
1.5 A
-40 to +70°C
(-40 to +158°F)
BPA-84-E113
Attaches to standard single gang
electrical box for transition to
8-wire (M12x1)
eurofast connector
w/punch-down blocks
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F44
Ethernet
TURCK
Process Automation – Networks
Ethernet, Cabinet Adapter, 4-wire
• Mounts to Any Cabinet for Transition
from (M12x1) eurofast ® 4-Pin
Connectors to RJ45 Connectors
• Gasket and Mounting Hardware Included
(8-32 x 1/2")
Housing
Part Number
Specs
Application
Pinout
Female
BIC 44-E424
Nylon Housing
250 V, 4 A
-40° to +75°C
Attaches to cabinet for
transition to 4-wire
(M12x1) eurofast
connector
Panel Dimensions
RJ45 Receptacle
Female
F45
Pinout
1. White/Orange (+TX)
2. Orange (-TX)
3. White/Green (+RX)
4. N/C
5. N/C
6. Green (-RX)
7. N/C
8. N/C
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, Receptacle
• Transitions from a RJ45 Connector to a
4-wire eurofast ® Connector
Housing
Part Number
Application
Polyurethane
PUR Overmold
42 V, 1.5 A
-40° to +75°C
FKSDD RJ45SF 44
Panel mounting clearance hole 19/32" (15 mm). Panel thickness: .060-.120" (1.5-3 mm)
Wiring Diagram
RJ45 Receptacle
Female
Pinouts
eurofast Female
1. White/Orange (+TX)
2. Orange (-TX)
3. White/Green (+RX)
4. N/C
5. N/C
6. Green (-RX)
7. N/C
8. N/C
Female
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F46
Ethernet
TURCK
Process Automation – Networks
Ethernet, RJ45 Field Wireable
• Allows for Quick Connections in the Field
• Fully Shielded
• Includes Assembly Instructions
Housing
Part Number
Application
Pinout
Male
Connector, RJ45S IDC
RJ45 Plug
Male
F47
RJ45 4-wire field wireable
Pinout
1. White/Orange (+TX)
2. Orange (-TX)
3. White/Green (+RX)
4. N/C
5. N/C
6. Green (-RX)
7. N/C
8. N/C
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Ethernet, 4-Pin D-coded Field Wireables
• Allows for Quick Connections when
Pre-Molded Cables are not Available
• Available in Male, Straight and Right
Angle Connector Configurations
Housing
Part Number
Application
Pinout
Male
CMBSD 8141-0/PG9
Mates with female 4-pin D-coded
eurofast ® cordsets and receptacles
Male
CMBSD 8241-0/PG9
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F48
Ethernet
TURCK
Process Automation – Networks
Ethernet®, RJ11 Cordsets
• Double Ended
• Available in 1, 2, 5 Meter Extended Lengths
Part Number
RJ11S RJ11S 4412-*M
F49
Specs
PVC
1.5 A
42 V
-40° to +75°C
Application
Industrial phone connection
RJ11 connector
Pinouts
1.
2.
3.
4.
5.
6.
N/C
White/Orange (+TX)
Orange (-TX)
White/Green (+RX)
Green (-RX)
N/C
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
Notes:
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
F50
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement