Unbranded F100010 24 in. Plastic Garden Fence Instructions

Multi-Purpose Reusable Fence System With Pocket-Net

®

Technology

By following the instructions below, your fence will remain secure and won’t sag or fall down.

Required Tools:

• Rope or String (if needed) • Tape Measure • Marking Pen or Spray Paint (if needed)

• Hammer or Mallet • Scissors (if trimming fence is required)

Fence Installation:

Step

1 Using a tape measure, mark for posts every 5 to 7 feet.

Step

2 Drive in posts where marked and cover posts with caps.

Step

3

Starting with the first post pocket, slide fence approximately

4 inches onto the first post. Stretch fence to next post and repeat. When all posts are covered, slide fence all the way down the posts.

Questions?

Contact our Customer Service Department at 715-627-4826 during business hours or go to volmcompanies.com/contact.

Bittering agent acts as a deterrent. It is a nontoxic, odorless additive applied during production. Mesh material is high-density polyethylene. Dimensions shown are approximate. Some rolls may be slightly larger.

This is intentional to allow for slight shrinkage due to heat and stretching during production.

Fence will not sag or fall down if installed according to manufacturer’s recommendations.

P R

O U D L Y

Pocket-Net 6,367,781

EZ products ® by Solutions for the Great American Yard

volmcompanies.com