Electronic Control Systems
Systems
Catalog HY33-1825/US
North American Product Offering
Catalog HY33-1825/US
Electronic Control Systems
Systems
WARNING - USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
•
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.
•
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance,
endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry
standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
•
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the
user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or
systems.
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated in the detailed “Offer of Sale” elsewhere in this document or available at www.parker.com.
SAFETY
For safety information, see Safety Guide at www.parker.com/safety or call 1-800-CParker.
II
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, Manitoba, Canada
Catalog HY33-1825/US
Contents
Electronic Control Systems
Systems
Software platforms
IQAN Studios ..................................................................................................................... 1
IQANdevelop software ....................................................................................................... 2
Master units, IQANdesign platform
IQAN-MDL2........................................................................................................................ 3
IQAN-MD3.......................................................................................................................... 4
IQAN-MC2.......................................................................................................................... 5
IQAN-MC3.......................................................................................................................... 6
Expansion units, IQANdesign platform
IQAN-XC10 ........................................................................................................................ 7
IQAN-XA2 .......................................................................................................................... 8
IQAN-XS2 .......................................................................................................................... 9
Expansion units, IQANdesign or IQANdevelop
IQAN-XT2......................................................................................................................... 10
IQAN-LC5-C01/C02 ......................................................................................................... 11
MP handle for IQAN-LC5-C01 ......................................................................................... 12
Master unit, IQANdevelop platform
IQAN-MDM....................................................................................................................... 13
Expansion unit, IQANdevelop platform
IQAN-XP2 ........................................................................................................................ 14
Task oriented controller, IQANdevelop platform
IQAN-TOC8 ...................................................................................................................... 15
Accessories
IQAN communication and prototyping cables .................................................................. 16
IQAN connector kits and address tags............................................................................. 17
IQAN-LF1 footpedal and IQAN diagnostic gateways ....................................................... 17
Terms of sale with Warranty Limitations
Offer of sale ...................................................................................................................... 19
III
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Catalog HY33-1825/US
IQAN Studios
IQANdesign software platform
Systems
Application
The IQAN software studios cover all phases of a
machine’s life cycle, from development through
production to after sales. There are three different
studios available; IQAN Creative Studio, IQAN
Productive Studio and IQAN Active Studio.
IQAN Creative studio
IQAN Creative studio is a user-programmable software
package for the R&D department. It includes tools for
application development, simulation and initial setup.
•
IQANdesign
•
IQANsimulate
•
IQANrun
•
IQAN Studio software CD-ROM
IQAN Productive studio
IQAN Productive studio is a software package for the
manufacturing and service departments. It includes
development tools for customization and automation
of production and maintenance processes.
•
1 licence
•
IQANscript
The user’s manual for IQANdesign is provided in
electronic format and may be downloaded from our
website, www.iqan.com. For a printed manual, contact
Parker Catalog Services.
•
IQANcustomize
•
IQANsimulate
•
IQANrun
Communication cables are not included. Order the
cables you need from the accessories section.
IQAN Active studio
IQAN Active studio is a software package for service
and production personnel. It includes tools for machine
diagnostics, setup and simulation.
Contents
When ordering IQAN Studios, the following items
are included:
Requirements
CPU
PC compatible, Pentium® II 233 MHz
or better
RAM
minimum 256 Mbyte
(512 Mbyte recommended)
HD
100 Mbyte storage space available
Ports
serial port, RS232 or USB port
Display
XVGA
(1280x1024 recommended)
Software
Windows® 2000, XP, Vista, 7
•
IQANrun
•
IQANsimulate
IQAN Studios are used with the newest IQAN products
including the IQAN-MD3 and IQAN-MDL2 master/
display units and also with the IQAN-MC2 controller.
Description
IQAN Creative Studio
IQAN Productive Studio
IQAN Active Studio
Ordering PN
20073643
20073644
20073642
Upgrade
It is always possible to download the latest version
from our web site www.iqan.com.
1
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Catalog HY33-1825/US
IQAN software
IQANdevelop software platform
Systems
Application
IQANdevelop is a software tool for adding modules
and channels to the IQAN control system in order to
build functions for the developer’s mobile machine
application.
The software is based on the different modules’ block
diagrams. To add a new module, you create a new
block diagram. From the block diagram it is easy to
set/edit channel parameters and measure the IQAN
system.
With the navigator function in IQANdevelop you get
an overview of the connected channels in a specific
function. In this way it is easy to see how the channels
interact with each other.
IQANdevelop is also a tool for measuring and
troubleshooting IQAN systems. With a logging
function, measurements can be viewed graphically.
IQANdevelop PRO also includes IQANsimulate, for
performing a virtual test of your application before
installing it on the machine. IQANsimulate requires
a National Instruments CAN communication card in
order to operate.
Contents
When ordering IQANdevelop, the following items
are included:
•
IQANdevelop software CD-ROM
•
1 licence
•
1 serial cable
•
1 simulation cable (PRO version only)
IQANdevelop Change is a service tool which simplifies
setup during production or after-sales service for your
IQAN controlled mobile machine. Features that have
been set as adjustable are easily accessed with
the Change software by production employees and
service personnel to fine tune and troubleshoot your
machine’s operation.
The user’s manual for IQANdevelop is available in
electronic format and may be downloaded from our
website, www.iqan.com.
Requirements
CPU
PC compatible, Pentium® II 233 MHz
or better
IQANdevelop software is used with the IQAN-MDM
master/display and also with the IQAN-TOC8 and
IQAN-TOC2 standalone controllers.
RAM
minimum 256 Mbyte
(512 Mbyte recommended)
HD
100 Mbyte storage space available
Description
IQANdevelop PRO
IQANdevelop Change
Ports
serial port, RS232 or USB port
Display
XVGA
(1280x1024 recommended)
Software
Windows® 2000, XP
(Windows® XP is recommended)
Ordering PN
20005607
20005606
Upgrade
It is always possible to download the latest version
from our web site www.iqan.com.
2
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Master display unit, IQANdesign platform
Systems
Catalog HY33-1825/US
IQAN-MDL2
Application
The IQAN-MDL2 is a central unit that works with a
variety of expansion modules in an IQAN control
system. The units work as a master, display information,
provide a data gateway and have a variety of flexible
I/O channels.
The IQAN-MDL2 is intended for the in-cab environment
and will display vehicle data and system information.
In most applications the display will replace all
mechanical dial type instruments. The unit has a 6.5”
transflective TFT color display that has very high
optical performance.
General
Weight
Operating temperature
Storage temperature
Protection
Voltage supply
Current consumption (idle)
Data interface
Type
Communication ports
Type
Modem (MDL only)
Type
Outputs
Proportional outputs
Type current mode
PWM mode
Signal range
Dither frequency
Resolution
Digital outputs
Type
Max load
The module can control proportional valves using
current mode (current closed-loop) or PWM mode
(voltage open-loop) signals. The analog inputs accept
0-5V signals from input devices or sensors. These
inputs can also be set up to accept one frequency or
directional frequency (quadrature) input. Many outputs
may alternatively be used as digital inputs for switches.
The IQAN-MDL2 is connected to other units by four
CAN buses. All CAN buses may be configured as ICP
(IQAN CAN Protocol), SAE J1939 or Generic CAN
(user defined). The unit has two RS232 ports and a
USB port for communication.
0.9 Kg
-30 to +50 °C
-30 to +70 °C
in-cab use
11 - 32 VDC
180 mA (28 VDC)
170 mA (14 VDC)
Parker ICP, SAEJ1939,
generic (user defined)
RS232, USB
GSM triband
(900/1800/1900 MHz)
The IQAN-MDL2 has a large internal memory for
logging and may be connected to an external modem
for remote diagnostics.
2 double
current - closed-loop
voltage - open-loop
100 - 2000 mA
25 - 333 Hz
1 mA
Description
IQAN-MDL2
high side switch
2A
Ordering PN
20075847
206
Inputs
Voltage inputs
Signal range
0 - 5 VDC
Resolution
5 mV
Frequency inputs
Signal range (speed mode) 2 - 30000 Hz
(position mode) 0 - 30000 Hz
Quadrature inputs
Signal range (speed mode) 2 - 30000 Hz
(position mode) 0 - 30000 Hz
Digital inputs
DIN-A thru -D, DIN-M thru -P
Signal high
>2 VDC
Signal low
<0.8 VDC
DIN-E thru -L
Signal high
>3 VDC
Signal low
<2.5 VDC
143
KN
OB
63
units=mm
3
81
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Master display units, IQANdesign platform
Systems
Catalog HY33-1825/US
IQAN-MD3
Application
The IQAN-MD3 is a master unit that works with a variety
of expansion modules in the IQANdesign platform
control system. The MD3 is fully programmable for
use in any machine application, as a graphical user
interface and as a CAN gateway.
The IQAN-MD3 is constructed to be weatherproof for
outdoor use. The MD3 will display vehicle data and
system information.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Performance
Processor
Logging
Sample time
Software tools
The IQAN-MD3 has a 3.5” transflective TFT color
display. There are five navigation buttons and four ’soft’
function buttons to make interaction with the control
simple for the operator.
0.3 Kg
-30 to +60 °C
-25>LCD off >+75 °C
outdoor use
11- 32 Vdc
130 mA (28 Vdc)
190 mA (14 Vdc)
The unit is designed to be easily mounted in a vehicle
dashboard or exterior control panel. The unit has
two sealed and keyed Deutsch DTM 12 position
connectors.
For time critical functions the MD3's sample rate can
be set as low as 10 ms. The unit has a large internal
memory for events and logging that is capable of
storing 80,000 records.
32-bit (144 MHz)
80K records
min 10ms
IQANdesign family
The MD3 analog inputs accept 0-5V signals from input
devices or sensors. These inputs can also be set up
as on-off inputs. A digital output is available and may
be used for alarm or alert signals.
Communication interfaces
CAN (ISO 11898)
2
Protocols
ICP, SAE J1939,
CANopen, etc
RS-232
1
Protocols
AT-Hayes,GSM07.07,
GSM07.05, IDP
USB 2.0 (full speed)
1
Outputs
Digital output
Type
Max load
Inputs
Voltage inputs
Signal range
Resolution
Digital inputs
Signal high
Signal low
The MD3 is connected to other units by two CAN
busses. All CAN busses may be configured as
ICP (IQAN CAN Protocol), SAE J1939 or Generic
CAN. The unit supports RS232 for modem (remote
diagnostic) connection and USB for communication
with a PC.
Description
IQAN-MD3
1
high side switch
200 mA
Ordering PN
20072409
137
7
0 - 5 Vdc
1.2 mV
(7)1
4 Vdc
1 Vdc
1) The voltage and digital inputs share the same physical pins. The
user defines the channels/pins with IQANdesign.
116
units=mm
4
CO
NN
EC
23
TOR
S
47
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Master units, IQANdesign platform
Systems
Catalog HY33-1825/US
IQAN-MC2
Application
The IQAN-MC2 is a flexible master unit for the IQAN
bus system. This unit is suitable for use as either a
Bus master or standalone control. The IQAN-MC2 has
new I/O flexibility that allows the user greater freedom
in defining signals for both measurement and control.
The different input types are voltage, on/off, pulse
and frequency. The outputs are proportional and on/
off. The unit also has two CAN interfaces for bus
communication using IQAN CAN Protocol (ICP) and
SAE J1939 or Generic CAN.
General
Weight
Temperature range
Protection
Voltage supply
Current consumption (idle)
Data interface
Type
The MC2 is equipped with a Real Time Clock and can
perform data logging functions.
0.7 Kg
-40 to +70 °C
outdoor use
11- 32 VDC
160 mA (28 VDC)
200 mA (14 VDC)
The IQAN-MC2 can control proportional valves using
current mode (current closed-loop) or PWM mode
(voltage open-loop) signals. The analog inputs will
accept 0-5V signals from input devices or sensors. The
inputs can also be configured for 5 frequency inputs.
Some outputs may alternatively be used as voltage
inputs or digital inputs for switches. For communication
and diagnostics the MC2 has a USB interface.
Parker ICP
(IQAN CAN Protocol)
J1939, Generic CAN
Communication port
Type
USB 1.1
Outputs
Proportional outputs
Type current mode
PWM mode
Signal range
Dither frequency
Resolution
Digital outputs
Type
Max load
8 double (max)1
current - closed-loop
voltage - open-loop
100 - 2000 mA
25 - 333 Hz
1 mA
24 (max)1
high side switch
2000 mA
Inputs
Voltage inputs
Signal range
Resolution
Frequency inputs
Signal range (speed mode)
(position mode)
Digital inputs
Signal high
Signal low
13 (max)1
0 - 5 VDC
5 mV
5 (max)1
2 - 20000 Hz
0 - 20000 Hz
13 (max)1
4 VDC - VBAT
0 - 1 VDC
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The IQAN-MC2 has a membrane to
prevent condensation inside the housing. Additional
protection allows the unit to be steam-cleaned. This
controller is designed for the outdoor environment.
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-MC2
Ordering PN
20070899
60
1) The flexible inputs and outputs share the same physical pins. The
user defines the channels/pins with IQANdesign.
32
142
164
67
52
75
5
units=mm
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Master units, IQANdesign
Systems
Catalog HY33-1825/US
IQAN-MC3
Application
The IQAN-MC3 is a SIL2 rated master module in the
IQANdesign platform. It can be used as a standalone
controller, as a single bus master, or together with
other IQAN master modules.
General
Weight
Temperature range
Operating, ambient
Storage, ambient
Protection
Voltage supply
Current consumption (idle)
CAN buses
Protocols
All IQAN modules are designed with the functional
safety requirements of mobile machines in mind. The
IQAN-MC3 is especially suited for applications with
higher demands on functional safety, where there is a
need to prove the safety integrity of each implemented
safety function. It is designed in accordance with IEC
61508, and can be used to implement safety functions
of up to SIL2. When applying EN ISO 13849-1 for
safety functions, it can be used as a PLd subsystem.
1.1 kg
All of the 32 inputs on the IQAN-MC3 can be used for
safety related signals, when the inputs are configured
in pairs. On the unit there are analog inputs for 0-5 V
signals from e.g. hall-effect or potentiometer sensors;
digital inputs for e.g. switches; and frequency inputs.
Frequency inputs can be configured to read signals
from quadrature encoders, or alternatively to be used
as digital inputs.
-40 to +85 °C
-40 to +100 °C
outdoor, chassis
9 - 32 Vdc
160 mA (24V)
240 mA (12V)
41
Parker ICP
(IQAN CAN Protocol)
SAE J1939, Generic CAN
As a supply for sensors, it has two separately
monitored 5 V reference signals.
1) It is recommended that one CAN bus is dedicated for diagnostic
purposes (PC interface)
Safety
IEC 61508
EN ISO 13849-1
PFHd
Outputs
Proportional outputs
Current output pairs
Type
Signal range
Dither frequency
Digital outputs
Dedicated digital outputs
Type
Max load
Inputs
Max number of inputs
Voltage inputs
Signal range
Frequency inputs
Signal high
Signal low
Alternative configuration
Dedicated digital inputs
Signal high
Signal low
All of the outputs on the IQAN-MC3 can be used for
safety related signals. There are four proportional
current outputs designed to drive proportional
hydraulic valves, where each output controls one bidirectional valve section. The unit also has five digital
outputs for driving on-off solenoids. Two of these are
also intended to function as alarm outputs, for e.g.
LED lamps.
Up to SIL2
Up to PLd
< 10-7
4
current closed loop
100-2000 mA
70-333 Hz
The enclosure is designed to protect the electronics
in a harsh environment on mobile machines. On the
front of the unit, there are four sealed and individually
keyed Deutsch DT connectors.
5
hs+ls switch
3x3A
2 x 1.5 A
Description
IQAN-MC3
32
16
0 - 5 Vdc
8
4 Vdc - 32 Vdc
0 - 1 Vdc
Quadrature in (4)
Digital in (8)
8
4 Vdc - 32 Vdc
0 - 1 Vdc
Ordering PN
20077717
units=mm
6
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Expansion units, IQANdesign
Systems
Catalog HY33-1825/US
IQAN-XC10
Application
The IQAN-XC10 is an IQANdesign platform expansion
module in the IQAN product group. This unit is
designed to get a high digital I/O count in one module.
All IQAN expansion modules communicate with a
master over a CAN bus, using the IQAN CAN protocol.
The module has a large number of digital inputs for
connection to switches. It also has analog inputs
for connection to 0-5 Vdc sensors from resistive or
Hall-effect sensors and joysticks. The sensors can be
powered from the 5 V reference on the module. For
flexibility, all of the analog voltage inputs can also be
configured as digital inputs.
General
Weight
Temperature range
Operating, ambient
Storage, ambient
Protection
Voltage supply
Current consumption (idle)
Data interface
Outputs
Digital out high
Type
Max load
Max PWM frequency
Digital out low
Type
Max load
Inputs
Voltage inputs
Signal range
Resolution
Frequency inputs
Signal range
Digital inputs
Signal high
Signal low
There are two types of frequency inputs, allowing for
both active sensors, such as Hall effect sensors, and
for inductive pickup sensors.
1.2 kg
-40 to +85 °C
-55 to +125 °C
IP66
7 - 32 Vdc
200 mA
Parker ICP
(IQAN CAN Protocol)
The module has a large number of digital outputs
designed for driving on-off solenoids in a hydraulic
system. The dedicated digital outputs can also be
used for driving other types of loads, such as LEDs.
Some of the outputs can also be configured as PWM
outputs, for less demanding proportional functions
when temperature compensation is not needed. The
PWM outputs are configured in pairs, where each pair
is intended for one valve section. These outputs are
monitored, and use a combination of high-side and
low-side switches to make it possible to shut down in
the event of wiring faults.
16
high-side switch
2.5 A
500 Hz
4
low-side switch
2.5 A
The IQAN-XC10 is designed for use on mobile
machinery. It uses two keyed 35-pin Ampseal
connectors. The unit also has two LEDs for aiding
diagnostics when it is not connected to a master
display.
10
0 - 5 Vdc
5 mV
4
0 - 10000 Hz
16
3.65 Vdc - VBAT
0 - 1.56 Vdc
Description
IQAN-XC10
Ordering PN
20077638
Ø8.2
6.2
47
23
12
14
5
7
4
25
units=mm
7
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Expansion units, IQANdesign platform
Systems
Catalog HY33-1825/US
IQAN-XA2
Application
The IQAN-XA2 is the next generation of expansion
module in the IQAN product group. This unit is
designed for high digital I/O count, weather resistance,
and safety.
All IQAN expansion modules communicate with a
master over a CAN bus. The XA2 module has new
I/O flexibility that allows the user greater freedom in
defining signals for measurement and control.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Data interface
The IQAN-XA2 can control proportional valves using
current mode (current closed-loop) or PWM mode
(voltage open-loop) signals. The analog inputs accept
0-5V signals from input devices or sensors. These
inputs can also be set up to accept 4 frequency or
2 directional frequency (quadrature) inputs. Many
outputs may alternatively be used as digital inputs for
switches. The XA2 also has a number of high power
digital (on-off) outputs.
0.7 Kg
-40 to +70 °C
outdoor use
11- 32 VDC
180 mA (28 VDC)
170 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
Outputs
Proportional outputs
Type current mode
PWM mode
Signal range
Dither frequency
Resolution
Digital outputs
Type
Max load
6 double (max)1
current - closed-loop
voltage - open-loop
100 - 2000 mA
25 - 333 Hz
1 mA
12 (max)1
high side switch
2A
Inputs
Voltage inputs
Signal range
Resolution
Frequency inputs
Signal range (speed mode)
(position mode)
Quadrature inputs
Signal range (speed mode)
(position mode)
Digital inputs
Signal high
Signal low
8 (max)1
0 - 5 VDC
5 mV
4 (max)1
2 - 30000 Hz
0 - 30000 Hz
2 (max)1
2 - 30000 Hz
0 - 30000 Hz
20 (max)1
4 VDC - VBAT
0 - 1 VDC
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The XA2 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-XA2 is made using selected components
and conforms to strict international requirements.
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-XA2
Ordering PN
5010033
60
1) The flexible inputs and outputs share the same physical pins. The
user defines the channels/pins with IQANdesign.
32
142
164
67
52
75
8
units=mm
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Expansion units, IQANdesign platform
Systems
Catalog HY33-1825/US
IQAN-XS2
Application
The IQAN-XS2 is the next generation of expansion
module in the IQAN product group. This unit is
designed for high digital I/O count, weather resistance,
and safety.
All IQAN expansion modules communicate with a
master over a CAN bus. The XS2 module has a large
number of inputs and outputs that allows the user to
have fewer modules for digital signals.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Data interface
The IQAN-XS2 can control valves using digital (on-off)
output signals. The analog inputs accept 0-5V signals
from input devices or sensors. These analog inputs
may alternatively be used as high impedance digital
inputs for switches. The XS2 also has a number of
dedicated digital (on-off) inputs.
0.7 Kg
-40 to +70 °C
outdoor use
11- 32 VDC
180 mA (28 VDC)
170 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
Outputs
Digital outputs
Type
Max load
12
high side switch
2A
Inputs
Voltage inputs
Signal range
Resolution
Digital inputs
Signal high
Signal low
8 (max)1
0 - 5 VDC
5 mV
20 (max)1
4 VDC - VBAT
0 - 1 VDC
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The XS2 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-XS2 is made using selected components
and conforms to strict international requirements.
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-XS2
Ordering PN
5010017
1) The flexible inputs and outputs share the same physical pins. The
user defines the channels/pins with IQANdesign.
60
32
142
164
67
52
75
9
units=mm
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Expansion units, IQANdesign or IQANdevelop
Systems
Catalog HY33-1825/US
IQAN-XT2
Application
IQAN-XT2 is one of the “rugged generation” of
IQAN expansion modules. Key improvements for
this generation of modules are flexibility, weather
resistance and safety.
All IQAN expansion modules communicate with a
master over a CAN-BUS serial link. The XT2 has
an additional CAN hub designed to interface with
J1939 diesel engines on mobile machinery and has
a dedicated output for electronic throttle control.
General
Weight
Operating temperature
Protection
Voltage supply 9 - 34 VDC
Current consumption (idle)
Data interface
Additional CAN hub
The XT2 module has a flexible I/O interface which
gives system designers increased options. The same
physical pin can be used for different types of inputs
or outputs. New types of I/O such as E-gas and PWM
outputs increase the flexibility of the module. Digital
outputs now have features such as softstart and
peak & hold. The J1939 CAN hub allows the XT2
to communicate directly with an electronic engine
control bus.
0.7 Kg
-40 to +70 °C
outdoor use
180 mA (28 VDC)
170 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
J1939 or other byte
aligned CAN protocol
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The XT2 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
Outputs
Proportional current outputs
Number
2 double
Signal range
60 - 1800 mA
Dither frequency
25 - 150 Hz
Dither amplitude
0 - 500 mA
Resolution
0.7 mA
Digital/ PWM (no current feedback)
Number
6 / 3 double
Type
high side switch
Max load
3A
PWM frequency
25 - 2000 Hz
E-gas/Servo motor output (PWM H-bridge)
Number
1
Signal Range
0-100% rated power
Max load
2,5A
Inputs
Voltage/Frequency
Number
Signal range
Resolution
Frequency range
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-XT2 is made using selected components
and conforms to strict international requirements.
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-XT2
Ordering PN
5010018
10/3
0 - 5 VDC
5 mV
1-10 000 Hz
60
32
142
164
67
52
75
10
units=mm
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Expansion units, IQANdesign or IQANdevelop
Systems
Catalog HY33-1825/US
IQAN-LC5-C01 / C02
Application
The IQAN-LC5-C01 is a large, coordinate joystick that
incorporates ruggedness, functionality, light weight
with high flexibility for mobile market applications.
The unit is extremely robust, able to withstand
aggressive conditions during outdoor use and in
outdoor installations, including EMI, vibrations and a
wide temperature range. The IQAN-LC5-C01 has high
I/O count and the ability to support up to 5 axes in
IQANdesign platform applications. Fourth generation
IQAN-LL joysticks are easily replaced with the IQANLC5-C02 version. The U and N handles are offered.
General (Lever base)
Weight
Voltage supply
Current consumption
CAN (ISO 11898)
Protocol
Mechanical (Lever base)
Angle of movement
Expected life
(full stroke cycles)
Lever force in neutral, XY
Full actuated, XY direction
One time loading (max.)
The IQAN-LC5-C01/C02 housing has integrated
Deutsch transportation connectors. The handle cable
may be routed completely through the main, noncorrosive housing. This makes field mounting of new
handles or replacing a bellow very easy to accomplish.
.41 kg
9 - 32 Vdc
45mA @ 14Vdc
30mA @ 28Vdc
CAN 2.0b
ICP (IQAN Protocol)
All proportional inputs are of contactless Hall effect
type with dual sensors to provide redundancy for
high safety and reliability. This makes it easy for the
application designer to meet high safety requirements
on functions by using IQAN software.
±18°
5 million
0.6 Nm
1.4 Nm
100 Nm
The IQAN-LC5-C01/C02 CAN levers are connected
to other modules through a CAN bus.
Description
IQAN-LC5-C01-U1
IQAN-LC5-C01-U2
IQAN-LC5-C01-H1
IQAN-LC5-C02-U1
IQAN-LC5-C02-U2
IQAN-LC5-C02-N2
IQAN-LC5-C02-N2E
IQAN-LC5-C02-N2T
IQAN-LC5-C02-N4
IQAN-LC5-C02-N4T
Environmental (Lever base)
Temperature range
Operating, ambient
-40 to +85° C
Storage, ambient
-40 to +100° C
Sealing (above flange)
IP65
Connection
Electrical connection
Inputs
Voltage inputs1
Signal range
Resolution
Digital inputs
Signal high
Signal low
Deutsch DTM,
2x 6 pos., 1x 12 pos.
8(1)
0-5 Vdc
1.2 mV
5
>4 Vdc
<= 1 Vdc
Ordering PN
20076330
20076331
20076332
20076333
20076334
20077690
20077686
20077685
20077688
20077687
1) The voltage inputs share the same physical pins. The user defines the channels/pins with IQAN software.
Outputs
Digital output
Type
204
1
high side switch
Max load 200 mA
105
Ø91
49
80
105
units=mm
11
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Catalog HY33-1825/US
-MP handle for IQAN-LC5-C01
General (handle)
Weight
Temperature range
Sealing
Buttons/Trigger
Expected life (electrical)
Expected life (mechanical)
Travel
Actuating force
Switching current (max)
Thumb wheel
Rated power supply (Vs)
Load resistive (min)
Load capacitive (max)
Current consumption (typ)
Analog output active range
Resolution
Angle of movement
Expected life (operations)
Connection
B0W0T1 / B2W0T0 /
B2W0T1 / B4W0T0
B4W0T1 / B4W1Tx /
B2W2Tx / B8W0Tx
Expansion units, IQANdesign or IQANdevelop
Systems
Application
The MP handle option provides a variety of control
interfaces in an ergonomic, multi-function handle that
comfortably fits your hand. The handle is a robust
design, able to withstand heavy use in outdoor
installations, including exposure to a wide range of
automotive chemicals. The handle has the capability to
have a maximum of 8 buttons or 2 proportional thumb
wheels in the faceplate. Combinations of buttons,
thumb wheels, and trigger are also possible. The MP
handle will be assembled to the IQAN-LC5-X05 base,
and the cables are routed through the base. The push
buttons and thumb wheel are easily connected to the
vehicle wire harness by a Deutsch DTM connector.
.25 kg
-40 to +85° C
outdoor use
The MP handle is made to fit either the right or left
hand, reducing inventory part numbers. The buttons
are large, and have a nice tactile feel. The proportional
thumb wheel has dual sensors providing 2 crossed
outputs that may be compared in IQAN modules for
safe operation.
0.5 million
1 million
1.5 mm
2 - 5 Nm
400 mA, 32 VAC,
resistive load
Description
IQAN-LC5-C01-MPB2W0T0
IQAN-LC5-C01-MPB2W0T1
IQAN-LC5-C01-MPB2W2T1
IQAN-LC5-C01-MPB4W0T0
IQAN-LC5-C01-MPB4W0T1
IQAN-LC5-C01-MPB4W1T1
IQAN-LC5-C01-MPB8W0T1
5 Vdc
4.5 kΩ
1 uF
16 mA
10%-90% Vs
< 2 mV
± 25 degrees
5 million
Ordering PN
20076996
20076997
20076999
20077000
20077001
20077003
20077005
Consult datasheet and pricelist for other
IQAN-LC5-C01-MP options and ordering part numbers.
Deutsch DTM, 6 pos.
Deutsch DTM, 12 pos.
MP standard faceplate configurations
B2W0T0
B2W0T1
B4W0T0
B4W0T1
B8W0T0
B8W0T1
B2W2T0
B2W2T1
B4W1T0
B4W1T1
B0W0T0
B0W0T1
units=mm
12
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Master unit, IQANdevelop platform
Systems
Catalog HY33-1825/US
IQAN-MDM
Application
The IQAN-MDM is a master unit that works with the
expansion modules in the IQANdevelop platform
control system. The IQAN-MDM is fully programmable
for use in any machine application. The unit works as
a master for controlling applications, as a graphical
user interface and as a CAN interface.
IQAN-MDM uses an improved 2.8” FSTN, black
& white LCD for the best readability in all lighting
conditions. The improved display uses Chip-On-Glass
technology for higher reliability.
General
Weight
Rated power supply
Min/max power
Operating temperature
(reduced display update)
Protection
Current consumption
Data interface
Display
Type
Resolution
Performance
Processor
Sample time
Software tools
Function buttons and control buttons in combination
with a graphical display makes system feedback with
user interaction possible. With the three function
buttons, a decrease/increase value-button and an
escape-button, it is easy to adjust, calibrate and
measure the IQAN system. In case of an error the
display will alert the operator with a signal and a
message on the display.
0.2 kg
12-24 Vdc
9/32 Vdc
-30°C to +70°C
-30°C to -10°C
outdoor use
max 100 mA (28 Vdc),
max 180 mA (14 Vdc)
Parker ICP
(IQAN CAN Protocol)
IQAN-MDM is designed for in-cab as well as outdoor
use. It can be used in both 12 and 24 Vdc systems.
The IQAN-MDM is connected to other units by a CAN
bus. The CAN bus may be configured as ICP (IQAN
CAN Protocol), SAE J1939 or Generic CAN. The
RS232 interface is used for connection with PC and
for land line or wireless modem (remote diagnostic)
connection.
2.8” B/W LCD
202x32 pixels
16-bit (16 MHz)
20-100 ms
IQANdevelop family
The IQAN-MDM also contains a real time clock, an
alarm output and can present text in 10 different
languages. A green LED indicator on the back of
the module indicates supply voltage and status
”heartbeat”.
Communication interfaces
CAN (ISO 11898)
1
Protocols
ICP, SAE J1939,
CANopen, etc
RS-232
1
Protocols
AT-Hayes,GSM07.07,
GSM07.05, IDP
Outputs
Digital output
Type
Max load
Buzzer
Description
IQAN-MDM
Ordering PN
5010010
1
high side switch
1.2 A
Sound alarm output
72
135
10
29
61
units=mm
13
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Expansion unit, IQANdevelop platform
Systems
Catalog HY33-1825/US
IQAN-XP2
Application
IQAN-XP2 is one of the “rugged generation” of
IQAN expansion modules. Key improvements for
this generation of modules are flexibility, weather
resistance and safety.
All IQAN expansion modules communicate with a
master over a CAN-BUS serial link. Mobile machine
I/O is controlled by selecting the appropriate
expansion module from the IQAN product family.
The XP2 module has a flexible I/O interface which
gives system designers increased options. The same
physical pin can be used for different types of I/O.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Data interface
Various types of I/O such as PWM outputs increase the
flexibility of the module. Digital outputs have features
including softstart and peak & hold.
0.7 Kg
-40 to +70 °C
outdoor use
9 - 34 VDC
105 mA (28 VDC)
90 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The XP2 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
Outputs
Proportional current outputs
Number
4 double
Signal range
60 - 1800 mA
Dither frequency
25 - 150 Hz
Dither amplitude
0 - 500 mA
Resolution
0.7 mA
Digital/ PWM (no current feedback)
Number
4/ 2 double
Type
high side switch
Max load
3A
PWM frequency
25 - 2000 Hz
Inputs
Voltage/Frequency
Number
Signal range
Resolution
Frequency range
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-XP2 is made using selected components
and conforms to strict international requirements.
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-XP2
Ordering PN
5010016
4/2
0 - 5 VDC
5 mV
1-30000 Hz
60
32
142
164
67
52
75
14
units=mm
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Task oriented controller, IQANdevelop platform
Systems
Catalog HY33-1825/US
IQAN-TOC8
Application
IQAN-TOC8 is from the same family as the ”rugged”
generation of expansion modules in the IQAN product
group. These modules focus on flexibility, weather
resistance and safety.
General
Weight
Operating temperature
Protection
Voltage supply 9 - 34 VDC
Current consumption (idle)
Data interface
CAN hub
IQAN-TOC8 is a general purpose controller and
communicates with a variety of input and output
devices. It connects to a laptop PC and is programmed
with IQANdevelop software. No Master module is
required. It has proportional current outputs for valve
control, digital/PWM outputs for auxiliary functions and
analog/digital inputs for signals like pressure, RPM
or temperature. The unit has a CAN hub designed to
interface with a SAE J1939 network.
0.7 Kg
-40 to +70 °C
outdoor use
The IQAN-TOC8 has a flexible I/O interface. The same
physical pin can be used for different types of I/O. New
types of I/O such as digital PWM outputs increase the
flexibility of the controller. The digital outputs have new
features such as softstart and peak & hold.
180 mA (28 VDC)
170 mA (14 VDC)
RS232
(using IQANdevelop)
J1939 or other byte
aligned CAN protocol
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The TOC8 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
Outputs
Proportional current outputs
Number
2 double
Signal range
60 - 1800 mA
Dither frequency
25 - 150 Hz
Dither amplitude
0 - 500 mA
Resolution
0.7 mA
Digital/ PWM (no current feedback)
Number
6 / 3 double
Type
high side switch
Max load
3A
PWM frequency
25 - 2000 Hz
Inputs
Voltage/Frequency
Number
Signal range
Resolution
Frequency range
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-TOC8 is made using selected components
and conforms to strict international requirements.
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-TOC8
Ordering PN
5010024
10/4
0 - 5 VDC
5 mV
2-10 000 Hz
60
32
142
164
67
52
75
units=mm
15
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Catalog HY33-1825/US
Accessories
IQAN cables and connector kits
Systems
Communication cables
Prototype installation cables
5030024
RS232-programming cable
length: 1,5 meters
use with: IQAN-MDM, -TOC8
(TOC8 requires adapter cable)
5030025
C1-cable, no seals
length: 2,5 meters
use with: IQAN-MDL2
5030029
C1-cable, with seals
length: 2,5 meters
use with: IQAN-MDM
5030080
Remote diagnostics-modem cable
length: 1,5 meters
use with: IQAN-MDM, -TOC8,
(TOC8 requires adapter cable)
5030030
C1-cable, with seals
length: 2,5 meters
use with: IQAN-XA2, -XS2, -XT2,
-XP2, -TOC8, -MC2
5030089
Adapter-cable, panel mount
length: 0,4 meters
use with: IQAN-TOC8, -TOC2
5030125
C1-cable, sealed
length: 2,5 meters
use with: IQAN-MD3
5030103
RS232-programming cable
length: 1,5 meters
use with: IQAN-MDL2
5030126
C2-cable, sealed
length: 2,5 meters
use with: IQAN-MD3
5030110
USB-programming cable
length: 1,5 meters
use with: IQAN-MDL2
50301271
C1-cable, sealed
length: 2,5 meters
use with: IQAN-LC5-C01, -C02
1) from catalog HY33-1800/US
5030124
USB adapter-cable, panel mount
length: 0,4 meters
use with: IQAN-MC2, -MD3
5030216
C1-cable, sealed, key A
length: 2,5 meters
use with: IQAN-MC3
5030217
C2-cable, sealed, key B
length: 2,5 meters
use with: IQAN-MC3
2830014
USB adapter-cable, panel mount
length: 0,4 meters
use with: IQAN-MDL2
5030218
C3-cable, sealed, key C
length: 2,5 meters
use with: IQAN-MC3
5030219
C4-cable, sealed, key D
length: 2,5 meters
use with: IQAN-MC3
16
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Catalog HY33-1825/US
Accessories
IQAN cables and connector kits
Systems
Connector kits
Address tags
5031022
C1-connector, 6 position
use with: IQAN-MDM
5030060 - 5030067
IQAN address tags 0-7 with AMP
terminals.
Bag of 10 pcs.
5030070 - 5030077
IQAN address/termination tags
0T-7T with AMP terminals.
Bag of 10 pcs.
5031048
C1 and C2 -connectors, 12 pos.
use with: IQAN-LL, -LM
5030160 - 5030167
IQAN address tags 0-7 with
Deutsch terminals.
Bag of 10 pcs.
5031063
C1-connector, 42 position
use with: IQAN-XA2, -XS2, -XT2,
-XP2, -TOC8, -MDL2, -MC2
5030170 - 5030177
IQAN address/termination tags
0T-7T with Deutsch terminals.
Bag of 10 pcs.
20072406
C1-connector (grey), 12 position
use with: IQAN-G1
Additional items
5010011
IQAN-LF1 electric speed/throttle
pedal.
use with: Engine ECUs, IQAN
systems.
20073081
C1-connector (grey), 12 position
C2-connector (black), 12 position
use with: IQAN-MD3
200758481
IQAN-G1 gateway. Wireless GSM
modem for remote diagnostics.
use with: IQAN-MDM, -TOC8,
-MDL2, -MD3
5035007
C1/C3-connector (grey), 6 pos.
C2-connector (grey), 12 position
use with: IQAN-LC5-C01, -C02
1) Wireless service providers must also offer two-way Circuit Switched Data (CSD)
services for transferring data.
The IQAN-G1 will not be suitable for use
in any region where the GSM service
providers do not offer CSD.
5035016
C1-connector (key A), 18 position
C2-connector (key B), 18 position
C3-connector (key C), 18 position
C4-connector (key D), 18 position
use with: IQAN-MC3
200777512
IQAN-G2 gateway. Wireless
GSM/GPRS modem for remote
diagnostics over internet.
use with: IQAN-MDL2, -MD3,
-MC2
2) IQAN-G2 functionality will be available
with a SIM-card from your preferred
Network operator, and a paid subscription to a server solution that is offered by
a Parker supplier.
Consult "IQAN accessories" datasheet and pricelist for
other accessory items and ordering part numbers.
17
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Catalog HY33-1825/US
Notes
18
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Catalog HY33-1825/US
Terms of Sale with Warranty Limitations
Offer of Sale
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, Hydraulics Group, and its authorized distributors (“Seller”) are hereby
offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for
any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer. All goods or work described will be referred to as “Products”.
1. Terms and Conditions. Seller’s willingness to offer Products, or accept an order for
Products, to or from Buyer is expressly conditioned on Buyer’s assent to these Terms and
Conditions and to the terms and conditions found on-line at www.parker.com/saleterms/.
Seller objects to any contrary or additional term or condition of Buyer’s order or any other
document issued by Buyer.
2. Price Adjustments; Payments. Prices stated on the reverse side or preceding pages of
this document are valid for 30 days. After 30 days, Seller may change prices to reflect any
increase in its costs resulting from state, federal or local legislation, price increases from its
suppliers, or any change in the rate, charge, or classification of any carrier. The prices stated
on the reverse or preceding pages of this document do not include any sales, use, or other
taxes unless so stated specifically. Unless otherwise specified by Seller, all prices are F.O.B.
Seller’s facility, and payment is due 30 days from the date of invoice. After 30 days, Buyer
shall pay interest on any unpaid invoices at the rate of 1.5% per month or the maximum
allowable rate under applicable law.
3. Delivery Dates; Title and Risk; Shipment. All delivery dates are approximate and
Seller shall not be responsible for any damages resulting from any delay. Regardless of the
manner of shipment, title to any products and risk of loss or damage shall pass to Buyer
upon tender to the carrier at Seller’s facility (i.e., when it’s on the truck, it’s yours). Unless
otherwise stated, Seller may exercise its judgment in choosing the carrier and means of
delivery. No deferment of shipment at Buyers’ request beyond the respective dates indicated
will be made except on terms that will indemnify, defend and hold Seller harmless against
all loss and additional expense. Buyer shall be responsible for any additional shipping
charges incurred by Seller due to Buyer’s changes in shipping, product specifications or in
accordance with Section 13, herein.
4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in
material or workmanship for a period of eighteen months from the date of delivery to Buyer.
The prices charged for Seller’s products are based upon the exclusive limited warranty stated
above, and upon the following disclaimer: DISCLAIMER OF WARRANTY: THIS WARRANTY
COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO PRODUCTS PROVIDED HEREUNDER. SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products upon
delivery. No claims for shortages will be allowed unless reported to the Seller within 10 days
of delivery. No other claims against Seller will be allowed unless asserted in writing within 60
days after delivery or, in the case of an alleged breach of warranty, within 30 days after the
date within the warranty period on which the defect is or should have been discovered by
Buyer. Any action based upon breach of this agreement or upon any other claim arising out
of this sale (other than an action by Seller for any amount due to Seller from Buyer) must be
commenced within thirteen months from the date of tender of delivery by Seller or, for a cause
of action based upon an alleged breach of warranty, within thirteen months from the date
within the warranty period on which the defect is or should have been discovered by Buyer.
6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL, AT ITS OPTION, REPAIR
OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE. IN NO EVENT SHALL
SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF, OR AS THE RESULT OF, THE SALE, DELIVERY, NON-DELIVERY,
SERVICING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY
CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’S WRITTEN CONSENT,
EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER IN CONTRACT, TORT OR OTHER LEGAL
THEORY. IN NO EVENT SHALL SELLER’S LIABILITY UNDER ANY CLAIM MADE BY BUYER
EXCEED THE PURCHASE PRICE OF THE PRODUCTS.
7. Contingencies. Seller shall not be liable for any default or delay in performance if caused
by circumstances beyond the reasonable control of Seller.
8. User Responsibility. The user, through its own analysis and testing, is solely responsible
for making the final selection of the system and Product and assuring that all performance,
endurance, maintenance, safety and warning requirements of the application are met. The
user must analyze all aspects of the application and follow applicable industry standards and
Product information. If Seller provides Product or system options, the user is responsible for
determining that such data and specifications are suitable and sufficient for all applications
and reasonably foreseeable uses of the Products or systems.
9. Loss to Buyer’s Property. Any designs, tools, patterns, materials, drawings, confidential
information or equipment furnished by Buyer or any other items which become Buyer’s
property, may be considered obsolete and may be destroyed by Seller after two consecutive
years have elapsed without Buyer placing an order for the items which are manufactured
using such property. Seller shall not be responsible for any loss or damage to such property
while it is in Seller’s possession or control.
10. Special Tooling. A tooling charge may be imposed for any special tooling, including
without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. Such
special tooling shall be and remain Seller’s property notwithstanding payment of any charges
by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which
is utilized in the manufacture of the Products, even if such apparatus has been specially
converted or adapted for such manufacture and notwithstanding any charges paid by Buyer.
Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of
any special tooling or other property in its sole discretion at any time.
11. Buyer’s Obligation; Rights of Seller. To secure payment of all sums due or otherwise,
Seller shall retain a security interest in the goods delivered and this agreement shall be
deemed a Security Agreement under the Uniform Commercial Code. Buyer authorizes Seller
as its attorney to execute and file on Buyer’s behalf all documents Seller deems necessary
to perfect its security interest. Seller shall have a security interest in, and lien upon, any
property of Buyer in Seller’s possession as security for the payment of any amounts owed
to Seller by Buyer.
12. Improper Use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless
from any claim, liability, damages, lawsuits, and costs (including attorney fees), whether for
personal injury, property damage, patent, trademark or copyright infringement or any other
claim, brought by or incurred by Buyer, Buyer’s employees, or any other person, arising out
of: (a) improper selection, improper application or other misuse of Products purchased by
Buyer from Seller; (b) any act or omission, negligent or otherwise, of Buyer; (c) Seller’s use
of patterns, plans, drawings, or specifications furnished by Buyer to manufacture Product;
or (d) Buyer’s failure to comply with these terms and conditions. Seller shall not indemnify
Buyer under any circumstance except as otherwise provided.
13. Cancellations and Changes. Orders shall not be subject to cancellation or change
by Buyer for any reason, except with Seller’s written consent and upon terms that will
indemnify, defend and hold Seller harmless against all direct, incidental and consequential
loss or damage. Seller may change product features, specifications, designs and availability
with notice to Buyer.
14. Limitation on Assignment. Buyer may not assign its rights or obligations under this
agreement without the prior written consent of Seller.
15. Entire Agreement. This agreement contains the entire agreement between the Buyer
and Seller and constitutes the final, complete and exclusive expression of the terms of the
agreement. All prior or contemporaneous written or oral agreements or negotiations with
respect to the subject matter are herein merged.
16. Waiver and Severability. Failure to enforce any provision of this agreement will not
waive that provision nor will any such failure prejudice Seller’s right to enforce that provision
in the future. Invalidation of any provision of this agreement by legislation or other rule of law
shall not invalidate any other provision herein. The remaining provisions of this agreement
will remain in full force and effect.
17. Termination. This agreement may be terminated by Seller for any reason and at any
time by giving Buyer thirty (30) days written notice of termination. In addition, Seller may by
written notice immediately terminate this agreement for the following: (a) Buyer commits a
breach of any provision of this agreement (b) the appointment of a trustee, receiver or custodian for all or any part of Buyer’s property (c) the filing of a petition for relief in bankruptcy
of the other Party on its own behalf, or by a third party (d) an assignment for the benefit of
creditors, or (e) the dissolution or liquidation of the Buyer.
18. Governing Law. This agreement and the sale and delivery of all Products hereunder
shall be deemed to have taken place in and shall be governed and construed in accordance
with the laws of the State of Ohio, as applicable to contracts executed and wholly performed
therein and without regard to conflicts of laws principles. Buyer irrevocably agrees and
consents to the exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio
with respect to any dispute, controversy or claim arising out of or relating to this agreement.
Disputes between the parties shall not be settled by arbitration unless, after a dispute has
arisen, both parties expressly agree in writing to arbitrate the dispute.
19. Indemnity for Infringement of Intellectual Property Rights. Seller shall have no
liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets
or similar rights except as provided in this Section. Seller will defend and indemnify Buyer
against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress
and trade secrets (“Intellectual Property Rights”). Seller will defend at its expense and will
pay the cost of any settlement or damages awarded in an action brought against Buyer
based on an allegation that a Product sold pursuant to this Agreement infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is
contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such
allegations of infringement, and Seller having sole control over the defense of any allegations
or actions including all negotiations for settlement or compromise. If a Product is subject
to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its
sole expense and option, procure for Buyer the right to continue using the Product, replace
or modify the Product so as to make it noninfringing, or offer to accept return of the Product
and return the purchase price less a reasonable allowance for depreciation. Notwithstanding
the foregoing, Seller shall have no liability for claims of infringement based on information
provided by Buyer, or directed to Products delivered hereunder for which the designs are
specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any Product sold hereunder. The foregoing provisions of this
Section shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive
remedy for infringement of Intellectual Property Rights.
20. Taxes. Unless otherwise indicated, all prices and charges are exclusive of excise, sales,
use, property, occupational or like taxes which may be imposed by any taxing authority upon
the manufacture, sale or delivery of Products.
21. Equal Opportunity Clause. For the performance of government contracts and where
dollar value of the Products exceed $10,000, the equal employment opportunity clauses in
Executive Order 11246, VEVRAA, and 41 C.F.R. §§ 60-1.4(a), 60-741.5(a), and 60-250.4, are
hereby incorporated.
1/09
19
Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, MB, Canada
Parker’s Motion & Control Technologies
At Parker, we’re guided by
a relentless drive to help
our customers become more
productive and achieve
higher levels of profitability by engineering the best
systems for their requirements. It means looking at
customer applications from
many angles to find new
ways to create value. Whatever the motion and control
technology need, Parker has
the experience, breadth of
product and global reach
to consistently deliver. No
company knows more about
motion and control technology than Parker. For further
info call 1 800 272 7537
FLUID & GAS HANDLING
Key Markets
• Aerospace
• Agriculture
• Bulk chemical handling
• Construction machinery
• Food & beverage
• Fuel & gas delivery
• Industrial machinery
• Mobile
• Oil & gas
• Transportation
• Welding
Key Products
• Brass fittings & valves
• Diagnostic equipment
• Fluid conveyance systems
• Industrial hose
• PTFE & PFA hose, tubing &
plastic fittings
• Rubber & thermoplastic hose
& couplings
• Tube fittings & adapters
• Quick disconnects
AEROSPACE
Key Markets
• Aircraft engines
• Business & general aviation
• Commercial transports
• Land-based weapons systems
• Military aircraft
• Missiles & launch vehicles
• Regional transports
• Unmanned aerial vehicles
Key Products
• Flight control systems
& components
• Fluid conveyance systems
• Fluid metering delivery
& atomization devices
• Fuel systems & components
• Hydraulic systems & components
• Inert nitrogen generating systems
• Pneumatic systems & components
• Wheels & brakes
HYDRAULICS
Key Markets
• Aerospace
• Aerial lift
• Agriculture
• Construction machinery
• Forestry
• Industrial machinery
• Mining
• Oil & gas
• Power generation & energy
• Truck hydraulics
Key Products
• Diagnostic equipment
• Hydraulic cylinders
& accumulators
• Hydraulic motors & pumps
• Hydraulic systems
• Hydraulic valves & controls
• Power take-offs
• Rubber & thermoplastic hose
& couplings
• Tube fittings & adapters
• Quick disconnects
CLIMATE CONTROL
Key Markets
• Agriculture
• Air conditioning
• Food, beverage & dairy
• Life sciences & medical
• Precision cooling
• Processing
• Transportation
Key Products
• CO2 controls
• Electronic controllers
• Filter driers
• Hand shut-off valves
• Hose & fittings
• Pressure regulating valves
• Refrigerant distributors
• Safety relief valves
• Solenoid valves
• Thermostatic expansion valves
PNEUMATICS
Key Markets
• Aerospace
• Conveyor & material handling
• Factory automation
• Life science & medical
• Machine tools
• Packaging machinery
• Transportation & automotive
Key Products
• Air preparation
• Brass fittings & valves
• Manifolds
• Pneumatic accessories
• Pneumatic actuators & grippers
• Pneumatic valves & controls
• Quick disconnects
• Rotary actuators
• Rubber & thermoplastic hose
& couplings
• Structural extrusions
• Thermoplastic tubing & fittings
• Vacuum generators, cups & sensors
ELECTROMECHANICAL
Key Markets
• Aerospace
• Factory automation
• Life science & medical
• Machine tools
• Packaging machinery
• Paper machinery
• Plastics machinery & converting
• Primary metals
• Semiconductor & electronics
• Textile
• Wire & cable
Key Products
• AC/DC drives & systems
• Electric actuators, gantry robots
& slides
• Electrohydrostatic actuation systems
• Electromechanical actuation systems
• Human machine interface
• Linear motors
• Stepper motors, servo motors,
drives & controls
• Structural extrusions
PROCESS CONTROL
Key Markets
• Chemical & refining
• Food, beverage & dairy
• Medical & dental
• Microelectronics
• Oil & gas
• Power generation
Key Products
• Analytical sample conditioning
products & systems
• Fluoropolymer chemical delivery
fittings, valves & pumps
• High purity gas delivery fittings,
valves & regulators
• Instrumentation fittings, valves
& regulators
• Medium pressure fittings & valves
• Process control manifolds
FILTRATION
Key Markets
• Food & beverage
• Industrial machinery
• Life sciences
• Marine
• Mobile equipment
• Oil & gas
• Power generation
• Process
• Transportation
Key Products
• Analytical gas generators
• Compressed air & gas filters
• Condition monitoring
• Engine air, fuel & oil filtration
& systems
• Hydraulic, lubrication &
coolant filters
• Process, chemical, water
& microfiltration filters
• Nitrogen, hydrogen & zero
air generators
SEALING & SHIELDING
Key Markets
• Aerospace
• Chemical processing
• Consumer
• Energy, oil & gas
• Fluid power
• General industrial
• Information technology
• Life sciences
• Military
• Semiconductor
• Telecommunications
• Transportation
Key Products
• Dynamic seals
• Elastomeric o-rings
• EMI shielding
• Extruded & precision-cut,
fabricated elastomeric seals
• Homogeneous & inserted elastomeric
shapes
• High temperature metal seals
• Metal & plastic retained composite
seals
• Thermal management
Sales Offices
North America
Mobile Sales
Asia Pacific
Hydraulics Group Headquarters
6035 Parkland Boulevard
Cleveland, OH 44124-4141 USA
Tel: 216-896-3000
Fax: 216-896-4031
Mobile Sales Organization
and Global Sales
850 Arthur Avenue
Elk Grove Village, IL 60007 USA
Tel: 847-821-1500
Fax: 847-821-7600
Asia Pacific Headquarters
Parker Hannifin Hong Kong Ltd
8/F, Kin Yip Plaza
9 Cheung Yee Street
HK-Cheung Sha Wan, Hong Kong
Tel: 852 2428 8008
Fax: 852 2425 6896
Parker Hannifin Canada
Motion & Control Division – Milton
160 Chisholm Drive Milton
Ontario Canada L9T 3G9
Tel: 905-693-3000
Fax: 905-876-1958
Mexico
Parker Hannifin de México
Av eje uno norte num 100
Parque Industrial Toluca 2000
Toluca, Mex C.P. 50100
Tel: 52 722 2754200
Fax: 52 722 2799308
Industrial Sales
Great Lakes Region
3700 Embassy Parkway
Suite 260
Fairlawn, OH 44333 USA
Tel: 330-670-2680
Fax: 330-670-2681
Australia Headquarters
Parker Hannifin Pty Ltd.
9 Carrington Road
Castle Hill, NSW 2154, Australia
Tel: 612 9634 7777
Fax: 612 9842 5111
Southern Region
1225 Old Alpharetta Road
Suite 290
Alpharetta, GA 30005 USA
Tel: 770-619-9767
Fax: 770-619-9806
China Headquarters
Parker Hannifin Motion & Control
(Shanghai) Co., Ltd
280 Yunqiao Road,
Jin Qiao Export Processing Zone
CN-Shanghai 201206, China
Tel: 86 21 5031 2525
Fax: 86 21 5834 3714
Europe
Europe Hydraulics Group
Parker Hannifin Corporation
Parker House
55 Maylands Avenue
Hemel Hempstead, Herts
HP2 4SJ England
Tel: 44 1442 458000
Fax: 44 1442 458085
Latin America
Brazil
Hydraulics Division
Parker Hannifin Ind. e Com. Ltda
Av. FredericoRitter, 1100
Cachoeirinha RS, 94930-000 Brazil
Tel: 55 51 3470 9144
Fax: 55 51 3470 3100
Chicago Region
1163 E. Ogden Avenue
Suite 705, #358
Naperville, IL 60563 USA
Tel: 630-964-0796
Fax: 866-473-9274
Pacific Region
8460 Kass Drive
Buena Park, CA 90621
Tel: 714-228-2510
Fax: 714-228-2511
Eastern Region
100 Corporate Drive
Lebanon, NJ 08833 USA
Tel: 908-236-4121
Fax: 908-236-4146
© 2009-2012 Parker Hannifin Corporation. All rights reserved.
Parker Hannifin Corporation
Electronic Controls Division
1305 Clarence Avenue
Winnipeg, MB, Canada R3T 1T4
phone 204 452 6776
fax 204 478 1749
www.parker.com
Korea Headquarters
Parker Hannifin Korea Ltd
6F Daehwa Plaza
169 Samsung-dong, Gangnam-gu
KR-Seoul, 135-090, Korea
Tel: 82 2 559 0400
Fax: 82 2 556 8187
South Africa
Parker Hannifin Africa Pty Ltd
Parker Place
10 Berne Avenue Aeroport
P.O. Box 1153
ZA-Kempton Park 1620,
Republic of South Africa
Tel: 27 11 961 0700
Fax: 27 11 392 7213
Catalog HY33-1825/US
03/2012
Your Local Authorized Parker Distributor
Download PDF