MAB 1300 Specifications
Portable Magnetic Drilling Machines
PORTABLE MAGNETIC DRILLS
Fast, accurate hole cutting…
on the job site or in the shop!
Made in Germany
Powered by
Designed for continuous operation, CS Unitec's portable magnetic drills are ideal for drilling structural steel
and virtually any metal. We offer the most compact, powerful and reliable series of portable magnetic drills
for holes up to 5-1/8" diameter. All CS Unitec drills are heavy-duty for use in construction and industry. Our
complete line includes electric, pneumatic and hydraulic tools. They are available for prompt delivery.
CS Unitec is the industry leader in:
Our drills have unique features:
• Power-to-weight ratios
• Strongest clamping force with
high-density (HD) dual-coil magnets
• Magnetic drills for tapping
• Annular Cutters: TiAlN, HSS, cobalt
steel and carbide-tipped
• Variable-speed, multiple-geared models
• Electric, pneumatic and hydraulic power
• Reversible motors for tapping
and machining
• Swivel base stand for
hard-to-reach areas
Rugged construction and
sophisticated functionality.
Intuitive magnets, ergonomic controls
and simple operation for superior cuts.
Overheating
Protection with
CoolMag
COOLMAG ™ Electromagnets
ensure that the magnet does not overheat. When the
magnet is switched on for long periods of time, the coils
could overheat or even burn out. The CoolMag feature
reduces the power of the magnets when the drill motor is
not active. Therefore, it won't build up heat.
CS Unitec high-density dual-coil magnets are ground, not
cast, and are wound into two circles to increase the
surface area and density of the magnetic field.
Keyless,
quick-change
system for annular
cutters saves time
and money.
Just twist and lock.
Twist Drilling
ARMOR-PLATED™
TiAlN Cutters
Reaming
Countersinking
Custom machines for unique applications
Our engineers can create a drill, drill rig, or other
application-specific arrangement to meet your needs.
See page 49 for more information, or call
1-800-700-5919 for design assistance.
are ideal for all drilling
applications. A high
surface hardness and
greater lubricity allow for
drilling at high operating
temperatures with more
power and speed.
2
Tapping
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
The value is in the engineering…
the payback is in the performance.
for Active Safety
Magnetic force is the key to safety and success.
The magnetic force of your magnet depends on a number of factors: æ Thickness of material being drilled
æ Coatings or paint layers on material
æ Chips, dirt or grease between the magnet and the material
SafeMag
System
Electronic Safety
Shutoff Sensor
The SAFEMAG ™ System measures whether the magnet has sufficient adhesive force on
the material. An LED indicator on the switch panel warns you of insufficient magnetic force
(Red Light) or tells you if the correct force is present (Green Light).
LED red… insufficient magnetic force.
LED green... the magnetic
Drilling should not take place. Possible causes are
too-thin material, coatings of paint, scale or zinc.
adhesion meets the minimum
requirements. Drilling can take place.
Our Electronic Safety Shutoff Sensor
automatically shuts down the drill motor if the magnet
loses contact with the material. This emergency-off
feature helps to protect both operator and equipment.
PORTABLE MAGNETIC DRILLS
IQ Magnetic System
Integrated cable routing: MAB Series
The new generation of our MAB portable magnetic drilling
machines has been developed for increased safety. This
includes complete cable routing within the casing.
æ No threading and getting caught
æ No tearing or snapping off
Simple, ergonomic arrangement
of controls for one-handed
operation. Emergency-off
function for quick shutdown.
•
1-800-700-5919
•
High power at low speeds.
Electronic torque control
prevents damage to motor.
Visit our Web site at www.csunitec.com
3
Tool and Accessory Index
Portable Magnetic Drills
p. 8-31
MDM 40
p. 8
MAB 150
MACHINES AND ANNULAR CUTTERS
ø 1-1/2" cutter capacity
MAB 425
MAB 455
p. 12
p. 16
MAB 525
ø 2" cutter capacity
ø 7/8" twist drill capacity
ø 15/16" tapping capacity
Reversible, 2-gear motor
MAB 825 & 845
p. 14
ø 2" cutter capacity
ø 7/8" twist drill capacity
2 speeds
ø 1-3/8" cutter capacity
ø 5/8" twist drill capacity
MAB 485
p. 10
ø 1-1/2" cutter capacity
For drilling in tight spaces
p. 18
ø 2-1/2" cutter capacity
ø 1" twist drill capacity
ø 15/16" tapping capacity
Reversible, 2-gear motor
MAB 1300
p. 20
p. 22
ø 5-1/8" cutter capacity
ø 1-3/4" twist drill capacity
ø 1-5/8" tapping capacity
Reversible, 4-gear motor
The ultimate in power
ø 4" cutter capacity
ø 1-1/4" twist drill capacity
ø 1-1/8" tapping capacity
Swivel base (MAB 845)
Reversible, 4-gear motor
AutoMAB 1500
p. 25
ø 1-1/2" cutter capacity
Automatic feed
CSU Series
p. 26-29
ø 1-1/4" to 4" cutter capacity
Reversible for tapping
AIRBOR™ AB-4300
p. 30
HB-4400
p. 31
Pneumatic power
ø 2-1/16" cutter capacity
ø 1/2" twist drill
Hydraulic power
ø 2-1/16" cutter capacity
ø 1/2" twist drill
ATEX for hazardous environments
For marine, construction and underwater applications
Warranty
Products of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase. This warranty does
not apply to normal wear or products which have been abused, misused, modified or repaired by someone other than CS Unitec, Inc. or its Authorized
Service Representatives.
If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized Service Center,
transportation prepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free of charge.
CS Unitec, Inc.’s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective product. There are no
other warranties expressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential or special damages, or expenses excepting
only the cost or expense of repair or replacement as described above.
Safety
Operators of any power tool should use appropriate safety precautions for work being performed. This includes safety chains, eye protection, hearing
protection, gloves and more. Follow instructions included in operating manual.
4
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Made in Germany
Powered by
Annular Cutters
p. 32-39
p. 34-35
TiAlN ARMOR-PLATED
Unibroach™
p. 36-37
High-speed steel
7/16" to 5-1/8" diameter
1", 2" and 3" depth
Special sizes available
TCT Hornet
For higher working temperatures
7/16" to 5-1/8" diameter
1", 2" and 3" depth
p. 38-39
Cobalt/Large-dia. Cutters
Tungsten carbide-tipped
1/2" to 5-1/8" diameter
1", 2-3/8" and 3-3/8" depth
p. 38
Cobalt Cutters
Large-diameter Cutters
Accessories
p. 40-48
Lubricants
Pilot Pins, Drill Chucks and Tapping Tools
Arbors and Extensions
Power Assist
Countersinks, Drill/Taps and Chip Guard
Drilling Starter Kits
Power Worker Magnetic Stick
MOBIL CLAMP
Convert magnetic drilling machine to bench drill
p. 40
p. 40-41
p. 42-43
p. 42
p. 43
p. 44
p. 44
p. 45
Drilling Stand and Vise
p. 46
Convert hand drill to drill press
Vacuum Plates
p. 47
Pipe Saddle Clamp System
p. 48
For channeled plates and smooth surfaces
Safe, secure drilling of pipes and tubular material
Beveling, Deburring, Faceting and Finishing Machines
EKF Multi-purpose Beveling Machine
p. 50
SKF Portable Beveling Machine for Plates and Pipes
p. 51
PTX Eco Smart Linear Grinding System
p. 52
ROLEI®
p. 52
BE 5 Sheet Metal Deburring Machine
Custom Machines & Motors, Hand-held Drills, Drive Units and More
Custom-engineered Machines
Electric, Slow-speed Electric
Electric Drive Units/Special Motors
Pneumatic Drills/Drive Units
Pneumatic/Hydraulic Corner Drills
Pneumatic/Hydraulic Rotary Hammers
Pneumatic Woodboring Drills
Pneumatic/Hydraulic Nut Runners
Pneumatic/Hydraulic Drive Units
Electric and Pneumatic Dry Cutting Saws
Surface Preparation Equipment
•
p. 50-52
1-800-700-5919
•
ACCESSORIES AND OTHER TOOLS
HSS Unibroach®
p. 49, 53-61
p. 49
p. 53-54
p. 55
p. 56
p. 57
p. 58
p. 59
p. 60
p. 61
p. 62
p. 63
Visit our Web site at www.csunitec.com
5
PORTABLE MAGNETIC DRILLS
Magnetic Drill Comparison Chart
P1
MDM 40
Page 8
MAB 150
Page 10
MAB 425
Page 12
MAB 455
Page 14
MAB 485
Page 16
MAB 525
Page 18
MAB 825
MAB 845
Page 20
Annular Cutters
Diameter (ø)
up to ø 1-3/8"
up to ø 1-1/2"
up to ø 1-1/2"
up to ø 1-3/8"
up to ø 2"
up to ø 2"
up to ø 2-1/2"
up to ø 4"
Twist Drills
Diameter (ø)
up to ø 1/2"
up to ø 5/8"
up to ø 7/8"
up to ø 7/8"
up to ø 1"
up to ø 1-1/4"
Tapping
Diameter (ø)
up to ø 15/16"
up to ø 15/16"
up to ø 1-1/8"
Countersinking
Diameter (ø)
up to ø 1-9/16" up to ø 2"
up to ø 2"
Reaming
Diameter (ø)
up to ø 3/4"
up to ø 7/8"
up to ø 1-1/4"
Stroke
6-1/3"
3-1/8"
1"
6-1/3"
6-1/3"
6-1/3"
6-1/3"
10"
Weight
26-1/2 lbs.
24 lbs.
24 lbs.
29 lbs.
29 lbs.
29 lbs.
35 lbs.
55 lbs.
Speed Range 1
(RPM)
400
440
400
430
250
50-250
70-280
40-110
760
450
100-450
180-580
65-175
Speed Range 2
(RPM)
Speed Range 3
(RPM)
140-360
Speed Range 4
(RPM)
220-600
✓
✓
✓
✓
✓
✓
CoolMag
CoolMAG
SafeMag
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Set Screw
Quick-change
keyless
Quick-change
keyless
Quick-change
keyless
Quick-change
keyless
MT2
MT2
MT3
MT3
System
Electronic Safety
Shutoff Sensor
Tool Holder
✓
Set Screw
Set Screw
Set Screw
Morse Taper (MT)
Safety Friction
Clutch
✓
Torque Control
✓
Swivel Base
Magnet Size
6
✓
✓
6-5/8" x 3-1/3"
6-1/2" x 3-1/4"
•
6-5/16" x
3-3/16"
1-800-700-5919
6-5/8" x 3-1/3
•
6-5/8" x 3-1/3
6-5/8" x 3-1/3
7-1/8" x 3-1/2"
8-5/8" x 4-1/3"
Visit our Web site at www.csunitec.com
Made in Germany
CSU 32AC
CSU 32RL
Page 26
CSU 50AC
CSU 50RL
Page 27
CSU 80AC
Page 28
up to ø 2-1/16" up to ø 2-1/16" up to ø 1-1/2"
up to ø 1-1/4"
up to ø 2"
up to ø 3-3/16" up to ø 4"
Max. hole diameter
up to 5-1/8"
up to ø 1/2"
up to ø 1/2"
up to ø 7/8"
up to ø 1-1/4"
up to ø 1-1/4"
Max. twist drilling
up to 1-3/4"
up to ø 3/4"
up to ø 15/16"
up to ø 1-1/8"
(CSU 32RL only)
(CSU 50RL only)
Max. tapping
up to 1-5/8"
MAB 1300
Page 22
AIRBOR™
Page 30
up to ø 5-1/8"
up to ø 1-3/4"
HB 4400
Page 31
AutoMAB
1500
Page 25
up to ø 1/2"
up to ø 1-5/8"
CSU 100/3
Page 29
Special
Features
up to ø 3"
up to ø 2"
3.35"
up to 10-1/4"
3-3/4"
3"
5-3/4"
6"
10"
10"
112 lbs.
43 lbs.
48-1/2 lbs.
37-1/2 lbs.
24 lbs.
29 lbs.
57 lbs.
57 lbs.
30-80
400
0-630
360
450
250
100
40-140
450
175
120-480
(12" w/out retainer)
50-120
130-350
245
210-550
385
✓
✓
✓
(CSU 32RL only)
(CSU 50RL only)
✓
✓
✓
✓
✓
✓
Set Screw
Set Screw
Set Screw
Set Screw
Pneumatic
Hydraulic
✓
Allows thread
cutting
✓
✓
Overheating
protection
✓
✓
✓
Magnet adhesion
indicator
✓
✓
✓
✓
Shuts down motor if
magnetic contact lost
Set Screw
Quick-change
keyless
Quick-change
keyless
Quick-change
keyless
MT2
MT3
MT3
✓
✓
✓
MT4
PORTABLE MAGNETIC DRILLS
Powered by
✓
✓
✓
✓
Swivel base through
30˚ and 3/4"
14" x 4-3/4"
8-3/4" x 3-1/2"
7-1/4" x 3"
•
7-1/8" x 3-1/2"
6-5/16" x 3-1/4" 6-1/2 x 3-1/2"
1-800-700-5919
•
9" x 4-3/8"
9" x 4"
Visit our Web site at www.csunitec.com
7
MDM 40
PORTABLE MAGNETIC DRILLS
Cutter capacity
1 1/2" dia.
Made in Germany
Powered by
Heavy-duty compact hole drilling machine
with internal cable routing
Powerful • Reliable
• 9.25 Amp doubleinsulated motor
• Compact, 13" high
• Lightweight, 24 lbs.
All CS Unitec
high-density
dual-coil magnets
are ground, not cast,
and are wound into two
circles to increase the
surface area and density of
the magnetic field.
• Designed for continuous use
• Intelligent electronic torque
control
Drill up to 1-1/2" dia.
• Uses annular cutters
• Integrated cutting oil reservoir
• Automatic internal lubrication
Special Feature
• Internal cable routing protects the
motor power cord from external
damage
Cutter Capacity
Stroke
(length)
Speed Range
(RPM)
ø 11/2"
31/8"
440
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
8
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
MDM 40
Specifications
Made in Germany
Powered by
Cutter capacity
1 1/2" dia.
PORTABLE MAGNETIC DRILLS
7"
13"
9.5"
6.5"
3.25"
Model MDM 40
Model MDM 40 Specifications
Motor Power
9.25 Amp / 110 Volt
Weight
24 lbs.
Hole Capacity
11/2" dia.
Speed
440 RPM
Magnet Base Size
61/2" L x 31/4" W
Dimensions
13" H x 91/2" L x 7" W
Magnetic Force (1" plate)
2640 lbs.
Arbor Bore
3/4"
Automatic Lubrication
Included
* 220 Volt / 50 Hz also available
Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Steel shipping case†
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
Standard
Equipment
also includes
auto lubrication,
safety strap,
carabin hook,
gloves, safety
glasses, ear
protection and
allen keys.
† Steel
case intended
mainly for shipping
purposes; damage
may occur in transit.
1 Warranty certificate
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
9
MAB 150
PORTABLE MAGNETIC DRILLS
Cutter capacity
1 1/2" dia.
Made in Germany
Powered by
Horizontal motor mount for drilling in tight spaces
Internal
cable routing
protects the motor
power cord from
external damage
Powerful • Reliable
• 9.25 Amp doubleinsulated motor
• Ultra compact, 7" high
• Lightweight, 24 lbs.
• Designed for continuous use
• Intelligent electronic torque
control
Drill up to 1-1/2" dia.*
• Uses annular cutters
• Integrated cutting oil reservoir
• Automatic internal lubrication
Integrated Safety
• Internal cable routing
• Simple, ergonomic arrangement
of controls for one-handed
operation
MAB 150 uses standard
3/4" shank annular cutters
Automatic internal
lubrication with
pressure pump bottle
Optional ratchet-style
advancing mechanism
for work in spaces with
limited clearance.
(14mm square drive)
* Model MAB 150 accepts cutters with a 3/4" weldon
shank and a maximum depth of cut of 1".
Cutter Capacity
ø 11/2"
Stroke
(length)
1"
Speed Range
(RPM)
Switches for power
and magnet adhesion
are arranged for
simple,
uncomplicated
operation.
400
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
10
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
MAB 150
Specifications
Made in Germany
Powered by
12.87"
7.09"
7.44"
1.73"
1.30"
3.15"
6.30"
Advancing lever can be mounted on either
the left or right side of the MAB 150.
Model MAB 150
Model MAB 150 Specifications
Motor Power
9.25 Amp / 110 Volt
Weight
24 lbs.
Hole Capacity
11/2" dia.
Speed
400 RPM
Magnet Base Size
65/16" L x 33/16" W
Dimensions
7" H x 127/8" L x 71/2" W
Magnetic Force (1" plate)
2640 lbs.
Arbor Bore
3/4"
Automatic Lubrication
Included
Model MAB 150 accepts cutters with
3/4" weldon shank. This unit has a
maximum depth of cut of 1".
PORTABLE MAGNETIC DRILLS
Cutter capacity
1 1/2" dia.
See pages 32-39 for our HSS, TiAlN
and Carbide-tipped cutters.
* 220 Volt / 50 Hz also available
Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Steel shipping case†
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
Standard
Equipment
also includes
auto lubrication,
safety strap,
carabin hook,
gloves, safety
glasses, ear
protection and
allen keys.
† Steel
case intended
mainly for shipping
purposes; damage
may occur in transit.
1 Warranty certificate
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
11
MAB 425
PORTABLE MAGNETIC DRILLS
Cutter capacity
1 3/8" dia.
Made in Germany
Powered by
High speed and two gears for cutting and twist drilling
Internal
cable routing
protects the motor
power cord from
external damage
Powerful • Reliable
• 9.25 Amp doubleinsulated motor
• 15-1/2" high, 29 lbs.
• High-speed, 2-speed gearbox,
ideal for annular cutters and
twist drills
• Designed for continuous use
• Intelligent electronic torque
control
71/2"
stroke
Drill up to 1-3/8" dia.
• Uses annular cutters
• Twist drilling up to 5/8" diameter
with optional chuck (IBC 17)
• Integrated cutting oil reservoir
• Automatic internal lubrication
With a 1/2" chuck (Part No.
IBC 17), this model easily
converts to a standard drill
press with a 7 1/2" stroke for
conventional twist drills.
Integrated Safety
• Green/Red LED magnetic force
indicator for safe operation
• Internal cable routing
• Simple, ergonomic arrangement
of controls for one-handed
operation
• Emergency-off function
The high speed of the MAB 425 is a great match for
the TCT Hornet series of sintered carbide annular
cutters. See page 38-39 for more information.
Equipped with Electronic
Safety Shutoff Sensor (see p. 3)
Cutter Capacity
Twist Drill /
Countersink
Stroke
(length)
Speed Range
(RPM)
Magnet Force
Indicator
ø 13/8"
ø 5/8"
61/3"
430 / 760
SafeMag™
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
12
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
MAB 425
Specifications
Made in Germany
Powered by
Cutter capacity
1 3/8" dia.
14.61"
15.47 - 21.46"
1.22"
2.40"
PORTABLE MAGNETIC DRILLS
6.30"
11.50"
3.31"
6.61"
Model MAB 425
Model MAB 425 Specifications
Motor Power
9.25 Amp / 110 Volt
Weight
29 lbs.
Hole Capacity
13/8" dia.
Twist Drill Capacity
5/8" dia.
Speeds
430 / 760 (2 gears)
Magnet Base Size
31/3" W x 65/8" L
Dimensions
151/2" H x 111/2" L x 61/3" W
Magnetic Force (1" plate)
3080 lbs.
Arbor Bore
3/4"
Automatic Lubrication
Included
* 220 Volt / 50 Hz also available
Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Molded plastic carrying case
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
1 Warranty certificate
Standard
Equipment
also includes
auto lubrication,
safety strap,
carabin hook,
gloves, safety
glasses, ear
protection and
allen keys.
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
13
MAB 455
PORTABLE MAGNETIC DRILLS
Cutter capacity
2" dia.
Made in Germany
Powered by
High power with keyless quick-change chuck system
Internal
cable routing
protects the motor
power cord from
external damage
Powerful • Reliable
• 10.5 Amp doubleinsulated motor
• 17-1/4" high, 29 lbs.
• High-speed, 2-speed gearbox,
ideal for annular cutters and
twist drills
• Designed for continuous use
• Intelligent electronic torque
control
Drill up to 2" dia.
• Uses annular cutters
• Twist drilling up to 7/8"
(with optional chuck IBC 22)
• Integrated cutting oil reservoir
With a 3/4" chuck (Part No.
IBC 22), or MT2, this model
easily converts to a standard
drill press with a 5" stroke for
conventional twist drills.
• Automatic internal lubrication
Keyless Cutter Mount
• Quick-change keyless cutter
system for 3/4" Weldon shank
Integrated Safety
• Green/Red LED magnetic
force indicator for safe
operation
• Internal cable routing
Equipped with Electronic
Safety Shutoff Sensor (see p. 3)
• Simple, ergonomic
arrangement of controls for
one-handed operation
• Emergency-off function
Cutter Capacity
Twist Drill /
Countersink
Stroke
(length)
Two-Speed
(RPM)
Magnet Force
Indicator
ø 2"
ø 7/8"
61/3"
250 / 450
SafeMag™
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
14
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
MAB 455
Specifications
Made in Germany
Powered by
Cutter capacity
2" dia.
11.61"
PORTABLE MAGNETIC DRILLS
3.46"
14.61"
17.24 - 23.54"
7.01"
1.50"
2.24"
3.31"
6.61"
Model MAB 455
Model MAB 455 Specifications
Motor Power
10.5 Amp / 110 Volt
Weight
29 lbs.
Hole Capacity
2" dia.
Twist Drill Capacity
7/8" dia.
Speeds
250 / 450 RPM (2 gears)
Magnet Base Size
31/3" W x 65/8" L
Dimensions
171/4" H x 115/8" L x 7" W
Magnetic Force (1" plate)
3750 lbs.
Arbor Bore
3/4"
Spindle
MT2
Automatic Lubrication
Included
* 220 Volt / 50 Hz also available
Standard
Equipment
also includes
molded plastic
carrying case,
operating
manual, auto
lubrication,
safety strap,
carabin hook,
gloves, safety
glasses, ear
protection and
allen keys.
Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESS Weldon 3/4"
2 Pilot pins - 1" and 2" depth
1 Safety chain
1 Drift key MT2
1 Warranty certificate
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
15
MAB 485
PORTABLE MAGNETIC DRILLS
Cutter capacity
2" dia.
Made in Germany
Powered by
Versatile for workshop and assembly applications
Powerful • Reliable
Integrated Safety
• 10.5 Amp doubleinsulated motor
• Green/Red LED magnetic force
indicator for safe operation
• 17-1/4" high, 29 lbs.
• Internal cable routing
• High-speed, variable-speed
oilbath gearbox, ideal for
annular cutters and twist drills
• Simple, ergonomic
arrangement of controls for
one-handed operation
• Designed for continuous use
• Emergency-off function
• Intelligent electronic torque
control
Internal
cable routing
protects the motor
power cord from
external damage
Drill up to 2" dia.
Tap up to 15/16" dia.
• Uses annular cutters
• Twist drilling up to 7/8" dia.
(with optional chuck IBC 22)
Equipped with Electronic
Safety Shutoff Sensor (see p. 3)
• Tapping capacity 3/16"
to 15/16" dia.
• Integrated cutting oil reservoir
• Automatic internal lubrication
Keyless Cutter Mount
• Quick-change keyless cutter
system for 3/4" Weldon shank
Optional Geared Chuck
With a 3/4" chuck (Part No. IBC 22), or MT2, this
model easily converts to a standard drill press
with a 5" stroke for conventional twist drills.
Cutter Capacity
Twist Drill /
Countersink
Ream /
Tap
Stroke
(length)
2-gear Variable
Speed (RPM)
ø 2"
ø 7/8" / ø 19/16
ø 3/4" /
ø 15/16"
61/3"
50-250
100-450
Electronics
Overheat
Protection
Variable-speed CoolMag™
Control
Magnet Force
Indicator
SafeMag™
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
16
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Reversible
(CW/CCW)
MAB 485
Specifications
Made in Germany
Powered by
Cutter capacity
2" dia.
3.46"
14.61"
17.24 - 23.54"
PORTABLE MAGNETIC DRILLS
7.01"
11.61"
1.50"
2.24"
3.31"
6.61"
Model MAB 485
Model MAB 485 Specifications
Motor Power
10.5 Amp / 110 Volt
Weight
29 lbs.
Hole Capacity
2" dia.
Twist Drill Capacity
7/8" dia.
Tapping Capacity
15/16" dia.
Speeds
50-250 and 100-450 RPM
Magnet Base Size
31/3" W x 65/8" L
Dimensions
171/4" H x 115/8" L x 7" W
Magnetic Force (1" plate)
3750 lbs.
Arbor Bore
3/4"
Spindle
MT2
Automatic Lubrication
Included
* 220 Volt / 50 Hz also available
Standard Equipment
Standard
Equipment
also includes
molded plastic
carrying case,
operating
manual, auto
lubrication,
safety strap,
carabin hook,
gloves, safety
glasses, ear
protection and
allen keys.
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESS Weldon 3/4"
2 Pilot pins - 1" and 2" depth
1 Safety chain
1 Drift key MT2
1 Geared drill chuck with MT2
Tap collet adapters - 3/8", 1/2"
and 3/4"
1 Warranty certificate
Shown with optional Pipe Saddle Clamp
System for safe, secure drilling of pipes and
tubular material. See page 48 for details.
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
17
MAB 525
PORTABLE MAGNETIC DRILLS
Cutter capacity
2 1/2" dia.
Made in Germany
Powered by
High power, ideal for production use
Internal
cable routing
protects the motor
power cord from
external damage
Powerful • Reliable
• 14.5 Amp doubleinsulated motor
• 19" high, 35 lbs.
• High-speed, 2-speed oilbath
gearbox, ideal for annular
cutters and twist drills
Equipped with Electronic
Safety Shutoff Sensor (see p. 3)
• Designed for continuous use
• Intelligent electronic torque
control
With a 3/4"
chuck (Part No.
IBC 21), or MT3,
this model easily
converts to a
standard drill
press with a 5"
stroke for
conventional
twist drills.
Drill up to 2-1/2" dia.
Tap up to 15/16" dia.
• Uses annular cutters
• Twist drilling up to 1"
(with optional chuck IBC 21)
• Tapping capacity 15/16"
• Integrated cutting oil reservoir
• Automatic internal lubrication
Keyless Cutter Mount
• Quick-change keyless cutter
system for 3/4" Weldon shank
Integrated Safety
• Green/Red LED magnetic force indicator for safe operation
• Internal cable routing
• Simple, ergonomic arrangement of controls for one-handed operation
• Emergency-off function
Cutter Capacity
Twist Drill /
Countersink
Ream /
Tap
Stroke
(length)
2-gear Variable
Speed (RPM)
ø 21/2"
ø 1" / ø 2"
ø 7/8" /
ø 15/16"
61/3"
70-280
180-580
Electronics
Overheat
Protection
Variable-speed CoolMag™
Control
Magnet Force
Indicator
Reversible
(CW/CCW)
SafeMag™
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
18
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
MAB 525
Specifications
Made in Germany
Powered by
Cutter capacity
2 1/2" dia.
3.54”
14.60”
19.17 - 25.08”
PORTABLE MAGNETIC DRILLS
6.73”
11.65”
1.33”
2.08”
3.54”
7.09”
Model MAB 525
Model MAB 525 Specifications
Motor Power
14.5 Amp / 110 Volt
Weight
35 lbs.
Hole Capacity
21/2" dia.
Twist Drill Capacity
1" dia.
Tapping Capacity
15/16" dia.
Speeds
70-280 and 180-580 RPM
Magnet Base Size
31/2" W x 71/8" L
Dimensions
19" H x 113/4" L x 63/4" W
Magnetic Force (1" plate)
8000 lbs.
Arbor Bore
3/4"
Spindle
MT3
Automatic Lubrication
Included
* 220 Volt / 50 Hz also available
Standard Equipment
Standard
Equipment
also includes
molded plastic
carrying case,
operating
manual, auto
lubrication,
safety strap,
carabin hook,
gloves, safety
glasses, ear
protection and
allen keys.
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESS Weldon 3/4"
2 Pilot pins - 1" and 2" depth
1 Safety chain
1 Drift key MT3
1 Geared drill chuck with MT3
Tap collet adapters - 1/4", 3/8",
1/2" and 3/4"
1 Warranty certificate
See pages 32-39 for our HSS, TiAlN
and Carbide-tipped cutters.
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
19
MAB 825 & MAB 845
PORTABLE MAGNETIC DRILLS
Cutter capacity
4" dia.
Made in Germany
Powered by
Ideal for steel engineering, plant construction and more
Powerful • Reliable
Internal
cable routing
protects the motor
power cord from
external damage
• 16 Amp double-insulated motor
• 4-speed oilbath gearbox for
applications requiring high
power
4 Gears
with Variable
Speed
• Designed for continuous use
• Infinitely variable torque
control and full-wave
control electronics
Drill up to 4" dia.
Tap up to 1-1/8" dia.
Twist Drilling
• Uses annular cutters
• Twist drilling and reaming
up to 1-1/4" dia.
• Tapping up to 1-1/8"
• Optional geared chuck IBC 21
• Integrated cutting oil reservoir
Tapping
• Automatic internal lubrication
• Swivel base (model MAB 845)
Keyless Cutter Mount
• Quick-change keyless cutter
system for 3/4" Weldon shank
MAB 825
For swivel
base, order
MAB 845
(see page 21)
• Arbor for 1-1/4" Weldon shank
Integrated Safety
Reaming
• Green/Red LED magnetic force
indicator for safe operation
• Internal cable routing
Equipped with Electronic
Safety Shutoff Sensor (see p. 3)
• Simple, ergonomic arrangement
of controls for one-handed operation
Countersinking
• Emergency-off function
20
Cutter Capacity
Twist Drill /
Countersink
Ream / Tap
Stroke
(length)
4-gear Variable
Speed (RPM)
ø 4"
ø 11/4" / ø 2"
ø 11/4" / ø 11/8"
10"
40-110
65-175
140-360
220-600
1-800-700-5919
•
•
Electronics
Overheat
Protection
Variable-speed CoolMag™
Control
Magnet Force
Indicator
Reversible
(CW/CCW)
SafeMag™
Visit our Web site at www.csunitec.com
14.41"
Specifications
Made in Germany
Powered by
Cutter capacity
4" dia.
22.05"
18.70 - 28.54"
9.41"
1.85"
2.58"
1.65"
8.66"
4.33"
Model MAB 825 & 845
Model MAB 825 & 845 Specifications
Motor Power
16 Amp / 110 Volt
Weight
55 lbs.
Hole Capacity
4" dia.
Twist Drill Capacity
11/4" dia.
Tapping Capacity
11/8" dia.
Speeds
40-110, 65-175
140-360, 220-600 RPM
Magnet Base Size
41/3" W x 85/8" L
Dimensions
185/8" H x 147/16" L x 97/16" W
Magnetic Force (1" plate)
6600 lbs.
Arbor Bore
3/4"
Spindle
MT3
Automatic Lubrication
Included
Swivel Base
Order MAB 845
30°
and 11/4", standard
PORTABLE MAGNETIC DRILLS
MAB 825 & MAB 845
3/4"
Model MAB 845 features a swivel
base providing 30˚ movement left
and right and 3/4" forward and
backward.
* 220 Volt / 50 Hz also available
Rolling Transport Case
Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESS Weldon 3/4"
1 Arbor 11/4" Weldon, MT3
4 Pilot pins - 1", 2", 3" and 4" depth
1 Safety chain
1 Hexagon socket screw key SW 6
1 Drift key MT3
Standard
Equipment
also includes
operating
manual, auto
lubrication,
safety strap,
carabin hook,
gloves, safety
glasses, ear
protection and
allen keys.
Optional robust transport case with
wheels, carrying handle and sturdy
closures. Protect your MAB
825/845 from water and dust with
this rugged case.
Order No. ZHK 825
1 Warranty certificate
1 Carrying case
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
21
MAB 1300
PORTABLE MAGNETIC DRILLS
Cutter capacity
5 1/8" dia.
Made in Germany
Powered by
Large holes – up to 5 1/8" diameter
Tapping up to 1 5/8" diameter
4 Gears
with Variable
Speed
Powerful • Reliable
• 20 Amp double-insulated motor
Equipped with
Electronic
Safety Shutoff
Sensor (see p. 3)
• 34-1/2" high, 112 lbs.
• 4-speed oilbath gearbox for
applications requiring high power
• Designed for continuous use
• Infinitely variable torque control
and full-wave control electronics
Twist Drilling
Drill up to 5-1/8" dia.
Tap up to 1-5/8" dia.
• Uses annular cutters
7/16" to 5-1/8" dia., 1" and 2" depth
13/16" to 4-3/4" dia. for 4" depth
Tapping
• Twist drilling up to 1-3/4" - uses
MT4, countersinking up to 3" dia.
• Tapping up to 1-5/8"
• Reaming up to 2"
• Automatic internal lubrication
Reaming
Integrated Safety
• Green/Red LED magnetic force
indicator for safe operation
• Equipped with Electronic Safety
Shutoff Sensor (see p. 3)
Countersinking
• Emergency-off function
Ideal for use with
TCT Carbide cutters
up to 51/8" dia. –
see pages 38-39.
22
Optional
Special-Purpose
Cutting Tool
Cutter Capacity
Twist Drill /
Countersink
Ream / Tap
Stroke
(length)
4-gear Variable
Speed (RPM)
ø 5-1/8"
ø 1-3/4" / ø 3"
ø 2" / ø 1-5/8"
3.35"
(12" without
retainer)
30-80
50-120
130-350
210-550
•
1-800-700-5919
•
Electronics
Overheat
Protection
Variable-speed CoolMag™
Control
Magnet Force
Indicator
Reversible
(CW/CCW)
SafeMag™
Visit our Web site at www.csunitec.com
MAB 1300
Specifications
19.5"
Made in Germany
Powered by
Cutter capacity
5 1/8" dia.
PORTABLE MAGNETIC DRILLS
27"
22.05 - 34.45"
10"
2"
3.26"
4.72"
14.17"
Model MAB 1300
Model MAB 1300 Specifications
Motor Power
20 Amp / 110 Volt
Weight
112 lbs.
Hole Capacity
51/8" dia.**
Twist Drill Capacity
13/4" dia.
Tapping Capacity
15/8" dia.
Speeds
30-80, 50-120
130-350, 210-550 RPM
Magnet Base Size
43/4" W x 14" L
Dimensions
341/2" H x 191/2" L x 10" W
Magnetic Force (1" plate)
23,600 lbs.
Arbor Bore
11/4" (3/4" adapter included)
Spindle
MT4
Automatic Lubrication
Included
Accessories
See page 24
for tapping
accessories
and wheeled
carrying case.
* 220 Volt / 50 Hz also available
** Maximum hole diameter is with TCT Carbide cutters - see p. 38-39.
Standard Equipment
1 Magnetic drilling machine
1 Carrying case on wheels
1 Arbor adapter to 3/4" Weldon
1 Safety chain
1 Hexagon socket screw key SW6
1 Drift key MT4
1 Operating manual
1 Warranty certificate
Standard
Equipment
also includes
auto lubrication,
safety strap,
carabin hook,
gloves, safety
glasses, ear
protection and
allen keys.
ZHK 1300
wheeled
carrying case
included with
MAB 1300
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
23
MAB 1300
PORTABLE MAGNETIC DRILLS
Cutter capacity
5 1/8" dia.
Accessories
Made in Germany
Powered by
Heavy-duty Tap Holder
• Positive, accurate driving of larger-sized taps
• No slippage or tap damage
• Tap shank square engages with square drive socket
• 3 set screws secure tap in holder
See page 41
for additional
tapping options.
Order
Number
Morse
Taper
Tap
Size
Tap Shank
Diameter
Tap Shank
Square
70308
70301
70302
70303
70304
70403
70404
70405
70406
70407
70408
3
3
3
3
3
4
4
4
4
4
4
5/8"
3/4"
7/8"
1"
1-1/8"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
.480
.590
.697
.800
.896
.800
.896
1.021
1.108
1.233
1.305
.366
.442
.523
.600
.672
.600
.672
.766
.831
.925
.979
Tap Collets and Reducing Adapters
Tap Collets with 3/4" or 1-1/4" Weldon shank
all threads shown are ASA Standard (or DIN 376 for metric)
Thread Order No.
Thread Order No.
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
1
ZGT-1/4
ZGT-5/16
ZGT-3/8
ZGT-7/16
ZGT-1/2
ZGT-9/16
ZGT-5/8
ZGT-11/16
ZGT-3/4
ZGA 033
(1-1/4" Weldon shank)
1-1/4
ZGA 042
(1-1/4" Weldon shank)
Bushing – Reduces
1-1/4" Weldon shank to
3/4" Weldon shank
Order No. ZAP 200
Reducing Sleeve
DIN 2185
Order No. ZRH 430 for MT 4:3
(adapts MT4 to MT3)
Rolling Transport Case for MAB 1300
Order No. ZHK 1300
Robust transport case with wheels, carrying handle and
sturdy closures. Protect your investment from water and
dust with this rugged case. Four large ABS locks and an
interior configuration customized for machine to secure
drill and accessories during
transit. Lightweight, heavyduty plastic construction
and robust ABS wheels.
Drill not included with
ZHK 1300. Purchase of
MAB 1300 drill includes
ZHK 1300 case.
See page 21 for
MAB 825/845 case.
Four large ABS locks secure
the robust plastic case
Watertight, shock-proof and robust –
the right protection for your machine.
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
24
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
AutoMAB 1500
Made in Germany
Powered by
Powerful • Reliable
• 10.5 Amp doubleinsulated motor
• Compact, lightweight and
portable: 16-1/8" high,
37-1/2 lbs.
• Power feed automatically
controls drill pressure to
maintain optimal RPM and feed
rate
Integrated Safety
• Designed for continuous use
• Internal cable routing
• Ideal hole cutting machine for
steel fabricators, contractors
and plant maintenance
professionals
• Simple, ergonomic
arrangement of controls for
one-handed operation
• Emergency-off function
Drill up to 1-1/2" dia.
• Uses annular cutters
• Automatic feed mechanism
with automatic stop and
manual retraction
• Integrated cutting oil reservoir
• Automatic internal lubrication
Standard
Equipment
also includes auto
lubrication, safety
strap, carabin hook,
gloves, safety glasses,
ear protection and
allen keys.
Standard Equipment
1 Magnetic drilling machine
1 Steel carrying case†
1 Safety chain
1 Operating manual
† Steel
case intended
mainly for shipping
purposes; damage
may occur in transit.
1 Warranty certificate
Cutter Capacity
Stroke
(length)
Speed Range
(RPM)
PORTABLE MAGNETIC DRILLS
Cutter capacity
1 1/2" dia.
Heavy-duty compact drill with automatic feed
Model AutoMAB 1500 Specifications
Motor Power
10.5 Amp / 110 Volt
Weight
371/2 lbs.
Hole Capacity
11/2" dia.
Speed
360 RPM
Magnet Base Size
31/2" W x 71/8"
Dimensions
161/8" H x 11" L x 713/16" W
Magnetic Force (1" plate)
2640 lbs.
Arbor Bore
3/4"
Automatic Lubrication
Included
* 220 Volt / 50 Hz also available
ø
11/2"
3"
360
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
25
CSU 32AC & CSU 32RL
PORTABLE MAGNETIC DRILLS
Cutter capacity
1 1/4" dia.
Best power-to-weight performance in the industry
Powerful • Reliable
Integrated Safety
• Strong 8.2 Amp motor
• SafeMag™ Green/Red LED
magnetic force indicator for safe
operation
• Compact, lightweight and
portable – 14-1/4" high, 24 lbs.
• Designed for continuous use
• Equipped with CoolMag™ overheat
protection
• Model CSU 32RL variable speed
• Emergency-off function
Drill up to 1-1/4" dia.
• Uses annular cutters; 5-3/4" stroke
• Twist drilling up to 1/2" dia.;
7-1/2" stroke with chuck
• Tapping up to 3/4" dia.*
• Automatic lubrication system
With a 1/2" chuck (Part
No. IBC 17), these
models easily convert to
standard drill presses
with a 6 1/2" stroke for
conventional twist drills.
Model CSU 32RL
has a variable-speed
(100-450 RPM),
reversible motor for
tapping up to 3/4"
CSU 32AC Specifications
Tap collet set included
with Model CSU 32RL
Motor Power
8.2 Amp / 110 Volt
Weight
24 lbs.
Hole Capacity
11/4" dia.
Twist Drill Capacity
1/2" dia.
Tapping Capacity
3/4" (CSU 32RL only)
Speed
450 RPM
Magnet Base Size
65/16" W x 31/4" H
Dimensions
141/4" H x 91/2" L x 43/8" W
Magnetic Force (1" plate) 3080 lbs.
Standard Equipment includes auto
lubrication, auto chuck cutter holder,
1/2" geared chuck, safety chain,
carabin hook, allen keys, pilot pins and
carrying case. (CSU 32AC shown)
Arbor Bore
3/4"
Spindle
1/2"-20 UNF Thread
Automatic Lubrication
Included
Reversible Motor
Order CSU 32RL
Power Assist
Order Accessory ZPA 401
* Model CSU 32RL for tapping up to 3/4" dia.
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
26
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
CSU 50AC & CSU 50RL
Cutter capacity
2" dia.
Lightweight, two-speed, high-performance drills
Integrated Safety
• Strong 10.5 Amp motor
• Compact, lightweight and
portable – 16-1/2" high, 29 lbs.
• 2-gear variable speed gearbox
• Designed for continuous use
• SafeMag™ Green/Red LED
magnetic force indicator for safe
operation
Drill up to 2" dia.
• Emergency-off function
• Equipped with CoolMag™ overheat
protection
• Uses annular cutters; 10" stroke
• Twist drilling up to 7/8" dia.
• Tapping up to 15/16" dia.*
• Automatic lubrication system
Keyless Cutter Mount
• Easy "twist and lock" keyless arbor
With a 3/4" chuck (Part No.
IBC 22) or MT2, these
models easily convert to
standard drill presses with
a 5" stroke for
conventional twist drills.
Model CSU 50RL
has a variable-speed,
reversible motor for
tapping up to 15/16"
Optional quick-change tapping
chuck with MT2 connection
(Model GSW.222) has flexible
collet to fit taps 5/16" to 5/8"
PORTABLE MAGNETIC DRILLS
Powerful • Reliable
CSU 50AC Specifications
Tap collet set included
with Model CSU 50RL
Motor Power
10.5 Amp / 110 Volt
Weight
29 lbs.
Hole Capacity
2" dia.
Twist Drill Capacity
7/8" dia.
Tapping Capacity
15/16" (CSU 50RL only)
Speeds
1: 250 RPM, 2: 450 RPM
Magnet Base Size
61/2" W x 31/2" H
Dimensions
161/2" H x 9" L x 63/8" W
Magnetic Force (1" plate) 3750 lbs.
Standard Equipment includes auto lubrication, auto
chuck cutter holder, 1/2" geared chuck, safety chain,
carabin hook, allen keys, pilot pins and carrying case.
(CSU 50RL shown)
•
1-800-700-5919
Arbor Bore
3/4"
Spindle
MT2
Automatic Lubrication
Included
Reversible Motor
Order CSU 50RL
Power Assist
Order Accessory ZPA 401
* Model CSU 50RL for tapping up to 15/16" dia.
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
Visit our Web site at www.csunitec.com
27
CSU 80AC
PORTABLE MAGNETIC DRILLS
Cutter capacity
3 3/16" dia.
Made in Germany
Powered by
Powerful high-torque motor with multiple speeds
Powerful • Reliable
Integrated Safety
• 15 Amp double-insulated motor
• SafeMag™ Green/Red LED
magnetic force indicator for safe
operation
• 19-1/2" high, 57 lbs.
• High-speed, 4-speed gearbox,
ideal for annular cutters and
twist drills
• Equipped with CoolMag™ overheat
protection
• Emergency-off function
• Designed for continuous use
Drill up to 3-3/16" dia.
• Uses annular cutters; 10" stroke
• Twist drilling up to 1-1/4" (with
optional chuck IBC 21); 6-1/2"
stroke
• Automatic lubrication system
Keyless Cutter Mount
• Quick-change keyless cutter
system for 3/4" Weldon shank
With a 3/4" chuck (Part No. IBC 21)
or MT3, this model easily converts
to a standard drill press with a
stroke of 6 1/2".
CSU 80AC Specifications
Standard Equipment includes auto
lubrication, auto chuck cutter holder,
safety chain, carabin hook, allen keys,
pilot pins and carrying case†.
Motor Power
15 Amp / 110 Volt*
Weight
57 lbs.
Hole Capacity
33/16" dia.
Twist Drill Capacity
11/4" dia.
Speeds
1: 100 RPM, 2: 175 RPM
3: 245 RPM, 4: 385 RPM
Magnet Base Size
9" W x 43/8" H
Dimensions
191/2" H x 133/8" L x 71/2" W
Magnetic Force (1" plate) 7040 lbs.
† Steel
case intended mainly for shipping
purposes; damage may occur in transit.
Arbor Bore
3/4"
(11/4" also available)
Spindle
MT3
Automatic Lubrication
Included
Power Assist
Order Accessory ZPA 402
* 220 Volt / 50 Hz also available
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
28
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
CSU 100/3RL
Made in Germany
Powered by
2 Gears
with Variable
Speed
Powerful • Reliable
• 16 Amp double-insulated motor
• 19-1/2" high, 57 lbs.
• 2-gear variable speed gearbox
• Designed for continuous use
Drill up to 4" dia.
• Uses annular cutters; 10" stroke
Twist Drilling
Tapping
Reaming
Countersinking
• Twist drilling up to 1-1/4" dia.;
6-1/2" stroke with geared chuck
• Tapping up to 1-1/8" dia.
• Automatic lubrication system
Keyless Cutter Mount
• Quick-change keyless cutter
system for 3/4" Weldon shank
• Optional 1-1/4" arbor
Optional quick-change
tapping chuck with MT2
connection (Model GSW.222)
has flexible collet to fit taps
5/16" to 5/8"
Integrated Safety
• SafeMag™ Green/Red LED
magnetic force indicator for safe
operation
PORTABLE MAGNETIC DRILLS
Cutter capacity
4" dia.
Powerful reversible motor for drilling and tapping
• Equipped with CoolMag™ overheat
protection
CSU 100/3RL Specifications
• Emergency-off function
Motor Power
16 Amp / 110 Volt*
Weight
57 lbs.
Hole Capacity
4" dia.
Twist Drill Capacity
11/4" dia.
Tapping Capacity
11/8" dia.
Speeds (variable)
40-140 RPM, 120-480 RPM
Magnet Base Size
9" W x 4" H
Dimensions
191/2" H x 133/8" L x 71/2" W
Magnetic Force (1" plate) 6600 lbs.
Standard Equipment includes auto
lubrication, auto chuck cutter holder,
safety chain, carabin hook, allen keys,
pilot pins and carrying case†.
Arbor Bore
3/4"
(11/4" also available)
Spindle
MT3
Automatic Lubrication
Included
Power Assist
Order Accessory ZPA 402
* 220 Volt / 50 Hz also available
† Steel
case intended mainly for shipping
purposes; damage may occur in transit.
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
29
AIRBOR™ AB-4300
Cutter capacity
2 1/16" dia.
Motor and magnet
are powered completely
by compressed air
Pneumatic power for hazardous environments
PORTABLE MAGNETIC DRILLS
ATEX Classified
Safe • Reliable
• Inherently safer than electromagnetic drills in
hazardous atmospheres and wet
environments where electricity requires
"hot work permits"
• ATEX classified
• Industry’s first completely air-operated
magnetic drill – NO ELECTRICITY!
• Fail-safe permanent magnet is
activated "on" and "off" by air
pressure; in the event of a loss of
air flow, the magnet will not
disengage
With a geared chuck
adapter (Part No. IBC 18) and
extra rack (Model No. AB4300-2R), AIRBOR™ easily
converts to a standard drill
press with a 7 1/2" stroke.
• 1600 lbs. magnet holding
Drill up to 2-1/16"
dia.
• Uses annular cutters
• Twist drilling up to 5/8"
• Powerful 1.6 HP drill motor
• Long drill stroke – up to 101/4"
• Pressurized coolant system lubricates cutter and
reduces risk of sparking
Pressurized
lubrication
system (Part No.
9 4002 0020)
Model AB-4300-2
Cutter Capacity
Twist Drill /
Countersink
Stroke
(length)
Speed Range
(RPM)
ø 21/16"
1/2"
Up to 101/4"
400
Model AB-4300-2 / AB-4300-2R Specifications
AB-4300-2R shown with extra rack up (left)
and extra rack down (right).
Model Comparison
AB-4300-2R
AB-4300-2
Drill Stroke
w/cutters
w/chuck
w/cutters
w/chuck
10 1/4"
7 1/2"
4 7/8"
1 3/4"
closed
open
closed
open
13 1/2"
22"
13 1/2"
17 1/2"
lbs.
kg
lbs.
kg
43
20
38
18
Height
Weight
Motor Power (Pneumatic)
1.6 HP
Air Consumption @ 90 PSI
64 CFM (1/2" NPT Air Connection)
Hole Capacity
21/16" dia.
No Load Speed
400 RPM
Magnet Base Size
83/4" W x 31/2" L
Dimensions
131/2" H x 121/2" L x 43/4" W
Magnetic Force (1" plate)
1600 lbs.
Arbor Bore
3/4"
Automatic Lubrication
Included
Stroke Length
47/8"
Order Model AB-4300-2
Stroke Length
101/4"
Order Model AB-4300-2R
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
30
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
HB 4400 for Subsea Drilling
Safe • Reliable
• Ideal for industrial, construction, marine
and mining applications
• Drill structural steel and other metals
• Hydraulic motor safe for underwater use
• Manually operated permanent magnet
with ratchet control has holding strength
of 1300 lbs.
Drill up to 2-1/16" dia.
• Uses annular cutters
With a 3/4"
chuck (Part No.
602045A), this
model easily
converts to a
standard drill
press with a 3"
stroke.
• Twist drilling up to 1/2" dia.
• Automatic lubrication
Cutter Capacity
Twist Drill /
Countersink
Stroke
(length)
Speed Range
(RPM)
PORTABLE MAGNETIC DRILLS
Cutter capacity
2 1/16" dia.
Hydraulic for marine and construction – works underwater
Model HB 4400
Hoses not included
ø 21/16"
1/2"
Up to 33/4"
0-630
Model HB 4400 Specifications
Motor Power (Hydraulic)
1.5 HP
Weight
481/2 lbs.
Hole Capacity
21/16" dia.
Twist Drill Capacity
1/2"
No Load Speed, Variable
0-630 RPM
Hydraulic Supply
Flow 6.5 GPM @ 2000 PSI
Magnet Base Size
71/4" W x 3" L
Dimensions
181/2" H x 121/2" L x 7" W
Magnetic Force (1" plate)
1300 lbs.
Automatic Lubrication
Included
dia.
➤ Annular Cutters: pages 32-39 ➤ Accessories: pages 40-48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
31
Annular Cutters
ANNULAR CUTTERS
Achieve burr-free finished holes, without predrilling or stepdrilling
Precision-ground flutes provide efficient chip clearance,
increasing drilling productivity and decreasing cutter breakage
Hardened, high-speed tool steel
Weldon Shank
Benefits of CS Unitec's Cutter Design:
Double-action tooth geometry cuts, splits
and ejects chips more efficiently,
• increasing cutting speed
• reducing tooth load
• minimizing tool wear
• lengthening cutter life
Engineered with a tapered inner
wall for smooth, easy slug ejection.
Center hole for
pilot pin accurately
aligns the cutter,
allows for internal
lubrication and
removes the slug.
Perfect drilling to close tolerances without runout.
The result: a burr-free finished hole.
32
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Pilot Pins: How they work…
2: Oiling
3: Ejecting
During drilling, the pilot
pin retracts and allows
internal coolant to reach
the cutting teeth.
When hole is complete,
the slug is automatically
ejected from the cutter.
ANNULAR CUTTERS
1: Centering
The pilot pin accurately
centers cutter over area
to be drilled.
6-Series HSS Unibroach™ Annular Cutters – Pages 34-35
Fully ground HSS annular cutters
Cutting depth:
1"
2"
Drilling ø:
7/16" - 5-1/8"
7/16" - 5-1/8"
3"
3/4" - 5-1/8"
4"
3/4" - 5-1/8"
8-Series ARMOR-PLATED Unibroach™ Annular Cutters – Pages 36-37
Fully ground HSS annular cutters with TiAlN hard coating
Cutting depth:
1"
2"
3"
Drilling ø:
7/16" - 5-1/8"
7/16" - 5-1/8"
3/4" - 5-1/8"
9-Series Unibroach™ TCT Hornet Annular Cutters – Pages 38-39
Sintered carbide annular cutters with Tungsten Carbide tips
Cutting depth:
1"*
2-3/8"
3-3/8"
Drilling ø:
1/2" - 2"
1/2" - 5-1/8"
3/4" - 5-1/8"
* 1-3/8" depth for diameters larger than 1-1/2"
For Cobalt Cutters and special sizes, see page 38.
➤ See pages 40-48 for Drill Accessories.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
33
®
Unibroach Annular Cutters
ANNULAR CUTTERS
High-speed steel for drilling 3x faster than twist drills
Annular Cutters are the standard hole-making drills in the
industry. Ideal for heavy-duty use on-site or in the shop, our
HSS Unibroach™ cutters are available in the following sizes:
1" drill depth – ø 7/16" to ø 51/8"
2" drill depth – ø 7/16" to ø 51/8"
3" drill depth – ø 3/4" to ø 51/8"
Special sizes available
• Metric cutters available on request
• CNC precision ground for fast penetration, accuracy and
long life
• Flutes run the length of the cutter for efficient chip
clearance, increased drilling productivity and
decreased cutter breakage
• Drill holes 3 times faster than twist drills
• Produce reamed-quality, burr-free holes and solid slugs
• Reduce machine size and weight
• Cutting edges are resharpenable
• Eliminate time-consuming, costly pilot holes and step drilling
See page 44 for HSS Annular Cutter Starter Kit.
* HSS Cutters must be used with lubricant.
See page 40 for CS Unitec lubricants and cutting oil.
Unibroach® Stack Cutters are available in diameters from 7/16" to 1 1/8" in 1", 2" and 3" depths. Drill multiple layers
of steel without stopping to remove the center slug. Please contact us or consult our price list for more information.
34
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
6-Series HSS
2" Depth*
3" Depth**
Diameter
Order No.
Diameter
Order No.
Diameter
6-1-114
6-1-116
6-1-118
6-1-120
6-1-122
6-1-124
6-1-126
6-1-128
6-1-130
6-1-132
6-1-134
6-1-136
6-1-138
6-1-140
6-1-142
6-1-144
6-1-146
6-1-148
6-1-150
6-1-152
6-1-154
6-1-156
6-1-158
6-1-160
6-1-162
6-1-164
6-1-166
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
6-1-214
6-1-216
6-1-218
6-1-220
6-1-222
6-1-224
6-1-226
6-1-228
6-1-230
6-1-232
6-1-234
6-1-236
6-1-238
6-1-240
6-1-242
6-1-244
6-1-246
6-1-248
6-1-250
6-1-252
6-1-254
6-1-256
6-1-258
6-1-260
6-1-262
6-1-264
6-1-266
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
N/A
N/A
N/A
N/A
N/A
6-1-324
6-1-326
6-1-328
6-1-330
6-1-332
6-1-334
6-1-336
6-1-338
6-1-340
6-1-342
6-1-344
6-1-346
6-1-348
6-1-350
6-1-352
6-1-354
6-1-356
6-1-358
6-1-360
6-1-362
6-1-364
6-1-366
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
Shank size:
3/4" for cutters up to 3" dia.
1-1/4" for cutters 3-1/16" to 4" dia.
Cutter Kits
Each HSS steel cutter kit comes with the
following: 9/16",11/16", 13/16", 15/16",
1-1/16", pilot pin & carrying case.
Order No.
Description
6-1-001
6-1-002
1" depth Cutter Kit
2" depth Cutter Kit
ANNULAR CUTTERS
1" Depth*
Order No.
Pilot Pins for 6-Series
Order No.
Description
7-3-102
7-3-202
7-3-302
1/2" - 3" dia., 1" depth
1/2" - 3" dia., 2" depth
3/4" - 3" dia., 3" depth
* Cutters in shaded area above include a Pilot Pin.
For 3/4" Shanks
6-1-168
6-1-170
6-1-172
6-1-174
6-1-176
6-1-178
6-1-180
6-1-182
6-1-184
6-1-186
6-1-188
6-1-190
6-1-192
6-1-194
6-1-196
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
6-1-268
6-1-270
6-1-272
6-1-274
6-1-276
6-1-278
6-1-280
6-1-282
6-1-284
6-1-286
6-1-288
6-1-290
6-1-292
6-1-294
6-1-296
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
6-1-368
6-1-370
6-1-372
6-1-374
6-1-376
6-1-378
6-1-380
6-1-382
6-1-384
6-1-386
6-1-388
6-1-390
6-1-392
6-1-394
6-1-396
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
6-1-198
6-1-1100
6-1-1102
6-1-1104
6-1-1106
6-1-1108
6-1-1110
6-1-1112
6-1-1114
6-1-1116
6-1-1118
6-1-1120
6-1-1122
6-1-1124
6-1-1126
6-1-1128
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
6-1-298
6-1-2100
6-1-2102
6-1-2104
6-1-2106
6-1-2108
6-1-2110
6-1-2112
6-1-2114
6-1-2116
6-1-2118
6-1-2120
6-1-2122
6-1-2124
6-1-2126
6-1-2128
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
6-1-398
6-1-3100
6-1-3102
6-1-3104
6-1-3106
6-1-3108
6-1-3110
6-1-3112
6-1-3114
6-1-3116
6-1-3118
6-1-3120
6-1-3122
6-1-3124
6-1-3126
6-1-3128
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
For 1-1/4" Shanks
7-3-1002
7-3-2002
7-3-3002
3-1/16" - 5" dia., 1" depth
3-1/16" - 5" dia., 2" depth
3-1/16" - 5" dia., 3" depth
Option for Cutters 3" and 4" Depth
7-3-402
†
2-piece pin for 3" and 4" depth
cutters with 8mm pilot hole.
We also stock 4" depth HSS cutters and Metric
HSS cutters. Larger diameters and special sizes
available upon request. Please call us for pricing
and delivery.
** Cutters with 3" depth
have an 8mm dia.
pilot hole.
➤ See pages 40-48 for Drill Accessories.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
35
®
Unibroach Annular Cutters
ANNULAR CUTTERS
TiAlN coating for up to 4x tool life, less friction and more power
Less Friction = Less Heat = More Holes!
ARMOR-PLATED Unibroach™ Cutters, at 90Rc hardness, are the state-ofthe-art in hole cutting technology. They multiply service life, reduce cost and
increase productivity.
ARMOR-PLATED Unibroach™ cutters are available in the
following sizes:
1" drill depth – ø 7/16" to ø 51/8"
2" drill depth – ø 7/16" to ø 51/8"
3" drill depth – ø 3/4" to ø 51/8"
• Metric and larger diameter cutters available on request
• 3 to 4 times longer tool life with TiAlN coating
• Drill with less friction and more power
• Withstands higher working temperatures –
up to 1480˚F (800˚C)
• Dry drilling or lubricating with water simplifies
working conditions and cleanup*
• Prevents cold weld – metal chips do not adhere to the cutter
• Ideal for structural steel and hard metal
• 3/4" dia. shank (11/4" dia. shank available)
* After the TiAlN coating is worn, lubricate with cutting oil
See page 44 for ARMOR-PLATED Unibroach™
TiAlN Annular Cutter Starter Kit.
36
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
ARMOR-PLATED = Less Friction = Less Heat = More Holes!
Increase tool life and achieve faster feed rates
ARMOR-PLATED
Unibroach™ Cutters, at
90Rc hardness, are the
state-of-the-art in hole
cutting technology.
They multiply service
life, reduce cost and
increase productivity.
Shank size: 3/4" up to 3" dia.
1" Depth
Order No.
8-1-114 T
8-1-116 T
8-1-118 T
8-1-120 T
8-1-122 T
8-1-124 T
8-1-126 T
8-1-128 T
8-1-130 T
8-1-132 T
8-1-134 T
8-1-136 T
8-1-138 T
8-1-140 T
8-1-142 T
8-1-144 T
8-1-146 T
8-1-148 T
8-1-150 T
8-1-152 T
8-1-154 T
8-1-156 T
8-1-158 T
8-1-160 T
8-1-162 T
8-1-164 T
8-1-166 T
Diameter
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
2" Depth
Order No.
8-1-214 T
8-1-216 T
8-1-218 T
8-1-220 T
8-1-222 T
8-1-224 T
8-1-226 T
8-1-228 T
8-1-230 T
8-1-232 T
8-1-234 T
8-1-236 T
8-1-238 T
8-1-240 T
8-1-242 T
8-1-244 T
8-1-246 T
8-1-248 T
8-1-250 T
8-1-252 T
8-1-254 T
8-1-256 T
8-1-258 T
8-1-260 T
8-1-262 T
8-1-264 T
8-1-266 T
Diameter
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
3" Depth*
Order No.
Diameter
N/A
N/A
N/A
N/A
N/A
8-1-324 T
8-1-326 T
8-1-328 T
8-1-330 T
8-1-332 T
8-1-334 T
8-1-336 T
8-1-338 T
8-1-340 T
8-1-342 T
8-1-344 T
8-1-346 T
8-1-348 T
8-1-350 T
8-1-352 T
8-1-354 T
8-1-356 T
8-1-358 T
8-1-360 T
8-1-362 T
8-1-364 T
8-1-366 T
ARMOR-PLATED Cutter Kits
ANNULAR CUTTERS
8-Series ARMOR-PLATED TiAlN
Each armor-plated cutter kit comes with
the following: 9/16",11/16", 13/16", 15/16",
1-1/16", pilot pin & carrying case.
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
* Cutters with 3" depth
Order No.
Description
8-1-001 T
8-1-002 T
1" depth Cutter Kit
2" depth Cutter Kit
Pilot Pins for 8-Series
Order No.
Description
7-3-102
7-3-202
7-3-302
1/2" - 3" dia., 1" depth
1/2" - 3" dia., 2" depth
3/4" - 3" dia., 3" depth
For 3/4" Shanks
Option for Cutters 3" and 4" Depth
7-3-402
2-piece pin for 3" and 4" depth
cutters with 8mm pilot hole.
3"+ Diameter Cutters
Metric and larger diameter cutters
available on request.
have an 8mm dia.
pilot hole.
ARMOR-PLATED Unibroach™ TiAlN Cutters:
• Drill with less friction and more power
• Withstand higher working temperatures – up to 1480˚F (800˚C)
• Dry drill or lubricate with water to simplify working conditions and cleanup**
• Prevent cold weld – metal chips do not adhere to the cutter
• Are ideal for structural steel and hard metal
** After the TiAlN coating is worn, lubricate with cutting oil
➤ See pages 40-48 for Drill Accessories.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
37
®
Unibroach Annular Cutters
ANNULAR CUTTERS
Tungsten carbide-tipped for high-speed cutting
• Use high-speed RPM for best results
and faster holemaking
• Ideal for drilling steel with rust or paint
• Will outlast High-speed Steel cutters
• Leaves a burr-free finished hole
• Available in all sizes (fractional and metric)
• 3/4" or 11/4" shank
TCT Hornet cutters are available
in the following sizes:
1" drill depth – ø 1/2" to ø 11/2"
1-3/8" drill depth – ø 19/16" to ø 2"
2-3/8" drill depth – ø 1/2" to ø 51/8"
3-3/8" drill depth – ø 3/4" to ø 51/8"
Closeup of tungstencarbide teeth.
See following page for
part numbers.
• Metric cutters available on request
Carbide-Tipped Hole Saws
Cut holes in sheet metal up to 3/8" thick
• Tungsten carbide-tipped cutting edges last longer
and can be run at higher feeds and speeds to create
holes of exceptional quality and accuracy
• Diameters from 9/16" to 21/2"
• 3/8" (12mm) drilling depth; 1" (28mm) effective length
• Designed for use with portable drilling machines
• 1/2" and 3/4" hex shanks
Unibroach Cobalt Cutters
®
®
• Unibroach Cobalt Cutters are made with 5%
cobalt for increased wear resistance
• Excellent results when drilling high-tensile steel
and difficult-to-machine materials
• Available with TiAlN coating upon request
• Available for hole sizes up to 5" dia.
• 3/4" shank is standard
for cutters up to 3" dia.
• Metric cutters available
on request
• See our price list for
part numbers
Unibroach Large-diameter Hole Cutting
®
Drill perfect holes up to 51/8" diameter without runout
• Standard with 3/4" or 11/4" shank diameters
• More cutting teeth to distribute the load evenly –
increase tool life and achieve faster feed rates
• Use on milling machines, drill presses, CNC and other equipment
• A solid slug has a higher value for scrap metal
• Available in TCT Carbide, HSS, Cobalt and ARMOR-PLATED Unibroach™
38
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
9-Series - TCT Carbide Hornet
1" Depth
Diameter
9-1-116 C
9-1-118 C
9-1-120 C
9-1-122 C
9-1-124 C
9-1-126 C
9-1-128 C
9-1-130 C
9-1-132 C
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
Order No.
Diameter
9-1-216 C
9-1-218 C
9-1-220 C
9-1-222 C
9-1-224 C
9-1-226 C
9-1-228 C
9-1-230 C
9-1-232 C
9-1-234 C
9-1-236 C
9-1-238 C
9-1-240 C
9-1-242 C
9-1-244 C
9-1-246 C
9-1-248 C
9-1-250 C
9-1-252 C
9-1-254 C
9-1-256 C
9-1-258 C
9-1-260 C
9-1-262 C
9-1-264 C
1-3/8" Depth
Order No.
Diameter
Order No.
9-1-134 C
9-1-136 C
9-1-138 C
9-1-140 C
9-1-142 C
9-1-144 C
9-1-146 C
9-1-148 C
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
9-1-150 C
9-1-152 C
9-1-154 C
9-1-156 C
9-1-158 C
9-1-160 C
9-1-162 C
9-1-164 C
Diameter
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-3/8" Depth
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
Order No.
Diameter
9-1-266 C
9-1-268 C
9-1-270 C
9-1-272 C
9-1-274 C
9-1-276 C
9-1-278 C
9-1-280 C
9-1-282 C
9-1-284 C
9-1-286 C
9-1-288 C
9-1-290 C
9-1-292 C
9-1-294 C
9-1-296 C
9-1-298 C
9-1-2100 C
9-1-2102 C
9-1-2104 C
9-1-2106 C
9-1-2108 C
9-1-2110 C
9-1-2112 C
2-1/16"
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
Order No.
Diameter
9-1-2114 C
9-1-2116 C
9-1-2118 C
9-1-2120 C
9-1-2122 C
9-1-2124 C
9-1-2126 C
9-1-2128 C
9-1-2130 C
9-1-2132 C
9-1-2134 C
9-1-2136 C
9-1-2138 C
9-1-2140 C
9-1-2142 C
9-1-2144 C
9-1-2146 C
9-1-2148 C
9-1-2150 C
9-1-2152 C
9-1-2154 C
9-1-2156 C
9-1-2158 C
9-1-2160 C
9-1-2162 C
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
4-1/16"
4-1/8"
4-3/16"
4-1/4"
4-5/16"
4-3/8"
4-7/16"
4-1/2"
4-9/16"
4-5/8"
4-11/16"
4-3/4"
4-13/16"
4-7/8"
4-15/16"
5"
5-1/8"
9-1-324 C
9-1-326 C
9-1-328 C
9-1-330 C
9-1-332 C
9-1-334 C
9-1-336 C
9-1-338 C
9-1-340 C
9-1-342 C
9-1-344 C
9-1-346 C
9-1-348 C
9-1-350 C
9-1-352 C
9-1-354 C
9-1-356 C
9-1-358 C
9-1-360 C
9-1-362 C
9-1-364 C
9-1-366 C
9-1-368 C
Diameter
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
2-1/8"
Order No.
Diameter
9-1-370 C
9-1-372 C
9-1-374 C
9-1-376 C
9-1-378 C
9-1-380 C
9-1-382 C
9-1-384 C
9-1-386 C
9-1-388 C
9-1-390 C
9-1-392 C
9-1-394 C
9-1-396 C
9-1-398 C
9-1-3100 C
9-1-3102 C
9-1-3104 C
9-1-3106 C
9-1-3108 C
9-1-3010 C
9-1-3112 C
9-1-3114 C
9-1-3116 C
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8'
3-7/16"
3-1/2"
3-9/16"
3-5/8"
Cutter Kits
Each hornet carbide cutter kit comes with
the following: 9/16",11/16", 13/16", 15/16",
1-1/16", pilot pin & carrying case.
Order No.
Description
9-1-001 C 1-3/8" depth Cutter Kit
9-1-002 C 2-3/8" depth Cutter Kit
**We also stock Metric Carbide cutters.
Please call us for pricing and delivery.
Larger diameters and special sizes are
available upon request.
Pilot Pins for 9-Series
Order No.
Description
9-3-102 C
9-3-202 C
9-3-302 C
5/8" - 2" dia., 1-3/8" depth
11/16" - 2-5/16" dia., 2" depth
13/16" - 2" dia., 3" depth
For 3/4" Shanks
For 1-1/4" Shanks
3-3/8" Depth
Order No.
Shank size:
3/4" for cutters up to 3" dia.
1-1/4" for cutters 3-1/16 to 5-1/8" dia.
ANNULAR CUTTERS
Order No.
Order No.
Diameter
9-1-3118 C
9-1-3120 C
9-1-3122 C
9-1-3124 C
9-1-3126 C
9-1-3128 C
9-1-3130 C
9-1-3132 C
9-1-3134 C
9-1-3136 C
9-1-3138 C
9-1-3140 C
9-1-3142 C
9-1-3144 C
9-1-3146 C
9-1-3148 C
9-1-3150 C
9-1-3152 C
9-1-3154 C
9-1-3156 C
9-1-3158 C
9-1-3160 C
9-1-3162 C
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
4-1/16"
4-1/8"
4-3/16"
4-1/4"
4-5/16"
4-3/8"
4-7/16"
4-1/2"
4-9/16"
4-5/8"
4-11/16"
4-3/4"
4-13/16"
4-7/8"
4-15/16"
5"
5-1/8"
9-3-202A C
9-3-302A C
2-3/8" - 5-1/8" dia., 2" depth
2-3/8" - 5-1/8" dia., 3" depth
Option for Cutters 3" Depth
7-3-402
2-piece pin for 3" depth cutters
with 8mm pilot hole.
➤ See pages 40-48 for Drill Accessories.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
39
Lubricants
LUBRICANTS AND PILOT PINS
Coolant extends the life of cutting tools
ProLube™ Ideal for cutting steel, stainless steel and hard metals
Your cutting tools will work cooler, longer and more
efficiently with ProLube™ Lubricants from CS Unitec.
• Prolong tool life by reducing friction and wear
• Unique composition provides excellent adhesion
to cutting tools for maximum lubrication
• Corrosion inhibitor
• Non-toxic
ProLube Paste
CS 7030-712
12 oz. tub
ProLube Liquid
Water soluble 16:1
CS 7010-504 - 1 gal. bottle
Upgrade your drill's cooling system: see page 42 for arbors with automatic cooling.
Cutting Oil
• High-performance, biodegradable, non-hazardous oils and pastes
• Oils for heavy removal of metal, including stainless steel
• Chlorine-free (MSDS on bottle/tub)
• Not necessary to dilute with water
Cutting Oil:
Part No. ZHS 006 (quart)
Part No. ZHS 005 (gallon)
Pressurized Coolant Bottle
Use with any automatic internal lubrication system.
Part No. 9 4002 0020
Shown at right:
2-piece pin for
3" and 4" depth
cutters with
8mm pilot hole
(Part No. 7-3-402).
Pilot Pins for Cutters
• Milled channel efficiently supplies internal
lubrication to cutting teeth
• Available for cutter diameters ranging from
7/16" to 51/8" and 1", 2", 3" and 4" depth of cut
• See price list for part numbers
40
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Drill Chucks for Straight Shank Twist Drills
• Two capacities: 1/2" and 3/4"
C
D
B
• Four chucks and adapters to fit all magnetic drills:
A) IBC 17 – 1/2" chuck for MAB 425 and CSU 32 series
B) IBC 18 –
1/2"
A
3/4"
chuck with
shank for AIRBOR™
and HB 4400 (fits all drills with 3/4" arbor bore)
C) IBC 21 – 3/4" chuck with MT3 shank for MAB 825,
CSU 80AC and CSU 100/3RL
D) IBC 22 – 3/4" chuck with MT2 shank for MAB 455,
MAB 525 and CSU 50 series
Quick-change Tapping Tools, Collets and Chucks
• Manufactured from high-quality HSS to ASA
Standard (or DIN 376 for metric)
• Ideal for CS Unitec's portable drilling and
tapping machines and other drills
Tap collets fit magnetic drills with 3/4" arbor bore.
Available for taps 1/4" through 3/4".
Hold standard USA taps conforming to ASA.
See page 24 for additional tapping accessories.
Quick-change tapping chuck, Part No. GSW-222, with MT2
connection, complete with flexible collet to tap 5/16" to 5/8".
For use with CSU 50RL and MAB 485 magnetic drills.
Tap up to
1-5/8"
max. dia.
DRILL CHUCKS AND TAPPING TOOLS
Accessories
Part No. GSW-830C tapping chuck includes two variable
clamp collets to tap 3/8" to 1 1/8". It is the least expensive
system if you will tap more than 4 sizes. GSW-830C has an
MT3 connection. For use with all MT3 drills.
Variable clamp collets for use in tap chuck No. GSW-830:
Part No. GST-160 variable clamp collet for shanks 3/8" – 5/8".
Part No. GST-230 variable clamp collet for shanks 5/8" – 7/8".
GSW-830C
Part No. GSW-444 quick-change tapping chuck with
MT4 connection (for MAB 1300). Collets not included.
GSS-420 collet for 1/2" shanks
GSS-422 collet for 5/8" shanks
GSS-427 collet for 3/4" shanks
•
GSS-433 collet for 1" shanks
GSS-442 collet for 11/4" shanks
1-800-700-5919
•
Visit our Web site at www.csunitec.com
41
Accessories
ARBORS AND POWER ASSIST
Arbors for Annular Cutters
• Use on any magnetic drill stand, drill press or shop equipment
with a Morse Taper intake of No. 2, 3 or 4
• Available for Annular Cutter shank sizes of 3/4" or 11/4" Weldon
• Available for automatic internal cooling or manual cooling
Manual Cooling
Automatic Cooling
ZIA 219M – Morse Taper No. 2
3/4" arbor bore
ZIA 219KN – Morse Taper No. 2
3/4" arbor bore
ZIA 319M – Morse Taper No. 3
3/4" arbor bore
ZIA 319KN – Morse Taper No. 3
3/4" arbor bore
ZIA 30/75 – Morse Taper No. 3
3/4" arbor bore, 3" depth
ZIA 30/32 – Morse Taper No. 3
11/4" arbor bore
ZIA 419M – Morse Taper No. 4
3/4" arbor bore
Quick-lock Arbor with Automatic Internal Cooling
turn,
click…
• Keyless for fast, no-tools changeover
for 3/4" dia. shank annular cutters
• Automatic internal cooling
• Turn, click… go!
GO!
ZSS 200 – Morse Taper No. 2
for 3/4" dia. shank
annular cutters
Keyless,
quick-change
system for annular
cutters saves time
and money.
ZSS 300 – Morse Taper No. 3
for 3/4" dia. shank
annular cutters
Just twist and lock!
Power Assist
The Power Assist is a standard capstan, designed with delayed torque
transfer. This decreases the load on both cutter and drilling machine,
allowing the machine to maintain max. RPM under full load.
• Reduces drilling time • Prevents cutter breakage
• Extends lifespan of cutter/drill bit and machine
ZPA 401 – Power Assist for CSU 32 and CSU 50 series
ZPA 402 – Power Assist for CSU 80 and CSU 100/3 series
42
•
1-800-700-5919
•
Power
Assist
Capstan
Visit our Web site at www.csunitec.com
Accessories
Extra-long holders extend stroke of drills
• Extend cutter reach up to 18"
• Available for magnetic drills with 3/4" arbor bore or MT3
• Also available with 3 flats for straight shank drill
chucks and R8 shanks for drill presses
3/4" Weldon
• Drill difficult-to-reach areas
Shank
• Extend cutter reach over the
(2 Flats)
side or through an existing hole*
7-9-902 – 2" extension
7-9-903 – 3" extension
7-9-906 – 6" extension
7-9-912 – 12" extension
7-9-918 – 18" extension
* Hole diameter must be larger than 1 5/16"
to accommodate width of extension
We also offer extensions with the following connections:
3 Flats for
Geared
Chucks x
3/4" arbor
MT2 or
MT3 x
3/4" arbor
R8
ANNULAR CUTTER EXTENSIONS
Extensions for Annular Cutters
2-in-1 Drill/Taps
Drill and tap with one tool
National Coarse Threads (UNC) – sizes available:
CS500 – 1/2" x 13 UNC
CS625 – 5/8" x 11 UNC
CS750 – 3/4" x 10 UNC
CS875 – 7/8" x 9 UNC
CS1000 – 1" x 8 UNC
CSDT-UNCKIT – 1/2", 5/8", 3/4" & 1" drill/taps
82˚ and 90˚ Countersinks
• Manufactured of HSS with 5% cobalt
Countersink hole sizes:
• 3/4" Weldon shank
CTS 30 from 5/8" to 2 " / 82˚
CTS 50 from 5/8" to 2 1/8" / 90˚
Detachable Chip Guard
Protects against flying chips when drilling
ZSS 050 – for MAB 150, MAB 425, MAB 485 and MAB 525
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
43
Accessories
STARTER KITS AND POWER WORKER MAGNET
Starter Kits
CS Unitec starter kits offer the essentials you need
to begin drilling. We have two options that provide a
cost-effective tool set for your application.
HSS Steel Cutter Starter Kit
ZST 100S Kit Includes:
Set of 5 annular cutters (one each of the following):
11/16" dia. x 1" depth (6-1-122)
9/16" dia. x 1" depth (6-1-118)
13/16" dia. x 1" depth (6-1-126) 15/16" dia. x 1" depth (6-1-130)
1-1/16" dia. x 1" depth (6-1-134)
2 pilot pins • 1 cutter storage box • 1 Power Worker magnetic stick (POW 100)
1 quart high-performance cutting oil (ZHS 006)
See pages 34-35 for more information on HSS annular cutters.
Other
annular
cutter kits are
available –
contact CS Unitec
for details.
Armor-Plated TiAlN Cutter Starter Kit
ZST 100P Kit Includes:
Set of 5 annular cutters (one each of the following):
9/16" dia. x 1" depth (8-1-118)
11/16" dia. x 1" depth (8-1-122)
13/16" dia. x 1" depth (8-1-126) 15/16" dia. x 1" depth (8-1-130)
1-1/16" dia. x 1" depth (8-1-134)
2 pilot pins • 1 cutter storage box • 1 Power Worker magnetic stick (POW 100)
1 quart high-performance cutting oil (ZHS 006)
See pages 36-37 for more information on Armor-Plated TiAlN annular cutters.
Power Worker – simple cleanup of steel chips
Rare earth magnet cleans metal parts and shavings
• Easily clean up sharp-edged drill chips, screws and other metal parts
POW 100
• Items are safely ejected off of Power Worker without hand contact
• Ideal for hard-to-reach spaces
44
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Clamping Devices
A true advance in magnetic drilling technology:
The new clamping system MOBIL CLAMP can be used to
convert a magnetic drilling machine into a bench drill.
Extends the functionality of your portable magnetic drill. Ideal for
parts that previously could only be drilled in the workshop – they
can now be machined on site. MOBIL CLAMP makes it possible
to drill, countersink, ream or tap small parts, since these can be
mounted into the quick clamping device.
With the mounting of a magnetic drilling machine onto the
surface of the vice and the subsequent activation of the magnet,
you will have a versatile, stationary drilling machine in next to no
time. The magnetic drilling machine becomes a multi-purpose
machine: whether large or small applications, flat or high, with the twist drill or the reamer, everything is
possible. A stable support, designed for the MOBIL CLAMP clamping device, ensures the
correct working height and a
comfortable and reliable operation.
CLAMPING DEVICES
MOBIL CLAMP
ZMC 180
MOBIL CLAMP
Order No.
ZMC 180
ZMC 300
Jaw
width
Quick-action
clamping jaw
V-block
clamping jaw
4"
3.15" (80mm)
(100mm) clamping width
•
Base stand for clamping device
Powerful grip
Jaws with step and
prism for clamping of
flat and round material.
Fine adjustment
in longitudinal
movement by an
adjusting screw
accurately set to
the machining
point.
ZMC 300
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
45
Clamping Devices
CLAMPING DEVICES
Drilling stand and vise for hand drills
Industrial drilling pillars for commercial hand drills with 43mm chuck journal diameter.
Optimum stability by cast base plate combined with a pillar top of the MAB series.
Versatile usability by a drill vise with 4" (100mm) jaw width (special accessories).
Screws for slots are available for additional security under higher loads (special accessories).
Working stroke of 9" - 17" (230 - 425mm).
Vise
Accessories
Order No. ZST 100
jaw width: 4" (100mm)
clamping range: 4" (100mm)
Screws for T-Slots
Order No. ZTN 100
Hexagon Nut with Collar
Order No. ZSM 100
Drilling Pillar
Order No. ZBS 100
Drill not included.
Dimensions shown in mm.
46
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Vacuum Plates
VACUUM PLATES
For applications where drill alone will not adhere to surface
Vacuum Plate for Channeled Plates
Order No. ZAV 301 (vacuum plate only)
Order No. ZAV 310 (vacuum plate and
vacuum pump, 110V)
Ideal for channeled plates. High-performance
vacuum pump with circular oil lubrication.
Clamping plate diameter: 11.8"
Vacuum Plate for Smooth Surfaces
Order No. ZAV 401 (vacuum plate only)
Order No. ZAV 410 (vacuum plate and
vacuum pump, 110V)
Ideal for smooth surfaces. High-performance
vacuum pump with circular oil lubrication.
Clamping plates with two suction surfaces and
cut-through drilling area.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
47
Pipe Saddle Clamp System
PIPE SADDLE CLAMP
Ensures safe, secure drilling of pipes and tubular material
Ideal for applications requiring the flexibility of clamping on pipes
from 3-1/4" to 20" diameter, these pipe clamp systems are flexible
and easy-to-use. Swivelling V-blocks fit the contour of the pipe while
the heavy-duty tension chains securely affix the clamps to the piece
being drilled. The drilling position can be easily and safely adjusted.
ZRO 250 Pipe Saddle Clamp System
ZRO 500 Pipe Saddle Clamp System
Pipe diameters 31/4" - 10"
Chain length: 351/2"
For models: MAB 425, MAB 455, MAB 485,
P1, MDM 40 and CSU 32
Pipe diameters 6" - 20" (extension chain available)
Chain length: 65"
For models: MAB 525, MAB 825, MAB 845, CSU 50,
CSU 80, CSU 100/3, AB-4300-2 and HB 4400
Dimensions shown in mm.
Dimensions shown in mm.
Order No. ZRO 001 – extension chain for ZRO 500
pipe saddle clamp.
48
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Custom-engineered Machines
Unusual applications require unique solutions. We
can help you build custom drills for a wide variety of
applications. With our considerable experience
building custom drills, our engineers can assist you
to create machines that can drill on uneven
surfaces, in various directions, and more.
We enjoy a challenge! Contact us
today for a professional solution
for your unique application.
Our capabilities include:
• In-house CAD design
• Prototype construction
• Manufacturing of special
accessories
Custom Machine
Options Include:
✓ Reverse Drilling
✓ Alternative Mounting
Configurations
✓ Magnet Variations
✓ Motor Customization
✓ Adjustable Drilling Depth
Machine
rendering
above shows
reverse-mount
motor for
drilling upside
down.
CUSTOM-ENGINEERED MACHINES
Design a custom machine for your specific needs
Call 1-800-700-5919
for design assistance.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
49
PORTABLE MULTI-PURPOSE BEVELING MACHINE
Multi-purpose Beveling Machine
Bevel, deburr & chamfer edges of steel
plate faster and cleaner than angle grinders
The EKF multi-purpose beveling machine is designed to bevel
30˚ or 45˚ weld seams on steel, stainless steel, nonferrous
metals, brass and plastics. It can also be used to deburr and
chamfer; straighten edges, internal and external radii; and
countersink holes from 7/8" diameter.
• Fine adjustment feature for slight chamfers when deburring
for the preparation of weld seams
• Three milling head options – 30˚, 45˚ and 2.5mm
• Ideal for the following applications: Moldmaking (straighten
edges, internal and external radii and countersink holes
from 7/8" dia.); Boiler and process plant construction
(prepare weld seams on heat exchangers); Mechanical
engineering (deburr machine parts, chamfer edges to
protect against paint peeling and create visible edges);
Sheet metal (deburr cut edges)
One Machine, Three Milling Options
30˚
EKF300.3
EKF450.3
Milling cutter 30°,
Chamfer 0 - 1/4"
Milling cutter 45°,
Chamfer 0 - 1/4"
EKF452.3
Milling cutter
2.5 radius (optional)
Cutting Plates - Sold as pack of 10
Order No. SHM 200: 30˚ and 45˚
Order No. SHM 200-E: 30˚ and 45˚ for stainless steel
Order No. SHM 202: 2.5mm radius
Fine adjustment
Precise control of
chamfer when
deburring for weld
seam preparation
Standard equipment
includes milling head and two
inserts, SW22 key, carrying
case and user’s manual.
Please see our Price List for
available accessories.
Portable Beveler Specifications
EKF300.3
EKF450.3
EKF452.3
Beveling angle*
30˚
45˚
2.5mm
Bevel width (max.)**
1/4"
1/4"
1/4"
Motor power/Voltage
13.5 Amp / 110 V (220 V / 50 Hz also available)
Cutting speed
3000 SFPM
Cutting inserts
3
Dimensions (L x W x H)
12-1/2" x 5-1/2" x 11-5/8"
10.5 lbs.
Weight
* EKF milling heads are interchangeable.
** Max. bevel width may require several passes, depending on material hardness.
50
2.5mm radius
45˚
•
1-800-700-5919
•
The optimum fixture for stationary
deburring of small parts (Order No. ZKF 100)
Visit our Web site at www.csunitec.com
Portable Beveling Machine
PORTABLE BEVELING MACHINE
Bevel angles from 15˚ to 60˚ on plate and pipes
CS Unitec’s SKF 25 Beveling Machine provides fast and
easy preparation of weld seams and bevels 15˚ to 60˚ angles
on plate or pipe. It is ideal for use on steel, stainless steel,
aluminum and nonferrous metals and offers high-quality
performance that allows for superior weld connections.
• Continuously adjustable angle (15˚ to 60˚) and
land width up to 3/4"
• Robust design, single operator control and easy handling;
designed for continuous operation with smooth roller
guides
• Anti-vibration system protects electronics and allows for
more comfortable operation
• Includes one milling head and 10 indexable inserts
for fast metal removal and extended tool life
• Work on welding angles and weld preparation on
pipes/tubes with a minimum OD of 6-1/4" (160mm) with
built-in pipe roller guide; ideal for beveling pipe
6-1/4" OD and larger
SKF 25
Single-operator,
straightforward handling
Portable Beveler Specifications
Precise roller guidance,
low friction resistance
SKF 25
15˚ - 60˚
Beveling angle
10 Amp
Motor power
Voltage
Ideal for beveling pipe
6.25" OD and larger
3/4"
Bevel width (max.)**
110 V (220 V / 50 Hz also available)
Cutting speed
1800 SFPM
Cutting inserts
10
Cutting Plates - Sold as pack of 20
Order No. SHM 800: for beveling carbon and
stainless steel
16-1/2" x 13"
Dimensions (L x W x H)
43 lbs.
Weight
Standard equipment includes one milling head,
10 sintered carbide reversible cutting inserts, tools
for assembly, built-in pipe roller guide, steel
carrying case and user’s manual. Please see our
Price List for available accessories.
** Max. bevel width may require several passes, depending on material
hardness. Steel case intended mainly for shipping purposes; damage
may occur in transit.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
51
LINEAR GRINDING SYSTEM
PTX Eco Smart
The professional surface finisher
for hard, continuous use
A revolution in linear grinding! Simply slide on the
abrasives and they secure themselves automatically
when the machine turns. Fast and easy!
PTX Eco Smart is a multi-functional grinding and
polishing system for flat surfaces and open or closed
pipe constructions. It grinds from coarse to very fine
finishes and burnishes to a high-gloss finish. It
enhances stainless steel, steel and
nonferrous metals including
aluminum, brass, bronze and
copper, as well as wood and
rigid plastic.
110 Volt
or 230 Volt
PTX Eco Smart Specifications
Order Number: 47002A
Power
15 Amp (1650 Watts)
110 Volt / 60 Hz
(Also available: 230 Volt / 50 Hz)
A wide selection of
hollow-core abrasives
is available for the
PTX Eco Smart and
MULTI-MAX. The lack
of a core insert means
that the abrasives are
lighter, easier to use
and less expensive.
Variable speed
Variable speed control from 950 to 3700
RPM with tachogenerator for constant
speed, even under load
Speed control dial
With fine adjustment for using abrasives
at optimum efficiency
Wheel width
Wheel diameter
Weight
up to 4" (or 6" wide abrasives)
up to 4-1/2"
7.25 lbs. (3.3 Kg)
Sheet Metal Deburring Machine – ROLEI® BE 5
Simple, one-step deburring of sheet metal up to 0.2" thick can be achieved
in a single operation with no additional treatment. Two-speed operation –
1200 RPM for standard deburring and 600 RPM for fine deburring.
2
52
Deburring on both sides
of the sheet edges
•
1
Sheet with burr
after cutting
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Electric Drills and Drive Units
Model EHB 16/1.4 S
Model
EHB 32/4.2
Model
EHB 20/2.4
Heavy-duty Drills for Industrial
and Construction Applications:
• High-torque output
• Variable-speed, two- and four-geared drills
for optimum speed selection
• Reversible motors and electronic torque control
on selected models
• Ideal for special applications including valve turning,
tube rolling and other jobs
• Safety slip clutch on 11/4" capacities
to protect operator and tool
• Drilling capacities up to 11/4" in steel
• Special OEM motors available
on request
• One-year warranty
Model EHB 16/2.4 S
Model EHB 16/2.4 S/RL
Model
EAU 34/4 CB
Model No.
EHB 16/1.4 S
EHB 16/2.4 S
EHB 16/2.4 S/RL
EAW 16/2 R/L
EHB 20/2.4
EHB 32/4.2
EAU 34/4**
EAU 36/4
Model
EAU 36/4
Motor
Power Voltage*
(Amps)
Max.
Drilling Torque ReversCapacity Output
Chuck/Arbor Weight
ible
(lbs.)
in Steel (ft./lbs.)
Load Speed
(RPM)
7.3
110V
0-500
5/8"
12
NO
5/8"
Keyless
6.8
10
110V
0-430/0-760
5/8"
19
NO
5/8"
Geared
7
10
110V
0-430/0-760
5/8"
19
YES
5/8"
Geared
7
9
110V
510/950
N/A
8
YES
5/8"
X 16 UN
7
10.5
110V
250/450
3/4"
32
NO
MT2
9.2
112
NO
MT3
15.2
15.5
110V
110/175/245/385
11/4"
20
110V
80/130/360/570
–
203
YES
MT3
19.5
22
110V
50-120
80-190
110-270
180-420
–
187
YES
MT3
20
with 4-speed gearbox
and variable speed
ELECTRIC DRILLS AND DRIVE UNITS
High-torque, multi-geared and variable-speed motors
* All units available in 220 Volt / 50Hz ** EAU 34/4 available with control box (on/off, reverse) – order Model. No. EAU 34/4 CB
Special Motors available upon request.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
53
Electric Drills and Drive Units
SLOW-SPEED ELECTRIC DRILLS AND DRIVE UNITS
Slow Speed: two-geared, variable-speed reversible motors
• High-torque, two-geared and variable-speed
reversible motors
• Ideal for drilling, reaming and tapping steel
• Driving applications include mills, spindles, bar
boring, pipe beveling and valve turning
• Perfect for tube rolling and expanding for
fire tube and water tube boilers
• Mechanical safety clutch prevents operator injury or
damage to the tool
• Morse Taper #3 arbor
• One-year warranty
Model ETE 32/2.3 R/RL
(shown with optional
Square Drive adapter)
Model EHB 32/2.2 R/RL
Model ETE 32/2.3 R/RL
1 /2 "
twist
Up to
drill capacity
Model No.
Motor
Load Drilling Tube Revers- Torque Torque
Output Control Arbor Weight
Power Voltage** Speed Cap. in Rolling
ible (ft./lbs.)
(lbs.)
(Amps)
(RPM) Steel (max.)
EHB 32/2.2 R/RL 16.3
110V
60-140 /
200-470
11/4"
2"
ETE 32/2.3 R/RL
110V
30-75 /
90-230
N/A
3" ***
16.3
** All units available in 220 Volt / 50Hz
*** With Expander (Up to 2 1/2" with Bead Roller)
54
and 3/4" Square Drive
accessories allow motor
compatibility for various
drive applications.*
1 1 /4 "
•
YES
92 max.
YES
MT3
14
YES 174 max.
NO
MT3
15
* 1/2" Square Drive with MT3 – Part No. 830-1230-050
3/4" Square Drive with MT3 – Part No. 830-1230-075
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Special Electric Motor Options
Control Boxes
with On/Off,
Variable Speed
Gear Selection Knob
Holes for Mounting
(Model EAU 34/4 only)
Driving applications
include mills, spindles,
bar boring, tube rolling,
valve turning and more.
Spindle Options:
MT2 / MT3
Square Drive
or Threaded
Custom Design
Options Include:
✓ Forward/Reverse
✓ Variable Speeds
✓ Multiple Gears
✓ Spindle: MT or Special
✓ Multifunctional
ELECTRIC DRIVE UNITS / SPECIAL MOTORS
High-torque, reversible electric drill motors for custom applications
Control Boxes
or Handles
✓ 1/2 to 4 HP
✓ Modular Design
Forward/Reverse Control
Contact us today to
configure the motor
that meets your specific
driving applications.
•
1-800-700-5919
Electronic Torque Control
Variable-speed Dial
•
Visit our Web site at www.csunitec.com
55
Pneumatic Drills and Drive Units
PNEUMATIC DRILLS AND DRIVE UNITS
High-torque reversible drilling and tapping machines
• High-torque reversible drilling, tapping and threading machines
• Ideal for drilling, reaming, tube rolling, tube expanding and tapping
• Use for special applications including mills, spindles, slides, controllers,
pipe tapping, valve turning and more
Morse Taper Drills
• Drill chucks and Morse Taper arbors
• Hammer drills for drilling concrete
with up to 2200 blows per minute
• Special OEM air motors
available on request
• One-year warranty
ATEX
w/ Feed Spindle
D-handle Drills
Model
2 2089 0030
with reverse and
safety twist throttle
Model
2 1310 0010
Pneumatic Hammer Drills Pneumatic Pistol Drills
See page 58
for Rotary
Hammer Drills
Model
2 1261 0010
Model 2 1266 0010
Motor Load
ReversModel No. Power Speed ible
(HP)
(RPM)
Chuck/
Arbor
Drilling Tube Torque
Cap. in Rolling Output
Cap. (ft./lbs)
Steel
Pistol Drills
1/2"
2 1261 0010
0.7
NO 1/2" Chuck
850
Hammer Drills (for concrete and underwater applications)
1/2"
2 1266 0010
0.75
NO 1/2" Chuck
950
D-handle Drills
1/2"
2 1310 0010
0.8
NO 1/2" Chuck
650
5/8"
2 1311 0010
0.8
NO
MT1
650
Morse Taper Drills w/ Feed Spindle
2 2089*
1.7
11/4"
YES
MT3
250
2 2506*
2.5
11/4"
YES
MT3
220
2 2502*
2.5
2"
YES
MT4
80
CFM
at 90 Length Feed Weight
Length (lbs.)
PSI
N/A
7 max.
21
93/4"
N/A
4.6
N/A
7 max.
21
12"
N/A
6.7
N/A
N/A
8 max.
8 max.
24
24
121/2"
11"
N/A
N/A
12
12
1"
2"
21/2"
36 max.
63 max.
173 max.
24
70
70
261/2"
15/8"
261/2"
21/2"
261/2"
21/2"
28
32
37
* The last four digits of the Model No. identify the type of throttle.
Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
56
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Corner Drills and Drives
Pneumatic and hydraulic: high-torque drilling,
reaming and driving units
Slow-speed, High-torque
Straight Drive Units
Model 2 1801 0030
Corner Drills and
Bridge Reamers
Model
2 2087 0010
with reverse
and lever throttle
• Small side-to-side distance
for working in tight spaces
• Self-closing roll throttle
• Built-in oiler for motor
• Ideal for bridge reaming
and drilling applications
• One-year warranty
• Visit www.csunitec.com
for dimensions
• Ideal for heavy-duty reaming, tube expanding
and tapping
• Perfect for special driving applications,
including pipe tapping and valve turning
Square Drive Accessories
2 2089 7020 – 7/8" Male Square Drive to 3/4" Male Square Drive
2 2089 7070 – 7/8" Male Square Drive to 1" Male Square Drive
6 1016 7940 – 7/8" Male Square Drive to 1" Male Square Drive
with retaining pin
Pneumatic
Tube Torque Load Motor CFM at
Weight
Corner Drill Morse Drilling Reaming Rolling
Length (lbs.)
Output Speed Power
Model No. Taper (in steel) (in steel) Cap. (ft./lbs.) (RPM) (HP) 90 PSI
Nonreversible
2 1602 0030
2 1701 0030
2 1801 0030
Reversible
2 2104 0030
#1
#2
#3
#4
5/8"
1/2"
7/8"
5/8"
11/4"
21/8"
3/8"
1"
N/A
N/A
N/A
7
35
53
500
270
260
0.7
1.8
2.6
2"
2"
86
180
3.0
inlet. 1/2"
21
49
63
12.5"
20.9"
22.5"
7
19
25
71
23.8"
37
3/4"
CORNER DRILLS AND DRIVES
ATEX
1/2"
Model No. 2 1602 0030 has a
NPT air
(13mm) hose is recommended. All other models have
NPT air inlet. A
(13mm)
hose is recommended for model 2 1701 0030. A 5/8" (15mm) hose is recommended for models 2 1801 0030 and 2 2104 0030.
Hydraulic
Corner Drill Morse Drilling Reaming Tube Torque Load Motor
Rolling Output Speed Power
Model No. Taper (in steel) (in steel) Cap. (ft./lbs.) (RPM) (HP)
2 1806 0010
#3
11/4"
1"
N/A
60
220
3.8
Oil
Flow/
PSI
Length
Weight
(lbs.)
4 GPM
@2000
21"
25
Pneumatic
Torque Load
Tube Tapping Motor CFM at
Drive Unit Square
Drive Output Speed ReversRolling
Cap. Power 90 PSI
Model No.
ID
(ft./lbs.) (RPM) ible
Cap.
(HP)
2 2081*
13/16"
413
20
YES
Weight
(lbs.)
3"
11/2"
1.35
53
10.9" x 26.5"
29
1.35
53
10.9" x 26.5"
29
1.35
53
10.9" x 26.5"
29
2087*†
7/8"
413
20
YES
3"
11/2"
2 2088*†
7/8"
138
60
YES
2"
3/4"
2
Height x
Length
†
* The last four digits of the Model No. identify the type of throttle.
Square drive accessories available (see above).
Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
57
ROTARY HAMMER DRILLS
Rotary Hammer Drills
ATEX
Pneumatic and hydraulic: powerful percussion drilling for
concrete and masonry
• SDS chuck
• Safety clutch protects against overloading and jamming
• Hammer drill holes in concrete, brick and masonry
• Rotary drilling mode for straight drilling of steel and wood
• Open center hydraulic standard, closed center optional
SDS Max – Modes of Operation
2" bit capacity for drilling concrete and masonry
Air Model 2 2404 0010
SDS Plus up to 1" dia.
SDS Plus – Hammer and Drill
Hammer with Rotation
Ideal for concrete drilling
1" bit capacity for drilling concrete and masonry
Rotation Only
For drilling steel
and wood (not reversible)
Drill concrete anchor holes, thru holes,
piping and mechanical openings for
construction and repair work. Switches to
rotary drilling mode for steel and wood.
Air
Model 2 2417 0010
SDS Max
Second handle
position
Hydraulic
Model
2 2418 0010
SDS Max
SAE #8 port for
hydraulic hose
connection
SDS Drill Bits
Optional accessory for use with closed center
hydraulic power systems - adapts open center
tools to closed center. [Part No. 38632]
Air
Power
at 90 Consumption at
PSI
90 PSI
Pneumatic Blows/ Drill Solid Bit Core Bit
Twist
Hammer Drill Minute Speed Capacity Capacity
Drill
Model No. (BPM) (RPM) (Concrete) (Concrete) (wood)
0-2000
0-3000
0-3000
0-2500
0-950 1/2" dia.
0-625 1" dia.
0-625 1" dia.
0-250 2" dia.
SAE #8
oil port
Closed Center Flow Control Valve
Small Masonry Bits
SDS Plus up to 1" dia.
Large Masonry Bits
SDS Max up to 2" dia.
2 1266 0010*
2 2404 0010
2 2404 0030*
2 2417 0010*
Hydraulic Model
2 2406 0010
SDS Plus
1" dia. 3/8" dia.
3" dia. 3/4" dia.
3" dia. 3/4" dia.
6" dia. 11/4" dia.
0.75 HP
0.7 HP
0.7 HP
1.6 HP
21 CFM
21 CFM
21 CFM
53 CFM
Tool
System
1/2"
Dimensions
(inches)
12 x 81/2 x 4
SDS Plus 16 x 81/2 x 4
SDS Plus 16 x 81/2 x 4
SDS Max 191/2x 9.8 x 41/2
Chuck
Weight
(lbs.)
7
11
11
26
* Underwater model – Optional underwater air tool line conditioner to displace moisture, Part No. MS 9105. See page 59.
Hydraulic Blows/ Drill Solid Bit Core Bit
Hammer Drill Minute Speed Capacity Capacity
Model No. (BPM) (RPM) (Concrete) (Concrete)
2 2406 0010 0-3400 0-625 1" dia.
2 2418 0010 0-2500 0-250 2" dia.
Twist
Drill
(wood)
Flow
Power
Range
at
at 2000
1450 PSI
PSI
(GPM)
Tool
System
Dimensions
(inches)
3" dia. 3/4" dia. 0.8 HP 5.8-13.2 SDS Plus
18 x 101/4 x 4
1
6" dia. 1 /4" dia. 1.8 HP 2.6-13.2 SDS Max 191/2 x 111/8 x 71/2
Hydraulic Hammer Drills operate at hydraulic pressures of 1,450 - 2,000 PSI. Available with optional closed center.
58
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Weight
(lbs.)
15
37
Heavy-duty power for underwater drilling
and other wood boring applications
Model 2 1924 0010
with self-closing roll throttle
Up to 2" for boring wood
• Ideal for drilling wood in marine timbers,
underwater use and railroad repair work
• Thrust bearing support for long life and
efficient operation
• Lever throttle and durable spur gearing
• Breast plate and dead handle included
• Includes threaded exhaust port
• Use underwater with Air Tool Line
Conditioner (shown below)
Accessories and woodboring
drill bits from 1/2" dia. to 11/8"
dia. in lengths from 12" to 36"
Model 2 1903 0010
with lever throttle
Up to 1" for boring wood
Model 2 1903 0010
Capacity in Wood
Reversible
Power
Chuck Style
Spindle
Free Speed
Recommended Hose Size
Overall Height
Weight
Air Inlet Thread
Air Exhaust Thread
Air Consumption at 90 PSI
Optional Geared Drill Chuck
1" Diameter
Yes
2 HP
1/2" Woodboring
Stub Taper
750 RPM
1/2"
17 1/2"
14 1/2 lbs.
1/2" ID
1/2" NPT
39 CFM
Part no. DE-99C
Model 2 1924 0010
Model 2 1932 0010
2" Diameter
Yes
3 HP
1/2" Woodboring
#2 Morse Taper
700 RPM
1/2"
18 1/2"
24 3/4 lbs.
1/2" ID
1/2" NPT
50 CFM
Part no. IBC 22 (MT2)
3" Diameter
Yes
3 HP
1/2" Woodboring
#2 Morse Taper
380 RPM
1/2"
18 1/2"
24 3/4 lbs.
1/2" ID
1/2" NPT
50 CFM
Part no. IBC 22 (MT2)
WOODBORING AIR DRILLS
Woodboring Air Drills, Reversible
AirPac Extends life of pneumatic power tools
• Removes moisture and dirt
from air lines; a float valve
automatically ejects water
and dirt
• Includes automatic oiler;
prevents tools from freezing
Model CSAP-2
in cold environments
• Eliminates air motor downtime caused by water and dirt
• Connections for two tools; max. air flow 185 CFM
•
1-800-700-5919
•
Air Tool Line Conditioner
Underwater air tool conditioner
for marine applications.
Displaces moisture and
inhibits rust/corrosion of air
motors.
MS 9105 – 1 quart/liter
Visit our Web site at www.csunitec.com
59
PNEUMATIC AND HYDRAULIC NUT RUNNERS
Nut Runners - High Torque
ATEX
Pneumatic and hydraulic: ideal for turning valves, tightening,
tapping, reaming, pipe beveling, expanding and more
• Worm gear drive provides high torque – up to 554 ft.-lbs.
• Lightweight and reversible
• Compact angle head allows access to confined spaces
• Both pneumatic and hydraulic models available
• One-year warranty
Available with Male or Female
Square Drives, in a variety of sizes
Model
6 1055 0075
Male Sq. Drive Head
1/2" or 3/4"
Model numbers pictured above (listed from top to bottom): 6 1055 0075
(with male drive), 6 1055 0010 (female), 6 1014 0075 (with male drive)
Female Sq. Drive Head
3/4" or 7/8"
(7/8" pneumatic only)
Square Drive Accessories
6 1015 7030
3/4" Male Square Drive with retaining hole
(included with model numbers 6 1014 0075,
6 1055 0075 and 6 1056 0075)
3 6339 4910
Male Square Drive with retaining hole
(included with model numbers 6 1014 0099,
6 1055 0099 and 6 1056 0099)
1/2"
6 1017 7940
Male Square Drive with retaining pin
6 1018 7940
Male Square Drive with retaining pin
3/4"
1/2"
Pneumatic Square Stall
Free Load
Drive Torque Speed Speed Power CFM at
Nut Runner F=Female
at 90 PSI
(HP) 90 PSI
Model No. M=Male (ft-lbs.) (RPM) (RPM)
6 1014 0010
6 1014 0075
6 1014 0099
6 1055 0010
6 1055 0075
6 1055 0099
6 1056 0010
6 1056 0075
6 1056 0099
6 1057 0010
6 1057 0075
6 1057 0099
6 1061 0010
3/4"
F
3/4" M
1/2" M
3/4" F
3/4" M
1/2" M
3/4" F
3/4" M
1/2" M
3/4" F
3/4" M
1/2" M
7/8" F
100
100
100
423
423
423
141
141
141
60
60
60
423
180
180
180
44
44
44
120
120
120
260
260
260
44
100
100
100
22
22
22
67
67
67
125
125
125
22
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
Side to
Air
Hose
Center Length Weight ConnID
Distance (inches) (lbs.) ection
(inches)
(inches)
(inches)
42
42
42
45
45
45
42
42
42
46
46
46
45
1
1
1
1
1
1
1
1
1
1
1
1
1
22
22
22
21
21
21
21
21
21
21
21
21
21
10
11
11
10
10
10
10
11
11
11
11
11
11
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
Side to
Hydraulic Square Stall
Oil
Free Load Power
Oil
Center
Torque
Weight
Drive
Nut Runner F=Female at 90 PSI Speed Speed (HP) Flow Pressure Distance Length
(inches) (lbs.)
(GPM)
(RPM)
(RPM)
(GPM) (inches)
Model No. M=Male (ft-lbs.)
3 6242 0010*
3 6243 0010*
3/4"
F
3/4" F
554
223
44
44
22
90
1.6
1.6
4 - 13
4 - 13
1000
1000
1
1
20
20
22
22
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Connection
Quick
Couplers
1/2"
1/2"
* Also available with 1/2" (3 6242 0099) and 3/4" (3 6242 0075) Male Square Drive
60
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
FF
FF
Pneumatic and hydraulic: high torque and slow speed for special
driving and tapping applications
• Both pneumatic and hydraulic
models available
• Integrated torque reaction
stabilizers
• One-year warranty
Torque
reaction
stabilizers
Torque
reaction
stabilizers
Custom Designs
Available
Stall
Hydraulic
Oil
Free Load
Torque
Power Flow
Speed
Speed
Drive Unit Square
Drive at 90 PSI
(RPM) (RPM) (HP) (GPM)
Model No.
(ft-lbs.)
2 2090 0010 3/4" F
2 2810 0010 1-1/8" F
40
24
376
1550
20
12
1.5
3.5
4 - 13
4 - 13
Stall
Pneumatic
Free Load
Square Torque Speed Speed Power CFM at
Drive Unit Drive at 90 PSI
(RPM) (RPM) (HP) 90 PSI
Model No.
(ft-lbs.)
2 2804 0010 1-1/8" F
1327
40
20
5
141
Side to
Oil
Center Weight
Pressure Distance (lbs.)
(PSI) (inches)
1000
1000
2.2
3.6
Connection
Quick Couplers
28
77
1/2"
1/2"
FF
FF
Side to
Hose
Center Weight Air Connection
ID
Distance (lbs.)
(inches)
(inches)
(inches)
3.6
82
NPT 1"
1"
Also Available: Safety Tools
For use in ATEX
and EX Zones
PNEUMATIC AND HYDRAULIC DRIVE UNITS
Drive Units - High Torque
• High-quality
non-sparking and
non-magnetic safety tools
• Aluminum Bronze (AlBr)
Non-sparking
or Copper Beryllium (CuBe) alloy
Non-magnetic
• Hammers, wrenches, sockets,
wedges, chisels and more
• For ATEX and Ex zones where hazardous,
flammable or combustible materials are present
Request our catalog:
• Non-sparking Hand Tools
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
61
Super Hand Dry Cutter
8320 BigSaw 2
DRY CUTTING METAL SAWS
12 3/4" diameter, dry cut up to 4 3/4" depth
• Largest dry metal cutting saw on the market
• Dry cuts steel, sandwich panels, trapezoidal sheets,
conduits, metal pipes and more – without coolant
• Side-mounted tilt tray for disposal of chips
• Motor overload protection with optical overload indicator
• Dust collection port
Model No. 608270 U
Motor Power
Blade Diameter
Max. Depth of Cut
Speed (Free)
Arbor Size
Blade No. of Teeth
Weight
16 Amp/115V*
12-3/4" (324mm)
4-3/4"
1,400 RPM
1"
80T
21 lbs.
* 230V also available – Order No. 608270
Standard equipment includes a carrying case and saw blade (P/N 608276).
8320 BigSaw2 Optional Accessory:
Guide Rail with Clamping System
2 x 23 5/8" Rails (P/N 608275)
• Ideal for straight cutting of sandwich
panels and sheets
• Secure and jam-free guidance of saw
blade through material
• Rails can be used together for straight
edge length up to 47" (1,200mm)
Pneumatic Dry Cutting Saw
9" dia., dry cutting up to 3 1/4" depth, 3/8" steel plate
• Dry cuts steel, non-ferrous metal, plastic,
grating, composite and corrugated materials
• Cuts at 90˚ and 45˚ angles
• Ideal for foundries, petrochemical, marine,
demolition and fabrication applications
• Cuts steel plate up to 3/8" thick
Model No. 5 1115 0020
Motor Power
2 HP
Blade Diameter
9"
Max. Depth of Cut 3-1/4" at 90˚ / 2-1/8" at 45˚
Speed (Free)
1,700 RPM
Air Consumption
60 CFM at 90 PSI
Air Connection
1/2" NPT
Vibration
<2.5 m/s2
Weight
19 lbs.
Standard equipment includes an impact-resistant carrying
case and Ultra-thin LBS blade (P/N 722-23060).
62
•
Laser Beam Saw (LBS) ultra-thin
9" saw blade for 5 1115 0020 features:
9" diameter
(1" arbor)
• Thinner than conventional saw blades
LBS = .055" vs. Std. = .073" thickness
• Shock-resistant, less vibration
• Produces 35% fewer chips
Part Number
722-23060*
No. of
Blade
Recommended
Teeth Thickness
Use
60
.055"
All-purpose
* Comes standard with the Model 5 1115 0020 Air Metal Saw.
Other standard, dry cutting saw blades available.
Contact us for details.
1-800-700-5919
•
Standard blade
.073" (1.85mm)
thickness
Visit our Web site at www.csunitec.com
Ultra-thin blade
(P/N 722-23060)
.055" (1.4mm)
thickness
Surface Preparation Equipment
CS Unitec now offers even more innovative electric and pneumatic equipment for the preparation
of steel, concrete and stone. These tools are ideal for industries, including: construction, floor
preparation, utilities, marine & offshore, oil & gas, and nuclear decommissioning/remediation, as
well as restoration, refurbishment and demolition.
Contact us for more information about our new line of surface preparation equipment.
Hand-held ScaleForce Scaling
Hammers and Deck Hammers
Up to 33,000 blows per minute
Ideal for breaking down the hardest of coatings prior to
abrasive blast cleaning, reducing cost of blast media and
Trelawny™ – ScaleForce
increasing surface preparation productivity. Widely used in
the marine industry for removing rust, scale and paint from
ship decks, as well as to descale tanks, bridge decks and floating platforms. Low vibration for
operator comfort. Options include spark-resistant replacement heads for use in potentially
hazardous environments and vacuum shroud to reduce dust.
Peening Preparation Tools – Hand-held Scarifiers
Clean, economical alternative to small-area shot blasting
The PPT line of handheld scarifiers use 3M™ Heavyduty Rotopeen™ captive shot flaps or steel cutters
for surface preparation. These units are ideal for
the removal of alkyds, mastics, adhesives and
coatings corrosion from a range of steel and
concrete substrates. When part of a dust collection
system, these tools more safely remove hazardous
materials such as lead-based paints and contaminated
particles quickly and cleanly.
SURFACE PREPARATION EQUIPMENT
Electric and air power for the preparation of concrete, steel and stone.
Rotopeen™
Needle/Chisel Scalers
Trelawny™ original Vibro-Lo™ low-vibration scalers
Lightweight, easy-to-handle pneumatic units provide up
to 3000 blows per minute to remove coatings, corrosion
and other accumulated materials. Ideal for all surfaces,
especially irregular surfaces that are otherwise difficult to
prepare. Also used for chipping, weld dressing and
brick/stone cleaning. Optional in-line dust control
systems to maintain worksite/environment cleanliness.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
63
Also available from
:
CS Unitec, Inc. specializes in electric, pneumatic and hydraulic power tools for construction and industry.
Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company invented
the first pneumatic portable band saw. CS Unitec has added to its list of industry firsts with the widest
range of portable magnetic drills and hand-held concrete core drills. The line also includes electric,
pneumatic and hydraulic portable band saws, reciprocating saws, hack saws, nut runners, rotary hammer
drills, rolling motors, metal finishing tools, non-sparking safety tools, portable mixers, dust extraction tools
and vacuum systems.
… the power of innovation! ®
For more information, please visit our Web site at www.csunitec.com.
View product demonstrations at www.csunitec.com.
Electric, Pneumatic and Hydraulic Tools
Surface finishers
for sanding and
polishing steel
Grind In Corners!
Pipe sanders
for eliminating
weld seams
and polishing
stainless steel
Polish In Corners!
Angle grinders and flap discs for grinding,
sanding and polishing, even in corners
CS UNITEC, Inc.
22 Harbor Avenue, Norwalk, CT 06850
Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921
Email [email protected] • www.csunitec.com
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE
© Copyright 2012, CS Unitec, Inc., 07-12-4M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement