(044)361-05-06

(067)469-02-12

(099)048-99-03

(093)672-77-76

ICQ:495-089-192

ICQ:613-211-859

User's Manual

Bicycle holder + waterproof case for communicator Arkon SM032

In the online store Winauto you also can buy кейс для комунікатора аркон Arkon SM032 . Delivery in Kyiv and throughout Ukraine with payment upon receipt!

winauto.ua

Sale - Car Receivers - Facia Plates - Head Units - Car TVs and Monitors - Antennas - Car Audio - DVR - GPS Navigation - Trip Computers - Car

Alarm Systems - Mechanical Locking - Parking Systems - Car Cameras - Xenon and Lights - Established Optics - Tuning - Car Heating and Cooling -

Sound Marine and Electronics - Car Accessories - Isolation - Installation Components - Batteries, Power - Oils and Fluids -

Интернет-магазин автозвука и автотоваров Винавто

SM032 | Bicycle / Motorcycle Handlebar Mount & Water-Resistant Mobile Phone Holder

SM-WPCS

Water-resistant

Mobile Phone Holder

Package Contents:

(1) GN032-SBH - Bicycle or motorcycle handlebar mount with

swivel tightening ring

(1) SM-WPCS-WS - Water-resistant mobile phone holder with

set screw.

GN032-SBH

Bicycle or Motorcycle

Handlebar Mount

Set Screw

Fits handlebars up to 33mm diameter. Compatible with most straight, drop, trekking, touring, and standard (25.4mm and 26mm) size handlebars. Also for use with golf carts,

ATVs, snowmobiles, hang gliders or other apparatus having cylinder-shaped frames or posts.

Bicycle Handlebar Mounting

Step 1.

Choose a safe location on the handlebars of your bicycle in which to mount the pedestal.

Step 2.

Using a screwdriver, remove the two mounting screws (A) in order to release the ball plate and swivel head (B) so the mount can be placed around the handlebars. Ensure the screw nuts (C) are not lost when loosening the screws.

C

A

!

Precaution: A set screw has been provided to be installed into the back side of the water resistant holder to secure it to the handlebar pedestal. Ensure that the screw is properly installed to prevent the holder from falling from the pedestal.

Step 4.

Connect the dual T-tabs (G) on dual T-tab adapter head to the dual T-slots (H) on the water-resistant mobile phone holder.

Insert the set screw (I) into the set screw hole (J) and screw in tightly to prevent the pedestal head from slipping off .

H

Step 3.

B

G

J

C

I

A

winauto.ua

Step 5.

Snap the dual-T head adapter plate (K) onto the handlebar mount ball (L). Adjust the angle as needed and screw the semble the ball plate and swivel head (E) around the rubber rings. Secure the mount assembly by using the screwdriver threaded tightening (M) ring onto the adapter plate until to retighten the two mounting screws into the screw nuts the plate is securely held in place.

(F) through the screw holes.

F

K

E

M

L

D

F

!

Safety Precautions

Do not reposition the pedestal while cycling or driving. Arkon

Resources, Inc. does not promote the adjustment of mobile devices except when the bicycle or vehicle is safely parked or stopped.

Arkon is not responsible for any damages caused to your bicycle, your device, or yourself due to the installation or use of this product.

®

Consumer Hotline:

USA (800) 841-0884

INT’L (626) 254-9005

The Mobile Mounting Specialists™

Monday - Friday 9 am - 5 pm, PST www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in China

© Copyright 2010 Arkon Resources, Inc.