Amendment-I : [UNOPS-HAR-IPO-01

STATE HEALTH SOCIETY, NRHM – HARYANA
Through
United Nations Office for Project Services, 11 Golf Links, New Delhi-110 003
INTERNATIONAL COMPETITIVE BIDDING
FOR THE
SUPPLY OF MEDICAL EQUIPMENTS
UNOPS IFB No. UNOPS-HAR-IPO-01-2009
Amendment –I, dated October 30, 2009
The following amendments are hereby made to the bid document for the supply of Medical
Equipments for the Govt. hospitals of Haryana, with reference to above IFB:
Sl.No
1.
Reference
For
Where ever appearing in the bid document
Sale
LAST DATE AND TIME FOR
Of Bids
SALE OF BID DOCUMENT:
Receipt
Of Bids
Opening
of Bids
2.
1200 hrs on 06-11-2009
LAST DATE AND TIME FOR
RECEIPT OF BID:
1200 hours on 16-11-2009
LAST DATE AND TIME FOR
RECEIPT OF BID :
1400 hrs on 06-11-2009
LAST DATE AND TIME FOR
RECEIPT OF BID:
1400 hours on 16-11-2009
TIME AND DATE OF OPENING
OF BIDS:
1415 hrs. on 06-11-2009
TIME AND DATE OF OPENING
OF BIDS:
1415 hours on 16-11-2009
Bid Security
ITB 29.3
3.
Read
The Bid Security shall be issued by an
internationally recognized bank; i.e. a bank
that is certified by the central bank to
operate as commercial bank in the country.
The Bid Security shall be submitted in
original and in favor of UNOPS
(Reference: UNOPS-HAR-IPO-01-2009).
The Bid Security shall be minimum 3% of
the quoted value of the schedule and shall
be in Indian rupees or in US Dollars.
The Bid Security shall be issued by an
internationally recognized bank; i.e. a bank
that is certified by the central bank to operate
as commercial bank in the country. The Bid
Security shall be submitted in original and in
favor of UNOPS (Reference: UNOPS-HARIPO-01-2009). The bid security will be in
Indian rupees or in US Dollars. The
amount of bid security required is
specified in the Schedule of
Requirements as hereinafter amended.
If the bidder is submitting bid for more
than one Schedule, the amount of the Bid
Security shall be sum of the bid security
amounts for the respective Schedules.
ITB 24 : Incidental Services
Add after Sub-clause (f) :
Also, the bidder will provide necessary particulars of the items/spares covered under the
warranty.
Amendment-I : [UNOPS-HAR-IPO-01-2009]
1
4.
Section II.
Technical Specifications
The Technical Specifications are replaced by the following :
See Annexure
5.
Section III.
Schedule of Requirements
The Schedule of Requirements is amended and replaced by the following:
SCHEDULE OF REQUIREMENTS
PRODUCT DESCRIPTION
SCHEDULE
No.
Bid Security
Quantity
Cardiac Equipment
1
Cardiac Monitor with defibrillator
Ear Nose Throat Equipment
20
2
11
Operating Microscope (ENT)
In
Indian
Rupees
In USD
210,000.00
4,550
396,000.00
8,550
67,500.00
1,500
900,000.00
19,400
195,000.00
5,000
60,000.00
1,300
840,000.00
18,100
EYE Equipment
3
A Scan
9
4
a. Phaco Machine
b. Operating Microscope
15
15
5
Slit Lamp
13
Operation Theatre Equipment
6
TURP Set
5
7
Surgical Laparoscope
8
7,700
8
Single Puncture Laparoscope
17
357,000.00
Laboratory Equipments
9
Binocular Microscope
34
10
Emergency Resuscitation Kits
41
11
Open Chair Trolleys for Infants
19
12
Double Surface Phototherapy Unit for
Paediatrics
19
40,800.00
900
430,500.00
9,300
85,500.00
1,850
39,900.00
900
Others
Amendment-I : [UNOPS-HAR-IPO-01-2009]
2
Delivery Schedule (including installation, commissioning & training):
Delivery, installation, commissioning and maintenance training in respect of all
Consignees within 60 days from the date of issue of the Notification of Award (also see
Note below).
Note: For the training of medical/ para-medical personnel, wherever applicable, additional
5 days will be provided.
Terms of Delivery:
i.
For Goods from outside India; DDP Final consignee destination as per Consignee
Distribution List given below.
ii.
For Goods from within India: Free delivery to consignee as per Consignee Distribution
List given below.
Amendment-I : [UNOPS-HAR-IPO-01-2009]
3
1
2
3
Cardiac Equipment
Cardiac Monitor with defibrillator
Ear Nose Throat Equipment
Operating Microscope (ENT)
Eye Equipment
A Scan
a. Phaco Machine
Total Qty
Yamuna Nagar
(TC)
Sirsa
Rewari (TC)
Palwal
Panipat (TC)
Narnaul
Kurukshetra
Kaithal
Karnal
Jind
Jhajjar (TC,
Bahadurgarh)
Mewat
Fatehabad
Schedule
Description of item/ Equipment
No.
Ambala (TC)
Consignee Distribution List
2
1
1
2
1
1
1
2
2
1
2
1
1
2
20
1
0
0
1
1
1
1
0
1
1
1
1
1
1
11
1
1
1
0
0
0
0
1
1
1
1
1
0
1
9
1
1
1
2
1
1
1
1
1
1
1
1
1
1
15
1
1
1
2
1
1
1
1
1
1
1
1
1
1
15
1
1
1
2
0
1
0
1
1
1
1
1
1
1
13
1
1
2
1
1
0
1
1
0
1
1
1
1
1
1
1
1
0
1
1
1
2
1
1
0
0
1
0
0
2
1
0
1
0
0
1
0
1
5
8
17
8
2
0
1
1
10
1
0
2
1
4
1
2
1
34
5
1
2
1
3
2
1
0
0
4
1
1
4
1
2
1
2
2
1
1
6
2
8
0
4
2
2
1
41
19
0
1
1
0
0
1
2
2
2
0
4
3
2
1
19
4
5
6
7
8
9
10
11
12
b. Operating Microscope
Slit Lamp
Operation Theatre Equipment
TURP Set
Surgical Laparoscope
Single Puncture Laparoscope
Laboratory Equipment
Binocular Microscope
Other Equipment
Emergency Resuscitation Kits
Open Chair Trolleys for Infants
Double Surface Phototherapy Unit
for Paediatrics
Amendment-I : [UNOPS-HAR-IPO-01-2009]
4
Contact Details of Consignees
Sr.
No.
District
1 Ambala
2 Fatehabad
3 Jhajjar
4 Jind
5 Kaithal
6 Karnal
7 Kurukshetra
8 Mewat
9 Narnaul
10 Panipat
11 Rewari
12 Sirsa
13 Yamunanagar
14 Palwal
Mobile No
STD
Code
Telephone E Mail id
Number
Name & Address of
Consignee with Pin
Code Number
Name and
Designation of
Contact Person
Dr. O.P. Arya, Civil
Hospital, Ambal Cantt
Dr. Dinesh Dhillon, Civil
Hospital, Fatehabad
Dr. RS Dalal, Civil
Hospital, Jhajjar
Dr. SK Aggarwal, Civil
Hospital, Jind
Dr. Ram Pal Dhahiya,
Civil Hospital, Kaithal
Dr.(Mrs) Naresh Saini,
Civil Hospital, Karnal
Dr. Parveen Garg, Civil
Hospital, Kurukshetra
Dr. HS Randhawa, Civil
Hospital, Mandikhera,
Mewat
Dr. Ravinder Mathur,
Civil Hospital, Narnaul
Dr. SS Punia, Civil
Hospital, Panipat
Dr. HR Yadav, Civil
Hospital, Rewari
Dr. SK Sharma, Civil
Hospital, Sirsa
Dr. JR Bansal, Civil
Hospital, Yamuna Nagar
Dr. Aditya
Chaudhary,Civil Hospital
Palwal
Dr. O.P. Arya, Civil
Surgeon
Dr. Dinesh Dhillon, Civil
Surgeon
Dr. RS Dalal, Civil
Surgeon
Dr. SK Aggarwal, Civil
Surgeon
Dr. Ram Pal Dhahiya, ,
Civil Surgeon
Dr.(Mrs) Naresh Saini,
Civil Surgeon
Dr. Parveen Garg, Civil
Surgeon
09354197285/
9215156170
171
2557473/2557560
9215156173
1667
225899/225898
9215156177
1251
254014
dhs.csjjr@hry.nic.in
1681
269039
dhs.csjnd@hry.nic.in
1746
230262
dhs.csktl@hry.nic.in
184
2267696/2267907
dhs.csknl@hry.nic.in
1744
290344/291512
dhs.cskkr@hry.nic.in
Dr. HS Randhawa, Civil
Surgeon
9215156181/9
416437688
1268
273010
dhs.csmwt@hry.nic.in
9215156182
1282
251237
dhs.csmhn@hry.nic.in
9215156183
180
2630275/2648727
9215156186
1274
256769
dhs.csrwr@hry.nic.in
9896874070/9
215156176
9999004576/9
215156179
9215156178/9
355313318
9416042844/9
215156180
dhs.csftb@hry.nic.in
Dr. Ravinder Mathur,
Civil Surgeon
Dr. SS Punia, Civil
Surgeon
Dr. HR Yadav, Civil
Surgeon
Dr. SK Sharma, Civil
Surgeon
Dr. JR Bansal, Civil
Surgeon
9215156187
1666
240155
dhs.cssrs@hry.nic.in
9812161272/9
215156172
1732
237811
dhs.csynr@hry.nic.in
Dr. Aditya Chaudhary,
Civil Surgeon
9254255370/9
896020188
1275
242102/252102
All other terms and conditions of the bid document remain unaltered.
Amendment-I : [UNOPS-HAR-IPO-01-2009]
dhs.csamb@hry.nic.in
5
dhs.cspnp@hry.nic.in
cspalwal@gmail.com
Annexure
to Amendment-I
SECTION II : TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS OF MEDICAL EQUIPMENTS
FOR HOSPITALS OF GOVT. OF HARYANA
Schedule No. 1 : Cardiac Monitor with Defibrillator
1.
Description of Function
Defibrillator is required for reviving the heart functions by providing selected quantum of
electrical shocks with facility for monitoring vital parameters.
2.
Operational Requirements
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
Defibrillator should be Bi-Phasic, light weight and latest model.
Should monitor vital parameters and display them.
Should print the ECG on thermal recorders.
Should work on Manual and Automated external defibrillation (AED) mode. Manual
selection of 200 J or more.
Should be capable of doing synchronized & asynchronized cardioversion.
Can be operated from mains as well as battery.
Should have defibrillator testing facility.
Demonstration of the equipment is a must.
3.
Technical Specifications
3.1
Should be a Low Energy Biphasic defibrillator monitor with Recorder having capability
to arrest all arrhythmia within a maximum energy of 200 J or more.
Should monitor ECG through paddles, pads and monitoring electrodes and Defibrillate
through pads and paddles. Should have Automatic Lead switching to see patient ECG
through paddles or leads.
Should measure and compensate for chest impedance for a range of 25 to 150 ohms.
Should have a built in 50 mm strip printer/ thermal recorder.
Should have charging time of less than 10 seconds for maximum energy. Charging
indicator should be there.
Should have electroluminescent/LCD display for viewing messages and ECG waveform
of 4 seconds.
Should have external paddles with paddles contact indicator – for good paddle
contact. Single Adult and pediatric paddles should be available.
Should have event summary facility for recording and printing at least 250 events and 50
waveforms.
Should have a battery capable of usage for at least 90 minutes or 30 discharges.
Should be capable of printing Reports on Event summary, configuration, self test, battery
capacity etc.
Should have facility for self test/ check before usage and set up function.
Should have SPO2 and NIBP integrated facility - Both functions are mandatory.
Should have user friendly 1,2, 3 color-coded operation.
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.12
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
6
Annexure
to Amendment-I
4.
System Configuration Accessories, spares and consumables
4.1
4.2
4.3
4.4
4.5
4.6
4.8
4.9
Defibrillator – 01
Paddles Adult/ Paediatric (pair) – 01
Patient cable – 02
ECG Rolls – 50
Disposable pads – 10 nos.
NIBP Cuff Adult – 02
NIBP Cuff Paediatrics – 02
4.7
Reusable SPO2 Finger Probe – Adult – 02
Reusable SPO2 Paediatric Finger Probe – 02
Complete set of ECG Leads – 02
Trolley with lockable, noiseless wheels.
5.
Environmental factors
5.1
The unit shall be capable of operating continuously in ambient temperature of 10-40°C
and relative humidity of 15-90%.
The unit shall be capable of being stored continuously in ambient temperature of 0-50°C
and relative humidity of 15-90%.
Shall meet IEC-60601-1-2 : 2001 (or Equivalent BIS) General Requirements of Safety
for Electromagnetic Compatibility.
5.2
5.3
6.
Power Supply
6.1
6.2
Power input to be 220-240 VAC, 50 Hz
Resettable overcurrent breaker shall be fitted for protection.
7.
Standards, Safety and Training
7.1
7.2
Should be FDA or CE approved product.
Electrical safety conforms to standards for electrical safety IEC-60601-1 General
Requirements and IEC-60601-2-25 Safety of Electrocardiograms (or Equivalent BIS
Standard).
Drop Test – Withstands 1 meter drop to any edge, corner or surface.
Should conform to international test protocols on exposure to shock forces and to
vibration forces. The standard should be documented.
Should meet IEC 529 Level – 2 (IP2X) for enclosure protection solid foreign object
ingress.
Should meet IEC 529 Level – 3 (IP3X) (spraying water) for enclosure protection, water
ingress.
Should have local service facility. The service provider should have the necessary
equipments recommended by the manufacturer to carry out preventive maintenance test
as per guidelines provided in the service/ maintenance manual.
Comprehensive warranty for 5 years and provision of AMC for next 5 years.
Documentation
User Manual in English.
Service manual in English.
List of important spare parts and accessories with their part number and costing.
7.3
7.4
7.5
7.6
7.7
7.8
8.
8.1
8.2
8.3
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
7
Annexure
to Amendment-I
8.4
8.5
8.6
as
8.7
8.8
Certificate of calibration and inspection from factory.
Log book with instruction for daily, weekly, monthly and quarterly maintenance
checklist. The job description of the hospital technician and company service engineer
should be clearly spelt out.
List of Equipments available for providing calibration and routine maintenance support
per manufacturer documentation in service/ technical manual.
Compliance Report to be submitted in a tabulated and point wise manner clearly
mentioning the page/ para number of original catalogue / data sheet. Any point, if not
substantiated with authenticated catalogue/ manual, will not be considered.
Must submit user list and performance report within last 5 years from major hospitals.
Schedule No. 2 : Surgical Operating Microscope for ENT with standard
accessories
1.
2.
Magnification
Working length
:
:
3.
Focusing
:
4.
Eyepieces
:
5.
Main Illumination
:
6.
Illumination
:
7.
Field diameter
:
8.
Emergency lamp
:
9.
Control Unit
:
10.
Binocular tube
:
11.
12.
13.
14.
Beamsplitter
Magnification
Field of View
Hand grip
:
:
:
:
15.
16.
Foot switch
Camera
:
:
Zoom 6.1 motorized.
200 mm to 470 mm variable through motorized
multifocal lens : manually adjustable.
Motorized or manual via multifocal lens, manual via
swing arm.
Wide-field eyepiece for spectacle wearers 10 x 21 B.
Dioptric setting +/- 5 with adjustable eye cup.
High performance 300 watt xenon lamp through fiber
optic.
Illumination field diameter with white light
distribution.
Automatically adjusted to the field of vision and
manually adjustable.
15-21 V/150 watt. Halogen lamp through fiber optic.
Automatic changeover of the lamp in failure.
Graphical LCD display with background lighting,
menu with up to eight user defined setting, with
integrated self diagnostic system, Hospital & pt data,
scale projection Video system.
Variable angle of observation with adjustable 30 deg.
– 150 deg. 0 deg.-180 deg. Straight or angled
binocular tubes for main assistant surgeon.
50% / 50%.
1.2 x 12.8 x with 10 x eye piece.
16.5 mm – 180 mm with 10 x eye piece.
Control for microscope zoon adjustments, controls for
variable working distance via multifocal lens.
Zoom, working distance, focus light illumination.
Should be 3 chip CCTV with C-mount, powercable,
sony cable for CCU/ Camera/ recording system with
adaptors and attachment with existing Monitor,
Laptop.
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
8
Annexure
to Amendment-I
17.
18.
19.
19.
Bulb
Fiberoptic cable
:
:
Halogen Bulb (150 W) extra (10 nos)
One cable extra for Microscope.
All cables should be integrated in the stand for protection.
Schedule No. 3 : A-SCAN
Specifications
• A-Scan probe with 10+10% MHZ frequency.
• Power supply 220 V+- 10%, 50 HZ.
• Minimum four IOL calculation formulas
• Incorporated menu driven facilities
• {Probe should be small (3mm), soft/solid & should incorporate internal fixation light
• Should have memory of atleast 5 scans.
• Should have printer
• Should have option for manual and automatic operation
• Audible Guidance to axial alignment
• Weight less than 5 Kg and should be portable.
Measurement Parameters:
• Patient measurement accuracy+-10% 0.02mm
• Clinical accuracy+- 0.1mm
• Measurement limits – range to 38 mm
Model
Accessories
Warranty
:
:
:
:
:
:
:
CE Mark (or) FDA approved
Dust cover one
Printing Paper one dozen
Probe Case
Extra Fuses 10
Hydraulic
Two years after satisfactory installation.
Instruction booklet: User manual should be provided.
Maintenance support:
Bidder should state the arrangements that exist to provide post warranty period support
for maintenance of the instrument that will be located in the various District Hospital/ medical
colleges of the mentioned in scheduled of requirements/ list of consignees. The Bidder should
guarantee availability of spare parts & technical knowhow for maintenance services with in
India/ State for at least 5 years after the expiry of warranty period and should indicates the
complete address of the place(s) where such services are available and number of technical
personnel engaged for this purpose.
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
9
Annexure
to Amendment-I
Approval of the equipment subject to Demonstration:
•
•
•
•
•
•
CMC for period of 5 years after warranty period.
Proof of installation in Government/ reputed private Institutions.
Bank guarantee as per GFR rules.
Rates of 5 years CMC after warranty period must be mentioned in the bid.
List of commonly used serviceable/ consumables spares and their cost should be provided
The specifications are generalized in nature and does not favour any particular Brand or
Company.
Schedule No. 4
(a)
Phaco Machine
Phaco Emulsification
Equipments, material and workmanship that meet the authoritative standards and which ensure at
least substantially equal quality than the standards mentioned below will also be acceptable.
Specifications:
Electrical
Main Voltage: 110VAC+/- 10%@3.0 Amp max; 40/60 Hz & 220 VAC +/- 10% @ 1.5 Amp
max; 40/60 Hz
Dlathermy
Type
:
Bipolar
Output Power :
12 Watt max
Hand piece :
Bipolar micro forceps, pencil eraser (electrode for wet field
coagulation)
Controls
:
Select the R.F. level desired (0 to 99%) on the front panel.
Output
:
On/ Off via foot switch
I/A
Vaccum Range
Flow rate range
Irrigation flow
:
:
:
Panel Mode
:
0 to 600 mmHg
0 to 40 cc/min
Regulated by the height of the irrigation source (gravity
fed)
Linear control of the vacuum level via footswitch.
Vitrectomy
Handpiece Type (IPC): 30 psi, semi-disposable or re-usable pneumatic powered
guillotine cutter (Minimum two piece
Cutting Rage
:Minimum 50 to 500 cut per minute.
Port size
:Adjustable port size from 0.2 to 0.7 mm
Actuating System
:Built in internal compressor/external compressor.
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
10
Annexure
to Amendment-I
Panel Mode
Surgeon Model
:Select the maximum cutting range from 50 to 500 cuts minimum
per minute
:Linear aspiration flow via footswitch.
Phaco Emulsification
Hand piece Type
piece.
Frequency
Pulse Mode
Stroke
Panel Mode
Surgeon Mode
Footswitch Position
: Approximatiely 40/42 KHz.
: From 1 to 90 pulses per minute.
: Approximatiely 100 µm (4 mils)
: the maximum U/S power desired can be preset.
: Linear control of U/S power via footswith.
: 1. Irrigation, 2. Irrigation/ Aspiration, 3. Irrigation/ Aspiration, Phaco
IRRIGATION
Fluid Flow
: Regulated by the height of the irrigation source (gravity fed)
: Peizokinetic (autoclavable) (4-6 crystals) 2 Hand
INSPIRATION PUMP
Type
: Peristaltic pump
Tips
: 00, 150, 300, 450 one each
REFLUX
Continuous Flow
VENT
Type
TUBING
Type
: Reflux from the irrigation source according to the bottle height.
: Sterile fluid vent. Vent from the irrigation bottle should have a duration
of 0.3 seconds.
: Sillico ne reusable tubing (autoclavable) – 2 sets (high vac.) con
collapsible.
AQOUSTIC SOUND
Vacuum Tone
: Audible proportional tone that changes according to the vacuum value.
Diathermy Tone
: A pulse beep/tone that confirms the irrigation.
Reflux tone
: A continuous beep tone that confirms the reflux action.
Vent Tone
: A shot beep that confirms the venting action.
FOOT SWITCH
Type
FRONT PANEL
Display
Controls
Attachments
: 3 Switches; mode select, reflux and irrigation. Linear Control
: Alfa, Numerical LCD/LED display of the selected functions, bargraphs, and
indicators.
: Touch controls knobs to preset the vacuum level, flow rate, cutting
rate, and RR Power
: Piesokinetic handpiece diathermy forceps, and vitrectomy handpiece
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
11
Annexure
to Amendment-I
BLACK PANEL
Display
: AC power switch (110/220 VAC), main power socket, footswith
connector, volume knob and earth connection (screw).
Spares (cost if quoted separately would be added to the bid price for evaluation and comparison
purpose)
1. sleeves – 5
2. Extra set of Tubing
3. Disposal bags – 10
Accessories/ Facilities : essential (cost if quoted separately would be added to the bid price for
evaluation and comparison purpose)
Marking
: Should have engraved printing marking.
: manufacture serial No and Date of Manufacture should be legibly
mark.
Packing and Packaging:
• Equipment and detachable component shall be pack in a permanent box as in suitable grovees
with the same configuration so as to hold them intact without any movement or play to void
any damage during any transit.
• Should be packed in the separate boxes with the suitable packing cushioning.
Instruction Booklet:
• Should be provided with the instruction booklet with in the description of the instruments and
its functions and instructions fir use and maintenance for instruments.
• Service manual to be provided to the each equipment.
Quality requirements:
The manufacture should describe fully operational, quality plan in the bid. In addition each
instrument shall be tested by the manufactured after completion and prior to packing, for all
movement, adjustment and accuracy. Copies of such certificates for each test with reading recording
obtain shall accompany each equipments. This is over and above purchaser/ third part inspections that
may be stipulated in the contract.
Maintenance Support:
Bidder should state the arrangements that exist to provide post warranty period sport for
maintenance of the instruments that will be located in the various District Hospitals/ Medical Colleges
in the state mentioned in the Schedule of the requirement list of the consignees. The Bidder should
guaranteed availability of Spare parts and Technical knowhow for maintenance services within India
after the expiry of warranty period and should indicate the places where which services are available
and number of technical persons engaged for this purpose alongwith addresses and telephone numbers.
Guarantee:
One Year
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
12
Annexure
to Amendment-I
Warranty :
Two Years
Minimum life of the Equipment : 10 years
After- sales services arrangement (locally available) along with submission of schedule of the
services and name of the agency providing the services should be provided.
Approval of the equipment subject to Demonstration.
AMC for period of 10 Years
• Proof in installation in Government / reputed Private Institutions.
• Bank guarantee for completion of AMC for 10 years (1%) of the total cost of the equipment)
(b) : Operating Microscope
Specifications:
Type
: Galileo type, Inclined 45 degree Binocular tube
Magnification : Continuous or steps Zoom from 5x to 20x and Dioptric adjustment +5.0D
to 5.0 D
Focussing
: Motorized fine focusing with foot control.
Eye piece
: 10-12.5x
Objective
: f=175mm +/- 25 mm, 50HZ
IPD range
: 55 to 75 mm
Power supply : AC 220 V+/-10%, 50HZ
Illumination : Col fibre optic illumination with lamp housing 2 bulbs with change over
facilities, 12-15 volts, 100-150 watt bulb, illumination variation facilities. Illumination controlled
with continuous adjustment.
Filter : Filter switchable facility for occluding papillary light.
Stand
: Original floor stand.
Model
: CE Mark/ FDA Approved.
Attachment facilities : Binocular assistant microscope.
Spares
: Dust Cover – One
: Spare Bulb & fuse – Ten each
: CVT of adequate rating
: Serviceable and detachable caps for knobs (2 sets)
Warranty
: Two years after satisfactory installation.
Instruction booklet: User manual should be provided.
Maintenance Support.
Bidder should state the arrangements that exist to provide post warranty period support
for maintenance of the instruments that will be located in the various District Hospitals/ Medical
Colleges in the state mentioned in the Schedule of the requirement list of the consignees. The
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
13
Annexure
to Amendment-I
Bidder should guaranteed availability of Spare parts and Technical knowhow for maintenance
services within India/ State for atleast 5 years after the expiry of warranty period and should
indicate the places where which services are available and number of technical persons engaged
for this purpose. Approval of the equipment subject to Demonstration.
CMC for period of 5 Years
•
•
•
•
Proof in installation in Government / reputed Private Institutions.
Bank guarantee as per GFR rules.
Rates of 5 years CMC after warranty period must be mentioned in the bid.
List of commonly used serviceable/ consumables spares and their cost should be provided.
Schedule No. 5 : Slit Lamp
Specifications:
Type
: Minocular Bio-Microscope (HAAG STREIT TYPE)
Magnification: Step/ continous from 6x to 30x
Eye piece
: 10x to 12.5 X
Objective
: Paired 1X and 1.6X
IPD range
: 55 to 75 mm
Illumination : 6-12 volts, 20-50 watt bulb, halogen lamp/ tungston lamp illumination variation
facilites, AC power supply 220V to +/-10%, 50 Hz
Slit Illumination:
Slit Width
: Continuous 0 to 8mm
Slit Length
: Continuous 1 to 8 mm
Filters
: Red free, grey (neutral density), cobalt blue
Angle of slit rotation : 1800
Movement of Slit Lamp Assembly:
Longitudinal : 80 to 90 mm
Lateral
: 100 to 110 mm
Vertical
: 29 to 30 mm
Chin rest
: Vertical -60 to 80 mm
Table
: original motorized table
Model
: CE Mark
Provision for attachment of facilities for: Applanation Tonometer:
Accessories/ Spares : Applanaton Tonometer – One
: Dust Cover – One
: Spares Bulbs – Ten
: Chin rest paper- 2 pack
: Extra fuses – 10
Warranty
:
Two years after satisfactory installation.
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
14
Annexure
to Amendment-I
Instruction booklet: User manual should be provided.
Maintenance support:
Bidder should state the arrangements that exist to provide post warranty period support
for maintenance of the instrument that will be located in the various District Hospital/ medical
colleges of the mentioned in scheduled of requirements/ list of consignees. The Bidder should
guarantee availability of spare parts & technical knowhow for maintenance services with in
India/ State for at least 5 years after the expiry of warranty period and should indicates the
complete address of the place(s) where such services are available and number of technical
personnel engaged for this purpose.
Approval of the equipment subject to Demonstration:
CMC for period of 5 Years
• Proof in installation in Government / reputed Private Institutions.
• Bank guarantee as per GFR rules.
• Rates of 5 years CMC after warranty period must be mentioned in the bid.
• List of commonly used serviceable/ consumables spares and their cost should be
provided.
Schedule No. 6 : Cystoscope TURP
•
CYSTOSCOPE, should be wide angled, Direction 30°, dia 4mm, Area of viewing 90°,
Autoclavable.
•
CYSTOSCOPE SHEATH, should be 21Fr with two fixed stop cocks including Standard
Obturator.
•
ADAPTOR bridge with one instrument channels.
•
Continuous Flow Outer Sheath should be 26 FR. Rotatable with one stop cock consisting
of inner sheath 24FR with one stop cock including Standard Obturator.
•
Working Element should be passive cutting assisted by spring electrode in resting
position, for use with all resectoscope sheaths.
•
Should be with HF Cord
•
Should be with Ball Electrode
•
Should be with Loop Electrode
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
15
Annexure
to Amendment-I
•
Should be with Flexible Biopsy forcep, Size - 7 Fr Length 400mm
•
Should be with Flexible Grasping forcep, Size - 7 fr. Length - 400mm
•
Should be with Adaptor for Ellic Evacuator
•
Should be with Ellic Evacuator (Microvasive)
•
Halogen light source 150 watts, twin lamp, fibreoptic cable 3.5 mm size and 230 cm
long.
•
21 FR Urethrotome sheath with cold knife.
•
Cutting loop 24FR-12 Nos. and Cold knife straight 6 Nos.
•
Formalin chamber and sterilization trays of appropriate size.
•
Kit for cleaning (Trocar brush – 4, cannula brush – 4, cleaning oil – 100 ml (4 bottles).
•
Offline UPS with ½ hrs backup.
Schedule No. 7 : Operating Laproscopy Set
(a) Laparoscopy TROLLEY
o Mobile unit tower with 5 adjustable unit shelves, 1 drawer, 1 Compartment for
unit connection cable, 1 cable channel, 1 winding bracket, 8 power sockets, 1
isolating transformer and power cable, 240V, 50Hz.
o Camera head holder.
o Device connecting cable, 150 cm long
o Device connecting cable, 250 cm long
o Universal CO2 bottle holder.
o UPS should be mounted on trolley.
Operating Laparoscopy System:
Specifications for High Definition Laparoscopy System
High Definition Three Chip Camera System
1. Camera console 220 v with universal coupler & Autoclavable camera head
2. Pure Digital signal with high definition video(1920*1080 P native resolution)
with aspect ratio 16:9 with DVI and DV and SDI output.
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
16
Annexure
to Amendment-I
3. Integrated Flexible Scope filter
4. Progressive scan technology
5. Brightness Control
6. Aperture Control
7. Automatic digital Image Enhancer
8. Digital zoom & white balance
9. Integrated Gain/shutter/Enhancement with brightness control
10. Two peripheral control on camera head
Video Output
1. 2 DVI output
2. 2 SVHS & 1 RGB out put
3. One Composite out put
Automatic Light source
1. 220 V, 300 W. Xenon Bulb(with one spare bulb)
2. Bulb Working life more than 400 hrs
3. Bulb life counter on light source
4. Automatic /Manual Light Adjustment
5. Stand By Mode
6. Universal Jaw Assembly to adapt any make of fiber optic cable without
adapter.
Fiber optic Cable
4.8mm to 6.5mm (approx.) 7.5 feet (approx.) long Snap Fit cable
Monitor
24” High Definition monitor, resolution 1920 X 1080 with DBI input,
option for wall mounting and desktop in same unit.
CO2 Insufflator
20 Litre of high flow
Microprocessor controlled unit
Soft Approach Pressure control for safe recovery of abdominal pressure
LED/LCD based central display monitor
Audio visual Alarm
Laparoscopes, Fully Autoclavable with working length 300mm
Wide angled distortion free view
Universal adaptor for other light sources
Yellow Glass index for optimum evenness of focus & contrast
0 degree, 10mm x 1
30 degree, 10 mm x 1
0 degree, 5mm x 1
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
17
Annexure
to Amendment-I
Instrument Set:
Laparoscopic hand instruments (reusable) with 310mm working length, take –
apart locking / unlocking mechanism, rotable with interchangeable handle with
monoploar diathermy attachment ( Except trocars and veress needle)
Veress needle 12 cm length 4
Veress needle 15 cm length 4
Carbon-di-oxide gas tubing 4
Trocars sleeves 11 mm 4
Reducer 11/5 mm 2
Trocars sleeves 5.5 mm 4
Trocars (pyramidal tip) 10 mm 4
Trocars (pyramidal tip) 5 mm 4
Trocars washer 5 mm 100
Trocars washer 10 mm 50
Laproscopic biopsy forceps 5 mm, 2
Maryland dissector 5mm with unipolar diathermy 2
Atraumatic graspers, 5mm 2
Metzenbaum scissors (5cm) with unipolar diathermy 2
Fan retractors 5 mm 2
Laproscopic cautery lead 4
Suction irrigation device with two way valve 2
L shaped hook electrode 5mm 2
Laproscopic bowel grasper 5mm, length 33-36 cm 2
Laproscopic spoon forceps 10mm length 33- 36 cm 2
Needle holder 5mm, 33 cm long 4
Laproscopic suction cannuala, 10 mm 2
Laparoscopic suction cannula 5 mm 2
Clip applicator 10 mm Large, Medium,
Claw forceps 10 mm – 2 nos.
Carbon Dioxide cylinders, 5 Kg each (3 in numbers)
Off line UPS, 2.2 KVA with one hr. backup.
Trocer brush (4), cannula brush (4), cleaning oil (100 ml) – 4 bottles for cleaning
of instruments.
Formalin chamber of appropriate size for instruments.
Compact combined suction and irrigation device.
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
18
Annexure
to Amendment-I
Schedule No. 8 : Single Puncture Laparoscope with CO2 Insufflators & Cold
Light
A. Single Puncture Laparoscope
Telescope Specifications:
Telescope 0 degree with parallel/straight eye piece, 10 to 12 mm diameter
Fibre optic light transmission incorporated; should be compatible with the commonly
available light cables (necessary adaptors should be provided)
Can be sterilized by autoclaving, cidex solutions and Formalin Chamber.
Should have 6 mm instrument channel/built-in ring applicator
Working length of 270-275 mm
Trocar & Cannula:
Cannula size + 1 mm more than the telescope diameter; should have an automatic valve and
stopcock for insufflations.
Trocar should have pyramidal tip.The length of the Trocar should be 160-170 mm and the
length of the canula should be 100-110 mm
Ring Applicator:
Ring applicator for use with parallel/straight eyepiece telescope compatible with the above
telescope, capable of loading two silastic rings.
Cones: Suitable cones for loading rings to the above applicator
Slide/guide: Suitable slides/guide for loading rings to the above applicator
Veress Needle: Veress Needle with spring loaded blunt stylet with luer lock and length of
10 cm
Veress Needle: Veress Needle with spring loaded blunt stylet with luer lock and length of
15 cm
Essential Spares:
i) Spare Washer: Spare washers for trocar and cannula and automatic valve
ii) Kits for cleaning: i) Trocar Brush(ii) Cannula Brush(iii) Cleaning Oil 100 ml
System Configuration Accessories, spares and consumables
System Configuration Accessories, spares and consumables
Telescope-
Trocar & Cannula for telescopes
Ring Applicator
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
Quantity
01
(160mm – 170mm )01 & (100mm –
110mm) - 01
02
19
Annexure
to Amendment-I
Trocar and Cannula for Ring Applicator
Cones
Slide/guide
Veress Needles( 10 cm)
Veress Needles( 15 cm)
Essential Spares per unit:
i) Spare Wash
Spare washers for trocar and cannula and automatic valve
ii) Kits for cleaning:
02
05
10
03
03
12
(a) Trocar Brush
2
(b) Cannula Brush
2
(c) Cleaning Oil 100 ml
2
Backlight material bags for light source and insufflators for easy carrying.
Environmental factors
Specifications
The unit shall be capable of being stored continuously in ambient temperature of 0 -50deg C
and relative humidity of 15-90%
The unit shall be specified for operation up to 45 deg C and 100% relative humidity
Standards & Warranty
Specifications
Should be FDA , CE,UL or BIS approved product
Comprehensive warranty and CMC as specified in Clause 2.
Manufacturer/Supplier should have ISO certification for quality standards.
Documentation
Specifications
User Manual in English
Service manual in English
Certificate of calibration and inspection.
User list to be provided with performance certificate.
Compliance Report to be submitted in a tabulated and point wise manner clearly mentioning
the page/para number of original catalogue/data sheet. Any point ,if not substantiated with
authenticated catalogue/manual, will not be considered.
Spare Parts List (with part nos.)
Test Requirements
Conformity with the technical specifications
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
20
Annexure
to Amendment-I
B. Carbon Dioxide Insufflators & Cold Light:
Specifications
Electronic CO2 insufflators with pin index connection
Should have an adjustable flow rate of 0 to 10 ltr. per minute and a pressure range adjustable
between 0-30 mm Hg.
Pressure and flow rate should be displayed on the front panel
Provided with Silicon autoclave tubing with luer attachment.
Instrument should work on a supply of 220-240 V, with a frequency of 50 Hz single phase.
Fit for purpose
High Pressure Hose: High Pressure Hose suitable to connect the insufflators with pin indexed
CO2 cylinder
Wrench Kit : Suitable for connecting the insufflators to CO2 cylinder
Carbon Dioxide Bottle: 5 Ltr.Carbon Dioxide bottle with pin index connection
Cold Light Source: Cold light source with dual control having 2 halogen lamps of 250 watts
ratings each; operatable on a 220-240 V and 50 Htz supply.
Backup light source compatible with SP and DP Laparoscope is also to be provided. Fit for
purposes.
Fibre Optic Light Cable : 4.5-10 mm in diameter, 180-200 cm in length compatible with the
cold light source and the commonly available telescopes (necessary adaptors may be provided)
Essential Spares (i) Main Cord: Compatible with insufflators and cold light source of 220-240
Volts.
( ii) Halogen Spare Lamps: Halogen spare lamps of 250 watts
Formalin Chamber (for Sterilization of Laparoscopes): Of appropriate size for sterilizing the
laparoscope
Tray for sterilization of Laparoscopes : Of appropriate size for sterilizing the laparoscope
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
21
Annexure
to Amendment-I
Environmental factors
Specifications
The unit should be capable of being stored continuously in ambient temperature of 0 -50deg C
and relative humidity of 15-90%
The unit should be capable of operating continuously in ambient temperature of 5 to 45 deg C
and relative humidity of 15-90%
Power Supply
Specifications
Power input to be 220-240VAC, 50Hz fitted with Indian plug
Suitable UPS – 1 KVA with maintenance free batteries for minimum one-hour back-up time
should be supplied with the system.
Standards, Safety and Training
Specifications
Should be FDA , CE,UL or BIS approved product
Comprehensive warranty and CMC as specified in Clause 2.
Manufacturer/Supplier should have ISO certification for quality standards.
Documentation
Specifications
User Manual in English
Service manual in English
Certificate of calibration and inspection
User list to be provided with performance certificate
Compliance Report to be submitted in a tabulated and point wise manner clearly mentioning the
page/para number of original catalogue/data sheet .Any point , if not substantiated with
authenticated catalogue/manual, will not be considered.
Spare Parts List (with part nos.)
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
22
Annexure
to Amendment-I
System Configuration Accessories, spares and consumables
ITEM
Carbon Dioxide Insufflators
QTY
01
High pressure hose for Insufflators
Wrench Kit
Carbon Dioxide bottles
Cold Light Source
Fibre Optic Light Cable
01
01
02
01
02
Essential Spares per unit
ITEM
Main Cord: Compatible with insufflators and cold light
source of 220-240 Volts.Halogen Spare Lamps: Halogen spare lamps of 250 wattsFormalin Chamber (Of appropriate size for sterilizing the
laparoscope
Sterilization Tray (Of appropriate size for sterilizing the
laparoscope)
QTY
02
02
01
02
Schedule No. 9 : Binocular Microscopes
Optical System :
•
Infinitely corrected optics par focal, plan achromatic lenses with anti fungal properties.
Illumination :
• Built in transmitted Koehler illumination.
• 6 V, 20 to 30 W halogen bulb.
• 220-240 V, 0.85/0.45A, 50 Hz.
Focusing :
• Stage height movement by roller guide (rock & pinion).
• Upper limit stopper.
• Tension adjustable on coarse focus adjustment knob.
Revolving nosepiece:
• Quintuple with inward tilt.
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
23
Annexure
to Amendment-I
Observation tube :
• Tube inclination – 30-45°.
• Interpupillary distance adjustment range – minimum 50 to 70 mm.
Stage:
• Movement range – 76 mm X – direction X 50 mm Y - direction.
• Rectangular scratch resistant stage with right hand control with double slide holder and
vernier calipers on X Y axis.
Condenser:
• Type – Abbe condenser.
• N.A. – 1.2 dry type.
• Aperture iris diaphragm – built – in.
Objectives, Plan Achromat 4x, 10x, 20x, 40x & 100x
Minimum working distance for 100 X should be 0.13 to 0.2 mm
Eyepiece
• 10X with FN 20
All the necessary adapters and power cords should be provided for functioning of microscope.
Schedule No. 10 : Resuscitation Kit
For using to resuscitate adult as well as pediatric cases. To be supplied in a carry bag with
following things
1. Should have laryngoscope blades of all sizes and pediatric and adult laryngoscopes
2. Should have adult and pediatric ambubags of silicone with oxygen reservoir bags and
oxygen tube to connect to oxygen cylinder
3. Face masks anatomical adult small, large, medium and pediatrics Rendell baker 00,0
4. Venti mask for oxygenation 2adult and 2 pediatrics
5. Foot suction with suction bottle
6. Combi tube for adults
7. Laryngeal Mask Airway size 2.5, 3 and 4 classic type
8. Endotracheal tubes of different sizes cuffed( size 5, 6, 7, 8mmID) and non cuffed for
paediatric use ( size 3,4, 4.5, 5)
9. Sty lets adults and pediatrics
10. Magil’s forceps one
11. Suction catheter size 10, 12, 14, 16 FG ( 2 each)
12. Syringes of different sizes 20, 10,5,2ml at least 5 each
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
24
Annexure
to Amendment-I
Schedule No. 11 : Open care system on trolley with drawers,
with radiant warmer, O2 – provisions
Technical Specification:
Mobile newborn resuscitation table with fixed – height radiant warmer.
Antistatic castors, 2 with breaks,.
Table surface with mattress with infant head/ shoulder support.
Mattress – padding: foam density approx 21-25 kg/m3
Mattress cover : removable with zipper, waterproof, washable, resistant to cleaning with
chlorine based solution and flame retardant.
Side borders transparent acryl, drop down and lockable
Under table 2 storage drawers
Side rails allow for mounting of accessories
Hood suspended above the table integrates heating element and overhead light
Overhead Light : 2*50 watt halogen spot, with dimming function
Integrated support for two 101 oxygen bottles
Heating elements: emitter with parboil reflector and protected by metal grid.
Control unit allows air and skin temperature present (LED indicator) and drives radiant
heater output (servo and manual)
Integrated timer: 1 to 59 min, with count up and count down feature.
Temperature range, skin : 34 to 38 c (user pre settable)
Monitoring of skin temperature by means of sensor, range : 30 to 42 C
Heater output : 0 to 100% in increment of 5 %
Control unit: audiovisual alarms according to timer and temperature present avoiding
overheating
Display reports systems errors, sensor failure
Power requirement : 220V/50Hz
Power consumption : 800 W
Device is produced by ISO 9001 certified manufacturer (certificate to be submitted, further
details see (technical provisions)
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
25
Annexure
to Amendment-I
Supplied with:
1x mattress
1x skin temperature probe (including connection cable)
1x spare skin temperature probe (including connection table)
1x spare heating element
2x empty 10 L oxygen cylinders
1 x spare of set of fuses
User manual with trouble shooting guidance in English.
Technical manual with maintenance and first line technical intervention instructions, in
English.
List of priced accessories.
List of priced spare parts
List with name and address of technical service provider in India.
Standards, Safety and Training
Equipment should compile IEC standard to insure safety against electrical shock and
fire. Equipment should be manufactured as per the guideline of FDA or CE
IEC 60601-1 Electrical Safety Certificate for Medical equipment should be provided
The manufacturer should be ISO certified and the equipment should be as per the relevant
guidelines of FDA/CE/BIS
Training and installation at end-user site
Proposal for full Warranty up to 5 years from date of installed properly, covering on call
technical intervention, spare parts and travel.
Schedule No. 12 : DOUBLE SURFACE PHOTO THERAPY UNITS
1 Description of Function
1.1
Phototherapy units are used to treat hyperbilirubinemia, a condition characterized
by high bilirubin concentrations in the blood.These units are also called: bilirubin
lamps, bilirubin lights, fiberoptic phototherapy blankets, neonatal phototherapy
units
2 Operational Requirements
2.1
The system should meet all the numerical values given in the technical
specifications within a tolerance of +/- 10 %.
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
26
Annexure
to Amendment-I
3 Technical Specifications
3.1
Technical Specifications:
1. It should be two-way of phototherapy unit i.e. one phototherapy lamp should be
from top and the other from below (both overhead and undersurface).
2. There should be option to use either of the lamps. In other words, whenever
only overhead exposure is desired, the attending health care provider may have
option to operate only the overhead lamp and not the lamp below the bed, and vice
versa.
3. Each lamp unit should be provided with 4 tubes CFL emitting blue radiation
between 450-480 nm wavelengths.
4. One each side of the panel of overhead tubes, day light tube should be provided
to facilitate observation of baby and for performing practical procedures whenever
required.
5. It should have height adjustment facility.
6. It should allow easy swiveling of box to allow positioning of portable x-ray
machine.
7. The unit should be mounted on stand having lockable wheels (castors) for easy
transportation from one place to other.
8. At the baby’s surface, the exposure should be 4-6 u W/cm/nm.
9. It should have an hour counter to show the usage of tube lights & one for
patient exposure.
10. The manufacture should give 3 years warranty of the system (except tube
lights).
4 System Configuration Accessories, spares and consumables
None
5 Environmental factors
5.1
The unit shall be capable of being stored continuously in ambient temperature of
0-50 deg C and relative humidity of 15-90%
5.2
The unit shall be capable of operating continuously in ambient temperature of 10 40 deg C and relative humidity of 15-90%
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
27
Annexure
to Amendment-I
6 Power Supply
6.1
Power input to be 220-240VAC, 50Hz fitted with Indian plug
6.2
UPS of suitable rating shall be supplied for minimum 1 hour backup for the entire
system
7 Standards, Safety and Training
7.1
Should be FDA or CE or UL or BIS approved product
7.2
Manufacturer should be ISO certfied for quality standards.
7.3
Comprehensive warranty for 3 years and 5 years CMC after warranty including
UPS.
7.4
Shall CERTIFIED to be meeting Electrical Safety requirements as per IEC 606012-50 Medical Electrical Equipment part-2-50 Particular requirements for the safety
of Infant Phototherapy Equipments
8 Documentation
8.1
User/Technical/Maintenance manuals to be supplied in English.
8.2
Certificate of calibration and inspection.
8.3
List of important spare parts and accessories with their part number and costing
8.4
Log book with instructions for daily, weekly, monthly and quarterly maintenance
checklist. The job descriptin of the hospital technician and company service
engineer should be clearly spelt out.
8.5
Compliance Report to be submitted in a tabulated and point wise manner clearly
mentioning the page/para number of original catalogue/data sheet. Any point, if
not substantiated with authenticated catalogue/manual, will not be considered.
NOTE: The purchaser has the right to include any further requirement, of labeling,
packing,etc at the time of issue of contract
THE PRODUCTS OFFERED ARE IN ACCORDANCE WITH THE SPECIFICATIONS
AND REQUIREMENTS AS DESCRIBED IN SECTION II & III.
YES
NO
ANY DEVIATION MUST BE LISTED BELOW:
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
28
Annexure
to Amendment-I
NOTE: The Bidder shall prepare the following table and submit along with the bid for
each schedule quoted.
Schedule No.……….
Technical specification
Name of Equipment…………….
Compliance
( Yes /No)
Page number where the
documentary evidence is
submitted
1.
2.
3.
Section-II : Technical Specifications [UNOPS-HAR-IPO-01-2009]
29
Download PDF