Remote Controller Manual - Inventor Air Conditioners

V4MVI-09WFR/V4MVO-09
V4MVI-12WFR/V4MVO-12
V4MVI-18WFR/V4MVO-18
V4MVI-24WFR/V4MVO-24
Wall Mounted Unit
Remote Controller
Manual
English
Thank you for choosing INVENTOR air
conditioning system. For correct use of
this unit, please read this manual
carefully and keep it for future
reference.
Remote Controller Specifications
CONTENTS
Model
RG57A8/BGEF
Rated Voltage
3.0V(Dry batteries R03/LR03 2)
Remote controller Specifications................................................... 2
Signal Receiving
Range
8m
Operation buttons .................. ......................................................... 3
Environment
-5 C~ 60C
Indicators on LCD ..........................................................................
6
How to use the buttons .................................................................
7
Auto operation.................................................................................
7
Cooling/Heating/Fan operation......................................................
7
Dehumidifying operation ...............................................................
8
Adjusting air flow direction............................................................
8
Timer operation...............................................................................
9
Handling the remote controller ...................................................... 13
ON/OFF
ECO
MODE
TIMER
ON
TEMP
NOTE:
FAN
Buttons design is based on typical model and might be slightly different from the
actual one you purchased the actual shape shall prevail.
All the functions described are accomplished by the unit. If the unit has no this
feature, there is no corresponding operation happened when press the relative
button on the remote controller.
,,
,,
there are wide differences between Remote controller Illustration and ,,
,
,
,,When
,,
USER'S MANUAL on function description, the description of USER'S MANUAL
shall prevail.
1
TIMER
OFF
SLEEP FRESH
SELF
TURBO CLEAN
LED FOLLOW
ME
2
Operation of buttons
1
2
ON/OFF Button
This button turns the air conditioner ON
and OFF.
Operation of buttons
8
MODE Button
Press this button to modify the air conditioner
mode in a sequence of following:
AUTO
COOL
DRY
HEAT
DOWN Button(
)
Push this button to decrease the indoor
temperature setting in 1oC increments to 17oC.
FAN
NOTE Temperature contol is not available
in Fan mode.
NOTE Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling only
appliance.
8
1
ON/OFF
ECO
9
2
MODE
TIMER
ON
10
TIMER
OFF
11
3
TEMP
3
4
5
6
7
FAN
12
SLEEP FRESH
SELF
TURBO CLEAN
4
LED FOLLOW
ME
13
14
9
1
ON/OFF
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
2
MODE
SLEEP Button
Active/Disable sleep function. It can
maintain the most comfortable temperature
and save energy. This function is available
on COOL, HEAT or AUTO mode only .
For the detail,
see ,, sleep operation ,, in
,,
,, USER ,S MANUAL.
ECO Button
Used to enter the energy efficient mode.
Under cooling mode, press this button, the
remote controller will adjust the temperature
automatically to 24OC, fan speed of Auto to
save energy(but only if the set temperature
is less than 24OC). If the set temperature is
between 24OC and 30OC, press the ECO
button, the fan speed will change to Auto,
the set temperature will remain unchanged.
NOTE:
Pressing the TURBO and SLEEP button,
modifying the mode or adjusting the set
temperature to less than 24OC will stop
ECO operation.
Under ECO operation, the set temperature
should be 24OC or more. it may result in
insufficient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
8
FAN Button
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.
5
UP Button(
)
Push this button to increase the indoor
temperature setting in 1oC increments to 30oC.
ECO
9
TIMER
ON
10
TIMER
OFF
11
TEMP
3
4
5
6
7
FAN
12
SLEEP FRESH
SELF
TURBO CLEAN
LED FOLLOW
ME
13
14
10
TIMER ON Button
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the autotimed setting 60 minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
11
TIMER OFF Button
FRESH Button
Active/Disable FRESH function. When the
FRESH function is initiated, the Ionizer/
Plasma Dust Collector(depending on
models) is energized and will help to
remove pollen and impurities from the air.
6
7
3
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temperature at cooling or heating operation in the
shortest time(if the indoor unit does not support
this function, there is no corresponding
operation happened when pressing this button.)
Press this button to initiate the auto-off time
sequence. Each press will increase the auto
-timed setting in 30 minutes increments.
When the setting time displays 10.0, each
press will increase the auto-timed setting
60 minutes increments. To cancel the autotimed program, simply adjust the auto-off
time to 0.0
SELF CLEAN Button
Active/Disable Self Clean function
4
Operation of buttons
Indicators on LCD
12 Swing
Button
Used to stop or start horizontal louver
movement or set the desired up/down
air flow direction. The louver changes 6
degree in angle for each press. If hold
down this button for more than 2 seconds,
the louver will swing up and down
automatically.
Information are displayed when
the remote controller is powered
up.
Mode display
AUTO
COOL
HEAT
FAN
Displayed when data transmitted.
Displayed when remote controller is ON.
Battery display(low battery detection)
8
Swing
1
ON/OFF
ECO
2
MODE
TIMER
ON
10
TIMER
OFF
11
TEMP
3
4
5
6
7
FAN
SELF
TURBO CLEAN
9
LED FOLLOW
ME
Button
Not available for this unit
Used to stop or start vertical louver
movement and set the desired left/right
air flow direction.The vertical louver
changes 6 degree in angle for each
press. If hold down this button for more
than 2 seconds, the louver will swing
left and right automatically.
12
SLEEP FRESH
DRY
Displayed when TIMER ON time is set.
Displayed when TIMER OFF time is set.
Show set temperature or room
temperature, or time under TIMER
setting.
13
14
Displayed in Sleep Mode operation.
13
FOLLOW ME Button
Push this button to initiate the Follow Me
feature, the remote display is actual
temperature at its location. The remote
control will send this signal to the air
conditioner every 3 minutes interval until
press the Follow Me button again. The air
conditioner will cancel the Follow Me feature
automatically if it does not receive the signal
during any 7 minutes interval.
Indicated that the air conditioner is
operating in Follow me mode
Not available for this unit
Not available for this unit
Fan speed indication
Low speed
Medium speed
14
High speed
LED Button
Disable/Active indoor screen Display. When
pushing the button, the indoor screen display
is cleared, press it again to light the display.
Auto fan speed
Note:
All indicators shown in the figure are for the purpose
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
5
6
How to use the buttons
How to use the buttons
Dehumidifying operation
Auto operation
2
3
ON/OFF
1
MODE
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of 17 OC~ 30OC in 1OC
increments.
3. Press the ON/OFFbutton to start the air
conditioner.
ECO
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
TIMER
ON
TEMP
TIMER
OFF
FAN
SLEEP FRESH
SELF
TURBO CLEAN
LED FOLLOW
ME
Cooling /Heating/Fan operation
2
4
ON/OFF
1
MODE
ECO
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17 OC~ 30OC in 1OC
increments.
3. Press the FAN button to select the fan speed
in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
TIMER
ON
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
TEMP
3
FAN
TIMER
OFF
SLEEP FRESH
SELF
TURBO CLEAN
2
3
ON/OFF
1
MODE
ECO
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature
can be set within a range of 17OC~ 30OC
in 1OC increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not switch the
fan speed. It has already been automatically controlled.
TIMER
ON
TEMP
FAN
TIMER
OFF
SLEEP FRESH
SELF
TURBO CLEAN
LED FOLLOW
ME
Adjusting air flow direction
Use the SWING
&
button to adjust
the desired airflow direction.
1. Up/Down direction can be adjusted with the
button on the remote controller. Each
time when you press the button, the louver
moves an angle of 6 degree. If pressing more
than 2 seconds ,the louver will swing up and
down automatically.
2. Left/Right direction can be adjusted with the
button on the remote controller. Each
time when you press the button, the louver
moves an angle of 6 degree. If pressing more
than 2 seconds ,the louver will swing left and
right automatically.
NOTE: When the louver swing or move to a
position which would affect the cooling
or heating effect of the air conditioner,
it would automatically change the
swing/moving direction.
LED FOLLOW
ME
7
7
8
Timer operation
Press the TIMER ON button can set the auto-on
time of the unit. Press the TIMER OFF button
can set the auto-off time of the unit.
To set the Auto-on time.
ON/OFF
ECO
TIMER
ON
MODE
TEMP
FAN
TIMER
OFF
SLEEP FRESH
SELF
TURBO CLEAN
LED FOLLOW
ME
1
2
1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
the time increases by half an hour between 0
and 10 hours and by one hour between 10 and
24 hours.
3. After setting the TIMER ON ,there will be a one
second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
! CAUTION
When you select the timer operation, the remote controller automatically transmits the
timer signal to the indoor unit for the specified time. Therefore, keep the remote
controller in a location where it can transmit the signal to the indoor unit properly.
The effective operation time set by the remote controller for the timer function
is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20,
21, 22, 23 and 24.
Example of timer setting
TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful when you want
the unit to turn on automatically before you return
home. The air conditioner will automatically start
operating at the set time.
Start
Off
Example:
Set
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set
desired Auto-off time. Each time you press the
button, the time increases by half an hour
between 0 and 10 hours and by one hour
between 10 and 24 hours.
3. After setting the TIMER OFF ,there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "H " will disappear and the set temperature
will re-appear on the LCD display window.
9
6 hours later
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting
of starting operation time and the signal "H"
will show on the display area.
2. Press the TIMER ON button to display "6.0H "
on the TIMER ON display of the remote
controller.
3. Wait for 3 seconds and the digital display
area will show the temperature again. The
"TIMER ON" indicator remains on and this
function is activated.
10
TIMER ON
TIMER OFF
(Off
Start
Stop operation)
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
TIMER OFF
(Auto-off Operation)
The TIMER OFF feature is useful when you want the
unit to turn off automatically after you go to bed. The
air conditioner will stop automatically at the set time.
Stop
On
Set
10 hours later
Example:
To stop the air conditioner in 10 hours.
1. Press the TIMER OFF button, the last setting of
stopping operation time and the signal "H" will
show on the display area.
2. Press the TIMER OFF button to display "10H " on
the TIMER OFF display of the remote controller.
3. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
OFF" indicator remains on and this function is
activated.
Start
Stop
Off
Set
2 hours later
after setting
5 hours later
after setting
Example:
To start the air conditioner 2 hours after setting,
and stop it 5 hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to display
2.0H on the TIMER ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to display
5.0H on the TIMER OFF display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
ON & TIMER OFF" indicator remains on and
this function is activated.
COMBINED TIMER
(Setting both ON and OFF timers simultaneously)
TIMER OFF
TIMER ON
(On
Stop
Start operation)
This feature is useful when you want to stop the air
conditioner after you go to bed, and start it again in
the morning when you wake up or when you return
home.
Start
Stop
On
Set
2 hours later
after setting
10 hours later
after setting
Example:
To stop the air conditioner 2 hours after setting and
start it again 10 hours after setting.
1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to display
2.0H on the TIMER OFF display.
3. Press the TIMER ON button.
4. Press the TIMER ON button again to display 10H
on the TIMER ON display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
ON OFF" indicator remains on and this function is
activated.
11
11
12
12
Handling the remote controller
Location of the remote controller.
8m
Use the remote controller within a distance of 8
meters from the appliance, pointing it towards the
receiver. Reception is confirmed by a beep.
CAUTIONS
The air conditioner will not operate if curtains,
doors or other materials block the signals from
the remote controller to the indoor unit.
Prevent any liquid from falling into the remote
controller. Do not expose the remote controller
to direct sunlight or heat.
If the infrared signal receiver on the indoor unit
is exposed to direct sunlight, the air conditioner
may not function properly. Use curtains to
prevent the sunlight from falling on the receiver.
If other electrical appliances react to the remote
controller, either move these appliances or
consult your local dealer.
Do not drop the remote controller. Handle with care.
Do not place heavy objects on the remote controller,
or step on it.
Using the remote controller holder(optional)
Replacing batteries
The following cases signify exhausted batteries.
Replace old batteries with new ones.
Receiving beep is not emitted when a signal
is transmitted.
Indicator fades away.
The remote controller is powed by two dry
batteries (R03/LR03X2) housed in the back rear
part and protected by a cover.
(1) Remove the cover in the rear part of the
remote controller.
(2) Remove the old batteries and insert the new
batteries,placing the(+) and (-) ends correctly.
(3) Install the cover back on.
NOTE: When the batteries are removed, the
remote controller erases all programming. After
inserting new batteries, the remote controller
must be reprogrammed.
CAUTIONS
Do not mix old and new batteries or batteries
of different types.
Do not leave the batteries in the remote
controller if they are not going to be used for
2 or 3 months.
Do not dispose batteries as unsorted
municipal waste. Collection of such waste
separately for special treatment is necessary.
The remote controller can be attached to a wall or pillar
by using a remote controller holder(not supplied,
purchased separately).
Before installing the remote controller, check that the
air conditioner receives the signals properly.
Install the remote controller with two screws.
For installing or removing the remote controller, move
it up or down in the holder.
13
14
Download PDF