Cl:::
w
C)
Cl:::
Cl:
:z::
(.)
~
Q)
:::J
en
Q)
"-
Q)
0
...__
>.
..c
:::J
...__
Cl:
.......
ro
E
en
·..c:
c:
:::J
ro
()
ro
Q)
~
"-
w
1-
~
m
Q
-
( .)
Q
..1
c:c
w
.....
A.
a..
Q)
en
ro
Q)
Q)
-c
ro
Cl:::
w
tl)
Cl:
z
c:c
:::::»
::E
"-
tl)
~
w
a::
m
w
z
~
~
1
0
A. Features:
8 SERIES BATTERY CHARGER SPECIFICATIONS
1. Short-circuit Protection ; Charger 0/P eut-off automatically when short circuit .
2. Overload Protection : Charger 0/P current-limited automatically when overload .
3. Reverse Polarity Protection : Charger 0/P eut-off automatically when battery
reverse connection .
4 . Automatic multi-rate charging function: CC , CV, Float
5. Parallel operation available : Parallel with battery as DC power supply operation
available .
6. 2 LED Display : LED1 Red (power on); LED2 Red (charging); Green (full) .
Model: KP12408
OC Output
OC Output Voltage-maximum : 14 .7V
DC Output Voltage-adjust range : None
OC Output Current-maximum:40A
DC Output Current-adjust range: None
AC Input
B. Operations:
1. Check if your local mains supply conforms to charger ' s input voltage 11 OV or 230V.
Th en connect the charger system to a wall socket strongly.
Warning: Do not connect to a wrong input voltage. or charger will be broken.
2. LED1 RED confirms AC power on, and the LED2 GREEN confirms charger connects weil.
Note: If the charger has a Power Switch at AC si de please tu rn on it firstly
3. Connect the plug or OC Output cord to battery terminais
LED21ight turns to RED, and if goes to GREEN, it confirms battery tully charged.
(N- Positive+ ; L- Negative-; Brown- +ve terminal, Blue- -ve terminal) .
Note: If this charger with a Relay for Reverse Polarity Protection, it doesn't have output
voltage and current wh en charger power on but disconnecting with the battery.lt will have ·
voltage and current output wh en it connects with battery. If the charger don't have a Relay
for Reverse Polarity Protection, it has output once the power on.
AC Input Voltage-range: 189-264VAC
AC Input Voltage-nominal : 230VAC
AC Input Frequency: 50-60Hz:
Mechanical
Dimensions: 260 x 150 x 90mm
Net Weight: 3.5KG.
OperatingTemperature : 14"F-113.F (-10-45 "C)
Storage Temperature: -4o·F-158"F (-40-70 "C)
AC Input: Customized, 1.5 metre cable
DC Output: Customized, 1.5 metre cable
Charging Mode
·······Voltage
V. l
~'\
CC (constant current) Stage :40A
C. Notices:
1. Charger will tu rn off automatically if it was not connected to battery for
1-3 minutes after power on, please start it.again.
2 . This charger is designed for charging Lead Acid battery. LiFeP04 battery
is available after adjustment.
3.The battery maybe damaged if LED2 cannot be changed to green after long
time charging .
CV (constant voltage) Stage : 14. 7V, 40A ~
Float Stage : 13.8V, BA
.
Regulatory
-..\ "..····
1
•••• •••
4 . Always place the charger in well-ventilated and dry environments .
Packing List:
5.The charger is designed by aluminum housing as itself heat sink, don ' t cover
it avoiding over temperature on the case when charging .
• Charger 1
• User Manual 1
6. Charger should be power on for 2 hours once a month .
• OC Power co rd 1
• AC Power cord 1
: vl
·'<IV..
'··················
r~
.......·
" ldl•
Safety Standard : CE Listed
Safety-Europe: EN60335-2-29 :2002
v. ..
....- ..........
- - Current
1
~l;!ll•
~
~ ~Tim e
\l;Oil•
Charging Curve
Download PDF