- TVC Communications
Test Equipment Catalog
CATV/RF Test
Fiber Optic/FTTx Test
VoIP/Telecom Test
Network/Ethernet Test
Electrical/Voltage Test
Satellite Test
Fiber Optic Splicers
Underground Cable Locators
www.tvcinc.com
Table
Contact Us
US Locations
Canada Locations
www.tvcinc.com
www.tvccanada.com
Vikimatic
Headquarters
800 Airport Road
Annville, PA 17003
Calgary
27 Chapala Grove SE
Calgary, AB T2X 3V5
403.612.9511 ph
403.254.4197 fax
1.800.387.4445 toll free
600 Plum Creek Drive
Wadsworth, OH, 44281
800.345.8454 ph
330.336.7650 fax
181 Fulling Mill Road, Ste 2
Middletown, PA 17057
888.644.6075 ph
717.944.7446 fax
2330 Artesia Ave, Unit A
Fullerton, CA 92833
888.644.6075 ph
714.879.8788 fax
7321 Trade Court
Sarasota, FL 34241
888.644.6075 ph
941.907.2231 fax
550 West Valley Ridge Blvd
Lewisville, TX 75057
888.644.6075 ph
972.436.3875 fax
NCTC Team
www.tvcinc.com
130 Industrial Drive
Chambersburg PA 17201
800.233.7600 ph
800.847.9473 ph
717.263.1547 fax
Halifax
35 Commercial Street, Suite 208
Truro, NS B2N 3H9
902.843.4060 ph
902.843.4061 fax
1.888.674.2641 toll free
Montreal
884 Place Trans Canada
Longueuil, QC J4G 2M1
450.674.2641 ph
450.674.1554 fax
1.888.674.2641 toll free
Toronto
280 Hillmount Road, Units 1 & 2
Markham, ON L6C 3A1
905.477.7772 ph
905.477.9665 fax
1.800.319.9933 toll free
Vancouver
1.11393 Kingston Street
Maple Ridge, BC V2X 0Y7
604.465.0068 ph
604.465.0849 fax
1.800.387.4445 toll free
Latin American Locations
www.tvclatinamerica.com
2105 N.W. 102nd Avenue
Miami, FL 33172
305.716.2160 ph
305.716.2161 fax
Mexico
Voice, Video and Data Distribution
de Mexico S. de RL de CV
Xola 613 Modulo 2, P.B.
Colonia del Valle
Mexico City, Mexico CP 03100
011.52.55.5639.2926 ph
011.52.22.5639.2926 x102 fax
www.vikimatic.com
15085 La Palma Drive
Chino, CA 91710
888.484.5462 ph
909.393.8009 fax
550 West Valley Ridge Blvd
Lewisville, TX 75057
877.215.2281 ph
972.436.3875 fax
6900 East Bayou Gulch Rd
Parker, CO 80134
720.842.1861 ph
720.851.6715 fax
White Sands Engineering
www.whitesandsengineering.com
21615 N. 27th Ave
Phoenix, AZ 85027
800.586.7377 ph
623.581.0331 ph
623.582.2915 fax
Satellite Engineering Group
www.sateng.com
11605 South Alden
Olathe, KS 66062
800.932.1555 ph
913.324.6000 ph
913.324.6050 fax
of
Contents
CATV/RF Test
Network/Ethernet Test
Signal Level Meters . . . . . . . . . . . . . . TE1.1 - TE1.2
Return Path Test. . . . . . . . . . . . . . . . . . . . . . . TE1.3
Network Wire Mappers . . . . . . . . . . . . . . . . . TE4.2
Test Probes. . . . . . . . . . . . . . . . . . . . . . . . . . . TE1.3
Carrier Ethernet Testers . . . . . . . . . . . TE4.2 - TE4.3
Network Testers. . . . . . . . . . . . . . . . . TE4.1 - TE4.2
Signal Leakage . . . . . . . . . . . . . . . . . . . . . . . . TE1.4
Gigabit Ethernet Link Testers. . . . . . . . . . . . . TE4.4
TDRs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TE1.5
BERT Testers. . . . . . . . . . . . . . . . . . . . . . . . . . TE4.4
Spectrum Analyzers . . . . . . . . . . . . . . . . . . . . TE1.6
Wi-Net Wireless Testers. . . . . . . . . . . . . . . . . TE4.4
Video/MPEG Test . . . . . . . . . . . . . . . . TE1.6 - TE1.7
PinOut Testers. . . . . . . . . . . . . . . . . . . . . . . . . TE4.4
Tones & Probes. . . . . . . . . . . . . . . . . . . . . . . . TE1.8
CAT 5, 5e & 6 Testers . . . . . . . . . . . . . . . . . . . TE4.4
Coax Mappers. . . . . . . . . . . . . . . . . . TE1.9 - TE1.10
dB Loss Meters. . . . . . . . . . . . . . . . . . . . . . . TE1.10
Electrical/Voltage Test
RF Test Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . TE1.10
Multimeters. . . . . . . . . . . . . . . . . . . . . TE5.1 - TE5.4
Clamp-on Multimeters. . . . . . . . . . . . TE5.5 - TE5.6
Fiber Optic/FTTx Test
Voltage Detectors. . . . . . . . . . . . . . . . TE5.6 -TE5.7
Ground Loop Testers . . . . . . . . . . . . . . . . . . . TE5.8
OTDRs. . . . . . . . . . . . . . . . . . . . . . . . . TE2.1 - TE2.3
OTDR Accessories . . . . . . . . . . . . . . . . . . . . . TE2.3
Ground Fault Circuit Testers. . . . . . . . . . . . . . TE5.8
Optical Power Meters. . . . . . . . . . . . . TE2.4 - TE2.5
Circuit Breaker Locators. . . . . . . . . . . . . . . . . TE5.8
Optical Laser Sources. . . . . . . . . . . . . TE2.6 - TE2.7
Battery Testers . . . . . . . . . . . . . . . . . . . . . . . . TE5.8
Optical Test Kits . . . . . . . . . . . . . . . . TE2.8 - TE2.10
Microscope and Video Scopes. . . . TE2.11 - TE2.13
Optical Fiber Identifiers. . . . . . . . . . TE2.14 - TE2.15
Fiber Optic Splicers
Visible Fault Locators . . . . . . . . . . . TE2.15 - TE2.16
Splicers. . . . . . . . . . . . . . . . . . . . . . . . TE7.1 - TE7.3
Optical Fault Locators. . . . . . . . . . . . . . . . . . TE2.16
Cleavers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TE7.4
Fiber Optic Cleaning Supplies . . . . . . . . . . . TE2.17
Hot Jacket Strippers. . . . . . . . . . . . . . . . . . . . TE7.5
FTTx/IP Triple-Play Test. . . . . . . . . . . . . . . . . TE2.17
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . TE7.5
WDM/Optical Spectrum Analyzers. . . . . . . . TE2.18
Tool Kits. . . . . . . . . . . . . . . . . . . . . . . . TE7.6 - TE7.7
Dispersion Analyzers . . . . . . . . . . . . . . . . . . TE2.18
Underground Cable Locators
Fibre Channel Testers. . . . . . . . . . . . . . . . . . TE2.18
Cable Locators . . . . . . . . . . . . . . . . . . TE8.1 - TE8.4
VoIP/Telecom Test
Marker Locators. . . . . . . . . . . . . . . . . . . . . . . TE8.5
Inside Wire Testers. . . . . . . . . . . . . . . TE3.1 - TE3.2
Fault Locators. . . . . . . . . . . . . . . . . . . . . . . . . TE8.5
Butt Sets. . . . . . . . . . . . . . . . . . . . . . . TE3.3 - TE3.5
Trace & Talk Sets. . . . . . . . . . . . . . . . . . . . . . . TE3.5
Wire Mappers. . . . . . . . . . . . . . . . . . . TE3.6 - TE3.8
TDR & Fault Finders. . . . . . . . . . . . . . . . . . . . . TE3.8
Tones & Probes. . . . . . . . . . . . . . . . . TE3.9 - TE3.12
Verification Test. . . . . . . . . . . . . . . . . . . . . . . TE3.13
Qualification Test . . . . . . . . . . . . . . . . . . . . . TE3.13
Cable Analyzers. . . . . . . . . . . . . . . . . . . . . . . TE3.13
Loop Testers. . . . . . . . . . . . . . . . . . TE3.13 - TE3.14
VoIP Installer’s Tool Kits. . . . . . . . . . . . . . . . TE3.14
Satellite Test .........................................................TE6.1
questions
Not sure which product to use?
Call your local TVC representative. Our sales staff
and technical product managers will talk you
through your project, recommending the best
product for your application.
Some products presented in this catalog may not be available for world-wide sale. Please contact your local TVC representative for full details.
NOTICE: Technical specifications are direct from manufacturers. Before utilizing any product, customers should determine the suitability of the
product for its intended use.
for more detailed information, visit our web site at
www.tvcinc.com
CATV/RF Test
Additional TVC
Service Offerings
Product Training
TVC Sales and Product Management
personnel are available for product training
at customer or project site locations. In
addition, TVC conducts WebEx/remote
training on many of our products.
System Design and Integration
For headend and field applications, TVC can
work with customers to determine the most
appropriate equipment and connectivity
products needed for various projects. In
addition, TVC can provide on-site system
integration and installation support for many
applications including VoIP, VOD and Digital
Transport.
P/N
2011346010
Model Three™
Description
Signal Level Meter. Range: 5 MHz to 1 GHz; Accuracy: ±50 ppm (20°C ± 5°C)
Trilithic Model Two™
Custom Kitting
P/N
2010967003
TVC works with many customers to package
tools, self-installation kits for cable modems,
VoIP, and HDTV related products for field
technicians or construction crews. Kits
can be made up of any products that TVC
provides.
For Outside Plant and Underbridge
applications, TVC has AutoCad design
capability. Our engineers will work with
customers to create specific mechanical or
topographic oriented designs to facilitate
project, application, product planning and Bill
of Materials.
Freight, Packaging, and
Logistical Support
Our business relies on getting products
to our customers in a timely, efficiently
packaged and cost effective manner. TVC
Freight Services continually evaluates the
best methods and carriers to bring our
product to our customers. In addition,
customers can request packages, boxes,
pallets, and truckloads to be packed, sorted
and shipped to destinations in a precise
manner that meets specific customer needs,
including environmentally friendly solutions.
test equipment catalog
The Model Three™ Signal Level Meter is ideal for CATV installations - featuring a wide range of tests for analog
and digital channel measurements. This rugged instrument can be customized, streamlining tests and making your
installations and troubleshooting more efficient.
With the press of a single key, the meter performs a complete test of all channels in the selected user channel plan
to specified limits. It can also be set to automatically perform Level, Spectrum, Tilt (Favorite), Hum, QAM, and Limit
tests at programmed intervals, unattended.
• 5 MHz to 1 GHz Standard Frequency Coverage
• Full Scan, Single Channel, and Spectrum Modes
• Data Logging
• Digital Signal Measurements: Power, MER, Pre- and Post-FEC, BER (Including Deep Interleave)
Some customers find that their unique
system requirements are not met by “off-theshelf” versions of certain products. TVC has
the ability to customize certain products to
meet the specific needs of its customer.
AutoCad Engineering
Sadelco
Trilithic Model Three™
The Model Two™ signal level meter is designed to provide optimal features at a reduced cost. Amplitude
measurements are fast and efficient. Carrier amplitudes are displayed individually, as a group (up to 12 “favorites”),
Model Two™
or as a full-span display. This meter also features a single-channel spectrum mode which displays the presence of
interfering beats in addition to the carrier amplitudes. The meter lets you take the direct power measurement of QAM
signals, data logging, and also includes a voltmeter function.
• Verifies system performance using a complete range of measurements
• Measures analog and digital carrier levels from 5-870 MHz
• 5 to 870 MHz Spectrum Analyzer range
Retrofitting
™
Signal Level Meters
CATV/RF
Our Test Equipment Vendors
delivering products, knowledge, service and experience
Description
Signal Level Meter. Range: 5 - 870 MHz; Accuracy: ± 50 ppm (20°C ± 5°C)
Trilithic TR-2
The TR-2 is an economical solution ideal for your basic HFC installation needs. This simple to use meter provides fast
and efficient measurements including: signal level measurement, tilt measurement to balance your system, carrierto-noise measurements, a voltmeter function, and features an extended battery life.
Weighing less than one pound, this simple to use, rugged meter has a durable plastic case and is convenient for onehand operation. The TR-2 is ready to use with the standard NCTA channel plan and includes a carrying strap, charger,
user’s manual and a spare F-type connector.
• Simple to Use
• Long Battery Life
• Cost-effective
P/N
2011000000
TR-2
Description
Installer’s Signal Level Meter. Range: -30 to 60dBmV; Accuracy: ± 2dB (20°C ± 5°C)
Sadelco DisplayMax® 5000
The DisplayMax 5000 provides a complete test solution for today’s installation workforce. The 5000 series measures
analog and digital channel power as well as quality measurements such as MER, BER and C/N. Return levels are
measured using a built-in DOCSIS modem, insuring sufficient headroom for reliable modem operation. Finally,
shielding is verified by measuring Leakage and Ingress. All these tests from a single, low cost and easy to use field
instrument. The DisplayMax 5000 is the only meter your installers need.
• Modem Return Level
DisplayMax®
• MER, BER & C/N
5000
• Leakage & Ingress Detection
• Analog, QAM, QPSK & 8VSB
• 1000 MHz. Tuning Range Optional
Sadelco
P/N
Description
DisplayMax 5000 Frequency Range: 5 to 872 MHz; Typical Accuracy: ± 0.5dB
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
for more detailed information, visit our web site at
www.tvcinc.com
TE1.1
CATV/RF Test
CATV/RF Test
Return Path Test
CATV/RF
Sadelco DisplayMax® 800 & 800CLI
Trilithic RSVP2™
The DisplayMax 800CLI is powerful enough to maintain the headend, yet simple enough for routine installation
checks. With a wide range of measurement options, a technician can quickly check an individual channel, favorite
channels, all channels, tilt, leakage, ingress, C/N or HUM.
DisplayMax®
• Full Spectrum Display
800
• Leakage (800CLI) & Ingress Detection
• Data Recording
• Auto-Calibration
The Guardian RSVP²™ Reverse Path Tester ensures return quality where it is most critical – the subscriber installation.
Most return path problems begin in the subscriber’s home. Errors in installation, defective cabling, or incorrectly
installed or loose hardware can all disrupt return path communications or allow ingress to enter the cable system.
• Verifies operation headroom for critical digital services
• Quick, simple, automated testing with Pass/Fail results
• Small, rugged, lightweight and very simple to use
P/N
DisplayMax 800
DisplayMax 800CLI
P/N
2010814010
Description
Without Leakage Detection, Tuning Range: 5 to 872 MHz; Typical Accuracy: ± 0.5dB
With Leakage Detection, Tuning Range: 5 to 872 MHz; Typical Accuracy: ± 0.5dB
Description
Reverse Path Tester; Transmit Level: +20 to +55dBmv;
Return C/(N+I) Ratio: ≥ 35dB for ≥ 0dBmV input to SST
RSVP2
Sadelco
Sadelco RT100
Sencore SLM 1475
RT100 is a portable three-frequency Signal Generator that can be used for a wide variety of testing and
troubleshooting applications. Used in conjunction with a Signal Level Meter, the gain or loss of any system
component can be quickly measured. Multiple carriers allow testing in both the upstream and downstream paths.
• Troubleshoot High Modem Levels
• Verify All System Components
• Qualify Home Wiring
The SLM 1475 All-Format RF Signal Analyzer enables today’s RF professional to test and analyze a
variety of RF signals, including terrestrial (off-air), satellite, and cable signals. The SLM 1475 also provides
decoded video and program streams for all in-the-clear channels. The SLM 1475 can effortlessly identify
interference issues and perform off-air antenna alignment.
• Accurately measures analog and digital signal levels
• Full-color, decoded ATSC video for quick visual quality assurance
• Digital quality measurements including MER, Noise Margin, Pre/Post BER and Average Peak Level
P/N
SLM 1475
Description
All Format RF Signal Analyzer. Digital Modulations Types: QPSK - 8PSK - 8VSB - QAM
Frequency Range: TV: 4 to 1010 MHz (FM band included); Sat: 930-2150 MHz
SLM 1475
Sencore SLM 1473
The SLM 1473 Analog and Digital Signal Analyzer is the ideal portable Signal Level Meter for cable
installers. Customers can be assured of quality installation by using the SLM 1473 to verify signal
strength, HUM, audio and video signal levels. With these capabilities, technicians will decrease
re-checking, reduce repair time, and eliminate callbacks.
• Demodulated QAM signals, ANNEX A-B-C, QAM 64-128-256, downstream DOCSIS
• Interchangeable input connector: “F”, “IEC”, or “BNC” or (“N” optional)
• QAM digital measurements: C/N, BER, MER, SNR
P/N
SLM 1473
Description
Analog and Digital Signal Analyzer. Frequency Band: 5-870 MHz
P/N
RT100
RT100
Description
Return Path Tester. Standard Frequencies: 8 MHz (Return / Upstream); 34 MHz (Return /
Upstream); 60 MHz (Forward / Downstream)
Test Probes
Trilithic I-Stop
SLM 1473
The I-Stop Reverse Test Probe is a test accessory that you can use with most signal level meters to take bidirectional
signal measurements with no risk of power damage. Just connect the probe into a distribution tap’s unused KS port
and a spring-loaded “stinger” connects a 20dB resistive test point circuit to the hardline.
• Taps unused KS ports for bidirectional measurements
• Protects instruments from damage caused by line power
• Tracks reverse ingress to the nearest tap
P/N
2010838001 Sencore SLM 1456CM
I-Stop
Description
Reverse Test Probe
Trilithic TP1-T
The SLM 1456CM provides everything installers and operators are looking for - analog and digital measurements,
including Pre/Post BER, MER, spectral display, DOCSIS 2.0 network testing, and leakage and ingress testing
capabilities - all at an affordable price. The SLM 1456CM is ideal for CATV installation and troubleshooting.
• Use the SLM 1456CM for upstream modem measurements. Ping the head-end and retrieve MAC and IP
information
• Digital measurement capabilities including: Average Power, Pre/Post BER, MER, and Constellation for QAM
P/N
SLM 1456CM
CATV/RF
Sadelco
Signal Level Meters
The TP1-T Test Probe is the ideal troubleshooting and verification tool for sweeping Amplifiers, Line Extenders and
most Fiber Nodes. Simply remove the existing attenuator pad and insert the test probe. This test probe can be used
to check levels at any pad location and will allow measurement of the exact signal coming into the given location,
forward or reverse.
• Ideal Test Probe for Most Motorola, Phillips & Scientific Atlanta Amps, Line Extenders & Fiber Nodes
• Replaceable F-81 Connector
• Durable, Longer Lasting
Description
Signal Level Analyzer with DOCSIS. Frequency Range: 5-1000 MHz; Digital Measurement
for 8 VSB, QAM 16-32-64-256 (Annex A,B,C); DOCSIS 2.0 Compliant Device
P/N
2011108000
TP1-T
Description
Test Probe
SLM 1456CM
test equipment catalog
TE1.2
delivering products, knowledge, service and experience
for more detailed information, visit our web site at
www.tvcinc.com
TE1.3
CATV/RF Test
CATV/RF
Signal Leakage
TDRs
Trilithic Seeker Lite2™
Tempo TV90
The Seeker Lite ™ is a tough, convenient and flexible Leakage Test Tool. It assists in subscriber installs by verifying
that leakage in the house is not great enough to contribute to the cable system’s Cumulative Leakage Index (CLI).
Seeker Lite2 works by measuring ambient RF leakage in and around a subscriber’s premises and can be used to
identify and locate all RF leaks greater than 10 μV/m.
• Numerical Measurement Display
• Sensitive, Stable Measurements
• Directional Antenna that Helps Locate Leaks
The TV90 is designed for ease-of-use. You’ll spend less time operating the TDR and more time repairing
faults. Simply select the cable type to be tested and the TV90 does the rest. Impedance, VoP, gain, pulse
width and vertical position are automatically selected and adjusted as you scan the cable. Just move the
cursor to the fault to pinpoint its location.
• Find location of damage in drops
• Find impedance mismatches
• Locate bad passive devices
2
P/N
2011002103
Seeker Lite2™
Description
Leakage Detector. Frequency Range: 118.50 - 147.25 MHz; Level Range:10 to 2000 μV/m.
P/N
TV90
When several cable systems operate in the same area, it is often difficult to determine which system is the
source of a detected leak. The CT-2/CT-3™ solves this problem by tagging the system video carrier with low
frequency modulation. Used as a system with Trilithic’s leakage receivers, (including the Super Plus™, Seeker
and Seeker Lite2™) the CT-2/CT-3 eliminates all “false alarm” triggers.
• The Solution to False Alarms
• Isolates Leaks in Over-Built Systems
• Compatible with Super Plus, Seeker and Seeker Lite2
Description
CT-2 Headend Channel Tagger. Modulates on to one of the standard video carriers in the
systems midband channel line-up
CT-3 Headend Channel Tagger. Generates a tagged carrier at a customer-specified
frequency. Used when a suitable video channel is not available
CT-2 / CT-3
P/N
MCTAP
Searcher Plus GT
The Super Plus leakage receiver is designed for the new era of digital program services and overbuilt
systems. Its high immunity to “false alarms” from other signal sources (even leaks from other systems) make
the Super Plus the perfect instrument for identifying leaks in noisy or overbuilt areas. Because the Super Plus
only responds to carriers that have been “tagged” by a CT-2 (Channel Tag) or CT-3 (Tagged Carrier Inserter), it
rejects the effects of ignition noise and power line interference.
• Testing installations for excessive leakage
• Walking down the source of leakage
• Near field preventative maintenance measurements
TE1.4
TV220
MCTAP is a PC software system that is used for viewing, analyzing and managing your stored waveform data.
MCTAP is compatible with CableScout TV220 and Telescout 100 and 200 Fault Locators.
• TV220 waveforms that are saved in the field can be uploaded to a computer for data management and analysis
• Waveform data can be exported as BMP, JPEG and TIF file formats for easy communication of data
• Waveform data can be exported as text or spreadsheet compatible files for use in word processors or
spreadsheet programs
Trilithic Super Plus
test equipment catalog
Description
CableScout TDR. Test Signal Output 1/2 sine; Amplitude (into 75 Ohm) 4 V into 75 Ohm
Description
Waveform Analysis Software for TV220. Software System comes complete with CD ROM,
Null-modem Cable and Operations Manual
MCTAP
Trilithic TDR 2040
Description
Searcher Plus GT, Frequency 121.2625
Searcher Plus GT, Frequency 127.2625
Searcher Plus GT, Frequency 133.2625
Searcher Plus GT, Frequency 139.2500
Description
Super Plus, Frequency 121.2625
Super Plus, Frequency 127.2625
Super Plus, Frequency 133.2625
Super Plus, Frequency 139.2500
P/N
TV220 Tempo MCTAP Waveform Analysis Software for TV220
Searcher Plus GT is the first Leakage Measurement Receiver built specifically for systems employing digital
set top terminals that cannot tolerate “tagged” leakage carriers. The GT provides enhanced “false alarm”
resistance and many of the features of the Super Plus without the use of a tagged leakage test signal.
• Testing installations for excessive leakage
• Walking down the source of leakage
• Near field preventative maintenance measurements
P/N
2011235121
2011235127
2011235133
2011235139
Description
CableScout TDR. Test Signal Output 1/2 sine.; Amplitude (into 75 Ohm) 6 ns pulse: 5 V
-12 ns pulse: 6 V.
The TV220 delivers high performance, yet is so easy to use that little or no training is required. This leading
edge TDR can test more system bandwidth and expose faults that have been previously invisible to TDR’s yet
still an impairment to digital signals. The TV220 also introduces one-button testing.
• TDR for digital broadband coax
• Finds faults other cable testers can’t
• One button testing
• Serial printer output for stored or displayed waveforms
Trilithic Searcher Plus GT
P/N
2011233121
2011233127
2011233133
2011233139
TV90
Tempo CableScout® TV220 TDR
Trilithic CT-2 / CT-3
P/N
2010670001
2010762000
CATV/RF
CATV/RF Test
The TDR 2040 provides installation technicians and anyone involved in the installation or maintenance of metallic
cables with the capability to quickly find faults in cables from a distance of 0 to 2500 feet. Cables can be damaged
during or after installation. Typically the damaged section is hidden from view behind walls, above ceilings, or buried
below ground. Using time domain reflectometry technology, the TDR 2040 quickly identifies an open or short and
provides the distance to the problem location.
• Measure Voltage up to 250V
TDR 2040
• Trace Hidden Cable Runs
• Compatible With All Common Cables
P/N
2011043003
Description
TDR 2040 Cable Fault Locator
Triplett TDR Cable Fault Finder
Super Plus
This TDR is a hand-held Digital Cable Length Meter/TDR Fault Locator designed to both measure the length of copper
communications cables and distance to a fault.
• Find Cable Length or Distance to Fault from one end
• Low Cost Digital Cable Length Meter/TDR
• Built-in Tone Generator for Cable Tracing & Identification
• Simple Operation with Automatic Distance Display
P/N
3271
delivering products, knowledge, service and experience
3271
Description
TDR Cable Fault Finder
for more detailed information, visit our web site at
www.tvcinc.com
TE1.5
CATV/RF Test
CATV/RF Test
Spectrum Analyzers
Video/MPEG Test
DigiGen is a family of 1U rack-mountable multiformat video and audio signal generators. Members of the
family include:
• DigiGen MultiGen........... HD and SD SDI and Composite Video and Audio Signal Generator
• DigiGen Axiom................ HD SDI Video Signal Generator
• DigiGen Index................. SD SDI, Composite Video and Audio Signal Generator
The PSA1505 is a cost effective, high performance, portable Spectrum Analyzer. Advanced digital signal processing
is utilized to provide bench top performance in a portable unit. The PSA1505 can be used for demanding applications
like measuring spectral purity, and measuring specifications such as transmit power, frequency bandwidth, harmonic/
spurious response, satellite L-Band, adjacent channel power, and antenna directivity.
P/N
PSA 1505
CATV/RF
CATV/RF
Sencore Hamlet® DigiGen Composite Video and Audio Signal Generator
PSA 1505
Sencore PSA 1505
Description
Portable Spectrum Analyzer. Frequency Range: 9 KHz ~ 3 GHz; Reference Frequency: 110 MHz
The DigiGen MultiGen is a feature rich, simple to use, multi-format Video Generator for use in control rooms
and facilities where racking is available. The unit includes HD SDI, SD SDI and composite video generation
with embedded audio and either AES/EBU or analog audio outputs. 16 video test signals are available for each
of the outputs in digital this can be 525 or 625 and in analog either NTSC or PAL, including pathological, overlayed circles, moving pattern path activity signal, CRC codes, audio group selection audio line up tones, with
or without an ident and a 16 character alpha/numeric ident which is scrollable.
DigiGen
P/N
Description
DigiGen
HD and SD SDI and Composite Video and Audio Signal Generator
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Video/MPEG Test
Sencore Hamlet® MicroFlex
The Hamlet® MicroFlex a multi-format, multi-standard hand-held waveform, vector, audio, picture Monitor and Test
Signal Generator. Using a built-in 3.5” diagonal, high-quality VGA (640 x 480) TFT display, the MicroFlex shows the
picture in 4:3 or 16:9 formats.
• Hand-held HD/SD SDI/Composite capable measuring and monitoring instrument
• Data and gamut analysis, time code logging of assigned errors
P/N
Description
MicroFlex
Test Signal Generator
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Tektronix MTM400A Transport Stream Monitor
The MTM400A provides a complete solution for real-time transmission monitoring of MPEG transport
streams over RF, IP, and ASI interfaces. Powerful confidence monitoring capability and deep diagnostic
measurements are both combined into a single integrated solution.
• FlexVuPlus™ user interface
• Hierarchical views of network, media and data information for diagnostics
• Unique dual-level alarming and seven day trending information
• Single scalable solution for real-time transmission monitoring of MPEG transport streams
MicroFlex
Sencore Hamlet® DigiScope DS9000
P/N
Description
MTM400A
Transport Stream Monitor
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
The DigiScope DS9000 is designed for the measurement and monitoring of all HD, SD and Composite signals.
Embedded AES/EBU audio and external reference are included. The DigiScope DS9000 is 1U rack-mountable,
low power device with DVI and XVGA outputs for use on external displays.
• Modular HD/SD SDI/Composite 1U rack measuring instrument
• Data and gamut analysis, time code logging of assigned errors
DS9000
P/N
Description
DS9000
Hamlet® DigiScope
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Tektronix MTS400P Portable MPEG Test System
The MonitorScope MS9000 is designed for the measurement and monitoring of all HD, SD and Composite
signals. The product includes an embedded AES audio external reference. The MonitorScope MS9000 is
compact, low power On-Screen Display (OSD) device with a built in XVGA display.
• The first modular 3U half rack HD, SD, Composite measuring instrument
• High resolution quality 6.5” XVGA TFT display
P/N
Description
MS9000
Hamlet® MonitorScope
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
P/N
Description
MTS400P
Portable MPEG Test System
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
MS9000
Tektronix MTS415P Portable MPEG Test System
Sencore Hamlet Adept™ A700WVA
®
The Hamlet Adept is a multiformat capable Video Monitoring Instrument with On Screen Display (OSD) which also
has a built in generator. The Adept provides SD SDI; analog component; YC (S-video); and composite 625 and 525
multi-standard measurement and monitoring capability, including line select, bow tie and gamut indication.
• Multi-format inputs : Composite, Component & SD SDI
A700WVA
The MTS415 is an MPEG Analyzer with a wide range of interfaces and analysis capabilities that provide the
necessary connectivity to diagnose problems anywhere in the cable network, whether that be transmission
links (RF or IP layer) or content processing (TS or ES layer).
• Cross layer error correlation and diagnostic capability
• High performance line rate Gigabit Ethernet (GbE) IP connectivity and integrated cross layer analysis
• CaptureVu™ technology
• Integrated cross layer fault analysis and logging
P/N
Description
MTS415P
Portable MPEG Test System
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
P/N
Description
A700WVA
Multiformat Capable Video Monitoring Instrument
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
test equipment catalog
MTS400P
The MTS400P is an MPEG/IP Analyzer that enables field based engineers with a cost-effective analyzer for
installing, commissioning and maintaining H.264, IPTV and IP video based services that combines both IP
network and MPEG measurements.
• Cross layer error correlation and diagnostic capability
• High performance line rate Gigabit Ethernet (GbE) IP connectivity and integrated cross layer analysis
• Wide range of DTV standards are supported
• Integrated cross layer fault analysis and logging
Sencore Hamlet® MonitorScope MS9000
TE1.6
MTM400A
delivering products, knowledge, service and experience
for more detailed information, visit our web site at
MTS415P
www.tvcinc.com
TE1.7
CATV/RF Test
CATV/RF Test
CATV/RF
JDSU Resi-Tracer™ Probe
Resi-Tracer™ is a multi-function Signal Detector that locates standard generated tone signals as well as dial tone and
speaker popping signals. Resi-Trace™ also features unique tone tracing capabilities for coax cable systems, both live
and dark, and can be used for a number of special field applications.
• Traces network/Ethernet, telephone, coax, and audio cables
• Audible and visual tone location indicators
• Speaker phasing with built-in microphone pickup
• Traces unpowered or active coax cable with coil mode
P/N
TT300
JDSU Coax Mapper
TT300
The Coax Mapper is a handheld Tester for CATV, security system, and other coax system installers and technicians
who need to map coax installations. Used in conjunction with the included remote terminators, the Coax Mapper
displays PASS, OPEN, or SHORT with just one test button on the main unit. One button also initiates a tone signal.
• Tests coax cable with F-connectors or BNC connectors
• Detects and displays OPEN or SHORT conditions
• Displays PASS when no failures are indicated for each remote
P/N
CX200
Description
Resi-Tracer Probe
CATV/RF
Coax Mappers
Tones & Probes
CX200
Description
Coax Mapper Cable Tester. Includes set of four (1–4) coax cable test remotes, four F-connector
jack to BNC jack adapters, F-connector plug to BNC jack adapter, and 6-volt battery
JDSU Testifier™ Cable Tester
JDSU Tone Tracer
The Tone Tracer is an ergonomic, high-sensitivity Probe for field service professionals. Used in conjunction with
any analog tone generator, the Tone Tracer identifies wire and cable without having to make direct metallic contact
with the conductor. The Tone Tracer can be used with a wearable headset or a standard cell phone headset.
• Ergonomic shape, balanced weight
• Volume control
• Recessed “on” switch
• Tip replacement without opening case
• Battery-low indicator
P/N
TT100
TT100
P/N
TP350
KP321
Description
Tone Tracer Probe. Includes round probe tip, paddle-style probe tip, and 9-volt battery
JDSU Trace-Rite™ Tone Generator and Tone Tracer
The Testifier™ cable tester provides full cable test and tone generation in one unit for telecom, datacom, and cable
installers and technicians. The easy-to-use Testifier features one-button operation to initiate telco, network, and coax
modes for diagnostic tests and results. The main unit includes built-in RJ11 and RJ45 jacks for testing 6-wire and
8-wire twisted pair and F-connector for testing coax.
• Displays tests for shorts, opens, miswires, reversals, and split pairs in wiremap format
• LCD with icon flags
• Integrated jacks for telco and network connections, F-connector for coax
TT250
Description
Testifier Cable Tester with onboard cable test remote. Includes 30.48 cm (1 ft) RJ45 to alligator
clips cable, 19 cm (7.5 in) RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45
jacks, nylon case, and 9-volt battery
Testifier Cable Tester with onboard cable test remote, 30.48 cm (1 ft) RJ45 to alligator
clips cable, 19 cm (7.5 in) RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45 jacks, set
of 20 RJ45 ID-only remotes, and case
JDSU TestifierPRO™ Cable Tester
The Trace-Rite™ is an ergonomic, powerful, and accurate Tracer with highly sensitive signal reading capabilities for
locating telco, network, and coax cable. With a built-in tone generator, two different tones, and auto-off feature, the
Trace-Rite is a reliable, easy-to-use tool that allows installers to easily find wires behind walls, floors, and ceilings.
• Built-in tone generator with two different tones, LED indicator, and auto-off feature
• Audible tone location indication
• Adjustable volume control
• Self-powered amplified probe with on/off button prevents battery drain
The TestifierPRO™ Cable Tester provides telecom, datacom, and cable installers and technicians with cable test,
length measurement, and hub blink functions in one unit. The easy-to-use TestifierPRO Cable Tester requires onebutton operation to initiate telco, network, and coax modes for diagnostic tests and results. The main unit includes
built-in RJ11 and RJ45 jacks for testing six-wire and eight-wire twisted pair and F-connector for testing coax.
• Identifies cable termination on active ports by blinking port LED
• Measures cable length using patented cable capacitance method
• Displays single-ended test results in wiremap format for opens, shorts, and split pairs
P/N
TT250
P/N
TP650
TP655
Description
Trace-Rite Tone Generator and Probe. Includes RJ11 to alligator clips cord set and four 6-volt
button cell batteries
TG455
JDSU Tonax™ Coax Tone Generator
The field-proven Tonax™ Coax Tone Generator is optimized to tone on coaxial cable for phone and data cabling
systems. The compact and rugged Tonax includes a high-power tone generator mode that enables tracing through
ungrounded splitters or to equipment as well as tracing terminated or shorted coax cable. Probe mode is used for
conventional tone tracing. The low-power tone generator mode supplies tone voltage and current comparable to
common tone generators. The POTS simulator mode supports line voltage, line current, and dial tone functions with
a talk battery performance that performs better than common tone generators.
• Tone and trace coax cable through splitters, wire shorts, and terminated cable to active components
• Built-in F-connector for coax cable
• Three tone outputs
P/N
TG455
KP323
Description
Tonax coax tone generator with alligator clips
Tonax coax tone generator with alligator clips & Resi-Tracer probe in a pouch
test equipment catalog
TE1.8
delivering products, knowledge, service and experience
TP350
TP650
Description
TestifierPRO Cable Tester with cable test remote. Includes 30.48 cm (1 ft) RJ45 to alligator clips
cable, two 30.4 8cm (1 ft) patch cables with RJ45 connectors, #1 coax cable test
remote, and pouch. Requires 9-volt battery (not included)
TestifierPRO Cable Tester with 8 cable test remotes. Includes 30.48 cm (1 ft) RJ45 to alligator
clips cable, two 30.48 cm (1 ft) patch cables with RJ45 connectors, 30.48 cm (1 ft)
coax cable, #1 thru #8 coax cable test remotes, and pouch. Requires 9-volt battery (not included)
Triplett WireMaster Coax - LAN Cable Test Sets
The WireMaster Coax is an 8-way Cable Mapper, with built-in continuity beeper, and 120VAC line cross
protection. BNC connectors on the main unit and the remotes allow the user to attach to BNC cables or
outlets, and due to the variety of off-the-shelf BNC adapters, to numerous other connector families.
• 8 Remotes with BNC Connectors included
• Tests for Opens and Shorts
• AC/DC Overvoltage Warning LED
• 120VAC Line Cross Protection
• Real-time test helps identify intermittents
P/N
3274
3274
Description
WireMaster Coax LAN Cable Test Sets
for more detailed information, visit our web site at
www.tvcinc.com
TE1.9
fiber optic/fttx Test
CATV/RF
Coax Mappers
OTDRs
Triplett WireMaster Mapper
Noyes M700 Compact Single-mode OTDR
•
•
•
•
•
•
•
•
The M700 is a compact, full featured, single-mode OTDR that includes an integrated Visual Fault Locator (VFL),
an Optical Power Meter (OPM) displaying up to three wavelengths simultaneously, and a large transflective
touch screen display suitable for both indoor and outdoor operation.
The M700 OTDR supports Real Time, Full-Auto, and Expert (manual) modes, precision event analysis, dualwavelength testing, rich file naming, and intuitive job set-up functionality. In addition to OTDR event analysis,
Pass/Fail acceptance values can be set to alert the test operator of failing or marginal events. Using one of the
Least Squares Approximation (LSA) loss methods, events may be added or deleted manually.
• 38 / 36 dB dynamic range @ 1310 / 1550 nm
• Integrated OPM and VFL (650 nm)
Includes 39 Remotes (BNC, F, RJ11/RJ45, and Alligator)
Generates Warble signal for Wire Tracing (with optional Hound Tracer)
Tests for Opens and Shorts
AC/DC Overvoltage Warning LED and Beeper
120VAC Line Cross Protection and Warning
Real-time test helps identify intermittents
Power Latch Function Switch to prevent accidental turn-ons
Maps lengths over 20,000 ft (RG- 6/U, 7.4 Ohms per 1000ft)
P/N
3281
3281
Description
WireMaster Mapper. 8-Way Wire & Cable Mapping Kit
FIBER OPTIC/FTTx
CATV/RF Test
M700
P/N
Description
M700-11-0901PR Single-mode OTDR. 1310/1550 nm; Test Port Adapters: SC, FC, and LC
Noyes M650 Compact QUAD OTDR
dB Loss Meters
The M650 is a compact, full-featured, QUAD OTDR with an integrated Visual Fault Locator (VFL, 650 nm),
Optical Power Meter (OPM), and a large transflective touch screen display suitable for both indoor and outdoor
operation. With short dead zone and intermediate range specifications, the M650 is ideal for Tier 2 testing of
premises (building and campus) networks.
The M650 OTDR supports Full Auto, Expert (manual), and Real-Time test modes, precision event analysis, dualwavelength testing, rich file naming, and an intuitive job setup functionality. In addition to OTDR event analysis,
Pass/Fail acceptance values can be set to alert the test operator of failing or marginal events. Using one of the
Least Squares Approximation (LSA) loss methods, events may be added or deleted manually.
• 22dB (MM), 26dB (SM) dynamic range
• Integrated OPM and VFL (650 nm)
3279
Triplett CableRater
•
•
•
•
•
•
Measures dB Loss and Gain in Cable Distribution Systems
Verify Installation before Cable TV Service is Connected
Transmitter Simulates Frequency and Level of TV Channel 3
Real Time measurement allows for checking for intermittents
Efficient Transmitter permits hours of testing without replacing battery, plus built in battery test
Receiver contains a blue backlit display which allows for testing in poorly lit areas
P/N
3279
M650
P/N
Description
M650 M650 Compact QUAD OTDR
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Description
CableRater dB Loss Meter
Noyes OFL 200 Single-mode OTDR
The OFL 200 OTDR sets new standards for size, weight, ease-of-use, and value in a telco/broadband OTDR. Smaller
than many optical loss test sets, the OFL 200 has the range, features, and price to make it the perfect OTDR for
outside plant crews installing and maintaining optical fiber cables in broadband, metro, access, and FTTx networks.
Unlike ‘optical fault locators’, which detect only reflective events, the OFL 200 is a true OTDR, which detects fiber
backscatter as well as Fresnel reflections. Thus, the OFL 200 can locate reflective and non-reflective breaks, including
those caused by crushed fibers. In addition, the OFL 200 provides an integrated 650 nm visual fault locator (VFL) for
short distance troubleshooting and fiber tracing.
• 1550 or 1625 nm single-mode OTDR
• Locates reflective and non-reflective breaks
RF Test Kit
P/N
Description
OFL 200-1550
Single-mode OTDR. 1550 nm
OFL 200-1625
Single-mode OTDR. 1625 nm
Both models include SC, FC adapter caps (ST, LC available), universal AC power adapter, country-specific line cord, user’s guide, and carry case.
Trilithic House Detective Installation Kit
The House Detective is a selection of instruments specifically designed to provide you with everything
you need for basic installation, validation and service of modern cable television services. This group of
instruments was selected based on years of experience supplying test equipment into the cable industry
accompanied with a clear understanding of the tasks needed to certify a modern drop.
• Signal Level Meter
• Leakage Detector
• Cable Fault Locator
• One Easy-to-use Affordable Package
P/N
2011042000
2011042011 Noyes OFL 250 Handheld OTDR
Description
House Detective (includes a TR-2, Seeker Lite² and a TDR-2040)
House Detective II (includes a Model Two, Seeker Lite² and a TDR-2040)
House Detective
The OFL 250 is a single-mode OTDR with an integrated Optical Power Meter (OPM), Laser Source (OLS), and Visual
Fault Locator (VFL) in a handheld package weighing only 0.8 kg (1.7 lb). With short dead zone and mid-range dynamic
range performance, the OFL 250 is ideal for testing optical fibers in service provider metro areas and FTTx networks.
The OFL 250 provides automatic and manual setup, precision event analysis, multiple-wavelength testing, a 12-hour
battery life, internal data storage, and USB connectivity. OTDR and OPM test ports are equipped with tool-free
adapters, which can be changed in seconds.
• Multiple-wavelength single-mode OTDR
• 1.5 m (typical) event dead zone
P/N
OFL2-26-0910PR
OFL2-26-0924PR
test equipment catalog
TE1.10
OFL 200
delivering products, knowledge, service and experience
OFL 250
Description
Single-mode OTDR 1310/1550 nm
Single-mode OTDR 1310/1550/1625 nm
for more detailed information, visit our web site at
www.tvcinc.com
TE2.1
fiber optic/fttx Test
FIBER OPTIC/FTTx
OTDRs
OTDRs
EXFO AXS-100 Access OTDR
EXFO FTB-7200D LAN/WAN OTDR
Powerful handheld units combining OTDR and Power Meter functionalities, optimized for FTTx PON certification and
AXS-100
troubleshooting, as well as for premise network testing.
• Specifically designed for in-service PON troubleshooting
• Event dead zone as low as 0.8 m, for easy location and characterization of all events
• Multiple options, including Power Meter, Visual Fault Locator (VFL), Fiber Inspection Probe, Printer and IP testing
• Fault Finder mode, for quick identification/location of fiber breaks
• Smart software option providing Pass/Fail status at all wavelengths, as well as span loss, ORL, fiber length and
macrobend locations in a single window
Combines single-mode and multimode fiber test functionalities aimed at premise/private/enterprise network
testing. Offers short dead zones, an easy-to-use software interface and controlled launch conditions for
accurate measurements.
• Dynamic range of up to 36dB
• Four wavelengths (12CD-23B model) combined with an optional visual fault locator
• 850, 1300, 1310 and 1550 nm wavelengths with respective dynamic ranges of 27, 26, 36 and 34dB
• Controlled launch conditions, for more accurate loss measurements
P/N
FTB-7200D-12CD FTB-7200D-12CD-23B
P/N
Description
AXS-100 Access OTDR. Designed for single-mode OTDR troubleshooting; 1310/1550/1625 nm, 29/28/28dB
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
•
•
•
•
•
Powerful handheld units combining OTDR and Power Meter functionalities, optimized for FTTx PON certification and
troubleshooting, as well as for premise network testing.
• A high-performance OTDR solution for single-mode and/or multimode installations
AXS-110
• A convenient and cost-effective solution for all LAN/WAN and short-haul fiber networks
• Pass/Fail features that comply with industry standards such as TIA 568c and IEEE 802.3ah
Description
Single-mode OTDR. Ideal for FTTx/access and CATV testing; 1310/1550 nm, 32/30dB
Multimode OTDR. Optimized for enterprise/premises/private network testing on both 50 and
62.5 μm multimode fiber; 850/1300 nm, 24/25dB
All-Fiber OTDR. Combines single-mode and multimode capabilities for enterprise/campus/access
networks; 850/1300/1310/1550 nm, 24/25/32/30dB
Small, lightweight OTDR-dedicated platform factory-configured to house any EXFO OTDR configuration. Takes
EXFO’s OTDR technology to the next level of user-friendliness.
• Small, lightweight OTDR-dedicated platform
• Tests up to four wavelengths
• The industry’s fastest acquisition times
• Shortest dead zones available
Compact hand held design
Measures length and defect of coiled fiber
Up to 35 dB dynamic range
Large LCD display, backlit
Fiber analysis software for data management and report generation
P/N
920XC-20C-UPC-NAFC Description
Single-mode OTDR.1310/1550 nm (± 20 nm); 35/35dB
920XC
Corning OV-1000 OTDR
The OV-1000 provides testing flexibility by combining a rugged platform with field-interchangeable multimode,
single-mode and advanced testing modules. Designed for testing and troubleshooting of LAN, Telco, CATV and FTTx
networks, all OTDR modules can be used as continuous wave (CW) light sources. A Power Meter and Visual Fault
Locator (VFL) are available as options on the mainframe and the OV-1000 utilizes Windows® CE technology which
allows for a fast power-up time of four seconds from sleep mode.
EXFO FTB-150 Compact OTDR
P/N
FTB-150-ACCESS
FTB-150-LH
FTB-150-FTTx
FTB-150-METRO
FTB-150-QUAD FTB-150-MM Description
Multimode OTDR. 850 ± 20/1300 ± 20 nm; 27/26dB
Single-mode & Multimode OTDR. 1310 ± 20/1550 ± 20nm; 36/34dB
Greenlee Handheld Single-mode OTDR
EXFO AXS-110 All-Fiber OTDR
P/N
AXS-110-SM
AXS-110-MM AXS-110 FTB-7200D
FIBER OPTIC/FTTx
fiber optic/fttx Test
FTB-150
Description
Single-mode OTDR. 1310/1550 nm, 37/35dB
Single-mode OTDR. 1310/1550 nm, 45/43dB
Multimode OTDR. 1310/1490/1550/1625 nm, 39/35/38/36dB
Single-mode OTDR. 1310/1550/1625 nm, 42/41/41dB
Single-mode & Multimode OTDR. 850/1300/1310/1550 nm, 27/26/36/34dB
Multimode OTDR. 850/1300 nm, 27/26dB
P/N
1000BK-SD37 1000DK-SD37
OV-1000
Description
Basic Kits include OV-1000 Mainframe, power supply, battery, appropriate OTDR port adapters, CD
with OTSView PC emulation software and manual, cleaning supplies and hard-shell transit case
Deluxe Kits include OV-1000 Mainframe with power meter and VFL, power supply, battery,
appropriate OTDR port adapters, CD with OTSView PC emulation software and manual, OTS
Batch PC batch processing software, cleaning supplies and hardshell transit case
OTDR Accessories
Noyes OTDR Fiber Rings
Fiber Rings of 150m of fiber are ideal for premises fiber network test applications. Fiber Rings of 500m and 1km of
single-mode fiber are designed for broadband, long-haul fiber network test applications.
EXFO FTB-200 Compact Platform OTDR
The smaller, lighter platform built for the supertech. Combines single-mode and multimode fiber test
functionalities, ideal for FTTx, metro/access and long-haul network testing. Accommodates two fieldinterchangeable modules ranging from OTDRs and loss testers to CWDM/OTDR’s and Ethernet analyzers.
• New software functionalities for simpler, faster OTDR testing
• Designed for the field: lightweight and compact; resistant to shock, water, dust and common chemicals;
door panels for extra port protection
• Battery-powered solution for OTDR, Ethernet and loss testing
FTB-200
P/N
Description
FTB-200 Modular compact platform OTDR. 850/1300/1310/1490/1550/1625/1650 nm
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
FR1
P/N
Description
FR1-SM-150- y1- y2 Standard, One Fiber - Single-mode; 150 m (492 ft) where y1 & y2 are user selected
connector types
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Corning OTDR Launch Fiber, Access Jumper
Corning Cable Systems offers two OTDR launch cable solutions. Used for connecting between the OTDR and
system-under-test, these solutions can also be used on the far end of the system-under-test as a receive fiber. Both
options come with a wide variety of configurations depending on customer application. The first solution is a small,
portable test bag (PTB) that offers a low cost, compact launch cable and can be placed inside most OTDR transit
cases. The PTB also offers a carabineer for attaching to an equipment rack, belt loop, bucket lift or messenger. The
second option is a portable test fiber case (PTF), which offers a ruggedized, easy-to-configure solution. The rugged
construction allows for shipment of the launch cable separate from the OTDR case.
P/N
Part numbers vary to customers needs. Please check with your TVC representative or www.tvcinc.com for details.
test equipment catalog
TE2.2
delivering products, knowledge, service and experience
for more detailed information, visit our web site at
www.tvcinc.com
TE2.3
fiber optic/fttx Test
FIBER OPTIC/FTTx
Optical Power Meters
Optical Power Meters
Noyes OPM1 Optical Power Meter
Wilcom FTTx Power Meters
The OPM1 Optical Power Meter may be used to measure optical power (dBm) in Premises, Telco, or Broadband fiber
optic networks. When used with an LED or Laser light source, the OPM1 can also measure the attenuation (insertion
loss) of multimode or single-mode cables.
• 850, 1300, 1310, 1550 nm
• Premises (Ge) and broadband (InGaAs) models
• Displays optical power (dBm)
The FM Series Fiber Meters are hand-held, compact, lightweight, and easy-to-use battery powered optical
power meters.
The optical input port on the FM power meters accept any Wilcom thread-on style adapter caps. Adapter
caps are required for operation and must be ordered separately.
P/N
OPM 1-2C OPM 1-3C
OPM1
P/N
FM8515B
FM8515C
Description
Calibrated at 850, 1300, 1310, and 1550 nm for testing LAN, Ethernet, FDDI, Token Ring, and
single-mode fiber systems such as Telco, WAN, and CATV
Operates at 850, 1300, 1310, and 1550 nm but offers greater temperature stability needed for
outside plant 1550 nm testing as with WAN, CATV, and Telco systems
Description
Optical Power Meter - FTTx. Application: Wavelengths 850, 1310, 1550;
Power Range is +5dBm to -70dBm
Optical Power Meter – FTTx. Application: Wavelengths 850, 1310, 1550;
Power range is +23dBm to -50dBm
EXFO FPM-300 Network Testing - Optical
Noyes OPM4 Optical Power Meter
The FPM-300 automatically uses the proper calibration parameters when combined with the FLS-300 or FOT-300
source units.
• Highly accurate unit offering 10 calibrated wavelengths and reference values
• No offset nulling required, reducing measurement time
• Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership
The OPM4 is designed for measuring optical power in Premises, Telco, or Broadband networks and for performing
insertion loss measurements on multimode or single-mode fiber optic links.
• Multimode or single-mode applications
• Wave ID (auto identification & switching)
OPM4
• Multiple-wavelength testing
FPM-300
P/N
Description
OPM4 Optical Power Meter, 2 x AA batteries, protective rubber boot, user’s guide, and carry case
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
P/N
Description
FPM-302
Power Meter - Ge detector. Power Range: +10 to -60dBm
FPM-302X
Power Meter - High-power Ge detector. Power Range: +26 to -50dBm
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Noyes OPM5 Optical Power Meter
EXFO FPM-600 Network Testing - Optical
The OPM5 is a full-featured OPM is designed for measuring optical power in Premises, Telco, or Broadband networks
and for performing insertion loss measurements on multimode or single-mode fiber optic links.
• Multimode or single-mode applications
• Wave ID (auto identification & switching)
• 270Hz, 330Hz, 1kHz, 2kHz Tone detection
The FPM-600 offers a memory capacity of 1000 data items and converter software, for easy data management and
USB transfer to a PC. Comes with more than 40 calibrated wavelengths.
• Adapts to all network types: LAN, CWDM, DWDM, etc.
• Error-free, time-saving features: automatic wavelength recognition, and no offset nulling required
FPM-600
• High accuracy, wide dynamic range and high power measurement capability (up to 26 dBm)
• User-configurable Pass/Fail thresholds with LED indicator
OPM5
P/N
Description
OPM5 Optical Power Meter, 2 x AA batteries, AC, protective rubber boot, USB cable, Windows®
compatible software and user’s guide, OPM5 user’s guide, and carry case
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
P/N
Description
FPM-602
Power Meter - Ge detector. Power Range: +10 to -70dBm
FPM-602X
Power Meter - High-power Ge detector. Power Range: +26 to -55dBm
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Noyes Adapter Caps, Tips, & Test Port Adapters
EXFO PPM-350C - PON Power Meter
These standard thread-on adapter caps are used to mate non-angled and angled single-fiber and dual-fiber
connectors to optical power meter ports on our OPM, T400, T500B, and ORL 3B series test sets or OFS 300-200C
and VS 300 microscopes.
The PPM-350C is optimized for FTTx service activation and maintenance, this highly versatile handheld unit is available in
one-port and two-port pass-through configurations.
• Full OLT-to-ONT communication while testing
• Simultaneous measurement and display of voice, data and video signals on BPON, EPON and GPON architectures
• Ten user-definable threshold sets, as well as pass/fail analysis features
• Filtered measurements, providing distinct power values for each signal (1310 nm, 1490 nm and 1550 nm)
P/N
8800-00-0200
8800-00-0209 8800-00-0214
8800-00-0224
Description
FC Adapter Cap
SC Adapter Cap
2.5mm Universal
1.25mm Universal
CSM1
The CSM1 is a palm-sized, cost-effective unit is designed for measuring optical power in Premises, Telco, or Broadband
fiber optic networks and for performing insertion loss measurements on multimode or single-mode fiber optic links.
Weighing only 0.4 lb, this power meter is ideal for field use.
• Multimode or single-mode applications
• 270, 330, 1000, 2000 Hz Tone Detection
• Power measurements in dBm or μW; insertion loss in dB
P/N
Description
CSM1 Optical Power Meter, 2.5 mm Universal adapter cap, 2 x AA batteries, user’s guide, and carry case
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
test equipment catalog
PPM-350C
P/N
Description
PPM-352C
PON power meter, two ports, BPON, extended range EPON, GPON
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Noyes CSM1-3 Contractor Series Optical Power Meter
TE2.4
FM8515
FIBER OPTIC/FTTx
fiber optic/fttx Test
delivering products, knowledge, service and experience
Greenlee 560XL Fiber Optic Power Meter
•
•
•
•
•
Easy to use - three buttons control all functions. Loss measurements in (dB) power measurements in (dBm).
0.01dB measurement resolution
Multi-wavelength storage - stores and recalls reference power levels for faster, more efficient measurements
Snap on connector interface adapts to FC, SC and ST connectors
Long battery life - approx. 100 hours continuous operation
User selectable auto shut-off
P/N
560XL 560XL
Description
Fiber Optic Power Meter. 850/1300/1310/1550 nm; +3dBm to -60dBm resolution
for more detailed information, visit our web site at
www.tvcinc.com
TE2.5
fiber optic/fttx Test
FIBER OPTIC/FTTx
Optical Laser Sources
Optical Laser Sources
Noyes OLS2 - Dual Laser Light Source with Wave ID
EXFO FLS-300 - Light Source
The OLS2-Dual is a handheld, rugged Laser Source designed for performing insertion loss measurements
on single-mode fiber optic links when used with an Optical Power Meter. When paired with an Optical Fiber
Identifier, the OLS2-Dual may be used for fiber identification.
The OLS2-Dual features 1310 nm and 1550 nm Laser output from a single output port and offers several modes
of operation. Each wavelength may be transmitted individually at CW or with user selectable modulated tone.
Also, each wavelength may be transmitted with Wave ID. When transmitting with Wave ID, the OLS2-Dual
supports transmitting pairs of wavelengths in an alternating pattern.
• Dual wavelengths from a single port
• Dual or single Wave ID, CW, Tone
• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
A versatile, complete light source available with up to three single-mode wavelengths on a single port, or four
wavelengths (two multimode and two single-mode) on two ports.
• Multifunctional light source: up to three single-mode wavelengths on a single port, or four wavelengths (two
multimode, and two single-mode) on two ports
• Three-year warranty and recommended calibration interval
• Can transmit with a wavelength-identification digital encrypted protocol so that any compatible unit can
automatically use the proper calibration parameters
P/N
OLS2-Dual OLS2
FIBER OPTIC/FTTx
fiber optic/fttx Test
FLS-300
P/N
Description
FLS-300
Light Source
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Description
Optical Light Source, protective rubber boot, 2 x AA batteries, user’s guide, and carry case
EXFO FLS-600 - Light Source
Offers Laser, LED and VCSEL models, as well as various wavelength options. Helps you save time by building a list of
your “favorite” wavelengths, providing for a faster sweep when testing.
• Up to three single-mode wavelengths (1310, 1550, and 1490 or 1625 nm) on a single port, or four wavelengths
(850/1300 nm and 1310/1550 nm) on two ports
FLS-600
• Error-free, time-saving test features
• Controlled multimode launching output
Noyes OLS4 - Integrated LED and Laser Light Source with Wave ID
The OLS4 is a handheld, rugged, integrated two-port LED and Laser Light Source designed for performing
insertion loss measurements on multimode or single-mode fiber optic links when used with an Optical Power
Meter. When paired with an Optical Fiber Identifier, the OLS4 may be used for fiber identification.
The OLS4 features 850/1300 nm LED output from a multimode output port and 1310/1550 nm Laser output
from a single-mode output port. Each wavelength may be transmitted individually at CW or with user selectable
modulated Tone (SM output). Also, each wavelength may be transmitted with Wave ID.
• Integrated LED and Laser Light Source
• Dual wavelengths from a single port
• Dual or single Wave ID, CW, Tone (SM output)
P/N
OLS4
OLS4
Description
Optical Light Source, protective rubber boot, 2 x AA batteries, mandrels, user’s guide,
and carry case
Greenlee 580XL Laser Source
•
•
•
•
•
•
•
Noyes OLS7-FTTH & OLS7-3 Triple Wavelength Laser Sources
The OLS7-FTTH (1310/1490/1550nm) and OLS7-3 (1310/1550/1625nm) are handheld, rugged Laser sources
designed for performing insertion loss measurements on single-mode fiber optic links when used with an Optical
Power Meter. When paired with an Optical Fiber Identifier, both models may be used for fiber identification.
The OLS7-FTTH and OLS7-3 feature a triple wavelength Laser output from a single port and are easy to operate.
Each wavelength may be transmitted individually at CW or with user selectable modulated Tone. Also, each
wavelength may be transmitted with Wave ID.
• Triple wavelengths from a single port
• Triple, dual, or single Wave ID, CW, Tone
• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
P/N
OLS7-FTTH
OLS7-3
P/N
580XL-FC 580XL-SC 580XL-ST OLS7
test equipment catalog
580XL
Description
1310/1550 nm Laser Source with FC Interface
1310/1550 nm Laser Source with SC Interface
1310/1550 nm Laser Source with ST Interface
Fitel ID-L Light Source
CSS1-SM
The CSS1-SM is a palm-sized, cost-effective dual Laser source designed for performing insertion loss
measurements on single-mode fiber optic links when used with an Optical Power Meter. When paired with an
Optical Fiber Identifier, the CSS1-SM may be used for fiber identification.
The CSS1-SM features 1310 nm and 1550 nm Laser output from a single output port and is easy to operate.
Each wavelength may be transmitted individually at CW or with user selectable modulated Tone. The output port
is equipped with UCI based removable adapters to allow the output connectors to be inspected and cleaned.
• Dual wavelengths from a single port
• CW and modulated Tone
• 270, 330, 1000, 2000 Hz Tone
TE2.6
1310/1550 nm wavelengths
Stable calibrated output
Fixed connector interface FC, ST, SC
Continuous wave and modulated output
Long battery life - approx. 80 hours continuous operation
User selectable auto shut-off
Rugged and splash-proof
Description
Optical Light Source, protective rubber boot, 2 x AA batteries, user’s guide, and carry case
Optical Light Source, protective rubber boot, 2 x AA batteries, user’s guide, and carry case
Noyes CSS1-SM Contractor Series Dual Laser Light Source
P/N
CSS1-SM
P/N
Description
FLS-600
Light Source
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Description
Optical Light Source 2 x AA batteries, user’s guide, and carry case
delivering products, knowledge, service and experience
The Light Source ID-L used in conjunction with our LightFinder™ Fiber Optic Identifier offers you all the right tools
to make your job easier. The ID-L is a light weight, hand-held unit that features a single button control to change the
output mode from CW, 270Hz, 1kHz, and 2kHz. The ID-L is battery powered and includes an auto-shutdown function.
• Operates more than 16 hours by battery (auto shutdown function)
• SC, FC, ST, DIN and DIA connectors are available
• Used in conjunction with the Fitel ID-H LightFinder™ optical identifier
• 1310 nm/1490 nm/1550 nm/1610 nm outputs
• Lightweight design for easy handling
• Removable adapter for easy cleaning
P/N
ID-L
ID-L
Description
Light Source
for more detailed information, visit our web site at
www.tvcinc.com
TE2.7
fiber optic/fttx Test
FIBER OPTIC/FTTx
Optical Test Kits
Optical Test Kits
Noyes SLP4-6D Single-mode Test Kit
Noyes C880 QUAD Certification Test Kit
The SLP4-6D Test Kit combines the OPM4-4D Optical Power Meter and OLS2-Dual Laser Light Source and is ideally
suited for testing single-mode fiber optic networks. The OLS2-Dual features 1310 nm and 1550 nm Laser output from
a single output port and offers several modes of operation. Each wavelength may be transmitted individually at CW
or with user selectable modulated Tone. Also, each wavelength may be transmitted with Wave ID. When transmitting
with Wave ID, the OLS2-Dual supports transmitting pairs of wavelengths in an alternating pattern.
• Wave ID (auto identification & switching)
• Dual or single Wave ID, CW, Tone
• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
Combining two C840 Certification Testers, the C880 QUAD Certification Test Kit is designed for testing and
troubleshooting both multimode and single-mode fiber links. Each tester includes an integrated Visual Fault
Locator (VFL, 650 nm), both single-mode (Laser 1310/1550 nm) and multimode (LED 850/1300 nm) Optical Light
Sources (OLS), and an Optical Power Meter (OPM). Each tester may be used alone as a traditional Power Meter,
Light Source or Visual Fault Locator.
• Integrated OPM, OLS, and VFL (650 nm)
• 850/1300 nm - LED and 1310/1550 nm - Laser sources
• Dual-wavelength certification Pass/Fail
• Two fibers bi-directional and single fiber testing
P/N
SLP4-6D
SLP4-6D
Description
OLS2-Dual optical light source, OPM4-4D optical power meter, AA batteries, protective rubber
boots, adapter cap, SLP4-6D test kit user’s guide, and carry case
P/N
Description
C880
QUAD Certification Test Kit
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
FIBER OPTIC/FTTx
fiber optic/fttx Test
C880
Noyes SLP4-FTTH and SLP4-7 Triple Wave Test Kit with Wave ID and Set Reference
The SLP4 triple wavelength single-mode Test Kits are available in two models, SLP4-FTTH and SLP4-7. The SLP4FTTH and SLP4-7 model combine the OPM4-4D Optical Power Meter and either OLS7-FTTH (1310/1490/1550 nm) or
OLS7-3 (1310/1550/1625 nm) Laser source respectively. The OLS7-FTTH and OLS7-3 feature a triple wavelength Laser
output from a single port and are easy to operate. Each wavelength may be transmitted individually at CW or with
user selectable modulated Tone. Also, each wavelength may be transmitted with Wave ID.
• Wave ID (auto identification & switching)
• Triple, dual, or single Wave ID, CW, Tone
• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
P/N
SLP4-7
SLP4-FTTH
SLP4-FTTH
Description
OLS7-3 optical light source, OPM4-4D optical power meter, AA batteries, protective rubber boots,
adapter cap, SLP4-7 test kit user’s guide, and carry case
OLS7-FTTH optical light source, OPM4-4D optical power meter, AA batteries, protective rubber
boots, adapter cap, SLP4-FTTH test kit user’s guide, and carry case
JDSU ORL-55 Smart Optical Return Loss Meter
The ORL-55 Smart Optical Return Loss Meter is a high-performance, easy-to-use instrument for field, laboratory, and
production use. It combines three different functions in one field-optimized instrument, including an Optical Return
Loss Meter, an Optical Power Meter, and a triple-wavelength Laser Source.
• High-precision ORL testing at 2 or 3 wavelengths (single-mode 1310, 1490, 1550, 1625 nm)
• Three instruments in one: Return Loss Meter/Power Meter/Laser Source
• TRIPLEtest function for simultaneous measurements at three wavelengths in real time
• Auto-zeroing function (patent pending) for increased measurement accuracy
OLR-55
P/N
Description
BN 2287/21
ORL-55 Smart Optical Return Loss Meter 1310/1550 nm
BN 2287/22 ORL-55 Smart Optical Return Loss Meter 1310/1490/1550 nm
BN 2287/23 ORL-55 Smart Optical Return Loss Meter 1310/1550/1625 nm
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Noyes SLP5 Triple Wave Test Kits
The SLP5 triple wavelength single-mode Test Kits are available in two models, SLP5-FTTH and SLP5-7. The SLP5FTTH and SLP5-7 model combine the OPM5-4D Optical Power Meter and either OLS7-FTTH (1310/1490/1550 nm) or
OLS7-3 (1310/1550/1625 nm) LASER source respectively.
• Wave ID (auto identification & switching)
• Triple, dual, or single Wave ID, CW, Tone
• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
P/N
SLP5-7
SLP5-FTTH
Combining the CSM1-2 Optical Power Meter, CSS1-MM Dual LED light source, and CSS1-SM Dual Laser source, the
CKSM-2 is a cost-effective test kit designed for performing insertion loss measurements on multimode as well as
single-mode fiber optic links. Weighing only 0.4 lb each, units are compact and convenient for field use.
The CSS1-MM and CSS1-SM sources feature Dual output, 850 /1300 nm LED or 1310/1550 nm Laser respectively,
from a single output port. Both CSS1 models offer 2 modes of operation, continuous wave (CW) and user selectable
modulated Tone.
• CW and modulated Tone
• 270, 330, 1000, and 2000 Hz Tone
• Power measurements in dBm or μW; insertion loss in dB
SimpliFiber Pro is an improved Fiber Test Set that simplifies and shortens the front-line testing process by:
• Reducing the multiple steps and using a simultaneous dual-wavelength testing feature to measure the range of
power levels in just half the time
• Allowing for a non-touch solution to check for a live fiber without having to plug into ports
• Enabling a network technician to do time-consuming procedures that normally require a team
SimpliFiber® Pro Optical Power Meter and Fiber Test Kits provide you with all the tools you need to help you verify
proper installation and maintain fiber-optic cabling systems. Available in kits or a la carte, these tools are simple and
effective and provide you with the capability to measure loss and power levels, locate faults and polarity issues, and
inspect connector end-faces.
CKSM-2
Description
CSS1-MM Dual LED source, CSS1-SM Dual Laser source, CSM1-2 optical power meter, AA
batteries, 2.5 mm universal adapter cap, UCI-SC connector, 50 and 62.5 µm mandrels, user’s
guide, and carry case
test equipment catalog
TE2.8
Fluke Networks SimpliFiber Pro® Optical Power Meter and Fiber Test Kits
Description
OLS7-3 optical light source, OPM5-4D optical power meter, AA batteries, protective rubber boots,
adapter cap, USB cable, Windows® compatible software and user’s guide, SLP5-7 test kit user’s
guide, and carry case
OLS7-FTTH optical light source, OPM5-4D optical power meter, AA batteries, protective rubber
boots, adapter cap, USB cable, Windows® compatible software and user’s guide, SLP5-FTTH
test kit user’s guide, and carry case
Noyes CKSM-2 Contractor Series Multimode and Single-mode Test Kit
P/N
CKSM-2
SLP5 -7
delivering products, knowledge, service and experience
P/N
FTK2000
FTK1450
FTK1000
FTK1300
FTK1350
Description
Basic Verification Kit (Single-mode) - Includes SimpliFiber Pro Power Meter, 1310/1550
single-mode source (SC port), and carrying case
Complete Fiber Verification Kit: Includes SimpliFiber Pro Power Meter, 850/1300 and 1310/1500
sources (SC port), two (2) FindFiber Remote ID sources, FT500 FiberViewer Video Microscope,
VisiFault VFL, LC and ST adapters, NFC-KIT-BOX cleaning equipment, and carrying case
Basic Verification Kit (Multimode): Includes SimpliFiber Pro Power Meter, 850/1300 multimode
source (SC port), and carrying case
Full-Featured Verification Kit with FiberViewer: Includes SimpliFiber Pro Power Meter, 850/1300
source (SC port), FindFiber Remote ID source, FT120 FiberViewer Optical Microscope, VisiFault
VFL, LC and ST adapters, and carrying case
Full-Featured Verification Kit with FiberInspector Mini: Includes SimpliFiber Pro Power Meter,
850/1300 source (SC port), FindFiber Remote ID source, FT500 FiberViewer Video Microscope,
VisiFault VFL, LC and ST adapters, and carrying case
for more detailed information, visit our web site at
FTK1300
FTK1350
www.tvcinc.com
TE2.9
fiber optic/fttx Test
FIBER OPTIC/FTTx
Optical Test Kits
Microscopes
Corning OTS-600 Series Light Source and Power Meter
Noyes VS 300 View Safe Inspection Scope
The OTS-600 Series is ideal for optical network certification. The unit is designed for testing and troubleshooting of
various telecommunication networks, with ease of use achieved using a large color LCD screen, soft-key menus and
a testing wizard. The OT-600 Series models provide source and meter in one unit to improve bi-directional testing
productivity and the auto wavelength switching and detection feature cuts typical testing time in half while reducing
the potential for errors.
• Source and meter in one unit
• Auto wavelength switching and detection
• USB data ports
The VS 300 Video Fiber Scope removes concerns for eye safety while inspecting optical fiber connectors.
The design eliminates the optical path to the eye by utilizing a miniature camera and a state-of-the-art microdisplay that achieves unparalleled clarity and resolution.
• Video Technology
• No optical path to your eye
• 400X magnification
OTS-600
P/N
VS 300
P/N
Description
OTS-600
Single-mode Test Kit with OS-404RXD (1310/1550 nm Laser) source and integrated 650 nm VFL;
OM-610 power meter; (2) Li-Ion rechargeable batteries and (2) AC power adapters; USB cable for
data transfer; OTS-View software (1) SC source port adapter, (1) SC meter adapter,
(1) ST compatible meter adapter, (1) LC meter adapter, (2) wrist straps, cleaning supplies, hard
transit case and user’s manual
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
P/N
OFS 300
LTK-400
•
•
•
•
•
AXS-200/350
test equipment catalog
TE2.10
Description
Includes: ViewConn with CleanConn (CC-1), Tip for 2.5 mm PC connectors, Tip for 1.25 mm
PC connectors, 4 x AA battery set, 6V DC power adapter, USB2.0 mini-B cable, CD for USB
video driver & display/capture software, Handset Probe, Tip for SC/PC in bulkhead adapters,
AA battery charger, Spare CC-1, Ruggedized cover
View readings on large ViewConn display screen
Power range -60 to +10dBm
Resolution 0.01dB
Wavelengths 850,1300, 1310, 1490, 1550, 1625 nm
Store readings and download later by USB interface
P/N
VC6-OPM
VC6-OPM
Description
Power Meter
EXFO FIP-400 Fiber Inspection Probe
Highly versatile probe to detect dirty/damaged connectors with unparalleled precision.
• Easy back-panel connector inspection
• Truly rugged and lightweight solution for the field
• Image-capture capability for report documentation
Insertion loss test set for multimode and single-mode fiber
1310/1550nm loss measurements; 850/1300 nm loss measurements
Connector for FC, SC, or ST
Rugged package design
Description
Multimode and Single-mode Fiber Optic Test Set w/FC Interface
Multimode and Single-mode Fiber Optic Test Set w/SC Interface
Multimode and Single-mode Fiber Optic Test Set w/ST Interface
Description
Inspection Scope, 2 x AA batteries, neck strap, 2.5 mm universal adapter cap, user’s guide
Lightel VC6-OPM Power Meter
Greenlee Multimode and Single-mode Fiber Optic Test Set
P/N
5890-FC
5890-SC
5890-ST
OFS 300
ViewConn Plus enables inspection of both male and female connectors at the flip of a switch. You can even clean
the patchcord connector right on the ViewConn.
• Eye-safe video viewing
• Ruggedized cover for field use
ViewConn Plus
• Inspect male and female connectors
P/N
ViewConn Plus
Features a Pass/Fail LED indicator and lets you set your own thresholds for loss measurements,
specifically designed for first-class ease of use.
• Clear, LED-based Pass/Fail assessment
• Straightforward step-by-step loss testing wizard for error-free, semi-automated results displayed on
a high-legibility color screen
• Fiber inspection probe port to prevent dirty and damaged connector problems
• Visual fiber location capabilities for quick and easy troubleshooting
• CWDM test solution features fiber inspection probe port and optional visual fiber locator and high
power detector
•
•
•
•
VS 300
Lightel ViewConn Plus
EXFO AXS-200/350 Optical Loss Test Set
P/N
Description
AXS-200/350
Optical Loss Test Set; 800 to 1650 nm; 10 to –75dBm
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Description
Inspection Scope, 2 x AA batteries, neck strap, 2.5 mm universal adapter cap,
and user’s guide
The OFS 300 is a versatile Optical Fiber Scope with precision 200X magnification. This handheld and rugged scope
is used for inspection of optical fiber connectors for scratches, dirt, or other problems normally associated with
poor transmission performance.
• Laser safety filter installed
• Precision 200X zoom
• Universal adapter interface
The LTK-400 Series offers a complete, cost-effective solution for link-loss testing of both multimode and single-mode
systems for those users who do not require data storage capabilities. The LTK offers unparalleled performance by
combining a source that has one of the highest output powers in the industry with a meter that has 10 calibrated
wavelengths. The units can be powered by standard AA alkaline batteries, or by the supplied AC power adapters.
• Rugged handheld design that can withstand the harshest testing environments
• Excellent cost-effective solution for testing fiber optic systems when data storage is not required
• Both the source and meter have field-interchangeable port adapters
Description
Single-Mode Loss Test Kit including OS-404XD source (1310/1550 nm Laser) and OM-410 meter
(no data storage), AA batteries for both units, (2) AC power supplies, SC and ST compatible
jumpers and adapters for SM, manual, (1) SC source port adapter, (1) ST compatible source port
adapter, (1) SC meter port adapter, (1) ST compatible meter port adapter, (2) wrist straps, plastic
case of cleaning supplies, and padded carrying case
Videoscopes
Noyes OFS 300 Optical Microscope
Corning LTK-400 Series Light Source and Power Meter
P/N
LTK-400SD
and
FIBER OPTIC/FTTx
fiber optic/fttx Test
5890
delivering products, knowledge, service and experience
P/N
Description
FIP-400
Fiber Inspection Probe. Standard accessories include Video inspection probe (single or
dual magnification); FC-SC tip for bulkheads; U25M universal patchcord tip for 2.5 mm
ferrules; Plastic case divided into various compartments for tips
Multiple configurations and adapter tips available. Please check with your TVC representative or www.tvcinc.com for details.
for more detailed information, visit our web site at
FIP-400
www.tvcinc.com
TE2.11
Microscopes
and
fiber optic/fttx Test
Videoscopes
Microscopes
and
Videoscopes
FIBER OPTIC/FTTx
JDSU FBE-S Access Kits
JDSU HP3-60-P4 Fiber Inspection & Test System
FBE-S Series kits are designed for the field installer who primarily encounters the more common applications in
today’s fiber optic networks. These kits include a FBE Series probe hardwired to a handheld video display. FBE Series
probes utilize their own inspection tips (FBET Series), which will support the more common connector configurations
in fiber networks.
The JDSU HP3-60-P4 (with integrated patch cord microscope) inspection and test system combines fiber inspection
and optical power measurement into a single seamless handheld device. The result is a significant increase in
workflow efficiency and a decrease in total inspection and test time.
The HP3-60-P4 system, derived from the popular HD3 series, provides high-quality image resolution in a compact,
portable design. The integrated power meter offers quick, easy, and convenient field measurement of optical power
and attenuation. Easy push-button operation makes the device simple and straightforward, while the inspect-test
process establishes optimal workflow practices.
• Inspects both sides of fiber interconnect, and accurately tests and measures optical power with one device
• Integrated functions and features eliminate switching between multiple devices
• Input for FBP series probe microscope and a dedicated patch cord microscope (PCM) let users quickly and
easily inspect both sides fiber interconnects
P/N
FBE-SM1 FBE-SM2 FBE-SM5 Description
Probe Kit. Includes 200x FBE Probe Hardwired to HD3 Display; Tips for Inspecting SC and LC
Bulkheads (Female) and Patch Cords (Male); Soft Case
Probe Kit. Includes 400x FBE Probe Hardwired to HD3 Display; Tips for Inspecting SC and LC
Bulkheads (Female) and Patch Cords (Male); Soft Case
Probe Kit. Includes. 400x FBE Probe Hardwired to HD3 Display with Integrated Patch Cord
Inspection Module; Tips for Inspecting SC and LC Bulkheads (Female); Adapters for Inspecting
SC and LC Patch Cords (Male); Hard-Sided Carrying Case
FBE
JDSU FM-C Series Fiber Microscopes
The FM-C200 is a ruggedized field scope with magnification of 200x and coaxial illumination. It comes with a
universal 2.5mm adapter for inspecting FC, SC and ST connectors.
The FM-C400 is a ruggedized field scope with magnification of 400x and coaxial illumination. It comes with a
universal 2.5mm adapter for inspecting FC, SC and ST connectors.
P/N
FM-C200 FM-C400
The FM-DI100 is a dual illumination 100x Microscope. It uses a pair of white LED’s to provide both coaxial and
oblique illumination. This lighting technique facilitates detecting fine scratches and precisely determining their
location relative to the core. The Microscope includes a universal 2.5mm adapter for inspecting FC, SC and ST
connectors. The DI Series accepts FMAE Series adapters, but can be configured to accept FMA adapters with
the use of a coupler.
The FM-DI200 is a dual illumination 200x Microscope. It uses a pair of white LED’s to provide both coaxial and
oblique illumination. This lighting technique facilitates detecting fine scratches and precisely determining their
location relative to the core. The Microscope includes a universal 2.5mm adapter for inspecting FC, SC and ST
connectors. The DI Series accepts FMAE Series adapters, but can be configured to accept FMA adapters with
the use of a coupler.
The Single-Fiber and Multifiber Connector Cleaning Kits are designed for effective cleaning and visual inspection of
fiber optic connector end-faces in LAN, central office and outside plant environments, whether fully accessible or
through an adapter. Whether performing a ‘dry’ clean, ‘wet’ clean or a combination of the two, each kit offers all the
products recommended for cleaning connectors. Since electrostatic discharge (ESD) is a concern during a ‘dry’ clean,
these kits contain cleaners specifically formulated to dissipate static when the end-face is pulled across a cleaner
surface or a stick is inserted into an adapter. To facilitate end-face inspection prior to mating, as recommended, a
200x microscope is included in the deluxe kits.
P/N
TKT-CLEAN-SFC-M
TKT-CLEAN-MFC-M
Description
Deluxe Kits contain recommended products to effectively clean and inspect 2.5 mm
and 1.25 mm single-fiber connector
Deluxe Kits contain recommended products to effectively clean and inspect multi-fiber
connectors such as MT-RJ and MTP® Connectors
TKT-CLEAN-MFC-M
safety first
Description
DI-Series Fiber Microscope 100x, Dual Illumination, 2.5 mm Adapter
DI-Series Fiber Microscope 200x, Dual Illumination, 2.5 mm Adapter
The Basic Rules For Safe And Efficient Testing
Thorough connector/adapter care and cleaning is where accurate testing starts, as dirt or damage can lead to erroneous
test results, poor transmission and even permanent harm to the link, especially in the case of high-power transmission.
So before performing a connection, ensure that connectors/ adapters are clean and exempt of any defect.
•
The FM-L-series Microscopes use oblique illumination to provide users with a clear view of surface debris and core
condition. It is available in 100, 160, and 200X magnification models that use energy-efficient light emitting diode
(LED) illumination to provide 100,000+ hours of lamp life. The FM-L microscope uses FMA-series adapters that let
users inspect various connector types. Also, its durability, ergonomic design, optical performance, and ease-of-use
make it the optical instrument of choice for viewing fiber terminations in sensitive installations.
• Rugged, ergonomic design for field use
• LED illumination for 100,000+ hour life
• Oblique illumination for superior view of fiber end face cleanliness and core condition
•
•
•
•
FM-L
•
•
Always turn off any laser source before inspecting or cleaning connectors, components or bulkheads. Invisible
radiation can seriously damage your eyesight.
Always wear the appropriate safety glasses whenever required in the work environment.
Always keep a protective cap on unused connectors, and store unused protective caps in sealed container, to
prevent contamination.
Always use appropriate optical cleaning tools.
Never use alcohol, solvent or wet cleaning without a way to ensure that it does not leave a residue on the endface,
as such a residue can harm the equipment.
Never reuse any tissue, swab or cleaning reel. Always discard used tissues and swabs properly.
Never pull or twist any fiber or test jumper.
Description
L-Series Fiber Microscope 200x Oblique Illumination, 2.5 mm Adapter
test equipment catalog
TE2.12
TKT-CLEAN-SFC-M
FM-DI
JDSU FM-L Series Fiber Microscope
FIT-HP3-60
Corning Single-Fiber and Multifiber Connector Cleaning Kits
JDSU FM-DI Series Fiber Microscope
P/N
FM-L200
Description
Handheld display with integrated Power Meter
Handheld display with integrated Power Meter and 400X patch cord microscope
KIT: Dual-mag (200/400X) fiber inspection probe microscope and tips, handheld display with
integrated power meter and 400X PCM, carrying case
KIT: Dual-mag (200/400X) fiber inspection probe microscope and tips, handheld display with
integrated power meter and 400X PCM, cleaning materials, carrying case
FM-C
Description
C-Series Fiber Microscope 200x Coaxial Illumination, 2.5 mm Adapter
C-Series Fiber Microscope 400x Coaxial Illumination, 2.5 mm Adapter
P/N
FM-DI100 FM-DI200
P/N
FIT-HP3-60 FIT-HP3-60-P4
FIT-S105
FIT-S105-C
FIBER OPTIC/FTTx
fiber optic/fttx Test
Source: Compliments of EXFO
delivering products, knowledge, service and experience
for more detailed information, visit our web site at
www.tvcinc.com
TE2.13
fiber optic/fttx Test
fiber optic/fttx Test
Optical Fiber Identifiers
Optical Fiber Identifiers
FIBER OPTIC/FTTx
The OFI 200D and OFI 400 Optical Fiber Identifiers are rugged, handheld, and easy-to-use fiber optic test instruments
designed to detect optical signals transmitted through a single-mode fiber without disrupting traffic. During
installation, maintenance, rerouting, or restoration; it is often necessary to isolate a specific fiber. By simply clamping
an Optical Fiber Identifier onto a gently bent fiber, the unit will indicate if there is [No Signal], [Tone], or [Traffic] and
identify signal direction.
• Rugged, handheld, lightweight
• Accepts 250 μm, 900 μm coated fiber, 3 mm jacketed fiber cable, and ribbon fiber
• No head swapping or adjustments
P/N
OFI 200D
OFI 400
Fitel LightFinder™ ID-H/R Fiber Optic Identifier
OFI 200D
The LightFinder™ ID-H/R Fiber Optic Identifier is a lightweight, handheld, easy-to-use tool to safely and effectively
identify the transmission direction, fiber path, and relative core power on live optical fibers. The LightFinder™
Fiber Optic Identifier uses the super-low insertion loss local detection method of macro-bending. This allows for
detection of the optical signals during installation and maintenance without disconnecting the fiber or interrupting
the traffic signal.
• Easy to use hand-held installation and maintenance tool
• Lightweight design for handheld use
• Carrying case attaches easily to belt or tool pouch (included)
Description
Fiber Identifier. Includes User’s guide and carry case
Fiber Identifier with relative core optical power display. Includes User’s guide and carry case
OFI 400
Wilcom’s Optical Fiber Identifiers are ruggedized and easy to use non-intrusive probes for installation and
maintenance of fiber optic systems. These units are used by technicians to detect live and dark fibers, the direction
of the traffic, relative core power and test tones. The units comes with 3 field easy to change adapter heads for
jacketed, coated or ribbon fiber; optional 2 mm and 1.6 mm adapter heads are also available. Can be used for both
single-mode and multimode. These units utilize local detection technology (non-destructive macro-bend detection);
the need to open the fiber at the splice point for identification and interrupting services are eliminated. These units
are a must have for any technician that is installing, maintaining, rerouting or restoring a fiber optic system.
Description
Basic OFI w/tone and lock
Advance OFI w/digital display
CATV OFI w/digital display
Extended Range OFI
F6121A
P/N
170XL Description
Live Fiber Identifier
Tone Generator
FiberFinder kit, including one TG-300, one LFD-300 and a soft carrying bag
LFD-300
170XL
The HiLite and VFI2 are compact and powerful visible red laser sources designed to troubleshoot faults on fiber optic
cables. Light generated by these units will escape from sharp bends and breaks in jacketed or bare fibers, as well as
poorly mated connectors. They enable technicians to quickly identify faults in fiber optic jumper cables, distribution
frames, patch panels, and splice trays.
• Visible red laser source, 650 nm
• High power, 1.0 mW
• Compact size
P/N
VFI2 HiLite VFI2
HiLite
Description
VFI2 unit, instruction card, and carrying case
HiLite unit, instruction card, and carrying case
TG-300
Wilcom F6230A Visual Fault Locator
The F6230A pocket Visual Fault Locator is an ideal tool for locating tight bends, bad connectors, and testing
of continuity of fiber optic spans and patch cords. The unit comes with a universal connector which can
connect to any 2.5 mm ferrule; an optional adapter for 1.25 mm ferrule is also available. Can be used for both
single-mode and multimode. It is a must have item for every fiber optic technician.
P/N
F6230A
The CheckPoint™ Plus Fiber Identifier uses non-destructive, local detection technology to ensure fiber integrity
and provide reliable identification. It safely clips onto fibers in midspan to detect the presence of a signal without
interrupting traffic with LEDs indicating the type of signal and transmission direction. The integral Power Meter
simultaneously displays the relative core power, allowing isolation and measurement of faults and in-line components
such as splitters, splices and connectors.
• Passive detection of traffic
• Supports multiple sizes
• 850 nm – 1700 nm range
Description
Fiber Identifier with integral meter. Includes leather carrying pouch, operating instructions and
3 interchangeble adapters (FI-30418, FI-30419, FI-30420)
test equipment catalog
Description
Visual Fault Finder
Noyes HiLite and VFI2 Visual Fault Identifiers
Corning CheckPoint™ Plus Fiber Identifier
TE2.14
Finds breaks to 3km
Blinking output mode increases viewing contrast
Easy-to-use quick interface fits all 2.5 mm connector interfaces (FC, SC, ST)
1.0mW output power
F6222C
Pinpoints a specific live fiber without having to disconnect it and without having to guess. The end result: no
more network outages caused by inadequate fiber detection/identification, and a minimized need to access
the network, helping prevent errors.
• Induces minimal loss: ≤ 1dB for any fiber and at any wavelength
• Locates a particular dark fiber using tone recognition (270 Hz, 1kHz, 2 kHz)
• Measures the power transmitted on the fiber
P/N
CheckPoint Plus ID-H/R
Greenlee Visual Fault Finder 170XL
•
•
•
•
EXFO LFD-300 - Live Fiber Identifier/Tone Generator & TG-300 FiberFinder
P/N
LFD-300 TG-300
TK-FF
Description
LightFinder™ Fiber Optic Identifier
Visible Fault Locators
Wilcom Optical Fiber Identifiers
P/N
F6121A F6222
F6222C
F6225
P/N
ID-H/R FIBER OPTIC/FTTx
Noyes OFI Optical Fiber Identifiers
F6230A
Description
Visual Fault Locator
EXFO FLS-240 Pocket Pal - Visual Fault Locator
Straightforward solution for identifying breaks, bends, faulty connectors or splices, as well as other causes of
signal loss.
• Detects faults over distances of up to 5 km
• Bright red laser at 635 nm
• Pulsed and CW operation for up to 50 hours (typical)
FLS-230A
• Universal connector for 2.5 or 1.25 mm ferrule
CheckPoint™ Plus
delivering products, knowledge, service and experience
FLS-240
P/N
Description
FLS-240
Pocket Pal Visual Fault Locator; 635 nm
FLS-230A
Visual Fault Locator; 650 nm
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
for more detailed information, visit our web site at
www.tvcinc.com
TE2.15
fiber optic/fttx Test
Visible Fault Locators
Fiber Optic Cleaning Supplies
Corning VFL-350 Visual Fault Locator
Noyes Cletop Cassette Cleaner Series
FIBER OPTIC/FTTx
The VFL-350 Visual Fault Locator is a compact pen design fault locator used to check single-mode and multimode
optical fiber cables and components for faults or to locate individual fibers in a bundle. By transmitting a bright beam
of red light into a fiber, breaks or improper terminations can be seen as a glowing red light. This device fits all 2.5 mm
connector ferrules and is ideal for field installation of UniCam® MT-RJ and LC Connectors containing the continuity
test set (CTS) feature. There is an optional 1.25 mm adapter for the LC connectors. The VFL-350 operates on two
AAA batteries and emits laser light of 635 nm (Laser Class 2 in accordance with IEC 825-2) with an output power less
than 1.0mW. The robust and compact metal housing makes the device suitable for daily on-site use.
P/N
VFL-350 VFL-350
Description
Visual Fault Locator. Includes dust cap, universal 2.5 mm adapter, 2 AAA batteries and
carrying case
The VisiFault™ Visual Fault Locator (VFL) can diagnose and repair simple fiber link problems. The laser-powered
VisiFault locates fibers, verifies continuity and polarity, and helps find breaks in cables, connectors and splices.
Continuous and flashing modes make for easier identification. Compatible with 2.5 mm and 1.25 mm connectors for
easy connection. Ruggedly constructed for demanding field-testing. Long battery life for hours of use.
• Locates faults including tight bends, breaks and bad connectors
• Accelerates end-to-end fiber checks
• Easily verifies polarity and identifies fibers
Description
Visual Fault Locator with 2.5 mm universal adapter
VisiFault
JDSU Visual Fault Locator
•
•
•
•
Locate bends, breaks, or damages in fiber-optic cable
Continuous or flashing illumination
Class 2 Laser with 1.0 mW for 7km for single-mode and 5km for multimode
Equipped with standard 2.5 mm interface for SC, ST, and FC connectors
P/N
FFL-100 FFL-050
FFL-U12
FFL-050-U25
Description
Visual Fault Locator, Ruggedized - Includes 2.5 mm adapter
Visual Fault Locator, Pocket Size
1.25 mm adapter for FFL-100
1.25 mm adapter for FFL-050
FFL-100
test equipment catalog
Cletop - SA with Blue Tape
Cletop - SB with Blue Tape
Cletop - SB with White Tape
Replacement Tape Type S - Blue
Replacement Tape Type S - White
8500-10-0017MZ
8500-10-0011MZ
8500-10-0012MZ
Noyes One-Click Cleaner
The One-Click Cleaner is an easy-to-use option for cleaning connectors in adapters. Simply insert the One-Click
Cleaner into an adapter and push until an audible “click” is heard. The One-Click Cleaner uses the mechanical push
action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is
effectively, but gently, cleaned.
• Cleans both APC and UPC connectors
• Ergonomic, comfortable design with single action cleaning
• Precise mechanical action delivers consistent cleaning results
P/N
8500-05-0001MZ
8500-05-0002MZ
P/N
FCR-001
FCR-002
Description
Cleans SC, ST, and FC connectors in adapters and exposed 2.5mm ferrules
Cleans LC and MU connectors in adapters and exposed 1.25mm ferrules
Description
CleanChek Connector Cleaner
Box of 6 Replacement Reels for CleanChek
FCR-001
FTTx/IP Triple-Play Test
The FR2 Fiber Ranger Fault Locator is a ruggedized, light weight and easy to use Optical Fault Locator for both
single-mode and multimode applications. It is designed with a reflective technology that allows you to pinpoint
optical faults in the connectors, end to fiber, and clean breaks within 20 kilometers. This unit has been designed with
the user in mind with easy to use features. It is a must have for testing applications in Wide Area Networks (WAN),
telecommunications span of 20 kilometers, fiber to the curb, and installation and maintenance of both single-mode
and multimode fiber optic systems.
TE2.16
Cletop – S Series
8500-10-0020MZ 8500-10-0029MZ 8500-10-0016MZ 8500-10-0021MZ 8500-10-0017MZ
The FCR-001 CleanCheck™ Connector Cleaner is a simple solution for cleaning male fiber optic connector
end-faces. CleanCheck™ is highly effective in completely removing all types of debris, dust particles, oil and
grease from fiber surfaces, and eliminates the need for many other cleaning alternatives such as solvents,
optical wipes, swabs or compressed gases.
Wilcom FR2 Fiber Ranger Fault Locator
Description
Optical Fault Locator
Optical Fault Locator
Optical Fault Locator
Description
8500-10-0016MZ
JDSU FCR-001 CleanChek Connector Cleaner
Optical Fault Locators
P/N
FR2-SC
FR2-ST
FR2-FC
P/N
Cletop – Original Series
8500-10-0027MZ Cletop Type A with Blue Tape
8500-10-0011MZ Cletop Type A with White Tape
8500-10-0028MZ Cletop Type B with Blue Tape
8500-10-0014MZ Cletop Type B with White Tape
8500-10-0032MZ Cletop for MT-RJ with pins (White Tape)
8500-10-0033MZ Cletop for MPO/MTP with pins (White Tape)
8500-10-0012MZ Replacement Tape Blue
8500-10-0015MZ Replacement Tape White
Fluke VisiFault Visual Fault Locator
P/N
VisiFault
The Cletop Connector Cleaner is a rugged palm-sized cleaner that offers exceptional performance with a proven track
record. The choice of many leading manufacturers and telecom carries worldwide for nearly 20 years – Cletop is a
name you can rely on.
• Cletop Series - Original version (proven reliability)
• Cletop – S Series - Second generation cleaner offering the same Cletop cleaning performance with “Drop-in”
replacement tape cartridge and ergonomic design that works equally well for left or right handed operators
EXFO AXS-200/650 IP Triple-Play Test Set
FR2
Offers a quick, yet thorough method for deploying triple-play services - IP-based data, VoIP and IPTV - facilitated by
Pass/Fail-driven automated tests.
• Simple, affordable residential IP triple-play testing with Pass/Fail indication
• IPTV and VoIP service assurance using a comprehensive range of QoS metrics
• Feature-rich, but cost-effective: Ethernet 10/100 termination and Ethernet 10/100 pass through with triple-play
QoS measurements
TK-AXS-650
P/N
Description
TK-AXS-650
IP Triple-Play Test Set
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
delivering products, knowledge, service and experience
for more detailed information, visit our web site at
www.tvcinc.com
TE2.17
FIBER OPTIC/FTTx
fiber optic/fttx Test
fiber optic/fttx Test
VoIP/Telecom Test
Inside Wire Testers
EXFO FTB-5240S - Optical Spectrum Analyzer
Tempo Sidekick V.O.C.
High-resolution, high-precision optical spectrum analyzer (OSA) that covers your DWDM applications and all channel
spacings, from 50 GHz DWDM to CWDM.
• Truly portable spectral characterization for DWDM network commissioning
• In-band OSNR measurement for 40 Gbit/s and ROADM deployments
• Automated channel discovery feature for easy setup and measurement
• Over 90dB dynamic range per scan
The Sidekick V.O.C. is the test set to troubleshoot twisted pair applications. This lightweight, hand-held meter
quickly and accurately uncovers intermittent troubles that other test sets can’t detect.
• Identifies defective inside wiring and jacks
• Identifies shorts, opens, crosses and grounds
• Measures resistance, AC/DC volts and pair balance
P/N
1143-5000
P/N
Description
FTB-5240S
Optical Spectrum Analyzer; 1250 to 1650 nm; 18 to -75dBm
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
FTB-5240S
The Sidekick® Plus Advanced Cable Maintenance Test Set is a multifunction test tool that will improve any
technician’s testing and troubleshooting capabilities on twisted pair.
• Determines the stressed noise susceptibility of dry and working pairs
• Complete metering of voltage, current and resistance on copper cables
• Patented stress balance test
• Measurement of distance to opens
The OCC-55 is an innovative selective Power Meter for CWDM applications. The OCC-55 is a low-cost
alternative solution to optical spectrum analyzers. It scans CWDM systems and automatically records all
channel key measurements including wavelength, frequency and related power level.
• Measure up to 18 CWDM wavelengths specified by ITU-T G.694.2 standards
• Report generation with OFS-355 SMART Optical Reporting Software
P/N
1155-5000
OCC-55
Description
OCC-55 CWDM Channel Checker
The OCC-56 SMART Optical DWDM Channel Checker is an innovative selective Power Meter for DWDM
applications. The OCC-56 is a low-cost alternative solution to optical spectrum analyzers (OSA) and
automatically scans power levels for channels defined in the ITU-T grid.
• Supports C-band and L-band applications
• Low-cost alternative to an OSA
1155-5000
Description
Sidekick® Plus Test Set
Tempo Sidekick T&N Deluxe Tel/Com Field Tester
The Sidekick T&N combines the functions of the Sidekick 7B plus the features of transmission and noise
testing. The result is an even more versatile test set that identifies frequently missed faults as well as tests
and qualifies the transmission quality of POTS lines. The additional features include:
• Loop Current testing
• Circuit Loss testing
• Metallic Noise testing
• Power influence testing
• Load Coil detection
JDSU OCC-56 SMART Optical DWDM Channel Checker
P/N
BN 2277/41
BN 2277/42
Description
Sidekick V.O.C.
Tempo Sidekick® Plus
JDSU OCC-55 SMART Optical CWDM Channel Checker
P/N
BN 2277/40
1143-5000
VoIP/TELECOM
FIBER OPTIC/FTTx
WDM/Optical Spectrum Analyzers
OCC-56
Description
OCC-56 C (C-band) CWDM Channel Checker
OCC-56 L (L-band) CWDM Channel Checker
P/N
1137-5002 1137-5002
Description
Sidekick T&N
how to
Quick Overview on How to Use the Tempo Sidekick VOC on a New Install to Verify that there are no Inside Wiring Problems
Dispersion Analyzers
1. Interview the customer on how his /her phones have been working.
2. Connect the red and black (ring and tip) connectors of the Sidekick to the pair of the inside wires to be tested. Connect the green connector to a ground source.
3. Do the AC test to confirm that there is no AC present tip to ring (T-R), ring to ground (R-G) and ring to ground (R-G).
4. Remove the ILEC/eMTA from the loop, perform a DC test to verify that there is no DC.
5. Move the green connector to another wire or another pair in the inside wire.
6. Rotate dial to Stress Test. Verify stress test reference ground. Final reading should be less than 20dBrnC.
7. Switch dial to Leakage Test and wait 15 seconds, reverse polarity, wait 15 more seconds, reverse polarity again and wait 15 more seconds. The needle should
be near infinity. Do this for each of T-R, R-G and T-G.
From the time you begin with the AC test to completion should take less than 10 minutes.
EXFO FTB-5700 CD/PMD - Single-Ended Dispersion Analyzer
Combines CD and PMD measurement into a highly automated, high-efficiency, single-ended test solution.
• Single-ended PMD and CD measurements
• Complete dispersion analysis with a single module, a single connector and a one-step test setup
• Unparalleled software user-friendliness: all automated
• Testing range: up to 140km
P/N
Description
FTB-5700
Single-Ended Dispersion Analyzer; 1475 to 1626 nm
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
FTB-5700
Source: Compliments of Tempo
JDSU TestifierPRO™ Cable Tester
The TestifierPRO™ Cable Tester provides telecom, datacom, and cable installers and technicians with cable test,
length measurement, and hub blink functions in one unit. The easy-to-use TestifierPRO Cable Tester requires onebutton operation to initiate telco, network, and coax modes for diagnostic tests and results. The main unit includes
built-in RJ11 and RJ45 jacks for testing six-wire and eight-wire twisted pair and F-connector for testing coax.
• Identifies cable termination on active ports by blinking port LED
• Measures cable length using patented cable capacitance method
• Displays single-ended test results in wiremap format for opens, shorts, and split pairs
Fibre Channel Testers
EXFO FTB-8525/8535 Packet Blazer - Fibre Channel and Ethernet Test Modules
Deliver FC-0, FC-1 and FC-2 logical layer Fibre Channel testing for services delivered via transport protocols such as
DWDM, SONET/SDH and dark fiber.
• 1x, 2x, 4x and 10x full-line-rate Fibre Channel traffic generation and BER testing
• FC-0, FC-1 and FC-2 logical layer configuration for Fibre Channel port definition, testing and performance analysis
• Round-trip latency measurement and buffer-to-buffer credit estimation
• Ethernet service performance validation through RFC 2544, BER testing and multistream generation and analysis
P/N
Description
FTB-85xx
Fibre Channel and Ethernet Test Modules
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
test equipment catalog
TE2.18
FTB-85
delivering products, knowledge, service and experience
P/N
TP650
TP655
TP650
Description
TestifierPRO Cable Tester with cable test remote. Includes 30.48cm (1 ft) RJ45 to alligator clips
cable (TP40), two 30.48 cm (1 ft) patch cables with RJ45 connectors (TP55), #1 coax cable test
remote (TP65), and pouch. Requires 9-volt battery (not included)
TestifierPRO Cable Tester with 8 cable test remotes. Includes 30.48 cm (1 ft) RJ45 to alligator
clips cable (TP40), two 30.48 cm (1 ft) patch cables with RJ45 connectors (TP55), 30.48 cm (1 ft)
coax cable (TG30), #1 coax cable test remote (TP65), and pouch. Requires 9-volt battery
(not included)
for more detailed information, visit our web site at
www.tvcinc.com
TE3.1
VoIP/Telecom Test
Inside Wire Testers
Butt Sets
JDSU Tri-Porter™ Premises Wiring Tester for Voice, Data & Video
Fluke Networks TS®25D Test Set
The Tri-Porter™ Premises Wiring Tester enables a full range of premises cabling tests with a single tool. It provides
full diagnostic capability for network, telephone, and video systems with wiring qualification and fault diagnosis,
cable tracing, location identification, and presence of service detection. Tri-Porter consists of a main unit and cable
test remote/probe that enables technicians to test, troubleshoot, and qualify telco, network, and coax cable systems.
• Voice Telephony Testing including advanced function butt set
• Data Testing Ethernet Networks including port discovery and ping
• Video RF Detection and Testing including signal level measurement and TDR
• All service wire mapping
The TS25D Test Set features data lockout and lockout override, making you completely safe in talk or monitor mode.
Includes DSL/POTS filtering technology and a built-in analog tone generator. The Talk Battery function provides
voltage to carry voice conversation on non-powered pairs. Also includes caller ID and call-waiting caller ID function.
Large LCD makes the intuitive menus easy-to-read and use.
• Caller ID and Call Waiting Caller ID
• Amplified speakers for hands-free monitoring
• Data lockout and data lockout override
• Tone generator for wire identification
P/N
IVT600
IVT600
P/N
25501109
25501009
25501004
25500400
25500300
Description
Network Qualification and Testing Tool
TS25D
VoIP/TELECOM
Description
TS25D test set with ABN kit (includes pouch and earpiece)
TS25D test set with ABN
TS25D test set with 346A plug
TS25D Pouch only
TS25D battery door with belt clip
VoIP/TELECOM
VoIP/Telecom Test
Fluke Networks TS®22 Test Set Series
Triplett Model 8455 Telco Tester
•
•
•
•
•
•
•
Compact, Reliable, Industry Standard
Checks Line Shorts, Opens and Multiple Ringers
Measures DC Voltages and Resistance
Ranges: Points 0-100; DC Volts 0-100
Polarity-Reversing Switch
R ÷ 10 Switch
Reverse Switch for Line Checks
P/N
3072
3073
3121
3072
P/N
22800009
22800007
22800004
22800001
22800HI9
22801001 22801004 22801007 22801009 Description
Model 8455-L1 (w/ 79-619 leads & case)
Model 8455-L2 (tester only)
Model 8455-L1 (w/ 79-662, 79-668 leads & case)
Triplett Line-Bug 4
•
•
•
•
•
•
Description
TS22 test set with ABN
TS22 test set with ground start cord
TS22 test set with 346A plug
TS22 test set with piercing pin clips
TS22 test set, hearing impaired with ABN
TS22A test set with piercing pin clips
TS22A test set with 346A plug
TS22A test set with ground start cord
TS22A test set with ABN
TS22
Fluke Networks TS®30 Test Set
Tests standard telephone jacks and LAN jacks for connection to telephone system
Has both RJ-11 and RJ-45 style plugs
4 Tri-color (Red/Green/Amber) LEDs indicate Current, Polarity, & Ringing / AC Voltage on each line
Tests Single Line, 2 Line, 3 Line, or 4 Line jacks to USOC (telephone) standard
Tests LAN lines and jacks (RJ-45) wired to 568A/B standard for telephone line current
RJ-45 test plug is selectable via front panel switch for USOC (telephone) or 568 (LAN) connection
P/N
9615
The TS22 Test Set Series offers an unbeatable combination of reliability, durability and expanded utility. The unique
built-in amplified speaker provides three audio levels for hands free listening and use with automated voice-response
systems. The TS22A offers a two-way speakerphone. Store up to nine, 18 digit telephone numbers in speed dial.
• TS®22 Test Set has an amplified speaker for hands-free monitoring
• TS®22A Test Set has a two-way speakerphone for true hands-free conversation
• DropSafe™ reliability passes 20 foot drop test
• RainSafe protection in severe weather conditions
9615
Description
Phone / LAN Line Tester
The TS30 Test Set features the latest in case design. The ergonomic non-slip grip handle provides improved handling
of the set in all weather conditions. Includes DataSafe® operation so technicians can clip onto a line in Monitor mode,
without disrupting existing data traffic.
• High impedance DataSafe™ operation in Monitor mode
• DropSafe™ reliability passes 20 foot drop test
• RainSafe™ protection in severe weather conditions
• Mute switch
P/N
30800009
30800001
TS30
Description
TS30 test set with ABN
TS30 test set with piercing pin clips
Fluke Networks TS®19 Test Set
Triplett WireMaster XR-5 - LAN Cable Test Sets
•
•
•
•
•
•
Tests 5 Types of Cables RJ-45, RJ-11, BNC, 1394, USB
Simple One Button Test
Ergonomic, Portable Handheld Design
Tests Installed Wiring or Patch Cables
Remote Attaches to Main Unit
600 ft test distance (RJ-45 / RJ-11 / BNC)
P/N
3260
Description
5 Cable Tester
test equipment catalog
TE3.2
3260
3260
The TS19 test set combines all essential test set features in one set. This test set was specifically designed for inhouse telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto
a data line while in Monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or
pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect
combination of features and price.
• High impedance DataSafe™ operation in monitor mode
• Tone (DTMF) and pulse operation
• Last number redial
P/N
19800009
19800003
delivering products, knowledge, service and experience
TS19
Description
TS19 test set with ABN
TS19 test set with banana jacks to alligator clips
for more detailed information, visit our web site at
www.tvcinc.com
TE3.3
VoIP/Telecom Test
VoIP/Telecom Test
Butt Sets
Butt Sets
Tempo Telephone Test Set
JDSU Lil’ Buttie Pro Butt-In Telephone Test Set
P/N
PE961
The Lil’ Buttie PRO™ Telephone Test Set is designed for use by datacom, telecom, and cable installers and
technicians. The compact test set is small enough to wear on a belt or fit in a pocket and features a shape that is
comfortable to hold. The LCD shows on-hook voltage, off-hook current, and polarity as well as caller ID, call waiting
caller ID, number dialed, setup, stored numbers, battery condition, and other information.
• Detects and displays caller ID and call waiting caller ID
• Scrolling list of stored numbers
• Alphanumeric LCD with icon flags
PE961
Description
Test Set with Two-way Hands Free and DigAlert
VoIP/TELECOM
PE830
Tempo Tele-Mate™ Pro Telephone Test Set
The Lil’ Buttie Ranger™ Telephone Test Set is an advanced, DSL-safe telephone test set for use by datacom, telecom, and
cable installers and repair technicians. The compact test set is small enough to wear on a belt or fit in a pocket and features
a shape that is comfortable to hold. The LCD display shows on-hook voltage, off-hook current, and polarity as well as caller
ID, call waiting caller ID, number dialed, setup, scrolling list of stored numbers, battery condition, and other information.
• Provides DSL-safe operation
• Views and stores digits as dial-out is in progress
• Identifies inbound and outbound lines
Description
Tele-Mate™ Pro Telephone Test Set
P/N
LB255
LB255-BT
LB260-BT Tempo Tele-Mate Communications Test Set
Designed for communications wiring installation and repair to quickly verify the quality of a new installation.
• Headset for hands-free operation
• Rugged design for demanding use
• Compact design and durable belt clip make it easy to carry
P/N
PE810
Description
Tele-Mate Communication Test Set
Description
Lil’ Buttie PRO Telephone Test Set. Includes 1.22m (4 ft) RJ11 to angled bed-of-nails cord set
(LB35), headset with boom microphone, and 9-volt battery
Lil’ Buttie PRO Telephone Test Set with protective boot. Includes protective boot, 1.22m (4 ft)
RJ11 to angled bed-of-nails cord set, headset with boom microphone, and 9-volt battery
JDSU Lil’ Buttie™ Ranger Butt-In Telephone Test Set
The Tele-Mate Pro Telephone Test Set will help you deal with the increasing complexity of telecom installation
and maintenance.
• Complete telephone set with ringer
• Phone to phone intercom
• Caller ID with name display
P/N
PE830
P/N
LB220
LB220-BT
LB220
VoIP/TELECOM
The PE961 Test Set features our DigAlert over-voltage alarm and lock-out function to eliminate the danger of
damaging or knocking out digital service lines. It also provides full ADSL compatibility.
• Features DigAlert over-voltage alarm and lock-out function to eliminate the danger of damaging or
knocking out digital service lines
• The PE961 provides full ADSL compatibility
• Ten-number speed dial memory (32 digits each)
• Last number redial
JDSU Resi-Talker™ Butt-In Telephone Test Set
PE810
LB255
Description
Lil’ Buttie Ranger Telephone Test Set. Includes 1.22m (4 ft) RJ11 to angled bed-of-nails
cord set (LB35), headset with boom microphone, nylon pouch, and 9-volt battery
Lil’ Buttie Ranger Telephone Test Set with protective boot. Includes protective boot, 1.22 m (4 ft)
RJ11 to angled bed-of-nails cord set, headset with boom microphone, nylon pouch, and 9-volt battery
Lil’ Buttie Ranger Telephone Test Set with hook-type belt clip and protective boot. Includes rugged
hook-type belt clip (LB75), protective boot (LB81), 1.22m (4 ft) RJ11 to angled bed-of-nails cord
set (LB35), headset with boom microphone (LB40B) and 9-volt battery
LB66
Identify POTS dial tone with an economical butt set.
• Tone and pulse dialing
• Microphone mute
• Last number redial --- 32 Digits
• Continuous line polarity indication (TALK or MONITOR)
P/N
LB300
LB64
LB66
LB68
Description
Resi-Talker Test Set with alligator clips cord set
4-Position Modular Adapter
6-Position Modular Adapter
8-Position Modular Adapter
LB300
JDSU Lil’ Buttie Butt-In Telephone Test Set
The Lil’ Buttie™Telephone Test Set is designed for use by datacom, telecom, and cable installers and technicians.
The compact test set is small enough to wear on a belt or fit in a pocket and features a shape that is comfortable to
hold.
Additional standard features of the Lil’ Buttie include electronic ringer, microphone mute, continuous polarity
indication for talk or monitor, PBX pause button, redial memory, and others. This telephone test set is the choice for
technicians worldwide.
• Amplified line monitor for volume levels comparable to off-hook
• Tone and pulse dialing
• Battery-powered Monitor mode
P/N
LB110
LB110-BT
Description
Lil’ Buttie Telephone Test Set with angled bed-of-nails cord set. Includes 1.22 m (4 ft) RJ11 to
angled bed-of-nails cord set, headset with boom microphone, metal belt clip, and 9-volt battery
Lil’ Buttie Telephone Test Set with rubber boot and angled bed-of-nails cord set. Includes
protective rubber boot, 1.22m (4 ft) RJ11 to angled bed-of-nails cord set, headset
with boom microphone ,metal belt clip, and 9-volt battery
test equipment catalog
TE3.4
Trace & Talk Sets
JDSU Talk-N-Trace™ Communication and Tracing Device
LB110
delivering products, knowledge, service and experience
Talk-N-Trace™ is a hands-free communications test set that ensures clear, clean voice communication without
interference or dropouts over coax cable, audio cable, speaker wire, telephone lines, and common electrical wiring.
Used in any wiring environment to secure point-to-point full duplex communication, Talk-N-Trace works together to
trace wires simultaneously while talking and is suitable for cable length ranges of up to 1.52km (5,000 ft).
• Full duplex, hands-free, self-powered communications
• Link up to four units together for party-line use
• Full ring alert function
P/N
TM110
Description
Talk-N-Trace Communication and Tracing Set. Includes two Talk-N-Trace test units, two mini
over-the-ear headsets with boom microphone, two 1.22 m (4 ft) RJ11 to alligator clips
cord sets, and two 60.96 cm (2 ft) banana plug to test probe cable assemblies. Requires two
9-volt batteries (not included)
for more detailed information, visit our web site at
TM110
www.tvcinc.com
TE3.5
VoIP/Telecom Test
VoIP/Telecom Test
Wire Mappers
Wire Mappers
Fluke Networks MicroMapper™ Pro VDV Cable Tester
JDSU Speaker Seeker™ Wiremapping Tester
MicroMapper™ Pro is a simple VDV Cable Tester, designed to reliably and quickly test terminations and length,
thus speeding installation time and reducing callbacks. MicroMapper™ simplifies every aspect of the testing and
verification process.
• Simple interface - displays full wiremap for twisted pair and coax connectors on large LCD screen
• Multimedia support - built-in support for twisted pair and coax (F) cables with no need for adapters
• Built-in Analog toning - locates and isolates wire pairs during installation
The Speaker Seeker™ enables one installer to quickly identify both ends of up to 20 unterminated twisted pair or
coax cables at a time. The LED shows the unique number of the ID-only remote attached to the other end of each
cable run. When Speaker Seeker detects a condition other than an open circuit, it powers up automatically and
displays results until disconnected. The handheld unit also detects and displays short and high voltage conditions.
• Identifies up to 20 audio, coax, or security/alarm cable runs at a time
• Alligator clip and F-connector contacts
MMP-50
P/N
TP400
TP410
Description
MicroMapper™ Pro VDV Cable Tester, #1 Cable ID, F-type adapter, multi-language Getting
Started Guide, batteries
Includes: MicroMapper™Pro VDV Cable Tester, Pro3000™ Tone Probe, # 1-8 Cable IDs, F-type
adapter, multi-language Getting Started Guide, batteries
Description
Speaker Seeker with two-lead ID-only remotes. Includes set of 20 (1–20) two-lead ID-only
remotes, 60.96 cm (2 ft) F push-on connector to alligator clips cable assembly, and 9-volt battery
Speaker Seeker with coax ID-only remotes. Includes set of 20 (1–20) coax ID-only remotes,
60.96 cm (2 ft) F push-on connector to alligator clips cable assembly, and 9-volt battery
VoIP/TELECOM
JDSU LanRoamer™ Cable Tester
Greenlee NETcat 100 Micro Digital VDV Wiring Tester
®
•
•
•
•
•
•
•
•
Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables
TIA/EIA standard wiring pair verification
Detects shorts, opens, reversed polarity, crossed and split pairs
Generates three distinct, selectable digital tone patterns for cable tracing and troubleshooting
Tracing modes can be adjusted for high performance LAN cables
Complete set of connector types standard (telephone, LAN and coax)
Nested remote allows end-to-end testing of all wiring types
Simple testing of LAN wiring and phone lines
P/N
NC-100
NC-100
The LanRoamerPRO™ is a Length Measurement Tool, Cable Tester, and Tone Generator in one unit. The LCD, four
momentary buttons, single end testing capability, and other features make the LanRoamerPRO an easy-to-use tool for
residential, datacom, telecom, and cable contractors and installers.
• Measures cable length in feet or meters
• Two-line, 16-character alphanumeric LCD with icon flags displays test results in wiremap format
• Conducts single-ended tests on shorts, splits, and opens
Tests shielded twisted pair (STP) unshielded twisted pair (UTP) and coaxial cables
Generate four distinct, precision tones for tracing low-loss cables like Cat 5
Identifies active network devices (PC or Hub) on 10/100 Base-T networks.
Displays network device capabilities
Detects shorts, opens, reversed, crossed and split pairs
Office identification using remote ID units
Troubleshoots and verifies a wide range of networks
Remote jack ID and verification
P/N
NC-500 NC-510
Description
NETcat® Pro Structured Wiring Troubleshooter
NETPro Accessory Kit with 7 Digital Testers and soft case for NC-500
NC-500 w/NC-510
The Testifier™ Cable Tester provides full cable test and tone generation in one unit for telecom, datacom, and cable
installers and technicians. The easy-to-use Testifier features one-button operation to initiate telco, network, and coax
modes for diagnostic tests and results.
• Displays tests for shorts, opens, miswires, reversals, and split pairs in wiremap format
• Integrated jacks for telco and network connections, F-connector for coax
Description
Testifier Cable Tester with onboard cable test remote. Includes 30.48 cm (1 ft) RJ45 to alligator
clips cable, 19 cm (7.5 in) RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45 jacks,
nylon case, and 9-volt battery
Testifier Cable Tester with onboard cable test remote, 30.48 cm (1 ft) RJ45 to alligator
clips cable, 19 cm (7.5 in) RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45 jacks, set
of 20 RJ45 ID-only remotes, and case
test equipment catalog
TE3.6
P/N
TP600
TP607
TP600
Description
LanRoamerPRO Cable Tester with onboard cable test remote. Includes 30.48 cm (1 ft) RJ45 to
alligator clips cable, two 30.48 cm (1 ft) patch cables with RJ45 connectors, wire
configuration sticker, and nylon pouch. Requires 9-volt battery (not included)
LanRoamerPRO Cable Tester Kit with 8 cable test remotes. Includes 30.48 cm (1 ft) RJ45 to
alligator clips cable, RJ45 to coax F-connector adapter, two 30.48 cm (1 ft) patch cables with
RJ45 connectors, wire configuration sticker, and nylon pouch. Requires 9-volt battery (not included)
JDSU TestifierPRO™ Cable Tester
JDSU Testifier™ Cable Tester
P/N
TP350
KP321
Description
LanRoamer Cable Tester. Includes onboard cable test remote, 30.48 cm (1 ft) patch cable with
RJ45 connectors, nylon pouch, and 9-volt battery
JDSU LanRoamerPRO™ Cable Tester
Greenlee NETcat® 500 Pro VDV Digital Wiring Troubleshooter
•
•
•
•
•
•
•
•
TP500
The LanRoamer™ is a Cable Tester and Tone Generator in one unit. It displays cable test results using indicator
lights on the main and remote unit. LanRoamer is an easy-to-use tool for residential, datacom, telecom, and cable
contractors and installers. When the unit senses a connection between the main and remote unit, the battery-saving
auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the
cable being disconnected.
• Displays cable test results on main and remote units in less than 2 seconds
• Identifies shorts, opens, miswires, reversals, and split pairs
• Auto-on initiates test when a connection is sensed between main and remote unit
P/N
TP500
Description
NETcat® Micro Digital Voice, Data and Video Wiring Tester
VoIP/TELECOM
P/N
MMP-50
MMP-KIT
TP400
TP350
delivering products, knowledge, service and experience
The TestifierPRO™ Cable Tester provides telecom, datacom, and cable installers and technicians with cable test,
length measurement, and hub blink functions in one unit. The easy-to-use TestifierPRO cable tester requires onebutton operation to initiate telco, network, and coax modes for diagnostic tests and results. The main unit includes
built-in RJ11 and RJ45 jacks for testing six-wire and eight-wire twisted pair and F-connector for testing coax.
• Identifies cable termination on active ports by blinking port LED
• Measures cable length using patented cable capacitance method
• Displays single-ended test results in wiremap format for opens, shorts, and split pairs
P/N
TP650
TP655
TP650
Description
TestifierPRO Cable Tester with cable test remote. Includes 30.48 cm (1 ft) RJ45 to alligator clips
cable, two 30.48 cm (1 ft) patch cables with RJ45 connectors, #1 coax cable test remote, and
pouch. Requires 9-volt battery (not included)
TestifierPRO Cable Tester with 8 cable test remotes. Includes 30.48 cm (1 ft) RJ45 to alligator
clips cable, two 30.48 cm (1 ft) patch cables with RJ45 connectors, 30.48 cm (1 ft) coax cable,
#1 coax cable test remote (TP65), and pouch. Requires 9-volt battery (not included)
for more detailed information, visit our web site at
www.tvcinc.com
TE3.7
VoIP/Telecom Test
VoIP/Telecom Test
Wire Mappers
Tone & Probes
Paladin LAN ProNavigator™ Tester
Tempo 402K CATV Tone/Probe Kit
Test data & telephone cable for proper pairing for EIA/TIA-568A & B, Token Ring, 10Base-T & common Cat5,
Cat5e, Cat6 configurations. Also tests continuity of 50 & 75ohm coaxial cables with BNC terminations.
• One-button, simple testing (PASS/FAIL or fault find) to detect: good connections, opens,
crossed wires & split pairs
• Traces wires with tone & remote lights
• Quick fault analysis
P/N
1543
Designed specifically for the CATV industry, the 402K Cable Tone Test Kit sends tone through any passive device
along the cable path, such as splitters, traps and directional couplers. No more figuring out non-tagged or
mistagged cable drops. The 402K is simple to use and provides fast, accurate results.
• Designed for the CATV market
• Kit allows you to tone through splitters directional couplers and traps
1543
P/N
402K
Description
LAN ProNavigator™ Tester
Description
CATV Tone/Probe Kit
402K
Tempo 701K Classic Tone and Probe Kit
•
•
•
•
•
•
•
Verifies point-to-point wiring of twisted pair LAN cables, telephone cables, and other types of
cables that use RJ-45 & RJ-11 connectors
New “Local Mode” allows for testing of patch cables
Tests LAN Crossover & Telephone patch cables
Checks continuity in cable conductors
Generates 2 distinct warble tones usable for cable tracing
Checks “straight-through”, “reverse wired”, & “crossover” patch cables
8 LED’s identify the source and destination of each conductor
P/N
3254
3254
Description
WireMaster XR-2
P/N
701K
Description
Classic Tone and Probe Kit
701K
Tempo 801K Premium Tone/Probe Kit
Designed for more accurate wire identification, the 801K virtually eliminates power-related noise from their tone
and probe operation. The 801K Premium Tone & Probe Kit offers all the features professionals are looking for.
Includes the 77HP/6A High Power Tone Generator with bent nose piercing clips, increased talk battery supply
and higher voltage protection and the 200FP Filter Probe for filtering out AC hum. Tone, probe and generator
come housed in the rugged woven polyester 700C Dual Carry Case designed for years of dependable use. All
components are also available separately.
TDR & Fault Finders
Fluke Networks TS®90 Cable Fault Finder
P/N
801K The TS®90 is an easy-to-use three tools in one tester -- a Fault Locator, a Cable Inventory Manager and a Toner
with SmartTone™ technology. (Up to 2,500 feet). Easily find the distance to opens or shorts on electrical wire,
telephone wire, security wire and coax. Displays distance reading rather than waveform.
• Works on any two or more conductor cable up to 2,500 feet (metric unit also available)
• Instantly measures distance to open or any fault from one end of any cable pair
• Patented SmartTone™ tone generator positively identifies pair
P/N
26500090
26501100
26501200
26501300
26501600
26501700
26501160
When it comes to wire identification, there’s no better tool to have than the 701K Classic Tone & Probe Kit. This
popular tone & probe kit is used by technicians everywhere to identify single conductors or cables within a
bundle at a cross-connect point, or at remote ends.
• Wire Identification and tracing
• 77HP - Tone Generator
• 200EP - Inductive Amplifier
VoIP/TELECOM
VoIP/TELECOM
Triplett WireMaster XR-2 - Lan Cable Test Sets
801K
Description
Premium Tone and Probe Kit
Tempo 711K Professional Tone/Probe Kit
Description
TS90 Cable Fault Finder with BNC to alligator clips
TS100/TS90 linecord, BNC to alligator clip
TS100/TS90 linecord, BNC to F(MALE)
TS100/TS90 linecord, BNC to F(FEMALE)
TS100/TS90 linecord, banana
TS100/TS90 linecord, BNC to banana to Angled Bed-of-Nails clips
TS100/TS90 pouch with belt clip
TS90
Designed for the telecom professional, this kit is for use on single conductors, twisted pairs, coax cables and
de-energized electrical wiring. The only thing missing is complexity.
The 77GX Tone Generator incorporates a host of features including microprocessor controlled circuitry for
increased reliability, three selectable tone outputs for multiple line identification, two-line polarity indication for
fast outlet checks and selectable power outputs for use on open or shorted pairs.
• 77GX - Tone Generator
• 200GX - Inductive Amplifier
• Wire Identification with selectable tracing power and tone signatures
P/N
711K
711K
Description
Professional Tone/Probe Kit
JDSU TrueLength™ Cable Length Meter
Tempo AT8LK LAN Toner Kit
The TrueLength™ Cable Length Meter measures cable length and generates tone for electrical contractors, datacom
contractors and installers, and service provider technicians. It works on virtually any single or two conductor cable
and helps users find and repair existing cable problems or verify new installations quickly. TrueLength includes 12
pre-set and 12 user-programmable wire gauge settings and offers four selectable tones when in tone generation
mode. It measures resistance at 0 to 635 ohms and opens/capacitance 45pf to 0.082uf.
• Measures distance to opens or shorts
• Operation modes: AWG/mm/mm2, Telco, Network, Coax, Tone Generator, and Ohms
• Measures conductor length in feet or meters
P/N
CLM400
Description
TrueLength Cable Length Meter. Requires one 9-volt battery (not included)
test equipment catalog
TE3.8
Designed for the network installation and maintenance professional, the LAN Toner sends tone and blinks HUB,
Switch Port, and PC activity lights for fast identification. This kit can be used on any wiring system including
datacom, telecom, security/alarm, audio and CATV.
• Maintain and test HUB, switch Ports and PC activity
• Includes AT8L, 200GX and 700C case
• AT8L-LAN Toner 2
• 200GX - Multi-filter probe
CLM400
delivering products, knowledge, service and experience
P/N
AT8LK
Description
LAN Toner Kit
for more detailed information, visit our web site at
AT8LK
www.tvcinc.com
TE3.9
VoIP/Telecom Test
Tone & Probes
Tone & Probes
JDSU Tone Generator™
JDSU Resi-Toner™ Tone Generator
The compact, ergonomic Tone Generator offers several easy-to-use capabilities to conduct line tracings and ensure
proper signal path quality for data and voice installations. In addition to auto-off, multiple tone function, full talk
battery, and low battery indicator, the Tone Generator performs wire and cable identification without having to make
direct contact with a metallic conductor. Constant tone amplitude over the life of the battery means accurate and
traceable tones even at end of battery life. Two tone amplitude levels—normal and half—extend tone reach. Quickchange tips enable easier use in the field.
• Three distinctly different tones—one steady and two warbles—for multiple line testing selected from front panel
• Auto-off and no power draw in continuity mode for extended battery life
• Tone may be added in any mode—phone sets without a monitor feature can pick up tone
The Resi-Toner™is a full-function Toner Generator that performs test functions to help determine the quality of
connections on telephone systems and the performance of speakers. This easy-to-use tester is able to “power-up”
installed telephone lines under actual load conditions with simulated dial tone to check connectivity and proper
wiring configurations without requiring an actual service connection. Resi-Toner can test continuity and generate
three different tones, including a unique tone sequence for testing speaker installations by “popping” speakers
(either AC or DC coupled speaker types).
• POTS simulator for two-line phone system that checks for line voltage, line current, and dial tone
• Talk Battery mode of POTS simulator provides more current than a typical tone generator
• Multiple dial tones for each line, plus status indicators for off-hook and shorted
• Unbalanced tone for stronger signal on twisted pairs
• Speaker pop function identifies speaker connections
VoIP/TELECOM
P/N
TG101 KP101 TG101
Description
Tone Generator with angled bed-of-nails cord set. Includes 60.96 cm (2 ft) RJ11 to angled
bed-of-nails cord set, 19 cm (7.5 in) RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45
jacks, lanyard, and 9-volt battery
Tone Generator with angled bed-of-nails cord set and Tone Tracer Probe. Includes Tone
Generator, 60.96 cm (2 ft) RJ11 to angled bed-of-nails cord set, 19 cm (7.5 in) RJ12 to RJ12 cable
for no-fault connection to RJ11 or RJ45 jacks, Tone Tracer Probe, round and paddle-style tips,
lanyard, and pouch
P/N
TG400
KP309
Description
Resi-Toner Tone Generator. Includes molded alligator clips cord set, 19 cm (7.5 in) RJ12 to RJ12
cable for no-fault connection to RJ11 or RJ45 jacks (TP20), and 1.22m (4 ft) RJ11 to alligator
clips set (LB31B). Requires 9-volt battery (not included)
Includes Resi-Toner Tone Generator with molded alligator clips cord set (TG400), 19 cm (7.5 in)
RJ12 to RJ12 cable for no-fault connection to RJ11or RJ45 jacks (TP20), 1.22m (4 ft) RJ11 to
alligator clips set (LB31B), Resi-Tracer Probe (TT300), and round and paddle-style tips
VoIP/TELECOM
VoIP/Telecom Test
TG400
JDSU Turbo-Tone™ High-Powered Tone Generator
The high-power Turbo-Tone™ Tone Generator enables signal detection 20 miles away and makes hearing tone
through walls and enclosures easier with multiple tones and power levels suited for network, signal wire, coax, and
telephone cable applications. Four tone amplitude levels include normal and half plus, turbo normal and half, with the
half amplitude unbalanced for stronger signal effect on twisted pairs. In addition, depending on test requirements,
three distinctly different tones can be selected from the front panel.
• 700% more power than standard tone generators
• Unbalanced tone mode supports longer distances on UTP cables
• Constant amplitude output ensures no signal decrease as battery discharges
• Auto-off for battery conservation
• Full talk battery to power a dry line
P/N
TG201 KP105
TG201
The Tone Tracer is an ergonomic, high-sensitivity probe for field service professionals. Used in conjunction with any
Analog Tone Generator, the Tone Tracer identifies wire and cable without having to make direct metallic contact with
the conductor. The Tone Tracer can be used with a wearable headset or a standard cell phone headset.
• Ergonomic shape, balanced weight
• Volume control
• Recessed “on” switch
• Tip replacement without opening case
• Battery-low indicator
• Lanyard attachment point
Description
Turbo-Tone High-Power Tone Generator with angled bed-of-nails cord set. Includes 19 cm (7.5 in)
RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45 jacks, lanyard, and pouch requires
9-volt battery (not included)
Turbo-Tone High-Power Tone Generator Kit with alligator clips set and Tone Tracer Probe.
Includes Turbo-Tone High-Power Tone Generator with alligator clips set, 19 cm (7.5 in) RJ12 to
RJ12 cable for no-fault connection to RJ11 or RJ45 jacks, Tone Tracer Probe, round and
paddle-style tips, lanyard, and pouch
P/N
TT100
KP101 JDSU Latch-Test™ Security Alarm Tone Generator
The Latch-Test™ is a Tone Generator specifically designed for testing switched loops, thereby meeting tone
generator and continuity test needs for the security and alarm industry. Its combined tone generator and continuity
test functions create a constant output tone generator that is seamlessly integrated with a six mode continuity
tester. It delivers an accurate, easy-to-read status of a circuit’s continuity in real time and can perform a latch of the
occurrence of a selected event. The continuity indication can be both visual and audible (or visual only). Battery life is
maximized by low-power circuitry, regulated outputs, auto-off, and battery low indicator.
• Tone generator with two tone amplitude levels (normal and half)
• Half amplitude that is unbalanced for stronger signal on twisted pairs
• Three distinctly different tones easily selected from front panel
P/N
TG300 KP106 Description
Tone Tracer Probe. Includes round probe tip (TT30), paddle-style probe tip (TT35),
and 9-volt battery
Tone Generator with angled bed-of-nails cord set and Tone Tracer Probe. Includes Tone Tracer
Probe, round and paddle-style tips, lanyard, Tone Generator, 60.96 cm (2 ft) RJ11 to angled
bed-of-nails clip set, 19 cm (7.5 in) RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45
jacks, and pouch
TT100
JDSU Trace-Rite™
TG300
Description
Latch-Test Security/AlarmTone Generator. Includes molded alligator clips cord set, 19 cm (7.5 in)
RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45 jacks, lanyard, and pouch, requires
9-volt battery (not included)
Latch-Test Security/AlarmTone Generator with Tone Tracer Probe. Includes Latch-Test Security/
AlarmTone Generator with molded alligator clips cord set, 19 cm (7.5 in) RJ12 to RJ12 cable for
no-fault connection to RJ11 or RJ45 jacks, Tone Tracer Probe, lanyard, round and paddle-style
tips, and pouch
test equipment catalog
TE3.10
JDSU Tone Tracer
delivering products, knowledge, service and experience
The Trace-Rite™ is an ergonomic, powerful, and accurate Tracer with highly sensitive signal reading capabilities for
locating telco, network, and coax cable. With a built-in Tone Generator, two different tones, and auto-off feature, the
Trace-Rite is a reliable, easy-to-use tool that allows installers to easily find wires behind walls, floors, and ceilings.
• Built-in Tone Generator with two different tones, LED indicator, and auto-off feature
• Audible tone location indication
• Adjustable volume control
• Self-powered amplified probe with on/off button prevents battery drain
• Battery-low indicator with battery cap
• Changeable round-tip probe
P/N
TT250
KP260 TT250
Description
Trace-Rite Tone Generator and Probe. Includes RJ11 to alligator clips cord set and four 6-volt
button cell batteries
Trace-Rite Tone Generator and Probe with Net-Rite™ Cable Tester Kit. Includes Trace-Rite Tone
Generator and Probe, RJ11 to alligator clips cord set, and Net-Rite Cable Tester with onboard
cable test remote
for more detailed information, visit our web site at
www.tvcinc.com
TE3.11
VoIP/Telecom Test
VoIP/Telecom Test
Verification Test
Tone & Probes
Fluke Networks MicroScanner² Cable Verifier
The MicroScanner2 streamlines voice/data/video cable and service testing. Revolutionary user interface displays
available services (10/100/1000 Ethernet, POTS, PoE), cable length (with true TDR technology for finding distance to
shorts and opens), wiremap, cable ID, and distance to fault all on one screen. Test RJ11, RJ45, and Coax with no
adapters. Built-in IntelliTone digital and analog toning precisely locates virtually any cable or pair.
• Detects today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
The Pro3000 Tone and Probe Kit is the innovative analog tone and probe. Easily identify individual pairs with its
patented SmartTone™ technology (five different tones for exact pair identification). The large powerful speaker on
the probe allows you to hear through drywall, wood or other enclosures to find wires quickly and easily. Kit includes
pouch.
• Select solid or alternating tone options, indicated with solid or flashing LEDs
• Exclusive SmartTone™ technology can generate five separate analog tones when the pair is shorted
at the far end
• Works on de-energized AC wire, telephone/twisted pair wire, all voice and data category rated cable,
all coax cable, speaker wire and security wire
VoIP/TELECOM
P/N
26000900
26100900
26200900
26100103
26300000
Pro3000
Description
Pro3000 Analog Tone & Probe Kit
Pro3000 Analog Probe
Pro3000 Tone Generator
Pro3000 Analog Probe Replacement Tip (two per bag)
Earpiece for Pro3000/Pro2000 Probe
The IntelliTone Probe Digital and Analog Toner finds cables other toners/probes can’t. Speeds cable location with
advanced sensing modes. New SmartTone™ feature precisely locates individual wire pairs. Digital signal rejects
noise and safely tones active networks. Powerful troubleshooting capabilities include datacom link, two line telecom
service ID and twisted-pair cable wiremap.
• IntelliTone digital processing eliminates noise and false signals
• New SmartTone™ analog toning precisely isolates individual wire pairs
• Locates cables safely and effectively on active networks
MT-8200-60A
Description
IntelliTone Pro 200 Kit. Includes IntelliTone Pro 200 Toner and 200 Probe, coax F connector
adapter, two RJ11 and two RJ45 patch cables, test leads with alligator clips, lanyards, owners
CD and quick start guide, two 9 volt batteries
Triplett Fox 2 & Hound 3 Probe Kit
•
•
•
P/N
CIQ-100 CIQ-KIT CIQ-100
Description
CableIQ Qualification Tester. Includes CableIQ with remote adapter, CableIQ Reporter software
CD, (2) RJ45-RJ45 patch cord, USB cable, coax “F” push-on adapter, owners CD and quick start
guide, (4) AA batteries, soft carry case
CableIQ Advanced IT Kit. Includes CableIQ main unit with remote adapter, CableIQ Reporter
software CD, IntelliTone 200 Digital Probe, Remote IDs #2-7, (2) RJ45-RJ45 patch cord, USB
cable, coax “F” push-on adapter, 75-ohm coax patch cord, RJ45/11 universal coupler, RJ11-RJ11
patch cord, owners CD and quick start guide, (4) AA batteries, test accessory soft pouch, hard
carry case DTX-1800
DTX significantly reduces total time to certify by improving every aspect of testing. The DTX has 9-second Cat 6
Autotest, Level IV Accuracy, 900 MHz, intuitive diagnostics, on-board fiber modules, 12-hour battery life and fast
setup and reporting. AC Wiremap verifies cabling through Midspan PoE controllers.
• Exceeds spec requirements for Cat 5e/6/7 with superior Level IV accuracy
• Advanced time-saving diagnostics pinpoints fault and suggests corrective actions
Description
Fox 2 & Hound 3 Probe Kit
3399
Triplett The Fox Jr. & Hound Jr. Kit
•
•
•
•
•
•
Pocket-Sized with Pocket Clip
Overload Warning Beeper - alerts user to potential hazards
Connects easily with alligator clips or RJ-11 / RJ-45 combo plug
Distinctive warble tone is adjustable over wide range
120VAC Line Cross Resistant
Powered by one A23 Battery (included)
P/N
3375
test equipment catalog
CableIQ is the first qualification tool designed for network technicians who need to troubleshoot connectivity
problems and qualify cabling bandwidth. It determines if your cabling is qualified to support 10/100, VoIP or Gigabit
Ethernet.
• Troubleshoots why existing cabling plant can’t support the desired network bandwidth
• Discovers what’s at the end of any cable and displays device configuration (speed/duplex/pairing)
Fluke Networks DTX CableAnalyzer™
3375
TE3.12
MS2-KIT
Fluke Networks CableIQ™ Qualification Tester
Cable Analyzers
Fox 2 Deluxe Tone Generator
Hound 3 Probe Inductive Tracer
Cordura Carrying Case
P/N
3399
Description
MicroScanner2 Cable Verifier. Includes MicroScanner2 Cable Verifier with main wiremap adapter,
multi-language Getting Started Guide, user CD, batteries, and Fluke Networks carry pouch
MicroScanner2 Professional Kit. Includes MicroScanner2 Cable Verifier with main wiremap
adapter, remote identifiers #2-7, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord,
RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter, F Coax push on patch
cord, accessory soft pouch, (2) AA alkaline batteries, (1) 9V alkaline battery, MicroScanner2
Getting Started Guide, MicroScanner2 Owners CD, IntelliTone Pro Getting Started Guide,
MicroScanner2 owners CD, IntelliTone Pro Getting Started Guide, IntelliTone Pro owners CD,
packaged in a deluxe Fluke Networks carry case
Qualification Test
Fluke Networks IntelliTone™ Pro Toner and Probe
P/N
MT-8200-60A
P/N
MS2-100
MS2-KIT
MS2-100
VoIP/TELECOM
Fluke Networks Pro3000 Analog Tone and Probe
Description
Fox Jr. & Hound Jr. Kit
delivering products, knowledge, service and experience
P/N
Description
DTX-1800 CableAnalyzer. Includes DTX-1800 Main and Smart Remote, LinkWare PC Software, 128MB MMC
Card, Cat 6A/Class EA Permanent Link Adapters (2), Cat 6/Class E Channel Adapters (2),
Headsets for Talk (2), AC Chargers (2), Carrying Case, USB Interface Cable (Mini-B), Serial RS-232
Cable (DB9 to IEEE1394), User Manual
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Loop Testers
Fluke Networks 990DSL CopperPro™ Test Set
CopperPro offers a broad range of Plain Old Telephone Services (POTS) troubleshooting, fault location and line
qualification capabilities. Its Wideband/TDR option adds high frequency transmission testing and qualification
functions for services like ADSL, HDSL and HDSL2, ISDN, T1, E1 and DDS.
• Replaces up to twelve traditional test sets
• Troubleshoots and qualifies lines for POTS, ADSL and other special services
• Time Domain Reflectometer (TDR) feature allows precision fault location
P/N
990DSLWT 990DSLWT
Description
CopperPro Loop Tester with Wideband and TDR
for more detailed information, visit our web site at
www.tvcinc.com
TE3.13
VoIP/Telecom Test
Network/ethernet Test
Loop Testers
Network Testers
Fluke Networks CopperPro™ Series II Broadband Loop Tester
Fluke Networks NetTool Series II Inline Network Tester
CopperPro Series II is the latest generation of the leading copper loop test and analysis test sets. It provides a
complete range of troubleshooting, fault locating, testing and qualification capabilities, all in a rugged, handheld easyto-use DSL test set. New features include broadband noise identification for VDSL, advanced TDR capabilities for
locating short bridge taps and other VDSL affecting impairments, and an optional VDSL modem for verifying service
connectivity and performance.
• Quickly qualify the facilities for DSL services including ADSL, VDSL, HDSL, T1, and other special services
• Easily identify and locate possible problems to ensure reliable performance
• Install new services efficiently with fewer call-backs
The NetProve™ diagnostics isolates and documents network device and application connectivity issues in seconds.
Connect inline at 10/100Gig to see actual traffic between network and end devices to solve problems fast. Diagnose
IP phone problems and measure VoIP call quality. Troubleshoot PoE and network cabling.
• Verify, isolate, and document network connectivity and application port response problems faster than ever
before with automated NetProve diagnostics
• NetTool Series II is the only handheld troubleshooting tool with inline vision into 10, 100 and Gigabit links to see
the actual traffic between the network and end devices like PCs, access points and security cameras
• Internal wiremap - WireView Cable ID, cable length, opens, shorts, and split pairs
VoIP/TELECOM
P/N
NTS2-PRO
Description
CopperPro Next Gen Copper Loop Analyzer w/TDR & wideband spectral analysis for ADSL2+
EXFO AXS-200/610 - 30 MHz Copper Test Set
AXS-200/610
EXFO FTB-8105 Transport Blazer - DSn/PDH and SONET/SDH Electrical Test Module
FTB-8510
Supports DSn, PDH, SONET and SDH electrical rates up to 155 Mbit/s. Ideally suited for TDM field service
deployment and maintenance activities.
• Dual Rx DSn
• Intuitive, feature-rich user interface with automated test scripting with multi-user remote management
capabilities
GLVOCKIT
Greenlee GLVOCKIT
The GLVOCKIT is a Top Quality Professional Tool Kit with one part number for ordering ease.
• Kit contains tools and test equipment for installing CATV, VoIP, & Data Network
P/N
GLVOCKIT Kit Includes:
1143-5000
Sidekick, VOC
PE830
Test Set, Pocket Telephone-Pro
402K
CATV Tone Test Set (402K)
0151-09M
Pliers, side cutting 9” molded
0251-08AM
Pliers, diagonal, angle 8” molded
0153-33C
Screwdriver, Phillips #2x4”
0153-25C
Screwdriver, flat-cab 1/4x4”
0154-10C
Wrench, adjustable 12” composite
0158-13
Carrier, tool 11”
GT-16
Detector, voltage -adjustable
46040
Tur-tel 6 modular tester
0451-10M
Pliers, pump,10” molded
301A
Saw, keyhole (POP)
1951
Stripper
NC-500
Tester, Netcat Pro VDV wiring
NC-510
Remote unit kit (Netcat Pro)
0253-16C
Nut driver,7/16”x3” test equipment catalog
TE3.14
0652-11
45575
60807
0351-08SM
0156-12
46500
727M
921
333A
0155-16A
0354-15
438-2X
0358-11XL
PT-K01
0158-14
9753-13C
DM-20
The EtherScope™ Series II is a handheld Ethernet Analyzer combining essential tools to help first responders quickly
identify what and where the problem is so they can fix it fast. Troubleshoot 10, 100 and Gigabit links, copper and
optical fiber cabling wired and wireless LANs. Measure and characterize link performance at rates up to 1Gbps.
• The right combination of troubleshooting tools in a handheld platform to help network professionals solve a
wide range of problems fast
• Analyze 10/100/Gigabit twisted pair and Gigabit fiber optic Ethernet LANs, troubleshoot switched networks,
Discover devices, networks and VLANs and monitor traffic statistics
• Characterize the performance of LAN and WAN links. Measure throughput, latency and frame loss per RFC
2544 at rates up to 1 Gbps over copper or optical fiber cabling
P/N
ES2-PRO-SX/I
ES2-PRO-SX/I
Description
EtherScope Series II Network Assistant PRO-SX/I includes mainframe with LAN option,
802.11a/b/g adapter with WLAN option, SX SFP with Fiber option, ITO/RFC2544 option, external
directional antenna, rechargeable Li-Ion battery pack (installed), protective holster, carrying
strap, carrying case, AC adapter/battery charger, wire map remote (ID #1), RJ-45 coupler, patch
cable, 128MB CompactFlash® card and resource CD
JDSU LanScaper™ Network Tester
P/N
Description
FTB-8105
DSn/PDH and Sonet/SDH Electrical Test Module
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
VoIP Installer’s Tool Kit
NTS2-PRO
Fluke Networks EtherScope™ Series II Network Assistant
Identify copper problems affecting triple-play quality using the AXS-200/610—part of the SharpTESTER Access Line.
• Visual reports, graphs and histograms, displaying signal and noise issues
• 30MHz spectrum analysis for VDSL2 and video prequalification and troubleshooting
• Single-ended automated, clear, pass/fail test results speeding up and simplifying test cycles
• POTS and VF measurements for complete ADSL2+ and VDSL2 loop qualification
P/N
Description
AXS-200/610
30 MHz Copper Test Set
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Description
NetTool Series II Pro includes 10/100/1000Mbps inline, NetProve diagnostics, IntelliTone toning,
NetTool Connect PC software, WireView Wiremapper #1, set of 4 AA alkaline batteries, USB to
mini-USB cable, Ethernet cable, Getting Started Guide, CD with Multilanguage User Manuals,
and soft carrying case
NETWORK/ETHERNET
P/N
990DSL2+
990DSL2+
Knife, Utilty,HD
Crimper, mod plug-ratchet
Crimper, compression
Pliers, longnose 8” mold strip
Hammer, straight claw 16oz
Pocket-light
Cutter, cable
Quick change extension sys kit
Hacksaw (12”)
Rule, power return 16’
Wrench, combo ratcheting 1/2”
Fishtape,steel-1/4”x25’
Gloves, high dexterity-xl
Knife & scissors kit w/2 pocket pouch
Bag, zipper small
Opener, bottle cushion grip
DMM, 300V AC/DC
delivering products, knowledge, service and experience
The LanScaper™ is a Jack Identifier, Cable Tester, Length Measurement Device, and Ping Tester in one unit. The easyto-use LanScaper enables quick identification at unknown RJ45 jacks for active Ethernet, POTS, Token Ring, or other
devices. It pings network devices to verify connections and IP addresses, automatically accessing DHCP hosts to obtain
network information.
• Detects and reports speed and capabilities for active Ethernet and other devices up to 100 Mb/s
• Pinging function verifies connectivity to network devices
P/N
NT700
NT750
Description
LanScaper Cabling and Network Tester with cable test remote. Includes two 30.48 cm (1 ft) RJ45
to alligator clips cables, two 30.48 cm (1 ft) patch cables with RJ45 connectors, two 19 cm (7.5 in)
RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45 jacks, nylon case, and 9-volt battery
LanScaper Cabling and Network Tester Kit with 8 remote identifiers. Includes Tone Tracer Probe,
two 30.48 cm (1 ft) RJ45 to alligator clips cables, two 30.48 cm (1 ft) patch cables with RJ45
connectors, nine 19 cm (7.5 in) RJ12 to RJ12 cables for no-fault connection to RJ11or RJ45 jacks,
two RJ45 to coax F connector adapters, nylon case, and 9-volt battery
NT700
JDSU LanScaperPRO™ Network Tester
In network mode testing, the easy-to-use LanScaperPRO enables quick identification at unknown RJ45 jacks for active
Ethernet, POTS, token ring, or other devices as well as for presence of devices using power over Ethernet (PoE) at the
other end of the jack or cable being tested.
• Identifies and measures power delivered by IEEE 802.3af PoE and legacy Cisco In-Line Power
• Detects and reports speed and capabilities for active Ethernet and other devices up to 1 Gbps
P/N
NT800
NT850 Description
LanScaperPRO Cabling and Network Tester with cable test remote NT800. Includes 30.48 cm
(1 ft) RJ45 to alligator clips cable (TP40), two 30.48 cm (1 ft) cables with RJ45 connectors (TP55),
two 19 cm (7.5 in) RJ12 to RJ12 cables for no-fault connection to RJ11 or RJ45 jacks (TP20),
and nylon case. Requires four AA batteries (not included)
LanScaperPRO Cabling and Network Tester Kit with 8 cable test remotes and probe. Includes
30.48 cm (1 ft) RJ45 to alligator clips cable, two 30.48 cm (1 ft) cables with RJ45 connectors, two
19 cm (7.5 in) RJ12 to RJ12 cables for no-fault connection to RJ11 or RJ45 jacks, Tone Tracer Probe,
and nylon case. Requires four AA batteries (not included)
for more detailed information, visit our web site at
NT800
www.tvcinc.com
TE4.1
Network/ethernet Test
Network/ethernet Test
Network Testers
Carrier Ethernet Testers
EXFO FTB-8120NGE/8130NGE - Next-Generation Multiservice Test Modules
Fluke Networks MetroScope™ Service Provider Assistant
The FTB-8120NGE/8130NGE Power Blazer modules offer a wide range of SONET/SDH test functions ranging
from simple bit error rate (BER) testing to advanced characterization and troubleshooting procedures.
• DS0/E0 to OC-192/STM-64/OTU2; 10 Mbit/s to 10 Gbit/s LAN/WAN as well as 1x, 2x, 4x and 10x Fibre
Channel testing in a small form factor
• Fully integrated solution for assessing the performance of Ethernet transport networks, including
RFC 2544, BER testing and multistream generation analysis
• OTN forward error correction (FEC) and optical channel data unit (ODU) multiplex testing capabilities as
per ITU-T G.709
• Ethernet-over-SONET/SDH (EoS) testing via GFP, VCAT and LCAS software options
• Complete carrier Ethernet services portfolio: PBB-TE, MPLS and IPv4/6
The MetroScope Service Provider Assistant is the next generation in field test equipment for installing and
troubleshooting carrier Ethernet services over copper or fiber. Complete RFC 2544 testing plus jitter and server
response measurements support advanced services, while flexible scripting optimizes testing times. The unique
Reflector accessory allows end-to-end testing without a second MetroScope.
• Complete RFC 2544 Service Level Agreement (SLA) Testing
• Jitter and Server response time measurements
• Powerful customized scripting for optimized testing
P/N
Description
FTB-81xx
Next-Generation Multiservice Test Modules
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
P/N
MTSCOPE
MTSCOPE-KIT
FTB-8130NGE
Description
MetroScope Mainframe including 10/100/1000BASE-T and 1000BASE-X SFP Port,
AC adapter/battery charger, remote wiremap adapter, 128MB Compact-Flash card,
Documentation CD, carrying case
MetroScope Mainframe including 10/100/1000BASE-T and 1000BASE-X SFP Port, rechargeable
Li-Ion battery pack , AC adapter/battery charger, Auto lighter charger, remote wiremap adapter,
128MB Compact- Flash card, Documentation CD, carrying case and LinkReflector including
10/100/1000BASE-T port
MTSCOPE
JDSU Net-Rite™ Continuity and Wiremap Tester
EXFO AXS-200/850 Ethernet Test Set
The Net-Rite™ Cable Tester is an economical, compact Continuity and Wiremap Tester for Ethernet cable. The
ergonomic handheld unit is easy to use with no buttons to push to initiate testing. The auto-on feature starts the test
when a short or remote is detected. The removable onboard remote enables longer cable runs and enables testing
up to 305 meters (1,000 feet).
• Tests Ethernet cable for opens, shorts, split pairs, miswires, and reversals
• Shows cable faults per TIA568 specifications
• Displays test results on full LCD, including PASS and FAIL
• Onboard remote stores in the bottom of the main unit
• Auto-on when short or remote is sensed
TP250
• Auto-off when remote is disconnected
Delivers comprehensive, yet straightforward test functionalities for installing, turning up or maintaining
Ethernet and IP services.
• User-definable RFC 2544 test routines
• Bit-error-rate testing (BERT) up to layer 4
P/N
TP250
KP260 NETWORK/ETHERNET
NETWORK/ETHERNET
Network Wire Mappers
P/N
Description
AXS-850
Ethernet Test Set
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Description
Net-Rite Cable Tester with onboard cable test remote. Includes four 6-volt button cell batteries
Net-Rite Cable Tester with Trace-Rite™ Tone Generator. Includes Trace-Rite Tone Generator with
Probe, RJ11 to alligator clips cord set, and Net-Rite Cable Tester with onboard cable test remote
AXS-850
EXFO FTB-8510B Packet Blazer Ethernet Test Module
Delivers performance assurance for Ethernet-based services and tests connectivity in its native format. Ideal
for verifying service-level agreements (SLAs).
• Throughput, back-to-back, latency and frame loss measurements as per RFC 2544 (bidirectional)
• Complete carrier Ethernet services portfolio: PBB-TE (MAC-in-MAC), MPLS, 802.3ah and IPv4/6
• 1x and 2x Fibre Channel testing
FTB-8510B
P/N
Description
FTB-8510B
Ethernet Test Module
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Carrier Ethernet Testers
JDSU Validator™ and Validator-NT™ Ethernet System Speed Certifiers
The Validator™ series of Ethernet Network Management Tools - Validator™ and Validator-NT™- offer a complete
solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for
noise in the network, detecting faults in the cabling wiring, and ensuring that cables are able to support the speed
capabilities of active equipment.
• Conducts Bit Error Rate (BER) testing to speed certify Ethernet data transmission speed up to 1000BASE-T
(1 Gb/s)
• Measures Signal-to-Noise Ratio and Skew to uncover impairments to Ethernet data transmission
• Tests for opens, shorts, split pairs, miswires, and reversals and measures distance to opens and shorts supports all network, telco, and coax cables
• Identifies cable termination on active Ethernet ports with hub flash
•
P/N
NT950
NT955
Description
Validator Ethernet Speed Certifier Kit
Validator-NT Ethernet Speed Certifier and Active Network Tester Kit
test equipment catalog
TE4.2
EXFO FTB-8510G Packet Blazer -10 Gigabit Ethernet Test Module
NT950
delivering products, knowledge, service and experience
The FTB-8510G offers performance assurance for Ethernet-based frame services, supporting 10 Gigabit
Ethernet WAN and LAN rates for total network testing. Provides all the T&M functionalities required to verify
service-level agreement (SLA) conformity.
• LAN and WAN PHY capability in a single module
• Packet jitter measurement to qualify Ethernet transport networks for transmission of delay-sensitive
traffic such as video and voice-over-IP (VoIP)
• Throughput, back-to-back, latency and frame loss measurements as per RFC 2544 (bidirectional)
• EtherBERT™ test functionality for assessing the integrity of 10 Gigabit Ethernet running on WDM
networks
FTB-8510G
P/N
Description
FTB-8510G
10 Gigabit Ethernet Test Module
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
for more detailed information, visit our web site at
www.tvcinc.com
TE4.3
Network/ethernet Test
Electrical/voltage Test
Gigabit Ethernet Link Testers
Multimeters
Fluke Networks LinkRunner™ Pro Network Multimeter
Fluke 114 Electrical Multimeter
The Network Link Tester empowers technicians to resolve a broader range of today’s connectivity problems. It
verifies link at 10/100/Gig, pings up to 10 key devices, detects Power over Ethernet (PoE), resolves 802.1X security
conflicts, identifies nearest switch with CDP/EDP/LLDP discovery protocols, and generates professional link status
test reports to expedite trouble ticket resolution.
• Link at 10/100/Gig – identify device capabilities and confirm actual speed/duplex status
• Ping key devices – measure response of DHCP, router, DNS, and other devices or URLs
• Verify 802.1X settings – authenticate with EAP type, user name, certificates, and password
The Fluke 114 is a Compact True-RMS Meter for electrical troubleshooting. It is the troubleshooting tool for
“go/no-go” testing. It includes a feature to prevent false readings caused by ghost voltage.
• AutoVolt: automatic AC/DC voltage selection
• Large white LED backlight to work in poorly lit areas
• Resistance and continuity
• Min/Max/Average to record signal fluctuations
P/N
Fluke 114
Description
LinkRunner Pro Extended Test Kit
LinkRunner Pro Network Multimeter
The Fluke 77-IV Digital Multimeter has the features needed to repair most electrical and electronic problems. This
meter is simple to use and has significant improvements over Fluke’s original 70 Series with more measurement
functions, conformance to the latest safety standards, and a much larger display that’s easier to view.
• Wide 1000 V measurement range
• Average responding AC measurements
• 0.3% accuracy
• 10 Amps continuous (20A for 30 seconds)
• Frequency and capacitance
Fluke Networks 635 QuickBERT-T1
NETWORK/ETHERNET
Compact, handheld T1 Test Set for construction, installation and troubleshooting applications. Perfect for cell
backhaul applications
• Instantaneous detection and display of framing, line coding, errors, alarms, level, frequency and more
• Transmits and receives common Bit Error Rate Test (BERT) patterns and includes all common loop codes
• Compact, rugged and easy to use
635
Description
QuickBERT-TI, carrying case, ToolPak™, and necessary cables and adapters
P/N
Fluke 77 IV Wi-Net Wireless Testers
The Wi-Net Window™ captures and displays essential information regarding identity, functionality, and capability of
IEEE 802.11 b and g wireless devices. This Wireless Network Analyzer detects and connects to wireless equipment,
reports signal strength, pings Internet Protocol (IP) addresses, and identifies network components.
• Displays signal strength on LED and as a percentage on the LCD
• Actively scans and logs IEEE 802.11 wireless signal types b and g
• Detects networks with hidden SSIDs
WP150
P/N
Fluke 115
P/N
Fluke 179/TPAK Description
PC Cable-Check™ Pro
3240
New Flush Power Button reduces accidental turn-ons
Tests Cat 5, 5e & Cat 6 Cables
Identifies 1 of 16 Cables (with optional Remote Identifiers)
Tests 1/2, 3/6, 4/5, 7/8 Cable Pairs
2 - 7 segment LEDs display Fault Codes and Remote ID numbers
Description
Fluke 179 Multimeter & ToolPak™ Combo Kit
The Fluke 117 is a compact True-RMS Meter for commercial applications. It is the ideal meter for demanding settings
like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help
get the job done faster.
• VoltAlert™ technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection
Fluke 117
• True-RMS for accurate measurements on non-linear loads
P/N
Fluke 117
Description
PairMaster
test equipment catalog
TE4.4
Fluke 179
Fluke 117 Electrician’s Multimeter with Non-Contact Voltage
CAT 5, 5e
P/N
3240
Description
Multimeter. Includes Holster, Installed 9 V battery, 4 mm silicone test lead set, user manual
These two products are bundled together so they can be ordered with a single part number at a lower price than
purchasing the items separately. Now you can get more out of your Fluke 179 Digital Multimeter with the ToolPak
Magnetic Meter Hanging Kit.
• True-RMS AC voltage and current for accurate measurements on non linear loads
• Large digit display with analog bar graph
• Display backlight for work in dark areas
This Universal Tester maps cables, detects good connections, opens, shorts or crosses. It works with over 20 types
of cables including: LAN & telephone, Serial, coaxial, USB, VGA, Mini-USB, S-video, FireWire, PS/2 keyboard & parallel
printer.
• Instantaneous detection and display of framing, line coding, errors, alarms, level, frequency and more
• Transmits and receives common Bit Error Rate Test (BERT) patterns and includes all common loop codes
• Compact, rugged and easy to use
•
•
•
•
•
Fluke 115
Fluke 179 Multimeter & ToolPak™ Combo Kit
1577
Paladin Tools PC Cable-Check™ Pro
and 6 Testers
Triplett Pairmaster - LAN Cable Test Sets
Description
Digital Multimeter for field service or bench repair
The Fluke 115 is a compact True-RMS Meter for field service technicians. It is the solution for a wide variety of
electrical and electronic testing applications.
• Resistance, continuity, frequency, capacitance, and diode test
• Measures 10 A (20 A overload for 30 seconds)
• Compatible with optional magnetic hanger (ToolPak™)
• True-RMS for accurate measurements on non-linear loads
• Min/Max/Average with elapsed time to record signal fluctuations
Description
Wi-Net Window Wireless Network Analyzer. Requires 4 AA batteries (not included)
PinOut Testers
P/N
1577 Fluke 77 IV
Fluke 115 Field Service Technicians Multimeter
JDSU Wi-Net Window Wireless Tester
P/N
WP150
Description
Electrical Multimeter. Includes the following: Holster, Installed 9 V battery, Test leads and
User Manual
Fluke 77 IV Series Digital Multimeter
BERT Testers
P/N
635
Fluke 114
ELECTRICAL/VOLTAGE
P/N
LRPRO-KIT
LRPRO-1000
LRPRO-KIT
delivering products, knowledge, service and experience
Description
Electrician’s Multimeter with Non-Contact Voltage. Includes 4 mm silicone test lead set,
Holster, user manual
for more detailed information, visit our web site at
www.tvcinc.com
TE5.1
Electrical/voltage Test
Electrical/voltage Test
Multimeters
Multimeters
Trilithic XPro Digital MultiMeter
Amprobe 5XP-A Digital Multimeter Compact Full-Purpose
The XPro Digital Multimeter is designed and engineered for your daily use for electrical testing. Measure AC/DC
voltage, AC/DC Current, Resistance, Capacitance, Temperature, Frequency, Transistor, Diode and Continuity. The
multimeter features a convenient large LED screen with full icon display, data hold, sleep mode and full range
overload protection. The XPro Digital Multimeter comes complete with battery, test lead, point contact temperature
probe and multi-purpose socket.
• Overload Protection
• Data hold
• Sleep Mode
• Easy-to-read LCD
The 5XP-A Digital Multimeter provides superior features and accuracy in a smaller form factor. The 5XP-A has unique
features such as VolTect™ non-contact voltage detection and our exclusive Magne-Grip™ holster that frees both
hands for work. The 5XP-A is the right choice for residential, commercial and general troubleshooting applications.
• Display 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999
• Polarity Automatic, positive implied, negative polarity indication
• Operating Environment 0°C to 50°C at <70 % R.H.
• Stated accuracy at 23°C ± 5°C, <75 % relative humidity
5XP-A
P/N
5XP-A
Description
XPro Digital MultiMeter
Amprobe 37XR-A True RMS Digital Multimeter
Trilithic XPro Lite Palm-Size Digital Multimeter
The XPro Lite Digital Multimeter is an ideal tool for electrical maintenance. Measure AC/DC voltage, AC/DC Current,
Resistance, Temperature, Diode and Continuity. The multimeter features a convenient large LED screen and data hold
function. The XPro Lite Multimeter comes complete with battery, test lead, and point contact temperature probe.
• Data hold
• Easy-to-read LCD
P/N
2011331000
Description
XPro Lite Digital Multimeter
The 37XR-A is a true RMS Digital Multimeter with component and logic test for troubleshooting electronics at the
bench or on the job site.
• Backlight, True RMS with component and logic test
• Inductance to 40 H, frequency to 40 MHz, capacitance to 400μF, logic to 20 MHz
• Input warning tone when test leads are in wrong jack
• 10 Amps AC/DC, fully safety fused
XPro Lite
P/N
37XR-A
ELECTRICAL/VOLTAGE
Amprobe 15XP-A Digital Multimeter
The 15XP-A is a compact Digital Multimeter for electronics and test applications. The 15XP-A is the right choice for
electronics engineers, technicians and field service.
• 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999
• Automatic, positive implied, negative polarity indication
• (OL) or (-OL) is displayed
• Accuracy Stated accuracy at 23°C ± 5°C, <75% relative humidity
• Power Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
P/N
15XP-A
•
•
•
•
15XP-A
•
•
•
•
34XR-A
Description
True RMS Digital Multimeter
Amprobe 35XP-A Digital Multimeter
Description
Digital Multimeter
Autoranging for convenient operation, non-contact voltage detection, and to save time
Data hold to capture measurements
Auto power off and low battery indicator
RS-232 capable, may be connected to a PC for extended measurement capability with optional
optically isolated interface DMSC-2
P/N
DM-210
DM-210
Description
Digital Multimeter
Triplett 2030-C Autoranging, Pocket-Sized DMM
35XP-A
•
•
•
•
•
•
•
3 3/4 Digit, 4000 Count Display
Auto / Manual Ranging
AC/DC Volts to 600V
AC/DC Current to 400mA
Resistance to 40MΩ
Capacitance Test to 100μF
Frequency Range to 10KHz
P/N
2030-C
Description
Digital Multimeter
test equipment catalog
TE5.2
DM-820
Greenlee DM-210 Digital Multimeter
The 34XR-A is a True RMS Digital Multimeter with temperature and backlight for contractors and field service
technicians.
• Autoranging; Display: 3-3/4 digit LCD, 3999 counts with 41-segment analog bar graph
• Display Update Rate: 2/sec, nominal
• Operating Temperature: 0°C to 45°C at < 70% R.H
• True RMS digital multimeter with temperature and backlight
• Overrange indication
P/N
35XP-A
Description
True RMS Digital Multimeter
Autoranging, 3-5/6-digit, 5000-count display for greater accuracy
Frequency and capacitance measurements plus diode and continuity tests standard
Data hold to capture measurements
RS-232 capable, may be connected to a PC for extended measurement capability with optional
optically-isolated interface DMSC-8L, purchased separately
P/N
DM-820 Description
Digital Multimeter
The 35XP-A is a compact, full-featured Digital Multimeter for plant maintenance, HVAC, electrical and electronic
applications.
• Temperature measurement capability to 1000°C/1832°F (Type K thermocouple included)
• 750 V AC/1000 V DC - highest voltage rating in this class of meter
• Capacitance for motor run/start test
• 0.1 μA resolution for flame sensor testing
• Frequency to 1 MHz
• Resistance to 40 MΩ
37XR-A
Greenlee DM-820 Digital Multimeter
Amprobe 34XR-A True RMS Digital Multimeter
P/N
34XR-A
Description
Digital Multimeter Compact Full-Purpose
ELECTRICAL/VOLTAGE
P/N
2011332000
XPro
delivering products, knowledge, service and experience
2030-C
Description
Autoranging, Pocket-Sized DMM
for more detailed information, visit our web site at
www.tvcinc.com
TE5.3
Electrical/voltage Test
Electrical/voltage Test
Multimeters
Clamp-On Multimeters
Triplett Model 310
Fluke 330 Series Clamp Meters
•
•
•
•
•
•
With the striking design of the Fluke 330 Series Clamp Meters, we’ve taken a new look at the way you make current
measurements, at how you use your tools, and how to get the results you need, faster and more conveniently. The
result is a new, ergonomic concept, shaped to fit your hand and to access tight spots easily.
P/N
Description
Fluke 333
Rugged reliability at a basic price, measures AC amps, AC/DC volts and ohms
Fluke 334
Large display with backlight, measures AC amps, AC/DC volts, ohms and motor start-up current
Fluke 335
True-RMS clamp meter, large backlit display, measures AC amps, AC/DC volts, ohms and motor
start-up current
Fluke 336
True-RMS clamp meter that measures AC/DC current and voltage, ohms, motor start-up current
with large display and backlight
Fluke 337
Top-of the-line True-RMS clamp meter, large jaw measures AC/DC current and voltage, ohms,
motor start-up current (in-rush), frequency, MIN/MAX capability and a large backlit display
All models include: Coated instruction card, Safety information sheet, Soft carrying case, TL75 test leads, Two AA Alkaline batteries.
P/N
3018
310
Description
Model 310
Triplett Model 9045 True RMS Digital Multimeter with Temperature, Capacitance & Frequency
•
•
•
•
•
•
6000 Count Display
DC Voltage Ranges to 1000V, AC Voltage Ranges to 750V
AC/DC Current Ranges to 10A
Resistance Ranges from 600Ω to 60MΩ
Capacitance Ranges from 40nF to 4000μF
Frequency Ranges from 9.999Hz to 9.999MHz
P/N
9045
9045
ELECTRICAL/VOLTAGE
P/N
ACD-10 TRMS-PLUS
Triplett Model 1101-A Compact DMM with Backlit Display & Temperature Test
•
•
•
•
•
•
3 1/2 Digit, w/ 1999 max reading
Backlit Display
AC/DC Voltage to 500V
AC/DC Current to 10A
Temperature Test (Probe Included)
Resistance to 20MΩ
P/N
1101
Amprobe ACD-10 TRMS-PLUS 600A Clamp-On Multimeter
The ACD-10 TRMS-PLUS Meter offers thinner jaws over standard clamp meters. Allowing access to tight
measurement areas and still accommodating conductors up to 25 mm. Both meters also measure Capacitance
and Frequency. Frequency is measured by either jaws or test leads. True RMS version for noisy measurement
environments for a more accurate reading.
• AC & DC Voltage to 600V
• AC Current to 600A
• Resistance to 40MΩ
Description
Model 9045
337
ACD-10 TRMS-PLUS
Description
600A Clamp-On Multimeter TRMS
ELECTRICAL/VOLTAGE
18 Ranges and Functions
AC/DC Voltage to 1200V
DC Current to 0.6A
Resistance to 20MΩ
Drop Resistant, High-Impact Case
Diode Overload Protected Meter
Amprobe ACDC-100 Digital Clamp-on Multimeter
The ACDC-100 offers superior AC/DC measurement capabilities, highest product quality and enhanced
ergonomics with Red, Rubber, Ribs™ design. The TRMS version addresses needs of professionals who rely
on performance and reliability.
• Large, easy to read LCD display
• Auto and manual ranging
• Relative zero mode
1101-A
Description
Model 1101-A
ACDC-100
P/N
Description
ACDC-100
AC/DC Digital Clamp-on
Triplett Model 9015-A Digital Multimeter with Temperature & Capacitance
•
•
•
•
•
•
3 1/2 Digit, 1999 max reading
DC Voltage to 1000V, AC Voltage to 750V
AC/DC Current to 10A
Resistance to 200MΩ
Temperature Test (Probe Included)
Capacitance Test (Extension Lead Included)
P/N
9015
9015-A
Amprobe ACD-15 TRMS PRO 2000A Digital Clamp-on Multimeter
The ACD-15 TRMS offers a wide range of measuring features built into one, professional meter. The TRMS version
with backlight display, improves performance and reliability.
• TRMS & Backlight Screen
• Non-contact Voltage Level Detection
• Diode Test
• Audible continuity
Description
Model 9015-A
P/N
ACD-15 TRMS PRO
ACD-15 TRMS PRO
Description
2000A Digital Clamp-on Multimeter TRMS
Triplett Model 9005-A Digital Multimeter
•
•
•
•
•
•
3 1/2 Digit, 1999 max reading
DC Voltage to 1000V, AC Voltage to 750V
AC/DC Current to 10A
Resistance to 200MΩ
Manual Range Selection
Data Hold
P/N
9005
9005-A
Description
Model 9005-A
test equipment catalog
TE5.4
Greenlee True RMS Clamp Meter
•
•
•
•
•
•
AC amperage, AC/DC voltage measurement
True RMS for the most accurate measurement where harmonics are present
Resistance measurement
Audible continuity test
Auto power off for longer battery life.
Data hold to capture measurements
P/N
CM-450 delivering products, knowledge, service and experience
CM-450
Description
AC Clamp-on Meter, True RMS
for more detailed information, visit our web site at
www.tvcinc.com
TE5.5
Electrical/voltage Test
Electrical/voltage Test
Clamp-On Multimeters
Voltage Detectors
Triplett Model 9200 Mini AC Clamp-On Meter
Greenlee Non-Contact Voltage Detector
•
•
•
•
•
•
•
•
•
•
Economical, Compact AC Current Clamp-on
Simple, One Button Operation
Measures from 0 to 200 Amps AC in Two Ranges
Large, 3 3/4 Digit, 4000 Count Display
Autoranging
Overload Indication (@ 400A)
P/N
9200
9200
Description
Model 9200
Description
Non-Contact Voltage Detector. Voltage Detection: AC V 50-1000; Frequency: 50-500Hz;
Measurement Category: Cat IV, 1000V
AC/DC voltage and polarity measurement LCD and dual color LEDs for convenience. Selectable SHAKER feature
when measuring AC voltage. Overvoltage warning gives user visual notification that voltage levels have exceeded
1000V AC/ 380V DC. Auto-hold automatically activates when tester is removed from voltage reading. Continuity test
and single probe detection of live conductors for added flexibility. Safe, non-contact voltage detection GFCI test
capability eliminates the need for additional testers. Visual and audible continuity.
• AC/DC Voltage and polarity measurement
• Continuity test and single probe detection of live conductors for added flexibility
9320-A
3 3/4 LCD with max. reading of 3999
CAT III 600V
True RMS Measurements (45Hz to 1KHz)
AC/DC Current Measurement to 1000A
AC/DC Voltage Measurement to 600V
Resistance Measurement to 40MΩ
Temperature from -4° to 1472° F
P/N
9320
P/N
GT-11
GT-11
Greenlee Voltage Tester
Triplett Model 9320-A True RMS AC/DC Clamp-On Meter
•
•
•
•
•
•
•
Fast, easy, non-contact voltage detection
Bright LED and audible alarm if voltage is present
On/Off switch for longer battery life
Use to detect the presence of voltage at outlets, lighting fixtures, circuit breakers, wires and cables or to find a
break in a wire
P/N
GT-95
Description
Model 9320-A
GT-95
Description
Voltage Tester. Voltage Detection: 19 to 1000 VAC, 5 to 1000 VDC; Frequency: 0 to 70 Hz;
GFCI:7.5 mA at 120 VAC, +/- 10%; Measurement Category: CAT IV, 600 V; CAT III, 1000 V
ELECTRICAL/VOLTAGE
Voltage Detectors
Fluke Networks Voltage Detector
•
•
•
•
C9973
Hassle-free automatic measurement of amperage, voltage and resistance
Compact design for measuring in tight spaces
400A AC, 600V AC/DC measurement
Data hold to capture important readings
This Voltage Detector detects AC and DC voltages through a long-life carbide tip, which is protected by a
plastic cap when not in use. To use the Voltage Detector, you simply place the carbide tip on the object in
question, press the magnetic trigger, and observe the LEDs. If the green LED illuminates, the surface being
touched is free from electrical hazards. If the red LED flashes, dangerous voltage is present.
P/N
CMT-80
P/N
C9973 C9974 Triplett Sniff-It Non-Contact, AC Voltage Detector
Description
Voltage Detector Kit Includes Voltage Detector, probe cap, storage bag, temporary bond,
ground cord and handbook.
Voltage Detector Kit with Test Plug
•
•
•
•
•
The next generation VoltAlert™ AC non-contact Voltage Testers from Fluke are easy to use — just touch the
tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s
voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for
energized circuits in the workplace or at home.
P/N
Fluke 1AC A1 II 1AC A1 II
T5-600
The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the
T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets
you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the
tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized
for national electrical standards. The test leads accept optional accessories such as clips and specialty
probes. Available in 600V and 1000V models.
P/N
Description
Fluke T5-1000
1000V Voltage, Continuity and Current Tester
Fluke T5-600
600V Voltage, Continuity and Current Tester
All models include: 4 mm detachable probes, Instruction sheet.
test equipment catalog
TE5.6
Description
Electrical Tester. 400A; DC V: 1.8-600.0; -0.6 to -600.0V; Resistance: 2000Ω with continuity
beeper; Display: 6000-count; LCD Jaw Opening: 1.06
9600
Description
Model 9600 Sniff-It Rev A
9601
Triplett Sniff-It 2 Non-Contact, AC Voltage Detector with Adjustable Sensitivity Control
Description
AC Voltage Detector 90-1000V, ENGL/LASPN/CFR Flat-tip
Fluke T5 Voltage, Continuity and Current Testers
CMT-80
Ergonomic Design
Detects AC Voltage without making contact
Sensitivity from 30 to 600 Volts AC
Light flashes & beeper chirps when AC voltage is present
Beep Rate Indicates the Magnitude of Voltage (low or high voltage)
P/N
9600
Fluke 1AC A1 II VoltAlert
ELECTRICAL/VOLTAGE
Greenlee Electrical Tester - 400amp
•
•
•
•
Detects AC Voltage without making contact
Variable Sensitivity, from 5 to 600 Volts AC
Light flashes & beeper chirps when AC voltage is present
Flashes & Beeps faster as AC voltage is approached
P/N
9601
FVD/FVDP
Telco Sales, Inc. Voltage Detector with Leather Pouch
The Voltage Detector tests for potentially hazardous AC voltage that may be encountered by communications
technicians.
P/N
FVD/FVDP
delivering products, knowledge, service and experience
9601
Description
Model 9601 Sniff-It 2
Description
Voltage Detector with Leather Pouch
for more detailed information, visit our web site at
www.tvcinc.com
TE5.7
Electrical/voltage Test
Satellite test
Satellite Test
Ground Loop Testers
Trilithic XFTP SAT-2150 Satellite Meter
Fluke 1630 Earth Ground Clamp Meter
The clamp-on ground testing technique used by the Fluke 1630 Clamp Meter simplifies ground loop testing and
enables non-intrusive leakage current measurement. The compact and rugged design makes the Fluke 1630 easy
to use in small places and harsh environments, while the ‘display hold’ and the continuity testing with an audible
alarm function ensures convenience in use. The novel technique means that earth ground loop testing and continuity
testing can be completed without breaking the circuit.
P/N
Fluke 1630 The XFTP SAT-2150 Meter makes satellite installation and alignment simple and fast. Perfect for installers and
contractors, this satellite meter provides self-calculated azimuth, elevation and polarization for initial dish setup,
signal level tuning and measures digital satellite signal, BER and C/N quickly to confirm a quality signal.
• Displays Dish Orientation (Az, El, Po)
• Simultaneous Display of Signal Strength and Quality of Signal
• QPSK Signal Level, C/N and BER Measurements
• C & K Band
1630
Description
Earth Ground Clamp Meter. Includes Rugged carrying case with shoulder strap, Resistance test
loop, 9 V battery, User’s manual in English, French, Spanish, German, Italian, Portuguese, and
Simplified Chinese
P/N
201175000
SAT-2150
Description
XFTP SAT-2150 Satellite Meter
Trilithic XFTP SAT LITE Satellite Meter
The XFTP SAT LITE Meter makes satellite installation and alignment simple and fast. Perfect for installers and
contractors, this satellite meter provides signal level and signal quality tuning for easy dish alignment and measures
digital satellite BER and C/N quickly to confirm a quality signal.
• Simultaneous Display of Signal Strength and Quality of Signal
• QPSK C/N and BER Measurements
• C & K Band
Ground Fault Circuit Testers
For use on 110~125 VAC receptacles
Detects common wiring problems in standard and Ground Fault Circuit Interrupter (GFCI) outlets
To test, simply plug into receptacle and observe the light pattern
Push the yellow button to test operation of ground fault receptacle
GFCI “Test in Progress” LED Indicator
P/N
9610 Description
XFTP SAT LITE Satellite Meter Satellite Meter
Sencore DSA 1471 Digital Satellite Analyzer
The DSA 1471 Digital Satellite Analyzer is specifically designed to meet the requirements of satellite installers
and operators who need to quickly adapt to rapidly changing digital satellite technology as well as new LNBs
with SCR (Single Cable Router) technology. The DSA 1471 allows engineers and technicians to quickly and
accurately align and troubleshoot issues using its easy-to-use “Sat Finder” technology.
• Complete tuning capabilities from 930 MHz to 2.25 GHz for testing any digital or analog satellite signal
• The DSA 1471 will tune to C-band, KU-band and KA-BAND
• Fully demodulated QPSK, SCPC, and MCPC signals to fit a wide range of applications
DSA 1471
Description
Plug-Bug 2 GFCI Receptacle Tester
Circuit Breaker Locators
P/N
DSA 1471 Description
Digital Satellite Analyzer
SATELLITE
ELECTRICAL/VOLTAGE
•
•
•
•
•
P/N
201185001
9610
Triplett Plug-Bug 2
SAT LITE
Triplett Breaker Sniff-It Digital Circuit Breaker Locator
•
•
•
•
•
•
•
Micro-Processor Controlled - Reduces False Readings
Fully Automatic - No Adjustments Necessary
120/220 VAC Transmitter (250 VAC Max)
Audible & Visual Indication
Auto Power Off Battery Saver
Uses 1 standard 9-Volt Alkaline Battery (not included)
P/N
9650
9650
JDSU Satellite Signal Strength Meter
The Satellite Signal Strength Meter is a simple, easy-to-use mechanical device used to maximize a satellite
signal between the low noise block (LNB) amplifier and the receiver.
• Rugged ABS body
• Easy-to-read analog display
• Frequency range: 950–2,050 MHz
• Variable attenuator for ultra-fine tuning capability
• Powered by satellite receiver—no batteries required
Description
Model 9650 Breaker Sniff-It
P/N
CS300
Description
Satellite Signal Strength Meter
CS300
Battery Testers
Triplett Chek-A-Cell Sealed Lead Acid Battery Tester
An affordable way to quickly and accurately measure the voltage of Sealed Lead Acid Batteries.
• Load Tests 6 and 12 volt sealed lead acid batteries
• Works for batteries from 1 to 10 Amp Hours
• Measures within 0.01 volts
• Economical and Easy to Use
• Polarity Reversal Indication and Protection
P/N
3276
Description
Chek-A-Cell
test equipment catalog
TE5.8
3276
Triplett SatAlign 2
•
•
•
•
•
•
Analog Meter for Easy Readout
Audible Tone Changes Pitch with Signal Strength
Fast Response Speeds Adjustment
Expanded Scale Meter for Precise Alignment
950MHz to 2050MHz Operation
Sensitive MMIC Meter Amplifier
P/N
3275
delivering products, knowledge, service and experience
Description
SatAlign 2 Digital Satellite Signal Strength Meter with Tone
for more detailed information, visit our web site at
3275
www.tvcinc.com
TE6.1
Fiber Optic Splicers
Fiber Optic Splicers
Splicers
Splicers
AFL FSM-60S Fusion Splicer
AFL FSM-60R12 Fusion Splicer
The FSM-60S Fusion Splicer sets the standard for core alignment fusion splicing by incorporating a userfriendly interface with enhanced features to provide a rugged and reliable Fusion Splicer. The new rugged
construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30” drop test.
• Rugged construction providing shock, dust and moisture resistance
• Dual monitor position with automatic image orientation
• Automatic arc calibration and fiber identification
• User-selectable fiber clamping method – sheath clamp or fiber holders
• 2 year manufacturer’s warranty
• Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
The FSM-60R12 Fusion Splicer offers versatility and reliability. The new ribbon splicer withstands a drop test
of up to 30” and continues to splice. And enhanced, robust features enable the FSM-60R12 to resist shock,
dust, and rain so that unfortunate environmental conditions do not negatively impact productivity.
• Rugged construction providing shock, dust and moisture resistance
• Dual monitor position with automatic image orientation
• Automatic arc calibration and ribbon fiber identification
• Auto-start tube heater
• Simultaneous battery charge and splicer operation
• Long life battery (up to 90 splice/heat cycles per charge)
P/N
S014532
S014562
FSM-60S
Description
FSM-60S Fusion Splicer Kit (with cleaver). Includes CT30A Cleaver, ADC-13 AC Adapter,
ACC-14 AC Cord, Spare Electrodes (pair), Sheath Clamp, USB Cable, Splicer Carrying
Strap, Quick Reference Guide, Video Instruction Manual, JP-05 Splice Sleeve Cooling Tray,
and Transit Case with Carrying Strap
FSM-60S Fusion Splicer Kit (with cleaver, battery and cord). Includes BTR-08 Battery,
DCC-14 Battery Charge Cord, CT30A Cleaver, ADC-13 AC Adapter, ACC-14 AC Cord, Spare
Electrodes (pair), Sheath Clamp, USB Cable, Splicer Carrying Strap, Quick Reference
Guide, Video Instruction Manual, JP-05 Splice Sleeve Cooling Tray, and Transit Case with
Carrying Strap
P/N
S014534
S014563
Description
FSM-60R12 Fusion Splicer Kit (with cleaver and stripper). Includes CT-30 Cleaver, HJS-02
Hot Jacket Stripper, FH-50-12 Fiber Holders (pair), ADC-13 AC Adapter, ACC-14 AC Cord,
Magnifier, JP-05 Splice Sleeve Cooling Tray, USB Cable, Splicer Carrying Strap, Spare
Electrodes (pair), Quick Reference Guide, Video Instruction Manual, and Transit Case with
Carrying Strap
FSM-60R12 Fusion Splicer Kit (with cleaver, stripper, battery and cord). Includes CT-30
Cleaver, HJS-02 Hot Jacket Stripper, FH-50-12 Fiber Holders (pair), BTR-08 Battery, DCC-14
Battery Charge Cord, ADC-13 AC Adapter, ACC-14 AC Cord, Magnifier, JP-05 Splice Sleeve
Cooling Tray, USB Cable, Splicer Carrying Strap, Spare Electrodes (pair), Quick Reference
Guide, Video Instruction Manual, and Transit Case with Carrying Strap
FSM-60R12
AFL FSM-18S Fusion Splicer
FIBER OPTIC SPLICERS
P/N
S014528
S014560
Corning OptiSplice® M90e Fusion Splicer
FSM-18S
The M90e Fusion Splicer offers two core-alignment technologies, the LID-SYSTEM™ and the Core Detection
System (CDS). The LID-SYSTEM has advanced technology available for splicing 250 micron Single-mode
fibers, providing a splice loss measurement after the splice is completed. Alternately, the camera-based CDS
system is optimized for speed and versatility, working with either 250 or 900 micron coated fibers and with
bend-insensitive fibers such as Corning® ClearCurve™ fiber. The M90e provides an advanced set of features,
yielding precise performance while reducing training and maintenance costs, all in a compact, user-friendly
fusion splicer.
• Long-haul, CATV, telco and LAN applications
• Accurately splices current, legacy, dissimilar and specialty fiber types
• Splices 900 μm pigtails utilizing three-dimensional core alignment technology – the core detection
system (CDS) mode
Description
FSM-18S Fusion Splicer Kit (with cleaver). Includes. CT30A Cleaver, ADC-13 AC Adapter,
ACC-14 AC Cord, Spare Electrodes (pair), Sheath Clamp, USB Cable, Splicer Carrying
Strap, Quick Reference Guide, Video Instruction Manual, JP-05 Splice Sleeve Cooling Tray,
and Transit Case with Carrying Strap
FSM-18S Fusion Splicer Kit (with cleaver, battery and cord). Includes BTR-08 Battery,
DCC-14 Battery Charge Cord, CT30A Cleaver, ADC-13 AC Adapter, ACC-14 AC Cord, Spare
Electrodes (pair), Sheath Clamp, USB Cable, Splicer Carrying Strap, Quick Reference
Guide, Video Instruction Manual, JP-05 Splice Sleeve Cooling Tray, and Transit Case with
Carrying Strap
P/N
M90e-0SM-T-H
Description
OptiSplice® M90e Fusion Splicer with FBC-006 cleaver, carrying case with wheels, fast
heat-shrink oven, splice tray holder, AC power supply w/US cord, Li-Ion battery with
external charger, 1-year limited warranty, operators manual on CD, USB worklight,
maintenance tool kit
Corning OptiSplice® CDS Fusion Splicer
AFL SpliceMate™ FSM-11S Fusion Splicer
SpliceMate (FSM-11) is a small and portable Fusion Splicer designed to meet the challenges posed by today’s
fiber networks. SpliceMate fits in the palm of your hand, yet it’s smart and reliable enough to be used with
confidence by inexperienced operators.
• Highly portable
• Dual camera inspection
• 3.5” dual direction monitor
• 40-second tube heater
• Auto arc calibration
The OptiSplice CDS Fusion Splicer offers the speed and versatility of a video-camera-based core-alignment
technology known as the core detection system (CDS). The CDS system works on both 250 and 900 micron
fibers and offers a fast total splice cycle time for a core-alignment fusion splicer. The OptiSplice CDS provides
an advanced set of features, yielding precise performance while reducing training and maintenance costs, all
in a compact, user-friendly fusion splicer.
• Touch screen with graphical user interface
• Built-in interactive training videos
• 3-axis core-alignment by the CDS system
P/N
S013988
P/N
OSCDS-0SM-T-H
Description
FSM-11S Fusion Splicer Kit with Cleaver. Includes FSM-11S Fusion Splicer, CT-30 Cleaver,
FH-50-250 Fiber Holders, BTC-04 Battery Charger, BTR-07 Battery, ADC-10 Adapter (for
BTC-04), ACC-09 Power Cord (for ADC-10), Spare Electrodes (Pair), Operation Manual,
Transit Case
test equipment catalog
TE7.1
M90e-OSM-T-H
FIBER OPTIC SPLICERS
The FSM-18S Fusion Splicer is a low cost, fixed V-groove, single fiber Fusion Splicer with the same robust
features offered in other high end models. The new rugged construction adds improved reliability by resisting
shock, dust, and rain, and withstands a 30” drop test.
• Rugged construction providing shock, dust and moisture resistance
• Dual monitor position with automatic image orientation
• Automatic arc calibration
• User-selectable fiber clamping method – sheath clamp or fiber holders
• Long life battery (up to 150 splice/heat cycles per charge)
• Green friendly – RoHS & WEEE compliant
FSM-11S
delivering products, knowledge, service and experience
Description
OptiSplice® CDS Fusion Splicer with FBC-006 cleaver, carrying case with wheels, fast
heat-shrink oven, splice tray holder, AC power supply w/US cord, Li-Ion battery with
external charger, 1-year limited warranty, operator’s manual on CD, USB worklight,
maintenance tool kit
for more detailed information, visit our web site at
OSCDS-OSM-T-H
www.tvcinc.com
TE7.2
Fiber Optic Splicers
Fiber Optic Splicers
Splicers
Cleavers
Corning OptiSplice® One Fusion Splicer
AFL CT-30 Series Fiber Cleavers
The OptiSplice One Handheld Fusion Splicer is a durable, reliable and affordable splicer for restoration and
installation of Enterprise, Telco, CATV and FTTx networks with single fibers. This innovative tool features an
intuitive user interface for easy menu navigation and dual cameras provide a clear view of the fibers, allowing
for a splice loss estimate of the completed splice.
• Graphical user interface
• Ergonomic layout
The CT-30 Cleaver sets the standard for portability, reliability and ease of use. Available for either single
fiber or ribbon splicing (up to 12 fiber ribbons) applications, the CT-30 Cleavers are compatible with all AFL
Telecommunications fusion splicers. Designed for excellent portability, the CT-30 is equally at home in a splicing
van or in a bucket truck and is ideal for FTTx applications. The 16-position blade yields 48,000 single-fiber cleaves,
or 4,000 12-fiber ribbon cleaves before requiring replacement, and the built-in scrap collector conveniently stores
fiber shards until they can be safely discarded.
P/N
OS1-0SM-T-H
P/N
S014076
S014080
®
Description
OptiSplice® One Handheld Fusion Splicer with cleaver, 1 set of 250 µm handlers, fast
heat-shrink oven, carrying case, 1 Li-Ion battery, external battery charger, AC power supply
with US cord, operator’s manual (English), detachable splice tray holder/screen cover and
1-year limited warranty
Fitel S315 Field Cleaver
The S315’s small, lightweight size makes it the perfect addition to any field splicing system. In addition, the
unit’s graduated scale allows for cleave lengths of 5 to 20 mm. Designed to accommodate 250µm and 900µm
coating diameters, the S315 is FITEL’s least expensive cleaver model.
The S315 field cleaver requires some skill to achieve the desired cleave angle so it may not be appropriate for
some splicing applications.
The OptiSplice® Ribbon Handheld Fusion Splicer is a sturdy and reliable high-performance splicer for
restoration and installation of ribbon cable with 2-, 4-, 6-, 8-, or 12-fiber ribbons or single fibers. This innovative
tool features a graphical user interface (GUI) for easy menu navigation. Dual cameras provide a clear view of
the fibers and allow for a splice loss estimate of the completed splice.
• Telco, CATV and FTTx networks
• Restoration and installation of ribbon cable
• Locations with limited workspace
Description
For cleaving 5 to 20 mm length adjusting with scale
Fitel S325A One-Step Precision Cleaver
OSR-0SM-T-H
This compact unit delivers speed and precision. With a single button, you complete a secure cleave and the
waste fiber is automatically collected. Excellent for hand-held and work bench use. Performs 32,000 cleaves.
• One-step action
• Easy fiber loading, all fiber types, single to 12-fiber ribbon
• Simple operation for all technicians
• High capacity waste fiber collection
P/N
S325A FIBER OPTIC SPLICERS
With its super low profile and new user interface, the 122 Series Fusion Splicer offers next generation
workability for every splicing field: FTTx, LAN, backbone or long-haul installations. Combining the portability,
power flexibility and field ruggedness of FITEL’s previous generation hand-held units with its proven highquality ribbon splicing capabilities, the S122 delivers fast and consistent splicing with outstanding mobility
and extreme ease-of-use. The S122A is designed for single fiber using a fiber holder system.
• 40% reduction in weight (1.85 lbs. w/battery)
• 40% larger LCD screen viewable in direct sunlight
• New GUI interface, intuitive icons & function keys
Description
Kit Includes S122A Splicer, Strap, Soft Carrying Case, Fiber Stripper, One-Action Precision
Cleaver, 900um Fiber Holders (Pair), Li-ion Battery, AC Adapter, Battery Recharger,
Electrodes (Pair), Electrode Cleaning Disk, Fiber Preparation Fluid, Fiber Wipes, Manual
Description
One Step Precision Cleaver. Includes S325A Cleaver Main Body, Soft Carrying Case,
Normal Fiber Waste Bin, Single Fiber Adapter, Large Capacity Fiber Waste Bin, Operation
Manual
P/N
Description
FBC-001
Cleaver. Bare Fiber Diameter: 100 to 140μm; Fiber, Multimode or single-mode
The FBC-001 (≤ 2°) is designed for cleaving fiber ends for multimode and single-mode OTDR testing, mechanical
splicing, and UniCam® Connector installation.
S122A-01
P/N
FBC-006
P/N
FBC-012
Fitel S177A-01-KIT Splicer Kit
This hand-held, Core Alignment Splicer Kit features the S177A Splicer Standard Package plus: fiber holder
mounts, S211B fiber stripper, and our S325A one-action precision cleaver.
• A true hand-held unit, 40% lighter than standard core alignment units
• Fast 9-second splice time; 37-second heat time
• Internal battery recharges when unit is plugged into AC Power – even while splicing
• Machine self-diagnostics verify function of all motors, sensors and cameras
Description
Kit Includes S177A Splicer Main Body, Spare Electrodes, Carrying Case, Manual,
10mm Fiber Clamps, Internal Battery, AC Adapter, Electrode Cleaning Disk, Fiber Stripper,
One-Step Precision Cleaver, Fiber Wipes, Fiber Preparation Fluid, Manual
test equipment catalog
TE7.3
S325A
Corning Fiber Cleavers
Description
Cleaver. Bare Fiber Diameter: 80 to 140μm; Fiber Type: Multimode, single-mode, NZDS
The FBC-006 cleaver provides smooth, flat, perpendicular fiber end-faces (typically < 0.7°) necessary for low-loss
fusion or mechanical splicing. Fast and easy to use, it produces high quality, repeatable cleaves for multimode and
single-mode fibers in one simple step. The unit cleaves all 250μm coated fibers and 900μm buffered fibers.
P/N
S177A-01 S315
FIBER OPTIC SPLICERS
Description
OptiSplice® Ribbon Handheld Fusion Splicer with cleaver, thermal stripper, 1 set of
12-fiber handlers, fast heat-shrink oven, carrying case, 1 Li-Ion battery, external battery
charger, AC power supply with US cord, operator’s manual (English), detachable splice
tray holder/screen cover, and 1-year limited warranty
P/N
S315
Fitel S122A-KIT-01 Splicer Kit
P/N
S122A-01 Description
CT-30 for Fiber Ribbons (up to 12 fibers), Cleave Length: 10mm
CT-30A for Single Fibers: 250μm to 900μm coating, 125μm cladding, Cleave Lengths: 900μm:
10 mm to 20 mm; 250μm: 6 mm to 20 mm
OS1-0SM-T-H
Corning OptiSplice® Ribbon Fusion Splicer
P/N
OSR-0SM-T-H
CT-30
FBC-001
Description
Cleaver. Bare Fiber Diameter: 125μm nominal; Fiber Type: Multimode or single-mode
The FBC-012 Mass Fiber Cleaver provides excellent cleaves of one to 12 fibers using a simple one-step operation.
The cleaver comes with a universal single-fiber guide that may be used when cleaving single fibers. The guide can
be removed to allow the cleaver to hold common fiber handling adapters of mass fusion splicers or fiber handlers for
UniCam Connector installation. The 12-position blade can be easily replaced in the field.
S177A-01
delivering products, knowledge, service and experience
P/N
FBC-015
Description
Cleaver. Bare Fiber Diameter: 100 to 140μm; Fiber Type: Multimode or single-mode
FBC-012
The Pretium Cleaver is a handheld, ergonomically designed, precision Cleaver enabling easy installation of UniCam®
Pretium Cleaver Connectors. The Cleaver provides consistent cleaves regardless of operator skill level. It uses a
dual-clamp for precision and a diamond blade for superior cleaving. There is consistent cleaving of 250 or 900 micron
fibers and it is compatible with jacketed applications. The integrated scrap bin allows for easy collection of fiber
waste when working in a variety of environments. The handheld Cleaver does not require a work surface in order to
perform precision cleaves.
for more detailed information, visit our web site at
www.tvcinc.com
TE7.4
Fiber Optic Splicers
Fiber Optic Splicers
Hot Jacket Strippers
Tool Kits
AFL Hot Jacket Strippers
The HJS-02 and HJS-03-24 Hot Jacket Strippers provide superior ribbon and field ribbonized stripping
performance. They conserve power for field stripping when operating under battery power. A temperature
selection switch is also provided for easy optimization in the field for different fibers or operating conditions.
An optional single-fiber adapter may be used to provide easy, single-fiber capability for high strength splicing
applications, or for single-fiber capability for difficult to strip fibers. These strippers also accept the fiber
holders of the FSM-40F and FSM-40PM factory/lab splicers. An optional power assist tool for the HJS-03-24
allows smooth and controlled stripping of 24-fiber ribbons.
TVCFRK
Description
HJS-02 Hot Jacket Stripper (12 fibers max.)
HJS-02-80 Hot Jacket Stripper (80μm cladding)
HJS-03-24 Hot Jacket Stripper (24 fibers max.)
HJS-03-24PA Power Assist Tool for HJS-03-24
AC Adapter for HJS-02 and HJS-03-24
SAD-01 Single Fiber Adapter for HJS-02
HJS-03-24
TVC Fiber Spice Kit
TVC Fiber Restoration Kit
TVC Fiber Restoration Kit including Cleaver and Visual Fault Finder.
P/N - TVCFRK
Accessories
AFL Splicer V-Groove Cleaning Kit
Contamination in the v-groove of the splicer is still a primary source of trouble for the splicing technician. This
is especially problematic when splicing with a fixed v-groove Fusion Splicer. Environmental contamination,
such as dust, dirt, and fiber coating debris, as well as, the silica deposits generated during the fusion process
eventually find their way to the surface of the v-groove. To solve cleaning needs, The Splicer V-Groove
Cleaning Kit integrates eight components into an affordable and effective inspection and cleaning solution for
any fusion splicer. Small and lightweight, it fits easily into the Fujikura splicer transit case or it can be carried
separately in its own carrying case.
P/N
S014397 S014416 S014397
Description
Splicer V-Groove Cleaning Kit. Includes Scrubber Brush with stiff tapered nylon
bristles, Sweeper Brush with soft nylon bristles, Eye Loupe with 3X to 12X magnification,
LED Pen Light with momentary or constant on switching, Cleaning Fluid that is
nonflammable and environmentally safe, Lint-free Cotton Swabs, Instruction Sheet with
illustrations, Canvas Carrying Case
Splicer V-Groove Cleaning Refill Kit
acronyms
FIBER OPTIC SPLICERS
ADM������Add/drop multiplexer (or multiplexing)
APC��������Angled physical contact/angled
polished connector
ATM�������Asynchronous transfer mode protocol
BER��������Bit error rate (ITU-T uses bit error
ratio)
BPON�����Broadband passive optical network
CD����������Chromatic dispersion
CMT�������Cable modem termination system
CO����������Central office
CWDM���Coarse wavelength-division
multiplexing
DBS��������Direct broadcast service
DFB��������Distributed-feedback (laser)
DWDM���Dense wavelength-division
multiplexing
EDFA������Erbium-doped fiber amplifier
ENIU�������Ethernet network interface unit
EPON������Ethernet-ready passive optical
network
FDH��������Fiber distribution hub
FEC���������Forward error correction
FO����������Fiber-optic
FP�����������Fabry-Perot (laser)
FTTx�������Fiber-to-the-x, where x = (H)ome,
(C)urb, (B)uilding, (N)ode, (P)remises,
etc.
GPON�����Gigabit-capable passive optical
network
HDTV������High-definition television
HFC��������Hybrid fiber coaxial transmissions
IEC����������International electrotechnical
commission
IEEE��������Institute of electrical and electronic
engineers
ILEC��������Incumbent local exchange carrier
IP������������Internet protocol
ITU���������International telecommunication union
ITU-T�������International telecommunication union
- telecommunications standardization
sector
8������������Wavelength
LFD���������Live fiber detector
MFD�������Mode-field diameter
MM��������Multimode
MTTR�����Mean time to repair
NF����������Noise figure (noise from an optical
amplifier in dB)
NIU���������Network interface unit
OC����������Optical carrier (transport rate)
OLA��������Optical line amplifier
OLT���������Optical line terminal/termination
OLTS�������Optical loss test set
ONT��������Optical network terminal/termination
ONU�������Optical network unit (non-transmitting
ONT)
OPM�������Optical power meter
ORL��������Optical return loss
OSA�������Optical spectrum analyzer
OSNR�����Optical signal-to-noise ratio
OSP��������Outside plant
OTDR������Optical time-domain refl ectometer
p2mp������Point-to-multipoint
p2p���������Point-to-point
PBX��������Private branch exchange
PC����������Polished connector
PLC���������Planar lightwave (or lightguide) circuit
PMD�������Polarization mode dispersion or
physical|medium dependent
PON��������Passive optical network
POTS������Plain old telephone service
PSTN������Public switched telephone network
QoS��������Quality of service
RBOC������Regional Bell operating company
RF�����������Radio frequency
RFC��������Request for comment (IETF)
ROADM��Reconfigurable optical add/drop
multiplexer
RTD��������Round-trip delay
Rx�����������Receiver
SDH��������Synchronous digital hierarchy
SLA��������Service level agreement
SM���������Singlemode
SMF�������Singlemode fiber
SNR��������Signal-to-noise ratio
SONET����Synchronous optical network
TDM�������Time-division multiplexing
TDMA�����Time-division multiple access
TIA���������Telecommunications Industry
Association
Tx�����������Transmitter
UPC��������Ultra-polished connector
VFL���������Visual fault locator
VOD��������Video-on-demand
VoIP��������Voice-over-Internet protocol
WDM�����Wavelength-division multiplexing
Source: Compliments of EXFO
test equipment catalog
TE7.5
delivering products, knowledge, service and experience
Kit Includes:
Part Number
FO103-S
2312
226
32721SH
630-1/2
D318-5C
KS1
CK6
FPF1
Fiber Wipes
F1-0006
70035
D259-4C
63050
CR
CFSP
MK02
95
ACS
F1-00053HARD
F1-0053STP
Description
Miller Fiber Stripper
12’ Tape Measure
Miller Tweezers
Sharpie Black Marker
1/2” Nut Driver
5” Needle Nose Pliers
Kevlar Shears
Razor Knife
Fiber Preparation Fluid
Fiber Wipes/ 90 Tub
Cotton Swabs
4 Bit Screwdriver Set
Midget Diagonal Cutter
Cable Cutter
Cable Ripper
60MM Fiber Splice Sleeve (100 Bag)
Round Cable Slitter
Cable Ripper
Armored Cable Slitter
Case, Hard 20 x 8 x 15
Leather Stitched Pallet
TVC Fiber Splice Kit offers custom tool kits for all fiber optic
preparation and restoration requirements.
P/N - TVCFSK
Kit Includes:
Part Number
FO103-S
2312
226
32721SH
630-1/2
D318-5C
KS1
CK6
FPF1
Fiber Wipes
F1-0006
70035
D259-4C
63050
CR
CFSP
MK02
95
ACS
F1-00053HARD
F1-0053STP
FOC-SS
FO-VFL
Description
Miller Fiber Stripper
12’ Tape Measure
Miller Tweezers
Sharpie Black Marker
1/2” Nut Driver
5” Needle Nose Pliers
Kevlar Shears
Razor Knife
Fiber Preparation Fluid
Fiber Wipes/ 90 Tub
Cotton Swabs
4 Bit Screwdriver Set
Midget Diagonal Cutter
Cable Cutter
Cable Ripper
60MM Fiber Splice Sleeve (100 Bag)
Round Cable Slitter
Cable Ripper
Armored Cable Slitter
Case, Hard 20 x 8 x 15
Leather Stitched Pallet
Fiber Optic Cleaver
Fiber Optic Visual Fault Locator
FIBER OPTIC SPLICERS
P/N
S010340 S013264 S012960 S012964 S010496 S010428 TVCFSK
Corning Optical Fiber Access Tool (OFAT)
The Fiber Access Tool (OFAT) is designed to provide mid-span fiber access in standard Corning Cable Systems
ALTOS® Cables. This rugged hand tool will accommodate buffer tubes from 2.4 to 3.0 mm. The OFAT clamps over
a buffer tube. As the tool is pulled along the buffer tube, two offset blades split the tube without damaging fibers
inside.
P/N
OFT-000
OFT-000
Description
Optical Fiber Access Tool (OFAT) for accessing fibers in a buffer tube mid-span; accommodates
buffer tubes with outside diameters of 2.4 mm to 3.0 mm
Corning Universal Access Tool (UAT3)
The Universal Access Tool (UAT3) simplifies a mid-span access on any Corning Cable Systems single-tube fiber optic
cable product, including ribbon cable. Unlike other access tools requiring strength and awkward handling, the UAT3’s
design allows controlled movement. Its unique drive mechanism easily pulls the tool along the tube as the T-handle
is turned. As the tool passes down a length of tube, two blades on opposite sides of the tool score the outside of the
tube.
P/N
UAT3-000
UAT3-000
Description
Universal Access Tool for accessing fibers mid-span in a Corning Cable Systems single-tube fiber
optic cable product; accommodates tubes with outside diameters of 5 mm to 24 mm.
for more detailed information, visit our web site at
www.tvcinc.com
TE7.6
Fiber Optic Splicers
underground cable locators
Tool Kits
Cable Locators
Corning Ribbon Splitting Tool (RST)
RST-000
The Ribbon Splitting Tool is designed to allow separation of 12, 24 and 36-fiber ribbons into smaller ribbons. The tool
closes around the ribbon fibers as the ribbon settles into the proper slot. With actuator depressed, the tool slides
along a length of the ribbon, separating the length of ribbon that is needed into smaller-count ribbons. The tool has
slots to separate the ribbon into the following smaller ribbon fiber counts: 2/2, 2/4, 2/6, 4/4, 2/10, 4/8, 6/6, 12/12 and
12/24.
Description
Ribbon Splitting Tool for separating ribbons in mid-span or at the cable end
The Ripcord Puller for Outdoor Cable Tool, when used with a suitable cordless screwdriver, can easily pull ripcords
through the sheath and/or steel tape armor found in most outdoor fiber optic cables.
RPOC-001
Corning Advanced Tool Kit for the Fiber Optic Installation Professional
This kit, with a pop-up handle and wheels, was designed by contractors, for contractors. It
includes tools for preparing fiber optic cables, splice closures, and fiber optic hardware. The kit
also includes cable cleaners, a first aid kit, LED head lamp, safety vest, safety glasses, and gloves.
TKT-FIBERTECH-PRO
•
•
•
•
•
•
•
Description
Fusion Splicing Tool Kit
M67-003
Description
Includes Transmitter, Receiver, Conductive Attachments, Ground Rod, and
Operation Manual
810
Single high frequency – 83kHz
Jumps Insulators and Gaskets
Ergonomic receiver is comfortable to carry
Distance Sensitive Left/Right Guidance™
Simultaneous Peak and Null Display™
Real Time Continuous Gain Adjustment™
Battery saving constant current transmitter
810Dx
Description
Includes Transmitter, Receiver, Conductive Attachments, Earth/Ground Rod, Hard
Carrying Case, Operation Manual
Metrotech 850 Audio Frequency Line Tracer
This kit contains tools necessary to enter buffer tubes and prepare to splice. This is for
craftspeople who perform only splicing, not cable prep.
TKT-SPLICE
FIBER OPTIC SPLICERS
Description
Basic Splicing Tool Kit
tidbits
Why Proper Cleaning Practices Are More Critical For A Fixed V-Groove Machine
A core alignment splicer having v-groove alignment in the X/Y axis can easily overcome small amounts of debris in the v-grooves and provide
perfect alignment of the fiber cores. With fixed V-groove splicers, poor fiber alignment prior to splicing is the #1 cause of high splice loss.
Small amounts of debris can easily cause misalignment of the fibers to be spliced and just a few microns of misalignment can impact splice loss.
Differences In Estimation Accuracy On Fixed V-Groove Machines Versus Core Alignment
Loss estimation of any fusion splicer is based on everything the machine can see and measure.
In the case of a fixed v-groove splicer this would include cleave angles and axial alignment of the fiber cladding both before and after the splice. A
fixed v-groove splicer can not account for the alignment or misalignment of the fiber core or other defects such as core step or core curve in the
loss estimation.
Loss estimation with a core alignment fusion splicer is more accurate than with a fixed v-groove splicer because it can account for cleave angles
as well as alignment of the fiber cores and also splice defects such as core step and core curve.
Source: Compliments of AFL
test equipment catalog
High frequency Jumps Insulators and Gaskets
Excellent inductive locating
Saves you time – simultaneous Peak/Null
Shows you the path – left/right guidance system and audible tone
Pinpoints your utility and indicates strength of transmitted signal – digital signal strength
No manual gain adjustments – fully automated
P/N
810Dx
Corning Basic Splicing Tool Kit (TKT-SPLICE)
TE7.7
•
•
•
•
•
•
Metrotech 810Dx Pipe and Cable Locator
Description
Advanced Tool Kit
This kit is designed to prepare cables and fiber for fusion splicing. It includes tools and supplies
required for cable jacket removal and fusion splicing.
P/N
TKT-SPLICE
510
Description
Includes Transmitter, Receiver, Carrying Case, Conductive Attachment, Ground Rod,
Anchor Cord, and Operation Manual
P/N
810 Corning Fusion Splicing Tool Kit (M67-003)
P/N
M67-003
Sleek, lightweight receiver
Comfortable, upright locating
Peak and null operation – for precise locating
Advanced compression circuitry
Provides crisp response in congested areas
Narrow band Antenna – eliminates all interfering frequencies
Metrotech 810 Pipe and Cable Locator™
Description
Ripcord Puller for Outdoor Cable. This tool is used in conjunction with a cordless
screwdriver (not included)
P/N
TKT-FIBERTECH-PRO
•
•
•
•
•
•
P/N
510 Corning Ripcord Puller for Outdoor Cable Tool (RPOC)
P/N
RPOC-001
Metrotech 510™ Pipe and Cable Locator
delivering products, knowledge, service and experience
•
•
•
•
•
•
Excellent isolation from adjacent utilities
Efficient high power 2 Watt transmitter facilitates long distance locating
Transmitter impedance matching maximizes battery life
Saves you time – simultaneous Peak/Null
Shows you the path – left/right guidance system and audible tone
Pinpoints your utility and indicates strength of transmitted signal – digital signal strength
P/N
850
Description
Includes Transmitter, Receiver, Conductor Attachments, Ground Rod, Carrying Case,
Battery Charger and Operation Manual
850
UNDERGROUND CABLE LOCATORS
P/N
RST-000
™
Metrotech 9860DLXT Dual Frequency Line Locator
•
•
•
•
•
Real-Time Continuous Gain Adjustment™ and Manual Gain – A First in Locator Technology
Superior sensor technology – improved accuracy and productivity
Lighted display on all models – low light operations without a flashlight
Distance Sensitive Left/Right Guidance™
Multi-Frequency - 2 active & 2 passive
P/N
9860DLXT 9860RLXT
9860DFXT 9860RFXT
Description
Includes Transmitter, Receiver with Display Backlighting, Conductive Attachment, Ground Rod,
Carrying Case, and Operation Manual
Rechargeable Transmitter Battery Option. Includes Receiver, Transmitter with rechargeable NiCd
batteries, wall mount charger, conductive attachments, operating manual, hard carrying case
With Sheath Fault Locating Option. Includes Transmitter, Receiver with Display Backlighting,
A-Frame Receiver, Conductive Attachment, Ground Rod, Carrying Case, and Operation Manual
Rechargeable Transmitter Battery Option with Sheath Fault Locating Option. Includes Receiver,
Transmitter with SFL frequency and rechargeable NiCd batteries, wall mount charger, A-frame
receiver, conductive attachments, operating manual, hard carrying case
for more detailed information, visit our web site at
9860
www.tvcinc.com
TE8.1
underground cable locators
underground cable locators
Cable Locators
™
Cable Locators
Metrotech 9890DLXT Triple Frequency Line Locator
3M™ Dynatel™ 2273 Advanced Cable/Fault Locator
•
•
•
•
•
The 3M™ Dynatel™ Advanced Cable/Fault Locator 2273 is a microprocessor-based system that incorporates
advanced digital signal processing techniques to quickly and efficiently locate sheath (earth return) faults and trace
the path of underground cables, both copper and fiber optic (with metallic trace wire). Lightweight, compact and
well-balanced, the 2273 accurately:
• Locates cable path
• Measures cable or sonde depth with the push of a button
• Measures signal current in the cable
2273
• Pinpoints sheath faults and cable breaks
• Discriminates between light and heavy faults
• Tones shorts and grounds in aerial cable
• Locates energized power cable
Real-Time Continuous Gain Adjustment™ and Manual Gain – A First in Locator Technology
Superior sensor technology – improved accuracy and productivity
Lighted display on all models – low light operations without a flashlight
Distance Sensitive Left/Right Guidance™
Multi-Frequency - 3 active & 2 passive
P/N
9890DLXT 9890RLXT
9890DFXT
9890RFXT
Description
Includes Transmitter, Receiver with Display Backlighting, Conductive Attachment,
Ground Rod, Carrying Case, and Operation Manual
Rechargeable Transmitter Battery Option. Includes Receiver, Transmitter with rechargeable
NiCd batteries, Conductive Attachments, Operating Manual, Hard Carrying Case
Triple Frequency Line Locator with Sheath Fault Locating Option. Includes Transmitter,
Receiver with Display Backlighting, A-Frame Receiver, Conductive Attachment, Ground Rod,
Carrying Case, and Operation Manual
Triple Frequency Line Locator with Sheath Fault Locating Option. Rechargeable Transmitter
Battery Option. Includes Receiver, Transmitter with SFL option and rechargeable NiCd
transmitter batteries, wall mount charger, A-frame receiver, conductive attachment,
operating manual, hard carrying case
9890
P/N
Description
2273-U3T3
Includes 2273 Receiver, 3 Watt Transmitter, 3” coupler, A-Frame Fault Locating Accessory
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Metrotech i5000™ MetroMark™
3M™ Dynatel™ Cable/Pipe and Fault Locator & Cable/Pipe, Fault and Marker Locator
The i5000 MetroMark Utility Locator combines Metrotech’s advanced line locating technology and electronic
marker system (EMS) detection in a single instrument. Capable of detecting and measuring the depth of
all commercially available markers, the i5000 MetroMark has the added ability of reading serial numbers of
programmable Marker iD’s.
Access the i5000’s line locating or marker detection mode with one press of the receiver’s softkey. The intuitive
operational display provides simple maneuvering of all the available features – frequency selection, marker
selection, automatic or manual signal gain, and access to the main menu for other advanced features.
• Cable, Sonde & Marker Locator
• Electronic Marker System (EMS) Detection
• Marker iD read capability
• Signal Select™
• Distortion Alert™
• Guidance Compass™
The 3M™ Dynatel™ Cable/Pipe and Fault Locator 2273M and Cable/Pipe, Fault and Marker Locator 2273M-iD
incorporate advanced electronics to quickly and efficiently locate conductor or sheath (earth return) faults and trace
the path of underground cables and pipes (with metallic tracer wire).
They provide accurate cable/pipe, or Sonde depth measurements, giving a digital readout in inches, feet and inches,
or centimeters (user-selectable). Lightweight, compact and well balanced, these cable and pipe locators allow you to
accurately and easily:
2273M
• Locate cable and pipe path
• Measure cable/pipe, or Sonde depth with the push of a button
• Display relative and absolute signal current in the cable or pipe
• Identify cable pairs through wet sections
• Locate energized power and CATV cable
i5000
Additional features in 2273M-ID/CATV
• Pin-point conductor or sheath (earth return) faults and cable breaks
• Discriminate between light and heavy faults
• Tone shorts and grounds in aerial cable
• Locates all standard Electronic Marker System
P/N
Description
i5000
MetroMark Receiver 10W Transmitter, Ground Spike, Insulated Conductive Attachments,
Operations Manual, Carrying Case
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
P/N
Description
2273M-CATV/N Includes 2273M Receiver, 3 Watt Transmitter, 3” coupler, Carrying Bag, 3 Yr. Warranty
2273M-ID-CATV
Includes 2273M Receiver, 3 Watt Transmitter, 3” coupler, A-Frame Fault Locating Accessory,
Carrying Bag, 3 Yr. Warranty
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
Metrotech Clamps
P/N
4490 4820
2273
Description
MetroClamp 4” (100 mm) Inductive Transmitter Coupler. Used With: All 9800XT Series:
9860DLXT, 9860DFXT, 9860RLXT, 9860RFXT, 9890DLXT, 9890DFXT, 9890RLXT, 9890RFXT
Metroclamp 4” (100 mm) Inductive Transmitter Coupler. Used with: 510 and 810 Locators
2273M
A new addition to the 3M™ Dynatel™ Locators series, the 2220M Locator is designed to provide a simple and
accurate solution to locate buried pipes, cables and Sondes in even the most challenging field conditions. The
rugged, highly sensitive receiver uses two active trace frequencies and provides a bar graph, signal strength
and direction indication to the pipe/cable.
• Two active frequencies (8 kHz, 82 kHz)
• Dual frequency output
• Passive power, Sonde locating
• Single and dual peak modes with direction
3M™ Dynatel™ 2210 Cable Locator
The 3M™ Dynatel™ 2210 Cable Locator pinpoints the exact path of underground cables and conductors. Lightweight
and easy to use, the Dynatel 2210 Cable Locator quickly and accurately:
• Locates cable path
• Measures cable depth with the push of a button
• Measures relative signal current in the target cable
• Locates power cable with direct readout of cable depth
2210
P/N
Description
2210-CATV/N Includes 2210 Receiver, 3 Watt Transmitter, Carrying Bag
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
test equipment catalog
TE8.2
UNDERGROUND CABLE LOCATORS
UNDERGROUND CABLE LOCATORS
3M™ Dynatel™ 2220M Advanced Pipe/Cable Locator
delivering products, knowledge, service and experience
P/N
Description
2220M-C3W
Includes 2220M Receiver, 3 Watt Transmitter, Carrying Bag
2220M-C3W3-CPLR
Includes 2220M Receiver, 3 Watt Transmitter, 3 in Coupler, Carrying Bag
Multiple configurations available. Please check with your TVC representative or www.tvcinc.com for details.
for more detailed information, visit our web site at
2220M
www.tvcinc.com
TE8.3
underground cable locators
underground cable locators
Cable Locators
Marker Locators
Metrotech 760DX MetroMark™ Electronic Marker Locating System
3M™ 3019 Cable Locator Coupler Accessory Kit
•
•
•
•
•
•
•
•
•
The 3019 Accessory Kit contains a 3001 3” Dyna-coupler and a 9011 Coupler Cable with a case that can be
attached onto the locator.
P/N
3019 Description
Cable Locator Coupler Accessory Kit
3019
3M™ 3014 Earth Contact Frame
Used only when locating sheath (earth return) faults. It indicates direction to the fault and is color coded to
correspond with the Receiver’s indicator.
P/N
3014 3014
3M™ Dynatel™ 1420 EMS-iD Marker Locators are microprocessor-based systems that incorporate
advanced digital signal processing techniques to quickly and efficiently locate underground facilities even years after construction or maintenance.
Designed to be more accurate, faster and more integrated, the 1420-iD/1420E-iD EMS Marker Locators
allow you to accurately and easily:
• Locate, read and write to 3M RFiD markers
• Pinpoint the depth and location of all existing models of properly installed underground passive
EMS markers
• Conduct direct depth reading of markers
• Locate two different marker frequencies simultaneously
• Advanced features detect more information about underground utilities
9043
Extends ground capability to 12’.
Description
Ground Extension Cable
Traces the path and determines the depth of wires and metallic pipes on active or dead systems without
having to deactivate the system
Lightweight receiver provides audible and visual indications of signal strength
Transmitter output and receiver sensitivity are fully adjustable for maximum accuracy
Transmitter offers three methods of connection: direct, inductive coupler, and inductive antenna
P/N
501
501
Description
Tracker II™
1420
A feature exclusive to the 1420-iD/1420E-iD Locators is the ability to read, write and lock programmed
information into the 3M™ Electronic Marker System iD Ball Markers 1400 Series. Information such
as a pre-programmed unique identification number, facility data, owner information, application type,
placement date and other details from up to 100 markers can all be stored with date/time stamp and
GPS coordinates, and transmitted back to your PC through a standard RS232 serial port for enhanced
resource management.
Greenlee Tracker II™
•
•
•
760DX
3M™ 1420 EMS-iD Marker Locator/Read/Write
Description
Earth Contact Frame Cable
3M™ 9043 Ground Extension Cable
•
Description
MetroMark™Passive Marker Locator, Soft Carrying Case, and Operating Manual
9026
For use with the 3014 Earth Contact Frame for sheath (earth return) fault location; 4’ in length.
P/N
9043 Six standard marker frequencies plus two custom frequencies
Locates all major brands and types of passive electronic markers
Ergonomic stand alone design
Lighted LCD display
Ambient sensing gain control
Variable speaker volume
Push button depth
Wrong marker alert
Menu driven operation
P/N
760DX Description
Earth Contact Frame
3M™ 9026 Earth Contact Frame Cable
P/N
9026 ™
P/N
1420 1420E Description
EMS-iD Marker Locator with iD read/write
EMS-iD Marker Locator with iD read/write (CE Approved Export Model)
Greenlee Marker-Mate Electronic Marker Locator
P/N
EML100 Fault Locators
EML100
Identifies the exact location of even the smallest breaks in insulation by ‘pulsing’ a high-voltage signal that radiates
into the earth at the location of the faults. With the A-frame mounted receiver, a visual analog meter points the way to
the source of the voltage.
• Multiple faults on a single wire can be identified, indicating the need to replace instead of repair
• Extra-long test leads feature heavy-duty alligator clips for use on multiple cable types
• Includes a rechargeable transmitter, receiver, A-frame, ground stake, 120V charger and a 12V DC (cigarette
lighter) adapter
Description
Locator
Greenlee Buried Line Locator
•
•
•
•
•
LED and LCD signal strength indicators make it quick and easy to find exact line location
Automatic signal boost makes it easy to trace lines, even those with very weak signals
Receiver may be used in active or passive mode
Receiver locates multiple passive frequencies with a single setting
Receiver automatically locks out passive range when it detects a transmitter signal, reducing the chance of
tracing other lines carrying weaker signals
P/N
BLL-200
Description
Buried Line Locator
test equipment catalog
TE8.4
Greenlee Pulser Fault Locator
P/N
PE2003
PE2003
Description
Pulser Fault Locator
BLL-200
delivering products, knowledge, service and experience
for more detailed information, visit our web site at
www.tvcinc.com
TE8.5
UNDERGROUND CABLE LOCATORS
UNDERGROUND CABLE LOCATORS
Designed to locate buried electronic markers, including Omni Marker and Uni Marker.
• 5 ft depth range
• Detects up to seven different marker types
• Scan mode provides simultaneous detection of all marker types
• User-adjustable detection threshold
• Digital signal processor accuracy
INDEX
1000BK-SD37 OV-1000......................................... TE2.3
1000DK-SD37 OV-1000......................................... TE2.3
1101..................................................................... TE5.4
1137-5002 Sidekick T&N....................................... TE3.1
1143-5000 Sidekick V.O.C..................................... TE3.1
1155-5000 Sidekick® Plus..................................... TE3.1
1420 EMS-iD......................................................... TE8.5
1420E EMS-iD....................................................... TE8.5
15XP-A.................................................................. TE5.2
1543 LAN ProNavigator™..................................... TE3.8
1577 PC Cable-Check™ Pro.................................. TE4.4
170XL.................................................................. TE2.15
1980000x TS®19................................................... TE3.3
2010670001 CT-2................................................. TE1.4
2010762000 CT-3................................................. TE1.4
2010814010 RSVP2™........................................... TE1.3
2010838001 I-Stop............................................... TE1.3
2010967003 Model Two™.................................... TE1.1
2011000000 TR-2................................................. TE1.1
2011002103 Seeker Lite2™. .................................. TE1.4
20110420xx House Detective............................. TE1.10
2011043003 TDR 2040......................................... TE1.5
2011108000 TP1-T................................................ TE1.3
20112331xx Searcher Plus GT............................... TE1.4
20112351xx Super Plus........................................ TE1.4
2011331000 XPro Lite........................................... TE5.2
2011332000 XPro................................................. TE5.2
2011346010 Model Three™................................. TE1.1
201175000 SAT-2150........................................... TE6.1
201185001 SAT LITE............................................. TE6.1
2030-C.................................................................. TE5.3
2200M-C3W Dyantel™ 2200M............................ TE8.3
2210-CATV/N Dynatel™ 2210............................... TE8.2
2220M-C3W3-CPLR Dynatel™ 2220M................. TE8.3
2273M-CATV/N Dynatel™ 2273M........................ TE8.3
2273M-ID-CATV Dynatel™ 2273M....................... TE8.3
2273-U3T3 Dynatel™ 2273................................... TE8.3
22800HI9 TS®22................................................... TE3.3
2280000x TS®22................................................... TE3.3
2280100x TS®22A................................................ TE3.3
2550xxxx TS®25D................................................. TE3.3
26000900 Pro3000............................................. TE3.12
26100103 Pro3000............................................. TE3.12
26100900 Pro3000............................................. TE3.12
26200900 Pro3000............................................. TE3.12
26300000 Pro3000............................................. TE3.12
2650xxxx TS®90................................................... TE3.8
3014..................................................................... TE8.4
3018 Model 310.................................................... TE5.4
3019..................................................................... TE8.4
3072 Model 8455.................................................. TE3.2
3073 Model 8455.................................................. TE3.2
3080000x TS®30................................................... TE3.3
3121 Model 8455.................................................. TE3.2
3240 Pairmaster.................................................... TE4.4
3254 WireMaster XR-2......................................... TE3.8
3260 WireMaster XR-5......................................... TE3.2
3271 TDR Cable Fault Finder................................. TE1.5
3274 WireMaster.................................................. TE1.9
3275 SatAlign 2.................................................... TE6.1
3276 Chek-A-Cell.................................................. TE5.8
3279 CableRater................................................. TE1.10
3281 WireMaster Mapper................................... TE1.10
3375 Fox Jr. & Hound Jr. Kit............................... TE3.12
3399 Fox 2 & Hound 3 Probe Kit.......................... TE3.12
test equipment catalog
34XR-A.................................................................. TE5.2
35XP-A.................................................................. TE5.2
37XR-A.................................................................. TE5.3
402K..................................................................... TE3.9
4490..................................................................... TE8.2
4820..................................................................... TE8.2
501 Tracker II™..................................................... TE8.4
510....................................................................... TE8.1
560XL.................................................................... TE2.5
580XL-xx............................................................... TE2.7
5890-FC.............................................................. TE2.10
5890-SC.............................................................. TE2.10
5890-ST.............................................................. TE2.10
5XP-A.................................................................... TE5.3
635 QuickBERT-T1................................................. TE4.4
701K..................................................................... TE3.9
711K..................................................................... TE3.9
760DX MetroMark™............................................. TE8.5
801K..................................................................... TE3.9
810....................................................................... TE8.1
810Dx................................................................... TE8.1
850....................................................................... TE8.1
8500-05-0001MZ One-Click Cleaner................... TE2.17
8500-05-0002MZ One-Click Cleaner................... TE2.17
8500-10-0011MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0012MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0014MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0015MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0016MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0017MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0020MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0021MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0027MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0028MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0029MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0032MZ Cletop Cassette Cleaner......... TE2.17
8500-10-0033MZ Cletop Cassette Cleaner......... TE2.17
8800-00-0200 FC Adapter Cap.............................. TE2.4
8800-00-0209 SC Adapter Cap............................. TE2.4
8800-00-0214 2.5mm Universal............................ TE2.4
8800-00-0224 1.25mm Universal.......................... TE2.4
9005 Model 9005-A.............................................. TE5.4
9015 Model 9015-A.............................................. TE5.4
9026..................................................................... TE8.4
9043..................................................................... TE8.4
9045 Model 9045.................................................. TE5.4
9200 Model 9200.................................................. TE5.6
920XC-20C-UPC-NAFC.......................................... TE2.3
9320 Model 9320-A.............................................. TE5.6
9600 Sniff-It.......................................................... TE5.7
9601 Sniff-It 2....................................................... TE5.7
9610 Plug-Bug 2.................................................... TE5.8
9615 Line-Bug 4.................................................... TE3.2
9650 Breaker Sniff-It............................................. TE5.8
9860DFXT............................................................. TE8.1
9860DLXT............................................................. TE8.1
9860RFXT.............................................................. TE8.1
9860RLXT.............................................................. TE8.1
9890DFXT............................................................. TE8.2
9890DLXT............................................................. TE8.2
9890RFXT.............................................................. TE8.2
9890RLXT.............................................................. TE8.2
990DSLWT CopperPro™..................................... TE3.13
990DSL2+ CopperPro™ Series II....................... TE3.14
A
ACD-10 TRMS-PLUS............................................. TE5.5
ACD-15 TRMS PRO............................................... TE5.5
ACDC-100............................................................. TE5.5
Adapter Caps, Tips & Test Port Adapters............... TE2.4
AT8LK.................................................................... TE3.9
AXS-100............................................................... TE2.2
AXS-110............................................................... TE2.2
AXS-110-MM....................................................... TE2.2
AXS-110-SM......................................................... TE2.2
AXS-200/350...................................................... TE2.10
AXS-200/610...................................................... TE3.14
AXS-200/650 TK-AXS-650.................................. TE2.17
AXS-200/850........................................................ TE4.3
AXS-850............................................................... TE4.3
B
BLL-200 Buried Line Marker................................... TE8.4
BN 2277/40 OCC-55........................................... TE2.18
BN 2277/41 OCC-56........................................... TE2.18
BN 2277/42 OCC-56........................................... TE2.18
BN 2287/21 ORL-55.............................................. TE2.9
BN 2287/22 ORL-55.............................................. TE2.9
BN 2287/23 ORL-55.............................................. TE2.9
Breaker Sniff-It 9650............................................. TE5.8
Buried Line Locator BLL-200.................................. TE8.4
C
C880..................................................................... TE2.9
C9973................................................................... TE5.6
C9974................................................................... TE5.6
CableIQ™ CIQ-100.............................................. TE3.13
CableRater 3279................................................. TE1.10
CheckPoint™ Plus............................................... TE2.14
Chek-A-Cell 3276.................................................. TE5.8
CIQ-100 CableIQ™.............................................. TE3.13
CIQ-KIT CableIQ™ Kit.......................................... TE3.13
CKSM-2................................................................ TE2.8
CleanChek Connector Cleaner FCR-00X . ............ TE2.17
Cletop Cassette Cleaner Series........................... TE2.17
CLM400 TrueLength™.......................................... TE3.8
CM-450................................................................. TE5.5
CMT-80................................................................. TE5.7
Coax Mapper CX200............................................. TE1.9
Connector Cleaning Kits...................................... TE2.13
CopperPro™ 990DSLWT..................................... TE3.13
CopperPro™ Series II 990DSL2+....................... TE3.14
CS300 Satellite Signal Strength Meter.................. TE6.1
CSM1.................................................................... TE2.4
CSM1-3................................................................. TE2.4
CSS1-SM.............................................................. TE2.6
CT-2 2010670001................................................. TE1.4
CT-3 2010762000................................................. TE1.4
CT-30 S014076..................................................... TE7.4
CX200 Coax Mapper............................................. TE1.9
D
DisplayMax® 5000................................................ TE1.1
DisplayMax® 800.................................................. TE1.2
DisplayMax® 800CLI.............................................. TE1.2
DM-210................................................................. TE5.3
DM-820................................................................. TE5.3
DSA 1471.............................................................. TE6.1
DTX-1800 CableAnaylzer™II............................... TE3.13
Dynatel™ 2210 .................................................... TE8.2
Dynatel™ 2273 .................................................... TE8.3
Dynatel™ 2273M.................................................. TE8.3
Dynatel™ 2220M.................................................. TE8.3
delivering products, knowledge, service and experience
E
EML100 Marker-Mate........................................... TE8.4
EMS-iD 1420......................................................... TE8.5
ES2-PRO-SX/1 EtherScope™ II............................. TE4.1
EtherScope™ II ES2-PRO-SX/1............................. TE4.1
F
F6121A............................................................... TE2.14
F62222................................................................ TE2.14
F6222C................................................................ TE2.14
F6225.................................................................. TE2.14
F6230A............................................................... TE2.15
FBC-001................................................................ TE7.4
FBC-006................................................................ TE7.4
FBC-012................................................................ TE7.4
FBC-015................................................................ TE7.4
FBE-S Access Kits............................................... TE2.12
FCR-00X CleanChek Connector Cleaner . ............ TE2.17
FFL-050 Visual Fault Locator................................ TE2.16
FFL-050-U25 Visual Fault Locator........................ TE2.16
FFL-100 Visual Fault Locator................................ TE2.16
FFL-U12 Visual Fault Locator................................ TE2.16
Fiber Ranger FR2-xx............................................ TE2.16
FIP-400................................................................ TE2.11
FIT-HP3-60........................................................... TE2.13
FIT-HP3-60-P4..................................................... TE2.13
FIT-S105.............................................................. TE2.13
FIT-S105-C.......................................................... TE2.13
FLS-230A............................................................ TE2.15
FLS-240............................................................... TE2.15
FLS-300................................................................. TE2.7
FLS-600................................................................. TE2.7
Fluke 114............................................................... TE5.1
Fluke 115............................................................... TE5.1
Fluke 117............................................................... TE5.1
Fluke 1630............................................................. TE5.8
Fluke 179/TPAK..................................................... TE5.1
Fluke 1AC A1 II...................................................... TE5.6
Fluke 330 Series.................................................... TE5.5
Fluke 333............................................................... TE5.5
Fluke 334............................................................... TE5.5
Fluke 335............................................................... TE5.5
Fluke 336............................................................... TE5.5
Fluke 337............................................................... TE5.5
Fluke 77 IV............................................................. TE5.1
Fluke T5-1000....................................................... TE5.6
Fluke T5-600......................................................... TE5.6
FM8515B.............................................................. TE2.5
FM8515C.............................................................. TE2.5
FM-C200............................................................. TE2.12
FM-C400............................................................. TE2.12
FM-DI100............................................................ TE2.12
FM-DI200............................................................ TE2.12
FM-L200.............................................................. TE2.12
Fox 2 & Hound 3 Kit 3399.................................... TE3.12
Fox Jr. & Hound Jr. Kit 3375................................ TE3.12
FPM-300............................................................... TE2.5
FPM-302............................................................... TE2.5
FPM-302X............................................................. TE2.5
FPM-600............................................................... TE2.5
FPM-602............................................................... TE2.5
FPM-602X............................................................. TE2.5
FR1-SM-150-Y1-Y2............................................... TE2.3
FR2-XX Fiber Ranger............................................ TE2.16
FSM-11S S013988............................................... TE7.1
FSM-18S S014528................................................ TE7.1
FSM-60R12 S014534............................................ TE7.1
FSM-60S S014532................................................ TE7.1
FTB-150................................................................ TE2.2
FTB-150-ACCESS.................................................. TE2.2
FTB-150-FTTx........................................................ TE2.2
FTB-150-LH........................................................... TE2.2
FTB-150-METRO.................................................... TE2.2
FTB-150-MM......................................................... TE2.2
FTB-150-QUAD...................................................... TE2.2
FTB-200................................................................ TE2.2
FTB-5240S.......................................................... TE2.18
FTB-5700 CD/PMD.............................................. TE2.18
FTB-7200D............................................................ TE2.3
FTB-7200D-12CD.................................................. TE2.3
FTB-7200D-12CD-23B........................................... TE2.3
FTB-81xx............................................................... TE4.2
FTB-8105............................................................ TE3.14
FTB-8105 Transport Blazer.................................. TE3.14
FTB-8120NGE/8130NGE........................................ TE4.2
FTB-85xx............................................................. TE2.18
FTB-8510B............................................................ TE4.3
FTB-8510G............................................................ TE4.3
FTK1000 SimpliFiber Pro®..................................... TE2.9
FTK1300 SimpliFiber Pro®..................................... TE2.9
FTK1350 SimpliFiber Pro®..................................... TE2.9
FTK1450 SimpliFiber Pro®..................................... TE2.9
FTK2000 SimpliFiber Pro®..................................... TE2.9
FTTx Power Meters FM8515x............................... TE2.5
FVD/FVDP.............................................................. TE5.7
G
GLVOCKIT Installer’s Tool Kit................................ TE3.14
GT-11.................................................................... TE5.7
GT-95.................................................................... TE5.7
H
Hamlet® Adept™ A700WVA................................ TE1.6
Hamlet® DigiGen................................................... TE1.7
Hamlet® DigiScope DS9000.................................. TE1.6
Hamlet® Microflex................................................. TE1.6
Hamlet® MonitorScope MS9000.......................... TE1.6
HiLite................................................................... TE2.15
HJS-02 Hot Jacket Stripper.................................. TE7.5
HJS-03-24 Hot Jacket Stripper............................. TE7.5
House Detective 20110420xx............................. TE1.10
HP3-60-P4 System.............................................. TE2.13
I
i5000™ MetroMark™........................................... TE8.2
ID-H/R................................................................. TE2.15
ID-L....................................................................... TE2.7
Installer’s Tool Kit GLVOCKIT................................ TE3.14
IntelliTone Pro MT-8200-60A............................... TE3.12
I-Stop 2010838001............................................... TE1.3
IVT600 TriPorter™................................................. TE3.2
K
KP101 ToneTracer Kit............................. TE3.10, TE3.11
KP105 Turbo-Tone™ Kit....................................... TE3.10
KP106 Latch-Test™ Kit........................................ TE3.10
KP260 Net-Rite™ Kit............................... TE3.11, TE4.2
KP309 Resi-Toner™ Kit....................................... TE3.11
KP321 Testifier™ Kit.................................. TE1.9, TE3.6
KP323 Tonax™ Kit................................................. TE1.8
L
LAN ProNavigator™ 1543..................................... TE3.8
LanRoamerPRO™ TP600....................................... TE3.7
LanRoamer™ TP500............................................. TE3.7
LanScaperPRO™ NT800....................................... TE4.1
for more detailed information, visit our web site at
LanScaper™ NT700.............................................. TE4.1
Latch-Test™ TG300............................................. TE3.10
LB110 Lil’ Buttie.................................................... TE3.4
LB110-BT Lil’ Buttie............................................... TE3.4
LB220 Lil’ Buttie Pro.............................................. TE3.5
LB220-BT Lil’ Buttie Pro......................................... TE3.5
LB255 Lil’ Buttie™ Ranger..................................... TE3.5
LB255-BT Lil’ Buttie™ Ranger............................... TE3.5
LB260-BT Lil’ Buttie™ Ranger............................... TE3.5
LB300 Resi-Talker™............................................... TE3.5
LB64...................................................................... TE3.5
LB66...................................................................... TE3.5
LB68...................................................................... TE3.5
LFD-300............................................................... TE2.14
Lil’ Buttie LB110................................................... TE3.4
Lil’ Buttie Pro LB220.............................................. TE3.5
Lil’ Buttie Ranger LB255........................................ TE3.5
Line-Bug 4 9615.................................................... TE3.2
LinkRunner™ Pro LRPRO-1000.............................. TE4.4
LRPRO-1000 LinkRunner™ Pro.............................. TE4.4
LRPRO-KIT LinkRunner™ Pro Kit............................ TE4.4
LTK-400............................................................... TE2.10
LTK-400SD.......................................................... TE2.10
M
M650.................................................................... TE2.1
M67-003............................................................... TE7.7
M700.................................................................... TE2.1
M700-11-0901PR.................................................. TE2.1
M90e-0SM-T-H OptiSplice® M90e........................ TE7.2
Marker-Mate EML100........................................... TE8.4
MCTAP.................................................................. TE1.5
MetroMark™ 760DX............................................. TE8.5
MetroMark™ i5000.............................................. TE8.2
MetroScope™ MTSCOPE...................................... TE4.3
Metrotech Clamps 4490, 4820............................. TE8.2
MicroMapper ™ Pro MMP-50............................... TE3.6
MicroScanner2 MS2-100..................................... TE3.13
MMP-50 MicroMapper™ Pro................................ TE3.6
MMP-KIT MicroMapper™ Pro............................... TE3.6
Model 1101-A....................................................... TE5.4
Model 2030-C....................................................... TE5.4
Model 310 3018.................................................... TE5.4
Model 8455 3072.................................................. TE3.2
Model 9005-A....................................................... TE5.4
Model 9015-A....................................................... TE5.4
Model 9045........................................................... TE5.4
Model 9200........................................................... TE5.6
Model 9320-A....................................................... TE5.6
Model Three™ 2011346010................................. TE1.1
Model Two™ 2010967003.................................... TE1.1
MS2-100 MicroScanner2. ................................... TE3.13
MS2-KIT MicroScanner2. .................................... TE3.13
MT-8200-60A IntelliTone Pro............................... TE3.12
MTM400A............................................................. TE1.7
MTS400P.............................................................. TE1.7
MTS415P.............................................................. TE1.7
MTSCOPE MetroScope™...................................... TE4.3
MTSCOPE-KIT MetroScope™............................... TE4.3
N
NC-100 NETcat®................................................... TE3.6
NC-500 NETcat® 500 Pro...................................... TE3.6
NC-510 NETcat® 500 Pro...................................... TE3.6
NETcat® 100 NC-100 ........................................... TE3.6
NETcat® 500 Pro NC-500...................................... TE3.6
Net-Rite™ TP250.................................................. TE4.2
www.tvcinc.com
INDEX
Index
Index
Index
INDEX
NetTool Series II NTS2-PRO . ................................ TE4.1
NT700 LanScaper™.............................................. TE4.1
NT750 LanScaper™.............................................. TE4.1
NT800 LanScaperPro™......................................... TE4.1
NT850 LanScaperPro™......................................... TE4.1
NT950 Validator™................................................. TE4.2
NT955 Validator-NT™........................................... TE4.2
NTS2-PRO Net Tool Series II.................................. TE4.1
O
OCC-55 BN 2277/40........................................... TE2.18
OCC-56 BN 2277/41........................................... TE2.18
OFI 200D............................................................. TE2.14
OFI 400............................................................... TE2.14
OFI Optical Fiber Identifiers.................................. TE2.14
OFL 200................................................................. TE2.1
OFL 200-1550....................................................... TE2.1
OFL 200-1625....................................................... TE2.1
OFL 250................................................................. TE2.1
OFL2-26-0910PR OFL 250..................................... TE2.1
OFL2-26-0924PR OFL 250..................................... TE2.1
OFS 300.............................................................. TE2.11
OFT-000 OFAT........................................................ TE7.6
OLS2-Dual............................................................. TE2.6
OLS4..................................................................... TE2.6
OLS7-3.................................................................. TE2.6
OLS7-FTTH............................................................ TE2.6
One-Click Cleaner 8500-05-0001MZ................... TE2.17
OPM 1-2C............................................................. TE2.4
OPM 1-3C............................................................. TE2.4
OPM1.................................................................... TE2.4
OPM4.................................................................... TE2.4
OPM5.................................................................... TE2.4
Optical Fiber Access Tool (OFAT) OFT-000............. TE7.6
OptiSplice® CDS OSCDS-0SM-T-H........................ TE7.2
OptiSplice® M90e M90e-0SM-T-H........................ TE7.2
OptiSplice® One OS1-0SM-T-H . ........................... TE7.3
OptiSplice® Ribbon OSR-0SM-T-H......................... TE7.3
ORL-55 BN 2287/21.............................................. TE2.9
OS1-0SM-T-H OptiSplice® One.............................. TE7.3
OSCDS-0SM-T-H OptiSplice® CDS........................ TE7.2
OSR-0SM-T-H OptiSplice® Ribbon......................... TE7.3
OTDR Fiber Rings................................................... TE2.3
OTS-600.............................................................. TE2.10
OV-1000 1000BK-SD37......................................... TE2.3
P
Pairmaster 3240.................................................... TE4.4
PC Cable-Check™ 1577........................................ TE4.4
PE2003 Pulser Fault Finder.................................... TE8.5
PE810 Tele-Mate................................................... TE3.4
PE830 Tele-Mate Pro............................................. TE3.4
PE961.................................................................... TE3.4
Plug-Bug 2 9610.................................................... TE5.8
PPM-352C............................................................. TE2.5
Pro3000 26000900............................................. TE3.12
PSA 1505.............................................................. TE1.6
Pulser Fault Finder PE2003.................................... TE8.5
R
Resi-Talker™ LB300............................................... TE3.5
Resi-Toner™ TG400............................................. TE3.11
Resi-Tracer™ TT300.............................................. TE1.8
Ribbon Splitting Tool (RST).................................... TE7.7
Ripcord Puller for Outdoor Cable Tool (RPOC)........ TE7.7
RPOC-001.............................................................. TE7.7
RST-000................................................................ TE7.7
RSVP2™ 2010814010............................................. TE1.3
test equipment catalog
Additional TVC Product Offerings
RT100................................................................... TE1.3
S
S010340 HJS-02.................................................. TE7.5
S010428 SAD-01.................................................. TE7.5
S010496 AC Adapter............................................ TE7.5
S012960 HJS-03.................................................. TE7.5
S012964 HJS-02.................................................. TE7.5
S013264 HJS-02.................................................. TE7.5
S013988 FSM-11S................................................ TE7.1
S014076 CT-30..................................................... TE7.4
S014080 CT-30A................................................... TE7.4
S014397 Splicer V-Groove Cleaning Kit................. TE7.5
S014416 Splicer V-Groove Cleaning Kit................. TE7.5
S014528 FSM-18S................................................ TE7.1
S014532 FSM-60S................................................ TE7.1
S014534 FSM-60R12............................................ TE7.2
S014560 FSM-18S................................................ TE7.1
S014562 FSM-60S................................................ TE7.1
S014563 FSM-60R12............................................ TE7.2
S122A-01.............................................................. TE7.3
S122A-KIT-01........................................................ TE7.3
S177A-01-KIT....................................................... TE7.3
S315..................................................................... TE7.4
S325A................................................................... TE7.4
SAT LITE 201185001............................................. TE6.1
SAT-2150 201175000........................................... TE6.1
SatAlign 2 3275.................................................... TE6.1
Satellite Signal Strength Meter CS300.................. TE6.1
Seacher Plus GT 20112331XX............................... TE1.4
Seeker Lite2™ 2011002103.................................... TE1.4
Sidekick T&N 1137-5002....................................... TE3.1
Sidekick Plus 1155-5000......................................... TE3.
Sidekick VOC 1143-5000....................................... TE3.1
SimpliFiber Pro® FTKxxxx....................................... TE2.9
SLM 1456CM........................................................ TE1.2
SLM 1473............................................................. TE1.2
SLM 1475............................................................. TE1.2
SLP4-6D................................................................ TE2.8
SLP4-7.................................................................. TE2.8
SLP4-FTTH............................................................. TE2.8
SLP5-7.................................................................. TE2.8
SLP5-FTTH............................................................. TE2.8
Sniff-It 9600.......................................................... TE5.7
Sniff-It 2 9601....................................................... TE5.7
Speaker Seeker™ TP400....................................... TE3.7
Splicer V-Grove Cleaning Kit S014397................... TE7.5
Super Plus 20112351XX........................................ TE1.4
T
T5 Testers............................................................. TE5.6
Talk-N-Trace™ TM110........................................... TE3.5
TDR 2040 2011043003......................................... TE1.5
TDR Cable Fault Finder 3271................................. TE1.5
Tele-Mate PE810................................................... TE3.4
Tele-Mate Pro PE830............................................. TE3.4
Telephone Test Set PE961..................................... TE3.4
Testifier™ TP350........................................ TE1.9, TE3.6
TestifierPRO™ TP650.......................TE1.9, TE3.1, TE3.7
TG101 ToneGenerator™...................................... TE3.10
TG201 Turbo-Tone™............................................ TE3.10
TG300 LatchTest™.............................................. TE3.10
TG-300 Tone Generator....................................... TE2.14
TG400 Resi-Toner™............................................. TE3.11
TG455 Tonax™...................................................... TE1.8
TK-AXS-650 AXS-200/650.................................. TE2.17
TK-FF................................................................... TE2.14
TKT-CLEAN-MFC-M............................................. TE2.13
TKT-CLEAN-SFC-M.............................................. TE2.13
TKT-FIBERTECH-PRO.............................................. TE7.7
TKT-SPLICE............................................................ TE7.7
TM110 Trace-N-Talk™........................................... TE3.5
Tonax™ TG455...................................................... TE1.8
Tone Generator™ TG101..................................... TE3.10
Tone Tracer TT100.................................... TE1.8, TE3.11
TP1-T 2011108000 . ............................................. TE1.3
TP250 Net-Rite™.................................................. TE4.2
TP350 Testifier™....................................... TE1.9 , TE3.6
TP400 Speaker Seeker™....................................... TE3.7
TP410 Speaker Seeker™....................................... TE3.7
TP500 LanRoamer™............................................. TE3.7
TP600 LanRoamerPRO™....................................... TE3.7
TP607 LanRoamerPRO™....................................... TE3.7
TP650 TestifierPRO™.......................TE1.9, TE3.1, TE3.7
TP655 TestifierPRO™.......................TE1.9, TE3.1, TE3.7
TR-2 2011000000................................................. TE1.1
Trace-Rite™ TT250 ................................. TE1.8, TE3.11
Tracker II™ 501..................................................... TE8.4
Tri-Porter™ IVT600................................................ TE3.2
TrueLength™ CLM400.......................................... TE3.8
TS®19 1980000x................................................... TE3.3
TS®22 2280000x................................................... TE3.3
TS®22A 2280100x................................................ TE3.3
TS®25D 2550xxxx................................................. TE3.3
TS®30 3080000x................................................... TE3.3
TS®90 2650xxxx................................................... TE3.8
TT100 Tone Tracer.................................... TE1.8, TE3.11
TT250 Trace-Rite™.................................. TE1.8, TE3.11
TT300 Resi-Tracer™.............................................. TE1.8
Turbo-Tone™ TG201............................................ TE3.10
TV220................................................................... TE1.5
TV90..................................................................... TE1.5
TVC Fiber Restoration Kit TVCFRK......................... TE7.6
TVC Fiber Splice Kit TVCFSK.................................. TE7.6
TVCFRK TVC Fiber Restoration Kit......................... TE7.6
TVCFSK TVC Fiber Splice Ki................................... TE7.6
U
Universal Access Tool (UAT3)................................ TE7.6
V
Validator-NT™ NT955........................................... TE4.2
Validator™ NT950................................................. TE4.2
VC6-OPM............................................................ TE2.11
VFI2..................................................................... TE2.15
VFL-350............................................................... TE2.16
ViewConn Plus.................................................... TE2.11
VisiFault............................................................... TE2.16
Visual Fault Locator FFL-050................................ TE2.16
VS 300................................................................ TE2.11
W
Wi-Net WP150...................................................... TE4.4
WireMaster 3274.................................................. TE1.9
WireMaster Mapper 3281................................... TE1.10
WireMaster XR-2 3254......................................... TE3.8
WireMaster XR-5 3260......................................... TE3.2
WP150 Wi-Net...................................................... TE4.4
X
XPro 2011332000................................................. TE5.2
XPro Lite 2011331000........................................... TE5.2
delivering products, knowledge, service and experience
Whether you use fiber optic cable, twisted pair or coaxial cable, TVC Communications delivers the products and
technical support needed to build today’s communications infrastructure. Backed by close working relationships with
top manufacturers and a deep understanding of the applications and technology behind the products we sell, TVC has
proven itself to be a valued partner to both the broadband cable and telecommunications industries.
In addition to our Test Equipment product selection, TVC offers a full breadth of products for your every need:
• Broadband Products
• Digital Voice
• Headend Equipment
• Coaxial Cable • Drop Materials
• Marathon
• Connectors & Heatshrink
• Fiber Optics
• Tools & Safety Equipment
• Data - High Speed • FTTx
• Twisted Pair
• Digital Simulcast
• Hardware
• Underground
Visit our web site at www.tvcinc.com for more information.
TVC Proprietary Brands
Available exclusively through TVC Communications,
the Marathon® family of products provides exceptional
quality and value. Designed to the highest specifications,
including SCTE requirements if applicable, the Marathon
product line includes Pole Line Hardware, Guy Hardware,
Lashing Wire, Pole Banding Products, Grounding
Materials, Tools & Safety Equipment and Passives.
®
MaxCell®, TVC’s proprietary fabric innerduct, was introduced
to the marketplace in 1999. Since then it has grown to be the
new standard for innerduct applications in conduit housed
communication networks in every market including CATV, Telecom,
Military, University and Corporate Campuses, Hospitals, Power,
Municipal, Federal and Aviation.
SEG is the authorized national distributor of leading
vendors for the satellite, broadcast and cable industries.
Additionally, SEG provides installations, field maintenance
and integration services for satellite systems and
networks on a nationwide basis.
TVC’s Vikimatic brand of Outside Plant Products consists
of diverse and original products to help provide timely
solutions for a multitude of utility construction situations.
Not only can Vikimatic provide custom MultiCell conduit
configurations and PVC duct fittings, we can design and
manufacture hardware assemblies to enable you to attach
your conduit system to a bridge or tunnel.
™
White Sands Engineering fabricates precision custom cable
assemblies used throughout communication networks. From
dense bundled cabling applications at a Headend/Signal
Origination Office to simple jumpers for customer premise
applications, White Sands can make it.
www.tvcinc.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement