16 Ports Nway FE SW
With 8 ports PoE
FCC Warning
Package Contents
Front Panel (LEDs)
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment.
This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
user’s manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.
Before you start to install this switch, please
verify your package that contains the following
items:
LED Indicators of 8 Port PoE 10/100M
Switch
z One PoE Fast Ethernet Switch
z One Power Cord
z One User’s Manual
LED
Power
LAN
PoE
Status
On
Off
On
Off
Flashing
On
Off
CE Warning
User’s Manual
Description
Power is on.
Power is off.
Port is for connection.
No connection.
Data is transmitting or
receiving
Port is linked to Power
Device
No Power Device is
connected
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Connections
Introduction
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another
switch without crossover cable.
This switch provides 16 10/100M ports. It was
designed for easy installation and high
performance in an environment where traffic
is on the network and the number of users
increases continuously.
It consists of 8 PSE/PoE ports. That can solve
the limitation of the power outlet location and
offer the system designer a flexible solution to
locate the network device everywhere.
The rack-mount size was specifically
designed for medium to large workgroups.
The Switch can be installed where space is
limited; moreover it provides smooth network
migration and easy upgrade to network
capacity. The 19” size can be rack-mount on
19” cabinet.
Switch/Hub to this 16 Port Fast Ethernet
Switch
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
z 16 Port 10/100M Nway (Auto-negotiation)
Switch
z 8 PSE/PoE function ports
z Supporting the power Max. 15.4 W for each
PSE/PoE port
z 19” rack-mount size
z Auto-learn of networking configurations
z Auto-detect full/half-duplex modes for any
port
z Dedicated full-duplex 200Mbps bandwidth
z Store-and-Forward switching methods
z IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
z Non-blocking & Non-head-of-line blocking
full wire speed forwarding
z Auto-MDI/MDI-X function for any port
z Smart plug & play
PC/Other devices to this 16 Ports Fast
Ethernet Switch
Via a twisted pair cable straight through, this
switch can be connected to PCs, servers and
other network devices.
Technical Specifications
Standards
Features
Filtering/
Forwarding
Rates
Power Device to this 16 Port PoE Fast
Ethernet Switch and getting 48V power
source through Cat. 5 cables
Using Cat. 5 twisted-pair cable to connect Power
Device to the port 1~8 of this switch, and then
this switch will supply 48V power to Power
Device over Cat. 5 twisted-pair cable. Please be
noted Power Device should also comply with
IEEE 802.3af.
Rear Panel (Power)
AC input
AC input (100~240V/AC, 50~60Hz)
Transmission
Media
LED
Indicators
Power Input
IEEE 802.3af
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow control
Number of LAN Ports: 16
PSE/PoE Ports : 8
MAC Address: 4K
Buffer Memory: 1.25 Mbit
Method: Store and
Forward
100Mbps port – 148,800pps
10Mbps – 14,880pps
10BaseT Cat. 3, 4, 5
UTP/STP
100BaseTX Cat. 5 UTP/STP
Per Port: LINK/ACT, PoE
ACT/Status
Per Unit: Power
100~240V/AC, 50~60Hz
48V/DC Per Port Output –
Power
Output
Power
Consumption
Dimensions
Weight
Operating
Temperature
Storage
Temperature
Humidity
Certifications
15.4 W Max Per Port
8 Ports at Full 15.4 W
Output Supported
130 Watts (Max)
480 × 200 × 44 mm
(L x W x H)
2.85 kg
0 to 40℃
-20 to 70℃
10 to 90% RH
(non-condensing)
FCC Class A, CE
Download PDF