Mobile View Function User Manual (Android)

Mobile View Function User Manual (Android)
Recommended Mobile Phone List
Google Nexus one
HTC Desire
HTC Hero
HTC Magic
SHARP SH8128U
Lenovo LePhone
Sony Ericsson X10i
...
Recommended use 3G or WIFI network, to obtain the better preview
effect.
DVR configuration:
Note:
1. Please make sure that your DVR has Internet IP, and can be accessed via internet.
2. Please make sure that your DVR supports mobile view function. (It depends on the
DVR Firmware version.)
Operation Steps:
SVHE Series DVR:
Menu Network Platform Server Setting Load to enter the mobile port setting
interface
You need to set the listen port (command port) and choose the channels you want to view.
(Default listen port is 15966, range is 1-65535, you can change it by yourself, all channels
default disable), and you need do the listen port router mapping in your router. Please
keep other box in this interface as the default status. Please click connects to save the
setting.
Through the Main Menu Record pare to enter the network stream setting interface. User
need to reduce the network stream. We suggest that choose the bit rate to 100K of each
channel, and the frame rate is 8 fps of each channel. Remember save the setting.
SVHE Series DVR:
Menu Network Server Huake Load to enter the mobile port setting interface
You need to set the listen port (command port) and choose the channels you want to view.
(Default listen port is 15966, range is 1-65535, you can change it by yourself, all channels
default disable), and you need do the listen port router mapping in your router. Please
keep other box in this interface as the default status. Please clicks connect to save the
setting.
Through the Main Menu Record Setting Record pare to enter the network stream
setting interface. User need to reduce the network stream. We suggest that choose the bit
rate to 100K of each channel, and the frame rate is 8 fps of each channel. Remember
save the setting.
Router Configuration:
If the DVR connected to WAN through router, you need to do the command port (default
8101), http port (default 81), listen port (default 15966) router mapping .Take the TP-Link
router as an example.
1. Do the port mapping in the router. Forward the listen port which your DVR set, default is
15966.
1. Do not forget forward other 2 ports which used on DVR internet setting.
Notes: if the DVR was connected to WAN through directly DDNS or PPPOE, you just
need to do the listen port (default 15966) router mapping.
Phone:
After finishing the setup you will find the player icon on your phone main menu as the follows:
Run “player”
Main interface of player & function keys:
1. Pause / Play
2. Snapshot
3. Setting
4. Software Information
5. Channel group switch
6. Direction keys of PTZ control
7. Zoom+ & Zoom8. Focus+ & Focus9. Iris+ & Iris10. Channel switch
3.1 Access information setup
Turn into setup menu, and fill in the information according to your DVR mobile settings.
Address: Enter the IP address of the connected DVR.
Port: same with the command port you have set in your DVR platform server setting interface.
Device Name: you can set the device name to distinguish multiple devices.
User Name: the user name you have set in your DVR.
Password: same with user password you have set in your DVR.
After finishing the settings, press “Back” button to the main interface.
Press play button to start mobile surveillance and press channel selection keys to switch
camera picture.
Download PDF