Recoll user manual

Recoll user manual
Recoll user manual
Recoll user manual
Copyright © 2005-2015 Jean-Francois Dockes
Recoll user manual
Recoll user manual
November 22, 2015
Recoll user manual
Giving it a try . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Full text search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recoll overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indexing modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configurations, multiple indexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indexing failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Xapian index formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multiple indexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index case and diacritics sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The index configuration GUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indexing WEB pages you wisit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extended attributes data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Importing external tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Periodic indexing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Running indexing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using cron to automate indexing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Real time indexing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slowing down the reindexing rate for fast changing files . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Recoll user manual
Searching with the Qt graphical user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Simple search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
The default result list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
No results: the spelling suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
The result list right-click menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
The result table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Running arbitrary commands on result files (1.20 and later) . . . . . . . . . . . . . . . . . . . . . . . . . 14
Displaying thumbnails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
The preview window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Searching inside the preview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
The Query Fragments window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Complex/advanced search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Avanced search: the "find" tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Avanced search: the "filter" tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Avanced search history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
The term explorer tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.1.10 Multiple indexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.1.11 Document history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1.12 Sorting search results and collapsing duplicates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1.13 Search tips, shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Terms and search expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Working with phrases and proximity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.1.14 Saving and restoring queries (1.21 and later) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.1.15 Customizing the search interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 The result list format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
The paragraph format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Searching with the KDE KIO slave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
What’s this . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Searchable documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Searching on the command line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using Synonyms (Recoll 1.22 and later) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Path translations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
The query language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Modifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Search case and diacritics sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Anchored searches and wildcards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
More about wildcards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Recoll user manual
Wildcards and path filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Anchored searches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Desktop integration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Hotkeying recoll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
The KDE Kicker Recoll applet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Programming interface
Writing a document input handler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Simple input handlers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
"Multiple" handlers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Telling Recoll about the handler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Input handler HTML output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Page numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Field data processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Interface elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Python interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Recoll package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
The recoll module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
The Db class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
The Query class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
The Doc class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
The SearchData class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
The rclextract module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
The Extractor class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Example code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Compatibility with the previous version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Installation and configuration
Installing a binary copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Supporting packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Building from source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Building . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Building on Solaris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Recoll user manual
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Configuration overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Environment variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
The main configuration file, recoll.conf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Parameters affecting what documents we index: . . . . . . . . . . . . . . . . . . . . . . . . . 47
Parameters affecting how we generate terms: . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Parameters affecting where and how we store things: . . . . . . . . . . . . . . . . . . . . . . . 50
Parameters affecting multithread processing . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Miscellaneous parameters: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
The fields file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Extended attributes in the fields file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
The mimemap file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
The mimeconf file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
The mimeview file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
The ptrans file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Examples of configuration adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Adding an external viewer for an non-indexed type . . . . . . . . . . . . . . . . . . . . . . . . 55
Adding indexing support for a new file type . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Permission is granted to copy, distribute and/or modify this document under the terms o
f the GNU Free Documentation License, Version 1.3 or any later version published by th
e Free Software Foundation;with no Invariant Sections, no Front-Cover Texts, and no BackCover Texts.A copy of the license can be found at the following location:GNU web site.
This document introduces full text search notions and describes the installation and use of the Recoll application. This version
describes Recoll 1.21.
Recoll user manual
1 / 56
Chapter 1
Giving it a try
If you do not like reading manuals (who does?) but wish to give Recoll a try, just install the application and start the recoll
graphical user interface (GUI), which will ask permission to index your home directory by default, allowing you to search
immediately after indexing completes.
Do not do this if your home directory contains a huge number of documents and you do not want to wait or are very short on disk
space. In this case, you may first want to customize the configuration to restrict the indexed area (for the very impatient with a
completed package install, from the recoll GUI: Preferences → Indexing configuration, then adjust the Top directories section).
Also be aware that you may need to install the appropriate supporting applications for document types that need them (for
example antiword for Microsoft Word files).
Full text search
Recoll is a full text search application. Full text search finds your data by content rather than by external attributes (like a file
name). You specify words (terms) which should or should not appear in the text you are looking for, and receive in return a list
of matching documents, ordered so that the most relevant documents will appear first.
You do not need to remember in what file or email message you stored a given piece of information. You just ask for related
terms, and the tool will return a list of documents where these terms are prominent, in a similar way to Internet search engines.
Full text search applications try to determine which documents are most relevant to the search terms you provide. Computer
algorithms for determining relevance can be very complex, and in general are inferior to the power of the human mind to
rapidly determine relevance. The quality of relevance guessing is probably the most important aspect when evaluating a search
In many cases, you are looking for all the forms of a word, including plurals, different tenses for a verb, or terms derived from
the same root or stem (example: floor, floors, floored, flooring...). Queries are usually automatically expanded to
all such related terms (words that reduce to the same stem). This can be prevented for searching for a specific form.
Stemming, by itself, does not accommodate for misspellings or phonetic searches. A full text search application may also
support this form of approximation. For example, a search for aliterattion returning no result may propose, depending on
index contents, alliteration alteration alterations altercation as possible replacement terms.
Recoll overview
Recoll uses the Xapian information retrieval library as its storage and retrieval engine. Xapian is a very mature package using a
sophisticated probabilistic ranking model.
Recoll user manual
2 / 56
The Xapian library manages an index database which describes where terms appear in your document files. It efficiently processes
the complex queries which are produced by the Recoll query expansion mechanism, and is in charge of the all-important relevance
computation task.
Recoll provides the mechanisms and interface to get data into and out of the index. This includes translating the many possible
document formats into pure text, handling term variations (using Xapian stemmers), and spelling approximations (using the
aspell speller), interpreting user queries and presenting results.
In a shorter way, Recoll does the dirty footwork, Xapian deals with the intelligent parts of the process.
The Xapian index can be big (roughly the size of the original document set), but it is not a document archive. Recoll can only
display documents that still exist at the place from which they were indexed. (Actually, there is a way to reconstruct a document
from the information in the index, but the result is not nice, as all formatting, punctuation and capitalization are lost).
Recoll stores all internal data in Unicode UTF-8 format, and it can index files of many types with different character sets,
encodings, and languages into the same index. It can process documents embedded inside other documents (for example a pdf
document stored inside a Zip archive sent as an email attachment...), down to an arbitrary depth.
Stemming is the process by which Recoll reduces words to their radicals so that searching does not depend, for example, on a
word being singular or plural (floor, floors), or on a verb tense (flooring, floored). Because the mechanisms used for stemming
depend on the specific grammatical rules for each language, there is a separate Xapian stemmer module for most common
languages where stemming makes sense.
Recoll stores the unstemmed versions of terms in the main index and uses auxiliary databases for term expansion (one for each
stemming language), which means that you can switch stemming languages between searches, or add a language without needing
a full reindex.
Storing documents written in different languages in the same index is possible, and commonly done. In this situation, you can
specify several stemming languages for the index.
Recoll currently makes no attempt at automatic language recognition, which means that the stemmer will sometimes be applied
to terms from other languages with potentially strange results. In practise, even if this introduces possibilities of confusion,
this approach has been proven quite useful, and it is much less cumbersome than separating your documents according to what
language they are written in.
Before version 1.18, Recoll stripped most accents and diacritics from terms, and converted them to lower case before either
storing them in the index or searching for them. As a consequence, it was impossible to search for a particular capitalization of a
term (US / us), or to discriminate two terms based on diacritics (sake / saké, mate / maté).
As of version 1.18, Recoll can optionally store the raw terms, without accent stripping or case conversion. In this configuration,
it is still possible (and most common) for a query to be insensitive to case and/or diacritics. Appropriate term expansions are
performed before actually accessing the main index. This is described in more detail in the section about index case and diacritics
Recoll has many parameters which define exactly what to index, and how to classify and decode the source documents. These are
kept in configuration files. A default configuration is copied into a standard location (usually something like /usr/[local/
]share/recoll/examples) during installation. The default values set by the configuration files in this directory may be
overridden by values that you set inside your personal configuration, found by default in the .recoll sub-directory of your
home directory. The default configuration will index your home directory with default parameters and should be sufficient for
giving Recoll a try, but you may want to adjust it later, which can be done either by editing the text files or by using configuration
menus in the recoll GUI. Some other parameters affecting only the recoll GUI are stored in the standard location defined by Qt.
The indexing process is started automatically the first time you execute the recoll GUI. Indexing can also be performed by
executing the recollindex command. Recoll indexing is multithreaded by default when appropriate hardware resources are
available, and can perform in parallel multiple tasks among text extraction, segmentation and index updates.
Searches are usually performed inside the recoll GUI, which has many options to help you find what you are looking for.
However, there are other ways to perform Recoll searches: mostly a command line interface, a Python programming interface, a
KDE KIO slave module, and Ubuntu Unity Lens (for older versions) or Scope (for current versions) modules.
Recoll user manual
3 / 56
Chapter 2
Indexing is the process by which the set of documents is analyzed and the data entered into the database. Recoll indexing is
normally incremental: documents will only be processed if they have been modified since the last run. On the first execution,
all documents will need processing. A full index build can be forced later by specifying an option to the indexing command
(recollindex -z or -Z).
recollindex skips files which caused an error during a previous pass. This is a performance optimization, and a new behaviour in
version 1.21 (failed files were always retried by previous versions). The command line option -k can be set to retry failed files,
for example after updating a filter.
The following sections give an overview of different aspects of the indexing processes and configuration, with links to detailed
Depending on your data, temporary files may be needed during indexing, some of them possibly quite big. You can use the
RECOLL_TMPDIR or TMPDIR environment variables to determine where they are created (the default is to use /tmp). Using
TMPDIR has the nice property that it may also be taken into account by auxiliary commands executed by recollindex.
Indexing modes
Recoll indexing can be performed along two different modes:
• Periodic (or batch) indexing: indexing takes place at discrete times, by executing the recollindex command. The typical
usage is to have a nightly indexing run programmed into your cron file.
• Real time indexing: indexing takes place as soon as a file is created or changed. recollindex runs as a daemon and uses a file
system alteration monitor such as inotify, Fam or Gamin to detect file changes.
The choice between the two methods is mostly a matter of preference, and they can be combined by setting up multiple indexes
(ie: use periodic indexing on a big documentation directory, and real time indexing on a small home directory). Monitoring a big
file system tree can consume significant system resources.
The choice of method and the parameters used can be configured from the recoll GUI: Preferences → Indexing schedule
Configurations, multiple indexes
The parameters describing what is to be indexed and local preferences are defined in text files contained in a configuration
All parameters have defaults, defined in system-wide files.
Recoll user manual
4 / 56
Without further configuration, Recoll will index all appropriate files from your home directory, with a reasonable set of defaults.
A default personal configuration directory ($HOME/.recoll/) is created when a Recoll program is first executed. It is possible
to create other configuration directories, and use them by setting the RECOLL_CONFDIR environment variable, or giving the c option to any of the Recoll commands.
In some cases, it may be interesting to index different areas of the file system to separate databases. You can do this by using
multiple configuration directories, each indexing a file system area to a specific database. Typically, this would be done to
separate personal and shared indexes, or to take advantage of the organization of your data to improve search precision.
The generated indexes can be queried concurrently in a transparent manner.
For index generation, multiple configurations are totally independant from each other. When multiple indexes need to be used
for a single search, some parameters should be consistent among the configurations.
Document types
Recoll knows about quite a few different document types. The parameters for document types recognition and processing are set
in configuration files.
Most file types, like HTML or word processing files, only hold one document. Some file types, like email folders or zip archives,
can hold many individually indexed documents, which may themselves be compound ones. Such hierarchies can go quite deep,
and Recoll can process, for example, a LibreOffice document stored as an attachment to an email message inside an email folder
archived in a zip file...
Recoll indexing processes plain text, HTML, OpenDocument (Open/LibreOffice), email formats, and a few others internally.
Other file types (ie: postscript, pdf, ms-word, rtf ...) need external applications for preprocessing. The list is in the installation
section. After every indexing operation, Recoll updates a list of commands that would be needed for indexing existing files
types. This list can be displayed by selecting the menu option File → Show Missing Helpers in the recoll GUI. It is stored in the
missing text file inside the configuration directory.
By default, Recoll will try to index any file type that it has a way to read. This is sometimes not desirable, and there are ways to
either exclude some types, or on the contrary to define a positive list of types to be indexed. In the latter case, any type not in the
list will be ignored.
Excluding types can be done by adding wildcard name patterns to the skippedNames list, which can be done from the
GUI Index configuration menu. For versions 1.20 and later, you can alternatively set the excludedmimetypes list in the
configuration file. This can be redefined for subdirectories.
You can also define an exclusive list of MIME types to be indexed (no others will be indexed), by settting the indexedmimet
ypes configuration variable. Example:
indexedmimetypes = text/html application/pdf
It is possible to redefine this parameter for subdirectories. Example:
indexedmimetypes = application/pdf
(When using sections like this, don’t forget that they remain in effect until the end of the file or another section indicator).
excludedmimetypes or indexedmimetypes, can be set either by editing the main configuration file (recoll.conf), or
from the GUI index configuration tool.
Indexing failures
Indexing may fail for some documents, for a number of reasons: a helper program may be missing, the document may be corrupt,
we may fail to uncompress a file because no file system space is available, etc.
Recoll versions prior to 1.21 always retried to index files which had previously caused an error. This guaranteed that anything
that may have become indexable (for example because a helper had been installed) would be indexed. However this was bad
Recoll user manual
5 / 56
for performance because some indexing failures may be quite costly (for example failing to uncompress a big file because of
insufficient disk space).
The indexer in Recoll versions 1.21 and later do not retry failed file by default. Retrying will only occur if an explicit option (k) is set on the recollindex command line, or if a script executed when recollindex starts up says so. The script is defined by a
configuration variable (checkneedretryindexscript), and makes a rather lame attempt at deciding if a helper command
may have been installed, by checking if any of the common bin directories have changed.
In the rare case where the index becomes corrupted (which can signal itself by weird search results or crashes), the index files
need to be erased before restarting a clean indexing pass. Just delete the xapiandb directory (see next section), or, alternatively,
start the next recollindex with the -z option, which will reset the database before indexing.
Index storage
The default location for the index data is the xapiandb subdirectory of the Recoll configuration directory, typically $HOME/
.recoll/xapiandb/. This can be changed via two different methods (with different purposes):
• You can specify a different configuration directory by setting the RECOLL_CONFDIR environment variable, or using the -c
option to the Recoll commands. This method would typically be used to index different areas of the file system to different
indexes. For example, if you were to issue the following commands:
export RECOLL_CONFDIR=~/.indexes-email
Then Recoll would use configuration files stored in ~/.indexes-email/ and, (unless specified otherwise in recoll.
conf) would look for the index in ~/.indexes-email/xapiandb/.
Using multiple configuration directories and configuration options allows you to tailor multiple configurations and indexes to
handle whatever subset of the available data you wish to make searchable.
• For a given configuration directory, you can specify a non-default storage location for the index by setting the dbdir parameter
in the configuration file (see the configuration section). This method would mainly be of use if you wanted to keep the
configuration directory in its default location, but desired another location for the index, typically out of disk occupation
The size of the index is determined by the size of the set of documents, but the ratio can vary a lot. For a typical mixed set of
documents, the index size will often be close to the data set size. In specific cases (a set of compressed mbox files for example),
the index can become much bigger than the documents. It may also be much smaller if the documents contain a lot of images or
other non-indexed data (an extreme example being a set of mp3 files where only the tags would be indexed).
Of course, images, sound and video do not increase the index size, which means that nowadays (2012), typically, even a big
index will be negligible against the total amount of data on the computer.
The index data directory (xapiandb) only contains data that can be completely rebuilt by an index run (as long as the original
documents exist), and it can always be destroyed safely.
Xapian index formats
Xapian versions usually support several formats for index storage. A given major Xapian version will have a current format, used
to create new indexes, and will also support the format from the previous major version.
Xapian will not convert automatically an existing index from the older format to the newer one. If you want to upgrade to the
new format, or if a very old index needs to be converted because its format is not supported any more, you will have to explicitly
delete the old index, then run a normal indexing process.
Using the -z option to recollindex is not sufficient to change the format, you will have to delete all files inside the index directory
(typically ~/.recoll/xapiandb) before starting the indexing.
Recoll user manual
6 / 56
Security aspects
The Recoll index does not hold copies of the indexed documents. But it does hold enough data to allow for an almost complete
reconstruction. If confidential data is indexed, access to the database directory should be restricted.
Recoll (since version 1.4) will create the configuration directory with a mode of 0700 (access by owner only). As the index data
directory is by default a sub-directory of the configuration directory, this should result in appropriate protection.
If you use another setup, you should think of the kind of protection you need for your index, set the directory and files access
modes appropriately, and also maybe adjust the umask used during index updates.
Index configuration
Variables set inside the Recoll configuration files control which areas of the file system are indexed, and how files are processed.
These variables can be set either by editing the text files or by using the dialogs in the recoll GUI.
The first time you start recoll, you will be asked whether or not you would like it to build the index. If you want to adjust the
configuration before indexing, just click Cancel at this point, which will get you into the configuration interface. If you exit at
this point, recoll will have created a ~/.recoll directory containing empty configuration files, which you can edit by hand.
The configuration is documented inside the installation chapter of this document, or in the recoll.conf(5) man page, but the most
current information will most likely be the comments inside the sample file. The most immediately useful variable you may
interested in is probably topdirs, which determines what subtrees get indexed.
The applications needed to index file types other than text, HTML or email (ie: pdf, postscript, ms-word...) are described in the
external packages section.
As of Recoll 1.18 there are two incompatible types of Recoll indexes, depending on the treatment of character case and diacritics.
The next section describes the two types in more detail.
Multiple indexes
Multiple Recoll indexes can be created by using several configuration directories which are usually set to index different areas of
the file system. A specific index can be selected for updating or searching, using the RECOLL_CONFDIR environment variable
or the -c option to recoll and recollindex.
A typical usage scenario for the multiple index feature would be for a system administrator to set up a central index for shared
data, that you choose to search or not in addition to your personal data. Of course, there are other possibilities. There are many
cases where you know the subset of files that should be searched, and where narrowing the search can improve the results. You
can achieve approximately the same effect with the directory filter in advanced search, but multiple indexes will have much better
performance and may be worth the trouble.
A recollindex program instance can only update one specific index.
The main index (defined by RECOLL_CONFDIR or -c) is always active. If this is undesirable, you can set up your base
configuration to index an empty directory.
The different search interfaces (GUI, command line, ...) have different methods to define the set of indexes to be used, see the
appropriate section.
If a set of multiple indexes are to be used together for searches, some configuration parameters must be consistent among the
set. These are parameters which need to be the same when indexing and searching. As the parameters come from the main
configuration when searching, they need to be compatible with what was set when creating the other indexes (which came from
their respective configuration directories).
Most importantly, all indexes to be queried concurrently must have the same option concerning character case and diacritics
stripping, but there are other constraints. Most of the relevant parameters are described in the linked section.
Recoll user manual
7 / 56
Index case and diacritics sensitivity
As of Recoll version 1.18 you have a choice of building an index with terms stripped of character case and diacritics, or one with
raw terms. For a source term of Résumé, the former will store resume, the latter Résumé.
Each type of index allows performing searches insensitive to case and diacritics: with a raw index, the user entry will be expanded
to match all case and diacritics variations present in the index. With a stripped index, the search term will be stripped before
A raw index allows for another possibility which a stripped index cannot offer: using case and diacritics to discriminate between
terms, returning different results when searching for US and us or resume and résumé. Read the section about search case
and diacritics sensitivity for more details.
The type of index to be created is controlled by the indexStripChars configuration variable which can only be changed by
editing the configuration file. Any change implies an index reset (not automated by Recoll), and all indexes in a search must be
set in the same way (again, not checked by Recoll).
If the indexStripChars is not set, Recoll 1.18 creates a stripped index by default, for compatibility with previous versions.
As a cost for added capability, a raw index will be slightly bigger than a stripped one (around 10%). Also, searches will be more
complex, so probably slightly slower, and the feature is still young, so that a certain amount of weirdness cannot be excluded.
One of the most adverse consequence of using a raw index is that some phrase and proximity searches may become impossible: because each term needs to be expanded, and all combinations searched for, the multiplicative expansion may become
The index configuration GUI
Most parameters for a given index configuration can be set from a recoll GUI running on this configuration (either as default, or
by setting RECOLL_CONFDIR or the -c option.)
The interface is started from the Preferences → Index Configuration menu entry. It is divided in four tabs, Global parameters,
Local parameters, Web history (which is explained in the next section) and Search parameters.
The Global parameters tab allows setting global variables, like the lists of top directories, skipped paths, or stemming languages.
The Local parameters tab allows setting variables that can be redefined for subdirectories. This second tab has an initially empty
list of customisation directories, to which you can add. The variables are then set for the currently selected directory (or at the
top level if the empty line is selected).
The Search parameters section defines parameters which are used at query time, but are global to an index and affect all search
tools, not only the GUI.
The meaning for most entries in the interface is self-evident and documented by a ToolTip popup on the text label. For more
detail, you will need to refer to the configuration section of this guide.
The configuration tool normally respects the comments and most of the formatting inside the configuration file, so that it is quite
possible to use it on hand-edited files, which you might nevertheless want to backup first...
Indexing WEB pages you wisit
With the help of a Firefox extension, Recoll can index the Internet pages that you visit. The extension was initially designed for
the Beagle indexer, but it has recently be renamed and better adapted to Recoll.
The extension works by copying visited WEB pages to an indexing queue directory, which Recoll then processes, indexing the
data, storing it into a local cache, then removing the file from the queue.
This feature can be enabled in the GUI Index configuration panel, or by editing the configuration file (set processwebqueue
to 1).
A current pointer to the extension can be found, along with up-to-date instructions, on the Recoll wiki.
A copy of the indexed WEB pages is retained by Recoll in a local cache (from which previews can be fetched). The cache size
can be adjusted from the Index configuration / Web history panel. Once the maximum size is reached, old pages are purged both from the cache and the index - to make room for new ones, so you need to explicitly archive in some other place the pages
that you want to keep indefinitely.
Recoll user manual
8 / 56
Extended attributes data
User extended attributes are named pieces of information that most modern file systems can attach to any file.
Recoll versions 1.19 and later process extended attributes as document fields by default. For older versions, this has to be
activated at build time.
A freedesktop standard defines a few special attributes, which are handled as such by Recoll:
mime_type If set, this overrides any other determination of the file MIME type.
charset If set, this defines the file character set (mostly useful for plain text files).
By default, other attributes are handled as Recoll fields. On Linux, the user prefix is removed from the name. This can be
configured more precisely inside the fields configuration file.
Importing external tags
During indexing, it is possible to import metadata for each file by executing commands. For example, this could extract user tag
data for the file and store it in a field for indexing.
See the section about the metadatacmds field in the main configuration chapter for more detail.
Periodic indexing
Running indexing
Indexing is always performed by the recollindex program, which can be started either from the command line or from the File
menu in the recoll GUI program. When started from the GUI, the indexing will run on the same configuration recoll was started
on. When started from the command line, recollindex will use the RECOLL_CONFDIR variable or accept a -c confdir option
to specify a non-default configuration directory.
If the recoll program finds no index when it starts, it will automatically start indexing (except if canceled).
The recollindex indexing process can be interrupted by sending an interrupt (Ctrl-C, SIGINT) or terminate (SIGTERM) signal.
Some time may elapse before the process exits, because it needs to properly flush and close the index. This can also be done
from the recoll GUI File → Stop Indexing menu entry.
After such an interruption, the index will be somewhat inconsistent because some operations which are normally performed at
the end of the indexing pass will have been skipped (for example, the stemming and spelling databases will be inexistant or out
of date). You just need to restart indexing at a later time to restore consistency. The indexing will restart at the interruption point
(the full file tree will be traversed, but files that were indexed up to the interruption and for which the index is still up to date will
not need to be reindexed).
recollindex has a number of other options which are described in its man page. Only a few will be described here.
Option -z will reset the index when starting. This is almost the same as destroying the index files (the nuance is that the Xapian
format version will not be changed).
Option -Z will force the update of all documents without resetting the index first. This will not have the "clean start" aspect of
-z, but the advantage is that the index will remain available for querying while it is rebuilt, which can be a significant advantage
if it is very big (some installations need days for a full index rebuild).
Option -k will force retrying files which previously failed to be indexed, for example because of a missing helper program.
Of special interest also, maybe, are the -i and -f options. -i allows indexing an explicit list of files (given as command
line parameters or read on stdin). -f tells recollindex to ignore file selection parameters from the configuration. Together,
these options allow building a custom file selection process for some area of the file system, by adding the top directory to the
skippedPaths list and using an appropriate file selection method to build the file list to be fed to recollindex -if. Trivial
Recoll user manual
9 / 56
find . -name indexable.txt -print | recollindex -if
recollindex -i will not descend into subdirectories specified as parameters, but just add them as index entries. It is up to the
external file selection method to build the complete file list.
Using cron to automate indexing
The most common way to set up indexing is to have a cron task execute it every night. For example the following crontab
entry would do it every day at 3:30AM (supposing recollindex is in your PATH):
30 3 * * * recollindex > /some/tmp/dir/recolltrace 2>&1
Or, using anacron:
su mylogin -c "recollindex recollindex > /tmp/rcltraceme 2>&1"
As of version 1.17 the Recoll GUI has dialogs to manage crontab entries for recollindex. You can reach them from the
Preferences → Indexing Schedule menu. They only work with the good old cron, and do not give access to all features of cron
The usual command to edit your crontab is crontab -e (which will usually start the vi editor to edit the file). You may have
more sophisticated tools available on your system.
Please be aware that there may be differences between your usual interactive command line environment and the one seen by
crontab commands. Especially the PATH variable may be of concern. Please check the crontab manual pages about possible
Real time indexing
Real time monitoring/indexing is performed by starting the recollindex -m command. With this option, recollindex will detach
from the terminal and become a daemon, permanently monitoring file changes and updating the index.
Under KDE, Gnome and some other desktop environments, the daemon can automatically started when you log in, by creating a
desktop file inside the ~/.config/autostart directory. This can be done for you by the Recoll GUI. Use the Preferences>Indexing Schedule menu.
With older X11 setups, starting the daemon is normally performed as part of the user session script.
The script can be used to easily start and stop the daemon. It can be found in the examples directory (typically
For example, my out of fashion xdm-based session has a .xsession script with the following lines at the end:
RECOLL_CONFDIR=$recollconf $recolldata/examples/ start
The indexing daemon gets started, then the window manager, for which the session waits.
By default the indexing daemon will monitor the state of the X11 session, and exit when it finishes, it is not necessary to kill it
explicitly. (The X11 server monitoring can be disabled with option -x to recollindex).
If you use the daemon completely out of an X11 session, you need to add option -x to disable X11 session monitoring (else the
daemon will not start).
By default, the messages from the indexing daemon will be setn to the same file as those from the interactive commands (logf
ilename). You may want to change this by setting the daemlogfilename and daemloglevel configuration parameters.
Recoll user manual
10 / 56
Also the log file will only be truncated when the daemon starts. If the daemon runs permanently, the log file may grow quite big,
depending on the log level.
When building Recoll, the real time indexing support can be customised during package configuration with the --with[out]fam or --with[out]-inotify options. The default is currently to include inotify monitoring on systems that support it,
and, as of Recoll 1.17, gamin support on FreeBSD.
While it is convenient that data is indexed in real time, repeated indexing can generate a significant load on the system when files
such as email folders change. Also, monitoring large file trees by itself significantly taxes system resources. You probably do not
want to enable it if your system is short on resources. Periodic indexing is adequate in most cases.
Increasing resources for inotify
On Linux systems, monitoring a big tree may need increasing the resources available to inotify, which are normally defined in
### inotify
# cat /proc/sys/fs/inotify/max_queued_events
# cat /proc/sys/fs/inotify/max_user_instances
# cat /proc/sys/fs/inotify/max_user_watches
# -- Change to:
- 16384
- 128
- 16384
Especially, you will need to trim your tree or adjust the max_user_watches value if indexing exits with a message about
errno ENOSPC (28) from inotify_add_watch.
Slowing down the reindexing rate for fast changing files
When using the real time monitor, it may happen that some files need to be indexed, but change so often that they impose an
excessive load for the system.
Recoll provides a configuration option to specify the minimum time before which a file, specified by a wildcard pattern, cannot
be reindexed. See the mondelaypatterns parameter in the configuration section.
Recoll user manual
11 / 56
Chapter 3
Searching with the Qt graphical user interface
The recoll program provides the main user interface for searching. It is based on the Qt library.
recoll has two search modes:
• Simple search (the default, on the main screen) has a single entry field where you can enter multiple words.
• Advanced search (a panel accessed through the Tools menu or the toolbox bar icon) has multiple entry fields, which you may
use to build a logical condition, with additional filtering on file type, location in the file system, modification date, and size.
In most cases, you can enter the terms as you think them, even if they contain embedded punctuation or other non-textual
characters. For example, Recoll can handle things like email addresses, or arbitrary cut and paste from another text window,
punctation and all.
The main case where you should enter text differently from how it is printed is for east-asian languages (Chinese, Japanese,
Korean). Words composed of single or multiple characters should be entered separated by white space in this case (they would
typically be printed without white space).
Some searches can be quite complex, and you may want to re-use them later, perhaps with some tweaking. Recoll versions 1.21
and later can save and restore searches, using XML files. See Saving and restoring queries.
Simple search
1. Start the recoll program.
2. Possibly choose a search mode: Any term, All terms, File name or Query language.
3. Enter search term(s) in the text field at the top of the window.
4. Click the Search button or hit the Enter key to start the search.
The initial default search mode is Query language. Without special directives, this will look for documents containing all of the
search terms (the ones with more terms will get better scores), just like the All terms mode which will ignore such directives.
Any term will search for documents where at least one of the terms appear.
The Query Language features are described in a separate section.
All search modes allow wildcards inside terms (*, ?, []). You may want to have a look at the section about wildcards for more
information about this.
File name will specifically look for file names. The point of having a separate file name search is that wild card expansion can be
performed more efficiently on a small subset of the index (allowing wild cards on the left of terms without excessive penality).
Things to know:
Recoll user manual
12 / 56
• White space in the entry should match white space in the file name, and is not treated specially.
• The search is insensitive to character case and accents, independantly of the type of index.
• An entry without any wild card character and not capitalized will be prepended and appended with ’*’ (ie: etc -> *etc*, but
Etc -> etc).
• If you have a big index (many files), excessively generic fragments may result in inefficient searches.
You can search for exact phrases (adjacent words in a given order) by enclosing the input inside double quotes. Ex: "virtual
When using a stripped index, character case has no influence on search, except that you can disable stem expansion for any term
by capitalizing it. Ie: a search for floor will also normally look for flooring, floored, etc., but a search for Floor will
only look for floor, in any character case. Stemming can also be disabled globally in the preferences. When using a raw index,
the rules are a bit more complicated.
Recoll remembers the last few searches that you performed. You can use the simple search text entry widget (a combobox) to
recall them (click on the thing at the right of the text field). Please note, however, that only the search texts are remembered, not
the mode (all/any/file name).
Typing Esc Space while entering a word in the simple search entry will open a window with possible completions for the word.
The completions are extracted from the database.
Double-clicking on a word in the result list or a preview window will insert it into the simple search entry field.
You can cut and paste any text into an All terms or Any term search field, punctuation, newlines and all - except for wildcard
characters (single ? characters are ok). Recoll will process it and produce a meaningful search. This is what most differentiates
this mode from the Query Language mode, where you have to care about the syntax.
You can use the ToolsAdvanced search dialog for more complex searches.
The default result list
After starting a search, a list of results will instantly be displayed in the main list window.
By default, the document list is presented in order of relevance (how well the system estimates that the document matches the
query). You can sort the result by ascending or descending date by using the vertical arrows in the toolbar.
Clicking on the Preview link for an entry will open an internal preview window for the document. Further Preview clicks for
the same search will open tabs in the existing preview window. You can use Shift+Click to force the creation of another preview
window, which may be useful to view the documents side by side. (You can also browse successive results in a single preview
window by typing Shift+ArrowUp/Down in the window).
Clicking the Open link will start an external viewer for the document. By default, Recoll lets the desktop choose the appropriate
application for most document types (there is a short list of exceptions, see further). If you prefer to completely customize the
choice of applications, you can uncheck the Use desktop preferences option in the GUI preferences dialog, and click the Choose
editor applications button to adjust the predefined Recoll choices. The tool accepts multiple selections of MIME types (e.g. to
set up the editor for the dozens of office file types).
Even when Use desktop preferences is checked, there is a small list of exceptions, for MIME types where the Recoll choice
should override the desktop one. These are applications which are well integrated with Recoll, especially evince for viewing
PDF and Postscript files because of its support for opening the document at a specific page and passing a search string as an
argument. Of course, you can edit the list (in the GUI preferences) if you would prefer to lose the functionality and use the
standard desktop tool.
You may also change the choice of applications by editing the mimeview configuration file if you find this more convenient.
Each result entry also has a right-click menu with an Open With entry. This lets you choose an application from the list of those
which registered with the desktop for the document MIME type.
The Preview and Open edit links may not be present for all entries, meaning that Recoll has no configured way to preview
a given file type (which was indexed by name only), or no configured external editor for the file type. This can sometimes be
Recoll user manual
13 / 56
adjusted simply by tweaking the mimemap and mimeview configuration files (the latter can be modified with the user preferences
The format of the result list entries is entirely configurable by using the preference dialog to edit an HTML fragment.
You can click on the Query details link at the top of the results page to see the query actually performed, after stem
expansion and other processing.
Double-clicking on any word inside the result list or a preview window will insert it into the simple search text.
The result list is divided into pages (the size of which you can change in the preferences). Use the arrow buttons in the toolbar or
the links at the bottom of the page to browse the results.
No results: the spelling suggestions
When a search yields no result, and if the aspell dictionary is configured, Recoll will try to check for misspellings among the
query terms, and will propose lists of replacements. Clicking on one of the suggestions will replace the word and restart the
search. You can hold any of the modifier keys (Ctrl, Shift, etc.) while clicking if you would rather stay on the suggestion screen
because several terms need replacement.
The result list right-click menu
Apart from the preview and edit links, you can display a pop-up menu by right-clicking over a paragraph in the result list. This
menu has the following entries:
• Preview
• Open
• Open With
• Run Script
• Copy File Name
• Copy Url
• Save to File
• Find similar
• Preview Parent document
• Open Parent document
• Open Snippets Window
The Preview and Open entries do the same thing as the corresponding links.
Open With lets you open the document with one of the applications claiming to be able to handle its MIME type (the information
comes from the .desktop files in /usr/share/applications).
Run Script allows starting an arbitrary command on the result file. It will only appear for results which are top-level files. See
further for a more detailed description.
The Copy File Name and Copy Url copy the relevant data to the clipboard, for later pasting.
Save to File allows saving the contents of a result document to a chosen file. This entry will only appear if the document does not
correspond to an existing file, but is a subdocument inside such a file (ie: an email attachment). It is especially useful to extract
attachments with no associated editor.
The Open/Preview Parent document entries allow working with the higher level document (e.g. the email message an attachment
comes from). Recoll is sometimes not totally accurate as to what it can or can’t do in this area. For example the Parent entry will
Recoll user manual
14 / 56
also appear for an email which is part of an mbox folder file, but you can’t actually visualize the mbox (there will be an error
dialog if you try).
If the document is a top-level file, Open Parent will start the default file manager on the enclosing filesystem directory.
The Find similar entry will select a number of relevant term from the current document and enter them into the simple search
field. You can then start a simple search, with a good chance of finding documents related to the current result. I can’t remember
a single instance where this function was actually useful to me...
The Open Snippets Window entry will only appear for documents which support page breaks (typically PDF, Postscript, DVI).
The snippets window lists extracts from the document, taken around search terms occurrences, along with the corresponding
page number, as links which can be used to start the native viewer on the appropriate page. If the viewer supports it, its search
function will also be primed with one of the search terms.
The result table
In Recoll 1.15 and newer, the results can be displayed in spreadsheet-like fashion. You can switch to this presentation by clicking
the table-like icon in the toolbar (this is a toggle, click again to restore the list).
Clicking on the column headers will allow sorting by the values in the column. You can click again to invert the order, and use
the header right-click menu to reset sorting to the default relevance order (you can also use the sort-by-date arrows to do this).
Both the list and the table display the same underlying results. The sort order set from the table is still active if you switch back
to the list mode. You can click twice on a date sort arrow to reset it from there.
The header right-click menu allows adding or deleting columns. The columns can be resized, and their order can be changed (by
dragging). All the changes are recorded when you quit recoll
Hovering over a table row will update the detail area at the bottom of the window with the corresponding values. You can click
the row to freeze the display. The bottom area is equivalent to a result list paragraph, with links for starting a preview or a native
application, and an equivalent right-click menu. Typing Esc (the Escape key) will unfreeze the display.
Running arbitrary commands on result files (1.20 and later)
Apart from the Open and Open With operations, which allow starting an application on a result document (or a temporary copy),
based on its MIME type, it is also possible to run arbitrary commands on results which are top-level files, using the Run Script
entry in the results pop-up menu.
The commands which will appear in the Run Script submenu must be defined by .desktop files inside the scripts subdirectory of the current configuration directory.
Here follows an example of a .desktop file, which could be named for example, ~/.recoll/scripts/myscript.
desktop (the exact file name inside the directory is irrelevant):
[Desktop Entry]
Exec=/home/me/bin/tryscript %F
The Name attribute defines the label which will appear inside the Run Script menu. The Exec attribute defines the program to
be run, which does not need to actually be a script, of course. The MimeType attribute is not used, but needs to exist.
The commands defined this way can also be used from links inside the result paragraph.
As an example, it might make sense to write a script which would move the document to the trash and purge it from the Recoll
Recoll user manual
15 / 56
Displaying thumbnails
The default format for the result list entries and the detail area of the result table display an icon for each result document. The
icon is either a generic one determined from the MIME type, or a thumbnail of the document appearance. Thumbnails are only
displayed if found in the standard freedesktop location, where they would typically have been created by a file manager.
Recoll has no capability to create thumbnails. A relatively simple trick is to use the Open parent document/folder entry in the
result list popup menu. This should open a file manager window on the containing directory, which should in turn create the
thumbnails (depending on your settings). Restarting the search should then display the thumbnails.
There are also some pointers about thumbnail generation on the Recoll wiki.
The preview window
The preview window opens when you first click a Preview link inside the result list.
Subsequent preview requests for a given search open new tabs in the existing window (except if you hold the Shift key while
clicking which will open a new window for side by side viewing).
Starting another search and requesting a preview will create a new preview window. The old one stays open until you close it.
You can close a preview tab by typing Ctrl-W (Ctrl + W) in the window. Closing the last tab for a window will also close the
Of course you can also close a preview window by using the window manager button in the top of the frame.
You can display successive or previous documents from the result list inside a preview tab by typing Shift+Down or Shift+Up
(Down and Up are the arrow keys).
A right-click menu in the text area allows switching between displaying the main text or the contents of fields associated to the
document (ie: author, abtract, etc.). This is especially useful in cases where the term match did not occur in the main text but in
one of the fields. In the case of images, you can switch between three displays: the image itself, the image metadata as extracted
by exiftool and the fields, which is the metadata stored in the index.
You can print the current preview window contents by typing Ctrl-P (Ctrl + P) in the window text.
Searching inside the preview
The preview window has an internal search capability, mostly controlled by the panel at the bottom of the window, which works
in two modes: as a classical editor incremental search, where we look for the text entered in the entry zone, or as a way to walk
the matches between the document and the Recoll query that found it.
Incremental text search The preview tabs have an internal incremental search function. You initiate the search either by typing
a / (slash) or CTL-F inside the text area or by clicking into the Search for: text field and entering the search string. You
can then use the Next and Previous buttons to find the next/previous occurrence. You can also type F3 inside the text area
to get to the next occurrence.
If you have a search string entered and you use Ctrl-Up/Ctrl-Down to browse the results, the search is initiated for each
successive document. If the string is found, the cursor will be positioned at the first occurrence of the search string.
Walking the match lists If the entry area is empty when you click the Next or Previous buttons, the editor will be scrolled to
show the next match to any search term (the next highlighted zone). If you select a search group from the dropdown list
and click Next or Previous, the match list for this group will be walked. This is not the same as a text search, because the
occurences will include non-exact matches (as caused by stemming or wildcards). The search will revert to the text mode
as soon as you edit the entry area.
Recoll user manual
16 / 56
The Query Fragments window
Selecting the Tools → Query Fragments menu entry will open a window with radio- and check-buttons which can be used to
activate query language fragments for filtering the current query. This can be useful if you have frequent reusable selectors, for
example, filtering on alternate directories, or searching just one category of files, not covered by the standard category selectors.
The contents of the window are entirely customizable, and defined by the contents of the fragbuts.xml file inside the configuration directory. The sample file distributed with Recoll (which you should be able to find under /usr/share/recoll/
examples/fragbuts.xml), contains an example which filters the results from the WEB history.
Here follows an example:
<?xml version="1.0" encoding="UTF-8"?>
<fragbuts version="1.0">
<label>Include Web Results</label>
<label>Exclude Web Results</label>
<label>Only Web Results</label>
<label>Year 2010</label>
<label>My Great Directory Only</label>
Each radiobuttons or buttons section defines a line of checkbuttons or radiobuttons inside the window. Any number of
buttons can be selected, but the radiobuttons in a line are exclusive.
Each fragbut section defines the label for a button, and the Query Language fragment which will be added (as an AND filter)
before performing the query if the button is active.
This feature is new in Recoll 1.20, and will probably be refined depending on user feedback.
Complex/advanced search
The advanced search dialog helps you build more complex queries without memorizing the search language constructs. It can be
opened through the Tools menu or through the main toolbar.
Recoll user manual
17 / 56
Recoll keeps a history of searches. See Advanced search history.
The dialog has two tabs:
1. The first tab lets you specify terms to search for, and permits specifying multiple clauses which are combined to build the
2. The second tab lets filter the results according to file size, date of modification, MIME type, or location.
Click on the Start Search button in the advanced search dialog, or type Enter in any text field to start the search. The button in
the main window always performs a simple search.
Click on the Show query details link at the top of the result page to see the query expansion.
Avanced search: the "find" tab
This part of the dialog lets you constructc a query by combining multiple clauses of different types. Each entry field is configurable for the following modes:
• All terms.
• Any term.
• None of the terms.
• Phrase (exact terms in order within an adjustable window).
• Proximity (terms in any order within an adjustable window).
• Filename search.
Additional entry fields can be created by clicking the Add clause button.
When searching, the non-empty clauses will be combined either with an AND or an OR conjunction, depending on the choice
made on the left (All clauses or Any clause).
Entries of all types except "Phrase" and "Near" accept a mix of single words and phrases enclosed in double quotes. Stemming
and wildcard expansion will be performed as for simple search.
Phrases and Proximity searches These two clauses work in similar ways, with the difference that proximity searches do not
impose an order on the words. In both cases, an adjustable number (slack) of non-matched words may be accepted between the
searched ones (use the counter on the left to adjust this count). For phrases, the default count is zero (exact match). For proximity
it is ten (meaning that two search terms, would be matched if found within a window of twelve words). Examples: a phrase
search for quick fox with a slack of 0 will match quick fox but not quick brown fox. With a slack of 1 it will match
the latter, but not fox quick. A proximity search for quick fox with the default slack will match the latter, and also a
fox is a cunning and quick animal.
Avanced search: the "filter" tab
This part of the dialog has several sections which allow filtering the results of a search according to a number of criteria
• The first section allows filtering by dates of last modification. You can specify both a minimum and a maximum date. The
initial values are set according to the oldest and newest documents found in the index.
• The next section allows filtering the results by file size. There are two entries for minimum and maximum size. Enter decimal
numbers. You can use suffix multipliers: k/K, m/M, g/G, t/T for 1E3, 1E6, 1E9, 1E12 respectively.
• The next section allows filtering the results by their MIME types, or MIME categories (ie: media/text/message/etc.).
You can transfer the types between two boxes, to define which will be included or excluded by the search.
The state of the file type selection can be saved as the default (the file type filter will not be activated at program start-up, but
the lists will be in the restored state).
Recoll user manual
18 / 56
• The bottom section allows restricting the search results to a sub-tree of the indexed area. You can use the Invert checkbox to
search for files not in the sub-tree instead. If you use directory filtering often and on big subsets of the file system, you may
think of setting up multiple indexes instead, as the performance may be better.
You can use relative/partial paths for filtering. Ie, entering dirA/dirB would match either /dir1/dirA/dirB/myfile1
or /dir2/dirA/dirB/someother/myfile2.
Avanced search history
The advanced search tool memorizes the last 100 searches performed. You can walk the saved searches by using the up and down
arrow keys while the keyboard focus belongs to the advanced search dialog.
The complex search history can be erased, along with the one for simple search, by selecting the File → Erase Search History
menu entry.
The term explorer tool
Recoll automatically manages the expansion of search terms to their derivatives (ie: plural/singular, verb inflections). But there
are other cases where the exact search term is not known. For example, you may not remember the exact spelling, or only know
the beginning of the name.
The search will only propose replacement terms with spelling variations when no matching document were found. In some cases,
both proper spellings and mispellings are present in the index, and it may be interesting to look for them explicitely.
The term explorer tool (started from the toolbar icon or from the Term explorer entry of the Tools menu) can be used to search
the full index terms list. It has three modes of operations:
Wildcard In this mode of operation, you can enter a search string with shell-like wildcards (*, ?, []). ie: xapi* would display
all index terms beginning with xapi. (More about wildcards here).
Regular expression This mode will accept a regular expression as input. Example: word[0-9]+. The expression is implicitely
anchored at the beginning. Ie: press will match pression but not expression. You can use .*press to match the
latter, but be aware that this will cause a full index term list scan, which can be quite long.
Stem expansion This mode will perform the usual stem expansion normally done as part user input processing. As such it is
probably mostly useful to demonstrate the process.
Spelling/Phonetic In this mode, you enter the term as you think it is spelled, and Recoll will do its best to find index terms that
sound like your entry. This mode uses the Aspell spelling application, which must be installed on your system for things to
work (if your documents contain non-ascii characters, Recoll needs an aspell version newer than 0.60 for UTF-8 support).
The language which is used to build the dictionary out of the index terms (which is done at the end of an indexing pass) is
the one defined by your NLS environment. Weird things will probably happen if languages are mixed up.
Note that in cases where Recoll does not know the beginning of the string to search for (ie a wildcard expression like *coll),
the expansion can take quite a long time because the full index term list will have to be processed. The expansion is currently
limited at 10000 results for wildcards and regular expressions. It is possible to change the limit in the configuration file.
Double-clicking on a term in the result list will insert it into the simple search entry field. You can also cut/paste between the
result list and any entry field (the end of lines will be taken care of).
Multiple indexes
See the section describing the use of multiple indexes for generalities. Only the aspects concerning the recoll GUI are described
A recoll program instance is always associated with a specific index, which is the one to be updated when requested from the
File menu, but it can use any number of Recoll indexes for searching. The external indexes can be selected through the external
indexes tab in the preferences dialog.
Recoll user manual
19 / 56
Index selection is performed in two phases. A set of all usable indexes must first be defined, and then the subset of indexes
to be used for searching. These parameters are retained across program executions (there are kept separately for each Recoll
configuration). The set of all indexes is usually quite stable, while the active ones might typically be adjusted quite frequently.
The main index (defined by RECOLL_CONFDIR) is always active. If this is undesirable, you can set up your base configuration
to index an empty directory.
When adding a new index to the set, you can select either a Recoll configuration directory, or directly a Xapian index directory.
In the first case, the Xapian index directory will be obtained from the selected configuration.
As building the set of all indexes can be a little tedious when done through the user interface, you can use the RECOLL_EXTRA
_DBS environment variable to provide an initial set. This might typically be set up by a system administrator so that every user
does not have to do it. The variable should define a colon-separated list of index directories, ie:
export RECOLL_EXTRA_DBS=/some/place/xapiandb:/some/other/db
Another environment variable, RECOLL_ACTIVE_EXTRA_DBS allows adding to the active list of indexes. This variable was
suggested and implemented by a Recoll user. It is mostly useful if you use scripts to mount external volumes with Recoll
indexes. By using RECOLL_EXTRA_DBS and RECOLL_ACTIVE_EXTRA_DBS, you can add and activate the index for the
mounted volume when starting recoll.
RECOLL_ACTIVE_EXTRA_DBS is available for Recoll versions 1.17.2 and later. A change was made in the same update so
that recoll will automatically deactivate unreachable indexes when starting up.
Document history
Documents that you actually view (with the internal preview or an external tool) are entered into the document history, which is
You can display the history list by using the Tools/Doc History menu entry.
You can erase the document history by using the Erase document history entry in the File menu.
Sorting search results and collapsing duplicates
The documents in a result list are normally sorted in order of relevance. It is possible to specify a different sort order, either by
using the vertical arrows in the GUI toolbox to sort by date, or switching to the result table display and clicking on any header.
The sort order chosen inside the result table remains active if you switch back to the result list, until you click one of the vertical
arrows, until both are unchecked (you are back to sort by relevance).
Sort parameters are remembered between program invocations, but result sorting is normally always inactive when the program
starts. It is possible to keep the sorting activation state between program invocations by checking the Remember sort activation
state option in the preferences.
It is also possible to hide duplicate entries inside the result list (documents with the exact same contents as the displayed one).
The test of identity is based on an MD5 hash of the document container, not only of the text contents (so that ie, a text document
with an image added will not be a duplicate of the text only). Duplicates hiding is controlled by an entry in the GUI configuration
dialog, and is off by default.
As of release 1.19, when a result document does have undisplayed duplicates, a Dups link will be shown with the result list
entry. Clicking the link will display the paths (URLs + ipaths) for the duplicate entries.
Search tips, shortcuts
Terms and search expansion
Term completion Typing Esc Space in the simple search entry field while entering a word will either complete the current word
if its beginning matches a unique term in the index, or open a window to propose a list of completions.
Recoll user manual
20 / 56
Picking up new terms from result or preview text Double-clicking on a word in the result list or in a preview window will
copy it to the simple search entry field.
Wildcards Wildcards can be used inside search terms in all forms of searches. More about wildcards.
Automatic suffixes Words like odt or ods can be automatically turned into query language ext:xxx clauses. This can be
enabled in the Search preferences panel in the GUI.
Disabling stem expansion Entering a capitalized word in any search field will prevent stem expansion (no search for garden
ing if you enter Garden instead of garden). This is the only case where character case should make a difference for a Recoll
search. You can also disable stem expansion or change the stemming language in the preferences.
Finding related documents Selecting the Find similar documents entry in the result list paragraph right-click menu will select
a set of "interesting" terms from the current result, and insert them into the simple search entry field. You can then possibly edit
the list and start a search to find documents which may be apparented to the current result.
File names File names are added as terms during indexing, and you can specify them as ordinary terms in normal search
fields (Recoll used to index all directories in the file path as terms. This has been abandoned as it did not seem really useful).
Alternatively, you can use the specific file name search which will only look for file names, and may be faster than the generic
search especially when using wildcards.
Working with phrases and proximity
Phrases and Proximity searches A phrase can be looked for by enclosing it in double quotes. Example: "user manual"
will look only for occurrences of user immediately followed by manual. You can use the This phrase field of the advanced
search dialog to the same effect. Phrases can be entered along simple terms in all simple or advanced search entry fields (except
This exact phrase).
AutoPhrases This option can be set in the preferences dialog. If it is set, a phrase will be automatically built and added to simple
searches when looking for Any terms. This will not change radically the results, but will give a relevance boost to the results
where the search terms appear as a phrase. Ie: searching for virtual reality will still find all documents where either
virtual or reality or both appear, but those which contain virtual reality should appear sooner in the list.
Phrase searches can strongly slow down a query if most of the terms in the phrase are common. This is why the autophrase
option is off by default for Recoll versions before 1.17. As of version 1.17, autophrase is on by default, but very common
terms will be removed from the constructed phrase. The removal threshold can be adjusted from the search preferences.
Phrases and abbreviations As of Recoll version 1.17, dotted abbreviations like I.B.M. are also automatically indexed as a
word without the dots: IBM. Searching for the word inside a phrase (ie: "the IBM company") will only match the dotted
abrreviation if you increase the phrase slack (using the advanced search panel control, or the o query language modifier). Literal
occurences of the word will be matched normally.
Using fields You can use the query language and field specifications to only search certain parts of documents. This can be
especially helpful with email, for example only searching emails from a specific originator: search tips from:helpful
Ajusting the result table columns When displaying results in table mode, you can use a right click on the table headers to
activate a pop-up menu which will let you adjust what columns are displayed. You can drag the column headers to adjust their
order. You can click them to sort by the field displayed in the column. You can also save the result list in CSV format.
Changing the GUI geometry It is possible to configure the GUI in wide form factor by dragging the toolbars to one of the sides
(their location is remembered between sessions), and moving the category filters to a menu (can be set in the Preferences → GUI
configuration → User interface panel).
Query explanation You can get an exact description of what the query looked for, including stem expansion, and Boolean
operators used, by clicking on the result list header.
Advanced search history As of Recoll 1.18, you can display any of the last 100 complex searches performed by using the up
and down arrow keys while the advanced search panel is active.
Recoll user manual
21 / 56
Browsing the result list inside a preview window Entering Shift-Down or Shift-Up (Shift + an arrow key) in a preview window
will display the next or the previous document from the result list. Any secondary search currently active will be executed on the
new document.
Scrolling the result list from the keyboard You can use PageUp and PageDown to scroll the result list, Shift+Home to go
back to the first page. These work even while the focus is in the search entry.
Result table: moving the focus to the table You can use Ctrl-r to move the focus from the search entry to the table, and then
use the arrow keys to change the current row. Ctrl-Shift-s returns to the search.
Result table: open / preview With the focus in the result table, you can use Ctrl-o to open the document from the current row,
Ctrl-Shift-o to open the document and close recoll, Ctrl-d to preview the document.
Editing a new search while the focus is not in the search entry You can use the Ctrl-Shift-S shortcut to return the cursor to
the search entry (and select the current search text), while the focus is anywhere in the main window.
Forced opening of a preview window You can use Shift+Click on a result list Preview link to force the creation of a preview
window instead of a new tab in the existing one.
Closing previews Entering Ctrl-W in a tab will close it (and, for the last tab, close the preview window). Entering Esc will close
the preview window and all its tabs.
Printing previews Entering Ctrl-P in a preview window will print the currently displayed text.
Quitting Entering Ctrl-Q almost anywhere will close the application.
Saving and restoring queries (1.21 and later)
Both simple and advanced query dialogs save recent history, but the amount is limited: old queries will eventually be forgotten.
Also, important queries may be difficult to find among others. This is why both types of queries can also be explicitely saved to
files, from the GUI menus: File → Save last query / Load last query
The default location for saved queries is a subdirectory of the current configuration directory, but saved queries are ordinary files
and can be written or moved anywhere.
Some of the saved query parameters are part of the preferences (e.g. autophrase or the active external indexes), and may
differ when the query is loaded from the time it was saved. In this case, Recoll will warn of the differences, but will not change
the user preferences.
Customizing the search interface
You can customize some aspects of the search interface by using the GUI configuration entry in the Preferences menu.
There are several tabs in the dialog, dealing with the interface itself, the parameters used for searching and returning results, and
what indexes are searched.
User interface parameters:
• Highlight color for query terms: Terms from the user query are highlighted in the result list samples and the preview window.
The color can be chosen here. Any Qt color string should work (ie red, #ff0000). The default is blue.
• Style sheet: The name of a Qt style sheet text file which is applied to the whole Recoll application on startup. The default
value is empty, but there is a skeleton style sheet (recoll.qss) inside the /usr/share/recoll/examples directory.
Using a style sheet, you can change most recoll graphical parameters: colors, fonts, etc. See the sample file for a few simple
You should be aware that parameters (e.g.: the background color) set inside the Recoll GUI style sheet will override global
system preferences, with possible strange side effects: for example if you set the foreground to a light color and the background
to a dark one in the desktop preferences, but only the background is set inside the Recoll style sheet, and it is light too, then
text will appear light-on-light inside the Recoll GUI.
• Maximum text size highlighted for preview Inserting highlights on search term inside the text before inserting it in the preview
window involves quite a lot of processing, and can be disabled over the given text size to speed up loading.
Recoll user manual
22 / 56
• Prefer HTML to plain text for preview if set, Recoll will display HTML as such inside the preview window. If this causes
problems with the Qt HTML display, you can uncheck it to display the plain text version instead.
• Plain text to HTML line style: when displaying plain text inside the preview window, Recoll tries to preserve some of the
original text line breaks and indentation. It can either use PRE HTML tags, which will well preserve the indentation but will
force horizontal scrolling for long lines, or use BR tags to break at the original line breaks, which will let the editor introduce
other line breaks according to the window width, but will lose some of the original indentation. The third option has been
available in recent releases and is probably now the best one: use PRE tags with line wrapping.
• Choose editor applicationsr: this opens a dialog which allows you to select the application to be used to open each MIME type.
The default is nornally to use the xdg-open utility, but you can override it.
• Exceptions: even wen xdg-open is used by default for opening documents, you can set exceptions for MIME types that will
still be opened according to Recoll preferences. This is useful for passing parameters like page numbers or search strings to
applications that support them (e.g. evince). This cannot be done with xdg-open which only supports passing one parameter.
• Document filter choice style: this will let you choose if the document categories are displayed as a list or a set of buttons, or a
• Start with simple search mode: this lets you choose the value of the simple search type on program startup. Either a fixed value
(e.g. Query Language, or the value in use when the program last exited.
• Auto-start simple search on white space entry: if this is checked, a search will be executed each time you enter a space in the
simple search input field. This lets you look at the result list as you enter new terms. This is off by default, you may like it or
• Start with advanced search dialog open : If you use this dialog frequently, checking the entries will get it to open when recoll
• Remember sort activation state if set, Recoll will remember the sort tool stat between invocations. It normally starts with
sorting disabled.
Result list parameters:
• Number of results in a result page
• Result list font: There is quite a lot of information shown in the result list, and you may want to customize the font and/or font
size. The rest of the fonts used by Recoll are determined by your generic Qt config (try the qtconfig command).
• Edit result list paragraph format string: allows you to change the presentation of each result list entry. See the result list
customisation section.
• Edit result page HTML header insert: allows you to define text inserted at the end of the result page HTML header. More detail
in the result list customisation section.
• Date format: allows specifying the format used for displaying dates inside the result list. This should be specified as an
strftime() string (man strftime).
• Abstract snippet separator: for synthetic abstracts built from index data, which are usually made of several snippets from
different parts of the document, this defines the snippet separator, an ellipsis by default.
Search parameters:
• Hide duplicate results: decides if result list entries are shown for identical documents found in different places.
• Stemming language: stemming obviously depends on the document’s language. This listbox will let you chose among the
stemming databases which were built during indexing (this is set in the main configuration file), or later added with recollindex
-s (See the recollindex manual). Stemming languages which are dynamically added will be deleted at the next indexing pass
unless they are also added in the configuration file.
Recoll user manual
23 / 56
• Automatically add phrase to simple searches: a phrase will be automatically built and added to simple searches when looking
for Any terms. This will give a relevance boost to the results where the search terms appear as a phrase (consecutive and in
• Autophrase term frequency threshold percentage: very frequent terms should not be included in automatic phrase searches for
performance reasons. The parameter defines the cutoff percentage (percentage of the documents where the term appears).
• Replace abstracts from documents: this decides if we should synthesize and display an abstract in place of an explicit abstract
found within the document itself.
• Dynamically build abstracts: this decides if Recoll tries to build document abstracts (lists of snippets) when displaying the
result list. Abstracts are constructed by taking context from the document information, around the search terms.
• Synthetic abstract size: adjust to taste...
• Synthetic abstract context words: how many words should be displayed around each term occurrence.
• Query language magic file name suffixes: a list of words which automatically get turned into ext:xxx file name suffix clauses
when starting a query language query (ie: doc xls xlsx...). This will save some typing for people who use file types a
lot when querying.
External indexes:
This panel will let you browse for additional indexes that you may want to search. External indexes are designated by their
database directory (ie: /home/someothergui/.recoll/xapiandb, /usr/local/recollglobal/xapiandb).
Once entered, the indexes will appear in the External indexes list, and you can chose which ones you want to use at any moment
by checking or unchecking their entries.
Your main database (the one the current configuration indexes to), is always implicitly active. If this is not desirable, you can set
up your configuration so that it indexes, for example, an empty directory. An alternative indexer may also need to implement a
way of purging the index from stale data,
The result list format
Newer versions of Recoll (from 1.17) normally use WebKit HTML widgets for the result list and the snippets window (this may
be disabled at build time). Total customisation is possible with full support for CSS and Javascript. Conversely, there are limits
to what you can do with the older Qt QTextBrowser, but still, it is possible to decide what data each result will contain, and how
it will be displayed.
The result list presentation can be exhaustively customized by adjusting two elements:
• The paragraph format
• HTML code inside the header section. For versions 1.21 and later, this is also used for the snippets window
The paragraph format and the header fragment can be edited from the Result list tab of the GUI configuration.
The header fragment is used both for the result list and the snippets window. The snippets list is a table and has a snippets
class attribute. Each paragraph in the result list is a table, with class respar, but this can be changed by editing the paragraph
There are a few examples on the page about customising the result list on the Recoll web site.
The paragraph format
This is an arbitrary HTML string where the following printf-like % substitutions will be performed:
• %A Abstract
• %D Date
Recoll user manual
24 / 56
• %I Icon image name. This is normally determined from the MIME type. The associations are defined inside the mimeconf
configuration file. If a thumbnail for the file is found at the standard Freedesktop location, this will be displayed instead.
• %K Keywords (if any)
• %L Precooked Preview, Edit, and possibly Snippets links
• %M MIME type
• %N result Number inside the result page
• %P Parent folder Url. In the case of an embedded document, this is the parent folder for the top level container file.
• %R Relevance percentage
• %S Size information
• %T Title or Filename if not set.
• %t Title or Filename if not set.
• %U Url
The format of the Preview, Edit, and Snippets links is <a href="P%N">, <a href="E%N"> and <a href="A%N"> where
docnum (%N) expands to the document number inside the result page).
A link target defined as "F%N" will open the document corresponding to the %P parent folder expansion, usually creating a file
manager window on the folder where the container file resides. E.g.:
<a href="F%N">%P</a>
A link target defined as R%N|scriptname will run the corresponding script on the result file (if the document is embedded, the
script will be started on the top-level parent). See the section about defining scripts.
In addition to the predefined values above, all strings like %(fieldname) will be replaced by the value of the field named
fieldname for this document. Only stored fields can be accessed in this way, the value of indexed but not stored fields is not
known at this point in the search process (see field configuration). There are currently very few fields stored by default, apart
from the values above (only author and filename), so this feature will need some custom local configuration to be useful.
An example candidate would be the recipient field which is generated by the message input handlers.
The default value for the paragraph format string is:
"<table class=\"respar\">\n"
"<td><a href=’%U’><img src=’%I’ width=’64’></a></td>\n"
"<td>%L &nbsp;<i>%S</i> &nbsp;&nbsp;<b>%T</b><br>\n"
"<span style=’white-space:nowrap’><i>%M</i>&nbsp;%D</span>&nbsp;&nbsp;&nbsp; <i>%U</i>& ←nbsp;%i<br>\n"
"%A %K</td>\n"
You may, for example, try the following for a more web-like experience:
<u><b><a href="P%N">%T</a></b></u><br>
%A<font color=#008000>%U - %S</font> - %L
Note that the P%N link in the above paragraph makes the title a preview link. Or the clean looking:
<img src="%I" align="left">%L <font color="#900000">%R</font>
<font color="#808080"><i>%U</i></font>
<table bgcolor="#e0e0e0">
These samples, and some others are on the web site, with pictures to show how they look.
It is also possible to define the value of the snippet separator inside the abstract section.
Recoll user manual
25 / 56
Searching with the KDE KIO slave
What’s this
The Recoll KIO slave allows performing a Recoll search by entering an appropriate URL in a KDE open dialog, or with an
HTML-based interface displayed in Konqueror.
The HTML-based interface is similar to the Qt-based interface, but slightly less powerful for now. Its advantage is that you can
perform your search while staying fully within the KDE framework: drag and drop from the result list works normally and you
have your normal choice of applications for opening files.
The alternative interface uses a directory view of search results. Due to limitations in the current KIO slave interface, it is
currently not obviously useful (to me).
The interface is described in more detail inside a help file which you can access by entering recoll:/ inside the konqueror
URL line (this works only if the recoll KIO slave has been previously installed).
The instructions for building this module are located in the source tree. See: kde/kio/recoll/00README.txt. Some
Linux distributions do package the kio-recoll module, so check before diving into the build process, maybe it’s already out there
ready for one-click installation.
Searchable documents
As a sample application, the Recoll KIO slave could allow preparing a set of HTML documents (for example a manual) so that
they become their own search interface inside konqueror.
This can be done by either explicitly inserting <a href="recoll://..."> links around some document areas, or automatically by adding a very small javascript program to the documents, like the following example, which would initiate a search by
double-clicking any term:
<script language="JavaScript">
function recollsearch() {
var t = document.getSelection();
window.location.href = ’recoll://search/query?qtp=a&p=0&q=’ +
<body ondblclick="recollsearch()">
Searching on the command line
There are several ways to obtain search results as a text stream, without a graphical interface:
• By passing option -t to the recoll program.
• By using the recollq program.
• By writing a custom Python program, using the Recoll Python API.
The first two methods work in the same way and accept/need the same arguments (except for the additional -t to recoll). The
query to be executed is specified as command line arguments.
recollq is not built by default. You can use the Makefile in the query directory to build it. This is a very simple program,
and if you can program a little c++, you may find it useful to taylor its output format to your needs. Not that recollq is only really
useful on systems where the Qt libraries (or even the X11 ones) are not available. Otherwise, just use recoll -t, which takes
the exact same parameters and options which are described for recollq
recollq has a man page (not installed by default, look in the doc/man directory). The Usage string is as follows:
Recoll user manual
26 / 56
recollq: usage:
-P: Show the date span for all the documents present in the index
[-o|-a|-f] [-q] <query string>
Runs a recoll query and displays result lines.
Default: will interpret the argument(s) as a xesam query string
query may be like:
implicit AND, Exclusion, field spec:
t1 -t2 title:t3
OR has priority: t1 OR t2 t3 OR t4 means (t1 OR t2) AND (t3 OR t4)
Phrase: "t1 t2" (needs additional quoting on cmd line)
-o Emulate the GUI simple search in ANY TERM mode
-a Emulate the GUI simple search in ALL TERMS mode
-f Emulate the GUI simple search in filename mode
-q is just ignored (compatibility with the recoll GUI command line)
Common options:
-c <configdir> : specify config directory, overriding $RECOLL_CONFDIR
-d also dump file contents
-n [first-]<cnt> define the result slice. The default value for [first]
is 0. Without the option, the default max count is 2000.
Use n=0 for no limit
-b : basic. Just output urls, no mime types or titles
-Q : no result lines, just the processed query and result count
-m : dump the whole document meta[] array for each result
-A : output the document abstracts
-S fld : sort by field <fld>
-s stemlang : set stemming language to use (must exist in index...)
Use -s "" to turn off stem expansion
-D : sort descending
-i <dbdir> : additional index, several can be given
-e use url encoding (%xx) for urls
-F <field name list> : output exactly these fields for each result.
The field values are encoded in base64, output in one line and
separated by one space character. This is the recommended format
for use by other programs. Use a normal query with option -m to
see the field names.
Sample execution:
recollq ’ilur -nautique mime:text/html’
Recoll query: ((((ilur:(wqf=11) OR ilurs) AND_NOT (nautique:(wqf=11)
OR nautiques OR nautiqu OR nautiquement)) FILTER Ttext/html))
4 results
[ ←comptes.html] 18593
[file:///Users/uncrypted-dockes/projets/nautique/webnautique/articles/ilur1 ←/index.html] [Constructio...
[psxtcl/ ←writemime/recoll]...
[file:///Users/uncrypted-dockes/projets/bateaux/ilur/factEtCie/recu-chasse- ←maree....
Using Synonyms (Recoll 1.22 and later)
There are a number of different uses for synonyms in text search. They can be used at index time (either to increase or decrease
the number of indexed terms), or at query time, to reduce user terms to a set of canonical ones, or to expand queries to match
texts containing synonyms of the user terms.
Only the last approach is used in Recoll. Synonym groups can be defined so that a user query term which is found to be part of a
synonym group will be optionally expanded into an OR query for all synonyms.
Recoll user manual
27 / 56
What is it good for ? The synonyms function is probably not going to help you find your letters to Mr. Smith. It is best used
for domain-specific searches. For example, it was initially suggested by a user performing searches among historical documents:
the synonyms file would contains nicknames and aliases for each of the persons of interest.
In practise, synonym groups are defined inside ordinary text files. Each line in the file defines a group. Example:
hi hello "good morning"
# not sure about "au revoir" though. Is this english ?
bye goodbye "see you" \
"au revoir"
As usual lines beginning with a # are comments, empty lines are ignored, and lines can be continued by ending them with a
The synonyms are searched for matches with user terms after these are stem-expanded, but the contents of the synonyms file
itself is not subjected to stem expansion (1.22). This means that a match will not be found if the form present in the synonyms
file is not present anywhere in the document set.
Multi-word synonyms are supported, but be aware that these will generate phrase queries, which may degrade performance (and
also, no stemming).
A synonyms file can be specified in the GUI preferences, or as an option to recollq.
This feature is new in Recoll 1.22 and will probably need to be refined after some user feedback.
Path translations
In some cases, the document paths stored inside the index do not match the actual ones, so that document previews and accesses
will fail. This can occur in a number of circumstances:
• When using multiple indexes it is a relatively common occurrence that some will actually reside on a remote volume, for
exemple mounted via NFS. In this case, the paths used to access the documents on the local machine are not necessarily the
same than the ones used while indexing on the remote machine. For example, /home/me may have been used as a topdirs
elements while indexing, but the directory might be mounted as /net/server/home/me on the local machine.
• The case may also occur with removable disks. It is perfectly possible to configure an index to live with the documents on the
removable disk, but it may happen that the disk is not mounted at the same place so that the documents paths from the index
are invalid.
• As a last exemple, one could imagine that a big directory has been moved, but that it is currently inconvenient to run the
More generally, the path translation facility may be useful whenever the documents paths seen by the indexer are not the same as
the ones which should be used at query time.
Recoll has a facility for rewriting access paths when extracting the data from the index. The translations can be defined for the
main index and for any additional query index.
In the above NFS example, Recoll could be instructed to rewrite any file:///home/me URL from the index to file:
///net/server/home/me, allowing accesses from the client.
The translations are defined in the ptrans configuration file, which can be edited by hand or from the GUI external indexes
configuration dialog.
Due to a current bug, the GUI must be restarted after changing the ptrans values (even when they were changed from the
Recoll user manual
28 / 56
The query language
The query language processor is activated in the GUI simple search entry when the search mode selector is set to Query Language.
It can also be used with the KIO slave or the command line search. It broadly has the same capabilities as the complex search
interface in the GUI.
The language is based on the (seemingly defunct) Xesam user search language specification.
If the results of a query language search puzzle you and you doubt what has been actually searched for, you can use the GUI
Show Query link at the top of the result list to check the exact query which was finally executed by Xapian.
Here follows a sample request that we are going to explain:
author:"john doe" Beatles OR Lennon Live OR Unplugged -potatoes
This would search for all documents with John Doe appearing as a phrase in the author field (exactly what this is would depend
on the document type, ie: the From: header, for an email message), and containing either beatles or lennon and either live
or unplugged but not potatoes (in any part of the document).
An element is composed of an optional field specification, and a value, separated by a colon (the field separator is the last colon
in the element). Examples: Eugenie, author:balzac, dc:title:grandet dc:title:"eugenie grandet"
The colon, if present, means "contains". Xesam defines other relations, which are mostly unsupported for now (except in special
cases, described further down).
All elements in the search entry are normally combined with an implicit AND. It is possible to specify that elements be OR’ed
instead, as in Beatles OR Lennon. The OR must be entered literally (capitals), and it has priority over the AND associations:
word1 word2 OR word3 means word1 AND (word2 OR word3) not (word1 AND word2) OR word3. Explicit parenthesis are
not supported.
As of Recoll 1.21, you can use parentheses to group elements, which will sometimes make things clearer, and may allow
expressing combinations which would have been difficult otherwise.
An element preceded by a - specifies a term that should not appear.
As usual, words inside quotes define a phrase (the order of words is significant), so that title:"prejudice pride" is not the
same as title:prejudice title:pride, and is unlikely to find a result.
Words inside phrases and capitalized words are not stem-expanded. Wildcards may be used anywhere inside a term. Specifying
a wild-card on the left of a term can produce a very slow search (or even an incorrect one if the expansion is truncated because
of excessive size). Also see More about wildcards.
To save you some typing, recent Recoll versions (1.20 and later) interpret a comma-separated list of terms as an AND list inside
the field. Use slash characters (’/’) for an OR list. No white space is allowed. So
will search for documents with john and lennon inside the author field (in any order), and
would search for john or ringo.
Modifiers can be set on a double-quote value, for example to specify a proximity search (unordered). See the modifier section.
No space must separate the final double-quote and the modifiers value, e.g. "two one"po10
Recoll currently manages the following default fields:
• title, subject or caption are synonyms which specify data to be searched for in the document title or subject.
• author or from for searching the documents originators.
• recipient or to for searching the documents recipients.
• keyword for searching the document-specified keywords (few documents actually have any).
Recoll user manual
29 / 56
• filename for the document’s file name. This is not necessarily set for all documents: internal documents contained inside a
compound one (for example an EPUB section) do not inherit the container file name any more, this was replaced by an explicit
field (see next). Sub-documents can still have a specific filename, if it is implied by the document format, for example the
attachment file name for an email attachment.
• containerfilename. This is set for all documents, both top-level and contained sub-documents, and is always the name
of the filesystem directory entry which contains the data. The terms from this field can only be matched by an explicit field
specification (as opposed to terms from filename which are also indexed as general document content). This avoids getting
matches for all the sub-documents when searching for the container file name.
• ext specifies the file name extension (Ex: ext:html)
Recoll 1.20 and later have a way to specify aliases for the field names, which will save typing, for example by aliasing filename
to fn or containerfilename to cfn. See the section about the fields file
The field syntax also supports a few field-like, but special, criteria:
• dir for filtering the results on file location (Ex: dir:/home/me/somedir). -dir also works to find results not in the
specified directory (release >= 1.15.8). Tilde expansion will be performed as usual (except for a bug in versions 1.19 to
1.19.11p1). Wildcards will be expanded, but please have a look at an important limitation of wildcards in path filters.
Relative paths also make sense, for example, dir:share/doc would match either /usr/share/doc or /usr/local/
Several dir clauses can be specified, both positive and negative. For example the following makes sense:
dir:recoll dir:src -dir:utils -dir:common
This would select results which have both recoll and src in the path (in any order), and which have not either utils or
You can also use OR conjunctions with dir: clauses.
A special aspect of dir clauses is that the values in the index are not transcoded to UTF-8, and never lower-cased or unaccented, but stored as binary. This means that you need to enter the values in the exact lower or upper case, and that searches for
names with diacritics may sometimes be impossible because of character set conversion issues. Non-ASCII UNIX file paths
are an unending source of trouble and are best avoided.
You need to use double-quotes around the path value if it contains space characters.
• size for filtering the results on file size. Example: size<10000. You can use <, > or = as operators. You can specify a range
like the following: size>100 size<1000. The usual k/K, m/M, g/G, t/T can be used as (decimal) multipliers. Ex:
size>1k to search for files bigger than 1000 bytes.
• date for searching or filtering on dates. The syntax for the argument is based on the ISO8601 standard for dates and time
intervals. Only dates are supported, no times. The general syntax is 2 elements separated by a / character. Each element can
be a date or a period of time. Periods are specified as PnYnMnD. The n numbers are the respective numbers of years, months
or days, any of which may be missing. Dates are specified as YYYY -MM -DD . The days and months parts may be missing. If the
/ is present but an element is missing, the missing element is interpreted as the lowest or highest date in the index. Examples:
– 2001-03-01/2002-05-01 the basic syntax for an interval of dates.
– 2001-03-01/P1Y2M the same specified with a period.
– 2001/ from the beginning of 2001 to the latest date in the index.
– 2001 the whole year of 2001
– P2D/ means 2 days ago up to now if there are no documents with dates in the future.
– /2003 all documents from 2003 or older.
Periods can also be specified with small letters (ie: p2y).
• mime or format for specifying the MIME type. These clauses are processed besides the normal Boolean logic of the
search. Multiple values will be OR’ed (instead of the normal AND). You can specify types to be excluded, with the usual , and use wildcards. Example: mime:text/* -mime:text/plain Specifying an explicit boolean operator before a mime
specification is not supported and will produce strange results.
Recoll user manual
30 / 56
• type or rclcat for specifying the category (as in text/media/presentation/etc.). The classification of MIME types in categories is defined in the Recoll configuration (mimeconf), and can be modified or extended. The default category names are
those which permit filtering results in the main GUI screen. Categories are OR’ed like MIME types above, and can be negated
with -.
mime is the only field with an OR default. You do need to use OR with ext terms for example.
The document input handlers used while indexing have the possibility to create other fields with arbitrary names, and aliases may
be defined in the configuration, so that the exact field search possibilities may be different for you if someone took care of the
Some characters are recognized as search modifiers when found immediately after the closing double quote of a phrase, as in
"some term"modifierchars. The actual "phrase" can be a single term of course. Supported modifiers:
• l can be used to turn off stemming (mostly makes sense with p because stemming is off by default for phrases).
• s can be used to turn off synonym expansion, if a synonyms file is in place (only for Recoll 1.22 and later).
• o can be used to specify a "slack" for phrase and proximity searches: the number of additional terms that may be found between
the specified ones. If o is followed by an integer number, this is the slack, else the default is 10.
• p can be used to turn the default phrase search into a proximity one (unordered). Example: "order any in"p
• C will turn on case sensitivity (if the index supports it).
• D will turn on diacritics sensitivity (if the index supports it).
• A weight can be specified for a query element by specifying a decimal value at the start of the modifiers. Example: "Import
Search case and diacritics sensitivity
For Recoll versions 1.18 and later, and when working with a raw index (not the default), searches can be made sensitive to
character case and diacritics. How this happens is controlled by configuration variables and what search data is entered.
The general default is that searches are insensitive to case and diacritics. An entry of resume will match any of Resume,
RESUME, résumé, Résumé etc.
Two configuration variables can automate switching on sensitivity:
autodiacsens If this is set, search sensitivity to diacritics will be turned on as soon as an accented character exists in a search
term. When the variable is set to true, resume will start a diacritics-unsensitive search, but résumé will be matched
exactly. The default value is false.
autocasesens If this is set, search sensitivity to character case will be turned on as soon as an upper-case character exists in a
search term except for the first one. When the variable is set to true, us or Us will start a diacritics-unsensitive search, but
US will be matched exactly. The default value is true (contrary to autodiacsens).
As in the past, capitalizing the first letter of a word will turn off its stem expansion and have no effect on case-sensitivity.
You can also explicitely activate case and diacritics sensitivity by using modifiers with the query language. C will make the term
case-sensitive, and D will make it diacritics-sensitive. Examples:
Recoll user manual
31 / 56
will search for the term us exactly (Us will not be a match).
will search for the term resume exactly (résumé will not be a match).
When either case or diacritics sensitivity is activated, stem expansion is turned off. Having both does not make much sense.
Anchored searches and wildcards
Some special characters are interpreted by Recoll in search strings to expand or specialize the search. Wildcards expand a root
term in controlled ways. Anchor characters can restrict a search to succeed only if the match is found at or near the beginning of
the document or one of its fields.
More about wildcards
All words entered in Recoll search fields will be processed for wildcard expansion before the request is finally executed.
The wildcard characters are:
• * which matches 0 or more characters.
• ? which matches a single character.
• [] which allow defining sets of characters to be matched (ex: [abc] matches a single character which may be ’a’ or ’b’ or
’c’, [0-9] matches any number.
You should be aware of a few things when using wildcards.
• Using a wildcard character at the beginning of a word can make for a slow search because Recoll will have to scan the whole
index term list to find the matches. However, this is much less a problem for field searches, and queries like author:*@ can sometimes be very useful.
• For Recoll version 18 only, when working with a raw index (preserving character case and diacritics), the literal part of a
wildcard expression will be matched exactly for case and diacritics. This is not true any more for versions 19 and later.
• Using a * at the end of a word can produce more matches than you would think, and strange search results. You can use the
term explorer tool to check what completions exist for a given term. You can also see exactly what search was performed by
clicking on the link at the top of the result list. In general, for natural language terms, stem expansion will produce better
results than an ending * (stem expansion is turned off when any wildcard character appears in the term).
Wildcards and path filtering
Due to the way that Recoll processes wildcards inside dir path filtering clauses, they will have a multiplicative effect on the
query size. A clause containg wildcards in several paths elements, like, for example, dir:/home/me/*/*/docdir , will almost
certainly fail if your indexed tree is of any realistic size.
Depending on the case, you may be able to work around the issue by specifying the paths elements more narrowly, with a constant
prefix, or by using 2 separate dir: clauses instead of multiple wildcards, as in dir:/home/me dir:docdir . The latter query
is not equivalent to the initial one because it does not specify a number of directory levels, but that’s the best we can do (and it
may be actually more useful in some cases).
Recoll user manual
32 / 56
Anchored searches
Two characters are used to specify that a search hit should occur at the beginning or at the end of the text. ˆ at the beginning of
a term or phrase constrains the search to happen at the start, $ at the end force it to happen at the end.
As this function is implemented as a phrase search it is possible to specify a maximum distance at which the hit should occur,
either through the controls of the advanced search panel, or using the query language, for example, as in:
which would force someterm to be found within 10 terms of the start of the text. This can be combined with a field search as
in somefield:"ˆsometerm"o10 or somefield:someterm$.
This feature can also be used with an actual phrase search, but in this case, the distance applies to the whole phrase and anchor,
so that, for example, bla bla my unexpected term at the beginning of the text would be a match for "ˆmy term"o5.
Anchored searches can be very useful for searches inside somewhat structured documents like scientific articles, in case explicit
metadata has not been supplied (a most frequent case), for example for looking for matches inside the abstract or the list of
authors (which occur at the top of the document).
Desktop integration
Being independant of the desktop type has its drawbacks: Recoll desktop integration is minimal. However there are a few tools
• The KDE KIO Slave was described in a previous section.
• If you use a recent version of Ubuntu Linux, you may find the Ubuntu Unity Lens module useful.
• There is also an independantly developed Krunner plugin.
Here follow a few other things that may help.
Hotkeying recoll
It is surprisingly convenient to be able to show or hide the Recoll GUI with a single keystroke. Recoll comes with a small Python
script, based on the libwnck window manager interface library, which will allow you to do just this. The detailed instructions are
on this wiki page.
The KDE Kicker Recoll applet
This is probably obsolete now. Anyway:
The Recoll source tree contains the source code to the recoll_applet, a small application derived from the find_applet. This can
be used to add a small Recoll launcher to the KDE panel.
The applet is not automatically built with the main Recoll programs, nor is it included with the main source distribution (because
the KDE build boilerplate makes it relatively big). You can download its source from the download page. Use the
omnipotent configure;make;make install incantation to build and install.
You can then add the applet to the panel by right-clicking the panel and choosing the Add applet entry.
The recoll_applet has a small text window where you can type a Recoll query (in query language form), and an icon which can
be used to restrict the search to certain types of files. It is quite primitive, and launches a new recoll GUI instance every time
(even if it is already running). You may find it useful anyway.
Recoll user manual
33 / 56
Chapter 4
Programming interface
Recoll has an Application Programming Interface, usable both for indexing and searching, currently accessible from the Python
Another less radical way to extend the application is to write input handlers for new types of documents.
The processing of metadata attributes for documents (fields) is highly configurable.
Writing a document input handler
Terminology The small programs or pieces of code which handle the processing of the different document types for Recoll
used to be called filters, which is still reflected in the name of the directory which holds them and many configuration
variables. They were named this way because one of their primary functions is to filter out the formatting directives and keep
the text content. However these modules may have other behaviours, and the term input handler is now progressively
substituted in the documentation. filter is still used in many places though.
Recoll input handlers cooperate to translate from the multitude of input document formats, simple ones as opendocument, acrobat), or compound ones such as Zip or Email, into the final Recoll indexing input format, which is plain text. Most input handlers
are executable programs or scripts. A few handlers are coded in C++ and live inside recollindex. This latter kind will not be
described here.
There are currently (1.18 and since 1.13) two kinds of external executable input handlers:
• Simple exec handlers run once and exit. They can be bare programs like antiword, or scripts using other programs. They are
very simple to write, because they just need to print the converted document to the standard output. Their output can be plain
text or HTML. HTML is usually preferred because it can store metadata fields and it allows preserving some of the formatting
for the GUI preview.
• Multiple execm handlers can process multiple files (sparing the process startup time which can be very significant), or multiple documents per file (e.g.: for zip or chm files). They communicate with the indexer through a simple protocol, but are
nevertheless a bit more complicated than the older kind. Most of new handlers are written in Python, using a common module
to handle the protocol. There is an exception, rclimg which is written in Perl. The subdocuments output by these handlers can
be directly indexable (text or HTML), or they can be other simple or compound documents that will need to be processed by
another handler.
In both cases, handlers deal with regular file system files, and can process either a single document, or a linear list of documents
in each file. Recoll is responsible for performing up to date checks, deal with more complex embedding and other upper level
A simple handler returning a document in text/plain format, can transfer no metadata to the indexer. Generic metadata, like
document size or modification date, will be gathered and stored by the indexer.
Recoll user manual
34 / 56
Handlers that produce text/html format can return an arbitrary amount of metadata inside HTML meta tags. These will be
processed according to the directives found in the fields configuration file.
The handlers that can handle multiple documents per file return a single piece of data to identify each document inside the file.
This piece of data, called an ipath element will be sent back by Recoll to extract the document at query time, for previewing,
or for creating a temporary file to be opened by a viewer.
The following section describes the simple handlers, and the next one gives a few explanations about the execm ones. You could
conceivably write a simple handler with only the elements in the manual. This will not be the case for the other ones, for which
you will have to look at the code.
Simple input handlers
Recoll simple handlers are usually shell-scripts, but this is in no way necessary. Extracting the text from the native format is the
difficult part. Outputting the format expected by Recoll is trivial. Happily enough, most document formats have translators or text
extractors which can be called from the handler. In some cases the output of the translating program is completely appropriate,
and no intermediate shell-script is needed.
Input handlers are called with a single argument which is the source file name. They should output the result to stdout.
When writing a handler, you should decide if it will output plain text or HTML. Plain text is simpler, but you will not be able to
add metadata or vary the output character encoding (this will be defined in a configuration file). Additionally, some formatting
may be easier to preserve when previewing HTML. Actually the deciding factor is metadata: Recoll has a way to extract metadata
from the HTML header and use it for field searches..
The RECOLL_FILTER_FORPREVIEW environment variable (values yes, no) tells the handler if the operation is for indexing
or previewing. Some handlers use this to output a slightly different format, for example stripping uninteresting repeated keywords
(ie: Subject: for email) when indexing. This is not essential.
You should look at one of the simple handlers, for example rclps for a starting point.
Don’t forget to make your handler executable before testing !
"Multiple" handlers
If you can program and want to write an execm handler, it should not be too difficult to make sense of one of the existing
modules. For example, look at rclzip which uses Zip file paths as identifiers (ipath), and rclics, which uses an integer index.
Also have a look at the comments inside the internfile/mh_execm.h file and possibly at the corresponding module.
execm handlers sometimes need to make a choice for the nature of the ipath elements that they use in communication with
the indexer. Here are a few guidelines:
• Use ASCII or UTF-8 (if the identifier is an integer print it, for example, like printf %d would do).
• If at all possible, the data should make some kind of sense when printed to a log file to help with debugging.
• Recoll uses a colon (:) as a separator to store a complex path internally (for deeper embedding). Colons inside the ipath
elements output by a handler will be escaped, but would be a bad choice as a handler-specific separator (mostly, again, for
debugging issues).
In any case, the main goal is that it should be easy for the handler to extract the target document, given the file name and the
ipath element.
execm handlers will also produce a document with a null ipath element. Depending on the type of document, this may have
some associated data (e.g. the body of an email message), or none (typical for an archive file). If it is empty, this document will
be useful anyway for some operations, as the parent of the actual data documents.
Recoll user manual
35 / 56
Telling Recoll about the handler
There are two elements that link a file to the handler which should process it: the association of file to MIME type and the
association of a MIME type with a handler.
The association of files to MIME types is mostly based on name suffixes. The types are defined inside the mimemap file.
.doc = application/msword
If no suffix association is found for the file name, Recoll will try to execute the file -i command to determine a MIME type.
The association of file types to handlers is performed in the mimeconf file. A sample will probably be of better help than a long
application/msword = exec antiword -t -i 1 -m UTF-8;\
mimetype = text/plain ; charset=utf-8
application/ogg = exec rclogg
text/rtf = exec unrtf --nopict --html; charset=iso-8859-1; mimetype=text/html
application/x-chm = execm rclchm
The fragment specifies that:
• application/msword files are processed by executing the antiword program, which outputs text/plain encoded in
• application/ogg files are processed by the rclogg script, with default output type (text/html, with encoding specified
in the header, or utf-8 by default).
• text/rtf is processed by unrtf, which outputs text/html. The iso-8859-1 encoding is specified because it is not the
utf-8 default, and not output by unrtf in the HTML header section.
• application/x-chm is processed by a persistant handler. This is determined by the execm keyword.
Input handler HTML output
The output HTML could be very minimal like the following example:
<meta http-equiv="Content-Type" content="text/html;charset=UTF-8">
Some text content
You should take care to escape some characters inside the text by transforming them into appropriate entities. At the very
minimum, "&" should be transformed into "&amp;", "<" should be transformed into "&lt;". This is not always properly done
by translating programs which output HTML, and of course never by those which output plain text.
When encapsulating plain text in an HTML body, the display of a preview may be improved by enclosing the text inside <pre>
The character set needs to be specified in the header. It does not need to be UTF-8 (Recoll will take care of translating it), but it
must be accurate for good results.
Recoll user manual
36 / 56
Recoll will process meta tags inside the header as possible document fields candidates. Documents fields can be processed by
the indexer in different ways, for searching or displaying inside query results. This is described in a following section.
By default, the indexer will process the standard header fields if they are present: title, meta/description, and meta/
keywords are both indexed and stored for query-time display.
A predefined non-standard meta tag will also be processed by Recoll without further configuration: if a date tag is present and
has the right format, it will be used as the document date (for display and sorting), in preference to the file modification date. The
date format should be as follows:
<meta name="date" content="YYYY-mm-dd HH:MM:SS">
<meta name="date" content="YYYY-mm-ddTHH:MM:SS">
<meta name="date" content="2013-02-24 17:50:00">
Input handlers also have the possibility to "invent" field names. This should also be output as meta tags:
<meta name="somefield" content="Some textual data" />
You can embed HTML markup inside the content of custom fields, for improving the display inside result lists. In this case, add
a (wildly non-standard) markup attribute to tell Recoll that the value is HTML and should not be escaped for display.
<meta name="somefield" markup="html" content="Some <i>textual</i> data" />
As written above, the processing of fields is described in a further section.
Page numbers
The indexer will interpret ˆL characters in the handler output as indicating page breaks, and will record them. At query time, this
allows starting a viewer on the right page for a hit or a snippet. Currently, only the PDF, Postscript and DVI handlers generate
page breaks.
Field data processing
Fields are named pieces of information in or about documents, like title, author, abstract.
The field values for documents can appear in several ways during indexing: either output by input handlers as meta fields in the
HTML header section, or extracted from file extended attributes, or added as attributes of the Doc object when using the API, or
again synthetized internally by Recoll.
The Recoll query language allows searching for text in a specific field.
Recoll defines a number of default fields. Additional ones can be output by handlers, and described in the fields configuration
Fields can be:
• indexed, meaning that their terms are separately stored in inverted lists (with a specific prefix), and that a field-specific search
is possible.
• stored, meaning that their value is recorded in the index data record for the document, and can be returned and displayed
with search results.
A field can be either or both indexed and stored. This and other aspects of fields handling is defined inside the fields
configuration file.
The sequence of events for field processing is as follows:
Recoll user manual
37 / 56
• During indexing, recollindex scans all meta fields in HTML documents (most document types are transformed into HTML at
some point). It compares the name for each element to the configuration defining what should be done with fields (the fields
• If the name for the meta element matches one for a field that should be indexed, the contents are processed and the terms are
entered into the index with the prefix defined in the fields file.
• If the name for the meta element matches one for a field that should be stored, the content of the element is stored with the
document data record, from which it can be extracted and displayed at query time.
• At query time, if a field search is performed, the index prefix is computed and the match is only performed against appropriately
prefixed terms in the index.
• At query time, the field can be displayed inside the result list by using the appropriate directive in the definition of the result
list paragraph format. All fields are displayed on the fields screen of the preview window (which you can reach through the
right-click menu). This is independant of the fact that the search which produced the results used the field or not.
You can find more information in the section about the fields file, or in comments inside the file.
You can also have a look at the example on the Wiki, detailing how one could add a page count field to pdf documents for
displaying inside result lists.
Interface elements
A few elements in the interface are specific and and need an explanation.
udi An udi (unique document identifier) identifies a document. Because of limitations inside the index engine, it is restricted in
length (to 200 bytes), which is why a regular URI cannot be used. The structure and contents of the udi is defined by the
application and opaque to the index engine. For example, the internal file system indexer uses the complete document path
(file path + internal path), truncated to length, the suppressed part being replaced by a hash value.
ipath This data value (set as a field in the Doc object) is stored, along with the URL, but not indexed by Recoll. Its contents are
not interpreted, and its use is up to the application. For example, the Recoll internal file system indexer stores the part of
the document access path internal to the container file (ipath in this case is a list of subdocument sequential numbers).
url and ipath are returned in every search result and permit access to the original document.
Stored and indexed fields The fields file inside the Recoll configuration defines which document fields are either "indexed"
(searchable), "stored" (retrievable with search results), or both.
Data for an external indexer, should be stored in a separate index, not the one for the Recoll internal file system indexer, except
if the latter is not used at all). The reason is that the main document indexer purge pass would remove all the other indexer’s
documents, as they were not seen during indexing. The main indexer documents would also probably be a problem for the
external indexer purge operation.
Python interface
Recoll versions after 1.11 define a Python programming interface, both for searching and indexing. The indexing portion has
seen little use, but the searching one is used in the Recoll Ubuntu Unity Lens and Recoll Web UI.
The API is inspired by the Python database API specification. There were two major changes in recent Recoll versions:
• The basis for the Recoll API changed from Python database API version 1.0 (Recoll versions up to 1.18.1), to version 2.0
(Recoll 1.18.2 and later).
Recoll user manual
38 / 56
• The recoll module became a package (with an internal recoll module) as of Recoll version 1.19, in order to add more
functions. For existing code, this only changes the way the interface must be imported.
We will mostly describe the new API and package structure here. A paragraph at the end of this section will explain a few
differences and ways to write code compatible with both versions.
The Python interface can be found in the source package, under python/recoll.
The python/recoll/ directory contains the usual After configuring the main Recoll code, you can use the
script to build and install the Python module:
cd recoll-xxx/python/recoll
python build
python install
The normal Recoll installer installs the Python API along with the main code.
When installing from a repository, and depending on the distribution, the Python API can sometimes be found in a separate
Recoll package
The recoll package contains two modules:
• The recoll module contains functions and classes used to query (or update) the index.
• The rclextract module contains functions and classes used to access document data.
The recoll module
connect(confdir=None, extra_dbs=None, writable = False) The connect() function connects to one or several Recoll index(es) and returns a Db object.
• confdir may specify a configuration directory. The usual defaults apply.
• extra_dbs is a list of additional indexes (Xapian directories).
• writable decides if we can index new data through this connection.
This call initializes the recoll module, and it should always be performed before any other call or object creation.
The Db class
A Db object is created by a connect() call and holds a connection to a Recoll index.
Db.close() Closes the connection. You can’t do anything with the Db object after this.
Db.query(), Db.cursor() These aliases return a blank Query object for this index.
Db.setAbstractParams(maxchars, contextwords) Set the parameters used to build snippets (sets of keywords in context text
fragments). maxchars defines the maximum total size of the abstract. contextwords defines how many terms are
shown around the keyword.
Db.termMatch(match_type, expr, field=”, maxlen=-1, casesens=False, diacsens=False, lang=’english’) Expand an expression against the index term list. Performs the basic function from the GUI term explorer tool. match_type can be either
of wildcard, regexp or stem. Returns a list of terms expanded from the input expression.
Recoll user manual
39 / 56
The Query class
A Query object (equivalent to a cursor in the Python DB API) is created by a Db.query() call. It is used to execute index
Query.sortby(fieldname, ascending=True) Sort results by fieldname, in ascending or descending order. Must be called
before executing the search.
Query.execute(query_string, stemming=1, stemlang="english") Starts a search for query_string , a Recoll search language string.
Query.executesd(SearchData) Starts a search for the query defined by the SearchData object.
Query.fetchmany(size=query.arraysize) Fetches the next Doc objects in the current search results, and returns them as an
array of the required size, which is by default the value of the arraysize data member.
Query.fetchone() Fetches the next Doc object from the current search results.
Query.close() Closes the query. The object is unusable after the call.
Query.scroll(value, mode=’relative’) Adjusts the position in the current result set. mode can be relative or absolute.
Query.getgroups() Retrieves the expanded query terms as a list of pairs. Meaningful only after executexx In each pair, the first
entry is a list of user terms (of size one for simple terms, or more for group and phrase clauses), the second a list of query
terms as derived from the user terms and used in the Xapian Query.
Query.getxquery() Return the Xapian query description as a Unicode string. Meaningful only after executexx.
Query.highlight(text, ishtml = 0, methods = object) Will insert <span "class=rclmatch">, </span> tags around the match areas
in the input text and return the modified text. ishtml can be set to indicate that the input text is HTML and that HTML
special characters should not be escaped. methods if set should be an object with methods startMatch(i) and endMatch()
which will be called for each match and should return a begin and end tag
Query.makedocabstract(doc, methods = object)) Create a snippets abstract for doc (a Doc object) by selecting text around
the match terms. If methods is set, will also perform highlighting. See the highlight method.
Query.__iter__() and So that things like for doc in query: will work.
Query.arraysize Default number of records processed by fetchmany (r/w).
Query.rowcount Number of records returned by the last execute.
Query.rownumber Next index to be fetched from results. Normally increments after each fetchone() call, but can be set/reset
before the call to effect seeking (equivalent to using scroll()). Starts at 0.
The Doc class
A Doc object contains index data for a given document. The data is extracted from the index when searching, or set by the
indexer program when updating. The Doc object has many attributes to be read or set by its user. It matches exactly the Rcl::Doc
C++ object. Some of the attributes are predefined, but, especially when indexing, others can be set, the name of which will be
processed as field names by the indexing configuration. Inputs can be specified as Unicode or strings. Outputs are Unicode
objects. All dates are specified as Unix timestamps, printed as strings. Please refer to the rcldb/rcldoc.h C++ file for a
description of the predefined attributes.
At query time, only the fields that are defined as stored either by default or in the fields configuration file will be meaningful
in the Doc object. Especially this will not be the case for the document text. See the rclextract module for accessing
document contents.
Recoll user manual
40 / 56
get(key), [] operator Retrieve the named doc attribute
getbinurl() Retrieve the URL in byte array format (no transcoding), for use as parameter to a system call.
items() Return a dictionary of doc object keys/values
keys() list of doc object keys (attribute names).
The SearchData class
A SearchData object allows building a query by combining clauses, for execution by Query.executesd(). It can be
used in replacement of the query language approach. The interface is going to change a little, so no detailed doc for now...
addclause(type=’and’|’or’|’excl’|’phrase’|’near’|’sub’, qstring=string, slack=0, field=”, stemming=1, subSearch=SearchData)
The rclextract module
Index queries do not provide document content (only a partial and unprecise reconstruction is performed to show the snippets
text). In order to access the actual document data, the data extraction part of the indexing process must be performed (subdocument access and format translation). This is not trivial in general. The rclextract module currently provides a single class
which can be used to access the data content for result documents.
The Extractor class
Extractor(doc) An Extractor object is built from a Doc object, output from a query.
Extractor.textextract(ipath) Extract document defined by ipath and return a Doc object. The doc.text field has the document
text converted to either text/plain or text/html according to doc.mimetype. The typical use would be as follows:
qdoc = query.fetchone()
extractor = recoll.Extractor(qdoc)
doc = extractor.textextract(qdoc.ipath)
# use doc.text, e.g. for previewing
Extractor.idoctofile(ipath, targetmtype, outfile=”) Extracts document into an output file, which can be given explicitly or will
be created as a temporary file to be deleted by the caller. Typical use:
qdoc = query.fetchone()
extractor = recoll.Extractor(qdoc)
filename = extractor.idoctofile(qdoc.ipath, qdoc.mimetype)
Example code
The following sample would query the index with a user language string. See the python/samples directory inside the Recoll
source for other examples. The recollgui subdirectory has a very embryonic GUI which demonstrates the highlighting and
data extraction functions.
Recoll user manual
41 / 56
#!/usr/bin/env python
from recoll import recoll
db = recoll.connect()
db.setAbstractParams(maxchars=80, contextwords=4)
query = db.query()
nres = query.execute("some user question")
print "Result count: ", nres
if nres > 5:
nres = 5
for i in range(nres):
doc = query.fetchone()
print "Result #%d" % (query.rownumber,)
for k in ("title", "size"):
print k, ":", getattr(doc, k).encode(’utf-8’)
abs = db.makeDocAbstract(doc, query).encode(’utf-8’)
print abs
Compatibility with the previous version
The following code fragments can be used to ensure that code can run with both the old and the new API (as long as it does not
use the new abilities of the new API of course).
Adapting to the new package structure:
from recoll import recoll
from recoll import rclextract
hasextract = True
import recoll
hasextract = False
Adapting to the change of nature of the next Query member. The same test can be used to choose to use the scroll()
method (new) or set the next value (old).
rownum = if type( == int else \
Recoll user manual
42 / 56
Chapter 5
Installation and configuration
Installing a binary copy
Recoll binary copies are always distributed as regular packages for your system. They can be obtained either through the system’s normal software distribution framework (e.g. Debian/Ubuntu apt, FreeBSD ports, etc.), or from some type of "backports"
repository providing versions newer than the standard ones, or found on the Recoll WEB site in some cases.
There used to exist another form of binary install, as pre-compiled source trees, but these are just less convenient than the
packages and don’t exist any more.
The package management tools will usually automatically deal with hard dependancies for packages obtained from a proper
package repository. You will have to deal with them by hand for downloaded packages (for example, when dpkg complains
about missing dependancies).
In all cases, you will have to check or install supporting applications for the file types that you want to index beyond those that
are natively processed by Recoll (text, HTML, email files, and a few others).
You should also maybe have a look at the configuration section (but this may not be necessary for a quick test with default
parameters). Most parameters can be more conveniently set from the GUI interface.
Supporting packages
Recoll uses external applications to index some file types. You need to install them for the file types that you wish to have indexed
(these are run-time optional dependencies. None is needed for building or running Recoll except for indexing their specific file
After an indexing pass, the commands that were found missing can be displayed from the recoll File menu. The list is stored in
the missing text file inside the configuration directory.
A list of common file types which need external commands follows. Many of the handlers need the iconv command, which is
not always listed as a dependancy.
Please note that, due to the relatively dynamic nature of this information, the most up to date version is now kept on
features.html along with links to the home pages or best source/patches pages, and misc tips. The list below is not updated often
and may be quite stale.
For many Linux distributions, most of the commands listed can be installed from the package repositories. However, the packages
are sometimes outdated, or not the best version for Recoll, so you should take a look at if a
file type is important to you.
As of Recoll release 1.14, a number of XML-based formats that were handled by ad hoc handler code now use the xsltproc
command, which usually comes with libxslt. These are: abiword, fb2 (ebooks), kword, openoffice, svg.
Now for the list:
Recoll user manual
43 / 56
• Openoffice files need unzip and xsltproc.
• PDF files need pdftotext which is part of Poppler (usually comes with the poppler-utils package). Avoid the original
one from Xpdf.
• Postscript files need pstotext. The original version has an issue with shell character in file names, which is corrected in recent
packages. See for more detail.
• MS Word needs antiword. It is also useful to have wvWare installed as it may be be used as a fallback for some files which
antiword does not handle.
• MS Excel and PowerPoint are processed by internal Python handlers.
• MS Open XML (docx) needs xsltproc.
• Wordperfect files need wpd2html from the libwpd (or libwpd-tools on Ubuntu) package.
• RTF files need unrtf, which, in its older versions, has much trouble with non-western character sets. Many Linux distributions
carry outdated unrtf versions. Check for details.
• TeX files need untex or detex. Check for sources if it’s not packaged for your distribution.
• dvi files need dvips.
• djvu files need djvutxt and djvused from the DjVuLibre package.
• Audio files: Recoll releases 1.14 and later use a single Python handler based on mutagen for all audio file types.
• Pictures: Recoll uses the Exiftool Perl package to extract tag information. Most image file formats are supported. Note that
there may not be much interest in indexing the technical tags (image size, aperture, etc.). This is only of interest if you store
personal tags or textual descriptions inside the image files.
• chm: files in Microsoft help format need Python and the pychm module (which needs chmlib).
• ICS: up to Recoll 1.13, iCalendar files need Python and the icalendar module. icalendar is not needed for newer versions,
which use internal code.
• Zip archives need Python (and the standard zipfile module).
• Rar archives need Python, the rarfile Python module and the unrar utility.
• Midi karaoke files need Python and the Midi module
• Konqueror webarchive format with Python (uses the Tarfile module).
• Mimehtml web archive format (support based on the email handler, which introduces some mild weirdness, but still usable).
Text, HTML, email folders, and Scribus files are processed internally. Lyx is used to index Lyx files. Many handlers need iconv
and the standard sed and awk.
Building from source
If you can install any or all of the following through the package manager for your system, all the better. Especially Qt is a very
big piece of software, but you will most probably be able to find a binary package.
You may have to compile Xapian but this is easy.
The shopping list:
• The autoconf, automake and libtool triad. Only autoconf is needed up to Recoll 1.21.
Recoll user manual
44 / 56
• C++ compiler. Up to Recoll version 1.13.04, its absence can manifest itself by strange messages about a missing iconv_open.
• bison command (for Recoll 1.21 and later).
• xsltproc command. For building the documentation (for Recoll 1.21 and later). This sometimes comes with the libxslt
package. And also the Docbook XML and style sheet files.
• Development files for Xapian core.
If you are building Xapian for an older CPU (before Pentium 4 or Athlon 64), you need to add the --disable-sse
flag to the configure command. Else all Xapian application will crash with an illegal instruction error.
• Development files for Qt 4 . Recoll has not been tested with Qt 5 yet. Recoll 1.15.9 was the last version to support Qt 3. If you
do not want to install or build the Qt Webkit module, Recoll has a configuration option to disable its use (see further).
• Development files for X11 and zlib.
• Development files for Python (or use --disable-python-module).
• You may also need libiconv. On Linux systems, the iconv interface is part of libc and you should not need to do anything
Check the Recoll download page for up to date version information.
Recoll has been built on Linux, FreeBSD, Mac OS X, and Solaris, most versions after 2005 should be ok, maybe some older
ones too (Solaris 8 is ok). If you build on another system, and need to modify things, I would very much welcome patches.
Configure options:
• --without-aspell will disable the code for phonetic matching of search terms.
• --with-fam or --with-inotify will enable the code for real time indexing. Inotify support is enabled by default on
recent Linux systems.
• --with-qzeitgeist will enable sending Zeitgeist events about the visited search results, and needs the qzeitgeist package.
• --disable-webkit is available from version 1.17 to implement the result list with a Qt QTextBrowser instead of a WebKit
widget if you do not or can’t depend on the latter.
• --disable-idxthreads is available from version 1.19 to suppress multithreading inside the indexing process. You can
also use the run-time configuration to restrict recollindex to using a single thread, but the compile-time option may disable a
few more unused locks. This only applies to the use of multithreading for the core index processing (data input). The Recoll
monitor mode always uses at least two threads of execution.
• --disable-python-module will avoid building the Python module.
• --disable-xattr will prevent fetching data from file extended attributes. Beyond a few standard attributes, fetching
extended attributes data can only be useful is some application stores data in there, and also needs some simple configuration
(see comments in the fields configuration file).
• --enable-camelcase will enable splitting camelCase words. This is not enabled by default as it has the unfortunate sideeffect of making some phrase searches quite confusing: ie, "MySQL manual" would be matched by "MySQL manual"
and "my sql manual" but not "mysql manual" (only inside phrase searches).
• --with-file-command Specify the version of the ’file’ command to use (ie: --with-file-command=/usr/local/bin/file).
Can be useful to enable the gnu version on systems where the native one is bad.
Recoll user manual
45 / 56
• --disable-qtgui Disable the Qt interface. Will allow building the indexer and the command line search program in
absence of a Qt environment.
• --disable-x11mon Disable X11 connection monitoring inside recollindex. Together with --disable-qtgui, this allows
building recoll without Qt and X11.
• --disable-userdoc will avoid building the user manual. This avoids having to install the Docbook XML/XSL files and
the TeX toolchain used for translating the manual to PDF.
• --disable-pic (Recoll versions up to 1.21 only) will compile Recoll with position-dependant code. This is incompatible
with building the KIO or the Python or PHP extensions, but might yield very marginally faster code.
• Of course the usual autoconf configure options, like --prefix apply.
Normal procedure (for source extracted from a tar distribution):
cd recoll-xxx
(practices usual hardship-repelling invocations)
When building from source cloned from the BitBucket repository, you also need to install autoconf, automake, and libtool and
you must execute sh in the top source directory before running configure.
Building on Solaris
We did not test building the GUI on Solaris for recent versions. You will need at least Qt 4.4. There are some hints on an old
web site page, they may still be valid.
Someone did test the 1.19 indexer and Python module build, they do work, with a few minor glitches. Be sure to use GNU make
and install.
Either type make install or execute recollinstall prefix , in the root of the source tree. This will copy the commands to prefix /bin and the sample configuration files, scripts and other shared data to prefix /share/recoll.
If the installation prefix given to recollinstall is different from either the system default or the value which was specified when executing configure (as in configure --prefix /some/path), you will have to set the RECOLL_DATADIR environment
variable to indicate where the shared data is to be found (ie for (ba)sh: export RECOLL_DATADIR=/some/path/share/recoll
You can then proceed to configuration.
Configuration overview
Most of the parameters specific to the recoll GUI are set through the Preferences menu and stored in the standard Qt place
($HOME/.config/ You probably do not want to edit this by hand.
Recoll indexing options are set inside text configuration files located in a configuration directory. There can be several such
directories, each of which defines the parameters for one index.
The configuration files can be edited by hand or through the Index configuration dialog (Preferences menu). The GUI tool will
try to respect your formatting and comments as much as possible, so it is quite possible to use both ways.
The most accurate documentation for the configuration parameters is given by comments inside the default files, and we will just
give a general overview here.
By default, for each index, there are two sets of configuration files. System-wide configuration files are kept in a directory
named like /usr/[local/]share/recoll/examples, and define default values, shared by all indexes. For each index,
a parallel set of files defines the customized parameters.
Recoll user manual
46 / 56
In addition (as of Recoll version 1.19.7), it is possible to specify two additional configuration directories which will be stacked
before and after the user configuration directory. These are defined by the RECOLL_CONFTOP and RECOLL_CONFMID environment variables. Values from configuration files inside the top directory will override user ones, values from configuration
files inside the middle directory will override system ones and be overriden by user ones. These two variables may be of use to
applications which augment Recoll functionality, and need to add configuration data without disturbing the user’s files. Please
note that the two, currently single, values will probably be interpreted as colon-separated lists in the future: do not use colon
characters inside the directory paths.
The default location of the configuration is the .recoll directory in your home. Most people will only use this directory.
This location can be changed, or others can be added with the RECOLL_CONFDIR environment variable or the -c option
parameter to recoll and recollindex.
If the .recoll directory does not exist when recoll or recollindex are started, it will be created with a set of empty configuration
files. recoll will give you a chance to edit the configuration file before starting indexing. recollindex will proceed immediately.
To avoid mistakes, the automatic directory creation will only occur for the default location, not if -c or RECOLL_CONFDIR
were used (in the latter cases, you will have to create the directory).
All configuration files share the same format. For example, a short extract of the main configuration file might look as follows:
# Space-separated list of directories to index.
topdirs = ~/docs /usr/share/doc
defaultcharset = utf-8
There are three kinds of lines:
• Comment (starts with #) or empty.
• Parameter affectation (name = value).
• Section definition ([somedirname]).
Depending on the type of configuration file, section definitions either separate groups of parameters or allow redefining some
parameters for a directory sub-tree. They stay in effect until another section definition, or the end of file, is encountered. Some
of the parameters used for indexing are looked up hierarchically from the current directory location upwards. Not all parameters
can be meaningfully redefined, this is specified for each in the next section.
When found at the beginning of a file path, the tilde character (~) is expanded to the name of the user’s home directory, as a shell
would do.
White space is used for separation inside lists. List elements with embedded spaces can be quoted using double-quotes.
Encoding issues Most of the configuration parameters are plain ASCII. Two particular sets of values may cause encoding issues:
• File path parameters may contain non-ascii characters and should use the exact same byte values as found in the file system
directory. Usually, this means that the configuration file should use the system default locale encoding.
• The unac_except_trans parameter should be encoded in UTF-8. If your system locale is not UTF-8, and you need to also
specify non-ascii file paths, this poses a difficulty because common text editors cannot handle multiple encodings in a single
file. In this relatively unlikely case, you can edit the configuration file as two separate text files with appropriate encodings,
and concatenate them to create the complete configuration.
Environment variables
RECOLL_CONFDIR Defines the main configuration directory.
RECOLL_TMPDIR, TMPDIR Locations for temporary files, in this order of priority. The default if none of these is set is to
use /tmp. Big temporary files may be created during indexing, mostly for decompressing, and also for processing, e.g.
email attachments.
Recoll user manual
47 / 56
RECOLL_CONFTOP, RECOLL_CONFMID Allow adding configuration directories with priorities below and above the user
directory (see above the Configuration overview section for details).
RECOLL_EXTRA_DBS, RECOLL_ACTIVE_EXTRA_DBS Help for setting up external indexes. See this paragraph for explanations.
RECOLL_DATADIR Defines replacement for the default location of Recoll data files, normally found in, e.g., /usr/share/
RECOLL_FILTERSDIR Defines replacement for the default location of Recoll filters, normally found in, e.g., /usr/share/
ASPELL_PROG aspell program to use for creating the spelling dictionary. The result has to be compatible with the libaspell
which Recoll is using.
The main configuration file, recoll.conf
recoll.conf is the main configuration file. It defines things like what to index (top directories and things to ignore), and the
default character set to use for document types which do not specify it internally.
The default configuration will index your home directory. If this is not appropriate, start recoll to create a blank configuration,
click Cancel, and edit the configuration file before restarting the command. This will start the initial indexing, which may take
some time.
Most of the following parameters can be changed from the Index Configuration menu in the recoll interface. Some can only be
set by editing the configuration file.
Parameters affecting what documents we index:
topdirs Specifies the list of directories or files to index (recursively for directories). You can use symbolic links as elements
of this list. See the followLinks option about following symbolic links found under the top elements (not followed by
skippedNames A space-separated list of wilcard patterns for names of files or directories that should be completely ignored.
The list defined in the default file is:
skippedNames = #* bin CVS Cache cache* caughtspam tmp .thumbnails .svn \
*~ .beagle .git .hg .bzr .xsession-errors \
.recoll* xapiandb recollrc recoll.conf
The list can be redefined at any sub-directory in the indexed area.
The top-level directories are not affected by this list (that is, a directory in topdirs might match and would still be
The list in the default configuration does not exclude hidden directories (names beginning with a dot), which means that
it may index quite a few things that you do not want. On the other hand, email user agents like thunderbird usually store
messages in hidden directories, and you probably want this indexed. One possible solution is to have .* in skippedNa
mes, and add things like ~/.thunderbird or ~/.evolution in topdirs.
Not even the file names are indexed for patterns in this list. See the noContentSuffixes variable for an alternative
approach which indexes the file names.
noContentSuffixes This is a list of file name endings (not wildcard expressions, nor dot-delimited suffixes). Only the
names of matching files will be indexed (no attempt at MIME type identification, no decompression, no content indexing).
This can be redefined for subdirectories, and edited from the GUI. The default value is:
Recoll user manual
48 / 56
noContentSuffixes = .md5 .map \
.o .lib .dll .a .sys .exe .com \
.mpp .mpt .vsd \
.img .img.gz .img.bz2 .img.xz .image .image.gz .image.bz2 .image.xz \
.dat .bak .rdf .log.gz .log .db .msf .pid \
,v ~ #
skippedPaths and daemSkippedPaths A space-separated list of patterns for paths of files or directories that should be
skipped. There is no default in the sample configuration file, but the code always adds the configuration and database
directories in there.
skippedPaths is used both by batch and real time indexing. daemSkippedPaths can be used to specify things that
should be indexed at startup, but not monitored.
Example of use for skipping text files only in a specific directory:
skippedPaths = ~/somedir/*.txt
skippedPathsFnmPathname The values in the *skippedPaths variables are matched by default with fnmatch(3),
with the FNM_PATHNAME flag. This means that ’/’ characters must be matched explicitely. You can set skippedPat
hsFnmPathname to 0 to disable the use of FNM_PATHNAME (meaning that /*/dir3 will match /dir1/dir2/dir3).
zipSkippedNames A space-separated list of patterns for names of files or directories that should be ignored inside zip
archives. This is used directly by the zip handler, and has a function similar to skippedNames, but works independantly.
Can be redefined for filesystem subdirectories. For versions up to 1.19, you will need to update the Zip handler and install
a supplementary Python module. The details are described on the Recoll wiki.
followLinks Specifies if the indexer should follow symbolic links while walking the file tree. The default is to ignore
symbolic links to avoid multiple indexing of linked files. No effort is made to avoid duplication when this option is set
to true. This option can be set individually for each of the topdirs members by using sections. It can not be changed
below the topdirs level.
indexedmimetypes Recoll normally indexes any file which it knows how to read. This list lets you restrict the indexed
MIME types to what you specify. If the variable is unspecified or the list empty (the default), all supported types are
processed. Can be redefined for subdirectories.
excludedmimetypes This list lets you exclude some MIME types from indexing. Can be redefined for subdirectories.
compressedfilemaxkbs Size limit for compressed (.gz or .bz2) files. These need to be decompressed in a temporary
directory for identification, which can be very wasteful if ’uninteresting’ big compressed files are present. Negative means
no limit, 0 means no processing of any compressed file. Defaults to -1.
textfilemaxmbs Maximum size for text files. Very big text files are often uninteresting logs. Set to -1 to disable (default
textfilepagekbs If set to other than -1, text files will be indexed as multiple documents of the given page size. This may
be useful if you do want to index very big text files as it will both reduce memory usage at index time and help with loading
data to the preview window. A size of a few megabytes would seem reasonable (default: 1MB).
membermaxkbs This defines the maximum size in kilobytes for an archive member (zip, tar or rar at the moment). Bigger
entries will be skipped.
indexallfilenames Recoll indexes file names in a special section of the database to allow specific file names searches
using wild cards. This parameter decides if file name indexing is performed only for files with MIME types that would
qualify them for full text indexing, or for all files inside the selected subtrees, independently of MIME type.
usesystemfilecommand Decide if we execute a system command (file -i by default) as a final step for determining the
MIME type for a file (the main procedure uses suffix associations as defined in the mimemap file). This can be useful for
files with suffix-less names, but it will also cause the indexing of many bogus "text" files.
systemfilecommand Command to use for mime for mime type determination if usesystefilecommand is set. Recent
versions of xdg-mime sometimes work better than file.
Recoll user manual
49 / 56
processwebqueue If this is set, process the directory where Web browser plugins copy visited pages for indexing.
webqueuedir The path to the web indexing queue. This is hard-coded in the Firefox plugin as ~/.recollweb/ToIndex
so there should be no need to change it.
Parameters affecting how we generate terms:
Changing some of these parameters will imply a full reindex. Also, when using multiple indexes, it may not make sense to search
indexes that don’t share the values for these parameters, because they usually affect both search and index operations.
indexStripChars Decide if we strip characters of diacritics and convert them to lower-case before terms are indexed. If we
don’t, searches sensitive to case and diacritics can be performed, but the index will be bigger, and some marginal weirdness
may sometimes occur. The default is a stripped index (indexStripChars =1) for now. When using multiple indexes
for a search, this parameter must be defined identically for all. Changing the value implies an index reset.
maxTermExpand Maximum expansion count for a single term (e.g.: when using wildcards). The default of 10000 is reasonable and will avoid queries that appear frozen while the engine is walking the term list.
maxXapianClauses Maximum number of elementary clauses we can add to a single Xapian query. In some cases, the result
of term expansion can be multiplicative, and we want to avoid using excessive memory. The default of 100 000 should be
both high enough in most cases and compatible with current typical hardware configurations.
nonumbers If this set to true, no terms will be generated for numbers. For example "123", "1.5e6",, would not be
indexed ("value123" would still be). Numbers are often quite interesting to search for, and this should probably not be set
except for special situations, ie, scientific documents with huge amounts of numbers in them. This can only be set for a
whole index, not for a subtree.
dehyphenate Determines if, given an input of co-worker, we add a term for coworker. This possibility is new in version
1.22, and on by default. Setting the variable to off allows restoring the previous behaviour.
nocjk If this set to true, specific east asian (Chinese Korean Japanese) characters/word splitting is turned off. This will save
a small amount of cpu if you have no CJK documents. If your document base does include such text but you are not
interested in searching it, setting nocjk may be a significant time and space saver.
cjkngramlen This lets you adjust the size of n-grams used for indexing CJK text. The default value of 2 is probably appropriate in most cases. A value of 3 would allow more precision and efficiency on longer words, but the index will be
approximately twice as large.
indexstemminglanguages A list of languages for which the stem expansion databases will be built. See recollindex(1) or
use the recollindex -l command for possible values. You can add a stem expansion database for a different language by
using recollindex -s, but it will be deleted during the next indexing. Only languages listed in the configuration file are
defaultcharset The name of the character set used for files that do not contain a character set definition (ie: plain text
files). This can be redefined for any sub-directory. If it is not set at all, the character set used is the one defined by the nls
environment ( LC_ALL, LC_CTYPE, LANG), or iso8859-1 if nothing is set.
unac_except_trans This is a list of characters, encoded in UTF-8, which should be handled specially when converting
text to unaccented lowercase. For example, in Swedish, the letter a with diaeresis has full alphabet citizenship and
should not be turned into an a. Each element in the space-separated list has the special character as first element and the
translation following. The handling of both the lowercase and upper-case versions of a character should be specified, as
appartenance to the list will turn-off both standard accent and case processing. Example for Swedish:
unac_except_trans =
åå Åå ää Ää öö Öö
Note that the translation is not limited to a single character, you could very well have something like üue in the list.
The default value set for unac_except_trans can’t be listed here because I have trouble with SGML and UTF-8, but
it only contains ligature decompositions: german ss, oe, ae, fi, fl.
This parameter can’t be defined for subdirectories, it is global, because there is no way to do otherwise when querying. If
you have document sets which would need different values, you will have to index and query them separately.
Recoll user manual
50 / 56
maildefcharset This can be used to define the default character set specifically for email messages which don’t specify it.
This is mainly useful for readpst (libpst) dumps, which are utf-8 but do not say so.
localfields This allows setting fields for all documents under a given directory. Typical usage would be to set an "rclaptg"
field, to be used in mimeview to select a specific viewer. If several fields are to be set, they should be separated with a
semi-colon (’;’) character, which there is currently no way to escape. Also note the initial semi-colon. Example: localf
ields=;rclaptg=gnus;other =val, then select specifier viewer with mimetype|tag=... in mimeview.
testmodifusemtime If true, use mtime instead of default ctime to determine if a file has been modified (in addition to size,
which is always used). Setting this can reduce re-indexing on systems where extended attributes are modified (by some
other application), but not indexed (changing extended attributes only affects ctime). Notes:
• This may prevent detection of change in some marginal file rename cases (the target would need to have the same size
and mtime).
• You should probably also set noxattrfields to 1 in this case, except if you still prefer to perform xattr indexing, for
example if the local file update pattern makes it of value (as in general, there is a risk for pure extended attributes updates
without file modification to go undetected).
Perform a full index reset after changing the value of this parameter.
noxattrfields Recoll versions 1.19 and later automatically translate file extended attributes into document fields (to be
processed according to the parameters from the fields file). Setting this variable to 1 will disable the behaviour.
metadatacmds This allows executing external commands for each file and storing the output in Recoll document fields. This
could be used for example to index external tag data. The value is a list of field names and commands, don’t forget an
initial semi-colon. Example:
metadatacmds = ; tags = tmsu tags %f; otherfield = somecmd -xx %f
As a specially disgusting hack brought by Recoll 1.19.7, if a "field name" begins with rclmulti, the data returned by
the command is expected to contain multiple field values, in configuration file format. This allows setting several fields by
executing a single command. Example:
metadatacmds = ; rclmulti1 = somecmd %f
If somecmd returns data in the form of:
field1 = value1
field2 = value for field2
field1 and field2 will be set inside the document metadata.
Parameters affecting where and how we store things:
dbdir The name of the Xapian data directory. It will be created if needed when the index is initialized. If this is not an absolute
path, it will be interpreted relative to the configuration directory. The value can have embedded spaces but starting or
trailing spaces will be trimmed. You cannot use quotes here.
idxstatusfile The name of the scratch file where the indexer process updates its status. Default: idxstatus.txt inside
the configuration directory.
maxfsoccuppc Maximum file system occupation before we stop indexing. The value is a percentage, corresponding to what
the "Capacity" df output column shows. The default value is 0, meaning no checking.
mboxcachedir The directory where mbox message offsets cache files are held. This is normally $RECOLL_CONFDIR/mboxcache,
but it may be useful to share a directory between different configurations.
mboxcacheminmbs The minimum mbox file size over which we cache the offsets. There is really no sense in caching offsets
for small files. The default is 5 MB.
Recoll user manual
51 / 56
webcachedir This is only used by the web browser plugin indexing code, and defines where the cache for visited pages will
live. Default: $RECOLL_CONFDIR/webcache
webcachemaxmbs This is only used by the web browser plugin indexing code, and defines the maximum size for the web
page cache. Default: 40 MB. Quite unfortunately, this is only taken into account when creating the cache file. You need to
delete the file for a change to be taken into account.
idxflushmb Threshold (megabytes of new text data) where we flush from memory to disk index. Setting this can help control
memory usage. A value of 0 means no explicit flushing, letting Xapian use its own default, which is flushing every
10000 (or XAPIAN_FLUSH_THRESHOLD) documents, which gives little memory usage control, as memory usage also
depends on average document size. The default value is 10, and it is probably a bit low. If your system usually has free
memory, you can try higher values between 20 and 80. In my experience, values beyond 100 are always counterproductive.
Parameters affecting multithread processing
The Recoll indexing process recollindex can use multiple threads to speed up indexing on multiprocessor systems. The work
done to index files is divided in several stages and some of the stages can be executed by multiple threads. The stages are:
1. File system walking: this is always performed by the main thread.
2. File conversion and data extraction.
3. Text processing (splitting, stemming, etc.)
4. Xapian index update.
You can also read a longer document about the transformation of Recoll indexing to multithreading.
The threads configuration is controlled by two configuration file parameters.
thrQSizes This variable defines the job input queues configuration. There are three possible queues for stages 2, 3 and 4, and
this parameter should give the queue depth for each stage (three integer values). If a value of -1 is used for a given stage,
no queue is used, and the thread will go on performing the next stage. In practise, deep queues have not been shown to
increase performance. A value of 0 for the first queue tells Recoll to perform autoconfiguration (no need for the two other
values in this case) - this is the default configuration.
thrTCounts This defines the number of threads used for each stage. If a value of -1 is used for one of the queue depths, the
corresponding thread count is ignored. It makes no sense to use a value other than 1 for the last stage because updating the
Xapian index is necessarily single-threaded (and protected by a mutex).
The following example would use three queues (of depth 2), and 4 threads for converting source documents, 2 for processing
their text, and one to update the index. This was tested to be the best configuration on the test system (quadri-processor with
multiple disks).
thrQSizes = 2 2 2
thrTCounts = 4 2 1
The following example would use a single queue, and the complete processing for each document would be performed by a
single thread (several documents will still be processed in parallel in most cases). The threads will use mutual exclusion when
entering the index update stage. In practise the performance would be close to the precedent case in general, but worse in certain
cases (e.g. a Zip archive would be performed purely sequentially), so the previous approach is preferred. YMMV... The 2 last
values for thrTCounts are ignored.
thrQSizes = 2 -1 -1
thrTCounts = 6 1 1
The following example would disable multithreading. Indexing will be performed by a single thread.
thrQSizes = -1 -1 -1
Recoll user manual
52 / 56
Miscellaneous parameters:
autodiacsens IF the index is not stripped, decide if we automatically trigger diacritics sensitivity if the search term has
accented characters (not in unac_except_trans). Else you need to use the query language and the D modifier to
specify diacritics sensitivity. Default is no.
autocasesens IF the index is not stripped, decide if we automatically trigger character case sensitivity if the search term has
upper-case characters in any but the first position. Else you need to use the query language and the C modifier to specify
character-case sensitivity. Default is yes.
loglevel,daemloglevel Verbosity level for recoll and recollindex. A value of 4 lists quite a lot of debug/information
messages. 2 only lists errors. The daemversion is specific to the indexing monitor daemon.
logfilename, daemlogfilename Where the messages should go. ’stderr’ can be used as a special value, and is the
default. The daemversion is specific to the indexing monitor daemon.
checkneedretryindexscript This defines the name for a command executed by recollindex when starting indexing. If
the exit status of the command is 0, recollindex retries to index all files which previously could not be indexed because
of data extraction errors. The default value is a script which checks if any of the common bin directories have changed
(indicating that a helper program may have been installed).
mondelaypatterns This allows specify wildcard path patterns (processed with fnmatch(3) with 0 flag), to match files which
change too often and for which a delay should be observed before re-indexing. This is a space-separated list, each entry
being a pattern and a time in seconds, separated by a colon. You can use double quotes if a path entry contains white space.
mondelaypatterns = *.log:20 "this one has spaces*:10"
monixinterval Minimum interval (seconds) for processing the indexing queue. The real time monitor does not process each
event when it comes in, but will wait this time for the queue to accumulate to diminish overhead and in order to aggregate
multiple events to the same file. Default 30 S.
monauxinterval Period (in seconds) at which the real time monitor will regenerate the auxiliary databases (spelling, stemming) if needed. The default is one hour.
monioniceclass, monioniceclassdata
class 3, no data).
These allow defining the ionice class and data used by the indexer (default
filtermaxseconds Maximum handler execution time, after which it is aborted. Some postscript programs just loop...
filtermaxmbytes Recoll 1.20.7 and later. Maximum handler memory utilisation. This uses setrlimit(RLIMIT_AS) on most
systems (total virtual memory space size limit). Some programs may start with 500 MBytes of mapped shared libraries, so
take this into account when choosing a value. The default is a liberal 2000MB.
filtersdir A directory to search for the external input handler scripts used to index some types of files. The value should
not be changed, except if you want to modify one of the default scripts. The value can be redefined for any sub-directory.
iconsdir The name of the directory where recoll result list icons are stored. You can change this if you want different images.
idxabsmlen Recoll stores an abstract for each indexed file inside the database. The text can come from an actual ’abstract’
section in the document or will just be the beginning of the document. It is stored in the index so that it can be displayed
inside the result lists without decoding the original file. The idxabsmlen parameter defines the size of the stored abstract.
The default value is 250 bytes. The search interface gives you the choice to display this stored text or a synthetic abstract
built by extracting text around the search terms. If you always prefer the synthetic abstract, you can reduce this value and
save a little space.
idxmetastoredlen Maximum stored length for metadata fields. This does not affect indexing (the whole field is processed
anyway), just the amount of data stored in the index for the purpose of displaying fields inside result lists or previews. The
default value is 150 bytes which may be too low if you have custom fields.
Recoll user manual
53 / 56
aspellLanguage Language definitions to use when creating the aspell dictionary. The value must match a set of aspell
language definition files. You can type "aspell config" to see where these are installed (look for data-dir). The default if
the variable is not set is to use your desktop national language environment to guess the value.
noaspell If this is set, the aspell dictionary generation is turned off. Useful for cases where you don’t need the functionality
or when it is unusable because aspell crashes during dictionary generation.
mhmboxquirks This allows definining location-related quirks for the mailbox handler. Currently only the tbird flag is
defined, and it should be set for directories which hold Thunderbird data, as their folder format is weird. Example:
mhmboxquirks = tbird
It should be noted that later Recoll versions have improved automatic detection of Thunderbird folders, so that this should
not be needed at all in most cases.
The fields file
This file contains information about dynamic fields handling in Recoll. Some very basic fields have hard-wired behaviour, and,
mostly, you should not change the original data inside the fields file. But you can create custom fields fitting your data and
handle them just like they were native ones.
The fields file has several sections, which each define an aspect of fields processing. Quite often, you’ll have to modify several
sections to obtain the desired behaviour.
We will only give a short description here, you should refer to the comments inside the default file for more detailed information.
Field names should be lowercase alphabetic ASCII.
[prefixes] A field becomes indexed (searchable) by having a prefix defined in this section.
[stored] A field becomes stored (displayable inside results) by having its name listed in this section (typically with an empty
[aliases] This section defines lists of synonyms for the canonical names used inside the [prefixes] and [stored] sections
[queryaliases] This section also defines aliases for the canonic field names, with the difference that the substitution will only be
used at query time, avoiding any possibility that the value would pick-up random metadata from documents.
handler-specific sections Some input handlers may need specific configuration for handling fields. Only the email message
handler currently has such a section (named [mail]). It allows indexing arbitrary email headers in addition to the ones
indexed by default. Other such sections may appear in the future.
Here follows a small example of a personal fields file. This would extract a specific email header and use it as a searchable
field, with data displayable inside result lists. (Side note: as the email handler does no decoding on the values, only plain ascii
headers can be indexed, and only the first occurrence will be used for headers that occur several times).
# Index mailmytag contents (with the given prefix)
mailmytag = XMTAG
# Store mailmytag inside the document data record (so that it can be
# displayed - as %(mailmytag) - in result lists).
mailmytag =
filename = fn
containerfilename = cfn
# Extract the X-My-Tag mail header, and use it internally with the
# mailmytag field name
x-my-tag = mailmytag
Recoll user manual
54 / 56
Extended attributes in the fields file
Recoll versions 1.19 and later process user extended file attributes as documents fields by default.
Attributes are processed as fields of the same name, after removing the user prefix on Linux.
The [xattrtofields] section of the fields file allows specifying translations from extended attributes names to Recoll
field names. An empty translation disables use of the corresponding attribute data.
The mimemap file
mimemap specifies the file name extension to MIME type mappings.
For file names without an extension, or with an unknown one, the system’s file -i command will be executed to determine the
MIME type (this can be switched off inside the main configuration file).
The mappings can be specified on a per-subtree basis, which may be useful in some cases. Example: gaim logs have a .txt
extension but should be handled specially, which is possible because they are usually all located in one place.
The recoll_noindex mimemap variable has been moved to recoll.conf and renamed to noContentSuffixes,
while keeping the same function, as of Recoll version 1.21. For older Recoll versions, see the documentation for noContentS
uffixes but use recoll_noindex in mimemap.
The mimeconf file
mimeconf specifies how the different MIME types are handled for indexing, and which icons are displayed in the recoll result
Changing the parameters in the [index] section is probably not a good idea except if you are a Recoll developer.
The [icons] section allows you to change the icons which are displayed by recoll in the result lists (the values are the basenames
of the png images inside the iconsdir directory (specified in recoll.conf).
The mimeview file
mimeview specifies which programs are started when you click on an Open link in a result list. Ie: HTML is normally displayed
using firefox, but you may prefer Konqueror, your program might be named oofice instead of openoffice etc.
Changes to this file can be done by direct editing, or through the recoll GUI preferences dialog.
If Use desktop preferences to choose document editor is checked in the Recoll GUI preferences, all mimeview entries will be
ignored except the one labelled application/x-all (which is set to use xdg-open by default).
In this case, the xallexcepts top level variable defines a list of MIME type exceptions which will be processed according to
the local entries instead of being passed to the desktop. This is so that specific Recoll options such as a page number or a search
string can be passed to applications that support them, such as the evince viewer.
As for the other configuration files, the normal usage is to have a mimeview inside your own configuration directory, with just
the non-default entries, which will override those from the central configuration file.
All viewer definition entries must be placed under a [view] section.
The keys in the file are normally MIME types. You can add an application tag to specialize the choice for an area of the filesystem
(using a localfields specification in mimeconf). The syntax for the key is mimetype|tag
The nouncompforviewmts entry, (placed at the top level, outside of the [view] section), holds a list of MIME types that
should not be uncompressed before starting the viewer (if they are found compressed, ie: mydoc.doc.gz).
The right side of each assignment holds a command to be executed for opening the file. The following substitutions are performed:
• %D Document date
Recoll user manual
55 / 56
• %f File name. This may be the name of a temporary file if it was necessary to create one (ie: to extract a subdocument from a
• %i Internal path, for subdocuments of containers. The format depends on the container type. If this appears in the command
line, Recoll will not create a temporary file to extract the subdocument, expecting the called application (possibly a script) to
be able to handle it.
• %M MIME type
• %p Page index. Only significant for a subset of document types, currently only PDF, Postscript and DVI files. Can be used to
start the editor at the right page for a match or snippet.
• %s Search term. The value will only be set for documents with indexed page numbers (ie: PDF). The value will be one of the
matched search terms. It would allow pre-setting the value in the "Find" entry inside Evince for example, for easy highlighting
of the term.
• %u Url.
In addition to the predefined values above, all strings like %(fieldname) will be replaced by the value of the field named
fieldname for the document. This could be used in combination with field customisation to help with opening the document.
The ptrans file
ptrans specifies query-time path translations. These can be useful in multiple cases.
The file has a section for any index which needs translations, either the main one or additional query indexes. The sections
are named with the Xapian index directory names. No slash character should exist at the end of the paths (all comparisons are
textual). An exemple should make things sufficiently clear
/this/directory/moved = /to/this/place
/server/volume1/docdir = /net/server/volume1/docdir
/server/volume2/docdir = /net/server/volume2/docdir
Examples of configuration adjustments
Adding an external viewer for an non-indexed type
Imagine that you have some kind of file which does not have indexable content, but for which you would like to have a functional
Open link in the result list (when found by file name). The file names end in .blob and can be displayed by application
blobviewer .
You need two entries in the configuration files for this to work:
• In $RECOLL_CONFDIR/mimemap (typically ~/.recoll/mimemap), add the following line:
.blob = application/x-blobapp
Note that the MIME type is made up here, and you could call it diesel/oil just the same.
• In $RECOLL_CONFDIR/mimeview under the [view] section, add:
application/x-blobapp = blobviewer %f
We are supposing that blobviewer wants a file name parameter here, you would use %u if it liked URLs better.
If you just wanted to change the application used by Recoll to display a MIME type which it already knows, you would just need
to edit mimeview. The entries you add in your personal file override those in the central configuration, which you do not need
to alter. mimeview can also be modified from the Gui.
Recoll user manual
56 / 56
Adding indexing support for a new file type
Let us now imagine that the above .blob files actually contain indexable text and that you know how to extract it with a command
line program. Getting Recoll to index the files is easy. You need to perform the above alteration, and also to add data to the
mimeconf file (typically in ~/.recoll/mimeconf):
• Under the [index] section, add the following line (more about the rclblob indexing script later):
application/x-blobapp = exec rclblob
• Under the [icons] section, you should choose an icon to be displayed for the files inside the result lists. Icons are normally
64x64 pixels PNG files which live in /usr/[local/]share/recoll/images.
• Under the [categories] section, you should add the MIME type where it makes sense (you can also create a category).
Categories may be used for filtering in advanced search.
The rclblob handler should be an executable program or script which exists inside /usr/[local/]share/recoll/
filters. It will be given a file name as argument and should output the text or html contents on the standard output.
The filter programming section describes in more detail how to write an input handler.
Download PDF